Documente Academic
Documente Profesional
Documente Cultură
DEMO INSTRUCTION
No
1 ( 19 )
Date
Rev
2002-05-27
Reference
A4 XSEIF R2
Page
1
1.1
1.2
1.3
1.4
1.5
GENERAL ... .. ... ... .. ... .. ... ... .. ... .. ... ... .. ... ... .. ... .. ... ... .. ... .. ... ... ..
Application ... .. ... ... .. ... .. ... ... .. ... .. ... ... .. ... ... .. ... .. ... ... .. ... .. ... ... ..
Features ... ... .. ... ... .. ... .. ... ... .. ... .. ... ... .. ... ... .. ... .. ... ... .. ... .. ... ... ..
Introduction .. .. ... ... .. ... .. ... ... .. ... .. ... ... .. ... ... .. ... .. ... ... .. ... .. ... ... ..
Concepts .. ... .. ... ... .. ... .. ... ... .. ... .. ... ... .. ... ... .. ... .. ... ... .. ... .. ... ... ..
Commands and Printouts . ... ... .. ... .. ... ... .. ... ... .. ... .. ... ... .. ... .. ... ... ..
2
2
2
2
2
3
2
2.1
2.2
2.3
DEMO PREPARATION .. .. ... ... .. ... .. ... ... .. ... ... .. ... .. ... ... .. ... .. ... ... ..
Demo Prerequisites . .. ... .. ... ... .. ... .. ... ... .. ... ... .. ... .. ... ... .. ... .. ... ... ..
Demo Aid Requirements .. ... ... .. ... .. ... ... .. ... ... .. ... .. ... ... .. ... .. ... ... ..
Preparation of Demo Parameter Values . ... .. ... ... .. ... .. ... ... .. ... .. ... ... ..
4
4
4
5
3
3.1
3.2
3.3
3.4
3.5
DEMO EXECUTION .. ... .. ... ... .. ... .. ... ... .. ... ... .. ... .. ... ... .. ... .. ... ... .. 6
SU-130 : Calling Line Identification Presentation .. .. ... .. ... ... .. ... .. ... ... .. 6
SU-131 : Calling Line Identification Restriction . ... .. ... .. ... ... .. ... .. ... ... .. 7
SU-132 : Calling Line Identification Restriction (Temporary Presentation) . 9
SU-133 : Calling Line Identification Restriction (Temporary Restriction) .. .. 11
SU-134 : Calling Line Identification Presentation (Override category) . ... .. 14
HELPFUL HINTS ... .. ... .. ... ... .. ... .. ... ... .. ... ... .. ... .. ... ... .. ... .. ... ... .. 17
ABBREVIATIONS .. .. ... .. ... ... .. ... .. ... ... .. ... ... .. ... .. ... ... .. ... .. ... ... .. 18
DEMO CASE SUMMARY LIST .. ... .. ... ... .. ... ... .. ... .. ... ... .. ... .. ... ... .. 19
DEMO INSTRUCTION
No
2 ( 19 )
GENERAL
1.1
Application
Date
Rev
2002-05-27
Reference
1.2
1.3
Features
NF 91.2
NF 148.1
NF 1014.1
Introduction
The Calling Line Identification services are supplementary services that allow
to transfer the line identity (MSISDN or ISDN number) between subscribers.
The Calling Line Identification services are:
Calling Line Identification Presentation. Calling service provides the called
mobile subscriber with the possibility to receive the calling subscribers identity.
Calling Line Identification Restriction. Calling service enables the calling
mobile subscriber to prevent presentation of his/hers line identity to the called
subscriber on a permanent or temporary basis.
Calling Line Identification Presentation, Override Category. Calling service
provides the called mobile subscriber with the possibility to receive the calling
subscribers identity even when the calling subscriber has the Calling Line
Identification Restricted service.
Only for UMTS: Cause of no Calling Line IdentificationIf activated, the
reason for not presenting the CLI should be provided to the called subscriber
e.g. rejected by user, unavailable, interaction with other service, payphone.
(This Demo Instruction will only show reason Rejected by user, as this is an
example of what can be presented by this feature.)
1.4
Concepts
-
DEMO INSTRUCTION
No
Date
Rev
2002-05-27
1.5
1.5.1
Commands
1.5.2
3 ( 19 )
Reference
HGSDC
HGSDP
MGSLP
Printouts
HLR SUBSCRIBER DATA
MT MOBILE SUBSCRIBER LIST
DEMO INSTRUCTION
No
4 ( 19 )
Approved
Checked
Date
Rev
2002-05-27
DEMO PREPARATION
2.1
Demo Prerequisites
Reference
Ensure that all node elements are operating to a satisfactory level. Clear any
major or service affecting alarms prior to demo execution.
Ensure that there is a current dump available for all nodes.
Make basic test calls to verify network configuration operation.
Check all B-Number is correct for MS/UE number series.
Check IMSIs are defined on HLR for all MS/UE.
2.2
2.2.1
Hardware Tools
Two MS/UE with calling line identification capability.
For the purpose of this demo execution, Mobile Stations will be used in all
cases.
For all Demo Cases in this document refer to the manual for the MS being used
for feature activation. Follow the instructions provided. It is often possible to
activate, interrogate and deactivate through a MENU in the MS.
2.2.2
Software Tools
-
2.2.3
Network Configuration
MS/
UE1
MS/
UE2
MSC Server
MGW
Figure 1
BSC/RNC
RBS
DEMO INSTRUCTION
No
5 ( 19 )
Date
Rev
2002-05-27
2.3
2.3.1
Reference
2.3.2
2.3.3
Check of Data
-
DEMO INSTRUCTION
No
6 ( 19 )
Approved
Checked
Date
Rev
2002-05-27
Reference
DEMO EXECUTION
3.1
________________________________________________________
2.
________________________________________________________
3.
DEMO INSTRUCTION
No
7 ( 19 )
Approved
Checked
Date
Rev
2002-05-27
Reference
________________________________________________________
5.
________________________________________________________
6.
________________________________________________________
3.2
DEMO INSTRUCTION
No
8 ( 19 )
Approved
Checked
Date
Rev
2002-05-27
Reference
Result:
EXECUTED
Comment: Activation occurs implicitly as a result of provision.
________________________________________________________
2.
________________________________________________________
3.
________________________________________________________
4.
________________________________________________________
DEMO INSTRUCTION
No
Approved
Checked
5.
9 ( 19 )
Date
Rev
2002-05-27
Reference
________________________________________________________
3.3
________________________________________________________
2.
________________________________________________________
3.
DEMO INSTRUCTION
No
10 ( 19 )
Approved
Checked
Date
Rev
2002-05-27
Reference
MGSLP:IMSI=imsi1, ALL;
Result:
MT MOBILE SUBSCRIBER LIST
SUBSCRIBER NON SUPPLEMENTARY SERVICE DATA
SUBSCRIBER SUPPLEMENTARY SERVICE DATA
with Supplementary Service CLIR-TA in status PAO
________________________________________________________
4.
________________________________________________________
5.
________________________________________________________
6.
Action: Verify what prefix (i.e. code) is used to restrict the permission to
show the callers MSISDN. (DSO=5 used for analysis of CLIR)
ANGSP:DSO=5;
Result:
GENERAL PURPOSE DIGIT ANALYSIS DATA
Comment: Look for prefix (S) which corresponds to parameter PCL-1
(CLIR invocation).
________________________________________________________
7.
Action: Establish a call from MS1 to MS2 where MS1 restricts the
permission to show its MSISDN. (NOTE! The code # 31 # below, is only
an example. Verify code in switch concerned.)
Dial # 31 # msisdn2
Or activate service from MS menu.
Result: Verify that MS2 does NOT receive the line identification of MS1
during alerting.
DEMO INSTRUCTION
No
11 ( 19 )
Approved
Checked
Date
Rev
2002-05-27
Reference
________________________________________________________
9.
________________________________________________________
3.4
________________________________________________________
2.
DEMO INSTRUCTION
No
12 ( 19 )
Approved
Checked
Date
Rev
2002-05-27
Reference
Result:
HLR SUBSCRIBER DATA
PERMANENT SUBSCRIBER DATA
SUPPLEMENTARY SERVICE DATA
with Supplementary Services CLIR-1 and SOCLIR-1
________________________________________________________
3.
________________________________________________________
4.
________________________________________________________
5.
DEMO INSTRUCTION
No
13 ( 19 )
Approved
Checked
Date
Rev
2002-05-27
Reference
________________________________________________________
7.
________________________________________________________
8.
Action: Verify what prefix (i.e. code) is used to restrict the permission to
show the callers MSISDN. (DSO=5 used for analysis of CLIR)
ANGSP:DSO=5;
Result:
GENERAL PURPOSE DIGIT ANALYSIS DATA
Comment: Look for the prefix (S) which corresponds to parameter PCL-0
(CLIR suppression).
________________________________________________________
9.
Action: Establish a call from MS1 to MS2 where MS1 gives the permission
to show its MSISDN. (NOTE! The code * 31 # below, is only an example.
Verify code in switch concerned.)
Dial * 31 # msisdn2
Or activate service from MS menu.
Result: Verify that MS2 receives the line identification of MS1 during
alerting.
________________________________________________________
DEMO INSTRUCTION
No
14 ( 19 )
Approved
Checked
Date
Rev
2002-05-27
Reference
10. Action: Verify the speech path and release the call.
________________________________________________________
11. Action: Set SOCLIR to 0 for MS1.
HGSDC:MSISDN=msisdn1, SUD=SOCLIR-0;
Result:
EXECUTED
________________________________________________________
3.5
________________________________________________________
2.
DEMO INSTRUCTION
No
15 ( 19 )
Approved
Checked
Date
Rev
2002-05-27
Reference
________________________________________________________
4.
________________________________________________________
5.
DEMO INSTRUCTION
No
16 ( 19 )
Date
Rev
2002-05-27
Reference
________________________________________________________
6.
________________________________________________________
7.
________________________________________________________
8.
Action: Restore all the services provided for MS1 and MS2.
________________________________________________________
DEMO INSTRUCTION
No
HELPFUL HINTS
-
17 ( 19 )
Date
Rev
2002-05-27
Reference
DEMO INSTRUCTION
No
18 ( 19 )
Date
Rev
2002-05-27
Reference
ABBREVIATIONS
CFU
CLIP
CLIR
FNUM
Forward to Number
GSM
ISDN
ISUP
MS
Mobile Station
MSC
MSISDN
PAO
SOCFU
SOCLIP
SOCLIR
SS
Supplementary Service
SUD
Subscriber Data
DEMO INSTRUCTION
No
19 ( 19 )
Date
Rev
2002-05-27
Reference
Table 1
Demo
Case
no.
Date
SU-130
Demo
Appl
Y
Test bed /
SW status
Log files
Comments
SU-131
Log files
Comments
SU-132
Log files
Comments
SU-133
Log files
Comments
SU-134
Log files
Comments
Appendix:
Demo performed by:
Result:
Passed
Failed
PR
Demo
Result
Sign. of
Tester
Trouble
Report
Issued