Sunteți pe pagina 1din 3

The University of Texas at Dallas Fall 2006

Electrical Engineering Department

EE3311 Electronic Circuits


Instructor: Dr. Ricardo Saad
Office: ECN2.506
Email: rsaad@utdallas.edu
Phone: (972) 883-4751

Course Syllabus
Class Schedule:
Tuesdays and Thursdays: 5:30 p.m. to 6:45 p.m.
Location: GR2.530
Recitation classes (optional but highly recommended): TBD
Pre-requisites:
EE3301, EE3302, EE3310
Consultation:
Tuesdays-Thursdays: 8:30 p.m.-9:30 p.m. (or by appointment)
Room: ECSN 2.506
Exams:
Assignments: 10 %
Class notes: 10%
Spice Simulations: 5%
Exam 1: 25% (Date: Sept 14, 2006)
Exam 2: 25% (Date: Oct. 19, 2006)
Final Exam: 25%
Miscellaneous
• Students that decide to drop the course should do it on the datelines scheduled
in the UTD Calendar.
• Drop forms are available from the Undergraduate Office.

Course Objectives
• Ability to perform DC analysis of circuits with nonlinear elements (Diode, FET,
and BJT)
• Ability to design biasing circuit for circuits with nonlinear elements
• Ability to apply small signal model of nonlinear elements for circuit analysis and
design
• Ability to analyze and design the three configurations of signal transistor
amplifiers
• Ability to analyze and design differential amplifiers
• Ability to analyze and design circuits with ideal operational amplifiers
• Ability to analyze frequency response of simpler amplifiers
• Ability to apply the feedback concept in the analysis and design of amplifiers
• Ability to use SPICE as circuit simulation tool to analyze and design circuits

1
The University of Texas at Dallas Fall 2006
Electrical Engineering Department

Course Content:
1. Operational Amplifiers
o The ideal Op-amp
o Differential and Common Mode Signals
o The inverting configuration
o The non-inverting configuration
o Difference Amplifiers
o Effect of Finite Open-Loop Gain, Bandwidth, Offset Bias Current
o Integrators and Differentiators
2. Diodes
o The ideal diode
o Terminal characteristics of junction diodes
o Modeling the diode forward characteristic
o Operation in the reverse breakdown region - Zener diodes
o Rectifier circuits
3. MOS Field-Effect Transistors (MOSFTETs)
o Device Structure and Physical Operation
o Current-Voltage Characteristics
o MOSFET Circuits at DC
o Biasing in MOS Amplifiers Circuits
o Small-Signal Operation and Models
o Single-Stage MOS Amplifiers
o The MOSFET Internal Capacitances and High-Frequency Model
o Frequency Response of the CS Amplifier
4. Bipolar Junction Transistors (BJTs)
o Device Structure and Physical Operation
o Current-Voltage Characteristics
o The BJT as an Amplifier and as a Switch
o BJT Circuits at DC
o Biasing in BJT Amplifier Circuits
o Small Signal Operation and Models
o Single-Stage BJT Amplifiers
o The BJT Internal Capacitances and High-Frequency Model
o Frequency Response of the Common-Emitter Amplifier
5. Single-Stage Integrated-Circuit Amplifiers
o The Cascode Amplifier
o The Source and Emitter Follower
o Current-Mirror Circuits
6. Differential and Multistage Amplifiers
o The MOS-Differential Pair
o The Small-Signal Operation of the MOS Differential Pair
o The BJT Differential Pair
7. Feedback
o The General Feedback Structure
o Properties of Negative Feedback
o Basic Feedback Topologies

2
The University of Texas at Dallas Fall 2006
Electrical Engineering Department

Required Textbook:
Title: Microelectronic Circuits
Edition: 5th
Authors: Sedra and Smith
ISBN: 0-19-5142519
Publisher: Oxford University Press

Scholastic integrity
The value of an academic degree rests in large measure on the absolute integrity of
the work done by the student to earn that degree. It is imperative that each student
maintain a high standard of individual honesty and integrity in his/her academic
work. Scholastic dishonesty at the University of Texas includes, but is not limited to,
plagiarism and/or collusion. Scholastic dishonesty will not be tolerated under any
circumstances.

S-ar putea să vă placă și