Documente Academic
Documente Profesional
Documente Cultură
Owner
Client
Bidder role
Construction Location
:
:
:
:
Project Duration
Plant Location
Project Scope
Contract Value
Total Approx. Weight
:
:
:
:
:
Brief Description
:
Onshore Gas Processing Facility
With major equipments :
1. Pressure Vessels & Tanks.
2. ESD System.
3. Process Control System
4. Chemical Injection.
5. Gas-gas Exchanger.
6. Dew Point Refrigeration Package.
7. Pig Receiver.
8. TEG Contactor.
14. Diesel Generator.
9. Separators.
15. Gas Turbine Generator.
10. TEG Regeneration Package.
16. Fire Detection System
11. Dew Point Chiller Package.
17. Fire Water System,
12. Gas Engine Generator.
18. Concrete Control Room
13. Gas Metering Package.
19. Telecommunication System.
Detail of Work
:
1. Front End Engineering Design Evaluation, optimization and verification.
2. Fabrication Engineering.
3. Procurement Services for Civil Structure, Static and Rotating Mechanical Equipment, Steel Structure
Raw Material, Piping & Instrumentation, Control System, Electrical and Bulk Material
4. Pressure Vessel, Piping and Structure Fabrication.
5. Static Mechanical Equipment Fabrication and Installation.
6. Piping, Electrical & Instrumentation, Control & System Installation.
7. Civil works for Plant Construction.
8. Tie-in with PT Indonesia Power Gas Receiving Mater.
9. Tie-in with Offshore Pipeline for Oyong Phase 2 Contractors.
10. Start-Up and Commissioning.
Experience
Page : 1 of 10
DIV. PP
EXPERIENCE LIST
ONSHORE FABRICATION SERVICE FOR KE-32 PLATFORM
Owner
Client
Bidder role
Construction Location
Project Duration
:
:
:
:
:
Platform Location
Project Scope
:
:
Contract Value
:
Total Approx. Weight :
Brief Description
:
Monopod Platform.
With major equipments :
1. Pressure Vessels.
2. ESD System.
3. MPFM.
4. WHCP.
5. Scada System.
6. Close Drain System.
7. Chemical Injection.
8. N2 Bottle system.
9. Pedestal Crane Package, etc
Detail of Work
:
1. Engineering Evaluation and verification.
2. Fabrication Engineering.
3. Procurement Services for Steel Structure Raw Material, Piping & Instrumentation, Electrical
and Bulk Material.
4. Platform Steel Structure Fabrication.
5. Pile & Jacket Steel Structure Fabrication.
6. Mechanical Equipment Fabrication and Installation.
7. Piping, Electrical & Instrumentation Installation.
8. Pre-Commissioning, Load Out and Sea Fastening.
Experience
Page : 2 of 10
DIV. PP
EXPERIENCE LIST
WELLHEAD PLATFORM A UJUNG PANGKAH DEVELOPMENT PROJECT
Owner
Client
Bidder role
Construction Location
Project Duration
:
:
:
:
:
Platform Location
Project Scope
Contract Value
:
Total Approx. Weight :
AMERADA HESS
AMERADA HESS
PAL- RPE Consortium
PT PAL Indonesia Shop.
May 2005 - September
2006
Ujung Pangkah - Gresik
Madura Strain
Engineering, Procurement,
Construction
and
Installation (EPIC)
above 60 Million USD.
1300 Tonnes consist of
Platform, Pile & Jacket
Project Scope :
1. Engineering Evaluation and Verification.
2. Procurement Services for Equipment,
Steel, Super Duplex Material, Electrical,
Instrumentation and Bulk Material.
3. Fabrication Engineering.
4. Fabrication Pile & Jacket and Platform
Steel Structure.
5. Installation of Mechanical Equipment and
Piping, Electrical & Instrumentation
6. Fabrication and Installation Subsea Pipeline
18 (42 km).
7. Pre-Commissioning and Commissioning.
Brief Description
:
Four (4) Legs Platform, with major equipments :
1. Pressure Vessels.
2. ESD System.
3. PCS System.
4. F&G Detection System.
5. MPFM.
6. WHCP.
7. Scada System.
8. Close Drain System.
9. Chemical Injection.
10. N2 Bottle system.
11. Pedestal Crane Package.
12. Diesel Generator Package, etc
Experience
Page : 3 of 10
DIV. PP
EXPERIENCE LIST
ZELDA F PLATFORM FABRICATION FOR SES GAS PROJECT
Owner
Client
Bidder role
Construction Location
Project Duration
Platform Location
:
:
:
:
:
:
Project Scope
Contract Value
:
Total Approx. Weight :
Brief Description
:
Monopod Platform.
With major equipments :
1. Pressure Vessel.
2. Heat Exchanger.
3. ESD System.
4. MPFM.
5. WHCP.
6. Scada System.
7. Dew Point Control System.
8. Close Drain System.
9. Chemical Injection.
10. N2 Bottle system.
11. Pedestal Crane Package, etc
Detail of Work
:
1. Fabrication Engineering.
2. Procurement Services for Steel Structure Raw Material, Piping & Instrumentation, Electrical
and Bulk Material
3. Platform Steel Structure Fabrication.
4. Pile & Jacket Steel Structure Fabrication.
5. Mechanical Equipment Installation.
6. Piping & Instrumentation Installation.
7. Pre-commissioning, Load Out and Sea Fastening.
Experience
Page : 4 of 10
DIV. PP
EXPERIENCE LIST
TOTAL TUNU PHASE VII, VIII, XI / PKG1
Owner
Client
Equipment
: TOTAL INDONESIE
: TOTAL INDONESIE
: Turbo Compressor Module
Package.
Quantity
: 2 (two) Units
Bidder role
: Contractor
Activity Location
: GE Nuovo Pignone Florence &
Massacarrara - Italia
Project Duration
:
Phase XI Oct 2006 Febr. 2008.
Phase VIII Sept. 2001 - April 2003
Phase VII August 1998 - April 2000
Project Scope
:
Management, Engineering, Procurement,
Construction and Commissioning
Contract Value
Phase XI
Phase VIII
Phase VII
800 Tonnes
Brief Description
:
Compressor for Wellhead Gas Lift
With major equipments :
1. Gas Turbine.
2. Compressor.
3. Instrumentation.
4. Electric and Control System.
5. Steel Structure etc
Detail of Work
:
1. Basic and Detail Engineering.
2. Fabrication Engineering.
3. Procurement Services for Steel Structure Raw Material, Equipment, Piping &
Instrumentation, Electrical and Bulk Material
4. Steel Structure Fabrication.
5. Mechanical Equipment Installation.
6. Piping & Instrumentation Installation.
7. Electrical Installation.
8. Load Out and Transportation.
9. Package Installation.
10. Commissioning.
11. Project Management.
Equipment Destination :
Experience
Page : 5 of 10
DIV. PP
EXPERIENCE LIST
ARII CCO-341 PROJECT
Owner
Client
Equipment
: ARCO INDONESIA
: ARCO INDONESIA
: Compressoion Modules Train
C and D.
Quantity
: 2 (two) Units
Bidder Role
: Contractor
Activity Location
: PT PAL Indonesia Shop
Project Completion : 1997
Project Scope
: Engineering, Procurement, and
Construction.
Contract Value
: above 3 Million USD
Total Approx. Weight : 600 Tonnes
Brief Description
:
Compressor for Wellhead Gas Lift with dimension of 20 (L) x 75 (W) x 12 (H)
With equipment :
1. Gas Turbine.
2. Compressor.
3. Instrumentation.
4. Electric and Control System.
5. Steel Structure.
Detail of Work
:
1. Fabrication Engineering.
2. Procurement Services for Steel Structure Raw Material, Equipment, Piping &
Instrumentation, Electrical and Bulk Material
3. Steel Structure Fabrication.
4. Mechanical Equipment Installation.
5. Piping & Instrumentation Installation.
6. Electrical Installation.
7. Load Out and Transportation.
Equipment Destination
Experience
Page : 6 of 10
DIV. PP
Bontang - Indonesia
EXPERIENCE LIST
ARII CCO-300 PROJECT
Owner
Client
Equipment
Quantity
Bidder Role
Activity Location
Project Completion
Project Scope
Contract Value
Total Approx. Weight
Brief Description :
Detail of Work
1.
2.
3.
4.
5.
:
ARCO INDONESIA
:
ARCO INDONESIA
:
Monopod Platform and Pipespool.
:
ea 1 (one) Unit.
:
Contractor
:
PT PAL Indonesia Shop
:
1995
:
Procurement and Construction.
:
above 1 Million USD
:
N/A
Fabrication of KLC Monopod Platform and Pipespool
for MMC-A Enhancement
:
Fabrication Engineering
Procurement Services.
Machining
Construction.
Load Out and Transportation.
:
:
:
:
:
:
:
:
:
:
:
Detail of Work
:
1. Mobilization
2. Transportation.
3. Installation.
Experience
Page : 7 of 10
DIV. PP
ARCO INDONESIA
ARCO INDONESIA
Package.
1 (one) Set.
Contractor.
PT PAL Indonesia Shop
1995
Installation.
above 1 Million USD
N/A
KNA/BM Relocation
EXPERIENCE LIST
MODULAR PACKAGE OF RECOVERY PLUS FOR BLUESKY PROJECT
Owner
Client
Equipment
Quantity
Bidder role
Construction Location
Equipment Delivery
Project Scope
PERTAMINA UP VI BALONGAN
UOP
Glycol Regeneration Package.
1 (one) Unit
Subcontractor
PT PAL Indonesia Shop
August, 2004
Engineering, Procurement,
Construction & Pre-Commissioning
Contract Value
: above US$. 1,500,000
Total Approx. Weight : 100 Tonnes
Brief Description
:
The package consist of :
1. Steel Structure.
2. Heat Exchanger
3. Pressure Vessels.
4. Tanks.
5. Piping.
6. Electrical.
7. Instrumentation.
8. Bulk Materials.
Detail of Work
1.
2.
3.
4.
5.
6.
Destination
Experience
Page : 8 of 10
DIV. PP
:
Detail Engineering.
Fabrication Engineering.
Procurement Services.
Fabrication, Machining and Construction.
Installation.
Pre-Com, Load Out & Transportation.
: Balongan
:
:
:
:
:
:
:
:
EXPERIENCE LIST
GLYCOL REGENERATION PACKAGE PROJECT
Owner
Client
Equipment
Quantity
Bidder role
Construction Location
Project Duration
Project Scope
:
:
:
:
:
:
:
:
Contract Value
Brief Description
:
The package consist of :
1. Steel Structure.
2. Interchanger.
3. Pressure Vessels.
4. Tanks.
5. Burner.
6. Piping.
7. Instrumentation.
8. Bulk Materials.
Detail of Work
1.
2.
3.
4.
5.
Destination
Experience
Page : 9 of 10
DIV. PP
:
Detail Engineering.
Fabrication Engineering.
Procurement Services.
Fabrication, Machining and Construction.
Load Out and Transportation.
: South Lhoksukon, Aceh
MOBIL OIL
MOBIL OIL
Glycol Regeneration Package.
2 (two) Units.
Contractor
PT PAL Indonesia Shop.
October 1995 - July 1996
Engineering,
Procurement,
and Construction.
above 1,500,000 Million USD
Approx.
80 Tonnes
EXPERIENCE LIST
NILAM, SEMBERAH S-13 AND PAMAGUAN GAS COMPRESSION
Owner
Client
Equipment
Quantity
Bidder role
Construction Location
Project Duration
Project Scope
:
:
:
:
:
:
:
:
BRITISH PETROLEUM
VICO INDONESIA
Air Cooled Heat Exchanger
1 (One) Unit
Contractor
PT PAL Indonesia Shop.
July 1998 - December 1998
Engineering,
Procurement,
and Construction.
above USD 500,000.
95 Tonnes
Contract Value
:
Total Approx. Weight :
Brief Description
Detail of Work
1.
2.
3.
4.
5.
Destination
: N/A
:
Detail Engineering.
Fabrication Engineering
Procurement Services.
Fabrication, Machining and Construction.
Load Out.
: Franco On Barge
Experience
Page : 10 of 10
DIV. PP
: N/A
:
:
:
:
:
:
:
:
:
:
: