Documente Academic
Documente Profesional
Documente Cultură
This is the preliminary user manual for DT-700. More information will be added in
the future once the new version is released. Please contact us if there is any
question while you are operating DT-700.
SAN JOSE TECHNOLOGY, INC.
11F., No.2, Sec. 4, Jhongyang Rd., Tucheng City, Taipei County 236, Taiwan
Tel: +886+886-2-22692269-4456
+886--2-2269
2269--4451
Fax: +886
E-mail: sanav@sanav.com
http://www.savav.com
1. Example for not installing firewall/ IP sharing device
Query IP address (for the version of Windows 2000 and XP)
Step1. Choose left corner Start Run
Step4. When the data streams come out, please see IP Address to check the IP.
Step4. When the data streams come out, please see IP Address to check the IP.
Step5. Open firewall/ IP sharing device manager then add new address of virtual
server IP and service port.
http://www.whatismyip.com/
Step 1.
Using following website apply a personal domain name. (www.dyndns.com )
Step2.
Get in this website then choose Create Account at the right top corner.
Step 3.
Enter users information.
Step 4.
Please put check marks on Terms of Services.
Step 5.
Go on to next step.
Step 6.
When following window appears, it indicates that the account is applied successfully
then you can check the confirmation e-mail at your e-mail box.
Step 7.
When confirmation e-mail is received, please connect to the web link shown at
middle of this mail to make the account opened.
Step 8.
When the account is opened successfully, you will see the following message.
Step 2.
Please choose the Service at the function bar after logging in then choose Dynamic
DNS as next step.
Step 3.
You will see a picture like below then Create Hosts
Step 4.
There will be some information on the screen. You just have to fill in Host Name
then choosing the desired Domain Name at the select box. For the IP address,
Step 5.
Congratulations!! You have already create a personal own Domain Name.
Step 1.
Using below connection downloading DynDNS to update IP program.
https://www.dyndns.com/support/clients/
Step 2.
Press the Download Now!
Step 3.
After the program is installed, run the program of DynDNS then click on Setting
Step 4.
This step will instruction you how to add new setting.
Step 5.
Enter the group name. It can be defined by your own group name.
Step 6.
1. In Username: please enter your account number applied from DynDNS.
2. Enter password and confirm the number you enter again then press ADD.
Step 7.
At this time, you will see a window coming out. Enter your domain name again then
press OK
The following step is related to the procedure of connection setting. If users adopt
Dail-up system with ADSL Line for internet connection, DynDNS will automatically
be activated as user turning on the computer every time to finish the connection
procedure and also update the status between
Protocol.
Step 8.
Setting connection by using Dial-up
Domain Name
Step 9.
Complete the connection procedure such as dialer information.etc.
Step 10.
After every step is complete, you will see a small picture at the right bottom corner.
You will see a picture like below when all steps are completed.
B.
GC-101 standard version (GPRS)
Setting GPRS IP address and port(fixed IP):
#username,0000,18,xx.xx.xx.xx:port number*
Setting the router to TCP: #username,0000,14,6 or 7*
C.
GC-101 1.67M Version
If the user is using dynamic IP, please do the following steps
Setting up the router to TCP: #username,0000,14,6 or 7*
(1) If the data is sent to TCP, please follow below steps.
#username,0000,22,0*
#username,0000,18,xx.xx.xx.xx:port number*
(2) If the data is send to URL, please follow below steps.
#username,0000,22,1*
#username,0000,4,DNS:port number*