Sunteți pe pagina 1din 10

I/O Expansion Board

CUBASE 40M
TM

User's Manual
MANUAL VERSION: 2011-11-24

CUBLOC module not included

Everything for Embedded Control

Comfile Technology Inc.


www.ComfileTech.com
Copyright 1996,2011 Comfile Technology

Comfile Technology
www.ComfileTech.com

CUBASE 64M Users Manual

1 of 10

Table of Contents
Introduction and Specifications....................................................................... 3
I/O Map ...................................................................................................... 4
Programming the CUBLOC Core Module ........................................................... 5
Display Devices............................................................................................ 6
Keypad Devices............................................................................................ 7
DIN Rail Mounting ........................................................................................ 8
Dimensions ............................................................................................... 10

Comfile Technology
www.ComfileTech.com

CUBASE 64M Users Manual

2 of 10

Introduction and Specifications


The CUBASE boards are the CUBLOCs I/O expansion boards for industrial field
applications requiring 12 or 24V DC inputs and outputs. The CUBLOC core modules
use 5V (TTL) level signals.
Model

CUBASE-40M

Processor

zCB405/TPC93

Program Memory (Flash)

200KB

Data Memory (RAM)

51KB(BASIC)+4KB(Ladder Logic)+55KB(Heap)

EEPROM

4KB

Serial Ports for


Communication

2 High-speed hardware independent serial ports


(Ch. 0 & 1: RS232C 12V)
(Ch. 2: RS232 TTL)
(Ch. 3: RS485)
Configurable Baud rates: 2400 to 230,400 bps

Digital Inputs

24 Opto-Isolated 7.5 to 24V

Digital Outputs

16 Opto-Isolated RELAY

Analog Inputs

4 Channel 10-bit ADCs


Configurable Input Voltage: 0 to 5V

Analog Outputs

3 Channels 16-bit PWMs


Configurable Modes: PWM only

Counters

2 Channel 16-bit High Speed Counters for 5V Pulse Input (100khz)

Timer

1 User Configurable Timer, Configurable Interval Units =


10msRequired Power: DC 12 to 28V

Power

- Current Consumption w/ ports unloaded: @ 24VDC: 30mA


- Isolated External 5 VDC Output: 5V/600mA

Insulation-Resistance

Input & Output & Input FG: DC500V, 100M, Cut-off current:
10mA, 1Min

Withstanding-Voltage

-Input & Output: AC500V 1Min


* Cut Off Current: 10mA, DC500V 100M
- Input FG: AC500V 1Min
* Cut Off Current: 10mA, DC500V 100M

Vibration

10~50Hz at 2G for 3 min. period, 30 min. along X,Y and Z axis

Impact

10G for 20mS, Once on each X,Y and Z axis

Keypad

Plug-N-Play Keypad Controller Support

CuNET, I2C Support

Yes

Din-Rail Mount

Yes

Relay Support

Included

LCD

Plug-N-Play LCD Support

Operating Temp.

-10C to 50C (10% to 95% RH Non-Condensing)

Storage Temp.

-10C to +70C (10% to 95% RH Non-Condensing)

Size

7.07" x 5.11" x 0.78" (179.8 x 129.8 x 20mm)

Comfile Technology
www.ComfileTech.com

CUBASE 64M Users Manual

3 of 10

I/O Map

Comfile Technology
www.ComfileTech.com

CUBASE 64M Users Manual

4 of 10

Programming the CUBLOC Core Module


To program the CUBLOC core module, you will need to use CUBLOC Studio.
CUBLOC Studio is free and can be downloaded from our website at
www.ComfileTech.com. With CUBLOC Studio installed on your PC, you can then
write programs using BASIC or Ladder Logic.
To download programs to the CUBLOC module, connect your PC to the CUBASEs
download port with an RS-232 cable. If your PC does not have an RS-232 port
(COM port), you can use a USB to RS-232 converter. USB to RS-232 converters
are available on our website.

USB to RS-232
Converter

For more detailed information about programming the CUBLOC, please refer to the
CUBLOC Users Manual. It too can be downloaded from our website.
Please refer to the I/O map section of this manual or the CUBASEs PCB for CUBLOC
I/O mappings.

Comfile Technology
www.ComfileTech.com

CUBASE 64M Users Manual

5 of 10

Display Devices
The CUBASEs CSG and CUNET ports are I2C ports that can be used to interface to
Comfile Technologys various display devices.
The CSG port is for interfacing to Comfile Technology's 7-segment display devices
(CSG-4M, CSG-4S). However, using the Set I2C command, CSG output can also
be sent to the CUNET ports.
The CUNET port is for interfacing to Comfile Technology's character LCD (CLCD)
devices (CLCD420-B, CLSD420-G, CLCD216-G) or any other CUNET/I2C device, all
of which are available at www.ComfileTech.com.

CLCD and CSG devices interface cable can be up to 3 meters in length. A 1-meter
cable is available on our website.

Comfile Technology
www.ComfileTech.com

CUBASE 64M Users Manual

6 of 10

Keypad Devices
The keypad port can be used to interface to Comfile Technologys keypad input
devices. Keypads, the keypad controller, and any necessary cables are all available
at www.ComfileTech.com.

5x4 Keypad

4x4 Keypad
4x4 Numeric
Keypad

Keypad
Controller

Comfile Technology
www.ComfileTech.com

CUBASE 64M Users Manual

7 of 10

DIN Rail Mounting


The CUBASE can be mounted to a DIN Rail using a Comfile Technologys DIN Rail
brackets. Simply attach the DIN Rail bracket to the back of the CUBASE and fasten
with two screws.

CUBASE with DIN Rail Bracket

CUBASE with DIN Rail Bracket Mounted (Rear View)

Comfile Technology
www.ComfileTech.com

CUBASE 64M Users Manual

8 of 10

Dimensions

Comfile Technology
www.ComfileTech.com

CUBASE 40M Users Manual

10 of 10

S-ar putea să vă placă și