Documente Academic
Documente Profesional
Documente Cultură
Pitch
Roll
Trim
Yaw
ability to float
deadweight
freeboard
midships strength
also called GM
the void portion of the ship below the waterline which is enclosed and watertight
affected by the number of transverse watertight bulkheads
the watertight portion of a vessel above the waterline
Question 6. The distance between the waterline of a vessel and the main deck is called _________________.:
draft
freeboard
buoyancy
camber
Question 7. What is the principal danger from the liquid in a half full tank onboard a vessel?:
Question 8. When cargo is shifted from the lower hold to the main deck the ___________.:
Question 9. The center of volume of the immersed portion of the hull is called the ________________________.:
center of buoyancy
center of flotation
center of gravity
tipping center
Question 10. The maximum mean draft to which a vessel may be safely loaded is called ______.:
mean draft
calculated draft
deep draft
load line draft
Question 1. The maximum mean draft to which a vessel may be safely loaded is called ______.:
mean draft
calculated draft
deep draft
load line draft
also called GM
the void portion of the ship below the waterline which is enclosed and watertight
affected by the number of transverse watertight bulkheads
the watertight portion of a vessel above the waterline
Question 3. Your vessel rolls slowly and sluggishly. This indicates that the vessel _____.:
Question 4. What is the principal danger from the liquid in a half full tank onboard a vessel?:
Question 5. When cargo is shifted from the lower hold to the main deck the ___________.:
Question 6. The amount of freeboard which a ship possesses has a tremendous effect on its ____________.:
initial stability
free surface
permeability
stability at large angles of inclination
Question 8. If a vessel takes a sudden, severe list or trim from an unknown cause, you should FIRST _________________.:
Metacentric height
Righting moment
Rolling period
Freeboard