Documente Academic
Documente Profesional
Documente Cultură
Technical Catalogue
ISO 9001
Certified
escogear
FLEXIBLE GEAR COUPLINGS
Index
Introduction ................................................................................ 1
Why Escogear? ........................................................................... 2
Feature ......................................................................................... 3
Availabilities ............................................................................... 4
Other types available- Shaft connections ......................... 5
How to select the right Escogear size.............................6-7
The reasons why gear type couplings still have a leading market
position are directly related to the specic requirement of the
ALLOW:
Series NST
Torque: up to 2000 Nm
Bore: up to 65 mm
Series FST
Torque: up to 5040000 Nm
Bore: up to 1130 mm
escogear
ADVANTAGE
Why Escogear ?
High Torque and Misalignment capacity
Thanks to the patented escogear Multicrown prole (used on the C and F series), the
optimised coupling design and the standard use of 12.9 quality bolts, the Escogear
couplings offer the user a very high torque capacity.
This means that for a given torque a smaller coupling can be used which results in more
efcient machine design and performance. Furthermore, this high torque is available at
important angular misalignment.
Transparent coupling selection
The torque capacity of a gear type coupling strongly depends on the angular misalignment
to which it is subjected: the higher the misalignment, the lower the torque capacity. It
is clear that this relationship can and will cause problems in coupling selection because
misalignment during operation is almost impossible to predict. Escogear couplings of
the F and C...M type are equipped with Esco Multicrown tooth form. Thanks to this
quite unique design, the escogear has a torque capacity that is practically independent
of the angular misalignment. Therefore, coupling selection is easy and mistakes are
avoided : long coupling life is guaranteed.
High precision Gearing
Pitch error in the gearing of coupling can strongly affect, the load distribution between
the teeth can be strongly inuenced. In some cases, the maximum load applied on the
teeth can be twice the value of the load calculated. The consequence will be higher
surface and root stresses and coupling failure might be the result. Thanks to the high
precision manufacturing process and equipment on which all escogear couplings are
manufactured, and the sophisticated quality control, pitch error is minimized and the
best possible gear quality level and life time can be guaranteed.
Reduced backlash
One of the consequences of the Multicrown design is that the necessary backlash
between the teeth can be reduced to an absolute minimum. This will reduce the impact loads in start/stop and reversing torque applications. As a result, the teeth can
be designed with a larger section and the root stresses will be reduced. Thanks to this
feature the escogear couplings are ideal for use in presses, mills, punching machines,
portal cranes etc...
Perfect gear top centring
Gear type couplings require, in order to operate, a "clearance" between the top of each
hub tooth and the root of the sleeve teeth. Due to this clearance, the sleeve cannot
be perfectly centred on the hubs. This will create vibrations in applications where the
load constantly changes from no load to full load (e.g. portal cranes). These vibrations
will of course inuence the operation of the connected equipment. Thanks to special
design and machining techniques, Esco is able to pilot the top of each hub tooth into
the root of the sleeve teeth. By doing so, the sleeve will remain perfectly centred on
the hub and vibrations will be avoided. This specic feature is standard on all F and
C...M couplings.
Excellent protection of components
In order to guarantee optimum operation, all escogear couplings are protected with
special surface treatment or coating. All bolts are coated with Dacromet and the nuts
are zinc plated which gives an excellent corrosion resistance and makes disassembly
possible, even after numerous years of service life. Furthermore, all the steel components
are protected with a special coating to improve their corrosion resistance.
escogear
FLEXIBLE GEAR COUPLINGS
SERIES F
WITH ESCO MULTICROWN TOOTH FORM FOR LONG LIFE
LARGER BORE
CAPACITY
MAJOR DIAMETER
FIT FOR PERFECT
GEAR TOP CENTERING
LOWER STRESSES
The ESCO MULTICROWN tooth form is a curve with
constantly changing radii of curvature. The tooth contact
CONVENTIONAL
ESCO MULTICROWN
Variable pressure
Constant pressure
Variable
Variable
force
force
LESS BACKLASH
The ESCO MULTICROWN tooth design requires less backlash
for a given angle of misalignment than the conventional
crowning, thus reducing shocks in reversing application.
B400 E
escogear
SERIES F
AVAILABILITIES
FST
STANDARD
FSP
FFS
I B412
I B418
SHEAR PIN
FLOATING SHAFT
FSV
FSE
I B419
STANDARD VERTICAL
I B413
SPACER EXECUTION
FSLE
FMM
I B414
I B420
MILL-MOTOR
FDMM
FRR
I B415
I B421
RIGID - RIGID
DOUBLE MILL-MOTOR
FSH
FWD
IB416
WINCH DRUM
SLIDING HUB
FLE
I B422
FET
I B417
I B423
WITH ESCOTORQUE
LIMITED EN FLOAT
B401 E
escogear
SERIES F
FBD
DOUBLE SLIDING-HUB
WITH
BRAKE DISC
FFSV
FBP
VERTICAL
FLOATING-SHAFT
WITH
BRAKE-PULLEY
FIN
INSULATED
FCO
CUT-OUT
FFA
TO BE ADAPTED
ON FLYWHEEL
OR FLANGE
FSESP
SHEAR SPACER
Only a few special types of couplings are illustrated. Additional special types are available on request.
SHAFT CONNECTIONS
KEYWAY
EXTERNAL CLAMPING
INTERFERENCE FIT
INTERNAL CLAMPING
INTERFERENCE WITH
INTERMEDIATE CONICAL BUSHING
SPLINES
B402 E
escogear
SERIES F
torque in Nm =
9550 x P x Fu x F
n
P = power in kW; n = speed in rpm; Fu = service factor according to tabulation 1.
= 2 in case of use in potentionally explosive atmospheres
, European Directive 94/9/EC. In normal atmospheres, F
= 1.
F
The coupling selected per (A) must have an equal or greater torque capacity than the result of the formula (B). If not select a larger size coupling.
Check if application peak torque does not exceed tabulated peak torque Tp indicated planographs B410 to B423.
Check also max. allowable misalignment using the graph of tabulation 2.
C. Check if shaft/hub connection will transmit the torque. If necessary, select a longer hub.
D. Read carefully assembly and maintenance instructions IM/B400.
DRIVER MACHINE
TABULATION 1
Electric
motors
Turbines
0,8 to 1,25
Service factor FU
1 to 1,5
1,25 to 1,75
1,25
1,5
1,75
MODERATE
SHOCKS
Generators - Blowers: centrifugal vane, fans - Centrifugal pumps and compressors - Machine
tools: auxiliary drives - Conveyors: belt and chain, uniformly loaded, escalators - Can lling
machines and bottling machinery - Agitators: pure liquids.
Reciprocating
engine
Electric motors
frequent starts
Blowers: lobe - Pumps: gear and lobe types - Vane compressors - Machine tools: main drives
- Conveyors: belt and chain not uniformly fed bucket and screw - Elevators, cranes, tackles
and winches - Wire winding machines, reels, winders (paper industry) - Agitators liquids and
solids, liquids variable density.
1,25 to 1,5
1,5 to 1,75
1,75 to 2
HEAVY
SHOCKS
DRIVEN MACHINE
UNIFORM
APPLICATIONS
Hydraulic
motors
Gears
drivers
1,5 to 2
1,75 to 2,25
2 to 2,5
1) MAXIMUM MISALIGNMENT
FST 45 to 450N
TABULATION 2
GRAPH (T, n)
Forbidden Area
Special Design Requested
ax
m
Kw
K
w m
ax
0,4
Kw
0,3
FST
Size
Tn Ref
kNm
45
60
75
95
110
130
155
175
195
215
240
275
280
320
360N
400N
450N
1,3
2,8
5
10
16
22
32
45
62
84
115
174
244
290
370
450
560
Tn Ref
kNm
n Ref
min-1
0,65
1,4
2,5
5
8
11
16
22,5
31
42
57,5
87
122
145
185
225
280
13450
10400
8650
7100
6050
5150
4300
3950
3600
3450
3300
3050
3060
2800
2560
2290
2000
x=
0, 2
0,5
5
0,7
x=
ma
x=
ma
Kw
wm
a
A150 E (a)
escogear
2 MINIMUM MISALIGNMENT = 'Kwmin = 0,1
3 MISALIGNMENT CONTROL
1- Measure X (TIR) - 2- Measure Y-Z - 3- Verify the relationship for the misalignment control:
'Kwmin
X
Kx
Y-Z
Ky
0,75 x 'Kwmax
S
with S = Spacer lenght (mm)
30
(If no spacer: S = 0)
Ky = Ky0
Kx = Kx0 +
FST
Kx0
Ky0
45
60
75
95
110
130
155
175
195
215
240
275
280
320
360
400
450
1,92
2,06
2,76
3,25
3,80
4,47
5,03
5,72
6,35
7,47
8,24
9,18
10,82
11,34
12,32
13,37
14,35
2,34
3,04
3,71
4,54
5,28
6,22
7,55
8,20
9,18
9,98
11,04
12,98
13,76
15,08
16,76
18,50
20,74
4) EXAMPLES:
Calculation
T/Tn ref = 30%
'Kwmax = 0,4
n/n ref = 30%
FST 175: Kx = 5,72
Ky = 8,2
Measurement
X (TIR) = 0,9 mm
Control
Formule:
'Kwmin
d min.
d max.
Tn
Tp
1
2
3
3.1
3.2
MAXIMUM ANGULAR
MISALIGNMENT (degree)
INERTIA (kgm2)
WEIGHT (kg)
Y-Z
Ky
0,9
5,7
0,75 x 'Kwmax
0,4
8,2
0,75 x 0,4
ok
MAXIMUM OFFSET
(mm)
Kx
Calculation 0,1
Y-Z = 0,4 mm
3.3
3.4
4
4.1
4.2
4.3
4.4
5
5.1
5.2
5.3
5.4
6
6.1
7
8
9
10
* Max. torque, speed and misalignment tabulated values may not be cumulated
See IM/B400.
A150 E (b)
escogear
Equivalence chart based on torque ratings
Torque
Capacity
(Nm)
Escogear
FST
(2 x 0,75)
Flender
Zapex
(2 x 0,5)
175000
150000
125000
100000
Maina
GO-A
(2 x 0,5)
ZIN 7
ZIN 6
ZIN 5,5
GO-A 8
40000
FST 175
Kopex
Series H
7H
MT 205
MT 185
1060G
1055G
6H
1050G
5,5H
1045G
5H
ZIN 5
GO-A 7
30000
FST 155
1070G
MT 230
GO-A9
60000
FST 195
MT 260
GO-A 10
FST 240
FST 215
Falk
Lifelign
(2 x 0,5)
GO-A 11
FST 275
80000
Jaure
MT Series
(2 x 0,5)
MT 165
ZIN 4,5
1040G
GO-A 6
4,5H
MT 145
20000
FST 130
ZIN 4
15000
4H
GO-A 5
FST 110
MT 125
1035G
ZIN 3,5
3,5H
10000
GO-A 4
7500
FST 95
MT 100
1030G
3H
ZIN 3
GO-A 3
MT 90
5000
1025G
2,5H
ZIN 2,5
3500
FST 75
GO-A 2
MT 70
1020G
2500
2H
ZIN 2
2000
FST 60
GO-A 1
1015G
1500
MT 55
1250
1,5H
ZIN 1,5
1000
750
GO-A 0
FST 45
MT 42
ZIN 1
1010G
1H
500
Remark: When selecting based upon the above equivalent chart, please check bore capacity of escogear coupling
against the application requirements.
B404 E
escogear
Agma standard - Interchangeability Chart
ESCO
LOVEJOY
FALK
KOP-FLEX
AMERIDRIVES
AJAX
FST
G20, G10
6901
45
1010
101
60
1 1/2
1015
1 1/2
101 1/2
1,5
75
1020
102
95
2 1/2
1025
2 1/2
102 1/2
2,5
110
1030
103
130
3 1/2
1035
3 1/2
103 1/2
3,5
155
1040
104
175
4 1/2
1045
4 1/2
104 1/2
4,5
195
1050
105
215
5 1/2
1055
5 1/2
105 1/2
5,5
240
1060
106
275
1070
107
B405 E
escogear
FST 45
275
max. 1,5
A150
d nominal max.
d min.
* d max.
45
60
75
95
110
175
195
215
240
275
mm
45
60
75
95
110
130
155
175
195
215
240
275
mm
55
65
80
90
100
120
150
mm
50
64
78
98
112
132
158
175
198
217
244
275
1300
2800
5000
10000
16000
22000
32000
45000
62000
84000
2600
5600
10000
20000
32000
44000
64000
90000
tr/min
5000
4400
4000
3600
3350
omw/min
rpm
7000
6200
5650
5100
4700
min-1
degr
graad
2x0,75 2x0,75 2x0,75 2x0,75 2x0,75
degree
Grad
3100
2800
2700
2550
2450
2300
2150
4350
4000
3800
3600
3450
3300
3050
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
Tn
2
Nm
Tp
3.1
3.2
mm:
Type FST
130 155
115000 174000
mm:
0,35
0,4
0,5
0,6
0,7
0,9
1,1
1,2
1,4
1,5
1,7
kgm2
0,005
0,015
0,040
0,105
0,191
0,430
0,842
1,320
2,448
3,716
5,384
10,872
kg
4,1
8,0
14,6
26,1
38,8
59,2
89,4
117,5
167,1
222,4
275,0
413,6
dm3
0,05
0,07
0,13
0,21
0,36
0,52
0,80
0,98
1,51
2,02
2,43
3,29
mm
89
103
127
157
185
216
246
278
308
358
388
450
B
C
mm
mm
111
80
141
103,5
171
129,5
210
156
234
181
274
209
312
247
337
273
380
307
405
338
444
368
506
426
D
E
mm
mm
67
43
87
50
106
62
130
76
151
90
178
105
213
120
235
135
263
150
286
175
316
190
372
220
F
G
mm
mm
41
3
47
3
58,5
3
68,5
5
82
5
98
6
108,5
6
121
8
132
8
151,5
8
165
8
183,5
10
mm
mm
mm
mm
147
166
212
249
295
350
392
440
M 12
205
18
484
M 16
226
24
562
M 16
250
24
616
M 16
276
24
688
M 20
330
30
H
M
P
Q
10
* Consult us
B410 E
10
escogear
FST 280
1130
max. 1,5
Type FST
A150
d nominal max.
d min.
* d max.
280 320 360N 400N 450N 500 530 560 600 660 730 830 900 1000 1060 1130
mm
280
320
360
400
450
500
530
560
600
660
730
830
900
1000
1060
1130
mm
180
200
220
260
280
300
330
350
380
420
480
540
580
640
680
740
mm
310
340
375
420
470
500
530
560
600
660
730
830
900
1000
1060
1130
244000
290000
370000
450000
560000
630000
750000
860000
4390000
5040000
900000
Tn
Nm
tr/min
omw/min
rpm
min-1
1900
1800
1500
1400
1300
1150
1050
900
800
550
450
380
325
280
240
220
degr
graad
degree
Grad
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
mm:
2,1
2,3
2,5
2,7
2,8
3,2
3,4
3,6
3,7
4,4
4,8
5,2
5,4
kgm2
20,1
31
45
68
105
164
228
313
430
685
1161
1756
2580
3690
5090
6730
kg
591
760
932
1180
1532
1950
2330
2840
3370
4370
6110
7810
9730
11860
14220
16380
dm3
6,44
7,6
11
12
16
18
23
25
29
39
57
77
105
130
160
180
Tp
mm:
1120000 1260000 1500000 1720000 2040000 2580000 4040000 4900000 6140000 7220000 8780000 10080000
mm
570
597
623
673
713
759
809
859
905
945
1105
1205
1285
1365
1405
1425
B
C
D
mm
mm
mm
591
472
394
640
518
432
684
562
480
742
620
530
804
682
594
908
733
629
965
787
673
1029
841
724
1092
892
772
1200
997
870
1330
1130
965
1440
1240
1062
1545
1345
1156
1650
1450
1254
1750
1550
1346
1860
1660
1448
E
F
mm
mm
280
225
292
234
305
251
330
269
350
283
370
301
395
318
420
333
440
361
460
375
540
408
590
448
630
483
670
528
690
538
700
548
mm
10
13
13
13
13
19
19
19
25
25
25
25
25
25
25
25
mm
632
660
705
745
770
825
870
900
990
1020
1130
1210
1290
1400
1420
1440
mm
M 20
M 20
M 24
M 24
M 24
M 42
M 42
M 42
M 48
M 48
M 48
M 48
M 48
M 48
M 48
M 48
mm
336
377
420
480
544
568
600
642
680
765
860
950
1040
1130
1230
1300
mm
30
30
40
40
40
76
76
76
82
82
82
82
82
82
82
82
10
* Consult us
11
B411
escogear
FFS 45
320
max. 0,75
A150
d nominal max.
d min.
* d max.
d1
max.
*
*
280 320
45
60
75
95
mm
45
60
75
95
110
130
155
175
195
215
240
275
280
320
mm
55
65
80
90
100
120
150
180
200
mm
50
64
78
98
112
132
158
175
198
217
244
290
310
340
mm
55
75
95
110
130
155
180
200
230
250
280
330
360
400
mm
55
65
80
90
100
120
150
180
200
1300
2800
5000
10000
16000
22000
32000
45000
62000
84000
115000
174000
2600
5600
10000
20000
32000
44000
64000
0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75
1
min.
Tn
2
3.3
244000 290000
Nm
Tp
mm:
Type FFS
110 130 155 175 195 215 240 275
tr/min
omw/min
rpm
min-1
degr
graad
degree
Grad
kgm2
0,005
0,016
0,040
0,107
0,197
0,446
0,868
1,362
2,584
3,900
5,650
11,446
22,6
34,5
kg
4,1
8,2
14,6
26,5
39,6
60,3
90,3
119,0
174,3
231,1
285,2
429,3
648
822
dm3
0,023
0,037
0,065
0,104
0,181
0,261
0,398
0,488
0,756
1,009
1,215
1,643
3,2
3,8
mm
88
102
125
156
183
212,5
239,5
272
308
358
390
453
573
598,5
B
C
mm
mm
111
80
141
103,5
171
129,5
210
156
234
181
274
209
312
247
337
273
380
307
405
338
444
368
506
426
591
472
640
518
C1
D
E
mm
mm
mm
80
67
43
103,5
87
50
126
106
62
152
130
76
178
151
90
208
178
105
245
213
120
270
235
135
305
263
150
330
286
175
362
316
190
416
372
220
394
280
432
292
E1
F
mm
mm
40
41
47
47
58
58,5
74
68,5
87
82
101
98
113
108,5
129
121
150
132
175
151,5
190
165
220
183,5
280
225
292
234
F1
G
mm
mm
43,5
5
50,5
5
61,5
5
77,5
6
90,5
6
104,5
6,5
116,5
6,5
133
8
154
8
179
8
196
10
228
13
288
13
300
14,5
mm
117
133,5
167,5
202
238
279,5
312,5
353
396
460
504
572
606
637
mm
M 12
M 16
M 16
M 16
M 20
M 20
M 20
mm
mm
205
235
226
265
250
290
276
320
330
370
336
416
377
456
mm
18
24
24
24
30
30
30
P1
Q
10
* Consult us
B412 E
12
escogear
FSE 45
320
max. 1,5
A150
d nominal max.
d min.
* d max.
45
60
75
95
mm
45
60
75
95
110
130
155
175
mm
55
65
mm
50
64
78
98
112
132
1300
2800
5000
10000
16000
2600
5600
10000
20000
2x0,75
2x0,75
2x0,75
2x0,75
Tn
2
min.
mm:
min.
*
320
240
195
215
240
275
280
320
80
90
100
120
150
180
200
158
175
198
217
244
290
310
340
22000
32000
45000
62000
84000
115000
32000
44000
64000
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,49
2x0,76
2x1,01
2x1,21
2x1,64
2x3,2
2x3,8
174000 244000
290000
tr/min
omw/min
rpm
min-1
degr
graad
degree
Grad
4.1
kgm2
5.1
kg
dm3
mm
167
195
245
291
323
380
412
450
516
580
624
676
780
827
B
C
mm
mm
111
80
141
103,5
171
129,5
210
156
234
181
274
209
312
247
337
273
380
307
405
338
444
368
506
426
591
472
640
518
D
E
mm
mm
67
43
87
50
106
62
130
76
151
90
178
105
213
120
235
135
263
150
286
175
316
190
372
220
394
280
432
292
mm
mm
41
81
47
95
58,5
121
68,5
139
82
143
98
170
108,5
172
121
180
132
216
151,5
230
165
244
183,5
236
225
226
234
243
mm
mm
mm
63
76
91
110
131
155
175
195
M 12
205
214
M 16
226
246
M 16
250
266
M 16
276
306
M 20
330
305
M 20
336
320
M 20
377
mm
mm
60
80
90
110
110
130
130
18
130
24
160
24
160
24
160
30
160
30
176
30
190
mm
1,5
1,5
1,5
2,5
2,5
6,5
F
G
H
M
P
8
10
Q
min
*
275 280
215
Nm
Tp
3.3
Type FSE
110 130 155 175 195
S
G1
* Consult us
13
B413 E
escogear
FMM 45
320
max. 1,5
A150
d nominal max.
d min.
* d max.
45
60
75
95
mm
45
60
75
95
110
130
155
175
mm
55
65
mm
50
64
78
98
112
132
1300
2800
5000
10000
16000
2600
5600
10000
5000
4400
7000
Tn
2
3.2
mm:
*
275 280
*
320
215
240
195
215
240
275
280
320
80
90
100
120
150
180
200
158
175
198
217
244
290
310
340
22000
32000
45000
62000
84000
115000
20000
32000 44000
64000
4000
3600
3350
3100
2800
2700
2550
2450
2300
2150
1900
1800
6200
5650
5100
4700
4350
4000
3800
3600
3450
3300
3050
2950
2800
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75 2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
Nm
Tp
3.1
Type FMM
110 130 155 175 195
tr/min
omw/min
rpm
min-1
degr
graad
degree
Grad
mm:
0,35
0,4
0,5
0,6
0,7
0,9
1,1
1,2
1,4
1,5
1,7
2,1
kgm2
0,005
0,018
0,047
0,121
0,221
0,480
0,953
1,47
2,71
4,10
6,07
12,79
22,4
35,6
kg
5,1
11,0
19,3
33,4
49,3
70,7
107
137
193
256
322
506
689
920
dm3
0,05
0,07
0,13
0,21
0,36
0,52
0,80
0,98
1,51
2,02
2,43
3,29
6,44
7,6
A
B
mm
mm
126
111
167
141
195
171
227
210
260
234
281
274
316
312
343
337
378
380
433
405
478
444
580
506
700
591
775
640
C
D
mm
mm
80
67
103,5
87
129,5
106
156
130
181
151
209
178
247
213
273
235
307
263
338
286
368
316
426
372
472
394
518
432
E
E'
mm
mm
43
80
50
114
62
130
76
146
90
165
105
170
120
190
135
200
150
220
175
250
190
280
220
350
280
410
292
470
F
G
mm
mm
41
3
47
3
58,5
3
68,5
5
82
5
98
6
108,5
6
121
8
132
8
151,5
8
165
8
183,5
10
225
10
234
13
mm
157
200
239
276
318
351
392
440
484
562
616
704
765
805
mm
M 12
M 16
M 16
M 16
M 20
M 20
M 20
mm
205
226
250
276
330
336
377
mm
18
24
24
24
30
30
30
10
* Consult us
B414
14
escogear
FDMM 45
320
max. 1,5
A150
d nominal max.
d min.
* d max.
3.2
mm:
*
320
275
280
320
120
150
180
200
217
244
290
310
340
84000
115000
174000
244000
290000
60
75
95
mm
45
60
75
95
110
130
155
175
195
215
240
mm
55
65
80
90
100
mm
50
64
78
98
112
132
158
175
198
240 275
1300
2800
5000
10000
16000
22000
32000
45000
62000
2600
5600
10000
20000
32000 44000
64000
5000
4400
4000
3600
3350
3100
2800
2700
2550
2450
2300
2150
1900
1800
7000
6200
5650
5100
4700
4350
4000
3800
3600
3450
3300
3050
2950
2800
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75 2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
Nm
Tp
3.1
*
280
45
Tn
2
Type FDMM
110 130 155 175 195 215
tr/min
omw/min
rpm
min-1
degr
graad
degree
Grad
488000 580000
mm:
0,35
0,4
0,5
0,6
0,7
0,9
1,1
1,2
1,4
1,5
1,7
2,1
kgm2
0,006
0,021
0,053
0,136
0,251
0,530
1,06
1,62
2,96
4,49
6,76
14,70
24,7
40,2
kg
6,1
14,0
24,0
40,7
59,9
82,1
125
157
220
289
370
599
787
1080
dm3
0,05
0,07
0,13
0,21
0,36
0,52
0,80
0,98
1,51
2,02
2,43
3,29
6,44
7,6
A
B
mm
mm
163
111
231
141
263
171
297
210
335
234
346
274
386
312
408
337
448
380
508
405
568
444
710
506
830
591
953
640
C
D
mm
mm
80
67
103,5
87
129,5
106
156
130
181
151
209
178
247
213
273
235
307
263
338
286
368
316
426
372
472
394
518
432
E'
F
mm
mm
80
41
114
47
130
58,5
146
68,5
165
82
170
98
190
108,5
200
121
220
132
250
151,5
280
165
350
183,5
410
225
470
234
mm
mm
mm
mm
mm
3
163
3
231
3
263
5
297
5
335
6
350
6
392
8
440
M 12
205
18
8
484
M 16
226
24
8
562
M 16
250
24
8
616
M 16
276
24
10
710
M 20
330
30
10
895
M 20
336
30
13
935
M 20
377
30
G
H
M
P
Q
10
* Consult us
15
B415 E
escogear
FSH 60
215
A150
d nominal max.
d min.
* d max
d1
max.
60
75
95
110
175
195
215
mm
60
75
95
110
130
155
175
195
215
mm
55
65
80
90
100
mm
64
78
98
112
132
158
175
198
217
mm
55
65
80
90
100
mm
55
70
85
100
120
140
170
190
210
2800
5000
10000
16000
22000
32000
45000
62000
84000
5600
10000
20000
32000
44000
64000
90000
124000
168000
1
min.
Tn
2
Nm
Tp
3.3
4.1
max.
Type FSH
130
155
tr/min
omw/min
rpm
min-1
degr
graad
degree
Grad
4.1
kgm2
5.1
kg
6.1
dm3
6.1
mm
mm
193
141
210
171
231
210
250
234
276
274
291
312
319
337
344
380
381
405
C
C1
mm
mm
103,5
108
129,5
129,5
156
156
181
181
209
209
247
247
273
270
307
305
338
330
D
D1
mm
mm
87
78
106
98
130
115
151
140
178
165
213
195
235
230
263
260
286
280
A
B
max.
E
E1
6.1
mm
mm
50
135
62
140
76
145
90
150
105
160
120
160
135
170
150
180
175
190
max.
F
F1
6.1
mm
mm
47
138
58,5
139
68,5
144
82
157
98
159
108,5
162
121
168
132
168
151,5
179
min.
max.
G
H
I
min
10
mm
mm
mm
8
247
10
8
276
10
10
300
10
10
330
10
11
370
10
11
385
10
14
425
15
14
460
15
16
510
15
max.
L
M
P
P1
6.1
mm
mm
mm
278
290
311
340
361
371
394
M12
205
414
M 12
226
451
M 16
250
mm
200
225
245
mm
mm
18
75
18
70
24
70
max.
Q
S
85
80
80
90
85
80
* Consult us
B416 E
16
escogear
FLE 45
275
max.
NOUS CONSULTER
ONS RAADPLEGEN
REFER TO FACTORY
AUF ANFRAGE
A150
d nominal max.
d min.
* d max
45
60
75
95
110
mm
45
60
75
95
110
130
mm
mm
50
64
78
98
1300
2800
5000
Tn
175
195
215
240
275
155
175
195
215
240
275
55
65
80
90
100
120
150
112
132
158
175
198
217
244
290
10000
16000
22000
32000
45000
62000
84000
115000
174000
Nm
2600
5600
10000
20000
32000
44000
64000
90000
124000
168000
230000
348000
3.1
5000
4400
4000
3600
3350
3100
2800
2700
25550
2450
2300
2150
3.2
tr/min
omw/min
rpm
min-1
7000
6200
5650
5100
4700
4350
4000
3800
3600
3450
3300
3050
kgm2
0,005
0,015
0,040
0,105
0,191
0,430
0,842
1,32
2,45
3,72
5,38
10,87
kg
4,1
8,0
14,6
26,1
38,8
59,2
89,4
118
167
222
275
414
dm3
2x0,025
2x0,037
2x0,18
2x0,26
2x0,40
2x0,49
2x0,76
2x1,01
2x1,21
2x1,64
Tp
mm:
Type FLE
130 155
2x0,065 2x0,105
mm
89
103
127
157
185
216
246
278
308
358
388
450
B
C
mm
mm
117
80
141
103,5
171
129,5
210
156
234
181
274
209
312
247
337
273
380
307
405
338
444
368
506
426
D
E
mm
mm
67
43
87
50
106
62
130
76
151
90
178
105
213
120
235
135
263
150
286
175
316
190
372
220
F
G
mm
mm
41
3
47
3
58,5
3
68,5
5
82
5
98
6
108,5
6
121
8
132
8
151,5
8
165
8
183,5
10
mm
mm
mm
147
166
212
249
295
350
392
440
M 12
205
484
M 16
226
562
M 16
250
616
M 16
276
688
M 20
330
18
24
24
24
30
H
M
P
Q
10
mm
* Consult us
17
B417 E
escogear
FSP 45
275
max. 1,5
A150
d nominal max.
d min.
*d max.
45
60
75
95
mm
45
60
75
95
110
mm
mm
50
64
78
750
1800
1500
Tn
2
mm:
155
175
195
215
240
275
130
155
175
195
215
240
275
55
65
80
90
100
120
150
98
112
132
158
175
198
217
244
290
3500
7000
11000
15500
22000
31500
43500
55000
81000
122500
3600
7000
14000
22000
31000
44000
63000
87000
110000
162000
245000
4000
3600
3300
2950
2550
2150
2000
1800
1650
1450
1400
1350
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
Nm
Tp
3.1
Type FSP
110 130
tr/min
omw/min
rpm
min-1
degr
graad
degree
Grad
mm:
0,6
0,7
0,8
0,9
1,2
1,3
1,4
1,5
1,9
2,0
2,3
kgm2
0,019
0,055
0,098
0,272
0,448
1,01
1,75
2,77
4,61
6,82
9,68
18,4
kg
8,5
16,9
26,5
45,1
62,5
99,5
139
183
247
316
395
579
dm3
2x0,025
2x0,105
2x0,18
2x0,26
2x0,40
2x0,49
2x0,76
2x1,01
2x1,21
2x1,64
A
B
mm
mm
131
111
153
141
185
171
217
210
247
234
293
274
324
312
363
337
396
380
467
405
504
444
579
506
C
D
E
mm
mm
mm
80
67
43
103,5
87
50
129,5
106
62
156
130
76
181
151
90
209
178
105
247
213
120
273
235
135
307
263
150
338
286
175
368
316
190
426
372
220
mm
mm
41
45
47
53
58,5
61
68,5
65
82
67
98
83
108,5
84
121
93
132
96
151,5
117
165
124
183,5
139
mm
mm
189
33
216
44
270
44
309
48
357
48
427
60
470
60
525
64
572
64
671
78
732
78
817
96
J
M
mm
mm
155
194
228
267
300
358
384
428
M 12
470
M 16
524
M 16
560
M 16
656
M 20
P
Q
mm
mm
205
18
226
24
250
24
276
24
330
30
F
G
H
I
9
10
2x0,037 2x0,065
* Consult us
B418 E
18
escogear
FSV 45
275
max. 1,5
La cote G ne peut varier en cours de fonctionnement
Maat G mag niet gewijzigd worden bij werking
Distance G may not vary during operation
Das Ma "G" mu whrend des Betriebs konstant bleiben
A150
d nominal max.
d min.
* d max.
45
60
75
95
mm
45
60
75
95
110
mm
mm
50
64
78
1300
2800
2600
Tn
2
mm:
155
175
195
215
240
275
130
155
175
195
215
240
275
55
65
80
90
100
120
150
98
112
132
158
175
198
217
244
290
5000
10000
16000
22000
32000
45000
62000
84000
115000
174000
5600
10000
20000
32000
44000
64000
90000
124000
168000
230000
348000
5000
4400
4000
3600
3350
3100
2800
2700
2550
2450
2300
2150
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,5
2x0,5
2x0,5
Nm
Tp
3
Type FSV
110 130
tr/min
omw/min
rpm
min-1
degr
graad
degree
Grad
mm:
0,35
0,4
0,5
0,6
0,7
0,9
1,1
1,2
0,9
1,1
kgm2
0,005
0,015
0,040
0,105
0,191
0,430
0,842
1,32
2,45
3,72
5,38
10,9
kg
4,1
8,0
14,6
26,1
38,8
59,2
89,4
118
167
222
275
414
dm3
2x0,021
2x0,104
2x0,164
2x0,254
2x0,741
2x0,940
2x1,12
2x1,69
A
B
mm
mm
94
111
105
141
136,5
171
163
210
193
234
224
274
255
312
287
337
320
380
377
405
414
444
468
506
C
D
mm
mm
80
67
103,5
87
129,5
106
156
130
181
151
209
178
247
213
273
235
307
263
338
286
368
316
426
372
E
F
mm
mm
43
41
50
47
62
58,5
76
68,5
90
82
105
98
120
108,5
135
121
150
132
175
151,5
190
165
220
183,5
2x0,037 2x0,057
2x0,387 2x0,514
G
G1
9
9
mm
mm
8
1,5
5
1,5
12,5
1,5
11
2,5
13
2,5
14
3
15
3
17
4
20
4
27
4
34
4
28
5
G2
H
M
P
Q
9
10
mm
mm
mm
mm
mm
5,5
147
5,5
166
6
212
8,5
249
8,5
295
12
350
12
392
16
440
M 12
205
18
16
484
M 16
226
24
16
562
M 16
250
24
16
616
M 16
276
24
20
688
M 20
330
30
* Consult us
19
B419 E
escogear
FSLE 45
275
max.
NOUS CONSULTER
ONS RAADPLEGEN
REFER TO FACTORY
AUF ANFRAGE
A150
d nominal max.
d min.
* d max
45
60
75
95
110
mm
45
60
75
95
110
130
mm
mm
50
64
78
98
1300
2800
5000
2600
5600
10000
Tn
mm:
mini
195
215
240
275
155
175
195
215
240
275
55
65
80
90
100
120
150
112
132
158
175
198
217
244
290
10000
16000
22000
32000
45000
62000
84000
115000
174000
20000
32000
44000
64000
90000
124000
168000
230000
348000
2x0,18
2x0,26
2x0,40
2x0,49
2x0,76
2x1,01
2x1,21
2x1,64
Nm
3.3
tr/min
omw/min
rpm
min-1
4.1
kgm2
5.1
kg
dm3
2x0,025
2x0,037
mm
167
195
245
291
323
380
412
450
516
580
624
676
B
C
mm
mm
111
80
141
103,5
171
129,5
210
156
234
181
274
209
312
247
337
273
380
307
405
338
444
368
50 6
426
D
E
mm
mm
67
43
87
50
106
62
130
76
151
90
178
105
213
120
235
135
263
150
286
175
316
190
372
220
mm
mm
mm
41
81
1,5
47
95
1,5
58,5
121
1,5
68,5
139
2,5
82
143
2,5
98
170
3
108,5
172
3
121
180
4
132
216
4
151,5
230
4
165
244
4
183,5
236
5
mm
mm
63
76
91
110
131
155
175
195
M 12
214
M 16
246
M 16
266
M 16
306
M 20
205
18
130
226
24
10
250
24
160
276
24
160
330
30
160
F
G
G1
H
M
mini
175
2
Tp
mini
Type FSLE
130 155
P
Q
S
8
10
mm
mm
mm
60
80
2x0,065 2x0,105
90
110
110
130
130
* Consult us
B420 E
20
escogear
FRR 45
275
A150
d max.
d min.
45
60
75
95
110
mm
55
75
95
110
130
155
mm
195
215
240
275
180
200
230
250
280
330
55
65
80
90
100
120
150
1300
2800
5000
10000
16000
22000
32000
45000
62000
84000
115000
174000
Nm
2600
5600
10000
20000
32000
44000
64000
90000
124000
168000
230000
348000
3.3
tr/min
omw/min
rpm
min-1
6000
5500
5000
4400
4000
3500
3000
2700
2500
2200
2100
2000
kgm2
0,005
0,017
0,041
0,109
0,203
0,459
0,9
1,4
2,7
4,1
6,0
12,0
5.1
kg
4,4
8,4
14,6
26,9
40,4
62,2
92,1
123
185
244
308
461
A
B
C
mm
mm
mm
87
111
80
101
141
103,5
123
171
126
155
210
152
181
234
178
209
274
208
233
312
245
266
337
270
308
380
305
358
405
330
392
444
362
456
50 6
416
E
G
mm
mm
40
7
47
7
58
7
74
7
87
7
101
7
113
7
129
8
150
8
175
8
190
12
220
16
Tp
mm:
175
Tn
mini
Type FRR
130 155
mm
M 12
M 16
M 16
M 16
M 20
mm
235
265
290
320
370
mm
18
24
24
24
30
21
B421
escogear
FWD 150
420
G
E
F
30~
60~
60~
=
C h6
r
nxH
2xO
ESCO
150
170
220
250
280
300
320
380
420
SEB
SG130
SG140
SG185
SG200
SG240
SG270
SG315
SG355
SG400
mm
150
170
220
250
280
300
320
380
420
mm
65
80
120
150
180
190
200
220
260
37
62
130
160
310
385
500
660
800
74
124
260
320
620
770
1000
1320
1600
A150
max.
1
min.
Tn
2
kNm
Tp
RADIAL LOAD
kN
88
112
188
221
314
343
399
499
587
degr
graad
degree
Grad
0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75
0,75
10
10
10
mm:
mm:
B422
kgm2
0,78
1,69
4,7
6,4
13,6
18,1
25,2
42,2
62
kg
69
105
198
235
370
460
560
760
940
dm3
0,20
0,39
0,54
0,59
0,91
1,17
1,83
1,98
2,41
A
B
mm
mm
170
400
185
450
240
550
260
580
315
650
350
680
380
710
410
780
450
850
C
D
mm
mm
280
220
340
240
420
320
450
350
530
410
560
440
600
470
670
536
730
580
E
F
mm
mm
45
15
60
20
60
20
60
20
65
25
65
25
81
35
81
35
81
35
G
H
mm
mm
360
19
400
24
500
24
530
24
580
24
600
24
640
28
700
28
760
28
J
M
O
n
r
u
mm
mm
mm
mm
R"
360
279
M 16
10
2,5
1/8
400
339
M 20
10
2,5
1/4
500
419
M 20
10
2,5
1/4
530
449
M 20
14
2,5
1/4
600
529
M 20
14
2,5
1/4
630
559
M 20
26
4
1/4
660
599
M 20
26
4
1/4
730
669
M 20
26
4
1/4
800
729
M 20
26
4
1/4
22
escogear
FET 60
275
max. 1,5
A150
d nominal max.
d min.
* d max.
Tn
Type FET
110/2 130/3 155/3 175/4 195/4 215/5 240/5
60/1
75/1
95/2
mm
60
75
95
110
130
155
175
195
215
240
275
mm
55
65
80
90
100
120
150
mm
64
78
98
112
132
158
175
198
217
244
290
2800
5000
10000
16000
22000
32000
45000
62000
84000
115000
174000
1010
1010
1930
1930
7140
7140
11320
11320
34900
34900
57600
5600
8180
15600
15600
44000
57200
90000
90750
168000
230000
348000
3600
3300
2950
2550
2150
2000
1800
1650
1450
1400
1350
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2x0,75
2
min.
Nm
275/6
TR
max.
3
mm:
tr/min
omw/min
rpm
min-1
degr
graad
degree
Grad
mm:
0,7
0,8
1,1
1,4
1,5
1,7
1,8
2,2
2,3
2,7
kgm2
0,271
0,323
0,733
0,862
3,84
4,59
7,83
9,28
26,4
31,6
58,9
kg
33,1
41,6
67,9
82,5
184
222
290
345
587
681
1017
dm3
2x0,037
2x0,065
2x0,105
2x0,18
2x0,26
2x0,40
2x0,49
2x0,76
2x1,01
2x1,21
2x1,64
mm
161
193
228
258
325
356
391
424
512
549
630
B
C
mm
mm
141
103,5
171
129,5
210
156
234
181
274
209
312
247
337
273
380
307
405
338
444
368
506
426
D
E
mm
mm
87
50
106
62
130
76
151
90
178
105
213
120
235
135
263
150
286
175
316
190
372
220
F
G
mm
mm
47
61
58,5
69
68,5
76
82
78
98
115
108,5
116
121
121
132
124
151,5
162
165
169
183,5
190
mm
mm
mm
224
52
288
278
52
288
320
59
350
368
89
350
459
92
464
502
92
464
553
92
538
600
92
538
716
123
706
777
123
706
868
147
844
H
I
J
10
mm
M 12
M 16
M 16
M 16
M 20
mm
205
226
250
276
330
mm
18
24
24
24
30
mm
- 9,5
16
28,5
13
20,5
35
45
12,5
37
80,5
mm
230
230
292
292
390
390
464
464
582
582
720
* Consult us
23
B423 E
escogear
FST
Caractristiques principales Voornaamste karakteristieken Main features Viktiga frdelar
Charakteristische Hauptmerkmale Caracteristicas principales Caratteristiche principali
3 POSITIONS MOYEUX
3 NAVENPOSITIES
3 HUBS POSITIONS
3 EINBAUMGLICHKEITEN
3 NAVKOMBINATIONER
3 POSICIONES CUBO
3 POSIZIONI DEI MOZZI
Type FST
A105
d nominal max. mm
d min. mm
*d max. mm
A0
A1
mm
A2
E
mm
G0
G1
mm
G2
M
mm
mm
mm
mm
mm
45
60
75
95
110
130
155
175
195
215
240
275
*
280
*
*
*
*
320 360N 400N 450N
45
0
50
60
0
65
75
0
78
95
0
98
110
0
112
130
55
132
155
65
158
175
80
175
195
90
198
215
100
212
240
120
244
275
150
290
280
180
310
320
200
340
360
220
390
400
260
435
450
280
485
89
98
103
109
127
141
157
169
185
199
216
233
246
264
278
299
308
332
358
389
388
426
450
483
570
590
597
617
623
658
673
713
713
761
107
43
115
50
155
62
181
76
213
90
250
105
282
120
320
135
356
150
420
175
464
190
516
220
610
280
637
292
693
305
753
330
809
350
3
12
3
9
3
17
5
17
5
19
6
23
6
24
8
29
8
32
8
39
8
46
10
43
10
30
13
33
13
48
13
53
13
61
21
55
15
59
31
79
29
93
33
109
40
128
42
144
50
164
56
182
70
214
84
236
76
263
50
310
53
325
83
353
93
383
109
411
*Consult us
EXPOSED BOLTS
Exposed
Type
B
O
mm
mm
Exposed
Q
T
U
Metric
(E.M.)
V
W
Exposed
Inch
(E.I.)
U
V
W
Flange
Connection
B424 E
mm
mm
Qty.
mm
mm
Qty.
inch.
inch.
(1)
(1 1/2)
(2)
(2 1/2)
(3)
(3 1/2)
(4)
(4 1/2)
(5)
(5 1/2)
(6)
(7)
45
60
75
95
110
130
155
175
195
215
240
275
(8) *
280
*
*
*
*
320 360N 400N 450N
111
78
141
100
171
120
210
144
234
170
274
198
312
234
337
256
380
290
405
315
444
345
506
400
591
451
640
483
684
540
742
590
804
660
3,5
14
6
3,5
19
8
3,5
19
6
3,5
22
6
3,5
22
8
3,5
28,5
8
3,5
28,5
8
4
28,5
10
4
38
10
4
38
14
6
26
14
8
28,5
16
8
33
14
8
38
18
8
38
24
10
38
28
10
38
30
9
96
11
122
13
150
17
184
17
208
21
242
21
280
21
305
21
345
21
368
25
406
25
460
32
530
32
580
32
624
32
682
32
744
6
8
6
6
8
8
8
0,250 0,375 0,500 0,625 0,625 0,750 0,750
3,750 4,812 5,875 7,125 8,125 9,5
11
24
10
,0750
12
8
14
14
16
16
0,875 0,875 0,875 1,000 1,125
13,5 14,5 15,75 18,25 20,75
escogear
FLEXIBLE GEAR COUPLINGS
SERIE F
TABLE OF CONTENTS
1.
2.
3.
4.
5.
Introduction
Preparation
Warnings
Assembly
Inspection and maintenance
INSTALLATION
25
& MAINTENANCE
IM/B400 (Rev2)
2. PREPARATION
Ensure the conformity of the supplied equipment:
--- Verify coupling size and conformity (see catalogue or web site). --- Identify any damaged and/or missing parts.
--- Verify conformity of the coupling/machine interfaces.
Coupling original protection allows for storage indoors dry 18 months, indoors humid 12 months, outdoors covered: 9 months and outdoors open: 3 months. For longer
periods, it is customer responsibility to protect the parts properly. Instructions are a part of the supply of the coupling. Be sure valid and complete assembly, operation and
maintenance instructions are available. Make sure they are well understood. In case of doubt, refer to ESCO. Assembly, disassembly and maintenance must be performed
by qualied, trained and competent tters. Before starting with assembly, disassembly and maintenance, verify the availability of the tooling necessary
--- To manipulate the parts --- To assemble the interfaces
--- To align the coupling
--- To tighten the screws and nuts.
3. WARNINGS
Before removing the coupling guard and proceeding with any assembly, operation or maintenance operation of the coupling, make sure the complete system is completely
shut down and denitively disengaged from any possible source of rotation, such as, for example:
--- Electrical power supply. --- Any loss of braking effect.
Make sure everyone attending the equipment area will be properly informed (for example by means of warnings properly located) about the maintenance or assembly
, specic protective measures must be considered. They are described in an extra attachment (IM/A200-Ex) to the
situation. In case of use in explosive atmospheres
actual instructions with the couplings marked
.
4. ASSEMBLY
4.1 Coupling without end-cap
4.1.1 Ensure all parts are clean.
4.1.2 Apply a light coat of grease to the O-Rings A and insert O-Rings into grooves J of sleeves B.
4.1.3 Place sleeves B over shaft ends. Care should be taken not to damage O-Rings A.
4.1.4 Install hubs C on their respective shafts with the longest hub end towards shaft end or towards machine bearing depending on the type (see g. 1 and 3). If needed,
for keyway assembly, uniformly heat hubs C (max 120C) to install them easily on the shaft, in this case, avoid any contact between the hub C and O-Ring A. Hub
faces have to be ush with shaft end. In case of doubt, please consult us. Introduce setscrew on key with Loctite and tighten properly. In case of interference t, refer
to ESCO for proper instructions.
4.1.5 Install units to be connected in place and check the spacing G between hubs. See tabulation or approved drawing for correct hub spacing G, according to coupling
size. In case of doubt, please consult us.
4.1.6 Align the two shafts, check alignment using an indicator. For alignment precision: see tabulation 4.
4.1.7 Coat hub and sleeve gearings with grease (see tabulation 3) and slide sleeves B over hubs.
4.1.8 Insert gasket F and bolt sleeves together. Tighten bolts uniformly. See tabulation 2 for correct tightening torque (T1 Nm). Make sure that sleeves are freely sliding
over hubs by axially displacing it to a value equal to G (see tabulation 1).
4.1.9 For the types FST, FMM and FDMM, remove both lube plugs H of one sleeve B and add grease in sufcient amount to overow with lubricant holes in horizontal
position. For the types FFS, FSE, FSLE, FLE, FSP, FIN and FSV repeat this operation for the second sleeve. For quantity and quality of grease, see tabulation 3.
Re-install the 2 plugs H; see tabulation 2 for correct tightening torque (T3 Nm) and key size (s mm). For type FSV consult us.
4.2 Coupling with end-cap
4.2.1 Ensure all parts are clean.
4.2.2 Apply a light coat of grease to the O-Rings A and insert O-Rings into grooves J of end-cap X.
4.2.3 Place end-cap x and gasket xx over shaft ends. Care should be taken not to damage O-Rings A.
4.2.4 Install hubs C on their respective shafts with the longest hub end towards shaft end or towards machine bearing depending on the type (see g. 2 and 3). If needed,
for keyway assembly, uniformly heat hubs C (max 120C) to install them easily on the shaft. In this case, avoid any contact between the hub C and O-Ring A. Hub
faces have to be ush with shaft end. In case of doubt, please consult us. . Introduce setscrew on key with Loctite and tighten properly. In case of interference t,
refer to ESCO for proper instructions
4.2.5 Install units to be connected in place and check the spacing G between hubs. See above tabulation or approved drawing for correct hub spacing G, according to
coupling size. In case of doubt, please consult us.
4.2.6 Align the two shafts, check alignment using an indicator. For alignment precision: see tabulation 4.
4.2.7 Coat hub and sleeve gearings with grease (see tabulation 3) and slide sleeves B over hubs. Assemble end-caps K and gaskets L on sleeves B with screws M and
locking rings. Tighten screws uniformly. See tabulation 2 for correct tightening torque (T2 Nm) and key size (s mm).
4.2.8 Insert gasket F and bolt sleeves together. Tighten bolts uniformly. See tabulation 2 for correct tightening torque (T1 Nm) and socket size. Make sure that sleeves are
freely sliding above hubs by axially displacing it to a value equal to G.
4.2.9 For the types FST, FMM and FDMM, remove both lube plugs H of one sleeve B and add grease in sufcient amount to overow with lubricant holes in horizontal
position. For the types FFS, FSE, FSLE, FLE, FSP, FIN and FSV repeat this operation for the second sleeve. For quantity and quality of grease, see tabulation 3.
Re-install the 2 plugs H; see tabulation 2 for correct tightening torque (T3 Nm) and key size (s mm). For type FSV consult us.
IM/B400
26
Standard version
Fig 2
Fig 1
TABULATION 2
TABULATION 1
Type
45
60
75
95
110
130
155
175
195
215
240
275
280
320
360 N
400 N
450 N
FST
FMM
FDMM
FLE
G mm
3
3
3
5
5
6
6
8
8
8
8
10
10
13
13
13
13
FFS
G mm
FSP
Flange
FSH FSV
(min.)
FRR
FET
G mm G mm G mm G mm G mm G mm
2x 5
45
2x 5
53
2x 5
61
2x 6
65
2x 6
67
2 x 6,5 83
2 x 6,5 84
2x 8
93
2x 8
96
2x 8
117
2 x 10
124
2 x 13
139
2 x 13
2 x 14,5
8
8
10
10
11
11
14
14
16
8
5
12,5
11
13
14
15
17
20
27
34
28
7
7
7
7
7
7
7
8
8
8
12
16
61
69
76
78
115
116
121
124
162
169
190
45
60
75
95
110
130
155
175
195
215
240
275
280
320
360 N
400 N
450 N
7
8
11
11
12
12
14
14
14
16
33,5
66
112
277
277
537
537
537
537
537
795
795
1855
1855
1855
1855
1855
10
12
14
19
19
24
24
24
24
24
30
30
46
46
46
46
46
T2
Nm
Exagonal
socket
head screw
M
s
mm inch
15
3/8'' 1/4''
1/4''
49
1/2'' 3/8''
3/8''
118 5/8'' 1/2'' 4
4
3/8''
236 25/32'' 1/2'' 8
5
1/2''
236 25/32'' 1/2'' 8
5
1/2''
413 15/16'' 1/2'' 8
5
1/2''
413 15/16'' 1/2'' 8
5
1/2''
413 15/16'' 1/2'' 13
6
1/2''
569 17/16'' 1/2'' 13
6
1/2''
569 17/16'' 1/2'' 33
8
1/2''
569 17/16'' 1/2'' 33
8
3/4''
795 19/16'' 3/4'' 33
8
3/4''
65 10
1''
65 10
1''
65 10
1''
112 12
1''
112 12
1''
For FIN and FWD types, refer to factory
FFS
Plug
End Cap
FIN
3
4
4
4
4
5
5
6
6
6
8
8
8
10
10
T3
Nm
mm
7
10
10
10
10
10
10
10
10
29
29
29
29
29
29
29
29
4
5
5
5
5
5
5
5
5
8
8
8
8
8
8
8
8
FFS
FMM - FSH
FSP
Fig 3
Agip
Agip GR MV/EP 1
Caltex
Coupling Grease
Caltex
Castrol
Coupling Grease
Impervia MDX
Klber
Mobil
Klberplex GE 11-680
Mobilgrease XTC
Shell
Texaco
Albida GC1
Coupling Grease
Lical EPL 1
Kbler
Mobil
Klberplex GE 11-680
Mobilux EP0
Mobilgrease XTC
Q8
Shell
Rembrandt EP0
Alvania grease EP R-0 or EP 1
Albida GC
Texaco
Coupling Grease
Total
Specis EPG
FST
45
60
75
95
110
130
155
175
195
215
240
275
280
320
360
400
450
Kx0
Ky0
1,92
2,06
2,76
3,25
3,80
4,47
5,03
5,72
6,35
7,47
8,24
9,18
10,82
11,34
12,32
13,37
14,35
2,34
3,04
3,71
4,54
5,28
6,22
7,55
8,20
9,18
9,98
11,04
12,98
13,76
15,08
16,76
18,50
20,74
FSV
FDMM
FSE - FSLE
Type
FST
FMM
FDMM
dm3
0,047
45
0,074
60
0,131
75
0,207
95
0,362
110
0,522
130
0,796
155
0,976
175
1,513
195
2,017
215
2,429
240
3,286
275
6,440
280
7,600
320
360N 11,000
400N 12,000
450N 16,000
FFS
FSE
FSLE
dm3
2 x 0,025
2 x 0,037
2 x 0,065
2 x 0,105
2 x 0,180
2 x 0,260
2 x 0,400
2 x 0,490
2 x 0,760
2 x 1,010
2 x 1,210
2 x 1,640
2 x 3,220
2 x 3,800
2 x 5,500
2 x 6,000
2 x 8,000
FLE
FSP
FIN
dm3
2 x 0,025
2 x 0,032
2 x 0,062
2 x 0,117
2 x 0,170
2 x 0,230
2 x 0,450
2 x 0,610
2 x 0,820
2 x 1,200
2 x 1,300
2 x 1,900
2 x 3,200
2 x 3,800
2 x 5,500
2 x 6,000
2 x 8,000
FSV
FSH FWD
dm3
2 x 0,021
2 x 0,037
2 x 0,057
2 x 0,104
2 x 0,164
2 x 0,254
2 x 0,387
2 x 0,514
2 x 0,741
2 x 0,940
2 x 1,120
2 x 1,690
'Kwmin
X
Kx
Y-Z
Ky
0,75 x 'Kwmax
S
Kx = Kx0 +
with S = Spacer lenght (mm)
30
(If no spacer: S = 0)
Ky = Ky0
27
escogear
Attachment
: Specic Protective Measures Taken for
ESCOGEAR Couplings in case of use in explosive atmospheres.
0 Introduction - English
General assembly and maintenance instructions (called IM in this attachment), are established for standard ESCOGEAR couplings according to the following list:
IM/A200 for ESCOGEAR NST couplings - IM/A300 for ESCOGEAR CST couplings
IM/B300 for ESCOGEAR CST-M couplings - IM/B400 for ESCOGEAR FST couplings
In case of use in potentially explosive atmospheres , further to the general assembly and maintenance instructions (IM/...), the specic measures described in this attachment must
be taken.
1 Coupling Selection
The coupling must be selected according to the general assembly and maintenance instructions IM/... .
, the following specic rules must apply:
In explosive atmosphere
A Service Factor of 2 must be applied on the max torque values given in the charts in catalogue (see Selection chart A 150).
A Service Factor of 2 must be applied on the reference torque values given on the selection chart A150 for the calculation of max misalignment in operation.
Max misalignment (combination of angular and offset) may not exceed 0.5 per gear mesh.
2. Use of the coupling
The coupling is dedicated for use in potentially explosive atmospheres according to European Directive 94/9/EC (Atex 100A). Coupling is classied in equipment group II, equipment
category 2 and 3, intended for use in areas in which explosive atmospheres caused by gases, vapours, mists of air/dust mixtures are likely to occur. In function of the ambient temperature in the coupling proximity (65, 55, 40C), the temperature classes have been dened (T4, T5, T6). This is based on a temperature increase of the machine shafts (in regard
of the ambient temperature) that will not exceed 40C in operation.
The coupling is marked as follows: CE
II 2 G T4/T5/T6 D 105C
IM/A200-Ex Rev.3
28
24 HR TOLL-FREE EMERGENCY
BRANCH HELPLINE:
ISO 9001
Certified
BMG-PT22062011
www.bmgworld.net