Documente Academic
Documente Profesional
Documente Cultură
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care centre.
Country
AUSTRIA
Web Site
www.samsung.com/at
BELGIUM
www.samsung.com/be
www.samsung.com/cz
CZECH REPUBLIC
DENMARK
70 70 19 70
www.samsung.com/dk
EIRE
www.samsung.com/ie
ESTONIA
800-7267
www.samsung.ee
FINLAND
030-6227 515
www.samsung.com/fi
FRANCE
www.samsung.com
GERMANY
www.samsung.com
HUNGARY
06-80-SAMSUNG(726-7864)
www.samsung.com
ITALIA
800-SAMSUNG(726-7864)
www.samsung.com
KAZAKHSTAN
8-10-800-500-55-500
www.samsung.kz
KYRGYZSTAN
00-800-500-55-500
LATVIA
800-7267
www.samsung.com/lv
LITHUANIA
8-800-77777
www.samsung.lt
LUXEMBURG
www.samsung.com/be
NETHERLANDS
www.samsung.com/nl
NORWAY
815-56 480
www.samsung.com/no
POLAND
www.samsung.com/pl
PORTUGAL
80820-SAMSUNG(726-7864)
www.samsung.com/pt
RUSSIA
8-800-555-55-55
www.samsung.ru
SLOVAKIA
0800-SAMSUNG(726-7864)
www.samsung.com/sk
SPAIN
902 10 11 30
www.samsung.com
SWEDEN
0771-400 200
www.samsung.com/se
Switzerland
0800-SAMSUNG(726-7864)
www.samsung.com/ch
TURKEY
444 77 11
www.samsung.com
TADJIKISTAN
8-10-800-500-55-500
U.K
www.samsung.com
UKRAINE
8-800-502-0000
www.samsung.com
UZBEKISTAN
8-10-800-500-55-500
www.samsung.uz
Plasma TV
user manual
www.samsung.com/global/register
Model
Serial No.
BN68-01743A-01
BN68-01743A.indb 1
2008-08-13 4:06:48
User Instructions
Screen Image retention
Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the
plasma monitor panel for more than 2 hours as it can cause screen image retention. This image
retention is also known as screen burn. To avoid such image retention, reduce the degree of
brightness and contrast of the screen when displaying a still image.
Height
The PDP can normally operate only under 2000m in height. It might abnormally function at a place
over 2000m in height so do not install and operate there.
Heat on the top of the PDP TV
The top side of the product may be hot after long period of use as heat dissipates from the panel
through the vent hole in the upper part of the product. This is normal and does not indicate any defect
or operation failure of the product. However, children should be prevented from touching the upper
part of the product.
The product is making a cracking noise.
A cracking noise may occur when the product contracts or expands due to a change of surrounding
environment such as temperature or humidity. This is normal and not a defect of the unit.
Cell Defects
The PDP uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which require
sophisticated technology to produce. However, there may be few bright or dark pixels on the screen.
These pixels will have no impact on the performance of the product.
Avoid operating the TV at temperatures below 5C(41F)
A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the PDP TV in 4:3 format for a long period of time may leave traces
of borders displayed on the left, right and centre of the screen caused by the
difference of light emission on the screen. Playing a DVD or a game console
may cause similar effect to the screen. Damages caused by the above effect are
not covered by the Warranty.
Afterimage on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may
produce partial afterimages. To prevent this effect, reduce the brightness and contrast when
displaying still images.
Warranty
- Warranty does not cover any damage caused by image retention.
- Burn-in is not covered by the warranty.
Installation
Be sure to contact an authorized service centre, when installing your set in a location with heavy
dust, high or low temperatures, high humidity, chemical substance and where it operates continually
such as the airport, the train station etc. Failure to do so may cause a serious damage to your set.
Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2)
digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive
DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with
the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be
available in some countries.
BN68-01743A.indb 2
2008-08-13 4:06:49
General Information
Function Description
User Instructions.............................................. 2
Checking Parts................................................. 4
Using the Stand-Base...................................... 4
Control Panel................................................... 5
Connection Panel............................................. 6
Viewing the Remote Control............................ 8
Time Features................................................ 24
Language / Blue Screen / Melody /
Light Effect / Energy Saving /
HDMI Black Level.......................................... 25
Using the Game Mode................................... 26
Wall- mount adjustment (Sold separately)..... 27
Viewing the Picture in Picture (PIP)............... 28
Screen Burn Protection.................................. 29
Operation
Switching Your Television On and Off.............. 9
Viewing the Menus......................................... 10
Plug & Play Feature....................................... 10
Viewing an External Signal Sources.............. 12
Editing Device Names.................................... 13
Channel Control
Storing Channels Automatically..................... 13
Storing Channels Manually............................ 14
Adding / Locking Channels............................ 15
Sorting the Stored Channels.......................... 16
Assigning Names to Channels....................... 16
Fine Tuning Channel Reception..................... 17
LNA (Low Noise Amplifier)............................. 17
Picture Control
Changing the Picture Standard...................... 18
Customizing the Picture Settings................... 18
Configuring Detailed Settings on the Picture... 19
Selecting the Picture Size.............................. 20
Selecting the Screen Mode............................ 20
Digital NR / Active Colour / DNIe /
Movie Plus..................................................... 21
Freezing the Current Picture.......................... 21
Sound Control
Sound Features............................................. 22
Selecting the Sound Mode (depending on
the model)...................................................... 23
PC Display
Setting up Your PC Software (Based on
Windows XP)................................................. 30
Input Mode (PC)............................................. 31
Setting the PC................................................ 32
Setting the Home Theatre PC........................ 33
About Anynet+
What is Anynet+?........................................... 46
Connecting Anynet+ Devices......................... 46
Setting Up Anynet+........................................ 47
Scanning and Switching between Anynet+
Devices.......................................................... 47
Recording....................................................... 48
Listening through a Receiver......................... 49
Check Points before Requesting Service...... 49
Appendix
Teletext Feature (depending on the model)... 50
Preparing before installing Wall- Mount
on the wall...................................................... 51
Wall Mount Kit Specifications (VESA)............ 52
Setting Up Your Remote Control.................... 53
How to assemble the Stand-Base
(depending on the model).............................. 58
Troubleshooting............................................. 58
Specifications................................................. 59
Important
Note
Symbols
Press
English
Contents
English -
BN68-01743A.indb 3
2008-08-13 4:06:49
Checking Parts
Owners Instructions
Remote Control/
AAA Batteries
Power Cord
Warranty Card/
Safety Guide Manual
(Not available in all
locations)
Ferrite Core
for S-Video
Cloth-Clean
Sold Separately
S-Video Cable
Antenna Cable
Component Cables
Audio Cables
Video Cable
PC Cable
Scart Cable
PC Audio Cable
HDMI Cable
HDMI/DVI Cable
-20 ~ 20
English -
BN68-01743A.indb 4
2008-08-13 4:06:50
Control Panel
Front (or Side) Panel
The product colour and shape may vary depending on the model.
1 SOURCE
Toggles between all the available input
sources (TV, Ext.1, Ext.2, AV, S-Video,
Component, PC, HDMI1, HDMI2 and DTV).
5
ENTER
In the on-screen menu, use this button as you
would use the ENTER button on the remote
control.
2 MENU
Press to see an on-screen menu of your TVs
features.
6
POWER
Press to turn the TV on and off.
3
+
Press to increase or decrease the volume. In
the on-screen menu, use the
+ buttons
as you would use the and buttons on
the remote control.
4
C/P.
Press to change channels. In the on-screen
menu, use the
C/P.
buttons as
you would use the and buttons on the
remote control.
Power Indicator
Blinks and turns off when the power is on and
lights up in stand-by mode.
Remote Control Sensor
Aim the remote control towards this spot on
the TV.
7 Speakers
English -
BN68-01743A.indb 5
2008-08-13 4:06:51
Connection Panel
Side Panel
1
2
or
The product colour and shape may vary depending on the model.
1 HDMI IN 3
Connect to the HDMI jack of a device with
HDMI output.
2 S-VIDEO or VIDEO / AUDIO L/R
Video (S-Video or Video) and audio inputs for
external devices, such as a camcorder or VCR.
3 Headphones jack
You can connect a set of headphones if you
wish to watch a television programme without
disturbing the other people in the room.
Prolonged use of headphones at a high
volume may damage your hearing.
Rear Panel
1
or
Cable Television
Network
8
or
you connect an audio or video system to your set, ensure that all elements are
Whenever
switched off.
When connecting an external device, match the colour of the connection terminal to the cable.
The product colour and shape may vary depending on the model.
Continued...
English -
BN68-01743A.indb 6
2008-08-13 4:06:53
1 POWER IN
Connect the supplied power cord.
2 Connecting external Audio Devices
Connect RCA audio signals from the TV to an
external source, such as Audio equipment.
3 EXT 1, EXT 2
Inputs or outputs for external devices, such as
VCR, DVD, video game device or video disc
players.
Input/Output Specification
Connector
EXT 1
EXT 2
Input
Output
Video Audio(L/R) RGB Video + Audio(L/R)
Only TV or DTV
output is available.
Output you can
choose.
4 COMPONENT IN
Audio (AUDIO L/R) and video (Y/PB/PR) inputs
for Component.
5 DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio Component.
6 SERVICE
Connector for service.
Connect the serial jack between the
electro-motion wall mount bracket and your
TV when you want to adjust the TV viewing
angle using your remote control.
7 PC IN / AUDIO
Connect to the video and audio output jack on
your PC.
8 COMMON INTERFACE Slot
Insert CI (Common Interface) card into the slot.
(refer to page 45)
When not inserting CI CARD in some
channels, Scramble Signal is displayed on
the screen.
The pairing information containing a
telephone number, CI CARD ID, Host ID,
and other information will be displayed in
about 2~3 minutes. If an error message
is displayed, please contact your service
provider.
When the channel information configuration
has finished, the message Updating
Completed is displayed, indicating that the
channel list is now updated.
Insert the CI-Card in the direction marked
on it.
9 HDMI IN 1, HDMI IN 2
Connect to the HDMI jack of a device with
HDMI output. These inputs can also be used
as a DVI connection with separate analog
audio inputs. An optional HDMI/DVI cable
will be necessary to make this connection.
When using the optional HDMI/DVI adapter,
the DVI analog audio inputs on your TV
allow you to receive left and right audio from
your DVI device. (Not compatible with PC)
When connecting this product via HDMI or
DVI to a Set Top Box, DVD Player or Games
Console etc, make sure that it has been
set to a compatible video output mode as
shown in the table below. Failure to observe
this may result in picture distortion, image
breakup or no picture.
Do not attempt to connect the HDMI/DVI
connector to a PC or Laptop Graphics Card.
(This will result in a blank screen being
displayed)
DVI IN (HDMI 2) AUDIO L/R
DVI audio outputs for external devices.
0 ANT IN
75 Coaxial connector for Aerial/Cable
Network.
Supported modes for HDMI and Component
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Component
English -
BN68-01743A.indb 7
2008-08-13 4:06:53
h Picture-In-Picture On/Off
i Picture effect selection
(Refer to page 18)
j Digital subtitle display
k Picture freeze
l If your remote control is not
functioning properly, take out
the batteries and press the
reset button for about 2~3
seconds.
Re-insert the batteries and
try using the remote control
again.
Teletext Functions
(Refer to page 50)
5 Exit from the teletext display
(depending on the model)
8 Teletext index
0 Fastext topic selection
! Teletext display/mix both
teletext information and the
normal broadcast
@ Teletext size
* Teletext mode selection
(LIST/FLOF)
( Teletext sub page
c P :Teletext next page
P :Teletext previous page
d Teletext cancel
f Teletext reveal
h Teletext hold
i Teletext store
Continued...
English -
BN68-01743A.indb 8
2008-08-13 4:06:54
English -
BN68-01743A.indb 9
2008-08-13 4:06:54
2
3
4
5
TV
Picture
Mode
: Dynamic
Contrast 100
Brightness 45
Sharpness 75
Colour
55
Tint
G 50
R 50
Colour Tone
: Cool1
Detailed Settings
More
Move
Enter
Exit
Enter
Return
Language
Move
Enter
Skip
Move
Home
Enter
Skip
Enter
Skip
Move
Belgium
France
Germany
Italy
Enter
Skip
Continued...
English - 10
BN68-01743A.indb 10
2008-08-13 4:06:55
7
8
12
Start
14
Skip
01
01
Adjust
Year
Hour
2007
12
Minute
:
Move
00
Enter
Services found: 0
Channel: -
0%
Start
Skip
Plug & Play
Scanning for digital services...
Services found: 6
Channel: 35
29%
Stop
13
40 MHz
0 %
Enter
11
Skip
--
10
Enter
Plug & Play
Auto Store
P 1
No
Move
Skip
Plug & Play
The Iberian Peninsula and Balears Islands
Canarian Islands
Move
Select
Skip
Continued...
English - 11
BN68-01743A.indb 11
2008-08-13 4:06:56
Day
Year
01
15
2007
Hour
Minute
12
00
Adjust
Move
Select
Skip
TV
Setup
Plug & Play
Language
: English
Time
Game Mode
: Off
Blue Screen
: Off
Melody
: Off
PC
Home Theatre PC : Off
Light Effect
: Off
More
Move
Enter
Return
TV
Input
Source List
: TV
Edit Name
Anynet+
Move
TV
Enter
Return
Source List
TV
Ext.1
Ext.2
AV
S-Video
Component
PC
HDMI1
HDMI2
HDMI3
DTV
Move
:
:
:
:
:
:
:
:
:
:
Enter
Return
English - 12
BN68-01743A.indb 12
2008-08-13 4:06:56
Input
TV
Source List
: TV
Edit Name
Anynet+
Return
Edit Name
Ext.1
Ext.2
AV
S-Video
Component
PC
HDMI1
HDMI2
HDMI3
:
: VCR
: DVD
: D-VHS
:
Cable STB
:
HD STB
:
Satellite STB
:
:
Move
Enter
TV
Return
Channel
Belgium
Country
: Belgium
Auto Store
France
Manual Store Germany
Channel Manager
Italy
Sort
Netherlands
Name
Spain
Fine Tune
LNA
: Off
Move
Enter
TV
Return
Channel
Country
: Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA
: Off
Enter
TV
Move
Move
Enter
Return
Auto Store
P 1
--
40 MHz
0 %
Start
Enter
Return
English - 13
BN68-01743A.indb 13
2008-08-13 4:06:57
cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish
to identify.
1 Press the MENU button to display the menu.
2 Press the or button to select Channel, then press the
ENTER/OK button.
3 Press the or button to select Manual Store, then press
the ENTER/OK button.
4 Select the required option by pressing the or button, then
press the ENTER/OK button.
5 When you are satisfied with your setting, press the ENTER/OK
button.
6 Press the EXIT button to exit.
TV
Channel
Country
: Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA
: Off
TV
Move
Enter
Return
Manual Store
Programme
Colour System
Sound System
Channel
Search
Store
: P 1
: Auto
: BG
: C
4
: 63 MHz
: ?
Move
Enter
Return
Programme (Programme number to be assigned to a channel)
Press the or button until you find the correct number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
Colour System: Auto/PAL/SECAM/NTSC4.43
Press the or button to select the required colour standard.
Sound System: BG/DK/I/L
Press the or button to select the required sound standard.
Channel (When you know the number of the channel to be stored)
Press the or button to select C (Air channel) or S (Cable channel).
Press the button, then press the or button to select the required number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
If there is abnormal sound or no sound, re-select the sound standard required.
Search (When you do not know the channel numbers)
Press the or button to start the search.
The tuner scans the frequency range until the first channel or the channel that you selected is
received on the screen.
Store (When you store the channel and associated programme number)
Set to OK by pressing the ENTER/OK button.
mode
Channel
P (Programme mode): When completing tuning, the broadcasting stations in your area have
been assigned to position numbers from P00 to P99. You can select a channel by entering the
position number in this mode.
C (Air channel mode): You can select a channel by entering the assigned number to each air
broadcasting station in this mode.
S (Cable channel mode): You can select a channel by entering the assigned number for each
cable channel in this mode.
English - 14
BN68-01743A.indb 14
2008-08-13 4:06:57
TV
channels.
1 Press the MENU button to display the menu.
2 Press the or button to select Channel, then press the
ENTER/OK button.
3 Press the or button to select Channel Manager, then
press the ENTER/OK button.
Adding channels
Using the Channel List, you can add channels.
4
5
Channel
Country
: Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA
: Off
Move
TV
Enter
Return
Channel Manager
Channel List
Child Lock
: Off
Locking channels
This feature allows you to prevent unauthorized users, such as
children, from watching unsuitable programmes by muting out video
and audio.
6
Press the or button to select Child Lock, then press the ENTER/
OK button.
7 Select On by pressing the or button, then press the ENTER/OK
button.
8 Press the or button to select Channel List, then press the
ENTER/OK button.
9 Move to the ( ) field by pressing the /// buttons, select a
channel to be locked, and press the ENTER/OK button.
If you press the ENTER/OK button again, the ( ) symbol next to
the channel disappears and the channel lock is canceled.
A blue screen is displayed when Child Lock is activated.
10 Press the EXIT button to exit.
Move
Enter
Return
Channel List
P 1 C4
1 / 10
Prog.
0
1
2
3
4
5
6
7
8
9
C -C4
C 24
C2
C5
C 80
C7
C 36
C 52
C 11
Add
Move
Page
Lock
Enter
Return
English - 15
BN68-01743A.indb 15
2008-08-13 4:06:58
TV
Channel
Country
: Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA
: Off
Move
TV
Enter
Return
Sort
Prog.
0
1
2
3
4
Move
TV
Ch. Name
C
C76
C5
C6
C7
Enter
Return
Channel
Country
: Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA
: Off
Move
TV
Enter
Return
Name
Prog.
0
1
2
3
4
Move
Ch.
C
C76
C5
C6
C7
Enter
Name
Return
English - 16
BN68-01743A.indb 16
2008-08-13 4:06:59
TV
Channel
Country
: Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA
: Off
Move
Enter
Return
Fine Tune
P 1
+3
Reset
Adjust
Save
Return
P 1*
Mono
Picture
Sound
SRS TS XT
:
: Dynamic
: Custom
: Off
Country
: Belgium
Auto Store
Sort
Fine Tune
ENTER/OK button.
3 Press the or button to select LNA, then press the ENTER/
Move
Enter
Return
OK button.
4 Select Off or On by pressing the or button, then press the
ENTER/OK button.
5 Press the EXIT button to exit.
Depending on areas, factory mode of LNA, will be set up as On or Off.
English - 17
BN68-01743A.indb 17
2008-08-13 4:06:59
TV
Picture
Mode
: Dynamic
Contrast 100
Brightness 45
Sharpness 75
Colour
55
Tint
G 50
R 50
Colour Tone
: Cool1
Detailed Settings
More
Move
TV
Enter
Return
Picture
Dynamic
Mode
: Dynamic
Standard
Contrast
100
Movie
Brightness
45
Sharpness 75
Colour
55
Tint
G 50
R 50
Colour Tone
: Cool1
Detailed Settings
More
Move
Enter
Return
TV
Picture
Mode
: Dynamic
Contrast 100
Brightness 45
Sharpness 75
Colour
55
Tint
G 50
R 50
Colour Tone
: Cool1
Detailed Settings
More
TV
Move
Enter
Return
Picture
Mode
: Dynamic
Contrast 100
Brightness 45
Sharpness 75
Colour
55
Tint
G 50
Cool2 R 50
Colour Tone
: Cool1
Cool1
Detailed Settings Normal
Warm1
More
Warm2
English - 18
BN68-01743A.indb 18
2008-08-13 4:07:00
TV
Picture
Mode
: Movie
Contrast 80
Brightness 65
Sharpness 35
Colour
35
Tint
G 50
R 50
Colour Tone
: Warm2
Detailed Settings
More
TV
Enter
Return
Detailed Settings
Black Adjust
: Off
Dynamic Contrast : Low
Gamma
: 0
White Balance
My Colour Control
Edge Enhancement : Off
Colour Space
: Wide
Move
Move
Enter
Return
English - 19
BN68-01743A.indb 19
2008-08-13 4:07:00
Picture
More
Size
Screen Mode
Digital NR
Active Colour
DNIe
Movie Plus
Reset
Move
: Auto Wide
: 16 : 9
: Auto
: On
: Off
: On
: OK
Enter
Return
Size
Auto Wide
16:9
Wide Zoom
Zoom
4:3
Just Scan
Move
Enter
Return
Picture
More
Size
Screen Mode
Digital NR
Active Colour
DNIe
Movie Plus
Reset
Move
: Auto Wide
: 16 : 9
: Off
: On
: Off
: On
: OK
Enter
Return
English - 20
BN68-01743A.indb 20
2008-08-13 4:07:00
TV
Picture
Press the MENU button to display the menu.
More
Press the ENTER/OK button to select Picture.
Size
: Auto Wide
Select the required option by pressing the or button, then
Screen Mode
: 16 : 9
Digital NR
: Auto
DNIe
: Off
Available options: Digital NR, Active Colour, DNIe, Movie
Movie Plus
: On
Plus
Reset
: OK
4 When you are satisfied with your setting, press the ENTER/OK
button.
Move
Enter
Return
5 Press the EXIT button to exit.
Digital NR: Off/Low/Medium/High/Auto
If the signal received by the television is weak, you can activate this feature to reduce any static and
ghosting that may appear on the screen.
Active Colour: Off/On
If you turn on this option, the colors of the sky and grass will be stronger and clearer for a more vivid
on-screen picture.
This function is not available in PC mode.
This function is not available in Movie and Standard mode.
DNIe: Off/Demo/On
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you
can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the
applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you
can view the difference in the visual quality.
DNIeTM (Digital Natural Image engine)
This feature brings you more detailed image with 3D noise reduction, detail enhancement,
contrast enhancement and white enhancement. New image compensation Algorithm gives
brighter, clearer, more detailed image to you. DNIeTM technology will fit every signal into your
eyes.
This function is not available in PC mode.
Movie Plus: Off/On
You can view more natural skin and clear text even in fast moving scenes.
Use this function when watching movies.
This function is not available in Wide Zoom and Zoom modes.
This function is not available when PIP is set to On.
This function is not available in PC mode.
English - 21
BN68-01743A.indb 21
2008-08-13 4:07:01
Sound Features
1
2
TV
Sound
Press the MENU button to display the menu.
Mode
: Custom
Press the or button to select Sound, then press the
Equalizer
ENTER/OK button.
SRS TS XT
: Off
Auto Volume
: Off
Sound Select
: Main
Mode
: Custom
watching a given broadcast.
Equalizer
SRS TS XT
: Off
Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz
Auto Volume
: Off
Internal Mute
: Off
English - 22
BN68-01743A.indb 22
2008-08-13 4:07:01
NICAM
Stereo
NICAM
Mono
(Normal)
NICAM Stereo
NICAM
stereo
Mono
(Normal)
NICAM DUAL-I/II
A2
Stereo
On-screen indication
NICAM
dual-1
Regular broadcast
(Standard audio)
Bilingual or DUAL-I/II
Dual I
Stereo
Stereo
NICAM
dual-2
Mono
(Normal)
If the receiving conditions deteriorate, listening will be easier if the mode is set to Mono.
If the stereo signal is weak and automatic switching occurs, switch to Mono.
When receiving a mono sound in the AV mode, connect to the AUDIO-L input connector on the
panel (front or side). If the mono sound comes out only from left speaker, press the DUAL I-II
button.
English - 23
BN68-01743A.indb 23
2008-08-13 4:07:01
Time Features
1
2
TV
Setup
Press the MENU button to display the menu.
ENTER/OK button.
Time
Game Mode
: Off
Melody
: Off
ENTER/OK button.
PC
Light
Effect
: Off
press the ENTER/OK button.
More
Available options: Clock Set, Sleep Timer, Timer 1, Timer 2,
Move
Enter
Return
Timer 3
TV
Time
5 When you are satisfied with your setting, press the ENTER/OK
button.
Clock Set
: 00 : 00
Sleep Timer
: Off
Power Off
Auto
When you set the timer On, the TV will eventually turn off, if no controls are operated for 3 hours
after the TV was turned on by timer. This function is only available in timer On mode and prevents
overheating, which may occur if a TV is on for too long time.
English - 24
BN68-01743A.indb 24
2008-08-13 4:07:02
TV
Setup
Press the MENU button to display the menu.
ENTER/OK button.
Time
Game Mode
: Off
Melody
: Off
press the ENTER/OK button.
PC
Available options: Language, Blue Screen, Melody, Light
Home Theatre PC : Off
Light Effect
: Off
Effect, Energy Saving, HDMI Black Level
More
4 When you are satisfied with your setting, press the ENTER/OK
Move
Enter
Return
button.
TV
Setup
5 Press the EXIT button to exit.
More
Language
Wall-Mount Adjustment
television for the first time, you must select the language which
PIP
English - 25
BN68-01743A.indb 25
2008-08-13 4:07:02
Language
: English
Game Mode
: Off
PC
ENTER/OK button.
Home Theatre PC : Off
English - 26
BN68-01743A.indb 26
2008-08-13 4:07:02
Auto Wall-Mount
TV
Setup
More
Wall-Mount Adjustment
Energy Saving
: Off
HDMI Black Level : Low
PIP
Screen Burn Protection
Move
Enter
Return
Wall-Mount Adjustment
Position1
(Red)
(Green) (Yellow)
Operations
Wall-mount
angle
adjustment
Reset
Remembering
the position and
moving to the
remembered
position
Remembers 3 positions
with the Red, Green and
Yellow buttons.
Moves to the remembered
position using these 3 color
buttons.
Position
Adjust
1
INFO
2
Center
3
Exit
English - 27
BN68-01743A.indb 27
2008-08-13 4:07:03
Return
Return
O
O
O
O
O
O
O
O
O
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
English - 28
BN68-01743A.indb 28
2008-08-13 4:07:03
PC
Horizontal Dot
Vertical Line
Time (minute)
1
1
2 min
TV/Ext/AV/S-Video/
Component/HDMI/DTV
2
2
2 min
TV
Setup
More
Wall-Mount Adjustment
Energy Saving
: Off
HDMI Black Level : Low
PIP
Screen Burn Protection
TV
Move
Enter
Return
Move
TV
Enter
Return
Pixel Shift
Pixel Shift
Horizontal Dot
Vertical Line
Time
Move
: On
: 2
: 2
: 2 min
Enter
Return
The Pixel Shift value may differ depending on the monitor size (inches) and mode.
All White: This function helps remove after images on the screen by changing the colour of pixels to
white. Use this function when there are remaining after images or symbols on the screen especially
when you displayed a still image on the screen for a long time.
Signal Pattern: This function helps remove after images on the screen by moving all the pixels on
the PDP according to a pattern. Use this function when there are remaining after images or symbols
on the screen especially when you displayed a still image on the screen for a long time.
Side Gray: When you watch TV with the screen ratio of 4:3, the screen is prevented from any
damage by adjusting the white balance on both extreme left and right sides.
Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.
Light: When you set the screen ratio to 4:3, it brightens the left and right sides.
To remove after images on the screen, use either All White or Signal Pattern function. Although
both of the two functions remove after images on the screen, Signal Pattern is more effective.
The after image removal function has to be executed for a long time (approximately 1 hour) to
effectively remove after images on the screen. If after image is not improved after the execution of the
function, repeat the function again.
Press any button on the remote control to cancel this feature.
English - 29
BN68-01743A.indb 29
2008-08-13 4:07:04
English - 30
BN68-01743A.indb 30
2008-08-13 4:07:04
Resolution
(Dot X Line)
640 x 350
720 x 400
640 x 480
IBM PC / AT
Compatible
800 x 600
1024 x 768
Vertical
frequency
(Hz)
70.086
70.087
59.940
70.000
72.809
75.000
60.317
70.000
72.188
75.000
60.004
70.069
72.000
75.029
Horizontal
frequency
(kHz)
31.469
31.469
31.469
35.000
37.861
37.500
37.879
43.750
48.077
46.875
48.363
56.476
57.672
60.023
Vertical
polarity
Horizontal
polarity
PS42A417
N
P
N
N/P
N
N
P
N/P
P
P
N
N
N/P
P
P
N
N
N/P
N
N
P
N/P
P
P
N
N
N/P
P
English - 31
BN68-01743A.indb 31
2008-08-13 4:07:04
Setting the PC
Preset to the PC mode by pressing the SOURCE button.
1
2
TV
Setup
Plug & Play
Language
: English
Time
Game Mode
: Off
Blue Screen
: Off
Melody
: Off
PC
Home Theatre PC : Off
Light Effect
: Off
More
Move
Enter
TV
Return
PC
Image Lock
Position
Auto Adjustment
Image Reset
Move
TV
Enter
Return
Image Lock
Coarse
Fine
Move
TV
50
31
Enter
Return
Position
Move
Enter
Return
English - 32
BN68-01743A.indb 32
2008-08-13 4:07:04
Return
English - 33
BN68-01743A.indb 33
2008-08-13 4:07:04
Guide
Now & Next Guide
Full Guide
Scheduled List
Default Guide
Move
: Full Guide
Enter
Exit
Channel
Auto Store
Manual Store
Channel List
Move
Enter
Exit
Setup
Menu Transparency : Medium
Parental Lock
Subtitle : On
Move
Enter
Exit
Continued...
English - 34
BN68-01743A.indb 34
2008-08-13 4:07:05
Language
Audio Language
Subtitle Language
Teletext Language
Preference
Language
Audio Language
Subtitle Language
Teletext Language
Preference
Move
Enter
Exit
The sub-items of the CI Menu may vary depending on the CAM model. (refer to page 45)
All Channels
14:20 - 14:33
Contains video with AFD O; coded frame
is 16:9
Exit
English - 35
BN68-01743A.indb 35
2008-08-13 4:07:06
Channel
Auto Store
Manual Store
Channel List
Move
Enter
Exit
Channel
Auto Store
Manual Store
Channel List
Move
Enter
Return
Auto Store
0%
Services found: 0
Channel: -
Start
Return
Channel
1.2 Manual Store
You can specify the channel for a fast channel search.
Auto Store
Channel
Manual Store
Press the , or numeric buttons (0~9) to select a
Edit Favourite Channels
channel.
Channel List
Continued...
English - 36
BN68-01743A.indb 36
2008-08-13 4:07:06
Channel
1.3 Edit Favourite Channels
You can edit your favourite channels using the colour buttons.
Auto Store
ENTER/OK button.
Edit Favourite Channels
2
Five
Select None: Deselect all selected channels.
3
BBC THREE
Preview: Displays (a) currently selected
4
abc1
5
QVC
channel(s).
2
BBC THREE
section.
To add all channels to the favourites channel list, press
the red button.
Add
Renumber
Preview
Delete
To remove all channels, press the green button.
Move
Return
Preview: Displays (a) currently selected channel(s).
Press the CH LIST button to display the favourite
channel list.
Renumber
In the Edit Favourite Channels menu, press the or
button to select the required channel.
Press the green button.
The space for entering the number is a blank.
Enter the new channel number. Press ENTER/OK button to store or RETURN button to
cancel.
Press the button to delete an entered digit.
If you enter a number already assigned to another channel, the number is assigned to the
selected channel and the previous number assigned to the selected channel is assigned
to the other channel.
That is, the two numbers are exchanged.
The favorite channels are automatically sorted in ascending order of channel numbers.
Preview
In the Edit Favourite Channels menu, press the or button to select the channel to be
previewed.
Press the yellow button. Displays currently selected channel.
Delete
In the Edit Favourite Channels menu, press the or button to select the channel to be
deleted from the favourite channels list.
Press the blue button. The selected channel and number will be deleted.
To add a deleted channel back in to the favourite channel list, see Add.
Continued...
English - 37
BN68-01743A.indb 37
2008-08-13 4:07:07
Channel List
1.4 Channel List
A
ll Channels-All
You can display a list of all channels or your favourite channels. BBC TWO
1. Test Card M...
806 arte
40. BBC NEWS24
Press the or button to select Channel List, then
51. BBCi
2. BBC TWO
800 ARD-MHP-DATA
3. Vida003b
press the ENTER/OK button.
801 ARD-OnLine-K..
4. Vida004b
802 BBC ONE
5. Vida005b
It can be displayed simply by pressing the CH LIST
803 MDR FERNSE..
6. Vida006b
804 NDR FERNSEH..
7. BBC THREE
button.
30. CBBC Channel
805 Vida002b
Press the yellow button to toggle between your favourite
Previous Page
Next Page
Favourites
TV
channels and all channels.
Move
Watch
Exit
Your favourite channels are only displayed if they were
previously set in the Edit Favourite Channels menu (refer
to page 37).
Press the red or green button to display the previous or
next channel list page.
Press the or button to select a channel to be tuned,
then press the ENTER/OK button.
The channel number, name and an icon are displayed in the top left corner while changing
the channel. The channel number and name are displayed if the channel is one of the all
channels, and a icon if the channel is one of the favourite channels.
Press the blue or CH LIST button to exit from the channel list.
Watch
Full Guide
Next
Favourites
Exit
Continued...
English - 38
BN68-01743A.indb 38
2008-08-13 4:07:07
To view programme information, press the /// button to select a programme of your
choice, then press the INFO button.
Information such as the channel number, programme title and running time, status bar,
and brief summary of the highlighted programme will be displayed in the top right corner
of the screen. If there is a lengthy summary, will be displayed. Press the INFO button
for the full summary text.
Six channels are displayed. To scroll between channels, move to a channel using the
or button. To display page by page, use the P or
button.
2.2 Scheduled List
Scheduled List
If you make a scheduled viewing list of programs you may
Thursday 22 Apr
15:30 ~ 18:00 Once
2 BBC TWO
Animal Park
like to see, the channel will be automatically switched to the
Thursday 22 Apr 20:00 ~ 21:00 Once
scheduled program at the scheduled time even if you are
2 BBC TWO
The Hairy Bikers
watching another program.
Press the red button to add a new programme. The
menu for adding a programme is displayed with Channel
Add Programme
Edit
Delete
selected.
Move
Return
Press the / and ENTER/OK buttons to set the required
channel, time, date, and frequency. When you are satisfied
Scheduled List
with your settings, save the adjusted schedule by pressing
Channel
810 Super RTL
the red button.
Time
10 : 15 to - - : - If you want to edit the scheduled programme, select a
programme by pressing the or button, then press the
Thu 03 Mar 2005
Date
green button. If necessary, select the programme to be
Frequency
deleted by pressing the or button, then press the blue
Save
Cancel
button.
Adjust
Move
Return
When watching analog TV, the reserved DTV channel
cannot be changed. The channel is only changed
automatically to the reserved channel when you are
watching DTV.
Scheduling programme only functions with the
television already turned on, and not from standby
mode. For details about switching the television on and
off automatically, refer to page 9.
Guide
Now & Next Guide
Full Guide
Scheduled List
Default Guide
Move
: Full Guide
Enter
Return
Guide
Now & Next Guide
Full Guide
Scheduled List
Default Guide
Move
Now/Next
: Full
Guide
Full Guide
Enter
Return
Continued...
English - 39
BN68-01743A.indb 39
2008-08-13 4:07:08
Guide
Now & Next Guide
Full Guide
Default Guide
Move
: Full Guide
Enter
Return
Now
Scheduled List
Watch
Full Guide
Next
Favourites
Exit
Watch
Full Guide
3. Language
This menu consists of 4 sub-menus:
Audio Language, Subtitle Language, Teletext Language,
and Preference.
No
Favourites
Exit
Language
Audio Language
Subtitle Language
Teletext Language
Preference
Move
Enter
Return
Continued...
English - 40
BN68-01743A.indb 40
2008-08-13 4:07:09
Language
3.2 Preference
This menu consists of 6 sub-menus:
Audio Language
Primary Audio Language, Secondary Audio Language,
Subtitle Language
Primary Subtitle Language, Secondary Subtitle Language,
Teletext Language
Primary Teletext Language, and Secondary Teletext
Preference
Language.
Using this feature, users can select one of the languages
(English, German, Italian, Swedish, French, Welsh, Gaelic,
Move
Enter
Return
Irish, Danish, Finnish, Norwegian, Spanish, Czech, and Greek).
Preference
The language selected here is the default when the user selects
a channel.
Primary Audio Language : German
Press the or button to select required menu (Primary
Secondary Audio Language : German
Audio Language, Secondary Audio Language, Primary
Primary Subtitle Language : German
Subtitle Language, Secondary Subtitle Language,
Secondary Subtitle Language : German
Primary Teletext Language, or Secondary Teletext
Primary Teletext Language : German
Language), then press the ENTER/OK button.
Continued...
English - 41
BN68-01743A.indb 41
2008-08-13 4:07:09
4. Setup
This menu consists of 8 sub-menus:
Menu Transparency, Parental Lock, Subtitle, Subtitle Mode,
Digital Text, Time Zone, Audio Format, and System.
4.1 Menu Transparency
You can set the translucency of the on-screen menu.
Press the or button to select required option (High,
Medium, Low, or Opaque), then press the ENTER/OK
button.
Setup
Menu Transparency : Medium
Parental Lock
Subtitle : On
Move
Enter
Return
Setup
Menu Transparency : Medium
High
Parental Lock Medium
Low
Subtitle : On
Opaque
Subtitle Mode : Normal
Audio Format : PCM
Move
Enter
Return
Setup
Menu Transparency : Medium
Parental Lock
Subtitle : On
Move
Enter
Return
Parental Lock
Enter PIN
..
Enter PIN
Return
Change PIN
Enter New PIN
..
Enter PIN
Return
Continued...
English - 42
BN68-01743A.indb 42
2008-08-13 4:07:10
Setup
4.3 Subtitle / Subtitle Mode / Audio Format / Digital Text
You can use various settings to suit your personal preferences.
Menu Transparency : Medium
are displayed.
Audio Format : PCM
selected.
Move
Enter
Return
Audio Format
Setup
You can only hear Dolby Digital sound through the audio
Menu Transparency : Medium
When sound is emitted from both the main speaker and the
Subtitle Mode : Normal
System
Move
Enter
Return
Continued...
English - 43
BN68-01743A.indb 43
2008-08-13 4:07:11
4.5 System
This menu consists of 5 sub-menus:
Product Information, Signal Information, Software Upgrade,
Common Interface, and Reset.
Product Information
You can view your product information. For service or repair,
please contact a Samsung approved dealer.
Press the ENTER/OK button with Product Information
selected. The product information menu is displayed.
Software Version / Firmware Version
Signal Information
You can get information about the signal status.
Press the ENTER/OK button with Signal Information
selected. The technical information for signal status is
displayed.
Service / Service ID / Multiplex / Network / Bit error
level / Signal Strength
Software Upgrade (Option)
To keep your product up-to-date with new digital television
features then software upgrades are periodically broadcast
as part of the normal television signal. It will automatically
detect these signals and display the software upgrade
banner. You are given the option to install the upgrade.
Software Inforamtion
Press the ENTER/OK button, then the current software
version is shown. To display the software version
information, press the ENTER/OK button again.
Manual Upgrade
Press the ENTER/OK button to search for new software
from the currently broadcasting channels.
Standby Mode Upgrade : On / Off
Press the ENTER/OK button. To continue software
upgrade with master power on, Select On by pressing
the or button.
45 minutes after entering standby mode, a manual
upgrade is automatically conducted. Since the power
of the unit is turned on internally, the screen may be
on slightly for the PDP product. This phenomenon may
continue for more than 1 hour until the software upgrade
is completed.
Setup
Digital Text
Time Zone
System
Move
Enter
Return
System
Product Information
Signal Information
Software Upgrade
Common Interface
Reset
Move
Enter
Return
Product Information
Software Version: T_BDXPDEU00_0710
Firmware Version: T_STDEU7_102c
Return
Signal Information
Service: ?
Service ID: 0000
Multiplex: ? (TSID 0000,ONID 0000)
Network: ? (ID 0000)
Bit error level:
10
Signal Strength:
0
Return
Software Upgrade
Software Information
Manual Upgrade
Move
Enter
Return
Continued...
English - 44
BN68-01743A.indb 44
2008-08-13 4:07:11
Application Info.
Common Interface
Installing the CI Card
Type: CA
a. Purchase the CI CAM module by visiting your nearest
Manufacturer: Canal Plus
dealer or by phone.
Info: Top Up TV
b. Insert the CI CARD into the CAM in the direction of
the arrow until it fits.
c. Insert the CAM with the CI CARD installed into the
common interface slot.
Return
Insert the CAM in the direction of the arrow, right
CI Menu
up to the end so that it is parallel with the slot.
d. Check if you can see a picture on a scrambled signal
channel.
You can install the CAM anytime whether the TV
is ON or OFF.
Application Info.
This contains information on CAM inserted in the CI slot
and displays it.
Move
Enter
Exit
Press the ENTER/OK button to display the
information for your application.
CI Menu
This helps the user select an item from the CAM-supported
menu.
Press the ENTER/OK button. The options of the selected menu are displayed.
Press the or button to select the required option, then press the ENTER/OK button.
Select the CI Menu based on the PC Card menu.
Reset
Reset
You can reset the values stored to the factory default values.
WARNING: All channel settings and user
The Reset operation deletes all channel information
preferences will be lost and returned to the
factory defaults. It is recommended that a
and user preferences returning all values to their default
reset is performed only when serious
factory state.
problems are experienced.
Press the ENTER/OK button with Reset selected. The
Enter PIN is displayed.
Enter your current 4-digit PIN code by using the numeric
Return
buttons (0~9). The warning message is displayed. All
values will be reset by pressing the coloured buttons
(red, green, yellow, and blue) in turn.
The default PIN of a new TV set is 0-0-0-0.
When PIN is changed in Child Lock, the PIN for
resetting automatically changes.
When reset is complete, it operates DTV Plug & Play
(DTV Auto Store, Time Zone-depending on the country, Time Setting) and exits from the digital
TV mode without changing to the analog TV mode. (Refer to page 11)
English - 45
BN68-01743A.indb 45
2008-08-13 4:07:12
What is Anynet+?
Anynet+ is an AV network system that enables an easy-to-use AV interface for users by controlling
all connected AV devices through the Anynet+ menu when Samsung Electronics AV devices are
connected.
HDMI Cable
HDMI Cable
HDMI Cable
TV
Anynet+ Device 1
Anynet+ Device 2
2
HDMI Cable
Home Theater
HDMI Cable
HDMI Cable
Anynet+ Device 3
HDMI Cable
Optical Cable
only the optical cable between [Digital Audio Out (Optical)] on your TV and Digital Audio
Connect
Input on the receiver.
Connect only one receiver.
can listen to 5.1 channel sound through the home theaters speakers. Otherwise, you can only
You
listen to 2 channel stereo sound in other cases. Make sure to connect the Digital Audio IN (Optical) of
the home theater and the TV correctly to listen to TV sound through the home theater. However, you
cannot listen to sound from the BD recorder that is sent to the home theater via the TV in 5.1 channel
sound because the TV outputs only 2 channel stereo sound. Please see the manual for the home
theater.
You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support
Anynet+ functions.
Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
Anynet+ supports up to 8 AV devices in total.
English - 46
BN68-01743A.indb 46
2008-08-13 4:07:12
Setting Up Anynet+
The following settings are to use Anynet+ functions.
Using the Anynet+ Function
1
2
TV
P1
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver
Setup
Move
Exit
:Off
Enter
Setup
Anynet+ (HDMI-CEC)
: OffOff
: OffOn
Searching Connections
Move
Enter
Return
button.
Setup
BN68-01743A.indb 47
2008-08-13 4:07:13
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected
to the TV.
Anynet+ Menu
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver
Setup
Description
Switches from Anynet+ to TV broadcast mode.
Your TV connects to the corresponding device.
Starts a recording. (This menu works only for a device supporting
recording.)
Shows the menu of the connected device.
Example. When a DVD Recorder is connected, the DVD Recorders
title menu appears.
Shows the play control menu of the connected device.
Example. When a DVD Recorder is connected, the play control
menu of the DVD Recorder appears.
Sound is output through the receiver.
You can set the environment for using Anynet+.
Anynet+ Device
Operating Status
After switching to the
device, when the menu of
the corresponding device is
displayed on the screen.
After switching to the device,
while playing a file
Available Buttons
Numeric buttons
////ENTER buttons
Color buttons
EXIT button
(Backward search)
(Forward search)
(Stop)
(Play/Pause)
CH / button
Audio Device
Anynet+ function only works when the remote control is set to TV.
The
REC button works only while in the recordable state.
The
cannot control Anynet+ devices using the buttons on the side of the TV. You can control Anynet+
You
devices only using the TV remote control.
TV remote control may not work under certain conditions. In this case, re-select the Anynet+
The
device.
Anynet+ functions dont operate for the products from other manufacturers.
The
mode, the color buttons may not work properly.
InTheAnynet+
, operations may differ depending on the device.
Recording
You can make a recording of a TV program using a recorder.
Press the REC button.
Recording begins. (Only when the Anynet+ enabled recording device is connected.)
The current TV program is recorded in the Watching TV status. If you are watching video from
another device, the video from the device is recorded.
You can also record the source streams by selecting Record after pressing the Anynet+ button.
Before recording, check whether the antenna jack is properly connected to the recording device.
For the antenna connection to the recording device, refer to its user manual.
English - 48
BN68-01743A.indb 48
2008-08-13 4:07:13
Select Device
ENTER/OK button.
Record
Device Operation
When the receiver is set to On, you can listen to the TV sound
Receiver :On
Setup
If the receiver is exclusively for a home theater only (supporting Move
Enter
audio only), it may not appear in the device list.
Exit
Only when you have connected the optical jack of the TV and
the receiver properly, does Receiver work.
In case of a content with copyright problem, listening through the receiver may not properly operate.
When listening through the receiver, there are restrictions for using the PIP and audio-related menu.
Check Points before Requesting Service
Symptom
Anynet+ does not work.
Solution
Check if the device is an Anynet+ device. The Anynet+ system
supports Anynet+ devices only.
Connect only one receiver.
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ devices Video/Audio/HDMI cable connections.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+
setup menu.
Check whether the TV remote control is in TV mode.
Check whether it is Anynet+ exclusive remote control.
Anynet+ doesnt work at a certain condition. (Searching channels)
When connecting or removing the HDMI cable, please make sure
to search devices again or restart your TV.
Check if the Anynet+ Function of Anynet+ device is set on.
Check if the Anynet+ device is properly connected to the TV and
check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup
menu.
Press the TV button on the TV remote control to switch to TV. Then
press the Anynet+ button to show the Anynet+ menu and select a
menu you want.
Select View TV in Anynet+ menu.
Press the SOURCE button on the TV remote control and select a
device other than Anynet+ devices.
Press any of CH, CH LIST, and PRE-CH to change to the
TV mode. (Note that the channel button operates only when a
tuner-embedded Anynet+ device is not connected.)
You cannot use the remote control when you are configuring
Anynet+ or switching to a view mode.
Use the remote control when the Anynet+ setting or switching to
view mode is complete.
The Anynet+ device does not You cannot use the play function when Plug & Play is in progress.
play.
The connected device is not Check whether or not the device supports Anynet+ functions.
displayed.
Check whether or not the HDMI cable is properly connected.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+
setup menu.
Search Anynet+ devices again.
You can connect an Anynet+ device using the HDMI cable only.
Some HDMI cables may not support Anynet+ functions.
The TV program cannot be
Check whether the antenna jack on the recording device is properly
recorded.
connected.
The TV sound is not output Connect the optical cable between TV and the receiver.
through the receiver.
English - 49
BN68-01743A.indb 49
2008-08-13 4:07:13
1 TV/DTV
Exit from the teletext display (depending on the model)
2
(index)
Used to display the index (contents) page at any time while you are
viewing teletext.
3
6
7
8
9
0
!
(teletext on/mix)
Press to activate teletext mode after selecting the channel providing
the teletext service. Press it twice to overlap the teletext with the
current broadcasting screen.
(size)
Press to display the double-size letters in the upper half of the
screen. For lower half of the screen, press it again.
To display normal screen, press it once again.
(mode)
Press to select the teletext mode (LIST/FLOF).
If you press it in the LIST mode, it switches into the List save mode.
In the List save mode, you can save teletext page into list using the
(store) button.
(sub-page)
Used to display the available sub-page.
(page up)
Used to display the next teletext page.
(page down)
Used to display the previous teletext page.
(cancel)
Used to display the broadcast when searching for a page.
(reveal)
Used to display the hidden text (answers to quiz games, for example). To display normal screen,
press it again.
Coloured buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting company, the different topics covered on a teletext
page are colour-coded and can be selected by pressing the coloured buttons. Press one of them
corresponding to the required. The page is displayed with other coloured information that can be
selected in the same way.
To display the previous or next page, press the corresponding coloured button.
(hold)
Used to hold the display on a given page if the selected page is
linked with several secondary pages which follow on automatically.
To resume, press it again.
(store)
Used to store the teletext pages.
Continued...
English - 50
BN68-01743A.indb 50
2008-08-13 4:07:14
Contents
Selected page number.
Broadcasting channel identity.
Current page number or search indications.
Date and time.
Text.
Status information.
FASTEXT information.
1
2
Install Wall Mount with the torque range of 15kgfcm or less. Make sure that parts can be damaged if
the torque is out of the specified range.
Accessory Kit contains HolderRing [] for installing other companys Wall-Mount on Samsung TV.
(Case B)
English - 51
BN68-01743A.indb 51
2008-08-13 4:07:15
Product Family
LCD-TV
PDP-TV
inch
VESA Spec. (A * B)
Standard Screw
23 ~ 26
200 * 100
M4
32 ~ 40
200 * 200
M6
46 ~ 52
600 * 400
57
700 * 400
(No VESA)
57 ~ 70
800 * 400
80 ~
1400 * 800
42 ~ 50
600 * 400
55 ~ 70
800 * 400
63
No VESA
80 ~
1400 * 800
Quantity
4
M8
4
M8
6
4
provided the standard dimensions for wall mount kits as shown in the table above.
We
purchasing our wall mount kit, a detailed installation manual and all parts necessary for
When
assembly are provided.
not use screws longer than the standard dimension, as they may cause damage to the inside of
Do
the TV set.
wall mounts that do not comply with the VESA standard screw specifications, the length of the
For
screws may differ depending on their specifications.
not use screws that do not comply with the VESA standard screw specifications.
Do
Do not use fasten the screws too strongly, this may damage the product or cause the product to fall,
leading to personal injury. Samsung is not liable for these kinds of accidents.
is not liable for product damage or personal injury when a non-VESA or non-specified wall
Samsung
mount is used or the consumer fails to follow the product installation instructions.
57 and 63 models do not comply with VESA Specifications. Therefore, you should use our
Our
dedicated wall mount kit for this model.
Do not exceed 15 degrees tilt when mounting this TV.
not install your Wall Mount Kit while your TV is turned on.
DIt omay
result in personal injury due to electric shock.
English - 52
BN68-01743A.indb 52
2008-08-13 4:07:15
If your VCR does not turn on after set-up, repeat steps 2, 3 and 4,
but try one of the other codes listed for your brand of VCR. If no
other codes are listed, try each VCR code, 000 through 080.
Note on Using Remote Control Modes: VCR
When your remote control is in VCR mode, the volume buttons still
control your TVs volume.
Continued...
English - 53
BN68-01743A.indb 53
2008-08-13 4:07:16
Continued...
English - 54
BN68-01743A.indb 54
2008-08-13 4:07:16
VCR
Brand
SAMSUNG
ADMIRAL
AIWA
AKAI
AUDIO DYNAMICS
BELL&HOWELL
BROKSONIC
CANDLE
CANON
CITIZEN
COLORTYME
CRAIG
CURTIS MATHES
DAEWOO
DB
DIMENSIA
DYNATECH
ELECTROHOME
EMERSON
FISHER
FUNAI
GENERAL ELECTRIC
GO VIDEO
LG(Goldstar)
HARMAN KARDON
HITACHI
INSTANT REPLAY
JC PENNEY
JCL
KENWOOD
KLH
LIOYD
LOGIK
LXI
JVC
MAGNAVOX
MARANTZ
MARTA
KONIA
ORION
MEI
MEMOREX
MGA
MIDLAND
MINOLTA
Code
000 001 002 003 004 005 077 078 079
020
025
004 027 032
007 026
018
022
002 003 006 008 015 055
021 056
002 003 006 008 015 055
007
002 024
002 007 008 017 021 025 056 064 066
003 010 011 012 013 014 015 016
007 026
017
025
034
001 003 006 021 022 025 030 032 034
040 047 050 052 060 063 065 066 067
069 073
018 024 028 029 048 051 061
025
002 005 017 021 056
002
006 007 008 009 010
007
019 025 041 042 074
021
002 007 018 019 021 026 037 041
054 056
007 008 018 021 026 037
007 008 018 026 037
070
025
038
025
081 082 083
021 056 059
007 008 018 021 026 037 062
006
036
073 074 075 076
021
006 021 024 025
034
005
019 041 075
Brand
MITSUBISHI
MONTGOMERY WARD
MTC
MULTITECH
NEC
OPTIMUS
PANASONIC
PENTAX
PENTEX RESEARCH+
PHILCO
PHILIPS
PIONEER
PORTLAND
PROSCAN
QUARTZ
QUASAR
RADIO SHACK/
REALISTIC
RCA
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHIMTOM
SIGNATURE
SONY
SYLVANIA
SYMPHONIC
TANDY
TASHIKA
TATUNG
TEAC
TECHNICS
TEKNIKA
TMK
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
YAMAHA
ZENITH
Code
019 034 041 046
020
002 025
002 005 025 038
007 008 018 026 037 062 064
020
021 056 071 072
019 041 075
008
021 056 059
021 080
019 026 039 053
015 049 055
017
018
021 056
006 018 020 021 024 025 029 034
048 056
002 017 019 021 035 041 043 057
068 076
026
018 024
003 047 052 067
006 018 019 024 028 029 041 048 051
020 034 045 015
027 033 038 058
025
027 033 044
021 025 056 059
025
018 025
006
037
025 037 068
021
006 021 025 031
066
003 019 029 051 052
002 006
002
007 026
026
007 026
002
002 003 006 019 020 021 024 025 034
038 041
007 008 018 026 037
023 027 033
Continued...
English - 55
BN68-01743A.indb 55
2008-08-13 4:07:17
CABLE BOX
Brand
SAMSUNG
GI
HAMLIN
HITACHI
JERROLD
MACOM
MAGNAVOX
OAK
PANASONIC
PHILIPS
PIONEER
RCA
REGAL
Code
000 001 002 003 004 005 006 007
041
003 024 031
025 030
038 039
025 030
019 023 028
026
003 022 027 037 044
019 021 023 028
004 018 020 044
014 022 040
003
Brand
REGENCY
SA
SCIENTIFIC ATLAN
SPRUCER
STARGATE 2000
SYLVANIA
TEXSCAN
TOCOM
UNIVERSAL
VIEWSTAR
WARNER AMEX
ZENITH
Code
015 023
042 043
042 043
022
036
016
016
032
033 034
019 021 023 028
046
017 029 035 037 045
Code
000 001 002 008 013
000 004 008 013
000 003 008 013
SET-TOP BOX
Brand
ALPHASTAR
ANAM
CHANNEL MASTER
CROSSDIGITAL
CHAPARRAL
DIRECT TV
DAEWOO
DISH NETWORK SYSTEM
DISHPRO
DRAKE
DX ANTENNA
ECHOSTAR
EXPRESSVU
GOI
GE
GENERAL INSTRUMENT
HTS
HOME CABLE
HITACHI
HUGHES NETWORK
IQ
IQ PRISM
JANEIL
JERROID
JVC
Code
023
043
018 034
019
035
015 016 017 019 022 045 060
061 062 065 066 067 068
074
069 070
069
018 024 032
027
025 069 070 071
069
069
065
046 047 048 063 064
069
056
022
015 017
020
020
059
063
069 070
Brand
LG(Goldstar)
MAGNAVOX
MEMOREX
MOTOROLA
MACOM
MITSUBISHI
NEXT LEVEL
PHILIPS
PRIMESTAR
PANASONIC
PAYSAT
PROSCAN
RCA
RADIOSHACK
REALISTIC
STS
STAR TRAK
SKY
SKY LIFE
SHACK
STAR CHOICE
SONY
TOSHIBA
ULTIMATE TV
UNIDEN
ZENITH
Code
044 073
016 021 036 038 039 040 041 042
016
064
018
015
047 048 064
015 016 017 021 033 036 038 039
040 041 042 067
046 049 050 063
058 059 061 062
016
065 066
051 052 053 065 066
064
057
020 027
026
031
005 006 007
064
064
054 060
015 017 028 029 030 072
060 066
016 021 037 055 056 057
024 031 068
Continued...
English - 56
BN68-01743A.indb 56
2008-08-13 4:07:17
SAMSUNG DVD
Product
DVD
DVDR
BD Record
VCR COMBO
VCR Record
DHR COMBO
Code
000 001 002
003 004
005 006
007 008 009 010 011
012
013
Product
Home Theater VCR COMBO
HDD Record COMBO
TWIN TRAY COMBO
STB DVD COMBO
DVD Receiver
AV Receiver
Code
014 015 016
017
018
019
020
021
DVD
Brand
ANAM
AUDIOVOX
AUDIOLOGIC
ANABA
APEX DIGITAL
AIWA
BROKSONIC
BLAUPUNKT
B&K
CURTIS MATHES
CYBER HOME
CLARION
CIRRUS
CINEVISION
DAEWOO
DENON
FARENHEIT
FISHER
GPX
GO VIDEO
GE
GREENHILL
HITACHI
HITEKER
HOYO
HARMAN / KARDON
IRT
INTEGRA
JBL
JVC
JATON
KENWOOD
KISS
KONKA
KLH
LG(Goldstar)
LOEWE
LASONIC
MOBILE AUTHORITY
MEMOREX
MALATA
MAGNAVOX
MINTEK
MONYKA
Code
030
075
085
072
070 071 074 086 083 084 088
111 112
114
062
074
122 123
027
065 077 078 079 082
080 125
081
095
066
146
067 068
090
060
061 089 133 135
069 074
074
064 113
071
073
091 110
089
092
091
022 033 115 116
073
051 108 109
073
059 100 106 107
074 075
025 031
057
058
054
055
056
076 093
074 094
073
Brand
NORCENT
NEXT BASE
NEC
NANTAUS
NESA
OPTOMEDIA ELECTRONICS
OPTIVIEW
ONKYO
PHILCO
PRINCETON
PROSCAN
PANASONIC
PHILIPS
ROTEL
RIO
RCA
RAITE
ROWA
SAMPO
SONY
SHERWOOD
SVA
SYLVANIA
SHARP
SANSUI
SANYO
SHINSONIC
SANYO
THOMSON
TOSHIBA
TECHNICS
TVIEW
TOKAI
TEAC
TECHWOOD
TREDEX
URBAN CONCEPTS
VENTURER
VOCOPRO
YAMAHA
YAMAKAWA
XWAVE
ZENITH
Code
048 049 050
052
053
144
074
105
072
076 092 119
044 045
046 047
023
024 034 124 134 136 137 138
036 076
117 118
120
023 035 074 075 131 132
073
038
104
026 029 126 127 128 129
130 141
039 041
042
043 093
140
062
062
094
090
145
028 062 076
139
072
073
096
097
098 099 101
076
075
102
032 063
040 073
103
076 121
English - 57
BN68-01743A.indb 57
2008-08-13 4:07:17
Warning
Firmly secure the stand to the TV
before moving it, as the stand may
fall and could cause serious injury.
or more people should carry
Two
the TV. Never lay the TV on the
Troubleshooting
Before contacting the Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of
the television and contact your local dealer.
No sound or picture
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the (Power) button (On/Off) on the front panel or press the POWER
button on the remote control.
Check the picture contrast and brightness settings.
Check the volume.
Check if Internal Mute is set to ON.
Normal picture but no sound
Check the volume.
Check whether the volume MUTE button on the remote control has been pressed.
No picture or black and white picture
Adjust the colour settings.
Check that the broadcast system selected is correct.
Sound and picture interference
Try to identify the electrical appliance that is affecting the television, then move it further away.
Plug the television into a different main socket.
Blurred or snowy picture, distorted sound
Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.
Remote control malfunctions
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check that the + and ends of the batteries are inserted correctly.
Check that the batteries are drained.
Screen is black and power indicator light blinks steadily
On your computer check; Power, Signal Cable.
The TV is using its power management system.
Move the computers mouse or press any key on the keyboard.
On your equipment check (STB, DVD, etc) ; Power, Signal Cable.
The TV is using its power management system.
Press the Source button on the panel or remote control.
Turn the TV off and on.
The damaged picture appears in the corner of the screen.
If Just Scan is selected in some external devices, the damaged picture may appear in the corner of
the screen. This symptom is caused by external devices, not TV.
English - 58
BN68-01743A.indb 58
2008-08-13 4:07:19
Specifications
The descriptions and characteristics in this booklet are given for information purposes only and
are subject to modification without notice.
Model Name
PS42A417
42 inch
PC Resolution
1024 x 768 @ 60 Hz
Sound (Output)
10 W x 2
Dimension (WxHxD)
Body
1055 x 700 x 95 mm
With stand
Weight
Body
31 kg
With stand
34 kg
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
10 C to 40 C (50 F to 104 F)
10% to 80%, non-condensing
-20 C to 45 C (-4 F to 113 F)
5% to 95%, non-condensing
English - 59
BN68-01743A.indb 59
2008-08-13 4:07:19
BN68-01743A.indb 60
2008-08-13 4:07:19
BN68-01743A.indb 61
2008-08-13 4:07:19
BN68-01743A.indb 62
2008-08-13 4:07:19
PDP-TELEVISION
(PLASMA DISPLAY PANEL)
Owners Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
Picture In Picture (PIP)
Energy Saving
TELETEXT (Option)
SRS TruSurround XT
Digital Natural Image engine
Register your product at www.samsung.com/global/register
Record your Model and Serial number here for future reference.
Model _______________ Serial No. _______________
BN68-01743A.indb 63
2008-08-13 4:07:20
Instructions dutilisation
Rmanence lcran
Ne figez pas dimages (telle quune image de jeu vido ou de PC branch lcran plasma) sur
lcran du moniteur plasma pendant plus de deux heures car cela peut entraner une rmanence
lcran. Cette rmanence est galement appele brlure dcran. Pour viter la rmanence,
rduisez le niveau de contraste ou de luminosit de lcran lorsque vous affichez une image fige.
Hauteur
Lcran plasma est normalement conu pour tre utilis une altitude infrieure 2000m. Il peut
fonctionner de faon anormale au-dessus de 2000m daltitude. Ne linstallez pas et ne le faites donc
pas fonctionner dans ces conditions.
Chaleur diffuse sur la partie suprieure du tlviseur plasma
Le dessus de lappareil peut chauffer en cas dutilisation prolonge, car la chaleur schappe du
panneau par le trou daration situ dans la partie suprieure du produit. Ce phnomne est normal
et nindique aucunement la prsence dun dfaut ou dun dysfonctionnement. Il convient cependant
dempcher les enfants de toucher la partie suprieure de lcran.
Le produit fait un bruit de claquement.
Ce bruit de claquement risque dtre perceptible lorsque le produit se contracte ou stend suite
un changement du milieu ambiant, tel que la temprature ou lhumidit. Ce phnomne est normal et
ne constitue pas un dfaut.
Dfauts de cellule
Lcran plasma utilise un panneau constitu de 1230000 (niveau SD) 3150000 (niveau HD)
pixels dont la fabrication fait appel une technologie avance. Il se peut toutefois que des points
clairs ou sombres apparaissent lcran. Ils nont aucune incidence sur la performance du produit.
Evitez dutiliser le tlviseur plasma des tempratures infrieures 5C (41F).
Une image fige affiche pendant une priode prolonge peut endommager dfinitivement
lcran PDP.
Visionner pendant longtemps le tlviseur plasma en format 4/3 risque de
laisser apparatre des traces de bordures sur la gauche, sur la droite et au
centre de lcran. Ces traces sont dues la diffrence de luminosit sur lcran.
Lire un DVD ou un jeu vido sur console risque de provoquer un effet similaire
sur lcran. Les dommages provoqus par leffet susmentionn ne sont pas
couverts par la garantie.
Rmanence de limage lcran.
Une rmanence partielle de limage peut ventuellement se produire si des images figes de jeux
vido et dun PC restent affiches pendant un certain temps. Pour empcher ce phnomne,
rduisez la luminosit et le contraste en cas daffichage dimages figes.
Garantie
- La garantie ne couvre pas les dommages causs par la rmanence.
- Les brlures ne sont pas couvertes par la garantie.
Installation
Contacter un centre de service agr si le tlviseur est destin une installation dans des
endroits exposs la poussire, des tempratures faibles ou leves, une forte humidit,
des substances chimiques et sil a t prvu pour fonctionner en permanence, comme dans
des aroports, des gares ferroviaires, etc. Le non-respect de ce qui prcde peut gravement
endommager le tlviseur.
Toute fonction relative la tlvision numrique (DVB) ne peut fonctionner que dans un pays ou
une rgion o des signaux terrestres numriques de type DVB-T (MPEG2) sont diffuss. Consultez
votre revendeur pour savoir si vous pouvez recevoir des signaux DVB-T. Bien que ce tlviseur
soit conforme la norme DVB-T, il nest pas garanti quil soit compatible avec les futures missions
terrestres numriques DVB-T. Il se peut que certaines fonctionnalits ne soient pas disponibles dans
certains pays.
Franais -
BN68-01743A-00Fre.indd
2008/08/13
11:34:22
Sommaire
Informations gnrales
Fonctionnement
Mise en marche et arrt de votre tlviseur..... 9
Affichage des menus..................................... 10
Fonction Plug & Play...................................... 10
Visualisation dune source de signal externe..... 12
Modification du nom des priphriques......... 13
Affichage PC
Configuration de votre logiciel PC
(base sur WindowsXP).................................. 30
Mode dentre (PC)........................................ 31
Rglage du PC............................................... 32
Branchement de lensemble PC Home
cinma........................................................... 33
Franais
Instructions dutilisation.................................... 2
Vrification des pices..................................... 4
Utilisation de la base-support........................... 4
Panneau de configuration ............................... 5
Panneau de connexion.................................... 6
Prsentation de la tlcommande................... 8
Rglage de limage
Changement de la norme Image................... 18
Personnalisation des paramtres dimage..... 18
Rglages des dtails de limage.................... 19
Slection de la taille de limage...................... 20
Slection du mode daffichage....................... 20
NR numrique / Couleur active / DNIe /
Movie Plus..................................................... 21
Arrt sur image.............................................. 21
Rglage du son
Fonctions audio.............................................. 22
Slection du mode Son
(en fonction du modle)................................. 23
A propos de Anynet+
Quest-ce que Anynet+?.....................................46
Connexion dappareils Anynet+..................... 46
Configuration dAnynet+................................ 47
Recherche dappareils Anynet+ et
basculement entre des appareils................... 47
Enregistrement............................................... 48
Ecoute via un rcepteur................................. 49
Vrifications avant de faire appel
au service dassistance.................................. 49
Annexe
Fonction de tltexte (en fonction du modle)... 50
Prparation avant linstallation dun
dispositif de fixation murale............................ 51
Caractristiques du kit de fixation murale (VESA).... 52
Rglage de la tlcommande........................ 53
Assemblage de la base-support
(en fonction du modle)................................... 58
Dpannage.................................................... 58
Caractristiques............................................. 59
Fonctions dhorloge........................................ 24
Langue / Ecran Bleu / Mlodie /
Effet lumineux / Mode co. /
Important
Remarque
Symboles
Appuyez sur
Franais -
BN68-01743A-00Fre.indd
2008/08/13
11:34:23
Manuel dutilisation
Tlcommande/piles AAA
Carte de garantie/
Manuel de scurit
(Non disponible dans
tous les pays)
Cordon dalimentation
Tore magntique
pour cordon d
alimentation
Chiffon de nettoyage
Tore magntique
pour S-Vido
Tore magntique
de cble de casque
Vendu sparment
Cble S-Vido
Cble dantenne
Cbles composants
Cbles audio
Cble vido
Cble PC
Cble SCART
Cble audio PC
Cble HDMI
Cble HDMI/DVI
Utilisation de la base-support
plasma doit tre soulev
Lcran
par plusieurs personnes. Ne posez
-20 ~ 20
Franais -
BN68-01743A-00Fre.indd
2008/08/13
11:50:28
Panneau de configuration
Panneau avant (ou latral)
ENTER
Dans le menu du tlviseur, ce bouton a la
mme fonction que le bouton ENTER de la
tlcommande.
Bouton (Marche/Arrt)
Permet dallumer et dteindre le tlviseur.
2 MENU
Permet dafficher le menu des fonctions de
votre tlviseur sur lcran.
3 y+
Appuyez pour augmenter ou rduire le volume.
Dans le menu affich lcran, utilisez les
boutons y+ de la mme faon que les
b.outons et de la tlcommande.
4
C/P.
Permet de changer de canal. Dans le menu
affich lcran, utilisez les boutons
C/P.
de la mme faon que les b.outons et
de la tlcommande.
Tmoin dalimentation
Clignote et steint lorsquil est sous tension et
sallume en mode Veille.
Capteur de la tlcommande
Dirigez la tlcommande vers ce point du
tlviseur.
7 Haut-parleur
Franais -
BN68-01743A-00Fre.indd
2008/08/13
11:34:26
Panneau de connexion
Panneau latral
1
2
ou
3 Prise casque
Vous pouvez brancher un casque si vous
souhaitez regarder la tlvision sans dranger
les autres personnes prsentes dans la pice.
Lutilisation prolonge dun casque un
niveau sonore lev peut endommager
loue.
Panneau arrire
1
ou
Tlvision cble
Rseau
8
ou
BN68-01743A-00Fre.indd
Suite
2008/08/13
11:34:30
1 ENTREE ALIMENTATION
Permet de raccorder le cordon
dalimentation fourni.
2 Connexion de priphriques audio externes
Connectez les signales audio RCA de
la TV une source externe, telle quun
quipement audio.
3 EXT 1, EXT 2
Entres ou sorties pour priphriques tels que
des magntoscopes, des lecteurs DVD, des
consoles de jeux vido ou des lecteurs de
vidodisques.
Spcifications entre/sortie
Connecteur
EXT 1
EXT 2
Entre
Sortie
Vido Audio (G/D) RGB Vido + Audio (G/D)
Seule la sortie TV ou
DTV est disponible.
Sortie que vous
pouvez slectionner.
4 COMPONENT IN
Entres audio (AUDIO G/D) et vido (Y/PB/PR)
pour Composant.
5 DIGITAL AUDIO OUT (OPTICAL)
A connecter un composant audio numrique.
6 SERVICE
Prise pour tests.
Branchez la prise jack srie entre
lquerre murale commande lectrique
et votre tlviseur, de manire pouvoir
ajuster langle de visualisation du tlviseur
laide de la tlcommande.
7 PC IN / AUDIO
Pour raccorder la prise de sortie vido et audio
de votre PC.
8 Logement pour INTERFACE COMMUNE
Insrez la carte dinterface commune dans ce
logement. (reportez-vous la page45).
Si vous ninsrez pas la carte dint erface
commune dans certaines chanes, Signal
brouill saffiche sur lcran.
Les informations de pairage contenant
un numro de tlphone, lID de la carte
dinterface commune, lID de lhte et
dautres informations safficheront dans les
2ou3minutes. Si un message derreur
saffiche, contactez votre prestataire de
service.
Lorsque la configuration des informations
sur les canaux est termine, le message
Mise jour termine saffiche, indiquant que
la liste des canaux est dornavant mise
jour.
Insrez la carte dinterface commune (CICard) dans le sens indiqu sur celle-ci.
9 HDMI IN 1, HDMI IN 2
A connecter la prise HDMI dun
priphrique quip dune sortie HDMI.
Ces entres peuvent galement tre
utilises comme connexion DVI des
entres audio analogiques spares. Cette
connexion ncessite un cble HDMI/DVI en
option. Lors de lutilisation de ladaptateur
HDMI/DVI en option, les entres audio
analogiques DVI de votre tlviseur vous
permettent de recevoir le son de gauche et
de droite provenant de votre priphrique
DVI. (Non compatible avec le mode PC)
Lorsque vous connectez ce produit un
dcodeur, un lecteurDVD, une console
de jeu, etc. via HDMI ou DVI, veillez le
dfinir dans un mode compatible avec une
sortie vido, comme illustr dans le tableau
ci-dessous. Dans le cas contraire, vous
risquez une distorsion, rupture ou absence
dimage.
Nessayez pas de relier le connecteur
HDMI/DVI un PC ou une carte graphique
pour ordinateur portable. (Cela afficherait un
cran vide)
DVI IN (HDMI 2) AUDIO L/R
Sorties audio DVI pour priphriques externes.
0 ANT IN
Connecteur coaxial 75 pour rseau cbl/
hertzien.
Modes pris en charge pour HDMI et Component
(Composant)
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Composant
Franais -
BN68-01743A-00Fre.indd
2008/08/13
11:34:31
Prsentation de la tlcommande
est une tlcommande spciale destine aux malvoyants. Elle dispose de points Braille sur
Ceci
les boutons Power, Channel, Volume, STOP et PLAY/PAUSE.
Une lumire intense peut affecter le bon fonctionnement de la tlcommande.
1 Bouton POWER (permet
dallumer et dteindre le
tlviseur)
2 Pav numrique pour
laccs direct aux canaux
3 Slection de canaux 1 ou
2 chiffres
4 Bouton de gestion des
chanes (Reportez-vous la
page 15)
5 Slectionne directement le
mode TV et DTV
6
Augmentation du volume
Rduction du volume
7 Suppression temporaire du son
8 Affiche le menu principal
lcran
9 Revient au menu prcdent
@ Slection de la taille de
limage
# Affichage de lEPG
(Guide lectronique des
programmes)
$ Slection du mode Son
% Configuration de la
tlcommande
^ Slectionne un dispositif
cible qui sera command par
la tlcommande Samsung
(TV, DVD, dcodeur, cble,
magntoscope)
& Appuyez pour activer le
rtroclairage de VOL, CH
et le bouton de source active
(TV, DVD, CABLE, STB,
VCR) sur la tlcommande.
* Slection de la source
disponible
( Canal prcdent
) Affichage du menu DTV
a Enregistrement de
programmes en direct
b Fonctions du magntoscope/
lecteur DVD (retour en
arrire, arrt, lecture/pause,
avance rapide)
c
Canal suivant
Canal prcdent
d Permet de quitter le menu
affich lcran
e Permet de commander le
curseur dans le menu
f Permet dafficher les
informations relatives au
programme en cours
g Actionne les fonctions
daffichage Anynet+ et
configure les priphriques
Anynet+.
h Marche/Arrt du mode PIP
i Slection de leffet dimage
(reportez-vous la page18)
j Affichage numrique des
sous-titres
k Mise en pause de limage
l Si la tlcommande ne
fonctionne pas correctement,
retirez les piles, puis
appuyez sur le bouton de
rinitialisation pendant
environ 2 3secondes.
Replacez les piles et
ressayez dutiliser la
tlcommande.
Fonctions tltexte
(Reportez-vous la page50)
5 Permet de quitter laffichage
tltexte (en fonction du
modle)
8 Index du tltexte
0 Slection des rubriques
Fastext
! Affichage tltexte/
informations relatives au
tltexte et programme
normal
@ Taille du tltexte
* Slection du mode Tltexte
(LIST/FLOF)
( Page tltexte secondaire
c P :Page tltexte
suivante
P :Page tltexte
prcdente
d Annulation du tltexte
f Activation du tltexte
h Pause tltexte
i Mmorisation du tltexte
Suite
Franais -
BN68-01743A-00Fre.indd
2008/08/13
11:34:32
Franais -
BN68-01743A-00Fre.indd
2008/08/13
11:34:32
2
3
4
5
TV
Image
Mode
: Dynamique
Contraste 100
Luminosit 45
Nettet 75
Couleur
55
Teinte
V 50
R 50
Nuance Coul.
: Froide1
Plus
Dplacer
Entrer
Quitter
OK
BN68-01743A-00Fre.indd
10
Retour
Langue
Dplacer
Entrer
Ignorer
Dplacer
Domicile
Entrer
Ignorer
Entrer
Ignorer
Franais - 10
Entrer
Pays
Dplacer
Belgique
France
Allemagne
Italie
Entrer
Ignorer
Suite
2008/08/13
11:34:34
7
8
10
11
12
13
14
Franais - 11
BN68-01743A-00Fre.indd
11
Suite
2008/08/13
11:34:35
15
2007
Heure Minute
12
Rgler
Date Anne
01
00
Dplacer
Slect.
Ignorer
TV
Configuration
Plug & Play
Langue
: Franais
Horloge
Mode Jeu
: Arrt
Ecran Bleu
: Arrt
Mlodie
: Arrt
PC
PC Home cinma : Arrt
Effet lumineux
: Arrt
Plus
Dplacer
Entrer
Retour
TV
Entre
Liste Source
: TV
Modif. Nom
Anynet+
Dplacer
TV
Entrer
Retour
Liste Source
TV
Ext.1
Ext.2
AV
S-Vido
Composant
PC
HDMI1
HDMI2
HDMI3
DTV
Dplacer
:
:
:
:
:
:
:
:
:
:
Entrer
Retour
Franais - 12
BN68-01743A-00Fre.indd
12
2008/08/13
11:34:37
Entre
TV
Liste Source
: TV
Modif. Nom
Anynet+
Entrer
Retour
Modif. Nom
Ext.1
Ext.2
AV
S-Vido
Composant
PC
HDMI1
HDMI2
HDMI3
Dplacer
TV
:
:
Magntoscope
: DVD
: D-VHS
:
Dcodeur Cble
:
Dcodeur HD
:
Dcodeur satellite
:
:
Dplacer
TV
Entrer
Retour
Canal
Belgique
Pays
: France
Mmorisation Auto
France
Mmorisation Manuelle Allemagne
Gestionnaire de Chanes
Italie
Tri des canaux
Pays-Bas
Nom station
Espagne
Rglage fin
LNA
: Arrt
Dplacer
TV
Entrer
Retour
Canal
Pays
: France
Mmorisation Auto
Mmorisation Manuelle
Gestionnaire de Chanes
Tri des canaux
Nom station
Rglage fin
LNA
: Arrt
Dplacer
Entrer
Retour
Mmorisation Auto
P 1
--
40 MHz
0 %
Dmarrer
Entrer
Retour
Franais - 13
BN68-01743A-00Fre.indd
13
2008/08/13
11:34:39
TV
Canal
Pays
: France
Mmorisation Auto
Mmorisation Manuelle
Gestionnaire de Chanes
Tri des canaux
Nom station
Rglage fin
LNA
: Arrt
TV
Dplacer
Entrer
Retour
Mmorisation Manuelle
Programme
: P 1
Systme de Couleur : Auto.
Systme Sonore : BG
Canal
: C
4
Recherche
: 63 MHz
Mmoriser
: ?
Dplacer
Entrer
Retour
Canal
Mode
P (Mode Programme) : A la fin du rglage, des numros de position compris entre P00 et
P99 sont attribus aux stations de radiodiffusion de votre zone. Dans ce mode, vous pouvez
slectionner un canal en saisissant son numro de position.
C (mode chane hertzienne): dans ce mode, vous pouvez slectionner un canal en saisissant le
numro attribu chacune des stations de tldiffusion.
S (mode chane cble): dans ce mode, vous pouvez slectionner un canal en saisissant le
numro attribu chacun des canaux cbls.
Franais - 14
BN68-01743A-00Fre.indd
14
2008/08/13
11:34:39
Ajout/verrouillage de canaux
Non disponible en mode DTV ou en mode dentre externe.
TV
Canal
Pays
: France
Mmorisation Auto
Mmorisation Manuelle
Gestionnaire de Chanes
Tri des canaux
Nom station
Rglage fin
LNA
: Arrt
Verrouillage de canaux
Cette fonction, qui bloque la vido et coupe le son, vous permet
dviter toute utilisation non autorise, par des enfants par exemple,
qui pourraient visionner des programmes ne leur tant pas destins.
6
Dplacer
TV
Entrer
Retour
Gestionnaire de Chanes
Liste des chanes
Verrouillage Parental : Arrt
Dplacer
Entrer
Retour
1 / 10
Prog.
0
1
2
3
4
5
6
7
8
9
C -C4
C 24
C2
C5
C 80
C7
C 36
C 52
C 11
Franais - 15
BN68-01743A-00Fre.indd
15
2008/08/13
11:34:42
TV
Canal
Pays
: France
Mmorisation Auto
Mmorisation Manuelle
Gestionnaire de Chanes
Tri des canaux
Nom station
Rglage fin
LNA
: Arrt
Dplacer
TV
Entrer
Retour
Ch.
Nom station
C
C76
C5
C6
C7
Dplacer
TV
Entrer
Retour
Canal
Pays
: France
Mmorisation Auto
Mmorisation Manuelle
Gestionnaire de Chanes
Tri des canaux
Nom station
Rglage fin
LNA
: Arrt
Dplacer
TV
Entrer
Retour
Nom station
Prog.
0
1
2
3
4
C
C76
C5
C6
C7
Dplacer
Entrer
Retour
Franais - 16
BN68-01743A-00Fre.indd
16
2008/08/13
11:34:42
Dplacer
Entrer
Retour
Rglage fin
P 1
Canal
Pays
: France
Mmorisation Auto
Mmorisation Manuelle
Gestionnaire de Chanes
Tri des canaux
Nom station
Rglage fin
LNA
: Arrt
+3
Rinitial.
Rgler
Sauveg.
Retour
P 1*
Mono
Image
Son
SRS TS XT
:
: Dynamique
: Personnalis
: Arrt
Pays
: France
Mmorisation Auto
darrive.
Nom station
Rglage fin
Franais - 17
BN68-01743A-00Fre.indd
17
2008/08/13
11:34:43
TV
Image
Mode
: Dynamique
Contraste 100
Luminosit 45
Nettet 75
Couleur
55
Teinte
V 50
R 50
Nuance Coul.
: Froide1
Plus
Dplacer
TV
Entrer
Retour
Image
Dynamique
Mode
: Dynamique
Standard
Contraste
100
Cinma
Luminosit
45
Nettet 75
Couleur
55
Teinte
V 50
R 50
Nuance Coul.
: Froide1
Rglages des dtails
Plus
Dplacer
Entrer
Retour
TV
Image
Mode
: Dynamique
Contraste 100
Luminosit 45
Nettet 75
Couleur
55
Teinte
V 50
R 50
Nuance Coul.
: Froide1
Plus
TV
Dplacer
Entrer
Retour
Image
Mode
: Dynamique
Contraste 100
Luminosit 45
Nettet 75
Couleur
55
Teinte
V 50
Froide2 R 50
Nuance Coul.
: Froide1
Froide1
Rglages des dtails Normal
Chaude1
Plus
Chaude2
Franais - 18
BN68-01743A-00Fre.indd
18
2008/08/13
11:34:44
TV
Image
Mode
: Cinma
Contraste 80
Luminosit 65
Nettet 35
Couleur
35
Teinte
V 50
R 50
Nuance Coul.
: Chaude2
Rglages des dtails
Plus
TV
Entrer
Retour
Dplacer
Dplacer
Entrer
Retour
Franais - 19
BN68-01743A-00Fre.indd
19
2008/08/13
11:34:45
Couleur active
: Marche
Movie Plus
: Marche
Couleur
active
: Marche
Movie Plus
: Marche
BN68-01743A-00Fre.indd
20
2008/08/13
11:34:46
NR numrique
: Auto.
Options disponibles: NR numrique, Couleur active, DNIe,
DNIe
: Arrt
Movie Plus
: Marche
Movie Plus
Rinitialiser
: OK
Franais - 21
BN68-01743A-00Fre.indd
21
2008/08/13
11:34:47
Fonctions audio
1
2
Silence Int.
: Arrt
Egaliseur: Balance/100Hz/300Hz/1kHz/3kHz/10kHz
Volume auto
: Arrt
Silence Int.
: Arrt
Franais - 22
BN68-01743A-00Fre.indd
22
2008/08/13
11:34:48
Indication lcran
Programme normal
(Audio standard)
NICAM
Mono
(Normal)
NICAM Stro
NICAM
Stro
Mono
(Normal)
NICAM
Stro
NICAM DUAL-I/II
A2
Stro
NICAM
dual 1
NICAM
dual 2
Programme normal
(Audio standard)
Bilingue ou DUAL-I/II
Dual I
Stro
Stro
Mono
(Normal)
Franais - 23
BN68-01743A-00Fre.indd
23
2008/08/13
11:34:49
Fonctions dhorloge
1
2
TV
Configuration
Appuyez sur le bouton MENU pour afficher le menu.
Mode Jeu
: Arrt
Mlodie
: Arrt
Effet lumineux
: Arrt
, puis appuyez sur le bouton ENTER/OK.
Plus
Options disponibles: Rglages Horloge, Veille, Minuteur 1,
Dplacer
Entrer
Retour
Minuteur 2, Minuteur 3
5 Lorsque vous tes satisfait du rglage, appuyez sur le bouton
TV
Horloge
ENTER/OK.
Rglage Horloge : 00 : 00
Veille
: Arrt
Franais - 24
BN68-01743A-00Fre.indd
24
2008/08/13
11:34:49
TV
Configuration
Appuyez sur le bouton MENU pour afficher le menu.
Mode Jeu
: Arrt
Mlodie
: Arrt
Options disponibles: Langue, Ecran Bleu, Mlodie, Effet
PC Home cinma : Arrt
Effet
lumineux
: Arrt
lumineux, Mode co., Niveau noir HDMI
Plus
4 Lorsque vous tes satisfait du rglage, appuyez sur le bouton
Dplacer
Entrer
Retour
ENTER/OK.
TV
Configuration
5 Appuyez sur le bouton EXIT pour quitter le menu.
Plus
Langue
Ajustement fixation murale
Franais - 25
BN68-01743A-00Fre.indd
25
2008/08/13
11:34:50
Langue
: Franais
raliste en slectionnant le menu Jeu.
Horloge
Mode Jeu
: Arrt
PC
Effet lumineux
: Arrt
3 Appuyez sur le bouton ou pour slectionner Mode Jeu,
Plus
puis appuyez sur le bouton ENTER/OK.
Dplacer
Entrer
Retour
4 Slectionnez Arrt ou Marche en appuyant sur le bouton
ou , puis appuyez sur le bouton ENTER/OK.
5 Appuyez sur le bouton EXIT pour quitter le menu.
Pour dconnecter la console de jeu et connecter un autre priphrique externe, annulez le mode
Jeu dans le menu Image.
Si vous affichez le menu TV dans le mode Jeu, lcran tremble lgrement.
Le mode Jeu nest pas disponible en mode TV.
Si le mode Jeu est activ:
Le mode Image est automatiquement dfini sur Standard. Les utilisateurs ne peuvent pas
changer de mode.
Le mode Son du menu Son est dsactiv. Rglez le son laide de lgaliseur.
La fonction Rinitialiser du menu Son est active. Slectionner la fonction Rinitialiser aprs
avoir rgl lgaliseur rtablit ses paramtres par dfaut.
Franais - 26
BN68-01743A-00Fre.indd
26
2008/08/13
11:34:50
TV
Configuration
Plus
Ajustement fixation murale
Mode co.
: Arrt
Niveau noir HDMI : Bas
PIP
Protection brlure cran
Dplacer
Bouton
Entrer
Retour
Position
Rgler
1
INFO
2
Centre
3
Quitter
Description
Rglage de langle de la fixation
murale
Rinitialiser
Mmorisation de la position et
dplacement jusqu la position
mmorise
Franais - 27
BN68-01743A-00Fre.indd
27
2008/08/13
11:34:52
PIP
Source
: TV
Options disponibles: PIP(Marche/Arrt), Source, Taille,
Taille
:
Position, Programme
Position
:
Programme
: P 1
Tlviseur
numrique
HDMI
PC
Franais - 28
BN68-01743A-00Fre.indd
28
2008/08/13
11:34:53
TV
TV
Nbre point
1
horizont.
Nbre ligne vertic.
1
Horloge (minutes) 2 min.
Dplacer
Entrer
Retour
TV
PC
Configuration
Plus
Ajustement fixation murale
Mode co.
: Arrt
Niveau noir HDMI : Bas
PIP
Protection brlure cran
Dplacer
Entrer
Retour
Modif. pixel
Modif. pixel
: Marche
Nbre point horizont. : 2
Nbre ligne vertic. : 2
Horloge
: 2 min.
Dplacer
Entrer
Retour
TV/Ext/AV/S-Vido/Composant/
PC/HDMI/DTV
2
2
2 min.
La valeur de Modif. pixel peut changer selon le mode et la taille du moniteur (pouces).
Ecran blanc: Cette fonction aide supprimer les images rsiduelles lcran en modifiant la couleur
des pixels pour les faire devenir blancs. Utilisez cette fonction lorsque des images rsiduelles ou
des symboles apparaissent lcran, particulirement lorsque vous affichez une image fixe lcran
pendant longtemps.
Ex. de signal: Cette fonction aide supprimer les images rsiduelles lcran en dplaant tous les
pixels sur lcran, selon un motif prdfini. Utilisez cette fonction lorsque des images rsiduelles ou
des symboles apparaissent lcran, particulirement lorsque vous affichez une image fixe lcran
pendant longtemps.
Gris de bord: Si vous regardez la tlvision dans un rapport dcran 4:3, lcran est protg contre
tout dommage grce lajustement de la balance des blancs sur les cts gauche et droit.3
Sombre: Si le rapport dcran est fix 4:3, les bords gauche et droit sont assombris.
Clair: Si le rapport dcran est fix 4:3, les bords gauche et droit sont claircis.
Pour supprimer les images rsiduelles de lcran, utilisez la fonction Ecran blanc ou Ex. de signal.
Bien que ces deux fonctions suppriment les images rsiduelles lcran, Ex. de signal est plus
efficace.
La fonction de suppression dimages rsiduelles doit tre excute pendant longtemps (environ une
heure) pour supprimer efficacement les images rsiduelles. Si limage rsiduelle nest pas supprime
aprs lexcution de cette fonction, rptez lopration.
Appuyez sur nimporte quel bouton de la tlcommande pour annuler cette fonction.
Franais - 29
BN68-01743A-00Fre.indd
29
2008/08/13
11:34:53
Franais - 30
BN68-01743A-00Fre.indd
30
2008/08/13
11:34:54
Rsolution
(Point x
ligne)
Frquence
verticale
(Hz)
Frquence
horizontale
(kHz)
Polarit
verticale
Polarit
horizontale
PS42A417
640 x 350
720 x 400
70.086
70.087
59.940
70.000
72.809
75.000
60.317
70.000
72.188
75.000
60.004
70.069
72.000
75.029
31.469
31.469
31.469
35.000
37.861
37.500
37.879
43.750
48.077
46.875
48.363
56.476
57.672
60.023
N
P
N
N/P
N
N
P
N/P
P
P
N
N
N/P
P
P
N
N
N/P
N
N
P
N/P
P
P
N
N
N/P
P
640 x 480
Compatible
IBM PC / AT
800 x 600
1024 x 768
Franais - 31
BN68-01743A-00Fre.indd
31
2008/08/13
11:34:54
Rglage du PC
Prrglez le mode PC en utilisant le bouton SOURCE.
1
2
TV
Configuration
Plug & Play
Langue
: Franais
Horloge
Mode Jeu
: Arrt
Ecran Bleu
: Arrt
Mlodie
: Arrt
PC
PC Home cinma : Arrt
Effet lumineux
: Arrt
Plus
Dplacer
Entrer
TV
Retour
PC
Verrouillage Image
Position
Rglage Automatique
Rinitialiser Image
TV
Dplacer
Entrer
Retour
Verrouillage Image
Regl. Base
Regl. Prec
Dplacer
TV
Entrer
50
31
Retour
Position
Dplacer
Entrer
Retour
Franais - 32
BN68-01743A-00Fre.indd
32
2008/08/13
11:34:55
Langue
: Franais
Si vous activez la fonction PC Home cinma, vous pouvez
Horloge
Ecran Bleu
: Arrt
PC.
PC
Franais - 33
BN68-01743A-00Fre.indd
33
2008/08/13
11:34:55
Guide
Guide Now & Next
Guide Complet
Liste en annexe
Par dfaut
Dplacer
: Guide Complet
Entrer
Quitter
Canal
Mmorisation Auto
Mmorisation Manuelle
Dplacer
Entrer
Quitter
Configuration
Transparence du menu : Moyen
Verrouillage parental
Sous-titres : Marche
Dplacer
Entrer
Quitter
Suite
Franais - 34
BN68-01743A-00Fre.indd
34
2008/08/13
11:34:56
Langue
Langue audio
Langue des sous-titres
Langue du tltexte
Prfrence
Premire Langue Audio
Deuxime Langue Audio
Premire Langue de Soustitres
Deuxime langue de Sous-titres
Premire Langue Tltexte
Deuxime Langue Tltexte
Langue
Langue audio
Langue des sous-titres
Langue du tltexte
Prfrence
Dplacer
Entrer
Quitter
lments secondaires du menu CI peuvent tre diffrents selon le modle CAM. (reportez-vous
Les
la page45)
Quitter
Franais - 35
BN68-01743A-00Fre.indd
35
2008/08/13
11:34:58
Canal
Ce menu compte 4 sous-menus:
Mmorisation Auto, Mmorisation Manuelle, Modif. les
canaux favoris et Liste des chanes.
Appuyez sur le bouton ou pour slectionner Canal,
puis appuyez sur le bouton ENTER/OK. Le menu Canal
saffiche.
Canal
Mmorisation Auto
Mmorisation Manuelle
Dplacer
Entrer
Quitter
Canal
Mmorisation Auto
Mmorisation Manuelle
Dplacer
Entrer
Retour
Mmorisation Auto
0%
Service trouv: 0
Canal: -
Dmarrer
Retour
1.2 Mmorisation Manuelle
Vous pouvez spcifier le canal pour une recherche rapide.
Canal
Canal
Mmorisation Auto
Suite
Franais - 36
BN68-01743A-00Fre.indd
36
2008/08/13
11:34:59
Canal
1.3 Modif. les canaux favoris
Vous pouvez modifier vos canaux favoris laide des boutons
Mmorisation Auto
de couleur.
Mmorisation Manuelle
2
Five
Pour annuler, appuyez une nouvelle fois sur le
3
BBC THREE
bouton ENTER/OK.
4
abc1
5
QVC
Tout slectionner: Slectionne toutes les chanes
actuellement affiches.
Slect. tout
Slect. aucun
Aperu
Ne rien slectionner: Dslectionne toutes les
Dplacer
Slect.
Retour
chanes.
Modif. les canaux favoris
Prvisualiser: Affiche les chanes actuellement
slectionnes.
Si le rglage des canaux favoris est termin.
1
BBC TWO
2
BBC THREE
Ajouter
3
abc1
Suite
Franais - 37
BN68-01743A-00Fre.indd
37
2008/08/13
11:35:00
Regarder
Guide Complet
Suivant
Favoris
Quit
Suite
Franais - 38
BN68-01743A-00Fre.indd
38
2008/08/13
11:35:01
Pour voir les informations relatives aux programmes, slectionnez un programme de votre choix
en appuyant sur le bouton /// , puis appuyez sur le bouton INFO.
Les informations telles que le numro de chane, le titre et le temps de fonctionnement
du programme, la barre dtat et un bref rsum du programme surlign seront affiches
dans langle suprieur droit de lcran. Si le rsum est long, sera affich. Appuyez
sur le bouton INFO pour le texte complet du rsum.
Six canaux sont affichs. Pour vous dplacer entre les canaux, passez de lun lautre
en appuyant sur le bouton ou . Pour passer dune page lautre, appuyez sur le
bouton P ou .
2.2 Liste en annexe
Liste en annexe
Si vous crez une liste rgle de visionnage de
Jeudi 22 Avr 15:30 ~ 18:00 Une fois
2 BBC TWO
Animal Park
programmes que vous souhaitez regarder, le canal passera
Jeudi 22 Avr 20:00 ~ 21:00 Une fois
automatiquement au programme programm lheure
2 BBC TWO
The Hairy Bikers
programme mme si vous en regardez un autre.
Appuyez sur le bouton rouge pour ajouter un programme.
Le menu pour ajouter un programme est affich avec
Ajouter prog.
Editer
Sup.
Canal slectionn.
Dplacer
Retour
Appuyez sur les boutons / et ENTER/OK pour
rgler le canal, lheure, la date et la frquence dsirs.
Liste en annexe
Lorsque vous tes satisfait de vos rglages, enregistrez le
Canal 810 Super RTL
programme rgl en appuyant sur le bouton rouge.
Horloge 10 : 15 to - - : - Pour diter le programme rgl, slectionnez un
programme en appuyant sur le bouton ou , puis
Date Thu 03 Mar 2005
appuyez sur le bouton vert. Si ncessaire, slectionnez le
Ajouter.
programme supprimer en appuyant sur le bouton ou
Sauveg.
Annuler
, puis appuyez sur le bouton bleu.
Rgler
Dplacer
Retour
Lorsque vous regardez la tlvision analogique, la
chane DTV rserve ne peut pas tre change. La
chane passe automatiquement sur la chane rserve
uniquement lorsque vous regardez la tlvision
numrique (DTV).
Le rglage des programmes fonctionne uniquement
lorsque la tlvision est allume, pas lorsquelle est
en veille. Pour plus de dtails sur louverture et la
fermeture automatiques de la tlvision, reportez-vous
la page9.
Guide
Guide Now & Next
Guide Complet
Liste en annexe
Par dfaut
Dplacer
: Guide Complet
Entrer
Retour
Guide
Guide Now & Next
Guide Complet
Liste en annexe
Par dfaut
Dplacer
Main./Aprs
: Guide
Complet
Guide Complet
Entrer
Retour
Suite
Franais - 39
BN68-01743A-00Fre.indd
39
2008/08/13
11:35:04
Guide
Guide Now & Next
Guide Complet
Liste en annexe
Par dfaut
Entrer
Retour
Maintenant
Dplacer
: Guide Complet
Regarder
Guide Complet
Suivant
Favoris
Quit
Regarder
Guide Complet
Non
Favoris
Quit
Langue
3. Langue
Ce menu compte 4 sous-menus :
Langue audio, Langue des sous-titres, Langue du tltexte
et Prfrence.
Langue audio
Langue des sous-titres
Langue du tltexte
Prfrence
Dplacer
Entrer
Retour
Suite
Franais - 40
BN68-01743A-00Fre.indd
40
2008/08/13
11:35:05
Langue
3.2 Prfrence
Ce menu compte 6 sous-menus :
Langue audio
Premire Langue Audio, Deuxime Langue Audio, Premire
Langue des sous-titres
Langue de Sous-titres, Deuxime langue de Sous-titres,
Langue du tltexte
Premire Langue Tltexte et Deuxime Langue Tltexte.
Prfrence
Suite
Franais - 41
BN68-01743A-00Fre.indd
41
2008/08/13
11:35:06
4. Configuration
Ce menu compte 8 sous-menus :
Transparence du menu, Verrouillage parental, Sous-titres,
Mode Sous-titres, Texte numrique, Fuseau horaire,
Format Audio et Systme.
4.1 Transparence du menu
Vous pouvez rgler la transparence du menu sur cran.
Appuyez sur le bouton ou pour choisir loption
dsire (Elev, Moyen, Bas ou Opaque), puis appuyez
sur le bouton ENTER/OK.
Configuration
Transparence du menu : Moyen
Verrouillage parental
Sous-titres : Marche
Dplacer
Entrer
Retour
Configuration
Transparence du menu : Moyen
Elev
Verrouillage parental Moyen
Bas
Sous-titres : Marche
Opaque
Mode Sous-titres : Normal
Format Audio : PCM
Dplacer
Entrer
Retour
par lutilisateur.
Mode Sous-titres : Normal
Suite
Franais - 42
BN68-01743A-00Fre.indd
42
2008/08/13
11:35:08
Configuration
4.3 Sous-titres / Mode Sous-titres / Format Audio / Texte
numrique
Transparence du menu : Moyen
raison de la diffrence de vitesse de dcodage entre le hautparleur principal et le rcepteur audio. Dans ce cas, utilisez
Dplacer
Entrer
Retour
la fonction de sourdine interne.
Mme si vous avez slectionn PCM ou Dolby Digital
dans le menu Format Audio, si le format des signaux
en entre est de type PCM ou Dolby Digital, le format
dentre est appliqu, indpendamment de loption
choisie. Si les signaux en entre ne sont pas dun de ces
types, le rglage nest pas appliqu.
Texte numrique: Activer / Dsactiver (Royaume-Uni uniquement)
Si le programme est diffus avec du texte numrique, cette fonction est active.
MHEG (Multimedia and Hypermedia Information Coding Experts Group)?
Norme internationale pour les systmes de codage des donnes utiliss avec le multimdia
et lhypermdia. Niveau suprieur celui du systme MPEG, qui inclut de lhypermdia
liaison de donnes tel que des images fixes, le service de caractres, lanimation,
les fichiers graphiques et vido et les donnes multimdia. MHEG est une technologie
utilisateur dinteraction de dure dutilisation applique divers domaines, dont la vido la
demande (VOD), la tlvision interactive (ITV), le commerce lectronique, la tlformation, la
tlconfrence, les bibliothques numriques et les jeux en rseau.
4.4 Fuseau horaire (Espagne uniquement)
Configuration
Vous pouvez slectionner le fuseau horaire de lendroit o vous
vous trouvez.
Texte numrique
Fuseau Horaire
Ce menu nest activ que si vous avez slectionn un pays
Systme
compatible.
Dplacer
Entrer
Retour
Suite
Franais - 43
BN68-01743A-00Fre.indd
43
2008/08/13
11:35:09
Configuration
4.5 Systme
Information produit
Vous pouvez visualiser les informations relatives votre
produit. Pour toute intervention sur le tlviseur, veuillez
contacter un revendeur Samsung agr.
Dplacer
Entrer
Retour
Appuyez sur le bouton ENTER/OK lorsque Information
Systme
produit est slectionn. Le menu des informations
relatives au produit est slectionn.
Information produit
Informations de signal
Mise niveau du logiciel
signal.
Rinitialiser
Suite
Franais - 44
BN68-01743A-00Fre.indd
44
2008/08/13
11:35:11
Interface commune
Infos sur lapplication
Installation de la carte dinterface commune (CI)
Type: CA
a. Achetez le module CI CAM en vous rendant chez le
Fabricant: Canal Plus
revendeur le plus proche ou par tlphone.
Info: Top Up TV
b. Insrez la CI CARD dans la CAM dans la direction
indique par la flche jusqu ce quelle soit embote.
c. Insrez la CAM avec la CI CARD installe dans la
fente de linterface commune.
Retour
Insrez la CAM dans la direction indique par la
CI Menu
flche, juste au-dessus de lextrmit pour quelle
soit parallle la fente.
d. Vrifiez si une image est visible sur un canal signal
brouill.
Vous pouvez installer la CAM que le tlviseur
soit allum ou teint.
Infos sur lapplication
Contient des informations relatives la CAM insre
Dplacer
Entrer
Quit
dans la fente CI et les affiche.
Appuyez sur le bouton ENTER/OK pour pour afficher les informations relatives votre
application.
CI Menu
Aide lutilisateur slectionner un lment
du menu pris en charge par CAM.
Appuyez sur le bouton ENTER/OK. Les options du menu slectionn saffichent.
Appuyez sur le bouton ou pour slectionner loption dsire, puis appuyez sur le
bouton ENTER/OK.
Slectionnez CI Menu dans le menu PC Card.
Rinitialiser
Rinitialiser
Vous pouvez ramener tous les rglages mmoriss leur
AVERTISSEMENT : Tous les paramtres
de canaux et les prfrences utilisateur
valeur par dfaut..
seront perdus et remplacs par les valeurs
La rinitialisation supprime toutes les informations
dusine. Il nest recommand deffectuer
relatives aux canaux et les prfrences de lutilisateur.
une rinitialisation quen cas de graves
problmes.
Appuyez sur le bouton ENTER/OK lorsque Rinitialiser
est slectionn. Le message Entrer PIN saffiche.
Entrez votre code PIN quatre chiffres en utilisant
Retour
les boutons numriques (0 9). Le message
davertissement saffiche. Tous les rglages seront
effacs en appuyant sur les boutons de couleur les uns
aprs les autres (rouge, vert, jaune et bleu).
Le code PIN par dfaut dun nouveau tlviseur est
rgl sur 0-0-0-0.
Lorsque le code PIN est modifi dans Verrouillage
parental, le code PIN pour rinitialiser change automatiquement.
Au terme de la rinitialisation, il utilise le mode Plug & Play DTV (Mmorisation Auto DTV,
fuseau horaire - en fonction du pays, rglage de lheure) et quitte le mode de tlvision
numrique sans passer au mode de tlvision analogique. (Reportez-vous la page 11)
Franais - 45
BN68-01743A-00Fre.indd
45
2008/08/13
11:35:12
Cble HDMI
Cble HDMI
Cble HDMI
Connexion un systme
Home Theater
TV
Appareil Anynet+ 1
Cble HDMI
Home Theater
Cble HDMI
Appareil Anynet+ 2
Cble HDMI
Appareil Anynet+ 3
Cble HDMI
Cble optique
le son du tlviseur via le systme Home Theater, veillez relier correctement la prise Digital Audio
IN (optique) du systme Home Theater au tlviseur. Il est toutefois impossible dcouter le son de
lenregistreur BD envoy au systme Home Theater via le tlviseur en mode 5.1, car le tlviseur
ne peut produire que du son stro 2 canaux. Reportez-vous la documentation du systme Home
Theater.
Pour tablir une connexion entre des appareils Anynet+, employez des cbles HDMI.
Anynet+ fonctionne si lappareil AV compatible est en mode Veille (Standby) ou en marche (On).
Anynet+ prend en charge jusqu 8 appareils AV.
Franais - 46
BN68-01743A-00Fre.indd
46
2008/08/13
11:35:13
Configuration dAnynet+
Les fonctions dAnynet+ emploient les rglages suivants.
Utilisation de la fonction Anynet+
1
P1
Voir tlvision
TV
Slection appareil
Enregistrer
Menu du Priphrique
Fonctionnement priph.
Rcepteur :Arrt
Configuration
Dplacer
Quitter
Entrer
Configuration
Anynet+ (HDMI-CEC)
: OffArrt
Arrt automatique
: OffMarche
Rech connects
Dplacer
Entrer
Retour
DVDR2
appuyez sur le bouton ENTER/OK. Vous passez ainsi lappareil
DVD1
Enregistrer
slectionn.
DVD2
Menu du Priphrique
Si lappareil dsir est introuvable, appuyez sur le bouton ou
Fonctionnement priph.
pour slectionner Rech connects, puis appuyez sur le bouton
Rcepteur :Arrt
ENTER/OK.
Configuration
BN68-01743A-00Fre.indd
47
2008/08/13
11:35:14
Menu Anynet+
Le menu Anynet+ varie selon le type et ltat des appareils Anynet+ connects au tlviseur.
Menu Anynet+
Description
Voir tlvision
Slection appareil
Enregistrer
Menu du Priphrique
Fonctionnement priph.
Rcepteur
Configuration
Appareil Anynet+
Mode de fonctionnement
Boutons disponibles
Touches numriques
Aprs le basculement vers cet
////ENTER
appareil, lorsque son menu
Touches colores
saffiche lcran.
Bouton EXIT
(Recherche vers larrire)
Aprs le basculement vers
(Recherche vers lavant)
lappareil, pendant la lecture dun
(Arrt)
fichier
(Lecture/Pause)
Aprs le basculement vers
lappareil, lorsque vous regardez Bouton CH /
un programme tlvis
Bouton VOL +/Lorsque le rcepteur est activ
Bouton MUTE
La fonction Anynet+ nest utilisable que quand la tlcommande est rgle en mode TV.
Le bouton REC ne fonctionne que lorsque lappareil est dans un tat o lenregistrement est possible.
impossible de commander les appareils Anynet+ laide des boutons sur le ct du tlviseur.
IlLesestappareils
Anynet+ ne peuvent tre commands quau moyen de la tlcommande du tlviseur.
se peut que la tlcommande du tlviseur ne fonctionne pas dans certaines situations. Dans ce
Ilcas,
slectionnez de nouveau lappareil Anynet+.
Les fonctions dAnynet+ ne peuvent pas commander des produits dautres fabricants.
En mode Anynet+, les boutons de couleur peuvent ne pas fonctionner correctement.
Les oprations et peuvent varier en fonction de lappareil.
Enregistrement
Vous pouvez enregistrer un programme tlvis laide dun enregistreur.
Appuyez sur le bouton REC.
Lenregistrement dbute. Le systme denregistrement compatible Anynet+ doit toutefois tre connect.
Le programme tlvis actuel est enregistr lorsque vous regardez la tlvision. Si vous regardez
une vido provenant dun autre appareil, cest cette vido qui est enregistre.
Vous pouvez galement effectuer un enregistrement en slectionnant Record aprs avoir
appuy sur le bouton Anynet+.
Avant denregistrer, vrifiez la connexion de la prise dantenne au priphrique denregistrement.
Pour la connexion de lantenne au priphrique denregistrement, reportez-vous au manuel de
lutilisateur de ce dernier.
Franais - 48
BN68-01743A-00Fre.indd
48
2008/08/13
11:35:14
Slection appareil
2 Slectionnez Marche en appuyant sur le bouton ou , puis appuyez sur le
Enregistrer
bouton ENTER/OK.
Menu du Priphrique
Le son est dsormais mis via le rcepteur.
Fonctionnement priph.
3 Appuyez sur le bouton EXIT pour quitter le menu.
Rcepteur :Arrt
Lorsque le rcepteur est activ, vous pouvez couter le son du tlviseur via
Configuration
le rcepteur 2 canaux.
Dplacer
Entrer
Si le rcepteur nest destin qu un systme Home Theater (et ne prend en
Quit
charge que laudio), il se peut quil ne figure pas dans la liste des appareils.
Le rcepteur ne peut fonctionner que sil est connect correctement la prise optique du tlviseur.
Si vous utilisez du contenu confront un problme de droits dauteur, il se peut que lcoute via le
rcepteur ne fonctionne pas correctement.
Lors de lcoute via le rcepteur, des restrictions sappliquent lutilisation des menus lis
auxfonctions PIP et audio.
Solution
Je veux dmarrer Anynet+.
Connexion un appareil
Anynet+ apparat lcran.
La lecture ne dmarre pas
sur lappareil Anynet+.
Lappareil connect nest
pas affich.
Vous ne pouvez pas utiliser la fonction de lecture lorsque Plug & Play est en cours.
Le programme TV ne
senregistre pas.
Le son du tlviseur ne sort
pas via le rcepteur.
BN68-01743A-00Fre.indd
49
2008/08/13
11:35:14
1 TV/DTV
Permet de quitter laffichage tltexte (en fonction du modle)
2
(index)
Permet dafficher la page dindex du tltexte (sommaire).
3
(teletext on/mix)
Permet dactiver le mode Tltexte aprs avoir choisi le canal
diffusant le service tltexte. Appuyez deux fois sur ce bouton pour
superposer le tltexte lmission diffuse.
4
(size)
Permet dafficher la moiti suprieure de lcran en caractres
deux fois plus grands. Appuyez nouveau sur ce bouton pour
afficher la moiti infrieure de lcran.
Appuyez nouveau pour rtablir le mode daffichage normal.
5
(mode)
Permet de slectionner le mode Tltexte (LIST/FLOF).
Si vous appuyez sur ce bouton en mode LISTE, vous accdez au
mode denregistrement de liste.
Dans ce mode, vous pouvez enregistrer une page tltexte dans
une liste laide du bouton
(store).
6
(sub-page)
Permet dafficher une page secondaire.
7
(page up)
Permet dafficher la page tltexte suivante.
8
(page down)
Permet dafficher la page tltexte prcdente.
9
(cancel)
Permet dafficher le programme lors de la recherche dune page.
0
(reveal)
Permet dafficher le texte masqu (par exemple les rponses dun jeu). Appuyez nouveau sur ce
bouton pour rtablir le mode daffichage normal.
! Boutons de couleur (rouge/vert/jaune/bleu)
Si la socit mettrice utilise le systme FASTEXT, les diffrents sujets traits dans la page tltexte
disposent dun code couleur et peuvent tre slectionns laide des boutons de couleur de la
tlcommande. Appuyez sur le bouton correspondant la fonctionnalit requise. La page saffiche
ainsi que dautres informations en couleur pouvant tre slectionnes de la mme manire.
Pour afficher la page prcdente ou la page suivante, appuyez sur le bouton de couleur
correspondant.
@
(hold)
Permet de bloquer laffichage sur une page prcise, si celleci est relie plusieurs pages secondaires qui saffichent
automatiquement lune aprs lautre. Pour reprendre laffichage
des autres pages, appuyez nouveau sur ce bouton.
#
(store)
Permet de mmoriser les pages de tltexte.
pouvez changer de page tltexte en appuyant sur les
Vous
boutons numriques de la tlcommande.
Suite
Franais - 50
BN68-01743A-00Fre.indd
50
2008/08/13
11:35:17
Sommaire
Numro de la page slectionne
Identit du canal metteur
Numro de la page actuelle ou indications de recherche
Date et heure
Texte
Informations sur ltat
Informations FASTEXT
1
2
Installez le dispositif de fixation murale avec un couple de serrage de 15 kg/cm ou moins. Certaines
pices peuvent tre endommages si le couple est suprieur.
Le kit daccessoires contient un Support un Anneau [] en vue dinstaller un dispositif dune
marque autre que Samsung TV. (Cas B)
Franais - 51
BN68-01743A-00Fre.indd
51
2008/08/13
11:35:18
Famille de produit
TELEVISEUR LCD
TELEVISEUR
ECRAN A
PLASMA
pouce
Caract. VESA (A * B)
Vis standard
23 ~ 26
200 * 100
M4
32 ~ 40
200 * 200
M6
46 ~ 52
600 * 400
57
700 * 400
(Pas VESA)
57 ~ 70
800 * 400
80 ~
1400 * 800
42 ~ 50
600 * 400
55 ~ 70
800 * 400
63
Pas VESA
80 ~
1400 * 800
Quantit
4
M8
4
M8
6
4
avons fourni les dimensions standard pour tous les kits de fixation murale, comme indiqu dans
Nous
le tableau ci-dessus.
manuel dinstallation dtaill et toutes les pices ncessaires au montage sont fournis avec le kit
Un
de fixation mural.
pas de vis plus longues que la dimension standard car elles pourraient endommager
Nutilisez
lintrieur du tlviseur.
les fixations murales non conformes aux caractristiques des vis VESA standard, la longueur
Pour
des vis peut varier, selon leurs caractristiques.
pas de vis non conformes aux caractristiques des vis VESA standard. Ne serrez pas
Nutilisez
trop les vis : cela pourrait endommager le produit ou provoquer sa chute, entranant des blessures
corporelles. Samsung ne peut tre tenue responsable de ce type daccident.
ne peut tre tenue responsable de tout dommage au produit ou toute blessure corporelle
Samsung
dans le cas de lutilisation dune fixation murale non-VESA ou non spcifi, ni si lutilisateur ne suit
pas les instructions dinstallation du produit.
modles 57 et 63 ne sont pas conformes aux caractristiques VESA. Vous devez par
Nos
consquent utiliser notre kit de fixation mural appropri pour ce modle.
Lors du montage, linclinaison du tlviseur ne doit pas dpasser 15 degrs.
N
installez pas votre kit de montage mural lorsque votre tlviseur est en fonctionnement.
Une
blessure par choc lectrique pourrait en rsulter.
Franais - 52
BN68-01743A-00Fre.indd
52
2008/08/13
11:35:18
Rglage de la tlcommande
Une fois correctement rgle, votre tlcommande peut fonctionner selon cinq modes diffrents:
TV, magntoscope, cble, lecteur DVD ou dcodeur. En appuyant sur le bouton correspondant de
la tlcommande, vous pouvez passer dun mode lautre et commander lappareil de votre choix.
La tlcommande peut ne pas tre compatible avec certains magntoscopes, lecteurs DVD, botes
de jonction et botiers dcodeurs.
Rglage de la tlcommande pour piloter le magntoscope
1 Eteignez votre magntoscope.
2 Appuyez sur le bouton VCR de la tlcommande de votre tlviseur.
3 Appuyez sur le bouton SET de la tlcommande de votre tlviseur.
4 A laide des touches numriques de votre tlcommande, saisissez
les trois chiffres du code magntoscope figurant sur la liste de
la page 55 de ce manuel correspondant la marque de votre
magntoscope. Veillez saisir tous les chiffres du code, mme si le
premier chiffre est un 0. (Lorsque plusieurs codes figurent dans la
liste, essayez dabord le premier.)
5 Appuyez sur le bouton POWER de la tlcommande. Votre
magntoscope doitse mettre en marche si votre tlcommande est
correctement rgle.
Si votre magntoscope ne sallume pas une fois le rglage termin,
rptez les tapes 2, 3 et 4, et essayez lun des autres codes de la liste
correspondant votre marque de magntoscope. Si aucun autre code
nest rpertori, essayez chaque code de magntoscope, de 000 080.
Remarque concernant lutilisation des modes de la tlcommande:
Magntoscope
Lorsque votre tlcommande est en mode VCR, il est toujours
possible de contrler le volume du tlviseur laide des boutons de la
tlcommande.
Franais - 53
BN68-01743A-00Fre.indd
53
Suite
2008/08/13
11:35:20
Franais - 54
BN68-01743A-00Fre.indd
54
Suite
2008/08/13
11:35:21
Codes de tlcommande
Magntoscope
Marque
SAMSUNG
ADMIRAL
AIWA
AKAI
AUDIO DYNAMICS
BELL&HOWELL
BROKSONIC
CANDLE
CANON
CITIZEN
COLORTYME
CRAIG
CURTIS MATHES
DAEWOO
DB
DIMENSIA
DYNATECH
ELECTROHOME
EMERSON
FISHER
FUNAI
GENERAL ELECTRIC
GO VIDEO
LG(Goldstar)
HARMAN KARDON
HITACHI
INSTANT REPLAY
JC PENNEY
JCL
KENWOOD
KLH
LIOYD
LOGIK
LXI
JVC
MAGNAVOX
MARANTZ
MARTA
KONIA
ORION
MEI
MEMOREX
MGA
MIDLAND
MINOLTA
Code
000 001 002 003 004 005 077 078 079
020
025
004 027 032
007 026
018
022
002 003 006 008 015 055
021 056
002 003 006 008 015 055
007
002 024
002 007 008 017 021 025 056 064 066
003 010 011 012 013 014 015 016
007 026
017
025
034
001 003 006 021 022 025 030 032 034
040 047 050 052 060 063 065 066 067
069 073
018 024 028 029 048 051 061
025
002 005 017 021 056
002
006 007 008 009 010
007
019 025 041 042 074
021
002 007 018 019 021 026 037 041
054 056
007 008 018 021 026 037
007 008 018 026 037
070
025
038
025
081 082 083
021 056 059
007 008 018 021 026 037 062
006
036
073 074 075 076
021
006 021 024 025
034
005
019 041 075
Marque
MITSUBISHI
MONTGOMERY WARD
MTC
MULTITECH
NEC
OPTIMUS
PANASONIC
PENTAX
PENTEX RESEARCH+
PHILCO
PHILIPS
PIONEER
PORTLAND
PROSCAN
QUARTZ
QUASAR
RADIO SHACK/
REALISTIC
RCA
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHIMTOM
SIGNATURE
SONY
SYLVANIA
SYMPHONIC
TANDY
TASHIKA
TATUNG
TEAC
TECHNICS
TEKNIKA
TMK
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
YAMAHA
ZENITH
Code
019 034 041 046
020
002 025
002 005 025 038
007 008 018 026 037 062 064
020
021 056 071 072
019 041 075
008
021 056 059
021 080
019 026 039 053
015 049 055
017
018
021 056
006 018 020 021 024 025 029 034
048 056
002 017 019 021 035 041 043 057
068 076
026
018 024
003 047 052 067
006 018 019 024 028 029 041 048 051
020 034 045 015
027 033 038 058
025
027 033 044
021 025 056 059
025
018 025
006
037
025 037 068
021
006 021 025 031
066
003 019 029 051 052
002 006
002
007 026
026
007 026
002
002 003 006 019 020 021 024 025 034
038 041
007 008 018 026 037
023 027 033
Suite
Franais - 55
BN68-01743A-00Fre.indd
55
2008/08/13
11:35:22
Code
000 001 002 003 004 005 006 007
041
003 024 031
025 030
038 039
025 030
019 023 028
026
003 022 027 037 044
019 021 023 028
004 018 020 044
014 022 040
003
Marque
REGENCY
SA
SCIENTIFIC ATLAN
SPRUCER
STARGATE 2000
SYLVANIA
TEXSCAN
TOCOM
UNIVERSAL
VIEWSTAR
WARNER AMEX
ZENITH
Code
015 023
042 043
042 043
022
036
016
016
032
033 034
019 021 023 028
046
017 029 035 037 045
Code
000 001 002 008 013
000 004 008 013
000 003 008 013
BOITIER DECODEUR
Marque
ALPHASTAR
ANAM
CHANNEL MASTER
CROSSDIGITAL
CHAPARRAL
DIRECT TV
DAEWOO
DISH NETWORK SYSTEM
DISHPRO
DRAKE
DX ANTENNA
ECHOSTAR
EXPRESSVU
GOI
GE
GENERAL INSTRUMENT
HTS
HOME CABLE
HITACHI
HUGHES NETWORK
IQ
IQ PRISM
JANEIL
JERROID
JVC
Code
023
043
018 034
019
035
015 016 017 019 022 045 060
061 062 065 066 067 068
074
069 070
069
018 024 032
027
025 069 070 071
069
069
065
046 047 048 063 064
069
056
022
015 017
020
020
059
063
069 070
Marque
LG(Goldstar)
MAGNAVOX
MEMOREX
MOTOROLA
MACOM
MITSUBISHI
NEXT LEVEL
PHILIPS
PRIMESTAR
PANASONIC
PAYSAT
PROSCAN
RCA
RADIOSHACK
REALISTIC
STS
STAR TRAK
SKY
SKY LIFE
SHACK
STAR CHOICE
SONY
TOSHIBA
ULTIMATE TV
UNIDEN
ZENITH
Code
044 073
016 021 036 038 039 040 041 042
016
064
018
015
047 048 064
015 016 017 021 033 036 038 039
040 041 042 067
046 049 050 063
058 059 061 062
016
065 066
051 052 053 065 066
064
057
020 027
026
031
005 006 007
064
064
054 060
015 017 028 029 030 072
060 066
016 021 037 055 056 057
024 031 068
Suite
Franais - 56
BN68-01743A-00Fre.indd
56
2008/08/13
11:35:22
Code
000 001 002
003 004
005 006
007 008 009 010 011
012
013
Produit
Home Theater VCR COMBO
HDD Record COMBO
TWIN TRAY COMBO
STB DVD COMBO
DVD Receiver
AV Receiver
Code
014 015 016
017
018
019
020
021
LECTEUR DVD
Marque
ANAM
AUDIOVOX
AUDIOLOGIC
ANABA
APEX DIGITAL
AIWA
BROKSONIC
BLAUPUNKT
B&K
CURTIS MATHES
CYBER HOME
CLARION
CIRRUS
CINEVISION
DAEWOO
DENON
FARENHEIT
FISHER
GPX
GO VIDEO
GE
GREENHILL
HITACHI
HITEKER
HOYO
HARMAN KARDON
IRT
INTEGRA
JBL
JVC
JATON
KENWOOD
KISS
KONKA
KLH
LG(Goldstar)
LOEWE
LASONIC
MOBILE AUTHORITY
MEMOREX
MALATA
MAGNAVOX
MINTEK
MONYKA
Code
030
075
085
072
070 071 074 086 083 084 088
111 112
114
062
074
122 123
027
065 077 078 079 082
080 125
081
095
066
146
067 068
090
060
061 089 133 135
069 074
074
064 113
071
073
091 110
089
092
091
022 033 115 116
073
051 108 109
073
059 100 106 107
074 075
025 031
057
058
054
055
056
076 093
074 094
073
Marque
NORCENT
NEXT BASE
NEC
NANTAUS
NESA
OPTOMEDIA ELECTRONICS
OPTIVIEW
ONKYO
PHILCO
PRINCETON
PROSCAN
PANASONIC
PHILIPS
ROTEL
RIO
RCA
RAITE
ROWA
SAMPO
SONY
SHERWOOD
SVA
SYLVANIA
SHARP
SANSUI
SANYO
SHINSONIC
SANYO
THOMSON
TOSHIBA
TECHNICS
TVIEW
TOKAI
TEAC
TECHWOOD
TREDEX
URBAN CONCEPTS
VENTURER
VOCOPRO
YAMAHA
YAMAKAWA
XWAVE
ZENITH
Code
048 049 050
052
053
144
074
105
072
076 092 119
044 045
046 047
023
024 034 124 134 136 137 138
036 076
117 118
120
023 035 074 075 131 132
073
038
104
026 029 126 127 128 129
130 141
039 041
042
043 093
140
062
062
094
090
145
028 062 076
139
072
073
096
097
098 099 101
076
075
102
032 063
040 073
103
076 121
Franais - 57
BN68-01743A-00Fre.indd
57
2008/08/13
11:35:22
Dpannage
Avant de contacter le service aprs-vente Samsung, effectuez les vrifications lmentaires
suivantes.Si vous ne pouvez pas rsoudre le problme en suivant les instructions ci-dessous,
notez le modle et le numro de srie de votre tlviseur et contactez votre revendeur local.
Aucune image ou aucun son
Vrifiez que le cordon dalimentation est branch une prise secteur.
Vrifiez que vous avez appuy sur le bouton (Mise hors/sous tension) de la faade du tlviseur
ou sur le bouton POWER de la tlcommande.
Vrifiez les paramtres de contraste et de luminosit.
Vrifiez le volume.
Vrifiez si Silence int. est rgl sur Marche.
Image normale, mais aucun son
Vrifiez le volume.
Vrifiez si le bouton MUTE de la tlcommande a t actionn.
Aucune image ou image en noir et blanc
Rglez les paramtres de couleur.
Vrifiez que le systme dmission slectionn est correct.
Interfrence du son et de limage
Essayez didentifier lappareil lectrique affectant le tlviseur et dplacez-le.
Branchez le tlviseur sur une autre prise secteur.
Image neigeuse ou floue, son altr
Vrifiez lorientation, lemplacement et les branchements de votre antenne.
Cette interfrence est souvent due lutilisation dune antenne intrieure.Dysfonctionnements de la tlcommande
Remplacez les piles de la tlcommande.
Nettoyez la partie suprieure de la tlcommande (fentre de transmission).
Vrifiez que les ples + et - des piles sont orients correctement.
Vrifiez si les piles ne sont pas dcharges.
Lcran est noir et le tmoin dalimentation clignote intervalle rgulier.
Sur votre ordinateur, allez sur: Alimentation, Cble de signal.
Le mode de gestion dalimentation est activ.
Dplacez la souris de lordinateur ou appuyez sur une touche du clavier.
Sur votre appareil, allez sur(STB, DVD, etc): Alimentation, Cble de signal.
Le mode de gestion dalimentation est activ.
Appuyez sur le bouton Source du panneau ou de la tlcommande.
Allumez et teignez la tlvision.
Limage endommage apparat dans le coin de lcran.
Si Scan uniquement est slectionn dans certains priphriques externes, limage endommage
peut apparaitre dans le coin de lcran. Ce problme est provoqu par les priphriques externes et
non par le tlviseur.
Franais - 58
BN68-01743A-00Fre.indd
58
2008/08/13
11:35:26
Caractristiques
Les descriptions et caractristiques fournies dans ce manuel sont donnes titre indicatif
seulement et sont susceptibles dtre modifies sans pravis.
Nom du modle
PS42A417
42 pouces
Rsolution PC
1024 x 768 @ 60 Hz
Son (Sortie)
10 W x 2
Dimensions (LxHxP)
Corps
Avec pied
1055 x 700 x 95 mm
1055 x 759 x 316 mm
Poids
Corps
Avec pied
31 kg
34 kg
Considrations
environnementales
Temprature de fonctionnement
Humidit au cours du fonctionnement
Temprature de stockage
Humidit sur le lieu de stockage
10 C 40 C (50 F 104 F)
10 % 80 %, sans condensation
-20 C 45 C (-4 F 113 F)
5 % 95 %, sans condensation
Franais - 59
BN68-01743A-00Fre.indd
59
2008/08/13
11:35:27
BN68-01743A-00Fre.indd
60
2008/08/13
11:35:27
Benutzerhinweise
Einbrennen von Standbildern
Zeigen Sie Standbilder (z.B. bei einem Videospiel oder bei Anschluss eines PC an diesen
Plasmamonitor) niemals lnger als 2 Stunden auf dem Plasmabildschirm an, da das Bild auf diese
Weise einbrennen kann. Das Einbrennen von Standbildern wird auch als Bildkonservierung
bezeichnet. Sie knnen das Einbrennen vermeiden, indem Sie die Helligkeit und den Kontrast des
Monitors beim Anzeigen von Standbildern verringern.
Hhe
Um normalen Betrieb zu gewhrleisten, muss der Plasmabildschirm in einer Hhe unter 2000m
aufgestellt werden. Der Betrieb des Monitors wird mglicherweise gestrt, wenn er in mehr als
2000m Hhe betrieben wird. Sie drfen den Plasmabildschirm deshalb nicht in einer Hhe von ber
2000m aufstellen und betreiben.
Wrmeentwicklung auf der Oberseite des Plasmabildschirms
Die Oberseite des Produkts kann nach lngerem Betrieb warm werden, da die Wrme aus dem
Monitor ber die Entlftungsffnung im oberen Teil des Gerts abgefhrt wird. Dies ist normal und
weist nicht auf einen Defekt oder eine Fehlfunktion des Gerts hin. Allerdings sollten Kinder von dem
oberen Teil des Gerts ferngehalten werden.
Das Gert verursacht ein knackendes Gerusch.
Ein knackendes Gerusch entsteht, wenn das Gertematerial sich aufgrund einer nderung der
Umgebung, wie z.B. Temperaturschwankungen oder nderung der Luftfeuchtigkeit, zusammenzieht
oder ausdehnt. Das ist normal und stellt keinen Defekt des Gerts dar.
Pixelfehler
Der Plasmabildschirm besitzt eine Bildflche mit 1.230.000 (bei SD-Auflsung) bis 3.150.000
(bei HD-Auflsung) Pixeln, fr dessen Herstellung hoch entwickelte Technologie eingesetzt wird.
Allerdings knnen ein paar zu helle oder zu dunkle Pixel auf der Bildflche zu sehen sein. Diese
Pixelfehler haben keinen Einfluss auf die Gerteleistung.
Vermeiden Sie den Betrieb des Plasmabildschirms bei Temperaturen unter 5C.
Ein Standbild, dass zu lange angezeigt wird, kann zu einer bleibenden Beschdigung des
Plasmabildschirms fhren
Der Betrieb des Plasmafernsehers im Format 4:3 ber einen lngeren Zeitraum
kann links, rechts und in der Mitte des Monitors Spuren der Bildrnder
hinterlassen, die durch die unterschiedliche Lichtemission auf dem Bildschirm
verursacht werden. Das Wiedergeben einer DVD oder der Betrieb einer
Spielkonsole kann auf dem Bildschirm zu hnlichen Effekten fhren. Schden,
die durch die o.g. Effekte verursacht wurden, unterliegen nicht der Garantie.
Nachbilder auf dem Monitor
Das Anzeigen von Standbildern von Videospielen und PC-Anwendungen ber einen bestimmten
Zeitraum kann zu partiellen Nachbildern fhren. Um diesen Effekt zu verhindern, verringern Sie
Helligkeit und Kontrast, wenn Sie Standbilder anzeigen mchten.
Garantie
Durch diese Garantie nicht abgedeckt sind Schden, die durch Einbrennen von Bildern entstehen.
Das Einbrennen von Bildern wird von der Garantie nicht abgedeckt.
Installieren
Wenden Sie sich an den autorisierten Kundendienst, wenn das Gert an einem Ort mit hoher
Konzentration an Staubpartikeln, auergewhnlich hoher oder geringer Raumtemperatur,
extrem hoher Luftfeuchtigkeit, in unmittelbarer Nhe zu chemischen Lsungsmitteln oder fr den
Dauerbetrieb, z.B. auf Bahn- oder Flughfen, aufgestellt werden soll. Eine nicht fachgerechte
Aufstellung kann zu schweren Schden am Gert fhren.
Funktionen fr Digitalfernsehen (DVB) funktionieren nur in Lndern und Regionen, in denen digitale
DVB-T-Signale (MPEG2) terrestrisch gesendet werden. Fragen Sie bei Ihrem rtlichen Hndler
nach, ob Sie dort DVB-T empfangen knnen. Zwar hlt dieses Fernsehgert die Vorgaben der DVBT-Spezifikation ein, aber es kann nicht garantiert werden, dass die Kompatibilitt mit zuknftigen
digitalen terrestrischen DVB-T-Signalen gewahrt bleibt. Verschiedene Funktionen sind mglicherweise
in manchen Lndern nicht verfgbar.
Deutsch -
BN68-01743A_00Ger.indd
2008/08/13
11:45:03
Inhalt
Allgemeine Informationen
Funktionsbeschreibung
Benutzerhinweise............................................. 2
Lieferumfang.................................................... 4
Verwenden des Standfues............................. 4
Systemsteuerung............................................. 5
Anschlussfeld................................................... 6
Fernbedienung................................................. 8
Zeitfunktionen................................................ 24
Sprache / Blaues Bild / Melodie / Lichteffekt /
Energiesparmod. / HDMI-Schwarzwert.......... 25
Spielemodus verwenden................................ 26
Verstellbare Wandhalterung (gesondert
lieferbar)......................................................... 27
Bild-im-Bild-Funktion (PIP) verwenden.......... 28
Einbrennschutz.............................................. 29
Funktion
Kanalsteuerung
Automatisches Speichern von Kanlen......... 13
Manuelles Speichern von Kanlen................ 14
Sender hinzufgen/sperren............................ 15
Sortieren der gespeicherten Kanle.............. 16
Kanle benennen........................................... 16
Senderfeinabstimmung durchfhren.............. 17
LNA (rauscharmer Verstrker)....................... 17
Bildeinstellungen
Bildstandard ndern....................................... 18
Bildeinstellungen anpassen........................... 18
Konfigurieren detaillierter Bildeinstellungen... 19
uswhlen des Bildformats............................ 20
Auswhlen des Bildschirmmodus.................. 20
Digitale RM / Aktive Farbe / DNIe /
Movie Plus..................................................... 21
Aktuelles Bild einfrieren................................. 21
PC-Anzeige
Einrichten der PC-Software
(unter Windows XP)....................................... 30
Eingangsmodus (PC)..................................... 31
Einstellungen fr PC vornehmen................... 32
Einstellen des Heimkino-PC.......................... 33
Deutsch
Informationen zu Anynet+
Was ist Anynet+?........................................... 46
Anschlieen von Anynet+-Gerten................ 46
Einrichten von Anynet+.................................. 47
Suchen von Anynet+-Gerten und
Umschalten zwischen diesen Gerten........... 47
Aufnehmen..................................................... 48
Tonwiedergabe mit einem Receiver............... 49
Prfen Sie Folgendes, bevor Sie sich an
den Service wenden...................................... 49
Anhang
Toneinstellungen
Audiofunktionen............................................. 22
Auswhlen des Tonmodus (modellabhngig)... 23
Videotext-Funktion (modellabhngig)............ 50
Vorbereitung fr die Befestigung der
Wandhalterung an der Wand......................... 51
Spezifikation (VESA) der Wandhalterung...... 52
Einrichten der Fernbedienung........................ 53
Montieren des Standfues (modellabhngig).... 58
Problembehandlung....................................... 58
Technische Daten.......................................... 59
Wichtig
Hinweis
Symbole
Tastendruck
Deutsch -
BN68-01743A_00Ger.indd
2008/08/13
11:45:04
Lieferumfang
Netzkabel
Bedienungsanleitung
Fernbedienung/
AAA-Batterien
Garantiekarte/
Sicherheitshinweise
(Nicht berall
verfgbar)
Ferritkern fr
Netzkabel
Reinigungstuch
Ferritkern fr
S-Video
Ferritkern fr
Kopfhrerkabel
Separat erhltlich
S-Videokabel
Antennenkabel
Komponentenkabel
Audiokabel
Videokabel
PC-Kabel
SCART-Kabel
PC-Audio-Kabel
HDMI-Kabel
HDMI/DVI-Kabel
getragen werden. Um
Beschdigungen zu vermeiden,
legen Sie den Plasmafernseher
nie auf den Fuboden. Der
Plasmabildschirm muss sich
immer in aufrechter Position
befinden.
Der Plasmabildschirm kann um 20
Grad nach recht und links gedreht werden.
-20 ~ 20
Deutsch -
BN68-01743A_00Ger.indd
2008/08/13
11:45:06
Systemsteuerung
Vorderseite (oder Seitenverkleidung)
Eingabe
Im Bildschirmmen knnen Sie diese Taste
wie die Eingabetaste auf der Fernbedienung
verwenden.
2 MENU
Drcken Sie diese Taste, um die Funktionen
des Fernsehgerts in einem Bildschirmmen
anzuzeigen.
(POWER)-Taste
Drcken Sie diese Taste, um das Fernsehgert
ein- und auszuschalten.
3 y+
Drcken, um die Lautstrke zu erhhen oder
zu verringern.
Whlen Sie im Bildschirmmen die y+
Schaltflchen, so wie Sie die und Tasten
auf der Fernbedienung verwenden.
4
C/P.
Kanal wechseln. Whlen Sie im
Bildschirmmen die
C/P.
Schaltflchen, so wie Sie die und Tasten
auf der Fernbedienung verwenden.
Stromversorgungsanzeige
Beim Einschalten des Fernsehgerts blinkt
die Betriebsanzeige kurz und erlischt
anschlieend. Im Standbymodus leuchtet die
Anzeige permanent.
Fernbedienungssensor
Richten Sie die Fernbedienung auf diesen
Sensor am Fernsehgert.
7 Lautsprecher
Deutsch -
BN68-01743A_00Ger.indd
2008/08/13
11:45:07
Anschlussfeld
Seitenverkleidung
1
2
oder
3 Kopfhrerbuchse
Wenn Sie beim Fernsehen andere Personen
im Zimmer nicht stren mchten, knnen Sie
Kopfhrer an das Fernsehgert anschlieen.
Das Verwenden von Kopfhrern bei hoher
Lautstrke ber einen lngeren Zeitraum
kann zu Hrschden fhren.
Rckseite
1
oder
Kabelfernsehen
Netzwerk
8
oder
Sie sicher, dass der Fernseher und alle angeschlossenen Gerte ausgeschaltet sind, ehe
Stellen
Sie weitere Gerte anschlieen.
Achten Sie beim Anschlieen eines externen Gerts auf die Farbcodierung: Stecker und Buchse
mssen die gleiche Farbe aufweisen.
Fortsetzung...
Deutsch -
BN68-01743A_00Ger.indd
2008/08/13
11:45:11
1 Netzanschluss
Zum Anschlieen des mitgelieferten
Netzkabels.
2 Externe Audiogerte anschlieen
Schlieen Sie die Cinch-Audiosignale des
Fernsehgerts an eine externe Quelle an, z.B.
an ein Audiogert.
3 EXT 1, EXT 2
Ein- und Ausgnge fr externe Gerte wie z.B.
Videorecorder, DVD-Player, Spielekonsolen
oder Video-Disc-Player.
Anschlussmglichkeiten
Anschluss
EXT 1
EXT 2
Eingang
Ausgang
Video Audio (L/R) RGB Video + Audio (L/R)
Nur TV- oder DTV
Ausgang verfgbar.
4 COMPONENT IN
Audio (AUDIO L/R) und Videoeingnge (Y/PB/
PR) fr Komponentenanschluss.
5 DIGITAL AUDIO OUT (OPTICAL)
Ausgang an ein digitales Audiogert
anschlieen.
6 SERVICE
Anschluss fr Servicezwecke
Verbinden Sie das Fernsehgert ber
den seriellen Anschluss mit der elektrisch
angetriebenen Wandhalterung, wenn Sie
den Betrachtungswinkel des Fernsehgerts
mit der Fernbedienung einstellen mchten.
7 PC IN / AUDIO
Zum Anschlieen an den Video- und
Audioausgang eines Computers.
8 Steckplatz fr gemeinsame Schnittstelle
IAnschlieen einer CI-Karte (Gemeinsame
Schnittstelle) (Informationen hierzu finden Sie
auf Seite 45.)
Ohne eingelegte CI-Karte zeigt das
Fernsehgert auf einigen Kanlen ein
gestrtes Signal an.
Die Verbindungsinformationen mit
Telefonnummer, Kennung der CI-Karte,
Hostkennung und anderen Angaben wird
nach ungefhr 2 bis 3 Minuten angezeigt.
Wenn eine Fehlermeldung angezeigt
wird, wenden Sie sich bitte an Ihren
Dienstanbieter.
Wenn die Kanalinformationskonfigurati
on abgeschlossen ist, wird die Meldung
Aktualisierung abgeschlossen angezeigt.
Dies bedeutet, dass die Kanalliste jetzt
aktualisiert ist.
Die Richtung, in der Sie die Karte einlegen
mssen, ist darauf mit einem Pfeil
markiert.
9 HDMI IN 1, HDMI IN 2
Zum Anschlieen an die HDMI-Buchse von
Gerten mit HDMI-Ausgang Diese Eingnge
knnen als DVI-Anschluss mit separaten
analogen Audioeingngen verwendet
werden. Fr diese Art des Anschlusses
wird ein optionales HDMI/DVI-Kabel
bentigt. Bei Verwendung des optionalen
HDMI/DVi-Adapters werden die analogen
DVI-Audioeingnge am Fernsehgert
fr den Empfang des rechten und linken
Audiosignals vom DVI-Gert verwendet.
(Nicht fr PC geeignet)
Wenn Sie dieses Gert ber HDMI oder
DVI an eine Set-Top-Box, einen DVD-Player
oder eine Spielekonsole usw. anschlieen,
mssen Sie sicherstellen, dass es gem
nachfolgender Tabelle auf den richtigen
Videoausgabemodus eingestellt ist.
Tun Sie dies nicht, so kann es zu einer
Verschlechterung der Bildqualitt, zu einer
Verzerrung der Anzeige oder dazu kommen,
dass gar kein Bild angezeigt wird.
Versuchen Sie nicht, den HDMI/DVIAnschluss mit der Grafikkarte eines PCs
oder Laptops zu verbinden. (In diesem Fall
wrde ein leerer Bildschirm angezeigt)
DVI IN (HDMI 2) AUDIO L/R
DVI-Audioausgnge fr externe Gerte.
0 Antenneneingang
75-Koaxialanschluss fr Antenne/
Kabelanschluss.
Untersttzte Modi fr HDMI/DVI und
Komponenteneingang
HDMI/DVI 50 Hz
HDMI/DVI 60Hz
Komp.
Deutsch -
BN68-01743A_00Ger.indd
2008/08/13
11:45:11
Fernbedienung
ist eine spezielle Fernbedienung fr Personen mit beeintrchtigtem Sehvermgen. Die
Dies
Netztaste sowie die Tasten zum Einstellen des Kanals und der Lautstrke, fr Stopp und
1 Netztaste
(Zum An- und Ausschalten
des Fernsehgerts)
2 Zifferntasten fr direkte
Programmplatzeingabe
3 Taste zum Auswhlen
von ein-/zweistelligen
Programmpltzen
4 Taste fr Kanalsteuerung
(Informationen hierzu finden
Sie auf Seite15.)
5 TV- und DTV-Modus direkt
aufrufen
6
Lautstrke erhhen
Lautstrke verringern
7 Ton vorbergehend
ausschalten
8 Bildschirm-Hauptmen
anzeigen
9 Zurck zum vorherigem
Men
@ Auswahl der Bildgre
# EPG-Anzeige
(Elektronischer
Programmfhrer)
$ Audiomodusauswahl
% Einstellung der
Fernbedienung
^ Whlt ein Zielgert aus,
das mit der SamsungFernbedienung
(Fernsehgert, DVD,
Set-Top-Box, Kabel,
Videorecorder) gesteuert
werden soll.
& Durch Drcken dieser
Taste werden die Tasten
fr Lautstrke und Kanl CH
sowie TV, DVD, CABLE,
STB und VCR auf der
Fernbedienung beleuchtet.
* Verfgbare Signalquelle
auswhlen
( Vorheriger Kanal
) DTV-Men einblenden
a Aufzeichnen von
Livesendungen
b Videorekorder-/DVDFunktionen (Rcklauf,
Stopp, Wiedergabe/Pause,
Vorlauf)
c
Nchster Kanal
Vorheriger Kanal
d OSD-Men ausblenden
Fortsetzung...
Deutsch -
BN68-01743A_00Ger.indd
2008/08/13
11:45:12
Als Verbraucher sind Sie verpflichtet, alte Batterien und Akkus zur umweltschonenden Entsorgung
zurckzugeben.
Sie knnen alte Batterien und Akkus bei den ffentlichen Sammelstellen in Ihrer Gemeinde oder
berall dort abgeben, wo Batterien und Akkus der betreffenden Art verkauft werden.
Deutsch -
BN68-01743A_00Ger.indd
2008/08/13
11:45:13
Drcken Sie die Taste MENU. Das Hauptmen wird auf dem
Bildschirm angezeigt.Auf der linken Seite des Mens befinden sich
fnf Symbole: Bild, Ton, Kanal, Einstellungen und Eingang.
Whlen Sie mit den Tasten oder eines der Symbole aus.
Drcken Sie die Taste ENTER/OK, um in das Untermen des
Symbols zu wechseln.
Drcken Sie die Taste oder , um im Men zu navigieren.
Drcken Sie die Taste ENTER/OK, um Menoptionen auszuwhlen.
ndern Sie mit den Tasten /// die gewhlte Option.
Durch Drcken der Taste RETURN gelangen Sie zurck ins
vorherige Men.
Drcken Sie zum Schlieen des Mens die Taste EXIT.
TV
Bild
Modus
: Dynamisch
Kontrast 100
Helligkeit 45
Schrfe 75
Farbe
55
Farbton
G 50
R 50
Farbtemp.
: Kalt1
Detaileinstellungen
Mehr
Navig.
Eingabe
Beenden
Deutsch - 10
BN68-01743A_00Ger.indd
10
2008/08/13
11:45:14
7
8
Whlen Sie durch Drcken der Tasten oder Ihr Land (oder
Plug & Play
Ihre Region) aus. Drcken Sie auf ENTER/OK.
Einige DTV-Funktionen sind mglicherweise
Die Meldung Einige DTV-Funktionen sind mglicherweise
nicht verfgbar. Digital Scan?
nicht verfgbar. Digital Scan? wird angezeigt.
Ja
Nein
Wenn in Ihrem Land die DTV-Funktionen untersttzt
werden, erscheint diese Meldung nicht. Sie knnen dann
Navig.
Eingabe
berspr.
die Anweisungen von Schritt 12 befolgen. Wenn Sie ein
Land mit DTV-Untersttzung einstellen, obwohl Ihr rtlicher
Plug & Play
Fernsehanbieter keine DTV-Sender unterhlt, wechselt das Gert
Autom. speichern
in den Modus fr DTV Plug & Play, aber die DTV-Funktionen
P 1
C
-40 MHz
0 %
bleiben dennoch wirkungslos. Wenn Sie Nein whlen, befolgen
Sie die Anweisungen von Schritt 7 bis 10. Wenn Sie Ja whlen,
Start
befolgen Sie die Anweisungen von Schritt 11.
Eingabe
berspr.
Drcken Sie die Taste oder , um Nein auszuwhlen, und
drcken Sie dann die Taste ENTER/OK. Das Men Autom.
Plug & Play
speichern wird angezeigt.
Zeit einstellen
Drcken Sie zum Starten des Suchlaufs der Kanle die Taste
Monat Datum Jahr Stunde Minute
ENTER/OK. Die Kanalsuche wird automatisch gestartet und
01
01
2007
12 : 00
beendet. Wenn Sie alle verfgbaren Sender gespeichert haben,
wird das Men Zeit einstellen angezeigt. Drcken Sie die Taste
Einstellen
Navig.
Eingabe
ENTER/OK.
Um die Suche vorzeitig abzubrechen, drcken Sie bei
Plug & Play
aktivierter Auswahl Stopp die Taste ENTER/OK.
Drcken Sie auf oder , um Monat, Datum, Jahr, Stunde
oder Minute einzustellen. Nehmen Sie die Einstellungen mit
0%
den Tasten oder vor.
Dienste gefunden: 0
Kanal: Sie knnen Monat, Datum, Jahr, Stunde oder Minute
Start
durch Drcken der Zifferntasten auf der Fernbedienung
direkt einstellen.
berspr.
Besttigen Sie die vorgenommenen Einstellungen mit der Taste
ENTER/OK. Die Meldung Wir wnschen gute Unterhaltung!
Plug & Play
wird angezeigt. Drcken Sie abschlieend die Taste ENTER/OK.
Auch wenn Sie die Taste ENTER/OK nicht drcken,
Digitale Dienste werden gesucht
verschwindet die Meldung nach einigen Sekunden von selbst.
29%
Dienste gefunden: 6
Kanal: 35
Drcken Sie die Taste oder , um Ja auszuwhlen, und
drcken Sie dann die Taste ENTER/OK. Das Men Autom.
Stopp
speichern wird angezeigt.
berspr.
Drcken Sie zum Starten des Suchlaufs der analogen
Kanle die Taste ENTER/OK. Die analoge Kanalsuche wird
automatisch gestartet und beendet. Wenn Sie alle verfgbaren
Plug & Play
analogen Kanle gespeichert haben, wird das Fenster zum
Iberische
Halbinsel
und
die Balearen
Suchen digitaler Kanle automatisch angezeigt.
Kanarische Inseln
Um die Suche vorzeitig abzubrechen, drcken Sie bei
aktivierter Auswahl Stopp die Taste ENTER/OK.
Drcken Sie zum Starten des Suchlaufs der digitalen Kanle
die Taste ENTER/OK. Die digitale Kanalsuche wird automatisch
Navig.
Whlen
berspr.
gestartet und beendet. Wenn Sie alle verfgbaren digitalen
Kanle gespeichert haben, wird das Fenster zum Auswhlen
einer Zeitzone fr Ihr Land angezeigt.
Um die Suche vorzeitig abzubrechen, drcken Sie bei aktivierter Auswahl Stopp die Taste
ENTER/OK.
Wenn der DTV-Kanal aktualisiert ist, wird die Signalquelle in der Liste der Signalquellen des
Eingangsmens automatisch in DTV gendert.
Detaillierte Beschreibungen der DTV-Kanalaktualisierung finden Sie auf Seite36 dieses
Handbuchs.
Drcken Sie die Taste oder , um die gewnschte Zeitzone auszuwhlen, und drcken Sie dann
die Taste ENTER/OK. Das Fenster zum Einstellen der Zeit wird angezeigt. Drcken Sie die Taste
ENTER/OK.
10
11
12
13
14
Fortsetzung...
Deutsch - 11
BN68-01743A_00Ger.indd
11
2008/08/13
11:45:16
01
15
Jahr
2007
Stunde Minute
12
Einstellen
00
Navig.
Whlen
berspr.
TV
Einstellungen
Plug & Play
Sprache
: Deutsch
Zeit
Spielemodus
: Aus
Blaues Bild
: Aus
Melodie
: Aus
PC
Heimkino-PC
: Aus
Lichteffekt
: Aus
Mehr
Navig.
Eingabe
Zurck
TV
Eingang
Quellen
: TV
Name bearb.
Anynet+
Navig.
TV
Eingabe
Zurck
Quellen
TV
Ext.1
Ext.2
AV
S-Video
Komp.
PC
HDMI1
HDMI2
HDMI3
DTV
Navig.
:
:
:
:
:
:
:
:
:
:
Eingabe
Zurck
Deutsch - 12
BN68-01743A_00Ger.indd
12
2008/08/13
11:45:17
Gertenamen bearbeiten
Sie knnen der externen Signalquelle einen Namen geben.
Eingang
TV
1 Drcken Sie die Taste MENU, um das Men anzuzeigen.
Quellen
: TV
Name bearb.
TV
Kanal
Belgien
Land
: Deutschland
Autom. speichern
Frankreich
Man. speichern Deutschland
Programmverwaltung
Italien
Sortieren
Niederlande
Name
Spanien
Feinabstimmung
LNA
: Aus
Navig.
TV
Eingabe
Zurck
Kanal
Land
: Deutschland
Autom. speichern
Man. speichern
Programmverwaltung
Sortieren
Name
Feinabstimmung
LNA
: Aus
Navig.
Eingabe
Zurck
Autom. speichern
P 1
--
40 MHz
0 %
Start
Eingabe
Zurck
Deutsch - 13
BN68-01743A_00Ger.indd
13
2008/08/13
11:45:18
speichern.
Bei der manuellen Senderspeicherung sind folgende Optionen
verfgbar:
Gefundene Sender speichern.
Die Programmnummer der einzelnen Sender, die Sie festlegen
mchten.
1 Drcken Sie die Taste MENU, um das Men anzuzeigen.
2 Drcken Sie die Taste oder , um Kanal auszuwhlen, und
drcken Sie dann die Taste ENTER/OK.
3 Drcken Sie die Taste oder , um Man. speichern
auszuwhlen, und drcken Sie dann die Taste ENTER/OK.
4 Whlen Sie mit den Tasten oder die gewnschte Option,
und drcken Sie dann die Taste ENTER/OK.
5 Wenn Sie die gewnschten nderungen vorgenommen haben,
drcken Sie die Taste ENTER/OK.
6 Drcken Sie zum Beenden die Taste EXIT.
TV
Kanal
Land
: Deutschland
Autom. speichern
Man. speichern
Programmverwaltung
Sortieren
Name
Feinabstimmung
LNA
: Aus
TV
Navig.
Eingabe
Zurck
Man. speichern
Programm
Fernsehnorm
Tonsystem
Kanal
Suchlauf
Speichern
Navig.
: P 1
: Auto
: BG
: C
4
: 63 MHz
: ?
Eingabe
Zurck
Kanalmodus
P (Programm-Modus): Nach Abschluss der Einstellungen sind den Sendern Ihrer Region
Positionsnummern von P00 bis P99 zugewiesen. In diesem Modus knnen Sie Sender durch
Eingabe des Programmplatzes auswhlen.
C (Antennenempfangsmodus): In diesem Modus knnen Sie Kanle durch Eingabe der Nummer
anwhlen, die jedem Antennensender zugeordnet ist.
S (Kabelkanal-Modus): In diesem Modus knnen Sie Sender durch Eingabe der Nummer
whlen, die jedem Kabelsender zugeordnet ist.
Deutsch - 14
BN68-01743A_00Ger.indd
14
2008/08/13
11:45:19
Sender hinzufgen/sperren
Bei DTV oder externem Eingangssignal nicht verfgbar.
Mit Hilfe der Programmverwaltung knnen Sie Sender bequem
TV
Kanal
Land
: Deutschland
Autom. speichern
Man. speichern
Programmverwaltung
Sortieren
Name
Feinabstimmung
LNA
: Aus
Navig.
TV
Eingabe
Zurck
Programmverwaltung
Kanalliste
Kindersicherung : Aus
Sender sperren
Mit dieser Funktion knnen Sie nicht autorisierte Benutzer, z.B.
Kinder, daran hindern, ungeeignete Programme anzuschauen, indem
das Bild blockiert und der Ton stummgeschaltet wird.
6
Navig.
Eingabe
Zurck
Kanalliste
P 1 C4
1 / 10
Progr.
0
1
2
3
4
5
6
7
8
9
C -C4
C 24
C2
C5
C 80
C7
C 36
C 52
C 11
Deutsch - 15
BN68-01743A_00Ger.indd
15
2008/08/13
11:45:20
Kanle benennen
Bei DTV oder externem Eingangssignal nicht verfgbar.
Sendernamen werden automatisch zugewiesen, sofern
TV
Kanal
Land
: Deutschland
Autom. speichern
Man. speichern
Programmverwaltung
Sortieren
Name
Feinabstimmung
LNA
: Aus
Navig.
TV
Eingabe
Zurck
Sortieren
Progr.
0
1
2
3
4
Send. Name
C
C76
C5
C6
C7
Navig.
TV
Eingabe
Zurck
Kanal
Land
: Deutschland
Autom. speichern
Man. speichern
Programmverwaltung
Sortieren
Name
Feinabstimmung
LNA
: Aus
Navig.
TV
Eingabe
Zurck
Name
Progr.
0
1
2
3
4
Send.
C
C76
C5
C6
C7
Navig.
Name
Eingabe
Zurck
Deutsch - 16
BN68-01743A_00Ger.indd
16
2008/08/13
11:45:21
Senderfeinabstimmung durchfhren
Bei DTV oder externem Eingangssignal nicht verfgbar.
Bei klarem Empfang ist keine Feinabstimmung ntig, da diese
TV
Kanal
Land
: Deutschland
Autom. speichern
Man. speichern
Programmverwaltung
Sortieren
Name
Feinabstimmung
LNA
: Aus
Navig.
Zurck
Feinabstimmung
P 1
Eingabe
+3
Reset
Einstellen
Speichern
Zurck
P 1*
Mono
Bild
Ton
SRS TS XT
:
: Dynamisch
: Benutzerdef.
: Aus
Sortieren
Feinabstimmung
Deutsch - 17
BN68-01743A_00Ger.indd
17
2008/08/13
11:45:22
Bildstandard ndern
Sie knnen den Bildstandard auswhlen, der fr Ihre
Sehgewohnheiten am besten geeignet ist.
1 Drcken Sie die Taste MENU, um das Men anzuzeigen.
2 Drcken Sie die Taste ENTER/OK, um Bild auszuwhlen.
3 Drcken Sie erneut die Taste ENTER/OK, um Modus
auszuwhlen.
4 Whlen Sie mit den Tasten oder den gewnschten
Modus, und drcken Sie dann die Taste ENTER/OK.
Verfgbare Modi: Dynamisch, Standard, Film
Die Einstellungswerte knnen je nach Eingangsquelle
unterschiedlich sein. (Beispiel: Radio, Video, Component,
PC oder HDMI.)
5 Drcken Sie zum Beenden die Taste EXIT.
TV
Bild
Modus
: Dynamisch
Kontrast 100
Helligkeit 45
Schrfe 75
Farbe
55
Farbton
G 50
R 50
Farbtemp.
: Kalt1
Detaileinstellungen
Mehr
Navig.
TV
Eingabe
Zurck
Bild
Dynamisch
Modus
: Dynamisch
Standard
Kontrast
100
Film
Helligkeit 45
Schrfe 75
Farbe
55
Farbton
G 50
R 50
Farbtemp.
: Kalt1
Detaileinstellungen
Mehr
Navig.
Eingabe
Zurck
Bildeinstellungen anpassen
Das Gert verfgt ber mehrere Einstellmglichkeiten fr die
TV
Bild
Bildqualitt:
Modus
: Dynamisch
Kontrast 100
1 Drcken Sie die Taste MENU, um das Men anzuzeigen.
Helligkeit 45
Schrfe 75
2 Drcken Sie die Taste ENTER/OK, um Bild auszuwhlen.
Farbe
55
Farbton
G 50
R 50
3 Drcken Sie erneut die Taste ENTER/OK, um Modus
Farbtemp.
: Kalt1
auszuwhlen.
Detaileinstellungen
4 Whlen Sie mit den Tasten oder den gewnschten
Mehr
Modus, und drcken Sie dann die Taste ENTER/OK.
Navig.
Eingabe
Zurck
Verfgbare Modi: Dynamisch, Standard, Film
TV
Bild
5 Whlen Sie mit den Tasten oder die gewnschte Option,
und drcken Sie dann die Taste ENTER/OK.
Modus
: Dynamisch
Kontrast 100
6 Wenn Sie die gewnschten nderungen vorgenommen haben,
Helligkeit 45
Schrfe 75
drcken Sie die Taste ENTER/OK.
Farbe
55
Farbton
G 50
7 Drcken Sie zum Beenden die Taste EXIT.
Kalt2 R 50
Farbtemp.
: Kalt1 Kalt1
Detaileinstellungen Normal
Kontrast Helligkeit Schrfe Farbe Farbton
Warm1
Sie knnen die Funktion Tint (Farbton) im TV-, AV- oder
Mehr
Warm2
S-Video-Modus des PAL-Systems nicht verwenden.
Navig.
Eingabe
Zurck
Kontrast Helligkeit Farbtemp. : PC-Modus
Drcken Sie die Taste or , bis die optimale Einstellung
erreicht ist.
Farbtemp.: Kalt2/Kalt1/Normal/Warm1/Warm2
Wenn der Bildmodus auf Dynamisch oder Standard eingestellt ist, knnen Warm1 und Warm2
nicht ausgewhlt werden.
Reset: Abbrechen/OK
Whlen Sie OK. Sie knnen die Einstellungen auf die werkseitig festgelegten
Standardbildeinstellungen zurcksetzen.
Die Funktion Reset wird fr jeden Bildmodus und Farbton konfiguriert.
Deutsch - 18
BN68-01743A_00Ger.indd
18
2008/08/13
11:45:23
TV
Bild
Modus
: Film
Kontrast 80
Helligkeit 65
Schrfe 35
Farbe
35
Farbton
G 50
R 50
Farbtemp.
: Warm2
Detaileinstellungen
Mehr
TV
Eingabe
Zurck
Detaileinstellungen
Schwarzabgleich : Aus
Optimalkontrast : Gering
Gamma
: 0
Weiabgleich
Farbanpassung
Kantenglttung
: Aus
Farbraum
: Breit
Navig.
Navig.
Eingabe
Zurck
Schwarzabgleich: Aus/Gering/Mittel/Hoch
Sie knnen direkt auf dem Bildschirm den Schwarzwert auswhlen, um die Bildschirmtiefe
anzupassen.
Optimalkontrast: Aus/Gering/Mittel/Hoch
Sie knnen den Bildschirmkontrast so anpassen, dass ein optimaler Kontrast gewhrleistet ist.
Gamma: -3 ~ +3
Sie knnen die mittlere Bildhelligkeit einstellen.
Drcken Sie die Taste oder , bis die optimale Einstellung erreicht ist.
Weiabgleich: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset
Um natrlichere Bildfarben zu erhalten, knnen Sie die Farbtemperatur anpassen.
R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Wenn Sie den Anpassungswert ndern, wird
der angepasste Bildschirm aktualisiert.
Whlen Sie mit den Tasten oder die gewnschte Option, und drcken Sie dann die Taste
ENTER/OK. Drcken Sie die Taste oder , bis die optimale Einstellung erreicht ist.
Reset: Der zuvor angepasste Weiabgleich wird auf die Werkseinstellungen zurckgesetzt.
Farbanpassung: Rosa/Grn/Blau/Wei/Reset
Sie knnen diese Einstellung Ihrem persnlichen Geschmack anpassen.
Rosa/Grn/Blau/Wei: Wenn Sie den Anpassungswert ndern, wird der angepasste Bildschirm
aktualisiert.
Whlen Sie mit den Tasten oder die gewnschte Option, und drcken Sie dann die Taste
ENTER/OK. Drcken Sie die Taste oder , bis die optimale Einstellung erreicht ist.
Reset: Die zuvor angepassten Farben werden auf die Werkseinstellungen zurckgesetzt.
Kantenglttung: Ein/Aus
Sie knnen die Objektgrenzen betonen.
Farbraum: Auto/Breit
Sie knnen den Farbreproduktionsraum fr das Eingangssignal auf Auto oder Breit festlegen.
Deutsch - 19
BN68-01743A_00Ger.indd
19
2008/08/13
11:45:23
Digitale RM
: Auto
Kino-Plus
: Ein
4 Whlen Sie mit den Tasten oder die gewnschte Option, und
drcken Sie dann die Taste ENTER/OK.
Verfgbare Optionen: Autom. Breit, 16:9, Breitenzoom, Zoom, 4:3,
Navig.
Eingabe
Zurck
Nur Scan
T
V
Format
Autom. Breit: Bild vergrern und vom 4:3- auf 16:9Autom. Breit
Seitenverhltnis umstellen.
16:9
16:9: Stellt das Bildformat auf den Breitbildmodus 16:9 ein.
Breitenzoom
Zoom
Breitenzoom: Diese Option vergrert das Bild auf mehr als 4:3.
4:3
Verschieben Sie das Bild mit den Tasten oder nach oben
Nur Scan
oder nach unten, nachdem Sie mit der Taste oder eine
Auswahl getroffen haben.
Zoom: Vergrert das Bild vertikal.
4:3: Stellt das Bildformat auf den Normalmodus 4:3 ein.
Navig.
Eingabe
Zurck
Nur Scan: Die eingegangenen Szenen warden angezeigt, wie sie
sind, ohne dass Bildteile abgeschnitten werden. Dies erfolgt bei
Eingangssignalen mit HDMI 720p, 1080i.
Beim HDMI-Bildformat Nur Scan kann es je nach AV-Gert
passieren, dass der Bildschirm am Rand abgeschnitten wird
oder dass eine bestimmte Farbe auf den Bildschirm erscheint.
5 Drcken Sie zum Beenden die Taste EXIT.
Sie knnen das Bildformat ndern, indem Sie auf der Fernbedienung einfach die Taste P.SIZE drcken.
Je nach Signalquelle knnen die Bildgrenoptionen variieren.
Die verfgbaren Elemente knnen in Abhngigkeit vom ausgewhlten Modus variieren.
Farbverstrkung
: Ein
Kino-Plus
: Ein
BN68-01743A_00Ger.indd
20
2008/08/13
11:45:24
TV
Bild
Drcken Sie die Taste MENU, um das Men anzuzeigen.
Mehr
Drcken Sie die Taste ENTER/OK, um Bild auszuwhlen.
Format
: Autom. Breit
Bildschirmmodus : 16 : 9
DNIe
: Aus
Verfgbare Optionen: Digitale RM, Farbverstrkung, DNIe,
Kino-Plus
: Ein
Kino-Plus
Reset
: OK
Deutsch - 21
BN68-01743A_00Ger.indd
21
2008/08/13
11:45:25
Audiofunktionen
1
2
Auto. Lautst.
: Aus
Sendung passt.
SRS TS XT
: Aus
Auto. Lautst.
: Aus
Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz
Int. Ton aus
: Aus
BN68-01743A_00Ger.indd
22
2008/08/13
11:45:26
NICAM
Stereo
Bildschirmanzeige
Standardsendung
(Standardtonwiedergabe)
NICAM
Mono
(Normal)
NICAM-Stereo
NICAM
Stereo
Mono
(Normal)
NICAM Dual-I/II
A2
Stereo
Standardsendung
(Standardtonwiedergabe)
Zweisprachig oder
Dual-I/II
Stereo
NICAM
Dual-1
NICAM
Dual-2
Mono
(Normal)
Dual II
Stereo
Mono
(Mono
erzwungen)
Deutsch - 23
BN68-01743A_00Ger.indd
23
2008/08/13
11:45:26
Zeitfunktionen
1
2
TV
Einstellungen
Drcken Sie die Taste MENU, um das Men anzuzeigen.
Spielemodus
: Aus
Melodie
: Aus
Lichteffekt
: Aus
und drcken Sie dann die Taste ENTER/OK.
Mehr
Verfgbare Optionen: Zeit einstellen, Sleep-Timer, Timer 1,
Navig.
Eingabe
Zurck
Timer 2, Timer 3
TV
Time
5 Wenn Sie die gewnschten nderungen vorgenommen haben,
drcken Sie die Taste ENTER/OK.
Zeit einstellen
: 00 : 00
Sleep-Timer
: Aus
Ausschalten
Autom.
Wenn Sie den Timer einstellen, schaltet sich das Fernsehgert drei Stunden nach dem Einschalten
durch den Timer ab, wenn in dieser Zeit keine weiteren Funktionen bedient werden. Diese Funktion
ist nur im Modus Ein des Timers verfgbar und verhindert Schden durch berhitzung, wenn das
Fernsehgert zu lange eingeschaltet ist.
Deutsch - 24
BN68-01743A_00Ger.indd
24
2008/08/13
11:45:28
TV
Einstellungen
Drcken Sie die Taste MENU, um das Men anzuzeigen.
Spielemodus
: Aus
Melodie
: Aus
Verfgbare Optionen: Sprache, Blaues Bild, Melodie,
Heimkino-PC
: Aus
Lichteffekt
: Aus
Lichteffekt, Energiesparmod., HDMI-Schwarzwert
Mehr
4 Wenn Sie die gewnschten nderungen vorgenommen haben,
Navig.
Eingabe
Zurck
drcken Sie die Taste ENTER/OK.
T
V
Einstellungen
5 Drcken Sie zum Beenden die Taste EXIT.
Mehr
Sprache
Einstellung fr Wandmontage
Die verfgbaren Optionen in diesem Men sind
Energiesparmod. : Aus
HDMI-Schwarzwert : Gering
Deutsch - 25
BN68-01743A_00Ger.indd
25
2008/08/13
11:45:28
Spielemodus verwenden
Wenn Sie eine Spielekonsole wie PlayStationTM oder XboxTM
TV
Einstellungen
anschlieen, knnen Sie durch Auswhlen des Spielemodus
Plug & Play
Sprache
: Deutsch
Spielemodus
: Aus
PC
Deutsch - 26
BN68-01743A_00Ger.indd
26
2008/08/13
11:45:28
Automatische Wandhalterung
TV
Einstellungen
Mehr
Einstellung fr Wandmontage
Energy Saving
: Aus
HDMI-Schwarzwert : Normal
PIP
Bildschirm-Einbrennschutz
Zurck
Position1
Einstellen
Taste
Eingabe
Einstellung fr Wandmontage
Position
Navig.
1
INFO
Center
Beenden
Vorgang
Wandmontagewinkel einstellen
Zurcksetzen
Deutsch - 27
BN68-01743A_00Ger.indd
27
2008/08/13
11:45:30
HDMI-Schwarzwert : Gering
: TV
Quelle
Position, Programm
Format
:
Position
:
O
O
O
O
O
O
O
O
O
X
X
X
Komp.
X
X
X
HDMI PC Digital-TV
X
X
X
X
X
X
X
X
X
Deutsch - 28
BN68-01743A_00Ger.indd
28
2008/08/13
11:45:31
Einbrennschutz
Dieses Gert ist mit Einbrennschutz-Technologie ausgestattet,
um die Mglichkeit des Einbrennens des Monitorbildes zu
verringern. Diese Technologie ermglicht das Einstellen von
vertikalen (Pixel vertikal) und horizontalen (Pixel horizontal)
Bildbewegungen. Die Zeiteinstellung ermglicht
das Programmieren der Dauer zwischen Bildbewegungen in
Minuten.
1 Drcken Sie die Taste MENU, um das Men anzuzeigen.
2 Drcken Sie die Taste oder , um Einstellungen
auszuwhlen, und drcken Sie dann die Taste ENTER/OK.
3 Drcken Sie die Taste oder , um BildschirmEinbrennschutz auszuwhlen, und drcken Sie dann die Taste
ENTER/OK.
4 Whlen Sie mit den Tasten oder die gewnschte Option,
und drcken Sie dann die Taste ENTER/OK.
Verfgbare Optionen: Pixel-Shift, Vollweiss,
Korrekturmuster, Seite grau
5 Wenn Sie die gewnschten nderungen vorgenommen haben,
drcken Sie die Taste ENTER/OK.
6 Drcken Sie zum Beenden die Taste EXIT.
Pixel-Shift: Diese Funktion verschiebt Pixel auf dem
Plasmabildschirm horizontal oder vertikal, um die Mglichkeit
des Einbrennens des Bildes zu minimieren.
Whlen Sie durch Drcken der Tasten oder fr PixelShift die Optionen Aus oder An, und drcken Sie dann die
Taste ENTER/OK.
Whlen Sie mit den Tasten oder die gewnschte
Option, und drcken Sie dann die Taste ENTER/OK.
Verfgbare Optionen: Pixel horizontal, Pixel vertikal, Zeit
Optimale Einstellung fr Pixel den Pixelabstand
TV
Einstellungen
Mehr
Einstellung fr Wandmontage
Energiesparmod. : Aus
HDMI-Schwarzwert : Gering
PIP
Bildschirm-Einbrennschutz
TV
Navig.
Eingabe
Zurck
Bildschirm-Einbrennschutz
Pixel-Shift
Vollweiss
Korrekturmuster
Seite grau
: Dunkel
Navig.
TV
Eingabe
Zurck
Pixel-Shift
Pixel-Shift
Pixel horizontal
Pixel vertikal
Zeit
Navig.
: Ein
: 2
: 2
: 2 Min.
Eingabe
Zurck
PC
Pixel horizontal
Pixel vertikal
Zeit (Minuten)
1
1
2 Min.
TV/Ext/AV/S-Video/
Komp./HDMI/DTV
2
2
2 Min.
Pixel Shift-Wert kann in Abhngigkeit von der Monitorgre (Zoll) und dem ausgewhlten
Der
Modus variieren.
Vollweiss: Diese Funktion dient zum Entfernen von Nachbildern auf dem Bildschirm, indem sie die
Farbe aller Pixel in Wei ndert. Verwenden Sie diese Funktion, wenn Nachbilder oder -symbole auf
dem Bildschirm angezeigt werden. Diese knnen insbesondere dann auftreten, wenn ein Standbild
ber lngere Zeit auf dem Bildschirm angezeigt wurde.
Korrekturmuster: Diese Funktion dient zum Entfernen von Nachbildern auf dem Bildschirm, indem
alle Pixel des Plasmabildschirms nach einem bestimmten Muster verschoben werden. Verwenden
Sie diese Funktion, wenn Nachbilder oder -symbole auf dem Bildschirm angezeigt werden. Diese
knnen insbesondere dann auftreten, wenn ein Standbild ber lngere Zeit auf dem Bildschirm
angezeigt wurde.
Seite grau: Sie verhindern bei Anzeige im Format 4:3 Beschdigungen des Bildschirms, indem Sie
einen Weiabgleich an den beiden linken Bildschirmrndern vornehmen.
Dunkel: Bei Anzeige im Format 4:3 werden die beiden seitlichen Bildschirmrnder abgedunkelt.
Hell: Bei Anzeige im Format 4:3 werden die beiden seitlichen Bildschirmrnder aufgehellt.
Zum Entfernen von Nachbildern verwenden Sie entweder die Funktion Vollweiss oder die Funktion
Korrekturmuster. Beide Fun ktionen entfernen Nachbilder auf dem Bildschirm, die Funktion
Korrekturmuster ist jedoch effektiver.
Die Funktion zum Entfernen von Nachbildern muss ber einen lngeren Zeitraum (ca. 1Stunde)
ausgefhrt werden, um Nachbilder auf dem Bildschirm effektiv zu entfernen. Wenn das Nachbild
nach dem Ausfhren der Funktion nicht entfernt ist, wiederholen Sie die Anwendung der Funktion.
Drcken Sie zum Deaktivieren dieser Funktion eine beliebige Taste auf der Fernbedienung.
Deutsch - 29
BN68-01743A_00Ger.indd
29
2008/08/13
11:45:31
Deutsch - 30
BN68-01743A_00Ger.indd
30
2008/08/13
11:45:32
Eingangsmodus (PC)
Bildschirmposition und -gre hngen vom Typ des PC-Monitors und seiner Auflsung ab.
In der nachstehenden Tabelle sind alle untersttzten Monitormodi aufgefhrt:
Videosignal
Auflsung
(Punkte X
Zeilen)
640x350
720x400
640x480
IBM
PC- / ATKompatibel
800x600
1024x768
Vertikalfrequenz:
[Hz]
70.086
70.087
59.940
70.000
72.809
75.000
60.317
70.000
72.188
75.000
60.004
70.069
72.000
75.029
Horizontalfrequenz
(kHz)
31.469
31.469
31.469
35.000
37.861
37.500
37.879
43.750
48.077
46.875
48.363
56.476
57.672
60.023
Vertikalpolaritt
Horizontalpolaritt
PS42A417
N
P
N
N/P
N
N
P
N/P
P
P
N
N
N/P
P
P
N
N
N/P
N
N
P
N/P
P
P
N
N
N/P
P
Deutsch - 31
BN68-01743A_00Ger.indd
31
2008/08/13
11:45:32
Einstellungen fr PC vornehmen
Whlen Sie den PC-Modus, indem Sie die Taste Quelle
drcken.
TV
Einstellungen
Plug & Play
Sprache
: Deutsch
Zeit
Spielemodus
: Aus
Blaues Bild
: Aus
Melodie
: Aus
PC
Heimkino-PC
: Aus
Lichteffekt
: Aus
Mehr
1
2
Navig.
TV
Eingabe
Zurck
PC
Bildjustierung
Position
Autom. Einstellung
Bild zurcksetzen
TV
Navig.
Eingabe
Zurck
Bildjustierung
Grob
Fein
Navig.
TV
50
31
Eingabe
Zurck
Position
Navig.
Eingabe
Zurck
Deutsch - 32
BN68-01743A_00Ger.indd
32
2008/08/13
11:45:32
Sprache
: Deutsch
Blaues Bild
: Aus
PC
Deutsch - 33
BN68-01743A_00Ger.indd
33
2008/08/13
11:45:33
sterreich) die einwandfreie Funktionsweise des DTVMens, weil nur diese Lnderstandards untersttzt werden.
Wenn das Land des Senders von dem Land abweicht,
das vom Benutzer gewhlt wurde, werden auerdem
mglicherweise die Zeichen, die im Kanal-Banner, in der
Info, in der Anleitung, Programmverwaltung usw. zu sehen
sind, nicht korrekt angezeigt.
Verfgbar im DTV-Modus. Voreingestellt auf den DTVModus mithilfe der Taste TV/DTV auf der Fernbedienung.
Zur Untersttzung bei der Navigation im
Bildschirmmensystem und beim Einrichten der
verschiedenen verfgbaren Einstellungen studieren Sie
bitte die folgende Abbildung.
TV-Programm
Heute & Morgen
Ausfhrlich
Programmiert
Standard
Navig.
: Ausfhrlich
Eingabe
Beenden
Kanal
Autom. speichern
Man. speichern
Favoriten bearbeiten
Kanalliste
Navig.
Eingabe
Beenden
Einstellungen
Kanal
Autom. speichern
Man. speichern
Favoriten bearbeiten
Kanalliste
Einstellungen
Mentransparenz
Kindersicherung
Untertitel
Untertitelmodus
Audioformat
Digitaltext
Zeitzone
System
Alle
Favoriten
Standard
Mentransparenz : Mittel
Kindersicherung
Untertitel : Ein
Untertitelmodus : Normal
Audioformat : PCM
Navig.
Eingabe
Beenden
Hoch
Mittel
Gering
Deckend
Altersbeschrnkung
PIN ndern
Aus
Ein
Normal
Schwerhrig
PCM
Dolby Digital
Deaktivieren
Aktivieren
Produktinformation
Signalinformation
Software-Update
Common Interface
Reset
Fortsetzung...
Deutsch - 34
BN68-01743A_00Ger.indd
34
2008/08/13
11:45:34
Sprache
Wiedergabesprache
Untertitelsprache
Teletext-Sprache
Voreinstellung
Sprache
Wiedergabesprache
Untertitelsprache
Teletext-Sprache
Voreinstellung
Primre Audiosprache
Sekundre Audiosprache
Primre Untertitelsprache
Sekundre Untertitelsprache
Primre Videotextsprache
Sekundre Videotextsprache
Navig.
Eingabe
Beenden
Untermens des CI-Mens sind abhngig vom Modell des CAM-Moduls. (Informationen hierzu
Die
finden Sie auf Seite 45.)
Programminformationen anzeigen
Whrend sie ein Programm sehen, knnen zustzliche
Information darber angezeigt werden.
Drcken Sie beim Anzeigen des Programms die Taste Info.
Die Programminformationen werden angezeigt.
Die Informationen werden angezeigt:
Altersbeschrnkung
Videotyp: SD, HD, Radio
Audiomodus: Mono, Stereo, Dual, Dolby Digital
Anzeige von Videotext oder DVB-Untertiteln
Wiedergabesprache
Zum Verlassen der Bannerinformationen drcken Sie die
Taste INFO.
Alle Kanle
14:20 - 14:33
Contains video with AFD O; coded frame
is 16:9
Beenden
Deutsch - 35
BN68-01743A_00Ger.indd
35
2008/08/13
11:45:35
Kanal
Das Men umfasst die 4 folgenden Untermens:
Autom. speichern, Man. speichern, Favoriten bearbeiten
und Kanalliste.
Drcken Sie die Taste oder , um Kanal auszuwhlen,
und drcken Sie dann die Taste ENTER/OK. Das Men
Kanal wird angezeigt.
Kanal
Autom. speichern
Man. speichern
Favoriten bearbeiten
Kanalliste
Navig.
Eingabe
Beenden
Kanal
Autom. speichern
Man. speichern
Favoriten bearbeiten
Kanalliste
Navig.
Eingabe
Zurck
Autom. speichern
0%
Dienste gefunden: 0
Kanal: -
Start
Zurck
Kanal
Man. speichern
Verfgbar sind die Kanle 21 ~ 68. Die Frequenz des
gewhlten Kanals wird automatisch eingestellt.
Frequenz
Navig.
Eingabe
Zurck
Geben Sie die Frequenz (kHz) ber die Zifferntasten
(0 ~ 9) ein. Falls Sie die genaue Frequenz nicht kennen,
Man. speichern
gehen Sie wie im obigen Schritt vor, um die Frequenz mit
der Kanalsuche automatisch auszuwhlen.
Kanal
Frequenz
Bandbreite
Bandbreite
5
177500 KHz 7 MHz
Drcken Sie die Tasten oder , um eine Bandbreite
auszuwhlen. Es sind die Bandbreiten 7 und 8 MHz
verfgbar.
Suchlauf
Drcken Sie zum Starten des Suchlaufs fr Digitalsender
Einstellen
Zurck
erneut die rote Taste. Nach Abschluss des Suchlaufs
werden die Kanle in der Kanalliste aktualisiert.
Sie knnen die Eingabe ber die Taste auf der Fernbedienung vornehmen.
Sie knnen nicht nur die Frequenz ndern. Wenn sie aber einen Kanal ndern, wird die
Frequenz automatisch angepasst.
Fortsetzung...
Deutsch - 36
BN68-01743A_00Ger.indd
36
2008/08/13
11:45:36
Kanal
1.3 Favoriten bearbeiten
Sie knnen Ihre bevorzugten Kanle mit den farbigen Tasten
Autom. speichern
bearbeiten.
Man. speichern
2
Five
mchten, drcken Sie erneut die Taste ENTER/OK.
3
BBC THREE
Alle whlen: Whlen Sie alle angezeigten Kanle aus.
4
abc1
5
QVC
Keinen whlen: Auswahl aller ausgewhlten
Kanle aufheben.
Alle whlen
Keinen whlen
Vorschau
Vorschau: Zeigt alle ausgewhlten Kanle an.
Navig.
Whlen
Zurck
Die Einstellung der bevorzugten Kanle ist damit
Favoriten bearbeiten
abgeschlossen.
Zufg
Sie knnen diese Funktion verwenden, nachdem Sie einen
1
BBC TWO
2
BBC THREE
Fortsetzung...
Deutsch - 37
BN68-01743A_00Ger.indd
37
2008/08/13
11:45:37
Kanalliste
1.4 Kanalliste
Alle Kanle-Alle
Sie knnen eine Liste aller Kanle oder Ihrer Favoriten anzeigen. BBC TWO
1. Test Card M...
806 arte
40. BBC NEWS24
Drcken Sie die Taste oder , um Kanalliste
51. BBCi
2. BBC TWO
800 ARD-MHP-DATA
auszuwhlen, und drcken Sie dann die Taste ENTER/OK. 3.4. Vida003b
801 ARD-OnLine-K..
Vida004b
802 BBC ONE
5. Vida005b
Es kann mit der Taste CH LIST angezeigt werden.
803 MDR FERNSE..
6. Vida006b
804 NDR FERNSEH..
7. BBC THREE
Drcken Sie die gelbe Taste, um zwischen den
30. CBBC Kanal
805 Vida002b
bevorzugten Kanlen und der Liste mit allen Kanlen
Vorige Seite
Nchste Seite
Favoriten
TV
umzuschalten.
Navig.
Ansehen
Beenden
Die Liste der bevorzugten Kanle enthlt nur die Kanle,
die Sie vorher mit dem Men Favoriten bearbeiten (siehe
Seite 37) bestimmt haben.
Drcken Sie die rote oder grne Taste, um die vorherige
oder die nchste Seite der Kanalliste anzuzeigen.
Drcken Sie die Taste oder , um den gewnschten
Kanal auszuwhlen, und drcken Sie dann die Taste
ENTER/OK.
Kanalnummer, Name und ein Symbol werden in der oberen linken Ecke angezeigt, whrend
sie den Kanal wechseln. Die Kanalnummer und der Name werden angezeigt, wenn der
Kanal einer derjenigen aus der Liste aller Kanle ist, und ein Symbol wird angezeigt,
wenn der Kanal einer der Favoriten ist.
Drcken Sie die blaue Taste oder CH LIST, um die Anzeige der Kanalliste zu beenden.
2 TV-Programm
Heute & Morgen
Das Men umfasst die 4 folgenden Untermens:
Heute & Morgen, Ausfhrlich, Programmiert und Standard.
2.1 Heute & Morgen / Ausfhrlich (Programmfhrer)
Die Informationen des elektronischen Programmfhrers
werden von den Sendern zur Verfgung gestellt. Es kann sein,
dass Programmeintrge leer oder veraltet sind. Dies ist auf
die fr einen bestimmten Kanal bertragenen Informationen
zurckzufhren.
Die Anzeige wird dynamisch aktualisiert, sobald neue
Informationen verfgbar sind.
Heute & Morgen
Fr die sechs in der linken Spalte angezeigten Kanle
werden die aktuelle und die nchste Sendung angezeigt.
Ausfhrlich
Hier werden die Programminformation in einem Zeitplan mit
einer Unterteilung von jeweils 30 Minuten aufbereitet. Es wird
ein Zeitfenster von 1,5 Stunden mit Programminformationen
angezeigt. Dieses Fenster kann jedoch in der Zeit nach
vorne oder nach hinten verschoben werden.
Drcken Sie die Taste oder , um fr den
Programmfhrer Heute & Morgen oder Ausfhrlich
auszuwhlen. Drcken Sie die Taste ENTER/OK. Das
Men fr den gewhlten Programmfhrer wird angezeigt.
Drcken Sie die rote Taste, um fr den Programmfhrer
Heute & Morgen oder Ausfhrlich auszuwhlen.
Drcken Sie die grne Taste, um die Favoriten oder die
Liste Alle Kanle anzuzeigen.
Drcken Sie die gelbe Taste, um schnell nach hinten zu
blttern (24 Stunden).
Drcken Sie die blaue Taste, um schnell nach vorn zu
blttern (24 Stunden).
Sie knnen das TV-Programmmen auch durch
Drcken der Taste GUIDE aufrufen.
Drcken Sie im Programmfhrer die Taste ///, um
das gewnschte Programm auszuwhlen, und drcken Sie
dann die Taste ENTER/OK.
Sobald Sie ein Programm gewhlt haben, wird es zusammen mit einem Uhr-Symbol
angezeigt. Wenn Sie erneut ENTER/OK drcken, wird die Programmwahl aufgehoben und
das Uhr-Symbol verschwindet. Weitere Informationen ber das Vormerken von Programmen
finden Sie im Abschnitt.
Fortsetzung...
Akt.
Ansehen
Ausfhrlich
Nch.
Favoriten
Ende
Deutsch - 38
BN68-01743A_00Ger.indd
38
2008/08/13
11:45:38
Zur Anzeige der Programminformationen drcken Sie auf ///, um ein Programm
auszuwhlen, und drcken Sie dann auf INFO.
Nun werden oben rechts auf dem Bildschirm Informationen wie die die Kanalnummer,
der Titel des Programms und die Programmdauer, die Statusleisteninformationen
sowie eine Kurzzusammenfassung des markierten Programms angezeigt. Ist die
Zusammenfassung lnger, wird angezeigt. Drcken Sie die Taste INFO, wenn Sie
die ausfhrliche Version der Zusammenfassung lesen mchten.
Sechs Kanle werden angezeigt. Um den Kanal zu wechseln, whlen Sie mit den
Tasten oder den gewnschten Kanal aus. Fr eine seitenweise Darstellung
whlen Sie Taste P
oder
.
2.2 Programmiert
Programmiert
Wenn Sie eine Vormerkliste der Sendungen angelegt haben,
die Sie gern sehen mchten, wird das Gert zur vorgemerkten
Thursday 22 Apr
15:30 ~ 18:00 Einmal
2 BBC TWO
Animal Park
Zeit automatisch auch dann auf das vorgemerkte Programm
Thursday 22 Apr 20:00 ~ 21:00 Einmal
umgeschaltet, wenn Sie gerade eine andere Sendung sehen.
2 BBC TWO
The Hairy Bikers
Drcken Sie die rote Taste, um ein neues Programm
hinzuzufgen. Das Men zum Hinzufgen von
Programmen wird angezeigt. Kanal ist dabei ausgewhlt.
Programm zufg.
Bearbeiten
Lschen
Drcken Sie die Taste oder undTaste ENTER/OK,
Navig.
Zurck
um Kanal, Zeit, Datum und Frequenz einzustellen. Wenn
Programmiert
Sie die gewnschten nderungen vorgenommen haben,
speichern Sie den genderten Vormerkplan, und drcken
Kanal
810 Super RTL
Sie die rote Taste.
Zeit
10 : 15 to - - : - Wenn Sie die Vormerkung des Programms bearbeiten
Thu 03 Mar 2005
Datum
mchten, whlen Sie mit den Tasten oder ein
Programm, und drcken Sie dann die grne Taste. Whlen
Frequenz
Sie ntigenfalls mit den Tasten oder das Programm,
Speichern
Abbrechen
das gelscht werden soll, und drcken Sie anschlieend
Einstellen
Navig.
Zurck
die blaue Taste.
Bei Anzeige von Analogfernsehen knnen Sie den
vorgemerkten DTV-Kanal nicht wechseln. Der Kanal
wechselt nur dann automatisch zum reservierten
Kanal, wenn Sie DTV anzeigen.
Programmvormerkungen knnen Sie nur bei
angeschaltetem Fernseher, nicht aber aus dem
Standbymodus heraus vornehmen. Weitere Informationen zum automatischen Ein- und
Ausschalten des Fernsehgerts finden Sie auf Seite 9.
2.3 Standard
Sie knnen einstellen, welcher Programmfhrer als Standard
angezeigt werden soll.
Whlen Sie die erforderliche Option durch Drcken
der Taste oder (Akt./Nch oder Ausfhrlich)
aus, und drcken Sie dann die Taste ENTER/OK. Die
gewhlte Option fr den Standardfhrer wird im Men des
Programmfhrers angezeigt. Anschlieend erscheint die
Kanalliste.
TV-Programm
Heute & Morgen
Ausfhrlich
Programmiert
Standard
Navig.
: Ausfhrlich
Eingabe
Zurck
TV-Programm
Heute & Morgen
Ausfhrlich
Programmiert
Standard
Navig.
Akt./Nch.
: Ausfhrlich
Ausfhrlich
Eingabe
Zurck
Fortsetzung...
Deutsch - 39
BN68-01743A_00Ger.indd
39
2008/08/13
11:45:40
TV-Programm
Heute & Morgen
Ausfhrlich
Programmiert
Standard
Navig.
: Ausfhrlich
Eingabe
Zurck
Akt.
Nch.
Ansehen
Ausfhrlich
Favoriten
Ende
Ansehen
Ausfhrlich
3. Sprache
Das Men umfasst die 4 folgenden Untermens:
Wiedergabesprache, Untertitelsprache, Teletext-Sprache
und Voreinstellung.
Nein
Favoriten
Ende
Sprache
Wiedergabesprache
Untertitelsprache
Teletext-Sprache
Voreinstellung
Navig.
Eingabe
Zurck
Fortsetzung...
Deutsch - 40
BN68-01743A_00Ger.indd
40
2008/08/13
11:45:41
Sprache
3.2 Voreinstellung
Das Men umfasst die 6 folgenden Untermens:
Wiedergabesprache
Primre Untertitelsprache, Sekundre Untertitelsprache,
Untertitelsprache
Primre Audiosprache, Sekundre Audiosprache, Primre
Teletext-Sprache
Videotextsprache und Sekundre Videotextsprache.
Voreinstellung
Taste ENTER/OK.
Navig.
Eingabe
Zurck
Es werden die Optionen des ausgewhlten Mens
Voreinstellung
angezeigt.
Fortsetzung...
Deutsch - 41
BN68-01743A_00Ger.indd
41
2008/08/13
11:45:42
4. Einstellungen
Das Men umfasst die 8 folgenden Untermens:
Mentransparenz, Kindersicherung, Untertitel, Untertitelmodus,
Audioformat, Digitaltext, Zeitzone, und System.
4.1 Mentransparenz
Sie knnen die Transparenz des Mens einstellen.
Whlen Sie die erforderliche Option durch Drcken der
Taste oder (Hoch, Mittel, Gering oder Deckend)
aus, und drcken Sie dann die Taste ENTER/OK.
Einstellungen
Mentransparenz : Mittel
Kindersicherung
Untertitel : Ein
Untertitelmodus : Normal
Audioformat : PCM
Navig.
Eingabe
Zurck
Einstellungen
Mentransparenz : Mittel
Hoch
Kindersicherung Mittel
Gering
Untertitel : Ein
Deckend
Untertitelmodus : Normal
Audioformat : PCM
Navig.
Eingabe
Zurck
4.2 Kindersicherung
Mit dieser Funktion knnen Sie nicht autorisierte Benutzer, z.B.
Einstellungen
Kinder, daran hindern, ungeeignete Programme anzuschauen.
Mentransparenz : Mittel
Fortsetzung...
Deutsch - 42
BN68-01743A_00Ger.indd
42
2008/08/13
11:45:44
Einstellungen
4.3 Untertitel / Untertitelmodus / Audioformat / Digitaltext
Sie knnen verschiedene Einstellungen gem Ihrem
Mentransparenz : Mittel
Audioformat
Untertitel : Ein
Dieses Men ist nur aktiv, wenn Sie ein Land whlen, fr
Digitaltext
Zeitzone
das Zeitzonen untersttzt werden.
System
Navig.
Eingabe
Zurck
Fortsetzung...
Deutsch - 43
BN68-01743A_00Ger.indd
43
2008/08/13
11:45:45
4.5 System
Das Men umfasst die 5 folgenden Untermens:
Produktinformation, Signalinformation, Software-Update,
Common Interface, und Reset.
Produktinformation
Sie knnen Informationen ber Ihr Produkt anzeigen. Sollten
Sie Service- oder Reparaturleistungen bentigen, wenden
Sie sich bitte an einen offiziellen Hndler fr SamsungProdukte.
Drcken Sie die Taste ENTER/OK, whrend
Produktinformation ausgewhlt ist. Das Men mit den
Produktinformationen wird angezeigt.
Software-Version / Firmware-Version
Signalinformation
Sie knnen Informationen ber den Signalstatus erhalten.
Drcken Sie die Taste ENTER/OK, whrend
Signalinformation ausgewhlt ist. Die technischen
Informationen fr den Signalstatus werden angezeigt.
SERVICE / Dienst-ID / Multiplex / Netz /
Bitfehlerrate / Signalstrke
Software-Update (Option)
Damit Ihr Produkt stets mit den neuesten Funktionen
des Digitalfernsehens ausgerstet ist, werden
zusammen mit dem normalen TV-Signal regelmig
Softwareaktualisierungen bertragen. Das Gert erkennt
diese Signale automatisch und zeigt einen Hinweis auf
die Softwareaktualisierung an. Sie haben die Wahl, ob die
Aktualisierung installiert werden soll.
Softwareinformationen
Damit die aktuelle Softwareversion angezeigt wird,
drcken Sie die Taste ENTER/OK. Zum Anzeigen von
Informationen zur Softwareversion drcken Sie erneut
die Taste ENTER/OK.
Handbuchaktualisierung
Drcken Sie die Taste ENTER/OK, um auf den aktuellen
Sendekanlen nach neuer Software zu suchen.
Upgrade im Standbymodus: Ein/Aus
Drcken Sie die Taste ENTER/OK. Um die
Softwareaktualisierung bei eingeschalteter
Netzversorgung fortzusetzen, whlen Sie mit den Tasten
oder die Option Ein aus.
45 Minuten nach Beginn des Standbymodus wird die
manuelle Aktualisierung automatisch ausgefhrt. Da
intern die Stromversorgung fr das Gert eingeschaltet
ist, kann der Plasmabildschirm leicht beleuchtet sein.
Dieser Zustand kann etwas mehr als eine Stunde
andauern, bis die Softwareaktualisierung abgeschlossen ist.
Einstellungen
Digitaltext
Zeitzone
System
Navig.
Eingabe
Zurck
System
Produktinformation
Signalinformation
Software-Update
Common Interface
Reset
Navig.
Eingabe
Zurck
Produktinformation
Software-Version: T_BDXPDEU00_0710
Firmware-Version: T_STDEU7_102c
Zurck
Signalinformation
SERVICE: ?
Dienst-ID: 0000
Multiplex: ? (TSID 0000,ONID 0000)
Netz: ? (ID 0000)
Bitfehlerrate:
10
Signalstrke:
0
Zurck
Software-Update
Softwareinformationen
Handbuchaktualisierung
Navig.
Eingabe
Zurck
Fortsetzung...
Deutsch - 44
BN68-01743A_00Ger.indd
44
2008/08/13
11:45:46
Anwendungsinformationen
Common Interface
Installieren der CI-Karte
Typ: CA
a. Sie knnen das CI-CAM-Modul bei Ihrem nchsten
Hersteller: Canal Plus
Hndler oder durch telefonische Bestellung erwerben.
Info: Top Up TV
b. Schieben Sie die CI-Karte in Richtung des Pfeils in
das CAM-Modul ein, bis sie fest sitzt.
c. Schieben Sie das CAM-Modul mit installierter CIKarte in den Schlitz fr die gemeinsame Schnittstelle
Zurck
hinein.
CI-Men
Schieben Sie das CAM-Modul in Pfeilrichtung
bis zum Anschlag, sodass es parallel mit dem
Schlitz ist.
d. Kontrollieren Sie, ob Sie ein Bild sehen oder ein
gestrtes Signal.
Sie knnen das CAM-Modul unabhngig davon
anschlieen, ob das Fernsehgert angeschaltet
ist oder nicht.
Navig.
Eingabe
Beenden(Ende)
Anwendungsinformationen.
Die folgenden Erklrungen gelten fr den Fall, dass ein CAM-Modul in den CI-Schlitz gesteckt
ist und angezeigt wird.
Drcken Sie die Taste ENTER/OK, um Informationen ber Ihre Anwendung anzuzeigen.
CI-Men
Hiermit trifft der Benutzer seine Auswahl in dem vom CAM-Modul bereitgestellten
Men.
Drcken Sie die Taste ENTER/OK. Es werden die Optionen des ausgewhlten Mens
angezeigt.
Whlen Sie mit den Tasten oder die gewnschte Option, und drcken Sie dann die
Taste ENTER/OK.
Whlen Sie das CI-Men ausgehend vom Men PC-Karte.
Reset
Reset
Sie knnen alle gespeicherten Werte wieder auf die
Ausgangswerte zurcksetzen.
ACHTUNG: Alle Kanaleinstellungen und
Benutzervoreinstellungen gehen verloren
Beim Zurcksetzen werden alle Kanalinformationen
und werden auf die Werkseinstellungen
sowie die Einstellungen des Benutzers wieder auf die
zurckgesetzt. Ein Zurcksetzen sollte
Ausgangswerte zurckgesetzt.
nur dann durchgefhrt werden, wenn
schwerwiegende Probleme aufgetreten sind.
Drcken Sie die Taste ENTER/OK, whrend Reset
ausgewhlt ist. Der Bildschirm PIN eingeben wird
angezeigt.
Zurck
Geben Sie Ihre aktuelle vierstellige PIN ber die
Zifferntasten (0 ~ 9) ein. Ein Warnhinweis wird
angezeigt. Sie setzen smtliche Werte wieder zurck,
indem Sie nacheinander die farbigen Tasten drcken
(rot, grn, gelb und blau).
Der Standard-PIN-Code eines neuen Fernsehgerts
lautet 0000.
Wenn die PIN der Kindersicherung gendert wird, wird auch die PIN zum Zurcksetzen
automatisch gendert.
Nach Abschluss des Reset fhrt das Gert DTV Plug & Play aus (Automatisches Speichern
mit DTV, Zeitzone anhngig vom Land, Zeiteinstellung) und beendet den Modus fr
Digitalfernsehen, ohne zum Analogfernsehen zu wechseln. (Informationen hierzu finden Sie
auf Seite 11.)
Deutsch - 45
BN68-01743A_00Ger.indd
45
2008/08/13
11:45:47
Anynet+-Gert 1
HDMI-Kabel
Anynet+-Gert 2
HDMI-Kabel
Anynet+-Gert 3
HDMI-Kabel
TV
Anynet+-Gert 1
HDMI-Kabel
Heimkinosystem
HDMI-Kabel
Anynet+-Gert 2
HDMI-Kabel
Anynet+-Gert 3
HDMI-Kabel
Optisches Kabel
Verbinden Sie den (optischen) digitalen Audioausgang am Fernsehgert und den digitalen
Audioeingang
des Receivers ausschlielich mit Hilfe eines Glasfaserkabels.
Schlieen Sie nur einen Receiver an.
die Lautsprecher des Heimkinosystems knnen Sie 5.1-Klang genieen. Anderenfalls knnen
ber
Sie den Ton nur in 2-Kanal-Stereo wiedergeben. Damit Sie den Fernsehton ber das Heimkinosystem
wiedergeben knnen, mssen Sie den digitalen Audio-Eingang (optisch) des Heimkinosystems korrekt
mit dem Fernsehgert verbinden. Sie knnen den Ton vom BD-Recorder, der ber das Fernsehgert
an das Heimkinosystem gesendet wird, nicht in 5.1-Qualitt hren, weil das Fernsehgert nur
Stereoton untersttzt. Einzelheiten entnehmen Sie dem Handbuch fr das Heimkinosystem.
Sie knnen Anynet+-Gerte mithilfe eines HDMI-Kabels verbinden. Einige HDMI-Kabel untersttzen
mglicherweise keine Anynet+-Funktionen.
Schlieen Sie alle Videokabel an das Fernsehgert an. Anynet+ arbeitet, wenn das AV-Gert, das
Anynet+ untersttzt, im Standby-Modus oder angeschaltet ist.
Anynet+ untersttzt maximal 8 AV-Gerte.
Deutsch - 46
BN68-01743A_00Ger.indd
46
2008/08/13
11:45:48
TV
P1
Fernsehen
Gert auswhlen
Aufnehmen
Men im Gert
Gertebetrieb
Empfnger : Aus
Einstellungen
Navig.
Beenden
Eingabe
Einstellungen
Anynet+ (HDMI-CEC)
: OffAus
Autom. Ausschalten
: OffEin
Gertesuche
Whlen Sie ein bestimmtes Gert durch Drcken der Tasten oder
DVDR2
, und drcken Sie dann die Taste ENTER/OK.
DVD1
Aufnehmen
DVD2
Das System wechselt zum ausgewhlten Gert.
Men im Gert
Wenn Sie das gewnschte Gert nicht finden knnen, drcken Sie
Gertebetrieb
Die zum Suchen nach Gerten erforderliche Zeit hngt von der
Autom. Ausschalten
: Ein
BN68-01743A_00Ger.indd
47
2008/08/13
11:45:49
Anynet+-Men
Der Inhalt des Anynet+-Mens hngt vom Typ und Status der an das Fernsehgert
angeschlossenen Anynet+-Gerte ab.
Anynet+-Men
Beschreibung
Fernsehen
Gert auswhlen
Aufnehmen
Men im Gert
Gertebetrieb
Empfnger
Einstellungen
Betriebsstatus
Verfgbare Tasten
Zifferntasten
////ENTER tasten
Farbige Tasten
Taste EXIT
(Rckwrts suchen)
(Vorwrts suchen)
(Stopp)
(Wiedergabe/Pause)
Gert mit
eingebautem Tuner
CH /-Taste
Audiogert
Anynet+-Gert
Anynet+-Funktionen knnen nur verwendet werden, wenn die Fernbedienung auf TV gestellt ist.
Die
Taste REC funktioniert nur im Aufnahmemodus.
Die
Sie knnen Anynet+-Gerte nicht mit den Tasten seitlich an Ihrem Fernsehgert bedienen. Sie
knnen
Anynet+-Gerte nur mit der TV-Fernbedienung steuern.
TV-Fernbedienung funktioniert unter bestimmten Umstnden nicht. Whlen Sie in diesem Fall
Die
das Anynet+-Gert nochmals aus.
Anynet+-Modus funktionieren die Farbtasten mglicherweise nicht ordnungsgem.
Im
Die Funktionen der Tasten , knnen je nach Gert unterschiedlich sein.
Aufnehmen
Sie knnen Fernsehprogramme mit einem Recorder aufnehmen.
Drcken Sie die REC-Taste .
Die Aufnahme beginnt. Aber nur, wenn ein Anynet+-fhiges Aufnahmegert angeschlossen ist.
Im Fernsehmodus wird das aktuelle Fernsehprogramm aufgenommen. Wenn Sie Bilder aus einer
anderen Signalquelle anzeigen, wird das Videosignal aus dieser Quelle aufgenommen.
Sie knnen das Signal der jeweiligen Quelle aufnehmen. Whlen Sie hierzu Aufnahme, nachdem
Sie die Anynet+-Taste gedrckt haben.
berprfen Sie vor der Aufnahme, ob der Antennenstecker ordnungsgem am Aufnahmegert
angeschlossen ist. Informationen zur Antennenverbindung mit dem Aufnahmegert finden Sie im
Benutzerhandbuch zur Antennenverbindung.
Deutsch - 48
BN68-01743A_00Ger.indd
48
2008/08/13
11:45:49
Gert auswhlen
drcken Sie dann die Taste ENTER/OK.
Aufnehmen
Sie knnen jetzt Ton mit dem Receiver wiedergeben.
Men im Gert
Gertebetrieb
Wenn der Receiver angeschaltet ist, erfolgt die Tonwiedergabe durch
Empfnger : Ein
den 2-Kanal-Receiver.
Einstellungen
Prfen Sie Folgendes, bevor Sie sich an den Service wenden
Problem
Anynet+ funktioniert
nicht.
Lsung
Prfen Sie, ob es sich um ein Anynet+-Gert handelt. Das Anynet+-System untersttzt
nur Anynet+-fhige Gerte.
Schlieen Sie nur einen Receiver an.
Prfen Sie, ob das Netzkabel des Anynet+-Gerts richtig angeschlossen ist.
Prfen Sie die Video/Audio/HDMI-Kabelverbindungen des Anynet+-Gerts.
Prfen Sie, ob Anynet+ (HDMI-CEC) im Men Einstellungen von Anynet+ auf An
eingestellt ist.
berprfen Sie, ob die Fernbedienung im TV-Modus arbeitet.
Prfen Sie, ob es sich um eine ausschlieelich fr Anynet+ geeignete Fernbedienung handelt.
Anynet+ funktioniert unter bestimmten Umstnden nicht. (Kanalsuche)
Stellen Sie nach dem Anschlieen oder Entfernen des HDMI-Kabels sicher, dass die
Gerte wieder gesucht werden, oder starten Sie das TV-Gert erneut.
berprfen Sie, ob die Funktion Anynet+ des Anynet+-Gerts eingeschaltet ist.
Prfen Sie, ob das Anynet+-Gert ordnungsgem an das Fernsehgert angeschlossen
ist, und kontrollieren Sie zudem, ob Anynet+ (HDMI-CEC) im Men Anynet+ Setup
(Einstellungen fr Anynet+) aktiviert ist.
Drcken Sie die Taste TV auf der TV-Fernbedienung, um zu TV zu wechseln. Drcken
Sie dann die Anynet+-Taste, um das Anynet+-Men anzuzeigen und die gewnschte
Menoption auszuwhlen.
Whlen Sie im Anynet+-Men die Option Fernsehen.
Drcken Sie die Taste SOURCE auf der TV-Fernbedienung, und whlen Sie ein Gert,
bei dem es sich nicht um ein Anynet+-Gert handelt.
Drcken Sie auf eine der Tasten CH, CH LIST, PRE-CH, um in den TV-Modus zu
wechseln. (Beachten Sie, dass die Kanaltaste nur funktioniert, wenn kein Anynet+-Gert
mit integriertem Tuner angeschlossen ist.)
Sie knnen die Fernbedienung nicht verwenden, whrend Sie Anynet+ konfigurieren,
oder in einen anderen Anzeigemodus wechseln.
Verwenden Sie die Fernbedienung, wenn das Konfigurieren von Anynet+ oder das
ndern des Anzeigemodus abgeschlossen ist.
Die Wiedergabefunktion kann nicht verwendet werden, wenn der Plug & Play-Vorgang luft.
Das Fernsehprogramm
kann nicht aufgezeichnet
werden.
Die Ausgabe des
Fernsehtons erfolgt
ber den Receiver.
BN68-01743A_00Ger.indd
49
2008/08/13
11:45:49
Videotext-Funktion (modellabhngig)
Die meisten Fernsehsender bieten Informationen per Videotext
an. Auf der Videotext-Indexseite finden Sie Verwendungshinweise
zum Videotext. Darber hinaus knnen Sie ber die Tasten der
Fernbedienung nach Bedarf verschiedene Optionen einstellen.
Fr die korrekte Anzeige von Videotextinformationen muss der
Senderempfang einwandfrei sein. Andernfalls knnen Informationen
unvollstndig sein oder einige Seiten nicht angezeigt werden.
1 TV/DTV
Videotextanzeige beenden (modellabhngig)
2
(Index)
Drcken Sie diese Taste, um die Videotext-Indexseite
(Inhaltsverzeichnis) anzuzeigen.
3
(Videotext anzeigen/Videotext und Fernsehsendung
zugleich anzeigen)
Drcken Sie diese Taste, um den Videotextmodus zu
aktivieren, nachdem Sie einen Sender ausgewhlt haben, der
Videotext anbietet. Drcken Sie die Taste zweimal, um die
Videotextinformationen gleichzeitig mit der aktuellen Sendung auf
dem Bildschirm einzublenden.
4
(Gre)
Drcken Sie diese Taste, um Videotext in doppelt so groen
Buchstaben in der oberen Hlfte des Bildschirms anzuzeigen.
Drcken Sie die Taste erneut, um den Text in der unteren Hlfte
des Bildschirms anzuzeigen.
Zum Ausblenden des Videotextes drcken Sie die Taste erneut.
5
(Modus)
Drcken Sie diese Taste, um den Videotextmodus auszuwhlen
(LISTE/FLOF).
Wenn Sie diese Taste im Modus LIST (Liste) drcken, wird in
den Listenspeichermodus umgeschaltet.Im Listenspeichermodus
knnen Sie mit der Taste Seite speichern Videotextseiten in einer
Liste
speichern.
6
(Untergeordnete Seite)
Drcken Sie diese Taste, um eine verfgbare untergeordnete Seite
anzuzeigen.
7
(Nchste Seite anzeigen)
Drcken Sie diese Taste, um die nchste Videotextseite anzuzeigen.
8
(Vorherige Seite anzeigen)
Drcken Sie diese Taste, um die vorherige Videotextseite anzuzeigen.
9
(Abbrechen)
Drcken Sie diese Taste, um beim Suchen nach einer Seite die Sendung anzuzeigen.
0
(Verborgenen Inhalt einblenden)
Drcken Sie diese Taste, um verborgenen Text anzuzeigen (z.B. Antworten bei Quizsendungen).
Drcken Sie die Taste erneut, um den Videotext auszublenden.
! Farbtasten (rot/grn/gelb/blau)
Wenn der Sender das FASTEXT-System verwendet, sind die verschiedenen Themen auf den
Videotextseiten farbig gekennzeichnet und knnen mit den Farbtasten auf der Fernbedienung angewhlt
werden. Drcken Sie die Farbtaste, die dem Thema entspricht, das Sie anzeigen mchten. Die Seite wird
mit anderen farbig markierten Informationen angezeigt, die auf dieselbe Art ausgewhlt werden knnen.
Drcken Sie die entsprechende Farbtaste, um die vorherige oder nchste Seite anzuzeigen.
@
(halten)
Drcken Sie diese Taste, um bei einer angezeigten Seite, die mit
weiteren, untergeordnete Seiten verknpft ist, das automatische
Umblttern zu verhindern. Drcken Sie zum Fortfahren die Taste erneut.
#
(Speichern)
Drcken Sie diese Taste, um Videotextseiten zu speichern.
knnen die Videotextseiten durch Drcken der Zifferntasten auf
Sie
der Fernbedienung wechseln.
Deutsch - 50
BN68-01743A_00Ger.indd
50
Fortsetzung...
2008/08/13
11:45:51
Inhalt
Gewhlte Seitennummer
Senderkennung
Aktuelle Seitenzahl oder Suchhinweise
Datum und Uhrzeit
Text
Statusinformation
FASTEXT-Informationen
1
2
Befestigen Sie die Wandhalterung mit einem Anzugsmoment von maximal 15kgfcm. Denken Sie
daran, dass Bauteile bei einem hheren Anzugsmoment beschdigt werden knnen.
Zum Zubehrsatz gehrt ein Haltering [] zum Befestigen der Wandhalterungen von Drittanbietern
am Samsung-Fernseher. (Fall B)
Deutsch - 51
BN68-01743A_00Ger.indd
51
2008/08/13
11:45:52
Produktfamilie
LCD-Fernsehgert
Plasmabildschirm
Zoll
VESA-Spezifikation (A * B)
Standardschraube
23 ~ 26
200 * 100
M4
32 ~ 40
200 * 200
M6
46 ~ 52
600 * 400
57
700 * 400
(Ohne VESA)
57 ~ 70
800 * 400
80 ~
1400 * 800
42 ~ 50
600 * 400
55 ~ 70
800 * 400
63
Ohne VESA
80 ~
1400 * 800
Menge
4
M8
4
M8
6
4
von uns empfohlenen Standardabmessungen der Wandhalterung finden Sie in der obigen Tabelle.
Die
Kauf unserer Wandhalterung erhalten Sie ein detailliertes Installationshandbuch sowie alle fr
Beim
die Montage erforderlichen Teile.
Sie keine Schrauben, die lnger sind als hier angegeben, da damit innen liegende
Verwenden
Bauteile des Fernsehers beschdigt werden knnen.
Wandhalterungen, die nicht der VESA-Standardspezifikation fr Schrauben entsprechen, kann
Bei
die Lnge der Schrauben je nach Spezifikation unterschiedlich sein.
Sie keine Schrauben, die nicht der VESA-Standardspezifikation fr Schrauben
Verwenden
entsprechen. Ziehen Sie die Schrauben nicht zu fest an, weil Sie so das Produkt beschdigen
knnten oder das Produkt dadurch herunterfallen knnte, was zu Verletzungen fhren kann.
Samsung haftet nicht bei derartigen Unfllen.
Samsung haftet nicht fr Gerteschden oder Verletzungen, wenn eine Wandhalterung verwendet
wird, die nicht dem VESA-Standard entspricht oder nicht spezifiziert ist, oder wenn der Verbraucher
die Installationsanleitung fr das Produkt nicht befolgt.
Unsere 57- und 63-Zoll-Modelle entsprechen nicht der VESA-Spezifikation. Verwenden Sie fr dieses
Modell deshalb unseren speziellen Wandmontagesatz.
Bei der Montage dieses Fernsehgerts drfen Sie eine Neigung von 15 Grad nicht berschreiten.
Installieren Sie die Wandhalterung nicht bei angeschaltetem Fernsehgert.
Sie
knnten dabei einen Stromschlag erhalten und sich verletzen.
Deutsch - 52
BN68-01743A_00Ger.indd
52
2008/08/13
11:45:53
Fortsetzung...
Deutsch - 53
BN68-01743A_00Ger.indd
53
2008/08/13
11:45:54
Fortsetzung...
Deutsch - 54
BN68-01743A_00Ger.indd
54
2008/08/13
11:45:55
Fernbedienungscodes
VCR
Marke
SAMSUNG
ADMIRAL
AIWA
AKAI
AUDIO DYNAMICS
BELL&HOWELL
BROKSONIC
CANDLE
CANON
CITIZEN
COLORTYME
CRAIG
CURTIS MATHES
DAEWOO
DB
DIMENSIA
DYNATECH
ELECTROHOME
EMERSON
FISHER
FUNAI
GENERAL ELECTRIC
GO VIDEO
LG (Goldstar)
HARMAN KARDON
HITACHI
INSTANT REPLAY
JC PENNEY
JCL
KENWOOD
KLH
LIOYD
LOGIK
LXI
JVC
MAGNAVOX
MARANTZ
MARTA
KONIA
ORION
MEI
MEMOREX
MGA
MIDLAND
MINOLTA
Code
000 001 002 003 004 005 077 078 079
020
025
004 027 032
007 026
018
022
002 003 006 008 015 055
021 056
002 003 006 008 015 055
007
002 024
002 007 008 017 021 025 056 064 066
003 010 011 012 013 014 015 016
007 026
017
025
034
001 003 006 021 022 025 030 032 034
040 047 050 052 060 063 065 066 067
069 073
018 024 028 029 048 051 061
025
002 005 017 021 056
002
006 007 008 009 010
007
019 025 041 042 074
021
002 007 018 019 021 026 037 041
054 056
007 008 018 021 026 037
007 008 018 026 037
070
025
038
025
081 082 083
021 056 059
007 008 018 021 026 037 062
006
036
073 074 075 076
021
006 021 024 025
034
005
019 041 075
Marke
MITSUBISHI
MONTGOMERY WARD
MTC
MULTITECH
NEC
OPTIMUS
PANASONIC
PENTAX
PENTEX RESEARCH+
PHILCO
PHILIPS
PIONEER
PORTLAND
PROSCAN
QUARTZ
QUASAR
RADIO SHACK/
REALISTIC
RCA
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHIMTOM
SIGNATURE
SONY
SYLVANIA
SYMPHONIC
TANDY
TASHIKA
TATUNG
TEAC
TECHNICS
TEKNIKA
TMK
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
YAMAHA
ZENITH
Code
019 034 041 046
020
002 025
002 005 025 038
007 008 018 026 037 062 064
020
021 056 071 072
019 041 075
008
021 056 059
021 080
019 026 039 053
015 049 055
017
018
021 056
006 018 020 021 024 025 029 034
048 056
002 017 019 021 035 041 043 057
068 076
026
018 024
003 047 052 067
006 018 019 024 028 029 041 048 051
020 034 045 015
027 033 038 058
025
027 033 044
021 025 056 059
025
018 025
006
037
025 037 068
021
006 021 025 031
066
003 019 029 051 052
002 006
002
007 026
026
007 026
002
002 003 006 019 020 021 024 025 034
038 041
007 008 018 026 037
023 027 033
Fortsetzung...
Deutsch - 55
BN68-01743A_00Ger.indd
55
2008/08/13
11:45:56
KABELRECEIVER
Marke
SAMSUNG
GI
HAMLIN
HITACHI
JERROLD
MACOM
MAGNAVOX
OAK
PANASONIC
PHILIPS
PIONEER
RCA
REGAL
Code
000 001 002 003 004 005 006 007
041
003 024 031
025 030
038 039
025 030
019 023 028
026
003 022 027 037 044
019 021 023 028
004 018 020 044
014 022 040
003
Marke
REGENCY
SA
SCIENTIFIC ATLAN
SPRUCER
STARGATE 2000
SYLVANIA
TEXSCAN
TOCOM
UNIVERSAL
VIEWSTAR
WARNER AMEX
ZENITH
Code
015 023
042 043
042 043
022
036
016
016
032
033 034
019 021 023 028
046
017 029 035 037 045
SAMSUNG SET-TOP-BOX
Produkt
Ground wave STB
CABLE STB
Satellite STB
Code
000 001 002 008 013
000 004 008 013
000 003 008 013
SET-TOP BOX
Marke
ALPHASTAR
ANAM
CHANNEL MASTER
CROSSDIGITAL
CHAPARRAL
DIRECT TV
DAEWOO
DISH NETWORK SYSTEM
DISHPRO
DRAKE
DX ANTENNA
ECHOSTAR
EXPRESSVU
GOI
GE
GENERAL INSTRUMENT
HTS
HOME CABLE
HITACHI
HUGHES NETWORK
IQ
IQ PRISM
JANEIL
JERROID
JVC
Code
023
043
018 034
019
035
015 016 017 019 022 045 060
061 062 065 066 067 068
074
069 070
069
018 024 032
027
025 069 070 071
069
069
065
046 047 048 063 064
069
056
022
015 017
020
020
059
063
069 070
Marke
LG (Goldstar)
MAGNAVOX
MEMOREX
MOTOROLA
MACOM
MITSUBISHI
NEXT LEVEL
PHILIPS
PRIMESTAR
PANASONIC
PAYSAT
PROSCAN
RCA
RADIOSHACK
REALISTIC
STS
STAR TRAK
SKY
SKY LIFE
SHACK
STAR CHOICE
SONY
TOSHIBA
ULTIMATE TV
UNIDEN
ZENITH
Code
044 073
016 021 036 038 039 040 041 042
016
064
018
015
047 048 064
015 016 017 021 033 036 038 039
040 041 042 067
046 049 050 063
058 059 061 062
016
065 066
051 052 053 065 066
064
057
020 027
026
031
005 006 007
064
064
054 060
015 017 028 029 030 072
060 066
016 021 037 055 056 057
024 031 068
Fortsetzung...
Deutsch - 56
BN68-01743A_00Ger.indd
56
2008/08/13
11:45:56
SAMSUNG DVD
Produkt
DVD
DVDR
BD-Recorder
VCR COMBO
VCR-Recorder
DHR COMBO
Code
000 001 002
003 004
005 006
007 008 009 010 011
012
013
Produkt
Home Theater VCR COMBO
HDD RecorderKombi
TWIN TRAY COMBO
STB DVD COMBO
DVD-Receiver
AV-Receiver
Code
014 015 016
017
018
019
020
021
DVD
Marke
ANAM
AUDIOVOX
AUDIOLOGIC
ANABA
APEX DIGITAL
AIWA
BROKSONIC
BLAUPUNKT
B&K
CURTIS MATHES
CYBER HOME
CLARION
CIRRUS
CINEVISION
DAEWOO
DENON
FARENHEIT
FISHER
GPX
GO VIDEO
GE
GREENHILL
HITACHI
HITEKER
HOYO
HARMAN / KARDON
IRT
INTEGRA
JBL
JVC
JATON
KENWOOD
KISS
KONKA
KLH
LG (Goldstar)
LOEWE
LASONIC
MOBILE AUTHORITY
MEMOREX
MALATA
MAGNAVOX
MINTEK
MONYKA
Code
030
075
085
072
070 071 074 086 083 084 088
111 112
114
062
074
122 123
027
065 077 078 079 082
080 125
081
095
066
146
067 068
090
060
061 089 133 135
069 074
074
064 113
071
073
091 110
089
092
091
022 033 115 116
073
051 108 109
073
059 100 106 107
074 075
025 031
057
058
054
055
056
076 093
074 094
073
Marke
NORCENT
NEXT BASE
NEC
NANTAUS
NESA
OPTOMEDIA ELECTRONICS
OPTIVIEW
ONKYO
PHILCO
PRINCETON
PROSCAN
PANASONIC
PHILIPS
ROTEL
RIO
RCA
RAITE
ROWA
SAMPO
SONY
SHERWOOD
SVA
SYLVANIA
SHARP
SANSUI
SANYO
SHINSONIC
SANYO
THOMSON
TOSHIBA
TECHNICS
TVIEW
TOKAI
TEAC
TECHWOOD
TREDEX
URBAN CONCEPTS
VENTURER
VOCOPRO
YAMAHA
YAMAKAWA
XWAVE
ZENITH
Code
048 049 050
052
053
144
074
105
072
076 092 119
044 045
046 047
023
024 034 124 134 136 137 138
036 076
117 118
120
023 035 074 075 131 132
073
038
104
026 029 126 127 128 129
130 141
039 041
042
043 093
140
062
062
094
090
145
028 062 076
139
072
073
096
097
098 099 101
076
075
102
032 063
040 073
103
076 121
Deutsch - 57
BN68-01743A_00Ger.indd
57
2008/08/13
11:45:56
Problembehandlung
Bevor Sie sich ber Ihren Fachhndler an den Kundendienst von Samsung wenden, fhren Sie
bitte die nachstehend beschriebenen einfachen Manahmen durch.
Wenn Sie das Problem nicht anhand der angegebenen Hinweise lsen knnen, notieren Sie
Modell- und Seriennummer des Fernsehgerts, und wenden Sie sich an Ihren Fachhndler.
Kein Ton oder Bild
Stellen Sie sicher, dass das Netzkabel an eine Steckdose angeschlossen ist.
Stellen Sie sicher, dass Sie die Netztaste (Ein/Aus) am vorderen Bedienfeld gedrckt haben, oder
drcken Sie die Taste POWER auf der Fernbedienung.
berprfen Sie die Einstellungen fr Kontrast und Helligkeit.
Kontrollieren Sie die Lautstrke.
berprfen Sie, ob Int. Ton aus auf EIN gestellt ist.
Normales Bild, aber kein Ton
Kontrollieren Sie die Lautstrke.
berprfen Sie, ob die Taste Stumm auf der Fernbedienung gedrckt wurde.
Kein Bild oder nur schwarzweies Bild
ndern Sie die Farbeinstellungen.
Stellen Sie sicher, dass die korrekte Fernsehnorm ausgewhlt ist.
Ton- und Bildstrungen
Suchen Sie das elektrische Gert, das die Strungen am Fernsehgert verursacht, und stellen Sie es
in einem greren Abstand auf.
Schlieen Sie das Fernsehgert an eine andere Steckdose an.
Verzerrtes oder verschneites Bild, verzerrter Ton
berprfen Sie Ausrichtung, Standort und Anschlsse der Antenne.
Interferenzen werden oft durch Zimmerantennen verursacht.
Fernbedienung funktioniert nicht richtig
Tauschen Sie die Batterien der Fernbedienung aus.
Reinigen Sie die Vorderseite der Fernbedienung (dort befindet sich der Infrarotsender).
berprfen Sie, ob die Pole (+ und ) der Batterien wie im Batteriefach angezeigt ausgerichtet sind.
berprfen Sie, ob die Batterien mglicherweise leer sind.
Der Bildschirm ist schwarz und die Betriebsanzeige blinkt kontinuierlich.
berprfen Sie auf Ihrem Computer Stromversorgung und Signalkabel.
Das Fernsehgert befindet sich im Energiesparmodus.
Bewegen Sie die Maus des Computers, oder drcken Sie eine Taste auf der Tastatur.
berprfen Sie bei den Gerten (Set-Top-Box, DVD usw.) Stromversorgung und Signalkabel.
Das Fernsehgert befindet sich im Energiesparmodus.
Drcken Sie auf der Fernbedienung die Taste SOURCE.
Schaltet das Fernsehgert ein oder aus.
Das beschdigte Bild wird in der Ecke des Bildschirms angezeigt.
Wenn bei manchen externen Gerten Nur Scan gewhlt ist, erscheint das beschdigte Bild in der Ecke des
Bildschirms. Dieses Symptom ist auf das externe Gert und nicht auf das Fernsehgert zurckzufhren.
Deutsch - 58
BN68-01743A_00Ger.indd
58
2008/08/13
11:45:59
Technische Daten
Die Beschreibungen und Eigenschaften in diesem Handbuch werden nur zu Informationszwecken
herausgegeben und knnen ohne vorherige Ankndigung gendert werden.
Modell
PS42A417
Bildgre (Diagonal)
42 Zoll
Vertikal PC-Auflsung
Audio (Ausgang)
10 W x 2
Abmessungen (BxHxT)
Gehuse
Mit Fu
1055 x 700 x 95 mm
1055 x 759 x 316 mm
Gewicht
Gehuse
Mit Fu
31 kg
34 kg
Umgebungsbedingungen
Betriebstemperatur
Luftfeuchtigkeit (bei Betrieb)
Lagerungstemperatur
Luftfeuchtigkeit (Lagerung)
Deutsch - 59
BN68-01743A_00Ger.indd
59
2008/08/13
11:46:00
BN68-01743A_00Ger.indd
60
2008/08/13
11:46:01
Nederlands -
BN68-01743A-00Dut.indd
2008/08/13
11:47:35
Inhoud
Algemene informatie
Tijdskenmerken.............................................. 24
Taalkeuze / Blauw scherm / Melodie / Lichteffect /
Spaarstand / HDMI-zwartniveau.......................... 25
De spelmodus gebruiken............................... 26
Aanpassen van muurbevestiging
(apart verkrijgbaar)......................................... 27
Picture in Picture (PIP) activeren................... 28
Beveiliging tegen scherm doorbranden......... 29
Bediening
De televisie in- en uitschakelen....................... 9
Weergave van de menus.............................. 10
Plug & play-functie......................................... 10
Externe signaalbronnen bekijken................... 12
Toestelnamen aanpassen.............................. 13
Kanaalbeheer
Beeldbeheer
De beeldstandaard wijzigen........................... 18
Beeldinstellingen aanpassen......................... 18
Gedetailleerde beeldinstellingen
configureren................................................... 19
Beeldformaat selecteren................................ 20
De schermmodus selecteren......................... 20
Digitaal ruisfilter/Actieve kleuren/DNIe/
Film plus......................................................... 21
Het huidige beeld stilzetten............................ 21
Geluidsbeheer
Geluidskenmerken......................................... 22
De geluidsmodus selecteren
(afhankelijk van model).................................. 23
Symbolen
Indrukken
Software configureren
(gebaseerd op Windows XP)......................... 30
Invoermodus (PC).......................................... 31
De pc instellen............................................... 32
De thuisbioscoop-pc instellen........................ 33
Over Anynet+
Nederlandsc
Pc-scherm
Wat is Anynet+?............................................. 46
Anynet+-apparaten aansluiten....................... 46
Anynet+ instellen........................................... 47
Zoeken naar en schakelen tussen
Anynet+-apparaten........................................ 47
Opnemen....................................................... 48
Luisteren via een ontvanger........................... 49
Controleer het volgende voordat u
om service verzoekt....................................... 49
Appendix
Teletekstfunctie (afhankelijk van het model)...... 50
De montage van de muurbevestiging
voorbereiden.................................................. 51
Specificaties voor de muurbevestigingskit
(VESA)........................................................... 52
De afstandsbediening instellen...................... 53
De standaardvoet monteren
(afhankelijk van het model)............................ 58
Problemen oplossen...................................... 58
Specificaties................................................... 59
Belangrijk
Opmerking
Nederlands -
BN68-01743A-00Dut.indd
2008/08/13
11:47:35
Gebruikershandleiding
Afstandsbediening/
AAA-batterijen
Garantiekaart/
Veiligheidshandleiding
(Niet op alle plaatsen
beschikbaar)
Netsnoer
Ferrietkern voor
netsnoer
Doek-schoon
Ferrietkern
voor S-Video
Ferrietkern voor
koptelefoonkabel
Apart verkrijgbaar
S-Video-kabel
Antennekabel
Componentkabels
Audiokabels
Videokabel
Pc-kabel
SCART-kabel
Pc-audiokabel
HDMI-kabel
HDMI/DVI-kabel
Standaardvoet gebruiken
plasmascherm moet door
Het
twee of meer personen getild
-20 ~ 20
Nederlands -
BN68-01743A-00Dut.indd
2008/08/13
11:47:39
Configuratiescherm
Voor-(of zij)paneel
De vorm en kleur van het product kunnen, afhankelijk van het model, variren.
1 SOURCE
Toont een menu van alle beschikbare
ingangen (TV, Ext.1, Ext.2 , AV, S-Video,
Component, PC, HDMI1, HDMI2 , en DTV).
ENTER
Gebruik deze toets in het schermmenu zoals
u de toets ENTER op de afstandsbediening
gebruikt..
2 MENU
Druk hierop om een beeldmenu van de
functies van uw tv weer te geven.
Aan/uit-knop
Druk hierop om de tv in of uit te schakelen.
3 y+
Druk hierop om het volume hoger oflager
te zetten. In het schermmenu gebruikt u
deknoppen y+ op dezelfde manier als de
knoppen en op de afstandsbediening.
4
C/P.
Druk hierop om het kanaal te wijzigen. In het
schermmenu gebruikt u de knoppen
C/P.
op dezelfde manier als de
knoppen en op de afstandsbediening.
Aan/uit-lampje
Als de stroom is ingeschakeld, knippert het
lampje even om vervolgens uit te gaan. In de
stand-bymodus brandt het lampje.
Sensor voor afstandsbediening
Richt de afstandsbediening op dit punt van
de tv.
7 Luidspreker
Nederlands -
BN68-01743A-00Dut.indd
2008/08/13
11:47:41
Aansluitingspaneel
Zijpaneel
1
2
of
De vorm en kleur van het product kunnen, afhankelijk van het model, variren.
1 HDMI IN 3
Sluit aan op de HDMI-aansluiting van een
apparaat met HDMI-uitvoer.
2 S-VIDEO of VIDEO / AUDIO L/R
Video-(S-Video of Video) en audio-ingangen
voor externe apparaten, zoals een camcorder
of videorecorder.
3 Koptelefoonaansluiting
U kunt een koptelefoon op de tv aansluiten als
u naar een programma wilt kijken zonder de
andere aanwezigen in de kamer te storen.
Langdurig gebruik van een hoofdtelefoon
met een hoog volume kan het gehoor
beschadigen.
Achterpaneel
1
of
Kabeltelevisie
netwerk
8
of
De vorm en kleur van het product kunnen, afhankelijk van het model, variren.
Wanneer u een audio- of videosysteem op uw toestel aansluit, dient u alle apparaten uit te schakelen.
bij het aansluiten van een extern apparaat ervoor dat de kleuren van de aansluiting en de
Zorg
kabel overeenkomen.
Nederlands -
BN68-01743A-00Dut.indd
Wordt vervolgd...
2008/08/13
11:47:48
1 AANSLUITEN
Aansluiting voor het netsnoer.
2 Aansluiten op externe geluidsapparatuur
RCA-audiosignalen van de tv aansluiten op
een externe bron, zoals geluidsapparatuur.
3 EXT 1, EXT 2
Ingangen of uitgangen voor externe apparaten,
zoals een videorecorder, dvd-speler,
spelcomputer of videodiscspeler.
Specificaties voor de invoer/uitvoer
Aansluiting
Ingang
Video Audio (L/R) RGB
EXT 1
EXT 2
Uitgang
Video + audio (L/R)
Alleen de tv-of
DTV-uitgang is
beschikbaar.
Uitgang naar keuze.
4 COMPONENT IN
Audio (AUDIO L/R) en video (Y/PB/PR)
ingangen voor Component.
5 DIGITAL AUDIO OUT (OPTICAL)
Sluit een component voor digitale audio aan.
6 SERVICE
Aansluiting voor onderhoud.
Sluit de serile bus tussen de elektrisch
aanstuurbare muurbevestigingsbeugel en
uw tv aan wanneer u de weergavehoek
van de tv met uw afstandsbediening wilt
aanpassen.
7 PC IN / AUDIO
Aansluiting voor de video- en audio-uitvoer van
de computer.
8 Sleuf voor ALGEMENE INTERFACE
Plaats de CI-kaart (Common Interface of
Algemene Interface) in de sleuf. (Zie pagina 45.)
Wanneer u bij sommige kanalen geen
CI-kaart hebt geplaatst, wordt Vervormd
signaal op het scherm weergegeven.
De koppelingsgegevens met een
telefoonnummer, de ID van de CI-kaart,
de host-ID en andere informatie worden
gedurende 2~3 minuten weergegeven.
Neem contact op met uw serviceprovider als
er een foutbericht wordt weergegeven.
Wanneer de kanaalgegevenszijn
geconfigureerd, wordt het bericht Update
voltooid weergegeven. Hiermee wordt
aangegeven dat de kanaallijst nu is
bijgewerkt.
Plaats de CI-kaart in de richting die op de
kaart staat gemarkeerd.
9 HDMI IN 1, HDMI IN 2
Sluit aan op de HDMI-aansluiting van
een apparaat met HDMI-uitvoer. Deze
ingangen kunnen ook worden gebruikt
als DVI-verbinding met aparte analoge
audio-ingangen. U heeft een extra HDMI/DVI-kabel nodig voor het maken van deze
verbinding. Wanneer u de optionele HDMI/DVI-adapter gebruikt, kunt u via de analoge
DVI audio-ingangen op uw tv het geluid uit
de linker- en rechter audiouitgangen van
uw DVI-apparaat ontvangen. (Niet geschikt
voor de pc)
Wanneer u dit product via HDMI of DVI
aansluit op bijvoorbeeld een settopbox,
dvd-speler of spelcomputer, moet u ervoor
zorgen dat het is ingesteld op een passende
stand voor het videosignaal, zoals in de
onderstaande tabel. Als u dit niet doet, kan
het beeld storen, gebroken zijn of zelfs
ontbreken.
Probeer de HDMI/DVI-aansluiting niet op
de grafische kaart van een pc of laptop
aan te sluiten. (Er zal dan een leeg scherm
weergegeven worden)
DVI IN (HDMI 2) AUDIO L/R
DVI-audio-uitgangen voor externe apparaten.
0 ANT IN
75 Coaxiale aansluiting voor antenne of
kabeltelevisienetwerk.
Ondersteunde modi voor HDMI en Component
HDMI/DVI 50 Hz
HDMI/DVI 60 Hz
Component
Nederlands -
BN68-01743A-00Dut.indd
2008/08/13
11:47:48
1 Aan/uit-knop
(hiermee wordt de tv in- en
uitgeschakeld)
2 Cijfertoetsen voor directe
kanaalkeuze
3 Kanaal kiezen met n of
twee cijfers
4 Knop voor het beheer van
de kanalen (zie pagina 15)
5 Hiermee selecteert u direct
de tv- en DTV-modus
6
Volume verhogen
Volume verlagen
7 Geluid tijdelijk uitschakelen
8 Geeft het hoofdmenu weer
9 Terug naar het vorige menu
@ Beeldformaat selecteren
# Elektronische
programmagids (EPG)
weergeven
$ Geluidsmodus selecteren
% Instellen van de
afstandsbediening
^ Hiermee selecteert u het
apparaat dat moet worden
bediend met de Samsungafstandsbediening (tv, dvdspeler, settopbox, kabel of
videorecorder).
& Druk op deze toets om
de achtergrondverlichting
voor de toets VOL en
CH en de toets voor de
actieve bron (TV, DVD,
CABLE, STB, VCR) op de
afstandsbediening in te
schakelen.
* Beschikbare bron selecteren
( Vorig kanaal
) DTV-menu weergeven
a Hiermee neemt u live
uitzendingen op
b VCR/DVD-functies;
(Terugspoelen, Stoppen,
Afspelen/Stilzetten,
Vooruitspoelen)
c
Volgend kanaal
Vorig kanaal
d Het schermmenu afsluiten
e Cursor besturen binnen het
menu
Nederlands -
BN68-01743A-00Dut.indd
2008/08/13
11:47:51
Nederlands -
BN68-01743A-00Dut.indd
2008/08/13
11:47:51
2
3
4
5
TV
Beeld
Modus
: Dynamisch
Contrast 100
Helderheid 45
Scherpte 75
Kleur
55
Tint
G 50
R 50
Kleur tint
: Koel1
Detailinstellingen
Meer
Verpl.
Enter
Sluiten
Enter
Terug
Verpl.
Espaol
Nederlands
Portugus
Enter
Oversl.
Verpl.
Thuis
Enter
Oversl.
Enter
Oversl.
Verpl.
Belgi
Frankrijk
Duitsland
Itali
Enter
Oversl.
Wordt vervolgd...
Nederlands - 10
BN68-01743A-00Dut.indd
10
2008/08/13
11:47:54
7
8
10
11
12
13
14
Wordt vervolgd...
Nederlands - 11
BN68-01743A-00Dut.indd
11
2008/08/13
11:47:55
Data
Jaar
01
15
2007
Uur
min
12
00
Instellen
Verpl.
Keuze
Oversl.
Veel kijkplezier
OK
TV
Instellingen
Spelmodus
: Uit
Blauw scherm
: Uit
Melodie
: Uit
PC
Thuisbioscoop-pc : Uit
Lichteffect
: Uit
Meer
Verpl.
Enter
Terug
TV
Invoer
Bronlijst
: TV
Naam wijzigen
Anynet+
Verpl.
TV
Enter
Terug
Bronlijst
TV
Ext.1
Ext.2
AV
S-Video
Component
PC
HDMI1
HDMI2
HDMI3
DTV
Verpl.
:
:
:
:
:
:
:
:
:
:
Enter
Terug
Nederlands - 12
BN68-01743A-00Dut.indd
12
2008/08/13
11:47:57
Toestelnamen aanpassen
U kunt de externe bron een naam geven.
1 Druk op de toets MENU om het menu weer te geven.
2 Druk op de toets of om Invoer te selecteren en druk
vervolgens op de toets ENTER/OK.
3 Druk op de toets of om Naam wijzigen te selecteren en
druk vervolgens op de toets ENTER/OK.
4 Druk op de toets of om de te wijzigen externe bron te
selecteren en druk vervolgens op de toets ENTER/OK.
5 Selecteer het gewenste apparaat door op de toets of te
drukken en druk vervolgens op de toets ENTER/OK.
Beschikbare toestelnamen: VCR, DVD, D-VHS, Cable STB,
HD STB, Satellite STB, AV Receiver, DVD Receiver, Game,
Camcorder, DVD Combo, DHR (DVD HDD Recorder), PC.
6 Druk op de toets EXIT om het menu te verlaten.
Wanneer een pc met een resolutie van 640 x 480 bij 60Hz
is aangesloten op de HDMI IN 1-poort, moet u de
HDMI1-modus op pc instellen in de Bronlijst van de
modus Invoer. Als de HDMI1-modus niet pc is, werkt het
mogelijk, afhankelijk van de tv-instelling.
Invoer
TV
Bronlijst
: TV
Naam wijzigen
Anynet+
Enter
Terug
Naam wijzigen
Ext.1
Ext.2
AV
S-Video
Component
PC
HDMI1
HDMI2
HDMI3
Verpl.
TV
:
: VCR
: DVD
: D-VHS
:
Kabel STB
:
HD STB
:
Satelliet STB
:
:
Verpl.
Enter
TV
Terug
Kanaal
Belgi
Land
: Nederland
Automatisch opslaan
Frankrijk
Handm. opslaan Duitsland
Kanaalbeheer
Itali
Sorteren
Nederland
Naam
Spanje
Fijnafstemming
LNA
: Uit
Verpl.
Enter
TV
Terug
Kanaal
Land
: Nederland
Automatisch opslaan
Handm. opslaan
Kanaalbeheer
Sorteren
Naam
Fijnafstemming
LNA
: Uit
Verpl.
Enter
Terug
Automatisch opslaan
P 1
--
40 MHz
0 %
Start
Enter
Terug
Nederlands - 13
BN68-01743A-00Dut.indd
13
2008/08/13
11:47:58
TV
Kanaal
Land
: Nederland
Automatisch opslaan
Handm. opslaan
Kanaalbeheer
Sorteren
Naam
Fijnafstemming
LNA
: Uit
TV
Verpl.
Enter
Terug
Handm. opslaan
Programma
Kleursysteem
Geluidssysteem
Kanaal
Zoeken
Opslaan
: P 1
: Auto
: BG
: C
4
: 63 MHz
: ?
Verpl.
Enter
Terug
Programma (Programmanummer dat aan een kanaal wordt
toegewezen)
Druk op de toets of tot u het juiste nummer vindt.
U kunt het kanaalnummer ook rechtstreeks selecteren door de cijferknoppen (0-9) in te
drukken.
Kleursysteem: Auto/PAL/SECAM/NTSC4.43
Druk op de toets of om de gewenste kleurennorm te selecteren.
Geluidssysteem: BG/DK/I/L
Druk op de toets of om de gewenste geluidsnorm te selecteren.
Kanaal (Als u het nummer weet van het kanaal dat u wilt opslaan)
Druk op de toets of om C (antennekanaal) of S (kabelkanaal) te selecteren.
Druk op de toets en vervolgens op de toets of om het gewenste nummer te selecteren.
U kunt het kanaalnummer ook rechtstreeks selecteren door de cijferknoppen (0-9) in te
drukken.
Als er geen geluid is of als het geluid is vervormd, selecteert u nogmaals de gewenste
geluidsstandaard.
Zoeken (Als u de kanaalnummers niet weet)
Druk op de toets of om het zoeken te starten.
De tuner scant het frequentiebereik totdat het eerste kanaal of het door u geselecteerde kanaal in
beeld komt.
Opslaan (Het kanaal en het bijbehorende programmanummer opslaan)
Selecteer OK door op de toets ENTER/OK te drukken.
Kanaalmodus
P (Programmamodus): Als u klaar bent met instellen, zijn de zendstations die u kunt ontvangen
toegewezen aan de positienummers P00 tot P99. In deze modus kunt u een kanaalnummer
selecteren door het positienummer in te toetsen.
C (Antennekanaalmodus): In deze modus kunt u een kanaal selecteren door het nummer in te
toetsen dat aan het zendstation is toegewezen.
S (Kabelkanaalmodus): In deze modus kunt u een kanaal selecteren door het nummer in te
toetsen dat aan het kabelkanaal is toegewezen.
Nederlands - 14
BN68-01743A-00Dut.indd
14
2008/08/13
11:47:59
TV
toevoegen.
1 Druk op de toets MENU om het menu weer te geven.
2 Druk op de toets of om Kanaal te selecteren en druk op
de toets ENTER/OK.
3 Druk op de toets of om Kanaalbeheer te selecteren en
druk op de toets ENTER/OK.
Kanalen toevoegen
Met Kanalenlijst kunt u kanalen toevoegen.
4
5
Kanaal
Land
: Nederland
Automatisch opslaan
Handm. opslaan
Kanaalbeheer
Sorteren
Naam
Fijnafstemming
LNA
: Uit
Verpl.
TV
Enter
Terug
Kanaalbeheer
Kanalenlijst
Kinderslot
: Uit
Kanalen vergrendelen
Door video en geluid uit te zetten kunt u met deze functie voorkomen dat
ongeautoriseerde gebruikers, zoals kinderen, ongepaste programmas
bekijken.
6
Verpl.
Enter
Terug
Kanalenlijst
P 1 C4
1 / 10
Prog.
0 C - 1 C 4
toets ENTER/OK.
Toevoegen
Vergrend.
9 Ga naar het veld ( ) door op de toetsen /// te drukken,
Verpl.
Enter
Terug
Pagina
selecteer een kanaal dat vergrendeld moet worden en druk op de toets
ENTER/OK.
Als u nogmaals op de knop ENTER/OK drukt, verdwijnt het symbool ( ) naast het kanaal en
wordt de kanaalvergrendeling geannuleerd.
Een blauw scherm wordt weergegeven wanneer het kinderslot is ingeschakeld.
10 Druk op de toets EXIT om het menu te verlaten.
Nederlands - 15
BN68-01743A-00Dut.indd
15
2008/08/13
11:48:01
TV
Kanaal
Land
: Nederland
Automatisch opslaan
Handm. opslaan
Kanaalbeheer
Sorteren
Naam
Fijnafstemming
LNA
: Uit
Verpl.
TV
Enter
Terug
Sorteren
Prog.
0
1
2
3
4
Kanaal Naam
C
C76
C5
C6
C7
Verpl.
TV
Enter
Terug
Kanaal
Land
: Nederland
Automatisch opslaan
Handm. opslaan
Kanaalbeheer
Sorteren
Naam
Fijnafstemming
LNA
: Uit
Verpl.
TV
Enter
Terug
Naam
Prog.
0
1
2
3
4
Kanaal
C
C76
C5
C6
C7
Verpl.
Enter
Naam
Terug
Nederlands - 16
BN68-01743A-00Dut.indd
16
2008/08/13
11:48:02
TV
Kanaal
Land
: Nederland
Automatisch opslaan
Handm. opslaan
Kanaalbeheer
Sorteren
Naam
Fijnafstemming
LNA
: Uit
Verpl.
Enter
Terug
Fijnafstemming
P 1
+3
Reset
Instellen
Opslaan
Terug
P 1*
Mono
Beeld
Geluid
SRS TS XT
:
: Dynamisch
: Aangepast
: Uit
Sorteren
inkomende signaal.
Naam
Fijnafstemming
Nederlands - 17
BN68-01743A-00Dut.indd
17
2008/08/13
11:48:03
De beeldstandaard wijzigen
U kunt het beeld selecteren dat het beste overeenkomt met
uw wensen.
1 Druk op de toets MENU om het menu weer te geven.
2 Druk op de toets ENTER/OK om Beeld te selecteren.
3 Druk op de toets ENTER/OK om Modus te selecteren.
4 Selecteer de gewenste modus door op de toets of te
drukken en druk vervolgens op de toets ENTER/OK.
Beschikbare modi: Dynamisch, Standaard, Film
De waarden van de instellingen kunnen variren
afhankelijk van de ingangsbron. (bijv. RF, Video,
Component, PC of HDMI)
5 Druk op de toets EXIT om het menu te verlaten.
TV
Beeld
Modus
: Dynamisch
Contrast 100
Helderheid 45
Scherpte 75
Kleur
55
Tint
G 50
R 50
Kleur tint
: Koel1
Detailinstellingen
Meer
Verpl.
TV
Enter
Terug
Beeld
Dynamisch
Modus
: Dynamisch
Standaard 100
Contrast
Film
Helderheid
45
Scherpte 75
Kleur
55
Tint
G 50
R 50
Kleur tint
: Koel1
Detailinstellingen
Meer
Verpl.
Enter
Terug
Beeldinstellingen aanpassen
Uw tv heeft verschillende instelmogelijkheden waarmee u de
beeldkwaliteit kunt beheren.
1 Druk op de toets MENU om het menu weer te geven.
2 Druk op de toets ENTER/OK om Beeld te selecteren.
3 Druk op de toets ENTER/OK om Modus te selecteren.
4 Selecteer de gewenste modus door op de toets of te
drukken en druk vervolgens op de toets ENTER/OK.
Beschikbare modi: Dynamisch, Standaard, Film
5 Selecteer de gewenste optie door op de toets of te
drukken en druk vervolgens op de toets ENTER/OK.
6 Druk op de toets ENTER/OK wanneer u tevreden bent met de
instelling.
7 Druk op de toets EXIT om het menu te verlaten.
TV
Beeld
Modus
: Dynamisch
Contrast 100
Helderheid 45
Scherpte 75
Kleur
55
Tint
G 50
R 50
Kleur tint
: Koel1
Detailinstellingen
Meer
TV
Verpl.
Enter
Terug
Beeld
Modus
: Dynamisch
Contrast 100
Helderheid 45
Scherpte 75
Kleur
55
Tint
G 50
Koel2 R 50
Kleur tint
: Koel1
Koel1
Detailinstellingen Normaal
Warm1
Meer
Warm2
Nederlands - 18
BN68-01743A-00Dut.indd
18
2008/08/13
11:48:04
TV
Beeld
Modus
: Film
Contrast 80
Helderheid 65
Scherpte 35
Kleur
35
Tint
G 50
R 50
Kleur tint
: Warm2
Detailinstellingen
Meer
TV
Enter
Terug
Detailinstellingen
Zwartaanpassing : Uit
Dynamisch contrast : Laag
Gamma
: 0
Witbalans
Pers. kleurinst.
Randverbetering : Uit
Kleurruimte
: Breed
Verpl.
Verpl.
Enter
Terug
ingesteld.
Zwartaanpassing: Uit/Laag/Middel/Hoog
U kunt direct het zwartniveau op het scherm selecteren om de schermdiepte aan te passen.
Dynamisch contrast: Uit/Laag/Middel/Hoog
U kunt het schermcontrast aanpassen zodat u een optimaal contrast verkrijgt.
Gamma: -3 ~ +3
U kunt de gemiddelde helderheid van beelden aanpassen.
Druk op de toets of tot u de beste instelling bereikt.
Witbalans: R-basis/G-basis/B-basis/R-niveau/G-niveau/B-niveau/Reset
U kunt de kleurtemperatuur aanpassen voor natuurlijkere beeldkleuren.
R-basis/G-basis/B-basis/R-niveau/G-niveau/B-niveau: als u de waarde van aanpassing wijzigt,
wordt het aangepaste scherm vernieuwd.
Selecteer de gewenste optie door op de toets of te drukken en druk vervolgens op de toets
ENTER/OK. Druk op de toets of tot u de beste instelling bereikt.
Herstellen: de fabrieksinstellingen van de aangepaste witbalans worden hersteld.
Pers. kleurinst.: Roze/Groen/Blauw/Wit/Reset
U kunt deze instelling aanpassen aan uw persoonlijke voorkeuren.
Roze/Groen/Blauw/Wit: als u de waarde van aanpassing wijzigt, wordt het aangepaste scherm
vernieuwd.
Selecteer de gewenste optie door op de toets of te drukken en druk vervolgens op de toets
ENTER/OK. Druk op de toets of tot u de beste instelling bereikt.
Herstellen: de fabrieksinstellingen voor de aangepaste kleuren worden hersteld.
Randverbetering: Uit/Aan
U kunt randen van objecten benadrukken.
Kleurruimte: Auto/Breed
U kunt de ruimte waarin kleuren worden gereproduceerd voor het invoersignaal instellen op Auto of
Breed.
Nederlands - 19
BN68-01743A-00Dut.indd
19
2008/08/13
11:48:05
Beeldformaat selecteren
U kunt het beeldformaat selecteren dat het beste overeenkomt
TV
Beeld
met uw wensen.
Meer
Formaat
: Auto-breed
1 Druk op de toets MENU om het menu weer te geven.
Schermmodus
: 16 : 9
Actieve
kleuren
: Aan
de toets ENTER/OK.
Film plus
: Aan
Reset
: OK
De schermmodus selecteren
Wanneer u het beeldformaat op een tv met een breedte van
TV
Beeld
16:9 instelt op Auto-breed, kunt u het gewenste beeldformaat
Meer
Formaat
: Auto-breed
instellen op 4:3 WSS (Wide Screen Service) of niets. Omdat er
Schermmodus
: 16 : 9
Film plus
: Aan
BN68-01743A-00Dut.indd
20
2008/08/13
11:48:06
TV
Beeld
Druk op de toets MENU om het menu weer te geven.
Meer
Druk op de toets ENTER/OK om Beeld te selecteren.
Formaat
: Auto-breed
Selecteer de gewenste optie door op de toets of te
Schermmodus
: 16 : 9
Dig. ruisfilter
: Auto
DNIe
: Uit
Beschikbare opties: Digitaal ruisfilter, Actieve kleuren, DNIe,
Film plus
: Aan
Film plus
Reset
: OK
Nederlands - 21
BN68-01743A-00Dut.indd
21
2008/08/13
11:48:07
Geluidskenmerken
1
2
de toets ENTER/OK.
SRS TS XT
: Uit
Auto Volume
: Uit
SRS TS XT
: Uit
Geluidskeuze
: Hoofdtuner
Nederlands - 22
BN68-01743A-00Dut.indd
22
2008/08/13
11:48:08
NICAM Stereo
NICAM DUAL-I/II
A2
Stereo
Aanduiding op scherm
Mono (Normaal gebruik)
NICAM
Mono
(Normaal)
NICAM
stereo
Mono
(Normaal)
NICAM
dual-1
NICAM
dual-2
Normale uitzending
(Standaard audio)
Tweetalig of DUAL-I/II
Dual I
Stereo
Stereo
Mono
(Normaal)
Als de ontvangst slechter wordt, kunt u de geluidskwaliteit verbeteren door Mono te selecteren.
Wanneer het stereosignaal te zwak is en er automatische zenderverdringing optreedt, kunt u
beter naar Mono schakelen.
Bij ontvangst van geluid in mono in de audio/videostand kunt u beter de ingang AUDIO-L
op het aansluitpaneel gebruiken (voorzijde of zijkant). Als het monogeluid alleen uit de linker
luidspreker komt, druk dan op de knop DUAL I-II.
Nederlands - 23
BN68-01743A-00Dut.indd
23
2008/08/13
11:48:08
Tijdskenmerken
1
2
TV
Instellingen
Druk op de toets MENU om het menu weer te geven.
Spelmodus
: Uit
Melodie
: Uit
toets ENTER/OK.
PC
Lichteffect
: Uit
drukken en druk vervolgens op de toets ENTER/OK.
Meer
Beschikbare opties: Klok instellen, Slaaptimer, Timer 1,
Verpl.
Enter
Terug
Timer 2, Timer 3
TV
Time
5 Druk op de toets ENTER/OK wanneer u tevreden bent met de
instelling.
Klok instellen
: 00 : 00
Slaaptimer
: Uit
Timer 2
: Uit
Klok instellen
Timer 3
: Uit
uitschakelen
Automatisch
Als u de timer instelt op Aan, schakelt de televisie uiteindelijk uit wanneer binnen 3 uur na
het automatisch inschakelen van het toestel geen knop wordt ingedrukt. Deze functie is alleen
beschikbaar in de timermodus Aan. Met deze functie wordt oververhitting tegengegaan, wat kan
gebeuren als het toestel te lang ingeschakeld blijft staan.
Nederlands - 24
BN68-01743A-00Dut.indd
24
2008/08/13
11:48:10
Spelmodus
: Uit
Melodie
: Uit
Beschikbare opties: Taalkeuze, Blauw scherm, Melodie,
Thuisbioscoop-pc : Uit
Lichteffect
: Uit
Lichteffect, Spaarstand, HDMI-zwartniveau
Meer
4 Druk op de toets ENTER/OK wanneer u tevreden bent met de
Verpl.
Enter
Terug
instelling.
5 Druk op de toets EXIT om het menu te verlaten.
TV
Instellingen
Meer
Taalkeuze
Aanpassen van muurbevestiging
Afhankelijk van het model van het toestel. Wanneer u de tv voor
Spaarstand
: Uit
HDMI-zwartniveau : Laag
Nederlands - 25
BN68-01743A-00Dut.indd
25
2008/08/13
11:48:10
De spelmodus gebruiken
Bij het aansluiten van een spelcomputer, zoals een
TV
Instellingen
PlayStationTM of XboxTM, kunt u genieten van een realistischere
Plug & Play
Taalkeuze
: Nederlands
spelervaring door het spelmenu te selecteren.
Tijd
Spelmodus
: Uit
PC
op de toets ENTER/OK.
Thuisbioscoop-pc : Uit
Lichteffect
: Uit
3 Druk op de toets of om Spelmodus te selecteren en druk
Meer
op de toets ENTER/OK.
Verpl.
Enter
Terug
4 Selecteer Uit of Aan door op de toets of te drukken en
druk vervolgens op de toets ENTER/OK.
5 Druk op de toets EXIT om het menu te verlaten.
Annuleer de spelmodus in het beeldmenu om de spelcomputer te verwijderen en een ander
extern apparaat aan te sluiten.
Als u het tv-menu weergeeft in de spelmodus, trilt het scherm licht.
Spelmodus is niet beschikbaar in de tv-modus.
Als Spelmodus is ingesteld op Aan:
Beeldmodus wordt automatisch ingesteld op Standaard en gebruikers kunnen de modus niet wijzigen.
Geluidsmodus in het menu Geluid is gedeactiveerd. Pas het geluid aan met behulp van de toonregeling.
De functie Geluid resetten is geactiveerd. Als u de functie Reset selecteert na het instellen
van de toonregeling, worden de standaardinstellingen van de toonregeling hersteld.
Nederlands - 26
BN68-01743A-00Dut.indd
26
2008/08/13
11:48:11
Automatische muurbevestiging
TV
Instellingen
Meer
Aanpassen van muurbevestiging
Spaarstand :
Uit
HDMI-zwartniveau : Low
PIP
Bescherming tegen inbranden
Verpl.
Enter
Terug
Positie 1
Instellen
1
INFO
Midden
Sluiten
De afstandsbediening gebruiken
Toets
(Rood) (Groen)
Bediening
(Geel)
Herstellen
Positie opslaan en
teruggaan naar de
opgeslagen positie
Nederlands - 27
BN68-01743A-00Dut.indd
27
2008/08/13
11:48:13
HDMI-zwartniveau : Laag
: TV
Bron
Programma
Formaat
:
Positie
:
instelling.
6 Druk op de toets EXIT om het menu te verlaten.
PIP: Aan/Uit
U kunt de PIP-functie aan- of uitzetten.
Verpl.
Enter
Terug
U kunt deze opties selecteren door eenvoudig op de toets
PIP op de afstandsbediening te drukken.
Bron: TV/Ext.1/Ext.2/AV
U kunt de bron voor het subbeeld selecteren.
Formaat:
/
/
U kunt het formaat voor het subbeeld selecteren.
Als het hoofdbeeld is ingesteld in de PC en Component
modus, is Formaat niet beschikbaar.
Positie:
/
/
/
U kunt de positie van het subbeeld selecteren.
Programma
U kunt alleen een kanaal voor het subbeeld selecteren als Bron is ingesteld op TV.
O
O
O
O
O
O
O
O
O
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Nederlands - 28
BN68-01743A-00Dut.indd
28
2008/08/13
11:48:14
Punten
horizontaal
Verticale lijn
Tijd (minuten)
PC
TV/Ext/AV/S-Video/
Component/HDMI/DTV
1
2 min
2
2 min
TV
Instellingen
Meer
Aanpassen van muurbevestiging
Spaarstand
: Uit
HDMI-zwartniveau : Laag
PIP
Bescherming tegen inbranden
TV
Verpl.
Enter
Terug
Pixelverschuiv.
Geheel wit
Patroon signaal
Verpl.
TV
Enter
Terug
Pixelverschuiv.
Pixelverschuiv.
Punten hor.
Vert. lijn
Tijd
Verpl.
: Aan
: 2
: 2
: 2 min
Enter
Terug
De waarde voor Pixelverschuiving kan verschillen afhankelijk van het formaat (inches) en de
modus
van de monitor.
Geheel wit: Deze functie helpt ingebrande beelden op uw scherm te verwijderen door de kleur van
de pixels in wit te veranderen. Gebruik deze functie wanneer er beelden of symbolen op uw scherm
achterblijven, vooral na het langere tijd weergeven van een stilstaand beeld op uw scherm.
Patroon signaal: Deze functie helpt ingebrande beelden op het scherm te verwijderen door de
pixels op uw plasmascherm in een bepaald patroon te verschuiven. Gebruik deze functie wanneer
er beelden of symbolen op uw scherm achterblijven, vooral na het langere tijd weergeven van een
stilstaand beeld op uw scherm.
Grijswaarden balken: Wanneer u tv kijkt met de schermverhouding 4:3, wordt voorkomen dat het
scherm beschadigd raakt door de witbalans geheel links en rechts aan te passen.
Verduisteren: Wanneer u de schermratio op 4:3 instelt, worden de linker- en rechterkant
donkerder.
Verhelderen: Wanneer u de schermratio op 4:3 instelt, worden de linker- en rechterkant helderder.
Gebruik de functie Geheel wit of Patroon signaal om ingebrande beelden te verwijderen. Hoewel
beide functies ingebrande beelden op het scherm verwijderen, is Patroon signaal effectiever.
De functie voor het verwijderen van ingebrande beelden moet gedurende lange tijd (ongeveer een
uur) uitgevoerd worden om alle beelden effectief te verwijderen. Voer de functie nog eens uit als de
ingebrande beelden niet minder zijn geworden na het uitvoeren van de functie.
Druk op een willekeurige toets op de afstandsbediening om deze functie te annuleren.
Nederlands - 29
BN68-01743A-00Dut.indd
29
2008/08/13
11:48:15
Nederlands - 30
BN68-01743A-00Dut.indd
30
2008/08/13
11:48:15
Invoermodus (PC)
Zowel de beeldpositie als de grootte varieert afhankelijk van het type monitor en de bijbehorende
resolutie.
In de onderstaande tabel ziet u alle ondersteunde beeldschermmodi:
Videosignaal
Resolutie
(Punten x
lijnen)
640 x 350
720 x 400
640 x 480
IBM PC / AT
Compatibel
800 x 600
1024 x 768
Verticale
frequentie
(Hz)
70.086
70.087
59.940
70.000
72.809
75.000
60.317
70.000
72.188
75.000
60.004
70.069
72.000
75.029
Horizontale
frequentie
(kHz)
31.469
31.469
31.469
35.000
37.861
37.500
37.879
43.750
48.077
46.875
48.363
56.476
57.672
60.023
Verticale
polariteit
Horizontale
polariteit
PS42A417
N
P
N
N.v.t.
N
N
P
N.v.t.
P
P
N
N
N.v.t.
P
P
N
N
N.v.t.
N
N
P
N.v.t.
P
P
N
N
N.v.t.
P
Nederlands - 31
BN68-01743A-00Dut.indd
31
2008/08/13
11:48:15
De pc instellen
over naar de PC-stand door op de toets SOURCE te
Schakel
drukken.
TV
Instellingen
Plug & Play
Taalkeuze
: Nederlands
Tijd
Spelmodus
: Uit
Blauw scherm
: Uit
Melodie
: Uit
PC
Thuisbioscoop-pc : Uit
Lichteffect
: Uit
Meer
1
2
Verpl.
Enter
TV
Terug
PC
Beeld vergrendelen
Positie
Autom. afstellen
Beeld resetten
TV
Verpl.
Enter
Terug
Beeld vergrendelen
Grof
Fijn
Verpl.
TV
50
31
Enter
Terug
Positie
Verpl.
Enter
Terug
Beeld reresetten.
Terug
Nederlands - 32
BN68-01743A-00Dut.indd
32
2008/08/13
11:48:16
De thuisbioscoop-pc instellen
U kunt beelden met een hogere kwaliteit weergeven door de
TV
Instellingen
scherminstellingen in de pc-modus te configureren.
Plug & Play
Taalkeuze
: Nederlands
Als u de functie Thuisbioscoop-pc instelt op Aan, kunt u de
Tijd
Blauw scherm
: Uit
Thuisbioscoop-pc : Uit
Nederlands - 33
BN68-01743A-00Dut.indd
33
2008/08/13
11:48:17
Gids
Gids voor Nu en Morgen
Volledige gids
Programmalijst
Standaardgids
Verpl.
: Volledige gids
Enter
Sluiten
Kanaal
Automatisch opslaan
Handm. opslaan
Favorieten bewerken
Kanalenlijst
Verpl.
Enter
Sluiten
Instellingen
Alles
Favorieten
Standaard
Kinderslot
Ondertiteling : Aan
Ondertit.modus : Normaal
Geluidsformaat : PCM
Verpl.
Enter
Sluiten
Hoog
Middel
Laag
Ondoorzichtig
Leeftijdsbeperking
PIN wijzigen
Uit
Aan
Normaal
Slechthorenden
PCM
Dolby Digital
Deactiveren
Activeren
Productinformatie
Signaalinformatie
Software upgrade
Algemene interface
Reset
Wordt vervolgd...
Nederlands - 34
BN68-01743A-00Dut.indd
34
2008/08/13
11:48:18
Taalkeuze
Gesproken taal
Ondertitelingstaal
Teleteksttaal
Voorkeur
Taalkeuze
Gesproken taal
Ondertitelingstaal
Teleteksttaal
Voorkeur
Verpl.
Enter
Sluiten
De subitems van het CI-menu variren, afhankelijk van het CAM-model. (Zie pagina 45.)
Programma-informatie weergeven
Wanneer u naar een kanaal kijkt, kunt u aanvullende informatie
over het huidige programma weergeven.
Druk op de toets INFO terwijl u naar een programma kijkt.
De programma-informatie wordt weergegeven.
De informatie wordt weergegeven:
Leeftijdsbeperking
Videotype: SD, HD, Radio
Type geluid: Mono, Stereo, Dual, Dolby Digital
Bestaan van teletekst of DVB-ondertiteling
Gesproken taal
Druk op de toets INFO om de balkinformatie te sluiten.
Alle kanalen
14:20 - 14:33
Contains video with AFD O; coded frame
is 16:9
Sluiten
Nederlands - 35
BN68-01743A-00Dut.indd
35
2008/08/13
11:48:20
Kanaal
Dit menu bevat vier submenus:
Automatisch opslaan, Handmatig opslaan, Favorieten
bewerken en Kanalenlijst.
Druk op de toets of om Kanaal te selecteren en druk
op de toets ENTER/OK. Het menu Kanaal verschijnt.
Kanaal
Automatisch opslaan
Handm. opslaan
Favorieten bewerken
Kanalenlijst
Verpl.
Enter
Sluiten
Kanaal
Automatisch opslaan
Handm. opslaan
Favorieten bewerken
Kanalenlijst
Verpl.
Enter
Terug
Automatisch opslaan
0%
Gevonden diensten: 0
Kanaal: -
Start
Terug
Kanaal
Handm. opslaan
kanaal te selecteren.
Kanalenlijst
Wordt vervolgd...
Nederlands - 36
BN68-01743A-00Dut.indd
36
2008/08/13
11:48:22
Kanaal
1.3 Favorieten bewerken
U kunt uw voorkeurkanalen bewerken met de gekleurde
Automatisch opslaan
toetsen.
Handm. opslaan
toets ENTER/OK.
Kanalenlijst
2
Five
Druk nogmaals op de toets ENTER/OK om de
3
BBC THREE
selectie ongedaan te maken.
4
abc1
5
QVC
Selecteer AlIes: hiermee selecteert u alle kanalen
Toevoegen
3
abc1
Wordt vervolgd...
Nederlands - 37
BN68-01743A-00Dut.indd
37
2008/08/13
11:48:24
Kanalenlijst
1.4 Kanalenlijst
Alle Kanalen-Alles
U kunt de lijst met kanalen of uw favoriete kanalen weergeven. BBC TWO
Card M...
806 arte
40. BBC NEWS24
Druk op de toets of om Kanalenlijst te selecteren en 1.2. Test
51. BBCi
BBC TWO
800 ARD-MHP-DATA
3. Vida003b
druk op de toets ENTER/OK.
801 ARD-OnLine-K..
4. Vida004b
802 BBC ONE
5. Vida005b
U kunt hiervoor ook de knop CH LIST gebruiken.
803 MDR FERNSE..
6. Vida006b
804 NDR FERNSEH..
7. BBC THREE
Druk op de gele toets om te schakelen tussen uw
30. CBBC Kanaal
805 Vida002b
favorieten en alle kanalen.
Vorige pagina
Volgende pagina
Favorieten
TV
Uw favorieten worden alleen weergegeven als u deze
Verpl.
Bekijken
Sluiten
eerder hebt ingesteld in het menu Favorieten bewerken
(zie pagina 37).
Druk op de rode of groene toets om de vorige of volgende
pagina van de kanalenlijst weer te geven.
Druk op de toets of om een kanaal te selecteren en
druk vervolgens op de toets ENTER/OK.
Het kanaalnummer, de kanaalnaam en een pictogram
worden linksboven weergegeven terwijl u het kanaal wijzigt. Het kanaalnummer en de
kanaalnaam worden weergegeven als het kanaal een van alle kanalen is. Als het kanaal een
van de voorkeurkanalen is, wordt een pictogram weergegeven.
Druk op de blauwe toets of de toets CH LIST om de kanaallijst te sluiten.
Bekijken
Volledige gids
Volgend
Favorieten
Sluiten
Wordt vervolgd...
Nederlands - 38
BN68-01743A-00Dut.indd
38
2008/08/13
11:48:25
2.3 Standaardgids
U kunt de stijl voor de standaardgids vooraf instellen.
Druk op de toets of om de gewenste optie
(Nu/Volgend of Volledige gids) te selecteren en druk
vervolgens op de toets ENTER/OK. De geselecteerde
optie voor de standaardgids wordt weergegeven in het
EPG-menu en de kanaallijst wordt weergegeven.
Gids
Gids voor Nu en Morgen
Volledige gids
Programmalijst
Standaardgids
Verpl.
: Volledige gids
Enter
Terug
Gids
Gids voor Nu en Morgen
Volledige gids
Programmalijst
Standaardgids
Verpl.
Nu/Volgend
: Volledige
gids
Volledige gids
Enter
Terug
Wordt vervolgd...
Nederlands - 39
BN68-01743A-00Dut.indd
39
2008/08/13
11:48:28
Gids
Gids voor Nu en Morgen
Volledige gids
Programmalijst
Standaardgids
Enter
Terug
Nu
Verpl.
: Volledige gids
Bekijken
Volgend
Volledige gids
Favorieten
Sluiten
Bekijken
Volledige gids
Taalkeuze
Dit menu bevat vier submenus:
Gesproken taal, Ondertitelingstaal, Teleteksttaal
enVoorkeur.
Nee
Favorieten
Sluiten
Taalkeuze
Gesproken taal
Ondertitelingstaal
Teleteksttaal
Voorkeur
Verpl.
Enter
Terug
Wordt vervolgd...
Nederlands - 40
BN68-01743A-00Dut.indd
40
2008/08/13
11:48:29
Taalkeuze
3.2 Voorkeur
Dit menu bevat zes submenus:
Gesproken taal
Eerste taal voor audio, Tweede taal voor audio, Eerste taal
Ondertitelingstaal
ondertitel, Tweede taal ondertitel, Eerste taal teletekst en
Teleteksttaal
Tweede taal teletekst.
Voorkeur
Wordt vervolgd...
Nederlands - 41
BN68-01743A-00Dut.indd
41
2008/08/13
11:48:31
Instellingen
Dit menu bevat negen submenus:
Transparantie menu, Kinderslot, Ondertiteling,
Ondertitelingsmodus, Digitale tekst, Tijdzone,
Geluidsformaat en Systeem.
4.1 Transparantie menu
U kunt de transparantie van het schermmenu instellen.
Druk op de toets of om de gewenste optie (Hoog,
Middel, Laag of Ondoorzichtig) te selecteren en druk
vervolgens op de toets ENTER/OK.
Instellingen
Transparantie menu : Middel
Kinderslot
Ondertiteling : Aan
Ondertit.modus : Normaal
Geluidsformaat : PCM
Verpl.
Enter
Terug
Instellingen
Transparantie menu : Middel
Hoog
Kinderslot
Middel
Laag
Ondertiteling : Aan
Ondoorzichtig
Ondertit.modus : Normaal
Geluidsformaat : PCM
Verpl.
Enter
Terug
4.2 Kinderslot
Instellingen
Door een PIN-code (persoonlijk identificatienummer) van vier
cijfers in te stellen kunt u met deze functie voorkomen dat
Transparantie menu : Middel
programmas bekijken.
Ondertiteling : Aan
Wordt vervolgd...
Nederlands - 42
BN68-01743A-00Dut.indd
42
2008/08/13
11:48:33
Instellingen
4.3 Ondertiteling / Ondertitelingsmodus / Geluidsformaat /
Digitale tekst
Transparantie menu : Middel
voorkeuren.
Ondertiteling : Aan
slechthorenden)
Verpl.
Enter
Terug
Als u naar een programma kijkt waarin de functie
Instellingen
Slechthorenden niet wordt ondersteund, wordt
Transparantie menu : Middel
Geluidsformaat
Ondertit.modus : Normaal
Tijdzone
Systeem
Verpl.
Enter
Terug
Wordt vervolgd...
Nederlands - 43
BN68-01743A-00Dut.indd
43
2008/08/13
11:48:35
4.5 Systeem
Dit menu bevat vijf submenus:
Productinformatie, Signaalinformatie, Software upgrade,
Algemene interface en Reset.
Productinformatie
U kunt informatie over uw product weergeven. Neem contact
op met een erkende Samsung-dealer voor onderhoud of
reparaties.
Druk op de toets ENTER/OK met Productinformatie
geselecteerd. Het menu Productinformatie wordt
weergegeven.
Software-versie / Firmware-versie
Signaalinformatie
U kunt informatie over de signaalstatus weergeven.
Druk op de toets ENTER/OK met Signaalinformatie
geselecteerd. Er wordt technische informatie over de
signaalstatus weergegeven.
Service / Dienst-ID / Multiplex / Netwerk /
Bitfoutniveau / Signaalsterkte
Software upgrade (optie)
Regelmatig worden software-upgrades verzonden met het
normale televisiesignaal om uw product synchroon te laten
lopen met de nieuwe mogelijkheden van digitale televisie.
Deze signalen worden automatisch gedetecteerd, waarna de
balk voor software-upgrades wordt weergegeven. U krijgt de
optie om de upgrade te installeren.
Softwaregegevens
Druk op de toets ENTER/OK om de huidige
softwareversie weer te geven. Druk nogmaals op de
toets ENTER/OK om informatie over de softwareversie
weer te geven.
Handmatige upgrade
Druk op de toets ENTER/OK om te zoeken naar
nieuwe software via de kanalen die momenteel worden
uitgezonden.
Bijwerken standby-modus: Aan/Uit
Druk op de toets ENTER/OK. Selecteer Aan door op de
toets of te drukken om de software-upgrade voort
te zetten terwijl de stroom is ingeschakeld.
45 minuten nadat de tv op stand-by is gezet, wordt
automatisch een handmatige upgrade uitgevoerd.
Omdat de tv intern wordt ingeschakeld, kan dit ertoe
leiden dat op de PDP-tv vage beelden verschijnen. Dit
kan meer dan een uur duren totdat de software-upgrade
is voltooid.
Instellingen
Digitale tekst
Tijdzone
Systeem
Verpl.
Enter
Terug
Systeem
Productinformatie
Signaalinformatie
Software upgrade
Algemene interface
Reset
Verpl.
Enter
Terug
Productinformatie
Software-versie: T_BDXPDEU00_0710
Firmware-versie: T_STDEU7_102c
Terug
Signaalinformatie
Service: ?
Dienst-ID: 0000
Multiplex: ? (TSID 0000,ONID 0000)
Netwerk: ? (ID 0000)
Bitfoutniveau:
10
Signaalsterkte:
0
Terug
Software upgrade
Softwaregegevens
Handmatige upgrade
Verpl.
Enter
Terug
Wordt vervolgd...
Nederlands - 44
BN68-01743A-00Dut.indd
44
2008/08/13
11:48:37
Toepassingsinfo
Algemene interface
De CI-kaart aanbrengen
Type: CA
a. De CI CAM-module kunt u verkrijgen bij uw lokale
Fabrikant: Canal Plus
leverancier of telefonisch bestellen.
Info: Top Up TV
b. Duw de CI-kaart in de CAM in de richting van de pijl
op zijn plaats.
c. Plaats de CAM met de CI-kaart in de sleuf voor de
algemene interface.
Terug
Duw de CAM in de richting van de pijl volledig in
CI-menu
de sleuf.
d. Controleer of u een beeld op een kanaal met een
vervormd signaal kunt bekijken.
U kunt de CAM altijd installeren, ongeacht of de
tv is in- of uitgeschakeld.
Toepassingsinfo
Met deze optie geeft u informatie over een CAM in de
CI-sleuf weer.
Verpl.
Enter
Sluiten
Druk op de toets ENTER/OK om de informatie over
uw toepassing weer te geven.
CI-menu
Hiermee kunt u het CAM-menu selecteren.
Druk op de toets ENTER/OK. De opties van het geselecteerde menu worden weergegeven.
Druk op de toets of om de gewenste optie te selecteren en druk vervolgens op de
knop ENTER/OK.
Selecteer het CI-menu op basis van het menu Pc-kaart.
Reset
Reset
U kunt de opgeslagen waarden weer wijzigen in de
fabrieksinstellingen.
LET OP: Alle kanaalinstellingen
en persoonlijke voorkeuren gaan
Met Reset verwijdert u alle kanaalinformatie en
verloren en worden vervangen door de
gebruikersvoorkeuren en worden alle fabrieksinstellingen
fabrieksinstellingen. Aanbevolen wordt
hersteld.
een reset alleen uit te voeren bij ernstige
problemen.
Druk op de toets ENTER/OK met Reset geselecteerd.
The PIN invoeren wordt weergegeven.
Voer de vier cijfers van uw huidige PIN-code in met de
Terug
cijfertoetsen (0~9). Het waarschuwingsbericht wordt
weergegeven. Alle waarden worden gereset als u
achtereenvolgens op de gekleurde toetsen drukt (rood,
groen, geel en blauw).
De standaard PIN-code voor een nieuwe tv is
0-0-0-0.
Wanneer de PIN in het kinderslot is gewijzigd, wordt
de PIN voor resets automatisch gewijzigd.
Wanneer de reset voltooid is, wordt DTV Plug & Play (DTV Automatisch opslaan, Tijdzoneafhankelijk van het land, Tijdinstelling) gebruikt en wordt de modus Digitale tv verlaten zonder
dat naar de modus Analoge tv wordt overgeschakeld. (Zie pagina 11)
Nederlands - 45
BN68-01743A-00Dut.indd
45
2008/08/13
11:48:39
Wat is Anynet+?
Anynet+ is een AV-netwerksysteem waarmee u dankzij een gebruiksvriendelijke AV-interface alle
aangesloten apparaten kunt bedienen via het Anynet+-menu wanneer Samsung Electronics AVapparaten zijn aangesloten.
Anynet+-apparaten aansluiten
Het Anynet+-systeem ondersteunt alleen AV-apparaten die ondersteuning bieden voor Anynet+.
Controleer of het AV-apparaat dat u wilt aansluiten op de tv, een Anynet+-markering bevat.
Direct aansluiten op de tv
TV
HDMI-kabel
HDMI-kabel
HDMI-kabel
TV
Anynet+-apparaat 1
HDMI-kabel
Thuisbioscoop
HDMI-kabel
Anynet+-apparaat 2
HDMI-kabel
Anynet+-apparaat 3
1 Verbind de HDMI-kabel
met de aansluiting [HDMI
1], [HDMI 2] of [HDMI
3] op de tv en met de
aansluiting HDMI OUT van
het betreffende Anynet+apparaat.
2 Verbind de HDMI-kabel
op de aansluiting HDMI IN
van de thuisbioscoop en
de uitgang HDMI OUT van
het betreffende Anynet+apparaat.
HDMI-kabel
Optische kabel
de optische kabel alleen aan tussen [Digital Audio Out (Optical)] op de tv en en de digitale
Sluit
geluidsinvoer op de receiver.
Sluit slechts n ontvanger aan.
kunt 5.1 channel-geluid beluisteren via de luidsprekers van de thuisbioscoop. Anders kunt u in
Uandere
gevallen alleen stereogeluid via twee kanalen beluisteren. Verbind de aansluiting Digital Audio
IN (optisch) van de thuisbioscoop op de juiste manier met de tv als u tv-geluid via de thuisbioscoop
wilt beluisteren. U kunt echter geen geluid van de BD-recorder weergeven dat naar de thuisbioscoop
via de tv wordt verzonden als 5.1 channel-geluid omdat de tv alleen stereogeluid via twee kanalen
uitvoert. Raadpleeg de handleiding bij de thuisbioscoop.
U kunt een Anynet+-apparaat aansluiten met een HDMI-kabel. Sommige HDMI-kabels ondersteunen
mogelijk geen Anynet+-functies.
Anynet+ werkt wanneer het AV-apparaat dat Anynet+ ondersteunt, op stand-by staat of is ingeschakeld.
Anynet+ ondersteunt in totaal acht AV-apparaten.
Nederlands - 46
BN68-01743A-00Dut.indd
46
2008/08/13
11:48:40
Anynet+ instellen
De volgende instellingen zijn voor het gebruik van Anynet+-functies.
De functie Anynet+ gebruiken
1
2
3
P1
Tv weergeven
TV
Apparaat selecteren
Opnemen
Apparaatmenu
Apparaatbediening
Receiver
: Uit
Instellingen
Verpl.
Enter
Sluiten
Instellingen
Anynet+ (HDMI-CEC)
: UitUit
Automatisch uitsch.
: UitAan
Enter
Terug
Opnemen
op de toets ENTER/OK.
DVD2
Apparaatmenu
BN68-01743A-00Dut.indd
47
2008/08/13
11:48:40
Menu Anynet+
Het menu Anynet+ verandert overeenkomstig het type en de status van de Anynet+-apparaten die
op de tv zijn aangesloten.
Menu Anynet+
Beschrijving
Tv weergeven
Apparaat selecteren
Opnemen
Starten van opname. (Dit menu werkt alleen bij een apparaat dat opnemen ondersteunt.)
Apparaatmenu
Apparaatbediening
Receiver
Instellingen
Bedieningsstatus
Beschikbare toetsen
Numerieke toetsen
////ENTER/OK
Gekleurde toetsen
EXIT
(terugspoelen)
(vooruitspoelen)
(stoppen)
(afspelen/pauze)
Apparaat met
ingebouwde tuner
CH /
Audioapparaat
VOL +/MUTE
Anynet+-apparaat
Nederlands - 48
BN68-01743A-00Dut.indd
48
2008/08/13
11:48:40
Opnemen
toets ENTER/OK.
Apparaatbediening
U kunt nu het geluid via de ontvanger beluisteren.
3 Druk op de toets EXIT om het menu te verlaten.
Device Operation
Receiver : Aan
beluisteren via de ontvanger met twee kanalen.
Instellingen
Controleer het volgende voordat u om service verzoekt
Symptoom
Anynet+ werkt niet.
Oplossing
U kunt de functie Afspelen niet gebruiken wanneer Plug & Play is geactiveerd.
Het televisieprogramma
kan niet worden
opgenomen.
BN68-01743A-00Dut.indd
49
2008/08/13
11:48:41
1 TV/DTV
Teletekstmodus verlaten (afhankelijk van het model)
2
(index)
Druk op deze toets voor weergave van de indexpagina
(inhoudspagina) tijdens het gebruik van teletekst.
3
(teletekst aan/mix)
Druk op deze toets om teletekst te activeren nadat u het
kanaal hebt geselecteerd dat de teletekstdienst aanbiedt. Druk
tweemaal op deze knop om het huidige televisiebeeld over de
teletekstpagina heen weer te geven.
4
(formaat)
Druk op deze toets om de tekst in de bovenste helft van het
scherm op dubbel formaat weer te geven. Druk nogmaals op deze
toets om de tekst in de onderste helft van het scherm op dubbel
formaat weer te geven.
Druk nogmaals op deze knop om terug te keren naar de normale
weergave.
5
(modus)
Druk op deze toets om de teletekstmodus (LIST/FLOF) te
selecteren.
Als u in de LIST-modus op deze knop drukt, schakelt u over naar
de modus Opslaan in lijst.
In deze modus kunt u met behulp van de knop
(opslaan)
teletekstpaginas in een lijst opslaan.
6
(subpagina)
Druk op deze toets om de beschikbare subpaginas weer te geven.
7
(volgende pagina)
Druk op deze toets om de volgende teletekstpagina weer te geven.
8
(vorige pagina)
Druk op deze toets om de vorige teletekstpagina weer te geven.
9
(annuleren)
Hiermee bekijkt u de uitzending wanneer u een pagina zoekt.
0
(tonen)
Druk op deze toets om verborgen tekst weer te geven (zoals antwoorden op quizvragen). Druk
nogmaals op deze toets om terug te keren naar de normale weergave.
! Gekleurde toetsen (rood/groen/geel/blauw)
Als een zendstation gebruikmaakt van het FASTEXT-systeem, worden de verschillende onderwerpen
op een teletekstpagina van een kleurcodering voorzien, die u kunt selecteren met behulp van de
gekleurde toetsen. Druk op de gewenste knop. De pagina wordt weergegeven met aanvullende
kleurcodegegevens, die op dezelfde wijze kunnen worden geselecteerd.
Om de vorige of volgende pagina weer te geven drukt u op de knop met de overeenkomstige kleur.
@
(vastzetten)
Druk op deze toets als u de weergave wilt vasthouden van een
pagina die is gekoppeld aan meerdere subpaginas die elkaar
automatisch opvolgen. Om verder te gaan drukt u nogmaals op
deze knop.
#
(opslaan)
Druk op deze toets om teletekstpaginas op te slaan.
U kunt teletekstpaginas veranderen met de cijferknoppen op de
afstandsbediening.
Wordt vervolgd...
Nederlands - 50
BN68-01743A-00Dut.indd
50
2008/08/13
11:48:43
Inhoud
Geselecteerd paginanummer.
Aanduiding zendstation.
Huidig paginanummer of zoekindicaties.
Datum en tijd.
Tekst.
Statusinformatie.
FASTEXT-informatie.
1
2
Plaats de muurbevestiging met een koppelbereik van 15 kgf/cm of minder. De onderdelen kunnen
beschadigd raken als het koppel buiten het opgegeven bereik valt.
Bij de accessoires vindt u een houder en een ring [] voor het plaatsen van muurbevestigingen voor
uw Samsung TV van andere fabrikanten. (Situatie B)
Nederlands - 51
BN68-01743A-00Dut.indd
51
2008/08/13
11:48:44
Productgroep
LCD-TV
PDP-TV
inch
VESA Spec. (A * B)
Standaardschroeven
23 ~ 26
200 * 100
M4
32 ~ 40
200 * 200
M6
46 ~ 52
600 * 400
57
700 * 400
(Geen VESA)
57 ~ 70
800 * 400
80 ~
1400 * 800
42 ~ 50
600 * 400
55 ~ 70
800 * 400
63
Geen VESA
80 ~
1400 * 800
Aantal
4
M8
4
M8
6
4
leiden dat het valt, resulterend in persoonlijk letsel. Samsung is niet aansprakelijk voor ongelukken
veroorzaakt hierdoor.
Samsung is niet aansprakelijk voor productschade of persoonlijk letsel wanneer een muurbevestiging
wordt gebruikt die niet aan de VESA-norm voldoet of die niet gespecificeerd is, of wanneer de klant
de installatie-instructies van het product niet opvolgt.
Onze modellen van 57 en 63 inch voldoen niet aan de VESA-specificaties. Gebruik daarom voor
deze modellen onze speciaal samengestelde wandbevestigingskit.
Overschrijd de 15 graden niet bij bevestiging van deze tv aan de muur.
Monteer de muurbevestiging niet terwijl de tv is ingeschakeld.
Dit kan resulteren in persoonlijk letsel door elektrische schokken.
Nederlands - 52
BN68-01743A-00Dut.indd
52
2008/08/13
11:48:44
De afstandsbediening instellen
Nadat u de afstandsbediening correct hebt ingesteld, kunt u deze in vijf verschillende modi
gebruiken: Tv, video, kabel, dvd of set-top box. Als u op de overeenkomstige toets op de
afstandsbediening drukt, kunt u tussen deze modi schakelen en een apparaat naar keuze
gebruiken.
De afstandsbediening is mogelijk niet compatibel met alle dvd-spelers, videorecorders, aftakdozen en
settopboxen.
De afstandsbediening instellen voor gebruik met uw videorecorder
1 Schakel de videorecorder uit.
2 Druk op de toets VCR op de afstandsbediening van de tv.
3 Druk op de toets SET op de afstandsbediening van de tv.
4 Voer met de cijfertoetsen op de afstandsbediening de drie cijfers in
van de code voor uw merk videorecorder (zie pagina 55 van deze
handleiding). Voer alle drie de cijfers van de code in, ook al is het
eerste cijfer een 0. (Als er meerdan een code wordt vermeld,
probeert u de eerste code.)
5 Druk op de toets POWER op de afstandsbediening. Als
deafstandsbediening correct is ingesteld, wordt de videorecorder
ingeschakeld.
Wordt vervolgd...
Nederlands - 53
BN68-01743A-00Dut.indd
53
2008/08/13
11:48:45
Wordt vervolgd...
Nederlands - 54
BN68-01743A-00Dut.indd
54
2008/08/13
11:48:46
Codes afstandsbediening
VCR
Merk
SAMSUNG
ADMIRAL
AIWA
AKAI
AUDIO DYNAMICS
BELL&HOWELL
BROKSONIC
CANDLE
CANON
CITIZEN
COLORTYME
CRAIG
CURTIS MATHES
DAEWOO
DB
DIMENSIA
DYNATECH
ELECTROHOME
EMERSON
FISHER
FUNAI
GENERAL ELECTRIC
GO VIDEO
LG(Goldstar)
HARMAN KARDON
HITACHI
INSTANT REPLAY
JC PENNEY
JCL
KENWOOD
KLH
LIOYD
LOGIK
LXI
JVC
MAGNAVOX
MARANTZ
MARTA
KONIA
ORION
MEI
MEMOREX
MGA
MIDLAND
MINOLTA
Code
000 001 002 003 004 005 077 078 079
020
025
004 027 032
007 026
018
022
002 003 006 008 015 055
021 056
002 003 006 008 015 055
007
002 024
002 007 008 017 021 025 056 064 066
003 010 011 012 013 014 015 016
007 026
017
025
034
001 003 006 021 022 025 030 032 034
040 047 050 052 060 063 065 066 067
069 073
018 024 028 029 048 051 061
025
002 005 017 021 056
002
006 007 008 009 010
007
019 025 041 042 074
021
002 007 018 019 021 026 037 041
054 056
007 008 018 021 026 037
007 008 018 026 037
070
025
038
025
081 082 083
021 056 059
007 008 018 021 026 037 062
006
036
073 074 075 076
021
006 021 024 025
034
005
019 041 075
Merk
MITSUBISHI
MONTGOMERY WARD
MTC
MULTITECH
NEC
OPTIMUS
PANASONIC
PENTAX
PENTEX RESEARCH+
PHILCO
PHILIPS
PIONEER
PORTLAND
PROSCAN
QUARTZ
QUASAR
RADIO SHACK/
REALISTIC
RCA
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHIMTOM
SIGNATURE
SONY
SYLVANIA
SYMPHONIC
TANDY
TASHIKA
TATUNG
TEAC
TECHNICS
TEKNIKA
TMK
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
YAMAHA
ZENITH
Code
019 034 041 046
020
002 025
002 005 025 038
007 008 018 026 037 062 064
020
021 056 071 072
019 041 075
008
021 056 059
021 080
019 026 039 053
015 049 055
017
018
021 056
006 018 020 021 024 025 029 034
048 056
002 017 019 021 035 041 043 057
068 076
026
018 024
003 047 052 067
006 018 019 024 028 029 041 048 051
020 034 045 015
027 033 038 058
025
027 033 044
021 025 056 059
025
018 025
006
037
025 037 068
021
006 021 025 031
066
003 019 029 051 052
002 006
002
007 026
026
007 026
002
002 003 006 019 020 021 024 025 034
038 041
007 008 018 026 037
023 027 033
Wordt vervolgd...
Nederlands - 55
BN68-01743A-00Dut.indd
55
2008/08/13
11:48:47
AFTAKDOOS
Merk
SAMSUNG
GI
HAMLIN
HITACHI
JERROLD
MACOM
MAGNAVOX
OAK
PANASONIC
PHILIPS
PIONEER
RCA
REGAL
Code
000 001 002 003 004 005 006 007
041
003 024 031
025 030
038 039
025 030
019 023 028
026
003 022 027 037 044
019 021 023 028
004 018 020 044
014 022 040
003
Merk
REGENCY
SA
SCIENTIFIC ATLAN
SPRUCER
STARGATE 2000
SYLVANIA
TEXSCAN
TOCOM
UNIVERSAL
VIEWSTAR
WARNER AMEX
ZENITH
Code
015 023
042 043
042 043
022
036
016
016
032
033 034
019 021 023 028
046
017 029 035 037 045
Code
000 001 002 008 013
000 004 008 013
000 003 008 013
SET-TOP BOX
Merk
ALPHASTAR
ANAM
CHANNEL MASTER
CROSSDIGITAL
CHAPARRAL
DIRECT TV
DAEWOO
DISH NETWORK SYSTEM
DISHPRO
DRAKE
DX ANTENNA
ECHOSTAR
EXPRESSVU
GOI
GE
GENERAL INSTRUMENT
HTS
HOME CABLE
HITACHI
HUGHES NETWORK
IQ
IQ PRISM
JANEIL
JERROID
JVC
Code
023
043
018 034
019
035
015 016 017 019 022 045 060
061 062 065 066 067 068
074
069 070
069
018 024 032
027
025 069 070 071
069
069
065
046 047 048 063 064
069
056
022
015 017
020
020
059
063
069 070
Merk
LG(Goldstar)
MAGNAVOX
MEMOREX
MOTOROLA
MACOM
MITSUBISHI
NEXT LEVEL
PHILIPS
PRIMESTAR
PANASONIC
PAYSAT
PROSCAN
RCA
RADIOSHACK
REALISTIC
STS
STAR TRAK
SKY
SKY LIFE
SHACK
STAR CHOICE
SONY
TOSHIBA
ULTIMATE TV
UNIDEN
ZENITH
Code
044 073
016 021 036 038 039 040 041 042
016
064
018
015
047 048 064
015 016 017 021 033 036 038 039
040 041 042 067
046 049 050 063
058 059 061 062
016
065 066
051 052 053 065 066
064
057
020 027
026
031
005 006 007
064
064
054 060
015 017 028 029 030 072
060 066
016 021 037 055 056 057
024 031 068
Wordt vervolgd...
Nederlands - 56
BN68-01743A-00Dut.indd
56
2008/08/13
11:48:47
SAMSUNG DVD
Product
DVD
DVDR
BD Record
VCR COMBO
VCR Record
DHR COMBO
Code
000 001 002
003 004
005 006
007 008 009 010 011
012
013
Product
Home Theater VCR COMBO
HDD Record COMBO
TWIN TRAY COMBO
STB DVD COMBO
DVD-ontvanger
AV-ontvanger
Code
014 015 016
017
018
019
020
021
DVD
Merk
ANAM
AUDIOVOX
AUDIOLOGIC
ANABA
APEX DIGITAL
AIWA
BROKSONIC
BLAUPUNKT
B&K
CURTIS MATHES
CYBER HOME
CLARION
CIRRUS
CINEVISION
DAEWOO
DENON
FARENHEIT
FISHER
GPX
GO VIDEO
GE
GREENHILL
HITACHI
HITEKER
HOYO
HARMAN / KARDON
IRT
INTEGRA
JBL
JVC
JATON
KENWOOD
KISS
KONKA
KLH
LG(Goldstar)
LOEWE
LASONIC
MOBILE AUTHORITY
MEMOREX
MALATA
MAGNAVOX
MINTEK
MONYKA
Code
030
075
085
072
070 071 074 086 083 084 088
111 112
114
062
074
122 123
027
065 077 078 079 082
080 125
081
095
066
146
067 068
090
060
061 089 133 135
069 074
074
064 113
071
073
091 110
089
092
091
022 033 115 116
073
051 108 109
073
059 100 106 107
074 075
025 031
057
058
054
055
056
076 093
074 094
073
Merk
NORCENT
NEXT BASE
NEC
NANTAUS
NESA
OPTOMEDIA ELECTRONICS
OPTIVIEW
ONKYO
PHILCO
PRINCETON
PROSCAN
PANASONIC
PHILIPS
ROTEL
RIO
RCA
RAITE
ROWA
SAMPO
SONY
SHERWOOD
SVA
SYLVANIA
SHARP
SANSUI
SANYO
SHINSONIC
SANYO
THOMSON
TOSHIBA
TECHNICS
TVIEW
TOKAI
TEAC
TECHWOOD
TREDEX
URBAN CONCEPTS
VENTURER
VOCOPRO
YAMAHA
YAMAKAWA
XWAVE
ZENITH
Code
048 049 050
052
053
144
074
105
072
076 092 119
044 045
046 047
023
024 034 124 134 136 137 138
036 076
117 118
120
023 035 074 075 131 132
073
038
104
026 029 126 127 128 129
130 141
039 041
042
043 093
140
062
062
094
090
145
028 062 076
139
072
073
096
097
098 099 101
076
075
102
032 063
040 073
103
076 121
Nederlands - 57
BN68-01743A-00Dut.indd
57
2008/08/13
11:48:48
Problemen oplossen
Voer de onderstaande simpele controles uit voordat u de after-salesdienst van Samsung
inschakelt.
Als u het probleem niet kunt oplossen aan de hand van de onderstaande instructies, noteert u het
model en het serienummer van de televisie en neemt u contact op met uw lokale leverancier.
Geen geluid of beeld
Controleer of het netsnoer op een wandstopcontact is aangesloten.
Controleer of u op de knop (Power) (On/Off) op het voorpaneel hebt gedrukt of druk op de toets
POWER op de afstandsbediening.
Controleer de instellingen voor het contrast en de helderheid van het beeld.
Controleer het geluidsvolume.
Controleer of Interne Mute in de stand Aan staat.
Normaal beeld maar geen geluid
Controleer het geluidsvolume.
Controleer of de toets MUTE op de afstandsbediening is ingedrukt.
Geen beeld of zwart-witbeeld
Pas de kleurinstellingen aan.
Controleer of het geselecteerde uitzendsysteem correct is.
Geluid en beeld met storing
Probeer erachter te komen welk elektrisch apparaat de televisie stoort en plaats het apparaat uit de
buurt van de televisie.
Sluit de televisie op een ander stopcontact aan.
Vaag beeld of sneeuw, vervormd geluid
Controleer de richting, plaats en aansluitingen van de antenne.
Deze storing treedt vaak op bij het gebruik van een binnenantenne.
Afstandsbediening werkt niet goed
Vervang de batterijen van de afstandsbediening.
Reinig de bovenste rand van de afstandsbediening (transmissievenster).
Controleer of de + and polen van de batterij correct geplaatst zijn.
Controleer of de batterijen leeg zijn.
Het scherm is zwart en het aan/uit-lampje knippert gestaag
Controleer of uw computer aanstaat en of de signaalkabel in orde is.
Het energiebeheersysteem van de TV is actief.
Beweeg de muis van de computer of druk op een willekeurige toets op het toetsenbord.
Controleer of het apparaat (STB, DVD, etc) aanstaat en of de signaalkabel in orde is.
Het energiebeheersysteem van de TV is actief.
Druk op de toets Source op het paneel of op de afstandsbediening.
Zet de TV uit en weer aan.
De beschadigde afbeelding wordt weergegeven in de hoek van het scherm.
Als Alleen scannen is geselecteerd in enkele externe apparaten, wordt de beschadigde afbeelding
mogelijk weergegeven in de hoek van het scherm. Dit wordt veroorzaakt door de externe apparaten,
niet door de tv.
Nederlands - 58
BN68-01743A-00Dut.indd
58
2008/08/13
11:48:51
Specificaties
De beschrijvingen en kenmerken in dit boekje zijn alleen bedoeld ter informatie en kunnen zonder
kennisgeving worden gewijzigd.
Modelnaam
PS42A417
Schermformaat (diagonaal)
106,68 cm
Pc-resolutie
Geluidsuitgang
10W X 2
Afmetingen (BxHxD)
Behuizing
Met voet
1055 x 700 x 95 mm
1055 x 759 x 316 mm
Gewicht
Behuizing
Met voet
31 kg
34 kg
Omgevingsvereisten
Gebruikstemperatuur
Gebruiksvochtigheid
Opslagtemperatuur:
Opslagvochtigheid
Nederlands - 59
BN68-01743A-00Dut.indd
59
2008/08/13
11:48:52
BN68-01743A-00Dut.indd
60
2008/08/13
11:48:52
Italiano -
BN68-01171B-05Ita.indd
2008-8-13
11:58:51
Sommario
Informazioni generali
Funzionamento
Controllo dellimmagine
Controllo dellaudio
Funzioni audio................................................ 22
Selezione della modalit audio (a seconda
del modello)................................................... 23
Funzioni orario............................................... 24
Lingua / Pagina blu / Melodia / Effetto luce /
Risp. energia / Livello di nero HDMI.............. 25
Uso della modalit Gioco............................... 26
Regolazione montaggio a parete (kit venduto
separatamente)............................................... 27
Visualizzazione in modalit PIP.................... 28
Sistema di protezione plasmi......................... 29
Schermo del PC
Impostazione del software del PC (basato
su Windows XP)............................................. 30
Modalit di ingresso (PC)............................... 31
Impostazione del PC...................................... 32
Impostazione di PC Home theater................. 33
Informazioni su Anynet+
Italiano
Appendice
Importante
Nota
Simboli
Premere
Italiano -
BN68-01171B-05Ita.indd
2008-8-13
11:58:52
Manuale dellutente
Telecomando/
Batterie AAA
Cavo di alimentazione
Scheda di garanzia/
Guida alla sicurezza
(Non disponibile in tutti i paesi)
Coperchio-Pannello inferiore
/ Viti (2ea)
(vedere pagina 58).
Nucleo in ferrite
per cavo di
alimentazione
Nucleo in ferrite
per S-Video
Panno di pulizia
Nucleo in ferrite
per il cavo delle
cuffie
Acquistabile a parte
Cavo S-Video
Cavo antenna
Cavi Component
Cavi audio
Cavo video
Cavo PC
Cavo scart
Cavo PC Audio
Cavo HDMI
Cavo HDMI/DVI
-20 ~ 20
Italiano -
BN68-01171B-05Ita.indd
2008-8-13
13:34:49
Pannello di controllo
Pannello frontale (o laterale)
ENTER
Nel menu a video, utilizzare questo tasto
cos come si usa il tasto ENTER del
telecomando.
Tasto di accensione
Premere per accendere e spegnere il
televisore.
Indicatore di alimentazione
3 +
C/P.
Premere per cambiare canale. Nel menu
a video, utilizzare i pulsanti
C/P.
cos come si utilizzano i tasti e del
telecomando.
Italiano -
BN68-01171B-05Ita.indd
2008-8-13
11:58:55
2
oppure
Pannello posteriore
1
oppure
Televisione via
cavo Rete
8
oppure
BN68-01171B-05Ita.indd
Continua...
2008-8-13
11:58:58
1 POWER IN
Collegare il cavo di alimentazione fornito in
dotazione.
2 Collegamento di dispositivi audio esterni
Collegare i segnali audio RCA provenienti dal
televisore a una sorgente esterna, come per
esempio un dispositivo audio.
3 EXT 1, EXT 2
Ingressi e uscite di dispositivi esterni quali
videoregistratori, DVD, periferiche di gioco o
lettori di dischi video.
Specifiche di I/O
EXT 1
Ingresso
Uscita
Video Audio (L/R) RGB Video + Audio (L/R)
Solo luscita TV o
DTV disponibile.
EXT 2
Connettore
Uscita da scegliere.
4 COMPONENT IN
Ingressi (AUDIO L/R) e video (Y/PB/PR) per
Component.
5 DIGITAL AUDIO OUT (OPTICAL)
Collegare a un componente audio digitale.
6 SERVICE
Connettore riservato allassistenza.
Per regolare con il telecomando langolo
di visuale del televisore, collegare il jack
seriale tra la staffa
di montaggio a parete a movimento
elettronico e il televisore.
7 PC IN / AUDIO
Collegare ai jack video e audio del PC.
8 Slot COMMON INTERFACE
Inserire la scheda CI (Common Interface,
interfaccia comune) nello slot (vedere pagina 45).
Con alcuni canali, se non si inserisce la
Scheda IC appare il messaggio Segnale
criptato.
Le informazioni di pairing che contengono
un numero telefonico, lID della scheda IC,
lID host e altri dati verranno visualizzate
entro 2~3 minuti. Se viene visualizzato un
messaggio di errore, contattare il service
provider.
Quando la configurazione delleinformazioni
relative al canale stata completata, viene
visualizzato il messaggio Aggiornamento
completato, a indicare che lelenco dei
canali stato aggiornato.
Inserire la scheda IC nella direzione
indicata sulla scheda stessa.
9 HDMI IN 1, HDMI IN 2
Collegare al jack HDMI di un dispositivo
predisposto per tale uscita. Questi ingressi
possono inoltre essere utilizzati come
collegamento DVI con ingressi audio
analogici separati. necessario disporre
di un cavo HDMI/DVI opzionale per
effettuare questo collegamento. Quando
si usa ladattatore HDMI/DVI opzionale, gli
ingressi audio analogici DVI sul televisore
permettono di ricevere il canale audio
sinistro e destro dal dispositivo DVI. (Non
compatibile con PC.)
Quando si collega questo prodotto
attraverso HDMI o DVI a un Set Top Box,
un lettore DVD, una console di gioco ecc.,
verificare che sia stato impostato su una
modalit di uscita video compatibile, come
mostra la tabella sottostante. In caso
contrario, possono verificarsi distorsioni,
interruzioni o assenza di immagine.
Non tentare di collegare il connettore HDMI/
DVI a un PC o a una scheda grafica Laptop.
In caso contrario, verr visualizzata una
schermata vuota.
DVI IN (HDMI 2) AUDIO L/R
Uscite audio DVI per dispositivi esterni.
0 ANT IN
Connettore coassiale 75 per reti aeree/cavo.
Modalit supportate per HDMI e Component
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Component
Italiano -
BN68-01171B-05Ita.indd
2008-8-13
11:58:59
riproduzione/pausa.
Una illuminazione troppo intensa pu avere conseguenze sulle prestazioni del telecomando.
1 Tasto POWER
(accende e spegne il
televisore)
2 Tasti numerici per
selezionare direttamente i
canali
3 Selezione dei canali con
una/due cifre
4 Tasto di controllo dei canali
(vedere pagina 15)
5 Seleziona direttamente il
televisore e la modalit DTV
6
Aumento del volume
Diminuzione del volume
7 Disattivazione temporanea
dellaudio
8 Visualizza il menu a video
principale
9 Ritorna al menu precedente
@ Selezione del formato
dellimmagine
# Visualizzazione della Guida
elettronica dei canali (EPG,
Electronic Program Guide)
$ Selezione della modalit
audio
% Impostazione del
telecomando
^ Seleziona lapparecchio di
destinazione da controllare
con il telecomando Samsung
(TV, DVD, STB, ricevitore via
cavo, videoregistratore)
& Premere per attivare la
retroilluminazione dei tasti
VOL e CH e della sorgente
(TV, DVD, CABLE, STB,
VCR) sul telecomando.
* Selezione della sorgente
disponibile
( Canale precedente
) Visualizzazione menu DTV
a Registrazione di trasmissioni
in diretta
b Funzioni videoregistratore/
DVD: riavvolgimento,
(Arresto, Riproduzione/pausa,
Avanzamento Rapido)
c
Canale successivo
Canale precedente
Continua...
Italiano -
BN68-01171B-05Ita.indd
2008-8-13
11:59:00
Italiano -
BN68-01171B-05Ita.indd
2008-8-13
11:59:00
2
3
4
5
TV
Immagine
Modalit
: Dinamica
Contrasto 100
Luminosit 45
Nitidezza 75
Colore
55
Tinta
V 50
R 50
Toni colore
: Freddo1
Impostazioni dettaglio
Altro
Sposta
Conferma
Esci
Ritorno
Lingua
Sposta
Conferma
Salta
Sposta
Casa
Conferma
Salta
Conferma
Salta
Sposta
Belgio
Francia
Germania
Italia
Conferma
Salta
Continua...
Italiano - 10
BN68-01171B-05Ita.indd
10
2008-8-13
11:59:02
Continua...
Italiano - 11
BN68-01171B-05Ita.indd
11
2008-8-13
11:59:03
Data
Anno
01
15
2007
Ora
Minuto
12
00
Regola
Sposta
Selezione
Salta
Buona visione
OK
TV
Impostazione
Plug & Play
Lingua
: Italiano
Ora
Modalit gioco
: Spento
Pagina blu
: Spento
Melodia
: Spento
PC
PC Home theater : Spento
Effetto luce
: Spento
Altro
Sposta
Conferma
Ritorno
TV
Inserisci
Elenco sorgenti : TV
Modifica Nome
Anynet+
TV
Sposta
Conferma
Ritorno
Elenco sorgenti
TV
Est.1
Est.2
AV
S-Video
Comp.
PC
HDMI1
HDMI2
HDMI3
DTV
:
:
:
:
:
:
:
:
:
:
Sposta
Conferma
Ritorno
Italiano - 12
BN68-01171B-05Ita.indd
12
2008-8-13
11:59:04
Inserisci
TV
Elenco sorgenti : TV
Modifica Nome
Anynet+
TV
Conferma
Ritorno
Modifica Nome
Est.1
Est.2
AV
S-Video
Comp.
PC
HDMI1
HDMI2
HDMI3
Sposta
:
: VCR
: DVD
: D-VHS
:
STB cavo
:
HD STB
:
STB satellite
:
:
Sposta
TV
Conferma
Ritorno
Canale
Nazione
: Italia Belgio
Memorizzazione automatica
Francia
Memorizzazione manuale
Germania
Gestore canale
Italia
Ordina
Olanda
Nome
Spagna
Sintonia fine
LNA
:
Sposta
TV
Conferma
Ritorno
Canale
Nazione
: Italia
Memorizzazione automatica
Memorizzazione manuale
Gestore canale
Ordina
Nome
Sintonia fine
LNA
: Spento
Sposta
Conferma
Ritorno
Memorizzazione automatica
P 1
--
40 MHz
0 %
Avvio
Conferma
Ritorno
Italiano - 13
BN68-01171B-05Ita.indd
13
2008-8-13
11:59:05
TV
Canale
Nazione
: Italia
Memorizzazione automatica
Memorizzazione manuale
Gestore canale
Ordina
Nome
Sintonia fine
LNA
: Spento
TV
Sposta
Conferma
Ritorno
Memorizzazione manuale
Programma
Sistema colore
Sistema audio
Canale
Ricerca
Memorizza
: P 1
: Automatico
: BG
: C
4
: 63 MHz
: ?
Sposta
Conferma
Ritorno
Programma (Numero di programma da assegnare a un canale)
Premere il tasto o fino a quando appare il numero
corretto.
anche possibile selezionare direttamente il numero del canale premendo i tasti numerici
(0~9).
Sistema colore: Automatico/PAL/SECAM/NTSC4.43
Premere il tasto o per selezionare lo standard del colore desiderato.
Sistema audio: BG/DK/I/L
Premere il tasto o per selezionare lo standard audio desiderato.
Canale (Quando si conosce il numero del canale da memorizzare)
Premere il tasto o per selezionare C (canale via antenna) o S (canale via cavo).
Premere il tasto , quindi premere il tasto o per selezionare il numero desiderato.
anche possibile selezionare direttamente il numero del canale premendo i tasti numerici (0~9).
Se laudio anomalo o assente, riselezionare lo standard audio richiesto.
Ricerca (Quando non si conosce il numero del canale)
Premere il tasto o per avviare la ricerca.
Il sintonizzatore effettua la scansione della gamma di frequenza fino a quando appare il primo
canale o il canale selezionato.
Memorizza (Quando si memorizza il canale e il numero di programma corrispondente)
Impostare su OK premendo il tasto ENTER/OK.
del canale
Modalit
P (Programma): Una volta completata la sintonizzazione, alle emittenti della propria area viene
Italiano - 14
BN68-01171B-05Ita.indd
14
2008-8-13
11:59:06
TV
Canale
Nazione
: Italia
Memorizzazione automatica
Memorizzazione manuale
Gestore canale
Ordina
Nome
Sintonia fine
LNA
: Spento
Sposta
TV
Conferma
Ritorno
Gestore canale
Elenco canali
Blocco canali
: Spento
Blocco di canali
Tramite questa funzione possibile impedire agli utenti non autorizzati,
ad esempio i bambini, di guardare programmi non adatti, annullando il
video e azzerando laudio.
6
Sposta
Conferma
P 1 C4
1 / 10
Prog.
0 C - 1 C 4
Ritorno
Elenco canali
Blocco
Conferma
Ritorno
Italiano - 15
BN68-01171B-05Ita.indd
15
2008-8-13
11:59:07
TV
Canale
Nazione
: Italia
Memorizzazione automatica
Memorizzazione manuale
Gestore canale
Ordina
Nome
Sintonia fine
LNA
: Spento
Sposta
TV
Conferma
Ritorno
Ordina
Prog.
0
1
2
3
4
Can Nome
C
C76
C5
C6
C7
Sposta
TV
Conferma
Ritorno
Canale
Nazione
: Italia
Memorizzazione automatica
Memorizzazione manuale
Gestore canale
Ordina
Nome
Sintonia fine
LNA
: Spento
Sposta
TV
Conferma
Ritorno
Nome
Prog.
0
1
2
3
4
Can
C
C76
C5
C6
C7
Sposta
Nome
Conferma
Ritorno
Italiano - 16
BN68-01171B-05Ita.indd
16
2008-8-13
11:59:08
TV
Canale
Nazione
: Italia
Memorizzazione automatica
Memorizzazione manuale
Gestore canale
Ordina
Nome
Sintonia fine
LNA
: Spento
Sposta
Conferma
Ritorno
Sintonia fine
P 1
+3
Reset
Regola
Salva
Ritorno
P 1*
Mono
Immagine
Suono
TS XT SRS
:
: Dinamica
: Personalizzata
: Spento
Ritorno
Italiano - 17
BN68-01171B-05Ita.indd
17
2008-8-13
11:59:08
TV
Immagine
Modalit
: Dinamica
Contrasto 100
Luminosit 45
Nitidezza 75
Colore
55
Tinta
V 50
R 50
Toni colore
: Freddo1
Impostazioni dettaglio
Altro
Sposta
TV
Conferma
Ritorno
Immagine
Dinamica
Modalit
: Dinamica
Standard
Contrasto
100
Film
Luminosit
45
Nitidezza 75
Colore
55
Tinta
V 50
R 50
Toni colore
: Freddo1
Impostazioni dettaglio
Altro
Sposta
Conferma
Ritorno
intensa.
Scegliere Standard per guardare la televisione in
condizioni normali.
Scegliere Film per guardare i film.
TV
Immagine
Modalit
: Dinamica
Contrasto 100
Luminosit 45
Nitidezza 75
Colore
55
Tinta
V 50
R 50
Toni colore
: Freddo1
Impostazioni dettaglio
Altro
TV
Sposta
Conferma
Ritorno
Immagine
Modalit
: Dinamica
Contrasto 100
Luminosit 45
Nitidezza 75
Colore
55
Tinta
V 50
Freddo2 R 50
Toni colore
: Freddo1
Freddo1
Impostazioni dettaglio Normale
Caldo1
Altro
Caldo2
Italiano - 18
BN68-01171B-05Ita.indd
18
2008-8-13
11:59:09
TV
Immagine
Modalit
: Film
Contrasto 80
Luminosit 65
Nitidezza 35
Colore
35
Tinta
V 50
R 50
Toni colore
: Caldo2
Impostazioni dettaglio
Altro
TV
Conferma
Ritorno
Impostazioni dettaglio
Regolazione del nero : Spento
Contrasto Dinamico : Bassa
Gamma
: 0
Bilan bianco
Controllo colore
Migliora imm bordi : Spento
Spazio colore
: Wide
Sposta
Sposta
Conferma
Ritorno
impostata su Standard.
Italiano - 19
BN68-01171B-05Ita.indd
19
2008-8-13
11:59:10
Reset
: OK
DNIe
: Spento
Reset
: OK
BN68-01171B-05Ita.indd
20
2008-8-13
11:59:11
TV
Immagine
Premere il tasto MENU per visualizzare il menu.
Altro
Premere il tasto ENTER/OK per selezionare Immagine.
Formato
: Automatico
Selezionare lopzione desiderata premendo il tasto o ,
Mod schermo
: 16 : 9
Digital NR
: Automatico
quindi premere ENTER/OK.
Active Color
: Acceso
DNIe
: Spento
Le opzioni disponibili sono: Digital NR, Active Color, DNIe,
Movie Plus
: Acceso
Movie Plus
Reset
: OK
Italiano - 21
BN68-01171B-05Ita.indd
21
2008-8-13
11:59:11
Funzioni audio
1
2
TV
Suono
Premere il tasto MENU per visualizzare il menu.
Modalit
: Personalizzata
Premere il tasto o per selezionare Suono, quindi premere
Equalizzatore
il tasto ENTER/OK.
TS XT SRS
: Spento
Volume auto
: Spento
TS XT SRS
: Spento
Equalizzatore: Balance/100Hz/300Hz/1kHz/3kHz/10kHz
Volume auto
: Spento
Mute interno
: Spento
Italiano - 22
BN68-01171B-05Ita.indd
22
2008-8-13
11:59:12
Indicazione a video
Trasmissione normale
(Audio standard)
NICAM
Mono
(Normale)
Stereo NICAM
NICAM
stereo
Mono
(Normale)
NICAM
Stereo
NICAM DUAL-I/II
A2
Stereo
NICAM
Dual-1
NICAM
Dual-2
Trasmissione normale
(Audio standard)
Bilingue o Dual-I/II
Dual I
Stereo
Stereo
Mono
(Normale)
Italiano - 23
BN68-01171B-05Ita.indd
23
2008-8-13
11:59:13
Funzioni orario
1
2
TV
Impostazione
Premere il tasto MENU per visualizzare il menu.
premere ENTER/OK.
Ora
Modalit gioco
: Spento
Melodia
: Spento
ENTER/OK.
PC
Effetto luce
: Spento
quindi premere ENTER/OK.
Altro
Le opzioni disponibili sono: Imposta Ora, Timer stand-by,
Sposta
Conferma
Ritorno
Timer 1, Timer 2, Timer 3
TV
Ora
5 Una volta terminata limpostazione, premere il tasto ENTER/OK.
Imposta Ora
: 00 : 00
6 Premere il tasto EXIT per uscire.
Timer stand-by
: Spento
Imposta Ora
Timer 1
: Disattivato
Timer 2
: Disattivato
possibile impostare lorologio del televisore in modo che
Timer 3
: Disattivato
venga visualizzata lora corrente quando si preme il tasto INFO
del telecomando. necessario impostare lora anche per
utilizzare il timer di accensione o spegnimento automatico.
Premere il tasto o per selezionare Mese, Data, Anno,
Sposta
Conferma
Ritorno
Ora o Minuto. Per impostarli premere il tasto o .
possibile impostare le voci Mese, Data, Anno, Ora
TV
Timer 1
o Minuto premendo direttamente i tasti numerici del
Orario TV on
telecomando.
00 :
00
No
Nel caso in cui si sia verificata una interruzione di corrente
Orario TV off
oppure lunit sia stata scollegata dallalimentazione, le
00 :
00
No
Ripetizione
Volume
impostazioni dellorologio andranno perdute.
Una volta
10
Timer stand-by
Programma
possibile selezionare un intervallo di tempo compreso tra 30 e
01
180 minuti per impostare il passaggio automatico del televisore
Sposta
Regola
Ritorno
in modalitStandby.
Selezionare un tempo di accensione predefinito (Spento, 30,
60, 90, 120, 150 o 180) premendo il tasto o .
Timer 1 / Timer 2 / Timer 3
possibile impostare i timer di accensione/spegnimento in
modo che il televisore si accenda o spenga automaticamente
allora selezionata.
prima necessario impostare lorologio.
Premere il tasto o per selezionare la voce desiderata.
Premere il tasto o per regolare limpostazione.
Orario TV on: Selezionare lora e i minuti, quindi scegliere No/S. Per attivare il timer, scegliere S.
Orario TV off: Selezionare lora e i minuti, quindi scegliere No/S. Per attivare il timer, scegliere S.
Ripetizione: Selezionare Una volta, Ogni giorno, Lun~Ven, Lun~Sab o Sab~Dom.
Volume: Selezionare il volume desiderato.
Programma: Selezionare il canale desiderato.
possibile impostare lora, i minuti e il canale anche premendo i tasti numerici del telecomando.
Italiano - 24
BN68-01171B-05Ita.indd
24
2008-8-13
11:59:14
TV
Impostazione
Premere il tasto MENU per visualizzare il menu.
premere ENTER/OK.
Ora
Modalit gioco
: Spento
Melodia
: Spento
Le opzioni disponibili sono: Lingua, Pagina blu, Melodia,
PC Home theater : Spento
Effetto
luce
: Spento
Effetto luce, Risp. energia, Livello di nero HDMI
Altro
4 Una volta terminata limpostazione, premere il tasto ENTER/OK.
Sposta
Conferma
Ritorno
5 Premere il tasto EXIT per uscire.
TV
Impostazione
Lingua
Altro
Varia in base al modello. Quando si utilizza il televisore per la
Regolazione montaggio a parete
indicatori.
PIP
Italiano - 25
BN68-01171B-05Ita.indd
25
2008-8-13
11:59:14
Ora
Pagina blu
: Spento
premere ENTER/OK.
PC
Italiano - 26
BN68-01171B-05Ita.indd
26
2008-8-13
11:59:15
TV
Impostazione
Altro
Regolazione montaggio a parete
Risp. energia
: Spento
Livello di nero HDMI : Bassa
PIP
Sistema di protezione plasmi
Sposta
Conferma
Ritorno
posizione impostata.
Posizione
Regola
1
INFO
Centrale
Esci
Operazioni
Regolazione dellangolo per il
montaggio a parete
Reset
Italiano - 27
BN68-01171B-05Ita.indd
27
2008-8-13
11:59:16
Visualizzazione in modalitPIP
Allinterno dellimmagine principale possibile visualizzare
unimmagine secondaria. In questo modo, possibile guardare
un programma TV o controllare lingresso video da tutti i
dispositivi collegati.
1 Premere il tasto MENU per visualizzare il menu.
2 Premere il tasto o per selezionare Impostazione, quindi
premere ENTER/OK.
3 Premere il tasto o per selezionare PIP, quindi premere il
tasto ENTER/OK.
4 Selezionare lopzione desiderata premendo il tasto o ,
quindi premere ENTER/OK.
Le opzioni disponibili sono: PIP(Acceso/Spento), Sorgente,
Formato, Posizione, Programma
5 Una volta terminata limpostazione, premere il tasto ENTER/OK.
6 Premere il tasto EXIT per uscire.
PIP: Acceso/Spento
possibile attivare o disattivare la funzione PIP.
possibile selezionare queste opzioni semplicemente
premendo il tasto PIP sul telecomando.
Sorgente: TV/Est.1/Est.2/AV
possibile selezionare la sorgente dellimmagine secondaria.
TV
Impostazione
Altro
Regolazione montaggio a parete
Risp. energia
: Spento
Livello di nero HDMI : Bassa
PIP
Sistema di protezione plasmi
Sposta
TV
Conferma
Ritorno
PIP
PIP
Sorgente
Formato
Posizione
Programma
Sposta
: Acceso
: TV
:
:
: P 1
Conferma
Ritorno
Formato:
/
/
Consente di selezionare il formato dellimmagine secondaria.
Se limmagine principale in modalit PC e Comp., lopzione Formato non disponibile.
Posizione:
/
/
/
Utilizzata per selezionare la posizione dellimmagine secondaria.
Programma
possibile selezionare un canale per limmagine secondaria solo quando lopzione Sorgente
impostata su TV.
Televisore
Est.1 Est.2 AV S-Video Component HDMI PC
analogico
O
O
O
O
O
O
O
O
O
O
O
O
X
X
X
X
X
X
X
X
X
X
X
X
Televisore
digitale
X
X
X
Italiano - 28
BN68-01171B-05Ita.indd
28
2008-8-13
11:59:17
PC
Punti Orizzontali
Linee Verticali
Ora (minuti)
1
1
2 min
TV
Impostazione
Altro
Regolazione montaggio a parete
Risp. energia
: Spento
Livello di nero HDMI : Bassa
PIP
Sistema di protezione plasmi
TV
Sposta
Conferma
Ritorno
TV
Sposta
Conferma
Ritorno
Spostam pixel
Spostam pixel
Punti Orizzontali
Linee Verticali
Ora
Sposta
: Acceso
: 2
: 2
: 2 min
Conferma
Ritorno
TV/Est/AV/S-Video/
Component/HDMI/DTV
2
2
2 min
Il valore Spostam pixel pu variare in base alla dimensione del monitor (pollici) e alla modalit.
Schermo Bianco: Questa funzione consente di rimuovere le immagini persistenti sullo schermo
cambiando il colore dei pixel in bianco. Usare questa funzione in presenza di immagini persistenti
o simboli sullo schermo, specialmente quando stata visualizzata per lungo tempo una immagine
fissa.
Segnale Test: Questa funzione consente di rimuovere le immagini persistenti sullo schermo
spostando tutti i pixel sul PDP in base a una sequenza. Usare questa funzione in presenza di
immagini persistenti o simboli sullo schermo, specialmente quando stata visualizzata per lungo
tempo una immagine fissa.
Grigio: Quando si utilizza il formato 4:3, possibile evitare il rischio di danni allo schermo regolando
il bilanciamento del bianco sullestremit destra e sinistra.
Scuro: Con il formato 4:3, oscura i lati destro e sinistro.
Chiaro: Con il formato 4:3, schiarisce i lati destro e sinistro.
Per rimuovere le immagini persistenti sullo schermo, utilizzare Schermo Bianco o Segnale Test.
Sebbene entrambe le funzioni possano essere utilizzate con successo per rimuovere le immagini
persistenti sullo schermo, Segnale Test la pi efficace.
Per rimuovere completamente le immagini persistenti sullo schermo, la funzione di rimozione
delle immagini persistenti deve essere eseguita per un periodo di tempo prolungato (circa 1 ora).
Qualora le immagini persistenti dovessero rimanere sullo schermo dopo aver eseguito la funzione di
rimozione, ripeterla nuovamente.
Premere un tasto qualsiasi sul telecomando per annullare questa funzione.
Italiano - 29
BN68-01171B-05Ita.indd
29
2008-8-13
11:59:17
Italiano - 30
BN68-01171B-05Ita.indd
30
2008-8-13
11:59:18
Risoluzione
(linea X del
punto)
Frequenza
verticale
(Hz)
Frequenza
izzontale(kHz)
Polarit
verticale
Polarit orizzontale
PS42A417
640 x 350
720 x 400
70.086
70.087
59.940
70.000
72.809
75.000
60.317
70.000
72.188
75.000
60.004
70.069
72.000
75.029
31.469
31.469
31.469
35.000
37.861
37.500
37.879
43.750
48.077
46.875
48.363
56.476
57.672
60.023
N
P
N
N/P
N
N
P
N/P
P
P
N
N
N/P
P
P
N
N
N/P
N
N
P
N/P
P
P
N
N
N/P
P
640 x 480
IBM PC / AT
compatibile
800 x 600
1024 x 768
Italiano - 31
BN68-01171B-05Ita.indd
31
2008-8-13
11:59:18
Impostazione del PC
Impostare la modalit PC premendo il tasto SOURCE.
TV
Impostazione
Plug & Play
Lingua
: Italiano
Ora
Modalit gioco
: Spento
Pagina blu
: Spento
Melodia
: Spento
PC
PC Home theater : Spento
Effetto luce
: Spento
Altro
Sposta
TV
Conferma
Ritorno
PC
Blocco immagine
Posizione
Regolazione auto
Reset immagine
TV
Sposta
Conferma
Ritorno
Blocco immagine
Grossa
Fine
Sposta
TV
Conferma
50
31
Ritorno
Posizione
Sposta
Conferma
Ritorno
Italiano - 32
BN68-01171B-05Ita.indd
32
2008-8-13
11:59:19
Ritorno
Italiano - 33
BN68-01171B-05Ita.indd
33
2008-8-13
11:59:19
Guida
Guida Oggi e Domani
Guida Completa
Elenco programmato
Predefinita
Sposta
: Guida Completa
Conferma
Esci
Canale
Memorizzazione automatica
Memorizzazione manuale
Elenco canali
Sposta
Conferma
Esci
Impostazione
Trasparenza menu : Media
Blocco Canale
Sottotitolo : Acceso
Sposta
Conferma
Esci
Continua...
Italiano - 34
BN68-01171B-05Ita.indd
34
2008-8-13
11:59:20
Lingua
Lingua dellaudio
Lingua del Sottotitolo
Lingua Teletext
Preferenza
Lingua
Lingua dellaudio
Lingua del Sottotitolo
Lingua Teletext
Preferenza
Sposta
Conferma
Esci
Le sottovoci secondarie del menu IC possono variare in base al modello di CAM. (Vedere a pagina 45)
Visualizzazione di informazioni sul programma
Durante la visione di un canale, possibile visualizzare
ulteriori informazioni sul programma corrente.
Durante la visione di un programma, premere il tasto INFO.
Verranno visualizzate le informazioni sul programma.
In particolare, viene indicato:
Grado di blocco del canale
Tipo di video: SD, HD, Radio
Tipo di audio: Mono, Stereo, Dual, Dolby Digital
Presenza di Teletext o sottotitoli DVB
Lingua dellaudio
Per uscire dalla finestra informazioni, premere il tasto INFO.
Tuttii Canali
14:20 - 14:33
Contains video with AFD O; coded frame
is 16:9
Esci
Italiano - 35
BN68-01171B-05Ita.indd
35
2008-8-13
11:59:21
Canale
Il menu costituito da 4 sottomenu:
Memorizzazione automatica, Memorizzazione manuale,
Modifica Canali Preferiti e Elenco canali.
Premere il tasto o per selezionare Canale, quindi
premere il tasto ENTER/OK. Viene visualizzato il menu
Canale.
Canale
Memorizzazione automatica
Memorizzazione manuale
Elenco canali
Sposta
Conferma
Esci
Canale
Memorizzazione automatica
Memorizzazione manuale
Elenco canali
Sposta
Conferma
Ritorno
Memorizzazione automatica
0%
Servizi trovati: 0
Canale: -
Avvio
Ritorno
canale.
Memorizzazione manuale
Canale
Modifica Canali Preferiti
selezionare un canale.
I canali disponibili sono compresi tra 21 e 68. Una volta
selezionato il canale, viene automaticamente impostata
Sposta
Conferma
Ritorno
la frequenza corrispondente.
Frequenza
Memorizzazione manuale
possibile specificare la frequenza (KHz) utilizzando i
tasti numerici (0~9). Se non si conosce esattamente la
Canale Frequenza Larghezza di banda
frequenza, seguire la procedura illustrata in precedenza
5
177500 KHz 7 MHz
per selezionare la frequenza in modo automatico.
Larghezza di banda
Premere il tasto o per selezionare la larghezza di
Ricerca
banda. Le larghezze di banda disponibili sono 7 e 8 MHz.
Regola
Ritorno
Premere il tasto rosso per avviare la scansione dei servizi
digitali. Al termine, i canali vengono aggiornati nellelenco
dei canali.
possibile immettere i valori premendo il tasto sul telecomando.
Non possibile modificare solo la frequenza. Quando si cambia canale, la frequenza viene
automaticamente impostata.
Continua...
Italiano - 36
BN68-01171B-05Ita.indd
36
2008-8-13
11:59:23
Canale
1.3 Modifica Canali Preferiti
possibile modificare i canali preferiti utilizzando i tasti colorati.
Memorizzazione automatica
2
Five
Seleziona tutti: Seleziona tutti i canali attualmente
3
BBC THREE
visualizzati.
4
abc1
5
QVC
Nessuna selez: Deseleziona tutti i canali
selezionati.
Selezionza tutti
Nessuna selez
Anteprima
Anteprima: Visualizza il canale o i canali
Sposta
Selezione
Ritorno
attualmente selezionati.
Modifica Canali Preferiti
Limpostazione dei canali preferiti cos completata.
Aggiungi
1
BBC TWO
Continua...
Italiano - 37
BN68-01171B-05Ita.indd
37
2008-8-13
11:59:24
Elenco canali
1.4 Elenco canali
Tutti i Canali-Tutti
possibile visualizzare un elenco di tutti i canali oppure dei soli BBC TWO
1. Test Card M...
806 arte
40. BBC NEWS24
canali preferiti.
51. BBCi
2. BBC TWO
800 ARD-MHP-DATA
3. Vida003b
Premere il tasto o per selezionare Elenco canali,
801 ARD-OnLine-K..
4. Vida004b
802 BBC ONE
5. Vida005b
quindi premere il tasto ENTER/OK.
803 MDR FERNSE..
6. Vida006b
804 NDR FERNSEH..
7. BBC THREE
anche possibile visualizzarlo semplicemente
30. CBBC Canale
805 Vida002b
premendo il tasto CH LIST.
prec.
Pag. succ.
Preferiti
TV
Premere il tasto giallo per alternare i canali preferiti e tutti i Pag.Sposta
Guarda
Esci
canali.
I canali preferiti vengono visualizzati solo se
precedentemente impostati nel menu Modifica Canali
Preferiti (vedere pagina 37).
Premere il tasto rosso o verde per visualizzare la pagina
precedente o successiva dellelenco dei canali.
Premere il tasto o per selezionare il canale da
sintonizzare, quindi premere il tasto ENTER/OK.
Mentre si cambia il canale, il numero, il nome e unicona del canale vengono visualizzati
nellangolo superiore sinistro. Il numero e il nome del canale vengono visualizzati solo se
il canale incluso nellelenco di tutti i canali. Se invece uno dei canali preferiti, viene
visualizzata licona .
Premere il tasto blu o CH LIST per uscire dallelenco dei canali.
Guarda
Guida Completa
Successivo
Preferiti
Esci
Italiano - 38
BN68-01171B-05Ita.indd
38
Continua...
2008-8-13
11:59:25
2.3 Predefinita
possibile impostare uno stile predefinito per la guida.
Premere il tasto o per selezionare lopzione
desiderata (Att./Succ. o Guida Completa), quindi premere
ENTER/OK. Lopzione predefinita selezionata appare nel
menu EPG e viene visualizzato lelenco dei canali.
Guida
Guida Oggi e Domani
Guida Completa
Elenco programmato
Predefinita
Sposta
: Guida Completa
Conferma
Ritorno
Guida
Guida Oggi e Domani
Guida Completa
Elenco programmato
Predefinita
Sposta
Att./Succ.
: Guida
Completa
Guida Completa
Conferma
Ritorno
Continua...
Italiano - 39
BN68-01171B-05Ita.indd
39
2008-8-13
11:59:27
Guida
Guida Oggi e Domani
Guida Completa
Elenco programmato
Predefinita
Conferma
Ritorno
Attuale
Sposta
: Guida Completa
Guarda
Guida Completa
Successivo
Preferiti
Esci
Watch
Full Guide
3. Lingua
Il menu costituito da 4 sottomenu:
Lingua dellaudio, Lingua del Sottotitolo, Lingua Teletext e
Preferenza.
No
Favourites
Exit
Lingua
Lingua dellaudio
Lingua del Sottotitolo
Lingua Teletext
Preferenza
Sposta
Conferma
Ritorno
Continua...
Italiano - 40
BN68-01171B-05Ita.indd
40
2008-8-13
11:59:28
Lingua
3.2 Preferenza
Il menu costituito da 6 sottomenu:
Lingua dellaudio
Lingua principale audio, Lingua secondaria audio, Lingua
Lingua del Sottotitolo
princip sottotitoli, Lingua second sottotitoli, Lingua
Lingua Teletext
principale Teletext e Lingua secondaria Teletext.
Preferenza
selezionata.
Sposta
Conferma
Ritorno
Le opzioni Lingua dellaudio, Lingua del Sottotitolo
e Lingua Teletext del menu Lingua mostrano lelenco delle lingue supportate dal canale
corrente, dove lopzione corrente appare evidenziata. Se si modifica una di queste opzioni,
la nuova lingua viene applicata solo al canale corrente. La nuova impostazione non viene
invece applicata alle opzioni Lingua principale audio, Lingua princip sottotitoli o Lingua
principale Teletext del menu Preferenza.
Continua...
Italiano - 41
BN68-01171B-05Ita.indd
41
2008-8-13
11:59:29
Impostazione
Il menu costituito da 8 sottomenu:
Trasparenza menu, Blocco Canale, Sottotitolo, Mod
Sottotitoli, Testo digitale, Fuso orario, Formato audio e
Sistema.
4.1 Trasparenza menu
possibile impostare il livello di trasparenza del menu a video.
Premere il tasto o per selezionare lopzione
desiderata (Alta, Media, Bassa o Opaco), quindi premere
ENTER/OK.
Impostazione
Trasparenza menu : Media
Blocco Canale
Sottotitolo : Acceso
Sposta
Conferma
Ritorno
Impostazione
Trasparenza menu : Media
Alto
Blocco Canale Media
Bassa
Sottotitolo : Acceso
Opaco
Mod Sottotitoli : Normale
Formato audio : PCM
Sposta
Conferma
Ritorno
Continua...
Italiano - 42
BN68-01171B-05Ita.indd
42
2008-8-13
11:59:30
Impostazione
4.3 Sottotitolo / Mod Sottotitoli / Formato audio / Testo digitale
possibile impostare il sistema in base alle proprie preferenze
Trasparenza menu : Media
personali.
Blocco Canale
Sistema
Sposta
Conferma
Ritorno
Continua...
Italiano - 43
BN68-01171B-05Ita.indd
43
2008-8-13
11:59:32
4.5 Sistema
Il menu costituito da 5 sottomenu:
Informazioni sul prodotto, Informazioni sul segnale,
Aggiornamento software, Interfaccia comune e Reset.
Informazioni sul prodotto
possibile visualizzare le informazioni sul prodotto. Per
assistenza o riparazioni, si prega di contattare un rivenditore
autorizzato Samsung.
Premere il tasto ENTER/OK dopo avere selezionato
Informazioni sul prodotto. Viene visualizzato il menu
Informazioni sul prodotto.
Versione software / Versione firmware
Informazioni sul segnale
possibile visualizzare informazioni sullo stato del segnale.
Premere il tasto ENTER/OK dopo avere selezionato
Informazioni sul segnale. Vengono visualizzate
informazioni tecniche sullo stato del segnale.
Servizio / ID servizio / Multiplex / Rete / Livello
errore bit / Potenza segnale
Aggiornamento software (opzione)
Gli aggiornamenti del prodotto, contenenti le nuove
funzionalit del televisore digitale, vengono trasmessi
periodicamente tramite il normale segnale televisivo. Il
prodotto rileva automaticamente questi segnali e visualizza
la finestra di aggiornamento del software. Se desiderato,
possibile avviare da questa finestra linstallazione degli
aggiornamenti.
Informazioni sul software
Premere il tasto ENTER/OK. Verr visualizzata la
versione corrente del software. Per visualizzare
le informazioni sulla versione software, premere
nuovamente il tasto ENTER/OK.
Aggiornamento manuale
Premere il tasto ENTER/OK per cercare il nuovo
software sui canali delle emittenti attive.
Aggiornamento modalit Standby: On/Off
Premere il tasto ENTER/OK. Per continuare laggiornamento
del software quando lalimentazione principale attiva,
selezionare On premendo il tasto o .
Laggiornamento viene effettuato 45 minuti dopo
lingresso in modalit Standby. Poich lalimentazione
dellunit si attiva internamente, lo schermo potrebbe
attivarsi per breve tempo. Questo fenomeno
pu continuare per pi di unora, fino al termine
dellaggiornamento software.
Impostazione
Testo digitale
Fuso orario
Sistema
Sposta
Conferma
Ritorno
Sistema
Informazioni sul prodotto
Aggiornamento software
Interfaccia comune
Reset
Sposta
Conferma
Ritorno
Ritorno
Informazioni sul segnale
Servizio: ?
ID assistenza : 0000
Multiplex: ? (TSID 0000,ONID 0000)
Rete: ? (ID 0000)
Livello errore bit:10
Potenza del segnale:0
Ritorno
Aggiornamento software
Aggiornamento manuale
Sposta
Conferma
Ritorno
Continua...
Italiano - 44
BN68-01171B-05Ita.indd
44
2008-8-13
11:59:33
Info sullapplicazione
Interfaccia comune
Installazione della scheda CI
Tipo: CA
a. Acquistate il modulo CI CAM presso il rivenditore
Costruttore: Canal Plus
locale pi vicino o via telefono.
Info: Top Up TV
b. Inserite la scheda IC nella CAM nella direzione
indicata dalla freccia.
c. Inserire la CAM con la scheda IC installata nello slot
di interfaccia comune.
Ritorno
Inserire completamente la CAM nella direzione
Menu IC
indicata dalla freccia in modo che risulti parallela
allo slot.
d. Verificare la visione dellimmagine su un canale a
segnale criptato.
possibile installare la CAM in qualsiasi
momento sia mentre il televisore acceso sia
mentre spento.
Informazioni sullapplicazione
Sposta
Conferma
Esci
Contiene informazioni sulla CAM inserita nello slot IC e
le visualizza.
Premere il tasto ENTER/OK per visualizzare le informazioni sullapplicazione.
CI Menu
Aiuta lutente a selezionare le voci del menu della
alla CAM.
Premere il tasto ENTER/OK. Vengono visualizzate le opzioni del menu selezionato.
Premere il tasto o per selezionare lopzione desiderata, quindi premere ENTER/OK.
Selezionare il menu IC in base alla scheda PC.
Reset
Reset
possibile azzerare i valori memorizzati e ripristinare i valori
ATTENZIONE: tutte le impostazioni dei
di fabbrica.
canali e le preferenze utente andranno
perse e verranno ripristinate le impostazioni
Questa operazione azzera tutte le informazioni sui
di fabbrica. Si consiglia di effettuare
canali e tutte le preferenze utente ripristinando i valori
loperazione di ripristino solo in caso di
gravi problemi.
predefiniti.
Premere il tasto ENTER/OK dopo avere selezionato
Reset. Viene visualizzata la finestra di immissione del
Ritorno
codice PIN.
Immettere il codice PIN a 4 cifre utilizzando i tasti
numerici (0~9). Viene visualizzato un messaggio di
avviso. Per azzerare tutti i valori, premere in sequenza i
tasti colorati (rosso, verde, giallo e blu).
Il PIN predefinito di un nuovo televisore 0-0-0-0.
Quando si cambia il codice PIN nel menu
Blocco Canale, viene modificato automaticamente anche il codice PIN necessario per
reimpostare il sistema.
Al termine del reset, attiva il Plug & Play DTV (Memorizzazione automatica DTV, Fuso orario
del paese selezionato, Time setting (Impostazione orario)) ed esce dalla modalit TV digitale
senza passare alla modalit TV analogica. (Vedere pagina 11)
Italiano - 45
BN68-01171B-05Ita.indd
45
2008-8-13
11:59:34
TV
Cavo HDMI
Dispositivo
Anynet+ 2
Cavo HDMI
Dispositivo
Anynet+ 3
Cavo HDMI
TV
Dispositivo Anynet+ 1 Dispositivo Anynet+ 2
2
Cavo HDMI
Home Theater
Cavo HDMI
Cavo HDMI
Dispositivo Anynet+ 3
Cavo HDMI
Cavo ottico
solo il cavo ottico tra [Digital Audio Out (Optical)] del televisore e Digital Audio Input del
Collegare
ricevitore.
Collegare solo un ricevitore.
altoparlanti del sistema Home Theater possono generare un audio a 5.1 canali. Negli altri casi,
Gli
viene generato un audio stereofonico a 2 canali. Per ascoltare laudio tramite il sistema Home Theater,
assicurarsi di collegare correttamente al televisore il jack Digital Audio IN (Optical) del sistema Home
Theater. Tuttavia, i segnali audio del registratore BD inviati al sistema Home Theater tramite televisore
non vengono riprodotti in formato a 5.1 canali, dato che il televisore supporta solo laudio stereofonico
a 2 canali. Per ulteriori informazioni, si prega di consultare il manuale del sistema Home Theater.
E possibile collegare un dispositivo Anynet+ tramite un cavo HDMI. Alcuni cavi HDMI potrebbero non
supportare le funzioni Anynet+.
Anynet+ si attiva solo quando il relativo dispositivo AV acceso o in modalit Standby.
Anynet+ supporta fino a 8 dispositivi AV.
Italiano - 46
BN68-01171B-05Ita.indd
46
2008-8-13
11:59:35
Configurazione di Anynet+
Le seguenti impostazioni consentono di utilizzare le funzioni
TV
P1
di Anynet+.
Visualizza TV
Uso della funzione Anynet+
Seleziona periferica
Registra
Ricevitore :Off
2 Premere ENTER/OK per selezionare Anynet+ (HDMI-CEC),
quindi premere ENTER/OK.
Impostazione
Sposta
Conferma
3 Premere il tasto o per selezionare Acceso, quindi
Esci
premere ENTER/OK.
La funzione Anynet+ (HDMI-CEC) si attiva.
Impostazione
Se si seleziona Spento, la funzione Anynet+ (HDMI-CEC) si
Anynet+ (HDMI-CEC)
: Spento
Spento
disattiva.
Spegnimento auto
: Spento
Quando Anynet+ (HDMI-CEC) disattivato, sono disattivate
Acceso
anche tutte le relative funzioni.
Ricer disp con
Disattivazione automatica di un dispositivo Anynet+ allo
spegnimento del televisore
Sposta
Conferma
Ritorno
2 Premere il tasto o per selezionare Spegnimento auto,
quindi premere ENTER/OK.
3 Premere il tasto o per selezionare Acceso, quindi
Impostazione
premere ENTER/OK.
Anynet+ (HDMI-CEC)
: Acceso
La funzione di spegnimento automatico si attiva.
Spegnimento auto : Spento
Spento
Selezionare Spento per disattivare la funzione di
spegnimento automatico.
Ricer disp con
Acceso
Premere il tasto EXIT per uscire.
Per utilizzare la funzione Anynet+ necessario impostare il
Sposta
Conferma
Ritorno
tasto di selezione del telecomando su TV.
Se si imposta Spegnimento automatico su Acceso, i dispositivi esterni collegati al televisore si
spengono ogniqualvolta si spegne il televisore. Tuttavia, se il dispositivo in fase di registrazione
potrebbe non spegnersi.
TV
P1
Visualizza TV
DVDR1
DVDR2
DVD1
DVD2
Seleziona periferica
Registra
Menu periferica
Funz dispositivo
Ricevitore :Off
Impostazione
Sposta
Esci
Conferma
Impostazione
Anynet+ (HDMI-CEC)
: Acceso
Spegnimento auto
Acceso
BN68-01171B-05Ita.indd
47
2008-8-13
11:59:35
Menu Anynet+
Il menu Anynet+ pu variare a seconda del tipo e dello stato del dispositivo Anynet+ collegato al
televisore.
Menu Anynet+
Visualizza TV
Seleziona periferica
Registra
Menu periferica
Funz dispositivo
Descrizione
Passa da Anynet+ alla modalit di trasmissione del televisore.
Mostra il dispositivo al quale collegato il televisore.
Avvia la registrazione. (Questo menu si attiva solo se il dispositivo
supporta la funzione di registrazione).
Mostra il menu del dispositivo collegato.
Esempio. Se si collega un registratore DVD, appare il menu
Registratore DVDE.
Mostra il menu di controllo riproduzione del dispositivo collegato.
Esempio. Se si collega un registratore DVD, viene visualizzato il
menu di controllo riproduzione del registratore DVD.
Ricevitore
Impostazione
Dispositivo Anynet+
Stato operativo
Una volta attivato il dispositivo,
quando il menu del dispositivo
corrispondente appare sullo
schermo.
Una volta attivato il dispositivo,
quando si riproduce un file
Tasti disponibili
Tasti numerici
////Tasto ENTER
Tasti colorati
Tasto EXIT
(ricerca allindietro)
(ricerca in avanti)
(Arresto)
(Riproduzione/Pausa)
Tasto CH /
Dispositivo audio
Italiano - 48
BN68-01171B-05Ita.indd
48
2008-8-13
11:59:36
Registra
ENTER/OK.
Menu periferica
Funz dispositivo
Laudio viene trasmesso dal ricevitore.
Ricevitore :On
Controlli da effettuare prima di contattare lassistenza tecnica
Sintomo
Soluzione
Si desidera avviare
Anynet+.
Si desidera uscire da
Anynet+.
Il messaggio Connessione
a un dispositivo Anynet+...
viene visualizzato a
schermo.
Non si riesce ad avviare
la riproduzione sul
dispositivo Anynet+.
Non possibile utilizzare la funzione di riproduzione mentre in corso la funzione Plug &
Play.
BN68-01171B-05Ita.indd
49
2008-8-13
11:59:36
Funzione Teletext
1 TV/DTV
Esce dalla visualizzazione teletext (in base al modello)
2
(indice)
Premere questo tasto in qualsiasi momento per visualizzare la
pagina Indice.
3
6
7
8
9
0
!
(teletext attivo/mix)
Premere questo tasto per attivare la modalit Teletext dopo avere
selezionato un canale che fornisce questo tipo di servizio. Premere
di nuovo il tasto per sovrapporre le informazioni del servizio
Teletext alla trasmissione corrente.
(formato)
Premere questo tasto per raddoppiare le dimensioni delle lettere
nella met superiore dello schermo. Premerlo nuovamente per
applicare la modifica anche alla met inferiore dello schermo.
Premerlo una terza volta per tornare allo schermo normale.
(modo)
Premere questo tasto per selezionare la modalit Teletext (LIST/
FLOF).
Se si preme LIST, viene attivata la modalit di List save (Salva
elenco).
Questa modalit permette di salvare le pagine Teletext utilizzando
il tasto
(store) (salva).
(pagina secondaria)
Visualizza la pagina secondaria disponibile.
(pagina su)
Consente di visualizzare la pagina Teletext successiva.
(pagina gi)
Consente di visualizzare la pagina Teletext precedente.
(annulla)
Utilizzato per visualizzare le stazioni trasmittenti quando si cerca una pagina.
(mostra)
Consente di visualizzare il testo nascosto (risposte a quiz, ad esempio). Per tornare alla modalit di
visualizzazione normale, premere di nuovo il tasto.
Tasti colorati (rosso/verde/giallo/blu)
Se lemittente utilizza un sistema FASTEXT, i diversi argomenti presenti in una pagina sono indicati
con colori diversi e possono essere selezionati premendo i tasti colorati corrispondenti. Premere il
tasto il cui colore corrisponde a quello dellargomento desiderato. La pagina viene visualizzata con
altre informazioni colorate selezionabili in modo analogo.
Per visualizzare la pagina precedente o successiva, premere il tasto colorato corrispondente.
(blocca)
Consente di mantenere visualizzata una pagina, se quella pagina
collegata a pi pagine secondarie che scorrono automaticamente.
Per scorrere le pagine, premere nuovamente il tasto.
(salva)
Utilizzato per memorizzare le pagine del servizio Teletext.
BN68-01171B-05Ita.indd
50
Continua...
2008-8-13
11:59:38
Sommario
Numero della pagina selezionata.
Identit della stazione emittente.
Numero della pagina corrente o stato della ricerca.
Data e ora
Testo.
Informazioni sullo stato.
Informazioni FASTEXT.
1
2
Installare il supporto a parete con un valore di coppia di 15kgfcm o inferiore. Applicando un valore di
coppia diverso da quello indicato i componenti possono subire danni.
Il kit degli accessori contiene un anello di sostegno [] per linstallazione di supporti a parete di altre
marche su televisori Samsung. (Caso B)
Italiano - 51
BN68-01171B-05Ita.indd
51
2008-8-13
11:59:40
Famiglia di prodotti
LCD-TV
PDP-TV
poll.
Spec. VESA (A * B)
Vite standard
23 ~ 26
200 * 100
M4
32 ~ 40
200 * 200
M6
46 ~ 52
600 * 400
57
700 * 400
(No VESA)
57 ~ 70
800 * 400
80 ~
1400 * 800
42 ~ 50
600 * 400
55 ~ 70
800 * 400
63
No VESA
80 ~
1400 * 800
Quantit
4
M8
4
M8
6
4
disponibili kit di montaggio a parete per tutte le dimensioni standard, come mostra la tabella
Sono
precedente.
al kit di montaggio a parete vengono forniti anche un manuale di istruzioni e tutti i
Insieme
componenti necessari per lassemblaggio.
utilizzare viti pi lunghe rispetto alle dimensioni standard, in quanto potrebbero danneggiare
Non
linterno del televisore.
installazioni a parete con viti non conformi agli standard VESA, la lunghezza delle viti pu variare
Per
a seconda delle relative specifiche.
utilizzare viti non conformi agli standard VESA. Non serrare eccessivamente le viti, in quanto
Non
potrebbero danneggiare il prodotto o causarne la caduta con conseguente rischio di infortuni.
Samsung declina ogni responsabilit per questo tipo di incidenti.
a 57 e a 63 non sono conformi alle specifiche VESA. Di conseguenza, con questo modello
Imodelli
necessario utilizzare un kit di montaggio a parete apposito.
Non superare i 15 di inclinazione quando si monta questo televisore.
installare il Supporto a parete mentre il televisore acceso.
InNoncaso
contrario, potrebbero verificarsi incidenti con lesioni personali causate da scosse elettriche.
Italiano - 52
BN68-01171B-05Ita.indd
52
2008-8-13
11:59:40
Continua...
Italiano - 53
BN68-01171B-05Ita.indd
53
2008-8-13
11:59:41
Continua...
Italiano - 54
BN68-01171B-05Ita.indd
54
2008-8-13
11:59:43
Videoregistratore
Marca
SAMSUNG
ADMIRAL
AIWA
AKAI
AUDIO DYNAMICS
BELL&HOWELL
BROKSONIC
CANDLE
CANON
CITIZEN
COLORTYME
CRAIG
CURTIS MATHES
DAEWOO
DB
DIMENSIA
DYNATECH
ELECTROHOME
EMERSON
FISHER
FUNAI
GENERAL ELECTRIC
GO VIDEO
LG(Goldstar)
HARMAN KARDON
HITACHI
INSTANT REPLAY
JC PENNEY
JCL
KENWOOD
KLH
LIOYD
LOGIK
LXI
JVC
MAGNAVOX
MARANTZ
MARTA
KONIA
ORION
MEI
MEMOREX
MGA
MIDLAND
MINOLTA
Codice
000 001 002 003 004 005 077 078 079
020
025
004 027 032
007 026
018
022
002 003 006 008 015 055
021 056
002 003 006 008 015 055
007
002 024
002 007 008 017 021 025 056 064 066
003 010 011 012 013 014 015 016
007 026
017
025
034
001 003 006 021 022 025 030 032 034
040 047 050 052 060 063 065 066 067
069 073
018 024 028 029 048 051 061
025
002 005 017 021 056
002
006 007 008 009 010
007
019 025 041 042 074
021
002 007 018 019 021 026 037 041
054 056
007 008 018 021 026 037
007 008 018 026 037
070
025
038
025
081 082 083
021 056 059
007 008 018 021 026 037 062
006
036
073 074 075 076
021
006 021 024 025
034
005
019 041 075
Marca
MITSUBISHI
MONTGOMERY WARD
MTC
MULTITECH
NEC
OPTIMUS
PANASONIC
PENTAX
PENTEX RESEARCH+
PHILCO
PHILIPS
PIONEER
PORTLAND
PROSCAN
QUARTZ
QUASAR
RADIO SHACK/
REALISTIC
RCA
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHIMTOM
SIGNATURE
SONY
SYLVANIA
SYMPHONIC
TANDY
TASHIKA
TATUNG
TEAC
TECHNICS
TEKNIKA
TMK
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
YAMAHA
ZENITH
Codice
019 034 041 046
020
002 025
002 005 025 038
007 008 018 026 037 062 064
020
021 056 071 072
019 041 075
008
021 056 059
021 080
019 026 039 053
015 049 055
017
018
021 056
006 018 020 021 024 025 029 034
048 056
002 017 019 021 035 041 043 057
068 076
026
018 024
003 047 052 067
006 018 019 024 028 029 041 048 051
020 034 045 015
027 033 038 058
025
027 033 044
021 025 056 059
025
018 025
006
037
025 037 068
021
006 021 025 031
066
003 019 029 051 052
002 006
002
007 026
026
007 026
002
002 003 006 019 020 021 024 025 034
038 041
007 008 018 026 037
023 027 033
Continua...
Italiano - 55
BN68-01171B-05Ita.indd
55
2008-8-13
11:59:43
CABLE BOX
Marca
SAMSUNG
GI
HAMLIN
HITACHI
JERROLD
MACOM
MAGNAVOX
OAK
PANASONIC
PHILIPS
PIONEER
RCA
REGAL
Codice
000 001 002 003 004 005 006 007
041
003 024 031
025 030
038 039
025 030
019 023 028
026
003 022 027 037 044
019 021 023 028
004 018 020 044
014 022 040
003
Marca
REGENCY
SA
SCIENTIFIC ATLAN
SPRUCER
STARGATE 2000
SYLVANIA
TEXSCAN
TOCOM
UNIVERSAL
VIEWSTAR
WARNER AMEX
ZENITH
Codice
015 023
042 043
042 043
022
036
016
016
032
033 034
019 021 023 028
046
017 029 035 037 045
Codice
000 001 002 008 013
000 004 008 013
000 003 008 013
Codice
023
043
018 034
019
035
015 016 017 019 022 045 060
061 062 065 066 067 068
074
069 070
069
018 024 032
027
025 069 070 071
069
069
065
046 047 048 063 064
069
056
022
015 017
020
020
059
063
069 070
Marca
LG(Goldstar)
MAGNAVOX
MEMOREX
MOTOROLA
MACOM
MITSUBISHI
NEXT LEVEL
PHILIPS
PRIMESTAR
PANASONIC
PAYSAT
PROSCAN
RCA
RADIOSHACK
REALISTIC
STS
STAR TRAK
SKY
SKY LIFE
SHACK
STAR CHOICE
SONY
TOSHIBA
ULTIMATE TV
UNIDEN
ZENITH
Codice
044 073
016 021 036 038 039 040 041 042
016
064
018
015
047 048 064
015 016 017 021 033 036 038 039
040 041 042 067
046 049 050 063
058 059 061 062
016
065 066
051 052 053 065 066
064
057
020 027
026
031
005 006 007
064
064
054 060
015 017 028 029 030 072
060 066
016 021 037 055 056 057
024 031 068
Continua...
Italiano - 56
BN68-01171B-05Ita.indd
56
2008-8-13
11:59:43
DVD SAMSUNG
Prodotto
DVD
DVDR
BD Record
VCR COMBO
VCR Record
DHR COMBO
Codice
000 001 002
003 004
005 006
007 008 009 010 011
012
013
Prodotto
Home Theater VCR COMBO
HDD Record COMBO
TWIN TRAY COMBO
STB DVD COMBO
Ricevitore DVD
Ricevitore AV
Codice
014 015 016
017
018
019
020
021
DVD
Marca
ANAM
AUDIOVOX
AUDIOLOGIC
ANABA
APEX DIGITAL
AIWA
BROKSONIC
BLAUPUNKT
B&K
CURTIS MATHES
CYBER HOME
CLARION
CIRRUS
CINEVISION
DAEWOO
DENON
FARENHEIT
FISHER
GPX
GO VIDEO
GE
GREENHILL
HITACHI
HITEKER
HOYO
HARMAN / KARDON
IRT
INTEGRA
JBL
JVC
JATON
KENWOOD
KISS
KONKA
KLH
LG(Goldstar)
LOEWE
LASONIC
MOBILE AUTHORITY
MEMOREX
MALATA
MAGNAVOX
MINTEK
MONYKA
Codice
030
075
085
072
070 071 074 086 083 084 088
111 112
114
062
074
122 123
027
065 077 078 079 082
080 125
081
095
066
146
067 068
090
060
061 089 133 135
069 074
074
064 113
071
073
091 110
089
092
091
022 033 115 116
073
051 108 109
073
059 100 106 107
074 075
025 031
057
058
054
055
056
076 093
074 094
073
Marca
NORCENT
NEXT BASE
NEC
NANTAUS
NESA
OPTOMEDIA ELECTRONICS
OPTIVIEW
ONKYO
PHILCO
PRINCETON
PROSCAN
PANASONIC
PHILIPS
ROTEL
RIO
RCA
RAITE
ROWA
SAMPO
SONY
SHERWOOD
SVA
SYLVANIA
SHARP
SANSUI
SANYO
SHINSONIC
SANYO
THOMSON
TOSHIBA
TECHNICS
TVIEW
TOKAI
TEAC
TECHWOOD
TREDEX
URBAN CONCEPTS
VENTURER
VOCOPRO
YAMAHA
YAMAKAWA
XWAVE
ZENITH
Codice
048 049 050
052
053
144
074
105
072
076 092 119
044 045
046 047
023
024 034 124 134 136 137 138
036 076
117 118
120
023 035 074 075 131 132
073
038
104
026 029 126 127 128 129
130 141
039 041
042
043 093
140
062
062
094
090
145
028 062 076
139
072
073
096
097
098 099 101
076
075
102
032 063
040 073
103
076 121
Italiano - 57
BN68-01171B-05Ita.indd
57
2008-8-13
11:59:44
Avvertenza
Fissare saldamente il televisore al
piedistallo prima di muoverlo.
In caso contrario, potrebbe cadere
causando gravi lesioni.
televisore deve essere
Iltrasportato
da due o pi persone.
Non appoggiare mai il televisore
sul pavimento perch lo schermo
potrebbe subire danni.
Appoggiare sempre il televisore il
posizione diritta.
Italiano - 58
BN68-01171B-05Ita.indd
58
2008-8-13
11:59:47
Specifiche
Le descrizioni e le caratteristiche riportate in questo manuale sono fornite unicamente a scopo
informativo e sono soggette a modifiche senza preavviso.
Nome del modello
PS42A417
Dimensione schermo
(Diagonale)
42 pollici
Risoluzione PC
1024 x 768 @ 60 Hz
Uscita audio
10W X 2
Dimensioni (Lar.xAlt.xPro.)
Corpo
1055 x 700 x 95 mm
1055 x 759 x 316 mm
Con supporto
Peso
Corpo
31 kg
34 kg
Con supporto
Caratteristiche ambientali
Temperatura di esercizio
Umidit di esercizio
Temperatura di stoccaggio
Umidit di stoccaggio
Italiano - 59
BN68-01171B-05Ita.indd
59
2008-8-13
11:59:48
Schema blocco
Italiano - 60
BN68-01171B-05Ita.indd
60
2008-8-13
11:59:52
BN68-01171B-05Ita.indd
61
2008-8-13
11:59:52
Espaol -
BN68-01743A_05Spa.indd
2008-8-13
11:52:58
ndice
Informacin general
Funciones de hora......................................... 24
Idioma/Pantalla azul/Meloda/LED azul/
Ahorro de energa/Nivel de negro HDMI........ 25
Uso del modo de juego.................................. 26
Ajuste de montaje en la pared (se vende por
separado)....................................................... 27
Visualizacin de imagen en imagen (PIP)..... 28
Proteccin de pantalla inactiva...................... 29
Funcionamiento
Apagado y encendido del televisor.................. 9
Visualizacin de los mens............................ 10
Funcin Plug & Play....................................... 10
Visualizacin de las fuentes de seales
externas......................................................... 12
Edicin de los nombres de los dispositivos... 13
Control de la imagen
Acerca de Anynet+
Qu es Anynet?........................................... 46
Conexin de dispositivos Anynet+................. 46
Configuracin de Anynet+.............................. 47
Bsqueda y cambio de dispositivos Anynet+... 47
Grabacin...................................................... 48
Escucha a travs de un receptor................... 49
Compruebe estos puntos antes de solicitar
servicio tcnico.............................................. 49
Apndice
Funcin de teletexto (segn el modelo)......... 50
Preparacin para instalar el montaje mural... 51
Especificaciones del equipo de montaje
mural (VESA)................................................. 52
Configuracin del mando a distancia............. 53
Cmo montar la base del soporte (segn el
modelo).......................................................... 58
Solucin de problemas.................................. 58
Especificaciones............................................ 59
Importante
Nota
Smbolos
Pulse
Espaol
Pantalla de PC
Espaol -
BN68-01743A_05Spa.indd
2008-8-13
11:52:59
Mando a distancia/
Pilas AAA
Cable de
alimentacin
Pao de limpieza
Tarjeta de garanta/
Manual de seguridad
(No est disponible en
todas las ubicaciones.)
Tapa-Inferior/Dos tornillos
(Consulte la pgina 58)
Ncleo de ferrita
para cable de
alimentacin
Ncleo de
ferrita
para S-Vdeo
Ncleo de ferrita
para el cable de
los auriculares
Cable de S-Vdeo
Cable de la antena
Cables de los
componentes
Cables de audio
Cable de vdeo
Cable de PC
Cable Scart
(Euroconector)
Cable de audio de PC
Cable HDMI
Cable HDMI/DVI
-20 ~ 20
Espaol -
BN68-01743A_05Spa.indd
2008-8-13
13:37:10
Panel de control
Panel frontal (o lateral)
(ENTER)
En el men en pantalla, utilice este botn
como lo hara con el botn ENTER del mando
a distancia.
El botn de encendido
Plselo para encender o apagar el TV.
Indicador de encendidoParpadean y se
apagan cuando se enciende el aparato y se
ilumina en el modo en espera.
3
+
Plselos para subir o bajar el volumen.En el
men en pantalla, use los botones
+
del mismo modo que los botones y del
mando a distancia.
4
C/P.
Permiten cambiar de canal. En el men en
pantalla, use los botones
C/P.
del mismo modo que los botones y del
mando a distancia.
Espaol -
BN68-01743A_05Spa.indd
2008-8-13
11:53:02
Panel de conexiones
Panel lateral
1
2
o
Panel posterior
1
Red de televisin
por cable
8
o
BN68-01743A_05Spa.indd
Contina
2008-8-13
11:53:06
1 POWER IN
Conexin para el cable de alimentacin
suministrado.
2 Conexin de dispositivos de audio
externos
Puede conectar las seales de audio desde el
televisor a una fuente externa, como un equipo
de audio.
3 EXT 1, EXT 2
Tomas de entrada o salida para dispositivos
externos, como aparatos de vdeo,
reproductores de DVD, consolas de
videojuegos o reproductores de videodiscos.
Especificaciones de entrada/salida
Conector
Entrada
Vdeo Audio(L/R) RGB
EXT 1
EXT 2
Salida
Vdeo + Audio (L/R)
Slo est disponible la
salida de TV o DTV.
La salida que puede elegir.
4 COMPONENT IN
Entradas de audio (AUDIO L/R) y vdeo (Y/PB/
PR) para componentes.
5 DIGITAL AUDIO OUT (OPTICAL)
Conexin para un componente de audio
digital.
6 SERVICE
Conector para servicio.
Conecte un terminal serie entre
el soporte del montaje mural ajustable
elctricamente y el televisor cuando se
desee ajustar el ngulo de visualizacin del
televisor mediante el mando a distancia.
7 PC IN / AUDIO
Se conecta a la toma de salida de audio y
vdeo del PC.
8 Ranura COMMON INTERFACE
Inserte la tarjeta CI (Interfaz comn) en la
ranura. (consulte la pgina 45).
Si no se inserta una TARJETA CI con
algunos canales, en la pantalla aparece
Seal codificada.
En 2 o 3 minutos aparecer en la pantalla
la informacin del enlace que contiene
un nmero telefnico, un identificador de
TARJETA CI, un identificador del sistema y
dems informacin. Si aparece un mensaje
de error, pngase en contacto con su
proveedor de servicios.
Una vez completada la configuracin de la
informacin del canal, aparecer el mensaje
Actualiz. completa, indicando que la lista
de canales ya se ha actualizado.
Inserte la tarjeta CI en la direccin
marcada sobre ella.
9 HDMI IN 1, HDMI IN 2
Conexin HDMI de un dispositivo que tenga
salida HDMI. Estas entradas se pueden
utilizar tambin como una conexin DVI con
entradas de seales de audio analgicas
independientes. Para realizar esta conexin
se requiere un cable opcional HDMI/DVI.
Cuando se usa un adaptador HDMI/DVI, las
entradas de seales de audio analgicas
DVI del televisor permiten recibir seales de
audio por las entradas derecha e izquierda
desde un dispositivo DVI. (No es compatible
con un PC)
Cuando conecte este equipo a un
decodificador, un reproductor de DVD, una
consola de juegos, etc., a travs de HDMI
o DVI, debe comprobar que el modo de
salida de vdeo sea compatible como se
muestra en la tabla inferior. Un error de
compatibilidad puede causar distorsin o
ruptura de la imagen o que sta no se vea.
No intente conectar en la toma HDMI/DVI
una tarjeta grfica de un PC o un ordenador
porttil. (Slo se conseguir una pantalla en
blanco.)
DVI IN (HDMI 2) AUDIO L/R
Salidas de audio DVI para dispositivos
externos.
0 ANT IN
Conector coaxial de 75 para antena o red
por cable.
Modos compatibles con HDMI y componentes
HDMI/DVI 50 Hz
HDMI/DVI 60 Hz
Componente
Espaol -
BN68-01743A_05Spa.indd
2008-8-13
11:53:06
pausa.
El exceso de luz puede influir en el rendimiento del mando a distancia.
1 Botn POWER
Enciende o apaga el TV.
2 Botones numricos para
acceso directo a los canales
3 Seleccin del canal con uno/
dos dgitos
4 Botn de control de los
canales (consulte la pgina
15)
5 Selecciona directamente los
modos TV y DTV
6
Subir el volumen
Bajar el volumen
7 Interrupcin momentnea
del sonido
8 Muestra el men principal en
pantalla
9 Vuelve al men anterior
@ Seleccin del tamao de la
imagen
# Visualizacin de la Gua
electrnica de programas
(EPG)
$ Seleccin del modo de
sonido
% Configuracin del mando a
distancia
^ Selecciona el dispositivo
destino que debe controlar el
mando a distancia Samsung
(TV, DVD, decodificador,
cable, vdeo)
& Pulse para encender la luz
de fondo de VOL, CH y el
botn de fuente activa (TV,
DVD, CABLE, STB, VCR) en
el mando a distancia.
* Seleccin de fuente
disponible
( Canal anterior
) Mostrar el men DTV
a Graba emisiones en directo
b Funciones de vdeo y
DVD (Rebobinar, Detener,
Reproducir/Pausa, Avance
Rpido)
c
Canal siguiente
Canal anterior
d Sale del men en pantalla
e Controla el cursor en el
men
Contina
Espaol -
BN68-01743A_05Spa.indd
2008-8-13
11:53:07
Espaol -
BN68-01743A_05Spa.indd
2008-8-13
11:53:08
TV
Imagen
Modo
: Dynamic
Contrast 100
Brightness 45
Sharpness 75
Colour
55
Tint
G 50
R 50
Colour Tone
: Cool1
Detailed Settings
Ms
Mover
Entrar
Salir
Entrar
Volver
Espaol
Nederlands
Portugus
Idioma
Mover
Entrar
Omitir
Mover
Casa
Entrar
Omitir
Entrar
Omitir
Mover
Blgica
Francia
Alemania
Italia
Entrar
Omitir
Contina
Espaol - 10
BN68-01743A_05Spa.indd
10
2008-8-13
11:53:09
7
8
10
11
12
13
14
Contina
Espaol - 11
BN68-01743A_05Spa.indd
11
2008-8-13
11:53:10
Fecha
Ao
01
15
2007
Hora
Minuto
12
00
Ajustar
Mover
Selecc.
Omitir
Disfrutar su visin
Aceptar
TV
Configuracin
Hora
Modo Juego
: Desactivado
Pantalla azul
: Desactivado
Meloda
: Desactivado
PC
Mover
Entrar
Volver
TV
Entrada
Fuentes
: TV
Editar nombre
Anynet+
Mover
TV
Entrar
Volver
Fuentes
TV
Ext.1
Ext.2
AV
S-Vdeo
Componente
PC
HDMI1
HDMI2
HDMI3
DTV
Mover
:
:
:
:
:
:
:
:
:
:
Entrar
Volver
Espaol - 12
BN68-01743A_05Spa.indd
12
2008-8-13
11:53:12
Entrada
TV
Fuentes
: TV
Editar nombre
Anynet+
TV
Entrar
Volver
Editar nombre
Ext.1
Ext.2
AV
S-Vdeo
Componente
PC
HDMI1
HDMI2
HDMI3
Mover
:
: Vdeo
: DVD
: D-VHS
:
Cable STB
:
HD STB
:
Satlite STB
:
:
Mover
TV
Entrar
Volver
Canal
Blgica
Pas
: Blgica
Guardado automtico
Francia
Guardado manual Alemania
Gestor de canales
Italia
Ordenar
Holanda
Nombre
Espaa
Sintonizacin fina
LNA
: Desactivado
Mover
TV
Entrar
Volver
Canal
Pas
: Blgica
Guardado automtico
Guardado manual
Gestor de canales
Ordenar
Nombre
Sintonizacin fina
LNA
: Desactivado
Mover
Entrar
Volver
Guardado automtico
P 1
--
40 MHz
0 %
Empezar
Entrar
Volver
Espaol - 13
BN68-01743A_05Spa.indd
13
2008-8-13
11:53:13
TV
Canal
Pas
: Blgica
Guardado automtico
Guardado manual
Gestor de canales
Ordenar
Nombre
Sintonizacin fina
LNA
: Desactivado
TV
Mover
Entrar
Volver
Guardado manual
programa
: P 1
Sistema de color : Automtico
Sistema de sonido : BG
Canal
: C
4
Buscar
: 63 MHz
Guardar
: ?
de canal
Modo
P (Modo de programa): Al finalizar la sintonizacin, las estaciones de emisin de su zona
se habrn asignado a los nmeros de posicin de P00 a P99. Puede seleccionar un canal
introduciendo el nmero de posicin en este modo.
C (Modo de canal areo): Puede seleccionar un canal introduciendo el nmero asignado a cada
emisora area de este modo.
S (Modo de canal por cable): puede seleccionar un canal introduciendo el nmero asignado a
cada canal por cable de este modo.
Espaol - 14
BN68-01743A_05Spa.indd
14
2008-8-13
11:53:13
TV
canales fcilmente.
1 Pulse el botn MENU para ver el men.
2 Pulse los botones o para seleccionar Canal y, a
continuacin, pulse el botn ENTER/OK.
3 Pulse los botones o para seleccionar Gestor de
canales y, a continuacin, pulse el botn ENTER/OK.
Adicin de canales
Mediante la lista de canales, se pueden aadir canales.
4
5
Canal
Pas
: Blgica
Guardado automtico
Guardado manual
Gestor de canales
Ordenar
Nombre
Sintonizacin fina
LNA
: Desactivado
Mover
TV
Entrar
Volver
Gestor de canales
Lista de canales
Seguridad para nios : Desactivado
Bloqueo de canales
Esta funcin permite bloquear el vdeo y el audio para evitar
que los usuarios no autorizados (por ejemplo, los nios) puedan ver
programas poco recomendables.
Mover
Entrar
Volver
Lista de canales
P 1 C4
1 / 10
Prog.
Bloquear
Entrar
Volver
Espaol - 15
BN68-01743A_05Spa.indd
15
2008-8-13
11:53:15
TV
Canal
Pas
: Blgica
Guardado automtico
Guardado manual
Gestor de canales
Ordenar
Nombre
Sintonizacin fina
LNA
: Desactivado
Mover
TV
Entrar
Volver
Ordenar
Prog.
0
1
2
3
4
Canal Nombre
C
C76
C5
C6
C7
Mover
TV
Entrar
Volver
Canal
Pas
: Blgica
Guardado automtico
Guardado manual
Gestor de canales
Ordenar
Nombre
Sintonizacin fina
LNA
: Desactivado
Mover
TV
Entrar
Volver
Nombre
Prog.
0
1
2
3
4
Canal
C
C76
C5
C6
C7
Mover
Nombre
Entrar
Volver
Espaol - 16
BN68-01743A_05Spa.indd
16
2008-8-13
11:53:15
Canal
Pas
: Blgica
Guardado automtico
Guardado manual
Gestor de canales
Ordenar
Nombre
Sintonizacin fina
LNA
: Desactivado
Mover
Entrar
Volver
Sintonizacin fina
P 1
+3
Restabl.
Ajustar
Guardar
Volver
P 1*
Mono
Imagen
Sonido
SRS TS XT
:
: Dinmico
: Personal
: Desactivado
Pas
: Blgica
Guardado automtico
Ordenar
seal de entrada.
Nombre
Sintonizacin fina
Espaol - 17
BN68-01743A_05Spa.indd
17
2008-8-13
11:53:16
TV
Imagen
Modo
: Dinmico
Contraste 100
Brillo 45
Nitidez 75
Color
55
Matiz
V 50
R 50
Tono de color
: Fro1
Configuracin detallada
Ms
Mover
TV
Entrar
Volver
Imagen
Dinmico
Modo
: Dinmico
Estndar
Contraste
100
Pelcula
Brillo
45
Nitidez 75
Color
55
Matiz
V 50
R 50
Tono de color
: Fro1
Configuracin detallada
Ms
Mover
Entrar
Volver
Configuracin detallada
continuacin, pulse el botn ENTER/OK.
Ms
Modos disponibles: Dinmico, Estndar, Pelcula.
Mover
Entrar
Volver
5 Seleccione la opcin adecuada pulsando los botones o y,
a continuacin, pulse el botn ENTER/OK.
TV
Imagen
6 Cuando est satisfecho con los ajustes, pulse el botn
Modo
: Dinmico
Contraste 100
ENTER/OK.
Brillo 45
7 Pulse el botn EXIT para salir.
Nitidez 75
Color
55
Contraste Brillo Nitidez Color Matiz
Matiz
V 50
Fro2 R 50
Tono de color
: Fro1 Fro1
En los modos TV, AV, S-Vdeo del sistema PAL, no se
Configuracin detallada Normal
puede usar la funcin Matiz.
Clido1
Ms
Clido2
Contraste Brillo Tono de color: Modo PC
Mover
Entrar
Volver
Pulse los botones o hasta que alcance la configuracin
ptima.
Tono de color: Fro2/Fro1/Normal/Clido1/Clido2
Cuando el modo de la imagen est configurado como Dinmico o Estndar, Clido1 y Clido2
no se pueden seleccionar.
Restablecer: Cancelar/Aceptar
Seleccione Aceptar. Puede volver a los ajustes de imagen predefinidos de fbrica.
La funcin de restablecimiento se define para cada modo de imagen y tono de color.
Espaol - 18
BN68-01743A_05Spa.indd
18
2008-8-13
11:53:17
TV
Imagen
Modo
: Pelcula
Contraste 80
Brillo 65
Nitidez 35
Color
35
Matiz
V 50
R 50
Tono de color
: Clido2
Configuracin detallada
Ms
TV
Entrar
Volver
Configuracin detallada
Ajuste del negro : Desactivado
Contraste dinm. : Bajo
Gamma
: 0
Balance de blanco
Mi ctrl de color
Mover
Mover
Entrar
Volver
el modo Estndar.
Espaol - 19
BN68-01743A_05Spa.indd
19
2008-8-13
11:53:17
BN68-01743A_05Spa.indd
20
2008-8-13
11:53:18
Digital NR
: Automtico
a continuacin, pulse el botn ENTER/OK.
Color activo
: Activado
DNIe
: Desactivado
Opciones disponibles: Digital NR, Color activo , DNIe, Mejor
Mejor cine
: Activado
cine
Restablecer
: Aceptar
Congelacin de la imagen actual
Espaol - 21
BN68-01743A_05Spa.indd
21
2008-8-13
11:53:19
Funciones de sonido
1
2
TV
Sonido
Pulse el botn MENU para ver el men.
Modo
: Personal
Pulse los botones o para seleccionar Sonido y, a
Ecualizador
Espaol - 22
BN68-01743A_05Spa.indd
22
2008-8-13
11:53:20
Indicacin en pantalla
Emisin normal
(Audio estndar)
NICAM
Mono
(Normal)
NICAM estreo
NICAM
estreo
Mono
(Normal)
NICAM
Estreo
NICAM DUAL-I/II
A2
Estreo
NICAM
Dual-1
NICAM
Dual-2
Emisin normal
(Audio estndar)
Bilinge o Dual-I/II
Dual-I
Estreo
Estreo
Mono
(Normal)
Espaol - 23
BN68-01743A_05Spa.indd
23
2008-8-13
11:53:20
Funciones de hora
1
2
TV
Configuracin
Pulse el botn MENU para ver el men.
Modo Juego
: Desactivado
3 Pulse los botones o para seleccionarHora y, a
Pantalla azul
: Desactivado
Meloda
: Desactivado
continuacin, pulse el botnENTER/OK.
PC
Ajustar hora
: :
Temp. de desc.
: Desactivado
6 Pulse el botn EXIT para salir.
Temporizador 1 : Inactivated
Temporizador 2 : Inactivated
Ajustar hora
Temporizador 3 : Inactivated
Se puede ajustar el reloj del televisor para que aparezca la hora
cuando pulse el botn INFO en el mando a distancia. Tambin
debe establecer la hora si desea utilizar los temporizadores de
conexin y desconexin automticas.
Pulse los botones o para seleccionar Mes, Fecha,
Mover
Entrar
Volver
Ao, Hora o Minuto. Ajuste estos valores pulsando los
TV
Temporizador 1
botones o .
On Timer 12 : 00
No
Puede ajustar directamente Mes, Fecha, Ao, Hora o
Minuto con los botones numricos del mando a distancia.
Off Timer 12 : 00
No
Si se produce una interrupcin en la alimentacin elctrica
Repetir
Una vez
o se desconecta el aparato, se pierde la configuracin del
Volumen 10 Programme
3
reloj.
Temp. de desc.
Puede seleccionar un perodo de tiempo entre 30 y 180
Mover
Ajustar
Volver
minutos para que, cuando transcurran, el televisor pase
automticamente al modo de espera.
Seleccione el tiempo de intervalo preestablecido
(Desactivado, 30, 60, 90, 120, 150 o 180) que se mantendr
encendido con los botones o .
Temporizador 1 / Temporizador 2 / Temporizador 3
Los temporizadores de encendido o apagado se pueden
configurar para que el televisor se encienda y se apague automticamente a la hora seleccionada.
Debe ajustar el reloj en primer lugar.
Pulse los botones o para seleccionar el elemento adecuado.
Pulse los botones o para ajustar el valor.
Hora encendido: Seleccione la hora, los minutos y No/ S. (Para activar el temporizador con la
configuracin deseada, establzcalo en S.)
Hora apagado: Seleccione la hora, los minutos y No / S. (Para activar el temporizador con la
configuracin deseada, establzcalo en S.)
Repetir: Seleccione Una vez, Cada da, Lun~Vie, Lun~Sb o Sb~Dom.
Volumen: Seleccione el nivel de volumen deseado.
Programa: Seleccione el canal deseado.
Puede ajustar la hora, los minutos y el canal directamente pulsando los botones numricos del
mando a distancia.
automtico
Apagado
Si el temporizador se ajusta en Activado, el televisor se apagar si no se pulsa ningn botn
durante 3 horas, despus que el temporizador lo haya puesto en marcha. Esta funcin slo est
disponible en el modo Activado del temporizador y evita el recalentamiento que se puede producir
si el televisor est encendido durante demasiado tiempo.
Espaol - 24
BN68-01743A_05Spa.indd
24
2008-8-13
11:53:21
TV
Configuracin
Pulse el botn MENU para ver el men.
Modo Juego
: Desactivado
3 Seleccione la opcin adecuada pulsando los botones o y,
Pantalla azul
: Desactivado
Meloda
: Desactivado
a continuacin, pulse el botn ENTER/OK.
PC
Opciones disponibles: Idioma, Pantalla azul, Meloda, LED
PC cine en casa : Desactivado
Efecto
de
luz
: Desactivado
azul, Ahorro energa, N.neg HDMI.
Ms
4 Cuando est satisfecho con los ajustes, pulse el botn ENTER/
Mover
Entrar
Volver
OK.
TV
Configuracin
5 Pulse el botn EXIT para salir.
Ms
Idioma
Ajuste del montaje mural
Espaol - 25
BN68-01743A_05Spa.indd
25
2008-8-13
11:53:22
Idioma
: Espaol
Modo Juego
: Desactivado
1 Pulse el botn MENU para ver el men.
Pantalla azul
: Desactivado
2 Pulse los botones o para seleccionar Configuracin y, a
Meloda
: Desactivado
PC
Espaol - 26
BN68-01743A_05Spa.indd
26
2008-8-13
11:53:22
Acceso al men
1
2
3
TV
Configuracin
Ms
Ajuste del montaje mural
Ahorro energa
: Desactivado
N.neg HDMI
: Bajo
PIP
Mover
Ajustar
Botn
Volver
Posicin1
Posicin
Entrar
1
INFO
Central
Salir
Funcin
Ajuste del ngulo del montaje
en la pared
Restablecer
Memorizacin de la posicin
y movimiento a la posicin
memorizada
Espaol - 27
BN68-01743A_05Spa.indd
27
2008-8-13
11:53:23
PIP
Fuente
Opciones disponibles: PIP (Activado/Desactivado), Fuente,
Tamao
:
Programa
: P 1
TV
Ext.1 Ext.2 AV S-Vdeo Componente HDMI PC TV digital
analgica
O
O
O
O
O
O
O
O
O
O
O
O
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Espaol - 28
BN68-01743A_05Spa.indd
28
2008-8-13
11:53:24
TV
Configuracin
Ms
Ajuste del montaje mural
Ahorro energa
: Desactivado
N.neg HDMI
: Bajo
PIP
TV
Mover
Entrar
Volver
Mover
Entrar
Volver
TV
Cambio pxel
Puntos Horiz.
Lineas verticales
Hora
: Activado
: 2
: 2
: 2 min
PC
Puntos Horiz.
1
Lneas verticales
1
Hora en (minutos) 2 min
TV/Ext/AV/S-Vdeo/
Componente/HDMI/DTV
2
2
2 min
Mover
Entrar
Volver
El valor Cambio pxel (Pixel Shift) puede variar segn el tamao (pulgadas) del monitor y el modo.
Pantalla blanca: Esta funcin ayuda a suprimir los restos de imgenes en la pantalla cambiando
el color de los pxeles a blanco. Utilice esta funcin si hay restos de imgenes o smbolos en la
pantalla, especialmente despus de haber mostrado una imagen fija en la pantalla durante un largo
tiempo.
Patrn de seal: Esta funcin ayuda a suprimir los restos de imgenes en la pantalla moviendo
todos los pxeles de la PDP de acuerdo con un patrn. Utilice esta funcin si hay restos de imgenes
o smbolos en la pantalla, especialmente despus de haber mostrado una imagen fija en la pantalla
durante un largo tiempo.
Lateral gris: Cuando se ve la televisin con una relacin de pantalla de 4:3, sta se puede proteger
de un posible dao si se ajusta el balance de blanco en ambos extremos, el izquierdo y el derecho.
Oscuro: Cuando se establece una relacin de pantalla de 4:3, con esta opcin se oscurecen
ambos extremos, el izquierdo y el derecho.
Claro: Cuando se establece una relacin de pantalla de 4:3, con esta opcin se aclaran ambos
extremos, el izquierdo y el derecho.
Si desea suprimir los restos de imgenes de la pantalla, utilice las funciones Pantalla blanca o
Patrn de seal. Aunque ambas suprimen los restos de imgenes de la pantalla, la funcin Patrn
de seal es ms efectiva.
La funcin de borrado de restos de imgenes debe ser larga (aproximadamente 1 hora) para que la
supresin sea efectiva. Si los restos de imgenes no desaparecen despus de ejecutar la funcin,
repita el proceso.
Pulse cualquier botn del mando a distancia para cancelar esta funcin.
Espaol - 29
BN68-01743A_05Spa.indd
29
2008-8-13
11:53:25
Espaol - 30
BN68-01743A_05Spa.indd
30
2008-8-13
11:53:25
Frecuencia
horizontal
(kHz)
31.469
31.469
31.469
35.000
37.861
37.500
37.879
43.750
48.077
46.875
48.363
56.476
57.672
60.023
Polaridad
vertical
Polaridad
horizontal
PS42A417
N
P
N
N/P
N
N
P
N/P
P
P
N
N
N/P
P
P
N
N
N/P
N
N
P
N/P
P
P
N
N
N/P
P
Espaol - 31
BN68-01743A_05Spa.indd
31
2008-8-13
11:53:25
TV
Configuracin
Plug & Play
Idioma
: Espaol
Hora
Modo Juego
: Desactivado
Pantalla azul
: Desactivado
Meloda
: Desactivado
PC
Mover
Entrar
TV
Volver
PC
Bloqueo de Imagen
Posicin
Ajuste automtico
Restablecer imagen
TV
Mover
Entrar
Volver
Bloqueo de Imagen
Grueso
Fino
Mover
TV
50
31
Entrar
Volver
Posicin
Mover
Entrar
Volver
Autoajuste en proceso
Espere por favor
Espaol - 32
BN68-01743A_05Spa.indd
32
2008-8-13
11:53:26
Idioma
: Espaol
Espaol - 33
BN68-01743A_05Spa.indd
33
2008-8-13
11:53:26
Gua
Gua actual y prxima
Gua completa
Lista programada
Mover
Entrar
Salir
Canal
Guardado automtico
Guardado manual
Lista de canales
Mover
Entrar
Salir
Configuracin
Transparencia de mens : Medio
Bloqueo paterno
Subttulos : Activado
Mover
Entrar
Salir
Contina
Espaol - 34
BN68-01743A_05Spa.indd
34
2008-8-13
11:53:27
Idioma
Idioma de audio
Idioma de los subttulos
Idioma del teletexto
Preferencias
Idioma principal audio
Idioma secundario audio
Idioma principal de los subttulos
Idioma secundario de los subttulos
Idioma principal del teletexto
Idioma secundario del teletexto
Idioma
Idioma de audio
Idioma de los subtdtulos
Idioma del teletexto
Preferencia
Mover
Entrar
Salir
Salir
Espaol - 35
BN68-01743A_05Spa.indd
35
2008-8-13
11:53:28
Canal
Este men incluye 4 submens:
Guardado automtico, Guardado manual, Editar canales
favoritos y Lista de canales.
Pulse los botones o para seleccionar Canal y, a
continuacin, pulse el botn ENTER/OK. Se visualiza el
men Canal.
Canal
Guardado automtico
Guardado manual
Lista de canales
Mover
Entrar
Salir
Canal
Guardado automtico
Guardado manual
Lista de canales
Mover
Entrar
Volver
Guardado automtico
0%
Servicios encontr. 0
Canal: -
Empezar
Volver
especificar el canal.
Guardado manual
Canal
Editar canales favoritos
seleccionar un canal.
Los canales disponibles son 21~68. La frecuencia
correspondiente a cada canal seleccionado se ajusta
Mover
Entrar
Volver
automticamente.
Frecuencia
Guardado manual
Puede especificar la frecuencia (KHz) con los botones
numricos (0~9). Para conocer la frecuencia exacta, siga
Canal Frecuencia Ancho de banda
5
177500 KHz 7 MHz
los pasos anteriores para seleccionar automticamente
la frecuencia que usa el canal.
Ancho de banda
Pulse los botones o para seleccionar un ancho de
Buscar
banda. Los anchos de banda disponibles son 7 y 8 MHz.
Ajustar
Volver
Pulse el botn rojo para iniciar la bsqueda de los servicios
digitales. Una vez finalizada, la lista de canales se
actualiza automticamente.
Se puede acceder pulsando el botn del mando a distancia.
La frecuencia no se puede cambiar independientemente; cuando se cambia el canal sta se
cambia automticamente.
Contina
Espaol - 36
BN68-01743A_05Spa.indd
36
2008-8-13
11:53:30
Canal
1.3 Editar canales favoritos
Mediante los botones de colores se pueden editar los canales
Guardado automtico
favoritos.
Guardado manual
el botn ENTER/OK.
Lista de canales
2
Five
ENTER/OK.
3
BBC THREE
Selec. todos: Se seleccionan todos los canales
4
abc1
5
QVC
mostrados.
completado.
2
BBC THREE
Aadir
3
abc1
Contina
Espaol - 37
BN68-01743A_05Spa.indd
37
2008-8-13
11:53:31
Gestor de canales
1.4 Lista de canales
Todos los canales
Puede mostrar una lista de todos los canales o de los favoritos. BBC TWO
1. Test Card M...
806 arte
40. BBC NEWS24
Pulse los botones o para seleccionar Lista de
51. BBCi
2. BBC TWO
800 ARD-MHP-DATA
3. Vida003b
canales y, a continuacin, pulse el botn ENTER/OK.
801 ARD-OnLine-K..
4. Vida004b
802 BBC ONE
5. Vida005b
La lista tambin se puede mostrar pulsando el botn
803 MDR FERNSE..
6. Vida006b
804 NDR FERNSEH..
7. BBC THREE
CH LIST.
30. CBBC Channel
805 Vida002b
Pulse el botn amarillo para pasar de los canales favoritos
Pg. anterior
Pg. sig.
Favoritos
TV
a todos los canales y viceversa.
Mover
Watch
Salir
Los canales favoritos slo se muestran si se han configurado
previamente en el men Editar canales favoritos (consulte
la pgina 37).
Pulse los botones rojo o verde para mostrar las pginas
anterior o siguiente de la lista de canales.
Pulse los botones o para seleccionar el canal que se
desea sintonizar y, a continuacin, pulse el botn
ENTER/OK.
El nmero del canal, el nombre y un icono se muestran en la esquina superior izquierda
mientras se cambia el canal. El nmero del canal y el nombre se muestran si el canal es
alguno de todos los canales, y se muestra un icono si el canal es alguno de los favoritos.
Pulse los botones azul o CH LIST para salir de la lista de canales.
Visualizar
Gua completa
sig.
Favoritos
Salir
Contina
Espaol - 38
BN68-01743A_05Spa.indd
38
2008-8-13
11:53:32
Para ver informacin de los programas, pulse los botones /// para seleccionar un
programa y, a continuacin, pulse el botn INFO.
En la esquina superior derecha de la pantalla se muestra informacin como nmero del
canal, ttulo del programa, duracin, barra de estado y un breve resumen del programa.
Si el resumen es largo se muestra . Pulse el botn INFO para ver el resumen
completo.
Se muestran seis canales. Para desplazarse por los canales, vaya a un canal con los
botones o . Para ver pgina a pgina, use los
botones P
o .
Lista programada
2.2 Lista programada
Jueves 22 Apr
15:30 ~ 18:00 Una vez
2 BBC TWO
Animal Park
Si ha elaborado una lista de visualizacin planificada
Jueves 22 Apr 20:00 ~ 21:00 Una vez
de programas que desea ver, el canal se cambiar
2 BBC TWO
The Hairy Bikers
automticamente al programa planificado a la hora planificada
aunque est viendo otro programa.
Pulse el botn rojo para aadir un nuevo programa. El
Aadir programa
Editar
Borrar
men para aadir un programa se muestra con la opcin
Mover
Volver
Canal seleccionada.
Pulse los botones / y ENTER/OK para ajustar
Lista programada
el canal, la hora, la fecha y la frecuencia. Una vez
Canal
810 Super RTL
completada la programacin, guarde sta con el botn
Hora
10 : 15 to - - : - rojo.
Si desea editar una programacin, seleccinela con los
Thu 03 Mar 2005
Fecha
botones o y, a continuacin, pulse el botn verde. Si
Frecuencia
es necesario, seleccione el programa que desee suprimir
Guardar
Cancelar
con los botones o y, a continuacin, pulse el botn
Ajustar
Mover
Volver
azul.
Cuando se ve una televisin analgica, el canal DTV
reservado no se puede cambiar. El canal slo se
cambia automticamente al canal reservado mientras
se est viendo una televisin DTV.
La reserva de programas slo funciona cuando la
televisin est encendida, pero no en el modo de
suspensin. Para conocer los detalles sobre cmo
Gua
encender y apagar automticamente el televisor,
consulte la pgina 9.
Gua actual y prxima
Gua completa
Lista programada
Mover
Entrar
Volver
Gua
Gua actual y prxima
Gua completa
Lista programada
Gua predeterminada : GuaAct./sig.
completa
Gua completa
Mover
Entrar
Volver
Contina
Espaol - 39
BN68-01743A_05Spa.indd
39
2008-8-13
11:53:34
Gua
Gua actual y prxima
Gua completa
Lista programada
Mover
Entrar
Volver
Act.
sig.
Visualizar
Gua completa
Favoritos
Salir
Visualizar
Gua completa
Idioma
Este men incluye 4 submens:
Idioma de audio, Idioma de los subttulos, Idioma del
teletexto y Preferencias.
No
Favoritos
Salir
Idioma
Idioma de audio
Idioma de los subtdtulos
Idioma del teletexto
Preferencia
Mover
Entrar
Volver
Contina
Espaol - 40
BN68-01743A_05Spa.indd
40
2008-8-13
11:53:35
Idioma
3.2 Preferencias
Este men incluye 6 submens:
Idioma de audio
Idioma principal audio, Idioma secundario audio,
Idioma de los subtdtulos
Idioma principal de los subttulos, Idioma secundario
Idioma del teletexto
de los subttulos, Idioma principal del teletexto e Idioma
Preferencia
el botn ENTER/OK.
Mover
Entrar
Volver
Aparecen las opciones disponibles del men seleccionado.
Preferencia
Pulse los botones o para seleccionar una opcin
Contina
Espaol - 41
BN68-01743A_05Spa.indd
41
2008-8-13
11:53:36
4. Configuracin
Este men incluye 8 submens:
Transparencia de mens, Bloqueo paterno, Subttulos,
Modo de subttulo, Texto digital, Zona horaria, Formato
audio y Sistema.
4.1 Transparencia de mens
Puede definir la transparencia de los mens.
Pulse los botones o para seleccionar la opcin
deseada (Alto, Medio, Bajo u Opaco) y, a continuacin,
pulse el botnENTER/OK.
Configuracin
Transparencia de mens : Medio
Bloqueo paterno
Subttulos : Activado
Mover
Entrar
Volver
Configuracin
Transparencia de mens : Medio
Alto
Bloqueo paterno Medio
Bajo
Subttulos : Activado
Opaco
Modo de subttulo : Normal
Formato audio : PCM
Mover
Entrar
Volver
programas inadecuados.
Modo de subttulo : Normal
Contina
Espaol - 42
BN68-01743A_05Spa.indd
42
2008-8-13
11:53:37
Configuracin
4.3 Subttulos/Modo de subttulo/Formato audio/Texto digital
Se pueden usar los ajustes que coincidan con las preferencias
Transparencia de mens : Medio
principal.
Modo de subttulo : Normal
usuario reside.
Texto digital
Este men slo se habilita cuando se selecciona un pas
Zona horaria
Sistema
Mover
Entrar
Volver
Contina
Espaol - 43
BN68-01743A_05Spa.indd
43
2008-8-13
11:53:39
4.5 Sistema
Este men incluye 5 submens:
Informacin de producto, Informacin de seal,
Actualizacin del software, Interfaz comn y Restablecer.
Informacin de producto
Puede ver la informacin del producto. Para obtener
asistencia, pngase en contacto con un distribuidor de
Samsung autorizado.
Pulse el botn ENTER/OK con la opcin Informacin
de producto seleccionada. Se muestra la informacin
del producto.
Versin de software/Versin de firmware
Informacin de seal
Se puede obtener informacin acerca del estado de la seal.
Pulse el botn ENTER/OK con la opcin Informacin
de seal seleccionada. Se muestra la informacin
tcnica del estado de la seal.
Servicio/ID servicio/Multiplex/Red/Nivel error de
bit/Potencia de sea)
Actualizacin del software (Opcional)
Para mantener el producto actualizado con las nuevas
funciones de la televisin digital se envan peridicamente
actualizaciones de software como parte de una seal normal
de televisin. Automticamente se detectan estas seales
y se muestra una pantalla de actualizacin del software. Se
presenta la opcin de instalar la actualizacin.
Informacin del software
Pulse el botn ENTER/OK para ver la versin actual del
software. Para mostrar la informacin de la versin del
software, vuelva a pulsar el botn ENTER/OK.
Actualizacin manual
Pulse el botn ENTER/OK para buscar el nuevo
software en los canales actuales de emisin.
Actualizacin del modo de suspensin: Activado/
Desactivado
Pulse el botn ENTER/OK. Para continuar con la
actualizacin del software con el conmutador de
encendido principal activado, seleccione Activado
pulsando los botones o .
45 minutos despus de haber entrado en el modo de
suspensin, se inicia automticamente una actualizacin
manual. Dado que la alimentacin de la unidad
est activada internamente, la pantalla PDP puede
encenderse ligeramente. Este fenmeno puede durar un
hora mientras la actualizacin del software se completa.
Configuracin
Texto digital
Zona horaria
Sistema
Mover
Entrar
Volver
Sistema
Informacin de producto
Informacin de seal
Software superior
Interfaz comn
Restablecer
Mover
Entrar
Volver
Informacin de producto
Versin de software: T_BDXPDEU00_0710
Versin de firmware: T_STDEU7_102c
Volver
Informacin de seal
Servicio: ?
ID de servicio : 0000
Multiplex: ? (TSID 0000,ONID 0000)
Red: ? (ID 0000)
Nivel error de bit:
10
Intensidad de seal:
0
Volver
Software superior
Informacin del software
Actualizacin manual
Mover
Entrar
Volver
Contina
Espaol - 44
BN68-01743A_05Spa.indd
44
2008-8-13
11:53:40
Espaol - 45
BN68-01743A_05Spa.indd
45
2008-8-13
11:53:41
Qu es Anynet?
Anynet+ es un sistema de red de AV que proporciona a los usuarios una sencilla interfaz AV
mediante el control de los dispositivos de AV conectados a travs del men Anynet+ cuando se
han conectado dispositivos de AV de Samsung Electronics.
Cable HDMI
Cable HDMI
Cable HDMI
TV
Dispositivo Anynet+ 1
Cable HDMI
Cine en casa
Cable HDMI
Dispositivo Anynet+ 2
Cable HDMI
Dispositivo Anynet+ 3
Cable HDMI
Cable ptico
slo el cable ptico entre la toma [Digital Audio Out (Optical)] del televisor y la toma Digital
Conecte
Audio Input del receptor.
Conecte slo un receptor.
escuchar el sonido de 5.1 canales a travs de los altavoces del sistema cine en casa. De lo
Puede
contrario, slo podr escuchar sonido estreo de 2 canales. Debe conectar correctamente la toma Digital
Audio IN (Optical) del sistema de cine en casa y el televisor para escuchar el sonido del televisor a travs
del sistema de cine en casa. Sin embargo, no se puede escuchar el sonido del grabador BD que se enva
al sistema de cine en casa a travs del televisor en sonido de 5.1 canales ya que el televisor slo cuenta
con una salida de sonido estreo de 2 canales. Consulte el manual del sistema de cine en casa.
Puede conectar un dispositivo Anynet+ mediante el cable HDMI. Algunos cables HDMI pueden no admitir
las funciones Anynet+.
Anynet+ funciona cuando el dispositivo de AV que admite Anynet+ se encuentra en estado de espera o de
encendido.
Anynet+ admite hasta 8 dispositivos de AV en total.
Espaol - 46
BN68-01743A_05Spa.indd
46
2008-8-13
11:53:42
Configuracin de Anynet+
Parmetros para usar las funciones Anynet+.
Uso de la funcin Anynet+
1
2
3
P1
Ver la televisin
TV
Seleccionar dispositivo
Grabar
Men en el dispositivo
Funcionamiento disp.
Rcepteur : Des.
Configuracin
Mover
Salir
Entrar
Configuration
Anynet+ (HDMI-CEC)
: OffDesactivado
Desact. auto.
: OffActivado
Buscando conexiones
Mover
Entrar
Volver
Configuration
Pulse los botones o para seleccionar Desact. auto.; a
continuacin pulse el botn ENTER/OK.
Anynet+ (HDMI-CEC)
: Activado
Pulse los botones o para seleccionar Desactivado y, a
Desact. auto.
: Off
Desactivado
continuacin, el botn ENTER/OK.
Buscando conexiones
La funcin Desact. auto. se activa.
Activado
Si selecciona Desactivado se cancela la funcin de
apagado automtico.
Mover
Entrar
Volver
Pulse el botn EXIT para salir.
Para usar la funcin Anynet+, el valor Seleccionar dispositivo
del mando a distancia debe ajustarse en TV.
Si establece Desact. auto en Desactivado, los dispositivos externos conectados tambin se desactivan cuando se
apaga el televisor. Sin embargo, si el dispositivo est grabando es posible que no se apague.
Grabar
desee y pulse el botn ENTER/OK.
DVD2
Men en el dispositivo
Se cambia al dispositivo seleccionado.
Si no encuentra el dispositivo que desea, pulse los botones
Funcionamiento disp.
o para seleccionar Buscando conexiones y pulse el botn
Rcepteur : Des.
ENTER/OK.
Configuracin
BN68-01743A_05Spa.indd
47
2008-8-13
11:53:42
Men Anynet+
El men Anynet+ cambia segn el tipo y el estado de los dispositivos Anynet+ conectados al
televisor.
Men Anynet+
Ver la televisin
Seleccionar dispositivo
Grabar
Men en el dispositivo
Funcionamiento disp.
Receptor
Configuracin
Descripcin
Cambia de Anynet+ al modo de emisin de TV.
El televisor est conectado al dispositivo correspondiente.
Comienza una grabacin. (Este men slo funciona con
dispositivos que admiten grabacin).
Muestra el men del dispositivo conectado.
Ejemplo: Cuando hay un grabador de DVD conectado, aparece el
men de ttulos del grabador de DVD.
Muestra el men de control de reproduccin del dispositivo
conectado.
Ejemplo: Cuando hay un grabador de DVD conectado, aparece el
men de control de reproduccin del grabador de DVD.
La salida de sonido se efecta a travs del receptor.
Permite ajustar el entorno de uso de Anynet+.
Dispositivo Anynet+
Estado de funcionamiento
Despus de cambiar al
dispositivo, cuando el men de
ste aparece en la pantalla.
Despus de cambiar al
dispositivo, mientras se
reproduce un archivo
Botones disponibles
Botones numricos
////ENTER
Botones de colores
Botn EXIT
(Bsqueda atrs)
(Bsqueda adelante)
(Parar)
(Reproducir/Pausa)
Despus de cambiar al
dispositivo, mientras se ve un
programa de TV
Botones CH /
Dispositivo de audio
La funcin Anynet+ slo funciona cuando el mando a distancia est ajustado en TV.
El botn REC funciona slo cuando la grabacin es posible.
Los dispositivos Anynet+ no se pueden controlar con los botones del lateral del TV. Los dispositivos
Anynet+
slo se pueden controlar mediante el mando a distancia del televisor.
mando a distancia del televisor puede no funcionar en determinadas circunstancias. En ese caso,
Elvuelva
a seleccionar el dispositivo Anynet+.
En el modo Anynet+, los botones de colores puede que no funcionen correctamente.
El funcionamiento de , puede variar segn el dispositivo.
Grabacin
El grabador permite efectuar una grabacin de un programa de televisin.
Pulse el botn REC.
Comienza la grabacin. (Slo cuando est conectado el dispositivo de grabacin Anynet+ activado.)
El programa de TV actual se graba en el estado Ver TV. Si est viendo un vdeo desde otro
dispositivo, se graba el vdeo de ste.
Se puede grabar las transmisiones de la fuente seleccionando Grabar despus de pulsar el botn
Anynet+.
Antes de grabar, compruebe si la toma de antena est conectada correctamente al dispositivo de
grabacin. Para conectar la antena al dispositivo de grabacin, consulte el manual del usuario del
dispositivo.
Espaol - 48
BN68-01743A_05Spa.indd
48
2008-8-13
11:53:43
Ahora podr escuchar el sonido a travs del receptor.
Men en el dispositivo
3 Pulse el botn EXIT para salir.
Funcionamiento disp.
Cuando el receptor est establecido en Activado, es posible
Rcepteur : Act.
Deseo salir de
Anynet+.
En la pantalla
aparece el mensaje
Conectando a un
dispositivo Anynet+...
El dispositivo Anynet+
no funciona.
El dispositivo
conectado no se
muestra.
Solucin
Compruebe si el dispositivo es un dispositivo Anynet+. El sistema Anynet+ slo admite
dispositivos Anynet+.
Conecte slo un receptor.
Compruebe si el cable de alimentacin de Anynet+ est debidamente conectado.
Compruebe las conexiones de los cables de Video/Audio/HDMI del dispositivo Anynet+.
Compruebe si Anynet+ (HDMI-CEC) est establecido en Act. en el men de
configuracin de Anynet+.
Compruebe si el mando a distancia del televisor est en modo TV.
Compruebe si es un mando a distancia exclusivo para Anynet+.
Anynet+ no funciona en algunas situaciones (bsqueda de canales)
Cuando se conecta o se desconecta el cable HDMI se han de buscar de nuevo los
dispositivos o reiniciar el televisor.
Compruebe si la funcin Anynet+ del dispositivo Anynet+ est activada.
Compruebe si el dispositivo Anynet+ est debidamente conectado al TV y si la opcin
Anynet+ (HDMI-CEC)) del men Configuracin est establecida en Activado.
Pulse el botn TV del mando a distancia del televisor para cambiar a TV. A continuacin
pulse el botn Anynet+ para visualizar el men Anynet+ y seleccionar el men que desee.
Seleccione Ver TV en el men Anynet+.
Pulse el botn SOURCE del mando a distancia del televisor y seleccione un dispositivo
que no sea Anynet+.
Pulse CH, CH LIST, PRE-CH para cambiar al modo TV. (Tenga en cuenta que el botn
de canal slo funciona cuando no hay ningn dispositivo Anynet+ con sintonizador
incorporado conectado.)
El mando a distancia no se puede utilizar cuando se est configurando Anynet+ o
cambiando a un modo de visualizacin.
Utilice el mando a distancia cuando haya terminado la configuracin de Anynet+ o el
cambio al modo de visualizacin.
No se puede usar la funcin de reproduccin mientras se efecta una conexin Plug & Play.
El programa de
televisin no se puede
grabar.
El sonido del televisor
no sale a travs del
receptor.
BN68-01743A_05Spa.indd
49
2008-8-13
11:53:43
1 TV/DTV
Sale del teletexto (segn los modelos)
2
TV/DTV
Se utiliza para mostrar la pgina de ndice (contenido) en cualquier
momento durante la visualizacin de teletexto.
3
6
7
8
9
0
!
(activar teletexto/mezcla)
Se utiliza para activar el modo de teletexto tras seleccionar
el canal que proporciona el servicio. Pulse dos veces para
superponer el teletexto a la pantalla de emisin actual.
(tamao)
Se utiliza para mostrar caracteres de doble tamao en la parte
superior de la pantalla. Si desea mostrarlos tambin en la parte
inferior, vuelva a pulsar el botn.
Plselo de nuevo para volver a la presentacin normal.
(modo)
Se utiliza para seleccionar el modo de teletexto (LIST/FLOF).
Si lo pulsa en el modo LIST (lista), cambia al modo de guardar lista.
En dicho modo se puede guardar la pgina de teletexto en la lista
mediante el botn (almacenar)
.
(pgina secundaria)
Se utiliza para mostrar la pgina secundaria disponible.
(avanzar pgina)
Se utiliza para mostrar la siguiente pgina de teletexto.
(retroceder pgina)
Se utiliza para mostrar la pgina anterior de teletexto.
(cancelar)
Se utiliza para visualizar la emisin cuando se busca una pgina.
(mostrar)
Se usa para mostrar el texto oculto (respuestas a juegos, por ejemplo). Plselo de nuevo para volver
a la presentacin normal.
Botones de colores (rojo/verde/amarillo/azul)
Si emisora utiliza el sistema FASTEXT, los distintos temas cubiertos en una pgina de teletexto se
codificarn en color y podr seleccionarlos pulsando los botones de color. Pulse el correspondiente
al tema deseado. La pgina muestra otra informacin con cdigo de color que se puede seleccionar
de la misma forma.
Pulse el botn del color correspondiente para ver la pgina anterior o la siguiente.
(retener)
Se utiliza para retener la presentacin en una pgina determinada
si sta est enlazada con varias pginas secundarias que se
muestran automticamente. Para reanudar la presentacin vuelva
a pulsar el botn.
(almacenar)
Se utiliza para guardar las pginas del teletexto.
BN68-01743A_05Spa.indd
50
2008-8-13
11:53:45
Contenido
Nmero de pgina seleccionado.
Identidad del canal.
Nmero de pgina actual o indicaciones de la
bsqueda.
Fecha y hora.
Texto.
Informacin de estado.
Informacin FASTEXT.
D
E
F
1
2
Instale el montaje mural con un par de apriete de 15 kgf cm o menos. Tenga en cuenta que las piezas
se pueden daar si el par de apriete es diferente del especificado.
El juego de accesorios incluye soporte y anilla []para la instalacin de un televisor SAMSUNG en un
montaje mural de otra empresa. (Caso B)
Espaol - 51
BN68-01743A_05Spa.indd
51
2008-8-13
11:53:47
Familia de
producto
Televisor LCD
Televisor PDP
Pulgadas
Especificaciones
VESA (A * B)
Tornillo estndar
23 ~ 26
200 * 100
M4
32 ~ 40
200 * 200
M6
46 ~ 52
600 * 400
57
700 * 400
(No VESA)
57 ~ 70
800 * 400
80 ~
1400 * 800
42 ~ 50
600 * 400
55 ~ 70
800 * 400
63
No VESA
80 ~
1400 * 800
Cantidad
4
M8
4
M8
6
4
ofrecen las dimensiones estndar para los equipos de montaje mural, como se muestra en la
Se
tabla anterior.
adquirir el equipo de montaje mural, tambin se distribuye un manual de instalacin detallado y
Altodas
las piezas necesarias para el montaje.
use tornillos con un tamao superior al estndar, ya que pueden causar daos en el interior del
No
televisor.
montajes murales que no cumplen las especificaciones de tornillos estndar VESA, la longitud
Para
de stos puede variar dependiendo de las especificaciones.
No use tornillos que no cumplan las especificaciones de tornillos estndar VESA
No
apriete excesivamente los tornillos, ya que podra daar el producto o provocar la cada de
ste con riesgo de causar lesiones personales. Samsung no se hace responsable de este tipo de
accidentes.
Samsung no se hace responsable de daos o lesiones personales cuando se usa un montaje mural
que no es VESA o que no cumple las especificaciones, o si el cliente no sigue las instrucciones de
instalacin del producto.
Nuestros modelos de 57 y 63 no son compatibles con las especificaciones VESA. Por ello, debe
usar un equipo de montaje mural exclusivo para este modelo.
No se deben superar los 15 grados de inclinacin cuando se instala este televisor.
No instale el equipo de montaje mural mientras el televisor est encendido.
Se podra producir una descarga elctrica con riesgo de causar lesiones personales.
Espaol - 52
BN68-01743A_05Spa.indd
52
2008-8-13
11:53:47
Espaol - 53
BN68-01743A_05Spa.indd
53
Contina
2008-8-13
11:53:48
Contina
Espaol - 54
BN68-01743A_05Spa.indd
54
2008-8-13
11:53:50
REPRODUCTOR DE VDEO
Marca
SAMSUNG
ADMIRAL
AIWA
AKAI
AUDIO DYNAMICS
BELL&HOWELL
BROKSONIC
CANDLE
CANON
CITIZEN
COLORTYME
CRAIG
CURTIS MATHES
DAEWOO
DB
DIMENSIA
DYNATECH
ELECTROHOME
EMERSON
FISHER
FUNAI
GENERAL ELECTRIC
GO VIDEO
LG(Goldstar)
HARMAN KARDON
HITACHI
INSTANT REPLAY
JC PENNEY
JCL
KENWOOD
KLH
LIOYD
LOGIK
LXI
JVC
MAGNAVOX
MARANTZ
MARTA
KONIA
ORION
MEI
MEMOREX
MGA
MIDLAND
MINOLTA
Cdigo
000 001 002 003 004 005 077 078 079
020
025
004 027 032
007 026
018
022
002 003 006 008 015 055
021 056
002 003 006 008 015 055
007
002 024
002 007 008 017 021 025 056 064 066
003 010 011 012 013 014 015 016
007 026
017
025
034
001 003 006 021 022 025 030 032 034
040 047 050 052 060 063 065 066 067
069 073
018 024 028 029 048 051 061
025
002 005 017 021 056
002
006 007 008 009 010
007
019 025 041 042 074
021
002 007 018 019 021 026 037 041
054 056
007 008 018 021 026 037
007 008 018 026 037
070
025
038
025
081 082 083
021 056 059
007 008 018 021 026 037 062
006
036
073 074 075 076
021
006 021 024 025
034
005
019 041 075
Marca
MITSUBISHI
MONTGOMERY WARD
MTC
MULTITECH
NEC
OPTIMUS
PANASONIC
PENTAX
PENTEX RESEARCH+
PHILCO
PHILIPS
PIONEER
PORTLAND
PROSCAN
QUARTZ
QUASAR
RADIO SHACK/
REALISTIC
RCA
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHIMTOM
SIGNATURE
SONY
SYLVANIA
SYMPHONIC
TANDY
TASHIKA
TATUNG
TEAC
TECHNICS
TEKNIKA
TMK
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
YAMAHA
ZENITH
Cdigo
019 034 041 046
020
002 025
002 005 025 038
007 008 018 026 037 062 064
020
021 056 071 072
019 041 075
008
021 056 059
021 080
019 026 039 053
015 049 055
017
018
021 056
006 018 020 021 024 025 029 034
048 056
002 017 019 021 035 041 043 057
068 076
026
018 024
003 047 052 067
006 018 019 024 028 029 041 048 051
020 034 045 015
027 033 038 058
025
027 033 044
021 025 056 059
025
018 025
006
037
025 037 068
021
006 021 025 031
066
003 019 029 051 052
002 006
002
007 026
026
007 026
002
002 003 006 019 020 021 024 025 034
038 041
007 008 018 026 037
023 027 033
Contina
Espaol - 55
BN68-01743A_05Spa.indd
55
2008-8-13
11:53:50
DECODIFICADOR DE CABLE
Marca
SAMSUNG
GI
HAMLIN
HITACHI
JERROLD
MACOM
MAGNAVOX
OAK
PANASONIC
PHILIPS
PIONEER
RCA
REGAL
Cdigo
000 001 002 003 004 005 006 007
041
003 024 031
025 030
038 039
025 030
019 023 028
026
003 022 027 037 044
019 021 023 028
004 018 020 044
014 022 040
003
Marca
REGENCY
SA
SCIENTIFIC ATLAN
SPRUCER
STARGATE 2000
SYLVANIA
TEXSCAN
TOCOM
UNIVERSAL
VIEWSTAR
WARNER AMEX
ZENITH
Cdigo
015 023
042 043
042 043
022
036
016
016
032
033 034
019 021 023 028
046
017 029 035 037 045
DECODIFICADOR SAMSUNG
Producto
Ground wave STB
CABLE STB
Satellite STB
Cdigo
000 001 002 008 013
000 004 008 013
000 003 008 013
DECODIFICADOR
Marca
ALPHASTAR
ANAM
CHANNEL MASTER
CROSSDIGITAL
CHAPARRAL
DIRECT TV
DAEWOO
DISH NETWORK SYSTEM
DISHPRO
DRAKE
DX ANTENNA
ECHOSTAR
EXPRESSVU
GOI
GE
GENERAL INSTRUMENT
HTS
HOME CABLE
HITACHI
HUGHES NETWORK
IQ
IQ PRISM
JANEIL
JERROID
JVC
Cdigo
023
043
018 034
019
035
015 016 017 019 022 045 060
061 062 065 066 067 068
074
069 070
069
018 024 032
027
025 069 070 071
069
069
065
046 047 048 063 064
069
056
022
015 017
020
020
059
063
069 070
Marca
LG(Goldstar)
MAGNAVOX
MEMOREX
MOTOROLA
MACOM
MITSUBISHI
NEXT LEVEL
PHILIPS
PRIMESTAR
PANASONIC
PAYSAT
PROSCAN
RCA
RADIOSHACK
REALISTIC
STS
STAR TRAK
SKY
SKY LIFE
SHACK
STAR CHOICE
SONY
TOSHIBA
ULTIMATE TV
UNIDEN
ZENITH
Cdigo
044 073
016 021 036 038 039 040 041 042
016
064
018
015
047 048 064
015 016 017 021 033 036 038 039
040 041 042 067
046 049 050 063
058 059 061 062
016
065 066
051 052 053 065 066
064
057
020 027
026
031
005 006 007
064
064
054 060
015 017 028 029 030 072
060 066
016 021 037 055 056 057
024 031 068
Contina
Espaol - 56
BN68-01743A_05Spa.indd
56
2008-8-13
11:53:50
DVD DE SAMSUNG
Producto
DVD
DVDR
Grabador BD
Vdeo COMBO
Grabador de vdeo
DHR COMBO
Cdigo
000 001 002
003 004
005 006
007 008 009 010 011
012
013
Producto
COMBO vdeo y cine en casa
Grabador de unidad de disco duro COMBO
TWIN TRAY COMBO
Decodificador DVD COMBO
Receptor DVD
Receptor AV
Cdigo
014 015 016
017
018
019
020
021
DVD
Marca
ANAM
AUDIOVOX
AUDIOLOGIC
ANABA
APEX DIGITAL
AIWA
BROKSONIC
BLAUPUNKT
B&K
CURTIS MATHES
CYBER HOME
CLARION
CIRRUS
CINEVISION
DAEWOO
DENON
FARENHEIT
FISHER
GPX
GO VIDEO
GE
GREENHILL
HITACHI
HITEKER
HOYO
HARMAN / KARDON
IRT
INTEGRA
JBL
JVC
JATON
KENWOOD
KISS
KONKA
KLH
LG(Goldstar)
LOEWE
LASONIC
MOBILE AUTHORITY
MEMOREX
MALATA
MAGNAVOX
MINTEK
MONYKA
Cdigo
030
075
085
072
070 071 074 086 083 084 088
111 112
114
062
074
122 123
027
065 077 078 079 082
080 125
081
095
066
146
067 068
090
060
061 089 133 135
069 074
074
064 113
071
073
091 110
089
092
091
022 033 115 116
073
051 108 109
073
059 100 106 107
074 075
025 031
057
058
054
055
056
076 093
074 094
073
Marca
NORCENT
NEXT BASE
NEC
NANTAUS
NESA
OPTOMEDIA ELECTRONICS
OPTIVIEW
ONKYO
PHILCO
PRINCETON
PROSCAN
PANASONIC
PHILIPS
ROTEL
RIO
RCA
RAITE
ROWA
SAMPO
SONY
SHERWOOD
SVA
SYLVANIA
SHARP
SANSUI
SANYO
SHINSONIC
SANYO
THOMSON
TOSHIBA
TECHNICS
TVIEW
TOKAI
TEAC
TECHWOOD
TREDEX
URBAN CONCEPTS
VENTURER
VOCOPRO
YAMAHA
YAMAKAWA
XWAVE
ZENITH
Cdigo
048 049 050
052
053
144
074
105
072
076 092 119
044 045
046 047
023
024 034 124 134 136 137 138
036 076
117 118
120
023 035 074 075 131 132
073
038
104
026 029 126 127 128 129
130 141
039 041
042
043 093
140
062
062
094
090
145
028 062 076
139
072
073
096
097
098 099 101
076
075
102
032 063
040 073
103
076 121
Espaol - 57
BN68-01743A_05Spa.indd
57
2008-8-13
11:53:51
(segn el modelo)
Si va a instalar el televisor en la
pared, fije la tapa (1) en la zona
de conexin de la base del soporte
con los dos tornillos para ocultar la
ranura.
Solucin de problemas
Antes de ponerse en contacto con el Servicio posventa de Samsung, realice las comprobaciones
siguientes.
Si no puede resolver el problema con las instrucciones que aparecen a continuacin, anote el
modelo y el nmero de serie del televisor y pngase en contacto con el distribuidor local.
No hay imagen ni sonido
Compruebe que el cable de alimentacin est conectado a la red elctrica.
Compruebe que est pulsado el botn de encendido (apagar/encender) del panel frontal o pulse
el botn POWER del mando a distancia.
Compruebe los valores de contraste y brillo de la imagen.
Compruebe el volumen.
Compruebe que Silencio interno (Internal Mute) est establecido en Activado (ON).
Hay imagen pero no sonido
Compruebe el volumen.
Compruebe si ha pulsado el botn de volumen MUTE del mando a distancia.
No aparece ninguna imagen o est en blanco y negro
Ajuste los valores del color.
Compruebe que el sistema de emisin seleccionado sea correcto.
Hay interferencias en el sonido o en la imagen
Trate de identificar el aparato elctrico que afecta al televisor y aljelo.
Enchufe el televisor en una toma elctrica distinta.
La imagen est borrosa o presenta niebla y el sonido est distorsionado
Compruebe direccin, ubicacin y conexiones de la antena.
Con frecuencia, este tipo de interferencias se deben al uso de una antena interior.
El mando a distancia no funciona correctamente
Sustituya las pilas del mando a distancia.
Limpie el borde superior del mando a distancia (ventana de transmisin).
Compruebe que los polos + y - de las pilas estn correctamente colocados.
Compruebe si las pilas estn agotadas.
La pantalla est en blanco y el indicador de encendido parpadea constantemente
En el ordenador, compruebe los cables de seal y de alimentacin.
El televisor est usando su sistema de gestin de energa.
Mueva el ratn del ordenador o pulse una tecla.
En el equipo (STB, DVD, etc.) compruebe el cable de seal y el de alimentacin.
El televisor est usando su sistema de gestin de energa.
Pulse el botn Source del mando a distancia o del panel.
Encienda y apague el televisor.
La imagen daada aparece en la esquina de la pantalla.
Si Slo exploracin est seleccionado en algn dispositivo externo, la imagen daada puede aparecer
en la esquina de la pantalla. Este sntoma se origina en los dispositivos externos, no en el televisor.
Espaol - 58
BN68-01743A_05Spa.indd
58
2008-8-13
11:53:54
Especificaciones
Las descripciones y caractersticas de este folleto se facilitan con fines informativos solamente y
estn sujetas a modificacin sin previo aviso.
Nombre del modelo
PS42A417
42 pulgadas
Resolucin del PC
1024 x 768 a 60 Hz
Salida de sonido
10W X 2
Dimensiones (An x Al x P)
Cuerpo principal
1055 x 700 x 95 mm
1055 x 759 x 316 mm
Con soporte
Peso
Cuerpo principal
31 kg
34 kg
Con soporte
Consideraciones
medioambientales
Temperatura de funcionamiento
Humedad de funcionamiento
Temperatura de almacenamiento
Humedad en almacenamiento
10 C a 40 C (50 F a 104 F)
10% al 80%, sin condensacin
-20 C a 45 C (-4 F a 113 F)
5% al 95%, sin condensacin
Espaol - 59
BN68-01743A_05Spa.indd
59
2008-8-13
11:53:55
BN68-01743A_05Spa.indd
60
2008-8-13
11:53:55
Portugus -
BN68-01743A-05Por.indd
2008-8-13
11:50:25
ndice
Informaes gerais
Funes de tempo......................................... 24
Idioma / Ecr azul / Melodia / Efeito de luz /
Poupana energ. / Nv.pr.HDMI...................... 25
Utilizar o Modo Jogo...................................... 26
Ajuste do suporte de montagem na parede
(vendido em separado).................................. 27
Ver a imagem na imagem (PIP)..................... 28
Proteco de ecr.......................................... 29
Funcionamento
Ligar e desligar o televisor............................... 9
Ver os menus................................................. 10
Funo Plug & Play....................................... 10
Ver uma fonte de sinal externa...................... 12
Editar nomes de dispositivos......................... 13
Controlo de canais
Memorizar canais automaticamente.............. 13
Memorizar canais manualmente.................... 14
Adicionar/Bloquear canais............................. 15
Ordenar os canais memorizados................... 16
Atribuir nomes a canais................................. 16
Sintonizao fina da recepo de canais...... 17
LNA (Low Noise Amplifier)............................. 17
Visualizao do PC
Configurar o software do PC (com base no
Windows XP)................................................. 30
Modo de entrada (PC)................................... 31
Definir o PC.................................................... 32
Definir o PC Home Theater............................ 33
Sobre o Anynet+
Controlo de som
Anexo
Funes de som............................................ 22
Seleccionar o modo de som (consoante o
modelo).......................................................... 23
Smbolos
Carregue
Importante
Nota
Portugus
O que o Anynet+?....................................... 46
Ligar dispositivos Anynet+............................. 46
Configurar o Anynet+..................................... 47
Procurar e Alternar entre dispositivos
Anynet+.......................................................... 47
Gravar............................................................ 48
Ouvir atravs de um receptor........................ 49
Antes de solicitar assistncia tcnica,
verifique os seguintes pontos........................ 49
Controlo de imagem
Portugus -
BN68-01743A-05Por.indd
2008-8-13
11:50:25
Verificar acessrios
Manual do utilizador
Telecomando/
Pilhas AAA
Cabo de alimentao
Garantia/
Manual de segurana
(No est disponvel em
todos os locais)
Proteco inferior /
Parafusos (2 de cada)
(Consulte a pgina 58)
Ncleo de
ferrite para
cabo de
alimentao
Pano de limpeza
Ncleo de
ferrite para
S-Video
Vendidos separadamente
Cabo S-Video
Cabo de antena
Cabos de
componentes
Cabos de udio
Cabo de vdeo
Cabo de PC
Cabo Scart
Cabo HDMI
Cabo HDMI/DVI
Utilizar a base
deve ser transportado
Oporplasma
duas ou mais pessoas. Nunca
-20 ~ 20
Portugus -
BN68-01743A-05Por.indd
2008-8-13
13:39:51
Painel de controlo
Painel frontal (ou lateral)
(ENTER)
No menu no ecr, utilize este boto tal como
utiliza o boto ENTER no telecomando.
6 Boto (POWER)
Carregue para ligar/desligar o televisor.
Indicador de corrente
Pisca e apaga-se quando o televisor est
ligado; acende-se quando est no modo de
suspenso.
Sensor do telecomando
Aponte o telecomando para este ponto no
televisor.
7 Altifalante
C/P.
Carregue neste boto para mudar de canal.
No menu no ecr, utilize os botes
C/P.
tal como utiliza os botes
e do telecomando.
Portugus -
BN68-01743A-05Por.indd
2008-8-13
11:50:27
Painel de ligao
Painel lateral
1
2
ou
Painel posterior
1
ou
Rede de televiso
por cabo
8
ou
BN68-01743A-05Por.indd
Continua...
2008-8-13
11:50:29
1 POWER IN
Ligue o cabo de alimentao fornecido.
2 Ligar dispositivos de udio externos
Ligue sinais de udio RCA entre o televisor
e uma fonte externa como, por exemplo, um
equipamento de udio.
3 EXT 1, EXT 2
Entradas ou sadas para dispositivos externos,
tais como videogravadores, consolas de jogos
ou leitores de DVD.
Especificao de entradas/sadas
Conector
EXT 1
EXT 2
Entrada
Sada
Vdeo udio (L/R) RGB Vdeo + udio (L/R)
S est disponvel a
sada TV ou DTV.
Sada que pode
escolher.
4 COMPONENT IN
Entradas de udio (AUDIO L/R) e de vdeo
(Y/PB/PR) para Componente.
5 DIGITAL AUDIO OUT (OPTICAL)
Faa a ligao a um componente de udio
digital.
6 SERVICE
Conector para assistncia tcnica.
Ligue a tomada srie entre o
suporte motorizado de montagem na
parede e o televisor quando quiser ajustar o
ngulo de visualizao deste ltimo com o
telecomando.
7 PC IN / AUDIO
Ligue tomada de sada de udio e vdeo no
PC.
8 Ranhura COMMON INTERFACE
Introduza o CI (Common Interface) card na
ranhura. (consulte a pgina 45)
Se no introduzir o CI CARD em
determinados canais, Sinal codificado
aparece no ecr.
As informaes de associao incluindo um
nmero de telefone, ID do CI CARD, ID do
anfitrio e outras informaes aparecem
cerca de 2 a 3 minutos depois. Se aparecer
uma mensagem de erro, contacte o seu
fornecedor de servios.
Assim que terminar a configurao das
informaes sobre os canais, aparece
a mensagem Actualizao concluda
indicando que a lista de canais j est
actualizada.
Introduza o Carto-CI na direco
indicada
9 HDMI IN 1, HDMI IN 2
Ligue tomada HDMI de um dispositivo
com sada HDMI. Estas entradas tambm
podem ser utilizadas como uma ligao
DVI com entradas de udio analgico
separadas. preciso um cabo HDMI/DVI
opcional para fazer esta ligao. Quando
se utiliza o adaptador HDMI/DVI opcional,
as entradas de udio analgico DVI no
televisor permitem receber som dos canais
esquerdo e direito a partir do dispositivo
DVI. (No compatvel com PC)
Quando ligar este produto via HDMI ou DVI
a uma Set Top Box, leitor de DVD, consola
de jogos, etc., certifique-se de que o
produto est configurado para um modo de
sada de vdeo compatvel (como se indica
na tabela abaixo). A no observncia deste
procedimento pode provocar interferncias
na imagem ou ausncia de imagem.
No tente ligar o conector HDMI/DVI a um
PC ou placa grfica para porttil. (Se o fizer,
aparece um ecr em branco.)
DVI IN (HDMI 2) AUDIO L/R
Sadas de udio DVI para dispositivos
externos.
0 ANT IN
Conector coaxial de 75 para rede de
televiso por cabo/antena.
Modos suportados para HDMI e Componente
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Componente
Portugus -
BN68-01743A-05Por.indd
2008-8-13
11:50:29
Apresentao do telecomando
um telecomando exclusivo para invisuais e tem pontos em braile nos botes Power,
Este
Canal, Volume, STOP e PLAY/PAUSE.
O desempenho do telecomando pode ser afectado pela luz brilhante.
1 Boto POWER
(liga e desliga o televisor)
2 Botes numricos para
acesso directo aos canais
3 Seleco de canais de um/
dois dgitos
4 Boto de controlo de canais
(Consulte a pgina 15)
5 Selecciona directamente os
modos TV e DTV.
6
Aumento do volume
Diminuio do volume
7 Desligar o som
temporariamente
8 Mostra o menu principal no
ecr
9 Volta para o menu anterior
@ Seleco do tamanho de
imagem
# Visualizao do guia de
programao electrnico
(EPG)
$ Seleco do modo de som
% Configurao do
telecomando
^ Selecciona um dispositivo
de destino que ser
controlado pelo telecomando
da Samsung (TV, DVD, STB,
CABLE, VCR)
& Carregue neste boto para
retro-iluminar os botes
de VOL, de CH e de fonte
activa (TV, DVD, CABLE,
STB, VCR) no telecomando.
* Seleco de fontes
disponveis
( Canal anterior
) Visualizao do menu DTV
a Grava emisses em directo
b Funo do videogravador/
DVD (Rebobinar, Parar,
Reproduzir/Pausa, Avano
rpido)
c
Canal seguinte
Canal anterior
d Sair do menu no ecr
e Controlar o cursor no menu
Continua...
Portugus -
BN68-01743A-05Por.indd
2008-8-13
11:50:30
Portugus -
BN68-01743A-05Por.indd
2008-8-13
11:50:30
Ver os menus
1
2
3
4
5
TV
Imagem
Modo
: Dinmico
Contraste 100
Brilho 45
Nitidez 75
Cor
55
Matiz
Vr 50
Vm 50
Tonalidade
: Cores frias1
Definies detalhadas
Mais
Mover
Enter
Sada
Portugus - 10
BN68-01743A-05Por.indd
10
Mover
Enter
Saltar
Continua...
2008-8-13
11:50:31
7
8
10
11
12
13
14
Continua...
Portugus - 11
BN68-01743A-05Por.indd
11
2008-8-13
11:50:32
Data
Ano
01
15
2007
Hora
Minuto
12
00
Ajustar
Mover
Selecc
Saltar
Divirta-se!
OK
TV
Configurar
Plug & Play
Idioma
: Portugus
Tempo
Modo Jogo
: Deslig.
Ecr azul
: Deslig.
Melodia
: Deslig.
PC
PC Home Theater : Deslig.
Efeito de luz
: Deslig.
Mais
Mover
Enter
Voltar
TV
Entrada
Lista de fontes
: TV
Editar nome
Anynet+
TV
Mover
Enter
Voltar
Lista de fontes
TV
Ext.1
Ext.2
AV
S-Vdeo
Componente
PC
HDMI1
HDMI2
HDMI3
DTV
Mover
:
:
:
:
:
:
:
:
:
:
Enter
Voltar
Portugus - 12
BN68-01743A-05Por.indd
12
2008-8-13
11:50:33
Entrada
TV
Lista de fontes
: TV
Editar nome
Anynet+
Ext.1
Ext.2
AV
S-Vdeo
Componente
PC
HDMI1
HDMI2
HDMI3
Voltar
:
: VCR
: DVD
: D-VHS
:
STB Cabo
:
HD STB
:
Satlite STB
:
:
Mover
TV
Enter
Voltar
Canal
Blgica
Pas
: Blgica
Memor. auto.
Frana
Memor. manual Alemanha
Gestor canais
Italia
Ordenar
Holanda
Nome
Espanha
Sintonia fina
LNA
: Deslig.
Mover
TV
Enter
Voltar
Canal
Pas
: Blgica
Memor. auto.
Memor. manual
Gestor canais
Ordenar
Nome
Sintonia fina
LNA
: Deslig.
Enter
Editar nome
Mover
TV
Mover
Enter
Voltar
Memor. auto.
P 1
--
40 MHz
0 %
Iniciar
Enter
Voltar
Portugus - 13
BN68-01743A-05Por.indd
13
2008-8-13
11:50:34
TV
Canal
Pas
: Blgica
Memor. auto.
Memor. manual
Gestor canais
Ordenar
Nome
Sintonia fina
LNA
: Deslig.
TV
Mover
Enter
Voltar
Memor. manual
Programa
Sistema cores
Sistema som
Canal
Busca
Memorizar
: P 1
: Automtico
: BG
: C
4
: 63 MHz
: ?
Mover
Enter
Voltar
Programa (Nmero do programa a ser atribudo a um canal)
Carregue no boto ou at encontrar o nmero correcto.
Tambm pode seleccionar directamente o nmero do canal carregando nos botes
numricos (0 a 9).
Sistema cores: Automtico/PAL/SECAM/NTSC4.43
Carregue no boto ou para seleccionar o padro de cor pretendido.
Sistema som: BG/DK/I/L
Carregue no boto ou para seleccionar o padro de som pretendido.
Canal (Se souber o nmero do canal a memorizar)
Carregue no boto ou para seleccionar C (canal de antena) ou S (canal de cabo).
Carregue no boto e depois no boto ou para seleccionar o nmero pretendido.
Tambm pode seleccionar directamente o nmero do canal carregando nos botes numricos
(0 a 9).
Se no ouvir o som ou se o ouvir em ms condies, volte a seleccionar o padro de som
pretendido.
Busca (Se no souber os nmeros dos canais)
Carregue no boto ou para iniciar a procura.
O sintonizador procura o intervalo de frequncia at aparecer o primeiro canal ou o canal
seleccionado no ecr.
Memorizar (Quando memorizar o canal e o nmero do programa associado)
Defina para OK carregando no boto ENTER/OK.
Canal
Modo
P (Modo de programa): Quando terminar a sintonizao, j tero sido atribudos nmeros
de posio (P00 a P99) s estaes emissoras da sua rea. Pode seleccionar um canal,
introduzindo o nmero da posio neste modo.
C (Modo de canal de antena): Pode seleccionar um canal, introduzindo o nmero atribudo a
cada estao emissora neste modo.
S (Modo de canal de cabo): Pode seleccionar um canal, introduzindo o nmero atribudo a cada
estao de emisso por cabo neste modo.
Portugus - 14
BN68-01743A-05Por.indd
14
2008-8-13
11:50:34
Adicionar/Bloquear canais
No disponvel no modo DTV ou de entrada externa.
TV
facilmente.
1 Carregue no boto MENU para aceder ao menu.
2 Carregue no boto ou para seleccionar Canal e depois no
boto ENTER/OK.
3 Carregue no boto ou para seleccionar Gestor canais e
depois no boto ENTER/OK.
Adicionar canais
A Lista canais permite adicionar canais.
4
5
Canal
Pas
: Blgica
Memor. auto.
Memor. manual
Gestor canais
Ordenar
Nome
Sintonia fina
LNA
: Deslig.
Mover
TV
Enter
Voltar
Gestor canais
Lista canais
Bloqueio crianas : Deslig.
Bloquear canais
Esta funo permite evitar que utilizadores no autorizados como, por
exemplo, crianas, assistam a programas inadequados, cortando a
imagem e o som.
6
Mover
Enter
Voltar
Lista canais
P 1 C4
1 / 10
Prog.
0
1
2
3
4
5
6
7
8
9
C -C4
C 24
C2
C5
C 80
C7
C 36
C 52
C 11
Adicionar
Mover
Pgina
Bloquear
Enter
Voltar
Portugus - 15
BN68-01743A-05Por.indd
15
2008-8-13
11:50:35
canais memorizados.
Esta operao pode ser necessria depois de utilizar a
memorizao automtica.
1 Carregue no boto MENU para aceder ao menu.
2 Carregue no boto ou para seleccionar Canal e depois no
boto ENTER/OK.
3 Carregue no boto ou para seleccionar Ordenar e depois
no boto ENTER/OK.
4 Seleccione o canal que pretende mover carregando no boto
ou e depois carregue no boto ENTER/OK.
5 Seleccione o nmero do programa para o qual pretende mover
o canal, carregando no boto ou .
Carregue no boto ENTER/OK. O canal transferido para
a sua nova posio e todos os outros canais so mudados
respectivamente.
6 Repita os passos 4 a 5 at mover todos os canais para os
nmeros de programa pretendidos.
7 Carregue no boto EXIT para sair.
TV
Canal
Pas
: Blgica
Memor. auto.
Memor. manual
Gestor canais
Ordenar
Nome
Sintonia fina
LNA
: Deslig.
Mover
TV
Enter
Voltar
Ordenar
Prog.
0
1
2
3
4
Mover
TV
Canal Nome
C
C76
C5
C6
C7
Enter
Voltar
Canal
Pas
: Blgica
Memor. auto.
Memor. manual
Gestor canais
Ordenar
Nome
Sintonia fina
LNA
: Deslig.
Mover
TV
Enter
Voltar
Nome
Prog.
0
1
2
3
4
Mover
Canal
C
C76
C5
C6
C7
Enter
Nome
Voltar
Portugus - 16
BN68-01743A-05Por.indd
16
2008-8-13
11:50:35
TV
Canal
Pas
: Blgica
Memor. auto.
Memor. manual
Gestor canais
Ordenar
Nome
Sintonia fina
LNA
: Deslig.
Mover
Enter
Voltar
Sintonia fina
P 1
+3
Reiniciar
Ajustar
Salvar
Voltar
P 1*
Mono
Imagem
Som
SRS TS XT
:
: Dinmico
: Personalizar
: Deslig.
Pas
: Blgica
Memor. auto.
Ordenar
entrada.
Nome
Sintonia fina
Portugus - 17
BN68-01743A-05Por.indd
17
2008-8-13
11:50:36
TV
Imagem
Modo
: Dinmico
Contraste 100
Brilho 45
Nitidez 75
Cor
55
Matiz
Vr 50
Vm 50
Tonalidade
: Cores frias1
Definies detalhadas
Mais
Mover
TV
Enter
Voltar
Imagem
Dinmico
Modo
: Dinmico
Standard
Contraste
100
Filme
Brilho
45
Nitidez 75
Cor
55
Matiz
Vr 50
Vm 50
Tonalidade
: Cores frias1
Definies detalhadas
Mais
Mover
Enter
Voltar
TV
Imagem
Modo
: Dinmico
Contraste 100
Brilho 45
Nitidez 75
Cor
55
Matiz
Vr 50
Vm 50
Tonalidade
: Cores frias1
Definies detalhadas
Mais
TV
Mover
Enter
Voltar
Imagem
Modo
: Dinmico
Contraste 100
Brilho 45
Nitidez 75
Cor
55
Matiz
Vr 50 Cores frias2
Vm 50
Tonalidade
: Cores
Coresfrias1
frias1
Definies detalhadas Normal
Cores quentes1
Mais
Cores quentes2
Portugus - 18
BN68-01743A-05Por.indd
18
2008-8-13
11:50:36
TV
Imagem
Modo
: Filme
Contraste 80
Brilho 65
Nitidez 35
Cor
35
Matiz
Vr 50
Vm 50
Tonalidade
: Cores quentes2
Definies detalhadas
Mais
TV
Enter
Voltar
Definies detalhadas
Ajustar preto
: Deslig.
Contraste dinm. : Baixa
Gama
: 0
Equilbrio do branco
O meu cont.cores
Mover
Mover
Enter
Voltar
modo Standard.
Portugus - 19
BN68-01743A-05Por.indd
19
2008-8-13
11:50:37
NR Digital
: Automtico
2 Carregue no boto ENTER/OK para seleccionar Imagem.
Cor activa
: Lig.
Movie Plus
: Lig.
Cor activa
: Lig.
seleccionar o tamanho.
Movie Plus
: Lig.
Reiniciar
: OK
BN68-01743A-05Por.indd
20
2008-8-13
11:50:37
TV
Imagem
Carregue no boto MENU para aceder ao menu.
Mais
Carregue no boto ENTER/OK para seleccionar Imagem.
Tamanho
: Wide Automtico
Seleccione a opo pretendida carregando no boto ou e
Modo de ecr
: 16 : 9
NR Digital
: Automtico
depois carregue no boto ENTER/OK.
Cor activa
: Lig.
DNIe
: Deslig.
Opes disponveis: NR Digital, Cor activa, DNIe, Movie plus.
Movie Plus
: Lig.
Reiniciar
: OK
Portugus - 21
BN68-01743A-05Por.indd
21
2008-8-13
11:50:38
Funes de som
1
2
TV
Som
Carregue no boto MENU para aceder ao menu.
Modo
: Personalizar
Carregue no boto ou para seleccionar Som e depois no
Equalizador
boto ENTER/OK.
SRS TS XT
: Deslig.
Volume auto.
: Deslig.
Equalizador: Balance/100Hz/300Hz/1kHz/3kHz/10kHz
SRS TS XT
: Deslig.
Volume
auto.
: Deslig.
qualidade do som.
Seleo do Som : Principal
Reiniciar
Se alterar estas definies, o modo de som muda
automaticamente para Personalizar.
SRS TS XT: Deslig./Lig.
Mover
Enter
Voltar
TruSurround XT uma tecnologia patenteada da SRS que
permite reproduzir contedos 5.1 multi-canais apenas com duas
TV
Equalizador
colunas. A tecnologia TruSurround proporciona um excelente som
surround virtual, atravs de qualquer sistema de reproduo com
duas colunas, incluindo os altifalantes internos de televisores.
D
+
+
totalmente compatvel com todos os formatos multi-canais.
0
0
TruSurround XT, SRS e o smbolo
E
so marcas comerciais da SRS
Balance 100Hz 300Hz 1kHz 3kHz 10kHz
Labs, Inc. A tecnologia TruSurround XT
est incorporada sob licena da SRS
Mover
Ajustar
Voltar
Labs, Inc.
Volume auto.: Deslig./Lig.
Cada estao emissora tem condies de sinal especficas e, por isso, no fcil regular o volume
sempre que muda de canal. Esta funo permite regular automaticamente o volume do canal
pretendido, baixando o som quando o sinal de modulao alto ou aumentando o som quando o
sinal de modulao baixo.
Sil. interno: Deslig./Lig.
Se quiser ouvir som atravs de colunas separadas, cancele o amplificador interno.
Os botes +, - e MUTE no funcionam se o Sil. interno estiver definido para Lig..
Seleo do Som: Principal/Sub
Se a funo PIP estiver activada, pode ouvir o som da imagem secundria (PIP).
Principal: utiliza-se para ouvir o som da imagem principal.
Sub: utiliza-se para ouvir o som da imagem secundria.
Reiniciar
Se o Modo Jogo estiver definido para Lig., a funo Reiniciar do menu Som activada. Se
seleccionar a funo Reiniciar depois de definir o equalizador, repe as respectivas predefinies.
Portugus - 22
BN68-01743A-05Por.indd
22
2008-8-13
11:50:38
Indicao no ecr
Transmisso normal
(Som standard)
NICAM
Mono
(Normal)
NICAM Estreo
NICAM
Estreo
Mono
(Normal)
NICAM
Estreo
NICAM DUAL-I/II
A2
Estreo
NICAM
Dual-1
Transmisso normal
(Som standard)
Bilingue ou DUAL-I/II
Dual I
Estreo
Estreo
NICAM
Dual-2
Mono
(Normal)
as condies de recepo se deteriorarem, a audio ser mais fcil se definir o modo para
Se
Mono.
Se o sinal estreo for fraco e ocorrer uma mudana automtica, mude para Mono.
Se receber um sinal mono no modo AV, faa a ligao ao conector de entrada AUDIO-L no
painel (frontal ou lateral). Se o som mono s sair pelo altifalante esquerdo, carregue no boto
DUAL I-II.
Portugus - 23
BN68-01743A-05Por.indd
23
2008-8-13
11:50:39
Funes de tempo
1
2
TV
Configurar
Carregue no boto MENU para aceder ao menu.
Modo Jogo
: Deslig.
Melodia
: Deslig.
no boto ENTER/OK.
PC
Efeito de luz
: Deslig.
depois carregue no boto ENTER/OK.
Mais
Opes disponveis: Ajuste o Relgio, Temporizador,
Mover
Enter
Voltar
Temporizador 1, Temporizador 2, Temporizador 3.
TV
Tempo
5 Quando estiver satisfeito com a definio, carregue no boto
ENTER/OK.
Ajuste o Relgio : 00 : 00
Temporizador
: Deslig.
automaticamente
Desligar
Quando definir o temporizador para Ligar hora definida, o televisor desliga-se eventualmente se
no carregar em nenhum comando no perodo de 3 horas aps o temporizador ter ligado o televisor.
Esta funo s est disponvel no modo Ligar hora definida do temporizador e permite evitar
sobreaquecimentos, que podem ocorrer se o televisor permanecer ligado durante muito tempo.
Portugus - 24
BN68-01743A-05Por.indd
24
2008-8-13
11:50:39
TV
Configurar
Carregue no boto MENU para aceder ao menu.
Modo Jogo
: Deslig.
Melodia
: Deslig.
Opes disponveis: Idioma, Ecr azul, Melodia, Light Effect,
PC Home Theater : Deslig.
Efeito
de
luz
: Deslig.
Poupana energ., Nv.pr.HDMI
Mais
4 Quando estiver satisfeito com a definio, carregue no boto
Mover
Enter
Voltar
ENTER/OK.
TV
Configurar
5 Carregue no boto EXIT para sair.
Mais
Idioma
Ajuste montagem na parede
Nv.pr.HDMI
: Baixa
menus e as indicaes.
Proteco de ecr
Portugus - 25
BN68-01743A-05Por.indd
25
2008-8-13
11:50:40
Idioma
: Portugus
1 Carregue no boto MENU para aceder ao menu.
Tempo
Modo Jogo
: Deslig.
PC
Portugus - 26
BN68-01743A-05Por.indd
26
2008-8-13
11:50:40
Entrar no menu
1
2
3
TV
Configurar
Mais
Ajuste montagem na parede
Poupana energ. : Deslig.
Nv.pr.HDMI
: Baixa
PIP
Proteco de ecr
Voltar
Posio 1
Ajustar
Boto
Enter
Posio
Mover
1
INFO
Center
Sada
Operaes
Ajuste ngulo de montagem na
parede
Reiniciar
Portugus - 27
BN68-01743A-05Por.indd
27
2008-8-13
11:50:41
ligado.
Nv.pr.HDMI
: Baixa
PIP
: TV
Fonte
Opes disponveis: PIP (Lig./Deslig.), Fonte, Tamanho,
Tamanho
:
Posio, Programa
Posio
:
Programa
: P 1
Portugus - 28
BN68-01743A-05Por.indd
28
2008-8-13
11:50:41
Proteco de ecr
Este aparelho est equipado com tecnologia de preveno
contra queimadura de ecr, o que reduz a possibilidade de
ocorrncia deste efeito. Esta tecnologia permite regular o
movimento da imagem para cima/baixo (Linha vertical) e
lateralmente (Pt horizontal).
A definio Tempo permite
programar o tempo em minutos entre os movimentos da
imagem.
1 Carregue no boto MENU para aceder ao menu.
2 Carregue no boto ou para seleccionar Configurar e
depois no boto ENTER/OK.
3 Carregue no boto ou para seleccionar Proteco de
ecr e depois no boto ENTER/OK.
4 Seleccione a opo pretendida carregando no boto ou e
depois carregue no boto ENTER/OK.
Opes disponveis: Mudar pixels, Tudo branco, Padro do
sinal, Cinzento lateral
5 Quando estiver satisfeito com a definio, carregue no boto
ENTER/OK.
6 Carregue no boto EXIT para sair.
Mudar pixels: Esta funo permite mover de minuto a minuto
pixels no plasma, na horizontal ou na vertical, para minimizar a
imagem residual no ecr.
Defina Mudar pixels para Lig. carregando no boto ou
e depois carregue no boto ENTER/OK.
Seleccione a opo pretendida carregando no boto ou
e depois carregue no boto ENTER/OK.
Opes disponveis: Pt horizontal, Linha vertical, Tempo
Condio ideal para a mudana de pixels:
PC
Pt horizontal
Linha vertical
Tempo (minuto)
1
1
2 min
TV
Configurar
Mais
Ajuste montagem na parede
Poupana energ. : Deslig.
Nv.pr.HDMI
: Baixa
PIP
Proteco de ecr
TV
Mover
Enter
Voltar
Proteco de ecr
Mudar pixels
Tudo branco
Padro do sinal
Cinzento lateral : Escuro
Mover
TV
Enter
Voltar
Mudar pixels
Mudar pixels
Pt horizontal
Linha vertical
Tempo
Mover
: Lig.
: 2
: 2
: 2 min
Enter
Voltar
TV/Ext/AV/S-Vdeo/
Componente/HDMI/DTV
2
2
2 min
O valor de Mudar pixels pode variar consoante o tamanho do ecr (polegadas) e o modo.
Tudo branco: Esta funo permite remover as imagens residuais que aparecem no ecr, mudando a
cor dos pixels para branco. Utilize esta funo quando ainda houver imagens residuais ou smbolos
no ecr, especialmente depois da visualizao de uma imagem fixa no ecr durante muito tempo.
Padro do sinal: Esta funo permite remover as imagens residuais do ecr, movendo todos os
pixels no plasma de acordo com um padro. Utilize esta funo quando ainda houver imagens
residuais ou smbolos no ecr, especialmente depois da visualizao de uma imagem fixa no ecr
durante muito tempo.
Cinzento lateral: Quando vir televiso no formato 4:3, se regular o equilbrio do branco nas
extremidades esquerda e direita, pode evitar danos no ecr.
Escuro: Se definir o tamanho do ecr para 4:3, escurece os lados esquerdo e direito.
Claro: Se definir o tamanho do ecr para 4:3, aclara os lados esquerdo e direito.
Para remover as imagens residuais do ecr, utilize a funo Tudo branco ou Padro do sinal.
Embora ambas as funes removam imagens residuais do ecr, a funo Padro do sinal mais
eficaz.
A funo de remoo de imagens residuais demora muito tempo (cerca de 1 hora) a remover
eficazmente as imagens residuais do ecr. Se a imagem residual no melhorar aps a execuo
desta funo, volte a repetir este procedimento.
Para cancelar esta funo, carregue num boto qualquer do telecomando.
Portugus - 29
BN68-01743A-05Por.indd
29
2008-8-13
11:50:42
Portugus - 30
BN68-01743A-05Por.indd
30
2008-8-13
11:50:42
Sinal de
vdeo
640 x 480
Compatvel
com IBM
PC / AT
800 x 600
1024 x 768
Frequncia
vertical
(Hz)
70.086
70.087
59.940
70.000
72.809
75.000
60.317
70.000
72.188
75.000
60.004
70.069
72.000
75.029
Frequncia
horizontal
(kHz)
31.469
31.469
31.469
35.000
37.861
37.500
37.879
43.750
48.077
46.875
48.363
56.476
57.672
60.023
Polaridade
vertical
Polaridade
horizontal
PS42A417
N
P
N
N/P
N
N
P
N/P
P
P
N
N
N/P
P
P
N
N
N/P
N
N
P
N/P
P
P
N
N
N/P
P
Portugus - 31
BN68-01743A-05Por.indd
31
2008-8-13
11:50:42
Definir o PC
Seleccione o modo PC carregando no boto SOURCE.
1
2
TV
Configurar
Plug & Play
Idioma
: Portugus
Tempo
Modo Jogo
: Deslig.
Ecr azul
: Deslig.
Melodia
: Deslig.
PC
PC Home Theater : Deslig.
Efeito de luz
: Deslig.
Mais
Mover
Enter
TV
Voltar
PC
Bloq. imagem
Posio
Ajuste auto.
Repor imagem
Mover
TV
Enter
Voltar
Bloq. imagem
Grosso
Fino
Mover
TV
Enter
50
31
Voltar
Posio
Mover
Enter
Voltar
Portugus - 32
BN68-01743A-05Por.indd
32
2008-8-13
11:50:43
Idioma
: Portugus
Se definir a funo Home Theater PC para Lig., pode configurar
Tempo
Ecr azul
: Deslig.
PC
Portugus - 33
BN68-01743A-05Por.indd
33
2008-8-13
11:50:43
Guia
Guia act. e posterior
Guia completo
Lista planeada
Guia predef.
Mover
: Guia completo
Enter
Sada
Canal
Memor. auto.
Memor. manual
Lista canais
Mover
Enter
Sada
Configurar
Transparncia de menu : Mdio
Legenda : Lig.
Mover
Enter
Sada
Continua...
Portugus - 34
BN68-01743A-05Por.indd
34
2008-8-13
11:50:44
Idioma
Idioma de udio
Idioma das legendas
Idioma do teletexto
Preferncia
Idioma principal
Idioma secundrio
Idioma principal das legendas
Idioma secundrio das legendas
Idioma principal do teletexto
Idioma secundrio do teletexto
Idioma
Idioma de udio
Idioma das legendas
Idioma do teletexto/Idioma teletexto
Preferncia
Mover
Enter
Sada
Todos os canais
14:20 - 14:33
Contains video with AFD O; coded frame
is 16:9
Sada
Portugus - 35
BN68-01743A-05Por.indd
35
2008-8-13
11:50:45
Canal
Este menu composto por 4 submenus:
Memor. auto., Memor. manual, Editar canais favoritos e
Lista canais.
Carregue no boto ou para seleccionar Canal e
depois no boto ENTER/OK. Aparece o menu Canal.
Canal
Memor. auto.
Memor. manual
Lista canais
Mover
Enter
Sada
Canal
Memor. auto.
Memor. manual
Lista canais
Mover
Enter
Voltar
Memor. auto.
0%
Servios encontrad: 0
Canal: -
Iniciar
Voltar
canais.
Memor. manual
Canal
Editar canais favoritos
Portugus - 36
BN68-01743A-05Por.indd
36
2008-8-13
11:50:46
Canal
1.3 Editar canais favoritos
Pode editar os seus canais favoritos com os botes coloridos.
Memor. auto.
boto ENTER/OK.
Editar canais favoritos
2
Five
Selec. Todos: selecciona todos os canais
3
BBC THREE
actualmente visualizados.
4
abc1
5
QVC
Selec. Nenhum: desmarca todos os canais
seleccionados.
Selec. Todos
Selec. Nenhum
Pr-vis.
Pr-vis.: mostra o(s) canal(is) actualmente
Mover
Selecc
Voltar
seleccionado(s).
Editar canais favoritos
Se tiver concludo as definies dos canais favoritos.
Adicionar
1
BBC TWO
Continua...
Portugus - 37
BN68-01743A-05Por.indd
37
2008-8-13
11:50:47
Lista canais
1.4 Lista canais
T
odos os canais
Pode ver uma lista com todos os canais ou com os seus canais BBC TWO
1. Test Card M...
806 arte
40. BBC NEWS24
favoritos.
51. BBCi
2. BBC TWO
800 ARD-MHP-DATA
Carregue no boto ou para seleccionar Lista canais 3.4. Vida003b
801 ARD-OnLine-K..
Vida004b
802 BBC ONE
5. Vida005b
e depois no boto ENTER/OK.
803 MDR FERNSE..
6. Vida006b
804 NDR FERNSEH..
Para ver essa lista, basta carregar no boto CH LIST. 7. BBC THREE
30. CBBC Channel
805 Vida002b
Carregue no boto amarelo para alternar entre os seus
Pgina anterior
Pgina seg
Favoritos
TV
canais favoritos e todos os canais.
Mover
Ver
Sada
Os seus canais favoritos s aparecem se os tiver definido
previamente no menu Editar canais favoritos (consulte a
pgina 37).
Carregue no boto vermelho ou verde para aceder
pgina anterior ou seguinte da lista de canais.
Carregue no boto ou para seleccionar um canal a
sintonizar e depois no boto ENTER/OK.
O nmero e o nome do canal, bem como um cone, aparecem no canto superior esquerdo
quando mudar de canal. O nmero e o nome do canal aparecem no ecr se o canal fizer
parte de todos os canais e o cone aparece se o canal for um dos canais favoritos.
Carregue no boto azul ou CH LIST para sair da lista de canais.
Ver
Guia completo
Post.
Favoritos
Sada
Portugus - 38
BN68-01743A-05Por.indd
38
2008-8-13
11:50:47
Para ver informaes sobre programas, carregue no boto /// para seleccionar um
programa e depois no boto INFO.
No canto superior direito do ecr, aparecem informaes como o nmero do canal, o
ttulo do programa e o tempo de execuo, a barra de estado, bem como um breve
resumo do programa seleccionado. Se o resumo for extenso, aparece . Carregue no
boto INFO para ver o texto completo do resumo.
Aparecem seis canais. Para percorrer os canais, v para um canal com o boto ou
. Para ver pgina a pgina, utilize o boto P
ou .
2.2 Lista planeada
Lista planeada
Se criar uma lista de visualizao planeada de programas aos
Quinta-feira 22 Apr 15:30 ~ 18:00 Once
2 BBC TWO
Animal Park
quais pretende assistir, o televisor muda automaticamente para
Quinta-feira 22 Apr 20:00 ~ 21:00 Once
o canal do programa planeado hora planeada mesmo se
2 BBC TWO
The Hairy Bikers
estiver a ver outro programa.
Carregue no boto vermelho para adicionar um novo
programa. O menu para adicionar um programa aparece
Adic. Programa
Edio
Apagar
com a opo Canal seleccionada.
Mover
Voltar
Carregue nos botes / e ENTER/OK para definir o
canal, a hora, a data e a frequncia pretendidos. Quando
Lista planeada
estiver satisfeito com as definies, guarde o planeamento
Canal
810 Super RTL
ajustado carregando no boto vermelho.
Tempo
10 : 15 to - - : - Se quiser editar o programa planeado, seleccione-o
carregando no boto ou e depois carregue no boto
Thu 03 Mar 2005
Data
verde. Se necessrio, seleccione o programa que pretende
Frequncia
apagar carregando no boto ou e depois carregue no
Salvar
Cancelar
boto azul.
Ajustar
Mover
Voltar
Enquanto estiver a ver televiso analgica, no pode
mudar o canal DTV reservado. O canal s muda
automaticamente para o canal reservado se estiver a
ver DTV.
O planeamento de programas s funciona com o
televisor j ligado e no no modo de espera. Para
mais informaes sobre como ligar e desligar
automaticamente o televisor, consulte a pgina 9.
Guia
Guia act. e posterior
Guia completo
Lista planeada
Guia predef.
Mover
: Guia completo
Enter
Voltar
Guia
Guia act. e posterior
Guia completo
Lista planeada
Guia predef.
Mover
Act./Post.
: Guia
completo
Guia completo
Enter
Voltar
Continua...
Portugus - 39
BN68-01743A-05Por.indd
39
2008-8-13
11:50:49
Guia
Guia act. e posterior
Guia completo
Lista planeada
Guia predef.
Enter
Voltar
Act.
Mover
: Guia completo
Ver
Guia completo
Post.
Favoritos
Sada
Ver
Guia completo
3. Idioma
Este menu composto por 4 submenus:
Idioma de udio, Idioma das legendas, Idioma do teletexto
e Preferncia.
No
Favoritos
Sada
Idioma
Idioma de udio
Idioma das legendas
Idioma do teletexto/Idioma teletexto
Preferncia
Mover
Enter
Voltar
Continua...
Portugus - 40
BN68-01743A-05Por.indd
40
2008-8-13
11:50:50
Idioma
3.2 Preferncia
Este menu composto por 6 submenus:
Idioma de udio
Idioma principal, Idioma secundrio, Idioma principal
Idioma das legendas
das legendas, Idioma secundrio das legendas, Idioma
Idioma do teletexto/Idioma teletexto
principal do teletexto e Idioma secundrio do teletexto.
Preferncia
Continua...
Portugus - 41
BN68-01743A-05Por.indd
41
2008-8-13
11:50:50
4. Configurar
Este menu composto por 8 submenus:
Transparncia de menu, Bloqueio para crianas, Legenda,
Modo de legendas, Texto digital, Fuso horrio, Formato de
udio e Sistema.
4.1 Transparncia de menu
Pode definir a transparncia do menu no ecr.
Carregue no boto ou para seleccionar a opo
pretendida (Alta, Mdio, Baixa ou Opaco) e depois no
boto ENTER/OK.
Configurar
Transparncia de menu : Mdio
Legenda : Lig.
Mover
Enter
Voltar
Configurar
Transparncia de menu : Mdio
Alta
Bloqueio para crianas Mdio
Baixa
Legenda : Lig.
Opaco
Modo de legendas : Normal
Formato de udio : PCM
Mover
Enter
Voltar
Continua...
Portugus - 42
BN68-01743A-05Por.indd
42
2008-8-13
11:50:51
Configurar
4.3 Legenda / Modo de legendas / Formato de udio / Texto digital
Pode utilizar vrias definies de acordo com as suas
Transparncia de menu : Mdio
preferncias pessoais.
Bloqueio para crianas
Texto digital
Este menu s activado se seleccionar um pas
Fuso horrio
suportado pelo fuso horrio.
Sistema
Mover
Enter
Voltar
Continua...
Portugus - 43
BN68-01743A-05Por.indd
43
2008-8-13
11:50:53
4.5 Sistema
Este menu composto por 5 submenus:
Informaes sobre prod., Informaes sobre o sinal,
Actualizao do software,
Interface comum e Reiniciar.
Informaes sobre prod.
Pode ver informaes sobre o produto. Para solicitar
assistncia ou servios de reparao, contacte um
revendedor aprovado pela Samsung.
Carregue no boto ENTER/OK com a opo
Informaes sobre prod. seleccionada. Aparece o
menu Informaes sobre prod.
Verso de software / Verso de firmware
Informaes sobre o sinal
Pode obter informaes sobre o estado do sinal.
Carregue no boto ENTER/OK com a opo
Informaes sobre o sinal seleccionada. Aparecem as
informaes tcnicas relativas ao estado do sinal.
Disponvel / ID de servio / Multiplex / Rede / Nvel
de erro de bits / Intensidade do sinal
Actualizao do software (Option)
Para manter o produto actualizado com novas funes
da televiso digital, so periodicamente transmitidas
actualizaes de software como parte do sinal de televiso
normal. O televisor detecta automaticamente estes sinais e
mostra a faixa de actualizao do software. Tem a opo de
instalar ou no a actualizao.
Informao de software
Carregue no boto ENTER/OK para ver a verso actual
do software. Para ver a informao sobre a verso de
software, carregue novamente no boto ENTER/OK.
Actualizao manual
Carregue no boto ENTER/OK para procurar software
novo nos canais actualmente transmitidos.
Actualizao do modo de espera: Lig. / Deslig.
Carregue no boto ENTER/OK. Para continuar a
actualizar o software com o interruptor de corrente
principal ligado, seleccione Lig. carregando no boto
ou .
45 minutos depois de entrar no modo de espera, iniciase automaticamente uma actualizao manual. Dado
que o aparelho est ligado internamente, o ecr do
plasma pode ficar aceso durante algum tempo. Este
fenmeno pode persistir durante mais de 1 hora at a
actualizao do software ficar concluda.
Configurar
Texto digital
Fuso horrio
Sistema
Mover
Enter
Voltar
Sistema
Informaes sobre prod.
Actualizao do software
Interface comum
Reiniciar
Mover
Enter
Voltar
Voltar
Informaes sobre o sinal
Disponvel: ?
ID do servio: : 0000
Multiplex: ? (TSID 0000,ONID 0000)
Rede: ? (ID 0000)
Nvel de erro bits: 10
Potncia sinal:
0
Voltar
Actualizao do software
Informao de software
Actualizao manual
Mover
Enter
Voltar
Continua...
Portugus - 44
BN68-01743A-05Por.indd
44
2008-8-13
11:50:54
Portugus - 45
BN68-01743A-05Por.indd
45
2008-8-13
11:50:54
O que o Anynet+?
Anynet+ um sistema de rede AV que permite uma interface de utilizador AV fcil de utilizar,
controlando todos os dispositivos de AV ligados atravs do menu Anynet+, se tiver dispositivos
Samsung Electronics AV ligados.
Cabo HDMI
Cabo HDMI
Cabo HDMI
TV
Dispositivo Anynet+ 1
Cabo HDMI
Home Theater
Cabo HDMI
Dispositivo Anynet+ 2
Cabo HDMI
Dispositivo Anynet+ 3
Cabo HDMI
Cabo ptico
apenas o cabo ptico tomada [Digital Audio Out (Optical)] do televisor e tomada [Digital
Ligue
Audio Input] do receptor.
Ligue apenas um receptor.
ouvir som de 5.1 canais atravs dos altifalantes do home theater. Caso contrrio, s pode
Pode
ouvir som estreo de 2 canais. Ligue a Digital Audio IN (Optical) do home theater e o televisor
correctamente para ouvir o som do televisor atravs do home theater. Contudo, no pode ouvir som
do gravador BD que enviado para o home theater atravs do televisor em canais 5.1, porque o
televisor s emite som estro de 2 canais. Consulte o manual do home theater.
Pode ligar um dispositivo Anynet+ utilizando o cabo HDMI. Alguns cabos HDMI podem no suportar
funes Anynet+.
O Anynet+ funciona quando o dispositivo AV que suporta Anynet+ est no estado de suspenso
ou ligado.
Anynet+ untersttzt maximal 8 AV-Gerte.
Portugus - 46
BN68-01743A-05Por.indd
46
2008-8-13
11:50:55
Configurar o Anynet+
As seguintes definies so para utilizar as funes Anynet+.
Utilizar a funo Anynet+
1
2
3
P1
Ver TV
TV
Selec.dispositivo
Gravar
Menu no dispositivo
Func. do dispositivo
Receiver
: Deslig.
Configurar
Mover
Enter
Sada
Configurar
Anynet+ (HDMI-CEC)
: OffDeslig.
Desligar automat.
: OffLig.
Procurar ligaes
Mover
Enter
Voltar
DVDR2
Carregue no boto ou para seleccionar um determinado
DVD1
Gravar
ENTER/OK.
Mover
Enter
Aparece a mensagem A configurar a ligao Anynet+... Quando
Return
a procura de dispositivos estiver concluda, aparece uma lista
dos dispositivos ligados no menu Anynet+.
Configurar
A comutao para os dispositivos seleccionados pode demorar at 2
Anynet+ (HDMI-CEC)
: Lig.
BN68-01743A-05Por.indd
47
2008-8-13
11:50:55
Menu Anynet+
O menu Anynet+ muda, dependendo do tipo e do estado dos dispositivos Anynet+ ligados ao
televisor.
Menu Anynet+
Descrio
Ver TV
Selec.dispositivo
Gravar
Menu no dispositivo
Func. do dispositivo
Receiver
Configurar
Estado de funcionamento
Botes disponveis
Botes numricos
Botes ////ENTER
Botes coloridos
Boto EXIT
Boto CH /
Dispositivo de udio
Dispositivo Anynet+
Gravar
Pode gravar um programa televisivo utilizando um gravador.
Carregue no boto REC.
A gravao comea (s quando ligar o dispositivo Anynet+ que permite a gravao).
O programa de televiso actual gravado no estado Ver televiso. Se estiver a ver imagens atravs
de outro dispositivo, so essas imagens que so gravadas.
Tambm pode gravar os fluxos da fonte seleccionando Gravar depois de carregar no boto Anynet+.
Antes de gravar, verifique se a tomada da antena est correctamente ligada ao dispositivo de
gravao. Para informaes sobre como ligar a antena ao dispositivo de gravao, consulte o
manual do utilizador respectivo.
Portugus - 48
BN68-01743A-05Por.indd
48
2008-8-13
11:50:56
Selec.dispositivo
2 Carregue no boto ou para seleccionar Lig., depois carregue no
Gravar
boto ENTER/OK.
Menu no dispositivo
Agora pode ouvir o som atravs do receptor.
Func. do dispositivo
3 Carregue no boto EXIT para sair.
Receiver : Lig.
Soluo
O Anynet+ no
funciona.
Quero iniciar o
Anynet+.
Quero sair do
Anynet+.
A mensagem Ligao
a Anynet+ dispositivo
aparece no ecr.
O dispositivo
Anynet+ no
reproduz.
No pode utilizar a funo de jogos enquanto com a funo Plug & Play em curso.
No aparece o
dispositivo ligado.
No consegue gravar
o programa de
Televiso.
O som do televisor
no sai pelo receptor.
BN68-01743A-05Por.indd
49
2008-8-13
11:50:56
1 TV/DTV
Sair do ecr de teletexto (consoante o modelo)
2
(ndice)
Utiliza-se para ver a pgina de ndice (contedo) a qualquer
momento em que est a visualizar o teletexto.
3
6
7
8
9
0
!
BN68-01743A-05Por.indd
50
2008-8-13
11:50:57
Contedo
Nmero da pgina seleccionada.
Nome da estao emissora.
Nmero da pgina actual ou indicaes da
procura.
Data e hora.
Texto.
Informaes sobre o estado.
Informaes FASTEXT.
D
E
F
1
2
Instale a Montagem na Parede com um intervalo de torque de 15 kg/cm ou inferior. As peas podem
danificar-se se o torque no tiver o intervalo especificado.
O Kit de Acessrios inclui um Anel de Suporte [] para a instalao de uma Montagem na Parede de
outra empresa para o televisor Samsung. (Caso B)
Portugus - 51
BN68-01743A-05Por.indd
51
2008-8-13
11:50:58
Televisor LCD
Televisor plasma
Espec. VESA (A * B)
Parafuso normal
23 ~ 26
200 * 100
M4
32 ~ 40
200 * 200
M6
46 ~ 52
600 * 400
57
700 * 400
(No conforme VESA)
57 ~ 70
800 * 400
80 ~
1400 * 800
42 ~ 50
600 * 400
55 ~ 70
800 * 400
63
No conforme VESA
80 ~
1400 * 800
Quantidade
4
M8
4
M8
6
4
no se responsabiliza por danos nos produtos ou por ferimentos pessoais se for utilizado
AumSamsung
kit de montagem na parede no conforme VESA ou no especificado ou se o consumidor no
seguir as instrues de instalao do produto.
BN68-01743A-05Por.indd
52
2008-8-13
11:50:59
Configurar o telecomando
Depois de o configurar correctamente, o telecomando pode funcionar de cinco modos diferentes:
TV, VCR, cabo, DVD ou Set-Top Box. Se carregar no boto correspondente do telecomando, pode
alternar entre estes modos e controlar um equipamento sua escolha.
O telecomando pode no ser compatvel com todos os leitores de DVD, videogravadores, caixas de
televiso por cabo e Set-Top Boxes.
Configurar o telecomando para controlar o videogravador
1 Desligue o videogravador.
2 Carregue no boto VCR no telecomando do televisor.
3 Carregue no boto SET no telecomando do televisor.
4 Com os botes numricos do telecomando, introduza os trs
dgitos do cdigo do videogravador indicado na pgina 55 deste
manual correspondente marca do seu videogravador. Introduza
os trs dgitos do cdigo mesmo que o primeiro seja um 0. (Se
houver mais do que um cdigo, experimente o primeiro.)
5 Carregue no boto POWER do telecomando. Se tiver configurado
correctamente o telecomando, o videogravador deve ligar-se.
Continua...
Portugus - 53
BN68-01743A-05Por.indd
53
2008-8-13
11:50:59
Continua...
Portugus - 54
BN68-01743A-05Por.indd
54
2008-8-13
11:51:00
Cdigos do telecomando
Videogravador
Marca
SAMSUNG
ADMIRAL
AIWA
AKAI
AUDIO DYNAMICS
BELL&HOWELL
BROKSONIC
CANDLE
CANON
CITIZEN
COLORTYME
CRAIG
CURTIS MATHES
DAEWOO
DB
DIMENSIA
DYNATECH
ELECTROHOME
EMERSON
FISHER
FUNAI
GENERAL ELECTRIC
GO VIDEO
LG(Goldstar)
HARMAN KARDON
HITACHI
INSTANT REPLAY
JC PENNEY
JCL
KENWOOD
KLH
LIOYD
LOGIK
LXI
JVC
MAGNAVOX
MARANTZ
MARTA
KONIA
ORION
MEI
MEMOREX
MGA
MIDLAND
MINOLTA
Cdigo
000 001 002 003 004 005 077 078 079
020
025
004 027 032
007 026
018
022
002 003 006 008 015 055
021 056
002 003 006 008 015 055
007
002 024
002 007 008 017 021 025 056 064 066
003 010 011 012 013 014 015 016
007 026
017
025
034
001 003 006 021 022 025 030 032 034
040 047 050 052 060 063 065 066 067
069 073
018 024 028 029 048 051 061
025
002 005 017 021 056
002
006 007 008 009 010
007
019 025 041 042 074
021
002 007 018 019 021 026 037 041
054 056
007 008 018 021 026 037
007 008 018 026 037
070
025
038
025
081 082 083
021 056 059
007 008 018 021 026 037 062
006
036
073 074 075 076
021
006 021 024 025
034
005
019 041 075
Marca
MITSUBISHI
MONTGOMERY WARD
MTC
MULTITECH
NEC
OPTIMUS
PANASONIC
PENTAX
PENTEX RESEARCH+
PHILCO
PHILIPS
PIONEER
PORTLAND
PROSCAN
QUARTZ
QUASAR
RADIO SHACK/
REALISTIC
RCA
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHIMTOM
SIGNATURE
SONY
SYLVANIA
SYMPHONIC
TANDY
TASHIKA
TATUNG
TEAC
TECHNICS
TEKNIKA
TMK
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
YAMAHA
ZENITH
Cdigo
019 034 041 046
020
002 025
002 005 025 038
007 008 018 026 037 062 064
020
021 056 071 072
019 041 075
008
021 056 059
021 080
019 026 039 053
015 049 055
017
018
021 056
006 018 020 021 024 025 029 034
048 056
002 017 019 021 035 041 043 057
068 076
026
018 024
003 047 052 067
006 018 019 024 028 029 041 048 051
020 034 045 015
027 033 038 058
025
027 033 044
021 025 056 059
025
018 025
006
037
025 037 068
021
006 021 025 031
066
003 019 029 051 052
002 006
002
007 026
026
007 026
002
002 003 006 019 020 021 024 025 034
038 041
007 008 018 026 037
023 027 033
Continua...
Portugus - 55
BN68-01743A-05Por.indd
55
2008-8-13
11:51:01
Cdigo
000 001 002 003 004 005 006 007
041
003 024 031
025 030
038 039
025 030
019 023 028
026
003 022 027 037 044
019 021 023 028
004 018 020 044
014 022 040
003
Marca
REGENCY
SA
SCIENTIFIC ATLAN
SPRUCER
STARGATE 2000
SYLVANIA
TEXSCAN
TOCOM
UNIVERSAL
VIEWSTAR
WARNER AMEX
ZENITH
Cdigo
015 023
042 043
042 043
022
036
016
016
032
033 034
019 021 023 028
046
017 029 035 037 045
Cdigo
000 001 002 008 013
000 004 008 013
000 003 008 013
SET-TOP BOX
Marca
ALPHASTAR
ANAM
CHANNEL MASTER
CROSSDIGITAL
CHAPARRAL
DIRECT TV
DAEWOO
DISH NETWORK SYSTEM
DISHPRO
DRAKE
DX ANTENNA
ECHOSTAR
EXPRESSVU
GOI
GE
GENERAL INSTRUMENT
HTS
HOME CABLE
HITACHI
HUGHES NETWORK
IQ
IQ PRISM
JANEIL
JERROID
JVC
Cdigo
023
043
018 034
019
035
015 016 017 019 022 045 060
061 062 065 066 067 068
074
069 070
069
018 024 032
027
025 069 070 071
069
069
065
046 047 048 063 064
069
056
022
015 017
020
020
059
063
069 070
Marca
LG(Goldstar)
MAGNAVOX
MEMOREX
MOTOROLA
MACOM
MITSUBISHI
NEXT LEVEL
PHILIPS
PRIMESTAR
PANASONIC
PAYSAT
PROSCAN
RCA
RADIOSHACK
REALISTIC
STS
STAR TRAK
SKY
SKY LIFE
SHACK
STAR CHOICE
SONY
TOSHIBA
ULTIMATE TV
UNIDEN
ZENITH
Cdigo
044 073
016 021 036 038 039 040 041 042
016
064
018
015
047 048 064
015 016 017 021 033 036 038 039
040 041 042 067
046 049 050 063
058 059 061 062
016
065 066
051 052 053 065 066
064
057
020 027
026
031
005 006 007
064
064
054 060
015 017 028 029 030 072
060 066
016 021 037 055 056 057
024 031 068
Continua...
Portugus - 56
BN68-01743A-05Por.indd
56
2008-8-13
11:51:01
DVD SAMSUNG
Produto
DVD
DVDR
BD Record
VCR COMBO
VCR Record
DHR COMBO
Cdigo
000 001 002
003 004
005 006
007 008 009 010 011
012
013
Produto
Home Theater VCR COMBO
HDD Record COMBO
TWIN TRAY COMBO
STB DVD COMBO
Receptor DVD
Receptor AV
Cdigo
014 015 016
017
018
019
020
021
DVD
Marca
ANAM
AUDIOVOX
AUDIOLOGIC
ANABA
APEX DIGITAL
AIWA
BROKSONIC
BLAUPUNKT
B&K
CURTIS MATHES
CYBER HOME
CLARION
CIRRUS
CINEVISION
DAEWOO
DENON
FARENHEIT
FISHER
GPX
GO VIDEO
GE
GREENHILL
HITACHI
HITEKER
HOYO
HARMAN / KARDON
IRT
INTEGRA
JBL
JVC
JATON
KENWOOD
KISS
KONKA
KLH
LG(Goldstar)
LOEWE
LASONIC
MOBILE AUTHORITY
MEMOREX
MALATA
MAGNAVOX
MINTEK
MONYKA
Cdigo
030
075
085
072
070 071 074 086 083 084 088
111 112
114
062
074
122 123
027
065 077 078 079 082
080 125
081
095
066
146
067 068
090
060
061 089 133 135
069 074
074
064 113
071
073
091 110
089
092
091
022 033 115 116
073
051 108 109
073
059 100 106 107
074 075
025 031
057
058
054
055
056
076 093
074 094
073
Marca
NORCENT
NEXT BASE
NEC
NANTAUS
NESA
OPTOMEDIA ELECTRONICS
OPTIVIEW
ONKYO
PHILCO
PRINCETON
PROSCAN
PANASONIC
PHILIPS
ROTEL
RIO
RCA
RAITE
ROWA
SAMPO
SONY
SHERWOOD
SVA
SYLVANIA
SHARP
SANSUI
SANYO
SHINSONIC
SANYO
THOMSON
TOSHIBA
TECHNICS
TVIEW
TOKAI
TEAC
TECHWOOD
TREDEX
URBAN CONCEPTS
VENTURER
VOCOPRO
YAMAHA
YAMAKAWA
XWAVE
ZENITH
Cdigo
048 049 050
052
053
144
074
105
072
076 092 119
044 045
046 047
023
024 034 124 134 136 137 138
036 076
117 118
120
023 035 074 075 131 132
073
038
104
026 029 126 127 128 129
130 141
039 041
042
043 093
140
062
062
094
090
145
028 062 076
139
072
073
096
097
098 099 101
076
075
102
032 063
040 073
103
076 121
Portugus - 57
BN68-01743A-05Por.indd
57
2008-8-13
11:51:01
Resoluo de problemas
Antes de contactar a assistncia ps-venda da Samsung, faa as simples verificaes indicadas
abaixo. Se no conseguir resolver o problema com as instrues abaixo, anote o modelo bem
como o nmero de srie do televisor e contacte o revendedor local.
No h som nem imagem
Verifique se o cabo de alimentao est ligado a uma tomada de parede.
Verifique se carregou no boto (POWER) (Ligar/Desligar) existente no painel frontal ou no boto
POWER do telecomando.
Verifique as definies de contraste e brilho da imagem.
Verifique o volume.
Verifique se o Sil. Interno est definido para Lig..
A imagem est normal mas no se ouve o som
Verifique o volume.
Verifique se carregou ou no no boto MUTE do telecomando.
No h imagem ou a imagem est a preto e branco
Regule as definies de cor.
Verifique se o sistema de transmisso seleccionado est correcto.
Interferncias no som e na imagem
Tente identificar o aparelho elctrico que est a provocar interferncias no televisor e afaste-o.
Ligue o televisor a uma tomada diferente.
A imagem est esbatida ou tem chuva, o som tem distores
Verifique a direco, a localizao e as ligaes da antena.
Estas interferncias ocorrem normalmente devido utilizao de uma antena interna.
O telecomando no funciona
Substitua as pilhas do telecomando.
Limpe a parte superior do telecomando (janela de transmisso).
Verifique se os terminais + e das pilhas esto correctamente posicionados.
Verifique se as pilhas esto gastas.
O ecr est preto e o indicador luminoso de corrente est a piscar
No computador, verifique: corrente, cabo de sinal.
O televisor est a utilizar o sistema de gesto de energia.
Mova o rato do computador ou carregue numa tecla do teclado.
No equipamento (STB, DVD, etc), verifique: corrente, cabo de sinal.
O televisor est a utilizar o sistema de gesto de energia.
Carregue no boto Source no painel ou no telecomando.
Desligue e volte a ligar o televisor.
A imagem danificada aparece no canto do ecr.
Se Digitalizao prec. estiver seleccionado em algum dispositivo externo, a imagem danificada
pode aparecer no canto do ecr. O sintoma causado por dispositivos externos, no pelo televisor.
Portugus - 58
BN68-01743A-05Por.indd
58
2008-8-13
11:51:03
Caractersticas tcnicas
As descries e caractersticas includas neste folheto destinam-se apenas a fins informativos e
esto sujeitas a alteraes sem aviso prvio.
Nome do modelo
PS42A417
42 polegadas
Resoluo de PC
1024 x 768 @ 60 Hz
Som (Sada)
10 W x 2
Dimenses (LxAxP)
Televisor apenas
1055 x 700 x 95 mm
Com base
Peso
Televisor apenas
31 kg
Com base
34 kg
Caractersticas ambientais
Temperatura de funcionamento
Humidade de funcionamento
Temperatura de armazenamento
Humidade de armazenamento
10 C a 40 C
10% a 80%, sem condensao
-20 C a 45 C
5% a 95%, sem condensao
Portugus - 59
BN68-01743A-05Por.indd
59
2008-8-13
11:51:04
BN68-01743A-05Por.indd
60
2008-8-13
11:51:04
Navodila za uporabnike
Zadrevanje slike na zaslonu
Na plazma televizorju ne prikazujte dolgo mirujoe slike (kot je video igra ali zaslon pri prikljuitvi
raunalnika), saj lahko to povzroi zadrevanje slike na zaslonu. Tako zadrevanje slike se imenuje
tudi oig zaslona. Da bi se izognili takemu zadrevanju slike, pri prikazovanju mirujoe slike
zmanjajte stopnjo svetlosti in kontrasta zaslona.
Viina
Zaslon PDP lahko normalno deluje na nadmorski viini pod 2000 m. Ne uporabljajte ga na
nadmorskih viinah nad 2000 m, ker lahko pride do motenj v delovanju.
Segrevanje zgornjega dela PDP-TV
Zgornji del izdelka se lahko pri dolgotrajni uporabi zelo segreje, ker se toplota iz izdelka odvaja skozi
odprtino v zgornjem delu. To je obiajno in ni posledica okvare ali napake na izdelku. Vseeno pa
morate otrokom prepreiti dotikanje zgornjega dela izdelka.
Izdelek prasketa
Televizor se pri prilagajanju okolju (na primer temperaturi in vlanosti zraka) lahko razirja ali kri in
ob tem prasketa. To je obiajno in ni posledica napake na izdelku.
Pokodovane pike
Na zaslonu PDP je od 1.230.000 (standardna slika) do 3.150.000 (HD-slika) pik, ki so izdelane z
zelo napredno tehnologijo. Kljub temu je lahko na zaslonu nekaj svetlih ali temnih slikovnih pik. Te
svetlobne pike ne bodo vplivale na delovanje izdelka.
Televizorja ne uporabljajte pri temperaturah pod 5 C(41F)
e je na PDP-zaslonu predolgo prikazana mirujoa slika, ga to lahko trajno pokoduje.
Dolgotrajno gledanje PDP-TV v formatu slike 4:3 lahko povzroi sledi okvirja
take slike na levi in desni strani ter na sredini zaslona. To se zgodi zaradi razlike
v oddajanju svetlobe na razlinih delih zaslona. Predvajanje DVD-ja ali uporaba
igralne konzole lahko povzroi podobne uinke. Garancija ne vkljuuje pokodb,
ki so nastale na tak nain.
Zakasnela slika na zaslonu.
e je na zaslonu dolgo asa prikazana mirujoa raunalnika slika ali slika iz video iger, lahko to
povzroi delni prikaz zakasnele slike na zaslonu. Ta uinek prepreite tako, da pri prikazu mirujoih
slih zmanjate svetlost in kontrast.
Garancija
- Garancija ne vkljuuje kode, ki jo povzroi zadrevanje slike na zaslonu.
- Garancija ne vkljuuje pokodb zaradi vgane slike.
Namestitev
Pri namestitvi izdelka v okolju z veliko prahu, visoko ali nizko temperaturo, visoko vlanostjo,
keminimi snovmi ali v okoljih, kjer neprestano deluje (na primer letalie, eleznika postaja), se
obrnite na pooblaeni servisni center. e tega ne storite, lahko pride do resne pokodbe naprave.
Vse funkcije, ki so povezane z digitalnim televizijskim signalom (DVB), delujejo samo v dravah z
digitalnim signalom DVB-T (MPEG2). Pri lokalnem trgovcu preverite, ali imate dostop do signala
DVB-T. eprav televizor ustreza specifikaciji DVB-T, ne moremo zagotoviti zdruljivosti z naslednjimi
generacijami tega standarda. Nekatere funkcije morda nebodo na voljo v vseh dravah.
Slovenina -
BN68-01743A-00Sln.indd
2008-8-13
11:12:33
Vsebina
Splone informacije
Navodila za uporabnike................................... 2
Pregled delov................................................... 4
Uporaba stojala................................................ 4
Nadzorna ploa.............................................. 5
Prikljuitvena ploa........................................ 6
Predstavitev daljinskega upravljalnika ............ 8
Delovanje
Vklop in izklop televizorja................................. 9
Ogled menijev................................................ 10
Funkcija Plug & Play...................................... 10
Gledanje zunanjega signalnega vira.............. 12
Urejanje imen naprav..................................... 13
Upravljanje kanalov
Samodejno shranjevanje kanalov.................. 13
Rono shranjevanje kanalov.......................... 14
Dodajanje/zaklepanje kanalov....................... 15
Razvranje shranjenih kanalov.................... 16
Poimenovanje kanalov................................... 16
Fina naravnava kanalov................................. 17
LNA (ojaevalnik ibkega kanala).................. 17
Upravljanje slike
Sprememba slikovnega standarda................ 18
Prilagajanje slikovnih nastavitev.................... 18
Konfiguracija podrobnih nastavitev slike........ 19
Izbira velikosti slike........................................ 20
Izbira zaslonskega naina.............................. 20
Digital NR / Active Colour / DNIe /
Movie Plus..................................................... 21
Zamrznitev trenutne slike............................... 21
Nadzor zvoka
Zvone funkcije.............................................. 22
Izbira zvonega naina (odvisno od modela)... 23
Opis funkcij
Raunalniki zaslon
Nastavitev programske opreme na
raunalnik (Windows XP)............................... 30
Nain vhoda PC............................................. 31
Nastavitev raunalnika................................... 32
Nastavitev raunalnika za domai kino.......... 33
Sistem Anynet+
Kaj je Anynet+?.............................................. 46
Prikljuitev naprav v sistem Anynet+............. 46
Nastavitev sistema Anynet+........................... 47
Iskanje naprav v sistemu Anynet+ in
preklapljanje med njimi.................................. 47
Snemanje....................................................... 48
Posluanje prek sprejemnika......................... 49
Kontrolni seznam, ki ga preglejte, preden se
obrnete na servis........................................... 49
Dodatek
Funkcija teleteksta (odvisno od modela)........ 50
Priprava na namestitev opreme za
pritrditev na steno.......................................... 51
Specifikacije kompleta za pritrditev na steno
(VESA)........................................................... 52
Nastavitev daljinskega upravljalnika.............. 53
Navodila za sestavljanj stojala (odvisno od
modela).......................................................... 58
Odpravljanje teav......................................... 58
Specifikacije................................................... 59
asovne funkcije............................................ 24
Language/Blue Screen/Melody/Light Effect/
Energy Saving/HDMI Black Level.................. 25
Pritisnite
Pomembno
Opomba
Slovenina
Simboli
Slovenina -
BN68-01743A-00Sln.indd
2008-8-13
11:12:33
Pregled delov
Uporabnika navodila
Daljinski upravljalnik/
baterije AAA
Napajalni kabel
Garancijska kartica/
varnostni prironik
(Ni na voljo povsod)
Feritni obro za
napajalni kabel
Feritni obro za
slualke S-Video
istilna krpica
Feritni obro
za kabel za
slualke
Naprodaj posebej
Kabel S-Video
Antenski kabel
Komponentni kabel
Avdio kabli
Video kabel
Kabel PC
Kabel Scart
PC-avdio kabel
Kabel HDMI
Kabel HDMI/DVI
Uporaba stojala
je, da PDP nosi ve
Priporoljivo
oseb. PDP nikoli ne postavite
-20 ~ 20
Slovenina -
4_Sln.indd
2008-8-13
13:38:55
Nadzorna ploa
Sprednja (ali stranska) ploa
C/P.
Pritisnite za menjavo kanala. V meniju na
zaslonu uporabite gumba
C/P.
na
enak nain, kot uporabljate gumba in na
daljinskem upravljalniku.
ENTER
Na meniju na zaslonu ta gumb uporabljajte kot
gumb ENTER na daljinskem upravljalniku.
Gumb za vklop
Pritisnite za vklop in izklop televizorja.
Indikator napajanja
Utripa in se ugasne, ko je napajanje vklopljeno,
in zasveti v stanju pripravljenosti.
Senzor daljinskega upravljalnika
Daljinski upravljalnik usmerite proti tej toki na
televizorju.
7 Zvonik
Slovenina -
BN68-01743A-00Sln.indd
2008-8-13
11:12:34
Prikljuitvena ploa
Stranska ploa
1
2
ali
3 Vti za slualke
Slualke lahko prikljuite na televizor, da
program, ki ga gledate, ne moti ostalih oseb
v sobi.
Dalja uporaba slualk pri veji glasnosti
lahko pokoduje sluh.
Hrbtna ploa
1
ali
Televizijsko
kabelsko
omreje
8
ali
Kadar na televizor prikljuujete avdio ali video sistem, poskrbite, da so vsi elementi izkljueni.
Ko prikljuujete zunanjo napravo, mora biti barva prikljuka enaka barvi kabla.
Barva in oblika izdelka sta odvisni od modela.
se nadaljuje
Slovenina -
BN68-01743A-00Sln.indd
2008-8-13
11:12:38
1 POWER IN
Prikljuite priloeni napajalni kabel.
2 Prikljuitev zunanjih avdio naprav.
Zvoni signal RCA iz televizorja priklopite na
zunanji vir, na primer avdio sistem.
3 EXT 1, EXT 2
Vhodi oziroma izhodi za zunanje naprave, na
primer videorekorder, DVD-predvajalnik, video
igralna naprava ali predvajalnik video plo.
Specifikacije za vhod/izhod
Spojnik
Vhod
Izhod
Avdio (L/R
Video Avdio (L/R (L/D)) RGB Video +(L/D))
EXT 1
EXT 2
4 COMPONENT IN
Avdio (AUDIO L/R) in video (Y/PB/PR) vhodi za
komponente.
5 DIGITAL AUDIO OUT (OPTICAL)
Poveite z digitalno avdio komponento.
6 SERVICE
Spojnik za servis.
e elite z daljinskim upravljalnikom
prilagoditi kot gledanja televizorja,
morate v serijski vti televizorja prikljuiti
elektromotor stenskega nosilca.
7 PC IN / AUDIO
Za povezavo z vtiem video in avdio izhoda na
raunalniku.
8 Rea COMMON INTERFACE
Vreo vstavite kartico splonega vmesnika.
(oglejte si stran 45)
e pri nekaterih kanalih ni vstavljena
kartica za sploni vmesnik, se na zaslonu
prikae sporoilo Scrambled Signal.
V 2-3 minutah se prikaejo informacije
o zdruitvi s telefonsko tevilko, ID-jem
kartice za sploni vmesnik, ID-jem gostitelja
ter drugimi informacijami. e se prikae
sporoilo o napaki, se obrnite na ponudnika
storitev.
Ko je konfiguracijainformacij o kanalih
dokonana, se prikae sporoilo Updating
Completed, kar pomeni, da je seznam
kanalov zdaj posodobljen.
CI-kartico vstavite v smeri, kot je
oznaena na njej.
9 HDMI IN 1, HDMI IN 2
Za povezavo z vtiem HDMI naprave z
izhodom HDMI. Te vhode lahko uporabite
tudi kot povezavo DVI z loenimi analognimi
avdio vhodi. Za to povezavo potrebujete
dodaten kabel HDMI/DVI. Pri uporabi
dodatnega adapterja HDMI/DVI analogni
avdio vhodi DVI na televizorju omogoajo
sprejemanje levega in desnega avdio
kanala iz naprave DVI. (Ni zdruljivo z
osebnim raunalnikom.)
Ko izdelek prikljuujete preko HDMI ali DVI
na sprejemnik, DVD-predvajalnik, igralno
konzolo itn., mora biti ta nastavljen na nain
zdruljivega video izhoda, kot je prikazano v
spodnji tabeli. Sicer je lahko slika popaena,
razpade ali je ni.
Spojnika HDMI ne poskuajte povezati
z grafino kartico osebnega raunalnika
ali notesnika. (Sicer bo prikazan prazen
zaslon)
DVI IN (HDMI 2) AUDIO L/R
Avdio izhodi DVI za zunanje naprave.
0 ANT IN
Koaksialni spojnik z uporom 75 za anteno/
kabelsko omreje.
Podprti naini za HDMI in komponentno
HDMI/DVI, 50Hz
HDMI/DVI, 60Hz
Komponentno
Slovenina -
BN68-01743A-00Sln.indd
2008-8-13
11:12:38
se nadaljuje
Slovenina -
BN68-01743A-00Sln.indd
2008-8-13
11:12:40
Slovenina -
BN68-01743A-00Sln.indd
2008-8-13
11:12:40
Ogled menijev
1
2
3
4
5
TV
Picture
Mode
: Dynamic
Contrast 100
Brightness 45
Sharpness 75
Colour
55
Tint
G 50
R 50
Colour Tone
: Cool1
Detailed Settings
More
Move
Enter
Exit
Enter
Return
Language
Move
Enter
Skip
Move
Home
Enter
Skip
Enter
Skip
Move
Belgium
France
Germany
Italy
Enter
Skip
se nadaljuje
Slovenina - 10
BN68-01743A-00Sln.indd
10
2008-8-13
11:12:41
7
8
11
12
14
--
40 MHz
0 %
Enter
Skip
01
01
Adjust
Year
Hour
2007
12
Minute
:
Move
00
Enter
Services found: 0
Channel: -
0%
Start
Skip
Plug & Play
Scanning for digital services...
Services found: 6
Channel: 35
29%
Stop
13
Skip
Start
10
Enter
Plug & Play
Auto Store
P 1
No
Move
Skip
Plug & Play
The Iberian Peninsula and Balears Islands
Canarian Islands
Move
Select
Skip
se nadaljuje
Slovenina - 11
BN68-01743A-00Sln.indd
11
2008-8-13
11:12:43
Day
Year
01
15
2007
Hour
Minute
12
00
Adjust
Move
Select
Skip
TV
Setup
Plug & Play
Language
: English
Time
Game Mode
: Off
Blue Screen
: Off
Melody
: Off
PC
Home Theater PC : Off
Light Effect
: Off
More
Move
Enter
Return
TV
Input
Source List
: TV
Edit Name
Anynet+
Move
TV
Enter
Return
Source List
TV
Ext.1
Ext.2
AV
S-Video
Component
PC
HDMI1
HDMI2
HDMI3
DTV
Move
:
:
:
:
:
:
:
:
:
:
Enter
Return
Slovenina - 12
BN68-01743A-00Sln.indd
12
2008-8-13
11:12:44
Input
TV
Source List
: TV
Edit Name
Anynet+
drave).
Samodejno dodeljene tevilke programov mogoe ne ustrezajo
dejanskim ali elenim tevilkam programov. tevilke lahko
razvrstite rono in izbriete vse neelene kanale.
1 Pritisnite gumb MENU, da prikaete meni.
2 S pritiskom gumba ali izberite Channel, nato pa pritisnite
gumb ENTER/OK.
3 Ponovno pritisnite gumb ENTER/OK. Navedene so razpololjive
drave.
4 e elite izbrati dravo, pritisnite gumb ali in nato ENTER/OK.
eprav ste v tem meniju spremenili nastavitev drave,
sprememba ne vpliva na DTV. e elite spremeniti
nastavitev drave za DTV, uporabite funkcijo Plug & Play.
(Oglejte si strani 1012.)
5 e elite izbrati Auto Store, pritisnite gumb ali in nato
ENTER/OK.
6 Za zaetek iskanja znova pritisnite gumb ENTER/OK.
Iskanje se samodejno zakljui.
Za predasno prekinitev iskanja pritisnite gumb MENU ali
ENTER/OK.
Return
Edit Name
Ext.1
Ext.2
AV
S-Video
Component
PC
HDMI1
HDMI2
HDMI3
:
: VCR
: DVD
: D-VHS
:
Cable STB
:
HD STB
:
Satellite STB
:
:
Move
Enter
TV
Return
Channel
Belgium
Country
: Belgium
Auto Store
France
Manual Store Germany
Channel Manager
Italy
Sort
Netherlands
Name
Spain
Fine Tune
LNA
: Off
Move
Enter
TV
Return
Channel
Country
: Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA
: Off
Enter
TV
Move
Move
Enter
Return
Auto Store
P 1
--
40 MHz
0 %
Start
Enter
Return
Slovenina - 13
BN68-01743A-00Sln.indd
13
2008-8-13
11:12:45
TV
Channel
Country
: Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA
: Off
TV
Move
Enter
Return
Manual Store
Programme
Colour System
Sound System
Channel
Search
Store
: P 1
: Auto
: BG
: C
4
: 63 MHz
: ?
mode
Channel
P (Programski nain): Po konani naravnavi so oddajnim postajam na vaem obmoju dodeljene
tevilke poloajev od P00 do P99. Kanal lahko izberete z vnosom tevilke poloaja v tem nainu.
C (nain obiajne antene): Kanal lahko izberete z vnosom doloene tevilke za posamezno
oddajno postajo v tem nainu.
S (nain kabelskega kanala): Kanal lahko izberete z vnosom doloene tevilke za vsak kabelski
kanal v tem nainu.
Slovenina - 14
BN68-01743A-00Sln.indd
14
2008-8-13
11:12:45
Dodajanje/zaklepanje kanalov
Ni na voljo v nainu DTV ali nainu zunanjega vhoda.
TV
kanale.
1 Pritisnite gumb MENU, da prikaete meni.
2 S pritiskom gumba ali izberite Channel, nato pa pritisnite
gumb ENTER/OK.
3 S pritiskom gumba ali izberite Channel Manager, nato pa
pritisnite gumb ENTER/OK.
Dodajanje kanalov
S seznamom kanalov lahko dodajate kanale.
4
5
Channel
Country
: Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA
: Off
Move
TV
Enter
Return
Channel Manager
Channel List
Child Lock
: Off
Zaklepanje kanalov
Ta funkcija prepreuje gledanje neprimernega programa
nepooblaenim uporabnikom (na primer otrokom) tako, da preprei
predvajanje slike in zvoka.
6
Move
Enter
Return
Channel List
P 1 C4
1 / 10
Prog.
0
1
2
3
4
5
6
7
8
9
C -C4
C 24
C2
C5
C 80
C7
C 36
C 52
C 11
Add
Move
Page
Lock
Enter
Return
Slovenina - 15
BN68-01743A-00Sln.indd
15
2008-8-13
11:12:47
shranjenih kanalov.
To postopek boste mogoe morali izvesti po uporabi funkcije
samodejnega shranjevanja.
1 Pritisnite gumb MENU, da prikaete meni.
2 S pritiskom gumba ali izberite Channel, nato pa pritisnite
gumb ENTER/OK.
3 S pritiskom gumba ali izberite Sort, nato pa pritisnite
gumb ENTER/OK.
4 S pritiskom na gumb ali izberite kanal, ki ga elite
premakniti, nato pa pritisnite gumb ENTER/OK.
5 Z gumbom ali izberite tevilko programa, na katero elite
premakniti kanal.
Pritisnite gumb ENTER/OK. Kanal je premeen na nov
poloaj, skladno s tem pa so premeeni tudi ostali kanali.
6 Koraka 4 in 5 ponavljajte, dokler niso vsi kanali premeeni na
elene tevilke programov.
7 Pritisnite gumb EXIT za izhod.
Poimenovanje kanalov
Ni na voljo v nainu DTV ali nainu zunanjega vhoda.
TV
Channel
Country
: Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA
: Off
Move
TV
Enter
Return
Sort
Prog.
0
1
2
3
4
Move
TV
Ch. Name
C
C76
C5
C6
C7
Enter
Return
Channel
Country
: Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA
: Off
Move
TV
Enter
Return
Name
Prog.
0
1
2
3
4
Move
Ch.
C
C76
C5
C6
C7
Enter
Name
Return
Slovenina - 16
BN68-01743A-00Sln.indd
16
2008-8-13
11:12:48
TV
Channel
Country
: Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA
: Off
Enter
Return
Fine Tune
P 1
Move
+3
Reset
Adjust
Save
Return
P 1*
Mono
Picture
Sound
SRS TS XT
:
: Dynamic
: Custom
: Off
Country
: Belgium
Auto Store
Channel Manager
Fine
Tune
gumb ENTER/OK.
LNA
: Off
Slovenina - 17
BN68-01743A-00Sln.indd
17
2008-8-13
11:12:48
TV
Picture
Mode
: Dynamic
Contrast 100
Brightness 45
Sharpness 75
Colour
55
Tint
G 50
R 50
Colour Tone
: Cool1
Detailed Settings
More
Move
TV
Enter
Return
Picture
Dynamic
Mode
: Dynamic
Standard
Contrast
100
Movie
Brightness
45
Sharpness 75
Colour
55
Tint
G 50
R 50
Colour Tone
: Cool1
Detailed Settings
More
Move
Enter
Return
TV
Picture
Mode
: Dynamic
Contrast 100
Brightness 45
Sharpness 75
Colour
55
Tint
G 50
R 50
Colour Tone
: Cool1
Detailed Settings
More
TV
Move
Enter
Return
Picture
Mode
: Dynamic
Contrast 100
Brightness 45
Sharpness 75
Colour
55
Tint
G 50
Cool2 R 50
Colour Tone
: Cool1
Cool1
Detailed Settings Normal
Warm1
More
Warm2
Slovenina - 18
BN68-01743A-00Sln.indd
18
2008-8-13
11:12:49
TV
Picture
Mode
: Movie
Contrast 80
Brightness 65
Sharpness 35
Colour
35
Tint
G 50
R 50
Colour Tone
: Warm2
Detailed Settings
More
TV
Standard.
Enter
Return
Detailed Settings
Black Adjust
: Off
Dynamic Contrast : Low
Gamma
: 0
White Balance
My Colour Control
Edge Enhancement : Off
Colour Space
: Wide
Move
Move
Enter
Return
Slovenina - 19
BN68-01743A-00Sln.indd
19
2008-8-13
11:12:50
Picture
More
Size
Screen Mode
Digital NR
Active Colour
DNIe
Movie Plus
Reset
Move
: Auto Wide
: 16 : 9
: Auto
: On
: Off
: On
: OK
Enter
Return
Size
Auto Wide
16:9
Wide Zoom
Zoom
4:3
Just Scan
Move
Enter
Return
Spreminjanje velikosti zaslona z uporabo funkcije Zoom omogoa doloanje poloaja in velikosti
zaslona v smeri navzgor/navzdol z gumbom ali .
Ko z gumbom ali izberete , pomaknite zaslon navzgor/navzdol z gumbom ali .
Ko z gumbom ali izberete , spremenite velikost zaslona navpino z gumbom ali .
TV
Picture
More
Size
Screen Mode
Digital NR
Active Colour
DNIe
Movie Plus
Reset
Move
: Auto Wide
: 16 : 9
: Off
: On
: Off
: On
: OK
Enter
Return
Slovenina - 20
BN68-01743A-00Sln.indd
20
2008-8-13
11:12:51
TV
Picture
Pritisnite gumb MENU, da prikaete meni.
More
S pritiskom na gumb ENTER/OK izberite Picture.
Size
: Auto Wide
S pritiskom gumba ali izberite eleno monost, nato pa
Screen Mode
: 16 : 9
Digital NR
: Auto
DNIe
: Off
Monosti, ki so na voljo: Digital NR, Active Colour, DNIe,
Movie Plus
: On
Movie Plus
Reset
: OK
Slovenina - 21
BN68-01743A-00Sln.indd
21
2008-8-13
11:12:52
Zvone funkcije
1
2
TV
Sound
Pritisnite gumb MENU, da prikaete meni.
Mode
: Custom
S pritiskom gumba ali izberite Sound, nato pa pritisnite
Equalizer
gumb ENTER/OK.
SRS TS XT
: Off
Auto Volume
: Off
Sound Select
: Main
Mode
: Custom
doloene oddaje.
Equalizer
SRS TS XT
: Off
Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz
Auto Volume
: Off
Internal Mute
: Off
kakovost zvoka.
Reset
e spremenite te nastavitve, se zvoni nain samodejno
nastavi na Custom.
SRS TS XT: Off/On
Move
Enter
Return
TruSurround XT je patentirana tehnologija SRS za predvajanje
5.1-vekanalne vsebine preko dveh zvonikov. TruSurround
TV
Equalizer
proizvaja odlien, navidezni prostorski na kateremkoli
sistemu z dvema zvonikoma, tudi preko notranjih zvonikov
R
+
+
televizorja. Tehnologija je popolnoma zdruljiva z vsemi
0
0
vekanalnimi formati.
TruSurround XT, SRS in simbol
L
so blagovne znamke podjetja SRS
Balance 100Hz 300Hz 1kHz 3kHz 10kHz
Labs, Inc. Tehnologija TruSurround XT
je vgrajena pod licenco podjetja SRS
Move
Adjust
Return
Labs, Inc.
Auto Volume: Off/On
Vsaka postaja ima svoje signalne pogoje, zato ni enostavno regulirati glasnosti ob vsaki zamenjavi
kanala. Ta funkcija omogoa samodejno regulacijo glasnosti elenega kanala z znianjem glasnosti
v primeru visokega modulacijskega signala ali zvianjem glasnosti v primeru nizkega modulacijskega
signala.
Internal Mute: Off/On
e elite sliati zvok iz loenih zvonikov, izklopite notranji ojaevalnik.
Gumbi +, - in MUTE ne delujejo, ko je vklopljena funkcija Internal Mute.
Sound Select: Main/Sub
Ko je aktivirana funkcija PIP, lahko posluate zvok podslike.
Main: Za posluanje zvoka glavne slike.
Sub: Za posluanje zvoka podslike.
Ponastavitev
e monost Game nastavite na On, se aktivira funkcija Reset Sound. e po nastavitvi izenaevalnika
izberete funkcijo Reset se nastavitev izeneevalnika ponastavi na tovarnike vrednosti.
Slovenina - 22
BN68-01743A-00Sln.indd
22
2008-8-13
11:12:53
Indikator na zaslonu
Obiajna oddaja
(standardni avdio)
NICAM
Mono
(Obiajno)
NICAM stereo
NICAM
Stereo
Mono
(Obiajno)
NICAM
Stereo
NICAM DUAL-I/II
A2
Stereo
NICAM
Dual-1
Obiajna oddaja
(standardni avdio)
Dvojezino ali DUAL-I/II
Dual-I
Stereo
Stereo
NICAM
Dual-2
Mono
(Obiajno)
Slovenina - 23
BN68-01743A-00Sln.indd
23
2008-8-13
11:12:53
asovne funkcije
1
2
TV
Setup
Pritisnite gumb MENU, da prikaete meni.
gumb ENTER/OK.
Time
Game Mode
: Off
Melody
: Off
gumb ENTER/OK.
PC
Light Effect
: Off
pritisnite gumb ENTER/OK.
More
Monosti, ki so na voljo: Clock Set, Sleep Timer, Timer 1,
Move
Enter
Return
Timer 2, Timer 3
TV
Time
5 Ko ste zadovoljni z nastavitvijo, pritisnite gumb ENTER/OK.
Clock Set
: :
6 Pritisnite gumb EXIT za izhod.
Sleep Timer
: Off
Clock Set
Timer 1
: Inactivated
Timer 2
: Inactivated
Uro na televiziji lahko nastavite, tako da se bo ob pritisku na
Timer 3
: Inactivated
gumb INFO na daljinskem upravljalniku izpisal tekoi as. e
elite uporabljati samodejni vklopni in izklopni asovnik, morate
nastaviti as.
Pritisnite gumb ali , da izberete Month, Day, Year, Hour
Move
Enter
Return
ali Minute. Nastavite jih s pritiskom na gumb ali .
Nastavitve Month, Day, Year, Hour ali Minute lahko
TV
Timer 1
nastavite neposredno s pritiskom na tevilske gumbe na
On Time
daljinskem upravljalniku.
00 :
00
No
e pride do prekinitve napajanja ali e je televizor izklopljen
Off Time
00 :
00
No
iz napajanja, bodo nastavitve za uro izgubljene.
Repeat
Volume
Sleep Timer
Once
10
Izberete lahko asovno obdobje od 30 do 180 minut za
Programme
samodejni preklop televizorja v stanje pripravljenosti.
01
Izberite prednastavljeni asovni interval (Off, 30, 60, 90, 120,
Move
Adjust
Return
150 ali 180) s pritiskom na gumb ali .
Timer 1/Timer 2/Timer 3
asovnik za vklop/izklop lahko nastavite, tako da se bo televizor
samodejno vklapljal ali izklapljal ob izbranem asu.
Najprej morate nastaviti uro.
Za izbiro elenega elementa pritisnite gumb ali .
Z gumbom ali izberite eleno nastavitev.
On Timer: Izberite ure, minute in No/Yes. (Za aktivacijo asovnika z izbrano nastavitvijo izberite
Yes.)
Off Timer: Izberite ure, minute in No/Yes. (Za aktivacijo asovnika z izbrano nastavitvijo izberite
Yes.)
Repeat: Izberite Once, Everyday, Mon~Fri, Mon~Sat ali Sat~Sun.
Volume: Izberite eleno glasnost.
Programme: Izberite eleni kanal.
Uro, minute in kanal lahko nastavite neposredno s pritiskom tevilskih gumbov na daljinskem
upravljalniku.
Power Off
Auto
Ko je asovnik nastavljen na On, se bo televizor izklopil, e ne pritisnete nobenega gumba tri ure
zatem, ko je asovnik vklopil televizor. Ta funkcija je na voljo samo, ko je asovnik nastavljen na On,
in prepreuje pregrevanje, do katerega lahko pride, e je televizor predolgo vklopljen.
Slovenina - 24
BN68-01743A-00Sln.indd
24
2008-8-13
11:12:54
TV
Setup
Pritisnite gumb MENU, da prikaete meni.
gumb ENTER/OK.
Time
Game Mode
: Off
Melody
: Off
Monosti, ki so na voljo: Language, Blue Screen, Melody,
Home Theater PC : Off
Light
Effect
: Off
Light Effect, Energy Saving, HDMI Black Level
More
4 Ko ste zadovoljni z nastavitvijo, pritisnite gumb ENTER/OK.
Move
Enter
Return
5 Pritisnite gumb EXIT za izhod.
TV
Setup
Language
More
Je razlien, odvisno od modela. Ob prvi uporabi televizorja
Wall-Mount Adjustment
vrednosti.
PIP
Slovenina - 25
BN68-01743A-00Sln.indd
25
2008-8-13
11:12:54
Language
: English
izkunjo.
Time
Game Mode
: Off
PC
gumb ENTER/OK.
Home Theater PC : Off
Light Effect
: Off
3 S pritiskom gumba ali izberite Game Mode, nato pa
More
pritisnite gumb ENTER/OK.
Move
Enter
Return
4 S pritiskom gumba ali izberite On ali Off, nato pa pritisnite
gumb ENTER/OK.
5 Pritisnite gumb EXIT za izhod.
e elite izkljuiti igralno konzolo in prikljuiti drugo zunanjo napravo, v meniju slike prekliite
nain igre.
e meni televizorja prikaete v nainu Game, se slika na zaslonu rahlo trese.
Game Mode ni na voljo v nainu TV.
e je Game Mode nastavljen na On:
Se Picture Mode samodejno nastavi na Standard, ki ga uporabnik ne more spremeniti.
Sound Mode in meni Sound se izklopita. Zvok prilagodite z izenaevalnikom.
Aktivira se funkcija Reset Sound. e po nastavitvi izenaevalnika izberete funkcijo Reset, se
nastavitev izeneevalnika ponastavi na tovarnike vrednosti.
Slovenina - 26
BN68-01743A-00Sln.indd
26
2008-8-13
11:12:55
Odprtje menija
1
2
3
TV
Setup
More
Wall-Mount Adjustment
Energy Saving
: Off
HDMI Black Level : Low
PIP
Screen Burn Protection
Gumb
Enter
Return
Wall-Mount Adjustment
Position1
Position
Adjust
Move
1
INFO
2
Center
3
Exit
Delovanje
Prilagoditev kota opreme za
pritrditev na steno
Ponastavitev
Slovenina - 27
BN68-01743A-00Sln.indd
27
2008-8-13
11:12:56
Setup
More
Wall-Mount Adjustment
Energy Saving
: Off
HDMI Black Level : Low
PIP
Screen Burn Protection
Move
Enter
Return
PIP
PIP
Source
Size
Position
Programme
: On
: TV
:
:
: P 1
Move
Enter
Return
O
O
O
O
O
O
O
O
O
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Slovenina - 28
BN68-01743A-00Sln.indd
28
2008-8-13
11:12:57
TV
Setup
More
Wall-Mount Adjustment
Energy Saving
: Off
HDMI Black Level : Low
PIP
Screen Burn Protection
TV
Move
Enter
Return
Move
TV
Enter
Return
Pixel Shift
Pixel Shift
Horizontal Dot
Vertical Line
Time
: On
: 2
: 2
: 2 min
PC
Horizontal Dot
Vertical Line
Time (minute)
1
1
2 min
TV/Ext/AV/S-Video/
Component/HDMI/DTV
2
2
2 min
Move
Enter
Return
Vrednost Pixel Shift slikovne pike je odvisna od velikosti monitorja (palcev) in naina.
All White: Ta funkcija pomaga pri odstranjevanju zakasnele slike z zaslona tako, da barvo slikovnih
pik spremeni v belo. Uporabite jo, ko so na ekranu prikazane zakasnele slike ali simboli. e posebej
je uporabna, e je na zaslonu bila zelo dolgo prikazana mirujoa slika.
Signal Pattern: Ta funkcija pomaga pri odstranjevanju zakasnele slike z zaslona, tako da vse
slikovne pike na zaslonu PDP premika po doloenem vzorcu. Uporabite jo, ko so na ekranu
prikazane zakasnele slike ali simboli. e posebej je uporabna, e je na zaslonu bila zelo dolgo
prikazana mirujoa slika.
Side Gray: Ko televizor gledate v razmerju slike 4:3, se s prilagoditvijo izravnave belin na skrajnje
levi in skrajnje desni strani televizorja preprei koda.
Dark: Ko gledate televizor z razmerjem slike 4:3, potemni levo in desno stran.
Light: Ko gledate televizor z razmerjem slike 4:3, posvetli levo in desno stran.
Za odstranjevanje zakasnele slike z zaslona uporabite funkcijo All White ali Signal Pattern. eprav
obe funkciji odstranita zakasnelo sliko z zaslona, je funkcija Signal Pattern bolj uinkovita.
Funkcijo za odstranjevanje zakasnele slike je treba izvajati dalj asa (priblino eno uro), e elite
uinkovito odstraniti zakasnelo sliko. e po izvajanju funkcije ni izboljanja pri zakasneli sliki,
ponovite funkcijo.
Za preklic te funkcije pritisnite katerikoli gumb na daljinskem upravljalniku.
Slovenina - 29
BN68-01743A-00Sln.indd
29
2008-8-13
11:12:58
Slovenina - 30
BN68-01743A-00Sln.indd
30
2008-8-13
11:12:58
Nain vhoda PC
Poloaj in velikost zaslona se razlikujeta glede na vrsto raunalnikega monitorja in njegovo
loljivost.
V spodnji tabeli so prikazani podprti naini prikaza:
Video signal
Loljivost
640 x 350
720 x 400
640 x 480
Zdruljivo z
IBM PC/AT
800 x 600
1024 x 768
Navpina
frekvenca
(Hz)
70.086
70.087
59.940
70.000
72.809
75.000
60.317
70.000
72.188
75.000
60.004
70.069
72.000
75.029
Vodoravna
frekvenca
(kHz)
31.469
31.469
31.469
35.000
37.861
37.500
37.879
43.750
48.077
46.875
48.363
56.476
57.672
60.023
Navpina
polariteta
Vodoravna
polariteta
PS42A417
N
P
N
N/P
N
N
P
N/P
P
P
N
N
N/P
P
P
N
N
N/P
N
N
P
N/P
P
P
N
N
N/P
P
Slovenina - 31
BN68-01743A-00Sln.indd
31
2008-8-13
11:12:58
Nastavitev raunalnika
Nain PC prednastavite tako, da pritisnete gumb SOURCE.
1
2
TV
Setup
Plug & Play
Language
: English
Time
Game Mode
: Off
Blue Screen
: Off
Melody
: Off
PC
Home Theater PC : Off
Light Effect
: Off
More
Move
Enter
TV
Return
PC
Image Lock
Position
Auto Adjustment
Image Reset
Move
TV
Enter
Return
Image Lock
Coarse
Fine
Move
TV
50
31
Enter
Return
Position
Move
Enter
Return
Slovenina - 32
BN68-01743A-00Sln.indd
32
2008-8-13
11:12:59
Return
Slovenina - 33
BN68-01743A-00Sln.indd
33
2008-8-13
11:12:59
Guide
Default Guide
Move
: Full Guide
Enter
Exit
Channel
Auto Store
Manual Store
Channel List
Move
Enter
Exit
Setup
Menu Transparency : Medium
Parental Lock
Subtitle : On
Move
Enter
Exit
se nadaljuje
Slovenina - 34
BN68-01743A-00Sln.indd
34
2008-8-13
11:13:00
Language
Audio Language
Subtitle Language
Teletext Language
Preference
Language
Audio Language
Subtitle Language
Teletext Language
Preference
Move
Enter
Exit
All Channels
14:20 - 14:33
Contains video with AFD O; coded frame
is 16:9
Exit
Slovenina - 35
BN68-01743A-00Sln.indd
35
2008-8-13
11:13:02
Channel
Meni je sestavljen iz 4 podmenijev:
Auto Store, Manual Store, Edit Favourite Channels in
Channel Manger.
S pritiskom gumba ali izberite Channel, nato pa
pritisnite gumb ENTER/OK. Prikae se meni Channel.
Channel
Auto Store
Manual Store
Channel List
Move
Enter
Exit
Channel
Auto Store
Manual Store
Channel List
Move
Enter
Return
Auto Store
0%
Services found: 0
Channel: -
Start
Return
(09).
Edit Favourite Channels
samodejno nastavljena.
Frequency
S tevilskimi gumbi (09) lahko navedete frekvenco
Move
Enter
Return
(KHz). e ne poznate tone frekvence, sledite zgornjem
Manual Store
postopku, kjer je razloena samodejna izbira frekvence
s kanali.
Channel Frequency
Bandwidth
Bandwidth
5
177500 KHz 7 MHz
Za izbiro pasovne irine pritisnite gumb ali . Na voljo
sta pasovni irini 7 in 8 MHz.
Za zaetek iskanja digitalnih storitev pritisnite rdei gumb.
Ko se iskanje dokona, so posodobljeni kanali v seznamu
Search
kanalov.
Adjust
Return
Vnose lahko izvedete s pritiskom gumba na daljinskem
upravljalniku.
Ne morete spremeniti samo frekvence. Pri spreminjanju kanala se frekvenca samodejno
spremeni.
se nadaljuje
Slovenina - 36
BN68-01743A-00Sln.indd
36
2008-8-13
11:13:03
Channel
1.3 Edit Favourite Channels
Priljubljene kanale lahko urejate z barvnimi gumbi.
Auto Store
2
Five
Select None: Preklie izbor vseh kanalov.
3
BBC THREE
Preview: Prikae trenutno izbrane kanale.
4
abc1
5
QVC
Pri dokonani nastavitvi priljubljenih kanalov.
Add
Select All
Select None
Preview
To funkcijo lahko uporabite, ko ste izbrali en ali ve
Move
Select
Return
priljubljenih kanalov.
Edit Favourite Channels
Pritisnite rdei gumb v meniju Edit Favourite Channels.
e elite dodati ve kanalov, si oglejte prejnji razdelek.
1
BBC TWO
se nadaljuje
Slovenina - 37
BN68-01743A-00Sln.indd
37
2008-8-13
11:13:04
Channel List
1.4 Channel List
BBC TWO
A
ll Channels-All
Prikaete lahko seznam vseh kanalov ali samo priljubljenih
1. Test Card M...
806 arte
40. BBC NEWS24
kanalov.
51. BBCi
2. BBC TWO
800 ARD-MHP-DATA
S pritiskom gumba ali izberite Channel List, nato pa 3.4. Vida003b
801 ARD-OnLine-K..
Vida004b
802 BBC ONE
5. Vida005b
pritisnite gumb ENTER/OK.
803 MDR FERNSE..
6. Vida006b
804 NDR FERNSEH..
Seznam pa lahko tudi preprosto prikaete s pritiskom 7. BBC THREE
30. CBBC Channel
805 Vida002b
na gumb CH LIST.
Previous Page
Next Page
Favourites
TV
S pritiskom rumenega gumba se pomikajte med
Move
Watch
Exit
priljubljenimi in vsemi kanali.
Priljubljeni kanali so prikazani samo, e so bili predhodno
nastavljeni v meniju Edit Favourite Channels(oglejte si
strani 37).
Pritisnite rdei ali zeleni gumb, da prikaete prejnjo ali
naslednjo stran seznama kanalov.
S pritiskom gumba ali izberite eleni kanal za prikaz,
nato pa pritisnite gumb ENTER/OK.
Med menjavanjem kanalov se v zgornjem levem kotu prikaejo tevilka, ime kanala in ikona.
tevilka in ime kanala se prikaeta, e je kanal en od vseh kanalov, ikona pa, e je kanal
en od priljubljenih.
Pritisnite modri gumb ali gumb CH LIST za izhod iz seznama kanalov.
Guide
Meni je sestavljen iz 4 podmenijev:
Now & Next Guide, Full Guide, Scheduled List in Default
Guide.
2.1 Now & Next Guide/Full Guide
Informacije EPG (Electronic Programme Guide) posredujejo
izdajatelji televizijskega programa. Informacije o programu so
lahko zastarele ali jih ni, kar je posledica oddajanja informacij
doloene televizijske postaje.
Zaslon se bo dinamino posodobil takoj, ko bodo na voljo nove
informacije.
Now & Next Guide
Za est kanalov, ki so navedeni v levem stolpcu, prikae
informacije o trenutnem in naslednjem programu.
Full Guide
Informacije o programu so prikazane v 30-minutnih
presledkih. Prikazane so informacije o eni uri in pol
programa, po katerih se lahko pomikate naprej ali nazaj
glede na as.
S pritiskom gumba ali izberite Now & Next Guide ali
Full Guide. Pritisnite gumb ENTER/OK. Prikae se meni
izbranega vodia.
Za preklop med vodiem Now & Next Guide in Full
Guide pritisnite rdei gumb.
Za prikaz seznama Favourites ali All Channels
pritisnite zeleni gumb.
Za hitro pomikanje nazaj (24 uri) pritisnite rumeni gumb.
Za hitro pomikanje naprej (24 uri) pritisnite modri gumb.
Meni vodia lahko prikaete tudi s pritiskom gumba
GUIDE.
Za ogled programa na seznamu EPG pritisnite gumb
/// in izberite eleni program, nato pa pritisnite
gumb ENTER/OK.
e je izbran naslednji program, je dodan na razpored
s prikazano z ikono ure. e znova pritisnete ENTER/
OK, je razpored preklican in ikona ure izgine. Za
podrobnosti o doloanju razporeda programov, si
oglejte ustrezni razdelek.
Now
Watch
Full Guide
Next
Favourites
Exit
se nadaljuje
Slovenina - 38
BN68-01743A-00Sln.indd
38
2008-8-13
11:13:05
Za ogled informacij o programu z gumbom /// izberite eleni program in nato pritisnite
gumb INFO.
V zgornjem desnem kotu zaslona bodo prikazane informacije, na primer tevilka kanala,
naslov programa in as predvajanja, statusna vrstica ter kratek povzetek oznaenega
programa. e je na voljo dolg povzetek, je prikazan simbol . e si elite ogledati
celotno besedilo povzetka, pritisnite gumb INFO.
Prikazanih je est kanalov. Med kanali se pomikate z gumbom ali . Stran za stranjo
prikaete s pritiskom gumba P
ali
gumba.
2.2 Scheduled List
Scheduled List
e ustvarite seznam programov, ki si jih elite ogledati, se
Thursday 22 Apr
15:30 ~ 18:00 Once
2 BBC TWO
Animal Park
kanal ob nartovanem asu samodejno preklopi na nartovani
Thursday 22 Apr 20:00 ~ 21:00 Once
program, tudi e gledate drugega.
2 BBC TWO
The Hairy Bikers
e elite dodati nov program, pritisnite rdei gumb. Prikae
se meni za dodajanje programa z izbrano postavko
Channel.
Add Programme
Edit
Delete
Za nastavitev elenega kanala, asa, datuma in frekvence
Move
Return
pritiskajte gumba / in ENTER/OK. Ko ste zadovoljni z
nastavitvami, s pritiskom na rdei gumb shranite prilagojeni
Scheduled List
razpored.
Channel
810 Super RTL
e elite urediti razporejeni program, ga izberite z gumbom
Time
10 : 15 to - - : - ali , nato pa pritisnite zeleni gumb. e je potrebno, z
gumbom ali izberite program za brisanje in pritisnite
Thu 03 Mar 2005
Date
modri gumb.
Frequency
Pri gledanju analognega televizijskega signala ni
Save
Cancel
mogoe spremeniti rezerviranega kanala DTV. Kanal
Adjust
Move
Return
se samodejno spremeni samo pri gledanju digitalne
televizije (DTV).
Dodajanje programov v razpored deluje samo pri
vklopljenem televizorju in ne v nainu mirovanja. Za
podrobnosti o samodejnem vklopu in izklopu televizorja
si oglejte stran 9.
Guide
Now & Next Guide
Full Guide
Scheduled List
Default Guide
Move
: Full Guide
Enter
Return
Guide
Now & Next Guide
Full Guide
Scheduled List
Default Guide
Move
Now/Next
: Full
Guide
Full Guide
Enter
Return
se nadaljuje
Slovenina - 39
BN68-01743A-00Sln.indd
39
2008-8-13
11:13:07
Guide
Now & Next Guide
Full Guide
Scheduled List
Default Guide
Move
: Full Guide
Enter
Return
Now
Next
Watch
Full Guide
Favourites
Exit
Watch
Full Guide
3. Language
Meni je sestavljen iz 4 podmenijev:
Audio Language, Subtitle Language, Teletext Language in
Preference.
No
Favourites
Exit
Language
Audio Language
Subtitle Language
Teletext Language
Preference
Move
Enter
Return
se nadaljuje
Slovenina - 40
BN68-01743A-00Sln.indd
40
2008-8-13
11:13:08
Language
3.2 Preference
Meni je sestavljen iz 6 podmenijev:
Audio Language
Primary Audio Language, Secondary Audio Language,
Subtitle Language
Primary Subtitle Language, Secondary Subtitle Language,
Teletext Language
Primary Teletext Language in Secondary Teletext Language.
Preference
se nadaljuje
Slovenina - 41
BN68-01743A-00Sln.indd
41
2008-8-13
11:13:09
4. Setup
Meni je sestavljen iz 8 podmenijev:
Menu Transparency, Parental Lock, Subtitle, Subtitle Mode,
Digital Text, Time Zone, Audio Format in System.
4.1 Menu Transparency
Nastavite lahko prosojnost menija na zaslonu.
Z gumbom ali izberite eleno monost (High,
Medium, Low ali Opaque), nato pa pritisnite gumb
ENTER/OK.
Setup
Menu Transparency : Medium
Parental Lock
Subtitle : On
Move
Enter
Return
Setup
Menu Transparency : Medium
High
Parental Lock Medium
Low
Subtitle : On
Opaque
Subtitle Mode : Normal
Audio Format : PCM
Move
Enter
Return
Setup
Menu Transparency : Medium
Parental Lock
Subtitle : On
Move
Enter
Return
Parental Lock
Enter PIN
..
Enter PIN
Return
Change PIN
Enter New PIN
..
Enter PIN
Return
se nadaljuje
Slovenina - 42
BN68-01743A-00Sln.indd
42
2008-8-13
11:13:10
Setup
4.3 Subtitle/Subtitle Mode/Audio Format/Digital Text
V skladu s svojimi eljami lahko uporabite razline nastavitve.
Menu Transparency : Medium
izbranega menija.
Audio Format : PCM
Audio Format
Move
Enter
Return
Zvok Dolby Digital lahko posluate samo z avdio
Setup
sprejemnikom, ki je prikljuen z optinim kablom. Zvok PCM
Menu Transparency : Medium
System
Move
Enter
Return
se nadaljuje
Slovenina - 43
BN68-01743A-00Sln.indd
43
2008-8-13
11:13:12
4.5 System
Meni je sestavljen iz 5 podmenijev:
Product Information, Signal Information, Software Upgrade,
Common Interface in Reset.
Product Information
Ogledate si lahko informacije o izdelku. Za servis ali
popravilo se obrnite na pooblaenega Samsungovega
trgovca.
Ob izbrani nastavitvi Product Information izberite
ENTER/OK. Prikae se meni z informacijami o izdelku.
Software Version/Firmware Version
Signal Information
Poiete lahko informacije o stanju signala.
Ob izbrani nastavitvi Signal Information izberite
ENTER/OK. Prikaejo se tehnine informacije za stanje
signala.
Service/Service ID/Multiplex/Network/Bit error
level/Signal Strength
Software Upgrade
Da bi bil izdelek opremljen z najnovejimi funkcijami
digitalne televizije, so nadgradnje programske opreme
redno oddajane kot del obiajnega televizijskega signala.
Televizor samodejno zazna take signale in prikae obvestilo
o nadgradnji programske opreme. Imate monost namestitve
nadgradnje.
Software Information
Pritisnite gumb ENTER/OK. Prikae se trenutna razliica
programske opreme. e elite prikazati informacije o
razliici programske opreme, znova pritisnite gumb
ENTER/OK.
Manual Upgrade
Pritisnite gumb ENTER/OK za iskanje nove programske
opremo kanalov, ki trenutno oddajajo.
Standby Mode Upgrade: On / Off
Pritisnite gumb ENTER/OK. e elite nadaljevati
nadgradnjo programske opreme z vklopljenim glavnim
napajanjem, s pritiskom gumba ali izberite On.
45 minut po preklopu v stanje pripravljenosti se
samodejno izvede rona nadgradnja. Ker je napajanje
enote vklopljeno notranje, lahko PDP rahlo sveti. Ta
pojav lahko traja ve kot 1 uro, dokler nadgradnja
programske opreme ni dokonana.
Setup
Digital Text
Time Zone
System
Move
Enter
Return
System
Product Information
Signal Information
Software Upgrade
Common Interface
Reset
Move
Enter
Return
Product Information
Software Version: T_BDXPDEU00_0710
Firmware Version: T_STDEU7_102c
Return
Signal Information
Service: ?
Service ID: 0000
Multiplex: ? (TSID 0000,ONID 0000)
Network: ? (ID 0000)
Bit error level:
10
Signal Strength:
0
Return
Software Upgrade
Software Information
Manual Upgrade
Move
Enter
Return
se nadaljuje
Slovenina - 44
BN68-01743A-00Sln.indd
44
2008-8-13
11:13:13
Application Info.
Common Interface
Namestitev kartice CI
Type: CA
a. Modul CI CAM kupite pri najblijem trgovcu ali po
Manufacturer: Canal Plus
telefonu.
Info: Top Up TV
b. Kartico za sploni vmesnik vstavite v CAM v smeri
puici, da se zaskoi na mestu.
c. CAM z nameeno kartico za sploni vmesnik vstavite
v reo za sploni vmesnik.
Return
CAM vstavite v smeri puice do konca tako, da
je vzporeden z reo.
d. Preverite, ali na kanalu z motenim signalom vidite
sliko.
CAM lahko namestite kadarkoli, ne glede na to, ali
je televizor vklopljen ali izklopljen.
Application Info.
Prikae informacije o CAM-u, ki je vstavljen v reo za
sploni vmesnik.
Enter
Exit
Move
Pritisnite gumb ENTER/OK, da prikaete informacije o
aplikaciji.
CI Menu
Uporabniku mogoa izbiro elementa iz menija, ki podpira
CAM.
Pritisnite gumb ENTER/OK. Prikaejo se monosti izbranega menija.
Za izbiro elene monosti pritisnite gumb ali , nato pa pritisnite gumb ENTER/OK.
Meni splonega vmesnika izberite glede na meni PC-kartice.
Reset
Reset
Shranjene vrednosti lahko ponastavite na tovarnike.
WARNING: All channel settings and user
Funkcija Reset izbrie vse informacije o kanalih in
preferences will be lost and returned to the
factory defaults. It is recommended that a
nastavitve uporabnika ter vse vrednosti vrne v privzeto
reset is performed only when serious
stanje.
problems are experienced.
Ob izbrani postavki Reset pritisnite gumb ENTER/OK.
Prikae se sporoilo Enter PIN.
S tevilskimi gumbi (09) vnesite trenutno 4-mestno
Return
kodo PIN. Prikae se opozorilno sporoilo. Vse vrednosti
ponastavite z izmeninim pritiskanjem barvnih gumbov
(rdeega, zelenega, rumenega in modrega).
Privzeta koda PIN novega televizorja je 0-0-0-0.
Ko spremenite kodo PIN za otroko kljuavnico, se
spremeni tudi koda za ponastavitev.
Po dokonani ponastavitvi se zaene funkcija DTV Plug
& Play (DTV Auto Store, Time Zone odvisno od drave, Time Setting), pri emer izklopi
nain digitalnega TV, vendar ne preklopi v analogni nain. (Oglejte si stran 11.)
Slovenina - 45
BN68-01743A-00Sln.indd
45
2008-8-13
11:13:14
Kaj je Anynet+?
Anynet+ je AV-omreni sistem, ki uporabnikom omogoa preprosto uporabo AV-vmesnika, saj
lahko vse prikljuene AV-naprave upravljajo v meniju Anynet+, ko so prikljuene AV-naprave
Samsung Electronics.
TV
Kabel HDMI
Naprava 2 v
sistemu Anynet+
Kabel HDMI
Naprava 3 v
sistemu Anynet+
Kabel HDMI
TV
Naprava 1 v
sistemu Anynet+
Naprava 2 v
sistemu Anynet+
2
Kabel HDMI
Domai kino
Kabel HDMI
Kabel HDMI
Naprava 3 v
sistemu Anynet+
Kabel HDMI
Optini kabel
Audio Out (Optical)] na TV in digitalni avdio vhod na sprejemniku poveite samo z optinim
[Digital
kablom.
Poveite samo en sprejemnik.
zvonikov domaega kina lahko posluate 5.1-kanalni zvok. V drugih primerih lahko namre
Prek
posluate samo 2-kanalski zvok. Digital Audio IN (Optical) na domaem kinu pravilno poveite s TV,
da boste televizijski zvok lahko posluali prek domaega kina. Vendar zvoka BD-predvajalnika, ki
v domai kino potuje prek TV po 5.1-kanalnem zvoku, ne morete posluati, ker TV oddaja samo 2kanalni stereo zvok. e elite dodatne informacije o domaem kinu, si oglejte prironik.
Napravo v sistemu Anynet+ lahko poveete s kablom HDMI. Nekateri kabli HDMI morda ne podpirajo
funkcij sistema Anynet+.
Anynet+ deluje, ko je z njim zdruljiva AV-naprava v stanju pripravljenosti ali pa vklopljena.
Anynet+ skupno podpira najve 8 AV-naprav.
Slovenina - 46
BN68-01743A-00Sln.indd
46
2008-8-13
11:13:15
TV
P1
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver
:Off
Setup
Move
Exit
Enter
Setup
Anynet+ (HDMI-CEC)
: OffOff
: OffOn
Searching Connections
Move
Enter
Return
Setup
Anynet+ (HDMI-CEC)
: On
: Off
Off
On
Enter
Return
elite uporabiti funkcijo sistema Anynet+, naj bo nastavitev Select Device (Izbira naprave) za
e
televizijski daljinski upravljalnik nastavljena na TV.
nastavite funkcijo Auto Turn Off (Samodejni izklop) na On, se bodo ob izklopu TV izklopile tudi
e
povezane zunanje naprave. Vendar e naprava snema, se morda ne bo izklopila.
TV
P1
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver
:Off
Setup
Move
Return
DVDR1
DVDR2
DVD1
DVD2
Enter
Setup
Anynet+ (HDMI-CEC)
: On
povezanih naprav.
Ko je iskanje naprav konano, tevilo najdenih naprav ni
Move
Enter
Return
prikazano.
eprav TV samodejno poie naprave, ko ga vklopite z gumbom POWER, naprave, ki so povezane
ob vklopljenem TV ali ob doloeni situaciji, niso prikazane na seznamu naprav. e torej elite poiskati
naprave, izberite Searching Connections.
e ste nain zunanjega vhoda izbrali z gumbom SOURCE, ne morete uporabiti funkcije sistema
Anynet+. Zato na napravo v sistemu Anynet+ preklopite z gumbom Anynet+.
Slovenina - 47
BN68-01743A-00Sln.indd
47
2008-8-13
11:13:16
Meni Anynet+
Vsebina menija Anynet+ je odvisna od vrste in stanja naprav v sistemu Anynet+, ki so povezane s TV.
Meni Anynet+
Opis
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver
Setup
Stanje delovanja
Gumbi na voljo
Po preklopu na napravo, ko
se na zaslonu prikae meni
ustrezne naprave.
tevilski gumbi
////Gumbi ENTER
Barvni gumbi
Gumb EXIT
Po preklopu na napravo,
medtem ko se predvaja
datoteka.
(Previjanje nazaj)
(Previjanje naprej)
(Ustavi)
(Predvajanje/premor)
Naprava z vgrajenim
kanalnikom
Po preklopu na napravo, ko
gledate TV-program.
Gumb CH /
Avdio naprava
Ko je sprejemnik aktiviran.
Slovenina - 48
BN68-01743A-00Sln.indd
48
2008-8-13
11:13:16
Select Device
Pritisnite gumb ali , da izberete Receiver, nato pritisnite gumb
Record
ENTER/OK.
2 Pritisnite gumb ali , da izberete On, nato pritisnite gumb
Menu on Device
ENTER/OK. Zvok lahko posluate prek sprejemnika.
Device Operation
Setup
prek 2-kanalskega sprejemnika.
Move
Enter
Exit
e je sprejemnik namenjen samo za domai kino (podpira
samo avdio), morda ne bo prikazan na seznamu naprav.
Sprejemnik deluje samo, e ste optino vtinico na TV in sprejemnik pravilno povezali.
Posluanje avtorsko zaitene vsebine prek sprejemnika bo morda moteno.
Ko zvok posluate prek sprejemnika, je uporaba menija PIP in menija za zvok omejena.
Kontrolni seznam, ki ga preglejte, preden se obrnete na servis
Teava
Reitev
Anynet+ ne deluje.
Preverite, ali je naprava zdruljiva s sistemom Anynet+. Sistem Anynet+ podpira samo
naprave, ki so zdruljive s tem sistemom.
Poveite samo en sprejemnik.
Preverite, ali je napajalni kabel naprave v sistemu Anynet+ pravilno nameen.
Preverite povezave naprave v sistemu Anynet+ s kablom video/avdio/HDMI.
Preverite, ali je v meniju nastavitve sistema Anynet+ monost Anynet+ (HDMI-CEC)
nastavljena na On (Vklop).
Preverite, ali je daljinski upravljalnik televizorja nastavljen na nain TV.
Preverite, ali daljinski upravljalnik podpira sistema Anynet+.
V doloenih razmerah Anynet+ ne deluje (iskanje kanalov).
Ko povezujete ali odstranjujete kabel HDMI, ponovno poiite naprave ali ponovno
vklopite TV.
Preverite, ali je funkcija Anynet+ naprave v sistemu Anynet+ vklopljena.
Preverite, ali sta naprava v sistemu Anynet+ in TV pravilno povezana in ali je vklopljena
funkcija Anynet+ (HDMI-CEC) v meniju za nastavitev sistema Anynet+.
e elite preklopiti na TV, na televizijskem daljinskem upravljalniku pritisnite gumb TV.
Nato pritisnite gumb Anynet+ in prikae se meni Anynet+, kjer izberete eleno monost.
V meniju Anynet+ izberite View TV (Gledanje TV).
Na televizijskem daljinskem upravljalniku pritisnite gumb SOURCE in izberite napravo, ki
ni v sistemu Anynet+.
Pritisnite CH, CH LIST, PRE-CH, ali podobno za preklop na nain TV. (Upotevajte, da
gumb za kanale deluje samo, e naprava v sistemu Anynet+, ki je vdelana v kanalnik, ni
povezana.)
Med konfiguriranjem sistema Anynet+ ali preklapljanjem na nain gledanja ne morete
uporabiti daljinskega upravljalnika.
Daljinski upravljalnik lahko uporabite, potem ko nastavite sistem Anynet+ ali preklopite na
nain gledanja.
BN68-01743A-00Sln.indd
49
2008-8-13
11:13:16
1 TV/DTV
Izhod iz teleteksta (odvisno od modela)
2
(kazalo)
Za izpis vsebine indeksa ob pregledovanju teleteksta.
3
6
7
8
9
0
!
(teletekst vklopljen/meano)
Pritisnite, da boste aktivirali teletekst, potem ko ste izbrali kanal,
ki omogoa storitev teleteksta. Pritisnite dvakrat, da teletekst
prekrijete s trenutnim zaslonom.
(velikost)
Pritisnite za prikaz rk dvojne velikosti v zgornji polovici zaslona.
Za spodnjo polovico zaslona pritisnite e enkrat.
Za prikaz obiajnega zaslona pritisnite e enkrat.
(nain)
Pritisnite za izbiro naina teleteksta (LIST/FLOF).
e ga pritisnete v nainu LIST, bo preklopil v nain List save.
V nainu List save lahko z gumbom
(shrani) shranite stran
teleteksta na seznam.
(podstran)
Za prikaz podstrani, ki je na voljo.
(stran gor)
Za prikaz naslednje strani teleteksta.
(stran dol)
Za prikaz prejnje strani teleteksta.
(preklii)
Za prikaz oddaje med iskanjem strani.
(razkrij)
Uporabite za odkrivanje skritega besedila (na primer odgovori na
vpraanja iz kviza). Za prikaz obiajnega zaslona pritisnite e enkrat.
Barvni gumbi (rdei/zeleni/rumeni/modri)
e televizijska postaja uporablja sistem FASTEXT, so razline teme na strani teleteksta oznaene
z razlinimi barvami, izberete pa jih lahko s pritiskom na obarvane gumbe. Pritisnite na enega od
njih, odvisno pa od zahtevanega. Prikae se stran z ostalimi obarvanimi informacijami, ki jih lahko
izberete na isti nain.
Za prikaz prejnje ali naslednje strani pritisnite ustrezni barvni gumb.
(zadri)
Uporabite zato, da boste zadrali prikazano stran, e je izbrana
stran povezana z ve drugimi stranmi, ki sledijo samodejno. Za
nadaljevanje gumb ponovno pritisnite.
(shrani)
Uporabite za shranjevanje strani teleteksta.
se nadaljuje
Slovenina - 50
BN68-01743A-00Sln.indd
50
2008-8-13
11:13:18
Vsebina
A
B
C
D
E
F
1
2
Opremo za pritrditev na steno namestite z vrtilnim momentom 15 kgf/cm ali manj. e je vrtilni
moment izven doloenega razpona, lahko pokodujete dele izdelka.
V kompletu dodatne opreme je dralo obro [], s katerim lahko na televizor Samsung namestite
opremo za pritrditev na steno drugega proizvajalca. (Primer B)
Slovenina - 51
BN68-01743A-00Sln.indd
51
2008-8-13
11:13:20
Druina izdelkov
LCD-TV
PDP-TV
Palci
Spec. VESA (A * B)
Standardni vijak
23 ~ 26
200 * 100
M4
32 ~ 40
200 * 200
M6
46 ~ 52
600 * 400
57
700 * 400
(Ni VESA)
57 ~ 70
800 * 400
80 ~
1400 * 800
42 ~ 50
600 * 400
55 ~ 70
800 * 400
63
Ni VESA
80 ~
1400 * 800
Koliina
4
M8
4
M8
6
4
BN68-01743A-00Sln.indd
52
2008-8-13
11:13:20
se nadaljuje
Slovenina - 53
BN68-01743A-00Sln.indd
53
2008-8-13
11:13:21
se nadaljuje
Slovenina - 54
BN68-01743A-00Sln.indd
54
2008-8-13
11:13:23
VIDEOREKORDER
Znamka
SAMSUNG
ADMIRAL
AIWA
AKAI
AUDIO DYNAMICS
BELL&HOWELL
BROKSONIC
CANDLE
CANON
CITIZEN
COLORTYME
CRAIG
CURTIS MATHES
DAEWOO
DB
DIMENSIA
DYNATECH
ELECTROHOME
EMERSON
FISHER
FUNAI
GENERAL ELECTRIC
GO VIDEO
LG(Goldstar)
HARMAN KARDON
HITACHI
INSTANT REPLAY
JC PENNEY
JCL
KENWOOD
KLH
LIOYD
LOGIK
LXI
JVC
MAGNAVOX
MARANTZ
MARTA
KONIA
ORION
MEI
MEMOREX
MGA
MIDLAND
MINOLTA
Koda
000 001 002 003 004 005 077 078 079
020
025
004 027 032
007 026
018
022
002 003 006 008 015 055
021 056
002 003 006 008 015 055
007
002 024
002 007 008 017 021 025 056 064 066
003 010 011 012 013 014 015 016
007 026
017
025
034
001 003 006 021 022 025 030 032 034
040 047 050 052 060 063 065 066 067
069 073
018 024 028 029 048 051 061
025
002 005 017 021 056
002
006 007 008 009 010
007
019 025 041 042 074
021
002 007 018 019 021 026 037 041
054 056
007 008 018 021 026 037
007 008 018 026 037
070
025
038
025
081 082 083
021 056 059
007 008 018 021 026 037 062
006
036
073 074 075 076
021
006 021 024 025
034
005
019 041 075
Znamka
MITSUBISHI
MONTGOMERY WARD
MTC
MULTITECH
NEC
OPTIMUS
PANASONIC
PENTAX
PENTEX RESEARCH+
PHILCO
PHILIPS
PIONEER
PORTLAND
PROSCAN
QUARTZ
QUASAR
RADIO SHACK/
REALISTIC
RCA
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHIMTOM
SIGNATURE
SONY
SYLVANIA
SYMPHONIC
TANDY
TASHIKA
TATUNG
TEAC
TECHNICS
TEKNIKA
TMK
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
YAMAHA
ZENITH
Koda
019 034 041 046
020
002 025
002 005 025 038
007 008 018 026 037 062 064
020
021 056 071 072
019 041 075
008
021 056 059
021 080
019 026 039 053
015 049 055
017
018
021 056
006 018 020 021 024 025 029 034
048 056
002 017 019 021 035 041 043 057
068 076
026
018 024
003 047 052 067
006 018 019 024 028 029 041 048 051
020 034 045 015
027 033 038 058
025
027 033 044
021 025 056 059
025
018 025
006
037
025 037 068
021
006 021 025 031
066
003 019 029 051 052
002 006
002
007 026
026
007 026
002
002 003 006 019 020 021 024 025 034
038 041
007 008 018 026 037
023 027 033
se nadaljuje
Slovenina - 55
BN68-01743A-00Sln.indd
55
2008-8-13
11:13:23
KABELSKI SPREJEMNIK
Znamka
SAMSUNG
GI
HAMLIN
HITACHI
JERROLD
MACOM
MAGNAVOX
OAK
PANASONIC
PHILIPS
PIONEER
RCA
REGAL
Koda
000 001 002 003 004 005 006 007
041
003 024 031
025 030
038 039
025 030
019 023 028
026
003 022 027 037 044
019 021 023 028
004 018 020 044
014 022 040
003
Znamka
REGENCY
SA
SCIENTIFIC ATLAN
SPRUCER
STARGATE 2000
SYLVANIA
TEXSCAN
TOCOM
UNIVERSAL
VIEWSTAR
WARNER AMEX
ZENITH
Koda
015 023
042 043
042 043
022
036
016
016
032
033 034
019 021 023 028
046
017 029 035 037 045
SPREJEMNIK SAMSUNG
Izdelek
Ground wave STB
CABLE STB
Satellite STB
Koda
000 001 002 008 013
000 004 008 013
000 003 008 013
SPREJEMNIK
Znamka
ALPHASTAR
ANAM
CHANNEL MASTER
CROSSDIGITAL
CHAPARRAL
DIRECT TV
DAEWOO
DISH NETWORK SYSTEM
DISHPRO
DRAKE
DX ANTENNA
ECHOSTAR
EXPRESSVU
GOI
GE
GENERAL INSTRUMENT
HTS
HOME CABLE
HITACHI
HUGHES NETWORK
IQ
IQ PRISM
JANEIL
JERROID
JVC
Koda
023
043
018 034
019
035
015 016 017 019 022 045 060
061 062 065 066 067 068
074
069 070
069
018 024 032
027
025 069 070 071
069
069
065
046 047 048 063 064
069
056
022
015 017
020
020
059
063
069 070
Znamka
LG(Goldstar)
MAGNAVOX
MEMOREX
MOTOROLA
MACOM
MITSUBISHI
NEXT LEVEL
PHILIPS
PRIMESTAR
PANASONIC
PAYSAT
PROSCAN
RCA
RADIOSHACK
REALISTIC
STS
STAR TRAK
SKY
SKY LIFE
SHACK
STAR CHOICE
SONY
TOSHIBA
ULTIMATE TV
UNIDEN
ZENITH
Koda
044 073
016 021 036 038 039 040 041 042
016
064
018
015
047 048 064
015 016 017 021 033 036 038 039
040 041 042 067
046 049 050 063
058 059 061 062
016
065 066
051 052 053 065 066
064
057
020 027
026
031
005 006 007
064
064
054 060
015 017 028 029 030 072
060 066
016 021 037 055 056 057
024 031 068
se nadaljuje
Slovenina - 56
BN68-01743A-00Sln.indd
56
2008-8-13
11:13:23
DVD-PREDVAJALNIK SAMSUNG
Izdelek
DVD-PREDVAJALNIK
DVDR
BD Record
VCR COMBO
VCR Record
DHR COMBO
Koda
000 001 002
003 004
005 006
007 008 009 010 011
012
013
Izdelek
Domai kino VCR COMBO
HDD-snemalnik COMBO
TWIN TRAY COMBO
STB DVD COMBO
DVD-sprejemnik
AV-sprejemnik
Koda
014 015 016
017
018
019
020
021
DVD-PREDVAJALNIK
Znamka
ANAM
AUDIOVOX
AUDIOLOGIC
ANABA
APEX DIGITAL
AIWA
BROKSONIC
BLAUPUNKT
B&K
CURTIS MATHES
CYBER HOME
CLARION
CIRRUS
CINEVISION
DAEWOO
DENON
FARENHEIT
FISHER
GPX
GO VIDEO
GE
GREENHILL
HITACHI
HITEKER
HOYO
HARMAN / KARDON
IRT
INTEGRA
JBL
JVC
JATON
KENWOOD
KISS
KONKA
KLH
LG(Goldstar)
LOEWE
LASONIC
MOBILE AUTHORITY
MEMOREX
MALATA
MAGNAVOX
MINTEK
MONYKA
Koda
030
075
085
072
070 071 074 086 083 084 088
111 112
114
062
074
122 123
027
065 077 078 079 082
080 125
081
095
066
146
067 068
090
060
061 089 133 135
069 074
074
064 113
071
073
091 110
089
092
091
022 033 115 116
073
051 108 109
073
059 100 106 107
074 075
025 031
057
058
054
055
056
076 093
074 094
073
Znamka
NORCENT
NEXT BASE
NEC
NANTAUS
NESA
OPTOMEDIA ELECTRONICS
OPTIVIEW
ONKYO
PHILCO
PRINCETON
PROSCAN
PANASONIC
PHILIPS
ROTEL
RIO
RCA
RAITE
ROWA
SAMPO
SONY
SHERWOOD
SVA
SYLVANIA
SHARP
SANSUI
SANYO
SHINSONIC
SANYO
THOMSON
TOSHIBA
TECHNICS
TVIEW
TOKAI
TEAC
TECHWOOD
TREDEX
URBAN CONCEPTS
VENTURER
VOCOPRO
YAMAHA
YAMAKAWA
XWAVE
ZENITH
Koda
048 049 050
052
053
144
074
105
072
076 092 119
044 045
046 047
023
024 034 124 134 136 137 138
036 076
117 118
120
023 035 074 075 131 132
073
038
104
026 029 126 127 128 129
130 141
039 041
042
043 093
140
062
062
094
090
145
028 062 076
139
072
073
096
097
098 099 101
076
075
102
032 063
040 073
103
076 121
Slovenina - 57
BN68-01743A-00Sln.indd
57
2008-8-13
11:13:24
Opozorilo
Stojalo mora biti dobro pritrjeno na
televizor, preden ga premaknete,
ker lahko pade in povzroi resno
pokodbo.
Priporoljivo je, da ve oseb nosi
zaslon PDP. Televizorja nikoli
ne postavite tako, da je zaslon
obrnjen navzdol, ker lahko tako
pokodujete zaslon.
Vedno ga shranite v pokonnem
poloaju.
Odpravljanje teav
Preden se obrnete na Samsungovo poprodajno slubo, preverite naslednje.
e teave ne morete odpraviti s pomojo spodnjih navodil, si zabeleite tevilko modela in
serijsko tevilko televizorja in se obrnite na lokalnega trgovca.
Ni zvoka ali slike
Preverite, ali je napajalni kabel prikljuen v stensko vtinico.
Preverite, ali ste pritisnili gumb za vklop//izklop na sprednji ploi ali gumb POWER na daljinskem
upravljalniku.
Preverite nastavitev kontrasta in svetlosti slike.
Preverite glasnost.
Preverite, ali je funkcija Internal Mute nastavljena na ON.
Slika je normalna, vendar ni zvoka
Preverite glasnost.
Preverite, ali ste pritisnili gumb MUTE na daljinskem upravljalniku.
Ni slike oziroma slika je rno-bela
Prilagodite barvne nastavitve.
Preverite, ali je izbran ustrezen oddajni sistem.
Zvone in slikovne motnje
Odkrijte, katera elektrina naprava moti delovanje televizorja, nato poveajte razdaljo med njima.
Televizor vkljuite v drugo stensko vtinico.
Nejasna ali sneena slika, popaen zvok
Preverite usmerjenost, lokacijo in povezavo antene.
Do teh motenj pogosto pride zaradi uporabe sobne antene.
Nepravilno delovanje daljinskega upravljalnika
Zamenjajte baterije daljinskega upravljalnika.
Oistite zgornji rob daljinskega upravljalnika (oddajno okno).
Preverite, ali sta konca baterije + in - prav vstavljena.
Preverite, ali sta bateriji prazni.
Zaslon je rn in luka indikatorja napajanja neprekinjeno utripa
Na raunalniku preverite napajanje, signalni kabel.
TV uporablja njen sistem za upravljanje porabe.
Premaknite miko raunalnika ali pritisnite katerokoli tipko na tipkovnici.
Na opremi (sprejemnik, DVD-predvajalnik itd.) preverite napajanje, signalni kabel.
TV uporablja njen sistem za upravljanje porabe.
Na ploi ali daljinskem upravljalniku pritisnite gumb Source.
Izklopite in vklopite televizor.
V kotu zaslona se prikae pokodovana slika.
e je v nekaterih zunanjih napravah izbrano Just Scan, se lahko v kotu zaslona prikae
pokodovana slika. To teavo povzroajo zunanje naprave in ne TV.
Slovenina - 58
BN68-01743A-00Sln.indd
58
2008-8-13
11:13:26
Specifikacije
Opisi in znailnosti v tej knjiici so zgolj informativne narave in se lahko spremenijo brez
predhodnega obvestila.
Ime modela
PS42A417
42 palcev
Loljivost PC-ja
Izhod zvoka
10 W x 2
Dimenzije ( x V x G)
Osrednji del
S stojalom
1055 x 700 x 95 mm
1055 x 759 x 316 mm
Tea
Osrednji del
S stojalom
Okoljski vidiki
Delovna temperatura
Delovna vlanost
Temperatura shranjevanja
Vlanost pri shranjevanju
31 kg
34 kg
10 C do 40 C (50F do 104F)
10 % do 80 %, brez kondenzacije
-20 C do 45 C (-4F do 113 F)
5 % do 95 %, brez kondenzacije
Slovenina - 59
BN68-01743A-00Sln.indd
59
2008-8-13
11:13:28
BN68-01743A-00Sln.indd
60
2008-8-13
11:13:28