Access the MS01 Maintenance screen Press the Windows Button on the keyboard then click Start Programs Fes Maintenance
Select the unit of measurement to
work with i.e millimeters or inches. Click 08 Products > 0808 Product Setup Units Select mm or inches from the drop down. Click OK. For this example we will select inches.
To access the full product table
and new Print Size Setup Select: 08 Products 0802 Print Size Setup
MS01 ver 3.0 print size setup
Issued July 2010 Ver 1.0
Copyright FUJIFILM TECHNICAL SERVICES 2010
2 of 4
Click the New button
The Print Size Setup Dialog Box
will appear in the lower half of the screen. Fill in the required fields: Name: Print size name e.g 6x9 Paper Width: the width of the paper roll e.g 6 inches Paper Length: Print size length e.g 9 inches Select the required Paper Surface from the drop down menu. Tick the Optional Software and FDIAB selection boxes. Ensure you have entered the correct values into all fields.
If the print size is required on
theSP3000/SP500 film scanners choose a scan channel and index and promo print sizes to complete the setup Click the Apply button to save the New Print Size Setup and update the Products list.
MS01 ver 3.0 print size setup
Issued July 2010 Ver 1.0
Copyright FUJIFILM TECHNICAL SERVICES 2010
3 of 4
You will need to restart
your system to access the new print size in MS01
Close out of the MS01
Maintenance Application Go back to MS01 View Orders Screen Click on Tools
Click the LOG OFF Button and type
the password: operator and click OK This will exit and re-boot MS01
You will need to repeat this
process to setup the full range of sizes and surfaces for this product. Eg: 6x9B Glossy Bordered 6x9M Lustre 6x9S Lustre and Bordered