Documente Academic
Documente Profesional
Documente Cultură
html
X-Ray Baggage Inspection system technical specification
POWER
Input Power:
170-270 VAC, 47-53hz, operating@ 230VAC, 50Hz, (10-amp Max). The electrical
system conforms to applicable sections of IEC for Electrical Safety and FCC Docket
20780 for Electromagnetic capability. Should provide the UPS if required. The
system should be ready for scanning in less than 2 minutes once the power is
resumed or the switch is activated again.
TUNNEL
Tunnel Opening:
As per user requirement. Eg.1000mm W 1000mm H.
CONVEYOR SYSTEM
Conveyor Belt Height:
Eg. 775MM (30.5).
Conveyor Speed:
0.2m per sec @50Hz.
Conveyor Capacity:
Eg. 150KG equally distributed (300lb).
Conveyor Belt:
Heavy Duty and Non-Skid BELT.
Conveyor Direction:
1.Bi-Directional Scanning (Normal).
2.Forward Only Scanning.
3.Automatic reverse of bag after scanning to the same position if required
X-RAY GENERATOR
Voltage:
160KV constant potential tube operating@140 KV.
Tube Current:
1mA max operatiing@0.8mA.
Filtering:
5mm Al.
Duty Cycle:
100%.
Cooling:
Sealed oil bath.
Beam Orientation:
Vertically upward
Beam Divergence:
80.
Adjustment of Tube Current &Voltage:
Manual & Through Keyboard.
The X-ray beam divergence should be such that the complete image of maximum
size of bag is displayed without corner cuts.
X-RAY SENSOR
X-Ray Sensor: Multienergy 1600 scintillation crystal detectors, Surface mounted
in folded array (L-shaped) configuration for100% screening.
operator can scroll through images of missed Fictional Threat Image (FTI)
projections.
Other Image Options:
High Penetration, Reverse Monochrome and Edge Enhancement.
All image options are available in real time at the touch of a button, without
stopping the conveyor belt.
DISPLAY
Video Display:
21 inch LED or LCD monitor
COMPUTER SPECIFICATIONS( Minimum)