Documente Academic
Documente Profesional
Documente Cultură
ServicePortal
Knowledge Center
Affected Products
Network Security Sensor Appliance 7.1.x
Network Security Sensor Appliance 6.x (EOL)
Rated:
Environment
McAfee I-Series Sensor Hardware
McAfee M-Series Sensor Hardware
Summary
This article explains how to downgrade the installed software on a Sensor.
Solution
IMPORTANT: The configuration process for the Sensor, including the Shared Secret, TFTP server configuration, update process, and all
other settings, is documented in the product documentation specific to your Sensor Software and Hardware version. McAfee recommends
consulting the Quick Start guide and the Sensor Configuration guides for detailed steps.
Obtain the software and place it on the server
1. Download the software image (for example, sensorsw_1400_6015.jar) from the McAfee website to the TFTP server. This file is
compressed in a .JAR file.
NOTE: Ensure you download the correct Sensor image for the Sensor model and the software version that is installed on the
Manager.
McAfee product software, upgrades, maintenance releases, and documentation are available from the McAfee Downloads site at:
http://www.mcafee.com/us/downloads/downloads.aspx.
NOTE: You will need a valid Grant Number for access. KB56057 provides additional information about the McAfee Downloads site,
as well as alternate locations for some products.
2. Extract the files from the .JAR file. To do this, rename the file to a .zip extension if required and extract the contents.
3. Save the image file (sensorsw_xx00_xxxxx) to the /tftpboot directory.
NOTE: Refer to the TFTP server documentation for specific instructions on how to place the Sensor software on the TFTP server.
11/5/2014 12:51 PM
Manager address (and secondary interface IP address, if configured). This can be an IPv4 or IPv6 address
Certificates establishing trust between Sensor and Manager (shared key value)
Signatures
TFTP server IP address (IPv4 or IPv6 address)
DoS profile files (learned DoS behavior)
SSL Key
Alert Filter
ACL
Advanced Setting
resetconfig resets the following values to default:
Monitoring and Response port settings
Management port settings
Manager Install port value
Manager Alert port value
Manager Log port value
Resources
Tools
Service Requests
Beyond ServicePortal
Product Documentation
Support Documentation
Submit a Sample
My Company Entitlements
Careers Contact Us Website Feedback Privacy Legal Notices Legal & Contract Terms Site Map
2003-2014 McAfee, Inc.
11/5/2014 12:51 PM