Documente Academic
Documente Profesional
Documente Cultură
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
790 960
65
65
65
0 1 4
0 8
0 8
742270V03
Type No.
Frequency range
Polarization
Gain (dBi)
Tilt
Horizontal Pattern:
Half-power beam width
Front-to-back ratio, copolar
Cross polar ratio
Maindirection
0
Sector
60
Tracking, Avg.
Squint
Vertical Pattern:
Half-power beam width
Electrical tilt, contin. adjust.
Sidelobe suppression for first
sidelobe above main beam avg.
Impedance
VSWR
Isolation: Intrasystem
Isolation: Intersystem
790960
790 862 MHz
880 960 MHz
+45, 45
+45, 45
14.4 ... 14.3 ... 14.0 14.8 ... 14.7 ... 14.2
0 ... 7 ... 14
0 ... 7 ... 14
68
> 30 dB
Typically:
25 dB
> 10 dB
65
> 30 dB
Typically:
25 dB
> 10 dB
1.0 dB
2.0
16.5
15.3
0 14
0 ... 7 ... 14 T
0 ... 7 ... 14 T
17 ... 16 ... 15 dB
17 ... 18 ... 17 dB
1710 1880
1710 1880 MHz
+45, 45
16.8 ... 16.9 ... 16.6
0 ... 4 ... 8
1920 2170
1920 2170 MHz
+45, 45
16.9 ... 17.0 ... 16.7
0 ... 4 ... 8
65
> 32 dB
Typically:
25 dB
> 10 dB
0.5 dB
3.0
61
> 32 dB
Typically:
25 dB
> 10 dB
0.5 dB
3.0
7.4
0 8
0 ... 4 ... 8 T
17 ... 17 ... 16 dB
6.7
0 8
0 ... 4 ... 8 T
16 ... 16 ... 15 dB
50
50
< 1.5
< 1.5
> 30 dB
> 30 dB
Typically: > 50 dB (790 960 // 1710 1880 MHz)11
Typically: > 50 dB (790 960 // 1920 2170 MHz)11
> 30 dB (1710 1880 // 1920 2170 MHz)
< 150 dBc
< 150 dBc
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power per input
Total power
500 W*
1000 W*
50
< 1.5
> 30 dB
200 W*
200 W*
400 W*
400 W*
* (at 50 C ambient temperature)
1710 1880
45
65
16
10
Horizontal Pattern
Vertical Pattern
0 14 electrical downtilt
7-16
10
10
Adjustment
mechanism
dB
dB
Wind load
3
Horizontal Pattern
Vertical Pattern
0 8 electrical downtilt
Horizontal Pattern
Internet: www.kathrein.de
Vertical Pattern
0 8 electrical downtilt
Bottom
3x, Position bottom
continuously adjustable
Frontal:
Lateral:
Rearside:
Height/width/depth
Category of
mounting hardware
M (Medium)
Weight
Scope of supply
dB
7-16
Packing size
10
10
7-16
Connector position
7.4
120
7-16 7-16
Mechanical specifications
Input
65
dB
Subject to alteration.
125
936.3859/b
7-16
dB
790 960
+45
10
dB
790 960
45
1710 1880
+45
19 kg / 21 kg (clamps incl.)
1696 x 282 x 182 mm
Panel and 2 units of clamps
for 50 115 mm diameter
742270V03 Page 1 of 2
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973
Accessories
General Information
1.0 kg
1
1
1
1
Mast: 28 60 mm diameter
Mast: 110 220 mm diameter
Mast: 210 380 mm diameter
Downtilt angle: 0 14.5
0.8
2.7
4.8
2.8
731651
85010002
85010003
737978
clamp
clamp
clamp
downtilt kit
kg
kg
kg
kg
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit.
Wall mounting: No additional mounting kit needed.
Material:
Grounding:
The metal parts of the antenna including the mounting kit and the inner
conductors are DC grounded.
Environmental conditions: Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E.
The antennas exceed this standard with regard to the following items:
Low temperature: 55 C
High temperature (dry): +60 C
Adjustment mechanism
with integrated scale
Ice protection: Due to the very sturdy antenna construction and the
protection of the radiating system by the radome, the antenna remains
operational even under icy conditions.
Environmental tests:
1455
1 clamp
738546
1417
Weight
approx.
Description
72
64
1384
Remarks
Type No.
Accessories
49
46
108
167*
146*
Layout of interface:
60
261*
Please note:
Bottom view
* Dimensions refer to radome
As a result of more stringent legal regulations and judgements regarding product liability, we are
obliged to point out certain risks that may arise when products are used under extraordinary operating
conditions.
The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4 and thereby
respects the static mechanical load imposed on an antenna by wind at maximum velocity. Wind loads are
calculated according to DIN 1055-4. Extraordinary operating conditions, such as heavy icing or exceptional
dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna
or even cause it to fall to the ground. These facts must be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety
regulations.
The details given in our data sheets have to be followed carefully when installing the antennas and
accessories.
The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers
must be obeyed.
Any previous datasheet issues have now become invalid.
Page 2 of 2 742270V03
Internet: www.kathrein.de
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973
936.3859/b
184
Subject to alteration.
167