Sunteți pe pagina 1din 4

This can be for file transfer or calendar (vCal) or business card

ASSIGNMENT 1 (vCard) exchange.


a. OBEX c. UWB
b. TCS Binary d. WATS
Name: _______________________________________ 21. ___ is not a protocol layer. It provides a standard transport
and communication interface w/c all Bluetooth devices are to
Subject and Section: __________________________ follow
a. HCI c. OBEX
Multiple Choice. Select the letter of the best answer. b. RF Home d. LEC
22. This specification is used for call control like in cordless
1. T-1 carrier can carry how many voice or data channels? telephony or Intercom profiles.
a. 48 c. 672 a. OBEX c. UWB
b. 24 d. 480 b. TCS Binary d. WATS
2. SONET can carry up to _____ channels on fiber optic cable. 23. ___ is another 2.4 GHz radio w/c has many similarities to
a. 672 c. 129,000 Bluetooth wireless technology. This can operated ad hoc
b. 480 d. 192,000 networks (data only) or be under a control of a connection point
3. What is the total speed of BRI-ISDN? coordinating the system and providing a gateway to the
a. 144 kbps c. 2.05 Mbps telephone network (voice and data).
b. 1.544 Mbps d. 64 kbps a. RF Home c. WiFi
4. ___ is also known as the Universal DSL b. RFI d. UMTS
a. HDSL c. ADSL 24. This technology is used to replace a wired LAN throughout a
b. DSL Lite d. xDSL building. The transmission capacity is high and so is the number
5. ___ was developed as a replacement for X.25 packet switching of simultaneous users.
a. ATM c. ISDN a. IEEE 802. 10 c. IEEE 802.12
b. Frame relay d. SONET b. IEEE 802.11 d. IEEE 802.13
6. What is the unlicensed frequency for Bluetooth technology? 25. ___ is a new radio technology still under development. Short
a. 1.44 GHz c. 3.4 GHz pulses are transmitted in a broad frequency range. The capacity
b. 2.4 GHz d. 4.4 GHz appears to be high while power consumption is expected to be
7. ___ is a Layer 1 transport service on fiber optic cabling? low.
a. ATM c. VPN a. OBEX c. UWB
b. SONET d. HDSL b. TCS Binary d. WATS
8. This protocol lays down the specification for the process and
procedure for a Bluetooth service to discover the functionalities
available in other Bluetooth devices.
a. L2CAP c. IrDA Protocol
b. SDP d. TCP/IP
9. Define it BNC
a. Bayonet Nut Connector c. British Naval Connector
b. Bureau of Network Co. d. both a and c
10. A type of network topology where nodes are connected in
sequential order.
a. bus c. ring
b. mesh d. star
11. ___ is a protocol that defines how Internet sites can be written
to fit on cellular devices screens and how devices access and
view these sites.
a. WAP c. Wi-Max
b. TCP/IP d. WiFi
12. ___ is the T-3 transmission rate of 44 Mbps with 673 channels
a. Fractional T-1 c. DS-3
b. Full T-1 d. DS-0
13. One of the 5 interest group of companies who develop
Bluetooth
a. Intel c. Toshiba
b. IBM d. All of the choices
14. 4-G service uses what type of multiplexing?
a. TDMA c. DWDM
b. GMSK d. OFDM
15. E-1 carrier can carry how many voice or data channels?
a. 30 c. 50
b. 40 d. 60
16. ___ is the term used when two or more stations attempting to
access a network at the same time.
a. collision c. contention
b. convention d. attenuation
17. ___ is the result of two or more messages sent on the same
line at the same time.
a. collision c. contention
b. convention d. attenuation
18. ___ is a fiber optic network protocol` based on dual ring
topology
a. Token Ring c. Network Security
b. Token Bus d. FDDI
19. What is the group name for IEEE 802.10?
a. Token Ring c. Network Security
b. Token Bus d. FDDI
20. This specification of Bluetooth technology states that the
format and process to transmit and receive data in object format.
b. IP Network d. Internet
ASSIGNMENT 2 19. A very popular system for defining and switching data packets on
computer networks.
ECE523N/1M a. Fast Packet c. X.25
b. Packet Switched WANs d. Frame Relay
20. What are the 3 major WAN topologies.
Name: _______________________________________ a. Frame Relay, Packet Switching, and ATM .
b. Leased Lines, Circuit Switching, and Packet Switching
c. DSL, ISDN, and ATM
Multiple Choice. Encircle the letter of the best answer. d. FDDI, SONET, and DSL
21. What is the other term for Voice over IP?
a. Internet telephony c. VoIP
1. ___ is a special rate services that limit to one direction only – either
b. Voice Gateway d. Wireless telephony
outward dialing or inward dialing.
22. This layer of the X.25 protocol converts the frames into packets
a. OBEX c. UWB
suitable for the network.
b. TCS Binary d. WATS
a. physical layer c. packet layer
2. ___ is a business organization w/c provides regulated telephone,
b. frame layer d. data link layer
telegraph, telex, and communication services.
23. This determines the function of the packet specifically, whether it
a. CCLEC c. Common Carrier
contains information or control signal.
b. LEC d. IXC
a. DTI c. MTI
3. ___ is a common carrier that provides local telephone services.
b. PTI d. BTS
a. CCLEC c. Common Carrier
24. This protocol is very commonly used to upload files and download
b. LEC d. IXC
them from servers on the network, is another application program. This
4. ___ is a common carrier that provides long distance services.
is often invoked transparently by Web browser or file downloads.
a. CCLEC c. Common Carrier
a. FTP c. SMTP
b. LEC d. IXC
b. TCP d. IP
5. The ___ appeared in the 1960s, and defined the basis for all
25. A system that allows users to access documents from widely
communications networks today.
separated source on the Internet using a common interface.
a. Packet Switching c. X.25
a. WWW c. SNMP
b. Packet Switched WANs d. Frame Relay
b. HTTP d. IGRP
6. What are the two modulation techniques used for ADSL?
a. TCP and IP c. DCT and CAP
b. FTP and SMTP d. CAP and DMT
7. In digital communication, what is the other term for binary zero?
a. Mark c. THIGH
b. Space d. TLOW
8. The loss of data occurs when two stations transmit at the same time
on a network.
a. collision c. contention
b. convention d. attenuation
9. A device that links two or more networks, passing only the
information from one network that is intended for another.
a. Bridge c. Hub
b. Switch d. Router
10. A large network extending over an area greater than that of a city.
a. LAN c. WAN
b. MAN d. GAN
11. The hub of an IBM token ring network
a. DMT c. WWW
b. MAU d. CMT
12. A network in w/c a physical connection from one end to the other of
a data path is maintained for the duration of a period of
communication; for example a PSTN.
a. Circuit Switched Network c. Frame Relay
b. Packet Switching d. Blue Tooth
13. A network node dedicated to interfacing between the network and
one or more printers.
a. e-mail server c. SQL server
b. domain name server d. print server
14. A network in w/c all the nodes can contribute network resources
and also run local programs.
a. peer-to-peer network c. point-to-multipoint network
b. point-to-point network d. split network
15. A data communications protocol created by Digital Equipment
Company for its mini computer products.
a. SNA c. DNA
b. LNA d. PNA
16. A device used to connect computers or computer networks running
incompatible operating system.
a. brouter c. modem
b. gateway d. hub
17. A world wide public network of networks that connects a very wide
variety of computers, applications and users.
a. Intranet c. VPN
b. IP Network d. Internet
18. A private network that uses the same TCP/IP protocol suite as the
Internet.
a. Intranet c. VPN
a. segment c. node
ASSIGNMENT 2 b. back bone d. architecture
18. The portion of light in a fiber that is redirected to that it travels in
ECE523N/2M the opposite direction of intended transmission.
a. cut-off wavelength c. cross connect
b. delay skew d. back scattering
Name: _______________________________________ 19. The data-carrying capacity of a transmission medium, usually
measured in hertz, which equals cycles per second.
a. Data rate c. Baud rate
Multiple Choice. Encircle the letter of the best answer. b. Bandwidth d. Bit rate
20. The frequency band occupied by a single or composite signal in its
original or unmodulated form.
1. What is the other term for IPv6?
a. Base band c. Wide band
a. 32 Bit IP Address c. TCS Binary
b. Broad band d. Narrow band
b. IPng d. TCP/IP
21. A not-for-profit professional association for those involved in the
2. It is one of the 3 satellite networks (Teledesic) whose consortium is
design and installation of cabling infrastructures / telecommunications
led by Bill Gates that are intended in the 3G category of public mobile
distribution systems.
network.
a. BICS I c. ANSI
a. Global Star c. Odyssey
b. IEEE d. EIA
b. Iridium d. all of the choices
22. A wireless technology that allows for signals to be transmitted over
3. UMTS offers broadband user data rates and operate on what bands
distances of <10 meters at a frequency of 2.4 GHz at speeds of less
of satellite frequencies?
than 1Mbps speed.
a. C and Ku band c. Ka and S band
a. WiFi c. Bluetooth
b. K and L band d. L and S band
b. WIMAX d. Infrared
4. What is the minimum core loss (dB) of a silica optic fiber that make
23. A transmission facility that has a bandwidth (capacity) capable of
possible practical light wave communications?
carrying numerous voice, video and data channels simultaneously.
a. 1.5 dB c. 0.5 dB
b. 3 dB d. 0.2 dB Each channel operates on a different frequency.
5. What is the diameter of a CD, CD-ROM, or DVD discs? a. Base band c. Wide band
a. 120 mm c. 100 mm b. Broad band d. Narrow band
b. 240 mm d. 300 mm 24. The material that surrounds the fiber cladding.
6. What is the complete name of a bus topology? a. Core c. Buffer
a. Common Bus Multipoint Topology b. Cladding d. Gela
b. Full Mesh Topology 25. A Local Area Network topology in which all workstations are
c. Common Bus Multiport Topology connected to a single cable. On this network, all workstations hear all
d. Common Oriented Bus Topology transmissions on the cable.
7. ___ is a special cable that consist of two parallel wires with a a. ring c. star
grounded shield around them. It is sometimes used for Gigabit b. bus d. mesh
Ethernet.
a. Coax Cable c. Twinax Coax Cable
b. Heliax Coax Cable d. Fiber Coax Cable
8. A term used to describe a computer operating system that allows
multiple programs to run simultaneously w/o interfering w/ each other.
a. multitasking c. multipringting
b. multiporting d. multiassigning
9. An Ethernet cable that has the transmit and receive connections
reversed at one end, for direct connection of two computers w/o a hub
a. break over cable c. cross patching cable
b. cross over cable d. cross coupling cable
10. These are the messages to be transmitted over a network.
a. signal c. packet
b. messages d. traffic
11. The principle standards development body in the USA. It is a non-
profit, non-government body supported by over 1000 trade
organizations, professional societies, and companies.
a. ANSI c. ISO
b. IEEE d. EIA
12. One of the test parameters used when testing Category 5E or
Category 6 UTP. This is the calculated difference in dB between
attenuation and crosstalk measurements.
a. DTR c. ACR
b. PPR d. SWR
13. ___ is a high speed cell relay , switching and transport technology
for either local or wide area environments.
a. ATM c. VPN
b. SONET d. HDSL
14. Loss of signal strength as a function of distance.
a. collision c. contention
b. convention d. attenuation
15. Most commonly used with reference to the 15-pin D type connector
and cables used to connect single and multiple channel equipment to
an Ethernet transceiver.
a. Attached Unit Interface c. Chromatic Dispersion
b. Closet d. Channel
16. A standard for determining the wire size.
a. DDT c. AWG
b. DMT d. AMD
17. The part of the network that carries the heaviest traffic.

S-ar putea să vă placă și