Documente Academic
Documente Profesional
Documente Cultură
MIB Reference
SAOS 6.11 MIB Set 4.11
Whats inside...
Introduction
WWP-LEOS-BLADE-MIB
WWP-LEOS-PORT-MIB
WWP-LEOS-BROADCASTCONTAINMENT-MIB
WWP-LEOS-PORT-STATS-MIB
BRIDGE-MIB
WWP-LEOS-CFM-MIB
WWP-LEOS-PORT-XCVR-MIB
CIENA-CES-ACL-MIB
WWP-LEOS-CHASSIS-MIB
WWP-LEOS-RADIUS-CLIENT-MIB
CIENA-CES-BFD-MIB
WWP-LEOS-COMMUNITY-MIB
WWP-LEOS-RAPS-MIB
CIENA-CES-DHCPV6-CLIENT-MIB
WWP-LEOS-DATAPLANE-MIB
WWP-LEOS-RMON-MIB
CIENA-CES-LDP-MIB
WWP-LEOS-DHCP-CLIENT-MIB
WWP-LEOS-RSTP-MIB
CIENA-CES-MGMT-INTERFACE-MIB
WWP-LEOS-DNS-CLIENT-MIB
WWP-LEOS-RSVPTE-MIB
CIENA-CES-MPLS-MIB
WWP-LEOS-EXT-LAG-MIB
WWP-LEOS-SSH-MIB
CIENA-CES-OSPF-MIB
WWP-LEOS-FEATURE-LICENSE-MIB
WWP-LEOS-SW-XGRADE-MIB
CIENA-CES-PM
WWP-LEOS-FILE-TRANSFER-MIB
WWP-LEOS-SYSLOG-COLLECTOR-MIB
CIENA-CES-RSVPTE-MIB
WWP-LEOS-FILTER-MIB
WWP-LEOS-SYSTEM-CONFIG-MIB
CIENA-CES-TIME-SYNC-MIB
WWP-LEOS-FLOW-MIB
WWP-LEOS-SYSTEM-CONTROL-MIB
CIENA-CES-VLLI-MIB
WWP-LEOS-INFORM-STATUS-MIB
WWP-LEOS-TABLE-CHG-NOTIF-MIB
CIENA-GLOBAL-MIB
WWP-LEOS-IP-INTERFACE-MIB
WWP-LEOS-TACACS-CLIENT-MIB
CIENA-SMI
WWP-LEOS-LDP-MIB
WWP-LEOS-TRAFFIC-PROFILE-MIB
CIENA-TC
WWP-LEOS-MPLS-OAM-MIB
WWP-LEOS-TWAMP-MIB
IEEE8023-LAG-MIB
WWP-LEOS-MSTP-MIB
WWP-LEOS-USER-MIB
RSTP-MIB
WWP-LEOS-MULTICAST-FILTER-MIB
WWP-LEOS-VLAN-TAG-MIB
WWP-EXT-BRIDGE-MIB
WWP-LEOS-NTP-CLIENT-MIB
WWP-LEOS-VPLS-MIB
WWP-EXT-BRIDGE-TRAP-MIB
WWP-LEOS-OAM-MIB
WWP-PRODUCTS-MIB
WWP-LEOS-8021X-MIB
WWP-LEOS-PBT-MIB
WWP-SMI
WWP-LEOS-BENCHMARK-MIB
WWP-LEOS-PING-MIB
Statistics
LEGAL NOTICES
THIS DOCUMENT CONTAINS CONFIDENTIAL AND TRADE SECRET INFORMATION OF CIENA
CORPORATION AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE
OR DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE, OR SELL ANYTHING THAT IT MAY DESCRIBE.
REPRODUCTION, DISCLOSURE, OR USE IN WHOLE OR IN PART WITHOUT THE SPECIFIC WRITTEN
AUTHORIZATION OF CIENA CORPORATION IS STRICTLY FORBIDDEN.
EVERY EFFORT HAS BEEN MADE TO ENSURE THAT THE INFORMATION IN THIS DOCUMENT IS
COMPLETE AND ACCURATE AT THE TIME OF PUBLISHING; HOWEVER, THE INFORMATION CONTAINED IN
THIS DOCUMENT IS SUBJECT TO CHANGE.
While the information in this document is believed to be accurate and reliable, except as otherwise expressly agreed
to in writing CIENA PROVIDES THIS DOCUMENT AS IS WITHOUT WARRANTY OR CONDITION OF ANY
KIND, EITHER EXPRESS OR IMPLIED. The information and/or products described in this document are subject to
change without notice.
Copyright 2013 Ciena Corporation. All Rights Reserved
The material contained in this document is also protected by copyright laws of the United States of America and
other countries. It may not be reproduced or distributed in any form by any means, altered in any fashion, or stored
in a data base or retrieval system, without express written permission of the Ciena Corporation.
Security
Ciena cannot be responsible for unauthorized use of equipment and will not make allowance or credit for
unauthorized use or access.
Contacting Ciena
Corporate Headquarters
410-694-5700 or 800-921-1144
www.ciena.com
1-800-CIENA24 (243-6224)
410-865-4961
800-CIENA-24-7 (800-2436-2247)
In Asia-Pacific
800-CIENA-24-7 (800-2436-2247)
+81-3-6367-3989
+44-207-012-5508
+91-124-4340-600
In Caribbean and Latin
America
Sales and General Information
800-CIENA-24-7 (800-2436-2247)
410-865-4944 (USA)
410-694-5700
E-mail: sales@ciena.com
In North America
410-694-5700 or 800-207-3714
E-mail: sales@ciena.com
In Europe
+44-207-012-5500 (UK)
E-mail: sales@ciena.com
In Asia
+81-3-3248-4680 (Japan)
E-mail: sales@ciena.com
In India
+91-124-434-0500
E-mail: sales@ciena.com
In Latin America
Training
877-CIENA-TD (243-6283)
or 410-865-8996
E-mail: techtng@ciena.com
For additional office locations and phone numbers, please visit the Ciena web site at www.ciena.com.
MIB Reference
009-3220-011 Standard Revision A
August 2013
MIB Reference
009-3220-011 Standard Revision A
August 2013
7. Limitation of Liability. ANY LIABILITY OF Ciena SHALL BE LIMITED IN THE AGGREGATE TO THE
AMOUNTS PAID BY YOU FOR THE SOFTWARE. THIS LIMITATION APPLIES TO ALL CAUSES OF ACTION,
INCLUDING WITHOUT LIMITATION BREACH OF CONTRACT, BREACH OF WARRANTY, NEGLIGENCE,
STRICT LIABILITY, MISREPRESENTATION AND OTHER TORTS. THE LIMITATIONS OF LIABILITY DESCRIBED
IN THIS SECTION ALSO APPLY TO ANY THIRD-PARTY SUPPLIER OF Ciena. NEITHER Ciena NOR ANY OF
ITS THIRD-PARTY SUPPLIERS SHALL BE LIABLE FOR ANY INJURY, LOSS OR DAMAGE, WHETHER
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL INCLUDING WITHOUT LIMITATION ANY LOST
PROFITS, CONTRACTS, DATA OR PROGRAMS, AND THE COST OF RECOVERING SUCH DATA OR
PROGRAMS, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES IN ADVANCE
8. General. Ciena may assign this Agreement to any Ciena affiliate or to a purchaser of the intellectual property
rights in the Software, but otherwise neither this Agreement nor any rights hereunder may be assigned nor duties
delegated by either party, and any attempt to do so will be void. This Agreement shall be governed by the laws of
the State of Maryland (without regard to the conflict of laws provisions) and shall be enforceable in the courts of
Maryland. The U.N. Convention on Contracts for the International Sale of Goods shall not apply hereto. This
Agreement constitutes the complete and exclusive statement of agreement between the parties relating to the
license for the Software and supersedes all proposals, communications, purchase orders, and prior agreements,
verbal or written, between the parties. If any portion hereof is found to be void or unenforceable, the remaining
provisions shall remain in full force and effect.
MIB Reference
009-3220-011 Standard Revision A
August 2013
Publication history
August 2013
Revision A Standard
First Standard release of this document
MIB Reference
009-3220-011 Standard Revision A
August 2013
vi Publication history
MIB Reference
009-3220-011 Standard Revision A
August 2013
vii
Contents
xvii
Introduction
1-1
Overview 1-1
Configuring SNMP Communication 1-1
Retrieving Information 1-1
2-1
Overview 2-1
Standard MIBs 2-1
Standard Notifications 2-3
Ciena Proprietary MIBs 2-4
MIB Loading Sequence 2-8
BRIDGE-MIB
3-1
CIENA-CES-ACL-MIB
4-1
CIENA-CES-BFD-MIB
5-1
CIENA-CES-DHCPV6-CLIENT-MIB
6-1
CIENA-CES-LDP-MIB
7-1
MIB Reference
009-3220-011 Standard Revision A
August 2013
viii Contents
Notifications 7-4
CIENA-CES-MGMT-INTERFACE-MIB
8-1
CIENA-CES-MPLS-MIB
9-1
CIENA-CES-OSPF-MIB
10-1
CIENA-CES-RSVPTE-MIB
12-1
CIENA-CES-TIME-SYNC-MIB
13-1
CIENA-CES-VLLI-MIB
14-1
CIENA-GLOBAL-MIB
15-1
CIENA-SMI
16-1
CIENA-TC
17-1
IEEE8023-LAG-MIB
18-1
MIB Reference
009-3220-011 Standard Revision A
August 2013
Contents ix
Object Definitions 18-1
Notifications 18-15
RSTP-MIB
19-1
WWP-EXT-BRIDGE-MIB
20-1
WWP-EXT-BRIDGE-TRAP-MIB
21-1
WWP-LEOS-8021X-MIB
22-1
WWP-LEOS-BENCHMARK-MIB
23-1
WWP-LEOS-BLADE-MIB
24-1
WWP-LEOS-BROADCAST-CONTAINMENT-MIB
25-1
WWP-LEOS-CFM-MIB
26-1
MIB Reference
009-3220-011 Standard Revision A
August 2013
x Contents
wwpLeosCfmFaultTrapSet 26-175
wwpLeosCfmFaultTrapClear 26-175
wwpLeosCfmDmmTrap 26-175
wwpLeosCfmLmmTrap 26-176
wwpLeosCfmExtFrameLossFarFaultTrap 26-176
wwpLeosCfmExtFaultTrapSet 26-176
wwpLeosCfmExtFaultTrapClear 26-177
wwpLeosCfmBadSequenceFaultTrap 26-177
wwpLeosCfmBlockOppositeMEPSetTrap 26-177
wwpLeosCfmBlockOppositeMEPClearTrap 26-177
wwpLeosCfmExtSynLossSessionNearFaultTrap 26-178
wwpLeosCfmExtSynLossSessionFarFaultTrap 26-178
WWP-LEOS-CHASSIS-MIB
27-1
WWP-LEOS-COMMUNITY-MIB
28-1
WWP-LEOS-DATAPLANE-MIB
29-1
WWP-LEOS-DHCP-CLIENT-MIB
30-1
WWP-LEOS-DNS-CLIENT-MIB
31-1
MIB Reference
009-3220-011 Standard Revision A
August 2013
Contents xi
Notifications 31-4
WWP-LEOS-EXT-LAG-MIB
32-1
WWP-LEOS-FEATURE-LICENSE-MIB
33-1
WWP-LEOS-FILE-TRANSFER-MIB
34-1
WWP-LEOS-FILTER-MIB
35-1
WWP-LEOS-FLOW-MIB
36-1
WWP-LEOS-INFORM-STATUS-MIB
37-1
WWP-LEOS-IP-INTERFACE-MIB
38-1
WWP-LEOS-LDP-MIB
39-1
WWP-LEOS-MPLS-OAM-MIB
40-1
MIB Reference
009-3220-011 Standard Revision A
August 2013
xii Contents
Notifications 40-10
WWP-LEOS-MSTP-MIB
41-1
WWP-LEOS-MULTICAST-FILTER-MIB
42-1
WWP-LEOS-NTP-CLIENT-MIB
43-1
WWP-LEOS-OAM-MIB
44-1
WWP-LEOS-PBT-MIB
45-1
WWP-LEOS-PING-MIB
46-1
WWP-LEOS-PORT-MIB
47-1
MIB Reference
009-3220-011 Standard Revision A
August 2013
Contents xiii
wwpLeosEthLinkUp 47-17
wwpLeosEthLinkDown 47-18
wwpLeosEthAdminSpeedIncompatible 47-18
wwpLeosEthLinkFlap 47-18
wwpLeosAggLinkUpDown 47-19
WWP-LEOS-PORT-STATS-MIB
48-1
WWP-LEOS-PORT-XCVR-MIB
49-1
WWP-LEOS-RADIUS-CLIENT-MIB
50-1
WWP-LEOS-RAPS-MIB
51-1
MIB Reference
009-3220-011 Standard Revision A
August 2013
xiv Contents
wwpLeosRapsAlarm 51-12
WWP-LEOS-RMON-MIB
52-1
WWP-LEOS-RSTP-MIB
53-1
WWP-LEOS-RSVPTE-MIB
54-1
WWP-LEOS-SSH-MIB
55-1
WWP-LEOS-SW-XGRADE-MIB
56-1
WWP-LEOS-SYSLOG-COLLECTOR-MIB
57-1
WWP-LEOS-SYSTEM-CONFIG-MIB
58-1
MIB Reference
009-3220-011 Standard Revision A
August 2013
Contents xv
wwpLeosSystemMemoryUtilizationStatusTrap 58-26
wwpLeosSystemFileSystemUtilizationTmpStatusTrap 58-27
wwpLeosSystemFileSystemUtilizationSysfsStatusTrap 58-27
wwpLeosSystemFileSystemUtilizationXftpStatusTrap 58-27
WWP-LEOS-SYSTEM-CONTROL-MIB
59-1
WWP-LEOS-TABLE-CHG-NOTIF-MIB
60-1
WWP-LEOS-TACACS-CLIENT-MIB
61-1
WWP-LEOS-TRAFFIC-PROFILE-MIB
62-1
WWP-LEOS-TWAMP-MIB
63-1
WWP-LEOS-USER-MIB
64-1
WWP-LEOS-VLAN-TAG-MIB
65-1
WWP-LEOS-VPLS-MIB
66-1
WWP-PRODUCTS-MIB
67-1
WWP-SMI
68-1
Statistics
69-1
MIB Reference
009-3220-011 Standard Revision A
August 2013
xvi Contents
MIB Reference
009-3220-011 Standard Revision A
August 2013
xvii
Trademark Acknowledgements
Ciena is a trademark of Ciena Corporation.
Intended Audience
This document is intended for certified system installation technicians, test
engineers, and technical support technicians responsible for SAOS system
software configuration. All SAOS personnel are required to read, understand,
and observe the safety precautions described in the appropriate product
manuals.
It assumes that the intended user(s) possess basic knowledge of, but not
limited to:
Ethernet Concepts
MIB Reference
009-3220-011 Standard Revision A
August 2013
The latest online version of this document and all release notes can be
accessed on the Ciena web site at http://www.ciena.com.
Related Documentation
Related documents are given in the following list. Additional supporting
documents are available through the Ciena web site at http://www.ciena.com.
3911 and UAM Service Delivery Switch 3911 UNI Access Module
Installation Manual
MIB Reference
009-3220-011 Standard Revision A
August 2013
Document Comments
Ciena appreciates all comments that help us to improve our documentation
quality. The user can submit comments through the Ciena web site at http://
www.ciena.com.
MIB Reference
009-3220-011 Standard Revision A
August 2013
MIB Reference
009-3220-011 Standard Revision A
August 2013
1-1
Introduction
1-
Overview
This MIB Reference Manual provides an overview of the Simple Network
Management Protocol (SNMP) Management Information Base (MIB) objects
used to monitor switches using an SNMP element or network management
platform.
Note: This MIB set is intended for multiple platforms, and may contain
MIB module, object, trap, and notification definitions not applicable to the
platform with which you are working.
Retrieving Information
To optimize performance when retrieving large table views while browsing
MIBs, use SNMP v2 Get Bulk instead of SNMP Get.
MIB Reference
009-3220-011 Standard Revision A
August 2013
1-2 Introduction
MIB Reference
009-3220-011 Standard Revision A
August 2013
2-1
2-
Overview
The system software supports both standard and proprietary MIBs that store
configuration, operational state, and statistical information in the form of
managed objects. Each managed object is identified by an Object Identifier
(OID) and exchanges information between the MIB and the system software
modules through an Application Programming Interface (API).
Standard MIBs
Note 1: This manual documents the Ciena Proprietary MIBs in this set.
Standard MIBs are not documented in this manual.
Note 2: Not all MIB files or associated objects and notifications included
in this MIB set are supported in the system software.
Standard MIB files included in this MIB set include:
DIFFSERV-DSCP-TC.my
DIFFSERV-MIB.my
DS1-MIB.my
ETHERLIKE-MIB.my
HC-PerfHist-TC-MIB.my
HCNUM-TC.my
IANA-ADDRESS-FAMILY-NUMBERS-MIB.my
IANA-PWE3-MIB.my
IANAifType-MIB.my
MIB Reference
009-3220-011 Standard Revision A
August 2013
IEEE-PAE-MIB.my
IEEE8021-PAE-MIB.my
IF-MIB.my
INET-ADDRESS-MIB.my
INTEGRATED-SERVICES-MIB.my
ISIS-MIB.my
LLDP-MIB.my
LLDP_DOT1-MIB.my
LLDP_DOT3-MIB.my
MPLS-LDP-STD-MIB.my
MPLS-LSR-STD-MIB.my
MPLS-TC-STD-MIB.my
MPLS-TE-STD-MIB.my
OSPF-MIB.my
P-BRIDGE-MIB.my
PerfHist-TC-MIB.my
PW-MPLS-STD-MIB.my
PW-STD-MIB.my
PW-TC-STD-MIB.my
RFC-1212.my
RFC-1215.my
RFC1155-SMI.my
RFC1213-MIB.my
RFC1215-TRAP.my
RMON-MIB.my
RMON2-MIB.my
SNMP-COMMUNITY-MIB.my
SNMP-FRAMEWORK-MIB.my
SNMP-MPD-MIB.my
SNMP-NOTIFICATION-MIB.my
SNMP-TARGET-MIB.my
SNMP-USER-BASED-SM-MIB.my
MIB Reference
009-3220-011 Standard Revision A
August 2013
SNMP-VIEW-BASED-ACM-MIB.my
SNMPv2-CONF.my
SNMPv2-MIB.my
SNMPv2-SMI.my
SNMPv2-TC.my
SNMPv2-TM.my
TOKEN-RING-RMON-MIB.my
TRANSPORT-ADDRESS-MIB.my
Standard Notifications
Supported standard notifications are as follows:
linkDown
linkup
coldStart
authenticationFailure
risingAlarm
fallingAlarm
llpdRemTablesChange
topologyChange
MIB Reference
009-3220-011 Standard Revision A
August 2013
Supported platform
Release Introduced
BRIDGE-MIB.my
6.2 or earlier
CIENA-CES-ACL-MIB.my
6.10
CIENA-CES-BFD-MIB.my
6.10
CIENA-CES-DHCPV6-CLIENT-MIB.my
6.10.2
CIENA-CES-LDP-MIB.my
6.9
6.10
CIENA-CES-MPLS-MIB.my
6.9
CIENA-CES-OSPF-MIB.my
6.9
CIENA-CES-PM-MIB-.my
3932
6.11
CIENA-CES-RSVPTE-MIB.my
6.9
CIENA-CES-VLLI-MIB.my
6.10
CIENA-CES-TIME-SYNC-MIB.my
CIENA-GLOBAL-MIB.my
6.9
CIENA-SMI.my
6.9
CIENA-TC.my
6.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
Supported platform
Release Introduced
IEEE8023-LAG-MIB.my
6.4
RSTP-MIB.my
6.2 or earlier
WWP-EXT-BRIDGE-MIB.my
6.2 or earlier
WWP-EXT-BRIDGE-TRAP-MIB.my
6.2 or earlier
WWP-LEOS-8021X-MIB.my
6.4
WWP-LEOS-BENCHMARK-MIB.my
6.8
WWP-LEOS-BLADE-MIB.my
6.2 or earlier
WWP-LEOS-BROADCASTCONTAINMENT-MIB.my
6.2 or earlier
WWP-LEOS-CFM-MIB.my
6.2 or earlier
WWP-LEOS-CHASSIS-MIB.my
6.2 or earlier
WWP-LEOS-COMMUNITY-MIB.my
6.2 or earlier
WWP-LEOS-DATAPLANE-MIB.my
6.4
WWP-LEOS-DHCP-CLIENT-MIB.my
6.2 or earlier
WWP-LEOS-DNS-CLIENT-MIB.my
6.2 or earlier
MIB Reference
009-3220-011 Standard Revision A
August 2013
Supported platform
Release Introduced
WWP-LEOS-EXT-LAG-MIB.my
6.4
WWP-LEOS-FEATURE-LICENSEMIB.my
6.2 or earlier
WWP-LEOS-FILE-TRANSFER-MIB.my
6.2 or earlier
WWP-LEOS-FILTER-MIB.my
WWP-LEOS-FLOW-MIB.my
6.2 or earlier
WWP-LEOS-INFORM-STATUS-MIB.my
6.8
WWP-LEOS-IP-INTERFACE-MIB.my
6.2 or earlier
WWP-LEOS-LDP-MIB.my
6.2 or earlier
WWP-LEOS-MPLS-OAM-MIB.my
6.2 or earlier
WWP-LEOS-MSTP-MIB.my
6.3
WWP-LEOS-MULTICAST-FILTERMIB.my
6.2 or earlier
WWP-LEOS-NTP-CLIENT-MIB.my
6.2 or earlier
WWP-LEOS-OAM-MIB.my
6.2 or earlier
WWP-LEOS-PBT-MIB.my
6.2 or earlier
WWP-LEOS-PING-MIB.my
6.2 or earlier
MIB Reference
009-3220-011 Standard Revision A
August 2013
Supported platform
Release Introduced
WWP-LEOS-PORT-MIB.my
6.2 or earlier
WWP-LEOS-PORT-STATS-MIB.my
6.2 or earlier
WWP-LEOS-PORT-XCVR-MIB.my
6.2 or earlier
WWP-LEOS-RADIUS-CLIENT-MIB.my
6.3
WWP-LEOS-RAPS-MIB.my
6.8
WWP-LEOS-RMON-MIB.my
6.2 or earlier
WWP-LEOS-RSTP-MIB.my
6.2 or earlier
WWP-LEOS-RSVPTE-MIB.my
6.2 or earlier
WWP-LEOS-SSH-MIB.my
6.2 or earlier
WWP-LEOS-SW-XGRADE-MIB.my
6.2 or earlier
WWP-LEOS-SYSLOG-COLLECTORMIB.my
6.2 or earlier
WWP-LEOS-SYSTEM-CONFIG-MIB.my
6.2 or earlier
WWP-LEOS-SYSTEM-CONTROLMIB.my
6.2 or earlier
6.2 or earlier
MIB Reference
009-3220-011 Standard Revision A
August 2013
Supported platform
Release Introduced
WWP-LEOS-TACACS-CLIENT-MIB.my
6.3
6.2 or earlier
WWP-LEOS-TWAMP-MIB.my
6.3
WWP-LEOS-USER-MIB.my
6.2 or earlier
WWP-LEOS-VLAN-TAG-MIB.my
6.2 or earlier
WWP-LEOS-VPLS-MIB.my
6.2 or earlier
WWP-PRODUCTS-MIB.my
6.2 or earlier
WWP-SMI.my
6.2 or earlier
1.
SNMPv2-SMI.my
2.
SNMPv2-TC.my
3.
INET-ADDRESS-MIB.my
4.
SNMPv2-CONF.my
5.
MPLS-TC-STD-MIB.my
6.
OSPF-MIB.my
MIB Reference
009-3220-011 Standard Revision A
August 2013
7.
INTEGRATED-SERVICES-MIB.my
8.
DIFFSERV-DSCP-TC.my
9.
IF-MIB.my
10.
DIFFSERV-MIB.my
11.
DS1-MIB.my
12.
ETHERLIKE-MIB.my
13.
HC-PerfHist-TC-MIB.my
14.
HCNUM-TC.my
15.
IANA-PWE3-MIB.my
16.
IANA-ADDRESS-FAMILY-NUMBERS-MIB.my
17.
IANAifType-MIB.my
18.
SNMP-FRAMEWORK-MIB.my
19.
IEEE-PAE-MIB.my
20.
IEEE8021-PAE-MIB.my
21.
SNMP-USER-BASED-SM-MIB.my
22.
ISIS-MIB.my
23.
RMON-MIB.my
24.
TOKEN-RING-RMON-MIB.my
25.
RMON2-MIB.my
26.
LLDP-MIB.my
27.
RFC1155-SMI.my
28.
RFC-1212.my
29.
RFC1213-MIB.my
30.
RFC-1215.my
31.
BRIDGE-MIB.my
32.
P-BRIDGE-MIB.my
33.
Q-BRIDGE-MIB.my
MIB Reference
009-3220-011 Standard Revision A
August 2013
34.
LLDP_DOT1-MIB.my
35.
LLDP_DOT3-MIB.my
36.
MPLS-LSR-STD-MIB.my
37.
MPLS-LDP-STD-MIB.my
38.
MPLS-TE-STD-MIB.my
39.
PW-TC-STD-MIB.my
40.
PerfHist-TC-MIB.my
41.
PW-STD-MIB.my
42.
PW-MPLS-STD-MIB.my
43.
RFC1215-TRAP.my
44.
SNMP-TARGET-MIB.my
45.
SNMP-COMMUNITY-MIB.my
46.
SNMP-MPD-MIB.my
47.
SNMP-NOTIFICATION-MIB.my
48.
SNMP-VIEW-BASED-ACM-MIB.my
49.
SNMPv2-MIB.my
50.
SNMPv2-TM.my
51.
TRANSPORT-ADDRESS-MIB.my
52.
IEEE8023-LAG-MIB.my
53.
RSTP-MIB.my
54.
WWP-SMI.my
55.
WWP-EXT-BRIDGE-MIB.my
56.
WWP-EXT-BRIDGE-TRAP-MIB.my
57.
WWP-LEOS-BENCHMARK-MIB.my
58.
WWP-LEOS-8021X-MIB.my
59.
WWP-LEOS-COMMUNITY-MIB.my
60.
WWP-LEOS-BLADE-MIB.my
MIB Reference
009-3220-011 Standard Revision A
August 2013
61.
WWP-LEOS-CFM-MIB.my
62.
WWP-LEOS-BROADCAST-CONTAINMENT-MIB.my
63.
WWP-LEOS-CHASSIS-MIB.my
64.
WWP-LEOS-DATAPLANE-MIB.my
65.
WWP-LEOS-DHCP-CLIENT-MIB.my
66.
WWP-LEOS-DNS-CLIENT-MIB.my
67.
WWP-LEOS-EXT-LAG-MIB.my
68.
WWP-LEOS-FEATURE-LICENSE-MIB.my
69.
WWP-LEOS-FILE-TRANSFER-MIB.my
70.
WWP-LEOS-FILTER-MIB.my
71.
WWP-LEOS-FLOW-MIB.my
72.
WWP-LEOS-INFORM-STATUS-MIB.my
73.
WWP-LEOS-IP-INTERFACE-MIB.my
74.
WWP-LEOS-LDP-MIB.my
75.
WWP-LEOS-MPLS-OAM-MIB.my
76.
WWP-LEOS-MSTP-MIB.my
77.
WWP-LEOS-MULTICAST-FILTER-MIB.my
78.
WWP-LEOS-NTP-CLIENT-MIB.my
79.
WWP-LEOS-PORT-MIB.my
80.
WWP-LEOS-OAM-MIB.my
81.
WWP-LEOS-VPLS-MIB.my
82.
WWP-LEOS-PBT-MIB.my
83.
WWP-LEOS-PING-MIB.my
84.
WWP-LEOS-PORT-STATS-MIB.my
85.
WWP-LEOS-PORT-XCVR-MIB.my
86.
WWP-LEOS-RADIUS-CLIENT-MIB.my
87.
WWP-LEOS-RAPS-MIB.my
MIB Reference
009-3220-011 Standard Revision A
August 2013
88.
WWP-LEOS-RMON-MIB.my
89.
WWP-LEOS-RSTP-MIB.my
90.
WWP-LEOS-RSVPTE-MIB.my
91.
WWP-LEOS-SSH-MIB.my
92.
WWP-LEOS-SW-XGRADE-MIB.my
93.
WWP-LEOS-SYSLOG-COLLECTOR-MIB.my
94.
WWP-LEOS-SYSTEM-CONFIG-MIB.my
95.
WWP-LEOS-SYSTEM-CONTROL-MIB.my
96.
WWP-LEOS-TABLE-CHG-NOTIF-MIB.my
97.
WWP-LEOS-TACACS-CLIENT-MIB.my
98.
WWP-LEOS-TRAFFIC-PROFILE-MIB.my
99.
WWP-LEOS-TWAMP-MIB.my
100.
WWP-LEOS-USER-MIB.my
101.
WWP-LEOS-VLAN-TAG-MIB.my
102.
WWP-PRODUCTS-MIB.my
103.
CIENA-TC.my
104.
CIENA-SMI.my
105.
CIENA-CES-DHCPV6-CLIENT-MIB.my
106.
CIENA-CES-ACL-MIB.my
107.
CIENA-GLOBAL-MIB.my
108.
CIENA-CES-BFD-MIB.my
109.
CIENA-CES-MGMT-INTERFACE-MIB.my
110.
CIENA-CES-LDP-MIB.my
111.
CIENA-CES-TIME-SYNC-MIB.my
112.
CIENA-CES-MPLS-MIB.my
113.
CIENA-CES-OSPF-MIB.my
MIB Reference
009-3220-011 Standard Revision A
August 2013
114.
CIENA-CES-PM-MIB.my
115.
CIENA-CES-RSVPTE-MIB.my
116.
CIENA-CES-VLLI-MIB.my
MIB Reference
009-3220-011 Standard Revision A
August 2013
MIB Reference
009-3220-011 Standard Revision A
August 2013
3-1
BRIDGE-MIB
1-
This chapter provides the object definitions and notifications for the BRIDGEMIB module.
Object Definitions
This section provides the name, description, status, and access for the
objects.
dot1dBaseBridgeAddress
Description and OID
Status
The MAC address used by this bridge when it must be referred to in a unique mandatory
fashion. It is recommended that this be the numerically smallest MAC address
of all ports that belong to this bridge. However it is only required to be unique.
When concatenated with dot1dStpPriority a unique BridgeIdentifier is formed
which is used in the Spanning Tree Protocol.
Access
read-only
1.3.6.1.2.1.17.1.1
dot1dBaseNumPorts
Description and OID
Status
Access
mandatory
read-only
Status
Access
1.3.6.1.2.1.17.1.2
dot1dBaseType
Description and OID
Indicates what type of bridging this bridge can perform. If a bridge is actually mandatory
performing a certain type of bridging this will be indicated by entries in the port
table for the given type.
read-only
1.3.6.1.2.1.17.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
3-2 BRIDGE-MIB
dot1dBasePortTable
Description and OID
Status
Access
A table that contains generic information about every port that is associated
with this bridge. Transparent, source-route, and srt ports are included.
mandatory
not-accessible
Status
Access
mandatory
not-accessible
Status
Access
1.3.6.1.2.1.17.1.4
dot1dBasePortEntry
1.3.6.1.2.1.17.1.4.1
dot1dBasePort
Description and OID
The port number of the port for which this entry contains bridge management mandatory
information.
read-only
1.3.6.1.2.1.17.1.4.1.1
dot1dBasePortIfIndex
Description and OID
Status
Access
The value of the instance of the ifIndex object, defined in MIB-II, for the
interface corresponding to this port.
mandatory
read-only
Status
Access
1.3.6.1.2.1.17.1.4.1.2
dot1dBasePortCircuit
Description and OID
For a port which (potentially) has the same value of dot1dBasePortIfIndex as mandatory
another port on the same bridge, this object contains the name of an object
instance unique to this port. For example, in the case where multiple ports
correspond one- to-one with multiple X.25 virtual circuits, this value might
identify an (e.g., the first) object instance associated with the X.25 virtual circuit
corresponding to this port. For a port which has a unique value of
dot1dBasePortIfIndex, this object can have the value { 0 0 }.
read-only
1.3.6.1.2.1.17.1.4.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
BRIDGE-MIB 3-3
dot1dBasePortDelayExceededDiscards
Description and OID
Status
Access
The number of frames discarded by this port due to excessive transit delay
through the bridge. It is incremented by both transparent and source route
bridges.
mandatory
read-only
Status
Access
mandatory
read-only
Status
Access
1.3.6.1.2.1.17.1.4.1.4
dot1dBasePortMtuExceededDiscards
1.3.6.1.2.1.17.1.4.1.5
dot1dStpProtocolSpecification
Description and OID
An indication of what version of the Spanning Tree Protocol is being run. The mandatory
value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree
protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future
versions of the IEEE Spanning Tree Protocol are released that are
incompatible with the current version a new value will be defined.
read-only
1.3.6.1.2.1.17.2.1
dot1dStpPriority
Description and OID
Status
The value of the write-able portion of the Bridge ID, i.e., the first two octets of mandatory
the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given
by the value of dot1dBaseBridgeAddress.
Access
read-write
1.3.6.1.2.1.17.2.2
dot1dStpTimeSinceTopologyChange
Description and OID
Status
The time (in hundredths of a second) since the last time a topology change was mandatory
detected by the bridge entity.
Access
read-only
1.3.6.1.2.1.17.2.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
3-4 BRIDGE-MIB
dot1dStpTopChanges
Description and OID
Status
Access
The total number of topology changes detected by this bridge since the
management entity was last reset or initialized.
mandatory
read-only
Status
Access
The bridge identifier of the root of the spanning tree as determined by the
Spanning Tree Protocol as executed by this node. This value is used as the
Root Identifier parameter in all Configuration Bridge PDUs originated by this
node.
mandatory
read-only
Status
Access
The cost of the path to the root as seen from this bridge.
mandatory
read-only
Status
Access
1.3.6.1.2.1.17.2.4
dot1dStpDesignatedRoot
1.3.6.1.2.1.17.2.5
dot1dStpRootCost
1.3.6.1.2.1.17.2.6
dot1dStpRootPort
Description and OID
The port number of the port which offers the lowest cost path from this bridge mandatory
to the root bridge.
read-only
1.3.6.1.2.1.17.2.7
dot1dStpMaxAge
Description and OID
Status
Access
The maximum age of Spanning Tree Protocol information learned from the
network on any port before it is discarded, in units of hundredths of a second.
This is the actual value that this bridge is currently using.
mandatory
read-only
1.3.6.1.2.1.17.2.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
BRIDGE-MIB 3-5
dot1dStpHelloTime
Description and OID
Status
The amount of time between the transmission of Configuration bridge PDUs by mandatory
this node on any port when it is the root of the spanning tree or trying to
become so, in units of hundredths of a second. This is the actual value that this
bridge is currently using.
Access
read-only
1.3.6.1.2.1.17.2.9
dot1dStpHoldTime
Description and OID
Status
This time value determines the interval length during which no more than two mandatory
Configuration bridge PDUs shall be transmitted by this node, in units of
hundredths of a second.
Access
read-only
1.3.6.1.2.1.17.2.10
dot1dStpForwardDelay
Description and OID
Status
This time value, measured in units of hundredths of a second, controls how fast mandatory
a port changes its spanning state when moving towards the Forwarding state.
The value determines how long the port stays in each of the Listening and
Learning states, which precede the Forwarding state. This value is also used,
when a topology change has been detected and is underway, to age all
dynamic entries in the Forwarding Database. [Note that this value is the one
that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay
which is the value that this bridge and all others would start using if/when this
bridge were to become the root.]
Access
read-only
1.3.6.1.2.1.17.2.11
dot1dStpBridgeMaxAge
Description and OID
Status
mandatory
The value that all bridges use for MaxAge when this bridge is acting as the
root. Note that 802.1D-1990 specifies that the range for this parameter is
related to the value of dot1dStpBridgeHelloTime. The granularity of this timer
is specified by 802.1D-1990 to be 1 second. An agent may return a badValue
error if a set is attempted to a value which is not a whole number of seconds.
Access
read-write
1.3.6.1.2.1.17.2.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
3-6 BRIDGE-MIB
dot1dStpBridgeHelloTime
Description and OID
Status
The value that all bridges use for HelloTime when this bridge is acting as the mandatory
root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second.
An agent may return a badValue error if a set is attempted to a value which is
not a whole number of seconds.
Access
read-write
1.3.6.1.2.1.17.2.13
dot1dStpBridgeForwardDelay
Description and OID
Status
The value that all bridges use for ForwardDelay when this bridge is acting as mandatory
the root. Note that 802.1D-1990 specifies that the range for this parameter is
related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is
specified by 802.1D-1990 to be 1 second. An agent may return a badValue
error if a set is attempted to a value which is not a whole number of seconds.
Access
read-write
1.3.6.1.2.1.17.2.14
dot1dStpPortTable
Description and OID
Status
A table that contains port-specific information for the Spanning Tree Protocol. mandatory
Access
not-accessible
1.3.6.1.2.1.17.2.15
dot1dStpPortEntry
Description and OID
Status
A list of information maintained by every port about the Spanning Tree Protocol mandatory
state for that port.
Access
not-accessible
1.3.6.1.2.1.17.2.15.1
dot1dStpPort
Description and OID
Status
Access
The port number of the port for which this entry contains Spanning Tree
Protocol management information.
mandatory
read-only
1.3.6.1.2.1.17.2.15.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
BRIDGE-MIB 3-7
dot1dStpPortPriority
Description and OID
Status
mandatory
The value of the priority field which is contained in the first (in network byte
order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given
by the value of dot1dStpPort.
Access
read-write
1.3.6.1.2.1.17.2.15.1.2
dot1dStpPortState
Description and OID
Status
mandatory
The port's current state as defined by application of the Spanning Tree
Protocol. This state controls what action a port takes on reception of a frame.
If the bridge has detected a port that is malfunctioning it will place that port into
the broken(6) state. For ports which are disabled (see dot1dStpPortEnable),
this object will have a value of disabled(1).
Access
read-only
1.3.6.1.2.1.17.2.15.1.3
dot1dStpPortEnable
Description and OID
Status
Access
mandatory
read-write
Status
Access
1.3.6.1.2.1.17.2.15.1.4
dot1dStpPortPathCost
Description and OID
The contribution of this port to the path cost of paths towards the spanning tree mandatory
root which include this port. 802.1D-1998 recommends that the default value
of this parameter be in inverse proportion to the speed of the attached LAN.
New implementations should support dot1dStpPortPathCost32. If the port
path costs exceeds the maximum value of this object then this object should
report the maximum value, namely 65535. Applications should try to read the
dot1dStpPortPathCost32 object if this object reports the maximum value.
read-write
1.3.6.1.2.1.17.2.15.1.5
dot1dStpPortDesignatedRoot
Description and OID
Status
mandatory
The unique Bridge Identifier of the Bridge recorded as the Root in the
Configuration BPDUs transmitted by the Designated Bridge for the segment to
which the port is attached.
Access
read-only
1.3.6.1.2.1.17.2.15.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
3-8 BRIDGE-MIB
dot1dStpPortDesignatedCost
Description and OID
Status
Access
The path cost of the Designated Port of the segment connected to this port.
This value is compared to the Root Path Cost field in received bridge PDUs.
mandatory
read-only
Status
Access
The Bridge Identifier of the bridge which this port considers to be the
Designated Bridge for this port's segment.
mandatory
read-only
Status
Access
1.3.6.1.2.1.17.2.15.1.7
dot1dStpPortDesignatedBridge
1.3.6.1.2.1.17.2.15.1.8
dot1dStpPortDesignatedPort
Description and OID
The Port Identifier of the port on the Designated Bridge for this port's segment. mandatory
read-only
1.3.6.1.2.1.17.2.15.1.9
dot1dStpPortForwardTransitions
Description and OID
Status
Access
The number of times this port has transitioned from the Learning state to the
Forwarding state.
mandatory
read-only
Status
Access
1.3.6.1.2.1.17.2.15.1.10
dot1dTpLearnedEntryDiscards
Description and OID
The total number of Forwarding Database entries, which have been or would mandatory
have been learned, but have been discarded due to a lack of space to store
them in the Forwarding Database. If this counter is increasing, it indicates that
the Forwarding Database is regularly becoming full (a condition which has
unpleasant performance effects on the subnetwork). If this counter has a
significant value but is not presently increasing, it indicates that the problem
has been occurring but is not persistent.
read-only
1.3.6.1.2.1.17.4.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
BRIDGE-MIB 3-9
dot1dTpAgingTime
Description and OID
Status
Access
The timeout period in seconds for aging out dynamically learned forwarding
information. 802.1D-1990 recommends a default of 300 seconds.
mandatory
read-write
Status
Access
1.3.6.1.2.1.17.4.2
dot1dTpFdbTable
Description and OID
A table that contains information about unicast entries for which the bridge has mandatory
forwarding and/or filtering information. This information is used by the
transparent bridging function in determining how to propagate a received
frame.
not-accessible
1.3.6.1.2.1.17.4.3
dot1dTpFdbEntry
Description and OID
Status
Access
Information about a specific unicast MAC address for which the bridge has
some forwarding and/or filtering information.
mandatory
not-accessible
Status
Access
A unicast MAC address for which the bridge has forwarding and/or filtering
information.
mandatory
read-only
Status
Access
1.3.6.1.2.1.17.4.3.1
dot1dTpFdbAddress
1.3.6.1.2.1.17.4.3.1.1
dot1dTpFdbPort
Description and OID
Either the value '0', or the port number of the port on which a frame having a mandatory
source address equal to the value of the corresponding instance of
dot1dTpFdbAddress has been seen. A value of '0' indicates that the port
number has not been learned but that the bridge does have some forwarding/
filtering information about this address (e.g. in the dot1dStaticTable).
Implementors are encouraged to assign the port value to this object whenever
it is learned even for addresses for which the corresponding value of
dot1dTpFdbStatus is not learned(3).
read-only
1.3.6.1.2.1.17.4.3.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
3-10 BRIDGE-MIB
dot1dTpFdbStatus
Description and OID
Status
The status of this entry. The meanings of the values are: other(1) : none of the mandatory
following. This would include the case where some other MIB object (not the
corresponding instance of dot1dTpFdbPort, nor an entry in the
dot1dStaticTable) is being used to determine if and how frames addressed to
the value of the corresponding instance of dot1dTpFdbAddress are being
forwarded. invalid(2) : this entry is not longer valid (e.g., it was learned but has
since aged-out), but has not yet been flushed from the table. learned(3) : the
value of the corresponding instance of dot1dTpFdbPort was learned, and is
being used. self(4) : the value of the corresponding instance of
dot1dTpFdbAddress represents one of the bridge's addresses. The
corresponding instance of dot1dTpFdbPort indicates which of the bridge's
ports has this address. mgmt(5) : the value of the corresponding instance of
dot1dTpFdbAddress is also the value of an existing instance of
dot1dStaticAddress.
Access
read-only
1.3.6.1.2.1.17.4.3.1.3
dot1dTpPortTable
Description and OID
Status
Access
A table that contains information about every port that is associated with this
transparent bridge.
mandatory
not-accessible
Status
Access
mandatory
not-accessible
Status
Access
1.3.6.1.2.1.17.4.4
dot1dTpPortEntry
1.3.6.1.2.1.17.4.4.1
dot1dTpPort
Description and OID
The port number of the port for which this entry contains Transparent bridging mandatory
management information.
read-only
1.3.6.1.2.1.17.4.4.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
BRIDGE-MIB 3-11
dot1dTpPortMaxInfo
Description and OID
Status
Access
The maximum size of the INFO (non-MAC) field that this port will receive or
transmit.
mandatory
read-only
Status
Access
1.3.6.1.2.1.17.4.4.1.2
dot1dTpPortInFrames
Description and OID
The number of frames that have been received by this port from its segment. mandatory
Note that a frame received on the interface corresponding to this port is only
counted by this object if and only if it is for a protocol being processed by the
local bridging function, including bridge management frames.
read-only
1.3.6.1.2.1.17.4.4.1.3
dot1dTpPortOutFrames
Description and OID
Status
The number of frames that have been transmitted by this port to its segment. mandatory
Note that a frame transmitted on the interface corresponding to this port is only
counted by this object if and only if it is for a protocol being processed by the
local bridging function, including bridge management frames.
Access
read-only
1.3.6.1.2.1.17.4.4.1.4
dot1dTpPortInDiscards
Description and OID
Status
Access
Count of valid frames received which were discarded (i.e., filtered) by the
Forwarding Process.
mandatory
read-only
1.3.6.1.2.1.17.4.4.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
3-12 BRIDGE-MIB
dot1dStaticTable
Description and OID
Status
A table containing filtering information configured into the bridge by (local or mandatory
network) management specifying the set of ports to which frames received
from specific ports and containing specific destination addresses are allowed
to be forwarded. The value of zero in this table as the port number from which
frames with a specific destination address are received, is used to specify all
ports for which there is no specific entry in this table for that particular
destination address. Entries are valid for unicast and for group/broadcast
addresses.
Access
not-accessible
1.3.6.1.2.1.17.5.1
dot1dStaticEntry
Description and OID
Status
Access
mandatory
not-accessible
Status
Access
mandatory
read-write
Status
Access
1.3.6.1.2.1.17.5.1.1
dot1dStaticAddress
1.3.6.1.2.1.17.5.1.1.1
dot1dStaticReceivePort
Description and OID
Either the value '0', or the port number of the port from which a frame must be mandatory
received in order for this entry's filtering information to apply. A value of zero
indicates that this entry applies on all ports of the bridge for which there is no
other applicable entry.
read-write
1.3.6.1.2.1.17.5.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
BRIDGE-MIB 3-13
dot1dStaticAllowedToGoTo
Description and OID
Status
The set of ports to which frames received from a specific port and destined for mandatory
a specific MAC address, are allowed to be forwarded. Each octet within the
value of this object specifies a set of eight ports, with the first octet specifying
ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within
each octet, the most significant bit represents the lowest numbered port, and
the least significant bit represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the value of this object. If that
bit has a value of '1' then that port is included in the set of ports; the port is not
included if its bit has a value of '0'. (Note that the setting of the bit
corresponding to the port from which a frame is received is irrelevant.) The
default value of this object is a string of ones of appropriate length.
Access
read-write
1.3.6.1.2.1.17.5.1.1.3
dot1dStaticStatus
Description and OID
Status
This object indicates the status of this entry. The default value is permanent(3). mandatory
other(1) - this entry is currently in use but the conditions under which it will
remain so are different from each of the following values. invalid(2) - writing
this value to the object removes the corresponding entry. permanent(3) - this
entry is currently in use and will remain so after the next reset of the bridge.
deleteOnReset(4) - this entry is currently in use and will remain so until the next
reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will
remain so until it is aged out.
Access
read-write
1.3.6.1.2.1.17.5.1.1.4
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
newRoot
The newRoot trap indicates that the sending agent has become the new root
of the Spanning Tree; the trap is sent by a bridge soon after its election as the
new root, e.g., upon expiration of the Topology Change Timer immediately
subsequent to its election. Implementation of this trap is optional.
topologyChange
A topologyChange trap is sent by a bridge when any of its configured ports
transitions from the Learning state to the Forwarding state, or from the
Forwarding state to the Blocking state. The trap is not sent if a newRoot trap
is sent for the same transition. Implementation of this trap is optional.
MIB Reference
009-3220-011 Standard Revision A
August 2013
4-1
CIENA-CES-ACL-MIB
1-
This chapter provides the object definitions and notifications for the CIENACES-ACL-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
cienaCesAclAdminState
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
This object indicates the number of lookups that failed because the source ip current
address did not match a table entry.
read-only
1.3.6.1.4.1.1271.2.1.25.1.1.1
cienaCesAclCacheHit
1.3.6.1.4.1.1271.2.1.25.1.1.2
cienaCesAclNoHit
Description and OID
1.3.6.1.4.1.1271.2.1.25.1.1.3
cienaCesAclBadPort
Description and OID
Status
Access
This object indicates the number of lookups that failed because the ingress
port was disallowed by a table entry.
current
read-only
1.3.6.1.4.1.1271.2.1.25.1.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
4-2 CIENA-CES-ACL-MIB
cienaCesAclBadDscp
Description and OID
Status
Access
This object indicates the number of lookups that failed because the ingress
DSCP value was disallowed by a table entry.
current
read-only
Status
Access
This object indicates the current operational state of the IP ACL system.
current
read-only
Status
Access
This object indicates the number of IP ACL rules that are currently configured. current
read-only
1.3.6.1.4.1.1271.2.1.25.1.1.5
cienaCesAclOperState
1.3.6.1.4.1.1271.2.1.25.1.1.6
cienaCesAclInUseEntries
Description and OID
1.3.6.1.4.1.1271.2.1.25.1.1.7
cienaCesAclMaxEntries
Description and OID
Status
Access
This object indicates the maximum number of IP ACL rules that can be
configured.
current
read-only
Status
Access
This object indicates the number of lookups that failed because protocol didn't current
match protocol allowed for matching src/dst subnet
read-only
1.3.6.1.4.1.1271.2.1.25.1.1.8
cienaCesAclBadProtocol
Description and OID
1.3.6.1.4.1.1271.2.1.25.1.1.9
cienaCesAclTable
Description and OID
Status
Access
The (conceptual) table listing the parameters for the IP ACL table.
deprecated
not-accessible
1.3.6.1.4.1.1271.2.1.25.1.2.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-ACL-MIB 4-3
cienaCesAclEntry
Description and OID
Status
Access
deprecated
not-accessible
Status
Access
This object indicates the IP network type which will be authorized. This OID
specifies the Inet address type of the OIDs cienaCesAclEntryInetAddr and
cienaCesAclEntryInetPrefixLength. When representing: ipv4 :
cienaCesAclEntryInetAddr should be compliant with InetAddressIPv4 from
RFC 4001 ipv6 : cienaCesAclEntryInetAddr should be compliant with
InetAddressIPv6 from RFC 4001
deprecated
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.1.25.1.2.1.1
cienaCesAclEntryInetAddrType
1.3.6.1.4.1.1271.2.1.25.1.2.1.1.1
cienaCesAclEntryInetAddr
Description and OID
This object indicates the source IP network address that will be authorized. deprecated
This OID should be used in conjunction with cienaCesAclEntryInetAddrType
and should be compliant with RFC 4001 InetAddressType.
read-only
1.3.6.1.4.1.1271.2.1.25.1.2.1.1.2
cienaCesAclEntryInetPrefixLength
Description and OID
Status
Access
This object indicates the prefix length for the source IP network that will be
authorized. This OID should be used in conjunction with
cienaCesAclEntryInetAddrType.
deprecated
not-accessible
Status
Access
This object indicates the number of lookups that matched the table entry.
deprecated
read-only
1.3.6.1.4.1.1271.2.1.25.1.2.1.1.3
cienaCesAclEntryHits
1.3.6.1.4.1.1271.2.1.25.1.2.1.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
4-4 CIENA-CES-ACL-MIB
cienaCesAclEntryBadPort
Description and OID
Status
Access
This object indicates the number of lookups that failed because the ingress
port was disallowed by the table entry.
deprecated
read-only
Status
Access
This object indicates the DSCP values for which IP packets are allowed to
ingress. The mask is big endian and each bit, numbered from 0 to 63,
represents a DSCP value numbered from 0 to 63. A value of
0xFFFFFFFFFFFFFFFF may be used to specify all.
deprecated
read-only
Status
Access
This object indicates the number of lookups that failed because the ingress
DSCP value was disallowed by the table entry.
deprecated
read-only
Status
Access
This object indicates the physical ports on which frames will be allowed to
ingress from. The mask is big endian and each bit, numbered from 0 to 63,
represents a physical port numbered from 1 to 64. A value of
0xFFFFFFFFFFFFFFFF may be used to specify all ports.
deprecated
read-only
Status
Access
1.3.6.1.4.1.1271.2.1.25.1.2.1.1.5
cienaCesAclEntryDscpMask
1.3.6.1.4.1.1271.2.1.25.1.2.1.1.6
cienaCesAclEntryBadDscp
1.3.6.1.4.1.1271.2.1.25.1.2.1.1.7
cienaCesAclEntryPortBitMask
1.3.6.1.4.1.1271.2.1.25.1.2.1.1.8
cienaCesAclEntryNotifInetAddrType
Description and OID
This object indicates the IP network type which will be authorized. This OID deprecated
specifies the Inet address type of the OIDs cienaCesAclEntryNotifInetAddr and
cienaCesAclEntryNotifInetPrefixLength. When representing: ipv4 :
cienaCesAclEntryInetAddr should be compliant with InetAddressIPv4 from
RFC 4001 ipv6 : cienaCesAclEntryInetAddr should be compliant with
InetAddressIPv6 from RFC 4001
read-only
1.3.6.1.4.1.1271.2.1.25.1.2.1.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-ACL-MIB 4-5
cienaCesAclEntryNotifInetAddr
Description and OID
Status
This object indicates the IP network address that will be authorized. This OID deprecated
should be used in conjunction with cienaCesAclEntryNotifInetAddrType and
should be compliant with RFC 4001 InetAddressType.
Access
read-only
1.3.6.1.4.1.1271.2.1.25.1.2.1.1.10
cienaCesAclEntryNotifInetPrefixLength
Description and OID
Status
This object indicates the prefix length for the IP network that will be authorized. deprecated
This OID should be used in conjunction with
cienaCesAclEntryNotifInetAddrType.
Access
read-only
1.3.6.1.4.1.1271.2.1.25.1.2.1.1.11
cienaCesExtAclTable
Description and OID
Status
The (conceptual) table listing the parameters for the extended IP ACL table. current
Access
not-accessible
1.3.6.1.4.1.1271.2.1.25.1.2.2
cienaCesExtAclEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.1.25.1.2.2.1
cienaCesExtAclEntrySrcInetAddrType
Description and OID
This object indicates the IP network type which will be authorized. This OID current
specifies the Inet address type of the OIDs cienaCesExtAclEntrySrcInetAddr
and cienaCesExtAclEntrySrcInetPrefixLen. When representing: ipv4 :
cienaCesExtAclEntrySrcInetAddr should be compliant with InetAddressIPv4
from RFC 4001 ipv6 : cienaCesExtAclEntrySrcInetAddr should be compliant
with InetAddressIPv6 from RFC 4001
not-accessible
1.3.6.1.4.1.1271.2.1.25.1.2.2.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
4-6 CIENA-CES-ACL-MIB
cienaCesExtAclEntrySrcInetAddr
Description and OID
Status
Access
This object indicates the source IP network address that will be authorized.
This OID should be used in conjunction with
cienaCesExtAclEntrySrcInetAddrType and should be compliant with RFC
4001 InetAddressType.
current
not-accessible
Status
Access
This object indicates the prefix length for the source IP network that will be
authorized. This OID should be used in conjunction with
cienaCesExtAclEntrySrcInetAddrType.
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.1.25.1.2.2.1.2
cienaCesExtAclEntrySrcInetPrefixLen
1.3.6.1.4.1.1271.2.1.25.1.2.2.1.3
cienaCesExtAclEntryDstInetAddrType
Description and OID
This object indicates the IP network type which will be authorized. This OID current
specifies the Inet address type of the OIDs cienaCesExtAclEntryDstInetAddr
and cienaCesExtAclEntryDstInetPrefixLen. When representing: ipv4 :
cienaCesExtAclEntryDstInetAddr should be compliant with InetAddressIPv4
from RFC 4001 ipv6 : cienaCesExtAclEntryDstInetAddr should be compliant
with InetAddressIPv6 from RFC 4001
not-accessible
1.3.6.1.4.1.1271.2.1.25.1.2.2.1.4
cienaCesExtAclEntryDstInetAddr
Description and OID
Status
Access
current
not-accessible
1.3.6.1.4.1.1271.2.1.25.1.2.2.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-ACL-MIB 4-7
cienaCesExtAclEntryDstInetPrefixLen
Description and OID
Status
This object indicates the prefix length for the destination IP network that will be current
authorized. This OID should be used in conjunction with
cienaCesExtAclEntryDstInetAddrType.
Access
not-accessible
1.3.6.1.4.1.1271.2.1.25.1.2.2.1.6
cienaCesExtAclEntryNotifSrcInetAddrType
Description and OID
Status
Access
read-only
1.3.6.1.4.1.1271.2.1.25.1.2.2.1.7
cienaCesExtAclEntryNotifSrcInetAddr
Description and OID
Status
Access
current
read-only
Status
Access
read-only
1.3.6.1.4.1.1271.2.1.25.1.2.2.1.8
cienaCesExtAclEntryNotifSrcInetPrefixLen
Description and OID
1.3.6.1.4.1.1271.2.1.25.1.2.2.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
4-8 CIENA-CES-ACL-MIB
cienaCesExtAclEntryNotifDstInetAddrType
Description and OID
Status
Access
read-only
1.3.6.1.4.1.1271.2.1.25.1.2.2.1.10
cienaCesExtAclEntryNotifDstInetAddr
Description and OID
Status
Access
current
read-only
Status
Access
read-only
1.3.6.1.4.1.1271.2.1.25.1.2.2.1.11
cienaCesExtAclEntryNotifDstInetPrefixLen
Description and OID
1.3.6.1.4.1.1271.2.1.25.1.2.2.1.12
cienaCesExtAclEntryHits
Description and OID
Status
Access
This object indicates the number of lookups that matched the table entry.
current
read-only
1.3.6.1.4.1.1271.2.1.25.1.2.2.1.13
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-ACL-MIB 4-9
cienaCesExtAclEntryBadPort
Description and OID
Status
Access
This object indicates the number of lookups that failed because the ingress
port was disallowed by the table entry.
current
read-only
Status
Access
This object indicates the DSCP values for which IP packets are allowed to
ingress. The mask is big endian and each bit, numbered from 0 to 63,
represents a DSCP value numbered from 0 to 63. A value of
0xFFFFFFFFFFFFFFFF may be used to specify all.
current
read-only
Status
Access
This object indicates the number of lookups that failed because the ingress
DSCP value was disallowed by the table entry.
current
read-only
Status
Access
This object indicates the physical ports on which frames will be allowed to
ingress from. The mask is big endian and each bit, numbered from 0 to 63,
represents a physical port numbered from 1 to 64. A value of
0xFFFFFFFFFFFFFFFF may be used to specify all ports.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.25.1.2.2.1.14
cienaCesExtAclEntryDscpMask
1.3.6.1.4.1.1271.2.1.25.1.2.2.1.15
cienaCesExtAclEntryBadDscp
1.3.6.1.4.1.1271.2.1.25.1.2.2.1.16
cienaCesExtAclEntryPortBitMask
1.3.6.1.4.1.1271.2.1.25.1.2.2.1.17
cienaCesExtAclEntryProtocol
1.3.6.1.4.1.1271.2.1.25.1.2.2.1.18
MIB Reference
009-3220-011 Standard Revision A
August 2013
4-10 CIENA-CES-ACL-MIB
cienaCesExtAclEntryBadProtocol
Description and OID
Status
Access
This object indicates the number of lookups that failed because the protocol
value did't match what was in the ACL entry with IP address(es) matching
current
read-only
1.3.6.1.4.1.1271.2.1.25.1.2.2.1.19
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
5-1
CIENA-CES-BFD-MIB
1-
This chapter provides the object definitions and notifications for the CIENACES-BFD-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
cienaCesBfdSessionTable
Description and OID
Status
The (conceptual) table listing the config parameters for the Bfd Session Table. current
Access
not-accessible
1.3.6.1.4.1.1271.2.1.22.1.2.1
cienaCesBfdSessionEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.22.1.2.1.1
cienaCesBfdSessionIndex
1.3.6.1.4.1.1271.2.1.22.1.2.1.1.1
cienaCesBfdSessionName
1.3.6.1.4.1.1271.2.1.22.1.2.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
5-2 CIENA-CES-BFD-MIB
cienaCesBfdSessionAdminState
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The (conceptual) table listing the statistics for a given BFD Session
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.22.1.2.1.1.3
cienaCesBfdSessionOperState
1.3.6.1.4.1.1271.2.1.22.1.2.1.1.4
cienaCesBfdSessionStatsTable
1.3.6.1.4.1.1271.2.3.7.1
cienaCesBfdSessionStatsEntry
1.3.6.1.4.1.1271.2.3.7.1.1
cienaCesBfdSessionStatsTotalTx
1.3.6.1.4.1.1271.2.3.7.1.1.1
cienaCesBfdSessionStatsTotalRx
1.3.6.1.4.1.1271.2.3.7.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-BFD-MIB 5-3
cienaCesBfdSessionUpTime
Description and OID
Status
Access
This object specifies the time duration in seconds the session has been in the current
up state
read-only
1.3.6.1.4.1.1271.2.3.7.1.1.3
cienaCesBfdSessionDownTimeCount
Description and OID
Status
Access
This object specifies the total number of times a session changes from up to
operationally down state since creation
current
read-only
1.3.6.1.4.1.1271.2.3.7.1.1.4
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
cienaCesBfdSessionOperStateChangeTrap
A notification is sent whenever the Bfd Session Oper State has changed. To
send this trap,the cienaCesBfdSessionOperTrapState object must be
enabled (which is enabled by default).
Object Identifier: 1.3.6.1.4.1.1271.2.2.19.0.1
Status: current
Supported Platforms: 3916, 3930, 3931,3932, 3960, 5142, 5150, 5160
MIB Reference
009-3220-011 Standard Revision A
August 2013
6-1
CIENA-CES-DHCPV6-CLIENT-MIB
1-
This chapter provides the object definitions and notifications for the CIENACES-DHCPV6-CLIENT-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
cienaCesDhcpv6AdminState
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
This object indicates if rapid commit option is enabled on the DHCPv6 client. current
read-only
1.3.6.1.4.1.1271.2.1.30.1.1.1
cienaCesDhcpv6IfName
1.3.6.1.4.1.1271.2.1.30.1.1.2
cienaCesDhcpv6RapidCommitState
Description and OID
1.3.6.1.4.1.1271.2.1.30.1.1.3
cienaCesDhcpv6PrefLifetimeReq
Description and OID
Status
Access
The requested preferred lifetime for the IPv6 address expressed in seconds.
current
read-only
1.3.6.1.4.1.1271.2.1.30.1.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
6-2 CIENA-CES-DHCPV6-CLIENT-MIB
cienaCesDhcpv6ValidLifetimeReq
Description and OID
Status
Access
The requested valid lifetime for the IPv6 address expressed in seconds.
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.30.1.1.6
cienaCesDhcpv6ClientOptionTable
1.3.6.1.4.1.1271.2.1.30.1.1.7
cienaCesDhcpv6ClientOptionEntry
1.3.6.1.4.1.1271.2.1.30.1.1.7.1
cienaCesDhcpv6OptionCodeIndex
1.3.6.1.4.1.1271.2.1.30.1.1.7.1.1
cienaCesDhcpv6OptionDesc
1.3.6.1.4.1.1271.2.1.30.1.1.7.1.2
cienaCesDhcpv6OptionCode
1.3.6.1.4.1.1271.2.1.30.1.1.7.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-DHCPV6-CLIENT-MIB 6-3
cienaCesDhcpv6OptionState
Description and OID
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.30.1.1.7.1.4
cienaCesDhcpv6ClientSessTable
1.3.6.1.4.1.1271.2.1.30.1.1.8
cienaCesDhcpv6ClientSessEntry
1.3.6.1.4.1.1271.2.1.30.1.1.8.1
cienaCesDhcpv6ClientSessMgmtIntfIndex
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.1
cienaCesDhcpv6ClientSessState
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.2
cienaCesDhcpv6ClientSessAutoConfigState
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
6-4 CIENA-CES-DHCPV6-CLIENT-MIB
cienaCesDhcpv6ClientSessUpTime
Description and OID
Status
Access
The total length of time that this session has had active lease(s).
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The IP address type (IPv6) of the server from which this lease was obtained. current
read-only
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.4
cienaCesDhcpv6ClientSessPrefLifetime
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.5
cienaCesDhcpv6ClientSessValidLifetime
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.6
cienaCesDhcpv6ClientSessLeaseExpire
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.7
cienaCesDhcpv6ClientSessClientId
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.8
cienaCesDhcpv6ClientSessServerIpAddrType
Description and OID
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-DHCPV6-CLIENT-MIB 6-5
cienaCesDhcpv6ClientSessServerIpAddr
Description and OID
Status
Access
The IP address of the server from which this lease was obtained.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The (conceptual) table listing the statistics for DHCPv6 per interface
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.10
cienaCesDhcpv6ClientSessServerId
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.11
cienaCesDhcpv6ClientSessT1Time
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.12
cienaCesDhcpv6ClientSessT2Time
1.3.6.1.4.1.1271.2.1.30.1.1.8.1.13
cienaCesDhcpv6ClientSessStatsTable
1.3.6.1.4.1.1271.2.1.30.1.1.9
cienaCesDhcpv6ClientSessStatsEntry
1.3.6.1.4.1.1271.2.1.30.1.1.9.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
6-6 CIENA-CES-DHCPV6-CLIENT-MIB
cienaCesDhcpv6ClientSessStatsMgmtIntfIndex
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-write
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.1
cienaCesDhcpv6ClientSessStatsClear
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.2
cienaCesDhcpv6ClientSessStatsPktsRx
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.3
cienaCesDhcpv6ClientSessStatsReply
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.4
cienaCesDhcpv6ClientSessStatsAdvert
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.5
cienaCesDhcpv6ClientSessStatsRecfg
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-DHCPV6-CLIENT-MIB 6-7
cienaCesDhcpv6ClientSessStatsInvalid
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.7
cienaCesDhcpv6ClientSessStatsPktsTx
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.8
cienaCesDhcpv6ClientSessStatsSolicit
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.9
cienaCesDhcpv6ClientSessStatsRequest
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.10
cienaCesDhcpv6ClientSessStatsConfirm
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.11
cienaCesDhcpv6ClientSessStatsRenew
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
6-8 CIENA-CES-DHCPV6-CLIENT-MIB
cienaCesDhcpv6ClientSessStatsRebind
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.13
cienaCesDhcpv6ClientSessStatsInfoReq
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.14
cienaCesDhcpv6ClientSessStatsRelease
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.15
cienaCesDhcpv6ClientSessStatsDecline
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.16
cienaCesDhcpv6ClientSessStatsTxFail
1.3.6.1.4.1.1271.2.1.30.1.1.9.1.17
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
7-1
CIENA-CES-LDP-MIB
1-
This chapter provides the object definitions and notifications for the CIENACES-LDP-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
cienaCesLdpAdminStatus
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
The 16-bit integer value which is the proposed global hello hold timer (in
seconds) for LDP. An LSR maintains a record of Hellos received from potential
peers. This object represents the Hold Time in the Common Hello Parameters
TLV of the Hello Message. A value of 65535 means infinite (i.e., wait forever).
All other values represent the amount of time in seconds to wait for a Hello
Message. Setting the hold time to a value smaller than 15 is not recommended,
although not forbidden according to RFC3036.
read-only
1.3.6.1.4.1.1271.2.1.17.1.1.1
cienaCesLdpOperStatus
1.3.6.1.4.1.1271.2.1.17.1.1.2
cienaCesLdpHelloHoldTime
Description and OID
1.3.6.1.4.1.1271.2.1.17.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
7-2 CIENA-CES-LDP-MIB
cienaCesLdpKeepAliveHoldTime
Description and OID
Status
Access
The 16-bit integer value which is the proposed global keep alive hold timer for current
LDP.
read-only
1.3.6.1.4.1.1271.2.1.17.1.1.4
cienaCesLdpSessionTable
Description and OID
Status
A table of Sessions between the LDP Entities and LDP Peers. Each row in this current
table represents a single session.
Access
not-accessible
1.3.6.1.4.1.1271.2.1.17.1.2.1
cienaCesLdpSessionEntry
Description and OID
Status
Access
not-accessible
1.3.6.1.4.1.1271.2.1.17.1.2.1.1
cienaCesLdpEntityLdpId
Description and OID
Status
The LDP identifier. The first four octets encode an IP address assigned to the current
LSR, and the last two octets identify a specific label space within the LSR.
Access
not-accessible
1.3.6.1.4.1.1271.2.1.17.1.2.1.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-LDP-MIB 7-3
cienaCesLdpEntityIndex
Description and OID
Status
current
This index is used as a secondary index to uniquely identify this row. A
secondary index (this object) is meaningful to some but not all, LDP
implementations. For example, an LDP implementation that uses PPP would
use this index to differentiate PPP sub-links. Another way to use this index is
to assign it the value of ifIndex.
Access
not-accessible
1.3.6.1.4.1.1271.2.1.17.1.2.1.1.2
cienaCesLdpPeerLdpId
Description and OID
Status
Access
current
not-accessible
Status
Access
The locally configured keepalive hold time for this session, in seconds. Note
that the value of this field reflects configuration at the time of session
initialization; this may differ from the configuration that would apply to a new
session, if configuration has changed since this session was initialized.
current
read-only
Status
Access
current
The peer's advertised keepalive hold time for this session in seconds. Note
that the value of this field reflects the peer's configuration at the time of session
initialization; this may differ from the configuration that would apply to a new
session, if the peer's configuration has changed since this session was
initialized.
read-only
1.3.6.1.4.1.1271.2.1.17.1.2.1.1.3
cienaCesLdpSessionConfiguredHoldTime
1.3.6.1.4.1.1271.2.1.17.1.2.1.1.4
cienaCesLdpSessionPeerHoldTime
Description and OID
1.3.6.1.4.1.1271.2.1.17.1.2.1.1.5
cienaCesLdpSessionHoldTimeInUse
Description and OID
Status
Access
The keepalive hold time that is currently in use for this session, in seconds.
current
read-only
1.3.6.1.4.1.1271.2.1.17.1.2.1.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
7-4 CIENA-CES-LDP-MIB
cienaCesLdpHelloAdjacencyTable
Description and OID
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.1.17.1.2.2
cienaCesLdpHelloAdjacencyEntry
Description and OID
Each row represents a single LDP Hello Adjacency. An LDP Session can have current
one or more Hello Adjacencies.
not-accessible
1.3.6.1.4.1.1271.2.1.17.1.2.2.1
cienaCesLdpHelloAdjacencyIndex
Description and OID
Status
Access
current
not-accessible
Status
Access
The locally configured hello hold time for this adjacency, in seconds.
current
read-only
Status
Access
The peer's advertised hello hold time for this adjacency, in seconds.
current
read-only
1.3.6.1.4.1.1271.2.1.17.1.2.2.1.1
cienaCesLdpHelloAdjacencyConfiguredHoldTime
1.3.6.1.4.1.1271.2.1.17.1.2.2.1.2
cienaCesLdpHelloAdjacencyPeerHoldTime
1.3.6.1.4.1.1271.2.1.17.1.2.2.1.3
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
8-1
CIENA-CES-MGMT-INTERFACE-MIB
1-
This chapter provides the object definitions and notifications for the CIENACES-MGMT-INTERFACE-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
cienaCesInetMgmtInterfaceTable
Description and OID
Status
Access
current
not-accessible
Status
Access
These interfaces are used to cause the switch CPU to become involved with
the IP traffic. By default, a minimum of two interfaces , one for the local
management interface and one for the remote management interface.
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.1271.2.1.27.1.1.1
cienaCesInetMgmtInterfaceEntry
1.3.6.1.4.1.1271.2.1.27.1.1.1.1
cienaCesInetMgmtInterfaceIndex
1.3.6.1.4.1.1271.2.1.27.1.1.1.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
8-2 CIENA-CES-MGMT-INTERFACE-MIB
cienaCesInetMgmtInterfaceAddrType
Description and OID
Status
Access
current
not-accessible
Status
Access
Inet address associated with this interface. This OID should be used in
conjuction with cienaCesInetMgmtInterfaceAddrType. This value should be
compliant with RFC 4001 InetAddressType.
current
not-accessible
Status
Access
Specifies the address prefix length. This OID should be used in conjuction with current
cienaCesInetMgmtInterfaceAddrType. This OID should be compliant with
RFC 4001 InetAddressPrefixLength.
read-only
1.3.6.1.4.1.1271.2.1.27.1.1.1.1.2
cienaCesInetMgmtInterfaceAddr
1.3.6.1.4.1.1271.2.1.27.1.1.1.1.3
cienaCesInetMgmtInterfaceAddrPrefixLength
Description and OID
1.3.6.1.4.1.1271.2.1.27.1.1.1.1.4
cienaCesInetMgmtInterfaceName
Description and OID
Status
Access
current
read-only
Status
Access
The admin state of this management interface. A value of enabled(1) indicates current
that this interface is enabled and a value of disabled(2) indicates that this
interface is disabled.
read-only
1.3.6.1.4.1.1271.2.1.27.1.1.1.1.5
cienaCesInetMgmtInterfaceAdminState
Description and OID
1.3.6.1.4.1.1271.2.1.27.1.1.1.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-MGMT-INTERFACE-MIB 8-3
cienaCesInetMgmtInterfaceOperState
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
Specifies the management interface domain index. When
cienaCesInetMgmtInterfaceDomain represents 'vs', this object represents the
vs index. When cienaCesInetMgmtInterfaceDomain represents 'vlan , this
object represents the vlan id.
read-only
1.3.6.1.4.1.1271.2.1.27.1.1.1.1.7
cienaCesInetMgmtInterfaceDomain
1.3.6.1.4.1.1271.2.1.27.1.1.1.1.8
cienaCesInetMgmtInterfaceDomainId
Description and OID
1.3.6.1.4.1.1271.2.1.27.1.1.1.1.9
cienaCesInetMgmtInterfacePktPriority
Description and OID
Status
Access
The 802.1p priority value for the management traffic on this interface.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.27.1.1.1.1.10
cienaCesInetMgmtInterfaceMtu
1.3.6.1.4.1.1271.2.1.27.1.1.1.1.11
cienaCesInetMgmtInterfaceNotifIndex
1.3.6.1.4.1.1271.2.1.27.1.1.1.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
8-4 CIENA-CES-MGMT-INTERFACE-MIB
cienaCesInetMgmtInterfaceNotifAddrType
Description and OID
Status
Access
current
This OID specifies the Inet address type of the OIDs
cienaCesInetMgmtInterfaceNotifAddr and
cienaCesInetMgmtInterfacePrefixLength. When representing: ipv4 :
cienaCesInetMgmtInterfaceNotifAddr should be compliant with
InetAddressIPv4 from RFC 4001 ipv6 : cienaCesInetMgmtInterfaceNotifAddr
should be compliant with InetAddressIPv6 from RFC 4001
read-only
1.3.6.1.4.1.1271.2.1.27.1.1.1.1.13
cienaCesInetMgmtInterfaceNotifAddr
Description and OID
Status
Access
current
Inet address associated with this interface. This OID should be used in
conjuction with cienaCesInetMgmtInterfaceNotifAddrType. This value should
be compliant with RFC 4001 InetAddressType.
read-only
1.3.6.1.4.1.1271.2.1.27.1.1.1.1.14
cienaCesInetMgmtInterfaceDomainVsName
Description and OID
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.1271.2.1.27.1.1.1.1.15
cienaCesInetGatewayTable
1.3.6.1.4.1.1271.2.1.27.1.1.2
cienaCesInetGatewayEntry
1.3.6.1.4.1.1271.2.1.27.1.1.2.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-MGMT-INTERFACE-MIB 8-5
cienaCesInetGatewayAddrType
Description and OID
Status
current
This OID specifies the Inet Address Type of the OID
cienaCesInetGatewayAddr When representing : ipv4 :
cienaCesInetGatewayAddr should be compliant with InetAddressIPv4 from
RFC 4001 ipv6 : cienaCesInetGatewayAddr should be compliant with
InetAddressIPv6 from RFC 4001 ipv6z : cienaCesInetGatewayAddr should be
compliant with InetAddressIPv6z from RFC 4001
Access
not-accessible
1.3.6.1.4.1.1271.2.1.27.1.1.2.1.2
cienaCesInetGatewayAddr
Description and OID
Status
Access
Inet address associated with this interface. This OID should be used in
conjuction with cienaCesInetGatewayAddrType. The InetAddress set here
should be compliant with RFC 4001 InetAddressType.
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
This OID specifies the Inet Address Type of the OID
cienaCesInetGatewayNotifAddr When representing : ipv4 :
cienaCesInetGatewayNotifAddr should be compliant with InetAddressIPv4
from RFC 4001 ipv6 : cienaCesInetGatewayNotifAddr should be compliant
with InetAddressIPv6 from RFC 4001 ipv6z : cienaCesInetGatewayNotifAddr
should be compliant with InetAddressIPv6z from RFC 4001
read-only
1.3.6.1.4.1.1271.2.1.27.1.1.2.1.3
cienaCesInetGatewaySource
1.3.6.1.4.1.1271.2.1.27.1.1.2.1.4
cienaCesInetGatewayOperState
1.3.6.1.4.1.1271.2.1.27.1.1.2.1.5
cienaCesInetGatewayNotifAddrType
Description and OID
1.3.6.1.4.1.1271.2.1.27.1.1.2.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
8-6 CIENA-CES-MGMT-INTERFACE-MIB
cienaCesInetGatewayNotifAddr
Description and OID
Status
Access
Inet address associated with this interface. This OID should be used in
conjuction with cienaCesInetGatewayNotifAddrType. The InetAddress set
here should be compliant with RFC 4001 InetAddressType.
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This object indicates the forwarding state associated with this address type
represented by cienaCesInetAddrType.
current
read-only
Status
Access
This object indicates the default DSCP associated with this address type
represented by cienaCesInetAddrType.
current
read-only
1.3.6.1.4.1.1271.2.1.27.1.1.2.1.7
cienaCesInetStackTable
1.3.6.1.4.1.1271.2.1.27.1.1.3
cienaCesInetStackEntry
1.3.6.1.4.1.1271.2.1.27.1.1.3.1
cienaCesInetAddrType
1.3.6.1.4.1.1271.2.1.27.1.1.3.1.1
cienaCesInetForwardingState
1.3.6.1.4.1.1271.2.1.27.1.1.3.1.2
cienaCesInetDefaultDscp
1.3.6.1.4.1.1271.2.1.27.1.1.3.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-MGMT-INTERFACE-MIB 8-7
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
cienaCesInetMgmtAddrChangeNotification
A cienaCesInetMgmtAddrChangeNotification is sent when the inet address
of the associated interface changes.
Object Identifier: 1.3.6.1.4.1.1271.2.2.27.0.1
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
cienaCesInetMgmtAddrAddedNotification
A cienaCesInetMgmtAddrChangeNotification is sent when a new interface is
added.
Object Identifier: 1.3.6.1.4.1.1271.2.2.27.0.2
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
cienaCesInetMgmtAddrRemovedNotification
A cienaCesInetMgmtAddrChangeNotification is sent when an interface is
removed.
Object Identifier: 1.3.6.1.4.1.1271.2.2.27.0.3
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
cienaCesInetGatewayAddrChangeNotification
A cienaCesInetGatewayAddrChangeNotification is sent when the address
associated with the gateway is changed.
Object Identifier: 1.3.6.1.4.1.1271.2.2.27.0.4
Status: current
MIB Reference
009-3220-011 Standard Revision A
August 2013
8-8 CIENA-CES-MGMT-INTERFACE-MIB
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
cienaCesInetGatewayAddedNotification
A cienaCesInetGatewayAddrAddNotification is sent when a new gateway is
added.
Object Identifier: 1.3.6.1.4.1.1271.2.2.27.0.5
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
cienaCesInetGatewayRemovedNotification
A cienaCesInetGatewayRemovedNotification is sent when a gateway is
removed.
Object Identifier: 1.3.6.1.4.1.1271.2.2.27.0.6
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
MIB Reference
009-3220-011 Standard Revision A
August 2013
9-1
CIENA-CES-MPLS-MIB
1-
This chapter provides the object definitions and notifications for the CIENACES-MPLS-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
cienaCesMplsStaticAdminLabelRangeStart
Description and OID
Status
Access
The beginning of the static administrative label range. There cannot be any current
overlap between static and dynamic label ranges. Setting this object does not
become effective until the device is rebooted.
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.1.1
cienaCesMplsStaticAdminLabelRangeEnd
Description and OID
Status
Access
The end of the static administrative label range. There cannot be any overlap current
between static and dynamic label ranges. Setting this object does not become
effective until the device is rebooted.
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.1.2
cienaCesMplsStaticOperLabelRangeStart
Description and OID
Status
Access
The beginning of the static operational label range. There cannot be any
overlap between static and dynamic label ranges.
current
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
9-2 CIENA-CES-MPLS-MIB
cienaCesMplsStaticOperLabelRangeEnd
Description and OID
Status
Access
The end of the static operational label range. There cannot be any overlap
between static and dynamic label ranges.
current
read-only
Status
Access
The beginning of the dynamic administrative label range. There cannot be any current
overlap between static and dynamic label ranges.
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.1.4
cienaCesMplsDynamicAdminLabelRangeStart
Description and OID
1.3.6.1.4.1.1271.2.1.18.1.1.1.5
cienaCesMplsDynamicAdminLabelRangeEnd
Description and OID
Status
Access
The end of the dynamic administrative label range. There cannot be any
overlap between static and dynamic label ranges.
current
read-only
Status
Access
The beginning of the dynamic operational label range. There cannot be any
overlap between static and dynamic label ranges.
current
read-only
Status
Access
The end of the dynamic operational label range. There cannot be any overlap current
between static and dynamic label ranges.
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.1.6
cienaCesMplsDynamicOperLabelRangeStart
1.3.6.1.4.1.1271.2.1.18.1.1.1.7
cienaCesMplsDynamicOperLabelRangeEnd
Description and OID
1.3.6.1.4.1.1271.2.1.18.1.1.1.8
cienaCesMplsStaticIngressTunnelTable
Description and OID
Status
Access
current
not-accessible
1.3.6.1.4.1.1271.2.1.18.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-MPLS-MIB 9-3
cienaCesMplsStaticIngressTunnelEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This represents the encap tunnel name. Tunnel names are common across
static and dynamic.
current
read-only
Status
Access
A parameter to select the order of precedence of encap tunnels during tunnel current
switchover or reversion (if tunnel reversion is enabled). A higher weight
indicates higher preference during switchover or reversion.
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.2.1
cienaCesMplsStaticIngressTunnelIndex
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.1
cienaCesMplsStaticIngressTunnelName
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.2
cienaCesMplsStaticIngressTunnelWeight
Description and OID
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.3
cienaCesMplsStaticIngressTunnelNextHopIp
Description and OID
Status
Access
Specifies the next hop IP address for the static encap tunnel.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.4
cienaCesMplsStaticIngressTunnelAdminState
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
9-4 CIENA-CES-MPLS-MIB
cienaCesMplsStaticIngressTunnelOperState
Description and OID
Status
Access
current
read-only
Status
Access
Destination IP address of the static encap tunnel. If not specified, the static
encap tunnel inherits the IP address of the tunnel-group. This object cannot
be modified once the static encap tunnel entry is created.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The frame CoS map ID of the static encap tunnel. This value is valid if the
frame CoS policy selected for the static encap tunnel is rcos-mapped. This
value corresponds to the index cienaCesTceDpTsCosMapFcosMapId of the
cienaCesTceDpTsCosMapFcosMapTable.
current
read-only
Status
Access
This object is deprecated and the new object to provide this information is
cienaCesMplsStaticIngressTunnelFixedTC in this table.
deprecated
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.6
cienaCesMplsStaticIngressTunnelDestIpAddr
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.7
cienaCesMplsStaticIngressTunnelLabel
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.8
cienaCesMplsStaticIngressTunnelFrmCosPolicy
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.9
cienaCesMplsStaticIngressTunnelFrmCosMapId
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.10
cienaCesMplsStaticIngressTunnelFixedExp
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-MPLS-MIB 9-5
cienaCesMplsStaticIngressTunnelTTLPolicy
Description and OID
Status
Access
current
read-only
Status
Access
If the TTL policy for the static encap tunnel is fixed, then this object is the TTL current
value.
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.12
cienaCesMplsStaticIngressTunnelFixedTTL
Description and OID
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.13
cienaCesMplsStaticIngressTunnelGrpIndex
Description and OID
Status
Access
The group ID of the tunnel group of which the static encap tunnel is a member. current
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.14
cienaCesMplsStaticIngressTunnelReversion
Description and OID
Status
Access
Indicates whether tunnel reversion is turned on/off for this encap tunnel.
current
read-only
Status
Access
This object represents the tunnel reversion hold time in seconds before the
primary encap tunnel switches back as active tunnel in its tunnel group.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.16
cienaCesMplsStaticIngressTunnelReversionTimeout
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.17
cienaCesMplsStaticIngressTunnelPrimaryTunnelName
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.18
MIB Reference
009-3220-011 Standard Revision A
August 2013
9-6 CIENA-CES-MPLS-MIB
cienaCesMplsStaticIngressTunnelFixedTC
Description and OID
Status
Access
If the frame CoS policy for the static encap tunnel is fixed, this value is used
for MPLS encapsulation.
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
A parameter to select the order of precedence of encap tunnels during tunnel current
switchover or reversion (if tunnel reversion is enabled). A higher weight
indicates higher preference during switchover or reversion.
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.2.1.19
cienaCesMplsDynamicIngressTunnelTable
1.3.6.1.4.1.1271.2.1.18.1.1.3
cienaCesMplsDynamicIngressTunnelEntry
1.3.6.1.4.1.1271.2.1.18.1.1.3.1
cienaCesMplsDynamicIngressTunnelIndex
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.1
cienaCesMplsDynamicIngressTunnelName
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.2
cienaCesMplsDynamicIngressTunnelWeight
Description and OID
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-MPLS-MIB 9-7
cienaCesMplsDynamicIngressTunnelLspId
Description and OID
Status
Access
current
read-only
Status
Access
Specifies the next hop IP address for the dynamic encap tunnel.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
Destination IP address of the dynamic encap tunnel. If not specified, the
dynamic encap tunnel inherits the IP address of the tunnel group. This object
cannot be modified once the dynamic encap tunnel entry is created.
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.4
cienaCesMplsDynamicIngressTunnelNextHopIp
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.5
cienaCesMplsDynamicIngressTunnelAdminState
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.6
cienaCesMplsDynamicIngressTunnelOperState
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.7
cienaCesMplsDynamicIngressTunnelDestIpAddr
Description and OID
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.8
cienaCesMplsDynamicIngressTunnelLabel
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
9-8 CIENA-CES-MPLS-MIB
cienaCesMplsDynamicIngressTunnelFrmCosPolicy
Description and OID
Status
Access
current
read-only
Status
Access
The frame CoS map ID of the dynamic encap tunnel. This value is valid if the current
frame CoS policy selected for the dynamic encap tunnel is rcos-mapped. This
value corresponds to the index cienaCesTceDpTsCosMapFcosMapId of the
cienaCesTceDpTsCosMapFcosMapTable.
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.10
cienaCesMplsDynamicIngressTunnelFrmCosMapId
Description and OID
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.11
cienaCesMplsDynamicIngressTunnelFixedExp
Description and OID
Status
Access
This object is deprecated and the new object to provide this information is
cienaCesMplsDynamicIngressTunnelFixedTC in this table.
deprecated
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Indicates whether or not an FRR (fast re-route) tunnel needs to be created for current
this dynamic encap tunnel.
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.12
cienaCesMplsDynamicIngressTunnelSetupPriority
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.13
cienaCesMplsDynamicIngressTunnelHoldPriority
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.14
cienaCesMplsDynamicIngressTunnelRecordRoute
Description and OID
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.15
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-MPLS-MIB 9-9
cienaCesMplsDynamicIngressTunnelFastRoute
Description and OID
Status
Access
Indicates the fast route method for the dynamic encap tunnel. This object
cannot be modified once the dynamic encap tunnel entry is created.
current
read-only
Status
Access
current
read-only
Status
Access
If the TTL policy for the dynamic encap tunnel is fixed, this object is the TTL
value.
current
read-only
Status
Access
Index into the cienaCesmplsTunnelPathTable entry that specifies the explicit current
route hops for this dynamic encap tunnel.
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.16
cienaCesMplsDynamicIngressTunnelTTLPolicy
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.17
cienaCesMplsDynamicIngressTunnelFixedTTL
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.18
cienaCesMplsDynamicIngressTunnelPathIndex
Description and OID
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.19
cienaCesMplsDynamicIngressTunnelPathName
Description and OID
Status
Access
current
read-only
Status
Access
The group id of the tunnel group of which the dynamic encap tunnel is a
member.
current
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.20
cienaCesMplsDynamicIngressTunnelGrpIndex
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.21
MIB Reference
009-3220-011 Standard Revision A
August 2013
9-10 CIENA-CES-MPLS-MIB
cienaCesMplsDynamicIngressTunnelResourcePointer
Description and OID
Status
Access
current
read-only
Status
Access
Indicates whether tunnel reversion is turned on/off for this encap tunnel.
current
read-only
Status
Access
This object represents the tunnel reversion hold time in seconds before the
primary encap tunnel switches back as active tunnel in its tunnel group.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
If the frame CoS policy for the dynamic encap tunnel is fixed, this value is used current
for MPLS encapsulation.
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.23
cienaCesMplsDynamicIngressTunnelReversion
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.24
cienaCesMplsDynamicIngressTunnelReversionTimeout
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.25
cienaCesMplsDynamicIngressTunnelBandwidthProfile
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.26
cienaCesMplsDynamicIngressTunnelPrimaryTunnelName
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.27
cienaCesMplsDynamicIngressTunnelFixedTC
Description and OID
1.3.6.1.4.1.1271.2.1.18.1.1.3.1.28
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-MPLS-MIB 9-11
cienaCesMplsStaticEgressTunnelTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.4
cienaCesMplsStaticEgressTunnelEntry
1.3.6.1.4.1.1271.2.1.18.1.1.4.1
cienaCesMplsStaticEgressTunnelIndex
1.3.6.1.4.1.1271.2.1.18.1.1.4.1.1
cienaCesMplsStaticEgressTunnelName
1.3.6.1.4.1.1271.2.1.18.1.1.4.1.2
cienaCesMplsStaticEgressTunnelAdminState
1.3.6.1.4.1.1271.2.1.18.1.1.4.1.3
cienaCesMplsStaticEgressTunnelOperState
1.3.6.1.4.1.1271.2.1.18.1.1.4.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
9-12 CIENA-CES-MPLS-MIB
cienaCesMplsStaticEgressTunnelSourceIpAddr
Description and OID
Status
Access
Source IP address of the static decap tunnel. This object cannot be modified
once the static decap tunnel entry is created.
current
read-only
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.4.1.5
cienaCesMplsStaticEgressTunnelLabel
1.3.6.1.4.1.1271.2.1.18.1.1.4.1.6
cienaCesMplsDynamicEgressTunnelTable
1.3.6.1.4.1.1271.2.1.18.1.1.5
cienaCesMplsDynamicEgressTunnelEntry
1.3.6.1.4.1.1271.2.1.18.1.1.5.1
cienaCesMplsDynamicEgressTunnelIndex
1.3.6.1.4.1.1271.2.1.18.1.1.5.1.1
cienaCesMplsDynamicEgressTunnelName
1.3.6.1.4.1.1271.2.1.18.1.1.5.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-MPLS-MIB 9-13
cienaCesMplsDynamicEgressTunnelAdminState
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.5.1.3
cienaCesMplsDynamicEgressTunnelOperState
1.3.6.1.4.1.1271.2.1.18.1.1.5.1.4
cienaCesMplsDynamicEgressTunnelInstance
1.3.6.1.4.1.1271.2.1.18.1.1.5.1.5
cienaCesMplsDynamicEgressTunnelSourceIpAddr
1.3.6.1.4.1.1271.2.1.18.1.1.5.1.6
cienaCesMplsDynamicEgressTunnelDestIpAddr
1.3.6.1.4.1.1271.2.1.18.1.1.5.1.7
cienaCesMplsDynamicEgressTunnelLabel
1.3.6.1.4.1.1271.2.1.18.1.1.5.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
9-14 CIENA-CES-MPLS-MIB
cienaCesMplsStaticTransitTunnelTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.6
cienaCesMplsStaticTransitTunnelEntry
1.3.6.1.4.1.1271.2.1.18.1.1.6.1
cienaCesMplsStaticTransitTunnelIndex
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.1
cienaCesMplsStaticTransitTunnelName
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.2
cienaCesMplsStaticTransitTunnelAdminState
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.3
cienaCesMplsStaticTransitTunnelOperState
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-MPLS-MIB 9-15
cienaCesMplsStaticTransitTunnelNextHopIpAddr
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
If frame CoS policy for the static transit tunnel is fixed, this value is used for
MPLS encapsulation.
current
read-only
Status
Access
The frame CoS map ID of the static transit tunnel. This value is valid if the
frame cos policy selected for the static transit tunnel is rcos-mapped.
current
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.5
cienaCesMplsStaticTransitTunnelInLabel
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.6
cienaCesMplsStaticTransitTunnelOutLabel
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.7
cienaCesMplsStaticTransitTunnelFcosPolicy
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.8
cienaCesMplsStaticTransitTunnelFixedTc
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.9
cienaCesMplsStaticTransitTunnelFrmCosMapId
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
9-16 CIENA-CES-MPLS-MIB
cienaCesMplsStaticTransitTunnelTTLPolicy
Description and OID
Status
Access
current
read-only
Status
Access
If the TTL policy for the static transit tunnel is fixed, then this object is the TTL current
value.
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.11
cienaCesMplsStaticTransitTunnelFixedTTL
Description and OID
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.12
cienaCesMplsStaticTransitTunnelRcosPolicy
Description and OID
Status
Access
current
read-only
Status
Access
The resolved CoS map ID of the static transit tunnel. This value is valid if the
resolved CoS policy selected for the static transit tunnel is rcos-mapped.
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.13
cienaCesMplsStaticTransitTunnelRCosMapId
1.3.6.1.4.1.1271.2.1.18.1.1.6.1.14
cienaCesMplsDynamicTransitTunnelTable
1.3.6.1.4.1.1271.2.1.18.1.1.7
cienaCesMplsDynamicTransitTunnelEntry
1.3.6.1.4.1.1271.2.1.18.1.1.7.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-MPLS-MIB 9-17
cienaCesMplsDynamicTransitTunnelIndex
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.7.1.1
cienaCesMplsDynamicTransitTunnelName
1.3.6.1.4.1.1271.2.1.18.1.1.7.1.2
cienaCesMplsDynamicTransitTunnelAdminState
1.3.6.1.4.1.1271.2.1.18.1.1.7.1.3
cienaCesMplsDynamicTransitTunnelOperState
1.3.6.1.4.1.1271.2.1.18.1.1.7.1.4
cienaCesMplsDynamicTransitTunnelInLabel
1.3.6.1.4.1.1271.2.1.18.1.1.7.1.5
cienaCesMplsDynamicTransitTunnelOutLabel
1.3.6.1.4.1.1271.2.1.18.1.1.7.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
9-18 CIENA-CES-MPLS-MIB
cienaCesMplsTunnelPathTable
Description and OID
Status
The (conceptual) table listing the MPLS tunnel paths. To create an entry in the current
tunnel path table, cienaCesMplsTunnelPathName and
cienaCesMplsTunnelPathRowStatus must both be specified.
Access
not-accessible
1.3.6.1.4.1.1271.2.1.18.1.1.8.1
cienaCesMplsTunnelPathEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
Indicates the number of encap tunnels that are using this path.
current
read-only
Status
Access
1.3.6.1.4.1.1271.2.1.18.1.1.8.1.1
cienaCesMplsTunnelPathIndex
1.3.6.1.4.1.1271.2.1.18.1.1.8.1.1.1
cienaCesMplsTunnelPathName
1.3.6.1.4.1.1271.2.1.18.1.1.8.1.1.2
cienaCesMplsTunnelPathUseCount
1.3.6.1.4.1.1271.2.1.18.1.1.8.1.1.3
cienaCesMplsTunnelPathHopTable
Description and OID
The (conceptual) table listing the MPLS tunnel path hop. To create an entry in current
the path-hop table, cienaCesMplsTunnelPathHopIpAddr and
cienaCesMplsTunnelPathHopRowStatus must both be specified.
not-accessible
1.3.6.1.4.1.1271.2.1.18.1.1.8.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-MPLS-MIB 9-19
cienaCesMplsTunnelPathHopEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
IP address associated with this hop. This object cannot be modified once the current
path hop is created.
read-only
1.3.6.1.4.1.1271.2.1.18.1.1.8.2.1
cienaCesMplsTunnelPathHopIndex
1.3.6.1.4.1.1271.2.1.18.1.1.8.2.1.1
cienaCesMplsTunnelPathHopIpAddr
Description and OID
1.3.6.1.4.1.1271.2.1.18.1.1.8.2.1.2
cienaCesMplsTunnelPathHopType
Description and OID
Status
Access
Indidcates the hop type of the path member. This object cannot be modified
once the path hop is created.
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.1271.2.1.18.1.1.8.2.1.3
cienaCesMplsNotifEncapTunnelTable
1.3.6.1.4.1.1271.2.1.18.1.1.9.1
cienaCesMplsNotifEncapTunnelEntry
1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
9-20 CIENA-CES-MPLS-MIB
cienaCesMplsNotifEncapTunnelIndex
Description and OID
Status
Access
current
accessible-fornotify
Status
Access
Encap tunnel type of the encap tunnel associated with the notification.
current
accessible-fornotify
Status
Access
current
accessible-fornotify
Status
Access
current
accessible-fornotify
Status
Access
current
accessible-fornotify
Status
Access
current
not-accessible
1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.1
cienaCesMplsNotifEncapTunnelType
1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.2
cienaCesMplsNotifEncapTunnelName
1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.3
cienaCesMplsNotifEncapTunnelAdminState
1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.4
cienaCesMplsNotifEncapTunnelOperState
1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.5
cienaCesMplsNotifTransitTunnelTable
1.3.6.1.4.1.1271.2.1.18.1.1.10.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-MPLS-MIB 9-21
cienaCesMplsNotifTransitTunnelEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
accessible-fornotify
Status
Access
Transit tunnel type of the transit tunnel associated with the notification.
current
accessible-fornotify
Status
Access
current
accessible-fornotify
Status
Access
current
accessible-fornotify
Status
Access
current
accessible-fornotify
1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1
cienaCesMplsNotifTransitTunnelIndex
1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.1
cienaCesMplsNotifTransitTunnelType
1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.2
cienaCesMplsNotifTransitTunnelName
1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.3
cienaCesMplsNotifTransitTunnelAdminState
1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.4
cienaCesMplsNotifTransitTunnelOperState
1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
9-22 CIENA-CES-MPLS-MIB
cienaCesMplsNotifEncapTunnelGrpTable
Description and OID
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.1.18.1.1.11.1
cienaCesMplsNotifEncapTunnelGrpEntry
Description and OID
not-accessible
1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1
cienaCesMplsNotifEncapTunnelGrpIndex
Description and OID
Status
Access
Tunnel group index of the encap tunnel associated with the notification.
current
accessible-fornotify
Status
Access
Tunnel group name of the encap tunnel associated with the notification.
current
accessible-fornotify
Status
Access
1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.1
cienaCesMplsNotifEncapTunnelGrpName
1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.2
cienaCesMplsNotifEncapTunnelGrpActiveEncapTunlIndex
Description and OID
Active Encap Tunnel index of the tunnel group associated with the notification. current
1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.3
accessible-fornotify
cienaCesMplsNotifEncapTunnelGrpActiveEncapTunlName
Description and OID
Status
Access
Active Encap Tunnel name of the Tunnel group associated with the
notification.
current
accessible-fornotify
1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-MPLS-MIB 9-23
cienaCesMplsNotifEncapTunnelGrpActiveEncapTunlType
Description and OID
Status
Access
Encap tunnel type of the encap tunnel associated with the notification.
current
accessible-fornotify
1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.5
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
cienaCesMplsTunnelOperStateChgTrap
This notification is sent when the operational state of an encap tunnel
changes. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesMplsNotifEncapTunnelIndex,
cienaCesMplsNotifEncapTunnelType, cienaCesMplsNotifEncapTunnelName,
cienaCesMplsNotifEncapTunnelAdminState, and
cienaCesMplsNotifEncapTunnelOperState.
Object Identifier: 1.3.6.1.4.1.1271.2.2.17.0.1
Status: current
Supported Platforms: 3916, 3930, 3931,3932, 3960, 5142, 5150, 5160
cienaCesMplsEncapTunnelGrpActiveEncapTunnelChange
This notification is sent whenever the active encap tunnel in a tunnel group
changes.
Object Identifier: 1.3.6.1.4.1.1271.2.2.17.0.2
Status: current
Supported Platforms: 3916, 3930, 3931,3932, 3960, 5142, 5150, 5160
cienaCesMplsTransitTunnelOperStateChgTrap
This notification is sent when the operational state of a transit tunnel changes.
Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress,
cienaCesMplsNotifTransitTunnelIndex, cienaCesMplsNotifTransitTunnelType,
cienaCesMplsNotifTransitTunnelName,
cienaCesMplsNotifTransitTunnelAdminState, and
cienaCesMplsNotifTransitTunnelOperState.
Object Identifier: 1.3.6.1.4.1.1271.2.2.17.0.3
Status: current
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
9-24 CIENA-CES-MPLS-MIB
MIB Reference
009-3220-011 Standard Revision A
August 2013
10-1
CIENA-CES-OSPF-MIB
1-
This chapter provides the object definitions and notifications for the CIENACES-OSPF-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
cienaCesOspfRFC1583Comp
Description and OID
Status
Access
read-only
1.3.6.1.4.1.1271.2.1.19.1.1.1
cienaCesOspfOperStatus
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.19.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
10-2 CIENA-CES-OSPF-MIB
cienaCesOspfOpaqueLsaSupport
Description and OID
Status
Access
The router's support for Opaque LSA types. This value cannot be changed
when OSPF is active and operStatus is up.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The 32 bit sum of LS checksums of all type-11 LSAs in the external Link State current
Database.
read-only
1.3.6.1.4.1.1271.2.1.19.1.1.3
cienaCesOspfTrafficEngSupport
1.3.6.1.4.1.1271.2.1.19.1.1.4
cienaCesOspfExtOpLsaCount
1.3.6.1.4.1.1271.2.1.19.1.1.5
cienaCesOspfExtOpLsaCksumSum
Description and OID
1.3.6.1.4.1.1271.2.1.19.1.1.6
cienaCesOspfNumUpdPending
Description and OID
Status
Access
The number of updates that are pending addition to the Link State Database. current
read-only
1.3.6.1.4.1.1271.2.1.19.1.1.7
cienaCesOspfNumUpdMerged
Description and OID
Status
Access
The number of updates that have been merged into the Link State Database current
since the last routing calculation.
read-only
1.3.6.1.4.1.1271.2.1.19.1.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-OSPF-MIB 10-3
cienaCesOspfNumCksumsPending
Description and OID
Status
Access
The number of LSAs in the Link State Database which are now due to have
their checksum checked.
current
read-only
Status
Access
current
The maximum delay before the Routing Table is recalculated following a
change to the Link State Database. (Recalculation is delayed to reduce the
frequency of recalculations of the Routing Table). This parameter has units of
milliseconds. A value of 0 indicates that a routing calculation will immediately
follow an update to the database.
read-only
1.3.6.1.4.1.1271.2.1.19.1.1.9
cienaCesOspfCalcMaxDelay
Description and OID
1.3.6.1.4.1.1271.2.1.19.1.1.10
cienaCesOspfRouterId
Description and OID
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.1271.2.1.19.1.1.11
cienaCesOspfAreaTable
Description and OID
Information describing the configured parame- ters and cumulative statistics current
of the router's attached areas.
not-accessible
1.3.6.1.4.1.1271.2.1.19.1.2.1
cienaCesOspfAreaEntry
Description and OID
Status
Information describing the configured parame- ters and cumulative statistics current
of one of the router's attached areas.
Access
not-accessible
1.3.6.1.4.1.1271.2.1.19.1.2.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
10-4 CIENA-CES-OSPF-MIB
cienaCesOspfAreaId
Description and OID
Status
Access
A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the
OSPF backbone.
current
not-accessible
Status
Access
This parameter indicates whether the area can carry data traffic that neither current
originates nor terminates in the area itself. This parameter is calculated when
the area's shortest-path tree is built.
read-only
1.3.6.1.4.1.1271.2.1.19.1.2.1.1.1
cienaCesOspfAreaTransitCapability
Description and OID
1.3.6.1.4.1.1271.2.1.19.1.2.1.1.2
cienaCesOspfAreaRtrLsaCount
Description and OID
Status
Access
The number of LSAs with LS type-1 in this area's Link State Database.
current
read-only
Status
Access
The 32 bit sum of LS checksums of all LSAs with LS type-1 in this area's Link current
State Database.
read-only
1.3.6.1.4.1.1271.2.1.19.1.2.1.1.3
cienaCesOspfAreaRtrLsaCksumSum
Description and OID
1.3.6.1.4.1.1271.2.1.19.1.2.1.1.4
cienaCesOspfAreaNetLsaCount
Description and OID
Status
Access
The number of LSAs with LS type-2 in this area's Link State Database.
current
read-only
Status
Access
The 32 bit sum of LS checksums of all LSAs with LS type-2 in this area's Link current
State Database.
read-only
1.3.6.1.4.1.1271.2.1.19.1.2.1.1.5
cienaCesOspfAreaNetLsaCksumSum
Description and OID
1.3.6.1.4.1.1271.2.1.19.1.2.1.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-OSPF-MIB 10-5
cienaCesOspfAreaSummLsaCount
Description and OID
Status
Access
The number of LSAs with LS type-3 in this area's Link State Database.
current
read-only
Status
Access
The 32 bit sum of LS checksums of all LSAs with LS type-3 in this area's Link current
State Database.
read-only
1.3.6.1.4.1.1271.2.1.19.1.2.1.1.7
cienaCesOspfAreaSummLsaCksumSum
Description and OID
1.3.6.1.4.1.1271.2.1.19.1.2.1.1.8
cienaCesOspfAreaSummAsLsaCount
Description and OID
Status
Access
The number of LSAs with LS type-4 in this area's Link State Database.
current
read-only
Status
Access
The 32 bit sum of LS checksums of all LSAs with LS type-4 in this area's Link current
State Database.
read-only
1.3.6.1.4.1.1271.2.1.19.1.2.1.1.9
cienaCesOspfAreaSummAsLsaCksumSum
Description and OID
1.3.6.1.4.1.1271.2.1.19.1.2.1.1.10
cienaCesOspfAreaNssaLsaCount
Description and OID
Status
Access
The number of LSAs with LS type-7 in this area's Link State Database.
current
read-only
Status
Access
The 32 bit sum of LS checksums of all LSAs with LS type-7 in this area's Link current
State Database.
read-only
1.3.6.1.4.1.1271.2.1.19.1.2.1.1.11
cienaCesOspfAreaNssaLsaCksumSum
Description and OID
1.3.6.1.4.1.1271.2.1.19.1.2.1.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
10-6 CIENA-CES-OSPF-MIB
cienaCesOspfAreaOpLsaCount
Description and OID
Status
Access
The number of LSAs with LS type-10 in this area's Link State Database.
current
read-only
Status
Access
The 32 bit sum of LS checksums of all LSAs with LS type-10 in this area's Link current
State Database.
read-only
1.3.6.1.4.1.1271.2.1.19.1.2.1.1.13
cienaCesOspfAreaOpLsaCksumSum
Description and OID
1.3.6.1.4.1.1271.2.1.19.1.2.1.1.14
cienaCesOspfIfTable
Description and OID
Status
Access
The OSPF Interface Table describes the inter- faces from the viewpoint of
OSPF.
current
not-accessible
Status
Access
The OSPF Interface Entry describes one inter- face from the viewpoint of
OSPF.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.1271.2.1.19.1.2.2
cienaCesOspfIfEntry
1.3.6.1.4.1.1271.2.1.19.1.2.2.1
cienaCesOspfIfIpAddress
1.3.6.1.4.1.1271.2.1.19.1.2.2.1.1
cienaCesOspfAddressLessIf
1.3.6.1.4.1.1271.2.1.19.1.2.2.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-OSPF-MIB 10-7
cienaCesOspfIfLsaCount
Description and OID
Status
Access
The total number of link-local link state advertisements in this interface's link- current
local link state database.
read-only
1.3.6.1.4.1.1271.2.1.19.1.2.2.1.3
cienaCesOspfIfLsaCksumSum
Description and OID
Status
Access
current
The 32-bit unsigned sum of the link-state advertisements' LS checksums
contained in this interface's link-local link state database. The sum can be used
to determine if there has been a change in the interface's link state database,
and to compare the interface link-state database of routers attached to the
same subnet.
read-only
1.3.6.1.4.1.1271.2.1.19.1.2.2.1.4
cienaCesOspfIfOperStatus
Description and OID
Status
Access
current
read-only
Status
Access
The subnet mask associated with the IP address of this entry. The value of the current
mask is an IP address with all the network bits set to 1 and all the hosts bits
set to 0.
read-only
1.3.6.1.4.1.1271.2.1.19.1.2.2.1.5
cienaCesOspfIfNetMask
Description and OID
1.3.6.1.4.1.1271.2.1.19.1.2.2.1.6
cienaCesOspfIfTransmitTimerDelay
Description and OID
Status
Access
The time this interface will delay a LSU packet, in order to add more LSAs to current
the packet before sending. Setting this correctly can reduce the network
traffic. This is configurable on a per-interface basis.
read-only
1.3.6.1.4.1.1271.2.1.19.1.2.2.1.7
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-1
CIENA-CES-PM
1-
This chapter provides the object definitions and notifications for the CIENACES-PM module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
cienaCesPmGlobalState
Description and OID
Status
Access
This object allows the user to globally configure the PM administrative state.
This object must be enabled in order for a PM instance to be operationally
enabled.
current
read-write
Status
Access
This object allows the user to globally configure the PM persistence interval.
current
read-write
Status
Access
This object allows the user to globally configure the PM persistence storage.
current
read-write
1.3.6.1.4.1.1271.2.3.1.1.1
cienaCesPmPersistenceInterval
1.3.6.1.4.1.1271.2.3.1.1.2
cienaCesPmPersistenceStorage
1.3.6.1.4.1.1271.2.3.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-2 CIENA-CES-PM
cienaCesPmInstanceNextIndex
Description and OID
Status
Access
read-only
1.3.6.1.4.1.1271.2.3.1.2.1
cienaCesPmInstanceTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-create
1.3.6.1.4.1.1271.2.3.1.2.2.1
cienaCesPmInstanceEntry
1.3.6.1.4.1.1271.2.3.1.2.2.1.1
cienaCesPmInstanceIndex
1.3.6.1.4.1.1271.2.3.1.2.2.1.1.1
cienaCesPmInstanceName
1.3.6.1.4.1.1271.2.3.1.2.2.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-3
cienaCesPmInstanceType
Description and OID
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-only
Status
Access
current
read-create
1.3.6.1.4.1.1271.2.3.1.2.2.1.1.3
cienaCesPmInstanceInterfaceType
1.3.6.1.4.1.1271.2.3.1.2.2.1.1.4
cienaCesPmInstanceInterfaceId
1.3.6.1.4.1.1271.2.3.1.2.2.1.1.5
cienaCesPmInstanceInterfaceName
1.3.6.1.4.1.1271.2.3.1.2.2.1.1.6
cienaCesPmInstanceProfileType
1.3.6.1.4.1.1271.2.3.1.2.2.1.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-4 CIENA-CES-PM
cienaCesPmInstanceStartTime
Description and OID
Status
Access
When set, specifies the collection start time for the PM instance in the local
time zone. The input time format is hh:mm or hh:mm:ss. If not set, but
cienaCesPmInstanceStartDate is set, the time defaults to 00:00:00. When
read, indicates the collection start date and time for the PM instance in local
time or UTC, as determined by the system 'timestamp' setting, formatted as
'Wed Jun 30 21:49:08 1993'. A trailing 'Z' indicates UTC.
current
read-create
Status
Access
1.3.6.1.4.1.1271.2.3.1.2.2.1.1.8
cienaCesPmInstanceStartDate
Description and OID
When set, specifies the collection start date for the PM instance in the local current
time zone. The input date format is [yy]yy-mm-dd or mm-dd. If the year is
omitted, the current year is used. When read, indicates the collection start date
and time for the PM instance in local time or UTC, as determined by the system
'timestamp' setting, formatted as 'Wed Jun 30 21:49:08 1993'. A trailing 'Z'
indicates UTC.
read-create
1.3.6.1.4.1.1271.2.3.1.2.2.1.1.9
cienaCesPmInstanceEndTime
Description and OID
Status
When set, specifies the collection end time for the PM instance in the local time current
zone. The input time format is hh:mm or hh:mm:ss. If not set, but
cienaCesPmInstanceEndDate is set, the time defaults to 23:59:59. When
read, indicates the collection end date and time for the PM instance in local
time or UTC, as determined by the system 'timestamp' setting, formatted as
'Wed Jun 30 21:49:08 1993'. A trailing 'Z' indicates UTC.
Access
read-create
1.3.6.1.4.1.1271.2.3.1.2.2.1.1.10
cienaCesPmInstanceEndDate
Description and OID
Status
When set, specifies the collection end date for the PM instance in the local time current
zone. The input date format is [yy]yy-mm-dd or mm-dd. If the year is omitted,
the current year is used. When read, indicates the collection end date and time
for the PM instance in local time or UTC, as determined by the system
'timestamp' setting, formatted as 'Wed Jun 30 21:49:08 1993'. A trailing 'Z'
indicates UTC.
Access
read-create
1.3.6.1.4.1.1271.2.3.1.2.2.1.1.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-5
cienaCesPmInstanceBinCount
Description and OID
Status
current
Represents the number of history bins for the PM instance. A value of 0
indicates that there are no history bins other than the 24hrHistoryBin. The
current and current24Hr bins are not included in this bin count and still exist as
well.
Access
read-create
1.3.6.1.4.1.1271.2.3.1.2.2.1.1.12
cienaCesPmInstanceBinDuration
Description and OID
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.1271.2.3.1.2.2.1.1.13
cienaCesPmInstanceAdminState
1.3.6.1.4.1.1271.2.3.1.2.2.1.1.14
cienaCesPmInstanceOperState
1.3.6.1.4.1.1271.2.3.1.2.2.1.1.15
cienaCesPmInstanceCollectionTimeFormat
Description and OID
current
This object allows the user to choose the reference time of PM instance
collection start and end times. The value none(0) sets the start time to now and
the end time to none, ignoring any time values specified by the user. The value
utc(1) sets the start and end time value references to the Unix Epoch, January
1, 1970, 00:00:00 UTC. The value relative-to-now(2) sets the start and end
time value references to now. The default value is none(0). This object
returns a value of none(0) on GET.
read-create
1.3.6.1.4.1.1271.2.3.1.2.2.1.1.16
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-6 CIENA-CES-PM
cienaCesPmInstanceStartTimeValue
Description and OID
Status
current
This object specifies the collection start time of the PM instance in seconds
from the reference time specified by the value of the
cienaCesPmInstanceCollectionTimeFormat object. If the collection time
format is set to utc(1), then this object specifies the start time value in the Unix
Epoch, starting January 1, 1970, 00:00:00 UTC. If the
cienaCesPmInstanceCollectionTimeFormat is set to relative-to-now(2), this
object specifies the start time in seconds from now. If the
cienaCesPmInstanceCollectionTimeFormat object has a value of none(0), the
value of this object is ignored and the start time is set to now. This object
returns a value of 0 on GET. The start date/time for the PM instance is
displayed using the cienaCesPmInstanceStartDate/
cienaCesPmInstanceStartTime objects.
Access
read-create
1.3.6.1.4.1.1271.2.3.1.2.2.1.1.17
cienaCesPmInstanceEndTimeValue
Description and OID
Status
current
This object specifies the collection end time of the PM instance in seconds
from the reference time specified by the value of the
cienaCesPmInstanceCollectionTimeFormat object. If the collection time
format is set to utc(1), then this object specifies the end time value relative to
the Unix Epoch, January 1, 1970, 00:00:00 UTC. If the
cienaCesPmInstanceCollectionTimeFormat is set to relative-to-now(2), this
object specifies the end time in seconds from now. If the value of the
cienaCesPmInstanceCollectionTimeFormat object is none(0), the value of this
object is ignored and no specific collection end time is specified. This object
returns a value of 0 on GET. The end date/time for the PM instance is
displayed using the cienaCesPmInstanceEndDate/
cienaCesPmInstanceEndTime objects.
Access
read-create
1.3.6.1.4.1.1271.2.3.1.2.2.1.1.18
cienaCesPmInstanceRowStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, set this object to 'destroy'.
Access
read-create
1.3.6.1.4.1.1271.2.3.1.2.2.1.1.19
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-7
cienaCesPmInstanceClear
Description and OID
Status
Access
Clears the current counts for the bins associated with given instance.
current
read-create
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-create
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.2.1.1.20
cienaCesPmInstanceInterfaceId2
1.3.6.1.4.1.1271.2.3.1.2.2.1.1.21
cienaCesPmInstanceDynamic
1.3.6.1.4.1.1271.2.3.1.2.2.1.1.22
cienaCesPmInstanceConfigurationMode
1.3.6.1.4.1.1271.2.3.1.2.2.1.1.23
cienaCesPmInstanceAlignment
1.3.6.1.4.1.1271.2.3.1.2.2.1.1.24
cienaCesPmInstanceInterfaceOperState
1.3.6.1.4.1.1271.2.3.1.2.2.1.1.25
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-8 CIENA-CES-PM
cienaCesPmExtendedTxRxHistoryBinTable
Description and OID
Status
Access
The (conceptual) read-only table listing the extended TxRx profile statistics.
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.3.1.2.3.1.1
cienaCesPmExtendedTxRxHistoryBinEntry
Description and OID
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1
cienaCesPmExtendedTxRxHistoryBinIndex
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.1
cienaCesPmExtendedTxRxHistoryBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.2
cienaCesPmExtendedTxRxHistoryBinEndTime
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.3
cienaCesPmExtendedTxRxHistoryBinClearTime
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-9
cienaCesPmExtendedTxRxHistoryBinDuration
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The total number of multicast packets received for the given port.
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.5
cienaCesPmExtendedTxRxHistoryBinState
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.6
cienaCesPmExtendedTxRxHistoryBinRxBytes
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.7
cienaCesPmExtendedTxRxHistoryBinRxPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.8
cienaCesPmExtendedTxRxHistoryBinRxCrcErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.9
cienaCesPmExtendedTxRxHistoryBinRxMcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-10 CIENA-CES-PM
cienaCesPmExtendedTxRxHistoryBinRxBcastPkts
Description and OID
Status
Access
current
read-only
Status
Access
The total number of packets received that were less than 64 octets long
(excluding framing bits, but including FCS octets) and were otherwise well
formed.
current
read-only
Status
Access
The total number of packets received that were longer than 1518 octets but
less than or equal to the MTU (excluding framing bits, but including FCS
octets) and were otherwise well formed.
current
read-only
Status
Access
The total number of packets received that were less than 64 octets in length current
(excluding framing bits but including FCS octets) and had either a bad Frame
Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad
FCS with a non-integral number of octets (Alignment Error).
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.11
cienaCesPmExtendedTxRxHistoryBinUndersizePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.12
cienaCesPmExtendedTxRxHistoryBinOversizePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.13
cienaCesPmExtendedTxRxHistoryBinFragmentsPkts
Description and OID
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.14
cienaCesPmExtendedTxRxHistoryBinJabbersPkts
Description and OID
Status
Access
current
The total number of packets received that were longer than 1518 octets
(excluding framing bits, but including FCS octets), and had either a bad Frame
Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad
FCS with a non-integral number of octets (Alignment Error).
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.15
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-11
cienaCesPmExtendedTxRxHistoryBin64OctsPkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that were 64
octets in length (excluding framing bits but including FCS octets).
current
read-only
Status
Access
The total number of packets (including bad packets) received that were
between 65 and 127 octets in length inclusive (excluding framing bits but
including FCS octets).
current
read-only
Status
Access
The total number of packets (including bad packets) received that were
between 128 and 255 octets in length inclusive (excluding framing bits but
including FCS octets).
current
read-only
Status
Access
The total number of packets (including bad packets) received that were
between 256 and 511 octets in length inclusive (excluding framing bits but
including FCS octets).
current
read-only
Status
Access
The total number of packets (including bad packets) received that were
between 512 and 1023 octets in length inclusive (excluding framing bits but
including FCS octets).
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.16
cienaCesPmExtendedTxRxHistoryBin65To127OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.17
cienaCesPmExtendedTxRxHistoryBin128To255OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.18
cienaCesPmExtendedTxRxHistoryBin256To511OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.19
cienaCesPmExtendedTxRxHistoryBin512To1023OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.20
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-12 CIENA-CES-PM
cienaCesPmExtendedTxRxHistoryBin1024To1518OctsPkts
Description and OID
Status
Access
current
The total number of packets (including bad packets) received that were
between 1024 and 1518 octets in length inclusive (excluding framing bits but
including FCS octets).
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.21
cienaCesPmExtendedTxRxHistoryBinTxBytes
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.22
cienaCesPmExtendedTxRxHistoryBinTxTBytes
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.23
cienaCesPmExtendedTxRxHistoryBinTxPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.24
cienaCesPmExtendedTxRxHistoryBinTxBcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.25
cienaCesPmExtendedTxRxHistoryBinTxMcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.26
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-13
cienaCesPmExtendedTxRxHistoryBinTxExDeferPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.27
cienaCesPmExtendedTxRxHistoryBinTxGiantPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.28
cienaCesPmExtendedTxRxHistoryBinTxUnderRunPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.29
cienaCesPmExtendedTxRxHistoryBinTxCrcErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.30
cienaCesPmExtendedTxRxHistoryBinTxLCheckErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.31
cienaCesPmExtendedTxRxHistoryBinTxLOutRangePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.32
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-14 CIENA-CES-PM
cienaCesPmExtendedTxRxHistoryBinTxLateCollPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.33
cienaCesPmExtendedTxRxHistoryBinTxExCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.34
cienaCesPmExtendedTxRxHistoryBinTxSingleCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.35
cienaCesPmExtendedTxRxHistoryBinTxCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.36
cienaCesPmExtendedTxRxHistoryBinDropEvents
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.37
cienaCesPmExtendedTxRxHistoryBinInDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.38
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-15
cienaCesPmExtendedTxRxHistoryBinTxPausePkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.39
cienaCesPmExtendedTxRxHistoryBinRxPausePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.40
cienaCesPmExtendedTxRxHistoryBinRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.41
cienaCesPmExtendedTxRxHistoryBinRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.42
cienaCesPmExtendedTxRxHistoryBinTxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.43
cienaCesPmExtendedTxRxHistoryBinTxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.44
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-16 CIENA-CES-PM
cienaCesPmExtendedTxRxHistoryBinRxLOutRangePkts
Description and OID
Status
Access
The total number of packets received that were longer than than the MTU
(excluding framing bits, but including FCS octets) and were otherwise well
formed.
current
read-only
Status
Access
The (conceptual) read-only table listing the extended TxRx profile statistics.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.45
cienaCesPmExtendedTxRxCurrBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.1.2
cienaCesPmExtendedTxRxCurrBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1
cienaCesPmExtendedTxRxCurrBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.1
cienaCesPmExtendedTxRxCurrBinClearedTime
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.2
cienaCesPmExtendedTxRxCurrBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-17
cienaCesPmExtendedTxRxCurrBinState
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.4
cienaCesPmExtendedTxRxCurrBinRxBytes
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.5
cienaCesPmExtendedTxRxCurrBinRxPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.6
cienaCesPmExtendedTxRxCurrBinRxCrcErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.7
cienaCesPmExtendedTxRxCurrBinRxMcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.8
cienaCesPmExtendedTxRxCurrBinRxBcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-18 CIENA-CES-PM
cienaCesPmExtendedTxRxCurrBinUndersizePkts
Description and OID
Status
Access
The total number of packets received that were less than 64 octets long
(excluding framing bits, but including FCS octets) and were otherwise well
formed.
current
read-only
Status
Access
The total number of packets received that were longer than 1518 octets but
less than or equal to the MTU (excluding framing bits, but including FCS
octets) and were otherwise well formed.
current
read-only
Status
Access
The total number of packets received that were less than 64 octets in length current
(excluding framing bits but including FCS octets) and had either a bad Frame
Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad
FCS with a non-integral number of octets (Alignment Error).
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.10
cienaCesPmExtendedTxRxCurrBinOversizePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.11
cienaCesPmExtendedTxRxCurrBinFragmentsPkts
Description and OID
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.12
cienaCesPmExtendedTxRxCurrBinJabbersPkts
Description and OID
Status
Access
current
The total number of packets received that were longer than 1518 octets
(excluding framing bits, but including FCS octets), and had either a bad Frame
Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad
FCS with a non-integral number of octets (Alignment Error).
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.13
cienaCesPmExtendedTxRxCurrBin64OctsPkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that were 64
octets in length (excluding framing bits but including FCS octets).
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.14
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-19
cienaCesPmExtendedTxRxCurrBin65To127OctsPkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that were
between 65 and 127 octets in length inclusive (excluding framing bits but
including FCS octets).
current
read-only
Status
Access
The total number of packets (including bad packets) received that were
between 128 and 255 octets in length inclusive (excluding framing bits but
including FCS octets).
current
read-only
Status
Access
The total number of packets (including bad packets) received that were
between 256 and 511 octets in length inclusive (excluding framing bits but
including FCS octets).
current
read-only
Status
Access
The total number of packets (including bad packets) received that were
between 512 and 1023 octets in length inclusive (excluding framing bits but
including FCS octets).
current
read-only
Status
Access
current
The total number of packets (including bad packets) received that were
between 1024 and 1518 octets in length inclusive (excluding framing bits but
including FCS octets).
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.15
cienaCesPmExtendedTxRxCurrBin128To255OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.16
cienaCesPmExtendedTxRxCurrBin256To511OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.17
cienaCesPmExtendedTxRxCurrBin512To1023OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.18
cienaCesPmExtendedTxRxCurrBin1024To1518OctsPkts
Description and OID
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.19
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-20 CIENA-CES-PM
cienaCesPmExtendedTxRxCurrBinTxBytes
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.20
cienaCesPmExtendedTxRxCurrBinTxTBytes
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.21
cienaCesPmExtendedTxRxCurrBinTxPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.22
cienaCesPmExtendedTxRxCurrBinTxBcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.23
cienaCesPmExtendedTxRxCurrBinTxMcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.24
cienaCesPmExtendedTxRxCurrBinTxExDeferPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.25
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-21
cienaCesPmExtendedTxRxCurrBinTxGiantPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.26
cienaCesPmExtendedTxRxCurrBinTxUnderRunPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.27
cienaCesPmExtendedTxRxCurrBinTxCrcErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.28
cienaCesPmExtendedTxRxCurrBinTxLCheckErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.29
cienaCesPmExtendedTxRxCurrBinTxLOutRangePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.30
cienaCesPmExtendedTxRxCurrBinTxLateCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.31
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-22 CIENA-CES-PM
cienaCesPmExtendedTxRxCurrBinTxExCollPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.32
cienaCesPmExtendedTxRxCurrBinTxSingleCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.33
cienaCesPmExtendedTxRxCurrBinTxCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.34
cienaCesPmExtendedTxRxCurrBinDropEvents
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.35
cienaCesPmExtendedTxRxCurrBinInDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.36
cienaCesPmExtendedTxRxCurrBinTxPausePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.37
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-23
cienaCesPmExtendedTxRxCurrBinRxPausePkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The total number of packets received that were longer than than the MTU
(excluding framing bits, but including FCS octets) and were otherwise well
formed.
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.38
cienaCesPmExtendedTxRxCurrBinRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.39
cienaCesPmExtendedTxRxCurrBinRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.40
cienaCesPmExtendedTxRxCurrBinTxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.41
cienaCesPmExtendedTxRxCurrBinTxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.42
cienaCesPmExtendedTxRxCurrBinRxLOutRangePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.43
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-24 CIENA-CES-PM
cienaCesPmExtendedTxRxCurr24HBinTable
Description and OID
Status
Access
The (conceptual) read-only table listing the extended TxRx profile statistics.
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.3.1.2.3.1.3
cienaCesPmExtendedTxRxCurr24HBinEntry
Description and OID
current
An entry (conceptual row) in the
cienaCesPmExtendedTxRxCurr24HBinTable. This table lists the statistics for
the current 24 hours.
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1
cienaCesPmExtendedTxRxCurr24HBinStartTime
Description and OID
Status
Access
Collection start time for the current 24 hour statistics for this PM instance.
current
read-only
Status
Access
Collection end time for the current 24 hour statistics for this PM instance.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.1
cienaCesPmExtendedTxRxCurr24HBinEndTime
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.2
cienaCesPmExtendedTxRxCurr24HBinClearedTime
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.3
cienaCesPmExtendedTxRxCurr24HBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-25
cienaCesPmExtendedTxRxCurr24HBinState
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.5
cienaCesPmExtendedTxRxCurr24HBinRxBytes
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.6
cienaCesPmExtendedTxRxCurr24HBinRxPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.7
cienaCesPmExtendedTxRxCurr24HBinRxCrcErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.8
cienaCesPmExtendedTxRxCurr24HBinRxMcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.9
cienaCesPmExtendedTxRxCurr24HBinRxBcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-26 CIENA-CES-PM
cienaCesPmExtendedTxRxCurr24HBinUndersizePkts
Description and OID
Status
Access
The total number of packets received that were less than 64 octets long
(excluding framing bits, but including FCS octets) and were otherwise well
formed.
current
read-only
Status
Access
The total number of packets received that were longer than 1518 octets but
less than or equal to the MTU (excluding framing bits, but including FCS
octets) and were otherwise well formed.
current
read-only
Status
Access
The total number of packets received that were less than 64 octets in length current
(excluding framing bits but including FCS octets) and had either a bad Frame
Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad
FCS with a non-integral number of octets (Alignment Error).
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.11
cienaCesPmExtendedTxRxCurr24HBinOversizePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.12
cienaCesPmExtendedTxRxCurr24HBinFragmentsPkts
Description and OID
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.13
cienaCesPmExtendedTxRxCurr24HBinJabbersPkts
Description and OID
Status
Access
current
The total number of packets received that were longer than 1518 octets
(excluding framing bits, but including FCS octets), and had either a bad Frame
Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad
FCS with a non-integral number of octets (Alignment Error).
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.14
cienaCesPmExtendedTxRxCurr24HBin64OctsPkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that were 64
octets in length (excluding framing bits but including FCS octets).
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.15
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-27
cienaCesPmExtendedTxRxCurr24HBin65To127OctsPkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that were
between 65 and 127 octets in length inclusive (excluding framing bits but
including FCS octets).
current
read-only
Status
Access
The total number of packets (including bad packets) received that were
between 128 and 255 octets in length inclusive (excluding framing bits but
including FCS octets).
current
read-only
Status
Access
The total number of packets (including bad packets) received that were
between 256 and 511 octets in length inclusive (excluding framing bits but
including FCS octets).
current
read-only
Status
Access
The total number of packets (including bad packets) received that were
between 512 and 1023 octets in length inclusive (excluding framing bits but
including FCS octets).
current
read-only
Status
Access
current
The total number of packets (including bad packets) received that were
between 1024 and 1518 octets in length inclusive (excluding framing bits but
including FCS octets).
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.16
cienaCesPmExtendedTxRxCurr24HBin128To255OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.17
cienaCesPmExtendedTxRxCurr24HBin256To511OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.18
cienaCesPmExtendedTxRxCurr24HBin512To1023OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.19
cienaCesPmExtendedTxRxCurr24HBin1024To1518OctsPkts
Description and OID
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.20
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-28 CIENA-CES-PM
cienaCesPmExtendedTxRxCurr24HBinTxBytes
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.21
cienaCesPmExtendedTxRxCurr24HBinTxTBytes
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.22
cienaCesPmExtendedTxRxCurr24HBinTxPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.23
cienaCesPmExtendedTxRxCurr24HBinTxBcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.24
cienaCesPmExtendedTxRxCurr24HBinTxMcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.25
cienaCesPmExtendedTxRxCurr24HBinTxExDeferPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.26
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-29
cienaCesPmExtendedTxRxCurr24HBinTxGiantPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.27
cienaCesPmExtendedTxRxCurr24HBinTxUnderRunPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.28
cienaCesPmExtendedTxRxCurr24HBinTxCrcErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.29
cienaCesPmExtendedTxRxCurr24HBinTxLCheckErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.30
cienaCesPmExtendedTxRxCurr24HBinTxLOutRangePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.31
cienaCesPmExtendedTxRxCurr24HBinTxLateCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.32
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-30 CIENA-CES-PM
cienaCesPmExtendedTxRxCurr24HBinTxExCollPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.33
cienaCesPmExtendedTxRxCurr24HBinTxSingleCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.34
cienaCesPmExtendedTxRxCurr24HBinTxCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.35
cienaCesPmExtendedTxRxCurr24HBinDropEvents
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.36
cienaCesPmExtendedTxRxCurr24HBinInDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.37
cienaCesPmExtendedTxRxCurr24HBinTxPausePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.38
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-31
cienaCesPmExtendedTxRxCurr24HBinRxPausePkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The total number of packets received that were longer than than the MTU
(excluding framing bits, but including FCS octets) and were otherwise well
formed.
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.39
cienaCesPmExtendedTxRxCurr24HBinRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.40
cienaCesPmExtendedTxRxCurr24HBinRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.41
cienaCesPmExtendedTxRxCurr24HBinTxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.42
cienaCesPmExtendedTxRxCurr24HBinTxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.43
cienaCesPmExtendedTxRxCurr24HBinRxLOutRangePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.44
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-32 CIENA-CES-PM
cienaCesPmExtendedTxRxHist24HBinTable
Description and OID
Status
Access
The (conceptual) read-only table listing the extended TxRx profile statistics.
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.3.1.2.3.1.4
cienaCesPmExtendedTxRxHist24HBinEntry
Description and OID
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1
cienaCesPmExtendedTxRxHist24HBinStartTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.1
cienaCesPmExtendedTxRxHist24HBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.2
cienaCesPmExtendedTxRxHist24HBinState
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.3
cienaCesPmExtendedTxRxHist24HBinRxBytes
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-33
cienaCesPmExtendedTxRxHist24HBinRxPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The total number of multicast packets received for the given PM instance.
current
read-only
Status
Access
current
read-only
Status
Access
The total number of packets received that were less than 64 octets long
(excluding framing bits, but including FCS octets) and were otherwise well
formed.
current
read-only
Status
Access
The total number of packets received that were longer than 1518 octets but
less than or equal to the MTU (excluding framing bits, but including FCS
octets) and were otherwise well formed.
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.5
cienaCesPmExtendedTxRxHist24HBinRxCrcErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.6
cienaCesPmExtendedTxRxHist24HBinRxMcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.7
cienaCesPmExtendedTxRxHist24HBinRxBcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.8
cienaCesPmExtendedTxRxHist24HBinUndersizePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.9
cienaCesPmExtendedTxRxHist24HBinOversizePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-34 CIENA-CES-PM
cienaCesPmExtendedTxRxHist24HBinFragmentsPkts
Description and OID
Status
Access
The total number of packets received that were less than 64 octets in length current
(excluding framing bits but including FCS octets) and had either a bad Frame
Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad
FCS with a non-integral number of octets (Alignment Error).
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.11
cienaCesPmExtendedTxRxHist24HBinJabbersPkts
Description and OID
Status
Access
current
The total number of packets received that were longer than 1518 octets
(excluding framing bits, but including FCS octets), and had either a bad Frame
Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad
FCS with a non-integral number of octets (Alignment Error).
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.12
cienaCesPmExtendedTxRxHist24HBin64OctsPkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that were 64
octets in length (excluding framing bits but including FCS octets).
current
read-only
Status
Access
The total number of packets (including bad packets) received that were
between 65 and 127 octets in length inclusive (excluding framing bits but
including FCS octets).
current
read-only
Status
Access
The total number of packets (including bad packets) received that were
between 128 and 255 octets in length inclusive (excluding framing bits but
including FCS octets).
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.13
cienaCesPmExtendedTxRxHist24HBin65To127OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.14
cienaCesPmExtendedTxRxHist24HBin128To255OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.15
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-35
cienaCesPmExtendedTxRxHist24HBin256To511OctsPkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that were
between 256 and 511 octets in length inclusive (excluding framing bits but
including FCS octets).
current
read-only
Status
Access
The total number of packets (including bad packets) received that were
between 512 and 1023 octets in length inclusive (excluding framing bits but
including FCS octets).
current
read-only
Status
Access
current
The total number of packets (including bad packets) received that were
between 1024 and 1518 octets in length inclusive (excluding framing bits but
including FCS octets).
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.16
cienaCesPmExtendedTxRxHist24HBin512To1023OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.17
cienaCesPmExtendedTxRxHist24HBin1024To1518OctsPkts
Description and OID
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.18
cienaCesPmExtendedTxRxHist24HBinTxBytes
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.19
cienaCesPmExtendedTxRxHist24HBinTxTBytes
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.20
cienaCesPmExtendedTxRxHist24HBinTxPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.21
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-36 CIENA-CES-PM
cienaCesPmExtendedTxRxHist24HBinTxBcastPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.22
cienaCesPmExtendedTxRxHist24HBinTxMcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.23
cienaCesPmExtendedTxRxHist24HBinTxExDeferPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.24
cienaCesPmExtendedTxRxHist24HBinTxGiantPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.25
cienaCesPmExtendedTxRxHist24HBinTxUnderRunPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.26
cienaCesPmExtendedTxRxHist24HBinTxCrcErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.27
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-37
cienaCesPmExtendedTxRxHist24HBinTxLCheckErrorPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.28
cienaCesPmExtendedTxRxHist24HBinTxLOutRangePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.29
cienaCesPmExtendedTxRxHist24HBinTxLateCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.30
cienaCesPmExtendedTxRxHist24HBinTxExCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.31
cienaCesPmExtendedTxRxHist24HBinTxSingleCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.32
cienaCesPmExtendedTxRxHist24HBinTxCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.33
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-38 CIENA-CES-PM
cienaCesPmExtendedTxRxHist24HBinDropEvents
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.34
cienaCesPmExtendedTxRxHist24HBinInDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.35
cienaCesPmExtendedTxRxHist24HBinTxPausePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.36
cienaCesPmExtendedTxRxHist24HBinRxPausePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.37
cienaCesPmExtendedTxRxHist24HBinRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.38
cienaCesPmExtendedTxRxHist24HBinRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.39
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-39
cienaCesPmExtendedTxRxHist24HBinTxBytesPerSec
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The total number of packets received that were longer than the MTU
(excluding framing bits, but including FCS octets) and were otherwise well
formed.
current
read-only
Status
Access
The (conceptual) read-only table listing the extended TxRx profile statistics.
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.40
cienaCesPmExtendedTxRxHist24HBinTxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.41
cienaCesPmExtendedTxRxHist24HBinRxLOutRangePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.42
cienaCesPmExtendedTxRxAllTimeBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.1.5
cienaCesPmExtendedTxRxAllTimeBinEntry
Description and OID
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1
cienaCesPmExtendedTxRxAllTimeBinRxBytes
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-40 CIENA-CES-PM
cienaCesPmExtendedTxRxAllTimeBinRxPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The total number of multicast packets received for the given PM instance.
current
read-only
Status
Access
current
read-only
Status
Access
The total number of packets received that were less than 64 octets long
(excluding framing bits, but including FCS octets) and were otherwise well
formed.
current
read-only
Status
Access
The total number of packets received that were longer than 1518 octets but
less than or equal to the MTU (excluding framing bits, but including FCS
octets) and were otherwise well formed.
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.2
cienaCesPmExtendedTxRxAllTimeBinRxCrcErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.3
cienaCesPmExtendedTxRxAllTimeBinRxMcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.4
cienaCesPmExtendedTxRxAllTimeBinRxBcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.5
cienaCesPmExtendedTxRxAllTimeBinUndersizePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.6
cienaCesPmExtendedTxRxAllTimeBinOversizePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-41
cienaCesPmExtendedTxRxAllTimeBinFragmentsPkts
Description and OID
Status
Access
The total number of packets received that were less than 64 octets in length current
(excluding framing bits but including FCS octets) and had either a bad Frame
Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad
FCS with a non-integral number of octets (Alignment Error).
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.8
cienaCesPmExtendedTxRxAllTimeBinJabbersPkts
Description and OID
Status
Access
current
The total number of packets received that were longer than 1518 octets
(excluding framing bits, but including FCS octets), and had either a bad Frame
Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad
FCS with a non-integral number of octets (Alignment Error).
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.9
cienaCesPmExtendedTxRxAllTimeBin64OctsPkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that were 64
octets in length (excluding framing bits but including FCS octets).
current
read-only
Status
Access
The total number of packets (including bad packets) received that were
between 65 and 127 octets in length inclusive (excluding framing bits but
including FCS octets).
current
read-only
Status
Access
The total number of packets (including bad packets) received that were
between 128 and 255 octets in length inclusive (excluding framing bits but
including FCS octets).
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.10
cienaCesPmExtendedTxRxAllTimeBin65To127OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.11
cienaCesPmExtendedTxRxAllTimeBin128To255OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-42 CIENA-CES-PM
cienaCesPmExtendedTxRxAllTimeBin256To511OctsPkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that were
between 256 and 511 octets in length inclusive (excluding framing bits but
including FCS octets).
current
read-only
Status
Access
The total number of packets (including bad packets) received that were
between 512 and 1023 octets in length inclusive (excluding framing bits but
including FCS octets).
current
read-only
Status
Access
current
The total number of packets (including bad packets) received that were
between 1024 and 1518 octets in length inclusive (excluding framing bits but
including FCS octets).
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.13
cienaCesPmExtendedTxRxAllTimeBin512To1023OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.14
cienaCesPmExtendedTxRxAllTimeBin1024To1518OctsPkts
Description and OID
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.15
cienaCesPmExtendedTxRxAllTimeBinTxBytes
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.16
cienaCesPmExtendedTxRxAllTimeBinTxTBytes
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.17
cienaCesPmExtendedTxRxAllTimeBinTxPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.18
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-43
cienaCesPmExtendedTxRxAllTimeBinTxBcastPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.19
cienaCesPmExtendedTxRxAllTimeBinTxMcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.20
cienaCesPmExtendedTxRxAllTimeBinTxExDeferPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.21
cienaCesPmExtendedTxRxAllTimeBinTxGiantPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.22
cienaCesPmExtendedTxRxAllTimeBinTxUnderRunPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.23
cienaCesPmExtendedTxRxAllTimeBinTxCrcErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.24
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-44 CIENA-CES-PM
cienaCesPmExtendedTxRxAllTimeBinTxLCheckErrorPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.25
cienaCesPmExtendedTxRxAllTimeBinTxLOutRangePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.26
cienaCesPmExtendedTxRxAllTimeBinTxLateCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.27
cienaCesPmExtendedTxRxAllTimeBinTxExCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.28
cienaCesPmExtendedTxRxAllTimeBinTxSingleCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.29
cienaCesPmExtendedTxRxAllTimeBinTxCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.30
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-45
cienaCesPmExtendedTxRxAllTimeBinDropEvents
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.31
cienaCesPmExtendedTxRxAllTimeBinInDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.32
cienaCesPmExtendedTxRxAllTimeBinTxPausePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.33
cienaCesPmExtendedTxRxAllTimeBinRxPausePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.34
cienaCesPmExtendedTxRxAllTimeBinRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.35
cienaCesPmExtendedTxRxAllTimeBinRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.36
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-46 CIENA-CES-PM
cienaCesPmExtendedTxRxAllTimeBinTxBytesPerSec
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The total number of packets received that were longer than the MTU
(excluding framing bits, but including FCS octets) and were otherwise well
formed.
current
read-only
Status
Access
The (conceptual) read-only table listing the basic TxRx profile statistics.
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.37
cienaCesPmExtendedTxRxAllTimeBinTxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.38
cienaCesPmExtendedTxRxAllTimeBinRxLOutRangePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.39
cienaCesPmBasicTxRxHistoryBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.2.1
cienaCesPmBasicTxRxHistoryBinEntry
Description and OID
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-47
cienaCesPmBasicTxRxHistoryBinIndex
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.1
cienaCesPmBasicTxRxHistoryBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.2
cienaCesPmBasicTxRxHistoryBinEndTime
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.3
cienaCesPmBasicTxRxHistoryBinClearTime
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.4
cienaCesPmBasicTxRxHistoryBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.5
cienaCesPmBasicTxRxHistoryBinState
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-48 CIENA-CES-PM
cienaCesPmBasicTxRxHistoryBinRxAcceptedBytes
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.7
cienaCesPmBasicTxRxHistoryBinRxAcceptedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.8
cienaCesPmBasicTxRxHistoryBinRxYellowBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.9
cienaCesPmBasicTxRxHistoryBinRxYellowFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.10
cienaCesPmBasicTxRxHistoryBinRxDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.11
cienaCesPmBasicTxRxHistoryBinRxDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-49
cienaCesPmBasicTxRxHistoryBinTxForwardedBytes
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.13
cienaCesPmBasicTxRxHistoryBinTxForwardedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.14
cienaCesPmBasicTxRxHistoryBinRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.15
cienaCesPmBasicTxRxHistoryBinRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.16
cienaCesPmBasicTxRxHistoryBinTxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.17
cienaCesPmBasicTxRxHistoryBinTxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.18
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-50 CIENA-CES-PM
cienaCesPmBasicTxRxCurrBinTable
Description and OID
Status
Access
The (conceptual) read-only table listing the basic TxRx profile statistics.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.2.2
cienaCesPmBasicTxRxCurrBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1
cienaCesPmBasicTxRxCurrBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.1
cienaCesPmBasicTxRxCurrBinClearedTime
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.2
cienaCesPmBasicTxRxCurrBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.3
cienaCesPmBasicTxRxCurrBinState
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-51
cienaCesPmBasicTxRxCurrBinRxAcceptedBytes
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.5
cienaCesPmBasicTxRxCurrBinRxAcceptedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.6
cienaCesPmBasicTxRxCurrBinRxYellowBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.7
cienaCesPmBasicTxRxCurrBinRxYellowFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.8
cienaCesPmBasicTxRxCurrBinRxDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.9
cienaCesPmBasicTxRxCurrBinRxDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-52 CIENA-CES-PM
cienaCesPmBasicTxRxCurrBinTxForwardedBytes
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.11
cienaCesPmBasicTxRxCurrBinTxForwardedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.12
cienaCesPmBasicTxRxCurrBinRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.13
cienaCesPmBasicTxRxCurrBinRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.14
cienaCesPmBasicTxRxCurrBinTxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.15
cienaCesPmBasicTxRxCurrBinTxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.16
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-53
cienaCesPmBasicTxRxCurr24HBinTable
Description and OID
Status
Access
The (conceptual) read-only Table listing the basic TxRx profile statistics.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.2.3
cienaCesPmBasicTxRxCurr24HBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1
cienaCesPmBasicTxRxCurr24HBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.1
cienaCesPmBasicTxRxCurr24HBinEndTime
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.2
cienaCesPmBasicTxRxCurr24HBinClearedTime
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.3
cienaCesPmBasicTxRxCurr24HBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-54 CIENA-CES-PM
cienaCesPmBasicTxRxCurr24HBinState
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.5
cienaCesPmBasicTxRxCurr24HBinRxAcceptedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.6
cienaCesPmBasicTxRxCurr24HBinRxAcceptedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.7
cienaCesPmBasicTxRxCurr24HBinRxYellowBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.8
cienaCesPmBasicTxRxCurr24HBinRxYellowFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.9
cienaCesPmBasicTxRxCurr24HBinRxDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-55
cienaCesPmBasicTxRxCurr24HBinRxDroppedFrames
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.11
cienaCesPmBasicTxRxCurr24HBinTxForwardedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.12
cienaCesPmBasicTxRxCurr24HBinTxForwardedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.13
cienaCesPmBasicTxRxCurr24HBinRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.14
cienaCesPmBasicTxRxCurr24HBinRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.15
cienaCesPmBasicTxRxCurr24HBinTxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.16
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-56 CIENA-CES-PM
cienaCesPmBasicTxRxCurr24HBinTxFramesPerSec
Description and OID
Status
Access
current
read-only
Status
Access
The (conceptual) read-only table listing the basic TxRx profile statistics.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.17
cienaCesPmBasicTxRxHist24HBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.2.4
cienaCesPmBasicTxRxHist24HBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1
cienaCesPmBasicTxRxHist24HBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.1
cienaCesPmBasicTxRxHist24HBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.2
cienaCesPmBasicTxRxHist24HBinState
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-57
cienaCesPmBasicTxRxHist24HBinBasicRxAcceptedBytes
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.4
cienaCesPmBasicTxRxHist24HBinBasicRxAcceptedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.5
cienaCesPmBasicTxRxHist24HBinBasicRxYellowBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.6
cienaCesPmBasicTxRxHist24HBinBasicRxYellowFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.7
cienaCesPmBasicTxRxHist24HBinBasicRxDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.8
cienaCesPmBasicTxRxHist24HBinBasicRxDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-58 CIENA-CES-PM
cienaCesPmBasicTxRxHist24HBinBasicTxForwardedBytes
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.10
cienaCesPmBasicTxRxHist24HBinBasicTxForwardedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.11
cienaCesPmBasicTxRxHist24HBinBasicRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.12
cienaCesPmBasicTxRxHist24HBinBasicRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.13
cienaCesPmBasicTxRxHist24HBinBasicTxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.14
cienaCesPmBasicTxRxHist24HBinBasicTxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.15
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-59
cienaCesPmBasicTxRxAllTimeBinTable
Description and OID
Status
Access
The (conceptual) read-only table listing the basic TxRx profile statistics.
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.3.1.2.3.2.5
cienaCesPmBasicTxRxAllTimeBinEntry
Description and OID
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.2.5.1
cienaCesPmBasicTxRxAllTimeBinBasicRxAcceptedBytes
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.2.5.1.1
cienaCesPmBasicTxRxAllTimeBinBasicRxAcceptedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.5.1.2
cienaCesPmBasicTxRxAllTimeBinBasicRxYellowBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.5.1.3
cienaCesPmBasicTxRxAllTimeBinBasicRxYellowFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.5.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-60 CIENA-CES-PM
cienaCesPmBasicTxRxAllTimeBinBasicRxDroppedBytes
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.2.5.1.5
cienaCesPmBasicTxRxAllTimeBinBasicRxDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.5.1.6
cienaCesPmBasicTxRxAllTimeBinBasicTxForwardedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.5.1.7
cienaCesPmBasicTxRxAllTimeBinBasicTxForwardedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.5.1.8
cienaCesPmBasicTxRxAllTimeBinBasicRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.5.1.9
cienaCesPmBasicTxRxAllTimeBinBasicRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.5.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-61
cienaCesPmBasicTxRxAllTimeBinBasicTxBytesPerSec
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.3.1.2.3.2.5.1.11
cienaCesPmBasicTxRxAllTimeBinBasicTxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.5.1.12
cienaCesPmIGMPHistoryBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.3.1
cienaCesPmIGMPHistoryBinEntry
Description and OID
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1
cienaCesPmIGMPHistoryBinIndex
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.1
cienaCesPmIGMPHistoryBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-62 CIENA-CES-PM
cienaCesPmIGMPHistoryBinEndTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.3
cienaCesPmIGMPHistoryBinClearTime
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.4
cienaCesPmIGMPHistoryBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.5
cienaCesPmIGMPHistoryBinState
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.6
cienaCesPmIGMPHistoryBinIgmpnumJoins
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.7
cienaCesPmIGMPHistoryBinIgmpnumLeaves
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-63
cienaCesPmIGMPHistoryBinIgmpnumQueries
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.9
cienaCesPmIGMPHistoryBinIgmpnumQueryDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.10
cienaCesPmIGMPHistoryBinIgmpnumQueryDiscardsQueryCameTooSoon
Description and OID
Status
Access
The total number of queries discarded because the queries came too soon.
current
read-only
Status
Access
The total number queries discarded because the port was down.
current
read-only
Status
Access
The total number of queries discarded because the port was blocked.
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.11
cienaCesPmIGMPHistoryBinIgmpnumQueryDiscardsPortDown
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.12
cienaCesPmIGMPHistoryBinIgmpnumQueryDiscardsPortBlock
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.13
cienaCesPmIGMPHistoryBinIgmpnumQueryDiscardsLiNoServerLI
Description and OID
Status
Access
The total number of queries discarded because of no server logical interfaces. current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.14
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-64 CIENA-CES-PM
cienaCesPmIGMPHistoryBinIgmpnumQueryTimeouts
Description and OID
Status
Access
The total number of timeouts waiting for the router to send query.
current
read-only
Status
Access
current
read-only
Status
Access
The total number of messages discarded by the router. This happens when a current
join comes in from a router port.
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.15
cienaCesPmIGMPHistoryBinIgmpnumReplyTimeouts
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.16
cienaCesPmIGMPHistoryBinIgmpnumRouterDiscards
Description and OID
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.17
cienaCesPmIGMPHistoryBinIgmpnumHostDiscards
Description and OID
Status
Access
The total number of messages discarded by the host. This happens when a
join or leave comes in a port, but no router port is established.
current
read-only
Status
Access
current
read-only
Status
Access
The total number of IGMP Layer 2 and Layer 3 mismatch packets received.
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.18
cienaCesPmIGMPHistoryBinIgmpnumBadChecksum
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.19
cienaCesPmIGMPHistoryBinIgmpnumL2L3Mismatch
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.20
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-65
cienaCesPmIGMPHistoryBinIgmpnumUnknownPktType
Description and OID
Status
Access
current
read-only
Status
Access
The total number of IGMP packets discarded because there were not enough current
resources to process these messages. This could happen when the rate of the
incoming IGMP messages is very high.
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.21
cienaCesPmIGMPHistoryBinIgmpnumResourceExceed
Description and OID
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.22
cienaCesPmIGMPHistoryBinIgmpnumQueryDiscardsSrcIpZero
Description and OID
Status
Access
The total number of queries discarded because they had zero source IP.
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.23
cienaCesPmIGMPCurrBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.3.2
cienaCesPmIGMPCurrBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1
cienaCesPmIGMPCurrBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-66 CIENA-CES-PM
cienaCesPmIGMPCurrBinClearedTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.2
cienaCesPmIGMPCurrBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.3
cienaCesPmIGMPCurrBinState
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.4
cienaCesPmIGMPCurrBinIgmpnumJoins
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.5
cienaCesPmIGMPCurrBinIgmpnumLeaves
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.6
cienaCesPmIGMPCurrBinIgmpnumQueries
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-67
cienaCesPmIGMPCurrBinIgmpnumQueryDiscards
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.8
cienaCesPmIGMPCurrBinIgmpnumQueryDiscardsQueryCameTooSoon
Description and OID
Status
Access
The total number of queries discarded because the queries came too soon.
current
read-only
Status
Access
The total number queries discarded because the port was down.
current
read-only
Status
Access
The total number of queries discarded because the port was blocked.
current
read-only
Status
Access
current
read-only
Status
Access
The total number of timeouts waiting for the router to send query.
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.9
cienaCesPmIGMPCurrBinIgmpnumQueryDiscardsPortDown
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.10
cienaCesPmIGMPCurrBinIgmpnumQueryDiscardsPortBlock
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.11
cienaCesPmIGMPCurrBinIgmpnumQueryDiscardsLiNoServerLI
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.12
cienaCesPmIGMPCurrBinIgmpnumQueryTimeouts
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.13
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-68 CIENA-CES-PM
cienaCesPmIGMPCurrBinIgmpnumReplyTimeouts
Description and OID
Status
Access
current
read-only
Status
Access
The total number of messages discarded by the router. This happens when a current
join comes in from a router port.
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.14
cienaCesPmIGMPCurrBinIgmpnumRouterDiscards
Description and OID
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.15
cienaCesPmIGMPCurrBinIgmpnumHostDiscards
Description and OID
Status
Access
The total number of messages discarded by the host. This happens when a
join or leave comes in a port, but no router port is established.
current
read-only
Status
Access
current
read-only
Status
Access
The total number of IGMP Layer 2 and Layer 3 mismatch packets received.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.16
cienaCesPmIGMPCurrBinIgmpnumBadChecksum
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.17
cienaCesPmIGMPCurrBinIgmpnumL2L3Mismatch
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.18
cienaCesPmIGMPCurrBinIgmpnumUnknownPktType
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.19
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-69
cienaCesPmIGMPCurrBinIgmpnumResourceExceed
Description and OID
Status
Access
The total number of IGMP packets discarded because there were not enough current
resources to process these messages. This could happen when the rate of the
incoming IGMP messages is very high.
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.20
cienaCesPmIGMPCurrBinIgmpnumQueryDiscardsSrcIpZero
Description and OID
Status
Access
The total number of queries discarded because they had zero source IP.
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.21
cienaCesPmIGMPCurr24HBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.3.3
cienaCesPmIGMPCurr24HBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1
cienaCesPmIGMPCurr24HBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.1
cienaCesPmIGMPCurr24HBinEndTime
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-70 CIENA-CES-PM
cienaCesPmIGMPCurr24HBinClearedTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.3
cienaCesPmIGMPCurr24HBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.4
cienaCesPmIGMPCurr24HBinState
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.5
cienaCesPmIGMPCurr24HBinIgmpnumJoins
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.6
cienaCesPmIGMPCurr24HBinIgmpnumLeaves
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.7
cienaCesPmIGMPCurr24HBinIgmpnumQueries
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-71
cienaCesPmIGMPCurr24HBinIgmpnumQueryDiscards
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.9
cienaCesPmIGMPCurr24HBinIgmpnumQueryDiscardsQueryCameTooSoon
Description and OID
Status
Access
The total number of queries discarded because the queries came too soon.
current
read-only
Status
Access
The total number queries discarded because the port was down.
current
read-only
Status
Access
The total number of queries discarded because the port was blocked.
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.10
cienaCesPmIGMPCurr24HBinIgmpnumQueryDiscardsPortDown
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.11
cienaCesPmIGMPCurr24HBinIgmpnumQueryDiscardsPortBlock
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.12
cienaCesPmIGMPCurr24HBinIgmpnumQueryDiscardsLiNoServerLI
Description and OID
Status
Access
The total number of queries discarded because of no server logical interfaces. current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.13
cienaCesPmIGMPCurr24HBinIgmpnumQueryTimeouts
Description and OID
Status
Access
The total number of timeouts waiting for the router to send query.
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.14
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-72 CIENA-CES-PM
cienaCesPmIGMPCurr24HBinIgmpnumReplyTimeouts
Description and OID
Status
Access
current
read-only
Status
Access
The total number of messages discarded by the router. This happens when a current
join comes in from a router port.
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.15
cienaCesPmIGMPCurr24HBinIgmpnumRouterDiscards
Description and OID
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.16
cienaCesPmIGMPCurr24HBinIgmpnumHostDiscards
Description and OID
Status
Access
The total number of messages discarded by the host. This happens when a
join or leave comes in a port, but no router port is established.
current
read-only
Status
Access
current
read-only
Status
Access
The total number of IGMP Layer 2 and Layer 3 mismatch packets received.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.17
cienaCesPmIGMPCurr24HBinIgmpnumBadChecksum
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.18
cienaCesPmIGMPCurr24HBinIgmpnumL2L3Mismatch
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.19
cienaCesPmIGMPCurr24HBinIgmpnumUnknownPktType
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.20
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-73
cienaCesPmIGMPCurr24HBinIgmpnumResourceExceed
Description and OID
Status
Access
The total number of IGMP packets discarded because there were not enough current
resources to process these messages. This could happen when the rate of the
incoming IGMP messages is very high.
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.21
cienaCesPmIGMPCurr24HBinIgmpnumQueryDiscardsSrcIpZero
Description and OID
Status
Access
The total number of queries discarded because they had zero source IP.
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.22
cienaCesPmIGMPHist24HBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.3.4
cienaCesPmIGMPHist24HBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1
cienaCesPmIGMPHist24HBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.1
cienaCesPmIGMPHist24HBinEndTime
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-74 CIENA-CES-PM
cienaCesPmIGMPHist24HBinDuration
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.3
cienaCesPmIGMPHist24HBinState
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.4
cienaCesPmIGMPHist24HBinIgmpnumJoins
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.5
cienaCesPmIGMPHist24HBinIgmpnumLeaves
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.6
cienaCesPmIGMPHist24HBinIgmpnumQueries
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.7
cienaCesPmIGMPHist24HBinIgmpnumQueryDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-75
cienaCesPmIGMPHist24HBinIgmpnumQueryDiscardsQueryCameTooSoon
Description and OID
Status
Access
The total number of queries discarded because the queries came too soon.
current
read-only
Status
Access
The total number queries discarded because the port was down.
current
read-only
Status
Access
The total number of queries discarded because the port was blocked.
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.9
cienaCesPmIGMPHist24HBinIgmpnumQueryDiscardsPortDown
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.10
cienaCesPmIGMPHist24HBinIgmpnumQueryDiscardsPortBlock
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.11
cienaCesPmIGMPHist24HBinIgmpnumQueryDiscardsLiNoServerLI
Description and OID
Status
Access
The total number of queries discarded because of no server logical interfaces. current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.12
cienaCesPmIGMPHist24HBinIgmpnumQueryTimeouts
Description and OID
Status
Access
The total number of timeouts waiting for the router to send query.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.13
cienaCesPmIGMPHist24HBinIgmpnumReplyTimeouts
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.14
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-76 CIENA-CES-PM
cienaCesPmIGMPHist24HBinIgmpnumRouterDiscards
Description and OID
Status
Access
The total number of messages discarded by the router. This happens when a current
join comes in from a router port.
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.15
cienaCesPmIGMPHist24HBinIgmpnumHostDiscards
Description and OID
Status
Access
The total number of messages discarded by the host. This happens when a
join or leave comes in a port, but no router port is established.
current
read-only
Status
Access
current
read-only
Status
Access
The total number of IGMP Layer 2 and Layer 3 mismatch packets received.
current
read-only
Status
Access
current
read-only
Status
Access
The total number of IGMP packets discarded because there were not enough current
resources to process these messages. This could happen when the rate of the
incoming IGMP messages is very high.
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.16
cienaCesPmIGMPHist24HBinIgmpnumBadChecksum
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.17
cienaCesPmIGMPHist24HBinIgmpnumL2L3Mismatch
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.18
cienaCesPmIGMPHist24HBinIgmpnumUnknownPktType
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.19
cienaCesPmIGMPHist24HBinIgmpnumResourceExceed
Description and OID
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.20
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-77
cienaCesPmIGMPHist24HBinIgmpnumQueryDiscardsSrcIpZero
Description and OID
Status
Access
The total number of queries discarded because they had zero source IP.
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.21
cienaCesPmIGMPAllTimeBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.3.5
cienaCesPmIGMPAllTimeBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1
cienaCesPmIGMPAllTimeBinIgmpnumJoins
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.1
cienaCesPmIGMPAllTimeBinIgmpnumLeaves
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.2
cienaCesPmIGMPAllTimeBinIgmpnumQueries
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-78 CIENA-CES-PM
cienaCesPmIGMPAllTimeBinIgmpnumQueryDiscards
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.4
cienaCesPmIGMPAllTimeBinIgmpnumQueryDiscardsQueryCameTooSoon
Description and OID
Status
Access
The total number of queries discarded because the queries came too soon.
current
read-only
Status
Access
The total number queries discarded because the port was down.
current
read-only
Status
Access
The total number of queries discarded because the port was blocked.
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.5
cienaCesPmIGMPAllTimeBinIgmpnumQueryDiscardsPortDown
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.6
cienaCesPmIGMPAllTimeBinIgmpnumQueryDiscardsPortBlock
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.7
cienaCesPmIGMPAllTimeBinIgmpnumQueryDiscardsLiNoServerLI
Description and OID
Status
Access
The total number of queries discarded because of no server logical interfaces. current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.8
cienaCesPmIGMPAllTimeBinIgmpnumQueryTimeouts
Description and OID
Status
Access
The total number of timeouts waiting for the router to send query.
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-79
cienaCesPmIGMPAllTimeBinIgmpnumReplyTimeouts
Description and OID
Status
Access
current
read-only
Status
Access
The total number of messages discarded by the router. This happens when a current
join comes in from a router port.
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.10
cienaCesPmIGMPAllTimeBinIgmpnumRouterDiscards
Description and OID
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.11
cienaCesPmIGMPAllTimeBinIgmpnumHostDiscards
Description and OID
Status
Access
The total number of messages discarded by the host. This happens when a
join or leave comes in a port, but no router port is established.
current
read-only
Status
Access
current
read-only
Status
Access
The total number of IGMP Layer 2 and Layer 3 mismatch packets received.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.12
cienaCesPmIGMPAllTimeBinIgmpnumBadChecksum
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.13
cienaCesPmIGMPAllTimeBinIgmpnumL2L3Mismatch
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.14
cienaCesPmIGMPAllTimeBinIgmpnumUnknownPktType
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.15
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-80 CIENA-CES-PM
cienaCesPmIGMPAllTimeBinIgmpnumResourceExceed
Description and OID
Status
Access
The total number of IGMP packets discarded because there were not enough current
resources to process these messages. This could happen when the rate of the
incoming IGMP messages is very high.
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.16
cienaCesPmIGMPAllTimeBinIgmpnumQueryDiscardsSrcIpZero
Description and OID
Status
Access
The total number of queries discarded because they had zero source IP.
current
read-only
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.17
cienaCesPmAccessHistoryBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.4.1
cienaCesPmAccessHistoryBinEntry
Description and OID
current
An entry (conceptual row) in the cienaPortPmAccessHistoryBinTable. This
table lists the statistics for all the history bins of the PM instance, as specified
by the bin-count object of the PM instance. History bins are displayed in the
order so that #1 bin always represents the most recently completed bin and #2
- the bin previous to that and so on. The statistics are displayed for only the
instances with valid bins (with start time >0), as indicated by the operational
state of the corresponding PM instance.
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.4.1.1
cienaCesPmAccessHistoryBinIndex
Description and OID
Status
Access
current
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.4.1.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-81
cienaCesPmAccessHistoryBinStartTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The total number of access hit bytes for the history bin.
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.4.1.1.2
cienaCesPmAccessHistoryBinEndTime
1.3.6.1.4.1.1271.2.3.1.2.3.4.1.1.3
cienaCesPmAccessHistoryBinClearTime
1.3.6.1.4.1.1271.2.3.1.2.3.4.1.1.4
cienaCesPmAccessHistoryBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.4.1.1.5
cienaCesPmAccessHistoryBinState
1.3.6.1.4.1.1271.2.3.1.2.3.4.1.1.6
cienaCesPmAccessHistoryBinAccessHitBytes
1.3.6.1.4.1.1271.2.3.1.2.3.4.1.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-82 CIENA-CES-PM
cienaCesPmAccessHistoryBinAccessHitFrames
Description and OID
Status
Access
The total number of access hit frames for the history bin.
current
read-only
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.3.1.2.3.4.1.1.8
cienaCesPmAccessCurrBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.4.2
cienaCesPmAccessCurrBinEntry
Description and OID
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.4.2.1
cienaCesPmAccessCurrBinStartTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.4.2.1.1
cienaCesPmAccessCurrBinClearedTime
1.3.6.1.4.1.1271.2.3.1.2.3.4.2.1.2
cienaCesPmAccessCurrBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.4.2.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-83
cienaCesPmAccessCurrBinState
Description and OID
Status
Access
current
read-only
Status
Access
The total number of access hit bytes for the current bin.
current
read-only
Status
Access
The total number of access hit frames for the current bin.
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.4.2.1.4
cienaCesPmAccessCurrBinAccessHitBytes
1.3.6.1.4.1.1271.2.3.1.2.3.4.2.1.5
cienaCesPmAccessCurrBinAccessHitFrames
1.3.6.1.4.1.1271.2.3.1.2.3.4.2.1.6
cienaCesPmAccessCurr24HBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.4.3
cienaCesPmAccessCurr24HBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.4.3.1
cienaCesPmAccessCurr24HBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.4.3.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-84 CIENA-CES-PM
cienaCesPmAccessCurr24HBinEndTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The total number of access hit bytes for the 24 hours bin.
current
read-only
Status
Access
The total number of access hit frames for the 24 hours bin.
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.4.3.1.2
cienaCesPmAccessCurr24HBinClearedTime
1.3.6.1.4.1.1271.2.3.1.2.3.4.3.1.3
cienaCesPmAccessCurr24HBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.4.3.1.4
cienaCesPmAccessCurr24HBinState
1.3.6.1.4.1.1271.2.3.1.2.3.4.3.1.5
cienaCesPmAccessCurr24HBinAccessHitBytes
1.3.6.1.4.1.1271.2.3.1.2.3.4.3.1.6
cienaCesPmAccessCurr24HBinAccessHitFrames
1.3.6.1.4.1.1271.2.3.1.2.3.4.3.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-85
cienaCesPmAccessHist24HBinTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The total number of access hit bytes for the history 24 hours bin.
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.4.4
cienaCesPmAccessHist24HBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.4.4.1
cienaCesPmAccessHist24HBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.4.4.1.1
cienaCesPmAccessHist24HBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.4.4.1.2
cienaCesPmAccessHist24HBinState
1.3.6.1.4.1.1271.2.3.1.2.3.4.4.1.3
cienaCesPmAccessHist24HBinAccessHitBytes
1.3.6.1.4.1.1271.2.3.1.2.3.4.4.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-86 CIENA-CES-PM
cienaCesPmAccessHist24HBinAccessHitFrames
Description and OID
Status
Access
The total number of access hit frames for the history 24 hours bin.
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The total number of access hit bytes for the All Time bin.
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.4.4.1.5
cienaCesPmAccessAllTimeBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.4.5
cienaCesPmAccessAllTimeBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.4.5.1
cienaCesPmAccessAllTimeBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.4.5.1.1
cienaCesPmAccessAllTimeBinState
1.3.6.1.4.1.1271.2.3.1.2.3.4.5.1.2
cienaCesPmAccessAllTimeBinAccessHitBytes
1.3.6.1.4.1.1271.2.3.1.2.3.4.5.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-87
cienaCesPmAccessAllTimeBinAccessHitFrames
Description and OID
Status
Access
The total number of access hit frames for the All Time bin.
current
read-only
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.3.1.2.3.4.5.1.4
cienaCesPmFloodContainerHistoryBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.5.1
cienaCesPmFloodContainerHistoryBinEntry
Description and OID
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.5.1.1
cienaCesPmFloodContainerHistoryBinIndex
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.5.1.1.1
cienaCesPmFloodContainerHistoryBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.5.1.1.2
cienaCesPmFloodContainerHistoryBinEndTime
1.3.6.1.4.1.1271.2.3.1.2.3.5.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-88 CIENA-CES-PM
cienaCesPmFloodContainerHistoryBinClearTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.5.1.1.4
cienaCesPmFloodContainerHistoryBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.5.1.1.5
cienaCesPmFloodContainerHistoryBinState
1.3.6.1.4.1.1271.2.3.1.2.3.5.1.1.6
cienaCesPmFloodContainerHistoryBinBcastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.5.1.1.7
cienaCesPmFloodContainerHistoryBinBcastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.5.1.1.8
cienaCesPmFloodContainerHistoryBinL2McastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.5.1.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-89
cienaCesPmFloodContainerHistoryBinL2McastDroppedFrames
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.5.1.1.10
cienaCesPmFloodContainerHistoryBinUnknownUnicastDroppedBytes
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.5.1.1.11
cienaCesPmFloodContainerHistoryBinUnknownUnicastDroppedFrames
Description and OID
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.5.1.1.12
cienaCesPmFloodContainerCurrBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.5.2
cienaCesPmFloodContainerCurrBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.5.2.1
cienaCesPmFloodContainerCurrBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.5.2.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-90 CIENA-CES-PM
cienaCesPmFloodContainerCurrBinClearedTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.5.2.1.2
cienaCesPmFloodContainerCurrBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.5.2.1.3
cienaCesPmFloodContainerCurrBinState
1.3.6.1.4.1.1271.2.3.1.2.3.5.2.1.4
cienaCesPmFloodContainerCurrBinBcastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.5.2.1.5
cienaCesPmFloodContainerCurrBinBcastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.5.2.1.6
cienaCesPmFloodContainerCurrBinL2McastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.5.2.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-91
cienaCesPmFloodContainerCurrBinL2McastDroppedFrames
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.5.2.1.8
cienaCesPmFloodContainerCurrBinUnknownUnicastDroppedBytes
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.5.2.1.9
cienaCesPmFloodContainerCurrBinUnknownUnicastDroppedFrames
Description and OID
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.5.2.1.10
cienaCesPmFloodContainerCurr24HBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.5.3
cienaCesPmFloodContainerCurr24HBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.5.3.1
cienaCesPmFloodContainerCurr24HBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.5.3.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-92 CIENA-CES-PM
cienaCesPmFloodContainerCurr24HBinEndTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.5.3.1.2
cienaCesPmFloodContainerCurr24HBinClearedTime
1.3.6.1.4.1.1271.2.3.1.2.3.5.3.1.3
cienaCesPmFloodContainerCurr24HBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.5.3.1.4
cienaCesPmFloodContainerCurr24HBinState
1.3.6.1.4.1.1271.2.3.1.2.3.5.3.1.5
cienaCesPmFloodContainerCurr24HBinBcastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.5.3.1.6
cienaCesPmFloodContainerCurr24HBinBcastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.5.3.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-93
cienaCesPmFloodContainerCurr24HBinL2McastDroppedBytes
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.5.3.1.8
cienaCesPmFloodContainerCurr24HBinL2McastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.5.3.1.9
cienaCesPmFloodContainerCurr24HBinUnknownUnicastDroppedBytes
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.5.3.1.10
cienaCesPmFloodContainerCurr24HBinUnknownUnicastDroppedFrames
Description and OID
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.5.3.1.11
cienaCesPmFloodContainerHist24HBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.5.4
cienaCesPmFloodContainerHist24HBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.5.4.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-94 CIENA-CES-PM
cienaCesPmFloodContainerHist24HBinStartTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.5.4.1.1
cienaCesPmFloodContainerHist24HBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.5.4.1.2
cienaCesPmFloodContainerHist24HBinState
1.3.6.1.4.1.1271.2.3.1.2.3.5.4.1.3
cienaCesPmFloodContainerHist24HBinBcastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.5.4.1.4
cienaCesPmFloodContainerHist24HBinBcastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.5.4.1.5
cienaCesPmFloodContainerHist24HBinL2McastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.5.4.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-95
cienaCesPmFloodContainerHist24HBinL2McastDroppedFrames
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.5.4.1.7
cienaCesPmFloodContainerHist24HBinUnknownUnicastDroppedBytes
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.5.4.1.8
cienaCesPmFloodContainerHist24HBinUnknownUnicastDroppedFrames
Description and OID
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.5.4.1.9
cienaCesPmFloodContainerAllTimeBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.5.5
cienaCesPmFloodContainerAllTimeBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.5.5.1
cienaCesPmFloodContainerAllTimeBinBcastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.5.5.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-96 CIENA-CES-PM
cienaCesPmFloodContainerAllTimeBinBcastDroppedFrames
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.5.5.1.2
cienaCesPmFloodContainerAllTimeBinL2McastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.5.5.1.3
cienaCesPmFloodContainerAllTimeBinL2McastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.5.5.1.4
cienaCesPmFloodContainerAllTimeBinUnknownUnicastDroppedBytes
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.5.5.1.5
cienaCesPmFloodContainerAllTimeBinUnknownUnicastDroppedFrames
Description and OID
Status
Access
current
read-only
Status
Access
The (conceptual) read-only table listing the basic TxRx profile statistics.
current
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.5.5.1.6
cienaCesPmBasicRxHistoryBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.6.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-97
cienaCesPmBasicRxHistoryBinEntry
Description and OID
Status
Access
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1
cienaCesPmBasicRxHistoryBinIndex
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.1
cienaCesPmBasicRxHistoryBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.2
cienaCesPmBasicRxHistoryBinEndTime
1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.3
cienaCesPmBasicRxHistoryBinClearTime
1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.4
cienaCesPmBasicRxHistoryBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-98 CIENA-CES-PM
cienaCesPmBasicRxHistoryBinState
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.6
cienaCesPmBasicRxHistoryBinBasicRxAcceptedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.7
cienaCesPmBasicRxHistoryBinBasicRxAcceptedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.8
cienaCesPmBasicRxHistoryBinBasicRxYellowBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.9
cienaCesPmBasicRxHistoryBinBasicRxYellowFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.10
cienaCesPmBasicRxHistoryBinBasicRxDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-99
cienaCesPmBasicRxHistoryBinBasicRxDroppedFrames
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.12
cienaCesPmBasicRxHistoryBinBasicRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.13
cienaCesPmBasicRxHistoryBinBasicRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.14
cienaCesPmBasicRxCurrBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.6.2
cienaCesPmBasicRxCurrBinEntry
Description and OID
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.6.2.1
cienaCesPmBasicRxCurrBinStartTime
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.6.2.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-100 CIENA-CES-PM
cienaCesPmBasicRxCurrBinClearedTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.6.2.1.2
cienaCesPmBasicRxCurrBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.6.2.1.3
cienaCesPmBasicRxCurrBinState
1.3.6.1.4.1.1271.2.3.1.2.3.6.2.1.4
cienaCesPmBasicRxCurrBinBasicRxAcceptedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.2.1.5
cienaCesPmBasicRxCurrBinBasicRxAcceptedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.2.1.6
cienaCesPmBasicRxCurrBinBasicRxYellowBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.2.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-101
cienaCesPmBasicRxCurrBinBasicRxYellowFrames
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The (conceptual) read-only table listing the basic TxRx profile statistics.
current
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.6.2.1.8
cienaCesPmBasicRxCurrBinBasicRxDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.2.1.9
cienaCesPmBasicRxCurrBinBasicRxDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.2.1.10
cienaCesPmBasicRxCurrBinBasicRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.6.2.1.11
cienaCesPmBasicRxCurrBinBasicRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.6.2.1.12
cienaCesPmBasicRxCurr24HBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.6.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-102 CIENA-CES-PM
cienaCesPmBasicRxCurr24HBinEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.6.3.1
cienaCesPmBasicRxCurr24HBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.6.3.1.1
cienaCesPmBasicRxCurr24HBinEndTime
1.3.6.1.4.1.1271.2.3.1.2.3.6.3.1.2
cienaCesPmBasicRxCurr24HBinClearedTime
1.3.6.1.4.1.1271.2.3.1.2.3.6.3.1.3
cienaCesPmBasicRxCurr24HBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.6.3.1.4
cienaCesPmBasicRxCurr24HBinState
1.3.6.1.4.1.1271.2.3.1.2.3.6.3.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-103
cienaCesPmBasicRxCurr24HBinBasicRxAcceptedBytes
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.6.3.1.6
cienaCesPmBasicRxCurr24HBinBasicRxAcceptedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.3.1.7
cienaCesPmBasicRxCurr24HBinBasicRxYellowBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.3.1.8
cienaCesPmBasicRxCurr24HBinBasicRxYellowFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.3.1.9
cienaCesPmBasicRxCurr24HBinBasicRxDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.3.1.10
cienaCesPmBasicRxCurr24HBinBasicRxDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.3.1.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-104 CIENA-CES-PM
cienaCesPmBasicRxCurr24HBinBasicRxBytesPerSec
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The (conceptual) read-only table listing the basic TxRx profile statistics.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.6.3.1.12
cienaCesPmBasicRxCurr24HBinBasicRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.6.3.1.13
cienaCesPmBasicRxHist24HBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.6.4
cienaCesPmBasicRxHist24HBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.6.4.1
cienaCesPmBasicRxHist24HBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.6.4.1.1
cienaCesPmBasicRxHist24HBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.6.4.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-105
cienaCesPmBasicRxHist24HBinState
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.6.4.1.3
cienaCesPmBasicRxHist24HBinBasicRxAcceptedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.4.1.4
cienaCesPmBasicRxHist24HBinBasicRxAcceptedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.4.1.5
cienaCesPmBasicRxHist24HBinBasicRxYellowBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.4.1.6
cienaCesPmBasicRxHist24HBinBasicRxYellowFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.4.1.7
cienaCesPmBasicRxHist24HBinBasicRxDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.4.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-106 CIENA-CES-PM
cienaCesPmBasicRxHist24HBinBasicRxDroppedFrames
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The (conceptual) read-only table listing the basic TxRx profile statistics.
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.3.1.2.3.6.4.1.9
cienaCesPmBasicRxHist24HBinBasicRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.6.4.1.10
cienaCesPmBasicRxHist24HBinBasicRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.6.4.1.11
cienaCesPmBasicRxAllTimeBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.6.5
cienaCesPmBasicRxAllTimeBinEntry
Description and OID
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.6.5.1
cienaCesPmBasicRxAllTimeBinBasicRxAcceptedBytes
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.6.5.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-107
cienaCesPmBasicRxAllTimeBinBasicRxAcceptedFrames
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.6.5.1.2
cienaCesPmBasicRxAllTimeBinBasicRxYellowBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.5.1.3
cienaCesPmBasicRxAllTimeBinBasicRxYellowFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.5.1.4
cienaCesPmBasicRxAllTimeBinBasicRxDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.5.1.5
cienaCesPmBasicRxAllTimeBinBasicRxDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.5.1.6
cienaCesPmBasicRxAllTimeBinBasicRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.6.5.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-108 CIENA-CES-PM
cienaCesPmBasicRxAllTimeBinBasicRxFramesPerSec
Description and OID
Status
Access
current
read-only
Status
Access
The (conceptual) read-only table listing the egress queue profile statistics.
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.3.1.2.3.6.5.1.8
cienaCesPmEgressQueueHistoryBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.7.1
cienaCesPmEgressQueueHistoryBinEntry
Description and OID
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.7.1.1
cienaCesPmEgressQueueHistoryBinIndex
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.7.1.1.1
cienaCesPmEgressQueueHistoryBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.7.1.1.2
cienaCesPmEgressQueueHistoryBinEndTime
1.3.6.1.4.1.1271.2.3.1.2.3.7.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-109
cienaCesPmEgressQueueHistoryBinClearTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The number of received unicast bytes that were dropped at egress on this PM current
instance.
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.7.1.1.4
cienaCesPmEgressQueueHistoryBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.7.1.1.5
cienaCesPmEgressQueueHistoryBinState
1.3.6.1.4.1.1271.2.3.1.2.3.7.1.1.6
cienaCesPmEgressQueueHistoryBinUnicastDroppedBytes
Description and OID
1.3.6.1.4.1.1271.2.3.1.2.3.7.1.1.7
cienaCesPmEgressQueueHistoryBinUnicastDroppedFrames
Description and OID
Status
Access
The number of received unicast frames that were dropped at egress on this PM current
instance.
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.7.1.1.8
cienaCesPmEgressQueueHistoryBinMulticastEnqueuedBytes
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.7.1.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-110 CIENA-CES-PM
cienaCesPmEgressQueueHistoryBinMulticastEnqueuedFrames
Description and OID
Status
Access
current
read-only
Status
Access
The number of multicast bytes that were dropped before being enqueued on
this PM instance.
current
read-only
Status
Access
The number of multicast frames that were dropped before being enqueued on current
this PM instance.
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.7.1.1.10
cienaCesPmEgressQueueHistoryBinMulticastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.7.1.1.11
cienaCesPmEgressQueueHistoryBinMulticastDroppedFrames
Description and OID
1.3.6.1.4.1.1271.2.3.1.2.3.7.1.1.12
cienaCesPmEgressQueueCurrBinTable
Description and OID
Status
Access
The (conceptual) read-only table listing the egress queue profile statistics.
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.3.1.2.3.7.2
cienaCesPmEgressQueueCurrBinEntry
Description and OID
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.7.2.1
cienaCesPmEgressQueueCurrBinStartTime
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.7.2.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-111
cienaCesPmEgressQueueCurrBinClearedTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The number of received unicast bytes that were dropped at egress on this PM current
instance.
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.7.2.1.2
cienaCesPmEgressQueueCurrBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.7.2.1.3
cienaCesPmEgressQueueCurrBinState
1.3.6.1.4.1.1271.2.3.1.2.3.7.2.1.4
cienaCesPmEgressQueueCurrBinUnicastDroppedBytes
Description and OID
1.3.6.1.4.1.1271.2.3.1.2.3.7.2.1.5
cienaCesPmEgressQueueCurrBinUnicastDroppedFrames
Description and OID
Status
Access
The number of received unicast frames that were dropped at egress on this PM current
instance.
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.7.2.1.6
cienaCesPmEgressQueueCurrBinMulticastEnqueuedBytes
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.7.2.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-112 CIENA-CES-PM
cienaCesPmEgressQueueCurrBinMulticastEnqueuedFrames
Description and OID
Status
Access
current
read-only
Status
Access
The number of multicast bytes that were dropped before being enqueued on
this PM instance.
current
read-only
Status
Access
The number of multicast frames that were dropped before being enqueued on current
this PM instance.
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.7.2.1.8
cienaCesPmEgressQueueCurrBinMulticastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.7.2.1.9
cienaCesPmEgressQueueCurrBinMulticastDroppedFrames
Description and OID
1.3.6.1.4.1.1271.2.3.1.2.3.7.2.1.10
cienaCesPmEgressQueueCurr24HBinTable
Description and OID
Status
Access
The (conceptual) read-only table listing the egress queue profile statistics
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.3.1.2.3.7.3
cienaCesPmEgressQueueCurr24HBinEntry
Description and OID
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.7.3.1
cienaCesPmEgressQueueCurr24HBinStartTime
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.7.3.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-113
cienaCesPmEgressQueueCurr24HBinEndTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The number of received unicast bytes that were dropped on this PM instance. current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.7.3.1.2
cienaCesPmEgressQueueCurr24HBinClearedTime
1.3.6.1.4.1.1271.2.3.1.2.3.7.3.1.3
cienaCesPmEgressQueueCurr24HBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.7.3.1.4
cienaCesPmEgressQueueCurr24HBinState
1.3.6.1.4.1.1271.2.3.1.2.3.7.3.1.5
cienaCesPmEgressQueueCurr24HBinUnicastDroppedBytes
Description and OID
1.3.6.1.4.1.1271.2.3.1.2.3.7.3.1.6
cienaCesPmEgressQueueCurr24HBinUnicastDroppedFrames
Description and OID
Status
Access
The number of received unicast frames that were dropped on this PM instance. current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.7.3.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-114 CIENA-CES-PM
cienaCesPmEgressQueueCurr24HBinMulticastEnqueuedBytes
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The (conceptual) read-only table listing the egress queue profile statistics.
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.3.1.2.3.7.3.1.8
cienaCesPmEgressQueueCurr24HBinMulticastEnqueuedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.7.3.1.9
cienaCesPmEgressQueueCurr24HBinMulticastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.7.3.1.10
cienaCesPmEgressQueueCurr24HBinMulticastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.7.3.1.11
cienaCesPmEgressQueueHist24HBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.7.4
cienaCesPmEgressQueueHist24HBinEntry
Description and OID
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.7.4.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-115
cienaCesPmEgressQueueHist24HBinStartTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The number of unicast bytes that were dropped at egress on this PM instance. current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.7.4.1.1
cienaCesPmEgressQueueHist24HBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.7.4.1.2
cienaCesPmEgressQueueHist24HBinState
1.3.6.1.4.1.1271.2.3.1.2.3.7.4.1.3
cienaCesPmEgressQueueHist24HBinUnicastDroppedBytes
Description and OID
1.3.6.1.4.1.1271.2.3.1.2.3.7.4.1.4
cienaCesPmEgressQueueHist24HBinUnicastDroppedFrames
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.7.4.1.5
cienaCesPmEgressQueueHist24HBinMulticastEnqueuedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.7.4.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-116 CIENA-CES-PM
cienaCesPmEgressQueueHist24HBinMulticastEnqueuedFrames
Description and OID
Status
Access
current
read-only
Status
Access
The number of multicast bytes that were dropped before being enqueued at
egress on this PM instance.
current
read-only
Status
Access
The number of multicast frames that were dropped before being enqueued at current
egress on this PM instance.
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.7.4.1.7
cienaCesPmEgressQueueHist24HBinMulticastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.7.4.1.8
cienaCesPmEgressQueueHist24HBinMulticastDroppedFrames
Description and OID
1.3.6.1.4.1.1271.2.3.1.2.3.7.4.1.9
cienaCesPmEgressQueueAllTimeBinTable
Description and OID
Status
Access
The (conceptual) read-only table listing the egress queue profile statistics.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
The number of unicast bytes that were dropped at egress on this PM instance. current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.7.5
cienaCesPmEgressQueueAllTimeBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.7.5.1
cienaCesPmEgressQueueAllTimeBinUnicastDroppedBytes
Description and OID
1.3.6.1.4.1.1271.2.3.1.2.3.7.5.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-117
cienaCesPmEgressQueueAllTimeBinUnicastDroppedFrames
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The (conceptual) read-only table listing the egress queue profile statistics.
current
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.7.5.1.2
cienaCesPmEgressQueueAllTimeBinMulticastEnqueuedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.7.5.1.3
cienaCesPmEgressQueueAllTimeBinMulticastEnqueuedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.7.5.1.4
cienaCesPmEgressQueueAllTimeBinMulticastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.7.5.1.5
cienaCesPmEgressQueueAllTimeBinMulticastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.7.5.1.6
cienaCesPmQueueGroupHistoryBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.8.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-118 CIENA-CES-PM
cienaCesPmQueueGroupHistoryBinEntry
Description and OID
Status
current
An entry (conceptual row) in the cienaCesPmQueueGroupHistoryBinTable.
This table lists the statistics for all the history bins of the PM instance, as
specified by the bin-count object of the PM instance. History bins are
displayed in the order that #1 bin always represents the most recently
completed bin and #2 - the bin previous to that and so on. The statistics are
displayed for only the instances with valid bins (with start time >0),
as
indicated by the operational state of the corresponding PM instance.
Access
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.8.1.1
cienaCesPmQueueGroupHistoryBinIndex
Description and OID
Status
Access
current
not-accessible
Status
Access
This object indicates a unique index for every queue in the queue group.
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.8.1.1.1
cienaCesPmQueueGroupQueueIndex
1.3.6.1.4.1.1271.2.3.1.2.3.8.1.1.2
cienaCesPmQueueGroupHistoryBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.8.1.1.3
cienaCesPmQueueGroupHistoryBinEndTime
1.3.6.1.4.1.1271.2.3.1.2.3.8.1.1.4
cienaCesPmQueueGroupHistoryBinClearTime
1.3.6.1.4.1.1271.2.3.1.2.3.8.1.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-119
cienaCesPmQueueGroupHistoryBinDuration
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.8.1.1.6
cienaCesPmQueueGroupHistoryBinState
1.3.6.1.4.1.1271.2.3.1.2.3.8.1.1.7
cienaCesPmQueueGroupHistoryBinEnqueuedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.8.1.1.8
cienaCesPmQueueGroupHistoryBinEnqueuedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.8.1.1.9
cienaCesPmQueueGroupHistoryBinDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.8.1.1.10
cienaCesPmQueueGroupHistoryBinDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.8.1.1.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-120 CIENA-CES-PM
cienaCesPmQueueGroupCurrBinTable
Description and OID
Status
Access
The (conceptual) read-only table listing the queue group profile statistics.
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.3.1.2.3.8.2
cienaCesPmQueueGroupCurrBinEntry
Description and OID
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.8.2.1
cienaCesPmQueueGroupCurrBinStartTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.8.2.1.1
cienaCesPmQueueGroupCurrBinClearedTime
1.3.6.1.4.1.1271.2.3.1.2.3.8.2.1.2
cienaCesPmQueueGroupCurrBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.8.2.1.3
cienaCesPmQueueGroupCurrBinState
1.3.6.1.4.1.1271.2.3.1.2.3.8.2.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-121
cienaCesPmQueueGroupCurrBinEnqueuedBytes
Description and OID
Status
Access
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.8.2.1.5
cienaCesPmQueueGroupCurrBinEnqueuedFrames
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The (conceptual) read-only table listing the queue group profile statistics.
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.3.1.2.3.8.2.1.6
cienaCesPmQueueGroupCurrBinDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.8.2.1.7
cienaCesPmQueueGroupCurrBinDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.8.2.1.8
cienaCesPmQueueGroupCurr24HBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.8.3
cienaCesPmQueueGroupCurr24HBinEntry
Description and OID
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.8.3.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-122 CIENA-CES-PM
cienaCesPmQueueGroupCurr24HBinStartTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.8.3.1.1
cienaCesPmQueueGroupCurr24HBinEndTime
1.3.6.1.4.1.1271.2.3.1.2.3.8.3.1.2
cienaCesPmQueueGroupCurr24HBinClearedTime
1.3.6.1.4.1.1271.2.3.1.2.3.8.3.1.3
cienaCesPmQueueGroupCurr24HBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.8.3.1.4
cienaCesPmQueueGroupCurr24HBinState
1.3.6.1.4.1.1271.2.3.1.2.3.8.3.1.5
cienaCesPmQueueGroupCurr24HBinEnqueuedBytes
Description and OID
1.3.6.1.4.1.1271.2.3.1.2.3.8.3.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-123
cienaCesPmQueueGroupCurr24HBinEnqueuedFrames
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The (conceptual) read-only table listing the queue group profile statistics.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.8.3.1.7
cienaCesPmQueueGroupCurr24HBinDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.8.3.1.8
cienaCesPmQueueGroupCurr24HBinDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.8.3.1.9
cienaCesPmQueueGroupHist24HBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.8.4
cienaCesPmQueueGroupHist24HBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.8.4.1
cienaCesPmQueueGroupHist24HBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.8.4.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-124 CIENA-CES-PM
cienaCesPmQueueGroupHist24HBinDuration
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.8.4.1.2
cienaCesPmQueueGroupHist24HBinState
1.3.6.1.4.1.1271.2.3.1.2.3.8.4.1.3
cienaCesPmQueueGroupHist24HBinEnqueuedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.8.4.1.4
cienaCesPmQueueGroupHist24HBinEnqueuedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.8.4.1.5
cienaCesPmQueueGroupHist24HBinDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.8.4.1.6
cienaCesPmQueueGroupHist24HBinDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.8.4.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-125
cienaCesPmQueueGroupAllTimeBinTable
Description and OID
Status
Access
The (conceptual) read-only table listing the queue group profile statistics.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.8.5
cienaCesPmQueueGroupAllTimeBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.8.5.1
cienaCesPmQueueGroupAllTimeBinEnqueuedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.8.5.1.1
cienaCesPmQueueGroupAllTimeBinEnqueuedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.8.5.1.2
cienaCesPmQueueGroupAllTimeBinDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.8.5.1.3
cienaCesPmQueueGroupAllTimeBinDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.8.5.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-126 CIENA-CES-PM
cienaCesPmTdmT1PortHistoryBinTable
Description and OID
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.3.1.2.3.9.1
cienaCesPmTdmT1PortHistoryBinEntry
Description and OID
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1
cienaCesPmTdmT1PortHistoryBinIndex
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.1
cienaCesPmTdmT1PortHistoryBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.2
cienaCesPmTdmT1PortHistoryBinEndTime
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.3
cienaCesPmTdmT1PortHistoryBinClearTime
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-127
cienaCesPmTdmT1PortHistoryBinDuration
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.5
cienaCesPmTdmT1PortHistoryBinState
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.6
cienaCesPmTdmT1PortHistoryBinCvl
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.7
cienaCesPmTdmT1PortHistoryBinEsl
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.8
cienaCesPmTdmT1PortHistoryBinSesl
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.9
cienaCesPmTdmT1PortHistoryBinLossl
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-128 CIENA-CES-PM
cienaCesPmTdmT1PortHistoryBinCvp
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.11
cienaCesPmTdmT1PortHistoryBinEsp
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.12
cienaCesPmTdmT1PortHistoryBinSesp
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.13
cienaCesPmTdmT1PortHistoryBinUasp
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.14
cienaCesPmTdmT1PortHistoryBinSasp
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.15
cienaCesPmTdmT1PortHistoryBinFcp
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.16
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-129
cienaCesPmTdmT1PortHistoryBinAsp
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.17
cienaCesPmTdmT1PortHistoryBinTtp
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.18
cienaCesPmTdmT1PortCurrBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.9.2
cienaCesPmTdmT1PortCurrBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1
cienaCesPmTdmT1PortCurrBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.1
cienaCesPmTdmT1PortCurrBinClearTime
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-130 CIENA-CES-PM
cienaCesPmTdmT1PortCurrBinDuration
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.3
cienaCesPmTdmT1PortCurrBinState
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.4
cienaCesPmTdmT1PortCurrBinCvl
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.5
cienaCesPmTdmT1PortCurrBinEsl
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.6
cienaCesPmTdmT1PortCurrBinSesl
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.7
cienaCesPmTdmT1PortCurrBinLossl
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-131
cienaCesPmTdmT1PortCurrBinCvp
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.9
cienaCesPmTdmT1PortCurrBinEsp
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.10
cienaCesPmTdmT1PortCurrBinSesp
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.11
cienaCesPmTdmT1PortCurrBinUasp
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.12
cienaCesPmTdmT1PortCurrBinSasp
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.13
cienaCesPmTdmT1PortCurrBinFcp
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.14
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-132 CIENA-CES-PM
cienaCesPmTdmT1PortCurrBinAsp
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.15
cienaCesPmTdmT1PortCurrBinTtp
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.16
cienaCesPmTdmT1PortCurr24HBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.9.3
cienaCesPmTdmT1PortCurr24HBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1
cienaCesPmTdmT1PortCurr24HBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.1
cienaCesPmTdmT1PortCurr24HBinClearTime
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-133
cienaCesPmTdmT1PortCurr24HBinDuration
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.3
cienaCesPmTdmT1PortCurr24HBinState
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.4
cienaCesPmTdmT1PortCurr24HBinCvl
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.5
cienaCesPmTdmT1PortCurr24HBinEsl
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.6
cienaCesPmTdmT1PortCurr24HBinSesl
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.7
cienaCesPmTdmT1PortCurr24HBinLossl
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-134 CIENA-CES-PM
cienaCesPmTdmT1PortCurr24HBinCvp
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.9
cienaCesPmTdmT1PortCurr24HBinEsp
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.10
cienaCesPmTdmT1PortCurr24HBinSesp
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.11
cienaCesPmTdmT1PortCurr24HBinUasp
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.12
cienaCesPmTdmT1PortCurr24HBinSasp
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.13
cienaCesPmTdmT1PortCurr24HBinFcp
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.14
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-135
cienaCesPmTdmT1PortCurr24HBinAsp
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.15
cienaCesPmTdmT1PortCurr24HBinTtp
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.16
cienaCesPmTdmT1PortHist24HBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.9.4
cienaCesPmTdmT1PortHist24HBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1
cienaCesPmTdmT1PortHist24HBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.1
cienaCesPmTdmT1PortHist24HBinEndTime
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-136 CIENA-CES-PM
cienaCesPmTdmT1PortHist24HBinClearTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.3
cienaCesPmTdmT1PortHist24HBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.4
cienaCesPmTdmT1PortHist24HBinState
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.5
cienaCesPmTdmT1PortHist24HBinCvl
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.6
cienaCesPmTdmT1PortHist24HBinEsl
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.7
cienaCesPmTdmT1PortHist24HBinSesl
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-137
cienaCesPmTdmT1PortHist24HBinLossl
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.9
cienaCesPmTdmT1PortHist24HBinCvp
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.10
cienaCesPmTdmT1PortHist24HBinEsp
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.11
cienaCesPmTdmT1PortHist24HBinSesp
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.12
cienaCesPmTdmT1PortHist24HBinUasp
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.13
cienaCesPmTdmT1PortHist24HBinSasp
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.14
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-138 CIENA-CES-PM
cienaCesPmTdmT1PortHist24HBinFcp
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.15
cienaCesPmTdmT1PortHist24HBinAsp
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.16
cienaCesPmTdmT1PortHist24HBinTtp
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.17
cienaCesPmTdmT1PortStatisticsBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.9.5
cienaCesPmTdmT1PortStatisticsBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1
cienaCesPmTdmT1PortStatisticsBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-139
cienaCesPmTdmT1PortStatisticsBinClearTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.2
cienaCesPmTdmT1PortStatisticsBinCvl
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.3
cienaCesPmTdmT1PortStatisticsBinEsl
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.4
cienaCesPmTdmT1PortStatisticsBinSesl
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.5
cienaCesPmTdmT1PortStatisticsBinLossl
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.6
cienaCesPmTdmT1PortStatisticsBinCvp
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-140 CIENA-CES-PM
cienaCesPmTdmT1PortStatisticsBinEsp
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.8
cienaCesPmTdmT1PortStatisticsBinSesp
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.9
cienaCesPmTdmT1PortStatisticsBinUasp
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.10
cienaCesPmTdmT1PortStatisticsBinSasp
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.11
cienaCesPmTdmT1PortStatisticsBinFcp
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.12
cienaCesPmTdmT1PortStatisticsBinAsp
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.13
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-141
cienaCesPmTdmT1PortStatisticsBinTtp
Description and OID
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.14
cienaCesPmTdmT1PortTotalStatisticsBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.9.6
cienaCesPmTdmT1PortTotalStatisticsBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1
cienaCesPmTdmT1PortTotalStatisticsBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1.1
cienaCesPmTdmT1PortTotalStatisticsBinCvl
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1.2
cienaCesPmTdmT1PortTotalStatisticsBinEsl
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-142 CIENA-CES-PM
cienaCesPmTdmT1PortTotalStatisticsBinSesl
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1.4
cienaCesPmTdmT1PortTotalStatisticsBinLossl
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1.5
cienaCesPmTdmT1PortTotalStatisticsBinCvp
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1.6
cienaCesPmTdmT1PortTotalStatisticsBinEsp
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1.7
cienaCesPmTdmT1PortTotalStatisticsBinSesp
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1.8
cienaCesPmTdmT1PortTotalStatisticsBinUasp
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-143
cienaCesPmTdmT1PortTotalStatisticsBinSasp
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1.10
cienaCesPmTdmT1PortTotalStatisticsBinFcp
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1.11
cienaCesPmTdmT1PortTotalStatisticsBinAsp
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1.12
cienaCesPmTdmT1PortTotalStatisticsBinTtp
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1.13
cienaCesPmTdmE1PortHistoryBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.10.1
cienaCesPmTdmE1PortHistoryBinEntry
Description and OID
current
An entry (conceptual row) in the cienaPortPmTdmE1PortHistoryBinTable.
This table lists the statistics for all the history bins of the PM instance, as
specified by the bin-count object of the PM instance. History bins are
displayed in the order so that #1 bin always represents the most recently
completed bin and #2 - the bin previous to that and so on. The statistics are
displayed for only the instances with valid bins (with start time >0), as indicated
by the operational state of the corresponding PM instance.
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.10.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-144 CIENA-CES-PM
cienaCesPmTdmE1PortHistoryBinIndex
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.10.1.1.1
cienaCesPmTdmE1PortHistoryBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.10.1.1.2
cienaCesPmTdmE1PortHistoryBinEndTime
1.3.6.1.4.1.1271.2.3.1.2.3.10.1.1.3
cienaCesPmTdmE1PortHistoryBinClearTime
1.3.6.1.4.1.1271.2.3.1.2.3.10.1.1.4
cienaCesPmTdmE1PortHistoryBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.10.1.1.5
cienaCesPmTdmE1PortHistoryBinState
1.3.6.1.4.1.1271.2.3.1.2.3.10.1.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-145
cienaCesPmTdmE1PortHistoryBinEb
Description and OID
Status
Access
Errored blocks.
current
read-only
Status
Access
current
read-only
Status
Access
Errored seconds.
current
read-only
Status
Access
current
read-only
Status
Access
Unavailable seconds.
current
read-only
Status
Access
Available seconds.
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.10.1.1.7
cienaCesPmTdmE1PortHistoryBinBbe
1.3.6.1.4.1.1271.2.3.1.2.3.10.1.1.8
cienaCesPmTdmE1PortHistoryBinEs
1.3.6.1.4.1.1271.2.3.1.2.3.10.1.1.9
cienaCesPmTdmE1PortHistoryBinSes
1.3.6.1.4.1.1271.2.3.1.2.3.10.1.1.10
cienaCesPmTdmE1PortHistoryBinUas
1.3.6.1.4.1.1271.2.3.1.2.3.10.1.1.11
cienaCesPmTdmE1PortHistoryBinAs
1.3.6.1.4.1.1271.2.3.1.2.3.10.1.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-146 CIENA-CES-PM
cienaCesPmTdmE1PortHistoryBinTt
Description and OID
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.10.1.1.13
cienaCesPmTdmE1PortCurrBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.10.2
cienaCesPmTdmE1PortCurrBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.10.2.1
cienaCesPmTdmE1PortCurrBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.10.2.1.1
cienaCesPmTdmE1PortCurrBinClearTime
1.3.6.1.4.1.1271.2.3.1.2.3.10.2.1.2
cienaCesPmTdmE1PortCurrBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.10.2.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-147
cienaCesPmTdmE1PortCurrBinState
Description and OID
Status
Access
current
read-only
Status
Access
Errored blocks.
current
read-only
Status
Access
current
read-only
Status
Access
Errored seconds.
current
read-only
Status
Access
current
read-only
Status
Access
Unavailable seconds.
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.10.2.1.4
cienaCesPmTdmE1PortCurrBinEb
1.3.6.1.4.1.1271.2.3.1.2.3.10.2.1.5
cienaCesPmTdmE1PortCurrBinBbe
1.3.6.1.4.1.1271.2.3.1.2.3.10.2.1.6
cienaCesPmTdmE1PortCurrBinEs
1.3.6.1.4.1.1271.2.3.1.2.3.10.2.1.7
cienaCesPmTdmE1PortCurrBinSes
1.3.6.1.4.1.1271.2.3.1.2.3.10.2.1.8
cienaCesPmTdmE1PortCurrBinUas
1.3.6.1.4.1.1271.2.3.1.2.3.10.2.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-148 CIENA-CES-PM
cienaCesPmTdmE1PortCurrBinAs
Description and OID
Status
Access
Available seconds.
current
read-only
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.10.2.1.10
cienaCesPmTdmE1PortCurrBinTt
1.3.6.1.4.1.1271.2.3.1.2.3.10.2.1.11
cienaCesPmTdmE1PortCurr24HBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.10.3
cienaCesPmTdmE1PortCurr24HBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.10.3.1
cienaCesPmTdmE1PortCurr24HBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.10.3.1.1
cienaCesPmTdmE1PortCurr24HBinClearTime
1.3.6.1.4.1.1271.2.3.1.2.3.10.3.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-149
cienaCesPmTdmE1PortCurr24HBinDuration
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Errored blocks.
current
read-only
Status
Access
current
read-only
Status
Access
Errored seconds.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.10.3.1.3
cienaCesPmTdmE1PortCurr24HBinState
1.3.6.1.4.1.1271.2.3.1.2.3.10.3.1.4
cienaCesPmTdmE1PortCurr24HBinEb
1.3.6.1.4.1.1271.2.3.1.2.3.10.3.1.5
cienaCesPmTdmE1PortCurr24HBinBbe
1.3.6.1.4.1.1271.2.3.1.2.3.10.3.1.6
cienaCesPmTdmE1PortCurr24HBinEs
1.3.6.1.4.1.1271.2.3.1.2.3.10.3.1.7
cienaCesPmTdmE1PortCurr24HBinSes
1.3.6.1.4.1.1271.2.3.1.2.3.10.3.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-150 CIENA-CES-PM
cienaCesPmTdmE1PortCurr24HBinUas
Description and OID
Status
Access
Unavailable seconds.
current
read-only
Status
Access
Available seconds.
current
read-only
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.10.3.1.9
cienaCesPmTdmE1PortCurr24HBinAs
1.3.6.1.4.1.1271.2.3.1.2.3.10.3.1.10
cienaCesPmTdmE1PortCurr24HBinTt
1.3.6.1.4.1.1271.2.3.1.2.3.10.3.1.11
cienaCesPmTdmE1PortHist24HBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.10.4
cienaCesPmTdmE1PortHist24HBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.10.4.1
cienaCesPmTdmE1PortHist24HBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.10.4.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-151
cienaCesPmTdmE1PortHist24HBinEndTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Errored blocks.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.10.4.1.2
cienaCesPmTdmE1PortHist24HBinClearTime
1.3.6.1.4.1.1271.2.3.1.2.3.10.4.1.3
cienaCesPmTdmE1PortHist24HBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.10.4.1.4
cienaCesPmTdmE1PortHist24HBinState
1.3.6.1.4.1.1271.2.3.1.2.3.10.4.1.5
cienaCesPmTdmE1PortHist24HBinEb
1.3.6.1.4.1.1271.2.3.1.2.3.10.4.1.6
cienaCesPmTdmE1PortHist24HBinBbe
1.3.6.1.4.1.1271.2.3.1.2.3.10.4.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-152 CIENA-CES-PM
cienaCesPmTdmE1PortHist24HBinEs
Description and OID
Status
Access
Errored seconds.
current
read-only
Status
Access
current
read-only
Status
Access
Unavailable seconds.
current
read-only
Status
Access
Available seconds.
current
read-only
Status
Access
current
read-only
Status
Access
current
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.10.4.1.8
cienaCesPmTdmE1PortHist24HBinSes
1.3.6.1.4.1.1271.2.3.1.2.3.10.4.1.9
cienaCesPmTdmE1PortHist24HBinUas
1.3.6.1.4.1.1271.2.3.1.2.3.10.4.1.10
cienaCesPmTdmE1PortHist24HBinAs
1.3.6.1.4.1.1271.2.3.1.2.3.10.4.1.11
cienaCesPmTdmE1PortHist24HBinTt
1.3.6.1.4.1.1271.2.3.1.2.3.10.4.1.12
cienaCesPmTdmE1PortStatisticsBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.10.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-153
cienaCesPmTdmE1PortStatisticsBinEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Errored blocks.
current
read-only
Status
Access
current
read-only
Status
Access
Errored seconds.
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.10.5.1
cienaCesPmTdmE1PortStatisticsBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.10.5.1.1
cienaCesPmTdmE1PortStatisticsBinClearTime
1.3.6.1.4.1.1271.2.3.1.2.3.10.5.1.2
cienaCesPmTdmE1PortStatisticsBinEb
1.3.6.1.4.1.1271.2.3.1.2.3.10.5.1.3
cienaCesPmTdmE1PortStatisticsBinBbe
1.3.6.1.4.1.1271.2.3.1.2.3.10.5.1.4
cienaCesPmTdmE1PortStatisticsBinEs
1.3.6.1.4.1.1271.2.3.1.2.3.10.5.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-154 CIENA-CES-PM
cienaCesPmTdmE1PortStatisticsBinSes
Description and OID
Status
Access
current
read-only
Status
Access
Unavailable seconds.
current
read-only
Status
Access
Available seconds.
current
read-only
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.10.5.1.6
cienaCesPmTdmE1PortStatisticsBinUas
1.3.6.1.4.1.1271.2.3.1.2.3.10.5.1.7
cienaCesPmTdmE1PortStatisticsBinAs
1.3.6.1.4.1.1271.2.3.1.2.3.10.5.1.8
cienaCesPmTdmE1PortStatisticsBinTt
1.3.6.1.4.1.1271.2.3.1.2.3.10.5.1.9
cienaCesPmTdmE1PortTotalStatisticsBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.10.6
cienaCesPmTdmE1PortTotalStatisticsBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.10.6.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-155
cienaCesPmTdmE1PortTotalStatisticsBinStartTime
Description and OID
Status
Access
current
read-only
Status
Access
Errored blocks.
current
read-only
Status
Access
current
read-only
Status
Access
Errored seconds.
current
read-only
Status
Access
current
read-only
Status
Access
Unavailable seconds.
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.10.6.1.1
cienaCesPmTdmE1PortTotalStatisticsBinEb
1.3.6.1.4.1.1271.2.3.1.2.3.10.6.1.2
cienaCesPmTdmE1PortTotalStatisticsBinBbe
1.3.6.1.4.1.1271.2.3.1.2.3.10.6.1.3
cienaCesPmTdmE1PortTotalStatisticsBinEs
1.3.6.1.4.1.1271.2.3.1.2.3.10.6.1.4
cienaCesPmTdmE1PortTotalStatisticsBinSes
1.3.6.1.4.1.1271.2.3.1.2.3.10.6.1.5
cienaCesPmTdmE1PortTotalStatisticsBinUas
1.3.6.1.4.1.1271.2.3.1.2.3.10.6.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-156 CIENA-CES-PM
cienaCesPmTdmE1PortTotalStatisticsBinAs
Description and OID
Status
Access
Available seconds.
current
read-only
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.3.1.2.3.10.6.1.7
cienaCesPmTdmE1PortTotalStatisticsBinTt
1.3.6.1.4.1.1271.2.3.1.2.3.10.6.1.8
cienaCesPmTdmPwHistoryBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.11.1
cienaCesPmTdmPwHistoryBinEntry
Description and OID
current
An entry (conceptual row) in the cienaPortPmTdmPwHistoryBinTable. This
table lists the statistics for all the history bins of the PM instance, as specified
by the bin-count object of the PM instance. History bins are displayed in the
order so that #1 bin always represents the most recently completed bin and #2
- the bin previous to that and so on. The statistics are displayed for only the
instances with valid bins (with start time >0), as indicated by the operational
state of the corresponding PM instance.
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1
cienaCesPmTdmPwHistoryBinIndex
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.1
cienaCesPmTdmPwHistoryBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-157
cienaCesPmTdmPwHistoryBinEndTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.3
cienaCesPmTdmPwHistoryBinClearTime
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.4
cienaCesPmTdmPwHistoryBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.5
cienaCesPmTdmPwHistoryBinState
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.6
cienaCesPmTdmPwHistoryBinMiss
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.7
cienaCesPmTdmPwHistoryBinReorder
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-158 CIENA-CES-PM
cienaCesPmTdmPwHistoryBinMissorder
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Errored seconds.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.9
cienaCesPmTdmPwHistoryBinMalformed
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.10
cienaCesPmTdmPwHistoryBinUnderrun
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.11
cienaCesPmTdmPwHistoryBinOverrun
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.12
cienaCesPmTdmPwHistoryBinEs
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.13
cienaCesPmTdmPwHistoryBinSes
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.14
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-159
cienaCesPmTdmPwHistoryBinUas
Description and OID
Status
Access
Unavailable seconds.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.15
cienaCesPmTdmPwHistoryBinLops
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.16
cienaCesPmTdmPwHistoryBinLbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.17
cienaCesPmTdmPwHistoryBinRbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.18
cienaCesPmTdmPwHistoryBinMbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.19
cienaCesPmTdmPwHistoryBinRxPkt
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.20
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-160 CIENA-CES-PM
cienaCesPmTdmPwHistoryBinTxPkt
Description and OID
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.21
cienaCesPmTdmPwCurrBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.11.2
cienaCesPmTdmPwCurrBinEntry
Description and OID
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1
cienaCesPmTdmPwCurrBinStartTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.1
cienaCesPmTdmPwCurrBinClearTime
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.2
cienaCesPmTdmPwCurrBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-161
cienaCesPmTdmPwCurrBinState
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.4
cienaCesPmTdmPwCurrBinMiss
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.5
cienaCesPmTdmPwCurrBinReorder
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.6
cienaCesPmTdmPwCurrBinMissorder
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.7
cienaCesPmTdmPwCurrBinMalformed
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.8
cienaCesPmTdmPwCurrBinUnderrun
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-162 CIENA-CES-PM
cienaCesPmTdmPwCurrBinOverrun
Description and OID
Status
Access
current
read-only
Status
Access
Errored seconds.
current
read-only
Status
Access
current
read-only
Status
Access
Unavailable seconds.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.10
cienaCesPmTdmPwCurrBinEs
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.11
cienaCesPmTdmPwCurrBinSes
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.12
cienaCesPmTdmPwCurrBinUas
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.13
cienaCesPmTdmPwCurrBinLops
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.14
cienaCesPmTdmPwCurrBinLbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.15
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-163
cienaCesPmTdmPwCurrBinRbit
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.16
cienaCesPmTdmPwCurrBinMbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.17
cienaCesPmTdmPwCurrBinRxPkt
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.18
cienaCesPmTdmPwCurrBinTxPkt
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.19
cienaCesPmTdmPwCurr24HBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.11.3
cienaCesPmTdmPwCurr24HBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-164 CIENA-CES-PM
cienaCesPmTdmPwCurr24HBinStartTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.1
cienaCesPmTdmPwCurr24HBinClearTime
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.2
cienaCesPmTdmPwCurr24HBinDuration
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.3
cienaCesPmTdmPwCurr24HBinState
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.4
cienaCesPmTdmPwCurr24HBinMiss
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.5
cienaCesPmTdmPwCurr24HBinReorder
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-165
cienaCesPmTdmPwCurr24HBinMissorder
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Errored seconds.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.7
cienaCesPmTdmPwCurr24HBinMalformed
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.8
cienaCesPmTdmPwCurr24HBinUnderrun
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.9
cienaCesPmTdmPwCurr24HBinOverrun
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.10
cienaCesPmTdmPwCurr24HBinEs
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.11
cienaCesPmTdmPwCurr24HBinSes
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-166 CIENA-CES-PM
cienaCesPmTdmPwCurr24HBinUas
Description and OID
Status
Access
Unavailable seconds.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.13
cienaCesPmTdmPwCurr24HBinLops
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.14
cienaCesPmTdmPwCurr24HBinLbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.15
cienaCesPmTdmPwCurr24HBinRbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.16
cienaCesPmTdmPwCurr24HBinMbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.17
cienaCesPmTdmPwCurr24HBinRxPkt
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.18
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-167
cienaCesPmTdmPwCurr24HBinTxPkt
Description and OID
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.19
cienaCesPmTdmPwHist24HBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.11.4
cienaCesPmTdmPwHist24HBinEntry
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1
cienaCesPmTdmPwHist24HBinStartTime
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.1
cienaCesPmTdmPwHist24HBinEndTime
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.2
cienaCesPmTdmPwHist24HBinClearTime
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-168 CIENA-CES-PM
cienaCesPmTdmPwHist24HBinDuration
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.4
cienaCesPmTdmPwHist24HBinState
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.5
cienaCesPmTdmPwHist24HBinMiss
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.6
cienaCesPmTdmPwHist24HBinReorder
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.7
cienaCesPmTdmPwHist24HBinMissorder
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.8
cienaCesPmTdmPwHist24HBinMalformed
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-169
cienaCesPmTdmPwHist24HBinUnderrun
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Errored seconds.
current
read-only
Status
Access
current
read-only
Status
Access
Unavailable seconds.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.10
cienaCesPmTdmPwHist24HBinOverrun
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.11
cienaCesPmTdmPwHist24HBinEs
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.12
cienaCesPmTdmPwHist24HBinSes
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.13
cienaCesPmTdmPwHist24HBinUas
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.14
cienaCesPmTdmPwHist24HBinLops
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.15
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-170 CIENA-CES-PM
cienaCesPmTdmPwHist24HBinLbit
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.16
cienaCesPmTdmPwHist24HBinRbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.17
cienaCesPmTdmPwHist24HBinMbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.18
cienaCesPmTdmPwHist24HBinRxPkt
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.19
cienaCesPmTdmPwHist24HBinTxPkt
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.20
cienaCesPmTdmPwStatisticsBinTable
1.3.6.1.4.1.1271.2.3.1.2.3.11.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-171
cienaCesPmTdmPwStatisticsBinEntry
Description and OID
Status
Access
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1
cienaCesPmTdmPwStatisticsBinStartTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.1
cienaCesPmTdmPwStatisticsBinClearTime
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.2
cienaCesPmTdmPwStatisticsBinMiss
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.3
cienaCesPmTdmPwStatisticsBinReorder
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.4
cienaCesPmTdmPwStatisticsBinMissorder
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-172 CIENA-CES-PM
cienaCesPmTdmPwStatisticsBinMalformed
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Errored seconds.
current
read-only
Status
Access
current
read-only
Status
Access
Unavailable seconds.
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.6
cienaCesPmTdmPwStatisticsBinUnderrun
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.7
cienaCesPmTdmPwStatisticsBinOverrun
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.8
cienaCesPmTdmPwStatisticsBinEs
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.9
cienaCesPmTdmPwStatisticsBinSes
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.10
cienaCesPmTdmPwStatisticsBinUas
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-173
cienaCesPmTdmPwStatisticsBinLops
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.12
cienaCesPmTdmPwStatisticsBinLbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.13
cienaCesPmTdmPwStatisticsBinRbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.14
cienaCesPmTdmPwStatisticsBinMbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.15
cienaCesPmTdmPwStatisticsBinRxPkt
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.16
cienaCesPmTdmPwStatisticsBinTxPkt
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.17
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-174 CIENA-CES-PM
cienaCesPmTdmPwTotalStatisticsBinTable
Description and OID
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.3.1.2.3.11.6
cienaCesPmTdmPwTotalStatisticsBinEntry
Description and OID
not-accessible
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1
cienaCesPmTdmPwTotalStatisticsBinStartTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.1
cienaCesPmTdmPwTotalStatisticsBinMiss
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.2
cienaCesPmTdmPwTotalStatisticsBinReorder
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.3
cienaCesPmTdmPwTotalStatisticsBinMissorder
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-PM 11-175
cienaCesPmTdmPwTotalStatisticsBinMalformed
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Errored seconds.
current
read-only
Status
Access
current
read-only
Status
Access
Unavailable seconds.
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.5
cienaCesPmTdmPwTotalStatisticsBinUnderrun
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.6
cienaCesPmTdmPwTotalStatisticsBinOverrun
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.7
cienaCesPmTdmPwTotalStatisticsBinEs
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.8
cienaCesPmTdmPwTotalStatisticsBinSes
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.9
cienaCesPmTdmPwTotalStatisticsBinUas
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
11-176 CIENA-CES-PM
cienaCesPmTdmPwTotalStatisticsBinLops
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.11
cienaCesPmTdmPwTotalStatisticsBinLbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.12
cienaCesPmTdmPwTotalStatisticsBinRbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.13
cienaCesPmTdmPwTotalStatisticsBinMbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.14
cienaCesPmTdmPwTotalStatisticsBinRxPkt
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.15
cienaCesPmTdmPwTotalStatisticsBinTxPkt
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.16
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
12-1
CIENA-CES-RSVPTE-MIB
1-
This chapter provides the object definitions and notifications for the CIENACES-RSVPTE-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
cienaCesRsvpteAdminStatus
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The persistent tunnel retry interval. This is the interval between the first failure current
of a persistent tunnel and the first attempt to re-establish the tunnel. This
cannot be changed while the administrative status is enabled or the
operational status is up.
read-only
1.3.6.1.4.1.1271.2.1.16.1.1.1
cienaCesRsvpteOperStatus
1.3.6.1.4.1.1271.2.1.16.1.1.2
cienaCesRsvpteRetryInterval
Description and OID
1.3.6.1.4.1.1271.2.1.16.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
12-2 CIENA-CES-RSVPTE-MIB
cienaCesRsvpteRetryInfiniteState
Description and OID
Status
Access
current
The persistent tunnel retry infinity. This is the state which when on, triggers
RSVP-TE to try to restore the tunnels infinite times. This object can only be set
if RSVP-TE is globally disabled.
read-only
1.3.6.1.4.1.1271.2.1.16.1.1.4
cienaCesRsvpteRetryMax
Description and OID
Status
Access
The maximum number of retry attempts that will be made before a persistent current
tunnel is deemed inoperable. Once in this state, a management agent should
set mplsTunnelAdminStatus to 'up' to attempt to re-establish the tunnel. This
field is not used when cienaCesRsvpteRetryInfiniteState is on.
read-only
1.3.6.1.4.1.1271.2.1.16.1.1.5
cienaCesRsvpteRefreshInterval
Description and OID
Status
Access
The RSVP-TE value, R, which is used to set the average interval between
refresh path and RESV messages.
current
read-only
Status
Access
The RSVP-TE value, K, which is the number of unresponded path or RESV current
refresh attempts that must be made, spaced by the refresh interval, before the
state is deemed to have timed out.
read-only
1.3.6.1.4.1.1271.2.1.16.1.1.6
cienaCesRsvpteRefreshMultiple
Description and OID
1.3.6.1.4.1.1271.2.1.16.1.1.7
cienaCesRsvpteRfrshSlewDenom
Description and OID
Status
Access
This object is deprecated and the new object to provide this information is
cienaCesRsvpteRefreshSlewDenominator in this table.
deprecated
read-only
1.3.6.1.4.1.1271.2.1.16.1.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-RSVPTE-MIB 12-3
cienaCesRsvpteRfrshSlewNumerator
Description and OID
Status
Access
This object is deprecated and the new object to provide this information is
cienaCesRsvpteRefreshSlewNumerator in this table.
deprecated
read-only
Status
Access
The RSVP-TE value, Kb, which is the number of refresh timeout periods after current
which the blockade state is deleted.
read-only
1.3.6.1.4.1.1271.2.1.16.1.1.9
cienaCesRsvpteBlockadeMultiple
Description and OID
1.3.6.1.4.1.1271.2.1.16.1.1.10
cienaCesRsvpteLSPSetupPriority
Description and OID
Status
Access
current
The setup priority to apply to LSPs that are not signaling this parameter. 0
represents the highest priority and 7 the lowest. The value of this object must
be numerically greater than or equal to (lower or equal priority) than the value
of the holding priority object.
read-only
1.3.6.1.4.1.1271.2.1.16.1.1.11
cienaCesRsvpteLSPHoldingPriority
Description and OID
Status
Access
The holding priority to apply to LSPs that are not signaling this parameter. 0 current
represents the highest priority and 7 the lowest. The value of this object must
be numerically less than or equal to (higher or equal priority) than the value of
the holding priority object.
read-only
1.3.6.1.4.1.1271.2.1.16.1.1.12
cienaCesRsvpteUseHopByHop
Description and OID
Status
Access
A flag to indicate that RSVP-TE should use the hop by hop addressing scheme current
for the PATH and PATH-TEAR messages it sends. If set, then the IP
addresses used in the IP header of the PATH messages forwarded by RSVPTE set the source as the local outgoing interface IP address, and set the
destination as the next hop router IP address.
read-only
1.3.6.1.4.1.1271.2.1.16.1.1.13
MIB Reference
009-3220-011 Standard Revision A
August 2013
12-4 CIENA-CES-RSVPTE-MIB
cienaCesRsvpteRestartCapable
Description and OID
Status
Access
A flag to indicate whether the local node should advertise itself as restart
capable.
current
read-only
Status
Access
The time in milliseconds that the local node takes to restart RSVP-TE and the current
communication channel used for RSVP-TE communication. This is advertised
to neighbors in the Restart_Cap object in Hello messages. Only used if
cienaCesRsvpteRestartCapable is set to true.
read-only
1.3.6.1.4.1.1271.2.1.16.1.1.14
cienaCesRsvpteRestartTime
Description and OID
1.3.6.1.4.1.1271.2.1.16.1.1.15
cienaCesRsvpteRecoveryTime
Description and OID
Status
Access
The period of time in milliseconds that the local node would like neighbors to current
take to resyncronize RSVP-TE and MPLS forwarding information after the reestablishment of Hello connectivity. This is advertised to neighbors in the
Restart_Cap object in Hello messages. A value of zero indicates that the node
does not support resynchronization following failure of the local node. A value
of 0xFFFFFFFF indicates an infinite recovery time. Only used if
cienaCesRsvpteRestartCapable is set to true.
read-only
1.3.6.1.4.1.1271.2.1.16.1.1.16
cienaCesRsvpteMinPeerRestart
Description and OID
Status
Access
The mininum period of time in milliseconds that RSVP-TE should wait for a
restart capable neighbor to regain Hello connectivity before invoking
procedures related to communication loss. RSVP-TE waits for the maximum
of this time and the restart_time advertised in the RESTART_CAP object in
Hello messages from the neighbor.
current
read-only
1.3.6.1.4.1.1271.2.1.16.1.1.17
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-RSVPTE-MIB 12-5
cienaCesRsvpteRefreshSlewDenominator
Description and OID
Status
Access
The denominator of the fraction, SlewMax, which is the maximum allowable current
increase in the refresh interval, R, to prevent state timeout while changing R.
R is increased by this fraction until it reaches the new desired value.
read-only
1.3.6.1.4.1.1271.2.1.16.1.1.18
cienaCesRsvpteRefreshSlewNumerator
Description and OID
Status
Access
current
The numerator of the fraction, SlewMax, which is the maximum allowable
increase in the refresh interval, R, to prevent state timeout while changing R.
R is increased by this fraction until it reaches the new desired value.
read-only
1.3.6.1.4.1.1271.2.1.16.1.1.19
cienaCesRsvpteIfTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
Interface index.
current
not-accessible
Status
Access
Interface name.
current
read-only
1.3.6.1.4.1.1271.2.1.16.1.2.1
cienaCesRsvpteIfEntry
1.3.6.1.4.1.1271.2.1.16.1.2.1.1
cienaCesRsvpteIfIndex
1.3.6.1.4.1.1271.2.1.16.1.2.1.1.1
cienaCesRsvpteIfName
1.3.6.1.4.1.1271.2.1.16.1.2.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
12-6 CIENA-CES-RSVPTE-MIB
cienaCesRsvpteIfIpAddr
Description and OID
Status
Access
Interface IP address.
current
read-only
Status
Access
deprecated
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
RSVP-TE Hello tolerance defines the number of Hello intervals that can pass current
without receiving a successful Hello message from a partner before the Hello
session times out.
read-only
1.3.6.1.4.1.1271.2.1.16.1.2.1.1.3
cienaCesRsvpteIfMtu
1.3.6.1.4.1.1271.2.1.16.1.2.1.1.4
cienaCesRsvpteIfAdminStatus
1.3.6.1.4.1.1271.2.1.16.1.2.1.1.5
cienaCesRsvpteIfOperStatus
1.3.6.1.4.1.1271.2.1.16.1.2.1.1.6
cienaCesRsvpteIfHelloInterval
1.3.6.1.4.1.1271.2.1.16.1.2.1.1.7
cienaCesRsvpteIfHelloTolerance
Description and OID
1.3.6.1.4.1.1271.2.1.16.1.2.1.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-RSVPTE-MIB 12-7
cienaCesRsvpteIfAdvertisedLabel
Description and OID
Status
Access
This object indicates what kind of label will be advertised by RSVP-TE for a
Label Request received on this L3 interface.
current
read-only
1.3.6.1.4.1.1271.2.1.16.1.2.1.1.9
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
13-1
CIENA-CES-TIME-SYNC-MIB
1-
This chapter provides the object definitions and notifications for the CIENACES-TIME-SYNC-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
cienaCesSyncAdminState
Description and OID
Status
Access
current
read-only
Status
Access
Indication of which set of SSM values being used. Option 1 is for International current
standard and Option 2 is for North American.
read-only
1.3.6.1.4.1.1271.2.1.28.1.1.1
cienaCesSyncOptionType
Description and OID
1.3.6.1.4.1.1271.2.1.28.1.1.2
cienaCesSyncRevertiveMode
Description and OID
Status
Access
Revertive mode.
current
read-only
Status
Access
User configured timer for a timing reference source to wait before transitioning current
from bad to good clock signal.
read-only
1.3.6.1.4.1.1271.2.1.28.1.1.3
cienaCesSyncWaitToRestoreTimer
Description and OID
1.3.6.1.4.1.1271.2.1.28.1.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
13-2 CIENA-CES-TIME-SYNC-MIB
cienaCesSyncInputProtectionGroupTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
deprecated
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.28.1.1.5
cienaCesSyncInputProtectionGroupEntry
1.3.6.1.4.1.1271.2.1.28.1.1.5.1
cienaCesInputPGEntityId
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.1
cienaCesInputPGEntityName
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.2
cienaCesInputPGPreferredReference
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.3
cienaCesInputPGSelectedReference
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-TIME-SYNC-MIB 13-3
cienaCesInputPGForcedReference
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
deprecated
read-only
Status
Access
current
read-only
Status
Access
The number of timing reference switching since the system stared up.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.5
cienaCesInputPGThresholdQualityLevel
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.6
cienaCesInputPGState
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.7
cienaCesInputPGStateDuration
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.8
cienaCesInputPGReferenceSwitchCount
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.9
cienaCesInputPGOperationalStatus
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
13-4 CIENA-CES-TIME-SYNC-MIB
cienaCesInputPGTimingType
Description and OID
Status
Access
The timing domain (freq/phase/tod) that this protection group belongs to.
current
read-only
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.11
cienaCesSyncInputProtectionUnitTable
1.3.6.1.4.1.1271.2.1.28.1.1.6
cienaCesSyncInputProtectionUnitEntry
Description and OID
An entry in this table represents information on a protection unit for input timing current
reference.
not-accessible
1.3.6.1.4.1.1271.2.1.28.1.1.6.1
cienaCesInputPUEntityId
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
The identifier of the input protection group(s) which this input protection unit
belongs to.
current
read-only
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.1
cienaCesInputPUEntityName
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.2
cienaCesInputPUPGEntityName
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-TIME-SYNC-MIB 13-5
cienaCesInputPUTimingInterfaceName
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
User configured clock quality level that this input protection unit is forced to
operate at.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.4
cienaCesInputPUTimingInterfaceProtocol
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.5
cienaCesInputPUUserPriority
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.6
cienaCesInputPUOperationalQL
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.7
cienaCesInputPUForcedQL
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.8
cienaCesInputPUReceivedQL
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
13-6 CIENA-CES-TIME-SYNC-MIB
cienaCesInputPUSsmEnabled
Description and OID
Status
Access
Enable/disable reading of actual received clock quality level for this input
protection unit.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.10
cienaCesInputPUOperationalStatus
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.11
cienaCesInputPUBITSSignalMode
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.12
cienaCesInputPUBITSSignalFormat
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.13
cienaCesInputPUBITSSignalEncoding
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.14
cienaCesInputPUUserOverridePriority
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.15
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-TIME-SYNC-MIB 13-7
cienaCesInputPUPTPEncapType
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
GPS frequency clock, set if a GPS input is used as a protection unit and the
cienaCesInputPUGPSClockMode is set to frequency.
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.16
cienaCesInputPUGPSClockMode
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.17
cienaCesInputPUGPSFreqClock
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.18
cienaCesSyncOutputTable
1.3.6.1.4.1.1271.2.1.28.1.1.7
cienaCesSyncOutputEntry
1.3.6.1.4.1.1271.2.1.28.1.1.7.1
cienaCesOutputEntityId
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
13-8 CIENA-CES-TIME-SYNC-MIB
cienaCesOutputEntityName
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.2
cienaCesOutputTimingInterfaceName
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.3
cienaCesOutputTimingInterfaceProtocol
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.4
cienaCesOutputOperationalQL
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.5
cienaCesOutputOperationalStatus
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.6
cienaCesOutputBITSSignalMode
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-TIME-SYNC-MIB 13-9
cienaCesOutputBITSSignalFormat
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
BITS Signal Line Buildout, set if BITS signal is used as an output reference.
current
read-only
Status
Access
BITS Signal Ssm Location, set if BITS signal is used as an output reference.
current
read-only
Status
Access
current
read-only
Status
Access
GPS frequency clock, set if a GPS signal is used as an output reference and current
the cienaCesOutputGPSClockMode is set to frequency.
read-only
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.8
cienaCesOutputBITSSignalEncoding
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.9
cienaCesOutputBITSSignalLineBuildout
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.10
cienaCesOutputBITSSignalSsmLocation
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.11
cienaCesOutputGPSClockMode
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.12
cienaCesOutputGPSFreqClock
Description and OID
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.13
MIB Reference
009-3220-011 Standard Revision A
August 2013
13-10 CIENA-CES-TIME-SYNC-MIB
cienaCesSyncPTPAddrMode
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.28.1.1.8.1.1
cienaCesSyncPTPTagPriority
1.3.6.1.4.1.1271.2.1.28.1.1.8.1.2
cienaCesSyncPTPProtocolVersion
1.3.6.1.4.1.1271.2.1.28.1.1.8.1.3
cienaCesSyncPTPProfileVersion
1.3.6.1.4.1.1271.2.1.28.1.1.8.1.4
cienaCesSyncPTPProfileIdentifier
1.3.6.1.4.1.1271.2.1.28.1.1.8.1.5
cienaCesSyncPTPDomainNumber
1.3.6.1.4.1.1271.2.1.28.1.1.8.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-TIME-SYNC-MIB 13-11
cienaCesSyncPTPInputUnicastReqDuration
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The 1pps pulse width, in microseconds, for GPS output references (applicable current
to phase).
read-only
1.3.6.1.4.1.1271.2.1.28.1.1.8.2.1
cienaCesSyncPTPInputAnnounceRxLossNum
1.3.6.1.4.1.1271.2.1.28.1.1.8.2.2
cienaCesSyncPTPInputAnnounceTxRateReq
1.3.6.1.4.1.1271.2.1.28.1.1.8.2.3
cienaCesSyncPTPInputSyncTxRateReq
1.3.6.1.4.1.1271.2.1.28.1.1.8.2.4
cienaCesSyncPTPInputDelayReqTxRate
1.3.6.1.4.1.1271.2.1.28.1.1.8.2.5
cienaCesSyncGPSOutput1ppsPulseWidth
Description and OID
1.3.6.1.4.1.1271.2.1.28.1.1.9.1.1
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
13-12 CIENA-CES-TIME-SYNC-MIB
cienaCesSyncInputPUStateChangeNotification
Sent when a timing reference source failed.
Object Identifier: 1.3.6.1.4.1.1271.2.2.28.0.1
Status: current
Supported Platforms: 3930, 3931, 3932, 5142, 5150, 5160
cienaCesSyncInputProtectionGroupStateChangeNotification
Sent when system timing could not lock into a reference source and entered
hold over state.
Object Identifier: 1.3.6.1.4.1.1271.2.2.28.0.2
Status: current
Supported Platforms: 3930, 3931, 3932, 5142, 5150, 5160
MIB Reference
009-3220-011 Standard Revision A
August 2013
14-1
CIENA-CES-VLLI-MIB
1-
This chapter provides the object definitions and notifications for the CIENACES-VLLI-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
cienaCesVlliAdminState
Description and OID
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
accessible-fornotify
1.3.6.1.4.1.1271.2.1.23.1.1.1
cienaCesVlliInstanceGroupTable
1.3.6.1.4.1.1271.2.1.23.1.1.2
cienaCesVlliInstanceGroupEntry
1.3.6.1.4.1.1271.2.1.23.1.1.2.1
cienaCesVlliInstanceGroupId
1.3.6.1.4.1.1271.2.1.23.1.1.2.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
14-2 CIENA-CES-VLLI-MIB
cienaCesVlliInstanceGroupName
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
any -single source can trigger action. all - all sources should be in the same
state to trigger action.
current
read-only
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.1271.2.1.23.1.1.2.1.2
cienaCesVlliInstanceGroupDirection
1.3.6.1.4.1.1271.2.1.23.1.1.2.1.3
cienaCesVlliInstanceGroupTrigger
1.3.6.1.4.1.1271.2.1.23.1.1.2.1.4
cienaCesVlliInstanceGroupState
1.3.6.1.4.1.1271.2.1.23.1.1.2.1.5
cienaCesVlliActionGroupTable
1.3.6.1.4.1.1271.2.1.23.1.1.3
cienaCesVlliActionGroupEntry
1.3.6.1.4.1.1271.2.1.23.1.1.3.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-VLLI-MIB 14-3
cienaCesVlliActionGroupId
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.23.1.1.3.1.1
cienaCesVlliActionGroupName
1.3.6.1.4.1.1271.2.1.23.1.1.3.1.2
cienaCesVlliActRecoveryPreceOne
1.3.6.1.4.1.1271.2.1.23.1.1.3.1.3
cienaCesVlliActRecoveryPreceTwo
1.3.6.1.4.1.1271.2.1.23.1.1.3.1.4
cienaCesVlliActRecoveryPreceThree
1.3.6.1.4.1.1271.2.1.23.1.1.3.1.5
cienaCesVlliActRecoveryPreceFour
1.3.6.1.4.1.1271.2.1.23.1.1.3.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
14-4 CIENA-CES-VLLI-MIB
cienaCesVlliActRecoveryPreceFive
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.23.1.1.3.1.7
cienaCesVlliActRecoveryPreceSix
1.3.6.1.4.1.1271.2.1.23.1.1.3.1.8
cienaCesVlliActRecoveryPreceSeven
1.3.6.1.4.1.1271.2.1.23.1.1.3.1.9
cienaCesVlliActRecoveryPreceEight
1.3.6.1.4.1.1271.2.1.23.1.1.3.1.10
cienaCesVlliActFaultPreceOne
1.3.6.1.4.1.1271.2.1.23.1.1.3.1.11
cienaCesVlliActFaultPreceTwo
1.3.6.1.4.1.1271.2.1.23.1.1.3.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-VLLI-MIB 14-5
cienaCesVlliActFaultPreceThree
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.23.1.1.3.1.13
cienaCesVlliActFaultPreceFour
1.3.6.1.4.1.1271.2.1.23.1.1.3.1.14
cienaCesVlliActFaultPreceFive
1.3.6.1.4.1.1271.2.1.23.1.1.3.1.15
cienaCesVlliActFaultPreceSix
1.3.6.1.4.1.1271.2.1.23.1.1.3.1.16
cienaCesVlliActFaultPreceSeven
1.3.6.1.4.1.1271.2.1.23.1.1.3.1.17
cienaCesVlliActFaultPreceEight
1.3.6.1.4.1.1271.2.1.23.1.1.3.1.18
MIB Reference
009-3220-011 Standard Revision A
August 2013
14-6 CIENA-CES-VLLI-MIB
cienaCesVlliInstanceTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
accessible-fornotify
Status
Access
current
accessible-fornotify
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.23.1.1.4
cienaCesVlliInstanceEntry
1.3.6.1.4.1.1271.2.1.23.1.1.4.1
cienaCesVlliInstanceGrpId
1.3.6.1.4.1.1271.2.1.23.1.1.4.1.1
cienaCesVlliInstanceId
1.3.6.1.4.1.1271.2.1.23.1.1.4.1.2
cienaCesVlliInstanceMode
1.3.6.1.4.1.1271.2.1.23.1.1.4.1.3
cienaCesVlliInstanceType
1.3.6.1.4.1.1271.2.1.23.1.1.4.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
CIENA-CES-VLLI-MIB 14-7
cienaCesVlliInstanceName
Description and OID
Status
Access
current
read-only
Status
Access
The action group name is used to bind with this instance level.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.1271.2.1.23.1.1.4.1.5
cienaCesVlliInstanceActionName
1.3.6.1.4.1.1271.2.1.23.1.1.4.1.6
cienaCesVlliInstanceLastEvent
1.3.6.1.4.1.1271.2.1.23.1.1.4.1.7
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
cienaCesVlliFaultTrap
A notification is sent whenever the instance fault action is triggered.
Object Identifier: 1.3.6.1.4.1.1271.2.2.99.0.1
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
cienaCesVlliRecoveryTrap
A notification is sent whenever the instance recovery action is triggered.
Object Identifier: 1.3.6.1.4.1.1271.2.2.99.0.2
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
MIB Reference
009-3220-011 Standard Revision A
August 2013
15-1
CIENA-GLOBAL-MIB
1-
This chapter provides the object definitions and notifications for the CIENAGLOBAL-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
cienaGlobalSeverity
Description and OID
Status
This object defines the severity of a trap and is a part of every trap defined in current
the system.
Access
accessible-fornotify
1.3.6.1.4.1.1271.1.3.1
cienaGlobalMacAddress
Description and OID
Status
Access
current
accessible-fornotify
1.3.6.1.4.1.1271.1.3.2
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
16-1
CIENA-SMI
1-
This chapter provides the object identifier names and descriptions for the
CIENA-SMI module.
Name
cienaCommon
cienaProducts
cienaCes
cienaCesConfig
cienaCesNotifications
cienaCesNotificationsControlModule
cienaCesStatistics
MIB Reference
009-3220-011 Standard Revision A
August 2013
17-1
CIENA-TC
2-
This chapter provides the text convention names and descriptions for the
CIENA-TC module.
Name
Description
CienaGlobalSeverity
CienaGlobalState
CienaMacAddress
CienaStatsClear
MIB Reference
009-3220-011 Standard Revision A
August 2013
17-2 CIENA-TC
MIB Reference
009-3220-011 Standard Revision A
August 2013
18-1
IEEE8023-LAG-MIB
1-
This chapter provides the object definitions and notifications for the
IEEE8023-LAG-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
dot3adAggTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
The unique identifier allocated to this Aggregator by the local System. This
attribute identifies an Aggregator instance among the subordinate managed
objects of the containing object. This value is read-only.
current
not-accessible
1.2.840.802.10006.300.43.1.1.1
dot3adAggEntry
1.2.840.802.10006.300.43.1.1.1.1
dot3adAggIndex
1.2.840.802.10006.300.43.1.1.1.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
18-2 IEEE8023-LAG-MIB
dot3adAggMACAddress
Description and OID
Status
Access
A 6-octet read-only value carrying the individual MAC address assigned to the current
Aggregator.
read-only
1.2.840.802.10006.300.43.1.1.1.1.2
dot3adAggActorSystemPriority
Description and OID
Status
Access
A 2-octet read-write value indicating the priority value associated with the
Actor's System ID.
current
read-write
Status
Access
current
A 6-octet read-write MAC address value used as a unique identifier for the
System that contains this Aggregator. NOTE-From the perspective of the Link
Aggregation mechanisms described in Clause 43, only a single combination of
Actor's System ID and System Priority are considered, and no distinction is
made between the values of these parameters for an Aggregator and the
port(s) that are associated with it; i.e., the protocol is described in terms of the
operation of aggregation within a single System. However, the managed
objects provided for the Aggregator and the port both allow management of
these parameters. The result of this is to permit a single piece of equipment to
be configured by management to contain more than one System from the point
of view of the operation of Link Aggregation. This may be of particular use in
the configuration of equipment that has limited aggregation capability (see
43.6).
read-only
1.2.840.802.10006.300.43.1.1.1.1.3
dot3adAggActorSystemID
Description and OID
1.2.840.802.10006.300.43.1.1.1.1.4
dot3adAggAggregateOrIndividual
Description and OID
Status
Access
current
read-only
1.2.840.802.10006.300.43.1.1.1.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
IEEE8023-LAG-MIB 18-3
dot3adAggActorAdminKey
Description and OID
Status
current
The current administrative value of the Key for the Aggregator. The
administrative Key value may differ from the operational Key value for the
reasons discussed in 43.6.2. This is a 16-bit, read-write value. The meaning of
particular Key values is of local significance.
Access
read-write
1.2.840.802.10006.300.43.1.1.1.1.6
dot3adAggActorOperKey
Description and OID
Status
Access
The current operational value of the Key for the Aggregator. The administrative current
Key value may differ from the operational Key value for the reasons discussed
in 43.6.2. This is a 16-bit read-only value. The meaning of particular Key
values is of local significance.
read-only
1.2.840.802.10006.300.43.1.1.1.1.7
dot3adAggPartnerSystemID
Description and OID
Status
Access
A 6-octet read-only MAC address value consisting of the unique identifier for
the current protocol Partner of this Aggregator. A value of zero indicates that
there is no known Partner. If the aggregation is manually configured, this
System ID value will be a value assigned by the local System.
current
read-only
Status
Access
A 2-octet read-only value that indicates the priority value associated with the
Partner's System ID. If the aggregation is manually configured, this System
Priority value will be a value assigned by the local System.
current
read-only
Status
Access
The current operational value of the Key for the Aggregator's current protocol current
Partner. This is a 16-bit read-only value. If the aggregation is manually
configured, this Key value will be a value assigned by the local System.
read-only
1.2.840.802.10006.300.43.1.1.1.1.8
dot3adAggPartnerSystemPriority
1.2.840.802.10006.300.43.1.1.1.1.9
dot3adAggPartnerOperKey
Description and OID
1.2.840.802.10006.300.43.1.1.1.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
18-4 IEEE8023-LAG-MIB
dot3adAggCollectorMaxDelay
Description and OID
Status
The value of this 16-bit read-write attribute defines the maximum delay, in tens current
of microseconds, that may be imposed by the Frame Collector between
receiving a frame from an Aggregator Parser, and either delivering the frame
to its MAC Client or discarding the frame (see 43.2.3.1.1).
Access
read-write
1.2.840.802.10006.300.43.1.1.1.1.11
dot3adAggPortListTable
Description and OID
Status
Access
A table that contains a list of all the ports associated with each Aggregator.
current
not-accessible
Status
Access
A list of the ports associated with a given Aggregator. This is indexed by the
ifIndex of the Aggregator.
current
not-accessible
Status
Access
The complete set of ports currently associated with this Aggregator. Each bit current
set in this list represents an Actor Port member of this Link Aggregation.
read-only
1.2.840.802.10006.300.43.1.1.2
dot3adAggPortListEntry
1.2.840.802.10006.300.43.1.1.2.1
dot3adAggPortListPorts
Description and OID
1.2.840.802.10006.300.43.1.1.2.1.1
dot3adAggPortTable
Description and OID
Status
A table that contains Link Aggregation Control configuration information about current
every Aggregation Port associated with this device. A row appears in this table
for each physical port.
Access
not-accessible
1.2.840.802.10006.300.43.1.2.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
IEEE8023-LAG-MIB 18-5
dot3adAggPortEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
1.2.840.802.10006.300.43.1.2.1.1
dot3adAggPortIndex
1.2.840.802.10006.300.43.1.2.1.1.1
dot3adAggPortActorSystemPriority
Description and OID
A 2-octet read-write value used to define the priority value associated with the current
Actor's System ID.
read-write
1.2.840.802.10006.300.43.1.2.1.1.2
dot3adAggPortActorSystemID
Description and OID
Status
Access
A 6-octet read-only MAC address value that defines the value of the System
ID for the System that contains this Aggregation Port.
current
read-only
Status
Access
1.2.840.802.10006.300.43.1.2.1.1.3
dot3adAggPortActorAdminKey
Description and OID
The current administrative value of the Key for the Aggregation Port. This is a current
16-bit read-write value. The meaning of particular Key values is of local
significance.
read-write
1.2.840.802.10006.300.43.1.2.1.1.4
dot3adAggPortActorOperKey
Description and OID
Status
Access
The current operational value of the Key for the Aggregation Port. This is a 16- current
bit read-only value. The meaning of particular Key values is of local
significance.
read-only
1.2.840.802.10006.300.43.1.2.1.1.5
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
18-6 IEEE8023-LAG-MIB
dot3adAggPortPartnerAdminSystemPriority
Description and OID
Status
Access
current
read-write
Status
Access
A 2-octet read-only value indicating the operational value of priority associated current
with the Partner's System ID. The value of this attribute may contain the
manually configured value carried in aAggPortPartnerAdminSystemPriority if
there is no protocol Partner.
read-only
1.2.840.802.10006.300.43.1.2.1.1.6
dot3adAggPortPartnerOperSystemPriority
Description and OID
1.2.840.802.10006.300.43.1.2.1.1.7
dot3adAggPortPartnerAdminSystemID
Description and OID
Status
Access
read-write
1.2.840.802.10006.300.43.1.2.1.1.8
dot3adAggPortPartnerOperSystemID
Description and OID
Status
Access
A 6-octet read-only MACAddress value representing the current value of the current
Aggregation Port's protocol Partner's System ID. A value of zero indicates that
there is no known protocol Partner. The value of this attribute may contain the
manually configured value carried in aAggPortPartnerAdminSystemID if there
is no protocol Partner.
read-only
1.2.840.802.10006.300.43.1.2.1.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
IEEE8023-LAG-MIB 18-7
dot3adAggPortPartnerAdminKey
Description and OID
Status
The current administrative value of the Key for the protocol Partner. This is a current
16-bit read-write value. The assigned value is used, along with the value of
aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID,
aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order
to achieve manually configured aggregation.
Access
read-write
1.2.840.802.10006.300.43.1.2.1.1.10
dot3adAggPortPartnerOperKey
Description and OID
Status
Access
The current operational value of the Key for the protocol Partner. The value of current
this attribute may contain the manually configured value carried in
aAggPortPartnerAdminKey if there is no protocol Partner. This is a 16-bit readonly value.
read-only
1.2.840.802.10006.300.43.1.2.1.1.11
dot3adAggPortSelectedAggID
Description and OID
Status
Access
The identifier value of the Aggregator that this Aggregation Port has currently current
selected. Zero indicates that the Aggregation Port has not selected an
Aggregator, either because it is in the process of detaching from an Aggregator
or because there is no suitable Aggregator available for it to select. This value
is read-only.
read-only
1.2.840.802.10006.300.43.1.2.1.1.12
dot3adAggPortAttachedAggID
Description and OID
Status
Access
The identifier value of the Aggregator that this Aggregation Port is currently
current
attached to. Zero indicates that the Aggregation Port is not currently attached
to an Aggregator. This value is read-only.
read-only
1.2.840.802.10006.300.43.1.2.1.1.13
dot3adAggPortActorPort
Description and OID
Status
Access
The port number locally assigned to the Aggregation Port. The port number is current
communicated in LACPDUs as the Actor_Port. This value is read-only.
read-only
1.2.840.802.10006.300.43.1.2.1.1.14
MIB Reference
009-3220-011 Standard Revision A
August 2013
18-8 IEEE8023-LAG-MIB
dot3adAggPortActorPortPriority
Description and OID
Status
The priority value assigned to this Aggregation Port. This 16-bit value is read- current
write.
Access
read-write
1.2.840.802.10006.300.43.1.2.1.1.15
dot3adAggPortPartnerAdminPort
Description and OID
Status
Access
The current administrative value of the port number for the protocol Partner.
This is a 16-bit read-write value. The assigned value is used, along with the
value of aAggPortPartnerAdminSystemPriority,
aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, and
aAggPortPartnerAdminPortPriority, in order to achieve manually configured
aggregation.
current
read-write
Status
Access
current
The operational port number assigned to this Aggregation Port by the
Aggregation Port's protocol Partner. The value of this attribute may contain the
manually configured value carried in aAggPortPartnerAdminPort if there is no
protocol Partner. This 16-bit value is read-only.
read-only
1.2.840.802.10006.300.43.1.2.1.1.16
dot3adAggPortPartnerOperPort
Description and OID
1.2.840.802.10006.300.43.1.2.1.1.17
dot3adAggPortPartnerAdminPortPriority
Description and OID
Status
Access
The current administrative value of the port priority for the protocol Partner.
This is a 16-bit read-write value. The assigned value is used, along with the
value of aAggPortPartnerAdminSystemPriority,
aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, and
aAggPortPartnerAdminPort, in order to achieve manually configured
aggregation.
current
read-write
1.2.840.802.10006.300.43.1.2.1.1.18
MIB Reference
009-3220-011 Standard Revision A
August 2013
IEEE8023-LAG-MIB 18-9
dot3adAggPortPartnerOperPortPriority
Description and OID
Status
Access
The priority value assigned to this Aggregation Port by the Partner. The value current
of this attribute may contain the manually configured value carried in
aAggPortPartnerAdminPortPriority if there is no protocol Partner. This 16-bit
value is read-only.
read-only
1.2.840.802.10006.300.43.1.2.1.1.19
dot3adAggPortActorAdminState
Description and OID
Status
current
A string of 8 bits, corresponding to the administrative values of Actor_State
(43.4.2) as transmitted by the Actor in LACPDUs. The first bit corresponds to
bit 0 of Actor_State (LACP_Activity), the second bit corresponds to bit 1
(LACP_Timeout), the third bit corresponds to bit 2 (Aggregation), the fourth bit
corresponds to bit 3 (Synchronization), the fifth bit corresponds to bit 4
(Collecting), the sixth bit corresponds to bit 5 (Distributing), the seventh bit
corresponds to bit 6 (Defaulted), and the eighth bit corresponds to bit 7
(Expired). These values allow administrative control over the values of
LACP_Activity, LACP_Timeout and Aggregation. This attribute value is readwrite.
Access
read-write
1.2.840.802.10006.300.43.1.2.1.1.20
dot3adAggPortActorOperState
Description and OID
Status
Access
current
read-only
Status
Access
current
read-write
1.2.840.802.10006.300.43.1.2.1.1.21
dot3adAggPortPartnerAdminState
1.2.840.802.10006.300.43.1.2.1.1.22
MIB Reference
009-3220-011 Standard Revision A
August 2013
18-10 IEEE8023-LAG-MIB
dot3adAggPortPartnerOperState
Description and OID
Status
Access
current
A string of 8 bits, corresponding to the current values of Actor_State in the
most recently received LACPDU transmitted by the protocol Partner. The bit
allocations are as defined in 30.7.2.1.20. In the absence of an active protocol
Partner, this value may reflect the manually configured value
aAggPortPartnerAdminState. This attribute value is read-only.
read-only
1.2.840.802.10006.300.43.1.2.1.1.23
dot3adAggPortAggregateOrIndividual
Description and OID
Status
Access
A read-only Boolean value indicating whether the Aggregation Port is able to current
Aggregate (`TRUE') or is only able to operate as an Individual link (`FALSE').
read-only
1.2.840.802.10006.300.43.1.2.1.1.24
dot3adAggPortStatsTable
Description and OID
Status
A table that contains Link Aggregation information about every port that is
current
associated with this device. A row appears in this table for each physical port.
Access
not-accessible
1.2.840.802.10006.300.43.1.2.2
dot3adAggPortStatsEntry
Description and OID
Status
Access
A list of Link Aggregation Control Protocol statistics for each port on this
device.
current
not-accessible
Status
Access
The number of valid LACPDUs received on this Aggregation Port. This value current
is read-only.
read-only
1.2.840.802.10006.300.43.1.2.2.1
dot3adAggPortStatsLACPDUsRx
Description and OID
1.2.840.802.10006.300.43.1.2.2.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
IEEE8023-LAG-MIB 18-11
dot3adAggPortStatsMarkerPDUsRx
Description and OID
Status
Access
The number of valid Marker PDUs received on this Aggregation Port. This
value is read-only.
current
read-only
Status
Access
current
read-only
Status
Access
The number of frames received that either: - carry the Slow Protocols Ethernet current
Type value (43B.4), but contain an unknown PDU, or: - are addressed to the
Slow Protocols group MAC Address (43B.3), but do not carry the Slow
Protocols Ethernet Type. This value is read-only.
read-only
1.2.840.802.10006.300.43.1.2.2.1.2
dot3adAggPortStatsMarkerResponsePDUsRx
1.2.840.802.10006.300.43.1.2.2.1.3
dot3adAggPortStatsUnknownRx
Description and OID
1.2.840.802.10006.300.43.1.2.2.1.4
dot3adAggPortStatsIllegalRx
Description and OID
Status
Access
The number of frames received that carry the Slow Protocols Ethernet Type current
value (43B.4), but contain a badly formed PDU or an illegal value of Protocol
Subtype (43B.4). This value is read-only.
read-only
1.2.840.802.10006.300.43.1.2.2.1.5
dot3adAggPortStatsLACPDUsTx
Description and OID
Status
Access
current
read-only
1.2.840.802.10006.300.43.1.2.2.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
18-12 IEEE8023-LAG-MIB
dot3adAggPortStatsMarkerPDUsTx
Description and OID
Status
Access
The number of Marker PDUs transmitted on this Aggregation Port. This value current
is read-only.
read-only
1.2.840.802.10006.300.43.1.2.2.1.7
dot3adAggPortStatsMarkerResponsePDUsTx
Description and OID
Status
Access
The number of Marker Response PDUs transmitted on this Aggregation Port. current
This value is read-only.
read-only
1.2.840.802.10006.300.43.1.2.2.1.8
dot3adAggPortDebugTable
Description and OID
Status
A table that contains Link Aggregation debug information about every port that current
is associated with this device. A row appears in this table for each physical
port.
Access
not-accessible
1.2.840.802.10006.300.43.1.2.3
dot3adAggPortDebugEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
This attribute holds the value `currentRx' if the Receive state machine for the current
Aggregation Port is in the CURRENT state, `expired' if the Receive state
machine is in the EXPIRED state, `defaulted' if the Receive state machine is in
the DEFAULTED state, `initialize' if the Receive state machine is in the
INITIALIZE state, `lacpDisabled' if the Receive state machine is in the
LACP_DISABLED state, or `portDisabled' if the Receive state machine is in
the PORT_DISABLED state. This value is read-only.
read-only
1.2.840.802.10006.300.43.1.2.3.1
dot3adAggPortDebugRxState
Description and OID
1.2.840.802.10006.300.43.1.2.3.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
IEEE8023-LAG-MIB 18-13
dot3adAggPortDebugLastRxTime
Description and OID
Status
Access
current
read-only
Status
Access
This attribute holds the value `detached' if the Mux state machine (43.4.14) for current
the Aggregation Port is in the DETACHED state, `waiting' if the Mux state
machine is in the WAITING state, `attached' if the Mux state machine for the
Aggregation Port is in the ATTACHED state, `collecting' if the Mux state
machine for the Aggregation Port is in the COLLECTING state, `distributing' if
the Mux state machine for the Aggregation Port is in the DISTRIBUTING state,
and `collectingDistributing' if the Mux state machine for the Aggregation Port is
in the COLLECTING_DISTRIBUTING state. This value is read-only.
read-only
1.2.840.802.10006.300.43.1.2.3.1.2
dot3adAggPortDebugMuxState
Description and OID
1.2.840.802.10006.300.43.1.2.3.1.3
dot3adAggPortDebugMuxReason
Description and OID
Status
Access
A human-readable text string indicating the reason for the most recent change current
of Mux machine state. This value is read-only.
read-only
1.2.840.802.10006.300.43.1.2.3.1.4
dot3adAggPortDebugActorChurnState
Description and OID
Status
Access
The state of the Actor Churn Detection machine (43.4.17) for the Aggregation current
Port. A value of `noChurn' indicates that the state machine is in either the
NO_ACTOR_CHURN or the ACTOR_CHURN_MONITOR state, and `churn'
indicates that the state machine is in the ACTOR_CHURN state. This value is
read-only.
read-only
1.2.840.802.10006.300.43.1.2.3.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
18-14 IEEE8023-LAG-MIB
dot3adAggPortDebugPartnerChurnState
Description and OID
Status
Access
The state of the Partner Churn Detection machine (43.4.17) for the
Aggregation Port. A value of `noChurn' indicates that the state machine is in
either the NO_PARTNER_CHURN or the PARTNER_CHURN_MONITOR
state, and `churn' indicates that the state machine is in the
PARTNER_CHURN state. This value is read-only.
current
read-only
Status
Access
Count of the number of times the Actor Churn state machine has entered the current
ACTOR_CHURN state. This value is read-only.
read-only
1.2.840.802.10006.300.43.1.2.3.1.6
dot3adAggPortDebugActorChurnCount
Description and OID
1.2.840.802.10006.300.43.1.2.3.1.7
dot3adAggPortDebugPartnerChurnCount
Description and OID
Status
Access
Count of the number of times the Partner Churn state machine has entered the current
PARTNER_CHURN state. This value is read-only.
read-only
1.2.840.802.10006.300.43.1.2.3.1.8
dot3adAggPortDebugActorSyncTransitionCount
Description and OID
Status
Access
Count of the number of times the Actor's Mux state machine (43.4.15) has
entered the IN_SYNC state. This value is read-only.
current
read-only
Status
Access
Count of the number of times the Partner's Mux state machine (43.4.15) has
entered the IN_SYNC state. This value is read-only.
current
read-only
1.2.840.802.10006.300.43.1.2.3.1.9
dot3adAggPortDebugPartnerSyncTransitionCount
1.2.840.802.10006.300.43.1.2.3.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
IEEE8023-LAG-MIB 18-15
dot3adAggPortDebugActorChangeCount
Description and OID
Status
Access
Count of the number of times the Actor's perception of the LAG ID for this
Aggregation Port has changed. This value is read-only.
current
read-only
Status
Access
Count of the number of times the Partner's perception of the LAG ID (see
43.3.6.1) for this Aggregation Port has changed. This value is read-only.
current
read-only
Status
Access
This object indicates the time of the most recent change to the
dot3adAggTable, dot3adAggPortListTable, or dot3adAggPortTable.
current
read-only
1.2.840.802.10006.300.43.1.2.3.1.11
dot3adAggPortDebugPartnerChangeCount
1.2.840.802.10006.300.43.1.2.3.1.12
dot3adTablesLastChanged
1.2.840.802.10006.300.43.1.3
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
19-1
RSTP-MIB
1-
This chapter provides the object definitions and notifications for the RSTPMIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
dot1dStpVersion
Description and OID
Status
current
The version of Spanning Tree Protocol the bridge is currently running. The
value 'stpCompatible(0)' indicates the Spanning Tree Protocol specified in
IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning Tree Protocol
specified in IEEE 802.1w. New value may be defined as future versions of the
protocol become available.
Access
read-write
1.3.6.1.2.1.17.2.16
dot1dStpPathCostDefault
Description and OID
Status
The version of the Spanning Tree default Path Costs that are to be used by this current
Bridge. A value of 8021d1998(1) uses the 16-bit default Path Costs from IEEE
Std. 802.1D-1998. A value of stp8021t2001(2) uses the 32-bit default Path
Costs from IEEE Std. 802.1t.
Access
read-write
1.3.6.1.2.1.17.2.17
dot1dStpExtPortTable
Description and OID
Status
Access
current
not-accessible
1.3.6.1.2.1.17.2.18
MIB Reference
009-3220-011 Standard Revision A
August 2013
19-2 RSTP-MIB
dot1dStpExtPortEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
The operational value of the Edge Port parameter. The object is initialized to current
the value of dot1dStpPortAdminEdgePort and is set FALSE on reception of a
BPDU.
read-only
1.3.6.1.2.1.17.2.18.1
dot1dStpPortProtocolMigration
1.3.6.1.2.1.17.2.18.1.1
dot1dStpPortAdminEdgePort
1.3.6.1.2.1.17.2.18.1.2
dot1dStpPortOperEdgePort
Description and OID
1.3.6.1.2.1.17.2.18.1.3
dot1dStpPortAdminPointToPoint
Description and OID
Status
The administrative point-to-point status of the LAN segment attached to this current
port. A value of forceTrue(0) indicates that this port should always be treated
as if it is connected to a point-to-point link. A value of forceFalse(1) indicates
that this port should be treated as having a shared media connection. A value
of auto(2) indicates that this port is considered to have a point-to-point link if it
is an Aggregator and all of its members are aggregatable, or if the MAC entity
is configured for full duplex operation, either through auto-negotiation or by
management means.
Access
read-write
1.3.6.1.2.1.17.2.18.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
RSTP-MIB 19-3
dot1dStpPortOperPointToPoint
Description and OID
Status
Access
The operational point-to-point status of the LAN segment attached to this port. current
It indicates whether a port is considered to have a point-to-point connection or
not. The value is determined by management or by auto-detection, as
described in the dot1dStpPortAdminPointToPoint object.
read-only
1.3.6.1.2.1.17.2.18.1.5
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
20-1
WWP-EXT-BRIDGE-MIB
1-
This chapter provides the object definitions and notifications for the WWPEXT-BRIDGE-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpPortTable
Description and OID
Status
Access
Table of Ports.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
Port ID for the instance. Port ID's start at 1, and are consecutive for each
additional port. This port Id should
refer to the dot1dBasePort in the
Dot1dBasePortEntry.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.4.1.1.1
wwpPortEntry
1.3.6.1.4.1.6141.2.4.1.1.1.1
wwpPortId
1.3.6.1.4.1.6141.2.4.1.1.1.1.1
wwpPortType
1.3.6.1.4.1.6141.2.4.1.1.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
20-2 WWP-EXT-BRIDGE-MIB
wwpPortName
Description and OID
Status
Access
current
read-write
Status
Access
The ethernet MAC address for the port. This information can also be found in current
dot1dTpFdbTable
read-only
1.3.6.1.4.1.6141.2.4.1.1.1.1.3
wwpPortPhysAddr
Description and OID
1.3.6.1.4.1.6141.2.4.1.1.1.1.4
wwpPortAutoNeg
Description and OID
Status
The object sets the port to AUTO-NEG MODE and vice versa. Specific
current
platforms may have requirements of configuring speed before moving the port
out of AUTO-NEG mode.
Access
read-write
1.3.6.1.4.1.6141.2.4.1.1.1.1.5
wwpPortAdminStatus
Description and OID
Status
Access
current
read-write
Status
Access
current
read-only
Status
Access
Desired speed of the port. Set the port speed to be either 10MB, 100MB, or
gig. The Management Station cannot set the wwpPortAdminSpeed to 'auto'.
The default value for this object depends upon the platform.
current
read-write
1.3.6.1.4.1.6141.2.4.1.1.1.1.6
wwpPortOperStatus
1.3.6.1.4.1.6141.2.4.1.1.1.1.7
wwpPortAdminSpeed
1.3.6.1.4.1.6141.2.4.1.1.1.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-EXT-BRIDGE-MIB 20-3
wwpPortOperSpeed
Description and OID
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.4.1.1.1.1.9
wwpPortAdminDuplex
Description and OID
current
The desired mode for the port. It can be set to either 'half' or 'full' duplex
operation but not to 'auto'.The default value for this object depends upon the
platform.
read-write
1.3.6.1.4.1.6141.2.4.1.1.1.1.10
wwpPortOperDuplex
Description and OID
Status
Access
current
read-only
Status
Access
Configures the ports flow control operation. Need to check 802.3x for
additional modes for gig ports.
current
read-write
Status
Access
current
read-only
Status
Access
The port tagged Status can be set to tagged or untagged. If a port is part of
more than one VLAN, then the port Status should be 'tagged'.
current
read-write
1.3.6.1.4.1.6141.2.4.1.1.1.1.11
wwpPortAdminFlowCtrl
1.3.6.1.4.1.6141.2.4.1.1.1.1.12
wwpPortOperFlowCtrl
1.3.6.1.4.1.6141.2.4.1.1.1.1.13
wwpPortTagged
1.3.6.1.4.1.6141.2.4.1.1.1.1.14
MIB Reference
009-3220-011 Standard Revision A
August 2013
20-4 WWP-EXT-BRIDGE-MIB
wwpPortUntaggedPriority
Description and OID
Status
The 802.1p packet priority to be assigned to packets associated with this port current
that do not have an 802.1Q VLAN header.
Access
read-write
1.3.6.1.4.1.6141.2.4.1.1.1.1.15
wwpPortMaxFrameSize
Description and OID
Status
Setting this object sets the max frame size allowed on a port. The max frame current
size can vary between 1522 bytes to 9216 bytes. Default value is 1522 bytes
Access
read-write
1.3.6.1.4.1.6141.2.4.1.1.1.1.16
wwpPortIngressFiltering
Description and OID
Status
When this is true(1) the device discards incoming frames for VLANs that do not current
include this Port in its Member set. When false(2), the port accepts all
incoming frames.
Access
read-write
1.3.6.1.4.1.6141.2.4.1.1.1.1.17
wwpPortRateLimitState
Description and OID
Status
Access
When set to true, the rate limiting mechanism is enabled for this port. When
set to false, the rate limiting mechanism is disabled for this port.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.4.1.1.1.1.18
wwpPortRateLimitValue
Description and OID
The value of this object represents the desired bit-rate limit for this port. When current
the rate limiting mechanism is enabled for this port, this value is enforced to the
best extent possible by the device. For some devices the actual maximum bitrate allowed may exceed the rate limit parameter due to hardware andsoftware
limitations.
read-write
1.3.6.1.4.1.6141.2.4.1.1.1.1.19
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-EXT-BRIDGE-MIB 20-5
wwpLocalMgmtPortEnable
Description and OID
Status
Setting this object to false(2) disables the local management port. The object deprecated
has been deprecated as we need to have the general functionality of disabling
and enabling any in-band and out-band management interface.
Access
read-write
1.3.6.1.4.1.6141.2.4.1.1.2
wwpVlanVersionNumber
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The maximum number of IEEE 802.1Q VLANs that this device supports.
current
read-only
Status
Access
The current number of IEEE 802.1Q VLANs that are configured in this device. current
read-only
1.3.6.1.4.1.6141.2.4.1.2.1
wwpMaxVlanId
1.3.6.1.4.1.6141.2.4.1.2.2
wwpMaxSupportedVlans
1.3.6.1.4.1.6141.2.4.1.2.3
wwpNumVlans
Description and OID
1.3.6.1.4.1.6141.2.4.1.2.4
wwpVlanTable
Description and OID
Status
Access
VLAN table
current
not-accessible
1.3.6.1.4.1.6141.2.4.1.2.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
20-6 WWP-EXT-BRIDGE-MIB
wwpVlanEntry
Description and OID
Status
Access
table of VLANs
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.4.1.2.5.1
wwpVlanId
1.3.6.1.4.1.6141.2.4.1.2.5.1.1
wwpVlanName
1.3.6.1.4.1.6141.2.4.1.2.5.1.2
wwpVlanCurrentEgressPorts
Description and OID
The set of ports which are transmitting traffic for this VLAN as either tagged or current
untagged frames.
read-write
1.3.6.1.4.1.6141.2.4.1.2.5.1.3
wwpVlanCurrentUntaggedPorts
Description and OID
Status
Access
The set of ports which are transmitting traffic for this VLAN as untagged
frames.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.4.1.2.5.1.4
wwpVlanMgmtStatus
Description and OID
Indicates if this VLAN is a management VLAN. The system can have at most current
one remote management VLAN, and one local management VLAN. Any VLAN
can be set either to remoteMgmtVlan or
localMgmtvlan.
read-write
1.3.6.1.4.1.6141.2.4.1.2.5.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-EXT-BRIDGE-MIB 20-7
wwpVlanRowStatus
Description and OID
Status
current
Used to manage the creation and deletion of the conceptual rows in this table.
To create a row in this table, a manager must
set this object to
'createAndGo'. To delete a row in this
table, there should not be any port
associated with this VLAN.
Access
read-write
1.3.6.1.4.1.6141.2.4.1.2.5.1.6
wwpVlanXTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.4.1.2.6
wwpVlanXEntry
1.3.6.1.4.1.6141.2.4.1.2.6.1
wwpVlanTunnel
1.3.6.1.4.1.6141.2.4.1.2.6.1.1
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
21-1
WWP-EXT-BRIDGE-TRAP-MIB
1-
This chapter provides the object definitions and notifications for the WWPEXT-BRIDGE-TRAP-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpStndLinkUpDownTrapsEnable
Description and OID
Status
Access
current
read-write
Status
Access
Setting this object to 'true(1)' causes wwp specific port up down trap to be
generated.
current
read-write
1.3.6.1.4.1.6141.2.41.1.1
wwpLinkUpDownTrapsEnable
1.3.6.1.4.1.6141.2.41.1.2
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
wwpLinkUp
A wwpLinkUp trap signifies that the SNMP entity, acting in an agent role, has
detected that the ifOperStatus object for one of its communication links has
entered the up state.
Object Identifier: 1.3.6.1.4.1.6141.2.41.2.0.1
Status: current
MIB Reference
009-3220-011 Standard Revision A
August 2013
21-2 WWP-EXT-BRIDGE-TRAP-MIB
wwpLinkDown
A wwpLinkDown trap signifies that the SNMP entity, acting in an agent role,
has detected that the ifOperStatus object for one of its communication links
has entered the down state.
Object Identifier: 1.3.6.1.4.1.6141.2.41.2.0.2
Status: current
Supported Platforms: none
MIB Reference
009-3220-011 Standard Revision A
August 2013
22-1
WWP-LEOS-8021X-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-8021X-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeos8021xPortTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.401.1.2.1
wwpLeos8021xPortEntry
1.3.6.1.4.1.6141.2.60.401.1.2.1.1
wwpLeos8021xPort
1.3.6.1.4.1.6141.2.60.401.1.2.1.1.1
wwpLeos8021xRole
1.3.6.1.4.1.6141.2.60.401.1.2.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
22-2 WWP-LEOS-8021X-MIB
wwpLeos8021xAuthPortStatsClear
Description and OID
Status
Access
Setting this MIB object to 'true' clears the authenticator port statistics.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.401.1.2.1.1.3
wwpLeos8021xSuppTable
Description and OID
current
A table that contains the configuration objects for the Supplicant PAE
associated with each port. An entry appears in this table for each port that may
authenticate itself when challenged by a remote system.
not-accessible
1.3.6.1.4.1.6141.2.60.401.1.2.2
wwpLeos8021xSuppEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
The MIB object is used as an index in the table and specifies the port.
current
read-only
Status
Access
The username that shall be used along with the password specified by
wwpLeos8021xSuppPassword to gain access to the PAE resources. Setting
this object to 0 resets the username.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.401.1.2.2.1
wwpLeos8021xSuppPort
1.3.6.1.4.1.6141.2.60.401.1.2.2.1.1
wwpLeos8021xSuppUserName
1.3.6.1.4.1.6141.2.60.401.1.2.2.1.2
wwpLeos8021xSuppPassword
Description and OID
current
The password that shall be used along with the username specified by
wwpLeos8021xSuppUserName to gain access on port. Setting this object to 0
resets the password.Doing a get on this object always returns NULL for
security reasons.
read-write
1.3.6.1.4.1.6141.2.60.401.1.2.2.1.3
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-8021X-MIB 22-3
wwpLeos8021xSuppPortStatsClear
Description and OID
Status
Access
Setting this MIB object to 'true' clears the supplicant port statistics.
current
read-write
Status
Access
current
read-write
Status
Access
Setting this MIB object to 'true' clears the authenticator global statistics.
current
read-write
Status
Access
Setting this MIB object to 'true' clears the supplicant global statistics.
current
read-write
1.3.6.1.4.1.6141.2.60.401.1.2.2.1.5
wwpLeos8021xSuppEAPMethod
1.3.6.1.4.1.6141.2.60.401.1.2.2.1.10
wwpLeos8021xAuthStatsClear
1.3.6.1.4.1.6141.2.60.401.1.2.3.1
wwpLeos8021xSuppStatsClear
1.3.6.1.4.1.6141.2.60.401.1.2.3.2
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
23-1
WWP-LEOS-BENCHMARK-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-BENCHMARK-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosBenchmarkRole
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.43.1.1.1
wwpLeosBenchmarkPort
1.3.6.1.4.1.6141.2.60.43.1.1.2
wwpLeosBenchmarkMode
1.3.6.1.4.1.6141.2.60.43.1.1.3
wwpLeosBenchmarkEnable
1.3.6.1.4.1.6141.2.60.43.1.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
23-2 WWP-LEOS-BENCHMARK-MIB
wwpLeosBenchmarkOperEnable
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Reflector enable/disable.
current
read-only
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.43.1.1.5
wwpLeosBenchmarkLocalFpgaMac
1.3.6.1.4.1.6141.2.60.43.1.1.6
wwpLeosBenchmarkReflectorEnable
1.3.6.1.4.1.6141.2.60.43.1.2.1
wwpLeosBenchmarkReflectorVid
Description and OID
1.3.6.1.4.1.6141.2.60.43.1.2.2
wwpLeosBenchmarkReflectorVendorType
Description and OID
Status
Access
current
read-only
Status
Access
Generator enable/disable.
current
read-only
1.3.6.1.4.1.6141.2.60.43.1.2.3
wwpLeosBenchmarkGeneratorEnable
1.3.6.1.4.1.6141.2.60.43.1.3.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-BENCHMARK-MIB 23-3
wwpLeosBenchmarkGeneratorprofileUnderTest
Description and OID
Status
Access
Profile currently under test or for which testing was last completed.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.43.1.3.2
wwpLeosBenchmarkGeneratorThroughputTestState
1.3.6.1.4.1.6141.2.60.43.1.3.3
wwpLeosBenchmarkGeneratorFramelossTestState
1.3.6.1.4.1.6141.2.60.43.1.3.4
wwpLeosBenchmarkGeneratorLatencyTestState
1.3.6.1.4.1.6141.2.60.43.1.3.5
wwpLeosBenchmarkGeneratorPdvTestState
1.3.6.1.4.1.6141.2.60.43.1.3.6
wwpLeosBenchmarkGeneratorRfc2544State
1.3.6.1.4.1.6141.2.60.43.1.3.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
23-4 WWP-LEOS-BENCHMARK-MIB
wwpLeosBenchmarkGeneratorCurrentPktSize
Description and OID
Status
Access
current
read-only
Status
Access
Traffic rate currently used to generate packets as percent of the line rate
current
read-only
Status
Access
When latency and/or pdv is running, this indicates how many samples have
been gathered so far.
current
read-only
Status
Access
Indicates which iteration of the test suite is currently running for the profile
under test.
current
read-only
Status
Access
current
Indicates the total number of iterations that will be run in accordance to the
interval and duration settings of the profile under test. A value of -1 indicates
indefinite number of iterations; test traffic stops when the user manually stops
the profile under test.
read-only
1.3.6.1.4.1.6141.2.60.43.1.3.8
wwpLeosBenchmarkGeneratorCurrentRate
1.3.6.1.4.1.6141.2.60.43.1.3.9
wwpLeosBenchmarkGeneratorSamplesCompleted
1.3.6.1.4.1.6141.2.60.43.1.3.10
wwpLeosBenchmarkGeneratorCurrentIteration
1.3.6.1.4.1.6141.2.60.43.1.3.11
wwpLeosBenchmarkGeneratorTotalIterations
Description and OID
1.3.6.1.4.1.6141.2.60.43.1.3.12
wwpLeosBenchmarkFpgaStatsRxPkts
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.43.1.4.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-BENCHMARK-MIB 23-5
wwpLeosBenchmarkFpgaStatsCrcPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
BENCHMARK FPGA stats packets received which don't match any active/
enabled profile(s).
current
read-only
Status
Access
current
read-only
Status
Access
deprecated
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.43.1.4.2
wwpLeosBenchmarkFpgaStatsUdpChecksumPkts
1.3.6.1.4.1.6141.2.60.43.1.4.3
wwpLeosBenchmarkFpgaStatsDiscardPkts
1.3.6.1.4.1.6141.2.60.43.1.4.4
wwpLeosBenchmarkFpgaStatsDuplicatePkts
1.3.6.1.4.1.6141.2.60.43.1.4.5
wwpLeosBenchmarkFpgaStatsOOSeqPkts
1.3.6.1.4.1.6141.2.60.43.1.4.6
wwpLeosBenchmarkFpgaStatsTxPkts
1.3.6.1.4.1.6141.2.60.43.1.4.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
23-6 WWP-LEOS-BENCHMARK-MIB
wwpLeosBenchmarkFpgaStatsOOOPkts
Description and OID
Status
Access
deprecated
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.43.1.4.8
wwpLeosBenchmarkFpgaStatsDiscSeqNumPkts
1.3.6.1.4.1.6141.2.60.43.1.4.9
wwpLeosBenchmarkFpgaStatsRxIpPkts
1.3.6.1.4.1.6141.2.60.43.1.4.10
wwpLeosBenchmarkFpgaStatsRxUdpPkts
1.3.6.1.4.1.6141.2.60.43.1.4.11
wwpLeosBenchmarkFpgaStatsRxNonIpPkts
1.3.6.1.4.1.6141.2.60.43.1.4.12
wwpLeosBenchmarkFpgaStatsRxUnrecognizedPkts
1.3.6.1.4.1.6141.2.60.43.1.4.13
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-BENCHMARK-MIB 23-7
wwpLeosBenchmarkPortStatsTxBytes
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.43.1.5.1
wwpLeosBenchmarkPortStatsTxPkts
1.3.6.1.4.1.6141.2.60.43.1.5.2
wwpLeosBenchmarkPortStatsCrcErrorPkts
1.3.6.1.4.1.6141.2.60.43.1.5.3
wwpLeosBenchmarkPortStatsUcastPkts
1.3.6.1.4.1.6141.2.60.43.1.5.4
wwpLeosBenchmarkPortStatsMcastPkts
1.3.6.1.4.1.6141.2.60.43.1.5.5
wwpLeosBenchmarkPortStatsBcastPkts
1.3.6.1.4.1.6141.2.60.43.1.5.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
23-8 WWP-LEOS-BENCHMARK-MIB
wwpLeosBenchmarkPortStatsUndersizePkts
Description and OID
Status
Access
The total number of packets received that were less than 64 octets long
(excluding framing bits, but including FCS octets) and were otherwise well
formed.
current
read-only
Status
Access
The total number of packets received that were longer than 1518 octets
(excluding framing bits, but including FCS octets) and were otherwise well
formed.
current
read-only
Status
Access
The total number of packets received that were less than 64 octets in length current
(excluding framing bits but including FCS octets) and had either a bad Frame
Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad
FCS with a non-integral number of octets (Alignment Error).
read-only
1.3.6.1.4.1.6141.2.60.43.1.5.7
wwpLeosBenchmarkPortStatsOversizePkts
1.3.6.1.4.1.6141.2.60.43.1.5.8
wwpLeosBenchmarkPortStatsFragmentsPkts
Description and OID
1.3.6.1.4.1.6141.2.60.43.1.5.9
wwpLeosBenchmarkPortStatsJabbersPkts
Description and OID
Status
Access
current
The total number of packets received that were longer than 1518 octets
(excluding framing bits, but including FCS octets), and had either a bad Frame
Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad
FCS with a non-integral number of octets (Alignment Error).
read-only
1.3.6.1.4.1.6141.2.60.43.1.5.10
wwpLeosBenchmarkPortStatsTxPausePkts
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.43.1.5.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-BENCHMARK-MIB 23-9
wwpLeosBenchmarkPortStatsTxDropPkts
Description and OID
Status
Access
The total number of dropped packets on the benchmark port when traffic
profiles are enabled (311v only).
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.43.1.5.12
wwpLeosBenchmarkPortStatsTxDiscardPkts
1.3.6.1.4.1.6141.2.60.43.1.5.13
wwpLeosBenchmarkPortStatsTxLOutRangePkts
1.3.6.1.4.1.6141.2.60.43.1.5.14
wwpLeosBenchmarkPortStatsTx64OctsPkts
1.3.6.1.4.1.6141.2.60.43.1.5.15
wwpLeosBenchmarkPortStatsTx65To127Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.16
wwpLeosBenchmarkPortStatsTx128To255Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.17
MIB Reference
009-3220-011 Standard Revision A
August 2013
23-10 WWP-LEOS-BENCHMARK-MIB
wwpLeosBenchmarkPortStatsTx256To511Pkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.43.1.5.18
wwpLeosBenchmarkPortStatsTx512To1023Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.19
wwpLeosBenchmarkPortStatsTx1024To1518Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.20
wwpLeosBenchmarkPortStatsTx1519To2047Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.21
wwpLeosBenchmarkPortStatsTx2048To4095Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.22
wwpLeosBenchmarkPortStatsTx4096To9216Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.23
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-BENCHMARK-MIB 23-11
wwpLeosBenchmarkPortStatsRxBytes
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.43.1.5.24
wwpLeosBenchmarkPortStatsRxPkts
1.3.6.1.4.1.6141.2.60.43.1.5.25
wwpLeosBenchmarkPortStatsRxExDeferPkts
1.3.6.1.4.1.6141.2.60.43.1.5.26
wwpLeosBenchmarkPortStatsRxDeferPkts
1.3.6.1.4.1.6141.2.60.43.1.5.27
wwpLeosBenchmarkPortStatsRxGiantPkts
1.3.6.1.4.1.6141.2.60.43.1.5.28
wwpLeosBenchmarkPortStatsRxUnderRunPkts
1.3.6.1.4.1.6141.2.60.43.1.5.29
MIB Reference
009-3220-011 Standard Revision A
August 2013
23-12 WWP-LEOS-BENCHMARK-MIB
wwpLeosBenchmarkPortStatsRxCrcErrorPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The number of frames received by the benchmark port that exceeded the
maximum permitted frame size.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.43.1.5.30
wwpLeosBenchmarkPortStatsRxLCheckErrorPkts
1.3.6.1.4.1.6141.2.60.43.1.5.31
wwpLeosBenchmarkPortStatsRxLOutRangePkts
1.3.6.1.4.1.6141.2.60.43.1.5.32
wwpLeosBenchmarkPortStatsRxPausePkts
1.3.6.1.4.1.6141.2.60.43.1.5.33
wwpLeosBenchmarkPortStatsRxUcastPkts
1.3.6.1.4.1.6141.2.60.43.1.5.34
wwpLeosBenchmarkPortStatsRxMcastPkts
1.3.6.1.4.1.6141.2.60.43.1.5.35
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-BENCHMARK-MIB 23-13
wwpLeosBenchmarkPortStatsRxBcastPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.43.1.5.36
wwpLeosBenchmarkPortStatsRx64Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.37
wwpLeosBenchmarkPortStatsRx65To127Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.38
wwpLeosBenchmarkPortStatsRx128To255Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.39
wwpLeosBenchmarkPortStatsRx256To511Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.40
wwpLeosBenchmarkPortStatsRx512To1023Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.41
MIB Reference
009-3220-011 Standard Revision A
August 2013
23-14 WWP-LEOS-BENCHMARK-MIB
wwpLeosBenchmarkPortStatsRx1024To1518Pkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.43.1.5.42
wwpLeosBenchmarkPortStatsRx1519To2047Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.43
wwpLeosBenchmarkPortStatsRx2048To4095Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.44
wwpLeosBenchmarkPortStatsRx4096To9216Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.45
wwpLeosBenchmarkProfileTable
1.3.6.1.4.1.6141.2.60.43.1.6.1
wwpLeosBenchmarkProfileEntry
1.3.6.1.4.1.6141.2.60.43.1.6.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-BENCHMARK-MIB 23-15
wwpLeosBenchmarkProfileEntryId
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
Profile enable/disable
current
read-only
Status
Access
Profile start/stop
current
read-only
Status
Access
Interval between the start of one test group to the start of the next test group. current
read-only
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.1
wwpLeosBenchmarkProfileEntryName
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.2
wwpLeosBenchmarkProfileEntryEnabled
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.3
wwpLeosBenchmarkProfileEntryStarted
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.4
wwpLeosBenchmarkProfileEntryInterval
Description and OID
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.5
wwpLeosBenchmarkProfileEntryDuration
Description and OID
Status
Access
Duration of the testing. The test group is repeated until the duration ends.
When indefinite is set, test group is run only once to completion
current
read-only
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
23-16 WWP-LEOS-BENCHMARK-MIB
wwpLeosBenchmarkProfileEntryThroughputTest
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Run RFC2544 test suite which includes throughput, frame loss and latency
tests
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.7
wwpLeosBenchmarkProfileEntryFramelossTest
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.8
wwpLeosBenchmarkProfileEntryLatencyTest
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.9
wwpLeosBenchmarkProfileEntryPdvTest
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.10
wwpLeosBenchmarkProfileEntryRfc2544Suite
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.11
wwpLeosBenchmarkProfileEntryDstmac
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-BENCHMARK-MIB 23-17
wwpLeosBenchmarkProfileEntryEncapType
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Vlan priority code point value to use for the generated packets.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.13
wwpLeosBenchmarkProfileEntryVid
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.14
wwpLeosBenchmarkProfileEntryPcp
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.15
wwpLeosBenchmarkProfileEntryCfi
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.16
wwpLeosBenchmarkProfileEntryTpid
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.17
wwpLeosBenchmarkProfileEntryPduType
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.18
MIB Reference
009-3220-011 Standard Revision A
August 2013
23-18 WWP-LEOS-BENCHMARK-MIB
wwpLeosBenchmarkProfileEntrySrcIpAddr
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Maximum bandwidth to use when generating test traffic for the profile.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.19
wwpLeosBenchmarkProfileEntryDstIpAddr
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.20
wwpLeosBenchmarkProfileEntryDscp
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.21
wwpLeosBenchmarkProfileEntryCustomPayload
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.22
wwpLeosBenchmarkProfileEntryBandwidth
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.23
wwpLeosBenchmarkProfileEntryVidValidation
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.24
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-BENCHMARK-MIB 23-19
wwpLeosBenchmarkProfileEntryMaxSearches
Description and OID
Status
Access
For the throughput test, this is the maximum number of searches to find a
transmit rate without drops for a given frame size.
current
read-only
Status
Access
For the latency and PDV tests, this is the number of samples to take in order current
to determine the min, avg and max latency and avg PDV.
read-only
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.25
wwpLeosBenchmarkProfileEntryMaxSamples
Description and OID
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.26
wwpLeosBenchmarkProfileEntrySamplingInterval
Description and OID
Status
Access
For the latency and PDV tests, this is the interval, in 100ms, to wait between
samples.
current
read-only
Status
Access
For the frame loss test, this indicates which bandwidth value to use as the
starting bandwidth; the maximum bandwidth determined via the throughput
test, the bandwidth parameter configured in the profile, or the maximum
bandwidth of the link.
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.27
wwpLeosBenchmarkProfileEntryFrameLossStartBw
1.3.6.1.4.1.6141.2.60.43.1.6.1.1.28
wwpLeosBenchmarkProfileThroughputStatisticsTable
1.3.6.1.4.1.6141.2.60.43.1.6.2
wwpLeosBenchmarkProfileThroughputStatsEntry
1.3.6.1.4.1.6141.2.60.43.1.6.2.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
23-20 WWP-LEOS-BENCHMARK-MIB
wwpLeosBenchmarkProfileThroughputStatsProfileId
Description and OID
Status
Access
current
not-accessible
Status
Access
Frame size index for which those throughput statistics are associated.
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.43.1.6.2.1.1
wwpLeosBenchmarkProfileThroughputStatsFrameSizeIndex
1.3.6.1.4.1.6141.2.60.43.1.6.2.1.2
wwpLeosBenchmarkProfileThroughputStatsFrameSize
1.3.6.1.4.1.6141.2.60.43.1.6.2.1.3
wwpLeosBenchmarkProfileThroughputStatsMin
1.3.6.1.4.1.6141.2.60.43.1.6.2.1.4
wwpLeosBenchmarkProfileThroughputStatsMax
1.3.6.1.4.1.6141.2.60.43.1.6.2.1.5
wwpLeosBenchmarkProfileThroughputStatsAvg
1.3.6.1.4.1.6141.2.60.43.1.6.2.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-BENCHMARK-MIB 23-21
wwpLeosBenchmarkProfileThroughputStatsIterations
Description and OID
Status
Access
Number of times the test has been run for this packet size.
current
read-only
Status
Access
Active VLAN Id. Either the value configured in the profile or the one specified current
with the start command.
read-only
1.3.6.1.4.1.6141.2.60.43.1.6.2.1.7
wwpLeosBenchmarkProfileThroughputStatsActiveVid
Description and OID
1.3.6.1.4.1.6141.2.60.43.1.6.2.1.8
wwpLeosBenchmarkProfileThroughputStatsActiveDstMac
Description and OID
Status
Access
Active destination MAC address. Either the value configured in the profile or
the value specified with the start command.
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
Profile Id.
current
not-accessible
1.3.6.1.4.1.6141.2.60.43.1.6.2.1.9
wwpLeosBenchmarkProfileFramelossStatisticsTable
1.3.6.1.4.1.6141.2.60.43.1.6.3
wwpLeosBenchmarkProfileFramelossStatsEntry
1.3.6.1.4.1.6141.2.60.43.1.6.3.1
wwpLeosBenchmarkProfileFramelossStatsProfileId
1.3.6.1.4.1.6141.2.60.43.1.6.3.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
23-22 WWP-LEOS-BENCHMARK-MIB
wwpLeosBenchmarkProfileFramelossStatsFrameSizeIndex
Description and OID
Status
Access
current
not-accessible
Status
Access
Rate index.
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.43.1.6.3.1.2
wwpLeosBenchmarkProfileFramelossStatsRateIndex
1.3.6.1.4.1.6141.2.60.43.1.6.3.1.3
wwpLeosBenchmarkProfileFramelossStatsFrameSize
1.3.6.1.4.1.6141.2.60.43.1.6.3.1.4
wwpLeosBenchmarkProfileFramelossStatsRate
1.3.6.1.4.1.6141.2.60.43.1.6.3.1.5
wwpLeosBenchmarkProfileFramelossStatsFirst
1.3.6.1.4.1.6141.2.60.43.1.6.3.1.6
wwpLeosBenchmarkProfileFramelossStatsSecond
1.3.6.1.4.1.6141.2.60.43.1.6.3.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-BENCHMARK-MIB 23-23
wwpLeosBenchmarkProfileFramelossStatsActiveVid
Description and OID
Status
Access
Active VLAN Id. Either the value configured in the profile or the one specified current
with the start command.
read-only
1.3.6.1.4.1.6141.2.60.43.1.6.3.1.8
wwpLeosBenchmarkProfileFramelossStatsActiveDstMac
Description and OID
Status
Access
Active destination MAC address. Either the value configured in the profile or
the value specified with the start command.
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.43.1.6.3.1.9
wwpLeosBenchmarkProfileLatencyStatisticsTable
1.3.6.1.4.1.6141.2.60.43.1.6.4
wwpLeosBenchmarkProfileLatencyStatsEntry
1.3.6.1.4.1.6141.2.60.43.1.6.4.1
wwpLeosBenchmarkProfileLatencyStatsProfileId
1.3.6.1.4.1.6141.2.60.43.1.6.4.1.1
wwpLeosBenchmarkProfileLatencyStatsFrameSizeIndex
1.3.6.1.4.1.6141.2.60.43.1.6.4.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
23-24 WWP-LEOS-BENCHMARK-MIB
wwpLeosBenchmarkProfileLatencyStatsFrameSize
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Active VLAN Id. Either the value configured in the profile or the one specified current
with the start command.
read-only
1.3.6.1.4.1.6141.2.60.43.1.6.4.1.3
wwpLeosBenchmarkProfileLatencyStatsMin
1.3.6.1.4.1.6141.2.60.43.1.6.4.1.4
wwpLeosBenchmarkProfileLatencyStatsMax
1.3.6.1.4.1.6141.2.60.43.1.6.4.1.5
wwpLeosBenchmarkProfileLatencyStatsAvg
1.3.6.1.4.1.6141.2.60.43.1.6.4.1.6
wwpLeosBenchmarkProfileLatencyStatsSamples
1.3.6.1.4.1.6141.2.60.43.1.6.4.1.7
wwpLeosBenchmarkProfileLatencyStatsActiveVid
Description and OID
1.3.6.1.4.1.6141.2.60.43.1.6.4.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-BENCHMARK-MIB 23-25
wwpLeosBenchmarkProfileLatencyStatsActiveDstMac
Description and OID
Status
Access
Active destination MAC address. Either the value configured in the profile or
the value specified with the start command.
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.43.1.6.4.1.9
wwpLeosBenchmarkProfilePdvStatisticsTable
1.3.6.1.4.1.6141.2.60.43.1.6.5
wwpLeosBenchmarkProfilePdvStatsEntry
1.3.6.1.4.1.6141.2.60.43.1.6.5.1
wwpLeosBenchmarkProfilePdvStatsProfileId
1.3.6.1.4.1.6141.2.60.43.1.6.5.1.1
wwpLeosBenchmarkProfilePdvStatsFrameSizeIndex
1.3.6.1.4.1.6141.2.60.43.1.6.5.1.2
wwpLeosBenchmarkProfilePdvStatsFrameSize
1.3.6.1.4.1.6141.2.60.43.1.6.5.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
23-26 WWP-LEOS-BENCHMARK-MIB
wwpLeosBenchmarkProfilePdvStatsAvg
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Active VLAN Id. Either the value configured in the profile or the one specified current
with the start command.
read-only
1.3.6.1.4.1.6141.2.60.43.1.6.5.1.4
wwpLeosBenchmarkProfilePdvStatsSamples
1.3.6.1.4.1.6141.2.60.43.1.6.5.1.5
wwpLeosBenchmarkProfilePdvStatsActiveVid
Description and OID
1.3.6.1.4.1.6141.2.60.43.1.6.5.1.6
wwpLeosBenchmarkProfilePdvStatsActiveDstMac
Description and OID
Status
Access
Active destination MAC address. Either the value configured in the profile or
the value specified with the start command.
current
read-only
Status
Access
Table providing the list of frame sizes used for testing the profiles.
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.43.1.6.5.1.7
wwpLeosBenchmarkProfileFrameSizeTable
1.3.6.1.4.1.6141.2.60.43.1.6.6
wwpLeosBenchmarkProfileFrameSizeEntry
1.3.6.1.4.1.6141.2.60.43.1.6.6.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-BENCHMARK-MIB 23-27
wwpLeosBenchmarkProfileFrameSizeProfileId
Description and OID
Status
Access
current
not-accessible
Status
Access
Frame size index into the targeted profile's frame size list.
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.43.1.6.6.1.1
wwpLeosBenchmarkProfileFrameSizeIndex
1.3.6.1.4.1.6141.2.60.43.1.6.6.1.2
wwpLeosBenchmarkProfileFrameSize
1.3.6.1.4.1.6141.2.60.43.1.6.6.1.3
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
24-1
WWP-LEOS-BLADE-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-BLADE-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosBladeTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
The object indicates whether this is a control blade, a line blade or an uplink
blade.
current
read-only
1.3.6.1.4.1.6141.2.60.1.1.1.1
wwpLeosBladeEntry
1.3.6.1.4.1.6141.2.60.1.1.1.1.1
wwpLeosBladeId
1.3.6.1.4.1.6141.2.60.1.1.1.1.1.1
wwpLeosBladeType
1.3.6.1.4.1.6141.2.60.1.1.1.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
24-2 WWP-LEOS-BLADE-MIB
wwpLeosBladeCapFilename
Description and OID
Status
current
The capability file name (including the path, if applicable) to be read from.
This is the file describing capabilities of the blade and is required to configure
an unequipped blade or to add a new blade. Length of filename string must
not exceed 255 alpha-numeric characters, no spaces in filenames.
Access
read-write
1.3.6.1.4.1.6141.2.60.1.1.1.1.1.3
wwpLeosBladeAdminState
Description and OID
Status
The object indicates the desired state of the blade. The administrative state for current
control blades can be set to disabled only if the control blade has a functioning
backup.
Access
read-write
1.3.6.1.4.1.6141.2.60.1.1.1.1.1.4
wwpLeosBladeOperState
Description and OID
Status
Access
The object indicates the operational state of the blade. If the blade is detected current
and the administrative state for that blade is enabled, then the operational
state of the blade is 'enabled'. If the blade is detected, but the administrative
state is 'disabled', then the operational state is also 'disabled'. A faulted state
occurs when a fault or communication failure is detected on a blade that is in
either the 'enabled' or 'disabled' operation state.
Any time a blade is
removed, the blade state transitions to 'unequipped'. If a new blade replaces
that blade state then the state is determined by its administrative state once it
is detected ('enabled' or 'disabled').
read-only
1.3.6.1.4.1.6141.2.60.1.1.1.1.1.5
wwpLeosBladeStartMacAddr
Description and OID
Status
Access
Base MAC address for the Blade, from which the MAC addresses for the ports current
on this blade are derived.
read-only
1.3.6.1.4.1.6141.2.60.1.1.1.1.1.6
wwpLeosBladeNumPorts
Description and OID
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.1.1.1.1.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-BLADE-MIB 24-3
wwpLeosBladeStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, a manager must
set this object to
'createAndGo'. Object in the entry cannot be modified once the
wwpLeosBladeStatus is set to 'active'.
Access
read-create
1.3.6.1.4.1.6141.2.60.1.1.1.1.1.8
wwpLeosPhyBladeTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
The time (in hundredths of a second) since the blade was last re-initialized.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.1.1.1.2
wwpLeosPhyBladeEntry
1.3.6.1.4.1.6141.2.60.1.1.1.2.1
wwpLeosPhyBladeSysUpTime
1.3.6.1.4.1.6141.2.60.1.1.1.2.1.1
wwpLeosPhyBladeSerialNum
1.3.6.1.4.1.6141.2.60.1.1.1.2.1.2
wwpLeosPhyBladeBoardRevision
1.3.6.1.4.1.6141.2.60.1.1.1.2.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
24-4 WWP-LEOS-BLADE-MIB
wwpLeosPhyBladePostResults
Description and OID
Status
Access
The test result string generated by the POST tests for the blade.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
This object defines the number of times that the blade has been restarted.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.1.1.1.2.1.4
wwpLeosPhyBladePostCode
1.3.6.1.4.1.6141.2.60.1.1.1.2.1.5
wwpLeosPhyBladeMfgDate
1.3.6.1.4.1.6141.2.60.1.1.1.2.1.6
wwpLeosPhyBladeBoardDesc
1.3.6.1.4.1.6141.2.60.1.1.1.2.1.7
wwpLeosPhyBladeNumResets
1.3.6.1.4.1.6141.2.60.1.1.1.2.1.8
wwpLeosPhyBladeLastRebootReason
1.3.6.1.4.1.6141.2.60.1.1.1.2.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-BLADE-MIB 24-5
wwpLeosPhyBladeRebootOperation
Description and OID
Status
current
Writing one of the specified values to this field causes the specified type of
reboot to occur. The value 'none' is returned when this leaf is queried. Writing
this value to the leaf has no effect. The 'reboot' option causes the system to
reboot and restart using its current configuration. The 'rebootReinit' option
causes the module to erase all user configuration data and reset to factory
default settings. The'rebootCustReinit' option causes the module to replace
the current configuration with a customer supplied default, then reboot.
Access
read-write
1.3.6.1.4.1.6141.2.60.1.1.1.2.1.10
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
wwpLeosBladeStateChange
A wwpLeosPhyBladeUpDown notification is sent whenever the operational
state of the blade is changed. Variable bindings include: wwpLeosBladeId and
wwpLeosBladeOperState.
Object Identifier: 1.3.6.1.4.1.6141.2.60.1.2.0.1
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150
wwpLeosBladePostFail
A wwpLeosBladePostFail notification is sent if the blade post tests are failed.
Variable bindings include: wwpLeosBladeId and
wwpLeosPhyBladePostCode.
Object Identifier: 1.3.6.1.4.1.6141.2.60.1.2.0.2
Status: current
Supported Platforms: none
MIB Reference
009-3220-011 Standard Revision A
August 2013
25-1
WWP-LEOS-BROADCASTCONTAINMENT-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-BROADCAST-CONTAINMENT-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosBroadcastContainmentCapability
Description and OID
Status
Access
current
It shows which of the following (wwpLeosBroadcastContainmentPortId or
wwpLeosBroadcastContainmentVlanId or both) can be used as an index in
wwpLeosBroadcastContainmentFilterMemTable. If bit 0 of the bit mask
(starting from right to left) is set to 1 then
wwpLeosBroadcastContainmentVlanId can be used as index. If bit 1 of the bit
mask is set to 1 then wwpLeosBroadcastContainmentPortId can be used as
index. If both bits are set to 1 then both can be used as index.
read-only
1.3.6.1.4.1.6141.2.60.8.1.1
wwpLeosBroadcastContainmentPktDroppedStats
Description and OID
Status
Access
Displays the global dropped packets statistics for all VLANs and ports.
current
read-only
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.8.1.2
wwpLeosBroadcastContainmentFilterTable
1.3.6.1.4.1.6141.2.60.8.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
25-2 WWP-LEOS-BROADCAST-CONTAINMENT-MIB
wwpLeosBroadcastContainmentFilterEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.8.1.4.1
wwpLeosBroadcastContainmentIndex
1.3.6.1.4.1.6141.2.60.8.1.4.1.1
wwpLeosBroadcastContainmentFilterName
Description and OID
read-create
1.3.6.1.4.1.6141.2.60.8.1.4.1.2
wwpLeosBroadcastContainmentPktLimit
Description and OID
Status
Access
current
read-create
Status
Access
This object if True, specifies that packets were dropped for the given filter since current
it was last read. If this object is false then no packet was dropped since it was
last read.
read-only
1.3.6.1.4.1.6141.2.60.8.1.4.1.3
wwpLeosBroadcastContainmentPktDropState
Description and OID
1.3.6.1.4.1.6141.2.60.8.1.4.1.4
wwpLeosBroadcastContainmentStatus
Description and OID
Status
To create a row in this table, a manager must set this object to 'createAndGo'. current
To delete the entry set to 'destroy'. To update this entry this object may not be
set.
Access
read-create
1.3.6.1.4.1.6141.2.60.8.1.4.1.5
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-BROADCAST-CONTAINMENT-MIB 25-3
wwpLeosBroadcastContainmentKbps
Description and OID
Status
Access
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.8.1.4.1.6
wwpLeosBroadcastContainmentClassifier
Description and OID
The classifier type for the filter. The value of this object can be any combination current
of the following: ClassifierType_Unknown(0) ClassifierType_Broadcast(1)
ClassifierType_UnknownL2Multicast(2) ClassifierType_UnknownUnicast(4)
ClassifierType_UnknownIpMulticast(8) ClassifierType_AllMultcast(16) For
example, if the user wants to set the classifier type for the filter as
broadcast+unknown_unicast, the value of the object should be set as 5 (1 +
4). Similary if the preferred classifier type is All_flooding, the value would be 15
(1+2+4+8). By default, the classifier type is 3 (broadcast +
unknownL2Multicast). When resource mode is disabled, the only supported
multicast option is ClassifierType_AllMulticast. The L2 and IP multicast options
are controlled individually if resource mode is enabled.
read-create
1.3.6.1.4.1.6141.2.60.8.1.4.1.7
wwpLeosBroadcastContainmentFilterMemTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.8.1.5
wwpLeosBroadcastContainmentFilterMemEntry
1.3.6.1.4.1.6141.2.60.8.1.5.1
wwpLeosBroadcastContainmentVlanId
Description and OID
Unique index into the table. Depending on the capability of the device, set this current
index to valid VLAN id or 0 for all vlans.
not-accessible
1.3.6.1.4.1.6141.2.60.8.1.5.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
25-4 WWP-LEOS-BROADCAST-CONTAINMENT-MIB
wwpLeosBroadcastContainmentPortId
Description and OID
Status
Unique index into the table. Depending on the capability of the device, set this current
index to valid port id or 0 for all ports.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.8.1.5.1.2
wwpLeosBroadcastContainmentFilterMemStatus
Description and OID
Status
To create a row in this table, a manager must set this object to 'createAndGo'. current
To delete the entry set to 'destroy'. To update this entry this object may not be
set.
Access
read-create
1.3.6.1.4.1.6141.2.60.8.1.5.1.3
wwpLeosBroadcastContainmentGlobalStatus
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.8.1.6
wwpLeosBroadcastContainmentGlobalTime
1.3.6.1.4.1.6141.2.60.8.1.7
wwpLeosBroadcastContainmentIgnoreRapsMessages
Description and OID
When this object is enabled, all configured broadcast containment filters will current
ignore R-APS messages when filtering PDUs. The default setting is disabled.
read-write
1.3.6.1.4.1.6141.2.60.8.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-BROADCAST-CONTAINMENT-MIB 25-5
wwpLeosBroadcastContainmentResourceMode
Description and OID
Status
Access
current
read-write
Status
Access
Displays the global dropped bytes statistics for all VLANs and ports. Not
supported by SAOS 4.x or earlier releases.
current
read-only
1.3.6.1.4.1.6141.2.60.8.1.9
wwpLeosBroadcastContainmentBytesDroppedStats
1.3.6.1.4.1.6141.2.60.8.1.10
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
wwpLeosBcastThresholdExceed
A wwpLeosBcastThresholdExceed notification is sent when for given filter
index, the number of broadcast packet received becomes greater than or
equal to the configured packet limit, and the value of broadcast packet
received at the last sampling interval was less than the configured packet limit.
Object Identifier: 1.3.6.1.4.1.6141.2.60.8.2.1.1
Status: current
Supported Platforms:
wwpLeosBcastThresholdNormal
A wwpLeosBcastThresholdNormal notification is sent when for given filter
index, the total number of broadcast packet received becomes less than the
configured packet limit, and the value of broadcast packet received at the last
sampling interval was greater than or equal to the configured packet limit.
Object Identifier: 1.3.6.1.4.1.6141.2.60.8.2.1.2
Status: current
Supported Platforms:
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-1
WWP-LEOS-CFM-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-CFM-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosCfmState
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.1.1
wwpLeosCfmEtherType
1.3.6.1.4.1.6141.2.60.35.1.1.2
wwpLeosCfmMEPHoldTime
Description and OID
This object specifies the time in milliseconds to hold a MEP in an inactive state. current
read-write
1.3.6.1.4.1.6141.2.60.35.1.1.3
wwpLeosCfmCcmAvailable
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-2 WWP-LEOS-CFM-MIB
wwpLeosCfmY1731EtherType
Description and OID
Status
Access
This object specifies the Optional Alternate Ethernet type for Y.1731 frames.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.1.5
wwpLeosCfmL2LoopDetectState
Description and OID
This object allows the user to globally configure CFM's Layer 2 Loop detection current
state. Frames received by the switch that have a source MAC of the switch
are discarded.
read-write
1.3.6.1.4.1.6141.2.60.35.1.1.6
wwpLeosCfmDot1adStrict
Description and OID
Status
current
Controls compliance of processing 802.1ad encapsulated CFM frames in
accordance with the 8021.ag standard. When on (1) CFM frames containing
more than one VLAN tag are forwarded as normal data frames, bypassing
processing by MEPs and MIPs. When off (2) CFM frames with multiple VLAN
tags are subject to normal CFM processing.
Access
read-write
1.3.6.1.4.1.6141.2.60.35.1.1.7
wwpLeosCfmMipLevelEnforcement
Description and OID
Status
Controls enforcement of a MIPs associated MD Level. When on (1), a MIP only current
processes CFM messages received at its level. When off (2), a MIP processes
frames received at any level.
Access
read-write
1.3.6.1.4.1.6141.2.60.35.1.1.8
wwpLeosCfmMipCcmDbState
Description and OID
Status
Access
The administrative state of the MIP CCM Database. A MIP only records
CCMs in the MIP CCM Database when this object is set to enable (1).
current
read-write
1.3.6.1.4.1.6141.2.60.35.1.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-3
wwpLeosCfmLBMDefaultCount
Description and OID
Status
Access
deprecated
read-write
Status
Access
deprecated
read-write
Status
Access
deprecated
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.1.10
wwpLeosCfmLBMDefaultInterval
1.3.6.1.4.1.6141.2.60.35.1.1.11
wwpLeosCfmLBMDefaultTimeout
1.3.6.1.4.1.6141.2.60.35.1.1.12
wwpLeosCfmFrameClassifierMode
Description and OID
Configures the hardware frame classification mode used to detect CFM and deprecated
Y.1731 frames that should be sent to the CPU for processing. Changing this
mode causes a reboot of the device.
read-write
1.3.6.1.4.1.6141.2.60.35.1.1.13
wwpLeosCfmGlobalLBMDefaultCount
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.35.1.1.16
wwpLeosCfmGlobalLBMDefaultInterval
1.3.6.1.4.1.6141.2.60.35.1.1.17
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-4 WWP-LEOS-CFM-MIB
wwpLeosCfmGlobalLBMDefaultTimeout
Description and OID
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.1.18
wwpLeosCfmGlobalFrameClassifierMode
Description and OID
Configures the hardware frame classification mode used to detect CFM and current
Y.1731 frames that should be sent to the CPU for processing. Changing this
mode causes a reboot of the device.
read-write
1.3.6.1.4.1.6141.2.60.35.1.1.19
wwpLeosCfmGlobalSLMDefaultCount
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.1.20
wwpLeosCfmGlobalSLMDefaultInterval
1.3.6.1.4.1.6141.2.60.35.1.1.21
wwpLeosCfmGlobalSLMDefaultTimeout
1.3.6.1.4.1.6141.2.60.35.1.1.22
wwpLeosCfmGlobalControlModuleFrameBudget
1.3.6.1.4.1.6141.2.60.35.1.1.24.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-5
wwpLeosCfmGlobalFrameBudgetTable
Description and OID
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.1.24.2
wwpLeosCfmGlobalFrameBudgetEntry
Description and OID
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.1.24.2.1
wwpLeosCfmGlobalFrameBudgetSlotIndex
Description and OID
Status
Access
Slot Index
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.1.24.2.1.1
wwpLeosCfmGlobalFrameBudgetValue
1.3.6.1.4.1.6141.2.60.35.1.1.24.2.1.2
wwpLeosCfmStatsTotalTx
1.3.6.1.4.1.6141.2.60.35.1.1.25.1
wwpLeosCfmStatsTotalRx
1.3.6.1.4.1.6141.2.60.35.1.1.25.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-6 WWP-LEOS-CFM-MIB
wwpLeosCfmStatsTxFloodedFrames
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.1.25.3
wwpLeosCfmStatsTxFloodedIgnoredStpState
1.3.6.1.4.1.6141.2.60.35.1.1.25.4
wwpLeosCfmStatsRxTotalValidFrames
1.3.6.1.4.1.6141.2.60.35.1.1.25.5
wwpLeosCfmStatsRxTotalNotValidatedFrames
1.3.6.1.4.1.6141.2.60.35.1.1.25.6
wwpLeosCfmStatsRxTotalInValidFrames
1.3.6.1.4.1.6141.2.60.35.1.1.25.7
wwpLeosCfmTotalRxInvalidMessageOverflow
1.3.6.1.4.1.6141.2.60.35.1.1.25.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-7
wwpLeosCfmTotalRxInvalidPortStatusTLV
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
deprecated
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.1.25.9
wwpLeosCfmTotalRxInvalidInterfaceStatusTLV
1.3.6.1.4.1.6141.2.60.35.1.1.25.10
wwpLeosCfmTotalRxInvalidSenderIDTLV
1.3.6.1.4.1.6141.2.60.35.1.1.25.11
wwpLeosCfmRxAdminDisableDropped
1.3.6.1.4.1.6141.2.60.35.1.1.25.12
wwpLesoCfmRxInvalidEtypeDropped
1.3.6.1.4.1.6141.2.60.35.1.1.25.13
wwpLeosCfmRxInvalidOpCodeDropped
1.3.6.1.4.1.6141.2.60.35.1.1.25.14
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-8 WWP-LEOS-CFM-MIB
wwpLeosCfmRxSTPStateNotForwardingDropped
Description and OID
Status
Access
The number of frames dropped when system is not in STP forwarding mode. current
read-only
1.3.6.1.4.1.6141.2.60.35.1.1.25.15
wwpLeosCfmGlobalStatsClear
Description and OID
Status
Access
Setting this object to clear(1) clears statistics globally (global, service and
MEP statistics). This object cannot be set to none.
current
read-write
Status
Access
Setting this object to clear(1) clears the loopback statistics globally (global,
service and MEP statistics).
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.1.25.16
wwpLeosCfmGlobalLoopbackMsgStatsClear
1.3.6.1.4.1.6141.2.60.35.1.1.25.17
wwpLeosCfmGlobalLinkTraceMsgStatsClear
Description and OID
Setting this object to clear(1) clears link trace statistics globally (global, service current
and MEP statistics).
read-write
1.3.6.1.4.1.6141.2.60.35.1.1.25.18
wwpLeosCfmGlobalDelayMeasurementMsgStatsClear
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.35.1.1.25.19
wwpLeosCfmGlobalLossMeasurementMsgStatsClear
1.3.6.1.4.1.6141.2.60.35.1.1.25.20
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-9
wwpLeosCfmTotalRxDropBlockedOppositeMep
Description and OID
Status
Access
current
read-only
Status
Access
current
read-write
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.1.25.21
wwpLeosCfmGlobalSLMMeasurementMsgStatsClear
1.3.6.1.4.1.6141.2.60.35.1.1.25.22
wwpLeosCfmRxInvalidEtypeDropped
1.3.6.1.4.1.6141.2.60.35.1.1.25.23
wwpLeosCfmTotalTxCCM
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.1
wwpLeosCfmTotalTxCCMFlooded
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.2
wwpLeosCfmTotalRxValidCCM
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-10 WWP-LEOS-CFM-MIB
wwpLeosCfmTotalRxCCMInSequence
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.4
wwpLeosCfmTotalRxCCMSequenceError
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.5
wwpLeosCfmTotalCCMRxMDLevelXcon
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.6
wwpLeosCfmTotalCCMRxMAIDXcon
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.7
wwpLeosCfmTotalRxCCMErrorOnMepId
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.8
wwpLeosCfmTotalRxCCMIntervalError
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-11
wwpLeosCfmTotalRxInvalidCCM
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.10
wwpLeosCfmTotalTxLBM
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.1
wwpLeosCfmTotalTxLBR
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.2
wwpLeosCfmTotalRxInOderLBR
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.3
wwpLeosCfmTotalRxOOOLBR
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.4
wwpLeosCfmTotalRxContentMismatchLBR
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-12 WWP-LEOS-CFM-MIB
wwpLeosCfmTotalRxUnexpectedLBR
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.6
wwpLeosCfmTotalRxInvalidLBR
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.7
wwpLeosCfmTotalRxvalidLBM
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.8
wwpLeosCfmTotalRxInvalidLBM
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.9
wwpLeosCfmTotalTxLTM
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.1
wwpLeosCfmTotalTxLTR
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-13
wwpLeosCfmTotalRxValidLTM
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.3
wwpLeosCfmTotalRxValidLTR
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.4
wwpLeosCfmTotalRxUnexpectedLTR
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.5
wwpLeosCfmTotalRxInvalidLTR
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.6
wwpLeosCfmInvalidLTRRelayAction
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.7
wwpLeosCfmTotalRxInvalidLTM
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-14 WWP-LEOS-CFM-MIB
wwpLeosCfmRxUnresolvedLTM
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.9
wwpLeosCfmTotalTxDMM
1.3.6.1.4.1.6141.2.60.35.1.1.25.29.1
wwpLeosCfmTotalTxDMR
1.3.6.1.4.1.6141.2.60.35.1.1.25.29.2
wwpLeosCfmTotalRxDMM
1.3.6.1.4.1.6141.2.60.35.1.1.25.29.3
wwpLeosCfmTotalRxDMR
1.3.6.1.4.1.6141.2.60.35.1.1.25.29.4
wwpLeosCfmTotalTxLMM
1.3.6.1.4.1.6141.2.60.35.1.1.25.30.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-15
wwpLeosCfmTotalTxLMR
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.1.25.30.2
wwpLeosCfmTotalRxLMM
1.3.6.1.4.1.6141.2.60.35.1.1.25.30.3
wwpLeosCfmTotalRxLMR
1.3.6.1.4.1.6141.2.60.35.1.1.25.30.4
wwpLeosCfmTotalTxSLM
1.3.6.1.4.1.6141.2.60.35.1.1.25.31.1
wwpLeosCfmTotalTxSLR
1.3.6.1.4.1.6141.2.60.35.1.1.25.31.2
wwpLeosCfmTotalRxSLM
1.3.6.1.4.1.6141.2.60.35.1.1.25.31.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-16 WWP-LEOS-CFM-MIB
wwpLeosCfmTotalRxSLR
Description and OID
Status
Access
current
read-only
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.35.1.1.25.31.4
wwpLeosCfmGlobalDMMDefaultCount
1.3.6.1.4.1.6141.2.60.35.1.1.26
wwpLeosCfmGlobalDMMDefaultInterval
1.3.6.1.4.1.6141.2.60.35.1.1.27
wwpLeosCfmGlobalDMMDefaultTimeout
1.3.6.1.4.1.6141.2.60.35.1.1.28
wwpLeosCfmGlobalLMMDefaultCount
1.3.6.1.4.1.6141.2.60.35.1.1.29
wwpLeosCfmGlobalLMMDefaultInterval
1.3.6.1.4.1.6141.2.60.35.1.1.30
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-17
wwpLeosCfmGlobalLMMDefaultTimeout
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.1.31
wwpLeosCfmGlobalVsAutoMepCreate
1.3.6.1.4.1.6141.2.60.35.1.1.32
wwpLeosCfmServiceTable
Description and OID
current
The (conceptual) table listing the configuration parameters for the CFM
Service Table. To create an entry in this table the following criteria must be
followed: -wwpLeosCfmServiceType must be specified. wwpLeosCfmServiceValue must be specified. -wwpLeosCfmServiceName
must be specified. -wwpLeosCfmServiceStatus must be set to createAndGo.
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.2.1
wwpLeosCfmServiceEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.35.1.2.1.1
wwpLeosCfmServiceIndex
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-18 WWP-LEOS-CFM-MIB
wwpLeosCfmServiceType
Description and OID
Status
current
This object is used to specify the service type. Interpretation of
wwpLeosCfmServiceValue depends on the value of this MIB object. This MIB
object along with wwpLeosCfmServiceValue must be unique for each entry in
this table
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.2
wwpLeosCfmServiceValue
Description and OID
Status
current
This object is used to specify the service value. Interpretation of this object
depends on the value of wwpLeosCfmServiceType. This MIB object along with
wwpLeosCfmServiceType must be unique for each entry in this table
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.3
wwpLeosCfmServiceAdminState
Description and OID
Status
Access
current
read-write
Status
Access
current
read-only
Status
Access
This MIB object allows the user to set the time interval that a service fault
detected by wwpLeosCfmServiceType must be present before triggering a
fault alarm.
current
read-write
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.4
wwpLeosCfmServiceOperState
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.5
wwpLeosCfmServiceAlarmTime
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-19
wwpLeosCfmServiceCCMInterval
Description and OID
Status
This MIB object allows the user to set the CCM transmission interval index for current
the service specified by wwpLeosCfmServiceType. This determines the
frequency at which CCMs are transmitted. The length of the interval increases
exponentially with the index value. Setting the interval to 0 disables CCM
transmission from all MEPs in the MA.
Access
read-write
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.7
wwpLeosCfmServiceName
Description and OID
Status
Access
This MIB object allows the user to set the CFM service name.
current
read-create
Status
Access
This MIB object sets the CFM service level which associates it with a
Maintenance Domain.
current
read-create
Status
Access
This MIB object sets the time interval during which no service faults can be
detected before the service resets a fault alarm.
current
read-write
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.9
wwpLeosCfmServiceMdLevel
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.10
wwpLeosCfmServiceResetTime
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.11
wwpLeosCfmServiceLastFaultCCM
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.12
wwpLeosCfmServiceRMEPFailureFlag
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.13
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-20 WWP-LEOS-CFM-MIB
wwpLeosCfmServiceCCMErrorFlag
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.14
wwpLeosCfmServiceCrossConnectErrorFlag
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.15
wwpLeosCfmServiceNumMEP
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.16
wwpLeosCfmServiceNumRemoteMEP
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.17
wwpLeosCfmServiceNumActiveMEP
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.18
wwpLeosCfmServiceStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, a manager must set this object to 'createAndGo'.
To delete a row in this table, set this object to 'destroy'.
read-create
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.19
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-21
wwpLeosCfmServiceNextMepId
Description and OID
Status
Access
This mib object specifies the next MEP Id for given service.
current
read-create
Status
Access
This mib object specifies the alarm priority for given service.
current
read-write
Status
Access
The number of CCM frames that must go undelivered for the service to be
declared as operationally down.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.20
wwpLeosCfmServiceAlarmPriority
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.21
wwpLeosCfmServiceNumCCMForFault
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.22
wwpLeosCfmServiceDMMInterval
Description and OID
This MIB object allows the user to set the DMM transmission interval index for current
the service specified by wwpLeosCfmServiceType. This determines the
frequency at which DMMs are transmitted. The length of the interval increases
exponentially with the index value.
read-write
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.23
wwpLeosCfmServiceLMMInterval
Description and OID
Status
This MIB object allows the user to set the LMM transmission interval index for current
the service specified by wwpLeosCfmServiceType. This determines the
frequency at which LMMs are transmitted. The length of the interval increases
exponentially with the index value.
Access
read-write
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.24
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-22 WWP-LEOS-CFM-MIB
wwpLeosCfmServiceCCMLossStatsState
Description and OID
Status
This object specifies the operational state of CCM loss accounting for RMEPs current
learned by this service type.
Access
read-write
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.25
wwpLeosCfmServiceCCMLossBucketInterval
Description and OID
Status
Access
This object specifies the interval in minutes that each of the 96 CCM loss
history buckets span. The default is 15 minutes, which means the default
history covers 24 hours.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.26
wwpLeosCfmServiceRemoteMepDiscovery
Description and OID
current
This object specifies whether remote MEPs should be discovered
automatically. If this object is set to enable it causes remote MEPs to be
discovered automatically and if set to disable does not discover remote MEPs.
read-write
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.27
wwpLeosCfmServiceY1731
Description and OID
Status
Access
current
read-write
Status
Access
current
read-create
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.28
wwpLeosCfmServiceAccelerated
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.49
wwpLeosCfmServiceTlvSenderIdType
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.50
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-23
wwpLeosCfmServiceRMEPHoldTime
Description and OID
Status
Access
This mib object specifies the Remote MEP hold time in milliseconds.
current
read-create
Status
Access
This mib object specifies the admin state of the CCM Tx.
current
read-create
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.51
wwpLeosCfmServiceCCMTxState
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.52
wwpLeosCfmServicePortStatusFlag
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.53
wwpLeosCfmServiceRDIFlag
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.54
wwpLeosCfmServiceInstabilityFlag
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.55
wwpLeosCfmServiceRMEPAging
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.56
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-24 WWP-LEOS-CFM-MIB
wwpLeosCfmServiceDefaultMEPType
Description and OID
Status
Access
This object is used to specify the type of all MEP's created for the service.
Services of type PBT must specify a MEP type of 'down'.
deprecated
read-create
Status
Access
deprecated
read-only
Status
Access
deprecated
read-write
Status
Access
deprecated
read-write
Status
Access
deprecated
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.57
wwpLeosCfmServiceMAID
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.58
wwpLeosCfmServiceMdIndex
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.59
wwpLeosCfmServiceMaintAssocNameType
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.60
wwpLeosCfmServiceMaintAssocName
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.61
wwpLeosCfmServiceMulticastDa
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.65
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-25
wwpLeosCfmServiceChargedAgainstGlobalFrameBudget
Description and OID
Status
Access
This MIB object reflects if this service is charged against the global frame
budget.
current
read-only
Status
Access
This object is used to specify the type of all MEP's created for the service.
Services of type PBT must specify a MEP type of 'down'.
current
read-create
Status
Access
current
read-only
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.71
wwpLeosCfmServiceCfmDefaultMEPType
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.72
wwpLeosCfmServiceCfmMAID
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.73
wwpLeosCfmServiceCfmMdIndex
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.74
wwpLeosCfmServiceCfmMaintAssocNameType
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.75
wwpLeosCfmServiceCfmMaintAssocName
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.76
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-26 WWP-LEOS-CFM-MIB
wwpLeosCfmServiceCfmControlModuleFrameBudget
Description and OID
Status
Access
Cfm Frame budget for control module for the given service.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.77
wwpLeosCfmServiceFaultTable
Description and OID
The (conceptual) table used for Fault Traps. The last CFM error that occurred current
is reported.
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.2.2
wwpLeosCfmServiceFaultEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.2.2.1
wwpLeosCfmServiceFaultTime
1.3.6.1.4.1.6141.2.60.35.1.2.2.1.1
wwpLeosCfmServiceFaultType
1.3.6.1.4.1.6141.2.60.35.1.2.2.1.2
wwpLeosCfmServiceFaultDesc
1.3.6.1.4.1.6141.2.60.35.1.2.2.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-27
wwpLeosCfmServiceFaultMep
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
This object represents the virtual switch or Pbt tunnel assigned to the given
service.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.2.2.1.4
wwpLeosCfmServiceVlan
1.3.6.1.4.1.6141.2.60.35.1.2.2.1.5
wwpLeosCfmServiceVsPbtName
1.3.6.1.4.1.6141.2.60.35.1.2.2.1.50
wwpLeosCfmServiceStatisticsTable
Description and OID
current
The (conceptual) table listing the configuration parameters for the CFM
Service Table. To create an entry in this table, the following criteria must be
met: wwpLeosCfmServiceType must be specified. wwpLeosCfmServiceValue
must be specified. wwpLeosCfmServiceName must be specified.
wwpLeosCfmServiceStatus must be set to createAndGo.
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.2.3
wwpLeosCfmServiceStatisticsEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.2.3.1
wwpLeosCfmServiceRxTotalValidFrames
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-28 WWP-LEOS-CFM-MIB
wwpLeosCfmServiceRxTotalInvalidFrames
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.2
wwpLeosCfmServiceInvalidMessageOverflow
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.3
wwpLeosCfmServiceInvalidPortStatusTLV
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.4
wwpLeosCfmServiceInvalidInterfaceStatusTLV
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.5
wwpLeosCfmServiceInvalidSenderIDTLV
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.6
wwpLeosCfmServiceTxTotalCCM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-29
wwpLeosCfmServiceTotalRxValidCCM
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.8
wwpLeosCfmServiceTotalRxInSequenceCCM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.9
wwpLeosCfmServiceTotalRxNotInSequenceCCM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.10
wwpLeosCfmServiceTotalRxMDLevelXconCCM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.11
wwpLeosCfmServiceTotalRxMAIDXconCCM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.12
wwpLeosCfmServiceTotalRxMEPIDErrorCCM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.13
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-30 WWP-LEOS-CFM-MIB
wwpLeosCfmServiceTotalRxCCMIntervalErrorCCM
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.14
wwpLeosCfmServiceTotalRxInvalidCCM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.15
wwpLeosCfmServiceTotalTxLTM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.16
wwpLeosCfmServiceTotalTxLTR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.17
wwpLeosCfmServiceTotalRxValidLTR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.18
wwpLeosCfmServiceTotalRxUnexpectedLTR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.19
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-31
wwpLeosCfmServiceTotalRxInvalidLTR
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.20
wwpLeosCfmServiceTotalRxInvalidRelayActionLTR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.21
wwpLeosCfmServiceTotalRxValidLTM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.22
wwpLeosCfmServiceTotalTxInvalidLTM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.23
wwpLeosCfmServiceTotalTxLBM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.24
wwpLeosCfmServiceTotalTxLBR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.25
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-32 WWP-LEOS-CFM-MIB
wwpLeosCfmServiceTotalRxInorderLBR
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.26
wwpLeosCfmServiceTotalRxOutOfOrderLBR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.27
wwpLeosCfmServiceTotalRxContentMismatchLBR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.28
wwpLeosCfmServiceTotalRxUnexpectedLBR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.29
wwpLeosCfmServiceTotalRxInvalidLBR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.30
wwpLeosCfmServiceTotalRxValidLBM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.31
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-33
wwpLeosCfmServiceTotalRxInvalidLBM
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.32
wwpLeosCfmServiceTotalTxDMM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.33
wwpLeosCfmServiceTotalTxDMR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.34
wwpLeosCfmServiceTotalRxDMM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.35
wwpLeosCfmServiceTotalRxDMR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.36
wwpLeosCfmServiceTotalTxLMM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.37
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-34 WWP-LEOS-CFM-MIB
wwpLeosCfmServiceTotalTxLMR
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.38
wwpLeosCfmServiceTotalRxLMM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.39
wwpLeosCfmServiceTotalRxLMR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.40
wwpLeosCfmServiceStatsClear
Description and OID
Setting this object to clear(1) clears statistics for the given service index. This current
object cannot be set to none
read-write
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.41
wwpLeosCfmServiceTotalTxSLM
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.42
wwpLeosCfmServiceTotalTxSLR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.43
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-35
wwpLeosCfmServiceTotalRxSLM
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Setting this object to clear(1) clears all service level statistics for all services
and within each mep.
current
read-write
Status
Access
The (conceptual) table listing the configuration parameters for the CFM MIP
Table. This table is not applicable if wwpLeosCfmServiceType is set to
pbtTunnel. Any Get/Set/Walk returns an error.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This object is the index in the table and is used to specify the VLAN service
type for which intermediate maintenance points can be created.
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.44
wwpLeosCfmServiceTotalRxSLR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.45
wwpLeosCfmServiceClearStats
1.3.6.1.4.1.6141.2.60.35.1.2.4
wwpLeosCfmMipTable
1.3.6.1.4.1.6141.2.60.35.1.3.1
wwpLeosCfmMipEntry
1.3.6.1.4.1.6141.2.60.35.1.3.1.1
wwpLeosCfmMipVid
1.3.6.1.4.1.6141.2.60.35.1.3.1.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-36 WWP-LEOS-CFM-MIB
wwpLeosCfmMipPort
Description and OID
Status
Access
This object is used as index in the table and is used to specify the port.
current
read-only
Status
Access
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.3.1.1.2
wwpLeosCfmMipLevel
1.3.6.1.4.1.6141.2.60.35.1.3.1.1.3
wwpLeosCfmMipStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, set it to 'destroy'.
read-create
1.3.6.1.4.1.6141.2.60.35.1.3.1.1.4
wwpLeosCfmLinkTraceMsgTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.4.1
wwpLeosCfmLinkTraceMsgEntry
1.3.6.1.4.1.6141.2.60.35.1.4.1.1
wwpLeosCfmLinkTraceMsgPortId
1.3.6.1.4.1.6141.2.60.35.1.4.1.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-37
wwpLeosCfmLinkTraceMsgTargetMEPID
Description and OID
Status
This object is used to specify the target MEPID. This object should only be set current
if wwpLeosCfmLinkTraceMsgTargetMacAddr is not specified else an error is
returned.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.4.1.1.2
wwpLeosCfmLinkTraceMsgTargetMacAddr
Description and OID
Status
This object is used to specify the target MacAddress to be used when sending current
link LinkMsg. This object should only be set if
wwpLeosCfmLinkTraceMsgTargetMEPID is not specified else an error is
returned.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.4.1.1.3
wwpLeosCfmLinkTraceMsgTTL
Description and OID
Status
Access
This object is used to specify the TTL to be used when sending link
LinkTraceMsg.
current
read-create
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.4.1.1.4
wwpLeosCfmLinkTraceMsgSequenceNumber
1.3.6.1.4.1.6141.2.60.35.1.4.1.1.5
wwpLeosCfmLinkTraceMsgRowStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, set this to 'destroy'.
read-create
1.3.6.1.4.1.6141.2.60.35.1.4.1.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-38 WWP-LEOS-CFM-MIB
wwpLeosCfmLinkTraceMsgPriority
Description and OID
Status
Access
current
read-create
Status
Access
current
read-only
Status
Access
This object represents the sub-port name where the LinkTraceMsg was sent. current
read-only
1.3.6.1.4.1.6141.2.60.35.1.4.1.1.7
wwpLeosCfmLinkTraceMsgServiceName
1.3.6.1.4.1.6141.2.60.35.1.4.1.1.50
wwpLeosCfmLinkTraceMsgSubPortName
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.4.1.1.52
wwpLeosCfmLinkTraceMsgVsIndex
Description and OID
Status
Access
This object represents the virtual switch where the LinkTraceMsg was sent.
current
read-only
Status
Access
current
read-only
Status
Access
This object represents the total LinkTraceMsg were received from the
LinkTraceResponse.
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.4.1.1.53
wwpLeosCfmLinkTraceMsgTotalTxLtm
1.3.6.1.4.1.6141.2.60.35.1.4.1.1.54
wwpLeosCfmLinkTraceMsgTotalRxLtr
1.3.6.1.4.1.6141.2.60.35.1.4.1.1.55
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-39
wwpLeosCfmLinkTraceMsgReplyTable
Description and OID
Status
Access
The (conceptual) table listing the display parameters for the LinkTrace Msg
Reply.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This object is used to specify the ttl of the received LinkTrace msg reply.
current
read-only
Status
Access
current
read-only
Status
Access
This object is used to specify the sequence number of the received LinkTrace current
msg reply.
read-only
1.3.6.1.4.1.6141.2.60.35.1.4.2
wwpLeosCfmLinkTraceMsgReplyEntry
1.3.6.1.4.1.6141.2.60.35.1.4.2.1
wwpLeosCfmLinkTraceMsgReplyTTL
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.1
wwpLeosCfmLinkTraceMsgReplyTTLIndex
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.2
wwpLeosCfmLinkTraceMsgReplySequenceNumber
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.3
wwpLeosCfmLinkTraceMsgReplyMPMacAddr
Description and OID
Status
Access
This object is used to specify the mac address of the MP of received LinkTrace current
msg reply.
read-only
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-40 WWP-LEOS-CFM-MIB
wwpLeosCfmLinkTraceMsgReplyMEPID
Description and OID
Status
Access
This object is used to specify the MEP ID of the received LinkTrace msg reply. current
read-only
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.5
wwpLeosCfmLinkTraceMsgReplyTargetMacAddr
Description and OID
Status
Access
This object is used to specify the Target Mac address of the received
LinkTrace msg reply.
current
read-only
Status
Access
current
read-only
Status
Access
obsolete
read-only
Status
Access
current
read-only
Status
Access
obsolete
read-only
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.6
wwpLeosCfmLinkTraceMsgReplyRelayAction
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.7
wwpLeosCfmLinkTraceMsgReplyIngressPort
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.8
wwpLeosCfmLinkTraceMsgReplyIngressAction
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.9
wwpLeosCfmLinkTraceMsgReplyEgressPort
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-41
wwpLeosCfmLinkTraceMsgReplyEgressAction
Description and OID
Status
Access
current
read-only
Status
Access
This mib object is used to specify the message reply ingress port.
current
read-only
Status
Access
This mib object is used to specify the message reply egress port.
current
read-only
Status
Access
This object is used to specify the message reply ingress mac address.
current
read-only
Status
Access
This object is used to specify the message reply egress mac address.
current
read-only
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.11
wwpLeosCfmLinkTraceMsgReplyIngressPortStr
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.12
wwpLeosCfmLinkTraceMsgReplyEgressPortStr
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.13
wwpLeosCfmLinkTraceMsgReplyIngressMacAddr
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.50
wwpLeosCfmLinkTraceMsgReplyEgressMacAddr
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.51
wwpLeosCfmLoopbackMsgTable
1.3.6.1.4.1.6141.2.60.35.1.5.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-42 WWP-LEOS-CFM-MIB
wwpLeosCfmLoopbackMsgEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
This object is used to specify the MEPID. This object should only be set if
wwpLeosCfmLoopbackMsgTargetMacAddr is not specified else an error is
returned.
current
read-create
Status
Access
This object is used to specify the MacAddress to be used when sending link
LoopbackMsg. This object should only be set if
wwpLeosCfmLoopbackMsgTargetMEPID is not specified else an error is
returned.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.5.1.1
wwpLeosCfmLoopbackMsgPortId
1.3.6.1.4.1.6141.2.60.35.1.5.1.1.1
wwpLeosCfmLoopbackMsgTargetMEPID
1.3.6.1.4.1.6141.2.60.35.1.5.1.1.2
wwpLeosCfmLoopbackMsgTargetMacAddr
1.3.6.1.4.1.6141.2.60.35.1.5.1.1.3
wwpLeosCfmLoopbackMsgCount
Description and OID
This object is used to specify the LoopbackMsg count to be used when sending current
link LoopbackMsg.
read-create
1.3.6.1.4.1.6141.2.60.35.1.5.1.1.4
wwpLeosCfmLoopbackMsgData
Description and OID
Status
This object is used to specify the LoopbackMsg data to be used when sending current
link LoopbackMsg.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.5.1.1.5
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-43
wwpLeosCfmLoopbackMsgPriority
Description and OID
Status
Access
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.5.1.1.6
wwpLeosCfmLoopbackMsgRowStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, set this to 'destroy'.
read-create
1.3.6.1.4.1.6141.2.60.35.1.5.1.1.7
wwpLeosCfmLoopbackMsgDefaultInterval
Description and OID
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
The (conceptual) table listing the configuration parameters for the CFM
Maintenance Domain Table.
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.5.1.1.8
wwpLeosCfmLoopbackMsgDefaultTimeout
1.3.6.1.4.1.6141.2.60.35.1.5.1.1.9
wwpLeosCfmMaintenanceDomainTable
1.3.6.1.4.1.6141.2.60.35.1.6.1
wwpLeosCfmMaintenanceDomainEntry
1.3.6.1.4.1.6141.2.60.35.1.6.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-44 WWP-LEOS-CFM-MIB
wwpLeosCfmMaintenanceDomainIndex
Description and OID
Status
Access
current
read-only
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-only
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.6.1.1.1
wwpLeosCfmMaintenanceDomainLevel
1.3.6.1.4.1.6141.2.60.35.1.6.1.1.2
wwpLeosCfmMaintenanceDomainName
1.3.6.1.4.1.6141.2.60.35.1.6.1.1.3
wwpLeosCfmMaintenanceDomainServiceCount
1.3.6.1.4.1.6141.2.60.35.1.6.1.1.4
wwpLeosCfmMaintenanceDomainMdFormat
1.3.6.1.4.1.6141.2.60.35.1.6.1.1.5
wwpLeosCfmMaintenanceDomainMdName
Description and OID
The Maintenance Domain name. The type/format of this object is determined current
by the value of the wwpLeosCfmMaintenanceDomainMdFormat object.
read-write
1.3.6.1.4.1.6141.2.60.35.1.6.1.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-45
wwpLeosCfmMaintenanceDomainStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo' and specify, at a
minimum, the wwpLeosCfmMaintenanceDomainLevel and
wwpLeosCfmMaintenanceDomainName objects. During a create/set
operation, if a non-default MdFormat is required, both the
wwpLeosCfmMaintenanceDomainMdFormat and
wwpLeosCfmMaintenanceDomainMdName objects must also be specified. To
delete a row in this table, set this object to 'destroy'.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.6.1.1.7
wwpLeosCfmMEPTable
Description and OID
Status
The (conceptual) table listing the configuration parameters for the CFM MEP current
table. This table is not supported on 39xx/51xx platforms, use
wwpLeosCfmExtMEPEntry instead.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.7.1
wwpLeosCfmMEPEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.35.1.7.1.1
wwpLeosCfmMEPPort
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.1
wwpLeosCfmMEPAdminState
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-46 WWP-LEOS-CFM-MIB
wwpLeosCfmMEPOperState
Description and OID
Status
Access
obsolete
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.3
wwpLeosCfmMEPDirection
Description and OID
This object is used to specify the MEP direction of the service. This object can current
only be set if wwpLeosCfmServiceIndex is of type vlan.
read-create
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.4
wwpLeosCfmMEPCCMState
Description and OID
Status
Access
This object specifies the CCM transmission for the service specified by
wwpLeosCfmServiceType.
current
read-write
Status
Access
current
read-write
Status
Access
This object specifies the priority received on the given service and port.
obsolete
read-write
Status
Access
This object specifies the MEP id for the given service and port.
current
read-create
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.5
wwpLeosCfmMEPCCMPriority
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.6
wwpLeosCfmMEPLTMPriority
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.7
wwpLeosCfmMEPId
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-47
wwpLeosCfmMEPMacAddr
Description and OID
Status
Access
This object specifies the MAC address received on the given service and port.. current
read-only
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.9
wwpLeosCfmMEPNextLbmSeqNumber
Description and OID
Status
Access
This object specifies the next lbm sequence number received on the given
service and port.
current
read-only
Status
Access
This object specifies the total valid in order loopback replies received on the
given service and port.
current
read-only
Status
Access
This object specifies the total valid out of order loopback replies received on
the given service and port.
current
read-only
Status
Access
This object specifies the next LTM serquence number received on the given
service and port.
current
read-only
Status
Access
This object specifies the flags total loopback replies transmitted on the given
service and port.
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.10
wwpLeosCfmMEPRxValidInOrderLoopbackReply
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.11
wwpLeosCfmMEPRxValidOutOrderLoopbackReply
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.12
wwpLeosCfmMEPNextLTMSeqNumber
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.13
wwpLeosCfmMEPNumLoopbackRepliesTxmt
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.14
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-48 WWP-LEOS-CFM-MIB
wwpLeosCfmMEPNumLTMReceived
Description and OID
Status
Access
This object specifies the total LTM messages received on the given service
and port.
current
read-only
Status
Access
This object specifies the total LTM transmitted on the given service and port. current
read-only
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.15
wwpLeosCfmMEPNumLTMTxmt
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.16
wwpLeosCfmMEPNumCCMTxmt
Description and OID
Status
Access
This object specifies the total CCM messages transmitted on the given service current
and port.
read-only
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.17
wwpLeosCfmMEPRowStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, set this to 'destroy'.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.18
wwpLeosCfmMEPNumDMMSent
Description and OID
Status
Access
current
read-only
Status
Access
This object specifies the average delay in microseconds measured during the current
last DMM performance test on the given service and port.
read-only
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.19
wwpLeosCfmMEPDMMDelay
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.20
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-49
wwpLeosCfmMEPDMMJitter
Description and OID
Status
Access
This object specifies the average jitter in microseconds measured during the
last DMM performance test on the given service and port.
current
read-only
Status
Access
The total frame loss measurement messages transmitted during the last test
performed on the given service and port.
current
read-only
Status
Access
This object specifies the number of lost frames on the near side measured
during the last LMM performance test on the given service and port.
current
read-only
Status
Access
This object specifies the number of lost frames on the far side measured during current
the last LMM performance test on the given service and port.
read-only
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.21
wwpLeosCfmMEPNumLMMSent
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.22
wwpLeosCfmMEPLMMFrameLossNear
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.23
wwpLeosCfmMEPLMMFrameLossFar
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.24
wwpLeosCfmMEPNumLMRReceived
Description and OID
Status
Access
This object specifies the total number of frame loss measurement replies
received during the last test performed on the given service and port. If this
count is zero, the near and far frame loss counts are probably invalid as
connectivity to the device being tested was not available.
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.25
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-50 WWP-LEOS-CFM-MIB
wwpLeosCfmMEPNumDMRReceived
Description and OID
Status
Access
This object specifies the total number of delay measurement replies received current
during the last test performed on the given service and port. If this count is not
equal to the number of delay measurement frames sent, the jitter and delay are
probably invalid as connectivity to the device being tested was not stable.
read-only
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.26
wwpLeosCfmMEPDMMMinDelay
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.27
wwpLeosCfmMEPDMMMaxDelay
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.28
wwpLeosCfmMEPDMMMinJitter
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.29
wwpLeosCfmMEPDMMMaxJitter
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.30
wwpLeosCfmMEPServiceName
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.50
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-51
wwpLeosCfmMEPSubPortName
Description and OID
Status
Access
This object specifies the sub-port name assigned to the given service and port. current
read-only
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.51
wwpLeosCfmMEPVsPbtName
Description and OID
Status
Access
This object specifies the virtual switch or Pbt tunnel assigned to the given
service and port.
current
read-only
Status
Access
This object specifies the logical port name assigned to the given service and
port.
current
read-only
Status
Access
current
read-only
Status
Access
This object specifies the encapsulation applied to the service and port.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.52
wwpLeosCfmMEPLogicalPortName
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.53
wwpLeosCfmMEPSubPortIndex
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.54
wwpLeosCfmMEPEncapsulation
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.55
wwpLeosCfmMEPLeadPortBayIndex
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.56
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-52 WWP-LEOS-CFM-MIB
wwpLeosCfmMEPLeadPortShelfIndex
Description and OID
Status
Access
current
read-only
Status
Access
This object specifies the agent module the MEP is in. Index = 255 is reserved current
for Lag ports and this object cannot be set to 255 in this table.
read-only
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.57
wwpLeosCfmMEPLeadPortModuleIndex
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.58
wwpLeosCfmMEPPBTBvid
Description and OID
Status
Access
This object specifies the BVID assigned to the given service and port.
current
read-only
Status
Access
This object specifies the E-type assigned to the given service and port.
current
read-only
Status
Access
This object specifies the total loopback messages transmitted on the given
service and port.
current
read-only
Status
Access
This object specifies the total loopback messages received on the given
service and port.
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.59
wwpLeosCfmMEPPBTEtype
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.60
wwpLeosCfmMEPNumLbmTxmt
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.61
wwpLeosCfmMEPNumLbmReceived
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.62
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-53
wwpLeosCfmMEPNumLoopbackRepliesReceived
Description and OID
Status
Access
This object specifies the total loopback replies received on the given service
and port.
current
read-only
Status
Access
This object specifies the total link trace replies transmitted on the given service current
and port.
read-only
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.63
wwpLeosCfmMEPNumLTRepliesTxmt
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.64
wwpLeosCfmMEPNumLTRepliesReceived
Description and OID
Status
Access
This object specifies the total link trace replies received on the given service
and port.
current
read-only
Status
Access
This object specifies the total unexpected link trace replies received on the
given service and port.
current
read-only
Status
Access
This object specifies the total CCM messages received on the given service
and port.
current
read-only
Status
Access
The (conceptual) table listing the display parameters for the Remote MEP
table.
current
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.65
wwpLeosCfmMEPNumUnexpectedLTRepliesReceived
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.66
wwpLeosCfmMEPNumCCMReceived
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.67
wwpLeosCfmRemoteMEPTable
1.3.6.1.4.1.6141.2.60.35.1.8.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-54 WWP-LEOS-CFM-MIB
wwpLeosCfmRemoteMEPEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
This object specifies the administrative state of the Remote MEP State
Machine.
current
read-write
Status
Access
The object specifies the operational state of the Remote MEP State Machine. current
A 'disabled' state means the remote mep is admin disabled. An 'enabled' state
means the remote mep is operationally enabled. A 'hold' state means the
remote mep is admin enabled but currently in operational hold state. A
'holdLocked' state means the remote mep is locked in hold state.
read-only
1.3.6.1.4.1.6141.2.60.35.1.8.1.1
wwpLeosCfmRemoteMEPID
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.1
wwpLeosCfmRemoteMEPAdminState
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.2
wwpLeosCfmRemoteMEPOperState
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.3
wwpLeosCfmRemoteMEPTime
Description and OID
Status
Access
This object specifies the time at which the Remote MEP State Machine last
entered RMEP_FAILED or RMEP_OK states.
current
read-only
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.4
wwpLeosCfmRemoteMEPMacAddr
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-55
wwpLeosCfmRemoteMEPKLastMacStatus
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
This object is used to show the number of MEP CCM frames received.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.6
wwpLeosCfmRemoteMEPFailureFlag
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.7
wwpLeosCfmRemoteMEPCCMErrorFlag
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.8
wwpLeosCfmRemoteMEPRDIErrorFlag
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.9
wwpLeosCfmRemoteMEPNumCCMRx
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.10
wwpLeosCfmRemoteMEPNumDMMSent
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-56 WWP-LEOS-CFM-MIB
wwpLeosCfmRemoteMEPDelay
Description and OID
Status
Access
This object is used to show the average Delay in microseconds during the last current
Delay Measurement test.
read-only
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.12
wwpLeosCfmRemoteMEPJitter
Description and OID
Status
Access
This object is used to show the average Jitter in microseconds during the last current
Delay Measurement test.
read-only
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.13
wwpLeosCfmRemoteMEPNumLMMSent
Description and OID
Status
Access
current
read-only
Status
Access
This object is used to show the near side Frame Loss during the last Frame
Loss Measurement test.
current
read-only
Status
Access
This object is used to show the far side Frame Loss during the last Frame Loss current
Measurement test.
read-only
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.14
wwpLeosCfmRemoteMEPFrameLossNear
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.15
wwpLeosCfmRemoteMEPFrameLossFar
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.16
wwpLeosCfmRemoteMEPNumLMRReceived
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.17
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-57
wwpLeosCfmRemoteMEPNumCCMLost
Description and OID
Status
Access
This object is used to show the number of MEP CCM frames lost, as calculated current
by watching for CCM sequence errors.
read-only
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.18
wwpLeosCfmRemoteMEPNumDMRReceived
Description and OID
Status
Access
current
read-only
Status
Access
deprecated
read-create
Status
Access
current
read-create
Status
Access
This mib object contains the CCM Comment, if available, that was sent by the current
remote Ciena device.
read-only
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.19
wwpLeosCfmRemoteMEPHoldState
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.20
wwpLeosCfmRemoteMEPRowStatus
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.21
wwpLeosCfmRemoteMEPCCMComment
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.22
wwpLeosCfmRemoteMEPBadSequence
Description and OID
Status
Access
This mib object contains the number of LMR frames received with bad
sequence number, for a given service and remote mep.
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.23
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-58 WWP-LEOS-CFM-MIB
wwpLeosCfmRemoteMEPMinDelay
Description and OID
Status
Access
The minimum Delay in microseconds during the last Delay Measurement test. current
read-only
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.24
wwpLeosCfmRemoteMEPMaxDelay
Description and OID
Status
Access
The maximum Delay in microseconds during the last Delay Measurement test. current
read-only
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.25
wwpLeosCfmRemoteMEPMinJitter
Description and OID
Status
Access
The minimum jitter in microseconds during the last Delay Measurement test.
current
read-only
Status
Access
The maximum jitter in microseconds during the last Delay Measurement test. current
read-only
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.26
wwpLeosCfmRemoteMEPMaxJitter
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.27
wwpLeosCfmRemoteCfmMEPHoldState
Description and OID
Status
Access
current
read-create
Status
Access
Setting this object to true causes the remote MEP for this service to be reinitialized .
current
read-create
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.28
wwpLeosCfmRemoteMEPServiceClear
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.29
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-59
wwpLeosCfmRemoteMEPServiceStatisticsClear
Description and OID
Status
Access
Setting this object to true resets the statistics for the remote MEP for this
service.
current
read-create
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.30
wwpLeosCfmRemoteMEPAccelerated
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.49
wwpLeosCfmRemoteMEPSubPortName
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.50
wwpLeosCfmRemoteMEPServiceName
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.51
wwpLeosCfmRemoteMEPBayIndex
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.52
wwpLeosCfmRemoteMEPShelfIndex
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.53
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-60 WWP-LEOS-CFM-MIB
wwpLeosCfmRemoteMEPModuleIndex
Description and OID
Status
Access
This object specifies the agent module the MEP is in. Index = 255 is reserved current
for Lag ports and this object cannot be set to 255 in this table.
read-only
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.54
wwpLeosCfmRemoteMEPPreviousBayIndex
Description and OID
Status
Access
This object specifies the agent bay the MEP was previously in.
current
read-only
Status
Access
This object specifies the agent shelf the MEP was previously in.
current
read-only
Status
Access
This object specifies the agent module the MEP was previously in. Index = 255 current
is reserved for Lag ports and this object cannot be set to 255 in this table.
read-only
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.55
wwpLeosCfmRemoteMEPPreviousShelfIndex
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.56
wwpLeosCfmRemoteMEPPreviousModuleIndex
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.57
wwpLeosCfmRemoteMEPLastPortStatus
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.58
wwpLeosCfmRemoteMEPLastInterfaceStatus
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.59
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-61
wwpLeosCfmRemoteMEPLastSeqNum
Description and OID
Status
Access
This object is used to show the last sequence number of the remote MEP.
current
read-only
Status
Access
This object is used to show the number of MEP CCM frames sequence errors. current
read-only
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.60
wwpLeosCfmRemoteMEPCCMSeqErrors
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.61
wwpLeosCfmRemoteMEPCCMLevel
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
This object is used to show the near side Frame Loss during the last Synthetic current
Loss Measurement test.
read-only
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.62
wwpLeosCfmRemoteMEPNumSLMSent
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.66
wwpLeosCfmRemoteMEPSLMFrameLossNear
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.67
wwpLeosCfmRemoteMEPSLMFrameLossFar
Description and OID
Status
Access
This object is used to show the far side Frame Loss during the last Synthetic
Loss Measurement test.
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.68
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-62 WWP-LEOS-CFM-MIB
wwpLeosCfmRemoteMEPNumSLRReceived
Description and OID
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.69
wwpLeosCfmRemoteMEPDeleteAll
Description and OID
Setting this object to true deletes all remote meps. This object always returns current
false.
read-write
1.3.6.1.4.1.6141.2.60.35.1.8.65
wwpLeosCfmPortStackTable
Description and OID
Status
Access
The (conceptual) table listing the display parameters for the CFM port stack
table.
deprecated
not-accessible
Status
Access
deprecated
not-accessible
Status
Access
This object is the index in the table used to specify the port id.
deprecated
read-only
Status
Access
This object is the index in the table used to show the VLAN.
deprecated
read-only
1.3.6.1.4.1.6141.2.60.35.1.9.1
wwpLeosCfmPortStackEntry
1.3.6.1.4.1.6141.2.60.35.1.9.1.1
wwpLeosCfmPortStackPort
1.3.6.1.4.1.6141.2.60.35.1.9.1.1.1
wwpLeosCfmPortStackVid
1.3.6.1.4.1.6141.2.60.35.1.9.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-63
wwpLeosCfmPortStackType
Description and OID
Status
Access
This object is the index in the table used to show the type of Maintenance
Point.
deprecated
read-only
Status
Access
This object is the index in the table and is used to show the level of stack.
deprecated
read-only
Status
Access
deprecated
read-only
Status
Access
The (conceptual) table listing the display parameters for the MIP CCM Db
table.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.9.1.1.3
wwpLeosCfmPortStackLevel
1.3.6.1.4.1.6141.2.60.35.1.9.1.1.4
wwpLeosCfmPortStackMEPId
1.3.6.1.4.1.6141.2.60.35.1.9.1.1.5
wwpLeosCfmMipCCMDbTable
1.3.6.1.4.1.6141.2.60.35.1.10.1
wwpLeosCfmMipCCMDbEntry
1.3.6.1.4.1.6141.2.60.35.1.10.1.1
wwpLeosCfmMipCCMDbIndex
1.3.6.1.4.1.6141.2.60.35.1.10.1.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-64 WWP-LEOS-CFM-MIB
wwpLeosCfmMipCCMDbVid
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.10.1.1.2
wwpLeosCfmMipCCMDbMacAddr
1.3.6.1.4.1.6141.2.60.35.1.10.1.1.3
wwpLeosCfmMipCCMDbPort
1.3.6.1.4.1.6141.2.60.35.1.10.1.1.4
wwpLeosCfmMipCCMDbMEPID
1.3.6.1.4.1.6141.2.60.35.1.10.1.1.5
wwpLeosCfmMipCCMdbNumCCMRx
1.3.6.1.4.1.6141.2.60.35.1.10.1.1.6
wwpLeosCfmMipCCMDbTime
1.3.6.1.4.1.6141.2.60.35.1.10.1.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-65
wwpLeosCfmMipCCMDbLastMacStatus
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-write
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.10.1.1.8
wwpLeosCfmMipCCMDbRDIErrorFlag
1.3.6.1.4.1.6141.2.60.35.1.10.1.1.9
wwpLeosCfmFaultTrapState
1.3.6.1.4.1.6141.2.60.35.1.11.1
wwpLeosCfmDelayMsgTable
1.3.6.1.4.1.6141.2.60.35.1.12.1
wwpLeosCfmDelayMsgEntry
1.3.6.1.4.1.6141.2.60.35.1.12.1.1
wwpLeosCfmDelayMsgPortId
1.3.6.1.4.1.6141.2.60.35.1.12.1.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-66 WWP-LEOS-CFM-MIB
wwpLeosCfmDelayMsgTargetMEPID
Description and OID
Status
Access
This object specifies the MEPID. This object should only be set if
wwpLeosCfmDelayMsgTargetMacAddr is not specified else an error is
returned.
current
read-create
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.12.1.1.2
wwpLeosCfmDelayMsgTargetMacAddr
1.3.6.1.4.1.6141.2.60.35.1.12.1.1.3
wwpLeosCfmDelayMsgCount
1.3.6.1.4.1.6141.2.60.35.1.12.1.1.4
wwpLeosCfmDelayMsgPriority
1.3.6.1.4.1.6141.2.60.35.1.12.1.1.5
wwpLeosCfmDelayMsgRowStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, set this to 'destroy'.
If 'destroy' is used and either
TargetMacAddr or TargetMEPID is
specified, a cancel is done for any
repeating test on those items.
read-create
1.3.6.1.4.1.6141.2.60.35.1.12.1.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-67
wwpLeosCfmDelayMsgRepeat
Description and OID
Status
Access
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.12.1.1.7
wwpLeosCfmDelayMsgRepeatCount
Description and OID
The repeat time in minutes for the Delay Measurement test. If zero is specified, current
the test runs continuously.
read-create
1.3.6.1.4.1.6141.2.60.35.1.12.1.1.8
wwpLeosCfmDelayMsgDelayThreshold
Description and OID
Status
The fault threshold for the Delay Measurement test, specified in microseconds. current
A value of -1 disables the generate of faults. A value of 0 or greater is
compared to the average delay result of the test and a fault is generated if the
threshold is exceeded.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.12.1.1.9
wwpLeosCfmDelayMsgJitterThreshold
Description and OID
Status
The fault threshold for the Jitter Measurement test, specified in microseconds. current
A value of -1 disables the generate of faults. A value of 0 or greater is
compared to the average jitter result of the test and a fault is generated if the
threshold is exceeded.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.12.1.1.10
wwpLeosCfmDelayMsgMaxDelayThreshold
Description and OID
Status
The fault threshold for the Delay Measurement test, specified in microseconds. current
A value of -1 disables the generate of faults. A value of 0 or greater is
compared to the maximum delay result of the test and a fault is generated if
the threshold is exceeded.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.12.1.1.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-68 WWP-LEOS-CFM-MIB
wwpLeosCfmDelayMsgMaxJitterThreshold
Description and OID
Status
The fault threshold for the Jitter Measurement test, specified in microseconds. current
A value of -1 disables the generate of faults. A value of 0 or greater is
compared to the maximum jitter result of the test and a fault is generated if the
threshold is exceeded.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.12.1.1.12
wwpLeosCfmFrameLossMsgTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.13.1
wwpLeosCfmFrameLossMsgEntry
1.3.6.1.4.1.6141.2.60.35.1.13.1.1
wwpLeosCfmFrameLossMsgPortId
1.3.6.1.4.1.6141.2.60.35.1.13.1.1.1
wwpLeosCfmFrameLossMsgTargetMEPID
Description and OID
current
This object specifies the MEPID. This object should only be set if
wwpLeosCfmFrameLossMsgTargetMacAddr is not specified else an error is
returned.
read-create
1.3.6.1.4.1.6141.2.60.35.1.13.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-69
wwpLeosCfmFrameLossMsgTargetMacAddr
Description and OID
Status
Access
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.13.1.1.3
wwpLeosCfmFrameLossMsgCount
Description and OID
read-create
1.3.6.1.4.1.6141.2.60.35.1.13.1.1.4
wwpLeosCfmFrameLossMsgPriority
Description and OID
Status
Access
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.13.1.1.5
wwpLeosCfmFrameLossMsgRowStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, set this to 'destroy'.
If 'destroy' is used and either
TargetMacAddr or TargetMEPID is
specified, a cancel is done for any
repeating test on those items.
read-create
1.3.6.1.4.1.6141.2.60.35.1.13.1.1.6
wwpLeosCfmFrameLossMsgRepeat
Description and OID
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.35.1.13.1.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-70 WWP-LEOS-CFM-MIB
wwpLeosCfmFrameLossMsgRepeatCount
Description and OID
Status
Access
The repeat time in minutes for the Frame Loss Measurement test. If zero is
specified, the test runs continuously.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.13.1.1.8
wwpLeosCfmFrameLossMsgFlnThreshold
Description and OID
current
The fault threshold for the Frame Loss Measurement test. A value of -1
disables the generate of faults. A value of 0 or greateris compared to the frame
loss near result of the test and a fault is generated if the threshold is exceeded.
read-create
1.3.6.1.4.1.6141.2.60.35.1.13.1.1.9
wwpLeosCfmFrameLossMsgFlfThreshold
Description and OID
Status
Access
The fault threshold for the Frame Loss Measurement test. A value of -1
disables the generate of faults. A value of 0 or greater is compared to the
frame loss far result of the test and a fault is generated if the threshold is
exceeded.
current
read-create
Status
Access
The (conceptual) table listing the display parameters for the Remote MEP
CCM Loss table.
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.13.1.1.10
wwpLeosCfmRemoteMEPCCMLossTable
1.3.6.1.4.1.6141.2.60.35.1.14.1
wwpLeosCfmRemoteMEPCCMLossEntry
1.3.6.1.4.1.6141.2.60.35.1.14.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-71
wwpLeosCfmRemoteMEPCCMLossNum
Description and OID
Status
Access
This object is used as an index into the table and specifies the CCM Loss
bucket to be returned.
current
not-accessible
Status
Access
current
read-only
Status
Access
The (conceptual) table listing the display parameters for the CFM port stack
table.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This object is the index in the table and is used to show the VLAN.
current
read-only
Status
Access
This object is used as index in the table and specifies the port id.
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.14.1.1.1
wwpLeosCfmRemoteMEPCCMLossCount
1.3.6.1.4.1.6141.2.60.35.1.14.1.1.2
wwpLeosCfmExtPortStackTable
1.3.6.1.4.1.6141.2.60.35.1.15.1
wwpLeosCfmExtPortStackEntry
1.3.6.1.4.1.6141.2.60.35.1.15.1.1
wwpLeosCfmExtPortStackVid
1.3.6.1.4.1.6141.2.60.35.1.15.1.1.1
wwpLeosCfmExtPortStackPort
1.3.6.1.4.1.6141.2.60.35.1.15.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-72 WWP-LEOS-CFM-MIB
wwpLeosCfmExtPortStackType
Description and OID
Status
Access
This object is used as index in the table and is used to show the type of
Maintenance Point.
current
read-only
Status
Access
This object is used as index in the table and is used to show the level of stack. current
read-only
1.3.6.1.4.1.6141.2.60.35.1.15.1.1.3
wwpLeosCfmExtPortStackLevel
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.15.1.1.4
wwpLeosCfmExtPortStackMEPId
Description and OID
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.15.1.1.5
wwpLeosCfmServiceFrameBudgetTable
Description and OID
The (conceptual) table listing the config parameters for the CFM service frame current
budget table.
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.16.1
wwpLeosCfmServiceFrameBudgetEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.16.1.1
wwpLeosCfmSlotIndex
1.3.6.1.4.1.6141.2.60.35.1.16.1.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-73
wwpLeosCfmServiceFrameBudgetSlot
Description and OID
Status
Access
This object specifies the CFM frame budget for the slot for the given service.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.16.1.1.2
wwpLeosTceCfmMipTable
Description and OID
The (conceptual) table listing the config parameters for the CFM MIP Table. current
This table is not applicable if wwpLeosTceCfmServiceType is set to pbtTunnel.
Any Get/Set/Walk returns an error. Not applicable to 39xx/51xx platforms.
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.20.1.1
wwpLeosTceCfmMipEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1
wwpLeosTceCfmMipLiType
1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.1
wwpLeosTceCfmMipLiIndex
1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.2
wwpLeosTceCfmMipPgid
1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-74 WWP-LEOS-CFM-MIB
wwpLeosTceCfmMipBayIndex
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.4
wwpLeosTceCfmMipShelfIndex
1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.5
wwpLeosTceCfmMipModuleIndex
1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.6
wwpLeosTceCfmMipMacAddr
1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.7
wwpLeosTceCfmMipLevel
1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.8
wwpLeosTceCfmMipStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, set it to 'destroy'.
read-create
1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-75
wwpLeosTceCfmMipLiName
Description and OID
Status
Access
This object specifies the logical interface name associated with the Mip.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.10
wwpLeosTceCfmLoopbackMsgTable
Description and OID
The (conceptual) table listing the config parameters for the LoopbackMsg. The current
following attributes are required to create a LoopbackMsg: wwpLeosCfmServiceIndex -wwpLeosTceCfmLoopbackMsgSubPortIndex wwpLeosTceCfmLoopbackMsgTargetMEPID or wwpLeosTceCfmLoopbackMsgTargetMacAddr wwpLeosTceCfmLoopbackMsgCount -wwpLeosTceCfmLoopbackMsgData wwpLeosTceCfmLoopbackMsgPriority wwpLeosTceCfmLoopbackMsgRowStatus Not applicable to 39xx/51xx
platforms.
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.20.3.1
wwpLeosTceCfmLoopbackMsgEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1
wwpLeosTceCfmLoopbackMsgLocalMEPID
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.1
wwpLeosTceCfmLoopbackMsgTargetMEPID
Description and OID
current
This object specifies the MEPID. This object should only be set if
wwpLeosTceCfmLoopbackMsgTargetMacAddr is not specified else an error is
returned.
read-create
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-76 WWP-LEOS-CFM-MIB
wwpLeosTceCfmLoopbackMsgTargetMacAddr
Description and OID
Status
Access
current
read-create
Status
Access
This object specifies the LoopbackMsg count to be used when sending link
LoopbackMsg.
current
read-create
Status
Access
This object specifies the LoopbackMsg data to be used when sending link
LoopbackMsg.
current
read-create
Status
Access
This object specifies the LoopbackMsg priority to be used when sending link
LoopbackMsg.
current
read-create
Status
Access
This object specifies the Service used when sending link LoopbackMsg.
current
read-only
Status
Access
This object specifies the sub-port used when sending link LoopbackMsg.
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.3
wwpLeosTceCfmLoopbackMsgCount
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.4
wwpLeosTceCfmLoopbackMsgData
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.5
wwpLeosTceCfmLoopbackMsgPriority
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.6
wwpLeosTceCfmLoopbackMsgServiceName
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.7
wwpLeosTceCfmLoopbackMsgSubPortName
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-77
wwpLeosTceCfmLoopbackMsgNextLbmTransId
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.9
wwpLeosTceCfmLoopbackMsgTotalTxLbm
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.10
wwpLeosTceCfmLoopbackMsgTotalRxLbrIo
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.11
wwpLeosTceCfmLoopbackMsgTotalRxLbrOoo
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.12
wwpLeosTceCfmLoopbackMsgRowStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To send a LoopbackMsg, set this object to 'createAndGo'. There is no concept
of delete a LoopbackMsg in this table.
read-create
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.13
wwpLeosTceCfmLoopbackMsgTotalRxLbrContentMismatch
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.14
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-78 WWP-LEOS-CFM-MIB
wwpLeosTceCfmLoopbackMsgTotalRxLbrUnexpected
Description and OID
Status
Access
current
read-only
Status
Access
The (conceptual) table listing the display parameters for the CFM port stack
table. Not applicable to 6.x
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.15
wwpLeosTceCfmPortStackTable
1.3.6.1.4.1.6141.2.60.35.1.20.5.1
wwpLeosTceCfmPortStackEntry
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1
wwpLeosTceCfmPortStackServiceType
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.1
wwpLeosTceCfmPortStackServiceIndex
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.2
wwpLeosTceCfmPortStackSubPortType
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-79
wwpLeosTceCfmPortStackSubPortIndex
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.4
wwpLeosTceCfmPortStackSubPortName
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.5
wwpLeosTceCfmPortStackOperState
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.6
wwpLeosTceCfmPortStackPgid
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.7
wwpLeosTceCfmPortStackBayIndex
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.8
wwpLeosTceCfmPortStackShelfIndex
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-80 WWP-LEOS-CFM-MIB
wwpLeosTceCfmPortStackModuleIndex
Description and OID
Status
Access
This object specifies the CFM sub-port agent slot. Index value of 255 is
reserved for Lag ports.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.10
wwpLeosTceCfmPortStackVsPbtName
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.11
wwpLeosTceCfmPortStackEgressXformTagValue1
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.13
wwpLeosTceCfmPortStackEgressXformTagPriority1
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.14
wwpLeosTceCfmPortStackEgressXformTagEtype1
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.15
wwpLeosTceCfmPortStackEgressXformTagValue2
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.16
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-81
wwpLeosTceCfmPortStackEgressXformTagPriority2
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The (conceptual) table listing the config parameters for the CFM MEP table.
Not applicable to 39xx/51xx
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.17
wwpLeosTceCfmPortStackEgressXformTagEtype2
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.18
wwpLeosTceCfmPortStackMepCount
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.19
wwpLeosTceCfmPortStackMipLevel
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.20
wwpLeosTceCfmMEPTable
1.3.6.1.4.1.6141.2.60.35.1.20.7.1
wwpLeosTceCfmMEPEntry
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-82 WWP-LEOS-CFM-MIB
wwpLeosTceCfmMEPId
Description and OID
Status
This is used as the index in the table. This object specifies the mep id for the current
given service.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.1
wwpLeosTceCfmMEPAdminState
Description and OID
Status
Access
current
read-write
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.2
wwpLeosTceCfmMEPOperState
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.3
wwpLeosTceCfmMEPDirection
Description and OID
This object specifies the MEP direction of the service. This object can only be current
set if wwpLeosCfmServiceIndex is of type vlan.
read-create
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.4
wwpLeosTceCfmMEPCCMState
Description and OID
Status
Access
This object specifies the CCM transmission for the service specified by
wwpLeosCfmServiceType.
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.5
wwpLeosTceCfmMEPCCMPriority
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-83
wwpLeosTceCfmMEPLTMPriority
Description and OID
Status
Access
This object specifies the priority received on the given service and port.
current
read-write
Status
Access
This object specifies the MAC address received on the given service and port.. current
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.7
wwpLeosTceCfmMEPMacAddr
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.8
wwpLeosTceCfmMEPNextLbmSeqNumber
Description and OID
Status
Access
This object specifies the next LBM sequence number received on the given
service and port.
current
read-only
Status
Access
This object specifies the total valid in order loopback replies received on the
given service and port.
current
read-only
Status
Access
This object specifies the total valid out of order loopback replies received on
the given service and port.
current
read-only
Status
Access
This object specifies the next LTM sequence number received on the given
service and port.
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.9
wwpLeosTceCfmMEPRxValidInOrderLoopbackReply
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.10
wwpLeosTceCfmMEPRxValidOutOrderLoopbackReply
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.11
wwpLeosTceCfmMEPNextLTMSeqNumber
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-84 WWP-LEOS-CFM-MIB
wwpLeosTceCfmMEPNumLoopbackRepliesTxmt
Description and OID
Status
Access
This object specifies the flags total loopback replies transmitted on the given
service and port.
current
read-only
Status
Access
This object specifies the total LTM messages received on the given service
and port.
current
read-only
Status
Access
This object specifies the total LTM transmitted on the given service and port. current
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.13
wwpLeosTceCfmMEPNumLTMRecevied
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.14
wwpLeosTceCfmMEPNumLTMTxmt
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.15
wwpLeosTceCfmMEPNumCCMTxmt
Description and OID
Status
Access
This object specifies the total CCM messages transmitted on the given service current
and port.
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.16
wwpLeosTceCfmMEPRowStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, set this to 'destroy'.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.17
wwpLeosTceCfmMEPNumDMMSent
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.18
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-85
wwpLeosTceCfmMEPDMMDelay
Description and OID
Status
Access
This object specifies the average delay in microseconds measured during the current
last DMM performance test on the given service and port.
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.19
wwpLeosTceCfmMEPDMMJitter
Description and OID
Status
Access
This object specifies the average jitter in microseconds measured during the
last DMM performance test on the given service and port.
current
read-only
Status
Access
This object specifies the total frame loss measurement messages transmitted current
on the given service and port.
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.20
wwpLeosTceCfmMEPNumLMMSent
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.21
wwpLeosTceCfmMEPLMMFrameLossNear
Description and OID
Status
Access
This object specifies the number of lost frames on the near side measured
during the last LMM performance test on the given service and port.
current
read-only
Status
Access
This object specifies the number of lost frames on the far side measured during current
the last LMM performance test on the given service and port.
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.22
wwpLeosTceCfmMEPLMMFrameLossFar
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.23
wwpLeosTceCfmMEPLiType
Description and OID
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.24
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-86 WWP-LEOS-CFM-MIB
wwpLeosTceCfmMEPLiIndex
Description and OID
Status
Access
current
read-create
Status
Access
current
read-only
Status
Access
This object represents the sub-port, PbtService or Mpls Vc name assigned to current
the given service and port.
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.25
wwpLeosTceCfmMEPServiceName
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.50
wwpLeosTceCfmMEPSubPortName
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.51
wwpLeosTceCfmMEPVsPbtName
Description and OID
Status
Access
This object represents the virtual switch or Pbt tunnel assigned to the given
service and port.
current
read-only
Status
Access
This object represents the logical port name assigned to the given service and current
port.
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.52
wwpLeosTceCfmMEPLogicalPortName
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.53
wwpLeosTceCfmMEPSubPortIndex
Description and OID
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.54
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-87
wwpLeosTceCfmMEPEncapsulation
Description and OID
Status
Access
This object specifies the encapsulation applied to the service and port.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
This object specifies the agent module the MEP is in. Index = 255 is reserved current
for Lag ports and this object cannot be set to 255 in this table.
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.55
wwpLeosTceCfmMEPLeadPortBayIndex
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.56
wwpLeosTceCfmMEPLeadPortShelfIndex
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.57
wwpLeosTceCfmMEPLeadPortModuleIndex
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.58
wwpLeosTceCfmMEPPBTBvid
Description and OID
Status
Access
This object specifies the BVID assigned to the given service and port.
current
read-only
Status
Access
This object specifies the E-type assigned to the given service and port.
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.59
wwpLeosTceCfmMEPPBTEtype
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.60
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-88 WWP-LEOS-CFM-MIB
wwpLeosTceCfmMEPNumLbmTxmt
Description and OID
Status
Access
This object specifies the total loopback messages transmitted on the given
service and port.
current
read-only
Status
Access
This object specifies the total loopback messages received on the given
service and port.
current
read-only
Status
Access
This object specifies the total loopback replies received on the given service current
and port.
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.61
wwpLeosTceCfmMEPNumLbmReceived
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.62
wwpLeosTceCfmMEPNumLoopbackRepliesReceived
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.63
wwpLeosTceCfmMEPNumLTRepliesTxmt
Description and OID
Status
Access
This object specifies the total link trace replies transmitted on the given service current
and port.
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.64
wwpLeosTceCfmMEPNumLTRepliesReceived
Description and OID
Status
Access
This object specifies the total link trace replies received on the given service current
and port.
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.65
wwpLeosTceCfmMEPNumUnexpectedLTRepliesReceived
Description and OID
Status
Access
This object specifies the total unexpected link trace replies received on the
given service and port.
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.66
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-89
wwpLeosTceCfmMEPNumCCMReceived
Description and OID
Status
Access
This object specifies the total CCM messages received on the given service
and port.
current
read-only
Status
Access
This object specifies the total content mismatch loopback replies received on current
the given service and port.
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.67
wwpLeosTceCfmMEPRxContentMismatchLoopbackReply
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.68
wwpLeosTceCfmMEPRxUnexpectedLoopbackReply
Description and OID
Status
Access
This object specifies the total unexpected loopback replies received on the
given service and port.
current
read-only
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.69
wwpLeosTceCfmDelayMsgTable
1.3.6.1.4.1.6141.2.60.35.1.20.12.1
wwpLeosTceCfmDelayMsgEntry
Description and OID
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-90 WWP-LEOS-CFM-MIB
wwpLeosTceCfmDelayMsgLocalMEPId
Description and OID
Status
Access
current
read-only
Status
Access
This object specifies the MEPID. This object should only be set if
wwpLeosTceCfmDelayMsgTargetMacAddr is not specified else an error is
returned.
current
read-create
Status
Access
This object specifies the MAC address to be used when sending link
LoopbackMsg. This object should only be set if
wwpLeosTceCfmDelayMsgTargetMEPID is not specified else an error is
returned.
current
read-create
Status
Access
current
read-create
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.1
wwpLeosTceCfmDelayMsgTargetMEPID
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.2
wwpLeosTceCfmDelayMsgTargetMacAddr
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.3
wwpLeosTceCfmDelayMsgCount
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.4
wwpLeosTceCfmDelayMsgPriority
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-91
wwpLeosTceCfmDelayMsgRowStatus
Description and OID
Status
Access
This object is a display read-only field only. A row in this table is created by the current
system when a service and mep are created.
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.6
wwpLeosTceCfmDelayMsgRepeatInterval
Description and OID
Status
Access
This object represents the transmission period for the CFM delay.
current
read-create
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-only
Status
Access
This object represents the sub-port name where the DelayMsg was sent.
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.40
wwpLeosTceCfmDelayMsgDelayThreshold
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.41
wwpLeosTceCfmDelayMsgJitterThreshold
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.42
wwpLeosTceCfmDelayMsgServiceName
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.43
wwpLeosTceCfmDelayMsgSubPortName
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.44
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-92 WWP-LEOS-CFM-MIB
wwpLeosTceCfmDelayMsgDelay
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.50
wwpLeosTceCfmDelayMsgJitter
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.51
wwpLeosTceCfmDelayMsgTotalTxDmm
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.52
wwpLeosTceCfmDelayMsgTotalRxDmm
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.53
wwpLeosTceCfmDelayMsgTotalTxDmr
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.54
wwpLeosTceCfmDelayMsgTotalRxDmr
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.55
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-93
wwpLeosTceCfmDelayMsgAction
Description and OID
Status
Access
This object represents the action for the message (send, clear or cancel)
current
read-create
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.56
wwpLeosTceCfmDelayMsgMaxDelay
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.57
wwpLeosTceCfmDelayMsgMaxJitter
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.58
wwpLeosTceCfmDelayMsgMaxDelayThreshold
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.59
wwpLeosTceCfmDelayMsgMaxJitterThreshold
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.60
wwpLeosTceCfmDelayMsgMinDelay
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.61
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-94 WWP-LEOS-CFM-MIB
wwpLeosTceCfmDelayMsgMinJitter
Description and OID
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.62
wwpLeosTceCfmFrameLossMsgTable
1.3.6.1.4.1.6141.2.60.35.1.20.13.1
wwpLeosTceCfmFrameLossMsgEntry
Description and OID
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1
wwpLeosTceCfmFrameLossMsgLocalMEPId
Description and OID
Status
Access
current
accessible-fornotify
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.1
wwpLeosTceCfmFrameLossMsgTargetMEPID
Description and OID
current
This object specifies the MEPID. This object should only be set if
wwpLeosTceCfmFrameLossMsgTargetMacAddr is not specified else an error
is returned.
read-create
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-95
wwpLeosTceCfmFrameLossMsgTargetMacAddr
Description and OID
Status
current
This object specifies the MacAddress to be used when sending link
LoopbackMsg. This object should only be set if
wwpLeosTceCfmFrameLossMsgTargetMEPID is not specified else an error is
returned.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.3
wwpLeosTceCfmFrameLossMsgCount
Description and OID
Status
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.4
wwpLeosTceCfmFrameLossMsgPriority
Description and OID
Status
Access
current
read-create
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.5
wwpLeosTceCfmFrameLossMsgRowStatus
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.6
wwpLeosTceCfmFrameLossMsgRepeatInterval
Description and OID
This object represents the Transmission Interval for the Frame loss messages current
read-create
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.50
wwpLeosTceCfmFrameLossMsgNearLossThreshold
Description and OID
Status
Access
This object represents the threshold value for the near-end frame loss
current
read-create
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.51
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-96 WWP-LEOS-CFM-MIB
wwpLeosTceCfmFrameLossMsgFarLossThreshold
Description and OID
Status
Access
This object represents the threshold value for the far-end frame loss
current
read-create
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
This object represents the near-end Frame Loss. For a MEP, near-end Frame current
loss refers to frame loss associated with the ingress data frames.
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.52
wwpLeosTceCfmFrameLossMsgServiceName
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.53
wwpLeosTceCfmFrameLossMsgSubPortName
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.54
wwpLeosTceCfmFrameLossMsgFrameLossNear
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.55
wwpLeosTceCfmFrameLossMsgFrameLossFar
Description and OID
Status
Access
This object represents the far-end Frame Loss. For a MEP, far-end Frame loss current
refers to frame loss associated with the egress data frames.
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.56
wwpLeosTceCfmFrameLossMsgTotalTxLmm
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.57
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-97
wwpLeosTceCfmFrameLossMsgTotalRxLmm
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
This object represents the action for the message (send, clear or cancel).
current
read-create
Status
Access
The (conceptual) table listing the display parameters for the MIP CCM Db
table. Not applicable to 6.x
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.58
wwpLeosTceCfmFrameLossMsgTotalTxLmr
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.59
wwpLeosTceCfmFrameLossMsgTotalRxLmr
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.60
wwpLeosTceCfmFrameLossMsgAction
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.61
wwpLeosTceCfmMipCCMDbTable
1.3.6.1.4.1.6141.2.60.35.1.20.14.1
wwpLeosTceCfmMipCCMDbEntry
1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-98 WWP-LEOS-CFM-MIB
wwpLeosTceCfmMipCCMDbIndex
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.1
wwpLeosTceCfmMipCCMDbMacAddr
1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.2
wwpLeosTceCfmMipCCMDbServiceName
1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.3
wwpLeosTceCfmMipCCMDbSubPortName
1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.4
wwpLeosTceCfmMipCCMdbNumCCMRx
1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.5
wwpLeosTceCfmMipCCMDbCCMRxTime
1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-99
wwpLeosTceCfmMipCCMDbLevel
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.7
wwpLeosTceCfmMipCCMDbMEPID
1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.8
wwpLeosTceCfmMipRDI
1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.9
wwpLeosTceCfmMipLastPortStatus
1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.10
wwpLeosCfmExtLoopbackMsgTable
Description and OID
current
The (conceptual) table listing the configuration parameters for the
LoopbackMsg. The following attributes are required to create a LoopbackMsg:
-wwpLeosCfmServiceIndex -wwpLeosCfmExtLoopbackMsgTargetMEPID or wwpLeosCfmExtLoopbackMsgTargetMacAddr wwpLeosCfmExtLoopbackMsgCount -wwpLeosCfmExtLoopbackMsgData wwpLeosCfmExtLoopbackMsgPriority -wwpLeosCfmExtLoopbackMsgAction
-wwpLeosCfmExtLoopbackMsgInterval wwpLeosCfmExtLoopbackMsgTimeout -wwpLeosCfmExtLoopbackMsgLoss
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.3.1
wwpLeosCfmExtLoopbackMsgEntry
Description and OID
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-100 WWP-LEOS-CFM-MIB
wwpLeosCfmExtLoopbackMsgLocalMEPID
Description and OID
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.1
wwpLeosCfmExtLoopbackMsgTargetMEPID
Description and OID
current
This object specifies the MEPID. This object should only be set if
wwpLeosCfmExtLoopbackMsgTargetMacAddr is not specified else an error is
returned.
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.2
wwpLeosCfmExtLoopbackMsgTargetMacAddr
Description and OID
Status
Access
This object specifies the MAC address to be used when sending link
LoopbackMsg. This object should only be set if
wwpLeosCfmExtLoopbackMsgTargetMEPID is not specified else an error is
returned.
current
read-create
Status
Access
This object specifies the LoopbackMsg count to be used when sending link
LoopbackMsg.
current
read-create
Status
Access
This object specifies the LoopbackMsg data to be used when sending link
LoopbackMsg.
current
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.3
wwpLeosCfmExtLoopbackMsgCount
1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.4
wwpLeosCfmExtLoopbackMsgData
1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-101
wwpLeosCfmExtLoopbackMsgPriority
Description and OID
Status
Access
This object specifies the LoopbackMsg priority to be used when sending link
LoopbackMsg.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.6
wwpLeosCfmExtLoopbackMsgAction
Description and OID
This object represents the action for the message (send, clear or cancel). If set current
to send(1) and if wwpLeosCfmExtLoopbackMsgTargetMacAddr is specified
then loopbackMsg is sent to remote MAC. If set to send(1) and if
wwpLeosCfmExtLoopbackMsgTargetMEPID is specified then loopbackMsg is
sent to remote mepid. If set to clear(2) clears mep statistics for given service
and mepid. If set to cancel(3) returns commit_failed_error.
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.7
wwpLeosCfmExtLoopbackMsgInterval
Description and OID
Status
This object specifies the LoopbackMsg interval to be used when sending link current
LoopbackMsg.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.8
wwpLeosCfmExtLoopbackMsgTimeout
Description and OID
Status
This object specifies the LoopbackMsg timeout to be used when sending link current
LoopbackMsg.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.9
wwpLeosCfmExtLoopbackMsgLoss
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-102 WWP-LEOS-CFM-MIB
wwpLeosCfmExtMEPTable
Description and OID
Status
The (conceptual) table listing the configuration parameters for the CFM MEP current
table. To create entry in this table use SNMP multiple set operation. wwpLeosCfmExtPortId must be specified. -wwpLeosCfmExtVlanId must be
specified. -wwpLeosCfmExtMEPRowStatus must be set to 'CreateAndGo'
Access
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.7.1
wwpLeosCfmExtMEPEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1
wwpLeosCfmExtMEPId
Description and OID
This is used as the index in the table. This object specifies the MEP id for the current
given service.
accessible-fornotify
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.1
wwpLeosCfmExtPortId
Description and OID
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.2
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.3
current
read-create
Status
Access
current
read-write
wwpLeosCfmExtVlanId
wwpLeosCfmExtMEPAdminState
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-103
wwpLeosCfmExtMEPOperState
Description and OID
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.5
wwpLeosCfmExtMEPDirection
Description and OID
This object specifies the MEP direction of the service. This object can only be current
set if wwpLeosCfmServiceIndex is of type VLAN.
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.6
wwpLeosCfmExtMEPCCMState
Description and OID
Status
Access
This object specifies the CCM transmission for the service specified by
wwpLeosCfmServiceType.
current
read-write
Status
Access
current
read-write
Status
Access
This object specifies the priority received on the given service and MEP.
current
read-write
Status
Access
This object specifies the MAC address received on the given service and MEP. current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.7
wwpLeosCfmExtMEPCCMPriority
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.8
wwpLeosCfmExtMEPLTMPriority
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.9
wwpLeosCfmExtMEPMacAddr
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-104 WWP-LEOS-CFM-MIB
wwpLeosCfmExtMEPNextLbmSeqNumber
Description and OID
Status
Access
This object specifies the next lbm sequence number received on the given
service and MEP.
current
read-only
Status
Access
This object specifies the next LTM sequence number received on the given
service and MEP.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.11
wwpLeosCfmExtMEPNextLTMSeqNumber
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.12
wwpLeosCfmExtMEPRowStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, set this to 'destroy'.
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.13
wwpLeosCfmExtMEPDMMDelay
Description and OID
Status
Access
This object specifies the average delay in microseconds measured during the current
last DMM performance test on the given service and MEP.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.14
wwpLeosCfmExtMEPDMMJitter
Description and OID
Status
Access
This object specifies the average jitter in microseconds measured during the
last DMM performance test on the given service and MEP.
current
read-only
Status
Access
This object specifies the number of lost frames on the near side measured
during the last LMM performance test on the given service and MEP.
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.15
wwpLeosCfmExtMEPLMMFrameLossNear
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.16
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-105
wwpLeosCfmExtMEPLMMFrameLossFar
Description and OID
Status
Access
This object specifies the number of lost frames on the far side measured during current
the last LMM performance test on the given service and MEP.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.17
wwpLeosCfmExtMEPServiceName
Description and OID
Status
Access
current
read-only
Status
Access
This object specifies the interface name associated with this MEP.
current
read-only
Status
Access
This object specifies the service instance name associated with this MEP.
current
read-only
Status
Access
This object specifies the logical port name associated with this MEP.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.50
wwpLeosCfmExtMEPInterfaceName
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.51
wwpLeosCfmExtMEPServiceInstanceName
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.52
wwpLeosCfmExtMEPLogicalPortName
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.53
wwpLeosCfmExtMEPTagMode
Description and OID
This object specifies the tag-mode for the given mep and service. When on(1) current
the MEP originates all frames with an additional inner-most tag. On a down
MEP this is the CVLAN tag.
read-write
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.54
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-106 WWP-LEOS-CFM-MIB
wwpLeosCfmExtMEPTagVID
Description and OID
Status
This object specifies the VLAN ID for the additional tag given mep and service. current
Access
read-write
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.55
wwpLeosCfmExtMEPTagPriority
Description and OID
Status
Access
current
read-write
Status
Access
This object specifes the number of frames with bad sequence numbers
measured during the last LMM performance test on the given service and
MEP.
current
read-only
Status
Access
This object allows the user to set the MEP CCM comment.
current
read-create
Status
Access
This object specifies the number of frames with missing sequence numbers
measured during the last LMM performance test on the given service and
MEP.
current
read-only
Status
Access
This object specifies the number of frames seen in the current sample window. current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.56
wwpLeosCfmExtMEPLMMBadSequence
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.57
wwpLeosCfmExtMEPCCMComment
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.58
wwpLeosCfmExtMEPLMMMissingSequence
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.59
wwpLeosCfmExtMEPBlockOppositeFaultCurrent
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.60
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-107
wwpLeosCfmExtMEPBlockOppositeFaultThreshold
Description and OID
Status
This object specifies the number of frames to block before generating a fault. current
Access
read-write
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.61
wwpLeosCfmExtMEPBlockOppositeFaultTime
Description and OID
Status
Access
current
read-write
Status
Access
This object specifies the minimum delay in microseconds measured during the current
last DMM performance test on the given service and MEP.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.62
wwpLeosCfmExtMEPDMMMinDelay
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.63
wwpLeosCfmExtMEPDMMMaxDelay
Description and OID
Status
Access
current
read-only
Status
Access
This object specifies the minimum jitter in microseconds measured during the current
last DMM performance test on the given service and MEP.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.64
wwpLeosCfmExtMEPDMMMinJitter
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.65
wwpLeosCfmExtMEPDMMMaxJitter
Description and OID
Status
Access
This object specifies the maximum jitter in microseconds measured during the current
last DMM performance test on the given service and MEP.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.66
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-108 WWP-LEOS-CFM-MIB
wwpLeosCfmExtMEPAccelerated
Description and OID
Status
Access
current
read-only
Status
Access
This object specifies the number of lost frames on the near side measured
during the last SLM performance test on the given service and MEP.
current
read-only
Status
Access
This object specifies the number of lost frames on the far side measured during current
the last SLM performance test on the given service and MEP.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.67
wwpLeosCfmExtMEPSLMFrameLossNear
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.68
wwpLeosCfmExtMEPSLMFrameLossFar
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.69
wwpLeosCfmExtMEPStatsTable
Description and OID
Status
The (conceptual) table listing the configuration parameters for the CFM MEP current
table.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.7.2
wwpLeosCfmExtMEPStatsEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1
wwpLeosCfmExtMEPStatsTotalValidFramesReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-109
wwpLeosCfmExtMEPStatsTotalInvalidFramesReceived
Description and OID
Status
Access
current
read-only
Status
Access
This object specifies the total invalid message overflow frames received
current
read-only
Status
Access
This object specifies the total invalid port status TLVs received.
current
read-only
Status
Access
This object specifies the total invalid interface status TLVs received.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.2
wwpLeosCfmExtMEPStatsTotalInvalidMessageOverflowReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.3
wwpLeosCfmExtMEPStatsInvalidPortStatusTLVReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.4
wwpLeosCfmExtMEPStatsInvalidInterfaceStatusTLVReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.5
wwpLeosCfmExtMEPStatsInvalidSenderIDTLVReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.6
wwpLeosCfmExtMEPStatsCCMTxmt
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-110 WWP-LEOS-CFM-MIB
wwpLeosCfmExtMEPStatsValidCCMReceived
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
This object specifies the interval error for the CCM received.
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.8
wwpLeosCfmExtMEPStatsCCMInSequenceReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.9
wwpLeosCfmExtMEPStatsCCMSequenceErrorsReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.10
wwpLeosCfmExtMEPStatsMDLevelXconCCMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.11
wwpLeosCfmExtMEPStatsMAIDXconCCMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.12
wwpLeosCfmExtMEPStatsIntervalErrorCCMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.13
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-111
wwpLeosCfmExtMEPStatsRxInvalidCCM
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.14
wwpLeosCfmExtMEPStatsLBMTxmt
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.15
wwpLeosCfmExtMEPStatsLBRTxmt
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.16
wwpLeosCfmExtMEPStatsInOrderLBRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.17
wwpLeosCfmExtMEPStatsOutOfOrderLBRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.18
wwpLeosCfmExtMEPStatsContentMismatchLBRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.19
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-112 WWP-LEOS-CFM-MIB
wwpLeosCfmExtMEPStatsUnexpectedLBRReceived
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.20
wwpLeosCfmExtMEPStatsInvalidLBRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.21
wwpLeosCfmExtMEPStatsLTMTxmt
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.22
wwpLeosCfmExtMEPStatsValidLTMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.23
wwpLeosCfmExtMEPStatsTotalInvalidLTMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.24
wwpLeosCfmExtMEPStatsInvalidLTRAction
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.25
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-113
wwpLeosCfmExtMEPStatsLTRTxmt
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.26
wwpLeosCfmExtMEPStatsLTRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.27
wwpLeosCfmExtMEPStatsDMMTxmt
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.28
wwpLeosCfmExtMEPStatsDMMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.29
wwpLeosCfmExtMEPStatsDMRTxmt
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.30
wwpLeosCfmExtMEPStatsDMRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.31
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-114 WWP-LEOS-CFM-MIB
wwpLeosCfmExtMEPStatsDMReplyTimeout
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.32
wwpLeosCfmExtMEPStatsLMMTxmt
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.33
wwpLeosCfmExtMEPStatsLMMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.34
wwpLeosCfmExtMEPStatsLMRTxmt
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.35
wwpLeosCfmExtMEPStatsLMRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.36
wwpLeosCfmExtMEPStatsLMRTimeout
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.37
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-115
wwpLeosCfmExtMEPStatsMepIdErrorCCMReceived
Description and OID
Status
Access
current
read-only
Status
Access
Setting this object to clear(1) clears MEP statistics for the given service and
MepId. This object cannot be set to none.
current
read-write
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.38
wwpLeosCfmExtMEPStatsClear
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.40
wwpLeosCfmExtMEPStatsValidLBMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.41
wwpLeosCfmExtMEPStatsInvalidLBMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.42
wwpLeosCfmExtMEPStatsUnexpectedLTRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.43
wwpLeosCfmExtMEPStatsInvalidDMMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.44
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-116 WWP-LEOS-CFM-MIB
wwpLeosCfmExtMEPStatsInvalidDMRReceived
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
This object specifies the total invalid frames blocked by opposite MEP.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.45
wwpLeosCfmExtMEPStatsUnexpectedDMRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.46
wwpLeosCfmExtMEPStatsInvalidLMMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.47
wwpLeosCfmExtMEPStatsInvalidLMRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.48
wwpLeosCfmExtMEPStatsInvalidBlockedOppositeMep
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.49
wwpLeosCfmExtMEPStatsSLMTxmt
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.50
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-117
wwpLeosCfmExtMEPStatsSLMReceived
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.51
wwpLeosCfmExtMEPStatsSLRTxmt
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.52
wwpLeosCfmExtMEPStatsSLRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.53
wwpLeosCfmExtMEPStatsSLRTimeout
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.54
wwpLeosCfmExtMEPLastStatsTable
Description and OID
The (conceptual) table listing the configuration parameters for the CFM MEP current
table.
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.7.3
wwpLeosCfmExtMEPLastStatsEntry
Description and OID
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-118 WWP-LEOS-CFM-MIB
wwpLeosCfmExtMEPLastStatsPriority
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.1
wwpLeosCfmExtMEPLastStatsLBMCount
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.2
wwpLeosCfmExtMEPLastStatsLBMSent
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.3
wwpLeosCfmExtMEPLastStatsLBMToSend
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.4
wwpLeosCfmExtMEPLastStatsInOrderLBRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.5
wwpLeosCfmExtMEPLastStatsOutOfOrderLBRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-119
wwpLeosCfmExtMEPLastStatsDMMPriority
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.7
wwpLeosCfmExtMEPLastStatsDMMTxmt
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.8
wwpLeosCfmExtMEPLastStatsDMMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.9
wwpLeosCfmExtMEPLastStatsDMMDelay
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.10
wwpLeosCfmExtMEPLastStatsDMMJitter
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.11
wwpLeosCfmExtMEPLastStatsLMMPriority
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-120 WWP-LEOS-CFM-MIB
wwpLeosCfmExtMEPLastStatsLMMTxtm
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.13
wwpLeosCfmExtMEPLastStatsLMMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.14
wwpLeosCfmExtMEPLastStatsFrameLossNear
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.15
wwpLeosCfmExtMEPLastStatsFrameLossFar
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.16
wwpLeosCfmExtMEPLastStatsLTMPriority
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.17
wwpLeosCfmExtMEPLastStatsLTMSequenceNo
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.18
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-121
wwpLeosCfmExtMEPLastStatsLTMInitialTTL
Description and OID
Status
Access
current
read-only
Status
Access
This object specifes the number of frames with bad sequence numbers
current
measured during the last LMM performance test on the given service and Mep.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.19
wwpLeosCfmExtMEPLastStatsFrameLossBadSequence
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.20
wwpLeosCfmExtMEPLastStatsDMMMinDelay
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.21
wwpLeosCfmExtMEPLastStatsDMMMaxDelay
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.22
wwpLeosCfmExtMEPLastStatsDMMMinJitter
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.23
wwpLeosCfmExtMEPLastStatsDMMMaxJitter
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.24
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-122 WWP-LEOS-CFM-MIB
wwpLeosCfmExtMEPClearStatistics
Description and OID
Status
Setting this object to clear(1), clears statistics for all Meps across all services, current
Access
read-write
1.3.6.1.4.1.6141.2.60.35.1.21.7.4
wwpLeosCfmExtMEPDelayHistoryTable
Description and OID
Status
The (conceptual) table listing the Y.1731 Delay History table for the CFM MEP. current
Access
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.7.5
wwpLeosCfmExtMEPDelayHistoryEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This object specifies the status of the test sent on the given service and MEP. current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1
wwpLeosCfmExtMEPDelayHistoryIndex
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.1
wwpLeosCfmExtMEPDelayHistoryStatus
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.2
wwpLeosCfmExtMEPDelayHistoryInterval
Description and OID
Status
Access
This object specifies the transmit rate of the Y.1731 DMM Frames sent on the current
given service and MEP.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-123
wwpLeosCfmExtMEPDelayHistoryPriority
Description and OID
Status
Access
This object specifies the priority of the Y.1731 DMM Frames sent on the given current
service and MEP.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.4
wwpLeosCfmExtMEPDelayHistoryMEPId
Description and OID
Status
Access
This object specifies the remote MEP id the test was ran against.
current
read-only
Status
Access
This object specifies the number of DMM frames sent on the given service and current
MEP.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.5
wwpLeosCfmExtMEPDelayHistoryNumDMMSent
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.6
wwpLeosCfmExtMEPDelayHistoryNumDMRReceived
Description and OID
Status
Access
This object specifies the number of DMR frames received on the given service current
and MEP.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.7
wwpLeosCfmExtMEPDelayHistoryMinDelay
Description and OID
Status
Access
This object specifies the minimum delay(microseconds) seen on DMR frames current
received on the given service and MEP.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.8
wwpLeosCfmExtMEPDelayHistoryAveDelay
Description and OID
Status
Access
This object specifies the average delay(microseconds) seen on DMR frames current
received on the given service and MEP.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-124 WWP-LEOS-CFM-MIB
wwpLeosCfmExtMEPDelayHistoryMaxDelay
Description and OID
Status
Access
This object specifies the maximum delay(microseconds) seen on DMR frames current
received on the given service and MEP.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.10
wwpLeosCfmExtMEPDelayHistoryMinJitter
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
This object specifies the maximum jitter(microseconds) seen on DMR frames current
received on the given service and MEP.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.11
wwpLeosCfmExtMEPDelayHistoryAveJitter
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.12
wwpLeosCfmExtMEPDelayHistoryMaxJitter
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.13
wwpLeosCfmExtMEPDelayHistoryStartTime
Description and OID
Status
Access
This object specifies the time the test began on the given service and MEP.
The timestamp is the number of seconds since 12AM Jan 1st, 1970
current
read-only
Status
Access
This object specifies the time the test terminated on the given service and
MEP. The timestamp is the number of seconds since 12AM Jan 1st, 1970.
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.14
wwpLeosCfmExtMEPDelayHistoryStopTime
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.15
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-125
wwpLeosCfmExtMEPDelayHistoryClear
Description and OID
Status
Access
Setting this object to clear(1) clears MEP delay history for the given service
and MepId. This object cannot be set to none.
current
read-write
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This object specifies the target MEPID. This object should only be set if
wwpLeosCfmLinkTraceMsgTargetMacAddr is not specified else an error is
returned.
current
read-create
Status
Access
This object specifies the target MAC address to be used when sending link
LinkMsg. This object should only be set if
wwpLeosCfmLinkTraceMsgTargetMEPID is not specified else an error is
returned.
current
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.16
wwpLeosCfmExtLinkTraceMsgTable
1.3.6.1.4.1.6141.2.60.35.1.21.8.1
wwpLeosCfmExtLinkTraceMsgEntry
1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1
wwpLeosCfmExtLinkTraceMsgLocalMepID
1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.1
wwpLeosCfmExtLinkTraceMsgTargetMEPID
1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.2
wwpLeosCfmExtLinkTraceMsgTargetMacAddr
1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.3
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-126 WWP-LEOS-CFM-MIB
wwpLeosCfmExtLinkTraceMsgTTL
Description and OID
Status
Access
current
read-create
Status
Access
current
read-only
Status
Access
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.4
wwpLeosCfmExtLinkTraceMsgSequenceNumber
1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.5
wwpLeosCfmExtLinkTraceMsgPriority
1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.6
wwpLeosCfmExtLinkTraceMsgAction
Description and OID
This object represents the action for the message (send, clear or cancel) If set current
to send(1) and if wwpLeosCfmExtLinkTraceMsgTargetMacAddr is specified
then LinkTraceMsg is sent to remote MAC. If set to send(1) and if
wwpLeosCfmExtLinkTraceMsgTargetMEPID is specified then LinktraceMsg is
sent to remote mepid. Setting to clear(2) clears mep statistics for given service
and mepid. Setting to cancel(3) returns commit_failed_error.
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.7
wwpLeosCfmExtLinkTraceMsgReplyTable
Description and OID
Status
Access
The (conceptual) table listing the display parameters for the LinkTrace Msg
Reply.
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.8.2
wwpLeosCfmExtLinkTraceMsgReplyEntry
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-127
wwpLeosCfmExtLinkTraceMsgReplyTTL
Description and OID
Status
Access
This object specifies the TTL of the received LinkTrace msg reply.
current
read-only
Status
Access
current
read-only
Status
Access
This object specifies the sequence number of the received LinkTrace msg
reply.
current
read-only
Status
Access
This object specifies the MAC address of the MP of the received LinkTrace
msg reply.
current
read-only
Status
Access
This object specifies the MEP ID of the received LinkTrace msg reply.
current
read-only
Status
Access
This object specifies the target MAC address of the received LinkTrace msg
reply.
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.1
wwpLeosCfmExtLinkTraceMsgReplyTTLIndex
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.2
wwpLeosCfmExtLinkTraceMsgReplySequenceNumber
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.3
wwpLeosCfmExtLinkTraceMsgReplyMPMacAddr
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.4
wwpLeosCfmExtLinkTraceMsgReplyMEPID
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.5
wwpLeosCfmExtLinkTraceMsgReplyTargetMacAddr
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-128 WWP-LEOS-CFM-MIB
wwpLeosCfmExtLinkTraceMsgReplyRelayAction
Description and OID
Status
Access
current
read-only
Status
Access
obsolete
read-only
Status
Access
current
read-only
Status
Access
obsolete
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.7
wwpLeosCfmExtLinkTraceMsgReplyIngressPort
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.8
wwpLeosCfmExtLinkTraceMsgReplyIngressAction
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.9
wwpLeosCfmExtLinkTraceMsgReplyEgressPort
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.10
wwpLeosCfmExtLinkTraceMsgReplyEgressAction
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.11
wwpLeosCfmExtLinkTraceMsgReplyIngressPortStr
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-129
wwpLeosCfmExtLinkTraceMsgReplyEgressPortStr
Description and OID
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.13
wwpLeosCfmExtDelayMsgTable
1.3.6.1.4.1.6141.2.60.35.1.21.12.1
wwpLeosCfmExtDelayMsgEntry
Description and OID
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1
wwpLeosCfmExtDelayMsgLocalMEPId
Description and OID
Status
Access
current
not-accessible
Status
Access
This object specifies the MEPID. This object should only be set if
wwpLeosCfmExtDelayMsgTargetMacAddr is not specified else an error is
returned.
current
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.1
wwpLeosCfmExtDelayMsgTargetMEPID
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-130 WWP-LEOS-CFM-MIB
wwpLeosCfmExtDelayMsgTargetMacAddr
Description and OID
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
This object specifies the repeat time in minutes for the Delay Measurement
test. If zero is specified, the test runs continuously.
current
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.3
wwpLeosCfmExtDelayMsgCount
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.4
wwpLeosCfmExtDelayMsgPriority
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.5
wwpLeosCfmExtDelayMsgRepeat
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.8
wwpLeosCfmExtDelayMsgRepeatCount
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-131
wwpLeosCfmExtDelayMsgDelayThreshold
Description and OID
Status
current
This object specifies represents the fault Threshold for the average delay,
specified in microseconds. A value of -1 disables the generatation of faults. A
value of 0 or greater is compared to the average delay result of the test and a
fault is generated if the threshold is exceeded.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.41
wwpLeosCfmExtDelayMsgJitterThreshold
Description and OID
Status
This object specifies represents the fault threshold value for the average Jitter, current
specified in microseconds. A value of -1 disables the generation of faults. A
value of 0 or greater is compared to the average jitter result of the test and a
fault is generated if the threshold is exceeded.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.42
wwpLeosCfmExtDelayMsgAction
Description and OID
Status
This object represents the action for the message (send, clear or cancel) If set current
to send(1) and if wwpLeosCfmExtDelayMsgTargetMacAddr is specified then
loopbackMsg is sent to remote MAC. If set to send(1) and if
wwpLeosCfmExtDelayMsgTargetMEPID is specified then loopbackMsg is
sent to remote mepid. Setting to clear(2) clears mep statistics for given service
and mepid. If set to cancel(3) and if wwpLeosCfmExtDelayMsgTargetMacAddr
is specified then it cancels sending Delay messages to remoteMac. If set to
cancel(3) and if wwpLeosCfmExtDelayMsgTargetMEPID is specified then it
cancels sending Delay messages to remoteMEPID.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.43
wwpLeosCfmExtDelayMsgMaxDelayThreshold
Description and OID
Status
Access
This object represents the threshold for the maximum Delay, specified in
microseconds. A value of -1 disables the generatation of faults. A value of 0
or greater is compared to the maximum delay result of the test and a fault is
generated if the threshold is exceeded.
current
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.44
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-132 WWP-LEOS-CFM-MIB
wwpLeosCfmExtDelayMsgMaxJitterThreshold
Description and OID
Status
This object represents the threshold value for the maximum Jitter, specified in current
microseconds. A value of -1 disables the generatation of faults. A value of 0
or greater is compared to the maximum jitter result of the test and a fault is
generated if the threshold is exceeded.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.45
wwpLeosCfmExtDelaySessionTable
Description and OID
Status
The (conceptual) table lists the configuration parameters for a DMM session. current
Access
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.12.2
wwpLeosCfmExtDelaySessionEntry
Description and OID
Status
current
An entry (conceptual row) in the wwpLeosCfmExtDelaySessionTable. To
send, clear or cancel the message, the corresponding MsgAction needs to be
specified. Individual objects in this table cannot be set.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.12.2.1
wwpLeosCfmExtDelaySessionTestId
Description and OID
Status
Access
This object specifies the DMM test ID to be used when sending DMM.
current
not-accessible
Status
Access
This object specifies the DMM priority to be used when sending DMM.
Recommended to set this object when performing SET operation.
current
read-write
1.3.6.1.4.1.6141.2.60.35.1.21.12.2.1.1
wwpLeosCfmExtDelaySessionPriority
1.3.6.1.4.1.6141.2.60.35.1.21.12.2.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-133
wwpLeosCfmExtDelaySessionCount
Description and OID
Status
Access
This object specifies the DMM count to be used when sending link
DelayMeasurementMsg. Counts between 2 and 65535 are valid. The system
default count is used if a value of 0 is entered.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.21.12.2.1.3
wwpLeosCfmExtDelaySessionDMMInterval
Description and OID
current
This object specifies the DMM transmission intervals. If set to Zero, CFM
global default interval setting is applied.
The values 1-7 represent indices
to CFM intervals as follows: 1 --> 3.33ms, 2 --> 10ms, 3 --> 100ms,
4 --> 1sec,
5 --> 10sec,
6 --> 1min,
7 --> 10min.
read-write
1.3.6.1.4.1.6141.2.60.35.1.21.12.2.1.4
wwpLeosCfmExtDelaySessionIterations
Description and OID
Status
current
This object specifies the number of iterations the test has to be conducted.
Each test iteration is defined by wwpLeosCfmExtDelaySessionDMMInterval,
wwpLeosCfmExtDelaySessionCount. Whereas, the test sessions is defined
by test iterations over wwpLeosCfmExtDelaySessionIterations. If this object
is set to zero, it means that test is continuous, and iterations are infinite.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.12.2.1.5
wwpLeosCfmExtDelaySessionRepeatDelay
Description and OID
Status
This object specifies the delay in minutes between consecutive test iterations. current
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.12.2.1.6
wwpLeosCfmExtDelaySessionFrameSize
Description and OID
Status
This object specifies the size in bytes of the CFM Base frame. If this object is current
set to zero, there is NO padding.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.12.2.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-134 WWP-LEOS-CFM-MIB
wwpLeosCfmExtDelaySessionTimeout
Description and OID
Status
current
This object specifies the timeout interval in milliseconds within which the
source should Rx a DMR for a corresponding DMM. If this object is set to zero,
the CFM global default setting is applied.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.12.2.1.8
wwpLeosCfmExtDelaySessionDuration
Description and OID
Status
Access
The duration of time each test iteration needs to run. If this object is set
wwpLeosCfmExtDelaySessionCount cannot be set.
current
read-create
Status
Access
This object represents the fault threshold for the average delay, specified in
microseconds. A value of -1 disables the generatation of faults. A value of 0
or greater is compared to the average delay result of the test and a fault is
generated if the threshold is exceeded.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.21.12.2.1.9
wwpLeosCfmExtDelaySessionDelayThreshold
1.3.6.1.4.1.6141.2.60.35.1.21.12.2.1.10
wwpLeosCfmExtDelaySessionJitterThreshold
Description and OID
This object represents the fault threshold value for the average Jitter, specified current
in microseconds. A value of -1 disables the generation of faults. A value of 0
or greater is compared to the average jitter result of the test and a fault is
generated if the threshold is exceeded.
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.12.2.1.11
wwpLeosCfmExtDelaySessionMaxDelayThreshold
Description and OID
Status
Access
This object represents the threshold for the maximum delay, specified in
microseconds. A value of -1 disables the generatation of faults. A value of 0
or greater is compared to the maximum delay result of the test and a fault is
generated if the threshold is exceeded.
current
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.12.2.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-135
wwpLeosCfmExtDelaySessionMaxJitterThreshold
Description and OID
Status
This object represents the threshold value for the maximum Jitter, specified in current
microseconds. A value of -1 disables the generatation of faults. A value of 0
or greater is compared to the maximum jitter result of the test and a fault is
generated if the threshold is exceeded.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.12.2.1.13
wwpLeosCfmExtDelaySessionAccelerated
Description and OID
Status
Access
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.21.12.2.1.14
wwpLeosCfmExtDelaySessionAction
Description and OID
current
This object represents the action for the message (send, clear, delete or
cancel) If set to send(1) DMM message is sent to remote mep represented by
wwpLeosCfmRemoteMEPID with the specific test id. Setting to clear(2) clears
mep statistics for given service and mepid. If set to cancel(3) test is cancelled
for this specific testid. If set to delete(4) test is deleted for this specific testid.
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.12.2.1.15
wwpLeosCfmExtDelaySessionNumDMMSent
Description and OID
Status
Access
This object specifies the number of DMM frames sent during the latest test
iteration for this session.
current
read-only
Status
Access
This object specifies the number of DMR frames received during the latest test current
iteration for this session.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.12.2.1.16
wwpLeosCfmExtDelaySessionNumDMRReceived
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.21.12.2.1.17
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-136 WWP-LEOS-CFM-MIB
wwpLeosCfmExtDelaySessionMinDelay
Description and OID
Status
Access
This object specifies the minimum delay(microseconds) seen on DMR frames current
received during the latest test iteration for this session.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.12.2.1.18
wwpLeosCfmExtDelaySessionAvgDelay
Description and OID
Status
Access
This object specifies the average delay(microseconds) seen on DMR frames current
received during the latest test iteration for this session.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.12.2.1.19
wwpLeosCfmExtDelaySessionMaxDelay
Description and OID
Status
Access
This object specifies the maximum delay(us) seen on DMR frames received
during the latest test iteration for this session.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
This object specifies the maximum jitter(microseconds) seen on DMR frames current
during the latest test iteration for this session.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.12.2.1.20
wwpLeosCfmExtDelaySessionMinJitter
1.3.6.1.4.1.6141.2.60.35.1.21.12.2.1.21
wwpLeosCfmExtDelaySessionAvgJitter
1.3.6.1.4.1.6141.2.60.35.1.21.12.2.1.22
wwpLeosCfmExtDelaySessionMaxJitter
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.21.12.2.1.23
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-137
wwpLeosCfmExtDelaySessionHistoryTable
Description and OID
Status
The (conceptual) table listing the Y.1731 Delay History table for the CFM MEP. current
Access
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.12.3
wwpLeosCfmExtDelaySessionHistoryEntry
Description and OID
Status
Access
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1
wwpLeosCfmExtDelaySessionHistoryIndex
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1.1
wwpLeosCfmExtDelaySessionHistoryServiceName
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1.2
wwpLeosCfmExtDelaySessionHistoryLocalMepid
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1.3
wwpLeosCfmExtDelaySessionHistoryLocalMacAddr
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-138 WWP-LEOS-CFM-MIB
wwpLeosCfmExtDelaySessionHistoryRemoteMEPId
Description and OID
Status
Access
This object identifies the remote mepid this test is run against.
current
read-only
Status
Access
current
read-only
Status
Access
This object specifies the DMM test id to be used when sending link DMM.
current
read-only
Status
Access
current
read-only
Status
Access
This object identifies the message priority of the Y.1731 DMM Frames sent on current
the given DMM test.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1.5
wwpLeosCfmExtDelaySessionHistoryRemoteMacAddr
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1.6
wwpLeosCfmExtDelaySessionHistoryTestId
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1.7
wwpLeosCfmExtDelaySessionHistoryAccelerate
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1.8
wwpLeosCfmExtDelaySessionHistoryPriority
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1.9
wwpLeosCfmExtDelaySessionHistoryIteration
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-139
wwpLeosCfmExtDelaySessionHistoryDMMInterval
Description and OID
Status
Access
This object identifies the DMM interval used to transmit the Y.1731 DMM
Frames sent in this test.
current
read-only
Status
Access
This object identifies the DMM interval used to transmit the Y.1731 DMM
Frames sent in this test.
current
read-only
Status
Access
This object specifies the number of DMM frames sent during the test iteration. current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1.11
wwpLeosCfmExtDelaySessionHistoryFrameSize
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1.12
wwpLeosCfmExtDelaySessionHistoryNumDMMSent
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1.13
wwpLeosCfmExtDelaySessionHistoryNumDMRReceived
Description and OID
Status
Access
This object specifies the number of DMR frames received during the test
iteration.
current
read-only
Status
Access
This object specifies the minimum delay(microseconds) seen on DMR frames current
received in the test iteration.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1.14
wwpLeosCfmExtDelaySessionHistoryMinDelay
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1.15
wwpLeosCfmExtDelaySessionHistoryAveDelay
Description and OID
Status
Access
This object specifies the average delay(microseconds) seen on DMR frames current
received in the test iteration.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1.16
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-140 WWP-LEOS-CFM-MIB
wwpLeosCfmExtDelaySessionHistoryMaxDelay
Description and OID
Status
Access
This object specifies the maximum delay(microseconds) seen on DMR frames current
received in the test iteration.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1.17
wwpLeosCfmExtDelaySessionHistoryMinJitter
Description and OID
Status
Access
current
read-only
Status
Access
This object specifies the average jitter(microseconds) seen on DMR frames in current
the test iteration.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1.18
wwpLeosCfmExtDelaySessionHistoryAveJitter
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1.19
wwpLeosCfmExtDelaySessionHistoryMaxJitter
Description and OID
Status
Access
This object specifies the maximum jitter(microseconds) seen on DMR frames current
in the test iteration.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1.20
wwpLeosCfmExtDelaySessionHistoryStartTime
Description and OID
Status
Access
The time the test iteration started .The timestamp is the number of seconds
since 12AM Jan 1st, 1970.
current
read-only
Status
Access
The time the test terminated .The timestamp is the number of seconds since
12AM Jan 1st, 1970.
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1.21
wwpLeosCfmExtDelaySessionHistoryStopTime
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1.22
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-141
wwpLeosCfmExtDelaySessionHistoryDuration
Description and OID
Status
Access
current
read-only
Status
Access
current
This object specifies the status of the test iteration. start - Test iteration
transitions to this state once the test is started and in progress. done - Test
iteration transitions to this state once the test is completed.
Transition
to this state happens only after receiving all the responses and the timeout
if any is completed. cancelled - Test iteration transitions to this state if the test
was interrupted while it was running.
Such an interruption can happen
if user explicitly cancels the test or cfm/service was disabled. timeout - Test
session transitions to this state when all the messages were transmitted and
has completed with errors. These
errors can occur when the delay
timeout has expired and not all responses were received.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1.23
wwpLeosCfmExtDelaySessionHistoryStatus
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1.24
wwpLeosCfmExtDelaySessionHistoryClear
Description and OID
Status
Access
Setting this object to clear(1), clears MEP delay history for the given service
and MepId. This object cannot be set to none.
current
read-write
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.12.3.1.25
wwpLeosCfmExtDelayResponderTable
1.3.6.1.4.1.6141.2.60.35.1.21.12.4
wwpLeosCfmExtDelayResponderEntry
1.3.6.1.4.1.6141.2.60.35.1.21.12.4.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-142 WWP-LEOS-CFM-MIB
wwpLeosCfmExtDelayResponderServiceName
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
This object identifies the remote mepid this test is run against.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.12.4.1.1
wwpLeosCfmExtDelayResponderLocalMepId
1.3.6.1.4.1.6141.2.60.35.1.21.12.4.1.2
wwpLeosCfmExtDelayResponderLocalMac
1.3.6.1.4.1.6141.2.60.35.1.21.12.4.1.3
wwpLeosCfmExtDelayResponderRemoteMepid
1.3.6.1.4.1.6141.2.60.35.1.21.12.4.1.4
wwpLeosCfmExtDelayResponderRemoteMac
1.3.6.1.4.1.6141.2.60.35.1.21.12.4.1.5
wwpLeosCfmExtDelayResponderAccelerated
1.3.6.1.4.1.6141.2.60.35.1.21.12.4.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-143
wwpLeosCfmExtDelayResponderNumDMMReceived
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.21.12.4.1.7
wwpLeosCfmExtDelayResponderNumDMRSent
1.3.6.1.4.1.6141.2.60.35.1.21.12.4.1.8
wwpLeosCfmExtFrameLossMsgTable
1.3.6.1.4.1.6141.2.60.35.1.21.13.1
wwpLeosCfmExtFrameLossMsgEntry
Description and OID
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1
wwpLeosCfmExtFrameLossMsgLocalMEPId
Description and OID
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-144 WWP-LEOS-CFM-MIB
wwpLeosCfmExtFrameLossMsgTargetMEPID
Description and OID
Status
current
This object specifies the MEPID. This object should only be set if
wwpLeosCfmExtFrameLossMsgTargetMacAddr is not specified else an error
is returned.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.2
wwpLeosCfmExtFrameLossMsgTargetMacAddr
Description and OID
Status
current
This object specifies the MAC address to be used when sending link
LoopbackMsg. This object should only be set if
wwpLeosCfmExtFrameLossMsgTargetMEPID is not specified else an error is
returned.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.3
wwpLeosCfmExtFrameLossMsgCount
Description and OID
Status
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.4
wwpLeosCfmExtFrameLossMsgPriority
Description and OID
Status
Access
current
read-create
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.5
wwpLeosCfmExtFrameLossMsgRepeat
1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-145
wwpLeosCfmExtFrameLossMsgRepeatCount
Description and OID
Status
Access
This object specifies the repeat time in minutes for the Frame Loss
Measurement test. If zero is specified, the test runs continuously.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.9
wwpLeosCfmExtFrameLossMsgFlnThreshold
Description and OID
current
The fault threshold for the Frame Loss Measurement test. A value of -1
disables the generate of faults. A value of 0 or greater iscompared to the frame
loss near result of the test and a fault is generated if the threshold is exceeded.
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.10
wwpLeosCfmExtFrameLossMsgFlfThreshold
Description and OID
Status
current
The fault threshold for the Frame Loss Measurement test. A value of -1
disables the generate of faults. A value of 0 or greater iscompared to the frame
loss far result of the test and a fault is generated if the threshold is exceeded.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.11
wwpLeosCfmExtFrameLossMsgAction
Description and OID
Status
This object represents the action for the message (send, clear or cancel) This current
object represents the action for the message (send, clear or cancel) If set to
send(1) and if wwpLeosCfmExtFrameLossMacAddr is specified then
FrameLoss is sent to remote MAC. If set to send(1) and if
wwpLeosCfmExtFrameLossMsgTargetMEPID is specified then
FrameLossMsg is sent to remote mepid. Setting to clear(2), clears the mep
statistics for given service and mepid. If set to cancel(3) and if
wwpLeosCfmExtFrameLossMsgTargetMacAddr is specified then it cancels
sending FrameLoss Messages to remoteMac. If set to cancel(3) and if
wwpLeosCfmExtFrameLossMsgTargetMEPID is specified then it cancels
sending FrameLoss messages to remoteMEPID.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-146 WWP-LEOS-CFM-MIB
wwpLeosCfmExtFrameLossMsgSeqThreshold
Description and OID
Status
The sequence threshold for the Frame Loss Measurement test. A value of -1 current
disables the generate of faults. A value of 0 or greater is compared to the frame
loss far result of the test and a fault is generated if the threshold is exceeded.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.13
wwpLeosCfmExtFrameLossSessionTable
Description and OID
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.21.13.2
wwpLeosCfmExtFrameLossSessionEntry
Description and OID
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.13.2.1
wwpLeosCfmExtFrameLossSessionTestId
Description and OID
Status
Access
This object specifies the LMM test id to be used when sending link
FrameLossMeasurementMsg.
current
not-accessible
Status
Access
This object specifies the LMM priority to be used when sending link
FrameLossMeasurementMsg. Recommended to set this object when
performing SET operation.
current
read-write
1.3.6.1.4.1.6141.2.60.35.1.21.13.2.1.1
wwpLeosCfmExtFrameLossSessionPriority
1.3.6.1.4.1.6141.2.60.35.1.21.13.2.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-147
wwpLeosCfmExtFrameLossSessionCount
Description and OID
Status
Access
This object specifies the LMM count to be used when sending link
FrameLossMeasurementMsg.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.21.13.2.1.3
wwpLeosCfmExtFrameLossSessionLMMInterval
Description and OID
This object specifies the LMM transmission intervals. If set to Zero, CFM global current
default interval setting is applied.
The values 1-7 represent indices to CFM
intervals as follows:
1 --> 3.33ms,
2 --> 10ms,
3 --> 100ms,
4
--> 1sec,
5 --> 10sec,
6 --> 1min,
7 --> 10min.
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.13.2.1.4
wwpLeosCfmExtFrameLossSessionIterations
Description and OID
Status
current
This object specifies the number of iterations the test has to be conducted.
Each test iteration is defined by
wwpLeosCfmExtFrameLossSessionLMMInterval,
wwpLeosCfmExtFrameLossSessionCount. Whereas, the test sessions is
defined by test iterations over
wwpLeosCfmExtFrameLossSessionRepeatDelay. If this object is set to zero,
it means that test is continuous, and iterations are infinite.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.13.2.1.5
wwpLeosCfmExtFrameLossSessionRepeatDelay
Description and OID
Status
This object specifies the delay in minutes between consecutive test iterations. current
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.13.2.1.6
wwpLeosCfmExtFrameLossSessionTimeout
Description and OID
Status
current
This object specifies the timeout interval in milliseconds within which the
source should Rx a LMR for a corresponding LMM Msg. If this object is set to
zero, the CFM global default setting is applied.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.13.2.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-148 WWP-LEOS-CFM-MIB
wwpLeosCfmExtFrameLossSessionFrameLossNearThreshold
Description and OID
Status
current
The fault threshold for the Frame Loss Measurement test. A value of -1
disables the generate of faults. A value of 0 or greater is compared to the frame
loss near result of the test and a fault is generated if the threshold is exceeded.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.13.2.1.8
wwpLeosCfmExtFrameLossSessionFrameLossFarThreshold
Description and OID
Status
current
The fault threshold for the Frame Loss Measurement test. A value of -1
disables the generate of faults. A value of 0 or greater is compared to the frame
loss far result of the test and a fault is generated if the threshold is exceeded.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.13.2.1.9
wwpLeosCfmExtFrameLossSessionSeqThreshold
Description and OID
Status
The sequence threshold for the Frame Loss Measurement test. A value of -1 current
disables the generate of faults. As value of 0 or greater is compared to the
frame loss far result of the test and a fault is generated if the threshold is
exceeded.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.13.2.1.10
wwpLeosCfmExtFrameLossSessionDuration
Description and OID
Status
Access
This object is used to set/read the duration of time the test took to complete
one iteration.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.21.13.2.1.11
wwpLeosCfmExtFrameLossSessionAccelerated
Description and OID
Setting this attribute to true gathers frame loss measurements in hardware. current
Recommended to set this object when performing SET operation. This object
is applicable on FPGA based platforms 3940,3960 and 5150.
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.13.2.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-149
wwpLeosCfmExtFrameLossSessionDataPriority
Description and OID
Status
Access
This object is used to set the data traffic priority. Recommended to set this
object when performingSET operation.
current
read-create
Status
Access
This object represents the action for the message (send, clear, delete or
cancel) If set to send(1) and if wwpLeosCfmRemoteMEPID is specified then
FrameLossMsg is sent to remote mepid. Setting to clear(2) clears mep
statistics for given service and mepid. If set to cancel(3) and if
wwpLeosCfmRemoteMEPID is specified then it cancels sending FrameLoss
messages to remoteMEPID. If set to delete(4) test is deleted for this specific
testid.
current
read-create
Status
Access
This object specifies the number of LMM sent in the latest test iteration.
current
read-only
Status
Access
This object specifies the number of LMR received in the latest test iteration.
current
read-only
Status
Access
This object specifies the near loss threshold in the latest test iteration.
current
read-only
Status
Access
This object specifies the far loss threshold in the latest test iteration.
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.13.2.1.13
wwpLeosCfmExtFrameLossSessionAction
1.3.6.1.4.1.6141.2.60.35.1.21.13.2.1.14
wwpLeosCfmExtFrameLossSessionNumLMMSent
1.3.6.1.4.1.6141.2.60.35.1.21.13.2.1.15
wwpLeosCfmExtFrameLossSessionNumLMRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.13.2.1.16
wwpLeosCfmExtFrameLossSessionFrameLossNear
1.3.6.1.4.1.6141.2.60.35.1.21.13.2.1.17
wwpLeosCfmExtFrameLossSessionFrameLossFar
1.3.6.1.4.1.6141.2.60.35.1.21.13.2.1.18
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-150 WWP-LEOS-CFM-MIB
wwpLeosCfmExtFrameLossSessionAvgFrameLossNear
Description and OID
Status
Access
This object specifies the average near loss threshold of the test session.
current
read-only
Status
Access
This object specifies the minimum Near Loss Threshold of the test session.
current
read-only
Status
Access
This object specifies the maximum Near Loss Threshold of the test session.
current
read-only
Status
Access
This object specifies the average Far Loss Thrsshold of the test session.
current
read-only
Status
Access
This object specifies the minimum Far Loss Threshold of the test session.
current
read-only
Status
Access
This object specifies the maximum Far Loss Threshold of the test session.
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.13.2.1.19
wwpLeosCfmExtFrameLossSessionMinFrameLossNear
1.3.6.1.4.1.6141.2.60.35.1.21.13.2.1.20
wwpLeosCfmExtFrameLossSessionMaxFrameLossNear
1.3.6.1.4.1.6141.2.60.35.1.21.13.2.1.21
wwpLeosCfmExtFrameLossSessionAvgFrameLossFar
1.3.6.1.4.1.6141.2.60.35.1.21.13.2.1.22
wwpLeosCfmExtFrameLossSessionMinFrameLossFar
1.3.6.1.4.1.6141.2.60.35.1.21.13.2.1.23
wwpLeosCfmExtFrameLossSessionMaxFrameLossFar
1.3.6.1.4.1.6141.2.60.35.1.21.13.2.1.24
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-151
wwpLeosCfmExtFrameLossSessionHistoryTable
Description and OID
Status
The (conceptual) table listing the Y.1731 frame loss History table for the CFM current
MEP.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.13.3
wwpLeosCfmExtFrameLossSessionHistoryEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1
wwpLeosCfmExtFrameLossSessionHistoryIndex
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.1
wwpLeosCfmExtFrameLossSessionHistoryServiceName
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.2
wwpLeosCfmExtFrameLossSessionHistoryLocalMepid
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.3
wwpLeosCfmExtFrameLossSessionHistoryLocalMacAddr
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-152 WWP-LEOS-CFM-MIB
wwpLeosCfmExtFrameLossSessionHistoryRemoteMEPId
Description and OID
Status
Access
This object identifies the remote mepid this test is run against.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
This object identifies the message priority of the Y.1731 LMM Frames sent on current
the given LMM test.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.5
wwpLeosCfmExtFrameLossSessionHistoryRemoteMacAddr
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.6
wwpLeosCfmExtFrameLossSessionHistoryTestId
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.7
wwpLeosCfmExtFrameLossSessionHistoryAccelerate
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.8
wwpLeosCfmExtFrameLossSessionHistoryPriority
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.9
wwpLeosCfmExtFrameLossSessionHistoryIteration
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-153
wwpLeosCfmExtFrameLossSessionHistoryLMMInterval
Description and OID
Status
Access
This object identifies the LMM interval used to transmit the Y.1731 LMM
Frames sent in this test.
current
read-only
Status
Access
This object specifies the number of LMM frames sent during the test iteration. current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.11
wwpLeosCfmExtFrameLossSessionHistoryNumLMMSent
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.12
wwpLeosCfmExtFrameLossSessionHistoryNumLMRReceived
Description and OID
Status
Access
This object specifies the number of LMR frames received during the test
iteration.
current
read-only
Status
Access
This object specifies the near loss result for this test iteration.
current
read-only
Status
Access
This object specifies the far loss result for this test iteration.
current
read-only
Status
Access
This object specifies the minimum frame loss near observed until this test
iteration.
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.13
wwpLeosCfmExtFrameLossSessionHistoryFrameLossNear
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.14
wwpLeosCfmExtFrameLossSessionHistoryFrameLossFar
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.15
wwpLeosCfmExtFrameLossSessionHistoryMinFrameLossNear
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.16
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-154 WWP-LEOS-CFM-MIB
wwpLeosCfmExtFrameLossSessionHistoryMaxFrameLossNear
Description and OID
Status
Access
This object specifies the maximum frame loss near observed until this test
iteration.
current
read-only
Status
Access
This object specifies the average frame loss near observed until this test
iteration.
current
read-only
Status
Access
This object specifies the minimum frame loss far observed until this test
iteration.
current
read-only
Status
Access
This object specifies the maximum frame loss far observed until this test
iteration.
current
read-only
Status
Access
This object specifies the average frame loss far observed until this test
iteration.
current
read-only
Status
Access
This object specifies the number of frames with bad sequence numbers
measured during the last LMM performance test on the given service and
MEP.
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.17
wwpLeosCfmExtFrameLossSessionHistoryAvgFrameLossNear
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.18
wwpLeosCfmExtFrameLossSessionHistoryMinFrameLossFar
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.19
wwpLeosCfmExtFrameLossSessionHistoryMaxFrameLossFar
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.20
wwpLeosCfmExtFrameLossSessionHistoryAvgFrameLossFar
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.21
wwpLeosCfmExtFrameLossSessionHistoryLMMBadSequence
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.22
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-155
wwpLeosCfmExtFrameLossSessionHistoryLMMMissedSequence
Description and OID
Status
Access
This object specifies the number of frames with missing sequence numbers
measured during the last LMM performance test iteration.
current
read-only
Status
Access
This object specifies the time the test iteration started. The timestamp is the
number of seconds since 12AM Jan 1st, 1970.
current
read-only
Status
Access
This object specifies the time the test terminated. The timestamp is the number current
of seconds since 12AM Jan 1st, 1970.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.23
wwpLeosCfmExtFrameLossSessionHistoryStartTime
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.24
wwpLeosCfmExtFrameLossSessionHistoryStopTime
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.25
wwpLeosCfmExtFrameLossSessionHistoryDuration
Description and OID
Status
Access
This object specifies the duration of time the test took to complete one iteration. current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.26
wwpLeosCfmExtFrameLossSessionHistoryStatus
Description and OID
Status
Access
current
This object specifies the status of the test iteration. start - Test iteration
transitions to this state once the test is started and in progress. done - Test
iteration transitions to this state once the test is completed.
Transition
to this state happens only after receiving all the responses and the timeout
if any is completed. cancelled - Test iteration transitions to this state if the test
was interrupted while it was running.
Such an interruption can happen
if user explicitly cancels the test or cfm/service was disabled. timeout - Test
session transitions to this state when all the messages were transmitted and
has completed with errors. These
errors can occur when the delay
timeout has expired and not all responses were received.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.27
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-156 WWP-LEOS-CFM-MIB
wwpLeosCfmExtFrameLossSessionHistoryClear
Description and OID
Status
Access
Setting this object to clear(1), clears MEP delay history for the given service
and MepId. This object cannot be set to none.
current
read-write
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.21.13.3.1.28
wwpLeosCfmExtFrameLossResponderTable
1.3.6.1.4.1.6141.2.60.35.1.21.13.4
wwpLeosCfmExtFrameLossResponderEntry
Description and OID
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.13.4.1
wwpLeosCfmExtFrameLossResponderServiceName
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.13.4.1.1
wwpLeosCfmExtFrameLossResponderLocalMepId
1.3.6.1.4.1.6141.2.60.35.1.21.13.4.1.2
wwpLeosCfmExtFrameLossResponderLocalMac
1.3.6.1.4.1.6141.2.60.35.1.21.13.4.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-157
wwpLeosCfmExtFrameLossResponderRemoteMepid
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
This object identifies the DOT1 Data priority of the data packet.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.13.4.1.4
wwpLeosCfmExtFrameLossResponderRemoteMac
1.3.6.1.4.1.6141.2.60.35.1.21.13.4.1.5
wwpLeosCfmExtFrameLossResponderTestId
1.3.6.1.4.1.6141.2.60.35.1.21.13.4.1.6
wwpLeosCfmExtFrameLossResponderDataPriority
1.3.6.1.4.1.6141.2.60.35.1.21.13.4.1.7
wwpLeosCfmExtFrameLossResponderAccelerated
1.3.6.1.4.1.6141.2.60.35.1.21.13.4.1.8
wwpLeosCfmExtFrameLossResponderNumLMMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.13.4.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-158 WWP-LEOS-CFM-MIB
wwpLeosCfmExtFrameLossResponderNumLMRSent
Description and OID
Status
Access
current
read-only
Status
Access
The (conceptual) table listing the display parameters for the CFM port stack
table.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.13.4.1.10
wwpLeosCfmExtInterfaceStackTable
1.3.6.1.4.1.6141.2.60.35.1.21.14.1
wwpLeosCfmExtInterfaceStackEntry
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1
wwpLeosCfmExtInterfaceStackServiceInstanceType
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.1
wwpLeosCfmExtInterfaceStackServiceInstanceIndex
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.2
wwpLeosCfmExtInterfaceStackInterfaceType
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-159
wwpLeosCfmExtInterfaceStackInterfaceIndex
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.4
wwpLeosCfmExtInterfaceStackLevel
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.5
wwpLeosCfmExtInterfaceStackStackType
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.6
wwpLeosCfmExtInterfaceStackInterfaceName
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.7
wwpLeosCfmExtInterfaceStackServiceInstanceName
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.8
wwpLeosCfmExtInterfaceStackPortName
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-160 WWP-LEOS-CFM-MIB
wwpLeosCfmExtInterfaceStackOperState
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The (conceptual) table listing the configuration parameters for the CFM Ext
MIP Table. This table is not applicable if wwpLeosCfmServiceType is set to
pbtTunnel. Any Get/Set/Walk returns an error.
current
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.10
wwpLeosCfmExtInterfaceStackVid
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.11
wwpLeosCfmExtInterfaceStackPgid
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.12
wwpLeosCfmExtInterfaceStackMEPId
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.13
wwpLeosCfmExtInterfaceStackMacAddress
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.14
wwpLeosCfmExtMipTable
1.3.6.1.4.1.6141.2.60.35.1.21.15.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-161
wwpLeosCfmExtMipEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
This object is used as index in the table and specifies the VLAN service type
for which intermediate maintenance points can be created.
current
not-accessible
Status
Access
This object is used as index in the table and specifies the port.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.21.15.1.1
wwpLeosCfmExtMipVid
1.3.6.1.4.1.6141.2.60.35.1.21.15.1.1.1
wwpLeosCfmExtMipPort
1.3.6.1.4.1.6141.2.60.35.1.21.15.1.1.2
wwpLeosCfmExtMipLevel
1.3.6.1.4.1.6141.2.60.35.1.21.15.1.1.3
wwpLeosCfmExtMipStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, set it to 'destroy'.
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.15.1.1.4
wwpLeosCfmExtInterfaceMipTable
Description and OID
Status
Access
The (conceptual) table listing the configuration parameters for the CFM Ext
MIP SI Table.
current
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.16.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-162 WWP-LEOS-CFM-MIB
wwpLeosCfmExtInterfaceMipEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This object specifies the service instance index. Interpretation of this object
depends on the value of wwpLeosCfmExtInterfaceMipServiceInstanceType.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This object specifies a sub interface index. When the value of object
wwpLeosCfmExtInterfaceMipInterfaceType is portVlan this obect refers to a
vlan.
current
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1
wwpLeosCfmExtInterfaceMipServiceInstanceType
1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.1
wwpLeosCfmExtInterfaceMipServiceInstanceIndex
1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.2
wwpLeosCfmExtInterfaceMipInterfaceType
1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.3
wwpLeosCfmExtInterfaceMipInterfaceIndex
1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.4
wwpLeosCfmExtInterfaceMipInterfaceSubIndex
1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.5
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-163
wwpLeosCfmExtInterfaceMipLevel
Description and OID
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.6
wwpLeosCfmExtInterfaceMipStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, set it to 'destroy'.
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.7
wwpLeosCfmExtOamPortTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.17.1
wwpLeosCfmExtOamPortEntry
1.3.6.1.4.1.6141.2.60.35.1.21.17.1.1
wwpLeosCfmExtOamPortIndex
1.3.6.1.4.1.6141.2.60.35.1.21.17.1.1.1
wwpLeosCfmExtOamPortSupported
1.3.6.1.4.1.6141.2.60.35.1.21.17.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-164 WWP-LEOS-CFM-MIB
wwpLeosCfmExtOamPortHwY1731DmmSupported
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.17.1.1.3
wwpLeosCfmExtOamPortHwY1731LmmSupported
1.3.6.1.4.1.6141.2.60.35.1.21.17.1.1.4
wwpLeosCfmExtSynLossSessionTable
1.3.6.1.4.1.6141.2.60.35.1.21.18.1
wwpLeosCfmExtSynLossSessionEntry
1.3.6.1.4.1.6141.2.60.35.1.21.18.1.1
wwpLeosCfmExtSynLossSessionTestId
1.3.6.1.4.1.6141.2.60.35.1.21.18.1.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-165
wwpLeosCfmExtSynLossSessionPriority
Description and OID
Status
Access
This object specifies the SLM Msg priority to be used when sending link
SyntheticLossMeasurementMsg.
current
read-create
Status
Access
This object specifies the SLM Msg count to be used when sending link
SyntheticLossMeasurementMsg. When this object is set to zero, the CFM
Global default is applied.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.21.18.1.1.2
wwpLeosCfmExtSynLossSessionCount
1.3.6.1.4.1.6141.2.60.35.1.21.18.1.1.3
wwpLeosCfmExtSynLossSessionSLMInterval
Description and OID
current
This object specifies the SLM Msg interval to be used when sending link
SyntheticLossMeasurementMsg. If set to Zero, CFM global default interval
setting is applied. The values 2-7 represent indices to CFM CCM intervals as
follows: 2 --> 10ms, 3 --> 100ms, 4 --> 1sec, 5 --> 10sec, 6 --> 1min, 7 -->
10min.
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.18.1.1.4
wwpLeosCfmExtSynLossSessionIterations
Description and OID
Status
current
This object specifies the number of iterations the test has to be conducted.
Each test iteration is defined by wwpLeosCfmExtSynLossMsgSLMInterval,
wwpLeosCfmExtSynLossMsgCount. Whereas, the test sessions is defined by
test iterations over wwpLeosCfmExtSynLossMsgRepeatCount. If this object is
set to zero, it means that test is continuous, and iterations are infinite.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.18.1.1.5
wwpLeosCfmExtSynLossSessionRepeatDelay
Description and OID
Status
This object specifies the delay in minutes between consecutive test iterations. current
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.18.1.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-166 WWP-LEOS-CFM-MIB
wwpLeosCfmExtSynLossSessionFrameSize
Description and OID
Status
This object specifies the size in bytes of the CFM Base frame. If this object is current
set to zero there is NO padding.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.18.1.1.7
wwpLeosCfmExtSynLossSessionTimeout
Description and OID
Status
current
This object specifies the timeout interval in milliseconds within which the
source should Rx a SLR for a corresponding SLM Msg. If this object is set to
zero, the CFM global default setting is applied.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.18.1.1.8
wwpLeosCfmExtSynLossSessionDuration
Description and OID
Status
Access
This object specifies the duration of time the test took in milliseconds to
complete one iteration.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.35.1.21.18.1.1.9
wwpLeosCfmExtSynLossSessionAction
Description and OID
This object represents the action for the message (send, clear or cancel) This current
object represents the action for the message (send, clear or cancel) If set to
send(1) and if wwpLeosCfmExtSynLossSessionTargetMEPID is specified
then FrameLossMsg is sent to remote mepid. Setting to clear(2) clears mep
statistics for given service and mepid. If set to cancel(3) and if
wwpLeosCfmExtSynLossSessionTargetMEPID is specified then it cancels
sending FrameLoss messages to remoteMEPID.
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.18.1.1.10
wwpLeosCfmExtSynLossSessionFlnThreshold
Description and OID
Status
current
This object represents the Near Loss Threshold Fault for the Frame Loss
Measurement test. A value of -1 disables the generation of faults. A value of
0 or greater is compared to the frame loss near result of the test and a fault is
generated if the threshold is exceeded.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.18.1.1.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-167
wwpLeosCfmExtSynLossSessionFlfThreshold
Description and OID
Status
current
This object represents the Far Loss Threshold Fault for the Frame Loss
Measurement test. A value of -1 disables the generation of faults. A value of 0
or greater is compared to the frame loss near result of the test and a fault is
generated if the threshold is exceeded.
Access
read-create
1.3.6.1.4.1.6141.2.60.35.1.21.18.1.1.12
wwpLeosCfmExtSynLossSessionNumSLMSent
Description and OID
Status
Access
This object specifies the number of SLM sent in the latest test iteration.
current
read-only
Status
Access
This object specifies the number of SLR received in the latest test iteration.
current
read-only
Status
Access
This object specifies the Near Loss Threshold in the latest test iteration.
current
read-only
Status
Access
This object specifies the Far Loss Threshold in the latest test iteration.
current
read-only
Status
Access
This object specifies the average Near Loss Threshold of the test session.
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.18.1.1.13
wwpLeosCfmExtSynLossSessionNumSLRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.18.1.1.14
wwpLeosCfmExtSynLossSessionFrameLossNear
1.3.6.1.4.1.6141.2.60.35.1.21.18.1.1.15
wwpLeosCfmExtSynLossSessionFrameLossFar
1.3.6.1.4.1.6141.2.60.35.1.21.18.1.1.16
wwpLeosCfmExtSynLossSessionAvgFrameLossNear
1.3.6.1.4.1.6141.2.60.35.1.21.18.1.1.17
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-168 WWP-LEOS-CFM-MIB
wwpLeosCfmExtSynLossSessionMinFrameLossNear
Description and OID
Status
Access
This object specifies the minimum Near Loss Threshold of the test session.
current
read-only
Status
Access
This object specifies the maximum Near Loss Threshold of the test session.
current
read-only
Status
Access
This object specifies the average Far Loss Thrsshold of the test session.
current
read-only
Status
Access
This object specifies the minimum Far Loss Threshold of the test session.
current
read-only
Status
Access
This object specifies the maximum Far Loss Threshold of the test session.
current
read-only
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.18.1.1.18
wwpLeosCfmExtSynLossSessionMaxFrameLossNear
1.3.6.1.4.1.6141.2.60.35.1.21.18.1.1.19
wwpLeosCfmExtSynLossSessionAvgFrameLossFar
1.3.6.1.4.1.6141.2.60.35.1.21.18.1.1.20
wwpLeosCfmExtSynLossSessionMinFrameLossFar
1.3.6.1.4.1.6141.2.60.35.1.21.18.1.1.21
wwpLeosCfmExtSynLossSessionMaxFrameLossFar
1.3.6.1.4.1.6141.2.60.35.1.21.18.1.1.22
wwpLeosCfmExtSynLossSessionHistoryTable
1.3.6.1.4.1.6141.2.60.35.1.21.18.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-169
wwpLeosCfmExtSynLossSessionHistoryEntry
Description and OID
Status
Access
not-accessible
1.3.6.1.4.1.6141.2.60.35.1.21.18.2.1
wwpLeosCfmExtSynLossSessionHistoryIndex
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.18.2.1.1
wwpLeosCfmExtSynLossSessionHistoryServiceName
1.3.6.1.4.1.6141.2.60.35.1.21.18.2.1.2
wwpLeosCfmExtSynLossSessionHistoryLocalMepid
1.3.6.1.4.1.6141.2.60.35.1.21.18.2.1.3
wwpLeosCfmExtSynLossSessionHistoryRemoteMepid
1.3.6.1.4.1.6141.2.60.35.1.21.18.2.1.4
wwpLeosCfmExtSynLossSessionHistoryTestId
1.3.6.1.4.1.6141.2.60.35.1.21.18.2.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-170 WWP-LEOS-CFM-MIB
wwpLeosCfmExtSynLossSessionHistoryPriority
Description and OID
Status
Access
This object specifies the SLM Msg priority to be used when sending link
SyntheticLossMeasurementMsg.
current
read-only
Status
Access
current
read-only
Status
Access
This object specifies the SLM Msg interval to be used when sending link
SyntheticLossMeasurementMsg.
current
read-only
Status
Access
This object specifies the size in bytes of the CFM Base frame.
current
read-only
Status
Access
This object specifies the number of SLM sent in this test iteration.
current
read-only
Status
Access
This object specifies the number of SLR received in this test iteration.
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.18.2.1.6
wwpLeosCfmExtSynLossSessionHistoryIteration
1.3.6.1.4.1.6141.2.60.35.1.21.18.2.1.7
wwpLeosCfmExtSynLossSessionHistorySLMInterval
1.3.6.1.4.1.6141.2.60.35.1.21.18.2.1.8
wwpLeosCfmExtSynLossSessionHistoryFrameSize
1.3.6.1.4.1.6141.2.60.35.1.21.18.2.1.9
wwpLeosCfmExtSynLossSessionHistoryNumSLMSent
1.3.6.1.4.1.6141.2.60.35.1.21.18.2.1.10
wwpLeosCfmExtSynLossSessionHistoryNumSLRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.18.2.1.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-171
wwpLeosCfmExtSynLossSessionHistoryFrameLossNear
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.18.2.1.12
wwpLeosCfmExtSynLossSessionHistoryFrameLossFar
1.3.6.1.4.1.6141.2.60.35.1.21.18.2.1.13
wwpLeosCfmExtSynLossSessionHistoryAvgFrameLossNear
1.3.6.1.4.1.6141.2.60.35.1.21.18.2.1.14
wwpLeosCfmExtSynLossSessionHistoryMinFrameLossNear
1.3.6.1.4.1.6141.2.60.35.1.21.18.2.1.15
wwpLeosCfmExtSynLossSessionHistoryMaxFrameLossNear
1.3.6.1.4.1.6141.2.60.35.1.21.18.2.1.16
wwpLeosCfmExtSynLossSessionHistoryAvgFrameLossFar
1.3.6.1.4.1.6141.2.60.35.1.21.18.2.1.17
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-172 WWP-LEOS-CFM-MIB
wwpLeosCfmExtSynLossSessionHistoryMinFrameLossFar
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
This object specifies the time the test iteration started. The timestamp is the
number of seconds since 12AM Jan 1st, 1970.
current
read-only
Status
Access
This object specifies the time the test terminated. The timestamp is the number current
of seconds since 12AM Jan 1st, 1970.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.18.2.1.18
wwpLeosCfmExtSynLossSessionHistoryMaxFrameLossFar
1.3.6.1.4.1.6141.2.60.35.1.21.18.2.1.19
wwpLeosCfmExtSynLossSessionHistoryStartTime
1.3.6.1.4.1.6141.2.60.35.1.21.18.2.1.20
wwpLeosCfmExtSynLossSessionHistoryStopTime
Description and OID
1.3.6.1.4.1.6141.2.60.35.1.21.18.2.1.21
wwpLeosCfmExtSynLossSessionHistoryDuration
Description and OID
Status
Access
This object specifies the duration of time the test took in milliseconds to
complete one iteration.
current
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.18.2.1.22
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-173
wwpLeosCfmExtSynLossSessionHistoryStatus
Description and OID
Status
Access
current
This object specifies the status of the test iteration. start - Test iteration
transitions to this state once the test is started and in progress. done - Test
iteration transitions to this state once the test is completed.
Transition
to this state happens only after receiving all the responses and the timeout
if any is completed. cancelled - Test iteration transitions to this state if the test
was interrupted while it was running.
Such an interruption can happen
if user explicitly cancels the test or cfm/service was disabled. timeout - Test
session transitions to this state when all the messages were transmitted and
has completed with errors. These
errors can occur when the delay
timeout has expired and not all responses were received.
read-only
1.3.6.1.4.1.6141.2.60.35.1.21.18.2.1.23
wwpLeosCfmExtSynLossSessionHistoryClear
Description and OID
Status
Setting this object to clear(1), clears MEP Synthetic Loss history for the given current
service and MepId. This object cannot be set to none.
Access
read-write
1.3.6.1.4.1.6141.2.60.35.1.21.18.2.1.24
wwpLeosCfmFaultTrap
A notification is sent whenever the fault is detected.
Object Identifier: 1.3.6.1.4.1.6141.2.60.35.2.0.1
Status: current
Supported Platforms: Not supported in SAOS 6.x
wwpLeosCfmPbtFaultTrap
A notification is sent whenever the fault is detected for a PBT tunnel.
wwpLeosCfmServiceType is always set to pbtTunnel.
Object Identifier: 1.3.6.1.4.1.6141.2.60.35.2.0.2
Status: deprecated
Supported Platforms: Not supported in SAOS 6.x
wwpLeosCfmDelayFaultTrap
A notification is sent whenever the fault is detected during a Delay
Measurement test with a fault threshold.
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-174 WWP-LEOS-CFM-MIB
wwpLeosCfmJitterFaultTrap
A notification is sent whenever the fault is detected during a Delay
Measurement test with a fault threshold.
Object Identifier: 1.3.6.1.4.1.6141.2.60.35.2.0.4
Status: current
Supported Platforms: Not supported in SAOS 6.x
wwpLeosCfmFrameLossNearFaultTrap
A notification is sent whenever the fault is detected during a Frame Loss
Measurement test with a fault threshold.
Object Identifier: 1.3.6.1.4.1.6141.2.60.35.2.0.5
Status: current
Supported Platforms: Not supported in SAOS 6.x
wwpLeosCfmFrameLossFarFaultTrap
A notification is sent whenever the fault is detected during a Frame Loss
Measurement test with a fault threshold.
Object Identifier: 1.3.6.1.4.1.6141.2.60.35.2.0.6
Status: current
Supported Platforms: Not supported in SAOS 6.x
wwpLeosCfmExtDelayFaultTrap
A notification is sent whenever the fault is detected during a Delay
Measurement test with a fault threshold.
Object Identifier: 1.3.6.1.4.1.6141.2.60.35.2.0.7
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-175
wwpLeosCfmExtJitterFaultTrap
A notification is sent whenever the fault is detected during a Delay
Measurement test with a fault threshold.
Object Identifier: 1.3.6.1.4.1.6141.2.60.35.2.0.8
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosCfmExtFrameLossNearFaultTrap
A notification is sent whenever the fault is detected during a Frame Loss
Measurement test with a fault threshold.
Object Identifier: 1.3.6.1.4.1.6141.2.60.35.2.0.9
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosCfmFaultTrapSet
A notification is sent whenever the fault is detected.
Object Identifier: 1.3.6.1.4.1.6141.2.60.35.2.0.10
Status: current
Supported Platforms: Not supported in SAOS 6.x
wwpLeosCfmFaultTrapClear
A notification is sent whenever the fault is resolved and cleared.
Object Identifier: 1.3.6.1.4.1.6141.2.60.35.2.0.11
Status: current
Supported Platforms: Not supported in SAOS 6.x
wwpLeosCfmDmmTrap
A notification is sent whenever delay average goes above delay-threshold
during a delay measurement test, also generated when delay average goes
below threshold after going up as a clearing event. Same notification is
generated whenever the average jitter goes above Jitter threshold during a
delay measurement test and when the maximum delay and jitter go above the
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-176 WWP-LEOS-CFM-MIB
maximum delay and jitter thresholds respectively. Also generated when jitter
average goes below jitter threshold after going up as a clearing event. When
jitter event is generated, wwpLeosTceCfmDelayMsgDelayThreshold and
wwpLeosTceCfmDelayMsgDelay varbind values are set to 0. Similarly when
max delay event is generated wwpLeosTceCfmDelayMsgMaxJitter and
wwpLeosTceCfmDelayMsgMaxJitterThreshold are set to 0 and vice versa
Object Identifier: 1.3.6.1.4.1.6141.2.60.35.2.0.12
Status: current
Supported Platforms: Not supported in SAOS 6.x
wwpLeosCfmLmmTrap
A notification is sent whenever FrameLoss Near average goes above
FrameLoss Near threshold during a Frame Loss measurement test. Also
generated when FrameLoss Near average goes below FrameLoss Near
threshold after going up as a clearing event. Same notification is generated
whenever FrameLoss Far Average goes above Frameloss Far threshold value
during a Frame Loss measurement test. Also generated when Frameloss Far
average goes below Frameloss Far threshold after going up as a clearing
event. When FrameLoss Near event is generated
wwpLeosTceCfmFrameLossMsgFrameLossFar and
wwpLeosTceCfmFrameLossMsgFarLossThreshold varbind values are 0
Object Identifier: 1.3.6.1.4.1.6141.2.60.35.2.0.13
Status: current
Supported Platforms: Not supported in SAOS 6.x
wwpLeosCfmExtFrameLossFarFaultTrap
A notification is sent whenever the fault is detected during a Frame Loss
Measurement test with a fault threshold.
Object Identifier: 1.3.6.1.4.1.6141.2.60.35.2.0.20
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosCfmExtFaultTrapSet
A notification is sent whenever the fault is detected.
Object Identifier: 1.3.6.1.4.1.6141.2.60.35.2.0.21
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CFM-MIB 26-177
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosCfmExtFaultTrapClear
A notification is sent whenever the fault is resolved and cleared.
Object Identifier: 1.3.6.1.4.1.6141.2.60.35.2.0.22
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosCfmBadSequenceFaultTrap
A notification is sent whenever wwpLeosCfmExtMEPLMMBadSequence
exceeds wwpLeosCfmExtFrameLossMsgSeqThreshold in a Frame Loss
Measurement test.
Object Identifier: 1.3.6.1.4.1.6141.2.60.35.2.0.23
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosCfmBlockOppositeMEPSetTrap
A notification sent whenever the number of frames blocked by the presence of
a MEP of the opposite type exceeds the threshold during the sample window.
Object Identifier: 1.3.6.1.4.1.6141.2.60.35.2.0.24
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosCfmBlockOppositeMEPClearTrap
A notification sent whenever the number of frames blocked by the presence of
a MEP of the opposite type drops below the threshold during the sample
window.
Object Identifier: 1.3.6.1.4.1.6141.2.60.35.2.0.25
Status: current
MIB Reference
009-3220-011 Standard Revision A
August 2013
26-178 WWP-LEOS-CFM-MIB
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosCfmExtSynLossSessionNearFaultTrap
A notification is sent whenever the fault is detected during a Synthetic Loss
Measurement test with a near loss threshold fault.
Object Identifier: 1.3.6.1.4.1.6141.2.60.35.2.0.26
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosCfmExtSynLossSessionFarFaultTrap
A notification is sent whenever the fault is detected during a Synthetic Loss
Measurement test with a far loss threshold fault.
Object Identifier: 1.3.6.1.4.1.6141.2.60.35.2.0.27
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
MIB Reference
009-3220-011 Standard Revision A
August 2013
27-1
WWP-LEOS-CHASSIS-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-CHASSIS-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosChassisRebootState
Description and OID
Status
Setting this to true causes the chassis to reboot only if software upgrade is not current
in progress.
Access
read-write
1.3.6.1.4.1.6141.2.60.11.1.1.1.1
wwpLeosChassisSystemTimeOffsetScope
Description and OID
Status
Access
current
read-only
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.11.1.1.1.2
wwpLeosChassisSystemTimeOffset
1.3.6.1.4.1.6141.2.60.11.1.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
27-2 WWP-LEOS-CHASSIS-MIB
wwpLeosChassisSerialConsoleState
Description and OID
Status
Access
This object specifies the current state of serial console. It can be set to
disabled/enabled.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.11.1.1.1.4
wwpLeosChassisShellInactivityTimerState
Description and OID
This object specifies if the device should close the shell sessions that are
current
inactive for a time period defined by wwpLeosChassisShellInactivityTimeout.
read-write
1.3.6.1.4.1.6141.2.60.11.1.1.1.5
wwpLeosChassisShellInactivityTimeout
Description and OID
Status
Access
This object specifies the idle time after which the device forcefully closes the
shell sessions if enabled (decided by
wwpLeosChassisShellInactivityTimerState).
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.11.1.1.1.6
wwpLeosChassisSerialConsoleDataBits
1.3.6.1.4.1.6141.2.60.11.1.1.1.8
wwpLeosChassisSerialConsoleParity
1.3.6.1.4.1.6141.2.60.11.1.1.1.12
wwpLeosChassisSerialConsoleStopBits
1.3.6.1.4.1.6141.2.60.11.1.1.1.13
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CHASSIS-MIB 27-3
wwpLeosChassisRebootNow
Description and OID
Status
Access
Setting this to true forces the device to reboot regardless of whether or not a
software upgrade is in progress.
current
read-write
Status
Access
This object specifies if the device should terminate a login session that has
been inactive for a time period decided by
wwpLeosChassisShellLoginTimeout.
current
read-write
Status
Access
This object specifies the idle time after which the device forcefully closes the
login session if enabled by wwpLeosChassisShellLoginTimerState.
current
read-write
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.11.1.1.1.14
wwpLeosChassisShellLoginTimerState
1.3.6.1.4.1.6141.2.60.11.1.1.1.15
wwpLeosChassisShellLoginTimeout
1.3.6.1.4.1.6141.2.60.11.1.1.1.16
wwpLeosChassisScheduledRebootTable
1.3.6.1.4.1.6141.2.60.11.1.1.1.17
wwpLeosChassisScheduledRebootEntry
1.3.6.1.4.1.6141.2.60.11.1.1.1.17.1
wwpLeosChassisScheduledRebootIndex
1.3.6.1.4.1.6141.2.60.11.1.1.1.17.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
27-4 WWP-LEOS-CHASSIS-MIB
wwpLeosChassisScheduledRebootTimestamp
Description and OID
Status
Access
The date and time of the reboot scheduled for this box.
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
Gets or sets the name of the current welcome banner file used after the CLI
Login.
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.11.1.1.1.17.1.2
wwpLeosChassisScheduledRebootActive
1.3.6.1.4.1.6141.2.60.11.1.1.1.17.1.3
wwpLeosChassisScheduledRebootNopost
1.3.6.1.4.1.6141.2.60.11.1.1.1.17.1.4
wwpLeosChassisScheduledRebootDelay
1.3.6.1.4.1.6141.2.60.11.1.1.1.17.1.5
wwpLeosChassisWelcomeBanner
1.3.6.1.4.1.6141.2.60.11.1.1.1.18
wwpLeosChassisResetWelcomeBanner
1.3.6.1.4.1.6141.2.60.11.1.1.1.19
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CHASSIS-MIB 27-5
wwpLeosChassisLoginBanner
Description and OID
Status
Access
Gets or sets the name of the current login banner file used before the CLI
Login.
current
read-write
Status
Access
current
read-write
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.1.20
wwpLeosChassisResetLoginBanner
1.3.6.1.4.1.6141.2.60.11.1.1.1.21
wwpLeosChassisMacAddress
1.3.6.1.4.1.6141.2.60.11.1.1.1.50
wwpLeosChassisDeviceId
1.3.6.1.4.1.6141.2.60.11.1.1.1.51
wwpLeosChassisSerialNumber
1.3.6.1.4.1.6141.2.60.11.1.1.1.52
wwpLeosChassisMfgDate
1.3.6.1.4.1.6141.2.60.11.1.1.1.53
MIB Reference
009-3220-011 Standard Revision A
August 2013
27-6 WWP-LEOS-CHASSIS-MIB
wwpLeosChassisParamVersion
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-write
Status
Access
Display the Post Results only when the Chassis Post State is enabled.
current
not-accessible
1.3.6.1.4.1.6141.2.60.11.1.1.1.54
wwpLeosChassisHardwareVersion
1.3.6.1.4.1.6141.2.60.11.1.1.1.55
wwpLeosChassisInnerDoorStatus
1.3.6.1.4.1.6141.2.60.11.1.1.1.56
wwpLeosChassisOuterDoorStatus
1.3.6.1.4.1.6141.2.60.11.1.1.1.57
wwpLeosChassisPostState
1.3.6.1.4.1.6141.2.60.11.1.1.1.60
wwpLeosChassisPostResultTable
1.3.6.1.4.1.6141.2.60.11.1.1.1.61
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CHASSIS-MIB 27-7
wwpLeosChassisPostResultEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
accessible-fornotify
Status
Access
current
accessible-fornotify
1.3.6.1.4.1.6141.2.60.11.1.1.1.61.1
wwpLeosChassisPostResultIndex
1.3.6.1.4.1.6141.2.60.11.1.1.1.61.1.1
wwpLeosChassisPostResultCode
1.3.6.1.4.1.6141.2.60.11.1.1.1.61.1.2
wwpLeosChassisPostResultMessage
1.3.6.1.4.1.6141.2.60.11.1.1.1.61.1.3
wwpLeosChassisExternalAlarmStatus
1.3.6.1.4.1.6141.2.60.11.1.1.1.62
wwpLeosChassisExternalAlarm
1.3.6.1.4.1.6141.2.60.11.1.1.1.63
MIB Reference
009-3220-011 Standard Revision A
August 2013
27-8 WWP-LEOS-CHASSIS-MIB
wwpLeosChassisDoorAlarmTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
accessible-fornotify
Status
Access
current
read-only
Status
Access
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.11.1.1.1.64
wwpLeosChassisDoorAlarmEntry
1.3.6.1.4.1.6141.2.60.11.1.1.1.64.1
wwpLeosChassisDoorAlarmIndex
1.3.6.1.4.1.6141.2.60.11.1.1.1.64.1.1
wwpLeosChassisDoorAlarmStatus
1.3.6.1.4.1.6141.2.60.11.1.1.1.64.1.2
wwpLeosChassisDoorAlarmAdminStatus
1.3.6.1.4.1.6141.2.60.11.1.1.1.64.1.3
wwpLeosChassisDoorAlarmFlapDetect
1.3.6.1.4.1.6141.2.60.11.1.1.1.64.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CHASSIS-MIB 27-9
wwpLeosChassisDoorAlarmFlapCount
Description and OID
Status
The number of events that must occur during the door flap detect time for door current
monitoring to be disabled.
Access
read-write
1.3.6.1.4.1.6141.2.60.11.1.1.1.64.1.5
wwpLeosChassisDoorAlarmFlapDetectTime
Description and OID
Status
Access
The amount of time in seconds during which the door flap count must be
reached for door monitoring to be disabled.
current
read-write
Status
Access
current
read-write
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.1.64.1.6
wwpLeosChassisDoorAlarmFlapHoldTime
1.3.6.1.4.1.6141.2.60.11.1.1.1.64.1.7
wwpLeosSystemPartNumber
1.3.6.1.4.1.6141.2.60.11.1.1.1.66
wwpLeosSystemSerialNumber
1.3.6.1.4.1.6141.2.60.11.1.1.1.67
wwpLeosSystemCleiCode
1.3.6.1.4.1.6141.2.60.11.1.1.1.68
MIB Reference
009-3220-011 Standard Revision A
August 2013
27-10 WWP-LEOS-CHASSIS-MIB
wwpLeosChassisBatteryStatus
Description and OID
Status
Access
Describes the current status of the battery. If battery is connected then the
status is indicated as 'present'.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The state name associated with the normal state of the battery.
current
read-write
Status
Access
The state name associated with the low state of the battery.
current
read-write
1.3.6.1.4.1.6141.2.60.11.1.1.2.1
wwpLeosChassisBatteryVoltageLevel
1.3.6.1.4.1.6141.2.60.11.1.1.2.2
wwpLeosChassisBatteryCondition
1.3.6.1.4.1.6141.2.60.11.1.1.2.3
wwpLeosChassisPowerSource
1.3.6.1.4.1.6141.2.60.11.1.1.2.4
wwpLeosChassisBatteryNormalStateName
1.3.6.1.4.1.6141.2.60.11.1.1.2.5
wwpLeosChassisBatteryLowStateName
1.3.6.1.4.1.6141.2.60.11.1.1.2.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CHASSIS-MIB 27-11
wwpLeosChassisBatteryGoodStateName
Description and OID
Status
Access
The state name associated with the good state of the battery.
current
read-write
Status
Access
The state name associated with the bad state of the battery.
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.11.1.1.2.7
wwpLeosChassisBatteryBadStateName
1.3.6.1.4.1.6141.2.60.11.1.1.2.8
wwpLeosChassisBatteryPresentStateName
1.3.6.1.4.1.6141.2.60.11.1.1.2.9
wwpLeosChassisBatteryMissingStateName
1.3.6.1.4.1.6141.2.60.11.1.1.2.10
wwpLeosChassisBatteryPowerPrimaryStateName
Description and OID
The state name associated with the state when the device is on primary power. current
read-write
1.3.6.1.4.1.6141.2.60.11.1.1.2.11
wwpLeosChassisBatteryPowerBatteryStateName
Description and OID
Status
The state name associated with the state when the device is on battery power. current
Access
read-write
1.3.6.1.4.1.6141.2.60.11.1.1.2.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
27-12 WWP-LEOS-CHASSIS-MIB
wwpLeosChassisBatteryLowStateNotifEnabled
Description and OID
Status
Access
read-write
1.3.6.1.4.1.6141.2.60.11.1.1.2.13
wwpLeosChassisBatteryBadStateNotifEnabled
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.11.1.1.2.14
wwpLeosChassisBatteryMissingStateNotifEnabled
1.3.6.1.4.1.6141.2.60.11.1.1.2.15
wwpLeosChassisBatteryPowerNotifEnabled
1.3.6.1.4.1.6141.2.60.11.1.1.2.16
wwpLeosChassisPowerTable
1.3.6.1.4.1.6141.2.60.11.1.1.3.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CHASSIS-MIB 27-13
wwpLeosChassisPowerEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.11.1.1.3.1.1
wwpLeosChassisPowerSupplyNum
1.3.6.1.4.1.6141.2.60.11.1.1.3.1.1.1
wwpLeosChassisPowerSupplyState
1.3.6.1.4.1.6141.2.60.11.1.1.3.1.1.2
wwpLeosChassisPowerSupplyType
1.3.6.1.4.1.6141.2.60.11.1.1.3.1.1.3
wwpLeosChassisPowerSupplyRedundantState
1.3.6.1.4.1.6141.2.60.11.1.1.3.1.1.4
wwpLeosChassisRedPowerSupplyNotifEnabled
1.3.6.1.4.1.6141.2.60.11.1.1.3.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
27-14 WWP-LEOS-CHASSIS-MIB
wwpLeosChassisFanModuleTable
Description and OID
Status
Access
current
not-accessible
Status
Access
An entry in the fan module Table providing objects for a fan module.
current
not-accessible
Status
Access
current
read-only
Status
Access
Denotes the fan modules type. 'fixed' means fan is fixed and cannot be
current
removed. 'hotswappable' means fan can be removed and inserted whenever
required. 'unequipped' means fan is not installed.
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.4.1
wwpLeosChassisFanModuleEntry
1.3.6.1.4.1.6141.2.60.11.1.1.4.1.1
wwpLeosChassisFanModuleNum
1.3.6.1.4.1.6141.2.60.11.1.1.4.1.1.1
wwpLeosChassisFanModuleType
Description and OID
1.3.6.1.4.1.6141.2.60.11.1.1.4.1.1.2
wwpLeosChassisFanModuleStatus
Description and OID
Status
Access
Denotes the fan modules status. 'ok' means fan is operational, 'pending'
current
means fan is installed but statistics are not yet available, 'failure' means fan is
not working.
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.4.1.1.3
wwpLeosChassisFanAvgSpeed
Description and OID
Status
Access
The fans average speed in RPM. The average is calculated on a continuous current
basis from system startup.
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.4.1.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CHASSIS-MIB 27-15
wwpLeosChassisFanCurrentSpeed
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-write
Status
Access
current
not-accessible
Status
Access
An entry in the Temp Sensor Table providing objects for a Temp Sensor.
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.4.1.1.5
wwpLeosChassisFanMinSpeed
1.3.6.1.4.1.6141.2.60.11.1.1.4.1.1.6
wwpLeosChassisFanModuleNotifEnabled
1.3.6.1.4.1.6141.2.60.11.1.1.4.2
wwpLeosChassisTempSensorTable
1.3.6.1.4.1.6141.2.60.11.1.1.5.1
wwpLeosChassisTempSensorEntry
1.3.6.1.4.1.6141.2.60.11.1.1.5.1.1
wwpLeosChassisTempSensorNum
1.3.6.1.4.1.6141.2.60.11.1.1.5.1.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
27-16 WWP-LEOS-CHASSIS-MIB
wwpLeosChassisTempSensorValue
Description and OID
Status
Access
current
read-only
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
The state indicates whether the current temp is greater than, equal to or less current
than the threshold state.
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.5.1.1.2
wwpLeosChassisTempSensorHighThreshold
1.3.6.1.4.1.6141.2.60.11.1.1.5.1.1.3
wwpLeosChassisTempSensorLowThreshold
1.3.6.1.4.1.6141.2.60.11.1.1.5.1.1.4
wwpLeosChassisTempSensorState
Description and OID
1.3.6.1.4.1.6141.2.60.11.1.1.5.1.1.5
wwpLeosChassisTempNotifEnabled
Description and OID
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.11.1.1.5.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CHASSIS-MIB 27-17
wwpLeosChassisTempHighThreshold
Description and OID
Status
This variable indicates the high temperature threshold to be used by the device current
when checking temperature of the device. This object is similar to
wwpLeosChassisTempSensorHighThreshold, the only difference being that
wwpLeosChassisTempHighThreshold is global attribute not per sensor based.
wwpLeosChassisTempSensorHighThreshold has the same value as
wwpLeosChassisTempHighThreshold at all times.
wwpLeosChassisTempSensorHighThreshold is basically redundant.
Access
read-write
1.3.6.1.4.1.6141.2.60.11.1.1.5.3
wwpLeosChassisTempLowThreshold
Description and OID
Status
This variable indicates the low temperature threshold to be used by the device current
when checking temperature of the device. This object is similar to
wwpLeosChassisTempSensorLowThreshold, the only difference is that
wwpLeosChassisTempLowThreshold is global attribute not per sensor based.
wwpLeosChassisTempSensorLowThreshold has the same value as
wwpLeosChassisTempLowThreshold at all times.
wwpLeosChassisTempSensorLowThreshold is basically redundant.
Access
read-write
1.3.6.1.4.1.6141.2.60.11.1.1.5.4
wwpPowerSwitchingOp
Description and OID
Status
Access
Notifies whether the input power supply is switching from AC to Battery or vice current
versa.
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.7.1
wwpLeosChassisPlatformCapsMaxPhysPorts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.8.1
wwpLeosChassisPlatformCapsMaxAggrPorts
1.3.6.1.4.1.6141.2.60.11.1.1.8.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
27-18 WWP-LEOS-CHASSIS-MIB
wwpLeosChassisPlatformCapsMaxVlans
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The maximum number of IGMP multicast groups supported on this machine. current
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.8.3
wwpLeosChassisPlatformCapsMaxIgmpSnoopVlans
1.3.6.1.4.1.6141.2.60.11.1.1.8.4
wwpLeosChassisPlatformCapsMaxMulticastgroups
Description and OID
1.3.6.1.4.1.6141.2.60.11.1.1.8.5
wwpLeosChassisPlatformCapsMaxRstpDomains
Description and OID
Status
Access
current
read-only
Status
Access
The maximum number of transport tunnels supported on this machine in non- current
native mode PBT.
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.8.6
wwpLeosChassisPlatformCapsMaxTunnels
Description and OID
1.3.6.1.4.1.6141.2.60.11.1.1.8.7
wwpLeosChassisPlatformCapsMaxIngressTunnels
Description and OID
Status
Access
The maximum number of ingress tunnels supported on this machine in nonnative mode PBT.
current
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.8.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CHASSIS-MIB 27-19
wwpLeosChassisPlatformCapsMaxEgressTunnels
Description and OID
Status
Access
The maximum number of egress tunnels supported on this machine in nonnative mode PBT.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The maximum number of virtual switch members supported on this machine. current
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.8.9
wwpLeosChassisPlatformCapsMaxVcs
1.3.6.1.4.1.6141.2.60.11.1.1.8.10
wwpLeosChassisPlatformCapsMaxVss
1.3.6.1.4.1.6141.2.60.11.1.1.8.11
wwpLeosChassisPlatformCapsMaxVsMembers
Description and OID
1.3.6.1.4.1.6141.2.60.11.1.1.8.12
wwpLeosChassisPlatformCapsMaxLearnedMacs
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.8.13
wwpLeosChassisPlatformCapsMaxFsmtEntries
1.3.6.1.4.1.6141.2.60.11.1.1.8.14
MIB Reference
009-3220-011 Standard Revision A
August 2013
27-20 WWP-LEOS-CHASSIS-MIB
wwpLeosChassisPlatformCapsMaxFsmtCosEntries
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.8.15
wwpLeosChassisPlatformCapsMaxL4ProtEntries
1.3.6.1.4.1.6141.2.60.11.1.1.8.16
wwpLeosChassisPlatformCapsMaxSltEntries
1.3.6.1.4.1.6141.2.60.11.1.1.8.17
wwpLeosChassisPlatformCapsMaxSactEntries
1.3.6.1.4.1.6141.2.60.11.1.1.8.18
wwpLeosChassisPlatformCapsMaxSmtEntries
1.3.6.1.4.1.6141.2.60.11.1.1.8.19
wwpLeosChassisPlatformCapsMaxEprSnids
1.3.6.1.4.1.6141.2.60.11.1.1.8.20
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CHASSIS-MIB 27-21
wwpLeosChassisPlatformCapsMaxSltWildcards
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Denotes whether multiple subscribers per port are supported on this machine. current
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.8.21
wwpLeosChassisPlatformCapsVlanTranslation
1.3.6.1.4.1.6141.2.60.11.1.1.8.22
wwpLeosChassisPlatformCapsProtocolFilters
1.3.6.1.4.1.6141.2.60.11.1.1.8.23
wwpLeosChassisPlatformCapsMultiSubsPerPort
Description and OID
1.3.6.1.4.1.6141.2.60.11.1.1.8.24
wwpLeosChassisPlatformCapsVplsFpga
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.8.25
wwpLeosChassisPlatformCapsPbtFpga
1.3.6.1.4.1.6141.2.60.11.1.1.8.26
MIB Reference
009-3220-011 Standard Revision A
August 2013
27-22 WWP-LEOS-CHASSIS-MIB
wwpLeosChassisPlatformCapsAoamFpga
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.8.27
wwpLeosChassisPlatformCapsDcPower
1.3.6.1.4.1.6141.2.60.11.1.1.8.29
wwpLeosChassisPlatformCapsAcPower
1.3.6.1.4.1.6141.2.60.11.1.1.8.30
wwpLeosChassisPlatformCapsRedunPower
1.3.6.1.4.1.6141.2.60.11.1.1.8.31
wwpLeosChassisPlatformCapsNetworkSync
1.3.6.1.4.1.6141.2.60.11.1.1.8.32
wwpLeosChassisPlatformCapsBITSTiming
1.3.6.1.4.1.6141.2.60.11.1.1.8.33
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CHASSIS-MIB 27-23
wwpLeosChassisPlatformCapsGPSTiming
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The maximum number of transport tunnels supported on this machine in native current
mode PBT.
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.8.34
wwpLeosChassisPlatformCapsPTPTiming
1.3.6.1.4.1.6141.2.60.11.1.1.8.35
wwpLeosChassisPlatformCapsMaxTunnelsNativePbt
Description and OID
1.3.6.1.4.1.6141.2.60.11.1.1.8.36
wwpLeosChassisPlatformCapsMaxDecapTunnelsNativePbt
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.8.37
wwpLeosChassisPlatformCapsMaxEncapTunnelsNativePbt
1.3.6.1.4.1.6141.2.60.11.1.1.8.38
wwpLeosChassisResourcesMaxPorts
1.3.6.1.4.1.6141.2.60.11.1.1.9.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
27-24 WWP-LEOS-CHASSIS-MIB
wwpLeosChassisResourcesFreePorts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.9.2
wwpLeosChassisResourcesMaxAggrPorts
1.3.6.1.4.1.6141.2.60.11.1.1.9.3
wwpLeosChassisResourcesFreeAggrs
1.3.6.1.4.1.6141.2.60.11.1.1.9.4
wwpLeosChassisResourcesMaxPortStateGrps
1.3.6.1.4.1.6141.2.60.11.1.1.9.5
wwpLeosChassisResourcesFreePortStateGrps
1.3.6.1.4.1.6141.2.60.11.1.1.9.6
wwpLeosChassisResourcesMaxVlans
1.3.6.1.4.1.6141.2.60.11.1.1.9.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CHASSIS-MIB 27-25
wwpLeosChassisResourcesFreeVlans
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.9.8
wwpLeosChassisResourcesMaxVlanMembers
1.3.6.1.4.1.6141.2.60.11.1.1.9.9
wwpLeosChassisResourcesFreeVlanMembers
1.3.6.1.4.1.6141.2.60.11.1.1.9.10
wwpLeosChassisResourcesMaxEprSnets
1.3.6.1.4.1.6141.2.60.11.1.1.9.11
wwpLeosChassisResourcesFreeEprSnets
1.3.6.1.4.1.6141.2.60.11.1.1.9.12
wwpLeosChassisResourcesMaxMcastSnets
1.3.6.1.4.1.6141.2.60.11.1.1.9.13
MIB Reference
009-3220-011 Standard Revision A
August 2013
27-26 WWP-LEOS-CHASSIS-MIB
wwpLeosChassisResourcesFreeMcastSnets
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.9.14
wwpLeosChassisResourcesMaxMcastGroups
1.3.6.1.4.1.6141.2.60.11.1.1.9.15
wwpLeosChassisResourcesFreeMcastGroups
1.3.6.1.4.1.6141.2.60.11.1.1.9.16
wwpLeosChassisResourcesMaxDhcpRelayAgnts
1.3.6.1.4.1.6141.2.60.11.1.1.9.17
wwpLeosChassisResourcesFreeDhcpRelayAgnts
1.3.6.1.4.1.6141.2.60.11.1.1.9.18
wwpLeosChassisResourcesMaxTunnels
1.3.6.1.4.1.6141.2.60.11.1.1.9.19
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CHASSIS-MIB 27-27
wwpLeosChassisResourcesFreeTunnels
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.9.20
wwpLeosChassisResourcesMaxIngressTunnels
1.3.6.1.4.1.6141.2.60.11.1.1.9.21
wwpLeosChassisResourcesFreeIngressTunnels
1.3.6.1.4.1.6141.2.60.11.1.1.9.22
wwpLeosChassisResourcesMaxEgressTunnels
1.3.6.1.4.1.6141.2.60.11.1.1.9.23
wwpLeosChassisResourcesFreeEgressTunnels
1.3.6.1.4.1.6141.2.60.11.1.1.9.24
wwpLeosChassisResourcesMaxVcs
1.3.6.1.4.1.6141.2.60.11.1.1.9.25
MIB Reference
009-3220-011 Standard Revision A
August 2013
27-28 WWP-LEOS-CHASSIS-MIB
wwpLeosChassisResourcesFreeVcs
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.9.26
wwpLeosChassisResourcesMaxVss
1.3.6.1.4.1.6141.2.60.11.1.1.9.27
wwpLeosChassisResourcesFreeVss
1.3.6.1.4.1.6141.2.60.11.1.1.9.28
wwpLeosChassisResourcesMaxVsMembers
1.3.6.1.4.1.6141.2.60.11.1.1.9.29
wwpLeosChassisResourcesFreeVsMembers
1.3.6.1.4.1.6141.2.60.11.1.1.9.30
wwpLeosChassisResourcesMaxSlevelWcards
1.3.6.1.4.1.6141.2.60.11.1.1.9.31
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CHASSIS-MIB 27-29
wwpLeosChassisResourcesFreeSlevelWcards
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.9.32
wwpLeosChassisResourcesMaxSlevels
1.3.6.1.4.1.6141.2.60.11.1.1.9.33
wwpLeosChassisResourcesFreeSlevels
1.3.6.1.4.1.6141.2.60.11.1.1.9.34
wwpLeosChassisResourcesMaxSmappings
1.3.6.1.4.1.6141.2.60.11.1.1.9.35
wwpLeosChassisResourcesFreeSmappings
1.3.6.1.4.1.6141.2.60.11.1.1.9.36
wwpLeosChassisResourcesMaxSmappingCosResources
1.3.6.1.4.1.6141.2.60.11.1.1.9.37
MIB Reference
009-3220-011 Standard Revision A
August 2013
27-30 WWP-LEOS-CHASSIS-MIB
wwpLeosChassisResourcesFreeSmappingCosResources
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.9.38
wwpLeosChassisResourcesMaxSmappingPrtclResources
1.3.6.1.4.1.6141.2.60.11.1.1.9.39
wwpLeosChassisResourcesFreeSmappingPrtclResources
1.3.6.1.4.1.6141.2.60.11.1.1.9.40
wwpLeosChassisResourcesMaxQosResEgs
1.3.6.1.4.1.6141.2.60.11.1.1.9.41
wwpLeosChassisResourcesFreeQosResEgs
1.3.6.1.4.1.6141.2.60.11.1.1.9.42
wwpLeosChassisResourcesMaxTprofGblCscdEntries
1.3.6.1.4.1.6141.2.60.11.1.1.9.43
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CHASSIS-MIB 27-31
wwpLeosChassisResourcesFreeTprofGblCscdEntries
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.9.44
wwpLeosChassisResourcesMaxTprofCscdEntries
1.3.6.1.4.1.6141.2.60.11.1.1.9.45
wwpLeosChassisResourcesFreeTprofCscdEntries
1.3.6.1.4.1.6141.2.60.11.1.1.9.46
wwpLeosChassisResourcesMaxTprofStdEntries
1.3.6.1.4.1.6141.2.60.11.1.1.9.47
wwpLeosChassisResourcesFreeTprofStdEntries
1.3.6.1.4.1.6141.2.60.11.1.1.9.48
wwpLeosChassisResourcesMaxSaccessEntries
1.3.6.1.4.1.6141.2.60.11.1.1.9.49
MIB Reference
009-3220-011 Standard Revision A
August 2013
27-32 WWP-LEOS-CHASSIS-MIB
wwpLeosChassisResourcesFreeSaccessEntries
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.9.50
wwpLeosChassisResourcesMaxSmacEntries
1.3.6.1.4.1.6141.2.60.11.1.1.9.51
wwpLeosChassisResourcesFreeSmacEntries
1.3.6.1.4.1.6141.2.60.11.1.1.9.52
wwpLeosChassisResourcesMaxDrvNoLrnSacResources
1.3.6.1.4.1.6141.2.60.11.1.1.9.53
wwpLeosChassisResourcesFreeDrvNoLrnSacResources
1.3.6.1.4.1.6141.2.60.11.1.1.9.54
wwpLeosChassisResourcesMaxLearnEntries
1.3.6.1.4.1.6141.2.60.11.1.1.9.55
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CHASSIS-MIB 27-33
wwpLeosChassisResourcesFreeLearnEntries
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.9.56
wwpLeosChassisResourcesMaxCustomPrtcls
1.3.6.1.4.1.6141.2.60.11.1.1.9.57
wwpLeosChassisResourcesFreeCustomPrtcls
1.3.6.1.4.1.6141.2.60.11.1.1.9.58
wwpLeosChassisResourcesMaxPrtcls
1.3.6.1.4.1.6141.2.60.11.1.1.9.59
wwpLeosChassisResourcesFreePrtcls
1.3.6.1.4.1.6141.2.60.11.1.1.9.60
wwpLeosChassisResourcesMaxPrtclFilters
1.3.6.1.4.1.6141.2.60.11.1.1.9.61
MIB Reference
009-3220-011 Standard Revision A
August 2013
27-34 WWP-LEOS-CHASSIS-MIB
wwpLeosChassisResourcesFreePrtclFilters
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.11.1.1.9.62
wwpLeosChassisResourcesMaxPrtclFilterMembs
1.3.6.1.4.1.6141.2.60.11.1.1.9.63
wwpLeosChassisResourcesFreePrtclFilterMembs
1.3.6.1.4.1.6141.2.60.11.1.1.9.64
wwpLeosChassisResourcesMaxBcastFilters
1.3.6.1.4.1.6141.2.60.11.1.1.9.65
wwpLeosChassisResourcesFreeBcastFilters
1.3.6.1.4.1.6141.2.60.11.1.1.9.66
wwpLeosChassisResourcesMaxBcastFilterMembs
1.3.6.1.4.1.6141.2.60.11.1.1.9.67
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CHASSIS-MIB 27-35
wwpLeosChassisResourcesFreeBcastFilterMembs
Description and OID
Status
Access
current
read-only
Status
Access
This variable indicates the category of post errors. This object is sent out as
one of the binding in Post Error Notification.
current
accessible-fornotify
Status
Access
current
accessible-fornotify
Status
Access
current
accessible-fornotify
Status
Access
This variable indicates the post error message associated with category
wwpLeosChassisPostErrorCategory.
current
accessible-fornotify
Status
Access
current
accessible-fornotify
1.3.6.1.4.1.6141.2.60.11.1.1.9.68
wwpLeosChassisPostErrorCategory
1.3.6.1.4.1.6141.2.60.11.1.2.1
wwpLeosChassisPostErrorValue
1.3.6.1.4.1.6141.2.60.11.1.2.2
wwpLeosChassisPostErrorCode
1.3.6.1.4.1.6141.2.60.11.1.2.3
wwpLeosChassisPostErrorMsg
1.3.6.1.4.1.6141.2.60.11.1.2.4
wwpLeosChassisRebootReasonErrorType
1.3.6.1.4.1.6141.2.60.11.1.2.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
27-36 WWP-LEOS-CHASSIS-MIB
wwpLeosChassisSnmpState
Description and OID
Status
Access
current
accessible-fornotify
1.3.6.1.4.1.6141.2.60.11.1.2.6
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
wwpLeosChassisPowerSupplyStatusNotification
A wwpLeosChassisPowerSupplyStatusNotification is sent if a power supply
state is changed.
Object Identifier: 1.3.6.1.4.1.6141.2.60.11.2.0.1
Status: current
Supported Platforms: none
wwpLeosChassisFanModuleNotification
A wwpLeosChassisFanModuleNotification is sent if the fan state changes.
Object Identifier: 1.3.6.1.4.1.6141.2.60.11.2.0.2
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosChassisTempNotification
A wwpLeosChassisTempNotification is sent if the
wwpLeosChassisTempSensorState is changed.
Object Identifier: 1.3.6.1.4.1.6141.2.60.11.2.0.3
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosChassisPowerSwitchNotification
A wwpLeosChassisPowerSwitchNotification is sent if the input power supply
is switched to Battery from the AC power or switched from the Battery to the
AC Power.
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CHASSIS-MIB 27-37
wwpLeosChassisBatteryStatusNotification
A wwpLeosChassisBatteryStatusNotification is sent if the Battery status
changes. If the device supports the configurable battery state names, then the
corresponding battery state name should also be sent with this notification.
Object Identifier: 1.3.6.1.4.1.6141.2.60.11.2.0.5
Status: current
Supported Platforms: none
wwpLeosChassisBatteryVoltageLevelNotification
A wwpLeosChassisBatteryVoltageLevelNotification is sent if the Battery
voltage level changes from normal to low or vice versa. If the device supports
the configurable battery state names, then the corresponding battery state
name should also be sent with this notification.
Object Identifier: 1.3.6.1.4.1.6141.2.60.11.2.0.6
Status: current
Supported Platforms: none
wwpLeosChassisBatteryConditionNotification
A wwpLeosChassisBatteryConditionNotification is sent if the Battery
condition changes from good to bad or vice versa. If the device supports the
configurable battery state names, then the corresponding battery state name
should also be sent with this notification.
Object Identifier: 1.3.6.1.4.1.6141.2.60.11.2.0.7
Status: current
Supported Platforms: none
wwpLeosChassisPowerSourceNotification
A wwpLeosChassisPowerSourceNotification is sent if the Battery input power
source changes from battery to primary power or vice versa. A device which
supports wwpLeosChassisPowerSwitchNotification should not support this
MIB Reference
009-3220-011 Standard Revision A
August 2013
27-38 WWP-LEOS-CHASSIS-MIB
notification. If the device supports the configurable battery state names, then
the corresponding battery state name should also be sent with this
notification.
Object Identifier: 1.3.6.1.4.1.6141.2.60.11.2.0.8
Status: current
Supported Platforms: none
wwpLeosChassisPostErrorNotification
A wwpLeosChassisPostErrorNotification is sent after cold start trap if the
device detects post errors.
Object Identifier: 1.3.6.1.4.1.6141.2.60.11.2.0.9
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosChassisRebootNotification
A wwpLeosChassisRebootNotification is sent whenever device is rebooted
using CLI / SNMP.
Object Identifier: 1.3.6.1.4.1.6141.2.60.11.2.0.10
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosChassisSnmpStateNotification
This notification is sent everytime SNMP operational state is changed. If
SNMP is globally disabled then the device does not send COLD start trap, but
instead it sends a wwpLeosChassisSnmpStateNotification notification.
Object Identifier: 1.3.6.1.4.1.6141.2.60.11.2.0.11
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosChassisDyingGaspNotification
This notification is sent when the system goes down
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-CHASSIS-MIB 27-39
wwpLeosChassisDoorStatusChangeNotification
This notification is sent each time the chassis door is opened.
Object Identifier: 1.3.6.1.4.1.6141.2.60.11.2.0.13
Status: deprecated
Supported Platforms: none
wwpLeosChassisInnerDoorStatusChangeNotification
This notification is sent each time the chassis inner door status changes.
Object Identifier: 1.3.6.1.4.1.6141.2.60.11.2.0.14
Status: current
Supported Platforms: 3931
wwpLeosChassisOuterDoorStatusChangeNotification
This notification is sent each time the chassis outer door status changes.
Object Identifier: 1.3.6.1.4.1.6141.2.60.11.2.0.15
Status: current
Supported Platforms: 3931
wwpLeosChassisExternalAlarmStatusChangeNotification
This notification is sent each time the chassis external alarm status changes.
Object Identifier: 1.3.6.1.4.1.6141.2.60.11.2.0.16
Status: current
Supported Platforms: 3930, 3931, 3932, 5142, 5150, 5160
wwpLeosChassisDoorAlarmStatusChangeNotification
This notification is sent each time the door alarm status changes.
Object Identifier: 1.3.6.1.4.1.6141.2.60.11.2.0.17
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
27-40 WWP-LEOS-CHASSIS-MIB
Status: current
Supported Platforms: none
MIB Reference
009-3220-011 Standard Revision A
August 2013
28-1
WWP-LEOS-COMMUNITY-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-COMMUNITY-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosCommunityTable
Description and OID
Status
Table of read/write Community entries. Multiple Set Operation must be used to deprecated
create entries in the table. The following objects must be set to valid values to
create entry: wwpLeosCommunityRights, wwpLeosCommunityStatus. If
wwpLeosCommunityName is not set to anything the device sets it to public. If
wwpLeosCommunityAddr is not set to anything the device sets it to 0.0.0.0.
While deleting an entry, if this is the last entry with read-only or read-write
permission, the device does not allow the deletion.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.22.1.1.1
wwpLeosCommunityEntry
Description and OID
Status
Access
An entry for each read/write community. The SNMP multiple set operation
must be used to create entries in the table.
deprecated
not-accessible
Status
Access
deprecated
read-only
1.3.6.1.4.1.6141.2.60.22.1.1.1.1
wwpLeosCommunityIndex
1.3.6.1.4.1.6141.2.60.22.1.1.1.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
28-2 WWP-LEOS-COMMUNITY-MIB
wwpLeosCommunityName
Description and OID
Status
The name of community string. This is a mandatory object that needs to be set deprecated
in order to create an entry.
Access
read-create
1.3.6.1.4.1.6141.2.60.22.1.1.1.1.2
wwpLeosCommunityAddr
Description and OID
Status
The IP Address of the host(s) or the host name with access rights. A value of deprecated
0 means that access is allowed to any host. This is mandatory object that
needs to be set to create entry.
Access
read-create
1.3.6.1.4.1.6141.2.60.22.1.1.1.1.3
wwpLeosCommunityResolvedIp
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.22.1.1.1.1.4
wwpLeosCommunityRights
Description and OID
Status
Access
deprecated
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.22.1.1.1.1.5
wwpLeosCommunityStatus
Description and OID
deprecated
To create a row in this table, set this object to 'createAndGo'.
wwpLeosCommunityRights must be valid prior to creating entry.
The Agent
should not let all the communities be deleted
as this causes isolation of
the device. At least one
readOnly community and one readWrite
community should always
be present.
read-create
1.3.6.1.4.1.6141.2.60.22.1.1.1.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-COMMUNITY-MIB 28-3
wwpLeosNotifCommunityTable
Description and OID
Status
Table of notification community entries. Multiple set operation must be used to deprecated
create entries in the table.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.22.1.1.2
wwpLeosNotifCommunityEntry
Description and OID
Status
An entry for each notification community. Multiple set operation must be used deprecated
to create entries in the table.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.22.1.1.2.1
wwpLeosNotifIndex
Description and OID
Status
Access
deprecated
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.22.1.1.2.1.1
wwpLeosNotifCommunityName
Description and OID
The community string to be used for the notifications. This is mandatory object deprecated
that needs to be set to create entry.
read-create
1.3.6.1.4.1.6141.2.60.22.1.1.2.1.2
wwpLeosNotifCommunityDestAddr
Description and OID
Status
The IP address or host name of the host to which notification is to be sent. This deprecated
is mandatory object that needs to be set to create entry.
Access
read-create
1.3.6.1.4.1.6141.2.60.22.1.1.2.1.3
wwpLeosNotifCommunityResolvedIpAddr
Description and OID
Status
Access
deprecated
read-only
1.3.6.1.4.1.6141.2.60.22.1.1.2.1.4
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
28-4 WWP-LEOS-COMMUNITY-MIB
wwpLeosNotifCommunityStatus
Description and OID
Status
Access
deprecated
read-create
1.3.6.1.4.1.6141.2.60.22.1.1.2.1.5
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
29-1
WWP-LEOS-DATAPLANE-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-DATAPLANE-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosDpTsQCAProfileSREDTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
The Profile Id
current
not-accessible
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.1
wwpLeosDpTsQCAProfileSREDEntry
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.1.1
wwpLeosDpTsQCAProfileSREDId
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.1.1.1
wwpLeosDpTsQCAProfileSREDName
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
29-2 WWP-LEOS-DATAPLANE-MIB
wwpLeosDpTsQCAProfileSREDGreenThreshold
Description and OID
Status
Access
The green threshold value for this profile above which all green frames are
dropped.
current
read-create
Status
Access
current
read-create
Status
Access
The yellow threshold value for this profile above which all green frames are
dropped.
current
read-create
Status
Access
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.1.1.4
wwpLeosDpTsQCAProfileSREDGreenDropProbability
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.1.1.5
wwpLeosDpTsQCAProfileSREDYellowThreshold
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.1.1.6
wwpLeosDpTsQCAProfileSREDYellowDropProbability
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.1.1.7
wwpLeosDpTsQCAProfileSREDRowStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, a manager must set this object to 'createAndGo'.
To delete a row in this table, set this object to 'destroy'.
read-create
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.1.1.9
wwpLeosDpTsQCAProfileWREDSimpleTable
Description and OID
Status
current
The (conceptual) table listing configuration parameters of congestion
Avoidance profile for Simple WRED type of congestion Avoidance Profile type.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-DATAPLANE-MIB 29-3
wwpLeosDpTsQCAProfileWREDSimpleEntry
Description and OID
Status
Access
not-accessible
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1
wwpLeosDpTsQCAProfileWREDSimpleId
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
Specifies the threshold above which all the TCP green frames are dropped.
current
read-create
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.1
wwpLeosDpTsQCAProfileWREDSimpleName
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.2
wwpLeosDpTsQCAProfileWREDSimpleTCPGreenThreshold
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.3
wwpLeosDpTsQCAProfileWREDSimpleTCPGreenUpperThreshold
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.4
wwpLeosDpTsQCAProfileWREDSimpleTCPGreenMaxDropProbability
Description and OID
Status
Access
Specifies the maximum drop probability for TCP green frames before hitting
the TCP green upper threshold.
current
read-create
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
29-4 WWP-LEOS-DATAPLANE-MIB
wwpLeosDpTsQCAProfileWREDSimpleTCPYellowThreshold
Description and OID
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.6
wwpLeosDpTsQCAProfileWREDSimpleTCPYellowUpperThreshold
Description and OID
Status
Access
Specifies the threshold above which all the TCP yellow frames are dropped.
current
read-create
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.7
wwpLeosDpTsQCAProfileWREDSimpleTCPYellowMaxDropProbability
Description and OID
Status
Access
Specifies the max drop probability for TCP yellow frames before hitting the
TCP yellow upper threshold.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.8
wwpLeosDpTsQCAProfileWREDSimpleRowStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, a manager must set this object to 'createAndGo'.
To delete a row in this table, set this object to 'destroy'.
read-create
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.9
wwpLeosDpTsQCAProfileWREDSimpleNonTCPThreshold
Description and OID
Status
Access
current
read-create
Status
Access
Specifies the threshold above which all the non-TCP frames are dropped.
current
read-create
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.10
wwpLeosDpTsQCAProfileWREDSimpleNonTCPUpperThreshold
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-DATAPLANE-MIB 29-5
wwpLeosDpTsQCAProfileWREDSimpleNonTCPMaxDropProbability
Description and OID
Status
Specifies the maximum drop probability for non-TCP frames before hitting the current
non-TCP upper threshold.
Access
read-create
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.12
wwpLeosDpTsQCAProfileWREDSimpleGreenLowerThreshold
Description and OID
Status
Access
current
read-create
Status
Access
Specifies the threshold above which all the green frames are dropped.
current
read-create
Status
Access
Specifies the maximum drop probability for green frames before hitting the
green upper threshold.
current
read-create
Status
Access
current
read-create
Status
Access
Specifies the threshold above which all the yellow frames are dropped.
current
read-create
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.13
wwpLeosDpTsQCAProfileWREDSimpleGreenUpperThreshold
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.14
wwpLeosDpTsQCAProfileWREDSimpleGreenMaxDropProbability
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.15
wwpLeosDpTsQCAProfileWREDSimpleYellowLowerThreshold
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.16
wwpLeosDpTsQCAProfileWREDSimpleYellowUpperThreshold
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.17
MIB Reference
009-3220-011 Standard Revision A
August 2013
29-6 WWP-LEOS-DATAPLANE-MIB
wwpLeosDpTsQCAProfileWREDSimpleYellowMaxDropProbability
Description and OID
Status
Access
Specifies the maximum drop probability for yellow frames before hitting the
yellow upper threshold.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.18
wwpLeosDpTsQCAProfileWREDSimpleYellowAdmitLimit
Description and OID
Specifies queue limit above which yellow frames are dropped and below which current
they are not dropped. This should not be confused with the yellow curve.
read-create
1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.19
wwpLeosDpTsQEgressPortQueueGroupTable
Description and OID
Status
The (conceptual) table listing configuration parameters of Egress Port Queue. current
Access
not-accessible
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.1
wwpLeosDpTsQEgressPortQueueGroupEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
Group Id of the egress port queue group. This is the same as the pgid of the
port.
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.1.1
wwpLeosDpTsQEgressPortQueueGroupId
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.1.1.1
wwpLeosDpTsQEgressPortQueueGroupQCount
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-DATAPLANE-MIB 29-7
wwpLeosDpTsQEgressPortQueueGroupSchedulerAlgorithm
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.1.1.3
wwpLeosDpTsQEgressPortQueueGroupShaperBandwidth
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.1.1.4
wwpLeosDpTsQEgressPortQueueGroupBurstSize
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.1.1.5
wwpLeosDpTsQEgressPortQueueGroupWdrrSchedulerGranularity
Description and OID
Status
Access
current
read-write
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.1.1.6
wwpLeosDpTsQEgressPortQueueGroupQConfigTable
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.2
wwpLeosDpTsQEgressPortQueueGroupQConfigEntry
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.2.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
29-8 WWP-LEOS-DATAPLANE-MIB
wwpLeosDpTsQEgressPortQueueGroupQueueId
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.2.1.1
wwpLeosDpTsQEgressPortQueueGroupQueueCAPId
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.2.1.2
wwpLeosDpTsQEgressPortQueueGroupQueuePriorityId
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.2.1.3
wwpLeosDpTsQEgressPortQueueGroupQueueSchedulerWeight
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.2.1.4
wwpLeosDpTsQEgressPortQueueGroupQueueSize
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.2.1.5
wwpLeosDpTsQEgressPortQueueGroupQueueCIR
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.2.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-DATAPLANE-MIB 29-9
wwpLeosDpTsQEgressPortQueueGroupQueueCBS
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.2.1.7
wwpLeosDpTsQEgressPortQueueGroupQueueEIR
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.2.1.8
wwpLeosDpTsQEgressPortQueueGroupQueueEBS
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.2.1.9
wwpLeosDpTsQEgressPortQueueGroupQStatsTable
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.3
wwpLeosDpTsQEgressPortQueueGroupQStatsEntry
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.3.1
wwpLeosDpTsQEgressPortQueueGroupStatsQueueId
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.3.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
29-10 WWP-LEOS-DATAPLANE-MIB
wwpLeosDpTsQEgressPortQueueGroupQueueStatsTxBytes
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.3.1.2
wwpLeosDpTsQEgressPortQueueGroupQueueStatsTxPkts
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.3.1.3
wwpLeosDpTsQEgressPortQueueGroupQueueStatsDroppedBytes
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.3.1.4
wwpLeosDpTsQEgressPortQueueGroupQueueStatsDroppedPkts
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.3.1.5
wwpLeosDpTsQEgressPortQueueGroupQueueStatsClear
Description and OID
When this value is set to true, this queue's statistics is reset to 0. When read, current
this always returns false
read-write
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.3.1.6
wwpLeosDpTsQueueMapTable
Description and OID
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-DATAPLANE-MIB 29-11
wwpLeosDpTsQueueMapEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1
wwpLeosDpTsQueueMapId
1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1.1
wwpLeosDpTsQueueMapName
1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1.2
wwpLeosDpTsQueueMapQCount
1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1.3
wwpLeosDpTsQueueMapRCOS0
1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1.4
wwpLeosDpTsQueueMapRCOS1
1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
29-12 WWP-LEOS-DATAPLANE-MIB
wwpLeosDpTsQueueMapRCOS2
Description and OID
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1.6
wwpLeosDpTsQueueMapRCOS3
1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1.7
wwpLeosDpTsQueueMapRCOS4
1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1.8
wwpLeosDpTsQueueMapRCOS5
1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1.9
wwpLeosDpTsQueueMapRCOS6
1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1.10
wwpLeosDpTsQueueMapRCOS7
1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-DATAPLANE-MIB 29-13
wwpLeosDpTsQueueMapRowStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, a manager must set this object to 'createAndGo'.
To delete a row in this table, set this object to 'destroy'.
Access
read-create
1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1.12
wwpLeosDpTsCosMapProfileTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.500.1.1.2.1
wwpLeosDpTsCosMapProfileEntry
1.3.6.1.4.1.6141.2.60.500.1.1.2.1.1
wwpLeosDpTsCosMapProfileId
Description and OID
current
Unique identifier for the resolved CoS map profile. The maximum allowed
profiles on the device is equal to the number of ports + 1 (Default COS map).
not-accessible
1.3.6.1.4.1.6141.2.60.500.1.1.2.1.1.1
wwpLeosDpTsCosMapProfileName
Description and OID
Status
Access
current
read-create
Status
Access
Setting this object to createAndGo creates a COS map profile. Setting the
object to destroy deletes a COS map profile.
current
read-create
1.3.6.1.4.1.6141.2.60.500.1.1.2.1.1.2
wwpLeosDpTsCosMapRowStatus
1.3.6.1.4.1.6141.2.60.500.1.1.2.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
29-14 WWP-LEOS-DATAPLANE-MIB
wwpLeosDpTsDot1dCosMapTable
Description and OID
Status
Access
Conceptual table which represents the dot1d CoS map to internal RCOS
values for a given profile.
deprecated
not-accessible
Status
Access
deprecated
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-write
Status
Access
Conceptual table which represents the DSCP CoS map to internal RCOS
values for a given profile.
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.500.1.1.2.2
wwpLeosDpTsDot1dCosMapEntry
1.3.6.1.4.1.6141.2.60.500.1.1.2.2.1
wwpLeosDpTsDot1dCosMapDot1dValue
1.3.6.1.4.1.6141.2.60.500.1.1.2.2.1.1
wwpLeosDpTsDot1dCosMapRCOS
1.3.6.1.4.1.6141.2.60.500.1.1.2.2.1.2
wwpLeosDpTsDscpCosMapTable
1.3.6.1.4.1.6141.2.60.500.1.1.2.3
wwpLeosDpTsDscpCosMapEntry
1.3.6.1.4.1.6141.2.60.500.1.1.2.3.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-DATAPLANE-MIB 29-15
wwpLeosDpTsDscpCosMapDscpValue
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-write
Status
Access
The internal resolved color R-Color of the frame. Green (1), Yellow(2)
represents frame's internal R-Color.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.500.1.1.2.3.1.1
wwpLeosDpTsDscpCosMapRCOS
1.3.6.1.4.1.6141.2.60.500.1.1.2.3.1.2
wwpLeosDpTsDscpCosMapRColorValue
1.3.6.1.4.1.6141.2.60.500.1.1.2.3.1.3
wwpLeosDpTsDot1dDeiCosMapTable
Description and OID
current
Conceptual table which represents the dot1d/dot1d-dei cos/color map to
internal RCOS/Rcolor values for a given profile. This table is the new extended
version of the deprecated wwpLeosDpTsDot1dCosMapTable. It has color
attributes now.
not-accessible
1.3.6.1.4.1.6141.2.60.500.1.1.2.4
wwpLeosDpTsDot1dDeiCosMapEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.500.1.1.2.4.1
wwpLeosDpTsDot1dDeiCosMapDot1dValue
1.3.6.1.4.1.6141.2.60.500.1.1.2.4.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
29-16 WWP-LEOS-DATAPLANE-MIB
wwpLeosDpTsDot1dDeiCosMapDeiValue
Description and OID
Status
Access
current
not-accessible
Status
Access
The corresponding RCos value mapped to the dot1d COS and dot1d DEI
value.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.500.1.1.2.4.1.2
wwpLeosDpTsDot1dDeiCosMapRCosValue
1.3.6.1.4.1.6141.2.60.500.1.1.2.4.1.3
wwpLeosDpTsDot1dDeiCosMapRColorValue
Description and OID
The corresponding RColor value mapped to the dot1d CoS and dot1dei value. current
read-write
1.3.6.1.4.1.6141.2.60.500.1.1.2.4.1.4
wwpLeosDpTsMplsTcCosMapTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.500.1.1.2.5
wwpLeosDpTsMplsTcCosMapEntry
1.3.6.1.4.1.6141.2.60.500.1.1.2.5.1
wwpLeosDpTsMplsTcCosMapMplsTcValue
1.3.6.1.4.1.6141.2.60.500.1.1.2.5.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-DATAPLANE-MIB 29-17
wwpLeosDpTsMplsTcCosMapRCosValue
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.500.1.1.2.5.1.2
wwpLeosDpTsMplsTcCosMapRColorValue
1.3.6.1.4.1.6141.2.60.500.1.1.2.5.1.3
wwpLeosDpTsFrameCosMapProfileTable
1.3.6.1.4.1.6141.2.60.500.1.1.3.1
wwpLeosDpTsFrameCosMapProfileEntry
1.3.6.1.4.1.6141.2.60.500.1.1.3.1.1
wwpLeosDpTsFrameCosMapProfileId
Description and OID
Unique identifier for the frame CoS map profile. The maximum allowed profiles current
on the device is equal to 4 at this time.
not-accessible
1.3.6.1.4.1.6141.2.60.500.1.1.3.1.1.1
wwpLeosDpTsFrameCosMapProfileName
Description and OID
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.500.1.1.3.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
29-18 WWP-LEOS-DATAPLANE-MIB
wwpLeosDpTsFrameCosMapRowStatus
Description and OID
Status
Access
Setting this object to createAndGo creates a frame CoS map profile. Setting
the object to destroy deletes a frame CoS map profile.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.500.1.1.3.1.1.3
wwpLeosDpTsFrameCosMapTable
Description and OID
Conceptual table which represents the resolved CoS to dot1d CoS map for a current
given profile.
not-accessible
1.3.6.1.4.1.6141.2.60.500.1.1.3.2
wwpLeosDpTsFrameCosMapEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.500.1.1.3.2.1
wwpLeosDpTsFrameCosMapRCosValue
1.3.6.1.4.1.6141.2.60.500.1.1.3.2.1.1
wwpLeosDpTsFrameCosMapRColorValue
Description and OID
The corresponding resolved color value. Green (1) and Yellow(2) get mapped current
to the dot1d COS/CFI/DEI value.
not-accessible
1.3.6.1.4.1.6141.2.60.500.1.1.3.2.1.2
wwpLeosDpTsFrameCosMapDot1dValue
Description and OID
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.500.1.1.3.2.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-DATAPLANE-MIB 29-19
wwpLeosDpTsFrameCosMapDot1dDeiValue
Description and OID
Status
Access
The outgoing frame CFI/DEI frame marking. Green (0), Yellow(1) in the CFI/
DEI bit position of the frame represents the frame's outgoing color
current
read-write
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.500.1.1.3.2.1.4
wwpLeosDpTsFrameCosMapMplsTcValue
1.3.6.1.4.1.6141.2.60.500.1.1.3.2.1.5
wwpLeosDpPfgPolicyTable
Description and OID
The (conceptual) table which represents the forwarding restrictions for a given current
global PFG Policy.
not-accessible
1.3.6.1.4.1.6141.2.60.500.2.1
wwpLeosDpPfgPolicyEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.500.2.1.1
wwpLeosDpPfgPolicyIndex
1.3.6.1.4.1.6141.2.60.500.2.1.1.1
wwpLeosDpPfgPolicyName
1.3.6.1.4.1.6141.2.60.500.2.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
29-20 WWP-LEOS-DATAPLANE-MIB
wwpLeosDpPfgPolicyFwdGrpA
Description and OID
Status
The group restrictions that apply to all members of PFG A. A numerical value current
of 1 indicates that PFG A forwards only to other port members within PFG A:
A-> A. A numerical value of 2 indicates that PFG A forwards only to members
of PFG B: A-> B. Finally, a value of 3 indicates that PFG A forwards both group
A and B: A-> A,B.
Access
read-write
1.3.6.1.4.1.6141.2.60.500.2.1.1.3
wwpLeosDpPfgPolicyFwdGrpB
Description and OID
Status
The group restrictions that apply to all members of PFG B. A numerical value current
of 1 indicates that PFG B forwards only to other port members within PFG A:
A-> A. A numerical value of 2 indicates that PFG B forwards only to members
of PFG B: A-> B. Finally, a value of 3 indicates that PFG B forwards both group
A and B: A-> A,B.
Access
read-write
1.3.6.1.4.1.6141.2.60.500.2.1.1.4
wwpLeosDpPfgPolicyAdminState
Description and OID
Status
The administrative state of PFG on a particular global PFG Policy. Disabling a current
global PFG Policy disables PFG on all forwarding domains that enable that
Policy.
Access
read-write
1.3.6.1.4.1.6141.2.60.500.2.1.1.5
wwpLeosDpPfgVlanTable
Description and OID
Status
Access
The (conceptual) table which represents the PFG state of a particular VLAN.
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.500.2.2
wwpLeosDpPfgVlanEntry
1.3.6.1.4.1.6141.2.60.500.2.2.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-DATAPLANE-MIB 29-21
wwpLeosDpPfgVlanId
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-write
Status
Access
current
The operational state of PFG on on a particular VLAN. This state is set to
'enabled' only when PFG is administratively enabled globally, on the global
PFG Policy a VLAN references, and on the VLAN itself. The operational state
is set to 'vsOverride' when the VLAN is currently the active VLAN of a VS.
read-only
1.3.6.1.4.1.6141.2.60.500.2.2.1.1
wwpLeosDpPfgVlanName
1.3.6.1.4.1.6141.2.60.500.2.2.1.2
wwpLeosDpPfgVlanAdminState
1.3.6.1.4.1.6141.2.60.500.2.2.1.3
wwpLeosDpPfgVlanOperState
Description and OID
1.3.6.1.4.1.6141.2.60.500.2.2.1.4
wwpLeosDpPfgVsTable
Description and OID
Status
Access
The (conceptual) table which represents the PFG state of a particular VS.
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.500.2.3
wwpLeosDpPfgVsEntry
1.3.6.1.4.1.6141.2.60.500.2.3.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
29-22 WWP-LEOS-DATAPLANE-MIB
wwpLeosDpPfgVsIndex
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
The active VLAN for a particular VS. The PFG administrative state for the
identified VLAN is overridden by the administrative state of the VS this
particular entry is associated with.
current
read-only
Status
Access
current
read-write
Status
Access
The operation state of PFG on on a particular VS. The operational state of PFG current
is enabled only when PFG is administratively enabled globally, on the global
PFG Policy a VLAN references, and on the VS itself.
read-only
1.3.6.1.4.1.6141.2.60.500.2.3.1.1
wwpLeosDpPfgVsName
1.3.6.1.4.1.6141.2.60.500.2.3.1.2
wwpLeosDpPfgVsActiveVlan
1.3.6.1.4.1.6141.2.60.500.2.3.1.3
wwpLeosDpPfgVsAdminState
1.3.6.1.4.1.6141.2.60.500.2.3.1.4
wwpLeosDpPfgVsOperState
Description and OID
1.3.6.1.4.1.6141.2.60.500.2.3.1.5
wwpLeosDpPfgMembTable
Description and OID
Status
Access
The (conceptual) table listing the forwarding group for PFG port members.
current
not-accessible
1.3.6.1.4.1.6141.2.60.500.2.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-DATAPLANE-MIB 29-23
wwpLeosDpPfgMembEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The PFG a particular port belongs to. Port membership is specified on a per
global PFG Policy basis.
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.500.2.4.1
wwpLeosDpPfgMembPortId
1.3.6.1.4.1.6141.2.60.500.2.4.1.1
wwpLeosDpPfgMembPortName
1.3.6.1.4.1.6141.2.60.500.2.4.1.2
wwpLeosDpPfgMembPolicyName
1.3.6.1.4.1.6141.2.60.500.2.4.1.3
wwpLeosDpPfgMembFwdGrp
1.3.6.1.4.1.6141.2.60.500.2.4.1.4
wwpLeosDpPfgGlobalAdminState
1.3.6.1.4.1.6141.2.60.500.2.5
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
30-1
WWP-LEOS-DHCP-CLIENT-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-DHCP-CLIENT-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosDhcpIfName
Description and OID
Status
The ifDesc associated with the DHCP client. It can be set to 'remote' or 'local'. current
Access
read-write
1.3.6.1.4.1.6141.2.60.17.1.1.1
wwpLeosDhcpStatus
Description and OID
Status
Access
Setting this object to 'enable' enables the DHCP client on this interface.
current
read-write
Status
Access
The current state of the DHCP client on this interface as per RFC2131.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.17.1.1.2
wwpLeosDhcpState
1.3.6.1.4.1.6141.2.60.17.1.1.3
wwpLeosDhcpLeaseOffered
1.3.6.1.4.1.6141.2.60.17.1.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
30-2 WWP-LEOS-DHCP-CLIENT-MIB
wwpLeosDhcpLeaseRemaining
Description and OID
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.17.1.1.6
wwpLeosDhcpDiscoveryMsgInterval
Description and OID
The time interval for discovery messages issued before the client receives the current
first reply.
read-write
1.3.6.1.4.1.6141.2.60.17.1.1.7
wwpLeosDhcpRenewalTime
Description and OID
Status
Access
The number of seconds before the client begins to renew its address lease with current
the DHCP server. This time is a function typically 50% of the full configured
duration (or lease time) for a client lease. Referred to as T1 in RFC2131.
read-only
1.3.6.1.4.1.6141.2.60.17.1.1.8
wwpLeosDhcpRebindingTime
Description and OID
Status
Access
The number of seconds before the client enters the rebinding state if it has not current
renewed its current address lease with the DHCP server. This time is a
function (typically, 87.5%) of the full configured duration (or lease time) for a
client lease.
Referred to as T2 in RFC2131.
read-only
1.3.6.1.4.1.6141.2.60.17.1.1.9
wwpLeosDhcpServerAddress
Description and OID
Status
Access
current
read-only
Status
Access
Setting this object to true forces the DHCP client to renew its lease.
current
read-write
1.3.6.1.4.1.6141.2.60.17.1.1.10
wwpLeosDhcpRenewLease
1.3.6.1.4.1.6141.2.60.17.1.1.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-DHCP-CLIENT-MIB 30-3
wwpLeosDhcpReleaseLease
Description and OID
Status
Access
Setting this object to true forces the DHCP client to release its lease, if the
client DHCP is in the bound state.
current
read-write
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.17.1.1.12
wwpLeosDhcpClientOptionTable
1.3.6.1.4.1.6141.2.60.17.1.1.13
wwpLeosDhcpClientOptionEntry
1.3.6.1.4.1.6141.2.60.17.1.1.13.1
wwpLeosDhcpOptionCodeIndex
1.3.6.1.4.1.6141.2.60.17.1.1.13.1.1
wwpLeosDhcpOptionDesc
1.3.6.1.4.1.6141.2.60.17.1.1.13.1.2
wwpLeosDhcpOptionCode
1.3.6.1.4.1.6141.2.60.17.1.1.13.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
30-4 WWP-LEOS-DHCP-CLIENT-MIB
wwpLeosDhcpOptionState
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.17.1.1.13.1.4
wwpLeosDhcpRelayAgentCircuitId
1.3.6.1.4.1.6141.2.60.17.1.2.1.1
wwpLeosDhcpRelayAgentRemoteId
Description and OID
This object specifies what remote agent ID is used by DHCP relay agent. It can current
be set to macAddress or hostName.
read-write
1.3.6.1.4.1.6141.2.60.17.1.2.1.2
wwpLeosDhcpRelayAgentL2State
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.17.1.2.1.3
wwpLeosDhcpRelayAgentL3State
1.3.6.1.4.1.6141.2.60.17.1.2.1.4
wwpLeosDhcpRelayAgentL2StateTable
Description and OID
Table allows changing configuration of DHCP relay agent functionality for each current
wwpLeosDhcpRelayAgentVlan.
not-accessible
1.3.6.1.4.1.6141.2.60.17.1.2.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-DHCP-CLIENT-MIB 30-5
wwpLeosDhcpRelayAgentL2StateEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
This object specifies the VLAN on which DHCP relay agent is configured.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.17.1.2.2.1
wwpLeosDhcpRelayAgentVlan
1.3.6.1.4.1.6141.2.60.17.1.2.2.1.1
wwpLeosDhcpRelayAgentL2AdminState
Description and OID
This object allows the user to disable or enable DHCP relay agent functionality current
on the given VLAN specified by wwpLeosDhcpRelayAgentVlan.
read-create
1.3.6.1.4.1.6141.2.60.17.1.2.2.1.2
wwpLeosDhcpRelayAgentL2OperState
Description and OID
Status
Access
This object shows the operational status of the DHCP relay agent on given
VLAN.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.17.1.2.2.1.3
wwpLeosDhcpRelayAgentL2StatsClear
Description and OID
This object when set to 'true', clears DHCP relay agent stats for given VLAN. current
read-write
1.3.6.1.4.1.6141.2.60.17.1.2.2.1.4
wwpLeosDhcpRelayAgentL2RowStatus
Description and OID
Status
current
Set this object to 'Destroy' to terminate DHCP L2 Relaying on the VLAN
specified by wwpLeosDhcpRelayAgentVlan. Set this object to 'CreateAndGo'
to enable DHCP L2 Relaying on the VLAN specified by
wwpLeosDhcpRelayAgentVlan.
Access
read-create
1.3.6.1.4.1.6141.2.60.17.1.2.2.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
30-6 WWP-LEOS-DHCP-CLIENT-MIB
wwpLeosDhcpRelayAgentL3StateTable
Description and OID
Status
Table allows changing configuration of DHCP relay agent functionality for each current
wwpLeosDhcpRelayAgentInterfaceIndex.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.17.1.2.3
wwpLeosDhcpRelayAgentL3StateEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
This object specifies the value of the mib object
wwpLeosDhcpRelayAgentIndexType. So if
wwpLeosDhcpRelayAgentIndexType = interface then this object represents
the interface index. if it is set to VLAN then this object represents the VLAN id
and so on.
read-only
1.3.6.1.4.1.6141.2.60.17.1.2.3.1
wwpLeosDhcpRelayAgentInterfaceIndex
Description and OID
1.3.6.1.4.1.6141.2.60.17.1.2.3.1.1
wwpLeosDhcpRelayAgentL3AdminState
Description and OID
Status
This object allows the user to disable or enable DHCP relay agent functionality current
for each wwpLeosDhcpRelayAgentIndexType.
Access
read-create
1.3.6.1.4.1.6141.2.60.17.1.2.3.1.2
wwpLeosDhcpRelayAgentL3OperState
Description and OID
Status
Access
This object shows the operational status of the DHCP relay agent on the given current
interface.
read-only
1.3.6.1.4.1.6141.2.60.17.1.2.3.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-DHCP-CLIENT-MIB 30-7
wwpLeosDhcpRelayAgentL3RowStatus
Description and OID
Status
Access
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.17.1.2.3.1.4
wwpLeosDhcpRelayAgentInterfaceIpTable
Description and OID
This table can be used to add the trusted IP addresses or host names on each current
interface.
not-accessible
1.3.6.1.4.1.6141.2.60.17.1.2.4
wwpLeosDhcpRelayAgentInterfaceIpEntry
Description and OID
Status
Access
Each entry in this table represents the trusted DHCP server IP address on
each interface.
current
not-accessible
Status
Access
This object is used as an index in the table and represents the unique index of current
the IP address for a given wwpLeosDhcpRelayAgentInterfaceIndex.
read-only
1.3.6.1.4.1.6141.2.60.17.1.2.4.1
wwpLeosDhcpRelayAgentInterfaceIpIndex
Description and OID
1.3.6.1.4.1.6141.2.60.17.1.2.4.1.1
wwpLeosDhcpRelayAgentInterfaceIpAddr
Description and OID
Status
This object is used to specify the IP address of the DHCP server which is the current
trusted IP address. This object cannot be modified once entry is created with
some IP.
Access
read-create
1.3.6.1.4.1.6141.2.60.17.1.2.4.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
30-8 WWP-LEOS-DHCP-CLIENT-MIB
wwpLeosDhcpRelayAgentInterfaceIpRowStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table set this object to 'createAndGo'. To delete a row
in this table set this object to 'destroy'.
Access
read-create
1.3.6.1.4.1.6141.2.60.17.1.2.4.1.3
wwpLeosDhcpRelayAgentTrustTable
Description and OID
Status
This table can be used to specify what slot / ports and vlans DHCP relay agent current
can trust.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.17.1.2.5
wwpLeosDhcpRelayAgentTrustEntry
Description and OID
Status
Access
Each entry in this table can be used to specify the slot / port and VLAN to be
trusted.
current
not-accessible
Status
Access
This object is used as index in the table and is used to specify the port.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.17.1.2.5.1
wwpLeosDhcpRelayAgentPort
1.3.6.1.4.1.6141.2.60.17.1.2.5.1.1
wwpLeosDhcpRelayAgentTrustMode
Description and OID
This object can be used to set the port as client trusted, server trusted or not current
trusted.
read-create
1.3.6.1.4.1.6141.2.60.17.1.2.5.1.2
wwpLeosDhcpRelayAgentL2StatsTable
Description and OID
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.17.1.2.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-DHCP-CLIENT-MIB 30-9
wwpLeosDhcpRelayAgentL2StatsEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
This object specifies the number of packets that include IP Sec Headers.
current
read-only
Status
Access
This object specifies the number of packets that have had option 82 added.
current
read-only
Status
Access
This object specifies the number of packets that have had option 82 removed. current
read-only
1.3.6.1.4.1.6141.2.60.17.1.2.6.1
wwpLeosDhcpRelayAgentL2IpSecHeaders
1.3.6.1.4.1.6141.2.60.17.1.2.6.1.1
wwpLeosDhcpRelayAgentL2Option82Added
1.3.6.1.4.1.6141.2.60.17.1.2.6.1.2
wwpLeosDhcpRelayAgentL2Option82Removed
Description and OID
1.3.6.1.4.1.6141.2.60.17.1.2.6.1.3
wwpLeosDhcpRelayAgentL2UntrustedClientPortPktsRx
Description and OID
Status
Access
This object specifies the number of packets received on untrusted client ports. current
read-only
1.3.6.1.4.1.6141.2.60.17.1.2.6.1.4
wwpLeosDhcpRelayAgentL2UntrustedServerPortPktsRx
Description and OID
Status
Access
This object specifies the number of packets received on untrusted server ports. current
read-only
1.3.6.1.4.1.6141.2.60.17.1.2.6.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
30-10 WWP-LEOS-DHCP-CLIENT-MIB
wwpLeosDhcpRelayAgentL2SpoofedDhcpPkts
Description and OID
Status
Access
current
read-only
Status
Access
This object specifies the number of packets with DHCP option 82 that exceed current
option 82.
read-only
1.3.6.1.4.1.6141.2.60.17.1.2.6.1.6
wwpLeosDhcpRelayAgentL2Option82ExceedMTU
Description and OID
1.3.6.1.4.1.6141.2.60.17.1.2.6.1.7
wwpLeosDhcpRelayAgentL2NoTrustedServerPktDrop
Description and OID
Status
Access
This object specifies the number of DHCP packets dropped because there are current
no server trusted ports configured.
read-only
1.3.6.1.4.1.6141.2.60.17.1.2.6.1.8
wwpLeosDhcpRelayAgentL2NoTrustedClientPktDrop
Description and OID
Status
Access
This object specifies the number of DHCP packets dropped because there are current
no client trusted ports configured.
read-only
1.3.6.1.4.1.6141.2.60.17.1.2.6.1.9
wwpLeosDhcpRelayAgentCidStringTable
Description and OID
Status
This table can be used to specify cid strings for slot / ports and vlans that the current
DHCP relay agent can specify in Option 82 CID information.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.17.1.2.7
wwpLeosDhcpRelayAgentCidStringEntry
Description and OID
Status
Access
Each entry in this table can be used to specify a cid string for slot / port and
vlan combinations.
current
not-accessible
1.3.6.1.4.1.6141.2.60.17.1.2.7.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-DHCP-CLIENT-MIB 30-11
wwpLeosDhcpRelayAgentCidStringPort
Description and OID
Status
Access
This object is used as index in the table and is used to specify the port.
current
read-only
Status
Access
This object can be used to set the CID string for the port.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.17.1.2.7.1.1
wwpLeosDhcpRelayAgentCidString
1.3.6.1.4.1.6141.2.60.17.1.2.7.1.2
wwpLeosDhcpRelayAgentCidStringRowStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table set this object to 'createAndGo'. To delete a row
in this table set this object to 'destroy'.
read-create
1.3.6.1.4.1.6141.2.60.17.1.2.7.1.3
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
wwpLeosDhcpClientOptionDisabledNotification
A wwpLeosDhcpClientOptionDisabledNotification is sent whenever device
receives DHCP option which is disabled on the device. Variable bindings
include: wwpLeosDhcpOptionCode.
Object Identifier: 1.3.6.1.4.1.6141.2.60.17.2.0.1
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
MIB Reference
009-3220-011 Standard Revision A
August 2013
31-1
WWP-LEOS-DNS-CLIENT-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-DNS-CLIENT-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosDnsClientStatus
Description and OID
Status
Access
current
read-write
Status
Access
Specifies the admin domain name configured by dhcp for this device.
current
read-only
Status
Access
current
read-only
Status
Access
Specifies the admin domain name configured by user for this device.
current
read-write
1.3.6.1.4.1.6141.2.60.16.1.1.1
wwpLeosDnsClientDhcpDomainName
1.3.6.1.4.1.6141.2.60.16.1.1.2
wwpLeosDnsClientDhcpDomainNameState
1.3.6.1.4.1.6141.2.60.16.1.1.3
wwpLeosDnsClientUserDomainName
1.3.6.1.4.1.6141.2.60.16.1.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
31-2 WWP-LEOS-DNS-CLIENT-MIB
wwpLeosDnsClientUserDomainNameState
Description and OID
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.16.1.1.5
wwpLeosDnsServerTable
Description and OID
A table containing configured DNS Servers information. To create entry in this current
table use SNMP multiple set operation. Following mib objects must be set to
create valid entry wwpLeosDnsServerAddr, wwpLeosDnsServerStatus
not-accessible
1.3.6.1.4.1.6141.2.60.16.1.1.6
wwpLeosDnsServerEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.16.1.1.6.1
wwpLeosDnsServerIndex
1.3.6.1.4.1.6141.2.60.16.1.1.6.1.1
wwpLeosDnsServerAddr
Description and OID
read-write
1.3.6.1.4.1.6141.2.60.16.1.1.6.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-DNS-CLIENT-MIB 31-3
wwpLeosDnsServerUserPriority
Description and OID
Status
Access
current
read-write
Status
Access
current
read-only
Status
Access
The object specifies the scope of this entry. Scope of the entry means who
configured this entry. dhcp or user or both
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.16.1.1.6.1.3
wwpLeosDnsServerDhcpPriority
1.3.6.1.4.1.6141.2.60.16.1.1.6.1.4
wwpLeosDnsServerScope
1.3.6.1.4.1.6141.2.60.16.1.1.6.1.5
wwpLeosDnsServerStatus
Description and OID
This object is used to create and delete rows in the wwpLeosDnsServerTable. current
To create a new row the management station must set the object to
'CreateAndGo'.
read-create
1.3.6.1.4.1.6141.2.60.16.1.1.6.1.6
wwpLeosDnsServerInetAddrType
Description and OID
Status
The Inet address type for the configured DNS Server. Used in conjunction with current
wwpLeosDnsServerInetAddr. When set to: ipv4 : wwpLeosDnsServerInetAddr
should be compliant with InetAddressIPv4 from RFC 4001 ipv6 :
wwpLeosDnsServerInetAddr should be compliant with InetAddressIPv6 from
RFC 4001
Access
read-write
1.3.6.1.4.1.6141.2.60.16.1.1.6.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
31-4 WWP-LEOS-DNS-CLIENT-MIB
wwpLeosDnsServerInetAddr
Description and OID
Status
current
The Inet address for the configured DNS Server. This OID must be used in
conjunction with wwpLeosDnsServerInetAddrType. The InetAddress specified
here is compliant with RFC 4001.
Access
read-write
1.3.6.1.4.1.6141.2.60.16.1.1.6.1.8
wwpLeosDnsServerExtTable
Description and OID
Status
Access
not-accessible
1.3.6.1.4.1.6141.2.60.16.1.1.7
wwpLeosDnsServerExtEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.16.1.1.7.1
wwpLeosDnsServerAdminState
Description and OID
The object specifies the user admin state of this entry. User can configure this current
to enable | disable.
read-write
1.3.6.1.4.1.6141.2.60.16.1.1.7.1.1
wwpLeosDnsServerOperState
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.16.1.1.7.1.2
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
32-1
WWP-LEOS-EXT-LAG-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-EXT-LAG-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosMaxLags
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.14.1.1.1
wwpLeosNumLags
1.3.6.1.4.1.6141.2.60.14.1.1.2
wwpLeosExtLagTable
1.3.6.1.4.1.6141.2.60.14.1.1.3
wwpLeosExtLagEntry
1.3.6.1.4.1.6141.2.60.14.1.1.3.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
32-2 WWP-LEOS-EXT-LAG-MIB
wwpLeosExtAggId
Description and OID
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.14.1.1.3.1.1
wwpLeosExtAggName
Description and OID
The name assigned to this Lag by the Management station. This object can current
only be set while creating LAG. It is not allowed to rename the LAG name once
it is created.
read-create
1.3.6.1.4.1.6141.2.60.14.1.1.3.1.2
wwpLeosExtAggIndex
Description and OID
Status
Access
The unique identifier allocated to this Aggregator by the local System. This current
attribute identifies an Aggregator instance among the subordinate managed
objects of the containing object. This value is read-only. This object refer to the
dot3adAggIndex in the IEEE-8023-LAG-MIB.
read-only
1.3.6.1.4.1.6141.2.60.14.1.1.3.1.3
wwpLeosExtAggStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To disable the
aggregator, set this object to 'notInService'.
Access
read-create
1.3.6.1.4.1.6141.2.60.14.1.1.3.1.4
wwpLeosExtAggMode
Description and OID
Status
Access
This object specifies the mode in which the given aggregation is operating.
current
read-write
1.3.6.1.4.1.6141.2.60.14.1.1.3.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-EXT-LAG-MIB 32-3
wwpLeosExtLagProtectionRevertState
Description and OID
Status
This object specifies that if the primary port goes from operationally disabled current
to operationally enabled it shall become active, and one of the secondary ports
shall become backup if this MIB object is set to 'on' and the
wwpLeosLagProtectionRevertTimer timer expires.
Access
read-write
1.3.6.1.4.1.6141.2.60.14.1.1.3.1.6
wwpLeosExtLagProtectionRevertTimer
Description and OID
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.14.1.1.3.1.7
wwpLeosExtAggHashMode
Description and OID
This object specifies the hash mode used by the aggregation for known unicast current
frames.
read-write
1.3.6.1.4.1.6141.2.60.14.1.1.3.1.8
wwpLeosExtLagProtectionMode
Description and OID
Status
This object specifies the LACP protection-mode in which the given aggregation current
is operating.
Access
read-write
1.3.6.1.4.1.6141.2.60.14.1.1.3.1.9
wwpLeosLagModeTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.14.1.1.4
wwpLeosLagModeEntry
1.3.6.1.4.1.6141.2.60.14.1.1.4.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
32-4 WWP-LEOS-EXT-LAG-MIB
wwpLeosLagPhyPortId
Description and OID
Status
Access
This object specifies the physical port number. It is also used as index in the
table.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.14.1.1.4.1.1
wwpLeosLagAdminMode
Description and OID
This object specifies the administrative mode in which a given port is operating. current
read-write
1.3.6.1.4.1.6141.2.60.14.1.1.4.1.2
wwpLeosLagOperMode
Description and OID
Status
Access
This object specifies the operation mode in which a given port is operating.
current
read-only
Status
Access
The (conceptual) table listing the protection ports for each aggregation.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This object specifies the protection port number. It is also used as index in the current
table.
read-only
1.3.6.1.4.1.6141.2.60.14.1.1.4.1.3
wwpLeosLagProtectionTable
1.3.6.1.4.1.6141.2.60.14.1.1.5
wwpLeosLagProtectionEntry
1.3.6.1.4.1.6141.2.60.14.1.1.5.1
wwpLeosLagProtectionPort
Description and OID
1.3.6.1.4.1.6141.2.60.14.1.1.5.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-EXT-LAG-MIB 32-5
wwpLeosLagProtectionRowStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete entry
set this object to 'destroy'.
Access
read-create
1.3.6.1.4.1.6141.2.60.14.1.1.5.1.2
wwpLeosExtAggFloodHashMode
Description and OID
Status
Access
This object specifies the aggregation hash mode used by unknown unicast,
multicast and broadcast frames for all aggregation ports in the system.
current
read-write
1.3.6.1.4.1.6141.2.60.14.1.1.6
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
33-1
WWP-LEOS-FEATURE-LICENSE-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-FEATURE-LICENSE-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosPremiumFeatureStatusTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
Unique ID assigned to each premium feature requiring a license. It is the index current
into the table.
read-only
1.3.6.1.4.1.6141.2.60.29.1.1.1
wwpLeosPremiumFeatureStatusEntry
1.3.6.1.4.1.6141.2.60.29.1.1.1.1
wwpLeosPremiumFeatureId
Description and OID
1.3.6.1.4.1.6141.2.60.29.1.1.1.1.1
wwpLeosPremiumFeatureName
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.29.1.1.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
33-2 WWP-LEOS-FEATURE-LICENSE-MIB
wwpLeosPremiumFeatureDomainName
Description and OID
Status
Access
The name of the license domain that this premium feature is a member of.
current
read-only
Status
Access
current
read-only
Status
Access
Customer ID.
current
read-only
Status
Access
current
read-only
Status
Access
current
Premium feature license Status. Installed or not installed. infoNotAvailable:
Licensing information is not applicable or does not apply to the platform.
notInstalled: referred to as an invalid license. This means that none of the
operationally enabled modules has a key installed for this license. installed:
referred to as a valid license. This means that all of the operationally enabled
modules have a key installed for this license and all conditional requirements
for such license installation have been satisfied. partial: referred to as a partial
License. This means that one or more, but not all, operationally enabled
modules have a key installed for this license. noBasicLic: Requires Basic or
Carrier License. This means the feature has its key installed into all
operationally enabled modules however such feature is not considered
installed, or valid, because the Basic Edition or Carrier Edition license is not
installed, or valid.
read-only
1.3.6.1.4.1.6141.2.60.29.1.1.1.1.3
wwpLeosPremiumFeatureDomainId
1.3.6.1.4.1.6141.2.60.29.1.1.1.1.4
wwpLeosPremiumFeatureCustomerId
1.3.6.1.4.1.6141.2.60.29.1.1.1.1.5
wwpLeosPremiumFeatureLicenseAdminId
1.3.6.1.4.1.6141.2.60.29.1.1.1.1.6
wwpLeosPremiumFeatureOperStatus
Description and OID
1.3.6.1.4.1.6141.2.60.29.1.1.1.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FEATURE-LICENSE-MIB 33-3
wwpLeosPremiumFeatureDaysRemaining
Description and OID
Status
Access
current
read-only
Status
Access
Specifies the installed license key string for this feature. This object returns 0 current
if this feature is not installed.
read-only
1.3.6.1.4.1.6141.2.60.29.1.1.1.1.8
wwpLeosPremiumFeatureLicenseKey
Description and OID
1.3.6.1.4.1.6141.2.60.29.1.1.1.1.9
wwpLeosPremiumFeatureLicenseKeyInstall
Description and OID
Status
This object can be set to install the license Key. A new License Key, if
current
accepted, is installed and shows up in wwpLeosPremiumFeatureStatusTable.
Get operation on this object always returns 0.
Access
read-write
1.3.6.1.4.1.6141.2.60.29.1.1.2
wwpLeosPremiumFeatureLicenseNameUnInstall
Description and OID
Status
This object can be set to un-install the feature license. This object must be set current
to feature name that needs to be uninstalled. Feature name can be obtained
from (wwpLeosPremiumFeatureName) MIB object in
wwpLeosPremiumFeatureStatusTable table. Get operation on this object
always returns 0.
Access
read-write
1.3.6.1.4.1.6141.2.60.29.1.1.3
wwpLeosPremiumFeatureLicenseInstalledTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.29.1.10.1
wwpLeosPremiumFeatureLicenseInstalledEntry
1.3.6.1.4.1.6141.2.60.29.1.10.1.1
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
33-4 WWP-LEOS-FEATURE-LICENSE-MIB
wwpLeosPremiumFeatureLicenseInstalledModuleIndex
Description and OID
Status
Access
Chassis module number that the premium feature license is installed in.
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.29.1.10.1.1.1
wwpLeosPremiumFeatureLicenseInstalledOemId
1.3.6.1.4.1.6141.2.60.29.1.10.1.1.3
wwpLeosPremiumFeatureLicenseInstalledCustomerId
1.3.6.1.4.1.6141.2.60.29.1.10.1.1.4
wwpLeosPremiumFeatureLicenseInstalledAdminId
1.3.6.1.4.1.6141.2.60.29.1.10.1.1.5
wwpLeosPremiumFeatureLicenseInstalledDaysRemaining
1.3.6.1.4.1.6141.2.60.29.1.10.1.1.6
wwpLeosPremiumFeatureLicenseInstalledEnabled
1.3.6.1.4.1.6141.2.60.29.1.10.1.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FEATURE-LICENSE-MIB 33-5
wwpLeosPremiumFeatureLicenseInstalledSequence
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The name of the license domain that this installed premium feature is a
member of.
current
read-only
Status
Access
Specifies the installed license key string for this installed premium feature. This current
object returns zero length if this feature is not installed.
read-only
1.3.6.1.4.1.6141.2.60.29.1.10.1.1.8
wwpLeosPremiumFeatureLicenseInstalledDomainId
1.3.6.1.4.1.6141.2.60.29.1.10.1.1.9
wwpLeosPremiumFeatureLicenseInstalledName
1.3.6.1.4.1.6141.2.60.29.1.10.1.1.10
wwpLeosPremiumFeatureLicenseInstalledDomainName
1.3.6.1.4.1.6141.2.60.29.1.10.1.1.11
wwpLeosPremiumFeatureLicenseInstalledKey
Description and OID
1.3.6.1.4.1.6141.2.60.29.1.10.1.1.12
wwpLeosPremiumFeatureLicenseInstallModuleIndex
Description and OID
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.29.1.10.2.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
33-6 WWP-LEOS-FEATURE-LICENSE-MIB
wwpLeosPremiumFeatureLicenseInstallKey
Description and OID
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.29.1.10.2.2
wwpLeosPremiumFeatureLicenseInstallCommit
Description and OID
Setting this object to 'True' starts the premium license key installation specified current
by the wwpLeosPremiumFeatureLicenseInstallKey onto the slot specified by
wwpLeosPremiumFeatureLicenseInstallModuleIndex. A new license key, if
accepted, is installed and included in
wwpLeosPremiumFeatureLicenseInstalledTable. Upon a successful set, the
wwpLeosPremiumFeatureLicenseInstallModuleIndex and
wwpLeosPremiumFeatureLicenseInstallKey is cleared. Get operation on this
object always returns 'False'.
read-write
1.3.6.1.4.1.6141.2.60.29.1.10.2.3
wwpLeosPremiumFeatureLicenseInstallUnsuccessful
Description and OID
Status
Access
This object represents the status of an install operation. This object is included current
in the wwpLeosPremiumFeatureLicenseInstallErrorNotification upon an
unsuccessful installation. Get operation on this object always returns zero
length.
read-only
1.3.6.1.4.1.6141.2.60.29.1.10.2.4
wwpLeosPremiumFeatureLicenseUninstallModuleIndex
Description and OID
Status
Access
Chassis module number that the feature license was installed in. This object
can be set to Uninstall the license Key.
current
read-write
1.3.6.1.4.1.6141.2.60.29.1.10.3.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FEATURE-LICENSE-MIB 33-7
wwpLeosPremiumFeatureLicenseUninstallName
Description and OID
Status
Access
This object must be set to a feature name that needs to be uninstalled. The
premium feature name can be obtained from
wwpLeosPremiumFeatureLicenseName MIB object in
wwpLeosPremiumFeatureLicenseInstalledTable.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.29.1.10.3.2
wwpLeosPremiumFeatureLicenseUninstallCommit
Description and OID
current
Setting this object to 'True' starts the Premium License Key uninstallation
specified by the wwpLeosPremiumFeatureLicenseUninstallName onto the slot
specified by wwpLeosPremiumFeatureLicenseUninstallModuleIndex. Get
operation on this object always returns 'False'.
read-write
1.3.6.1.4.1.6141.2.60.29.1.10.3.3
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
wwpLeosPremiumFeatureLicenseStatusNotification
The notification is sent when there was change in operational status of a
premium feature license. Variable bindings include:
wwpLeosPremiumFeatureName and wwpLeosPremiumFeatureOperStatus.
Object Identifier: 1.3.6.1.4.1.6141.2.60.29.2.0.1
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPremiumFeatureLicenseInstallErrorNotification
The notification is sent when there was an unsuccessful installation of a
premium feature license. Variable bindings include:
wwpLeosPremiumFeatureLicenseInstallModuleIndex and
wwpLeosPremiumFeatureLicenseInstallUnsuccessful.
Object Identifier: 1.3.6.1.4.1.6141.2.60.29.2.0.2
Status: current
MIB Reference
009-3220-011 Standard Revision A
August 2013
33-8 WWP-LEOS-FEATURE-LICENSE-MIB
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
MIB Reference
009-3220-011 Standard Revision A
August 2013
34-1
WWP-LEOS-FILE-TRANSFER-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-FILE-TRANSFER-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosFTransferOp
Description and OID
Status
Used to transfer file(s) between a TFTP server (remote) and the device(local). current
All transfers are binary. There are three types of file transfers: -sendFile sends
a file to the host TFTP server. -getFile receives a file from the host server. getCmdFile gets the specified file from the host and parses that file for
additional operations to be performed. This is the mechanism used to upgrade
the device with new software.
Access
read-write
1.3.6.1.4.1.6141.2.60.23.1.1.1
wwpLeosFTransferServerAddr
Description and OID
Status
current
The IP address of the TFTP server from (or to) which to transfer the file.
Address must be a unicast address that is reachable from the agent and no
firewalls or ACLs preventing TFTP datagrams from being transferred.
wwpLeosFTransferServerInetAddr cannot be set at the same time.
This
OID is set to 0.0.0.0 when the server has an IPv6 address,
which is shown
in the wwpLeosFTransferServerInetAddr and the
wwpLeosDnsServerInetAddrType is set to IPv6. For a server with an
IPv4
address, the IP address is shown in this OID and the
wwpLeosFTransferServerInetAddr with the wwpLeosDnsServerInetAddrType
set to IPv4.
Access
read-write
1.3.6.1.4.1.6141.2.60.23.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
34-2 WWP-LEOS-FILE-TRANSFER-MIB
wwpLeosFTransferRemoteFilename
Description and OID
Status
The file name (including the path, if applicable) to be retrieved from the TFTP current
server. If the switch/device is downloading a file, then this should be the name
of the file on the remote server. Length of filename string must not exceed 64
alpha-numeric characters, no spaces in filenames.
Access
read-write
1.3.6.1.4.1.6141.2.60.23.1.1.3
wwpLeosFTransferLocalFilename
Description and OID
Status
Access
The file name (including the path, if applicable) to be written to. If the switch/
device is downloading a file, then this should be the name of the file on the
switch/device. Length of filename string must not exceed 64 alpha-numeric
characters, no spaces in filenames. By default it has the same value as of
wwpLeosFTransferRemoteFilename.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.23.1.1.4
wwpLeosFTransferActivate
Description and OID
Activate the file transfer operation with a value of True(1). The object returns current
to 'false' once the file transfer is completed. Poll wwpLeosFTransferStatus for
current status. Default value is False. wwpLeosFTransferRemoteFileName,
wwpLeosFTransferServerAddress and wwpLeosFTransferOp must be valid
prior to setting this object to True.
read-write
1.3.6.1.4.1.6141.2.60.23.1.1.5
wwpLeosFTransferNotifOnCompletion
Description and OID
Status
Access
read-write
1.3.6.1.4.1.6141.2.60.23.1.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FILE-TRANSFER-MIB 34-3
wwpLeosFTransferStatus
Description and OID
Status
Access
Specifies the state of this file transfer request. If no file transfer request is being current
processed, then the wwpLeosFTransferStatus should be 'idle'.
read-only
1.3.6.1.4.1.6141.2.60.23.1.1.7
wwpLeosFTransferFailCause
Description and OID
Status
Access
The reason why the file transfer operation failed. If no file transfer request is current
being processed, then the wwpLeosFTransferFileCause should be 'noStatus'.
read-only
1.3.6.1.4.1.6141.2.60.23.1.1.8
wwpLeosFTransferNotificationStatus
Description and OID
Status
Access
The status of the file transfer which is to be reported via the FileTransfer
Notification.
current
read-only
Status
Access
The string explaining the error code in detail or the additional info for the file
transfer completion.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.23.1.1.9
wwpLeosFTransferNotificationInfo
1.3.6.1.4.1.6141.2.60.23.1.1.10
wwpLeosFTransferServerInetAddrType
Description and OID
The Inet address type of the TFTP server from (or to) which to transfer the file. current
Used in conjunction with wwpLeosFTransferServerInetAddr. When set to:
ipv4: wwpLeosFTransferServerInetAddr should be compliant with
InetAddressIPv4 from RFC 4001
ipv6: wwpLeosFTransferServerInetAddr
should be compliant with InetAddressIPv6 from RFC 4001
read-write
1.3.6.1.4.1.6141.2.60.23.1.1.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
34-4 WWP-LEOS-FILE-TRANSFER-MIB
wwpLeosFTransferServerInetAddr
Description and OID
Status
current
The Inet address of the TFTP server from (or to) which to transfer the file.
Address must be a unicast address that is reachable from the agent and no
firewalls or ACLs preventing TFTP datagrams from being transferred. This OID
must be used in conjuction with wwpLeosFTransferServerInetAddrType. The
InetAddress set here should be compliant with RFC 4001 InetAddressType.
When this OID is set, wwpLeosFTransferServerAddr is set to 0.0.0.0.
Access
read-write
1.3.6.1.4.1.6141.2.60.23.1.1.12
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
wwpLeosFTransferCompletion
A wwpLeosFTransferCompletion notification is sent at the completion of a file
transfer request. Variable bindings include:
wwpLeosFTransferRemoteFilename, wwpLeosFTransferLocalFilename,
wwpLeosFTransferNotificationStatus, and wwpLeosFTransferNotificationInfo.
Object Identifier: 1.3.6.1.4.1.6141.2.60.23.2.0.1
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
MIB Reference
009-3220-011 Standard Revision A
August 2013
35-1
WWP-LEOS-FILTER-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-FILTER-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosFilterMaxHardwareResources
Description and OID
Status
Access
current
read-only
Status
Access
Specifies the total number of hardware filter resources currently used out of
wwpLeosFilterMaxHardwareResources.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.15.1.1.1.1
wwpLeosFilterUsedHardwareResources
1.3.6.1.4.1.6141.2.60.15.1.1.1.2
wwpLeosFilterCreated
1.3.6.1.4.1.6141.2.60.15.1.1.1.3
wwpLeosFilterCountersMax
1.3.6.1.4.1.6141.2.60.15.1.1.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
35-2 WWP-LEOS-FILTER-MIB
wwpLeosFilterCountersUsed
Description and OID
Status
Access
current
read-only
Status
Access
The (conceptual) table listing the configuration parameters for the protocol
filter.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
The index used in the table. It identifies the unique entry in the table.
current
read-only
Status
Access
current
read-create
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.15.1.1.1.5
wwpLeosFilterTable
1.3.6.1.4.1.6141.2.60.15.1.1.2
wwpLeosFilterEntry
1.3.6.1.4.1.6141.2.60.15.1.1.2.1
wwpLeosFilterIndex
1.3.6.1.4.1.6141.2.60.15.1.1.2.1.1
wwpLeosFilterName
1.3.6.1.4.1.6141.2.60.15.1.1.2.1.2
wwpLeosFilterAdminState
1.3.6.1.4.1.6141.2.60.15.1.1.2.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FILTER-MIB 35-3
wwpLeosFilterOperState
Description and OID
Status
Access
current
read-only
Status
Access
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.15.1.1.2.1.4
wwpLeosFilterCounter
1.3.6.1.4.1.6141.2.60.15.1.1.2.1.5
wwpLeosFilterStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, a manager must set this object to 'destroy'.
read-create
1.3.6.1.4.1.6141.2.60.15.1.1.2.1.6
wwpLeosFilterProtocolTable
Description and OID
Status
current
The (conceptual) table listing the configuration parameters for the filter
protocol table. Multiple Set operation must be performed on this table to create
entries in the table. This table shows all protocols (standard and custom)
configured on the device.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.15.1.1.3
wwpLeosFilterProtocolEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
The protocol filter index used in the table. It uniquely identifies the entry in the current
wwpLeosFilterProtocolTable table.
read-only
1.3.6.1.4.1.6141.2.60.15.1.1.3.1
wwpLeosFilterProtocolIndex
Description and OID
1.3.6.1.4.1.6141.2.60.15.1.1.3.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
35-4 WWP-LEOS-FILTER-MIB
wwpLeosFilterProtocolName
Description and OID
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.15.1.1.3.1.2
wwpLeosFilterProtocolType
1.3.6.1.4.1.6141.2.60.15.1.1.3.1.3
wwpLeosFilterProtocolSrcPort
Description and OID
Specifies the source port associated with this entry. If set to 0 means all ports. current
read-create
1.3.6.1.4.1.6141.2.60.15.1.1.3.1.4
wwpLeosFilterProtocolDstPort
Description and OID
Status
Access
Specifies the destination port associated with this entry. If set to 0 means all
ports.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.15.1.1.3.1.5
wwpLeosFilterProtocolStatus
Description and OID
Used to manage the creation and deletion of the rows in this table. To create current
a row in this table, use the multiple set operation to set all the following objects:
wwpLeosFilterProtocolName, wwpLeosFilterProtocolIp,
wwpLeosFilterProtocolSrcPort, wwpLeosFilterProtocolDstPort,
wwpLeosFilterProtocolStatus. wwpLeosFilterProtocolStatus must be set to
'createandgo' to create entry. To delete an entry, set this object to 'destroy'.
read-create
1.3.6.1.4.1.6141.2.60.15.1.1.3.1.6
wwpLeosFilterMemTable
Description and OID
Status
Access
The table lists the configuration parameters for the filter membership table.
current
not-accessible
1.3.6.1.4.1.6141.2.60.15.1.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FILTER-MIB 35-5
wwpLeosFilterMemEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
Specifies the VLAN associated with this filter. It is also used as index in the
table. If specified as 0, it means all VLANs.
current
read-only
Status
Access
Specifies the port id associated with this filter. It is also used as index in the
table. If wwpLeosFilterPortId is set to 0, it means all ports.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.15.1.1.4.1
wwpLeosFilterVlan
1.3.6.1.4.1.6141.2.60.15.1.1.4.1.1
wwpLeosFilterPortId
1.3.6.1.4.1.6141.2.60.15.1.1.4.1.2
wwpLeosFilterMemStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, set this object to 'destroy'.
read-create
1.3.6.1.4.1.6141.2.60.15.1.1.4.1.3
wwpLeosFilterMemRule
Description and OID
Status
Specifies the rule to apply to this filter-vlan-port member -- block traffic or allow current
traffic. This object has a default value of block.
Access
read-create
1.3.6.1.4.1.6141.2.60.15.1.1.4.1.4
wwpLeosFilterProtocolMemTable
Description and OID
Status
Access
The (conceptual) table listing the configuration parameters for the filterprotocol membership table.
current
not-accessible
1.3.6.1.4.1.6141.2.60.15.1.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
35-6 WWP-LEOS-FILTER-MIB
wwpLeosFilterProtocolMemEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.15.1.1.5.1
wwpLeosFilterProtocolMemStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, a manager must set this object to 'destroy'.
read-create
1.3.6.1.4.1.6141.2.60.15.1.1.5.1.1
wwpLeosFilterStatsTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
The number of packets that matched any protocol or member associated with current
this filter. This includes dropped and/or forwarded packets.
read-only
1.3.6.1.4.1.6141.2.60.15.1.1.6
wwpLeosFilterStatsEntry
1.3.6.1.4.1.6141.2.60.15.1.1.6.1
wwpLeosFilterDropBytes
Description and OID
1.3.6.1.4.1.6141.2.60.15.1.1.6.1.1
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-1
WWP-LEOS-FLOW-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-FLOW-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosFlowAgeTime
Description and OID
Status
Access
Specifies the age time after which MAC entries are flushed out.
current
read-write
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.6.1.1.1
wwpLeosFlowAgeTimeState
1.3.6.1.4.1.6141.2.60.6.1.1.2
wwpLeosFlowServiceLevelTable
Description and OID
current
A table of flow service level entries. Following criteria must be met while
creating entry in the table: - All indexes must be specified wwpLeosFlowServiceLevelCirBW and wwpLeosFlowServiceLevelPirBW
must be set. - wwpLeosFlowServiceLevelStatus must be set to create and go.
not-accessible
1.3.6.1.4.1.6141.2.60.6.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-2 WWP-LEOS-FLOW-MIB
wwpLeosFlowServiceLevelEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
Port ID used as index in the service level entry. If it is intended to not specify
the port ID in the index, this value should be set to 0.
current
read-only
Status
Access
current
read-only
Status
Access
The flow service level name associated with this service level.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.6.1.1.3.1
wwpLeosFlowServiceLevelDirection
1.3.6.1.4.1.6141.2.60.6.1.1.3.1.1
wwpLeosFlowServiceLevelPort
1.3.6.1.4.1.6141.2.60.6.1.1.3.1.2
wwpLeosFlowServiceLevelId
1.3.6.1.4.1.6141.2.60.6.1.1.3.1.3
wwpLeosFlowServiceLevelName
1.3.6.1.4.1.6141.2.60.6.1.1.3.1.4
wwpLeosFlowServiceLevelPriority
Description and OID
The internal traffic-queue priority. This may also be used as a weighting factor. current
read-create
1.3.6.1.4.1.6141.2.60.6.1.1.3.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-3
wwpLeosFlowServiceLevelQueueSize
Description and OID
Status
The size of the traffic queue provisioned for this service level entry. This may current
also be referred to as latency tolerance.
Access
read-create
1.3.6.1.4.1.6141.2.60.6.1.1.3.1.6
wwpLeosFlowServiceLevelDropEligibility
Description and OID
Status
Access
current
read-create
Status
Access
This item is used to indicate whether a service level may be shared among
entries in the flow service-mapping table.
current
read-create
Status
Access
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.6.1.1.3.1.7
wwpLeosFlowServiceLevelShareEligibility
1.3.6.1.4.1.6141.2.60.6.1.1.3.1.8
wwpLeosFlowServiceLevelCirBW
1.3.6.1.4.1.6141.2.60.6.1.1.3.1.9
wwpLeosFlowServiceLevelPirBW
Description and OID
The peak information rate (maximum bandwidth) in Kbps associated with this current
service level entry.
read-create
1.3.6.1.4.1.6141.2.60.6.1.1.3.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-4 WWP-LEOS-FLOW-MIB
wwpLeosFlowServiceStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. In particular, a
newly created row cannot be made active until one of the following instances
have been set: -wwpLeosFlowServiceLevelCirBW wwpLeosFlowServiceLevelPirBW.
Access
read-create
1.3.6.1.4.1.6141.2.60.6.1.1.3.1.11
wwpLeosFlowServiceRedCurveId
Description and OID
Status
current
This object is used to specify the RED curve index to be used for the given
service level. If this OID is not specified, the system uses the default value of
this object which is dependent on the queue size
wwpLeosFlowServiceLevelQueueSize
Access
read-create
1.3.6.1.4.1.6141.2.60.6.1.1.3.1.12
wwpLeosFlowServiceLevelQueueSizeYellow
Description and OID
Status
The size of the yellow traffic queue provisioned for this service level entry. Also current
known as the discard preferred queue size.
Access
read-create
1.3.6.1.4.1.6141.2.60.6.1.1.3.1.13
wwpLeosFlowServiceLevelQueueSizeRed
Description and OID
Status
The size of the RED traffic queue provisioned for this service level entry. Also current
known as the discard wanted queue size
Access
read-create
1.3.6.1.4.1.6141.2.60.6.1.1.3.1.14
wwpLeosFlowServiceLevelFlowGroup
Description and OID
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.6.1.1.3.1.15
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-5
wwpLeosFlowServiceMappingTable
Description and OID
Status
Access
not-accessible
1.3.6.1.4.1.6141.2.60.6.1.1.4
wwpLeosFlowServiceMappingEntry
Description and OID
Status
Access
deprecated
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.6.1.1.4.1
wwpLeosFlowServiceMapVid
Description and OID
The VLAN ID associated with this service mapping entry. If this object is set to deprecated
0, then this object should be ignored while creating the service-mapping entry.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.4.1.1
wwpLeosFlowServiceMapSrcPort
Description and OID
Status
The source port ID for the instance. This represents the ingress location of a deprecated
flow. This port ID should refer to the dot1dBasePort in the
Dot1dBasePortEntry. If this object is set to 0, then this object should be ignored
while creating the service-mapping entry.
Access
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.4.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-6 WWP-LEOS-FLOW-MIB
wwpLeosFlowServiceMapSrcTag
Description and OID
Status
The source VLAN tag associated with this service mapping entry. If this object deprecated
is set to 0, then this object should be ignored while creating the servicemapping entry.
Access
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.4.1.3
wwpLeosFlowServiceMapDstPort
Description and OID
Status
The destination port ID for the instance. This represents the egress location for deprecated
a flow. This port ID should refer to the dot1dBasePort in the
Dot1dBasePortEntry. If this object is set to 0, then this object should be ignored
while creating the service-mapping entry.
Access
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.4.1.4
wwpLeosFlowServiceMapDstTag
Description and OID
Status
The destination VLAN tag associated with this service mapping entry. If this deprecated
object is set to 0, then this object should be ignored while creating the servicemapping entry.
Access
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.4.1.5
wwpLeosFlowServiceMapSrcPri
Description and OID
Status
deprecated
The incoming packet vlan tag priority on the
wwpLeosFlowServiceMapSrcPort. The 802.1p packet priority valid values are
only from 0 to 7. If this object is set to 255 (or signed 8-bit integer -1), then this
object should be ignored while creating the service-mapping entry.
Access
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.4.1.6
wwpLeosFlowServiceMapProtocolType
Description and OID
Status
The Layer 4 protocol type used as index in the table. This corresponds to the deprecated
TCP or UDP protocol. If this object is set to 1, then this object should be
ignored while creating the service-mapping entry.
Access
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.4.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-7
wwpLeosFlowServiceMapProtocolPortNum
Description and OID
Status
The Layer 4 protocol port number used as index in the table. This corresponds deprecated
to a TCP or UDP port number. If this object is set to 0, then this object should
be ignored while creating the service-mapping entry.
Access
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.4.1.8
wwpLeosFlowServiceMapDstSlidId
Description and OID
Status
The service level ID to apply to the flow at egress. If this object is set to 0, then deprecated
this object should be ignored while creating the service-mapping entry.
Access
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.4.1.9
wwpLeosFlowServiceMapSrcSlidId
Description and OID
Status
The service level ID to apply to the flow at ingress. If this object is set to 0, then deprecated
this object should be ignored while creating the service-mapping entry.
Access
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.4.1.10
wwpLeosFlowServiceMapPriRemarkStatus
Description and OID
Status
Access
Setting this object to 'true' enables remarking of the VLAN tag priority for
frames that match the classification defined by this service-mapping entry.
deprecated
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.6.1.1.4.1.11
wwpLeosFlowServiceMapRemarkPri
Description and OID
The remark priority value. For frames that match the classification defined by deprecated
this service-mapping entry, the VLAN tag priority will be remarked with this
value.
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.4.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-8 WWP-LEOS-FLOW-MIB
wwpLeosFlowServiceMapStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. deprecated
To create a row in this table, set this object to 'createAndGo'.
Access
read-create
1.3.6.1.4.1.6141.2.60.6.1.1.4.1.13
wwpLeosFlowServiceACTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
Port ID for the instance. This port ID should refer to the dot1dBasePort in the current
Dot1dBasePortEntry. Used as index in service access table.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.5
wwpLeosFlowServiceACEntry
1.3.6.1.4.1.6141.2.60.6.1.1.5.1
wwpLeosFlowServiceACPortId
Description and OID
1.3.6.1.4.1.6141.2.60.6.1.1.5.1.1
wwpLeosFlowServiceACVid
Description and OID
Status
Access
current
The VLAN ID associated with this access control entry. Used as index in
service access table. If the platform supports only port-based service access
control, this value should be set to 0.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.5.1.2
wwpLeosFlowServiceACMaxDynamicMacCount
Description and OID
Status
Access
The maximum number of dynamic MAC Addresses that can be learned and
authorized by this access control entry. This value should default to 24.
current
read-create
1.3.6.1.4.1.6141.2.60.6.1.1.5.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-9
wwpLeosFlowServiceACDynamicNonFilteredMacCount
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.6.1.1.5.1.4
wwpLeosFlowServiceACDynamicFilteredMacCount
1.3.6.1.4.1.6141.2.60.6.1.1.5.1.5
wwpLeosFlowServiceACStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'.
read-create
1.3.6.1.4.1.6141.2.60.6.1.1.5.1.7
wwpLeosFlowServiceACForwardLearning
Description and OID
Status
Access
current
read-create
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.6.1.1.5.1.50
wwpLeosFlowStaticMacTable
1.3.6.1.4.1.6141.2.60.6.1.1.6
wwpLeosFlowStaticMacEntry
1.3.6.1.4.1.6141.2.60.6.1.1.6.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-10 WWP-LEOS-FLOW-MIB
wwpLeosFlowSMVid
Description and OID
Status
Access
The service network ID associated with this entry. Used as index in static MAC current
table.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.6.1.1
wwpLeosFlowSMMacAddr
Description and OID
Status
Access
A unicast MAC address to be statically configured. Used as index in static MAC current
table.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.6.1.2
wwpLeosFlowSMPortId
Description and OID
Status
Access
Port ID for the static MAC instance. This port ID should refer to the
dot1dBasePort in the Dot1dBasePortEntry.
current
read-create
Status
Access
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.6.1.1.6.1.3
wwpLeosFlowSMTag
1.3.6.1.4.1.6141.2.60.6.1.1.6.1.4
wwpLeosFlowSMStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. In particular, a
newly created row cannot be made active until the corresponding instances of
wwpLeosFlowSMPortId and wwpLeosFlowSMTag have been set.
The
following objects may not be modified while the
value of this object is
active(1): -wwpLeosFlowSMPortId -wwpLeosFlowSMTag
read-create
1.3.6.1.4.1.6141.2.60.6.1.1.6.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-11
wwpLeosFlowLearnTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
The address associated with this flow learn entry. Address can be layer 2 MAC current
address or layer 3 IP address. If address is layer 3 IP address then first two
bytes are 0.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.7
wwpLeosFlowLearnEntry
1.3.6.1.4.1.6141.2.60.6.1.1.7.1
wwpLeosFlowLearnVid
1.3.6.1.4.1.6141.2.60.6.1.1.7.1.1
wwpLeosFlowLearnAddr
Description and OID
1.3.6.1.4.1.6141.2.60.6.1.1.7.1.2
wwpLeosFlowLearnSrcPort
Description and OID
Status
Access
Source port ID for the instance. This port ID should refer to the dot1dBasePort current
in the Dot1dBasePortEntry.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.7.1.3
wwpLeosFlowLearnSrcTag
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.7.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-12 WWP-LEOS-FLOW-MIB
wwpLeosFlowLearnSrcPri
Description and OID
Status
Access
current
read-only
Status
Access
The address type associated with this flow-learn entry. Address can be layer 2 current
type or layer 3 type.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.7.1.5
wwpLeosFlowLearnAddrType
Description and OID
1.3.6.1.4.1.6141.2.60.6.1.1.7.1.6
wwpLeosFlowLearnDstPort
Description and OID
Status
Access
Destination port ID associated with this flow-learn entry. This port ID should
refer to the dot1dBasePort in the Dot1dBasePortEntry.
current
read-only
Status
Access
current
read-only
Status
Access
This object indicates whether the device was learned dynamically or entered
as a static MAC.
current
read-only
Status
Access
This object indicates whether the flow-learn entry is filtered. A value of 'true'
indicates the flow-learn entry is filtered.
current
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.7.1.7
wwpLeosFlowLearnDstTag
1.3.6.1.4.1.6141.2.60.6.1.1.7.1.8
wwpLeosFlowLearnType
1.3.6.1.4.1.6141.2.60.6.1.1.7.1.9
wwpLeosFlowLearnIsFiltered
1.3.6.1.4.1.6141.2.60.6.1.1.7.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-13
wwpLeosFlowServiceStatsTable
Description and OID
Status
Access
deprecated
not-accessible
Status
Access
deprecated
not-accessible
Status
Access
The number of bytes received for this flow service entry. This counter
represents the upper 32 bits of the counter value.
deprecated
read-only
Status
Access
The number of bytes received for this flow service entry. This counter
represents the lower 32 bits of the counter value.
deprecated
read-only
Status
Access
The number of bytes transmitted for this flow service entry. This counter
represents the upper 32 bits of the counter value.
deprecated
read-only
Status
Access
The number of bytes transmitted for this flow service entry. This counter
represents the lower 32 bits of the counter value.
deprecated
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.8
wwpLeosFlowServiceStatsEntry
1.3.6.1.4.1.6141.2.60.6.1.1.8.1
wwpLeosFlowServiceStatsRxHi
1.3.6.1.4.1.6141.2.60.6.1.1.8.1.1
wwpLeosFlowServiceStatsRxLo
1.3.6.1.4.1.6141.2.60.6.1.1.8.1.2
wwpLeosFlowServiceStatsTxHi
1.3.6.1.4.1.6141.2.60.6.1.1.8.1.3
wwpLeosFlowServiceStatsTxLo
1.3.6.1.4.1.6141.2.60.6.1.1.8.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-14 WWP-LEOS-FLOW-MIB
wwpLeosFlowServiceStatsType
Description and OID
Status
Access
This object specifies the type of statistics for the given entry.
deprecated
read-write
Status
Access
A flow MAC-find table. MAC address must be specified to walk through the
MIB.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This variable defines the mac address used as index in the MAC-find table.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.8.1.5
wwpLeosFlowMacFindTable
1.3.6.1.4.1.6141.2.60.6.1.1.9
wwpLeosFlowMacFindEntry
1.3.6.1.4.1.6141.2.60.6.1.1.9.1
wwpLeosFlowMacFindMacAddr
1.3.6.1.4.1.6141.2.60.6.1.1.9.1.1
wwpLeosFlowMacFindVlanId
1.3.6.1.4.1.6141.2.60.6.1.1.9.1.2
wwpLeosFlowMacFindPort
1.3.6.1.4.1.6141.2.60.6.1.1.9.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-15
wwpLeosFlowMacFindVlanTag
Description and OID
Status
Access
This specifies the VLAN tag on which this MAC address is learned.
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.9.1.4
wwpLeosFlowPriRemapTable
1.3.6.1.4.1.6141.2.60.6.1.1.10
wwpLeosFlowPriRemapEntry
1.3.6.1.4.1.6141.2.60.6.1.1.10.1
wwpLeosFlowUserPri
1.3.6.1.4.1.6141.2.60.6.1.1.10.1.1
wwpLeosFlowRemappedPri
1.3.6.1.4.1.6141.2.60.6.1.1.10.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-16 WWP-LEOS-FLOW-MIB
wwpLeosFlowSMappingTable
Description and OID
Status
A service mapping entry in the service-mapping table. To create entry in this current
table the following criteria must be met. The indexes to the service mapping
entry consist of type-value pairs. There are four(4) sections to the entry. NETWORK
(type / value) -SOURCE
(type / value) -DESTINATION
(type / value) -CLASS OF SERVICE (type / value) All indexes must be
specified with the appropriately enumerated type. If the TYPE is set to 'none',
the corresponding VALUE MUST be set to zero(0). The service-mapping entry
is very generic. As such, acceptable combinations of types and values are
scrutinized by the running platform.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.6.1.1.13
wwpLeosFlowSMappingEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
This object specifies the NETWORK object TYPE for the entry. If set to 'none', current
the corresponding value in wwpLeosFlowSMappingNetValue MUST be
zero(0). If set to vlan, a valid VLAN ID must be specified. If set to vsi, a valid
ethernet virtual-switch-instance ID must be specified. If set to vsi_mpls, a valid
mpls virtual-switch-instance ID must be specified. This object is used as an
index in the table.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.13.1
wwpLeosFlowSMappingNetType
Description and OID
1.3.6.1.4.1.6141.2.60.6.1.1.13.1.1
wwpLeosFlowSMappingNetValue
Description and OID
Status
Access
This object specifies the NETWORK object ID for the entry. This item must be current
set according to the value set in wwpLeosFlowSMappingNetType. If
wwpLeosFlowSMappingNetType equals: -none(1): MUST be set to zero(0). vlan(2): MUST be set to valid existing vlan ID. -vsi(3): MUST be set to valid
existing ethernet virtual switch ID. -vsiMpls(4): MUST be set to valid existing
mpls virtual switch ID. This object is used as an index in the table.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.13.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-17
wwpLeosFlowSMappingSrcType
Description and OID
Status
Access
This object specifies the SOURCE object TYPE for the entry. If set to 'none', current
the corresponding value in wwpLeosFlowSMappingSrcValue MUST be
zero(0). If set to port, a valid port group ID must be specified. If set to mplsVc,
a valid mpls-virtual-circuit ID must be specified. This object is used as an index
in the table.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.13.1.3
wwpLeosFlowSMappingSrcValue
Description and OID
Status
Access
This object specifies the SOURCE object ID for the entry. This item must be current
set according to the value set in wwpLeosFlowSMappingSrcType. If
wwpLeosFlowSMappingSrcType equals: -none(1): MUST be set to zero(0). port(2): MUST be set to valid existing port group ID. -mplsVc(3): MUST be set
to valid existing mpls-virtual-circuit ID. This object is used as an index in the
table.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.13.1.4
wwpLeosFlowSMappingDstType
Description and OID
Status
Access
current
This object specifies the DESTINATION object TYPE for the entry. If set to
'none', the corresponding value in wwpLeosFlowSMappingDstValue MUST be
zero(0). If set to port, a valid port group ID must be specified. If set to mplsVc,
a valid mpls-virtual-circuit ID must be specified. This object is used as an index
in the table.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.13.1.5
wwpLeosFlowSMappingDstValue
Description and OID
Status
Access
This object specifies the DESTINATION object ID for the entry. This item must current
be set according to the value set in wwpLeosFlowSMappingDstType. If
wwpLeosFlowSMappingDstType equals: -none(1): MUST be set to zero(0). port(2): MUST be set to valid existing port group ID. -mplsVc(3): MUST be set
to valid existing mpls-virtual-circuit ID. This object is used as an index in the
table.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.13.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-18 WWP-LEOS-FLOW-MIB
wwpLeosFlowSMappingCosType
Description and OID
Status
Access
This object specifies the CLASS OF SERVICE object TYPE for the entry. If set current
to 'none', the corresponding value in wwpLeosFlowSMappingCosValue MUST
be zero(0). If set to tcpSrcPort, tcpDstPort, udpSrcPort, or udpDstPort, a valid,
NON-ZERO TCP or UDP port must be specified. If set to phb, a valid per-hopbehavior enumeration must be specified. If set to dscp, a valid differentiated
services code point must be specified. If set to ipPrec, a valid ip-precedence
must be specified. If set to dot1dPri, a valid 802.1d/p priority must be specified.
If set to cvlan, a support Customer VLAN must be specified. This object is used
as an index in the table.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.13.1.7
wwpLeosFlowSMappingCosValue
Description and OID
Status
Access
This object specifies the CLASS OF SERVICE object ID for the entry. This item current
must be set according to the value set in wwpLeosFlowSMappingCosType. If
wwpLeosFlowSMappingCosType equals: -none(1): MUST be set to zero(0). phb(2): (1..13) --cs0(1),cs1(2),cs2(3),cs3(4),cs4(5),cs5(6),cs6(7),cs7(8), -af1(9),af2(10),af3(11),af4(12),ef(13) -dscp(3): (0..63) -ipPrec(4): (0..7) dot1dPri(5): (0..7) -mplsExp(6): (0..7) -tcpSrcPort(7): (1..65535). tcpDstPort(8): (1..65535). -udpSrcPort(9): (1..65535). udpDstPort(10):(1..65535). -cvlan(12): (1..4094) Depending on the platform,
the COS type/value may be recognized for certain frame tag-structures. For
example, some platforms can recognize ipPrec, dscp dot1dPri only for doubletagged frames. Some require untagged or single-tagged frames to recognize
TCP/UDP ports. Operator should consult the software configuration guide for
the specified product. This object is used as an index in the table.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.13.1.8
wwpLeosFlowSMappingDstSlid
Description and OID
Status
The service level ID to apply to the flow at the destination point. Depending on current
the platform this object may or may not be set to 0 while creating the servicemapping entry. The corresponding destination-port and slid must exist in the
service-level table.
Access
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.13.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-19
wwpLeosFlowSMappingSrcSlid
Description and OID
Status
The service level ID to apply to the flow at the source-port. Depending on the current
platform this object may or may not be set to 0 while creating the servicemappingentry. The corresponding source-port and SLID must exist in the
service-level table
Access
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.13.1.10
wwpLeosFlowSMappingStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'.
Access
read-create
1.3.6.1.4.1.6141.2.60.6.1.1.13.1.11
wwpLeosFlowSMappingRedCurveOffset
Description and OID
Status
current
This object specifies the RED curve offset to be used for a given service
mapping. If this object is not set then the device chooses the default RED curve
offset which is 0.
Access
read-create
1.3.6.1.4.1.6141.2.60.6.1.1.13.1.12
wwpLeosFlowSMappingCpuPort
Description and OID
Status
Access
This object specifies if the CPU port is to be used as the src port.
current
read-create
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.6.1.1.13.1.13
wwpLeosFlowSMappingStatsTable
1.3.6.1.4.1.6141.2.60.6.1.1.14
wwpLeosFlowSMappingStatsEntry
1.3.6.1.4.1.6141.2.60.6.1.1.14.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-20 WWP-LEOS-FLOW-MIB
wwpLeosFlowSMappingStatsRxHi
Description and OID
Status
Access
The number of bytes received for this flow service entry. This counter
represents the upper 32 bits of the counter value.
current
read-only
Status
Access
The number of bytes received for this flow service entry. This counter
represents the lower 32 bits of the counter value.
current
read-only
Status
Access
The number of bytes transmitted for this flow service entry. This counter
represents the upper 32 bits of the counter value.
current
read-only
Status
Access
The number of bytes transmitted for this flow service entry. This counter
represents the lower 32 bits of the counter value.
current
read-only
Status
Access
current
read-write
Status
Access
A table of flow CoS sync dot1d to exp entries. Entries cannot be created or
destroyed.
current
not-accessible
1.3.6.1.4.1.6141.2.60.6.1.1.14.1.1
wwpLeosFlowSMappingStatsRxLo
1.3.6.1.4.1.6141.2.60.6.1.1.14.1.2
wwpLeosFlowSMappingStatsTxHi
1.3.6.1.4.1.6141.2.60.6.1.1.14.1.3
wwpLeosFlowSMappingStatsTxLo
1.3.6.1.4.1.6141.2.60.6.1.1.14.1.4
wwpLeosFlowSMappingStatsType
1.3.6.1.4.1.6141.2.60.6.1.1.14.1.5
wwpLeosFlowCosSync1dToExpTable
1.3.6.1.4.1.6141.2.60.6.1.1.15
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-21
wwpLeosFlowCosSync1dToExpEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
This object is used as index in the table and represents CoS dot1d priority. Any current
frame coming in with this priority aresynchronized with the priority specified by
wwpLeosFlowCosSync1dToExpMapTo.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.15.1
wwpLeosFlowCosSync1dToExpMapFrom
Description and OID
1.3.6.1.4.1.6141.2.60.6.1.1.15.1.1
wwpLeosFlowCosSync1dToExpMapTo
Description and OID
Status
This object specifies the remapped exp value of the frame that ingresses with current
dot1d priority of wwpLeosFlowCosSync1dToExpMapFrom.
Access
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.15.1.2
wwpLeosFlowCosSyncExpTo1dTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This object is used as index in the table and represents CoS dot1d priority. Any current
frame coming in with this priority aresynchronized with the priority specified by
wwpLeosFlowCosSyncExpTo1dMapTo.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.16
wwpLeosFlowCosSyncExpTo1dEntry
1.3.6.1.4.1.6141.2.60.6.1.1.16.1
wwpLeosFlowCosSyncExpTo1dMapFrom
Description and OID
1.3.6.1.4.1.6141.2.60.6.1.1.16.1.1
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-22 WWP-LEOS-FLOW-MIB
wwpLeosFlowCosSyncExpTo1dMapTo
Description and OID
Status
This object specifies the remapped exp value of the frame that ingresses with current
dot1d priority of wwpLeosFlowCosSyncExpTo1dMapFrom.
Access
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.16.1.2
wwpLeosFlowCosSyncIpPrecTo1dTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This object is used as index in the table and represents IP precedence value. current
Any frame coming in with wwpLeosFlowCosSyncIpPrecTo1dMapFrom IP
precedence are synchronized with dot1d specified by
wwpLeosFlowCosSyncIpPrecTo1dMapTo.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.17
wwpLeosFlowCosSyncIpPrecTo1dEntry
1.3.6.1.4.1.6141.2.60.6.1.1.17.1
wwpLeosFlowCosSyncIpPrecTo1dMapFrom
Description and OID
1.3.6.1.4.1.6141.2.60.6.1.1.17.1.1
wwpLeosFlowCosSyncIpPrecTo1dMapTo
Description and OID
Status
Access
This object specifies the IP precedence value to synchronize with when the
frame ingresses with ip precedence value of
wwpLeosFlowCosSyncIpPrecTo1dMapFrom.
current
read-write
Status
Access
A table of flow CoS sync standard per hop behavior to dot1d or Exp entries.
current
not-accessible
1.3.6.1.4.1.6141.2.60.6.1.1.17.1.2
wwpLeosFlowCosSyncStdPhbTo1dTable
1.3.6.1.4.1.6141.2.60.6.1.1.18
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-23
wwpLeosFlowCosSyncStdPhbTo1dEntry
Description and OID
Status
Access
A flow CoS sync standard per hop behavior to dot1d entry in the
wwpLeosFlowCosSyncStdPhbTo1dTable.
current
not-accessible
Status
Access
This object is used as index in the table and represents AFx or EF value. Any current
frame coming in with wwpLeosFlowCosSyncStdPhbTo1dMapFrom AFx or EF
value are synchronized with dot1d priority specified by
wwpLeosFlowCosSyncStdPhbTo1dMapTo. If
wwpLeosFlowCosSyncStdPhbTo1dValue is not specified then no
synchronization occurs.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.18.1
wwpLeosFlowCosSyncStdPhbTo1dMapFrom
Description and OID
1.3.6.1.4.1.6141.2.60.6.1.1.18.1.1
wwpLeosFlowCosSyncStdPhbTo1dMapTo
Description and OID
Status
Access
This object specifies the AFx or EF dscp value to synchronize with when the
frame ingresses with AFx or EF dscp value of
wwpLeosFlowCosSyncDscpTo1dMapTo.
current
read-write
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.6.1.1.18.1.2
wwpLeosFlowL2SacTable
1.3.6.1.4.1.6141.2.60.6.1.1.19
wwpLeosFlowL2SacEntry
1.3.6.1.4.1.6141.2.60.6.1.1.19.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-24 WWP-LEOS-FLOW-MIB
wwpLeosFlowL2SacPortId
Description and OID
Status
Access
This object is index in the table. If port is not involved in L2 SAC then set this current
value to 0. 0 represents don't care.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.19.1.1
wwpLeosFlowL2SacNetType
Description and OID
Status
Access
current
This object is used as index in the table. This object specifies how
wwpLeosFlowSacValue should be interpreted. If this object is set to none then
the wwpLeosFlowSacValue must be set to 0.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.19.1.2
wwpLeosFlowSacNetValue
Description and OID
Status
Access
This object is used as index in the table. This object is only meaningful if
wwpLeosFlowL2SacNetType is not set to none.
current
read-only
Status
Access
This object specifies the l2 SAC limit. The device does not learn any MAC
greater than the limit specified by this object.
current
read-create
Status
Access
This object specifies the current mac count for the given L2 SAC entry.
current
read-only
Status
Access
This object specifies the current number of filtered MACs for the given L2 SAC current
entry.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.19.1.3
wwpLeosFlowL2SacLimit
1.3.6.1.4.1.6141.2.60.6.1.1.19.1.4
wwpLeosFlowL2SacCurMac
1.3.6.1.4.1.6141.2.60.6.1.1.19.1.5
wwpLeosFlowL2SacCurFilteredMac
Description and OID
1.3.6.1.4.1.6141.2.60.6.1.1.19.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-25
wwpLeosFlowL2SacOperState
Description and OID
Status
Access
This object specifies the current operational state for the given L2 SAC entry. current
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.19.1.7
wwpLeosFlowL2SacRowStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'.
Access
read-create
1.3.6.1.4.1.6141.2.60.6.1.1.19.1.8
wwpLeosFlowL2SacTrapState
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.6.1.1.20
wwpLeosFlowStrictQueuingState
1.3.6.1.4.1.6141.2.60.6.1.1.21
wwpLeosFlowBwCalcMode
Description and OID
Specifies whether the device should operate in transport or payload mode. In current
transport mode the frame length of an Ethernet frame used in measuring CIR
is from IFG through FCS. In payload mode the frame length of an Ethernet
frame used in measuring CIR is from the MAC DA through FCS.
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.22
wwpLeosFlowServiceLevelFlowGroupState
Description and OID
Status
Access
This object specifies the current state of service level flow groups.
current
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.23.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-26 WWP-LEOS-FLOW-MIB
wwpLeosFlowServiceMappingCosRedMappingState
Description and OID
Status
This object specifies the current state of service mapping dot1d to RED offset current
mapping table(wwpLeosFlowCos1dToRedCurveOffsetTable). If this object is
set to disable, wwpLeosFlowCos1dToRedCurveOffsetTable is not used for
dot1d to RED offset mapping else it is used.
Access
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.23.2
wwpLeosFlowServiceAllRedCurveUnset
Description and OID
Status
Access
current
read-write
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.23.3
wwpLeosFlowServiceRedCurveTable
1.3.6.1.4.1.6141.2.60.6.1.1.24
wwpLeosFlowServiceRedCurveEntry
1.3.6.1.4.1.6141.2.60.6.1.1.24.1
wwpLeosFlowServiceRedCurveIndex
1.3.6.1.4.1.6141.2.60.6.1.1.24.1.1
wwpLeosFlowServiceRedCurveName
1.3.6.1.4.1.6141.2.60.6.1.1.24.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-27
wwpLeosFlowServiceRedCurveState
Description and OID
Status
This object specifies the current state of the RED curve. This object can be set current
to enable or disable.
Access
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.24.1.3
wwpLeosFlowServiceRedCurveMinThreshold
Description and OID
Status
current
This represents the minimum threshold in KBytes. When the queue length
associated with this service reaches this number, RED begins to drop packets
matching this Service-Mappings traffic classification. The valid range is
between 0 and 65535 Kbytes. The actual number varies depending on the
platform.
Access
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.24.1.4
wwpLeosFlowServiceRedCurveMaxThreshold
Description and OID
Status
Access
This represents the maximum threshold in KBytes. When the queue length
associated with this service reaches this number, RED drops packets
matching this Service-Mappings traffic classification at the rate specified in
wwpLeosFlowServiceRedCurveDropProbability.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.6.1.1.24.1.5
wwpLeosFlowServiceRedCurveDropProbability
Description and OID
This object specifies the drop probability of a packet (matching this Service- current
Mapping classification) being dropped when the queue length associated with
this Service-Level reaches the value configured in
wwpLeosFlowServiceMaxThreshold. The value represents a percentage (0100).
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.24.1.6
wwpLeosFlowServiceRedCurveUnset
Description and OID
Status
Access
Setting this object to true resets the RED curve settings to factory defaults.
current
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.24.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-28 WWP-LEOS-FLOW-MIB
wwpLeosFlowCos1dToRedCurveOffsetTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This object is used as index in the table and represents CoS dot1d priority. Any current
frame coming in with this priority is mapped to RED CoS offset value specified
by wwpLeosFlowCos1dToRedCurveOffsetValue.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.25
wwpLeosFlowCos1dToRedCurveOffsetEntry
1.3.6.1.4.1.6141.2.60.6.1.1.25.1
wwpLeosFlowCos1dToRedCurveOffset1dValue
Description and OID
1.3.6.1.4.1.6141.2.60.6.1.1.25.1.1
wwpLeosFlowCos1dToRedCurveOffsetValue
Description and OID
Status
Access
This object specifies the RED curve offset value to be used when frame that
ingresses with dot1d priority specified by
wwpLeosFlowCos1dToRedCurveOffset1dValue.
current
read-write
Status
Access
current
not-accessible
Status
Access
A flow CoS sync standard per hop behavior to dot1d entry in the
wwpLeosFlowCosSyncStdPhbTo1dTable.
current
not-accessible
1.3.6.1.4.1.6141.2.60.6.1.1.25.1.2
wwpLeosFlowCosMapPCPTo1dTable
1.3.6.1.4.1.6141.2.60.6.1.1.26
wwpLeosFlowCosMapPCPTo1dEntry
1.3.6.1.4.1.6141.2.60.6.1.1.26.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-29
wwpLeosFlowCosMapPCPTo1dMapFrom
Description and OID
Status
Access
This object is used as index in the table and represents PCP priority. Any frame current
coming in with wwpLeosFlowCosMapPCPTo1dMapFrom priority is mapped to
.1d priority specified by wwpLeosFlowCosMapPCPTo1dMapTo.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.26.1.1
wwpLeosFlowCosMapPCPTo1dMapTo
Description and OID
Status
This object specifies the .1d priority to map with when the frame ingresses with current
PCP priority specified by wwpLeosFlowCosMapPCPTo1dMapFrom.
Access
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.26.1.2
wwpLeosFlowCosMap1dToPCPTable
Description and OID
Status
Access
current
not-accessible
Status
Access
A flow CoS sync standard per hop behavior to dot1d entry in the
wwpLeosFlowCosSyncStdPhbTo1dTable.
current
not-accessible
Status
Access
This object is used as index in the table and represents PCP priority. Any frame current
coming in with wwpLeosFlowCosMap1dToPCPMapFrom priority is mapped to
.1d priority specified by wwpLeosFlowCosMap1dToPCPMapTo.
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.27
wwpLeosFlowCosMap1dToPCPEntry
1.3.6.1.4.1.6141.2.60.6.1.1.27.1
wwpLeosFlowCosMap1dToPCPMapFrom
Description and OID
1.3.6.1.4.1.6141.2.60.6.1.1.27.1.1
wwpLeosFlowCosMap1dToPCPMapTo
Description and OID
Status
This object specifies the dot1d priority to map with when the frame ingresses current
with PCP priority specified by wwpLeosFlowCosMap1dToPCPMapFrom.
Access
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.27.1.2
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-30 WWP-LEOS-FLOW-MIB
wwpLeosFlowMacMotionEventsEnable
Description and OID
Status
Access
Specifies whether MAC Motion traps and syslog messages are generated
when a MAC shifts from one port/vlan to another port/vlan.
current
read-write
Status
Access
The minimum time in seconds that must elapse between each MAC Motion
trap and syslog message that is generated.
current
read-write
Status
Access
current
read-write
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.6.1.1.28
wwpLeosFlowMacMotionEventsInterval
1.3.6.1.4.1.6141.2.60.6.1.1.29
wwpLeosFlowCpuRateLimitsEnable
1.3.6.1.4.1.6141.2.60.6.1.1.30
wwpLeosFlowCpuRateLimitTable
1.3.6.1.4.1.6141.2.60.6.1.1.31
wwpLeosFlowCpuRateLimitEntry
1.3.6.1.4.1.6141.2.60.6.1.1.31.1
wwpLeosFlowCpuRateLimitPort
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-31
wwpLeosFlowCpuRateLimitEnable
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.2
wwpLeosFlowCpuRateLimitBootp
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.3
wwpLeosFlowCpuRateLimitCfm
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.4
wwpLeosFlowCpuRateLimitCft
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.5
wwpLeosFlowCpuRateLimitDot1x
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.6
wwpLeosFlowCpuRateLimitOam
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-32 WWP-LEOS-FLOW-MIB
wwpLeosFlowCpuRateLimitEprArp
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.8
wwpLeosFlowCpuRateLimitIgmp
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.9
wwpLeosFlowCpuRateLimitInet
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.10
wwpLeosFlowCpuRateLimitLacp
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.11
wwpLeosFlowCpuRateLimitLldp
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.12
wwpLeosFlowCpuRateLimitMpls
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.13
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-33
wwpLeosFlowCpuRateLimitMstp
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.14
wwpLeosFlowCpuRateLimitPeArp
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.15
wwpLeosFlowCpuRateLimitPvst
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.16
wwpLeosFlowCpuRateLimitRstp
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.17
wwpLeosFlowCpuRateLimitLpbk
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.18
wwpLeosFlowCpuRateLimitRmtLpbk
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.19
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-34 WWP-LEOS-FLOW-MIB
wwpLeosFlowCpuRateLimitCxeRx
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.20
wwpLeosFlowCpuRateLimitCxeTx
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.21
wwpLeosFlowCpuRateLimitTwamp
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.22
wwpLeosFlowCpuRateLimitDflt
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.23
wwpLeosFlowCpuRateLimitTwampRsp
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.24
wwpLeosFlowCpuRateLimitMultiCast
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.25
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-35
wwpLeosFlowCpuRateLimitBroadCast
Description and OID
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.26
wwpLeosFlowCpuRateLimitArp
Description and OID
Port packet-per-second rate limit for packet type. Max supported rate on 4.x is current
1000.
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.27
wwpLeosFlowCpuRateLimitIcmp
Description and OID
Status
Port packet-per-second rate limit for packet type. Max supported rate on 4.x is current
1000.
Access
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.28
wwpLeosFlowCpuRateLimitTcpSyn
Description and OID
Status
Access
current
read-write
Status
Access
Port packet-per-second rate limit for packet type. Not supported on 4.x
current
read-write
Status
Access
Port packet-per-second rate limit for packet type. Not supported on 4.x
current
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.29
wwpLeosFlowCpuRateLimitRaps
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.30
wwpLeosFlowCpuRateLimitIpMgmt
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.31
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-36 WWP-LEOS-FLOW-MIB
wwpLeosFlowCpuRateLimitIpControl
Description and OID
Status
Access
Port packet-per-second rate limit for packet type. Not supported on 4.x
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.32
wwpLeosFlowCpuRateLimitIpV6Mgmt
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.33
wwpLeosFlowCpuRateLimitInet6
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.34
wwpLeosFlowCpuRateLimitEsmc
Description and OID
Port packet-per-second rate limit for ESMC packet type. Not supported on 4.x current
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.31.1.35
wwpLeosFlowCpuRateLimitStatsTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.6.1.1.32
wwpLeosFlowCpuRateLimitStatsEntry
1.3.6.1.4.1.6141.2.60.6.1.1.32.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-37
wwpLeosFlowCpuRateLimitStatsPort
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.1
wwpLeosFlowCpuRateLimitStatsBootpPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.2
wwpLeosFlowCpuRateLimitStatsCfmPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.3
wwpLeosFlowCpuRateLimitStatsCftPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.4
wwpLeosFlowCpuRateLimitStatsDot1xPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.5
wwpLeosFlowCpuRateLimitStatsOamPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-38 WWP-LEOS-FLOW-MIB
wwpLeosFlowCpuRateLimitStatsEprArpPassed
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.7
wwpLeosFlowCpuRateLimitStatsIgmpPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.8
wwpLeosFlowCpuRateLimitStatsInetPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.9
wwpLeosFlowCpuRateLimitStatsLacpPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.10
wwpLeosFlowCpuRateLimitStatsLldpPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.11
wwpLeosFlowCpuRateLimitStatsMplsPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-39
wwpLeosFlowCpuRateLimitStatsMstpPassed
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.13
wwpLeosFlowCpuRateLimitStatsPeArpPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.14
wwpLeosFlowCpuRateLimitStatsPvstPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.15
wwpLeosFlowCpuRateLimitStatsRstpPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.16
wwpLeosFlowCpuRateLimitStatsLpbkPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.17
wwpLeosFlowCpuRateLimitStatsRmtLpbkPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.18
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-40 WWP-LEOS-FLOW-MIB
wwpLeosFlowCpuRateLimitStatsCxeRxPassed
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.19
wwpLeosFlowCpuRateLimitStatsCxeTxPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.20
wwpLeosFlowCpuRateLimitStatsTwampPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.21
wwpLeosFlowCpuRateLimitStatsDfltPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.22
wwpLeosFlowCpuRateLimitStatsBootpDropped
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.23
wwpLeosFlowCpuRateLimitStatsCfmDropped
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.24
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-41
wwpLeosFlowCpuRateLimitStatsCftDropped
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.25
wwpLeosFlowCpuRateLimitStatsDot1xDropped
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.26
wwpLeosFlowCpuRateLimitStatsOamDropped
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.27
wwpLeosFlowCpuRateLimitStatsEprArpDropped
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.28
wwpLeosFlowCpuRateLimitStatsIgmpDropped
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.29
wwpLeosFlowCpuRateLimitStatsInetDropped
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.30
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-42 WWP-LEOS-FLOW-MIB
wwpLeosFlowCpuRateLimitStatsLacpDropped
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.31
wwpLeosFlowCpuRateLimitStatsLldpDropped
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.32
wwpLeosFlowCpuRateLimitStatsMplsDropped
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.33
wwpLeosFlowCpuRateLimitStatsMstpDropped
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.34
wwpLeosFlowCpuRateLimitStatsPeArpDropped
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.35
wwpLeosFlowCpuRateLimitStatsPvstDropped
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.36
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-43
wwpLeosFlowCpuRateLimitStatsRstpDropped
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.37
wwpLeosFlowCpuRateLimitStatsLpbkDropped
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.38
wwpLeosFlowCpuRateLimitStatsRmtLpbkDropped
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.39
wwpLeosFlowCpuRateLimitStatsCxeRxDropped
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.40
wwpLeosFlowCpuRateLimitStatsCxeTxDropped
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.41
wwpLeosFlowCpuRateLimitStatsTwampDropped
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.42
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-44 WWP-LEOS-FLOW-MIB
wwpLeosFlowCpuRateLimitStatsDfltDropped
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.43
wwpLeosFlowCpuRateLimitStatsTwampRspPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.44
wwpLeosFlowCpuRateLimitStatsTwampRspDropped
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.45
wwpLeosFlowCpuRateLimitStatsMultiCastPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.46
wwpLeosFlowCpuRateLimitStatsMultiCastDropped
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.47
wwpLeosFlowCpuRateLimitStatsBroadCastPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.48
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-45
wwpLeosFlowCpuRateLimitStatsBroadCastDropped
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.49
wwpLeosFlowCpuRateLimitStatsArpPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.50
wwpLeosFlowCpuRateLimitStatsArpDropped
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.51
wwpLeosFlowCpuRateLimitStatsIcmpPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.52
wwpLeosFlowCpuRateLimitStatsIcmpDropped
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.53
wwpLeosFlowCpuRateLimitStatsTcpSynPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.54
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-46 WWP-LEOS-FLOW-MIB
wwpLeosFlowCpuRateLimitStatsTcpSynDropped
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.55
wwpLeosFlowCpuRateLimitStatsRapsPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.56
wwpLeosFlowCpuRateLimitStatsRapsDropped
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.57
wwpLeosFlowCpuRateLimitStatsIpMgmtPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.58
wwpLeosFlowCpuRateLimitStatsIpMgmtDropped
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.59
wwpLeosFlowCpuRateLimitStatsIpControlPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.60
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-47
wwpLeosFlowCpuRateLimitStatsIpControlDropped
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.61
wwpLeosFlowCpuRateLimitStatsIpV6MgmtPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.62
wwpLeosFlowCpuRateLimitStatsIpV6MgmtDropped
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.63
wwpLeosFlowCpuRateLimitStatsInet6Passed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.64
wwpLeosFlowCpuRateLimitStatsInet6Dropped
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.65
wwpLeosFlowCpuRateLimitStatsEsmcPassed
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.66
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-48 WWP-LEOS-FLOW-MIB
wwpLeosFlowCpuRateLimitStatsEsmcDropped
Description and OID
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-write
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.6.1.1.32.1.67
wwpLeosFlowCpuRateLimitStatsClearTable
1.3.6.1.4.1.6141.2.60.6.1.1.33
wwpLeosFlowCpuRateLimitStatsClearEntry
1.3.6.1.4.1.6141.2.60.6.1.1.33.1
wwpLeosFlowCpuRateLimitStatsClearPort
1.3.6.1.4.1.6141.2.60.6.1.1.33.1.1
wwpLeosFlowCpuRateLimitStatsClear
1.3.6.1.4.1.6141.2.60.6.1.1.33.1.2
wwpLeosFlowServiceTotalStatsTable
1.3.6.1.4.1.6141.2.60.6.1.1.34
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-49
wwpLeosFlowServiceTotalStatsEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
The number of bytes received for this flow service entry. This counter
represents the upper 32 bits of the counter value.
current
read-only
Status
Access
The number of bytes received for this flow service entry. This counter
represents the upper 32 bits of the counter value.
current
read-only
Status
Access
The number of bytes received for this flow service entry. This counter
represents the upper 32 bits of the counter value.
current
read-only
Status
Access
The number of bytes received for this flow service entry. This counter
represents the upper 32 bits of the counter value.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.6.1.1.34.1
wwpLeosFlowServiceTotalStatsRxHi
1.3.6.1.4.1.6141.2.60.6.1.1.34.1.1
wwpLeosFlowServiceTotalStatsRxLo
1.3.6.1.4.1.6141.2.60.6.1.1.34.1.2
wwpLeosFlowServiceTotalStatsTxHi
1.3.6.1.4.1.6141.2.60.6.1.1.34.1.3
wwpLeosFlowServiceTotalStatsTxLo
1.3.6.1.4.1.6141.2.60.6.1.1.34.1.4
wwpLeosFlowServiceTotalStatsType
1.3.6.1.4.1.6141.2.60.6.1.1.34.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-50 WWP-LEOS-FLOW-MIB
wwpLeosFlowPortServiceLevelTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.6.1.1.40
wwpLeosFlowPortServiceLevelEntry
1.3.6.1.4.1.6141.2.60.6.1.1.40.1
wwpLeosFlowPortServiceLevelPort
1.3.6.1.4.1.6141.2.60.6.1.1.40.1.1
wwpLeosFlowPortServiceLevelMaxBandwidth
1.3.6.1.4.1.6141.2.60.6.1.1.40.1.2
wwpLeosFlowPortServiceLevelQueueSize
Description and OID
The size of the traffic queue provisioned for this port service level entry. This current
may also be referred to as Latency Tolerance.
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.40.1.3
wwpLeosFlowPortServiceLevelQueueSizeYellow
Description and OID
Status
The size of the yellow traffic queue provisioned for this service level entry. Also current
known as the discard preferred queue size.
Access
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.40.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-51
wwpLeosFlowPortServiceLevelQueueSizeRed
Description and OID
Status
The size of the RED traffic queue provisioned for this service level entry. Also current
known as the discard wanted queue size.
Access
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.40.1.5
wwpLeosFlowPortServiceLevelFlowGroup
Description and OID
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.6.1.1.40.1.6
wwpLeosFlowPortServiceLevelRedCurve
Description and OID
This object is used to specify the RED curve index to be used for the given port current
service level. If this OID is not specified, the system uses the default value of
this object which is the default port RED curve (zero). Valid values for this OID
are 0, 5-64
read-create
1.3.6.1.4.1.6141.2.60.6.1.1.40.1.7
wwpLeosFlowBurstConfigBacklogLimit
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.6.1.1.41
wwpLeosFlowBurstConfigMulticastLimit
1.3.6.1.4.1.6141.2.60.6.1.1.42
wwpLeosFlowBurstConfigVlanPriFltrOnThld
1.3.6.1.4.1.6141.2.60.6.1.1.43
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-52 WWP-LEOS-FLOW-MIB
wwpLeosFlowBurstConfigVlanPriFltrOffThld
Description and OID
Status
Access
current
read-write
Status
Access
When the VLAN priority filter is exceeded all priorities less than this are
dropped.
current
read-write
Status
Access
current
read-write
Status
Access
current
accessible-fornotify
Status
Access
current
accessible-fornotify
Status
Access
current
accessible-fornotify
1.3.6.1.4.1.6141.2.60.6.1.1.44
wwpLeosFlowBurstConfigVlanPriFltrPriMatch
1.3.6.1.4.1.6141.2.60.6.1.1.45
wwpLeosFlowBurstConfigVlanPriFltrState
1.3.6.1.4.1.6141.2.60.6.1.1.46
wwpLeosFlowMacMotionAttrOldPort
1.3.6.1.4.1.6141.2.60.6.1.2.1
wwpLeosFlowMacMotionAttrOldVlan
1.3.6.1.4.1.6141.2.60.6.1.2.2
wwpLeosFlowMacMotionAttrNewPort
1.3.6.1.4.1.6141.2.60.6.1.2.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-FLOW-MIB 36-53
wwpLeosFlowMacMotionAttrNewVlan
Description and OID
Status
Access
current
accessible-fornotify
Status
Access
current
accessible-fornotify
1.3.6.1.4.1.6141.2.60.6.1.2.4
wwpLeosFlowMacMotionAttrMacAddr
1.3.6.1.4.1.6141.2.60.6.1.2.5
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
wwpLeosFlowServiceLevelPortOverProvisionedTrap
A wwpLeosFlowServiceLevelPortOverProvisionedTrap notification is sent
when the provisioned bandwidth exceeds the total bandwidth available for a
port. This situation may also occur when changes in a link aggregation group
(such as deleting a port from the group) decrease the total bandwidth or at the
bootTime when the link aggregation groups are formed. Variable bindings
include: wwpLeosFlowServiceLevelPort.
Object Identifier: 1.3.6.1.4.1.6141.2.60.6.2.0.1
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosFlowServiceLevelPortUnderProvisionedTrap
A wwpLeosFlowServiceLevelPortUnderProvisionedTrap notification is sent
when the previously over-provisioned situation is resolved for a port. Variable
bindings include: wwpLeosFlowServiceLevelPort.
Object Identifier: 1.3.6.1.4.1.6141.2.60.6.2.0.2
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
MIB Reference
009-3220-011 Standard Revision A
August 2013
36-54 WWP-LEOS-FLOW-MIB
wwpLeosFlowL2SacHighThreshold
A wwpLeosFlowL2SacHighThreshold notification is sent whenever the
number of MACs learned exceeds SAC threshold limit. Variable bindings
include: wwpLeosFlowL2SacPortId, wwpLeosFlowL2SacNetType, and
wwpLeosFlowSacNetValue.
Object Identifier: 1.3.6.1.4.1.6141.2.60.6.2.0.3
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosFlowL2SacNormalThreshold
A wwpLeosFlowL2SacNormalThreshold notification is sent whenever the
number of MACs learned gets back to normal after exceeding the SAC
threshold limit. Variable bindings include: wwpLeosFlowL2SacPortId,
wwpLeosFlowL2SacNetType, and wwpLeosFlowSacNetValue.
Object Identifier: 1.3.6.1.4.1.6141.2.60.6.2.0.4
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosFlowMacMotionNotification
A wwpLeosFlowMacMotionNotification is sent whenever a learned MAC
moves from one port/vlan to a new port/vlan, at a rate defined by
wwpLeosFlowMacMotionEventsInterval. The five objects returned by this
trap are the MAC address that moved, the original port/vlan the MAC was
learned on, and the new port/vlan the MAC has moved to. Variable bindings
include: wwpLeosFlowMacMotionAttrOldPort,
wwpLeosFlowMacMotionAttrOldVlan, wwpLeosFlowMacMotionAttrNewPort,
wwpLeosFlowMacMotionAttrNewVlan, and
wwpLeosFlowMacMotionAttrMacAddr.
Object Identifier: 1.3.6.1.4.1.6141.2.60.6.2.0.5
Status: current
Supported Platforms: none
MIB Reference
009-3220-011 Standard Revision A
August 2013
37-1
WWP-LEOS-INFORM-STATUS-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-INFORM-STATUS-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosInformStatusReliableTrapState
Description and OID
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.42.1.1.1.1
wwpLeosInformStatusReliableTrapStatsClear
Description and OID
A get on this object always returns none. Setting this object to clear(1), clears current
the reliable trap statistics.
read-write
1.3.6.1.4.1.6141.2.60.42.1.1.1.2
wwpLeosInformStatusTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.42.1.1.2
wwpLeosInformStatusEntry
1.3.6.1.4.1.6141.2.60.42.1.1.2.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
37-2 WWP-LEOS-INFORM-STATUS-MIB
wwpLeosInformStatusTargetIp
Description and OID
Status
Access
Ip Address of Manager.
current
accessible-fornotify
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.42.1.1.2.1.1
wwpLeosInformStatusTargetPort
1.3.6.1.4.1.6141.2.60.42.1.1.2.1.2
wwpLeosInformStatusPendingInforms
1.3.6.1.4.1.6141.2.60.42.1.1.2.1.3
wwpLeosInformStatusLostInforms
1.3.6.1.4.1.6141.2.60.42.1.1.2.1.4
wwpLeosInformStatusDroppedInforms
1.3.6.1.4.1.6141.2.60.42.1.1.2.1.5
wwpLeosInformStatusTimeout
1.3.6.1.4.1.6141.2.60.42.1.1.2.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-INFORM-STATUS-MIB 37-3
wwpLeosInformStatusRetries
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.42.1.1.2.1.7
wwpLeosInformStatusCurrentTimeoutValue
1.3.6.1.4.1.6141.2.60.42.1.1.2.1.8
wwpLeosInformStatusCurrentRetries
1.3.6.1.4.1.6141.2.60.42.1.1.2.1.9
wwpLeosInformStatusTotalTimeouts
1.3.6.1.4.1.6141.2.60.42.1.1.2.1.10
wwpLeosInformStatusTotalAcknowledgedInforms
1.3.6.1.4.1.6141.2.60.42.1.1.2.1.11
wwpLeosInformStatusMaxTransmissions
1.3.6.1.4.1.6141.2.60.42.1.1.2.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
37-4 WWP-LEOS-INFORM-STATUS-MIB
wwpLeosInformStatusMaxDelayToAcknowledgeInform
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Setting this object to send(1) causes it to send any pending informs from the
manager's inform queue.
current
read-write
Status
Access
current
read-write
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.42.1.1.2.1.13
wwpLeosInformStatusLastDiscardedInformTimeStamp
1.3.6.1.4.1.6141.2.60.42.1.1.2.1.14
wwpLeosInformStatusResend
1.3.6.1.4.1.6141.2.60.42.1.1.2.1.15
wwpLeosInformStatusClearStats
1.3.6.1.4.1.6141.2.60.42.1.1.2.1.16
wwpLeosInetTargetInformStatusTable
1.3.6.1.4.1.6141.2.60.42.1.1.3
wwpLeosInetTargetInformStatusEntry
1.3.6.1.4.1.6141.2.60.42.1.1.3.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-INFORM-STATUS-MIB 37-5
wwpLeosInetTargetInformStatusInetAddrType
Description and OID
Status
Access
current
accessible-fornotify
Status
Access
current
accessible-fornotify
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.42.1.1.3.1.1
wwpLeosInetTargetInformStatusInetAddr
1.3.6.1.4.1.6141.2.60.42.1.1.3.1.2
wwpLeosInetTargetInformStatusTargetPort
1.3.6.1.4.1.6141.2.60.42.1.1.3.1.3
wwpLeosInetTargetInformStatusPendingInforms
1.3.6.1.4.1.6141.2.60.42.1.1.3.1.4
wwpLeosInetTargetInformStatusLostInforms
1.3.6.1.4.1.6141.2.60.42.1.1.3.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
37-6 WWP-LEOS-INFORM-STATUS-MIB
wwpLeosInetTargetInformStatusDroppedInforms
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.42.1.1.3.1.6
wwpLeosInetTargetInformStatusTimeout
1.3.6.1.4.1.6141.2.60.42.1.1.3.1.7
wwpLeosInetTargetInformStatusRetries
1.3.6.1.4.1.6141.2.60.42.1.1.3.1.8
wwpLeosInetTargetInformStatusCurrentTimeoutValue
1.3.6.1.4.1.6141.2.60.42.1.1.3.1.9
wwpLeosInetTargetInformStatusCurrentRetries
1.3.6.1.4.1.6141.2.60.42.1.1.3.1.10
wwpLeosInetTargetInformStatusTotalTimeouts
1.3.6.1.4.1.6141.2.60.42.1.1.3.1.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-INFORM-STATUS-MIB 37-7
wwpLeosInetTargetInformStatusTotalAcknowledgedInforms
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Setting this object to send(1) causes it to send any pending informs from the
manager's inform queue.
current
read-write
Status
Access
Setting this object to clear(1) clears reliable trap statistics for this manager.
current
read-write
1.3.6.1.4.1.6141.2.60.42.1.1.3.1.12
wwpLeosInetTargetInformStatusMaxTransmissions
1.3.6.1.4.1.6141.2.60.42.1.1.3.1.13
wwpLeosInetTargetInformStatusMaxDelayToAcknowledgeInform
1.3.6.1.4.1.6141.2.60.42.1.1.3.1.14
wwpLeosInetTargetInformStatusLastDiscardedInformTimeStamp
1.3.6.1.4.1.6141.2.60.42.1.1.3.1.15
wwpLeosInetTargetInformStatusResend
1.3.6.1.4.1.6141.2.60.42.1.1.3.1.16
wwpLeosInetTargetInformStatusClearStats
1.3.6.1.4.1.6141.2.60.42.1.1.3.1.17
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
37-8 WWP-LEOS-INFORM-STATUS-MIB
wwpLeosInformDiscardNotification
A wwpLeosInformDiscardNotification notification is sent whenever a
notification is overwritten in manager's inform queue and previously generated
inform request times out. Variable bindings include:
wwpLeosInformStatusTargetIp, wwpLeosInformStatusLostInforms, and
wwpLeosInformStatusLastDiscardedInformTimeStamp.
Object Identifier: 1.3.6.1.4.1.6141.2.60.42.2.0.1
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosInetTargetInformDiscardNotification
This notification is sent whenever a notification is overwritten in manager's
inform queue and previously generated inform request times out. This
notification supports inet addressing. Variable bindings include:
wwpLeosInetTargetInformStatusInetAddr,
wwpLeosInetTargetInformStatusInetAddrType,
wwpLeosInetTargetInformStatusLostInforms, and
wwpLeosInetTargetInformStatusLastDiscardedInformTimeStamp.
Object Identifier: 1.3.6.1.4.1.6141.2.60.42.2.0.2
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
MIB Reference
009-3220-011 Standard Revision A
August 2013
38-1
WWP-LEOS-IP-INTERFACE-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-IP-INTERFACE-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosIpInterfaceTable
Description and OID
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.24.1.1.1
wwpLeosIpInterfaceEntry
Description and OID
Interface IP and subnet mask entry. These interfaces are used to cause the current
switch CPU to become involved with the IP traffic. By default, a minimum of
two interfaces must always exist, one for the local management interface, one
for the remote management interface, and one or more for voice over IP.
not-accessible
1.3.6.1.4.1.6141.2.60.24.1.1.1.1
wwpLeosIpInterfaceIndex
Description and OID
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.24.1.1.1.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
38-2 WWP-LEOS-IP-INTERFACE-MIB
wwpLeosIpInterfaceName
Description and OID
Status
Access
current
read-only
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.24.1.1.1.1.2
wwpLeosIpInterfaceIpAddr
1.3.6.1.4.1.6141.2.60.24.1.1.1.1.3
wwpLeosIpInterfaceSubnet
1.3.6.1.4.1.6141.2.60.24.1.1.1.1.4
wwpLeosIpInterfaceIfIndexXref
1.3.6.1.4.1.6141.2.60.24.1.1.1.1.5
wwpLeosIpExtInterfaceTable
1.3.6.1.4.1.6141.2.60.24.1.1.2
wwpLeosIpExtInterfaceEntry
1.3.6.1.4.1.6141.2.60.24.1.1.2.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-IP-INTERFACE-MIB 38-3
wwpLeosIpInterfaceEnable
Description and OID
Status
The status of each interface. A value of true(1) indicates that this interface is current
enabled and a value of false(2) indicates that this interface is disabled. The
device should not allow the Management Station to disable all the interfaces
available on the box.
Access
read-write
1.3.6.1.4.1.6141.2.60.24.1.1.2.1.1
wwpLeosIpInterfaceVlanId
Description and OID
Status
Access
current
read-write
Status
Access
The 802.1p Priority value for the management traffic on this interface.
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.24.1.1.2.1.2
wwpLeosIpInterfaceMgmtPktPriority
1.3.6.1.4.1.6141.2.60.24.1.1.2.1.3
wwpLeosIpInterfaceAddrNotifEnabled
1.3.6.1.4.1.6141.2.60.24.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
38-4 WWP-LEOS-IP-INTERFACE-MIB
wwpLeosIpDataInterfaceTable
Description and OID
Status
Data Interface IP and subnet mask entry. To create a loopback interface in this current
table, the following attributes must be specified:
wwpLeosIpDataInterfaceIndex wwpLeosIpDataInterfaceName
wwpLeosIpDataInterfaceIpAddr wwpLeosIpDataInterfaceType must be set to
'loopback'. wwpLeosIpDataInterfaceVlanId defaults to 1 and cannot be set
or changed. No other MIB object should be set otherwise error is returned.
To create a regular data interface the following attributes must be specified:
wwpLeosIpDataInterfaceIndex wwpLeosIpDataInterfaceName
wwpLeosIpDataInterfaceIpAddr wwpLeosIpDataInterfaceMask
wwpLeosIpDataInterfaceVlanId must be specified when
the interface is
created. It cannot be changed after
creation. wwpLeosIpDataRowStatus
must be set to 'createAndGo'.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.24.1.1.4
wwpLeosIpDataInterfaceEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-create
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.24.1.1.4.1
wwpLeosIpDataInterfaceIndex
1.3.6.1.4.1.6141.2.60.24.1.1.4.1.1
wwpLeosIpDataInterfaceName
1.3.6.1.4.1.6141.2.60.24.1.1.4.1.2
wwpLeosIpDataInterfaceIpAddr
1.3.6.1.4.1.6141.2.60.24.1.1.4.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-IP-INTERFACE-MIB 38-5
wwpLeosIpDataInterfaceMask
Description and OID
Status
Access
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.24.1.1.4.1.4
wwpLeosIpDataInterfaceVlanId
Description and OID
The vlanId associated with this Data IP interface. This vlan must already exist current
on the device. The vlanId must be specified when the interface is created. It
cannot be set after creation. The vlanId cannot be specified and defaults to 1
for a loopback interface.
read-create
1.3.6.1.4.1.6141.2.60.24.1.1.4.1.5
wwpLeosIpDataInterfaceType
Description and OID
Status
Access
current
read-create
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.24.1.1.4.1.6
wwpLeosIpDataInterfaceIfIndex
1.3.6.1.4.1.6141.2.60.24.1.1.4.1.7
wwpLeosIpDataInterfaceMac
1.3.6.1.4.1.6141.2.60.24.1.1.4.1.8
wwpLeosIpDataInterfaceIfMtu
Description and OID
current
The size of the largest packet which can be sent/received on the interface,
specified in octets. For interfaces that are used for transmitting network
datagrams, this is the size of the largest network datagram that can be sent on
the interface.
read-create
1.3.6.1.4.1.6141.2.60.24.1.1.4.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
38-6 WWP-LEOS-IP-INTERFACE-MIB
wwpLeosIpDataInterfaceRowStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, set this object to 'destroy'. If the entry exists, it is displayed as
'active'.
Access
read-create
1.3.6.1.4.1.6141.2.60.24.1.1.4.1.10
wwpLeosIpDataInterfaceCvid
Description and OID
Status
Access
The customer VlanId associated with this Data IP interface. This is only
applicable to VS Member type IP Interfaces and defaults to 0 on all other IP
Interface types.
current
read-create
Status
Access
current
read-only
Status
Access
current
read-write
Status
Access
This object provides a count of the number of lookups satisfied by a cache hit. current
read-only
1.3.6.1.4.1.6141.2.60.24.1.1.4.1.11
wwpLeosIpInterfaceOperationalGateway
1.3.6.1.4.1.6141.2.60.24.1.1.5
wwpLeosIpAclState
1.3.6.1.4.1.6141.2.60.24.1.2.1
wwpLeosIpAclCacheHit
Description and OID
1.3.6.1.4.1.6141.2.60.24.1.2.2
wwpLeosIpAclNoHit
Description and OID
Status
Access
This object provides a count of the number of lookups that failed because the current
source IP address did not match a table entry.
read-only
1.3.6.1.4.1.6141.2.60.24.1.2.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-IP-INTERFACE-MIB 38-7
wwpLeosIpAclBadPort
Description and OID
Status
Access
This object provides a count of the number of lookups that failed because the current
ingress port was disallowed by a table entry.
read-only
1.3.6.1.4.1.6141.2.60.24.1.2.4
wwpLeosIpAclClearStats
Description and OID
Status
Set this object to 'destroy' to clear the global and table entry statistics counters. deprecated
Access
read-write
1.3.6.1.4.1.6141.2.60.24.1.2.5
wwpLeosIpAclBadDscp
Description and OID
Status
Access
Count of the number of lookups that failed because the ingress DSCP value
was disallowed by a table entry.
current
read-only
Status
Access
current
read-only
Status
Access
This object provides a count of the number of IP ACL rules that are currently
configured.
current
read-only
Status
Access
This object provides a count of the max number of IP ACL rules that can be
configured.
current
read-only
1.3.6.1.4.1.6141.2.60.24.1.2.6
wwpLeosIpAclOperState
1.3.6.1.4.1.6141.2.60.24.1.2.7
wwpLeosIpAclInUseEntries
1.3.6.1.4.1.6141.2.60.24.1.2.8
wwpLeosIpAclMaxEntries
1.3.6.1.4.1.6141.2.60.24.1.2.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
38-8 WWP-LEOS-IP-INTERFACE-MIB
wwpLeosIpAclStatsClear
Description and OID
Status
Set this object to true(1) to clear the global and table entry statistics counters. current
Access
read-write
1.3.6.1.4.1.6141.2.60.24.1.2.10
wwpLeosIpAclTable
Description and OID
Status
Access
The (conceptual) table listing the display parameters for the IP ACL table.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
This object is used to specify the physical ports which frames are allowed to
ingress from. The mask is big endian and each bit,
numbered from 0 to
27, represents a physical port numbered from
1 to 28. A value of
0xFFFFFFFF may be used to specify all ports.
deprecated
read-create
1.3.6.1.4.1.6141.2.60.24.1.3.1
wwpLeosIpAclEntry
1.3.6.1.4.1.6141.2.60.24.1.3.1.1
wwpLeosIpAclEntryIpAddr
1.3.6.1.4.1.6141.2.60.24.1.3.1.1.1
wwpLeosIpAclEntryIpMask
1.3.6.1.4.1.6141.2.60.24.1.3.1.1.2
wwpLeosIpAclEntryPortMask
1.3.6.1.4.1.6141.2.60.24.1.3.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-IP-INTERFACE-MIB 38-9
wwpLeosIpAclEntryHits
Description and OID
Status
Access
current
read-only
Status
Access
Count of the number of lookups that failed because the ingress port was
disallowed by the table entry.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.24.1.3.1.1.4
wwpLeosIpAclEntryBadPort
1.3.6.1.4.1.6141.2.60.24.1.3.1.1.5
wwpLeosIpAclEntryStatus
Description and OID
Set this object to 'CreateAndGo' to create a new table entry. Set it to 'destroy' current
to remove an existing entry.
read-create
1.3.6.1.4.1.6141.2.60.24.1.3.1.1.6
wwpLeosIpAclEntryDscpMask
Description and OID
Status
current
This object is used to specify the DSCP values for which IP packets are
allowed to ingress. The mask is big endian and each bit, numbered from 0 to
63, represents a DSCP value numbered from 0 to 63. A value of
0xFFFFFFFFFFFFFFFF may be used to specify all.
Access
read-create
1.3.6.1.4.1.6141.2.60.24.1.3.1.1.7
wwpLeosIpAclEntryBadDscp
Description and OID
Status
Access
Count of the number of lookups that failed because the ingress DSCP value
was disallowed by the table entry.
current
read-only
1.3.6.1.4.1.6141.2.60.24.1.3.1.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
38-10 WWP-LEOS-IP-INTERFACE-MIB
wwpLeosIpAclEntryPortBitMask
Description and OID
Status
Access
This object is used to specify the physical ports that frames are allowed to
ingress from. The mask is big endian and each bit, numbered from 0 to 63,
represents a physical port numbered from 1 to 64. A value of
0xFFFFFFFFFFFFFFFF may be used to specify all ports.
current
read-create
1.3.6.1.4.1.6141.2.60.24.1.3.1.1.9
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
wwpLeosIpInterfaceAddrChgNotification
A wwpLeosIpInterfaceAddrChgNotification is sent whenever the IP address of
an interface changes. Variable bindings include: wwpLeosIpInterfaceName,
wwpLeosIpInterfaceIpAddr, and wwpLeosIpInterfaceSubnet.
Object Identifier: 1.3.6.1.4.1.6141.2.60.24.2.0.1
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosIpInterfaceOperationalGatewayChgNotification
A wwpLeosIpOperationalGatewayChgNotification notification is sent out
whenever the operational gateway is changed. Variable bindings include:
wwpLeosIpInterfaceOperationalGateway.
Object Identifier: 1.3.6.1.4.1.6141.2.60.24.2.0.2
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
MIB Reference
009-3220-011 Standard Revision A
August 2013
39-1
WWP-LEOS-LDP-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-LDP-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosLdpAdminStatus
Description and OID
Status
Access
current
read-write
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.32.1.1.1
wwpLeosLdpOperStatus
1.3.6.1.4.1.6141.2.60.32.1.1.2
wwpLeosLdpHelloHoldTime
Description and OID
The 16-bit integer value that represents the proposed global hello hold timer current
(in seconds) for LDP. An LSR maintains a record of Hellos received from
potential peers. This object represents the Hold Time in the Common Hello
Parameters TLV of the Hello Message. A value of 65535 means infinite (i.e.,
wait forever). All other values represent the amount of time in seconds to wait
for a Hello Message. Setting the hold time to a value smaller than 15 is not
recommended, although not forbidden according to RFC3036.
read-write
1.3.6.1.4.1.6141.2.60.32.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
39-2 WWP-LEOS-LDP-MIB
wwpLeosLdpKeepAliveHoldTime
Description and OID
Status
Access
The 16-bit integer value that represents the proposed global keep alive hold
timer for LDP.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.32.1.1.4
wwpLeosLdpSessionTable
Description and OID
A table of Sessions between the LDP Entities and LDP Peers. Each row in this current
table represents a single session.
not-accessible
1.3.6.1.4.1.6141.2.60.32.1.2.1
wwpLeosLdpSessionEntry
Description and OID
Status
Access
not-accessible
1.3.6.1.4.1.6141.2.60.32.1.2.1.1
wwpLeosLdpEntityLdpId
Description and OID
Status
The LDP identifier. The first four octets encode an IP address assigned to the current
LSR, and the last two octets identify a specific label space within the LSR.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.32.1.2.1.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-LDP-MIB 39-3
wwpLeosLdpEntityIndex
Description and OID
Status
This index is used as a secondary index to uniquely identify this row. Before current
creating a row in this table, the 'mplsLdpEntityIndexNext' object should be
retrieved. That value should be used for the value of this index when creating
a row in this table. NOTE: if a value of zero (0) is retrieved, that indicates that
no rows can be created in this table at this time. A secondary index (this object)
is meaningful to some but not all, LDP implementations. For example, an LDP
implementation that uses PPP uses this index to differentiate PPP sub-links.
Another way to use this index is to give it the value of ifIndex. However, this is
dependant on the implementation. This field is deprecated in the following
tables provided by DC-CR-LDP Session Controller. - mplsLdpEntityTable. mplsLdpPeerTable. In these tables the value of the Entity Index is always 1.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.32.1.2.1.1.2
wwpLeosLdpPeerLdpId
Description and OID
Status
Access
current
not-accessible
Status
Access
The locally configured keepalive hold time for this session, in seconds. Note current
that the value of this field reflects configuration at the time of session
initialization; this may differ from the configuration that would apply to a new
session, if configuration has changed since this session was initialized.
read-only
1.3.6.1.4.1.6141.2.60.32.1.2.1.1.3
wwpLeosLdpSessionConfiguredHoldTime
Description and OID
1.3.6.1.4.1.6141.2.60.32.1.2.1.1.4
wwpLeosLdpSessionPeerHoldTime
Description and OID
Status
Access
The peer's advertised keepalive hold time for this session in seconds. Note current
that the value of this field reflects the peer's configuration at the time of session
initialization; this may differ from the configuration that would apply to a new
session, if the peer's configuration has changed since this session was
initialized.
read-only
1.3.6.1.4.1.6141.2.60.32.1.2.1.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
39-4 WWP-LEOS-LDP-MIB
wwpLeosLdpSessionHoldTimeInUse
Description and OID
Status
Access
The keepalive hold time that is currently in use for this session, in seconds.
current
read-only
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.32.1.2.1.1.6
wwpLeosLdpHelloAdjacencyTable
1.3.6.1.4.1.6141.2.60.32.1.2.2
wwpLeosLdpHelloAdjacencyEntry
Description and OID
Each row represents a single LDP Hello Adjacency. An LDP Session can have current
one or more Hello Adjacencies.
not-accessible
1.3.6.1.4.1.6141.2.60.32.1.2.2.1
wwpLeosLdpHelloAdjacencyIndex
Description and OID
Status
Access
current
not-accessible
Status
Access
The locally configured hello hold time for this adjacency, in seconds.
current
read-only
Status
Access
The peer's advertised hello hold time for this adjacency, in seconds.
current
read-only
1.3.6.1.4.1.6141.2.60.32.1.2.2.1.1
wwpLeosLdpHelloAdjacencyConfiguredHoldTime
1.3.6.1.4.1.6141.2.60.32.1.2.2.1.2
wwpLeosLdpHelloAdjacencyPeerHoldTime
1.3.6.1.4.1.6141.2.60.32.1.2.2.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-LDP-MIB 39-5
wwpLeosLdpIfTable
Description and OID
Status
Access
current
not-accessible
Status
Access
WWP Descr.
current
not-accessible
Status
Access
Interface Name
current
read-only
Status
Access
Interface Index
current
not-accessible
Status
Access
Interface IP Address
current
read-only
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.32.1.2.3
wwpLeosLdpIfEntry
1.3.6.1.4.1.6141.2.60.32.1.2.3.1
wwpLeosLdpIfName
1.3.6.1.4.1.6141.2.60.32.1.2.3.1.1
wwpLeosLdpIfIndex
1.3.6.1.4.1.6141.2.60.32.1.2.3.1.2
wwpLeosLdpIfIpAddr
1.3.6.1.4.1.6141.2.60.32.1.2.3.1.3
wwpLeosLdpIfAdminStatus
1.3.6.1.4.1.6141.2.60.32.1.2.3.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
39-6 WWP-LEOS-LDP-MIB
wwpLeosLdpIfOperStatus
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.32.1.2.3.1.5
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
40-1
WWP-LEOS-MPLS-OAM-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-MPLS-OAM-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosMPLSOAMLspPingMax
Description and OID
Status
Access
The maximum number of Lsp Ping that are allowed at any given time.
current
read-only
Status
Access
The maximum number of Lsp Trace Routes that are allowed at any given time. current
read-only
1.3.6.1.4.1.6141.2.60.36.1.1
wwpLeosMPLSOAMLspTraceRtMax
Description and OID
1.3.6.1.4.1.6141.2.60.36.1.2
wwpLeosMPLSOamLspPingCtlTable
Description and OID
Status
current
Defines the wwpLeosMPLSOamLspPing Control Table for providing, via
SNMP, the capability of performing wwpLeosMPLSOamLspPing operations at
a remote host. The results of these operations are stored in the
wwpLeosMPLSOamLspPingResultsTable. When creating any entry in the
table wwpLeosMPLSOamLspPingCtlLspName must be operationally enabled
else an error is returned.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.36.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
40-2 WWP-LEOS-MPLS-OAM-MIB
wwpLeosMPLSOamLspPingCtlEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.36.1.3.1
wwpLeosMPLSOamLspPingCtlIndex
1.3.6.1.4.1.6141.2.60.36.1.3.1.1
wwpLeosMPLSOamLspPingCtlLspType
1.3.6.1.4.1.6141.2.60.36.1.3.1.3
wwpLeosMPLSOamLspPingCtlLspName
1.3.6.1.4.1.6141.2.60.36.1.3.1.4
wwpLeosMPLSOamLspPingCtlPktSize
1.3.6.1.4.1.6141.2.60.36.1.3.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-MPLS-OAM-MIB 40-3
wwpLeosMPLSOamLspPingCtlTimeOut
Description and OID
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-write
Status
Access
This object specifies the TTL to be used in the MPLS label header.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.36.1.3.1.6
wwpLeosMPLSOamLspPingCtlCount
1.3.6.1.4.1.6141.2.60.36.1.3.1.7
wwpLeosMPLSOamLspPingCtlAdminState
1.3.6.1.4.1.6141.2.60.36.1.3.1.8
wwpLeosMPLSOamLspPingCtlTtl
1.3.6.1.4.1.6141.2.60.36.1.3.1.9
wwpLeosMPLSOamLspPingCtlRowStatus
Description and OID
current
This object allows entries to be created and deleted in the
wwpLeosMPLSOamLspPingCtlTable. Deletion of an entry in this table results
in all corresponding (same wwpLeosMPLSOamLspPingCtlIndex index values)
wwpLeosMPLSOamLspPingResultsTable.
read-create
1.3.6.1.4.1.6141.2.60.36.1.3.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
40-4 WWP-LEOS-MPLS-OAM-MIB
wwpLeosMPLSOamLspPingResultsTable
Description and OID
Status
Defines the LspPing Results Table for providing the capability of performing current
wwpLeosMPLSOamLspPing operations at a remote host. The results of these
operations are stored in the wwpLeosMPLSOamLspPingResultsTable and the
wwpLeosMPLSOamLspPingPastProbeTable. An entry is added to the
wwpLeosMPLSOamLspPingResultsTable when an
wwpLeosMPLSOamLspPingCtlEntry is started by successful transition of its
wwpLeosMPLSOamLspPingCtlAdminStatus object to enabled(1). An entry is
removed from the wwpLeosMPLSOamLspPingResultsTable when its
corresponding wwpLeosMPLSOamLspPingCtlEntry is deleted.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.36.1.4
wwpLeosMPLSOamLspPingResultsEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.36.1.4.1
wwpLeosMPLSOamLspPingResultsOperStatus
1.3.6.1.4.1.6141.2.60.36.1.4.1.1
wwpLeosMPLSOamLspPingResultsStatus
1.3.6.1.4.1.6141.2.60.36.1.4.1.2
wwpLeosMPLSOamLspPingResultsLspType
1.3.6.1.4.1.6141.2.60.36.1.4.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-MPLS-OAM-MIB 40-5
wwpLeosMPLSOamLspPingResultsLspName
Description and OID
Status
Access
current
read-only
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.36.1.4.1.4
wwpLeosMPLSOamLspPingResultsMinRtt
Description and OID
1.3.6.1.4.1.6141.2.60.36.1.4.1.5
wwpLeosMPLSOamLspPingResultsMaxRtt
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.36.1.4.1.6
wwpLeosMPLSOamLspPingResultsAverageRtt
Description and OID
Status
Access
current
read-only
Status
Access
The value of this object reflects the number of probes sent for the
corresponding wwpLeosMPLSOamLspPingCtlEntry and
wwpLeosMPLSOamLspPingResultsEntry. The value of this object MUST be
reported as 0 when no probes have been sent.
current
read-only
1.3.6.1.4.1.6141.2.60.36.1.4.1.7
wwpLeosMPLSOamLspPingResultsProbesSent
1.3.6.1.4.1.6141.2.60.36.1.4.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
40-6 WWP-LEOS-MPLS-OAM-MIB
wwpLeosMPLSOamLspPingResultsProbeResponses
Description and OID
Status
Access
current
Number of responses received for the corresponding
wwpLeosMPLSOamLspPingCtlEntry and
wwpLeosMPLSOamLspPingResultsEntry. The value of this object MUST be
reported as 0 when no probe responses have been received.
read-only
1.3.6.1.4.1.6141.2.60.36.1.4.1.9
wwpLeosMPLSOamLspTraceRouteCtlTable
Description and OID
Status
current
Defines the Remote Operations Traceroute Control Table for providing the
capability of invoking traceroute from a remote host. The results of traceroute
operations can be stored in the
wwpLeosMPLSOamLspTraceRouteResultsTable,
wwpLeosMPLSOamLspTraceRouteHopsTable.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.36.1.5
wwpLeosMPLSOamLspTraceRouteCtlEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.36.1.5.1
wwpLeosMPLSOamLspTraceRouteCtlIndex
1.3.6.1.4.1.6141.2.60.36.1.5.1.1
wwpLeosMPLSOamLspTraceRouteCtlLspType
1.3.6.1.4.1.6141.2.60.36.1.5.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-MPLS-OAM-MIB 40-7
wwpLeosMPLSOamLspTraceRouteCtlLspName
Description and OID
Status
current
Specifies the LSP Name. A value for this object MUST be set prior to
transitioning its corresponding wwpLeosMPLSOamLspTraceRouteCtlEntry to
active(1) via wwpLeosMPLSOamLspTraceRouteCtlRowStatus.
Access
read-create
1.3.6.1.4.1.6141.2.60.36.1.5.1.3
wwpLeosMPLSOamLspTraceRouteCtlTimeOut
Description and OID
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.36.1.5.1.4
wwpLeosMPLSOamLspTraceRouteCtlMaxTtl
1.3.6.1.4.1.6141.2.60.36.1.5.1.5
wwpLeosMPLSOamLspTraceRouteCtlAdminStatus
Description and OID
read-create
1.3.6.1.4.1.6141.2.60.36.1.5.1.6
wwpLeosMPLSOamLspTraceRouteCtlRowStatus
Description and OID
Status
current
This object allows entries to be created and deleted in the
wwpLeosMPLSOamLspTraceRouteCtlTable. Deletion of an entry in this table
results in all corresponding wwpLeosMPLSOamLspTraceRouteResultsTable
and wwpLeosMPLSOamLspTraceRouteHopsTable entries being deleted.
Access
read-create
1.3.6.1.4.1.6141.2.60.36.1.5.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
40-8 WWP-LEOS-MPLS-OAM-MIB
wwpLeosMPLSOamLspTraceRouteResultsTable
Description and OID
Status
Defines the Remote Operations Traceroute Results Table for keeping track of current
the status of a wwpLeosMPLSOamLspTraceRouteCtlEntry. An entry is added
to the wwpLeosMPLSOamLspTraceRouteResultsTable when an
wwpLeosMPLSOamLspTraceRouteCtlEntry is started by successful transition
of its wwpLeosMPLSOamLspTraceRouteCtlAdminStatus object to
enabled(1). An entry is removed from the
wwpLeosMPLSOamLspTraceRouteResultsTable when its corresponding
wwpLeosMPLSOamLspTraceRouteCtlEntry is deleted.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.36.1.6
wwpLeosMPLSOamLspTraceRouteResultsEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Reflects the current TTL value (range from 1 to 255) for a remote traceroute
operation. Maximum TTL value is determined by
wwpLeosMPLSOamLspTraceRouteCtlMaxTtl.
current
read-only
1.3.6.1.4.1.6141.2.60.36.1.6.1
wwpLeosMPLSOamLspTraceRouteResultsOperStatus
1.3.6.1.4.1.6141.2.60.36.1.6.1.1
wwpLeosMPLSOamLspTraceRouteResultsStatus
1.3.6.1.4.1.6141.2.60.36.1.6.1.2
wwpLeosMPLSOamLspTraceRouteResultsCurHopCount
1.3.6.1.4.1.6141.2.60.36.1.6.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-MPLS-OAM-MIB 40-9
wwpLeosMPLSOamLspTraceRouteHopTable
Description and OID
Status
current
Defines the Remote Operations Traceroute Results Table for storing the
results of a traceroute operation. An implementation of this MIB removes the
oldest entry in the wwpLeosMPLSOamTraceRouteProbeHistoryTable to allow
the addition of an new entry once the number of rows in the
wwpLeosMPLSOamTraceRouteProbeHistoryTable reaches the value
specified by wwpLeosMPLSOamTraceRouteCtlMaxRows.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.36.1.7
wwpLeosMPLSOamLspTraceRouteHopEntry
Description and OID
Status
Defines a table for storing the results of a traceroute operation. Entries in this current
table are limited by the value of the corresponding
wwpLeosMPLSOamLspTraceRouteCtlMaxRows object. The first two index
elements identify the wwpLeosMPLSOamLspTraceRouteCtlEntry that a
wwpLeosMPLSOamLspTraceRouteProbeHistoryEntry belongs to. The third
index element selects a single traceroute operation result. The fourth and fifth
indexes select the hop and the probe for a particular traceroute operation.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.36.1.7.1
wwpLeosMPLSOamLspTraceRouteHopIndex
Description and OID
Status
Access
Reflects the current TTL value (range from 1 to 255) for a remote traceroute
operation. Maximum TTL value is determined by
wwpLeosMPLSOamLspTraceRouteCtlMaxTtl.
current
read-only
Status
Access
Reflects the current TTL value (range from 1 to 255) for a remote traceroute
operation. Maximum TTL value is determined by
wwpLeosMPLSOamLspTraceRouteCtlMaxTtl.
current
read-only
1.3.6.1.4.1.6141.2.60.36.1.7.1.1
wwpLeosMPLSOamLspTraceRouteHopIp
1.3.6.1.4.1.6141.2.60.36.1.7.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
40-10 WWP-LEOS-MPLS-OAM-MIB
wwpLeosMPLSOamLspTraceRouteHopLabel
Description and OID
Status
Access
Reflects the current TTL value (range from 1 to 255) for a remote traceroute
operation. Maximum TTL value is determined by
wwpLeosMPLSOamLspTraceRouteCtlMaxTtl.
current
read-only
1.3.6.1.4.1.6141.2.60.36.1.7.1.3
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
41-1
WWP-LEOS-MSTP-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-MSTP-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosMstpBridgeEnable
Description and OID
Status
Access
When this object is set to true the MSTP operation for the bridge is enabled.
Setting this object to false disables bridge MSTP operations.
current
read-write
Status
Access
This object contains the value of the ForceVersion MSTP State Machine
Performance Parameter.
current
read-only
Status
Access
This object represents the value of the FwdDelay MSTP State Machine
Performance Parameter.
current
read-write
1.3.6.1.4.1.6141.2.60.37.1.1.1
wwpLeosMstpForceVersion
1.3.6.1.4.1.6141.2.60.37.1.1.2
wwpLeosMstpForwardDelay
1.3.6.1.4.1.6141.2.60.37.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
41-2 WWP-LEOS-MSTP-MIB
wwpLeosMstpTxHoldCount
Description and OID
Status
Access
This object represents the value of the TxHoldCount MSTP State Machine
Performance Parameter.
current
read-write
Status
Access
This object represents the value of the HelloTime MSTP State Machine
Performance Parameter.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.37.1.1.4
wwpLeosMstpHelloTime
1.3.6.1.4.1.6141.2.60.37.1.1.5
wwpLeosMstpMaxAge
Description and OID
This object represents the value of the Max Age used by the multiple spanning current
tree protocol.
read-write
1.3.6.1.4.1.6141.2.60.37.1.1.6
wwpLeosMstpMaxHops
Description and OID
Status
Access
This object represents the value of the MaxHops MSTP State Machine
Performance Parameter.
current
read-write
Status
Access
This object specifies whether the loopback port blocking feature is enabled/
disabled for the multiple spanning tree protocol. Values of 'true' or 'false'
enable or disable this feature, respectively.
current
read-write
1.3.6.1.4.1.6141.2.60.37.1.1.7
wwpLeosMstpLoopbackBlock
1.3.6.1.4.1.6141.2.60.37.1.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-MSTP-MIB 41-3
wwpLeosMstpPathCostDefault
Description and OID
Status
The version of the Spanning Tree default Path Costs that are to be used by this current
Bridge. A value of 8021d1998(1) uses the 16-bit default Path Costs from IEEE
Std. 802.1D-1998. A value of stp8021t2001(2) uses the 32-bit default Path
Costs from IEEE Std. 802.1t.
Access
read-write
1.3.6.1.4.1.6141.2.60.37.1.1.9
wwpLeosMstpGlobalStpMode
Description and OID
Status
current
For devices that contain multiple STP code-bases, this object allows the
selection of the desired Spanning Tree Protocol code-base that is to be in
effect. After a new value is selected a configuration save and device reboot
must be performed for the new spanning tree code-base to take control over
spanning tree operations within the device. The value of rstp(1) selects legacy
RSTP code-base which is typically a highly optimized code-base intended for
devices that are connected to other RSTP equipped devices. The value of
mstp(2) selects the MSTP code-base which offers inherent backward
compatibility for RSTP devices. However this code-base is optimized for
MSTP operations and may not be desirable when the device is operating in a
network of only RSTP connected devices.
Access
read-write
1.3.6.1.4.1.6141.2.60.37.1.1.10
wwpLeosMstpPortCfgTable
Description and OID
Status
Table that contains configuration items for each port. This object has a value current
similar to dot1dStpPortTable.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.37.1.1.11
wwpLeosMstpPortCfgEntry
Description and OID
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.37.1.1.11.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
41-4 WWP-LEOS-MSTP-MIB
wwpLeosMstpPortInfoIndex
Description and OID
Status
This is the port number used as index in the table. The value of this port id is current
similar to dot1dStpPort.
Access
accessible-fornotify
1.3.6.1.4.1.6141.2.60.37.1.1.11.1.1
wwpLeosMstpPortEnable
Description and OID
Status
Access
When this object is set to true the mstp operation for this port is enabled.
Setting this object to false disables mstp operations on this port.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.37.1.1.11.1.2
wwpLeosMstpPortAdminExtPathCost
Description and OID
current
The administratively configurable external path cost. This object sets the
ExternalPortPathCost MSTP State Machine Performance Parameter when
configured to use manual port path cost values. This is used as the CIST
External Path Cost field for this port in BPDUs and used in vector calculations
for this port. The default value for this object is system dependent.
read-write
1.3.6.1.4.1.6141.2.60.37.1.1.11.1.3
wwpLeosMstpPortOperExtPathCost
Description and OID
Status
Access
current
The current operational external path cost for this port. Depending on the
configuration, this may be the administratively configured external path cost or
a value calculated by the system.
read-only
1.3.6.1.4.1.6141.2.60.37.1.1.11.1.4
wwpLeosMstpPortDynamicExtPathCost
Description and OID
Status
This attribute enables or disables dynamic calculation of the external path cost current
for the given port. Values of true or false enable or disable this feature,
respectively.
Access
read-write
1.3.6.1.4.1.6141.2.60.37.1.1.11.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-MSTP-MIB 41-5
wwpLeosMstpPortAdminEdgePort
Description and OID
Status
The administrative value of the Edge Port parameter. A value of true indicates current
that this port should be assumed as an edge-port and a value of false indicates
that this port should be assumed as a non-edge-port. The default value for this
object is system dependent.
Access
read-write
1.3.6.1.4.1.6141.2.60.37.1.1.11.1.6
wwpLeosMstpPortOperEdgePort
Description and OID
Status
Access
The operational value of the Edge Port parameter. The object is initialized to current
the value of wwpLeosMstpPortAdminEdgePort and is set to false on reception
of a BPDU.
read-only
1.3.6.1.4.1.6141.2.60.37.1.1.11.1.7
wwpLeosMstpPortProtocolMigration
Description and OID
Status
When set to true, this object forces a spanning tree migration check to initiate current
within the definitions of the spanning tree state machines per IEEE. Any other
operation on this object has no effect and it always returns false when read.
Access
read-write
1.3.6.1.4.1.6141.2.60.37.1.1.11.1.8
wwpLeosMstpPortAdminPointToPoint
Description and OID
Status
The administrative point-to-point status of the LAN segment attached to this current
port. A value of forceTrue indicates that this port should always be treated as
if it is connected to a point-to-point link. A value of forceFalse indicates that
this port should be treated as having a shared media connection. A value of
auto indicates that this port is considered to have a point-to-point link if it is an
Aggregator and all of its members are aggregatable, or if the MAC entity is
configured for full duplex operation, either through auto-negotiation or by
management means.
Access
read-write
1.3.6.1.4.1.6141.2.60.37.1.1.11.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
41-6 WWP-LEOS-MSTP-MIB
wwpLeosMstpPortOperPointToPoint
Description and OID
Status
Access
The operational point-to-point status of the LAN segment attached to this port. current
It indicates whether a port is considered to have a point-to-point connection or
not. The value is determined by management or by auto-detection, as
described in the wwpMtpPortAdminPointToPoint object.
read-only
1.3.6.1.4.1.6141.2.60.37.1.1.11.1.10
wwpLeosMstpPortAutoEdge
Description and OID
Status
The value of the autoEdge parameter used by MSTP to determine whether the current
value of wwpLeosMstpPortOperEdgePort should be set to the value of
wwpLeosMstpPortAdminEdgePort or if it should be set according to the logic
defined in the Bridge Detection state machine.
Access
read-write
1.3.6.1.4.1.6141.2.60.37.1.1.11.1.11
wwpLeosMstpPortRestrictedRole
Description and OID
Status
The value of the restrictedRole parameter used by MSTP. When true, the port current
is not selected as the root port for the CIST or any MSTI, even if it has the best
spanning tree priority vector. Such a port is selected as an alternate port after
the root port has been selected. When false, this port is allowed to be selected
as the root port.
Access
read-write
1.3.6.1.4.1.6141.2.60.37.1.1.11.1.12
wwpLeosMstpPortRestrictedTcn
Description and OID
Status
The value of the restrictedTcn parameter used by MSTP. When true, the port current
is not set to propagate received topology change notifications and topology
changes to other ports. When false, normal topology change notification
propagation occurs on the port.
Access
read-write
1.3.6.1.4.1.6141.2.60.37.1.1.11.1.13
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-MSTP-MIB 41-7
wwpLeosMstpMstCfgName
Description and OID
Status
The configuration name that identifies the MST region and is used as one of current
the inputs in the computation of the MST Configuration Identifier. MSTP uses
a fixed field of 32 characters when computing the MST Configuration Identifier
and in MSTP BPDUs, when this object is set to a string of characters less than
32 in length, MSTP fills in the remaining characters up to character number 32
with NULL octets (hex value 0x00). The default value for this object is the
Bridge MAC address represented as an ASCII character string in canonical
format, using upper-case hexadecimal letters and hyphens to represent the
48-bit Bridge MAC, with the remaining 15 characters containing the NULL
octet (hex value 0x00).
Access
read-write
1.3.6.1.4.1.6141.2.60.37.1.2.1
wwpLeosMstpMstCfgRevLevel
Description and OID
Status
Access
The value of this object is used by MSTP as the Revision Level field
transmitted in MSTP BPDUs and in the calculation of the MST Configuration
Identifier.
current
read-write
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.37.1.2.2
wwpLeosMstpMstCfgVlanTable
1.3.6.1.4.1.6141.2.60.37.1.2.3
wwpLeosMstpMstCfgVlanEntry
Description and OID
Each MST Configuration Table entry contains the MSTI to which the VLAN is current
mapped. When the MSTI value is zero, the VLAN is mapped to the CIST.
not-accessible
1.3.6.1.4.1.6141.2.60.37.1.2.3.1
wwpLeosMstpMstCfgVlanIndex
Description and OID
Status
Access
The VlanId for which this entry contains the CIST or MSTI mapping.
current
not-accessible
1.3.6.1.4.1.6141.2.60.37.1.2.3.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
41-8 WWP-LEOS-MSTP-MIB
wwpLeosMstpMstCfgMstiIndex
Description and OID
Status
current
An integer with values ranging from 0 to 64 that identify the CIST/MSTI
instance to which this VLAN is mapped. The value of zero means this VLAN
is mapped to the CIST, other values indicate an MSTI mapping for this VLAN.
Access
read-write
1.3.6.1.4.1.6141.2.60.37.1.2.3.1.2
wwpLeosMstpMstCfgXstMappingTable
Description and OID
Status
current
Table containing the VLAN to XST mapping information from
wwpLeosMstpMstCfgVlanTable in the format of VLAN- mappings per CIST/
MSTI. A single table entry exists for the CIST and one entry for each MSTI.
Each table entry contains VLAN mappings indicating the VLAN identifiers that
are associated with the CIST or the particular MSTI. This table is read-only and
is intended to provide management with an efficient method of retrieving the
VLAN/XST mapping information. To modify the information within this table,
the wwpLeosMstpMstCfgVlanTable should be used.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.37.1.2.4
wwpLeosMstpMstCfgXstMappingEntry
Description and OID
Status
A conceptual row containing a bitmap of all VLAN identifiers that are mapped current
to the CIST or specified MSTI. The mapping of VLAN identifiers to CIST or
MSTI is managed through the wwpLeosMstpMstCfgVlanTable.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.37.1.2.4.1
wwpLeosMstpMstCfgXstMappingIndex
Description and OID
Status
Uniquely identifies an instance. The entry of this table with index 0 represents current
the CIST. Non-zero index values represent a particular MSTI.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.37.1.2.4.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-MSTP-MIB 41-9
wwpLeosMstpMstCfgXstMapping1k
Description and OID
Status
Access
A string of octets containing one bit for each VLAN identifier. The first octet current
represents VLAN identifier values 0 through 7; the second octet represents
VLAN identifier values 8 through 15, etc. The most significant bit of each octet
corresponds to the lowest VLAN identifier value for that octet. This object
represents VLAN identifier values 0 through 1023. Note that the bit
representing VLAN identifier value 0 is always clear (bit value 0).
read-only
1.3.6.1.4.1.6141.2.60.37.1.2.4.1.2
wwpLeosMstpMstCfgXstMapping2k
Description and OID
Status
Access
A string of octets containing one bit for each VLAN identifier. The first octet current
represents VLAN identifier values 1024 through 1031; the second octet
represents VLAN identifier values 1032 through 1039, etc. The most
significant bit of each octet corresponds to the lowest VLAN identifier value for
that octet. This entire object represents VLAN identifier values 1024 through
2047.
read-only
1.3.6.1.4.1.6141.2.60.37.1.2.4.1.3
wwpLeosMstpMstCfgXstMapping3k
Description and OID
Status
Access
A string of octets containing one bit for each VLAN identifier. The first octet current
represents VLAN identifier values 2048 through 2055; the second octet
represents VLAN identifier values 2056 through 2063, etc. The most
significant bit of each octet corresponds to the lowest VLAN identifier value for
that octet. This entire object represents VLAN identifier values 2048 through
3071.
read-only
1.3.6.1.4.1.6141.2.60.37.1.2.4.1.4
wwpLeosMstpMstCfgXstMapping4k
Description and OID
Status
Access
A string of octets containing one bit for each VLAN identifier. The first octet current
represents VLAN identifier values 3072 through 3079; the second octet
represents VLAN identifier values 3080 through 3087, etc. The most
significant bit of each octet corresponds to the lowest VLAN identifier value for
that octet. This entire object represents VLAN identifier values 3072 through
4095. Note that the bit representing VLAN identifier value 4095 is always clear
(bit value 0).
read-only
1.3.6.1.4.1.6141.2.60.37.1.2.4.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
41-10 WWP-LEOS-MSTP-MIB
wwpLeosMstpMstCfgIdDigest
Description and OID
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.37.1.2.5
wwpLeosMstpXstCfgTable
Description and OID
Table containing CIST and MSTI configuration items for the bridge. The CIST current
is identified as index 0 and the MSTI entries use non-zero indices.
not-accessible
1.3.6.1.4.1.6141.2.60.37.1.3.1
wwpLeosMstpXstCfgEntry
Description and OID
Status
CIST or MSTI entry containing configuration items for the CIST or the specified current
MSTI.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.37.1.3.1.1
wwpLeosMstpXstCfgIndex
Description and OID
Status
The index number for this entry. Zero refers to the CIST and non-zero values current
refer to MSTI entries for this Bridge.
Access
accessible-fornotify
1.3.6.1.4.1.6141.2.60.37.1.3.1.1.1
wwpLeosMstpXstCfgBridgePriority
Description and OID
Status
The Bridge Priority value used by the multiple spanning tree protocol in vector current
calculations and in BPDUs. For the CIST, this value is used in the CIST Bridge
Identifier and for MSTIs this value is used in the MSTI Bridge Priority field of
BPDUs.
Access
read-create
1.3.6.1.4.1.6141.2.60.37.1.3.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-MSTP-MIB 41-11
wwpLeosMstpXstCfgStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete the
entry set this to 'destroy'.
Table rows representing MSTIs may be
created or deleted using this object.
The table row representing the
CIST (Index 0) always exists. An attempt to delete this row results in an SNMP
error.
Access
read-create
1.3.6.1.4.1.6141.2.60.37.1.3.1.1.3
wwpLeosMstpXstPortCfgTable
Description and OID
Status
Table of configuration items on a per-port per-CIST/MSTI basis. For each port, current
there is a single CIST (index 0) and multiple MSTIs (non-zero index values).
Access
not-accessible
1.3.6.1.4.1.6141.2.60.37.1.3.2
wwpLeosMstpXstPortCfgEntry
Description and OID
Status
Access
not-accessible
1.3.6.1.4.1.6141.2.60.37.1.3.2.1
wwpLeosMstpXstPortCfgPortIndex
Description and OID
Status
This is the port number used as index in the table. The value of this port id is current
similar to dot1dStpPort.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.37.1.3.2.1.1
wwpLeosMstpXstPortCfgXstIndex
Description and OID
Status
The CIST or MSTI index number for this port. Zero refers to the CIST and non- current
zero values refer to MSTI entries for this port.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.37.1.3.2.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
41-12 WWP-LEOS-MSTP-MIB
wwpLeosMstpXstPortCfgPortPriority
Description and OID
Status
The port priority for this port used in vector calculations and BPDUs. For the current
CIST for this port, this value is the priority component of the CIST Port Priority.
For MSTI entries for this port, this value is the MSTI Port Priority.
Access
read-write
1.3.6.1.4.1.6141.2.60.37.1.3.2.1.3
wwpLeosMstpXstPortCfgAdminIntPathCost
Description and OID
Status
The administratively configurable internal path cost. For the CIST for this port, current
this value is the CIST Internal Root Path Cost. For MSTI entries for this port,
this value is the MSTI Internal Root Path Cost. The default value for this object
is system dependent.
Access
read-write
1.3.6.1.4.1.6141.2.60.37.1.3.2.1.4
wwpLeosMstpXstPortCfgOperIntPathCost
Description and OID
Status
Access
The current operational internal path cost for either the CIST or the specified current
MSTI. Depending on the configuration this value may be the administratively
configured internal path cost or some other value determined by the system.
read-only
1.3.6.1.4.1.6141.2.60.37.1.3.2.1.5
wwpLeosMstpXstPortCfgDynamicIntPathCost
Description and OID
Status
This attribute enables or disables dynamic calculation of the internal path cost current
for the given port. When the XstIndex is zero, this applies to the CIST Internal
Root Path Cost. When the XstIndex is non-zero, this applies to the specified
MSTI Internal Root Path Cost. Values of true or false enable or disable this
feature, respectively.
Access
read-write
1.3.6.1.4.1.6141.2.60.37.1.3.2.1.6
wwpLeosMstpBridgeStatsClear
Description and OID
Status
This object allows all MSTP bridge statistics to be cleared. Setting this object current
to true resets all statistics maintained under the wwpLeosMstpStats branch to
a value of zero. Setting this object to false has no effect. This object always
returns a value of false.
Access
read-write
1.3.6.1.4.1.6141.2.60.37.1.4.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-MSTP-MIB 41-13
wwpLeosMstpPortStatsTable
Description and OID
Status
Access
A table that contains MSTP statistical information about each port that is
associated with this bridge.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.37.1.4.2
wwpLeosMstpPortStatsEntry
1.3.6.1.4.1.6141.2.60.37.1.4.2.1
wwpLeosMstpPortStatsIndex
Description and OID
This is the port number used as index in the table. The value of this port id is current
similar to dot1dStpPort.
not-accessible
1.3.6.1.4.1.6141.2.60.37.1.4.2.1.1
wwpLeosMstpPortStatsClear
Description and OID
Status
current
This object allows the port statistics contained within this table entry to be
cleared. Setting this object to true will reset all statistics for this port to a value
of zero. Setting this object to false has no effect. This object always returns a
value of false.
Access
read-write
1.3.6.1.4.1.6141.2.60.37.1.4.2.1.2
wwpLeosMstpPortStatsRxTcnBpdu
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.37.1.4.2.1.3
wwpLeosMstpPortStatsRxCfgBpdu
1.3.6.1.4.1.6141.2.60.37.1.4.2.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
41-14 WWP-LEOS-MSTP-MIB
wwpLeosMstpPortStatsRxRstBpdu
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.37.1.4.2.1.5
wwpLeosMstpPortStatsRxMstBpdu
1.3.6.1.4.1.6141.2.60.37.1.4.2.1.6
wwpLeosMstpPortStatsTxTcnBpdu
1.3.6.1.4.1.6141.2.60.37.1.4.2.1.7
wwpLeosMstpPortStatsTxCfgBpdu
1.3.6.1.4.1.6141.2.60.37.1.4.2.1.8
wwpLeosMstpPortStatsTxRstBpdu
1.3.6.1.4.1.6141.2.60.37.1.4.2.1.9
wwpLeosMstpPortStatsTxMstBpdu
1.3.6.1.4.1.6141.2.60.37.1.4.2.1.10
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-MSTP-MIB 41-15
wwpLeosMstpNewRootNotification
The wwpLeosMstpNewRootNotification indicates that the sending agent has
become the new root of the Spanning Tree for the specified XST (CIST or
MSTI). This notification is generated when the Port Role Selection state
machine invokes the updtRolesTree procedure and this procedure operation
results in a calculation of a Root Priority Vector for the XST which results in a
value indicating that the bridge itself has become the root bridge for the XST.
Variable bindings include: wwpLeosMstpXstCfgIndex.
Object Identifier: 1.3.6.1.4.1.6141.2.60.37.0.1
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosMstpTopologyChangeNotification
A wwpLeosMstpTopologyChangeNotification is sent by a bridge for the
specified XST when the Topology Change state machine invokes the
newTcWhile procedure which causes the tcWhile timer for the specified port
and XST to change from a zero value to a non-zero value. Variable bindings
include: wwpLeosMstpPortInfoIndex, and wwpLeosMstpXstCfgIndex.
Object Identifier: 1.3.6.1.4.1.6141.2.60.37.0.2
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosMstpPortBackupNotification
A wwpLeosMstpPortBackupNotification is sent whenever the MSTP state
machine logic determines that a loop has occurred and the received vector
information represents another port on the same device. This notification is
sent when the updtRolesTree procedure determines that the designated
bridge and designated port components of the port priority vector reflect
another port on this bridge which results in the selectedRole parameter for the
CIST to transition to BackupPort. Variable bindings include:
wwpLeosMstpPortInfoIndex.
Object Identifier: 1.3.6.1.4.1.6141.2.60.37.0.3
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
41-16 WWP-LEOS-MSTP-MIB
wwpLeosMstpPvstBpduReceivedNotification
A wwpLeosMstpPvstBpduReceivedNotification is sent to indicate that one or
more PVST BPDUs have been received on the port in the past 60 seconds.
Each minute, all ports are checked for reception of one or more PVST BPDUs
and this notification is generated if any PVST BPDUs have been received.
Variable bindings include: wwpLeosMstpPortInfoIndex.
Object Identifier: 1.3.6.1.4.1.6141.2.60.37.0.4
Status: deprecated
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosMstpSelfLoopNotification
A wwpLeosMstpSelfLoopNotification is sent whenever device detects same
cable connected to a port in a loop back. This determination is made by
comparing the layer-2 address of the received frame with that of the bridge.
This occurs before the frame data reaches the MSTP state machine logic.
Also if loop-back blocking is enabled on the device then mstp blocks this port
(self disable). Variable bindings include: wwpLeosMstpPortInfoIndex.
Object Identifier: 1.3.6.1.4.1.6141.2.60.37.0.5
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosMstpPortOperEdgeNotification
A wwpLeosMstpPortOperEdgeNotification is sent whenever the MSTP state
machine logic causes a change in the operEdge parameter associated with
the specified port. Variable bindings include: wwpLeosMstpPortInfoIndex and
wwpLeosMstpPortOperEdgePort.
Object Identifier: 1.3.6.1.4.1.6141.2.60.37.0.6
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-MSTP-MIB 41-17
wwpLeosMstpPortFlapNotification
A wwpLeosMstpPortFlapNotification is sent whenever device detects a port
flapping. This notification is generated under following criteria. If device
detects port flapped more than once within 1 minute timer period and it has
not sent notification within last 5 minutes then it generates this notification.
Variable bindings include: wwpLeosMstpPortInfoIndex.
Object Identifier: 1.3.6.1.4.1.6141.2.60.37.0.7
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosMstpBridgeRootPortLostNotification
A wwpLeosMstpBridgeRootPortLostNotification is sent whenever device
detects that bridge root port is lost for a particular XST (CIST or MSTI). This
notification is generated when a link has gone down and the role parameter
for the CIST or any MSTI for that port is set to Root Port. This notification
indicates either the link failure or link partner MSTP disabled. Variable
bindings include: wwpLeosMstpPortInfoIndex and
wwpLeosMstpXstCfgIndex.
Object Identifier: 1.3.6.1.4.1.6141.2.60.37.0.8
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
MIB Reference
009-3220-011 Standard Revision A
August 2013
42-1
WWP-LEOS-MULTICAST-FILTER-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-MULTICAST-FILTER-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosMcastConfigState
Description and OID
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.7.1.1.1
wwpLeosMcastFilterActivationTable
Description and OID
The (conceptual) table listing the VLANs on which the multicast filter can be current
applied. This table is used to create and delete entries in the multicast table
and also to administratively enable/disable. To configure the IGMP Snooping
on this VLAN use table wwpLeosMcastIgmpSnoopTable after creating entry in
this (wwpLeosMcastFilterActivationTable) table.
not-accessible
1.3.6.1.4.1.6141.2.60.7.1.1.2
wwpLeosMcastFilterActivationEntry
Description and OID
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.7.1.1.2.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
42-2 WWP-LEOS-MULTICAST-FILTER-MIB
wwpLeosMcastVlanId
Description and OID
Status
Access
current
read-only
Status
Access
current
read-write
Status
Access
This object represents the operational state of multicast on the given VLAN.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.7.1.1.2.1.1
wwpLeosMcastFilterAdminState
1.3.6.1.4.1.6141.2.60.7.1.1.2.1.2
wwpLeosMcastFilterOperState
1.3.6.1.4.1.6141.2.60.7.1.1.2.1.3
wwpLeosMcastFilterState
Description and OID
Setting this object to createandgo(4) creates an entry in the multicast table for current
the given VLAN and enables multicast on that VLAN. Setting this object to
destroy deletes the entry from the multicast table.
read-create
1.3.6.1.4.1.6141.2.60.7.1.1.2.1.4
wwpLeosMcastFilterServerPortTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.7.1.1.3
wwpLeosMcastFilterServerPortEntry
1.3.6.1.4.1.6141.2.60.7.1.1.3.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-MULTICAST-FILTER-MIB 42-3
wwpLeosMcastServerPortId
Description and OID
Status
Access
The server port from which the IGMP query messages can be received, and current
joins/leaves messages can be sent.
read-only
1.3.6.1.4.1.6141.2.60.7.1.1.3.1.1
wwpLeosMcastServerPortStatus
Description and OID
Status
This object is used to add/delete server ports from the list of authorized server current
ports. To add a port to the authorized server port list, a user must set this
object to 'createAndGo'.
Access
read-create
1.3.6.1.4.1.6141.2.60.7.1.1.3.1.2
wwpLeosMcastIgmpSnoopTable
Description and OID
Status
Access
The (conceptual) table listing the configuration parameters for the IGMP
snooping.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
For LEOS (4.x) IGMP snooping can be enabled on this VLAN by setting this
object to 'true'. The Management station should define the router IP address
range and the list of server ports before snooping is enabled. SAOS (6.x)
does not support setting IGMP snooping per VLAN. Instead it should be
enabled globally using the wwpLeosMcastSnoopState MIB object.
current
read-write
1.3.6.1.4.1.6141.2.60.7.1.1.4
wwpLeosMcastIgmpSnoopEntry
1.3.6.1.4.1.6141.2.60.7.1.1.4.1
wwpLeosMcastIgmpSnoopEnable
1.3.6.1.4.1.6141.2.60.7.1.1.4.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
42-4 WWP-LEOS-MULTICAST-FILTER-MIB
wwpLeosMcastIgmpSnoopRobustness
Description and OID
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.7.1.1.4.1.2
wwpLeosMcastIgmpSnoopProxyQueryInterval
Description and OID
current
The interval period between each general query sent to the router. This
parameter specifies how often to repeat the group specific query. Default
value is 125 seconds. Note that the actual rate may be slower when the switch
becomes busy, so this parameter should be thought of as a minimum time
interval.
read-write
1.3.6.1.4.1.6141.2.60.7.1.1.4.1.3
wwpLeosMcastIgmpSnoopProxyQueryReplyTmo
Description and OID
Status
The amount of time to receive a membership report after a query message is current
sent. This value goes directly into the query packet.
Access
read-write
1.3.6.1.4.1.6141.2.60.7.1.1.4.1.4
wwpLeosMcastIgmpSnoopProxyQueryDelay
Description and OID
Status
Access
The amount of time to wait before sending the next group specific query
downstream. General queries are sent one port at a time.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.7.1.1.4.1.5
wwpLeosMcastIgmpSnoopLingerTmo
Description and OID
This value specifies the amount of time that a multicast filter is in place after current
the last host has left. In essence it configures how long to filter the stream
after all the hosts have left
the group. This can tune the system as to how
long the router has to remove the stream from the subnet. The minimum value
is 1 second, with no maximum value.
read-write
1.3.6.1.4.1.6141.2.60.7.1.1.4.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-MULTICAST-FILTER-MIB 42-5
wwpLeosMcastIgmpQueryEngineState
Description and OID
Status
Access
current
read-write
Status
Access
Setting this object sets the source IP address for the VLAN.
current
read-write
Status
Access
Setting this object sets the router query interval for the given VLAN.
current
read-write
Status
Access
Setting this object sets the minimum response time for the given VLAN.
current
read-write
Status
Access
Setting this object sets the default router port for the given VLAN.
current
read-write
Status
Access
Setting this object sets the IGMP inquisitive leave state for the given VLAN.
current
read-write
1.3.6.1.4.1.6141.2.60.7.1.1.4.1.7
wwpLeosMcastIgmpProxyQuerySrcIp
1.3.6.1.4.1.6141.2.60.7.1.1.4.1.8
wwpLeosMcastIgmpRouterQueryInterval
1.3.6.1.4.1.6141.2.60.7.1.1.4.1.9
wwpLeosMcastIgmpMinResponseTime
1.3.6.1.4.1.6141.2.60.7.1.1.4.1.10
wwpLeosMcastIgmpDefaultRouterPort
1.3.6.1.4.1.6141.2.60.7.1.1.4.1.11
wwpLeosMcastIgmpInquisitiveLeaveState
1.3.6.1.4.1.6141.2.60.7.1.1.4.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
42-6 WWP-LEOS-MULTICAST-FILTER-MIB
wwpLeosMcastIgmpLastMemberQueryInterval
Description and OID
Status
Setting this object sets the last membership query interval for the given VLAN. current
Access
read-write
1.3.6.1.4.1.6141.2.60.7.1.1.4.1.13
wwpLeosMcastIgmpPriority
Description and OID
Status
Access
Setting this object sets the priority if IGMP packets for this VLAN.
current
read-write
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.7.1.1.4.1.14
wwpLeosMcastIgmpSnoopRouterRangeStartIpAddr
1.3.6.1.4.1.6141.2.60.7.1.1.4.1.15
wwpLeosMcastIgmpSnoopRouterRangeEndIpAddr
Description and OID
The last IP Address of the router IP Address range. When range is undefined, current
all leave/join messages are forwarded to the router even when the multicast
stream does not originate from the router. If the range is defined, leave/join
messages are filtered. The default value for this object should be equal to the
value of wwpLeosMcastIgmpSnoopRouterRangeStartIpAddr.
read-write
1.3.6.1.4.1.6141.2.60.7.1.1.4.1.16
wwpLeosMcastIgmpSnoopActiveLingerTimeout
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.7.1.1.4.1.17
wwpLeosMcastIgmpSnoopServerTopology
1.3.6.1.4.1.6141.2.60.7.1.1.4.1.18
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-MULTICAST-FILTER-MIB 42-7
wwpLeosMcastIgmpSnoopRapidRecoveryMode
Description and OID
Status
Specifies whether the rapid recovery mode is set to on or off. If this object is current
set to ON then the device generates and accepts query packets with source IP
= 0 else in the OFF state, it does not.
Access
read-write
1.3.6.1.4.1.6141.2.60.7.1.1.4.1.19
wwpLeosMcastChannelStreamTable
Description and OID
Status
Access
The (conceptual) table listing the configuration parameters for the multicast
channel stream.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.7.1.1.5
wwpLeosMcastChannelStreamEntry
1.3.6.1.4.1.6141.2.60.7.1.1.5.1
wwpLeosMcastChanelStreamStartGroupAddr
1.3.6.1.4.1.6141.2.60.7.1.1.5.1.1
wwpLeosMcastChanelStreamEndGroupAddr
Description and OID
The last IP Address of the multicast IP address range. If range does not need current
to be specified then do not set this value.
read-write
1.3.6.1.4.1.6141.2.60.7.1.1.5.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
42-8 WWP-LEOS-MULTICAST-FILTER-MIB
wwpLeosMcastChannelStreamStatus
Description and OID
Status
This object is used to add/delete multicast groups to the channel stream. To current
add a multicast group to the channel stream, a user must set this object to
'createAndGo'. The device does not allow the user to create the entry unless
'wwpLeosMcastChanelStreamStartGroupAddr' is specified. If range needs to
be specified then set 'wwpLeosMcastChanelStreamEndGroupAddr' to the
desired group address. If the device cannot create the entry for any of the IP
addresses within the range then no entry is created and an error is returned.
Access
read-create
1.3.6.1.4.1.6141.2.60.7.1.1.5.1.3
wwpLeosMcastFilterConfigTable
Description and OID
Status
Access
The (conceptual) table listing the VLANs on which the UPF can be applied.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.7.1.1.6
wwpLeosMcastFilterConfigEntry
1.3.6.1.4.1.6141.2.60.7.1.1.6.1
wwpLeosMcastFilterUPFActivate
1.3.6.1.4.1.6141.2.60.7.1.1.6.1.1
wwpLeosMcastUnresolvedAction
Description and OID
current
Setting this object to 'flood' causes the device to flood all the unresolved
messages to all the ports in the VLAN. Setting this object to 'drop' causes the
device to drop all the unresolved messages. If an IGMP join is received with
a matching multicast group address, the multicast stream forwards to the
corresponding port.
read-write
1.3.6.1.4.1.6141.2.60.7.1.1.6.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-MULTICAST-FILTER-MIB 42-9
wwpLeosMcastFilterWKMFLocalActivate
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.7.1.1.6.1.3
wwpLeosMcastFilterWKMFInternetActivate
1.3.6.1.4.1.6141.2.60.7.1.1.6.1.4
wwpLeosMcastFilterWKMFAdhocActivate
1.3.6.1.4.1.6141.2.60.7.1.1.6.1.5
wwpLeosMcastFilterWKMFStMulticastActivate
Description and OID
Setting the object to 'flood' enables flooding of st-multicast WKMF on a VLAN. current
Setting the object to 'drop' enables dropping of st-multicast WKMF on a VLAN.
Multicast address belonging to this object is 224.1.x.x.
read-write
1.3.6.1.4.1.6141.2.60.7.1.1.6.1.6
wwpLeosMcastFilterWKMFSdpSapActivate
Description and OID
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.7.1.1.6.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
42-10 WWP-LEOS-MULTICAST-FILTER-MIB
wwpLeosMcastChannelStreamExPortMemTable
Description and OID
Status
Access
The (conceptual) table listing the excluded port list per VLAN for channel
stream.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-create
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.7.1.1.7
wwpLeosMcastChannelStreamExPortMemEntry
1.3.6.1.4.1.6141.2.60.7.1.1.7.1
wwpLeosMcastChannelStreamExPortId
1.3.6.1.4.1.6141.2.60.7.1.1.7.1.1
wwpLeosMcastChannelStreamExPortMemStatus
1.3.6.1.4.1.6141.2.60.7.1.1.7.1.2
wwpLeosMcastSnoopState
1.3.6.1.4.1.6141.2.60.7.1.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-MULTICAST-FILTER-MIB 42-11
wwpLeosMcastGlobalStatsClear
Description and OID
Status
Setting this object to clear(1) clears the statistics for all the multicast service current
filter entries. This object cannot be set to none. It is for display purposes only.
Access
read-write
1.3.6.1.4.1.6141.2.60.7.1.1.10
wwpLeosMcastGroupTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.7.1.2.1
wwpLeosMcastGroupEntry
1.3.6.1.4.1.6141.2.60.7.1.2.1.1
wwpLeosMcastGroupAddr
1.3.6.1.4.1.6141.2.60.7.1.2.1.1.1
wwpLeosMcastState
1.3.6.1.4.1.6141.2.60.7.1.2.1.1.2
wwpLeosMcastType
1.3.6.1.4.1.6141.2.60.7.1.2.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
42-12 WWP-LEOS-MULTICAST-FILTER-MIB
wwpLeosMcastSource
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The (conceptual) table listing all the port members of the multicast groups.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
The router port from which the IGMP query messages are received, and joins/ current
leaves messages are sent.
read-only
1.3.6.1.4.1.6141.2.60.7.1.2.1.1.4
wwpLeosMcastMemberCount
1.3.6.1.4.1.6141.2.60.7.1.2.1.1.5
wwpLeosMcastGroupMemberTable
1.3.6.1.4.1.6141.2.60.7.1.2.2
wwpLeosMcastGroupMemberEntry
1.3.6.1.4.1.6141.2.60.7.1.2.2.1
wwpLeosMcastPortId
Description and OID
1.3.6.1.4.1.6141.2.60.7.1.2.2.1.1
wwpLeosMcastPortTagId
Description and OID
Status
Access
The Virtual Lan Tag Id used by the port on this Virtual Lan. If the switch is being current
used as a traditional Layer 2 device, then the value of this object should be
same as wwpLeosMcastVlanId.
read-only
1.3.6.1.4.1.6141.2.60.7.1.2.2.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-MULTICAST-FILTER-MIB 42-13
wwpLeosMcastFilterStatsTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.7.1.3.1
wwpLeosMcastFilterStatsEntry
1.3.6.1.4.1.6141.2.60.7.1.3.1.1
wwpLeosMcastStaticGrpCount
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.1
wwpLeosMcastDynamicGrpCount
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.2
wwpLeosMcastJoinMessages
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.3
wwpLeosMcastLeaveMessages
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
42-14 WWP-LEOS-MULTICAST-FILTER-MIB
wwpLeosMcastQueryMessages
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The total number of timeouts waiting for the router to send query.
current
read-only
Status
Access
current
read-only
Status
Access
The total number of messages discarded by the router. This happens when
join comes in from a router port.
current
read-only
Status
Access
The total number of messages discarded by the host. This happens when a
join/leave comes in from a port, but no router port is established.
current
read-only
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.5
wwpLeosMcastQueryDiscards
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.6
wwpLeosMcastQueryTimeouts
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.7
wwpLeosMcastUnknownPktType
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.8
wwpLeosMcastRouterDiscards
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.9
wwpLeosMcastHostDiscards
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-MULTICAST-FILTER-MIB 42-15
wwpLeosMcastBadChecksum
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The total number of group members for all groups in the given VLAN.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.11
wwpLeosMcastL2L3Mismatch
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.12
wwpLeosMcastTotalMembers
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.13
wwpLeosMcastLingerCount
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.14
wwpLeosMcastRouterSrcMacAddr
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.15
wwpLeosMcastRouterSrcIpAddr
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.16
MIB Reference
009-3220-011 Standard Revision A
August 2013
42-16 WWP-LEOS-MULTICAST-FILTER-MIB
wwpLeosMcastRouterPortId
Description and OID
Status
Access
current
read-only
Status
Access
The obejct specifies the port number of the port where IGMP reports are sent. current
Not always the same as the router port.
read-only
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.17
wwpLeosMcastReportSendPortId
Description and OID
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.18
wwpLeosMcastStatsClear
Description and OID
Status
Setting this object to clear(1) clears the statistics for only the associated VLAN current
ID. This object cannot be set to none, it is for display purposes only.
Access
read-write
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.19
wwpLeosMcastStatsQuerySrcIpZeroDiscard
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.20
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
wwpLeosMcastAddrOverlapNotification
A wwpLeosMcastAddrOverlapNotification is sent whenever several multicast
IP addresses overlap (matches the same L2 address). No variable bindings
are supported.
Object Identifier: 1.3.6.1.4.1.6141.2.60.7.2.0.1
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
MIB Reference
009-3220-011 Standard Revision A
August 2013
43-1
WWP-LEOS-NTP-CLIENT-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-NTP-CLIENT-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosNtpClientState
Description and OID
Status
Access
Setting this object to 'enable' enables the NTP client on Ciena devices.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.18.1.1.1
wwpLeosNtpClientMode
Description and OID
Setting this object to 'broadcast' causes the client to not poll the NTP server at current
all. Instead, it waits for configured NTP servers to broadcast their current time.
When the client receives the first message, it retrieves a reliable time from that
server. If it is set to polling then device polls the NTP server.
read-write
1.3.6.1.4.1.6141.2.60.18.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
43-2 WWP-LEOS-NTP-CLIENT-MIB
wwpLeosNtpClientPollFreq
Description and OID
Status
The polling frequency (interval in seconds) at which NTP server is polled if the current
NTP client is configured to be in polling mode. The value of this object should
only be a power of 2. The NTP client accepts the following values 2^4(16
seconds) to 2^12(4096 seconds). Values entered not equal to a power of 2 in
the valid range is rounded down to the nearest power. The change in the NTP
mode is only effective when NTP client is enabled. Setting this value sets
wwpLeosNtpClientMinPollFreq and wwpLeosNtpClientMaxPollFreq to the
same value. This should not be set at the same time that either
wwpLeosNtpClientMinPollFreq or wwpLeosNtpClientMaxPollFreq are set.
Access
read-write
1.3.6.1.4.1.6141.2.60.18.1.1.3
wwpLeosNtpClientTable
Description and OID
Status
current
Table of NTP server information indexed by wwpLeosNtpServerIndex. To
create an entry in the table, use SNMP multiple set operation and following
objects must be set: wwpLeosNtpServerAddr and wwpLeosNtpServerStatus.
To use MD5 authentication, wwpLeosNtpServerKeyId must be set at the time
of creation along with wwpLeosNtpServerAddr and wwpLeosNtpServerStatus,
otherwise no MD5 authentication is used.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.18.1.1.4
wwpLeosNtpClientEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.18.1.1.4.1
wwpLeosNtpServerIndex
1.3.6.1.4.1.6141.2.60.18.1.1.4.1.1
wwpLeosNtpServerAddrType
1.3.6.1.4.1.6141.2.60.18.1.1.4.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-NTP-CLIENT-MIB 43-3
wwpLeosNtpServerAddr
Description and OID
Status
Access
current
read-write
Status
Access
current
Specifies the resolved IP address if wwpLeosNtpServerAddr is set to host
name. If wwpLeosNtpServerAddr is set to IP address then
wwpLeosNtpServerResolvedAddr is the same as wwpLeosNtpServerAddr. If
the IP address is an IPv6, this OID is set to 0.0.0.0 and the
wwpLeosNtpServerAddrType is set to other(0).
read-only
1.3.6.1.4.1.6141.2.60.18.1.1.4.1.3
wwpLeosNtpServerResolvedAddr
Description and OID
1.3.6.1.4.1.6141.2.60.18.1.1.4.1.4
wwpLeosNtpServerUserPri
Description and OID
Status
This object is no longer implemented as the NTP client determines the server's deprecated
relative priority or preference relative to other configured servers. Reads
always return 1 and writes are quietly ignored. This object was once used to
specify the user priority of the wwpLeosNtpServerAddr.
Access
read-write
1.3.6.1.4.1.6141.2.60.18.1.1.4.1.5
wwpLeosNtpServerDhcpPri
Description and OID
Status
This object is no longer implemented as the NTP client determines the server's deprecated
relative priority or preference relative to other configured servers. Reads
always return 1 and writes are quietly be ignored. This object was once used
to specify the dhcp priority of the wwpLeosNtpServerAddr.
Access
read-only
1.3.6.1.4.1.6141.2.60.18.1.1.4.1.6
wwpLeosNtpServerUserAdminState
Description and OID
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.18.1.1.4.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
43-4 WWP-LEOS-NTP-CLIENT-MIB
wwpLeosNtpServerScope
Description and OID
Status
Access
This object is used to specify the from where the configuration was set. The
scope indicates scopeif the entry is configured by dhcp, user, or both.
current
read-only
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.18.1.1.4.1.8
wwpLeosNtpServerOperState
1.3.6.1.4.1.6141.2.60.18.1.1.4.1.9
wwpLeosNtpServerStatus
Description and OID
To create a row in this table, set this object to 'createAndGo'. The server added current
only becomes effective when NTP client is enabled.
To create an entry in
the table, use the SNMP multiple set operation
The following objects must
be set:
wwpLeosNtpServerAddr and wwpLeosNtpServerStatus.
read-create
1.3.6.1.4.1.6141.2.60.18.1.1.4.1.10
wwpLeosNtpServerKeyId
Description and OID
Status
This object is used to specify the MD5 key ID that the server uses. A 0 key ID current
implies no MD5 key.
Access
read-write
1.3.6.1.4.1.6141.2.60.18.1.1.4.1.11
wwpLeosNtpServerState
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.18.1.1.4.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-NTP-CLIENT-MIB 43-5
wwpLeosNtpServerResolvedInetAddrType
Description and OID
Status
Access
current
read-only
Status
Access
current
Specifies the resolved IP address if wwpLeosNtpServerAddr is set to host
name. If wwpLeosNtpServerAddr is set to IP address then
wwpLeosNtpServerResInetAddr is the same as wwpLeosNtpServerAddr. The
InetAddress specified here is compliant with RFC 4001.
read-only
1.3.6.1.4.1.6141.2.60.18.1.1.4.1.13
wwpLeosNtpServerResolvedInetAddr
Description and OID
1.3.6.1.4.1.6141.2.60.18.1.1.4.1.14
wwpLeosNtpAuthTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This object specifies the key ID. It is also used as index in the table.
current
not-accessible
Status
Access
Used to specify the MD5 key to use with this key identifier.
current
read-write
1.3.6.1.4.1.6141.2.60.18.1.1.5
wwpLeosNtpAuthEntry
1.3.6.1.4.1.6141.2.60.18.1.1.5.1
wwpLeosNtpAuthKeyId
1.3.6.1.4.1.6141.2.60.18.1.1.5.1.1
wwpLeosNtpAuthMd5Key
1.3.6.1.4.1.6141.2.60.18.1.1.5.1.2
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
43-6 WWP-LEOS-NTP-CLIENT-MIB
wwpLeosNtpAuthRowStatus
Description and OID
Status
To create a row in this table, set this object to 'createAndGo'. The server added current
only becomes effective when NTP client is enabled.
To create an entry in
the table, use the SNMP multiple set operation
The following objects must
be set:
wwpLeosNtpAuthKeyId and either wwpLeosNtpAuthMd5Key or
wwpLeosNtpAuthMD5KeyEnc.
Access
read-create
1.3.6.1.4.1.6141.2.60.18.1.1.5.1.3
wwpLeosNtpAuthMD5KeyEnc
Description and OID
Status
Access
Used to specify the encrypted MD5 key to use with this key identifier.
current
read-write
Status
Access
current
read-write
Status
Access
The Drift in micro-seconds of the local clock. This value is only valid when NTP current
client is enabled and has a valid peer.
read-only
1.3.6.1.4.1.6141.2.60.18.1.1.5.1.4
wwpLeosNtpClientMD5State
1.3.6.1.4.1.6141.2.60.18.1.1.6
wwpLeosNtpClientDrift
Description and OID
1.3.6.1.4.1.6141.2.60.18.1.1.7
wwpLeosNtpClientFastOffset
Description and OID
Status
Access
The Fastest Offset seen in micro-seconds of the local clock. This value is only current
valid when NTP client is enabled and has a valid peer.
read-only
1.3.6.1.4.1.6141.2.60.18.1.1.9
wwpLeosNtpClientSlowOffset
Description and OID
Status
Access
The Slowest Offset seen in micro-seconds of the local clock. This value is only current
valid when NTP is enabled and has a valid peer.
read-only
1.3.6.1.4.1.6141.2.60.18.1.1.10
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-NTP-CLIENT-MIB 43-7
wwpLeosNtpClientMinPollFreq
Description and OID
Status
The polling frequency (interval in seconds) at which NTP server is polled if the current
NTP client is configured to be in polling mode and is not currently synchronized
to an NTP server. The value of this object should only be a power of 2. The
NTP client accepts the following values 2^4(16 seconds) to 2^12(4096
seconds). Values entered not equal to a power of 2 in the valid range is
rounded down to the nearest power. The change in the NTP mode is only
effective if the NTP client is enabled. It should not be set at the same time
wwpLeosNtpClientPollFreq is set.
Access
read-write
1.3.6.1.4.1.6141.2.60.18.1.1.11
wwpLeosNtpClientMaxPollFreq
Description and OID
Status
The polling frequency (interval in seconds) at which NTP server is polled if the current
NTP client is configured to be in polling mode and is currently synchronized to
an NTP server. The value of this object should only be a power of 2. The NTP
client accepts the following values 2^4(16 seconds) to 2^12(4096 seconds).
Values entered not equal to a power of 2 in the valid range are rounded down
to the nearest power. The change in the NTP mode is only effective if the NTP
client is enabled. It should not be set at the same time
wwpLeosNtpClientPollFreq is set.
Access
read-write
1.3.6.1.4.1.6141.2.60.18.1.1.12
wwpLeosNtpClientOffset
Description and OID
Status
Access
When NTP client is synchronized, this contains the difference between the
reference clock and the system clock in micro-seconds.
deprecated
read-only
Status
Access
When NTP client is synchronized, this indicates the round trip time in micro- current
seconds taken by the reply packet to return in response, to a query sent by the
NTP server.
read-only
1.3.6.1.4.1.6141.2.60.18.1.1.13
wwpLeosNtpClientDelay
Description and OID
1.3.6.1.4.1.6141.2.60.18.1.1.14
MIB Reference
009-3220-011 Standard Revision A
August 2013
43-8 WWP-LEOS-NTP-CLIENT-MIB
wwpLeosNtpClientJitter
Description and OID
Status
Access
current
read-only
Status
Access
When NTP is synchronized, this contains the difference between the reference current
clock and the system clock micro-seconds.
read-only
1.3.6.1.4.1.6141.2.60.18.1.1.15
wwpLeosNtpClientNtpOffset
Description and OID
1.3.6.1.4.1.6141.2.60.18.1.1.16
wwpLeosNtpClientNtpFastStartMode
Description and OID
Status
Setting this object to 'on' causes the NTP client to set it's time to the first reply current
received from a synchronized NTP server, the first time this occurs after the
NTP client is enabled. After that, the normal rules for selecting and
synchronizing to a server are used.
Access
read-write
1.3.6.1.4.1.6141.2.60.18.1.1.17
wwpLeosNtpMulticastTable
Description and OID
Status
Access
not-accessible
1.3.6.1.4.1.6141.2.60.18.1.1.18
wwpLeosNtpMulticastEntry
Description and OID
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.18.1.1.18.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-NTP-CLIENT-MIB 43-9
wwpLeosNtpMulticastIndex
Description and OID
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.18.1.1.18.1.1
wwpLeosNtpMulticastInetAddrType
Description and OID
read-write
1.3.6.1.4.1.6141.2.60.18.1.1.18.1.2
wwpLeosNtpMulticastInetAddr
Description and OID
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.18.1.1.18.1.3
wwpLeosNtpMulticastRowStatus
Description and OID
To create a row in this table, set this object to 'createAndGo'. To create entry current
in the table use the SNMP multiple set operation.
The following objects
must be set: wwpLeosNtpMulticastInetAddrType,
wwpLeosNtpMulticastInetAddr and wwpLeosNtpMulticastRowStatus.
read-create
1.3.6.1.4.1.6141.2.60.18.1.1.18.1.4
wwpLeosNtpClientSyncChangeNotifAdminState
Description and OID
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.18.1.1.19
MIB Reference
009-3220-011 Standard Revision A
August 2013
43-10 WWP-LEOS-NTP-CLIENT-MIB
wwpLeosNtpClientDriftClear
Description and OID
Status
Set to true to clear the drift value used by the NTP client. When read, the value current
of this object is always false.
Access
read-write
1.3.6.1.4.1.6141.2.60.18.1.1.20
wwpLeosNtpClientDriftPPB
Description and OID
Status
Access
The frequency error in the local clock as expressed in parts per billion. This
value is only valid when NTP client is enabled and has a valid peer.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.18.1.1.21
wwpLeosNtpClientSyncState
1.3.6.1.4.1.6141.2.60.18.1.2.1
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
wwpLeosNtpClientSyncStatusChangeNotification
This notification is sent whenever there is a change in the synchronization
state for the NTP client. wwpLeosNtpClientSyncChangeNotifAdminState
should be enabled to receive this trap. Variable bindings include:
awwpLeosNtpClientSyncState.
Object Identifier: 1.3.6.1.4.1.6141.2.60.18.2.0.1
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
MIB Reference
009-3220-011 Standard Revision A
August 2013
44-1
WWP-LEOS-OAM-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-OAM-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosOamTable
Description and OID
Status
Primary controls and status for the OAM capabilities of an Ethernet like
current
interface. There is one row in this table for each Ethernet like interface in the
system that supports the Ethernet OAM functions defined in [802.3ah].
Access
not-accessible
1.3.6.1.4.1.6141.2.60.400.1.2.1
wwpLeosOamEntry
Description and OID
Status
Access
An entry in the table. Contains an Ethernet like interface in the system that
supports the Ethernet OAM functions defined in [802.3ah].
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.400.1.2.1.1
wwpLeosOamAdminState
Description and OID
This object is used to provision the default administrative OAM mode for this current
interface. This object represents the desired state of OAM for this interface.
The wwpLeosOamAdminState always starts in the disabled(1) state until an
explicit management action or configuration information retained by the
system causes a transition to the enabled(2) state. Note that the value of this
object is ignored when the interface is not operating in full-duplex mode. OAM
is not supported on half-duplex links.
read-write
1.3.6.1.4.1.6141.2.60.400.1.2.1.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
44-2 WWP-LEOS-OAM-MIB
wwpLeosOamOperStatus
Description and OID
Status
Access
At initialization and failure conditions, two OAM entities on the same full-duplex current
Ethernet link begin a discovery phase to determine what OAM capabilities may
be used on that link. The progress of this initialization is controlled by the OAM
sub layer. This value is always disabled(1) if OAM is disabled on this interface
via the wwpLeosOamAdminState. If the link has detected a fault and is
transmitting OAMPDUs with a link fault indication, the value is linkFault(2).
The passiveWait(3) state is returned only by OAM entities in passive mode
(wwpLeosOamMode) and reflects the state in which the OAM entity is waiting
to see if the peer device is OAM capable. The activeSendLocal(4) is used by
active mode devices (wwpLeosOamMode) and reflects the OAM entity actively
trying to discover whether the peer has OAM capability but has not yet made
that determination. The state sendLocalAndRemote(5) indicates that the local
OAM entity has discovered the peer but has not yet accepted or rejected the
configuration of the peer. The local device can, for whatever reason, decide
that the peer device is unacceptable and decline OAM peering. If the local
OAM entity rejects the peer OAM entity, the state becomes
oamPeeringLocallyRejected(7). If the OAM peering is allowed by the local
device, the state moves to sendLocalAndRemoteOk(6). Note that both the
sendLocalAndRemote(5) and oamPeeringLocallyRejected(7) states fall within
the state SEND_LOCAL_REMOTE of the Discovery state diagram [802.3ah,
Figure 57-5], with the difference being whether the local OAM client has
actively rejected the peering or has just not indicated any decision yet.
Whether a peering decision has been made is indicated via the local flags field
in the OAMPDU (reflected in the aOAMLocalFlagsField of 30.3.6.1.10). If the
remote OAM entity rejects the peering, the state becomes
oamPeeringRemotelyRejected(8). Note that both the
sendLocalAndRemoteOk(6) and oamPeeringRemotelyRejected(8) states fall
within the state SEND_LOCAL_REMOTE_OK of the Discovery state diagram
[802.3ah, Figure 57-5], with the difference being whether the remote OAM
client has rejected the peering or has just not yet decided. This is indicated via
the remote flags field in the OAM PDU (reflected in the
aOAMRemoteFlagsField of 30.3.6.1.11). When the local OAM entity learns
that both it and the remote OAM entity have accepted the peering, the state
moves to operational(9) corresponding to the SEND_ANY state of the
Discovery state diagram [802.3ah, Figure 57-5].
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-OAM-MIB 44-3
wwpLeosOamMode
Description and OID
Status
This object configures the mode of OAM operation for this Ethernet like
current
interface. OAM on Ethernet interfaces may be in 'active' mode or 'passive'
mode. These two modes differ in that active mode provides additional
capabilities to initiate monitoring activities with the remote OAM peer entity,
while passive mode generally waits for the peer to initiate OAM actions with it.
As an example, an active OAM entity can put the remote OAM entity in a
loopback state, where a passive OAM entity cannot. The default value of
wwpLeosOamMode is dependent on the type of system on which this Ethernet
like interface resides. The default value should be 'active(1)' unless it is known
that this system should take on a subservient role to the other device
connected over this interface. Changing this value results in incrementing the
configuration revision field of locally generated OAMPDUs (30.3.6.1.12) and
potentially re-doing the OAM discovery process if the
wwpLeosOamOperStatus was already operational(9).
Access
read-write
1.3.6.1.4.1.6141.2.60.400.1.2.1.1.3
wwpLeosMaxOamPduSize
Description and OID
Status
Access
The largest OAMPDU that the OAM entity supports. OAM entities exchange current
maximum OAMPDU sizes and negotiate to use the smaller of the two
maximum OAMPDU sizes between the peers. This value is determined by the
local implementation.
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.1.1.4
wwpLeosOamConfigRevision
Description and OID
Status
Access
The configuration revision of the OAM entity as reflected in the latest OAMPDU current
sent by the OAM entity. The configuration revision is used by OAM entities to
indicate configuration changes have occurred which might require the peer
OAM entity to re-evaluate whether the peering is allowed. See local_satisfied
in [802.3ah, 57.3.1.2].
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.1.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
44-4 WWP-LEOS-OAM-MIB
wwpLeosOamFunctionsSupported
Description and OID
Status
Access
The OAM functions supported on this Ethernet like interface. OAM consists of current
separate functional sets beyond the basic discovery process which is always
required. These functional groups can be supported independently by any
implementation. These values are communicated to the peer via the local
configuration field of Information OAMPDUs.
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.1.1.6
wwpLeosOamPort
Description and OID
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.400.1.2.1.1.7
wwpLeosOamPduTimer
Description and OID
The time in milliseconds between Information OAMPDUs being transmitted via current
the Ethernet port.
read-write
1.3.6.1.4.1.6141.2.60.400.1.2.1.1.8
wwpLeosOamLinkLostTimer
Description and OID
Status
The time in milliseconds to wait for an Information OAMPDU via the Ethernet current
port, from a peer, before declaring the link lost.
Access
read-write
1.3.6.1.4.1.6141.2.60.400.1.2.1.1.9
wwpLeosOamPeerStatusNotifyState
Description and OID
Status
Whether or not a change in peer status, IE whether or not a Link Lost Timer is current
active for the peer, should result in a system event being generated.
Access
read-write
1.3.6.1.4.1.6141.2.60.400.1.2.1.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-OAM-MIB 44-5
wwpLeosOamPeerTable
Description and OID
Status
Information about the OAM peer for a particular Ethernet like interface. OAM current
entities communicate with a single OAM peer entity on full-duplex Ethernet
links on which OAM is enabled and operating properly. In certain states, the
OAM peer information is not available. Whether peer information is available
is communicated via the wwpLeosOamPeerStatus object. When this object is
inactive, all other information in the row is considered invalid.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.400.1.2.2
wwpLeosOamPeerEntry
Description and OID
Status
An entry in the table, containing information on the peer OAM entity for a single current
Ethernet like interface. Note that there is at most one OAM peer for each
Ethernet like interface. There is exactly one row in this table for each Ethernet
like interface supporting OAM.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.400.1.2.2.1
wwpLeosOamPeerStatus
Description and OID
Status
Access
This object indicates whether the information in this row should be considered current
valid. When active(1), the information is valid and represents the current peer
of the OAM entity. When inactive(2), the information in this row is invalid. A
value of inactive(2) is returned if the wwpLeosOamOperStatus is disabled,
passiveWait, or activeSendLocal. For all other values of
wwpLeosOamOperStatus, a value of active(1) is returned.
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.2.1.1
wwpLeosOamPeerMacAddress
Description and OID
Status
Access
The MAC address of the peer OAM entity. The MAC address is derived from current
the most recently received OAMPDU. This value is initialized to all zeros
(0x000000000000). This value is invalid if the wwpLeosOamPeerStatus is
inactive. An OAMPDU is indicated by a valid frame with (1) destination MAC
address equal to that of the reserved MAC address for Slow Protocols (See
43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow
Protocols, (3) and a Slow Protocols subtype equal to that of the subtype
reserved for OAM.
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.2.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
44-6 WWP-LEOS-OAM-MIB
wwpLeosOamPeerVendorOui
Description and OID
Status
Access
The OUI of the OAM peer as reflected in the latest Information OAMPDU
current
received with a Local Information TLV. The OUI can be used to identify the
vendor of the remote OAM entity. This value is initialized to all zeros
(0x000000). This value is considered invalid if the wwpLeosOamPeerStatus is
inactive. An Information OAMPDU is indicated by a valid frame with (1)
destination MAC address equal to that of the reserved MAC address for Slow
Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the
reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of
the subtype reserved for OAM, and (4) an OAM code that equals the code
reserved for Information OAMPDUs.
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.2.1.3
wwpLeosOamPeerVendorInfo
Description and OID
Status
Access
The Vendor Info of the OAM peer as reflected in the latest Information
current
OAMPDU received with a Local Information TLV. The vendor information field
is within the Local Information TLV, and can be used to determine additional
information about the peer entity. The format of the vendor information is
unspecified within the 32-bit field. This value is initialized to all zeros
(0x00000000). This value is invalid if the wwpLeosOamPeerStatus is inactive.
An Information OAMPDU is indicated by a valid frame with (1) destination MAC
address equal to that of the reserved MAC address for Slow Protocols (See
43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow
Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved
for OAM, and (4) an OAM code that equals the code reserved for Information
OAMPDUs.
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.2.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-OAM-MIB 44-7
wwpLeosOamPeerMode
Description and OID
Status
Access
The mode of the OAM peer as reflected in the latest Information OAMPDU
current
received with a Local Information TLV. The mode of the peer can be
determined from the Configuration field in the Local Information TLV of the last
Information OAMPDU received from the peer. This value is initialized to
unknown(3), and is not valid if the wwpLeosOamPeerStatus is inactive. An
Information OAMPDU is indicated by a valid frame with (1) destination MAC
address equal to that of the reserved MAC address for Slow Protocols (See
43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow
Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved
for OAM, and (4) an OAM code that equals the code reserved for Information
OAMPDUs.
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.2.1.5
wwpLeosOamPeerMaxOamPduSize
Description and OID
Status
Access
The maximum size of OAMPDU supported by the peer as reflected in the latest current
Information OAMPDU received with a Local Information TLV. Ethernet OAM
on this interface must not use OAMPDUs that exceed this size. The maximum
OAMPDU size can be determined from the PDU Configuration field of the
Local Information TLV of the last Information OAMPDU received from the peer.
This value is initialized to 64, and is invalid if the wwpLeosOamPeerStatus is
inactive. An Information OAMPDU is indicated by a valid frame with (1)
destination MAC address equal to that of the reserved MAC address for Slow
Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the
reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of
the subtype reserved for OAM, and (4) an OAM code that equals the code
reserved for Information OAMPDUs.
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.2.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
44-8 WWP-LEOS-OAM-MIB
wwpLeosOamPeerConfigRevision
Description and OID
Status
Access
The configuration revision of the OAM peer as reflected in the latest OAMPDU. current
This attribute is changed by the peer whenever it has a local configuration
change for Ethernet OAM this interface. This value is initialized to all zeros
(0x00000000), and is invalid if the wwpLeosOamPeerStatus is inactive. The
configuration revision can be determined from the Revision field of the Local
Information TLV of the most recently received Information OAMPDU with a
Local Information TLV. An Information OAMPDU is indicated by a valid frame
with (1) destination MAC address equal to that of the reserved MAC address
for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the
reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of
the subtype reserved for OAM, and (4) an OAM code that equals the code
reserved for Information OAMPDUs.
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.2.1.7
wwpLeosOamPeerFunctionsSupported
Description and OID
Status
Access
The OAM functions supported on this Ethernet like interface. OAM consists of current
separate functionality sets above the basic discovery process. This value
indicates the capabilities of the peer OAM entity with respect to these
functions. This value is initialized so all bits are clear, and is invalid if the
wwpLeosOamPeerStatus is inactive. The capbilities of the OAM peer can be
determined from the configuration field of the Local Information TLV of the
most recently received Information OAMPDU with a Local Information TLV.
An Information OAMPDU is indicated by a valid frame with (1) destination MAC
address equal to that of the reserved MAC address for Slow Protocols (See
43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow
Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved
for OAM, and (4) an OAM code that equals the code reserved for Information
OAMPDUs.
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.2.1.8
wwpLeosOamLocalPort
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.2.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-OAM-MIB 44-9
wwpLeosOamLoopbackTable
Description and OID
Status
This table contains methods to control the loopback state of the local link as current
well as indicating the status of the loopback function. Loopback can be used
to place the remote OAM entity in a state where every received frame (except
OAMPDUs) are echoed back over the same interface on which they were
received. In this state, at the remote entity, 'normal' traffic is disabled as only
the looped back frames are transmitted on the interface. Loopback is thus an
intrusive operation that prohibits normal data flow and should be used
accordingly.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.400.1.2.3
wwpLeosOamLoopbackEntry
Description and OID
Status
An entry in the table, containing information on the loopback status for a single current
Ethernet like interface. There is an entry in this table for every Ethernet like
interface which supports OAM and loopback function within OAM (as indicated
in wwpLeosOamFunctionsSupported).
Access
not-accessible
1.3.6.1.4.1.6141.2.60.400.1.2.3.1
wwpLeosOamLoopbackCommand
Description and OID
Status
Access
read-write
1.3.6.1.4.1.6141.2.60.400.1.2.3.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
44-10 WWP-LEOS-OAM-MIB
wwpLeosOamLoopbackStatus
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.3.1.2
wwpLeosOamLoopbackIgnoreRx
Description and OID
Status
Since OAM loopback is a disruptive operation (user traffic does not pass), this current
attribute provides a mechanism to provide controls over whether received
OAM loopback commands are processed or ignored. When the value is
ignore(1), received loopback commands are ignored. When the value is
process(2), OAM loopback commands are processed. The default value is to
ignore loopback commands (ignore(1)). The attribute has no meaning if the
local OAM entity does not support the loopback function (as defined in
wwpLeosOamFunctionsSupported).
Access
read-write
1.3.6.1.4.1.6141.2.60.400.1.2.3.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-OAM-MIB 44-11
wwpLeosOamLoopbackPort
Description and OID
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.3.1.4
wwpLeosOamStatsTable
1.3.6.1.4.1.6141.2.60.400.1.2.4
wwpLeosOamStatsEntry
1.3.6.1.4.1.6141.2.60.400.1.2.4.1
wwpLeosOamInformationTx
Description and OID
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
44-12 WWP-LEOS-OAM-MIB
wwpLeosOamInformationRx
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.2
wwpLeosOamUniqueEventNotificationTx
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-OAM-MIB 44-13
wwpLeosOamUniqueEventNotificationRx
Description and OID
Status
Access
A count of the number of unique Event OAMPDUs received on this interface. current
Event notification OAMPDUs may be sent in duplicate to increase the
probability of successfully being received, given the possibility that a frame
may be lost in transit. An Event Notification OAMPDU is indicated by a valid
frame with (1) destination MAC address equal to that of the reserved MAC
address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field
equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype
equal to that of the subtype reserved for OAM, and (4) an OAMPDU code that
equals the OAM Event code. A unique Event Notification OAMPDU is
indicated as an Event Notification OAMPDU with a Sequence Number field
that is distinct from the previously received Event Notification
OAMPDU Sequence Number. Discontinuities of this counter can occur at reinitialization of the management system, and at other times as indicated by the
value of the ifCounterDiscontinuityTime.
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.4
wwpLeosOamLoopbackControlTx
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.5
wwpLeosOamLoopbackControlRx
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.6
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
44-14 WWP-LEOS-OAM-MIB
wwpLeosOamVariableRequestTx
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.7
wwpLeosOamVariableRequestRx
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.8
wwpLeosOamVariableResponseTx
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-OAM-MIB 44-15
wwpLeosOamVariableResponseRx
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.10
wwpLeosOamOrgSpecificTx
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.11
wwpLeosOamOrgSpecificRx
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
44-16 WWP-LEOS-OAM-MIB
wwpLeosOamUnsupportedCodesTx
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.13
wwpLeosOamUnsupportedCodesRx
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.14
wwpLeosOamframesLostDueToOam
Description and OID
Status
Access
A count of the number of frames that were dropped by the OAM multiplexer. current
Since the OAM multiplexer has multiple inputs and a single output, there may
be cases where frames are dropped due to transmit resource contention. This
counter is incremented whenever a frame is dropped by the OAM layer. When
this counter is incremented, no other counters in this MIB are incremented.
Discontinuities of this counter can occur at re-initialization of the management
system, and at other times as indicated by the value of the
ifCounterDiscontinuityTime.
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.15
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-OAM-MIB 44-17
wwpLeosOamStatsPort
Description and OID
Status
Access
current
read-only
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.16
wwpLeosOamDuplicateEventNotificationTx
Description and OID
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.17
wwpLeosOamDuplicateEventNotificationRx
Description and OID
Status
Access
A count of the number of duplicate Event OAMPDUs received on this interface. current
Event notification OAMPDUs may be sent in duplicate to increase the
probability of successfully being received, given the possibility that a frame
may be lost in transit. An Event Notification OAMPDU is indicated by a valid
frame with (1) destination MAC address equal to that of the reserved MAC
address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field
equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype
equal to that of the subtype reserved for OAM, and (4) an OAMPDU code that
equals the OAM Event code. A duplicate Event Notification OAMPDU is
indicated as an Event Notification OAMPDU with a Sequence Number field
that is identical to the previously received Event Notification OAMPDU
Sequence Number. Discontinuities of this counter can occur at re-initialization
of the management system, and at other times as indicated by the value of the
ifCounterDiscontinuityTime.
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.18
MIB Reference
009-3220-011 Standard Revision A
August 2013
44-18 WWP-LEOS-OAM-MIB
wwpLeosOamSystemEnableDisable
Description and OID
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.400.1.2.5
wwpLeosOamEventConfigTable
Description and OID
Ethernet OAM includes the ability to generate and receive event notifications current
to indicate various link problems. This table contains the mechanisms to
configure the thresholds to generate the standard Ethernet OAM Event. These
events are: - Errored Symbol Period Event. Generated when the number of
symbol errors exceeds a threshold within a given window defined by a number
of symbols (e.g. 1,000 symbols out of 1,000,000 had errors). - Errored Frame
Period Event. Generated when the number of frame errors exceeds a
threshold within a given window defined by a number of frames (e.g. 10 frames
out of 1000 had errors). - Errored Frame Event. Generated when the number
of frame errors exceeds a threshold within a given window defined by a period
of time (e.g. 10 frames in 1 second had errors). - Errored Frame Seconds
Summary Event. Generated when the number of errored frame seconds
exceeds a threshold within a given time period (e.g. 10 errored frame seconds
within the last 100 seconds). An errored frame second is defined as a 1
second interval that had >0 frame errors.
not-accessible
1.3.6.1.4.1.6141.2.60.400.1.2.6
wwpLeosOamEventConfigEntry
Description and OID
Status
Access
not-accessible
1.3.6.1.4.1.6141.2.60.400.1.2.6.1
wwpLeosOamEventPort
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.6.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-OAM-MIB 44-19
wwpLeosOamErrFramePeriodWindow
Description and OID
Status
The number of frames over which the threshold is defined. The default value current
of the window is the number of minimum size Ethernet frames that can be
received over the physical layer in one second. If
wwpLeosOamErrFramePeriodThreshold frame errors occur within a window
of wwpLeosOamErrFramePeriodWindow frames, an Event Notification
OAMPDU should be generated with an Errored Frame Period Event TLV
indicating the threshold has been crossed in this window.
Access
read-write
1.3.6.1.4.1.6141.2.60.400.1.2.6.1.2
wwpLeosOamErrFramePeriodThreshold
Description and OID
Status
The number of frame errors that must occur for this event to be triggered. The current
default value is one frame error. If wwpLeosOamErrFramePeriodThreshold
frame errors occur within a window of wwpLeosOamErrFramePeriodWindow
frames, an Event Notification OAMPDU should be generated with an Errored
Frame Period Event TLV indicating the threshold has been crossed in this
window.
Access
read-write
1.3.6.1.4.1.6141.2.60.400.1.2.6.1.3
wwpLeosOamErrFramePeriodEvNotifEnable
Description and OID
Status
Indicates whether the occurrence of an Errored Frame Period Event should current
result in an Event Notification OAMPDU generated by the OAM layer.
By default, this object should have the value enabled(1) for Ethernet like
interfaces that support OAM. If the OAM layer does not support event
notifications (as indicated via the wwpLeosOamFunctionsSupported attribute),
this value is ignored.
Access
read-write
1.3.6.1.4.1.6141.2.60.400.1.2.6.1.4
wwpLeosOamErrFrameWindow
Description and OID
Status
The amount of time (in 100ms increments) over which the threshold is defined. current
The default value is 10 (1 second). If wwpLeosOamErrFrameThreshold frame
errors occur within a window of wwpLeosOamErrFrameWindow seconds
(measured in tenths of seconds), an Event Notification OAMPDU should be
generated with an Errored Frame Event TLV indicating the threshold has been
crossed in this window.
Access
read-write
1.3.6.1.4.1.6141.2.60.400.1.2.6.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
44-20 WWP-LEOS-OAM-MIB
wwpLeosOamErrFrameThreshold
Description and OID
Status
The number of frame errors that must occur for this event to be triggered. The current
default value is one frame error. If wwpLeosOamErrFrameThreshold frame
errors occur within a window of wwpLeosOamErrFrameWindow (in tenths of
seconds), an Event Notification OAMPDU should be generated with an
Errored Frame Event TLV indicating the threshold has been crossed in this
window.
Access
read-write
1.3.6.1.4.1.6141.2.60.400.1.2.6.1.6
wwpLeosOamErrFrameEvNotifEnable
Description and OID
Status
Indicates whether the occurrence of an Errored Frame Event should result in current
an Event Notification OAMPDU generated by the OAM layer. By default, this
object should have the value enabled(1) for Ethernet like interfaces that
support OAM. If the OAM layer does not support event notifications (as
indicated via the wwpLeosOamFunctionsSupported attribute), this value is
ignored.
Access
read-write
1.3.6.1.4.1.6141.2.60.400.1.2.6.1.7
wwpLeosOamErrFrameSecsSummaryWindow
Description and OID
Status
Access
The amount of time (in 100ms intervals) over which the threshold is defined.
The default value is 100 (10 seconds). If
wwpLeosOamErrFrameSecsSummaryThreshold frame errors occur within a
window of wwpLeosOamErrFrameSecsSummaryWindow (in tenths of
seconds), an Event Notification OAMPDU should be generated with an
Errored Frame Seconds Summary Event TLV indicating the threshold has
been crossed in this window.
current
read-write
1.3.6.1.4.1.6141.2.60.400.1.2.6.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-OAM-MIB 44-21
wwpLeosOamErrFrameSecsSummaryThreshold
Description and OID
Status
Access
The number of errored frame seconds that must occur for this event to be
triggered. The default value is one errored frame second. If
wwpLeosOamErrFrameSecsSummaryThreshold frame errors occur within a
window of wwpLeosOamErrFrameSecsSummaryWindow (in tenths of
seconds), an Event Notification OAMPDU should be generated with an
Errored Frame Seconds Summary Event TLV indicating the threshold has
been crossed in this window.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.400.1.2.6.1.9
wwpLeosOamErrFrameSecsEvNotifEnable
Description and OID
read-write
1.3.6.1.4.1.6141.2.60.400.1.2.6.1.10
wwpLeosOamDyingGaspEnable
Description and OID
Status
Indicates whether the local device should attempt to indicate a dying gasp fault current
via the OAMPDU flags field to its peer OAM entity. If the system does not
support dying gasp capability, setting this object has no effect, and reading the
object should always result in 'disabled(2)'. By default, this object should have
the value enabled(1) for Ethernet like interfaces that support OAM. If the OAM
layer does not support event notifications (as indicated via the
OamFunctionsSupported attribute), this value is ignored.
Access
read-write
1.3.6.1.4.1.6141.2.60.400.1.2.6.1.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
44-22 WWP-LEOS-OAM-MIB
wwpLeosOamCriticalEventEnable
Description and OID
Status
Indicates whether the local device should attempt to indicate a critical event current
has occurred via the OAMPDU flags field to its peer OAM entity. If the system
does not support dying gasp capability, setting this object has no effect, and
reading the object should always result in 'disabled(2)'. By default, this object
should have the value enabled(1) for Ethernet like interfaces that support
OAM. If the OAM layer does not support event notifications (as indicated via
the OamFunctionsSupported attribute), this value is ignored.
Access
read-write
1.3.6.1.4.1.6141.2.60.400.1.2.6.1.12
wwpLeosOamEventLogTable
Description and OID
Status
Access
This table records a history of the events that have occurred at the Ethernet
OAM level. These events can include locally detected events, which may
result in locally generated OAMPDUs, and remotely detected events, which
are detected by the OAM peer entity and signaled to the local entity via
Ethernet OAM. Ethernet OAM events can be signaled by Event Notification
OAMPDUs or by the flags field in any OAMPDU.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
An arbitrary integer for identifying individual events within the event log.
current
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.7
wwpLeosOamEventLogEntry
1.3.6.1.4.1.6141.2.60.400.1.2.7.1
wwpLeosOamEventLogPort
1.3.6.1.4.1.6141.2.60.400.1.2.7.1.1
wwpLeosOamEventLogIndex
1.3.6.1.4.1.6141.2.60.400.1.2.7.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-OAM-MIB 44-23
wwpLeosOamEventLogTimestamp
Description and OID
Status
Access
The value of sysUpTime at the time of the logged event. For locally generated current
events, the time of the event can be accurately retrieved from sysUpTime. For
remotely generated events, the time of the event is indicated by the reception
of the Event Notification OAMPDU indicating the event occurred on the peer.
A system may attempt to adjust the timestamp value to more accurately reflect
the time of the event at the peer OAM entity by using other information, such
as that found in the timestamp found of the Event Notification TLVs, which
provides an indication of the relative time between events at the peer entity.
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.7.1.3
wwpLeosOamEventLogOui
Description and OID
Status
Access
The OUI of the entity defining the object type. All IEEE 802.3 defined events current
(as appearing in [802.3ah] except for the Organizationally Unique Event TLVs)
use the IEEE 802.3 OUI of 0x0180C2. Organizations defining their own Event
Notification TLVs include their OUI in the Event Notification TLV which gets
reflected here.
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.7.1.4
wwpLeosOamEventLogType
Description and OID
Status
Access
The type of event that generated this entry in the event log. When the OUI is current
the IEEE 802.3 OUI of 0x0180C2, the following event types are defined:
erroredSymbolEvent(1), erroredFramePeriodEvent (2),
erroredFrameEvent(3), erroredFrameSecondsEvent(4), linkFault(256),
dyingGaspEvent(257), criticalLinkEvent(258) The first four are considered
threshold crossing events as they are generated when a metric exceeds a
given value within a specified window. The other three are not threshold
crossing events. When the OUI is not 0x0180C2, then some other
organization has defined the event space. If event subtyping is known to the
implementation, it may be reflected here. Otherwise, this value should return
all Fs (0xFFFFFFFF).
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.7.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
44-24 WWP-LEOS-OAM-MIB
wwpLeosOamEventLogLocation
Description and OID
Status
Access
Whether this event occurred locally, or was received from the OAM peer via
Ethernet OAM.
current
read-only
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.7.1.6
wwpLeosOamEventLogWindowHi
Description and OID
1.3.6.1.4.1.6141.2.60.400.1.2.7.1.7
wwpLeosOamEventLogWindowLo
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.7.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-OAM-MIB 44-25
wwpLeosOamEventLogThresholdHi
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.7.1.9
wwpLeosOamEventLogThresholdLo
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.7.1.10
wwpLeosOamEventLogValue
Description and OID
Status
Access
If the event represents a threshold crossing event, this value indicates the
current
value of the parameter within the given window that generated this event (e.g.
11, when 11 occurrences happened in 5 seconds while the threshold was 10).
Otherwise, this value is returned as all Fs (0xFFFFFFFFFFFFFFFF) and adds
no useful information.
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.7.1.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
44-26 WWP-LEOS-OAM-MIB
wwpLeosOamEventLogRunningTotal
Description and OID
Status
Access
This value represents the total number of times this occurrence has happened current
since the last reset (e.g. 3253, when 3253 symbol errors have occurred since
the last reset, which has resulted in 51 symbol error threshold crossing events
since the last reset).
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.7.1.12
wwpLeosOamEventLogEventTotal
Description and OID
Status
Access
This value represents the total number of times one or more of these
current
occurrences have resulted in an event (e.g. 51 when 3253 symbol errors have
occurred since the last reset, which has resulted in 51 symbol error threshold
crossing events since the last reset).
read-only
1.3.6.1.4.1.6141.2.60.400.1.2.7.1.13
wwpLeosOamStatsClear
Description and OID
Status
Access
Setting this object to 'true' causes the values of all objects maintained within
the wwpLeosOamStatsTable to reset to the value of zero. When read, this
object always returns the value of false.
current
read-write
1.3.6.1.4.1.6141.2.60.400.1.2.8.1
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
wwpLeosOamLinkEventTrap
A wwpLeosOamLinkEventTrap notification is sent whenever a local or remote
link event is detected and recorded in the wwpLeosOamEventLogTable.
Variable bindings include: wwpLeosOamEventLogPort,
wwpLeosOamEventLogType, wwpLeosOamEventLogLocation.
Object Identifier: 1.3.6.1.4.1.6141.2.60.400.1.3.0.1
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-OAM-MIB 44-27
wwpLeosOamLinkLostTimerActiveTrap
A wwpLeowsOamLinkLostTimerActiveTrap notification is sent whenever a link
lost timer becomes active for a port. Variable bindings include:
wwpLeosOamPort, wwpLeosEtherPortDesc, wwpLeosEtherPortOperStatus,
wwpLeosOamOperStatus, wwpLeosOamPeerStatus,
wwpLeosOamPeerMacAddress.
Object Identifier: 1.3.6.1.4.1.6141.2.60.400.1.3.0.2
Status: current
Supported Platforms: none
wwpLeosOamLinkLostTimerExpiredTrap
A wwpLeowsOamLinkLostTimerActiveTrap notification is sent whenever a link
lost timer expires for a port. wwpLeosOamPort, wwpLeosEtherPortDesc,
wwpLeosEtherPortOperStatus, wwpLeosOamOperStatus,
wwpLeosOamPeerStatus, wwpLeosOamPeerMacAddress.
Object Identifier: 1.3.6.1.4.1.6141.2.60.400.1.3.0.3
Status: current
Supported Platforms: none
MIB Reference
009-3220-011 Standard Revision A
August 2013
44-28 WWP-LEOS-OAM-MIB
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-1
WWP-LEOS-PBT-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-PBT-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosPbtBridgeMac
Description and OID
Status
This represents the provider MAC address to be used as source MAC during current
PBT encapsulation. If this object is not set then it returns default MAC derived
from chassis MAC.
Access
read-write
1.3.6.1.4.1.6141.2.60.38.1.1.1.1
wwpLeosPbtServiceTagEType
Description and OID
Status
Access
This represents the etype value to be used in I-Tag (Service tag) section of
PBT encapsulation. The I-tag ether type cannot be modified in native mode
PBT
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.38.1.1.1.2
wwpLeosPbtTunnelTagEtype
1.3.6.1.4.1.6141.2.60.38.1.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-2 WWP-LEOS-PBT-MIB
wwpLeosPbtTunnelReversionState
Description and OID
Status
Setting this object enables or disables automatic tunnel reversion from backup current
to primary if the primary becomes back up. The device waits for
wwpLeosPbtTunnelReversionHoldTime before automatically switching that
data traffic back to primary.
Access
read-write
1.3.6.1.4.1.6141.2.60.38.1.1.1.4
wwpLeosPbtTunnelReversionHoldTime
Description and OID
Status
Access
This object represents the hold time before data traffic on the backup tunnel
automatically reverts to the primary tunnel.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.38.1.1.1.5
wwpLeosPbtTransitTunnelEtypeRemark
Description and OID
Setting this object enables or disables remarking of the EtherType field in the current
B-Tag (tunnel) portion of PBT frames that are transiting through the device
without PBT encapsulation, or decapsulation. While enabled, applicable PBT
transit frames egressing a PBT port have their B-Tag EtherType marked with
the value configured as the wwpLeosPbtTunnelTagEtype.
read-write
1.3.6.1.4.1.6141.2.60.38.1.1.1.6
wwpLeosPbtAdminMode
Description and OID
Status
This object represents PBT Admin mode. Some platforms support either non- current
native or native mode.
Access
read-write
1.3.6.1.4.1.6141.2.60.38.1.1.1.7
wwpLeosPbtOperMode
Description and OID
Status
This object represents PBT Oper mode. Some platforms support either non- current
native or native mode.
Access
read-write
1.3.6.1.4.1.6141.2.60.38.1.1.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-3
wwpLeosPbtServiceVlanTpid
Description and OID
Status
When operating in native mode, this is the value of the service VLAN TPID that current
is used if retain-stag is set to TRUE. This is configurable only in native mode
PBT. In non-native mode, this value defaults to the 0x8100 and cannot be
changed. Valid values are 8100, 9100 and 88a8
Access
read-write
1.3.6.1.4.1.6141.2.60.38.1.1.1.9
wwpLeosPbtTunnelSwitchOverHoldTime
Description and OID
Status
Access
This object represents the hold time before data traffic on the backup tunnel
automatically switches over to the primary tunnel.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.38.1.1.1.10
wwpLeosPbtBridgeNameMacMapTable
Description and OID
The (conceptual) table listing the host names to MAC mapping table. To create current
entry in this table use SNMP multiple set operation.
wwpLeosPbtBridgeNameMacMapBridgeName must be specified.
wwpLeosPbtBridgeNameMacMapMacAddr must be specified.
wwpLeosPbtBridgeNameMacMapRowStatus must be specified.
not-accessible
1.3.6.1.4.1.6141.2.60.38.1.1.2
wwpLeosPbtBridgeNameMacMapEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.2.1
wwpLeosPbtBridgeNameMacMapIndex
1.3.6.1.4.1.6141.2.60.38.1.1.2.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-4 WWP-LEOS-PBT-MIB
wwpLeosPbtBridgeNameMacMapBridgeName
Description and OID
Status
This represents the host name of the provider edge device. This object cannot current
be modified.
Access
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.2.1.2
wwpLeosPbtBridgeNameMacMapMacAddr
Description and OID
Status
Access
This represents the MAC address of the provider edge device. This object
cannot be modified.
current
read-create
Status
Access
This object specifies the total number of encap tunnels using this entry.
current
read-only
Status
Access
Setting this object to 'createAndGo' creates the entryin the table. Setting this
object to 'destroy' deletes the entry from the table.
current
read-create
Status
Access
The (conceptual) table listing the BVIDs reserved for the provider backbone
bridge tunnels.
current
not-accessible
Status
Access
The entry to reserve BVIDs for the provider backbone bridge tunnels.
current
not-accessible
1.3.6.1.4.1.6141.2.60.38.1.1.2.1.3
wwpLeosPbtBridgeNameMacMapUseCount
1.3.6.1.4.1.6141.2.60.38.1.1.2.1.4
wwpLeosPbtBridgeNameMacMapRowStatus
1.3.6.1.4.1.6141.2.60.38.1.1.2.1.5
wwpLeosPbtReservedBVIDTable
1.3.6.1.4.1.6141.2.60.38.1.1.3
wwpLeosPbtReservedBVIDEntry
1.3.6.1.4.1.6141.2.60.38.1.1.3.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-5
wwpLeosPbtReservedBVID
Description and OID
Status
Access
This object is used to specify the VLAN ID to be reserved for PBT tunnels.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.38.1.1.3.1.1
wwpLeosPbtReservedBVIDRowStatus
Description and OID
current
Setting this object to 'createandgo' reserves the BVID VLAN for provider
backbone bridge tunnels. Setting this object to 'destroy means the BVID VLAN
is no longer reserved for the virtual switch.
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.3.1.2
wwpLeosPbtVirtualCircuitTable
Description and OID
Status
The (conceptual) table listing the virtual circuit MAC in MAC table. To create current
entry use SNMP multiple set operation because the following objects need to
be set when creating an entry in the table. wwpLeosPbtVirtualCircuitName
must be specified.
wwpLeosPbtVirtualCircuitIngressISID must be
specified. wwpLeosPbtVirtualCircuitEgressISID must be specified.
wwpLeosPbtVirtualCircuitRowStatus must be specified.
wwpLeosPbtVirtualCircuitIngressISID and
wwpLeosPbtVirtualCircuitEgressISID must be the same values.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.38.1.1.4
wwpLeosPbtVirtualCircuitEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
This represents the virtual circuit MAC in MAC index in the table. This number current
should be unique in the table.
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.4.1
wwpLeosPbtVirtualCircuitIndex
Description and OID
1.3.6.1.4.1.6141.2.60.38.1.1.4.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-6 WWP-LEOS-PBT-MIB
wwpLeosPbtVirtualCircuitName
Description and OID
Status
Access
current
read-create
Status
Access
This represents the fixed tunnel this virtual circuit should be mapped to.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.38.1.1.4.1.2
wwpLeosPbtVirtualCircuitFixedEncapTunnelId
1.3.6.1.4.1.6141.2.60.38.1.1.4.1.3
wwpLeosPbtVirtualCircuitDestBridgeIndex
Description and OID
This represents the provider destination host name used for this tunnel. This current
must be set to one of the value specified by
wwpLeosPbtBridgeNameMacMapIndex. If set to 0, the device interprets it as
not specified.
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.4.1.4
wwpLeosPbtVirtualCircuitIngressISID
Description and OID
Status
Access
This represents the ingress ISID associated with the virtual circuit.
current
read-create
Status
Access
This represents the egress ISID associated with the virtual circuit.
current
read-create
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.4.1.5
wwpLeosPbtVirtualCircuitEgressISID
1.3.6.1.4.1.6141.2.60.38.1.1.4.1.6
wwpLeosPbtVirtualCircuitOperState
1.3.6.1.4.1.6141.2.60.38.1.1.4.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-7
wwpLeosPbtVirtualCircuitEncapTunnelIdInUse
Description and OID
Status
Access
This represents the tunnel ID of the active tunnel this virtual circuit is currently current
using. This tunnel can be the primary or backup tunnel.
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.4.1.8
wwpLeosPbtVirtualCircuitRowStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, set this object to 'destroy'. If the entry exists, it is displayed as
'active'.
Access
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.4.1.9
wwpLeosPbtVirtualCircuitRetainSTAG
Description and OID
Status
When operating in PBT mode, writing TRUE(1) to this object forces this VC to current
retain the S-Tag. When FALSE(0) is written, the S-Tag is popped on egress
and the tag is pushed on ingress.
Access
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.4.1.10
wwpLeosPbtVirtualCircuitStag
Description and OID
Status
current
When operating in PBT mode, this is the value of the S-Tag that is used if
wwpLeosPbtVirtualCircuitRetainSTAG is set to TRUE. This is configurable
only in native mode PBT. In non-native mode, this value defaults to the RVID
and cannot be changed.
Access
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.4.1.11
wwpLeosPbtVirtualCircuitStatsTable
Description and OID
Status
Access
The (conceptual) table listing the MPLS virtual circuit statistics table.
current
not-accessible
1.3.6.1.4.1.6141.2.60.38.1.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-8 WWP-LEOS-PBT-MIB
wwpLeosPbtVirtualCircuitStatsEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
This represents the total number of higher 32 bits transmitted for given virtual current
circuit.
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.5.1
wwpLeosPbtVirtualCircuitTxBytesHi
Description and OID
1.3.6.1.4.1.6141.2.60.38.1.1.5.1.1
wwpLeosPbtVirtualCircuitTxBytesLo
Description and OID
Status
Access
This represents the total number of lower 32 bits transmitted for given virtual
circuit.
current
read-only
Status
Access
This represents the total number of higher 32 bits received for given mpls
virtual circuit.
current
read-only
Status
Access
This represents the total number of lower 32 bits received for given virtual
circuit.
current
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.5.1.2
wwpLeosPbtVirtualCircuitRxBytesHi
1.3.6.1.4.1.6141.2.60.38.1.1.5.1.3
wwpLeosPbtVirtualCircuitRxBytesLo
1.3.6.1.4.1.6141.2.60.38.1.1.5.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-9
wwpLeosPbtLocalBridgeNameMacMapTable
Description and OID
Status
The (conceptual) table listing the host names to MAC mapping table. To create current
entry in this table use SNMP multiple set operation.
wwpLeosPbtHostNameMacMapHostName must be specified.
wwpLeosPbtHostNameMacMapMacAddr must be specified.
wwpLeosPbtHostNameMacMapRowStatus must be specified.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.38.1.1.6
wwpLeosPbtLocalBridgeNameMacMapEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.38.1.1.6.1
wwpLeosPbtLocalBridgeNameMacMapIndex
1.3.6.1.4.1.6141.2.60.38.1.1.6.1.1
wwpLeosPbtLocalBridgeNameMacMapBridgeName
Description and OID
This represents the host name of the provider edge device. This object cannot current
be modified.
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.6.1.2
wwpLeosPbtLocalBridgeNameMacMapMacAddr
Description and OID
Status
Access
This represents the MAC address of the provider edge device. This object
cannot be modified.
current
read-only
Status
Access
This object specifies the total number of encap tunnels using this entry.
current
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.6.1.3
wwpLeosPbtLocalBridgeNameMacMapUseCount
1.3.6.1.4.1.6141.2.60.38.1.1.6.1.4
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-10 WWP-LEOS-PBT-MIB
wwpLeosPbtLocalBridgeNameMacMapRowStatus
Description and OID
Status
Setting this object to 'createAndGo' creates the entryin the table. Setting this current
object to 'destroy' deletes the entry from the table.
Access
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.6.1.5
wwpLeosTcePbtServiceTable
Description and OID
Status
current
The (conceptual) table listing the PBT Service table. To create entry in this
table use SNMP multiple set operation. wwpLeosTcePbtServiceName must be
specified. wwpLeosTcePbtServiceIngressIsId must be specified.
wwpLeosTcePbtServiceEgressIsId must be specified.
wwpLeosTcePbtServiceRowStatus must be specified.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.38.1.1.10.1
wwpLeosTcePbtServiceEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This represents the PBT service name. This object cannot be modified.
current
read-create
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1
wwpLeosTcePbtServiceIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.1
wwpLeosTcePbtServiceName
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.2
wwpLeosTcePbtServiceOperStatus
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-11
wwpLeosTcePbtServiceFloodContProfileId
Description and OID
Status
Access
current
read-create
Status
Access
current
read-only
Status
Access
Virtual switch index to which the PBT service is attached. To detach PBT
service from the virtual switch, set this object to 0.
current
read-create
Status
Access
current
read-only
Status
Access
current
read-create
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.4
wwpLeosTcePbtServiceFloodContProfileName
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.5
wwpLeosTcePbtServiceVsIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.6
wwpLeosTcePbtServiceVsName
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.7
wwpLeosTcePbtServiceTnlGroupIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.8
wwpLeosTcePbtServiceTnlGroupName
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-12 WWP-LEOS-PBT-MIB
wwpLeosTcePbtServiceIngressIsId
Description and OID
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.10
wwpLeosTcePbtServiceEgressIsId
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.11
wwpLeosTcePbtServiceFixedEgressPcp
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.12
wwpLeosTcePbtServiceFrameCosPolicy
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.13
wwpLeosTcePbtServiceFrameCosMapIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.14
wwpLeosTcePbtServiceFrameCosMapName
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.15
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-13
wwpLeosTcePbtServiceResolvedCosPolicy
Description and OID
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-only
Status
Access
current
read-create
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.16
wwpLeosTcePbtServiceResolvedCosProfileIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.17
wwpLeosTcePbtServiceResolvedCosProfileName
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.18
wwpLeosTcePbtServiceIngressMeterProfileId
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.19
wwpLeosTcePbtServiceIngressMeterProfileName
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.20
wwpLeosTcePbtServiceIngressMeterPolicy
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.21
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-14 WWP-LEOS-PBT-MIB
wwpLeosTcePbtServiceRowStatus
Description and OID
Status
Access
Setting this object to 'createAndGo' creates the entryin the table. Setting this
object to 'destroy' deletes the entry from the table.
current
read-create
Status
Access
The (conceptual) table listing the PBT tunnel group table. To create entry in
this table use SNMP multiple set operation. wwpLeosTcePbtTnlGroupName
must be specified. wwpLeosTcePbtTnlGroupRowStatus must be specified.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
accessible-fornotify
Status
Access
This represents the tunnel group name. This object cannot be modified.
current
read-create
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.64
wwpLeosTcePbtTnlGroupTable
1.3.6.1.4.1.6141.2.60.38.1.1.10.5
wwpLeosTcePbtTnlGroupEntry
1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1
wwpLeosTcePbtTnlGroupIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.1
wwpLeosTcePbtTnlGroupName
1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.2
wwpLeosTcePbtTnlGroupSyncEnabled
1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-15
wwpLeosTcePbtTnlGroupOperStatus
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
An active PBT tunnel pair is two bidirectional tunnels, one inbound and the
other outbound, between the same pair of devices paired together to represent
a bidirectional PBT trunk. An inbound and an outbound tunnel must map to
the same physical port of the device to qualify for the pairing.
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.4
wwpLeosTcePbtTnlGroupUseCount
1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.5
wwpLeosTcePbtTnlGroupActivePair
Description and OID
1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.6
wwpLeosTcePbtTnlGroupReverting
Description and OID
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.7
wwpLeosTcePbtTnlGroupRowStatus
Description and OID
Setting this object to 'createAndGo' creates the entry in the table. Setting this current
object to 'destroy' deletes the entry from the table.
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.64
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-16 WWP-LEOS-PBT-MIB
wwpLeosTcePbtEncapTnlTable
Description and OID
Status
The (conceptual) table listing the PBT encap tunnels. To create entry in this current
table use SNMP multiple set operation. wwpLeosTcePbtEncapTnlName must
be specified. wwpLeosTcePbtEncapTnlRemoteBridgeIndex must be
specified. wwpLeosTcePbtEncapTnlBvId must be specified.
wwpLeosTcePbtEncapTnlPgId must be specified.
wwpLeosTcePbtEncapTnlRowStatus must be specified.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.38.1.1.10.6
wwpLeosTcePbtEncapTnlEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
accessible-fornotify
Status
Access
This represents the encap tunnel name. This object cannot be modified.
current
read-create
Status
Access
This object represents the PBT encap tunnel remote bridge index.
current
read-create
Status
Access
This object represents the PBT encap tunnel remote bridge name.
current
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1
wwpLeosTcePbtEncapTnlIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.1
wwpLeosTcePbtEncapTnlName
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.2
wwpLeosTcePbtEncapTnlRemoteBridgeIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.3
wwpLeosTcePbtEncapTnlRemoteBridgeName
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-17
wwpLeosTcePbtEncapTnlGroupIndex
Description and OID
Status
Access
current
read-create
Status
Access
current
read-only
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-only
Status
Access
Each Bit Represents a fault. Value 0 represents no fault. First LSB represents current
port Fault. Second LSB represents CFM fault and third LSB represent Admin
Fault.
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.5
wwpLeosTcePbtEncapTnlGroupName
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.6
wwpLeosTcePbtEncapTnlBvId
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.7
wwpLeosTcePbtEncapTnlPgId
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.8
wwpLeosTcePbtEncapTnlPortName
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.9
wwpLeosTcePbtEncapTnlFaults
Description and OID
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-18 WWP-LEOS-PBT-MIB
wwpLeosTcePbtEncapTnlAdminState
Description and OID
Status
Access
current
read-create
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-create
Status
Access
This object represents the PBT encap tunnel paired operational state.
current
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.11
wwpLeosTcePbtEncapTnlOperState
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.12
wwpLeosTcePbtEncapTnlFwdState
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.13
wwpLeosTcePbtEncapTnlPaired
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.14
wwpLeosTcePbtEncapTnlPairIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.15
wwpLeosTcePbtEncapTnlPairOperState
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.16
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-19
wwpLeosTcePbtEncapTnlFrameCosPolicy
Description and OID
Status
Access
This object represents the PBT encap tunnel frame CoS policy.
current
read-create
Status
Access
This object represents the PBT encap tunnel CoS map index.
current
read-create
Status
Access
This object represents the PBT encap tunnel frame CoS map name.
current
read-only
Status
Access
current
read-create
Status
Access
This object indicates whether the PBT encap tunnel has CFM configured.
current
read-only
Status
Access
This object represents the PBT encap tunnel paired decap index.
current
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.17
wwpLeosTcePbtEncapTnlFrameCosMapIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.18
wwpLeosTcePbtEncapTnlFrameCosMapName
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.19
wwpLeosTcePbtEncapTnlFixedPcp
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.20
wwpLeosTcePbtEncapTnlCfmConfigured
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.21
wwpLeosTcePbtEncapTnlPairedDecapIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.22
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-20 WWP-LEOS-PBT-MIB
wwpLeosTcePbtEncapTnlPairedDecapName
Description and OID
Status
Access
This object represents the PBT encap tunnel paired decap name.
current
read-only
Status
Access
current
read-create
Status
Access
This object indicates whether the PBT encap tunnel has statistics enabled.
current
read-only
Status
Access
current
read-create
Status
Access
This object represents the PBT encap tunnel local bridge name.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.23
wwpLeosTcePbtEncapTnlWeight
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.24
wwpLeosTcePbtEncapTnlStatsEnabled
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.25
wwpLeosTcePbtEncapTnlLocalBridgeIndex
Description and OID
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.26
wwpLeosTcePbtEncapTnlLocalBridgeName
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.27
wwpLeosTcePbtEncapTnlReversionToPairIndex
Description and OID
Reversion occurs to this tunnel pair index in a tunnel group and is used in the current
definition of trap..
accessible-fornotify
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.28
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-21
wwpLeosTcePbtEncapTnlReversionFromPairIndex
Description and OID
Status
Access
Reversion occurs from this tunnel pair index in a tunnel group and is used in
the definition of trap.
current
accessible-fornotify
Status
Access
Setting this object to 'createAndGo' creates the entryin the table. Setting this
object to 'destroy' deletes the entry from the table.
current
read-create
Status
Access
The (conceptual) table listing the PBT decap tunnels. To create entry in this
table use the SNMP multiple set operation. wwpLeosTcePbtDecapTnlName
must be specified. wwpLeosTcePbtDecapTnlBvId must be specified.
wwpLeosTcePbtDecapTnlPgId must be specified.
wwpLeosTcePbtDecapTnlRowStatus must be specified.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This represents the decap tunnel name. This object cannot be modified.
current
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.29
wwpLeosTcePbtEncapTnlRowStatus
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.64
wwpLeosTcePbtDecapTnlTable
1.3.6.1.4.1.6141.2.60.38.1.1.10.7
wwpLeosTcePbtDecapTnlEntry
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1
wwpLeosTcePbtDecapTnlIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.1
wwpLeosTcePbtDecapTnlName
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-22 WWP-LEOS-PBT-MIB
wwpLeosTcePbtDecapTnlRemoteBridgeIndex
Description and OID
Status
Access
This object represents the PBT decap tunnel remote bridge index.
current
read-create
Status
Access
This object represents the PBT decap tunnel remote bridge name.
current
read-only
Status
Access
current
read-create
Status
Access
current
read-only
Status
Access
This object represents the PBT decap tunnel BVID. This object cannot be
modified after create.
current
read-create
Status
Access
This object represents the PBT decap tunnel port. This okbect cannot be
modified after create.
current
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.3
wwpLeosTcePbtDecapTnlRemoteBridgeName
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.4
wwpLeosTcePbtDecapTnlGroupIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.5
wwpLeosTcePbtDecapTnlGroupName
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.6
wwpLeosTcePbtDecapTnlBvId
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.7
wwpLeosTcePbtDecapTnlPgId
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-23
wwpLeosTcePbtDecapTnlPortName
Description and OID
Status
Access
current
read-only
Status
Access
Each Bit Represents a fault. Value 0 represents no fault. First LSB represents current
port Fault. Second LSB represents CFM fault and value 3 represents port and
CFM fault.
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.9
wwpLeosTcePbtDecapTnlFaults
Description and OID
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.10
wwpLeosTcePbtDecapTnlOperState
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.11
wwpLeosTcePbtDecapTnlFwdState
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.12
wwpLeosTcePbtDecapTnlPaired
Description and OID
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.13
wwpLeosTcePbtDecapTnlPairIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.14
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-24 WWP-LEOS-PBT-MIB
wwpLeosTcePbtDecapTnlPairOperState
Description and OID
Status
Access
This object represents the PBT decap tunnel pair operational state.
current
read-only
Status
Access
This object represents the PBT decap tunnel resolved CoS policy.
current
read-create
Status
Access
This object represents the PBT decap tunnel resolved CoS map index.
current
read-create
Status
Access
This object represents the PBT decap tunnel resolved CoS map name.
current
read-only
Status
Access
This object indicates whether the PBT decap tunnel has CFM configured.
current
read-only
Status
Access
This object represents the PBT decap tunnel paired encap tunnel index.
current
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.15
wwpLeosTcePbtDecapTnlResolvedCosPolicy
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.16
wwpLeosTcePbtDecapTnlResolvedCosMapIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.17
wwpLeosTcePbtDecapTnlResolvedCosMapName
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.18
wwpLeosTcePbtDecapTnlCfmConfigured
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.19
wwpLeosTcePbtDecapTnlPairedEncapIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.20
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-25
wwpLeosTcePbtDecapTnlPairedEncapName
Description and OID
Status
Access
This object represents the PBT decap tunnel paired encap tunnel name.
current
read-only
Status
Access
This object indicates whether the PBT decap tunnel has statistics enabled.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.21
wwpLeosTcePbtDecapTnlStatsEnabled
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.22
wwpLeosTcePbtDecapTnlRowStatus
Description and OID
Setting this object to 'createAndGo' creates the entry in the table. Setting this current
object to 'destroy' deletes the entry from the table.
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.64
wwpLeosTcePbtServiceUserFrameL2TransformTable
Description and OID
Status
current
PBT service user frame L2 Transform table. Two entries in this table are
automatically
created when a PBT service is created (one for ingress and
one for egress).
The entries are deleted from this table when the
corresponding pbt service is deleted.
Therefore, there is no rowStatus field
in this table entry.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.38.1.1.10.8
wwpLeosTcePbtServiceUserFrameL2TransformEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1
wwpLeosTcePbtServiceUserFrameL2TransformDirection
1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-26 WWP-LEOS-PBT-MIB
wwpLeosTcePbtServiceUserFrameL2TransformTagIndex
Description and OID
Status
This object specifies pbt service user frame L2 Transform direction entry index. current
Initial deployment supports a single tag transform. As such, tag index 2 always
has the tag action of none(1).
Access
not-accessible
1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.2
wwpLeosTcePbtServiceUserFrameL2TransformTagAction
Description and OID
Status
This object specifies pbt service L2 Transform Action Type. Initial deployment current
supports egress/encap actions including none(1) and push(2). Initial
deployment supports ingress/decap actions including none(1) and pop(3).
Access
read-write
1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.3
wwpLeosTcePbtServiceUserFrameL2TransformTagValue
Description and OID
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.4
wwpLeosTcePbtServiceUserFrameL2TransformTagEtype
Description and OID
This object specifies the L2 transform Etype. The Etype must be specified for current
a push action. The Etype MAY be specified for a stamp action.
read-write
1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.5
wwpLeosTcePbtServiceUserFrameL2TransformTagPriority
Description and OID
Status
This object specifies the L2 transform tag static or fixed priority. Use of this current
value depends on the L2 transform action, e.g., push or stamp, as well as the
priority policy.
Access
read-write
1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.6
wwpLeosTcePbtServiceUserFrameL2TransformPriPolicy
Description and OID
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.7
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-27
wwpLeosTcePbtServiceUserFrameL2TransformUseTagValue
Description and OID
Status
Access
This object specifies whether the tag value is used when stamping. If the
action is to push, the tag value is always used.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.8
wwpLeosTcePbtServiceUserFrameL2TransformUseTagEtype
Description and OID
This object specifies whether to use the tag Ethertype when stamping. If the current
action is to push, the tag Ethertype is always used.
read-write
1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.9
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
wwpLeosPbtTunnelFaultNotification
This notification is sent every time the tunnel becomes operationally down.
Variable bindings include: wwpLeosVplsEncapTunnelId
Object Identifier: 1.3.6.1.4.1.6141.2.60.38.2.0.1
Status: deprecated
Supported Platforms: none
wwpLeosPbtTunnelReversionNotification
This notification is sent every time backup tunnel reverts back to primary
tunnel, once primary tunnel comes up. Variable binding
wwpLeosVplsEncapTunnelId represents the primary tunnel ID.
Object Identifier: 1.3.6.1.4.1.6141.2.60.38.2.0.2
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPbtTunnelActivateNotification
This notification is sent every time tunnel is activated. Variable binding
wwpLeosVplsEncapTunnelId represents the tunnel ID.
Object Identifier: 1.3.6.1.4.1.6141.2.60.38.2.0.3
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-28 WWP-LEOS-PBT-MIB
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPbtTunnelDeactivateNotification
This notification is sent every time tunnel is de-activated. Variable binding
wwpLeosVplsEncapTunnelId represents the tunnel ID.
Object Identifier: 1.3.6.1.4.1.6141.2.60.38.2.0.4
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosTcePbtTunnelActivateNotification
This notification is sent everytime tunnel of the given tunnel group is activated.
Object Identifier: 1.3.6.1.4.1.6141.2.60.38.2.0.10
Status: current
Supported Platforms:
wwpLeosTcePbtTunnelDeactivateNotification
This notification is sent everytime tunnel of the given tunnel group is
deactivated. Variable bindings include: wwpLeosTcePbtEncapTnlIndex,
wwpLeosTcePbtEncapTnlName, wwpLeosTcePbtTnlGroupIndex,
wwpLeosTcePbtTnlGroupName, and wwpLeosTcePbtEncapTnlFwdState.
Object Identifier: 1.3.6.1.4.1.6141.2.60.38.2.0.11
Status: current
Supported Platforms: none
wwpLeosTcePbtTunnelReversionNotification
Upon the failure of the primary tunnel, traffic is moved over to the backup
tunnel at the tunnel ingress. Tunnel reversion signifies the restoration of traffic
from this backup tunnel (now active) to the primary (now standby) after the
primary tunnel is restored. This notification is generated when this reversion
occurs. Variable bindings include: wwpLeosTcePbtTnlGroupIndex,
wwpLeosTcePbtTnlGroupName,
wwpLeosTcePbtEncapTnlReversionToPairIndex, and
wwpLeosTcePbtEncapTnlReversionFromPairIndex.
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-29
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-30 WWP-LEOS-PBT-MIB
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-2 WWP-LEOS-PBT-MIB
wwpLeosPbtTunnelReversionState
Description and OID
Status
Setting this object enables or disables automatic tunnel reversion from backup current
to primary if the primary becomes back up. The device waits for
wwpLeosPbtTunnelReversionHoldTime before automatically switching that
data traffic back to primary.
Access
read-write
1.3.6.1.4.1.6141.2.60.38.1.1.1.4
wwpLeosPbtTunnelReversionHoldTime
Description and OID
Status
Access
This object represents the hold time before data traffic on the backup tunnel
automatically reverts to the primary tunnel.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.38.1.1.1.5
wwpLeosPbtTransitTunnelEtypeRemark
Description and OID
Setting this object enables or disables remarking of the EtherType field in the current
B-Tag (tunnel) portion of PBT frames that are transiting through the device
without PBT encapsulation, or decapsulation. While enabled, applicable PBT
transit frames egressing a PBT port have their B-Tag EtherType marked with
the value configured as the wwpLeosPbtTunnelTagEtype.
read-write
1.3.6.1.4.1.6141.2.60.38.1.1.1.6
wwpLeosPbtAdminMode
Description and OID
Status
This object represents PBT Admin mode. Some platforms support either non- current
native or native mode.
Access
read-write
1.3.6.1.4.1.6141.2.60.38.1.1.1.7
wwpLeosPbtOperMode
Description and OID
Status
This object represents PBT Oper mode. Some platforms support either non- current
native or native mode.
Access
read-write
1.3.6.1.4.1.6141.2.60.38.1.1.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-3
wwpLeosPbtServiceVlanTpid
Description and OID
Status
When operating in native mode, this is the value of the service VLAN TPID that current
is used if retain-stag is set to TRUE. This is configurable only in native mode
PBT. In non-native mode, this value defaults to the 0x8100 and cannot be
changed. Valid values are 8100, 9100 and 88a8
Access
read-write
1.3.6.1.4.1.6141.2.60.38.1.1.1.9
wwpLeosPbtTunnelSwitchOverHoldTime
Description and OID
Status
Access
This object represents the hold time before data traffic on the backup tunnel
automatically switches over to the primary tunnel.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.38.1.1.1.10
wwpLeosPbtBridgeNameMacMapTable
Description and OID
The (conceptual) table listing the host names to MAC mapping table. To create current
entry in this table use SNMP multiple set operation.
wwpLeosPbtBridgeNameMacMapBridgeName must be specified.
wwpLeosPbtBridgeNameMacMapMacAddr must be specified.
wwpLeosPbtBridgeNameMacMapRowStatus must be specified.
not-accessible
1.3.6.1.4.1.6141.2.60.38.1.1.2
wwpLeosPbtBridgeNameMacMapEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.2.1
wwpLeosPbtBridgeNameMacMapIndex
1.3.6.1.4.1.6141.2.60.38.1.1.2.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-4 WWP-LEOS-PBT-MIB
wwpLeosPbtBridgeNameMacMapBridgeName
Description and OID
Status
This represents the host name of the provider edge device. This object cannot current
be modified.
Access
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.2.1.2
wwpLeosPbtBridgeNameMacMapMacAddr
Description and OID
Status
Access
This represents the MAC address of the provider edge device. This object
cannot be modified.
current
read-create
Status
Access
This object specifies the total number of encap tunnels using this entry.
current
read-only
Status
Access
Setting this object to 'createAndGo' creates the entryin the table. Setting this
object to 'destroy' deletes the entry from the table.
current
read-create
Status
Access
The (conceptual) table listing the BVIDs reserved for the provider backbone
bridge tunnels.
current
not-accessible
Status
Access
The entry to reserve BVIDs for the provider backbone bridge tunnels.
current
not-accessible
1.3.6.1.4.1.6141.2.60.38.1.1.2.1.3
wwpLeosPbtBridgeNameMacMapUseCount
1.3.6.1.4.1.6141.2.60.38.1.1.2.1.4
wwpLeosPbtBridgeNameMacMapRowStatus
1.3.6.1.4.1.6141.2.60.38.1.1.2.1.5
wwpLeosPbtReservedBVIDTable
1.3.6.1.4.1.6141.2.60.38.1.1.3
wwpLeosPbtReservedBVIDEntry
1.3.6.1.4.1.6141.2.60.38.1.1.3.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-5
wwpLeosPbtReservedBVID
Description and OID
Status
Access
This object is used to specify the VLAN ID to be reserved for PBT tunnels.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.38.1.1.3.1.1
wwpLeosPbtReservedBVIDRowStatus
Description and OID
current
Setting this object to 'createandgo' reserves the BVID VLAN for provider
backbone bridge tunnels. Setting this object to 'destroy means the BVID VLAN
is no longer reserved for the virtual switch.
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.3.1.2
wwpLeosPbtVirtualCircuitTable
Description and OID
Status
The (conceptual) table listing the virtual circuit MAC in MAC table. To create current
entry use SNMP multiple set operation because the following objects need to
be set when creating an entry in the table. wwpLeosPbtVirtualCircuitName
must be specified.
wwpLeosPbtVirtualCircuitIngressISID must be
specified. wwpLeosPbtVirtualCircuitEgressISID must be specified.
wwpLeosPbtVirtualCircuitRowStatus must be specified.
wwpLeosPbtVirtualCircuitIngressISID and
wwpLeosPbtVirtualCircuitEgressISID must be the same values.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.38.1.1.4
wwpLeosPbtVirtualCircuitEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
This represents the virtual circuit MAC in MAC index in the table. This number current
should be unique in the table.
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.4.1
wwpLeosPbtVirtualCircuitIndex
Description and OID
1.3.6.1.4.1.6141.2.60.38.1.1.4.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-6 WWP-LEOS-PBT-MIB
wwpLeosPbtVirtualCircuitName
Description and OID
Status
Access
current
read-create
Status
Access
This represents the fixed tunnel this virtual circuit should be mapped to.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.38.1.1.4.1.2
wwpLeosPbtVirtualCircuitFixedEncapTunnelId
1.3.6.1.4.1.6141.2.60.38.1.1.4.1.3
wwpLeosPbtVirtualCircuitDestBridgeIndex
Description and OID
This represents the provider destination host name used for this tunnel. This current
must be set to one of the value specified by
wwpLeosPbtBridgeNameMacMapIndex. If set to 0, the device interprets it as
not specified.
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.4.1.4
wwpLeosPbtVirtualCircuitIngressISID
Description and OID
Status
Access
This represents the ingress ISID associated with the virtual circuit.
current
read-create
Status
Access
This represents the egress ISID associated with the virtual circuit.
current
read-create
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.4.1.5
wwpLeosPbtVirtualCircuitEgressISID
1.3.6.1.4.1.6141.2.60.38.1.1.4.1.6
wwpLeosPbtVirtualCircuitOperState
1.3.6.1.4.1.6141.2.60.38.1.1.4.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-7
wwpLeosPbtVirtualCircuitEncapTunnelIdInUse
Description and OID
Status
Access
This represents the tunnel ID of the active tunnel this virtual circuit is currently current
using. This tunnel can be the primary or backup tunnel.
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.4.1.8
wwpLeosPbtVirtualCircuitRowStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, set this object to 'destroy'. If the entry exists, it is displayed as
'active'.
Access
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.4.1.9
wwpLeosPbtVirtualCircuitRetainSTAG
Description and OID
Status
When operating in PBT mode, writing TRUE(1) to this object forces this VC to current
retain the S-Tag. When FALSE(0) is written, the S-Tag is popped on egress
and the tag is pushed on ingress.
Access
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.4.1.10
wwpLeosPbtVirtualCircuitStag
Description and OID
Status
current
When operating in PBT mode, this is the value of the S-Tag that is used if
wwpLeosPbtVirtualCircuitRetainSTAG is set to TRUE. This is configurable
only in native mode PBT. In non-native mode, this value defaults to the RVID
and cannot be changed.
Access
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.4.1.11
wwpLeosPbtVirtualCircuitStatsTable
Description and OID
Status
Access
The (conceptual) table listing the MPLS virtual circuit statistics table.
current
not-accessible
1.3.6.1.4.1.6141.2.60.38.1.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-8 WWP-LEOS-PBT-MIB
wwpLeosPbtVirtualCircuitStatsEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
This represents the total number of higher 32 bits transmitted for given virtual current
circuit.
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.5.1
wwpLeosPbtVirtualCircuitTxBytesHi
Description and OID
1.3.6.1.4.1.6141.2.60.38.1.1.5.1.1
wwpLeosPbtVirtualCircuitTxBytesLo
Description and OID
Status
Access
This represents the total number of lower 32 bits transmitted for given virtual
circuit.
current
read-only
Status
Access
This represents the total number of higher 32 bits received for given mpls
virtual circuit.
current
read-only
Status
Access
This represents the total number of lower 32 bits received for given virtual
circuit.
current
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.5.1.2
wwpLeosPbtVirtualCircuitRxBytesHi
1.3.6.1.4.1.6141.2.60.38.1.1.5.1.3
wwpLeosPbtVirtualCircuitRxBytesLo
1.3.6.1.4.1.6141.2.60.38.1.1.5.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-9
wwpLeosPbtLocalBridgeNameMacMapTable
Description and OID
Status
The (conceptual) table listing the host names to MAC mapping table. To create current
entry in this table use SNMP multiple set operation.
wwpLeosPbtHostNameMacMapHostName must be specified.
wwpLeosPbtHostNameMacMapMacAddr must be specified.
wwpLeosPbtHostNameMacMapRowStatus must be specified.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.38.1.1.6
wwpLeosPbtLocalBridgeNameMacMapEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.38.1.1.6.1
wwpLeosPbtLocalBridgeNameMacMapIndex
1.3.6.1.4.1.6141.2.60.38.1.1.6.1.1
wwpLeosPbtLocalBridgeNameMacMapBridgeName
Description and OID
This represents the host name of the provider edge device. This object cannot current
be modified.
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.6.1.2
wwpLeosPbtLocalBridgeNameMacMapMacAddr
Description and OID
Status
Access
This represents the MAC address of the provider edge device. This object
cannot be modified.
current
read-only
Status
Access
This object specifies the total number of encap tunnels using this entry.
current
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.6.1.3
wwpLeosPbtLocalBridgeNameMacMapUseCount
1.3.6.1.4.1.6141.2.60.38.1.1.6.1.4
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-10 WWP-LEOS-PBT-MIB
wwpLeosPbtLocalBridgeNameMacMapRowStatus
Description and OID
Status
Setting this object to 'createAndGo' creates the entryin the table. Setting this current
object to 'destroy' deletes the entry from the table.
Access
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.6.1.5
wwpLeosTcePbtServiceTable
Description and OID
Status
current
The (conceptual) table listing the PBT Service table. To create entry in this
table use SNMP multiple set operation. wwpLeosTcePbtServiceName must be
specified. wwpLeosTcePbtServiceIngressIsId must be specified.
wwpLeosTcePbtServiceEgressIsId must be specified.
wwpLeosTcePbtServiceRowStatus must be specified.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.38.1.1.10.1
wwpLeosTcePbtServiceEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This represents the PBT service name. This object cannot be modified.
current
read-create
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1
wwpLeosTcePbtServiceIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.1
wwpLeosTcePbtServiceName
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.2
wwpLeosTcePbtServiceOperStatus
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-11
wwpLeosTcePbtServiceFloodContProfileId
Description and OID
Status
Access
current
read-create
Status
Access
current
read-only
Status
Access
Virtual switch index to which the PBT service is attached. To detach PBT
service from the virtual switch, set this object to 0.
current
read-create
Status
Access
current
read-only
Status
Access
current
read-create
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.4
wwpLeosTcePbtServiceFloodContProfileName
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.5
wwpLeosTcePbtServiceVsIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.6
wwpLeosTcePbtServiceVsName
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.7
wwpLeosTcePbtServiceTnlGroupIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.8
wwpLeosTcePbtServiceTnlGroupName
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-12 WWP-LEOS-PBT-MIB
wwpLeosTcePbtServiceIngressIsId
Description and OID
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.10
wwpLeosTcePbtServiceEgressIsId
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.11
wwpLeosTcePbtServiceFixedEgressPcp
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.12
wwpLeosTcePbtServiceFrameCosPolicy
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.13
wwpLeosTcePbtServiceFrameCosMapIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.14
wwpLeosTcePbtServiceFrameCosMapName
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.15
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-13
wwpLeosTcePbtServiceResolvedCosPolicy
Description and OID
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-only
Status
Access
current
read-create
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.16
wwpLeosTcePbtServiceResolvedCosProfileIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.17
wwpLeosTcePbtServiceResolvedCosProfileName
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.18
wwpLeosTcePbtServiceIngressMeterProfileId
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.19
wwpLeosTcePbtServiceIngressMeterProfileName
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.20
wwpLeosTcePbtServiceIngressMeterPolicy
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.21
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-14 WWP-LEOS-PBT-MIB
wwpLeosTcePbtServiceRowStatus
Description and OID
Status
Access
Setting this object to 'createAndGo' creates the entryin the table. Setting this
object to 'destroy' deletes the entry from the table.
current
read-create
Status
Access
The (conceptual) table listing the PBT tunnel group table. To create entry in
this table use SNMP multiple set operation. wwpLeosTcePbtTnlGroupName
must be specified. wwpLeosTcePbtTnlGroupRowStatus must be specified.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
accessible-fornotify
Status
Access
This represents the tunnel group name. This object cannot be modified.
current
read-create
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.64
wwpLeosTcePbtTnlGroupTable
1.3.6.1.4.1.6141.2.60.38.1.1.10.5
wwpLeosTcePbtTnlGroupEntry
1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1
wwpLeosTcePbtTnlGroupIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.1
wwpLeosTcePbtTnlGroupName
1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.2
wwpLeosTcePbtTnlGroupSyncEnabled
1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-15
wwpLeosTcePbtTnlGroupOperStatus
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
An active PBT tunnel pair is two bidirectional tunnels, one inbound and the
other outbound, between the same pair of devices paired together to represent
a bidirectional PBT trunk. An inbound and an outbound tunnel must map to
the same physical port of the device to qualify for the pairing.
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.4
wwpLeosTcePbtTnlGroupUseCount
1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.5
wwpLeosTcePbtTnlGroupActivePair
Description and OID
1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.6
wwpLeosTcePbtTnlGroupReverting
Description and OID
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.7
wwpLeosTcePbtTnlGroupRowStatus
Description and OID
Setting this object to 'createAndGo' creates the entry in the table. Setting this current
object to 'destroy' deletes the entry from the table.
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.64
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-16 WWP-LEOS-PBT-MIB
wwpLeosTcePbtEncapTnlTable
Description and OID
Status
The (conceptual) table listing the PBT encap tunnels. To create entry in this current
table use SNMP multiple set operation. wwpLeosTcePbtEncapTnlName must
be specified. wwpLeosTcePbtEncapTnlRemoteBridgeIndex must be
specified. wwpLeosTcePbtEncapTnlBvId must be specified.
wwpLeosTcePbtEncapTnlPgId must be specified.
wwpLeosTcePbtEncapTnlRowStatus must be specified.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.38.1.1.10.6
wwpLeosTcePbtEncapTnlEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
accessible-fornotify
Status
Access
This represents the encap tunnel name. This object cannot be modified.
current
read-create
Status
Access
This object represents the PBT encap tunnel remote bridge index.
current
read-create
Status
Access
This object represents the PBT encap tunnel remote bridge name.
current
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1
wwpLeosTcePbtEncapTnlIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.1
wwpLeosTcePbtEncapTnlName
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.2
wwpLeosTcePbtEncapTnlRemoteBridgeIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.3
wwpLeosTcePbtEncapTnlRemoteBridgeName
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-17
wwpLeosTcePbtEncapTnlGroupIndex
Description and OID
Status
Access
current
read-create
Status
Access
current
read-only
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
current
read-only
Status
Access
Each Bit Represents a fault. Value 0 represents no fault. First LSB represents current
port Fault. Second LSB represents CFM fault and third LSB represent Admin
Fault.
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.5
wwpLeosTcePbtEncapTnlGroupName
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.6
wwpLeosTcePbtEncapTnlBvId
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.7
wwpLeosTcePbtEncapTnlPgId
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.8
wwpLeosTcePbtEncapTnlPortName
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.9
wwpLeosTcePbtEncapTnlFaults
Description and OID
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-18 WWP-LEOS-PBT-MIB
wwpLeosTcePbtEncapTnlAdminState
Description and OID
Status
Access
current
read-create
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-create
Status
Access
This object represents the PBT encap tunnel paired operational state.
current
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.11
wwpLeosTcePbtEncapTnlOperState
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.12
wwpLeosTcePbtEncapTnlFwdState
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.13
wwpLeosTcePbtEncapTnlPaired
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.14
wwpLeosTcePbtEncapTnlPairIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.15
wwpLeosTcePbtEncapTnlPairOperState
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.16
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-19
wwpLeosTcePbtEncapTnlFrameCosPolicy
Description and OID
Status
Access
This object represents the PBT encap tunnel frame CoS policy.
current
read-create
Status
Access
This object represents the PBT encap tunnel CoS map index.
current
read-create
Status
Access
This object represents the PBT encap tunnel frame CoS map name.
current
read-only
Status
Access
current
read-create
Status
Access
This object indicates whether the PBT encap tunnel has CFM configured.
current
read-only
Status
Access
This object represents the PBT encap tunnel paired decap index.
current
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.17
wwpLeosTcePbtEncapTnlFrameCosMapIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.18
wwpLeosTcePbtEncapTnlFrameCosMapName
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.19
wwpLeosTcePbtEncapTnlFixedPcp
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.20
wwpLeosTcePbtEncapTnlCfmConfigured
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.21
wwpLeosTcePbtEncapTnlPairedDecapIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.22
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-20 WWP-LEOS-PBT-MIB
wwpLeosTcePbtEncapTnlPairedDecapName
Description and OID
Status
Access
This object represents the PBT encap tunnel paired decap name.
current
read-only
Status
Access
current
read-create
Status
Access
This object indicates whether the PBT encap tunnel has statistics enabled.
current
read-only
Status
Access
current
read-create
Status
Access
This object represents the PBT encap tunnel local bridge name.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.23
wwpLeosTcePbtEncapTnlWeight
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.24
wwpLeosTcePbtEncapTnlStatsEnabled
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.25
wwpLeosTcePbtEncapTnlLocalBridgeIndex
Description and OID
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.26
wwpLeosTcePbtEncapTnlLocalBridgeName
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.27
wwpLeosTcePbtEncapTnlReversionToPairIndex
Description and OID
Reversion occurs to this tunnel pair index in a tunnel group and is used in the current
definition of trap..
accessible-fornotify
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.28
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-21
wwpLeosTcePbtEncapTnlReversionFromPairIndex
Description and OID
Status
Access
Reversion occurs from this tunnel pair index in a tunnel group and is used in
the definition of trap.
current
accessible-fornotify
Status
Access
Setting this object to 'createAndGo' creates the entryin the table. Setting this
object to 'destroy' deletes the entry from the table.
current
read-create
Status
Access
The (conceptual) table listing the PBT decap tunnels. To create entry in this
table use the SNMP multiple set operation. wwpLeosTcePbtDecapTnlName
must be specified. wwpLeosTcePbtDecapTnlBvId must be specified.
wwpLeosTcePbtDecapTnlPgId must be specified.
wwpLeosTcePbtDecapTnlRowStatus must be specified.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This represents the decap tunnel name. This object cannot be modified.
current
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.29
wwpLeosTcePbtEncapTnlRowStatus
1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.64
wwpLeosTcePbtDecapTnlTable
1.3.6.1.4.1.6141.2.60.38.1.1.10.7
wwpLeosTcePbtDecapTnlEntry
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1
wwpLeosTcePbtDecapTnlIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.1
wwpLeosTcePbtDecapTnlName
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-22 WWP-LEOS-PBT-MIB
wwpLeosTcePbtDecapTnlRemoteBridgeIndex
Description and OID
Status
Access
This object represents the PBT decap tunnel remote bridge index.
current
read-create
Status
Access
This object represents the PBT decap tunnel remote bridge name.
current
read-only
Status
Access
current
read-create
Status
Access
current
read-only
Status
Access
This object represents the PBT decap tunnel BVID. This object cannot be
modified after create.
current
read-create
Status
Access
This object represents the PBT decap tunnel port. This okbect cannot be
modified after create.
current
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.3
wwpLeosTcePbtDecapTnlRemoteBridgeName
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.4
wwpLeosTcePbtDecapTnlGroupIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.5
wwpLeosTcePbtDecapTnlGroupName
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.6
wwpLeosTcePbtDecapTnlBvId
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.7
wwpLeosTcePbtDecapTnlPgId
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-23
wwpLeosTcePbtDecapTnlPortName
Description and OID
Status
Access
current
read-only
Status
Access
Each Bit Represents a fault. Value 0 represents no fault. First LSB represents current
port Fault. Second LSB represents CFM fault and value 3 represents port and
CFM fault.
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.9
wwpLeosTcePbtDecapTnlFaults
Description and OID
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.10
wwpLeosTcePbtDecapTnlOperState
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.11
wwpLeosTcePbtDecapTnlFwdState
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.12
wwpLeosTcePbtDecapTnlPaired
Description and OID
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.13
wwpLeosTcePbtDecapTnlPairIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.14
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-24 WWP-LEOS-PBT-MIB
wwpLeosTcePbtDecapTnlPairOperState
Description and OID
Status
Access
This object represents the PBT decap tunnel pair operational state.
current
read-only
Status
Access
This object represents the PBT decap tunnel resolved CoS policy.
current
read-create
Status
Access
This object represents the PBT decap tunnel resolved CoS map index.
current
read-create
Status
Access
This object represents the PBT decap tunnel resolved CoS map name.
current
read-only
Status
Access
This object indicates whether the PBT decap tunnel has CFM configured.
current
read-only
Status
Access
This object represents the PBT decap tunnel paired encap tunnel index.
current
read-only
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.15
wwpLeosTcePbtDecapTnlResolvedCosPolicy
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.16
wwpLeosTcePbtDecapTnlResolvedCosMapIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.17
wwpLeosTcePbtDecapTnlResolvedCosMapName
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.18
wwpLeosTcePbtDecapTnlCfmConfigured
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.19
wwpLeosTcePbtDecapTnlPairedEncapIndex
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.20
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-25
wwpLeosTcePbtDecapTnlPairedEncapName
Description and OID
Status
Access
This object represents the PBT decap tunnel paired encap tunnel name.
current
read-only
Status
Access
This object indicates whether the PBT decap tunnel has statistics enabled.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.21
wwpLeosTcePbtDecapTnlStatsEnabled
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.22
wwpLeosTcePbtDecapTnlRowStatus
Description and OID
Setting this object to 'createAndGo' creates the entry in the table. Setting this current
object to 'destroy' deletes the entry from the table.
read-create
1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.64
wwpLeosTcePbtServiceUserFrameL2TransformTable
Description and OID
Status
current
PBT service user frame L2 Transform table. Two entries in this table are
automatically
created when a PBT service is created (one for ingress and
one for egress).
The entries are deleted from this table when the
corresponding pbt service is deleted.
Therefore, there is no rowStatus field
in this table entry.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.38.1.1.10.8
wwpLeosTcePbtServiceUserFrameL2TransformEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1
wwpLeosTcePbtServiceUserFrameL2TransformDirection
1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-26 WWP-LEOS-PBT-MIB
wwpLeosTcePbtServiceUserFrameL2TransformTagIndex
Description and OID
Status
This object specifies pbt service user frame L2 Transform direction entry index. current
Initial deployment supports a single tag transform. As such, tag index 2 always
has the tag action of none(1).
Access
not-accessible
1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.2
wwpLeosTcePbtServiceUserFrameL2TransformTagAction
Description and OID
Status
This object specifies pbt service L2 Transform Action Type. Initial deployment current
supports egress/encap actions including none(1) and push(2). Initial
deployment supports ingress/decap actions including none(1) and pop(3).
Access
read-write
1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.3
wwpLeosTcePbtServiceUserFrameL2TransformTagValue
Description and OID
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.4
wwpLeosTcePbtServiceUserFrameL2TransformTagEtype
Description and OID
This object specifies the L2 transform Etype. The Etype must be specified for current
a push action. The Etype MAY be specified for a stamp action.
read-write
1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.5
wwpLeosTcePbtServiceUserFrameL2TransformTagPriority
Description and OID
Status
This object specifies the L2 transform tag static or fixed priority. Use of this current
value depends on the L2 transform action, e.g., push or stamp, as well as the
priority policy.
Access
read-write
1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.6
wwpLeosTcePbtServiceUserFrameL2TransformPriPolicy
Description and OID
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.7
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-27
wwpLeosTcePbtServiceUserFrameL2TransformUseTagValue
Description and OID
Status
Access
This object specifies whether the tag value is used when stamping. If the
action is to push, the tag value is always used.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.8
wwpLeosTcePbtServiceUserFrameL2TransformUseTagEtype
Description and OID
This object specifies whether to use the tag Ethertype when stamping. If the current
action is to push, the tag Ethertype is always used.
read-write
1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.9
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
wwpLeosPbtTunnelFaultNotification
This notification is sent every time the tunnel becomes operationally down.
Variable bindings include: wwpLeosVplsEncapTunnelId
Object Identifier: 1.3.6.1.4.1.6141.2.60.38.2.0.1
Status: deprecated
Supported Platforms: none
wwpLeosPbtTunnelReversionNotification
This notification is sent every time backup tunnel reverts back to primary
tunnel, once primary tunnel comes up. Variable binding
wwpLeosVplsEncapTunnelId represents the primary tunnel ID.
Object Identifier: 1.3.6.1.4.1.6141.2.60.38.2.0.2
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPbtTunnelActivateNotification
This notification is sent every time tunnel is activated. Variable binding
wwpLeosVplsEncapTunnelId represents the tunnel ID.
Object Identifier: 1.3.6.1.4.1.6141.2.60.38.2.0.3
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
45-28 WWP-LEOS-PBT-MIB
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPbtTunnelDeactivateNotification
This notification is sent every time tunnel is de-activated. Variable binding
wwpLeosVplsEncapTunnelId represents the tunnel ID.
Object Identifier: 1.3.6.1.4.1.6141.2.60.38.2.0.4
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosTcePbtTunnelActivateNotification
This notification is sent everytime tunnel of the given tunnel group is activated.
Object Identifier: 1.3.6.1.4.1.6141.2.60.38.2.0.10
Status: current
Supported Platforms:
wwpLeosTcePbtTunnelDeactivateNotification
This notification is sent everytime tunnel of the given tunnel group is
deactivated. Variable bindings include: wwpLeosTcePbtEncapTnlIndex,
wwpLeosTcePbtEncapTnlName, wwpLeosTcePbtTnlGroupIndex,
wwpLeosTcePbtTnlGroupName, and wwpLeosTcePbtEncapTnlFwdState.
Object Identifier: 1.3.6.1.4.1.6141.2.60.38.2.0.11
Status: current
Supported Platforms: none
wwpLeosTcePbtTunnelReversionNotification
Upon the failure of the primary tunnel, traffic is moved over to the backup
tunnel at the tunnel ingress. Tunnel reversion signifies the restoration of traffic
from this backup tunnel (now active) to the primary (now standby) after the
primary tunnel is restored. This notification is generated when this reversion
occurs. Variable bindings include: wwpLeosTcePbtTnlGroupIndex,
wwpLeosTcePbtTnlGroupName,
wwpLeosTcePbtEncapTnlReversionToPairIndex, and
wwpLeosTcePbtEncapTnlReversionFromPairIndex.
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PBT-MIB 45-29
MIB Reference
009-3220-011 Standard Revision A
August 2013
46-1
WWP-LEOS-PING-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-PING-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosPingDelay
Description and OID
Status
This object specifies the minimum amount of time to wait before sending the current
next packet in a sequence after receiving a response or declaring a timeout
for a previous packet.
Access
read-write
1.3.6.1.4.1.6141.2.60.19.1.1
wwpLeosPingPacketSize
Description and OID
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.19.1.2
wwpLeosPingActivate
Description and OID
Ping can be activated by setting this object to true. Once the ping operation is current
completed, the object is set to 'false'. This object can be set to 'false' by the
Management Station to stop the ping.
read-write
1.3.6.1.4.1.6141.2.60.19.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
46-2 WWP-LEOS-PING-MIB
wwpLeosPingAddrType
Description and OID
Status
Access
current
The address type associated with wwpLeosPingAddr. With the new
wwpLeosPingInetAddrType being introduced to support RFC 4001, this OID is
only used when wwpLeosPingAddr is a host name or an IPv4 address.
Otherwise, it is set to other(0).
read-only
1.3.6.1.4.1.6141.2.60.19.1.4
wwpLeosPingAddr
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
The number of ping packets that have been sent to the target.
current
read-only
Status
Access
The number of ping packets that have been received from the target.
current
read-only
1.3.6.1.4.1.6141.2.60.19.1.5
wwpLeosPingPacketCount
1.3.6.1.4.1.6141.2.60.19.1.6
wwpLeosPingPacketTimeout
1.3.6.1.4.1.6141.2.60.19.1.7
wwpLeosPingSentPackets
1.3.6.1.4.1.6141.2.60.19.1.8
wwpLeosPingReceivedPackets
1.3.6.1.4.1.6141.2.60.19.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PING-MIB 46-3
wwpLeosPingFailCause
Description and OID
Status
Access
current
read-only
Status
Access
The state of the ping process. The possible states include pinging, idle,
complete or failed.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.19.1.10
wwpLeosPingState
1.3.6.1.4.1.6141.2.60.19.1.11
wwpLeosPingUntilStopped
Description and OID
Setting this object to true prior to wwpLeosPingActivate causes the device to current
ping the specified host until wwpLeosPingActivate is set to false. The object
cannot be modified once the ping is active. The object returns to 'false' once
the ping is halted.
read-write
1.3.6.1.4.1.6141.2.60.19.1.12
wwpLeosPingInetAddrType
Description and OID
Status
Access
The Inet address type associated with wwpLeosPingAddr. When set to: ipv4 : current
wwpLeosPingAddr should be compliant with
InetAddressIPv4 from RFC
4001 ipv6 : wwpLeosPingAddr should be compliant with
InetAddressIPv6
from RFC 4001.
read-only
1.3.6.1.4.1.6141.2.60.19.1.13
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
47-1
WWP-LEOS-PORT-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-PORT-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosEtherPortTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
Port ID for the instance. Port ID's start at 1, and may not be consecutive for current
each additional port. This Port ID should refer to the dot1dBasePort in the
Dot1dBasePortEntry.
read-only
1.3.6.1.4.1.6141.2.60.2.1.1.1
wwpLeosEtherPortEntry
1.3.6.1.4.1.6141.2.60.2.1.1.1.1
wwpLeosEtherPortId
Description and OID
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
47-2 WWP-LEOS-PORT-MIB
wwpLeosEtherPortName
Description and OID
Status
Access
A textual string containing information about the port. This string should
indicate the physical location of the port as well.
current
read-only
Status
Access
current
read-write
Status
Access
current
read-only
Status
Access
The ethernet MAC address for the port. This information can also be found via current
dot1dTpFdbTable.
read-only
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.2
wwpLeosEtherPortDesc
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.3
wwpLeosEtherPortType
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.4
wwpLeosEtherPortPhysAddr
Description and OID
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.5
wwpLeosEtherPortAutoNeg
Description and OID
Status
current
This object sets the port to AUTO-NEG mode and vice versa. Specific
platforms may have requirements of configuring speed before moving the port
out of AUTO-NEG mode.
Access
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.6
wwpLeosEtherPortAdminStatus
Description and OID
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-MIB 47-3
wwpLeosEtherPortOperStatus
Description and OID
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.8
wwpLeosEtherPortAdminSpeed
Description and OID
Desired speed of the port. Set the port speed to be either 10MB, 100MB, or current
gig. Set the port speed to auto to enable automatic port speed detection. The
default value for this object depends on the platform.
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.9
wwpLeosEtherPortOperSpeed
Description and OID
Status
Access
deprecated
read-only
Status
Access
The desired mode for the port. It can be set to either half or full duplex
operation. The default value for this object depends on the platform.
current
read-write
Status
Access
current
read-only
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.10
wwpLeosEtherPortAdminDuplex
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.11
wwpLeosEtherPortOperDuplex
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.12
wwpLeosEtherPortAdminFlowCtrl
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.13
MIB Reference
009-3220-011 Standard Revision A
August 2013
47-4 WWP-LEOS-PORT-MIB
wwpLeosEtherPortOperFlowCtrl
Description and OID
Status
Access
current
read-only
Status
Access
The Ingress PVID, the VLAN ID associated with untagged frames ingressing
the port or if tunnel is enabled on this port. The max value for this object is
platform dependent. Refer to architecture document for details on platform
dependency.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.14
wwpLeosEtherIngressPvid
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.15
wwpLeosEtherUntagEgressVlanId
Description and OID
current
All the egress frames whose VLAN ID matches the
wwpLeosEtherUntagEgressVlanId, egress the port as untagged. To egress
the frames as tagged set wwpLeosEtherUntagEgressVlanId to 0. The max
value for this object is platform dependent. Refer to architecture document for
details on platform dependency.
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.16
wwpLeosEtherPortAcceptableFrameTypes
Description and OID
Status
Access
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.17
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-MIB 47-5
wwpLeosEtherPortUntaggedPriority
Description and OID
Status
The 802.1p packet priority to be assigned to packets ingressing this port that deprecated
do not have an 802.1Q VLAN header. This priority is also assigned to ingress
frame if tunnel is enabled on this port.
Access
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.18
wwpLeosEtherPortMaxFrameSize
Description and OID
Status
This object sets the max frame size allowed on a port. The max frame size can current
vary from 1522 bytes to 9216 bytes. Default value is 1526 bytes.
Access
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.19
wwpLeosEtherPortVlanIngressFiltering
Description and OID
Status
When this is true(1) the device discards incoming frames for VLANs that do not current
include this port in its member set. When false(2), the port accepts all
incoming frames.
Access
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.20
wwpLeosEtherPortAdminAdvertisedFlowCtrl
Description and OID
Status
Access
This object specifies the advertised flow control for given port.
current
read-write
Status
Access
This object specifies whether port is in subscriber type, network facing side or current
both.
read-only
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.21
wwpLeosEtherPortVplsPortType
Description and OID
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.22
wwpLeosEtherPortIngressCosPolicy
Description and OID
Status
This object specifies the ingress CoS policy to be applied to all frames coming current
in on the given port.
Access
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.23
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
47-6 WWP-LEOS-PORT-MIB
wwpLeosEtherPortIngressFixedDot1dPri
Description and OID
Status
The 802.1p packet priority to be assigned to packets ingressing this port that current
do not have an 802.1Q VLAN header. This priority is also assigned to ingress
untagged frame if the virtual switch CoS policy is set to 'fix' for a given port.
Access
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.24
wwpLeosEtherPortUntagDataVsi
Description and OID
Status
Access
This object specifies the virtual switch to be used for this port if data frame is
untagged. If this object is set to 0 then the device unsets this object. When
setting this object to MPLS Vsi Index, wwpLeosEtherPortUntagDataVsiType
must also be set to MPLS (Use multiple set operation)
current
read-write
Status
Access
An estimate of the port's current bandwidth in kilobits per second for given port. current
read-only
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.25
wwpLeosEtherPortOperationalSpeed
Description and OID
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.26
wwpLeosEtherPortUntagCtrlVsi
Description and OID
Status
This object specifies the virtual switch to be used for this port if control frame current
is untagged. If this object is set to 0 then the device unsets this object. When
setting this object to MPLS Vsi Index, wwpLeosEtherPortUntagCtrlVsiType
must also be set to MPLS (Use multiple set operation)
Access
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.27
wwpLeosEtherPortMirrorPort
Description and OID
Status
current
This object defines whether the port allows traffic from other ports to be
mirrored to this port. To allow traffic from other ports to be sent to this port, set
this object to True(1). This port is known as a mirror port. If set to true, other
ports can set the values of their wwpLeosEtherPortMirrorIngress or
wwpLeosEtherPortMirrorEgress objects to the port index of this port. Setting
this object to false(2) disables this port as a mirror port.
Access
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.28
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-MIB 47-7
wwpLeosEtherPortMirrorIngress
Description and OID
Status
The value of this object is the port index of a mirror port. The ingress traffic of current
this port can be mirrored by setting the destination port's
wwpLeosEtherPortMirrorPort object to true. If the value of this object is set to
zero this port's ingress traffic is not mirrored.
Access
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.29
wwpLeosEtherPortMirrorEgress
Description and OID
Status
The value of this object is the port index of a mirror port. The egress traffic of current
this port can be mirrored by setting the destination port's
wwpLeosEtherPortMirrorPort object to true. If the value of this object is set to
zero this port's egress traffic is not mirrored.
Access
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.30
wwpLeosEtherPortUntagDataVsiType
Description and OID
Status
This object specifies the virtual switch instance type associated with this port. current
This object defaults to ethernet and specifies if
wwpLeosEtherPortUntagDataVsi belongs to ethernet virtual switch table
(wwpLeosVplsVirtualSwitchEthTable in WWP-LEOS-VPLS-MIB) or MPLS
virtual switch table (wwpLeosVplsVirtualSwitchMplsTable in WWP-LEOSVPLS-MIB). When setting wwpLeosEtherPortUntagDataVsi to MPLS Vsi
Index this object must also be set to MPLS (Use multiple set operation).
Access
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.31
wwpLeosEtherPortUntagCtrlVsiType
Description and OID
Status
This object specifies the virtual switch instance type associated with this port. current
This object defaults to ethernet and specifies if
wwpLeosEtherPortUntagCtrlVsi belongs to ethernet virtual switch table
(wwpLeosVplsVirtualSwitchEthTable) or MPLS virtual switch table
(wwpLeosVplsVirtualSwitchMplsTable). When setting
wwpLeosEtherPortUntagCtrlVsi to MPLS Vsi Index this object must also be set
to MPLS (Use multiple set operation)
Access
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.32
MIB Reference
009-3220-011 Standard Revision A
August 2013
47-8 WWP-LEOS-PORT-MIB
wwpLeosEtherPortVsIngressFiltering
Description and OID
Status
This item is applicable to this port when the port is added as a per-port member current
to a virtual switch. If true(1) the device discards incoming tagged frames. If
false(2) the device forwards incoming tagged frames so long as those
customer tagged frames do not match another virtual switch with this port
included as a per-port-per-vlan member.
Access
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.33
wwpLeosEtherPortOperAutoNeg
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The Ingress Untagged Data Vid, the VLAN ID stamped on untagged frames
ingressing the port, or, if tunnel is enabled on this port. To disable tagging of
untagged data on ingress write a value of 0. The max value for this object is
platform dependent. Refer to architecture document for details on platform
dependency.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.34
wwpLeosEtherPortUpTime
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.35
wwpLeosEtherPortUntagDataVid
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.36
wwpLeosEtherPortPhyLoopback
Description and OID
This object defines whether the phy has been placed in loopback mode, which current
causes frames egressing the port to be looped back to the port.
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.37
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-MIB 47-9
wwpLeosEtherPortVlanIngressFilterStrict
Description and OID
Status
Access
This item is applicable to this port when the port is added as a to a virtual
switch. If true(1) the legacy ingress filter behavior is enforced at member
addition (drop bit is set to drop untagged traffic). If false, the splat bit is not
changed. Note that external VLAN associations are also maintained when
strict is false.
current
read-write
Status
Access
This object defines whether the MAC SA and DA are swapped on frames
egressing the port. This only works on a 311V.
current
read-write
Status
Access
This object defines whether the MAC SA and DA are swapped on specific
VLAN frames egressing the port. This only works on a 311V.
current
read-write
Status
Access
The Resolved Cost Policy. Setting this attribute is not supported in leos
version 4
current
read-write
Status
Access
The mode of the port Setting this attribute is not supported in leos version 4
current
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.38
wwpLeosEtherPortMacSaDaSwap
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.39
wwpLeosEtherPortMacSaDaSwapVlan
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.40
wwpLeosEtherPortResolvedCosPolicy
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.41
wwpLeosEtherPortMode
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.42
MIB Reference
009-3220-011 Standard Revision A
August 2013
47-10 WWP-LEOS-PORT-MIB
wwpLeosEtherFixedRcos
Description and OID
Status
Access
The fixed Resolve Cost value. Setting this attribute is not supported in leos
version 4
current
read-write
Status
Access
The Egress-port-Queue associated with this port. Setting this attribute is not
supported in leos version 4
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.43
wwpLeosEtherPortEgressPortQueueMapId
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.44
wwpLeosEtherPortResolvedCosMapId
Description and OID
RCOS map id for the port. Setting this attribute is not supported in leos version current
4
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.45
wwpLeosEtherPortResolvedCosRemarkL2
Description and OID
Status
This object specifies whether to remark L2 based on L3. This applies when the current
resolved CoS policy is either l3-dscp-cos or dot1d-tag1-cos but not when it is
fixed-cos policy. Setting this attribute is not supported in leos version 4
Access
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.46
wwpLeosEtherPortL2TransformMode
Description and OID
Status
Access
L2 transform action for port. Setting this attribute is not supported in leos
version 4
current
read-write
Status
Access
This object defines whether link flap detection is enabled on the port.
current
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.47
wwpLeosEtherPortLinkFlapDetection
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.48
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-MIB 47-11
wwpLeosEtherPortLinkFlapCount
Description and OID
Status
Access
This object defines how many link down events are required to trigger a link
flap event.
current
read-write
Status
Access
This object defines the time in seconds during which link down events are
accumlated to trigger a link flap event.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.49
wwpLeosEtherPortLinkFlapDetectTime
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.50
wwpLeosEtherPortLinkFlapHoldTime
Description and OID
current
This object defines the time in seconds that a port is operationally disabled
after a link flap event, before it is re-enabled. A value of zero causes the port
to remain disabled until manually enabled.
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.51
wwpLeosEtherFixedRColor
Description and OID
Status
This sets the fixed color to green (default) or yellow. Setting this attribute is not current
supported in saos version 4
Access
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.52
wwpLeosEtherPortFrameCosMapId
Description and OID
Status
Access
Frame COS map id for the port. Setting this attribute is not supported in leos
version 4
current
read-write
Status
Access
Sets the egress frame CoS policy Setting this attribute is not supported in
LEOS4.x
current
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.53
wwpLeosEtherPortEgressCosPolicy
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.54
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
47-12 WWP-LEOS-PORT-MIB
wwpLeosEtherPortEgressSpeed
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.55
wwpLeosEtherPortAdaptiveRateSpeed
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.56
wwpLeosEtherPortMirrorEncap
Description and OID
This object defines whether the port encapsulates mirrored frames by adding current
a vlan-tag. (Or, in the case where a mirrored frame is already tagged, by
adding a further vlan-tag to the frame) To allow mirrored traffic to be
encapsulated, set this object to vlan-tag(1). If set to vlan-tag, then the values
of wwpLeosEtherPortMirrorEncapVid and
wwpLeosEtherPortMirrorEncapTpid is used to populate tag added to each
mirrored frame. Setting this object to none(0) indicates no tag is added to the
mirrored frames.
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.57
wwpLeosEtherPortMirrorEncapVid
Description and OID
Status
This object defines the VID that is added to mirrored frames when the mirroring current
encapsulation mode is vlan-tag
Access
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.58
wwpLeosEtherPortMirrorEncapTpid
Description and OID
Status
Access
This object defines the tpid used in the tag that is added to mirrored frames,
when the mirroring encapsulation mode is vlan-tag
current
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.59
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-MIB 47-13
wwpLeosEtherPortIfgDecrease
Description and OID
Status
This object defines the number of bytes that are subtracted from the minimum current
standard IFG of 12 bytes as defined in IEEE 802.3. SAOS 39xx/51xx only
supports a value of 0 or 4.
Access
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.60
wwpLeosEtherPortAdvertSpeed
Description and OID
Status
This object defines the speed capabilities that are advertised during the auto- current
negotiation process.
Access
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.61
wwpLeosEtherPortAdvertDuplex
Description and OID
Status
This object defines the duplex capabilities that are advertised during the auto- current
negotiation process.
Access
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.1.1.62
wwpLeosEtherPortFlushTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
Setting this object to 'true' causes the MACs to be flushed for the port
specified by wwpLeosEtherPortId.
current
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.2
wwpLeosEtherPortFlushEntry
1.3.6.1.4.1.6141.2.60.2.1.1.2.1
wwpLeosEtherPortFlushActivate
1.3.6.1.4.1.6141.2.60.2.1.1.2.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
47-14 WWP-LEOS-PORT-MIB
wwpLeosEtherPortTrapsTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-write
Status
Access
This table is used to keep track of all the port state mirror groups. To create
entry in this table along with indexes, the following objects must be set using
multiple set operation: wwpLeosEtherPortStateMirrorGroupName must be
valid string. wwpLeosEtherPortStateMirrorGroupStatus must be set.
current
not-accessible
Status
Access
Each entry in this table defines the port state mirror group.
current
not-accessible
Status
Access
This object is used as index in the table and identifies the unique group id.
current
read-only
1.3.6.1.4.1.6141.2.60.2.1.1.3
wwpLeosEtherPortTrapsEntry
1.3.6.1.4.1.6141.2.60.2.1.1.3.1
wwpLeosEtherPortTrapsState
1.3.6.1.4.1.6141.2.60.2.1.1.3.1.1
wwpLeosEtherPortStateMirrorGroupTable
1.3.6.1.4.1.6141.2.60.2.1.1.4
wwpLeosEtherPortStateMirrorGroupEntry
1.3.6.1.4.1.6141.2.60.2.1.1.4.1
wwpLeosEtherPortStateMirrorGroupId
1.3.6.1.4.1.6141.2.60.2.1.1.4.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-MIB 47-15
wwpLeosEtherPortStateMirrorGroupName
Description and OID
Status
Access
current
read-create
Status
Access
current
read-only
Status
Access
This object specifies the total number of source ports that exist in the group.
current
read-only
Status
Access
This object specifies the total number of destination ports that exist in the
group.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.2.1.1.4.1.2
wwpLeosEtherPortStateMirrorGroupOperStatus
1.3.6.1.4.1.6141.2.60.2.1.1.4.1.3
wwpLeosEtherPortStateMirrorGroupNumSrcPorts
1.3.6.1.4.1.6141.2.60.2.1.1.4.1.4
wwpLeosEtherPortStateMirrorGroupNumDstPorts
1.3.6.1.4.1.6141.2.60.2.1.1.4.1.5
wwpLeosEtherPortStateMirrorGroupStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
read-create
1.3.6.1.4.1.6141.2.60.2.1.1.4.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
47-16 WWP-LEOS-PORT-MIB
wwpLeosEtherPortStateMirrorGroupType
Description and OID
Status
This object specifies the directional mode type for the port state mirror group. current
A uni-directional(1) mirror group type only mirrors the port state of the source
port(s) to the destination port(s). The bi-directional(2) mirror group type mirrors
state of either the source port(s) to the destination port(s) or the destination
port(s) to the source port(s). Where there are more than one source or
destination port the combined state of the source or destination group is the
combined 'OR'ed status of all the ports in either the source or destination
groups. In other words, if one or more source ports is 'UP' then the source
group is 'UP' and the mirrored destination state may be 'UP'. The default for
this object type is uni-directional.
Access
read-write
1.3.6.1.4.1.6141.2.60.2.1.1.4.1.7
wwpLeosEtherPortStateMirrorGroupMemTable
Description and OID
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.2.1.1.5
wwpLeosEtherPortStateMirrorGroupMemEntry
Description and OID
Each entry in this table is used to represent the membership of port to a given current
group and group type.
not-accessible
1.3.6.1.4.1.6141.2.60.2.1.1.5.1
wwpLeosEtherPortStateMirrorGroupMemType
Description and OID
Status
Setting this object specifies the type of group of which this port is member for current
a given port state mirror group. This object can only be set while creating the
entry. This object cannot be modified once the entry is created.
Access
read-create
1.3.6.1.4.1.6141.2.60.2.1.1.5.1.1
wwpLeosEtherPortStateMirrorGroupMemOperState
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.2.1.1.5.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-MIB 47-17
wwpLeosEtherPortStateMirrorGroupMemStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
Access
read-create
1.3.6.1.4.1.6141.2.60.2.1.1.5.1.3
wwpLeosEtherStndLinkUpDownTrapsEnable
Description and OID
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.2.1.2.1
wwpLeosEtherPortLinkUpDownTrapsEnable
Description and OID
Setting this object to 'true(1)' causes the propriatary specific port up/down trap current
to be generated.
read-write
1.3.6.1.4.1.6141.2.60.2.1.2.2
wwpLeosEtherAggPortLinkUpDownTrapsEnable
Description and OID
Status
Setting this object to 'true(1)' causes the proprietary specific aggregation port current
up down trap to be generated for a link state change on a physical port that
is a member of an aggregation group.
Access
read-write
1.3.6.1.4.1.6141.2.60.2.1.2.3
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
wwpLeosEthLinkUp
A wwpLeosEthLinkUp trap signifies that the SNMP entity, acting in an agent
role, has detected that the ifOperStatus object for one of its communication
links has entered the up state. Variable bindings include: sysName,
sysLocation, wwpLeosEtherPortId, wwpLeosEtherPortName,
wwpLeosEtherPortType, wwpLeosEtherPortAdminStatus,
wwpLeosEtherPortOperStatus, and wwpLeosEtherPortDesc.
Object Identifier: 1.3.6.1.4.1.6141.2.60.2.2.0.3
Status: current
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
47-18 WWP-LEOS-PORT-MIB
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosEthLinkDown
A wwpLeosEthLinkDown trap signifies that the SNMP entity, acting in an
agent role, has detected that the ifOperStatus object for one of its
communication links has entered the down state. Variable bindings include:
sysName, sysLocation, wwpLeosEtherPortId, wwpLeosEtherPortType,
wwpLeosEtherPortName, wwpLeosEtherPortAdminStatus,
wwpLeosEtherPortOperStatus, wwpLeosEtherPortDesc.
Object Identifier: 1.3.6.1.4.1.6141.2.60.2.2.0.4
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosEthAdminSpeedIncompatible
A wwpLeosEthAdminSpeedIncompatible trap is generated when the port
administrative speed doesn't match the speed of the SFP transceiver
installed. Variable bindings include: wwpLeosEtherPortId.
Object Identifier: 1.3.6.1.4.1.6141.2.60.2.2.0.5
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosEthLinkFlap
A wwpLeosEthLinkFlap trap signifies that the SNMP entity, acting in an agent
role, has detected that the ifOperStatus object for one of its communication
links has been changed due to link flap detection. Variable bindings include:
sysName, sysLocation, wwpLeosEtherPortId, wwpLeosEtherPortType,
wwpLeosEtherPortName, wwpLeosEtherPortOperStatus,
wwpLeosEtherPortDesc, and wwpLeosEtherPortLinkFlapHoldTime.
Object Identifier: 1.3.6.1.4.1.6141.2.60.2.2.0.6
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-MIB 47-19
wwpLeosAggLinkUpDown
A wwpLeosAggLinkUpDown trap signifies that the SNMP entity, acting in an
agent role, has detected that the ifOperStatus object for one of its
communication links has changed state. Variable bindings include: sysName,
sysLocation, wwpLeosEtherPortId, wwpLeosEtherPortName,
wwpLeosEtherPortDesc, wwpLeosEtherPortType,
wwpLeosEtherPortAdminStatus, wwpLeosEtherPortOperStatus,
dot3adAggPortActorAdminKey, dot3adAggPortListPorts,
wwpLeosEtherPortName, and wwpLeosEtherPortDesc.
Object Identifier: 1.3.6.1.4.1.6141.2.60.2.2.0.7
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
MIB Reference
009-3220-011 Standard Revision A
August 2013
48-1
WWP-LEOS-PORT-STATS-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-PORT-STATS-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosPortStatsReset
Description and OID
Status
Setting this object to 'reset' clears the statistics of all ports. A read on this object current
always returns 'none'.
Access
read-write
1.3.6.1.4.1.6141.2.60.3.1.1.1
wwpLeosPortStatsTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
The Id of the port for which this entry contains the stats.
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2
wwpLeosPortStatsEntry
1.3.6.1.4.1.6141.2.60.3.1.1.2.1
wwpLeosPortStatsPortId
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
48-2 WWP-LEOS-PORT-STATS-MIB
wwpLeosPortStatsRxBytes
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The total number of packets received that are less than 64 octets long
(excluding framing bits, but including FCS octets) and are otherwise well
formed.
current
read-only
Status
Access
The total number of packets received that are longer than 1518 octets
(excluding framing bits, but including FCS octets) and are otherwise well
formed.
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.2
wwpLeosPortStatsRxPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.3
wwpLeosPortStatsRxCrcErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.4
wwpLeosPortStatsRxBcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.5
wwpLeosPortStatsUndersizePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.6
wwpLeosPortStatsOversizePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-STATS-MIB 48-3
wwpLeosPortStatsFragmentPkts
Description and OID
Status
Access
current
The total number of packets received that are less than 64 octets in length
(excluding framing bits but including FCS octets) and have either a bad Frame
Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad
FCS with a non-integral number of octets (Alignment Error).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.8
wwpLeosPortStatsJabberPkts
Description and OID
Status
Access
current
The total number of packets received that are longer than 1518 octets
(excluding framing bits, but including FCS octets), and have either a bad
Frame Check Sequence (FCS) with an integral number of octets (FCS Error)
or a bad FCS with a non-integral number of octets (Alignment Error).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.9
wwpLeosPortStats64BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are 64
octets in length (excluding framing bits but including FCS octets).
current
read-only
Status
Access
The total number of packets (including bad packets) received that are between current
65 and 127 octets in length inclusive (excluding framing bits but including FCS
octets).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.10
wwpLeosPortStats65To127BytePkts
Description and OID
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.11
wwpLeosPortStats128To255BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are between current
128 and 255 octets in length inclusive (excluding framing bits but including
FCS octets).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
48-4 WWP-LEOS-PORT-STATS-MIB
wwpLeosPortStats256To511BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are between current
256 and 511 octets in length inclusive (excluding framing bits but including
FCS octets).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.13
wwpLeosPortStats512To1023BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are between current
512 and 1023 octets in length inclusive (excluding framing bits but including
FCS octets).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.14
wwpLeosPortStats1024To1518BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are between current
1024 and 1518 octets in length inclusive (excluding framing bits but including
FCS octets).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.15
wwpLeosPortStatsTxBytes
Description and OID
Status
Access
current
read-only
Status
Access
deprecated
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.16
wwpLeosPortStatsTxTBytes
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.17
wwpLeosPortStatsTxPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.18
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-STATS-MIB 48-5
wwpLeosPortStatsTxExDeferPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.19
wwpLeosPortStatsTxGiantPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.20
wwpLeosPortStatsTxUnderRunPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.21
wwpLeosPortStatsTxCrcErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.22
wwpLeosPortStatsTxLCheckErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.23
wwpLeosPortStatsTxLOutRangePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.24
MIB Reference
009-3220-011 Standard Revision A
August 2013
48-6 WWP-LEOS-PORT-STATS-MIB
wwpLeosPortStatsTxLateCollPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.25
wwpLeosPortStatsTxExCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.26
wwpLeosPortStatsTxSingleCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.27
wwpLeosPortStatsTxCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.28
wwpLeosPortStatsTxPausePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.29
wwpLeosPortStatsTxMcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.30
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-STATS-MIB 48-7
wwpLeosPortStatsTxBcastPkts
Description and OID
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.31
wwpLeosPortStatsPortReset
Description and OID
Setting this object resets the statistics of the given port. A read on this object current
always returns 'none'.
read-write
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.32
wwpLeosPortStatsRxMcastPkts
Description and OID
Status
Access
The total number of multicast packets received for the given port.
current
read-only
Status
Access
current
read-only
Status
Access
The total number of packets (including bad packets) received that are between current
1519 and 2047 octets in length inclusive (excluding framing bits but including
FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.33
wwpLeosPortStatsRxPausePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.34
wwpLeosPortStats1519To2047BytePkts
Description and OID
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.35
wwpLeosPortStats2048To4095BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are between current
2048 and 4095 octets in length inclusive (excluding framing bits but including
FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.36
MIB Reference
009-3220-011 Standard Revision A
August 2013
48-8 WWP-LEOS-PORT-STATS-MIB
wwpLeosPortStats4096To9216BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are between current
4096 and 9216 octets in length inclusive (excluding framing bits but including
FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.37
wwpLeosPortStatsTxDeferPkts
Description and OID
Status
Access
The transmit single deferral packet count for a port. Not Supported in LEOS 4.x current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.38
wwpLeosPortStatsTx64BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) transmitted that are 64
octets in length (excluding framing bits but including FCS octets). Not
Supported in LEOS 4.x
current
read-only
Status
Access
The total number of packets (including bad packets) transmitted that are
between 65 and 127 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
current
read-only
Status
Access
The total number of packets (including bad packets) transmitted that are
between 128 and 255 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.39
wwpLeosPortStatsTx65To127BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.40
wwpLeosPortStatsTx128To255BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.41
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-STATS-MIB 48-9
wwpLeosPortStatsTx256To511BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) transmitted that are
between 256 and 511 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
current
read-only
Status
Access
The total number of packets (including bad packets) transmitted that are
between 512 and 1023 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
current
read-only
Status
Access
current
The total number of packets (including bad packets) transmitted that are
between 1024 and 1518 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.42
wwpLeosPortStatsTx512To1023BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.43
wwpLeosPortStatsTx1024To1518BytePkts
Description and OID
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.44
wwpLeosPortStatsTx1519To2047BytePkts
Description and OID
Status
Access
current
The total number of packets (including bad packets) transmitted that are
between 1519 and 2047 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.45
wwpLeosPortStatsTx2048To4095BytePkts
Description and OID
Status
Access
current
The total number of packets (including bad packets) transmitted that are
between 2048 and 4095 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.46
MIB Reference
009-3220-011 Standard Revision A
August 2013
48-10 WWP-LEOS-PORT-STATS-MIB
wwpLeosPortStatsTx4096To9216BytePkts
Description and OID
Status
Access
current
The total number of packets (including bad packets) transmitted that are
between 4096 and 9216 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.47
wwpLeosPortStatsRxFpgaDropPkts
Description and OID
Status
Access
The total number of dropped packets on a port when traffic profiles are
enabled on the port. (311v only)
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The number of Unicast packets received by this port. Not Supported in leos 4.x current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.48
wwpLeosPortStatsPortLinkUp
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.49
wwpLeosPortStatsPortLinkDown
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.50
wwpLeosPortStatsPortLinkFlap
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.51
wwpLeosPortStatsRxUcastPkts
Description and OID
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.52
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-STATS-MIB 48-11
wwpLeosPortStatsTxUcastPkts
Description and OID
Status
Access
The number of Unicast packets transmitted by this port. Not Supported in leos current
4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.53
wwpLeosPortStatsRxDropPkts
Description and OID
Status
Access
current
read-only
Status
Access
The number of discarded received frames for this port including IPv6 L3, L3 IP current
Header and runt discards.
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.54
wwpLeosPortStatsRxDiscardPkts
Description and OID
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.55
wwpLeosPortStatsRxLOutRangePkts
Description and OID
Status
Access
The number of frames received by this port that exceed the maximum
permitted frame size. Not Supported in LEOS 4.x.
current
read-only
Status
Access
The number of frames dropped because the FPGA RX buffer is full. Only
supported on the 311V.
current
read-only
Status
Access
The number of frames dropped because the FPGA TX buffer is full. Only
supported on the 311V.
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.56
wwpLeosPortStatsRxFpgaBufferDropPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.57
wwpLeosPortStatsTxFpgaBufferDropPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.58
MIB Reference
009-3220-011 Standard Revision A
August 2013
48-12 WWP-LEOS-PORT-STATS-MIB
wwpLeosPortStatsFpgaVlanPriFilterDropPkts
Description and OID
Status
Access
The number of frames dropped by the transmit VLAN Priority Filter. Only
supported on the 311V.
current
read-only
Status
Access
The number of frames dropped by the FPGA because of receive errors. Only current
supported on the 311V.
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.59
wwpLeosPortStatsFpgaRxErrorPkts
Description and OID
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.60
wwpLeosPortStatsFpgaRxCrcErrorPkts
Description and OID
Status
Access
current
read-only
Status
Access
Number of frames dropped by the FPGA because of IP Checksum errors Only current
supported on the 311V
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.61
wwpLeosPortStatsFpgaRxIpCrcErrorPkts
Description and OID
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.62
wwpLeosPortStatsRxInErrorPkts
Description and OID
Status
Access
The number of inbound packets that contain errors preventing them from
being deliverable to a higher-layer protocol.
current
read-only
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.63
wwpLeosPortTotalStatsTable
1.3.6.1.4.1.6141.2.60.3.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-STATS-MIB 48-13
wwpLeosPortTotalStatsEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
The Id of the port for which this entry contains the stats.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1
wwpLeosPortTotalStatsPortId
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.1
wwpLeosPortTotalStatsRxBytes
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.2
wwpLeosPortTotalStatsRxPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.3
wwpLeosPortTotalStatsRxCrcErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.4
wwpLeosPortTotalStatsRxBcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
48-14 WWP-LEOS-PORT-STATS-MIB
wwpLeosPortTotalStatsUndersizePkts
Description and OID
Status
Access
The total number of packets received that are less than 64 octets long
(excluding framing bits, but including FCS octets) and are otherwise well
formed.
current
read-only
Status
Access
The total number of packets received that are longer than 1518 octets
(excluding framing bits, but including FCS octets) and are otherwise well
formed.
current
read-only
Status
Access
current
The total number of packets received that are less than 64 octets in length
(excluding framing bits but including FCS octets) and have either a bad Frame
Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad
FCS with a non-integral number of octets (Alignment Error).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.6
wwpLeosPortTotalStatsOversizePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.7
wwpLeosPortTotalStatsFragmentPkts
Description and OID
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.8
wwpLeosPortTotalStatsJabberPkts
Description and OID
Status
Access
current
The total number of packets received that are longer than 1518 octets
(excluding framing bits, but including FCS octets), and have either a bad
Frame Check Sequence (FCS) with an integral number of octets (FCS Error)
or a bad FCS with a non-integral number of octets (Alignment Error).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.9
wwpLeosPortTotalStats64BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are 64
octets in length (excluding framing bits but including FCS octets).
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-STATS-MIB 48-15
wwpLeosPortTotalStats65To127BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are between current
65 and 127 octets in length inclusive (excluding framing bits but including FCS
octets).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.11
wwpLeosPortTotalStats128To255BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are between current
128 and 255 octets in length inclusive (excluding framing bits but including
FCS octets).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.12
wwpLeosPortTotalStats256To511BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are between current
256 and 511 octets in length inclusive (excluding framing bits but including
FCS octets).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.13
wwpLeosPortTotalStats512To1023BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are between current
512 and 1023 octets in length inclusive (excluding framing bits but including
FCS octets).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.14
wwpLeosPortTotalStats1024To1518BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are between current
1024 and 1518 octets in length inclusive (excluding framing bits but including
FCS octets).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.15
MIB Reference
009-3220-011 Standard Revision A
August 2013
48-16 WWP-LEOS-PORT-STATS-MIB
wwpLeosPortTotalStatsTxBytes
Description and OID
Status
Access
current
read-only
Status
Access
deprecated
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.16
wwpLeosPortTotalStatsTxTBytes
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.17
wwpLeosPortTotalStatsTxPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.18
wwpLeosPortTotalStatsTxExDeferPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.19
wwpLeosPortTotalStatsTxGiantPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.20
wwpLeosPortTotalStatsTxUnderRunPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.21
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-STATS-MIB 48-17
wwpLeosPortTotalStatsTxCrcErrorPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.22
wwpLeosPortTotalStatsTxLCheckErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.23
wwpLeosPortTotalStatsTxLOutRangePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.24
wwpLeosPortTotalStatsTxLateCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.25
wwpLeosPortTotalStatsTxExCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.26
wwpLeosPortTotalStatsTxSingleCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.27
MIB Reference
009-3220-011 Standard Revision A
August 2013
48-18 WWP-LEOS-PORT-STATS-MIB
wwpLeosPortTotalStatsTxCollPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Setting this object resets the statistics of given port. A read on this object
always returns 'none'.
current
read-write
Status
Access
The total number of multicast packets received for the given port.
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.28
wwpLeosPortTotalStatsTxPausePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.29
wwpLeosPortTotalStatsTxMcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.30
wwpLeosPortTotalStatsTxBcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.31
wwpLeosPortTotalStatsPortReset
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.32
wwpLeosPortTotalStatsRxMcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.33
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-STATS-MIB 48-19
wwpLeosPortTotalStatsRxPausePkts
Description and OID
Status
Access
current
read-only
Status
Access
The total number of packets (including bad packets) received that are between current
1519 and 2047 octets in length inclusive (excluding framing bits but including
FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.34
wwpLeosPortTotalStats1519To2047BytePkts
Description and OID
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.35
wwpLeosPortTotalStats2048To4095BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are between current
2048 and 4095 octets in length inclusive (excluding framing bits but including
FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.36
wwpLeosPortTotalStats4096To9216BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are between current
4096 and 9216 octets in length inclusive (excluding framing bits but including
FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.37
wwpLeosPortTotalStatsTxDeferPkts
Description and OID
Status
Access
The total transmit single deferral packet count for a port. Not Supported in
LEOS 4.x
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.38
MIB Reference
009-3220-011 Standard Revision A
August 2013
48-20 WWP-LEOS-PORT-STATS-MIB
wwpLeosPortTotalStatsTx64BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) transmitted that are 64
octets in length (excluding framing bits but including FCS octets). Not
Supported in LEOS 4.x
current
read-only
Status
Access
The total number of packets (including bad packets) transmitted that are
between 65 and 127 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
current
read-only
Status
Access
The total number of packets (including bad packets) transmitted that are
between 128 and 255 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
current
read-only
Status
Access
The total number of packets (including bad packets) transmitted that are
between 256 and 511 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
current
read-only
Status
Access
The total number of packets (including bad packets) transmitted that are
between 512 and 1023 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.39
wwpLeosPortTotalStatsTx65To127BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.40
wwpLeosPortTotalStatsTx128To255BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.41
wwpLeosPortTotalStatsTx256To511BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.42
wwpLeosPortTotalStatsTx512To1023BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.43
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-STATS-MIB 48-21
wwpLeosPortTotalStatsTx1024To1518BytePkts
Description and OID
Status
Access
current
The total number of packets (including bad packets) transmitted that are
between 1024 and 1518 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.44
wwpLeosPortTotalStatsTx1519To2047BytePkts
Description and OID
Status
Access
current
The total number of packets (including bad packets) transmitted that are
between 1519 and 2047 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.45
wwpLeosPortTotalStatsTx2048To4095BytePkts
Description and OID
Status
Access
current
The total number of packets (including bad packets) transmitted that are
between 2048 and 4095 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.46
wwpLeosPortTotalStatsTx4096To9216BytePkts
Description and OID
Status
Access
current
The total number of packets (including bad packets) transmitted that are
between 4096 and 9216 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.47
wwpLeosPortTotalStatsRxFpgaDropPkts
Description and OID
Status
Access
The total number of dropped packets on a port when traffic profiles are
enabled on the port.(311v only)
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.48
MIB Reference
009-3220-011 Standard Revision A
August 2013
48-22 WWP-LEOS-PORT-STATS-MIB
wwpLeosPortTotalStatsPortLinkUp
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The total number of Unicast packets received by this port. Not Supported in
LEOS 4.x
current
read-only
Status
Access
The total number of Unicast packets transmitted by this port. Not Supported in current
LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.49
wwpLeosPortTotalStatsPortLinkDown
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.50
wwpLeosPortTotalStatsPortLinkFlap
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.51
wwpLeosPortTotalStatsRxUcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.52
wwpLeosPortTotalStatsTxUcastPkts
Description and OID
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.53
wwpLeosPortTotalStatsRxDropPkts
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.54
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-STATS-MIB 48-23
wwpLeosPortTotalStatsRxDiscardPkts
Description and OID
Status
Access
The total number of discarded received frames for this port including IPv6 L3, current
L3 IP Header and runt discards.
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.55
wwpLeosPortTotalStatsRxLOutRangePkts
Description and OID
Status
Access
The total number of frames received by this port that exceed the maximum
permitted frame size. Not Supported in LEOS 4.x.
current
read-only
Status
Access
The total number of frames dropped because the FPGA RX buffer is full. Only current
supported on the 311V.
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.56
wwpLeosPortTotalStatsRxFpgaBufferDropPkts
Description and OID
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.57
wwpLeosPortTotalStatsTxFpgaBufferDropPkts
Description and OID
Status
Access
The total number of frames dropped because the FPGA TX buffer is full Only current
supported on the 311V.
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.58
wwpLeosPortTotalStatsFpgaVlanPriFilterDropPkts
Description and OID
Status
Access
The total number of frames dropped by the transmit VLAN Priority Filter Only current
supported on the 311V.
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.59
wwpLeosPortTotalStatsFpgaRxErrorPkts
Description and OID
Status
Access
The total number of frames dropped by the FPGA because of receive errors. current
Only supported on the 311V.
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.60
MIB Reference
009-3220-011 Standard Revision A
August 2013
48-24 WWP-LEOS-PORT-STATS-MIB
wwpLeosPortTotalStatsFpgaRxCrcErrorPkts
Description and OID
Status
Access
The total number of frames dropped by the FPGA because of CRC errors. Only current
supported on the 311V.
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.61
wwpLeosPortTotalStatsFpgaRxIpCrcErrorPkts
Description and OID
Status
Access
The number of frames dropped by the FPGA because of IP Checksum errors current
Only supported on the 311V.
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.62
wwpLeosPortTotalStatsRxInErrorPkts
Description and OID
Status
Access
The number of inbound packets that contain errors preventing them from
being deliverable to a higher-layer protocol.
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
The Id of the port for which this entry contains the stats.
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.63
wwpLeosPortHCStatsTable
1.3.6.1.4.1.6141.2.60.3.1.1.4
wwpLeosPortHCStatsEntry
1.3.6.1.4.1.6141.2.60.3.1.1.4.1
wwpLeosPortHCStatsPortId
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-STATS-MIB 48-25
wwpLeosPortHCStatsRxBytes
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The total number of packets received that are less than 64 octets long
(excluding framing bits, but including FCS octets) and are otherwise well
formed.
current
read-only
Status
Access
The total number of packets received that are longer than 1518 octets
(excluding framing bits, but including FCS octets) and are otherwise well
formed.
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.2
wwpLeosPortHCStatsRxPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.3
wwpLeosPortHCStatsRxCrcErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.4
wwpLeosPortHCStatsRxBcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.5
wwpLeosPortHCStatsUndersizePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.6
wwpLeosPortHCStatsOversizePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
48-26 WWP-LEOS-PORT-STATS-MIB
wwpLeosPortHCStatsFragmentPkts
Description and OID
Status
Access
current
The total number of packets received that are less than 64 octets in length
(excluding framing bits but including FCS octets) and have either a bad Frame
Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad
FCS with a non-integral number of octets (Alignment Error).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.8
wwpLeosPortHCStatsJabberPkts
Description and OID
Status
Access
current
The total number of packets received that are longer than 1518 octets
(excluding framing bits, but including FCS octets), and have either a bad
Frame Check Sequence (FCS) with an integral number of octets (FCS Error)
or a bad FCS with a non-integral number of octets (Alignment Error).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.9
wwpLeosPortHCStats64BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are 64
octets in length (excluding framing bits but including FCS octets).
current
read-only
Status
Access
The total number of packets (including bad packets) received that are between current
65 and 127 octets in length inclusive (excluding framing bits but including FCS
octets).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.10
wwpLeosPortHCStats65To127BytePkts
Description and OID
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.11
wwpLeosPortHCStats128To255BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are between current
128 and 255 octets in length inclusive (excluding framing bits but including
FCS octets).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-STATS-MIB 48-27
wwpLeosPortHCStats256To511BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are between current
256 and 511 octets in length inclusive (excluding framing bits but including
FCS octets).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.13
wwpLeosPortHCStats512To1023BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are between current
512 and 1023 octets in length inclusive (excluding framing bits but including
FCS octets).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.14
wwpLeosPortHCStats1024To1518BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are between current
1024 and 1518 octets in length inclusive (excluding framing bits but including
FCS octets).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.15
wwpLeosPortHCStatsTxBytes
Description and OID
Status
Access
current
read-only
Status
Access
deprecated
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.16
wwpLeosPortHCStatsTxTBytes
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.17
wwpLeosPortHCStatsTxPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.18
MIB Reference
009-3220-011 Standard Revision A
August 2013
48-28 WWP-LEOS-PORT-STATS-MIB
wwpLeosPortHCStatsTxExDeferPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.19
wwpLeosPortHCStatsTxGiantPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.20
wwpLeosPortHCStatsTxUnderRunPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.21
wwpLeosPortHCStatsTxCrcErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.22
wwpLeosPortHCStatsTxLCheckErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.23
wwpLeosPortHCStatsTxLOutRangePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.24
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-STATS-MIB 48-29
wwpLeosPortHCStatsTxLateCollPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.25
wwpLeosPortHCStatsTxExCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.26
wwpLeosPortHCStatsTxSingleCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.27
wwpLeosPortHCStatsTxCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.28
wwpLeosPortHCStatsTxPausePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.29
wwpLeosPortHCStatsTxMcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.30
MIB Reference
009-3220-011 Standard Revision A
August 2013
48-30 WWP-LEOS-PORT-STATS-MIB
wwpLeosPortHCStatsTxBcastPkts
Description and OID
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.31
wwpLeosPortHCStatsPortReset
Description and OID
Setting this object resets the stats of given port. A read on this object always current
returns 'none'.
read-write
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.32
wwpLeosPortHCStatsRxMcastPkts
Description and OID
Status
Access
The total number of multicast packets received for the given port.
current
read-only
Status
Access
current
read-only
Status
Access
The total number of packets (including bad packets) received that are between current
1519 and 2047 octets in length inclusive (excluding framing bits but including
FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.33
wwpLeosPortHCStatsRxPausePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.34
wwpLeosPortHCStats1519To2047BytePkts
Description and OID
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.35
wwpLeosPortHCStats2048To4095BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are between current
2048 and 4095 octets in length inclusive (excluding framing bits but including
FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.36
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-STATS-MIB 48-31
wwpLeosPortHCStats4096To9216BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are between current
4096 and 9216 octets in length inclusive (excluding framing bits but including
FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.37
wwpLeosPortHCStatsTxDeferPkts
Description and OID
Status
Access
The transmit single deferral packet count for a port. Not Supported in LEOS 4.x current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.38
wwpLeosPortHCStatsTx64BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) transmitted that are 64
octets in length (excluding framing bits but including FCS octets). Not
Supported in LEOS 4.x
current
read-only
Status
Access
The total number of packets (including bad packets) transmitted that are
between 65 and 127 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
current
read-only
Status
Access
The total number of packets (including bad packets) transmitted that are
between 128 and 255 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.39
wwpLeosPortHCStatsTx65To127BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.40
wwpLeosPortHCStatsTx128To255BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.41
MIB Reference
009-3220-011 Standard Revision A
August 2013
48-32 WWP-LEOS-PORT-STATS-MIB
wwpLeosPortHCStatsTx256To511BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) transmitted that are
between 256 and 511 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
current
read-only
Status
Access
The total number of packets (including bad packets) transmitted that are
between 512 and 1023 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
current
read-only
Status
Access
current
The total number of packets (including bad packets) transmitted that are
between 1024 and 1518 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.42
wwpLeosPortHCStatsTx512To1023BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.43
wwpLeosPortHCStatsTx1024To1518BytePkts
Description and OID
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.44
wwpLeosPortHCStatsTx1519To2047BytePkts
Description and OID
Status
Access
current
The total number of packets (including bad packets) transmitted that are
between 1519 and 2047 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.45
wwpLeosPortHCStatsTx2048To4095BytePkts
Description and OID
Status
Access
current
The total number of packets (including bad packets) transmitted that are
between 2048 and 4095 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.46
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-STATS-MIB 48-33
wwpLeosPortHCStatsTx4096To9216BytePkts
Description and OID
Status
Access
current
The total number of packets (including bad packets) transmitted that are
between 4096 and 9216 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.47
wwpLeosPortHCStatsRxUcastPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The number of discarded received frames for this port including IPv6 L3, L3 IP current
Header and runt discards.
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.48
wwpLeosPortHCStatsTxUcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.49
wwpLeosPortHCStatsRxDropPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.50
wwpLeosPortHCStatsRxDiscardPkts
Description and OID
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.51
wwpLeosPortHCStatsRxLOutRangePkts
Description and OID
Status
Access
The number of frames received by this port that exceed the maximum
permitted frame size. Not Supported in LEOS 4.x
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.52
MIB Reference
009-3220-011 Standard Revision A
August 2013
48-34 WWP-LEOS-PORT-STATS-MIB
wwpLeosPortHCStatsRxInErrorPkts
Description and OID
Status
Access
The number of inbound packets that contain errors preventing them from
being deliverable to a higher-layer protocol.
current
read-only
Status
Access
The time system uptime of the last statistics refresh on the port.
current
read-only
Status
Access
The value of sysUpTime at the time of the last state change for the port. If the current
port state has been unchanged since the last re-initialization of the local
network management subsystem, then this object contains a zero value.
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.53
wwpLeosPortHCStatsLastRefresh
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.54
wwpLeosPortHCStatsLastChange
Description and OID
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.55
wwpLeosPortTotalHCStatsTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
The Id of the port for which this entry contains the stats.
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.5
wwpLeosPortTotalHCStatsEntry
1.3.6.1.4.1.6141.2.60.3.1.1.5.1
wwpLeosPortTotalHCStatsPortId
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-STATS-MIB 48-35
wwpLeosPortTotalHCStatsRxBytes
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The total number of packets received that are less than 64 octets long
(excluding framing bits, but including FCS octets) and are otherwise well
formed.
current
read-only
Status
Access
The total number of packets received that are longer than 1518 octets
(excluding framing bits, but including FCS octets) and are otherwise well
formed.
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.2
wwpLeosPortTotalHCStatsRxPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.3
wwpLeosPortTotalHCStatsRxCrcErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.4
wwpLeosPortTotalHCStatsRxBcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.5
wwpLeosPortTotalHCStatsUndersizePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.6
wwpLeosPortTotalHCStatsOversizePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
48-36 WWP-LEOS-PORT-STATS-MIB
wwpLeosPortTotalHCStatsFragmentPkts
Description and OID
Status
Access
current
The total number of packets received that are less than 64 octets in length
(excluding framing bits but including FCS octets) and have either a bad Frame
Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad
FCS with a non-integral number of octets (Alignment Error).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.8
wwpLeosPortTotalHCStatsJabberPkts
Description and OID
Status
Access
current
The total number of packets received that are longer than 1518 octets
(excluding framing bits, but including FCS octets), and have either a bad
Frame Check Sequence (FCS) with an integral number of octets (FCS Error)
or a bad FCS with a non-integral number of octets (Alignment Error).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.9
wwpLeosPortTotalHCStats64BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are 64
octets in length (excluding framing bits but including FCS octets).
current
read-only
Status
Access
The total number of packets (including bad packets) received that are between current
65 and 127 octets in length inclusive (excluding framing bits but including FCS
octets).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.10
wwpLeosPortTotalHCStats65To127BytePkts
Description and OID
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.11
wwpLeosPortTotalHCStats128To255BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are between current
128 and 255 octets in length inclusive (excluding framing bits but including
FCS octets).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-STATS-MIB 48-37
wwpLeosPortTotalHCStats256To511BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are between current
256 and 511 octets in length inclusive (excluding framing bits but including
FCS octets).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.13
wwpLeosPortTotalHCStats512To1023BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are between current
512 and 1023 octets in length inclusive (excluding framing bits but including
FCS octets).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.14
wwpLeosPortTotalHCStats1024To1518BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are between current
1024 and 1518 octets in length inclusive (excluding framing bits but including
FCS octets).
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.15
wwpLeosPortTotalHCStatsTxBytes
Description and OID
Status
Access
current
read-only
Status
Access
deprecated
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.16
wwpLeosPortTotalHCStatsTxTBytes
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.17
wwpLeosPortTotalHCStatsTxPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.18
MIB Reference
009-3220-011 Standard Revision A
August 2013
48-38 WWP-LEOS-PORT-STATS-MIB
wwpLeosPortTotalHCStatsTxExDeferPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.19
wwpLeosPortTotalHCStatsTxGiantPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.20
wwpLeosPortTotalHCStatsTxUnderRunPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.21
wwpLeosPortTotalHCStatsTxCrcErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.22
wwpLeosPortTotalHCStatsTxLCheckErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.23
wwpLeosPortTotalHCStatsTxLOutRangePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.24
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-STATS-MIB 48-39
wwpLeosPortTotalHCStatsTxLateCollPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.25
wwpLeosPortTotalHCStatsTxExCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.26
wwpLeosPortTotalHCStatsTxSingleCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.27
wwpLeosPortTotalHCStatsTxCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.28
wwpLeosPortTotalHCStatsTxPausePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.29
wwpLeosPortTotalHCStatsTxMcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.30
MIB Reference
009-3220-011 Standard Revision A
August 2013
48-40 WWP-LEOS-PORT-STATS-MIB
wwpLeosPortTotalHCStatsTxBcastPkts
Description and OID
Status
Access
current
read-only
Status
Access
Setting this object resets the stats of the given port. A read on this object
always returns 'none'.
current
read-write
Status
Access
The total number of multicast packets received for the given port.
current
read-only
Status
Access
current
read-only
Status
Access
The total number of packets (including bad packets) received that are between current
1519 and 2047 octets in length inclusive (excluding framing bits but including
FCS octets) Not Supported in LEOS 4.x.
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.31
wwpLeosPortTotalHCStatsPortReset
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.32
wwpLeosPortTotalHCStatsRxMcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.33
wwpLeosPortTotalHCStatsRxPausePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.34
wwpLeosPortTotalHCStats1519To2047BytePkts
Description and OID
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.35
wwpLeosPortTotalHCStats2048To4095BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are between current
2048 and 4095 octets in length inclusive (excluding framing bits but including
FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.36
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-STATS-MIB 48-41
wwpLeosPortTotalHCStats4096To9216BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) received that are between current
4096 and 9216 octets in length inclusive (excluding framing bits but including
FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.37
wwpLeosPortTotalHCStatsTxDeferPkts
Description and OID
Status
Access
The total transmit single deferral packet count for a port. Not Supported in
LEOS 4.x
current
read-only
Status
Access
The total number of packets (including bad packets) transmitted that are 64
octets in length (excluding framing bits but including FCS octets). Not
Supported in LEOS 4.x
current
read-only
Status
Access
The total number of packets (including bad packets) transmitted that are
between 65 and 127 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
current
read-only
Status
Access
The total number of packets (including bad packets) transmitted that are
between 128 and 255 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.38
wwpLeosPortTotalHCStatsTx64BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.39
wwpLeosPortTotalHCStatsTx65To127BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.40
wwpLeosPortTotalHCStatsTx128To255BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.41
MIB Reference
009-3220-011 Standard Revision A
August 2013
48-42 WWP-LEOS-PORT-STATS-MIB
wwpLeosPortTotalHCStatsTx256To511BytePkts
Description and OID
Status
Access
The total number of packets (including bad packets) transmitted that are
between 256 and 511 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
current
read-only
Status
Access
The total number of packets (including bad packets) transmitted that are
between 512 and 1023 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
current
read-only
Status
Access
current
The total number of packets (including bad packets) transmitted that are
between 1024 and 1518 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.42
wwpLeosPortTotalHCStatsTx512To1023BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.43
wwpLeosPortTotalHCStatsTx1024To1518BytePkts
Description and OID
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.44
wwpLeosPortTotalHCStatsTx1519To2047BytePkts
Description and OID
Status
Access
current
The total number of packets (including bad packets) transmitted that are
between 1519 and 2047 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.45
wwpLeosPortTotalHCStatsTx2048To4095BytePkts
Description and OID
Status
Access
current
The total number of packets (including bad packets) transmitted that are
between 2048 and 4095 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.46
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-STATS-MIB 48-43
wwpLeosPortTotalHCStatsTx4096To9216BytePkts
Description and OID
Status
Access
current
The total number of packets (including bad packets) transmitted that are
between 4096 and 9216 octets in length inclusive (excluding framing bits but
including FCS octets). Not Supported in LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.47
wwpLeosPortTotalHCStatsRxUcastPkts
Description and OID
Status
Access
The total number of Unicast packets received by this port. Not Supported in
LEOS 4.x
current
read-only
Status
Access
The total number of Unicast packets transmitted by this port. Not Supported in current
LEOS 4.x
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.48
wwpLeosPortTotalHCStatsTxUcastPkts
Description and OID
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.49
wwpLeosPortTotalHCStatsRxDropPkts
Description and OID
Status
Access
current
read-only
Status
Access
The total number of discarded received frames for this port including IPv6 L3, current
L3 IP Header and runt discards.
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.50
wwpLeosPortTotalHCStatsRxDiscardPkts
Description and OID
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.51
wwpLeosPortTotalHCStatsRxLOutRangePkts
Description and OID
Status
Access
The total number of frames received by this port that exceed the maximum
permitted frame size. Not Supported in LEOS 4.x
current
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.52
MIB Reference
009-3220-011 Standard Revision A
August 2013
48-44 WWP-LEOS-PORT-STATS-MIB
wwpLeosPortTotalHCStatsRxInErrorPkts
Description and OID
Status
Access
The number of inbound packets that contain errors preventing them from
being deliverable to a higher-layer protocol.
current
read-only
Status
Access
The time system uptime of the last statistics refresh on the port.
current
read-only
Status
Access
The value of sysUpTime at the time of the last state change for the port. If the current
port state has been unchanged since the last re-initialization of the local
network management subsystem, then this object contains a zero value.
read-only
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.53
wwpLeosPortTotalHCStatsLastRefresh
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.54
wwpLeosPortTotalHCStatsLastChange
Description and OID
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.55
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
49-1
WWP-LEOS-PORT-XCVR-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-PORT-XCVR-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosPortXcvrTable
Description and OID
Status
Access
This table contains descriptions and settings for each of the physical
transceiver devices.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.4.1.1.1
wwpLeosPortXcvrEntry
1.3.6.1.4.1.6141.2.60.4.1.1.1.1
wwpLeosPortXcvrId
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.1
wwpLeosPortXcvrOperState
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
49-2 WWP-LEOS-PORT-XCVR-MIB
wwpLeosPortXcvrIdentiferType
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Type of Transceiver.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.3
wwpLeosPortXcvrExtIdentiferType
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.4
wwpLeosPortXcvrConnectorType
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.5
wwpLeosPortXcvrType
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.6
wwpLeosPortXcvrVendorName
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.7
wwpLeosPortXcvrVendorOUI
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-XCVR-MIB 49-3
wwpLeosPortXcvrVendorPN
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.9
wwpLeosPortXcvrRevNum
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.10
wwpLeosPortXcvrSerialNum
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.11
wwpLeosPortXcvrEncodingType
Description and OID
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.12
wwpLeosPortXcvrMfgDate
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.13
MIB Reference
009-3220-011 Standard Revision A
August 2013
49-4 WWP-LEOS-PORT-XCVR-MIB
wwpLeosPortXcvrComplianceVer
Description and OID
Status
Access
current
read-only
Status
Access
This represents the wavelength of the transceiver. Units are nano meter.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
This represents the measured receive power of the transceiver. Units are
micro Watts.
current
read-only
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.14
wwpLeosPortXcvrWaveLength
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.15
wwpLeosPortXcvrTemperature
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.16
wwpLeosPortXcvrVcc
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.17
wwpLeosPortXcvrBias
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.18
wwpLeosPortXcvrRxPower
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.19
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-XCVR-MIB 49-5
wwpLeosPortXcvrTxState
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.20
wwpLeosPortXcvrTxFaultStatus
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.21
wwpLeosPortXcvrRxRateStatus
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.22
wwpLeosPortXcvr9by125um
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.23
wwpLeosPortXcvr50by125um
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.24
wwpLeosPortXcvr62dot5by125um
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.25
MIB Reference
009-3220-011 Standard Revision A
August 2013
49-6 WWP-LEOS-PORT-XCVR-MIB
wwpLeosPortXcvrCu
Description and OID
Status
Access
current
read-only
Status
Access
Indicates the Tx Output power for the transceiver. Units are micro Watts.
current
read-only
Status
Access
Indicates the Loss Of Signal State for the optical transceiver. Ports without
optical transceiver will always report 'false'.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.26
wwpLeosPortXcvrTxOutputPw
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.27
wwpLeosPortXcvrLosState
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.28
wwpLeosPortXcvrDiagSupported
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.29
wwpLeosPortXcvrEnhDiagAlarmSupported
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.30
wwpLeosPortXcvrEnhDiagSoftTxDisableSupported
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.31
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-XCVR-MIB 49-7
wwpLeosPortXcvrEnhDiagSoftTxFaultSupported
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.32
wwpLeosPortXcvrEnhDiagRxLosSupported
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.33
wwpLeosPortXcvrHighTempAlarmThreshold
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.34
wwpLeosPortXcvrLowTempAlarmThreshold
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.35
wwpLeosPortXcvrHighVccAlarmThreshold
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.36
wwpLeosPortXcvrLowVccAlarmThreshold
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.37
MIB Reference
009-3220-011 Standard Revision A
August 2013
49-8 WWP-LEOS-PORT-XCVR-MIB
wwpLeosPortXcvrHighBiasAlarmThreshold
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Indicates the higher threshold for Tx power alarm. Units are micro watts
current
read-only
Status
Access
Indicates the lower threshold for Tx power alarm. Units are micro watts.
current
read-only
Status
Access
Indicates the higher threshold for Rx power alarm. Units are micro watts.
current
read-only
Status
Access
Indicates the lower threshold for Rx power alarm. Units are micro watts.
current
read-only
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.38
wwpLeosPortXcvrLowBiasAlarmThreshold
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.39
wwpLeosPortXcvrHighTxPwAlarmThreshold
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.40
wwpLeosPortXcvrLowTxPwAlarmThreshold
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.41
wwpLeosPortXcvrHighRxPwAlarmThreshold
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.42
wwpLeosPortXcvrLowRxPwAlarmThreshold
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.43
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-XCVR-MIB 49-9
wwpLeosPortXcvrEnhDiagRateSelectSupported
Description and OID
Status
Access
current
read-only
Status
Access
deprecated
read-write
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.44
wwpLeosPortXcvrAdminState
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.45
wwpLeosPortXcvrXfpMinBitRate
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.70
wwpLeosPortXcvrXfpMaxBitRate
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.71
wwpLeosPortXcvrXfpLinkLenSmf1km
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.72
wwpLeosPortXcvrXfpLinkLenE50u2m
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.73
MIB Reference
009-3220-011 Standard Revision A
August 2013
49-10 WWP-LEOS-PORT-XCVR-MIB
wwpLeosPortXcvrXfpLinkLen50u1m
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
This represents the device transmitter technology: Bit 3: Wavelength Control current
(active/none) Bit 2: Transmitter Cooling (cooled/uncooled) Bit 1: Detector Type
(apd/pin) Bit 0: Transmitter Tuning (Tunable/non-Tunable)
read-only
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.74
wwpLeosPortXcvrXfpLinkLen62dot5u1m
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.75
wwpLeosPortXcvrXfpLinkLenCopper1m
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.76
wwpLeosPortXcvrXfpDevTech
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.77
wwpLeosPortXcvrXfpTransmitterTech
Description and OID
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.78
wwpLeosPortXcvrXfpCdrSupport
Description and OID
Status
Access
This represents the CDR support: Bit 7: 9.95 Gb/s (yes/no) Bit 6: 10.3 Gb/s current
(yes/no) Bit 5: 10.5 Gb/s (yes/no) Bit 4: 10.7 Gb/s (yes/no) Bit 3: 11.1 Gb/
s (yes/no) Bit 2: N/A Bit 1: Lineside Loopback (yes/no) Bit 0: XFI Loopback
(yes/no)
read-only
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.79
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-XCVR-MIB 49-11
wwpLeosPortXcvrXfpWaveLengthTol
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.80
wwpLeosPortXcvrXfpMaxCaseTemp
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.81
wwpLeosPortXcvrXfpMaxPower
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.82
wwpLeosPortXcvrXfpMax5vCurrent
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.83
wwpLeosPortXcvrXfpMax3p3vCurrent
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.84
wwpLeosPortXcvrXfpMax1p8vCurrent
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.85
MIB Reference
009-3220-011 Standard Revision A
August 2013
49-12 WWP-LEOS-PORT-XCVR-MIB
wwpLeosPortXcvrXfpMaxNeg5p2vCurrent
Description and OID
Status
Access
current
read-only
Status
Access
This represents the diag monitor type: Bit 4 indicates BER support. Bit 3
indicates the Rx Power Meas. type of Avg or OMA.
current
read-only
Status
Access
This represents the enhanced options: Bit 7: VPS Support (yes/no) Bit 6: Soft current
TX_DISABLE (yes/no) Bit 5: Soft P_down (yes/no) Bit 4: VPS LV Regulator
Mode (yes/no) Bit 3: VPS bypassed Reg. Mode (yes/no) Bit 2: Active FEC Ctrl
(yes/no) Bit 1: Wavelength or frequency Tunability (yes/no) Bit 0: CMU Support
Mode (yes/no)
read-only
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.86
wwpLeosPortXcvrXfpDiagMonitorType
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.87
wwpLeosPortXcvrXfpEnhancedOptions
Description and OID
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.88
wwpLeosPortXcvrXfpAuxMonitoringInput1
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.89
wwpLeosPortXcvrXfpAuxMonitoringInput2
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.90
wwpLeosPortXcvrAdminFrequency
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.91
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-XCVR-MIB 49-13
wwpLeosPortXcvrXfpLaserFirstFrequency
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.92
wwpLeosPortXcvrXfpLaserLastFrquency
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.93
wwpLeosPortXcvrXfpMaxGridScacing
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.94
wwpLeosPortXcvrXfpChannelNum
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.95
wwpLeosPortXcvrXfpFrequencyError
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.96
wwpLeosPortXcvrAdminWavelength
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.97
MIB Reference
009-3220-011 Standard Revision A
August 2013
49-14 WWP-LEOS-PORT-XCVR-MIB
wwpLeosPortXcvrAdminChannel
Description and OID
Status
Access
current
read-write
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.98
wwpLeosPortXcvrXfpLaserFirstWavelenth
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.99
wwpLeosPortXcvrXfpLaserLastWavelength
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.100
wwpLeosPortXcvrXfpLaserFirstChannel
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.101
wwpLeosPortXcvrXfpLaserLastChannel
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.102
wwpLeosPortXcvrOperFrequency
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.103
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-XCVR-MIB 49-15
wwpLeosPortXcvrOperWavelength
Description and OID
Status
Access
current
read-only
Status
Access
Indicates the Rx power level in dBm after scaling and conversion to an integer. current
To convert back to dBm, convert this value to floating point and divide by
10,000.
read-only
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.104
wwpLeosPortXcvrRxDbmPower
Description and OID
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.105
wwpLeosPortXcvrTxDbmPower
Description and OID
Status
Access
Indicates the Tx power level in dBm after scaling and conversion to an integer. current
To convert back to dBm, convert this value to floating point and divide by
10,000.
read-only
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.106
wwpLeosPortXcvrHighTxDbmPwAlarmThreshold
Description and OID
Status
Access
current
Indicates the higher threshold for Tx power alarm in dBm after scaling and
conversion to an integer. To convert back to dBm, convert this value to floating
point and divide by 10,000.
read-only
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.107
wwpLeosPortXcvrLowTxDbmPwAlarmThreshold
Description and OID
Status
Access
current
Indicates the lower threshold for Tx power alarm in dBm after scaling and
conversion to an integer. To convert back to dBm, convert this value to floating
point and divide by 10,000.
read-only
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.108
MIB Reference
009-3220-011 Standard Revision A
August 2013
49-16 WWP-LEOS-PORT-XCVR-MIB
wwpLeosPortXcvrHighRxDbmPwAlarmThreshold
Description and OID
Status
Access
current
Indicates the higher threshold for Rx power alarm in dBm after scaling and
conversion to an integer. To convert back to dBm, convert this value to floating
point and divide by 10,000.
read-only
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.109
wwpLeosPortXcvrLowRxDbmPwAlarmThreshold
Description and OID
Status
Access
current
Indicates the lower threshold for Rx power alarm in dBm after scaling and
conversion to an integer. To convert back to dBm, convert this value to floating
point and divide by 10,000.
read-only
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.110
wwpLeosPortXcvrEventType
Description and OID
Status
Access
Indicates if the Xcvr specified by the wwpLeosPortXcvrId has come up, gone current
down or has been selected.
read-only
1.3.6.1.4.1.6141.2.60.4.1.2.1
wwpLeosPortXcvrErrorType
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.4.1.2.2
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
wwpLeosPortXcvrLinkStateChangeNotification
A wwpLeosPortXcvrLinkStateChangeNotification is sent if the Xcvr state has
changed. Variable bindings include: wwpLeosPortXcvrId and
wwpLeosPortXcvrEventType.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.4
Status: current
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-XCVR-MIB 49-17
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrErrorTypeNotification
A wwpLeosPortXcvrErrorTypeNotification is sent if the Xcvr is detected faulted
because of some reason. Reason of failure is specified by
wwpLeosPortXcvrErrorType. The transceiver is identified by the
wwpLeosPortXcvrId variable binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.5
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrTempHighNotification
A wwpLeosPortXcvrTempHighNotification is sent if the Xcvr temperature
exceeds the threshold. The transceiver is identified by the
wwpLeosPortXcvrId variable binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.6
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrTempLowNotification
A wwpLeosPortXcvrTempLowNotification is sent if the Xcvr temperature
decreases the threshold. The transceiver is identified by the
wwpLeosPortXcvrId variable binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.7
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrTempNormalNotification
A wwpLeosPortXcvrTempNormalNotification is sent if the Xcvr temperature
returns back to normal state. The transceiver is identified by the
wwpLeosPortXcvrId variable binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
49-18 WWP-LEOS-PORT-XCVR-MIB
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrVoltageHighNotification
A wwpLeosPortXcvrVoltageHighNotification is sent if the Xcvr voltage
exceeds the threshold. The transceiver is identified by the
wwpLeosPortXcvrId variable binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.9
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrVoltageLowNotification
A wwpLeosPortXcvrVoltageLowNotification is sent if the Xcvr voltage
decreases the threshold. The transceiver is identified by the
wwpLeosPortXcvrId variable binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.10
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrVoltageNormalNotification
A wwpLeosPortXcvrVoltageNormalNotification is sent if the Xcvr voltage
returns back to normal state. The transceiver is identified by the
wwpLeosPortXcvrId variable binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.11
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrBiasHighNotification
A wwpLeosPortXcvrBiasHighNotification is sent if the Xcvr Bias exceeds the
threshold. The transceiver is identified by the wwpLeosPortXcvrId variable
binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.12
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-XCVR-MIB 49-19
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrBiasLowNotification
A wwpLeosPortXcvrBiasLowNotification is sent if the Xcvr voltage decreases
the threshold. The transceiver is identified by the wwpLeosPortXcvrId variable
binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.13
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrBiasNormalNotification
A wwpLeosPortXcvrBiasNormalNotification is sent if the Xcvr Bias returns
back to normal state. The transceiver is identified by the wwpLeosPortXcvrId
variable binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.14
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrTxPowerHighNotification
A wwpLeosPortXcvrTxPowerHighNotification is sent if the Xcvr TxPower
exceeds the threshold. The transceiver is identified by the
wwpLeosPortXcvrId variable binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.15
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrTxPowerLowNotification
A wwpLeosPortXcvrTxPowerLowNotification is sent if the Xcvr voltage
decreases the threshold. The transceiver is identified by the
wwpLeosPortXcvrId variable binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.16
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
49-20 WWP-LEOS-PORT-XCVR-MIB
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrTxPowerNormalNotification
A wwpLeosPortXcvrTxPowerNormalNotification is sent if the Xcvr TxPower
returns back to normal state. The transceiver is identified by the
wwpLeosPortXcvrId variable binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.17
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrRxPowerHighNotification
A wwpLeosPortXcvrRxPowerHighNotification is sent if the Xcvr RxPower
exceeds the threshold. The transceiver is identified by the
wwpLeosPortXcvrId variable binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.18
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrRxPowerLowNotification
A wwpLeosPortXcvrRxPowerLowNotification is sent if the Xcvr voltage
decreases the threshold. The transceiver is identified by the
wwpLeosPortXcvrId variable binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.19
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrRxPowerNormalNotification
A wwpLeosPortXcvrRxPowerNormalNotification is sent if the Xcvr RxPower
returns back to normal state. The transceiver is identified by the
wwpLeosPortXcvrId variable binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.20
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-XCVR-MIB 49-21
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrSpeedInfoMissingNotification
A wwpLeosPortXcvrSpeedInfoMissingNotification is sent if the Xcvr speed
information is not found. The transceiver is identified by the
wwpLeosPortXcvrId variable binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.21
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrBiasHighWarningNotification
A wwpLeosPortXcvrBiasHighNotification is sent if the Xcvr Bias exceeds the
warning threshold. The transceiver is identified by the wwpLeosPortXcvrId
variable binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.22
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrBiasLowWarningNotification
A wwpLeosPortXcvrBiasLowNotification is sent if the Xcvr voltage decreases
below the warning threshold. The transceiver is identified by the
wwpLeosPortXcvrId variable binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.23
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrTempHighWarningNotification
A wwpLeosPortXcvrTempHighNotification is sent if the Xcvr temperature
exceeds the warning threshold. The transceiver is identified by the
wwpLeosPortXcvrId variable binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.24
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
49-22 WWP-LEOS-PORT-XCVR-MIB
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrTempLowWarningNotification
A wwpLeosPortXcvrTempLowNotification is sent if the Xcvr temperature
decreases below the warning threshold. The transceiver is identified by the
wwpLeosPortXcvrId variable binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.25
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrVoltageHighWarningNotification
A wwpLeosPortXcvrVoltageHighNotification is sent if the Xcvr voltage
exceeds the warning threshold. The transceiver is identified by the
wwpLeosPortXcvrId variable binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.26
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrVoltageLowWarningNotification
A wwpLeosPortXcvrVoltageLowNotification is sent if the Xcvr voltage
decreases below the warning threshold. The transceiver is identified by the
wwpLeosPortXcvrId variable binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.27
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrTxPowerHighWarningNotification
A wwpLeosPortXcvrTxPowerHighNotification is sent if the Xcvr TxPower
exceeds the warning threshold. The transceiver is identified by the
wwpLeosPortXcvrId variable binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.28
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-PORT-XCVR-MIB 49-23
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrTxPowerLowWarningNotification
A wwpLeosPortXcvrTxPowerLowNotification is sent if the Xcvr TxPower
decreases below the warning threshold. The transceiver is identified by the
wwpLeosPortXcvrId variable binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.29
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrRxPowerHighWarningNotification
A wwpLeosPortXcvrRxPowerHighNotification is sent if the Xcvr RxPower
exceeds the warning threshold. The transceiver is identified by the
wwpLeosPortXcvrId variable binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.30
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosPortXcvrRxPowerLowWarningNotification
A wwpLeosPortXcvrRxPowerLowNotification is sent if the Xcvr RxPower
decreases below the warning threshold. The transceiver is identified by the
wwpLeosPortXcvrId variable binding.
Object Identifier: 1.3.6.1.4.1.6141.2.60.4.2.0.31
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
MIB Reference
009-3220-011 Standard Revision A
August 2013
50-1
WWP-LEOS-RADIUS-CLIENT-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-RADIUS-CLIENT-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosRadiusAdminState
Description and OID
Status
Setting this object administratively enables/disables the RADIUS client on the current
device.
Access
read-write
1.3.6.1.4.1.6141.2.60.20.1.1.1
wwpLeosRadiusOperState
Description and OID
Status
Access
current
read-only
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.20.1.1.2
wwpLeosRadiusClientTimeout
1.3.6.1.4.1.6141.2.60.20.1.1.3
wwpLeosRadiusClientRetries
Description and OID
Indicates the number of times the RADIUS server should be tried before giving current
up on the server.
read-write
1.3.6.1.4.1.6141.2.60.20.1.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
50-2 WWP-LEOS-RADIUS-CLIENT-MIB
wwpLeosRadiusClientAuthKey
Description and OID
Status
Access
The Auth Key to be used for RADIUS Servers. Retrieving the value of this
object via SNMP returns an empty string for security reasons.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.20.1.1.5
wwpLeosRadiusClientServerTable
Description and OID
Lists the possible RADIUS servers. While creating entry, the following objects current
must be specified wwpLeosRadiusClientServerStatus,
wwpLeosRadiusClientServerAddr. SNMP multiple set operation must be used
to create entry.
not-accessible
1.3.6.1.4.1.6141.2.60.20.1.1.6
wwpLeosRadiusClientServerEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.20.1.1.6.1
wwpLeosRadiusClientServerIndex
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.1
wwpLeosRadiusClientServerAddr
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-RADIUS-CLIENT-MIB 50-3
wwpLeosRadiusClientServerResolvedAddr
Description and OID
Status
Access
current
When wwpLeosRadiusClientServerAddr represents: Host name : The
resolved address will either be IPv4 address or IPv6 address. Ipv4 address :
The resolved address will be the same IPv4 address. Ipv6 address : The
resolved address will be the same IPv6 address. When the resolved address
represents: Ipv4 address : wwpLeosRadiusClientServerResolvedAddr will
represent the resolved IPv4 address.
wwpLeosRadiusClientServerResolvedInetAddr used in conjunction with
wwpLeosRadiusClientServerResolvedInetAddrType will represent the same
Ipv4 address. Iv6 address : wwpLeosRadiusClientServerResolvedAddr will
represent 0.0.0.0. wwpLeosRadiusClientServerResolvedInetAddr used in
conjunction with wwpLeosRadiusClientServerResolvedInetAddrType will
represent the Ipv6 address.
read-only
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.3
wwpLeosRadiusClientServerPriority
Description and OID
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.4
wwpLeosRadiusClientServerAuthPort
Description and OID
The destination UDP port number to which RADIUS messages should be sent. current
The RADIUS server is not used for authentication if this port number is 0.
read-write
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.5
wwpLeosRadiusClientServerRoundTripTime
Description and OID
Status
Access
The time interval (in hundredths of a second) between the most recent Access- current
Reply/Access-Challenge and the Access-Request that matched it from this
RADIUS authentication server.
read-only
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
50-4 WWP-LEOS-RADIUS-CLIENT-MIB
wwpLeosRadiusClientServerAccessRequests
Description and OID
Status
Access
The number of RADIUS Access-Request packets sent to this server. This does current
not include retransmissions.
read-only
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.7
wwpLeosRadiusClientServerAccessRetransmissions
Description and OID
Status
Access
current
read-only
Status
Access
The number of RADIUS Access-Accept packets (valid or invalid) received from current
this server.
read-only
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.8
wwpLeosRadiusClientServerAccessAccepts
Description and OID
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.9
wwpLeosRadiusClientServerAccessRejects
Description and OID
Status
Access
The number of RADIUS Access-Reject packets (valid or invalid) received from current
this server.
read-only
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.10
wwpLeosRadiusClientServerAccessChallenges
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-RADIUS-CLIENT-MIB 50-5
wwpLeosRadiusClientServerMalformedAccessResponses
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.12
wwpLeosRadiusClientServerBadAuthenticators
Description and OID
Status
Access
current
read-only
Status
Access
The number of RADIUS Access-Request packets destined for this server that current
have not yet timed out or received a response. This variable is incremented
when an Access-Request is sent and decremented due to receipt of an
Access-Accept, Access-Reject or Access-Challenge, a timeout or
retransmission.
read-only
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.13
wwpLeosRadiusClientServerPendingRequests
Description and OID
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.14
wwpLeosRadiusClientServerTimeouts
Description and OID
Status
Access
The number of authentication timeouts to this server. After a timeout the client current
may retry to the same server, send to a different server, or give up. A retry to
the same server is counted as a retransmit as well as a timeout. A send to a
different server is counted as a Request as well as a timeout.
read-only
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.15
wwpLeosRadiusClientServerUnknownTypes
Description and OID
Status
Access
The number of RADIUS packets of unknown type which were received from
this server on the authentication port.
current
read-only
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.16
MIB Reference
009-3220-011 Standard Revision A
August 2013
50-6 WWP-LEOS-RADIUS-CLIENT-MIB
wwpLeosRadiusClientServerPacketsDropped
Description and OID
Status
Access
The number of RADIUS packets which were received from this server on the current
authentication port and dropped for some other reason.
read-only
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.17
wwpLeosRadiusClientServerStatus
Description and OID
Status
To create a row in this table, set this object to createAndGo(4). When creating current
entry, the following objects must be specified:
wwpLeosRadiusClientServerStatus, wwpLeosRadiusClientServerAddr.
SNMP multiple set operation must be used to create entry.
To disable a
RADIUS server, set wwpLeosRadiusClientServerStatus object to
'notInService' state.
Access
read-create
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.18
wwpLeosRadiusClientServerApplication
Description and OID
Status
Access
This object specifies how the RADIUS server should be used for
authentication. Whether this RADIUS server should be used for userLogin
authentication, dot1x authentication or both is decided by the value of this
object.
current
read-create
Status
Access
Specifies the resolved IP address type. This OID is used in conjunction with current
wwpLeosRadiusClientServerInetAddrress. When set to : ipv4 :
wwpLeosRadiusClientServerInetAddress should be compliant with
InetAddressIPv4 ipv6 : wwpLeosRadiusClientServerInetAddress should be
compliant with InetAddressIPv6
read-only
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.19
wwpLeosRadiusClientServerResolvedInetAddrType
Description and OID
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.20
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-RADIUS-CLIENT-MIB 50-7
wwpLeosRadiusClientServerResolvedInetAddress
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.21
wwpLeosRadiusClientAuthKeyUnset
Description and OID
Status
Access
read-write
1.3.6.1.4.1.6141.2.60.20.1.1.7
wwpLeosRadiusClientAuthSecretUnset
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.20.1.1.8
wwpLeosRadiusClientSearchType
1.3.6.1.4.1.6141.2.60.20.1.1.10
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
51-1
WWP-LEOS-RAPS-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-RAPS-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosRapsState
Description and OID
Status
Access
current
read-only
Status
Access
Node Id.
current
read-only
Status
Access
This object represents the Ethertype value that is used in B-Tag section of
RAPS encapsulation.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.47.1.1.1.1
wwpLeosRapsNodeId
1.3.6.1.4.1.6141.2.60.47.1.1.1.2
wwpLeosRapsEtherType
1.3.6.1.4.1.6141.2.60.47.1.1.1.3
wwpLeosRapsNumberOfRings
1.3.6.1.4.1.6141.2.60.47.1.1.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
51-2 WWP-LEOS-RAPS-MIB
wwpLeosRapsLogicalRingTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Guard time.
current
read-only
1.3.6.1.4.1.6141.2.60.47.1.2.1
wwpLeosRapsLogicalRingEntry
1.3.6.1.4.1.6141.2.60.47.1.2.1.1
wwpLeosRapsLogicalRingIndex
1.3.6.1.4.1.6141.2.60.47.1.2.1.1.1
wwpLeosRapsLogicalRingName
1.3.6.1.4.1.6141.2.60.47.1.2.1.1.2
wwpLeosRapsLogicalRingId
1.3.6.1.4.1.6141.2.60.47.1.2.1.1.3
wwpLeosRapsLogicalRingGuardTime
1.3.6.1.4.1.6141.2.60.47.1.2.1.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-RAPS-MIB 51-3
wwpLeosRapsLogicalRingWtr
Description and OID
Status
Access
current
read-only
Status
Access
This object shows Wait To Block time configured for this logical ring.
current
read-only
Status
Access
current
read-only
Status
Access
Holdoff time.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.47.1.2.1.1.5
wwpLeosRapsLogicalRingWtb
1.3.6.1.4.1.6141.2.60.47.1.2.1.1.6
wwpLeosRapsLogicalRingWestPortId
1.3.6.1.4.1.6141.2.60.47.1.2.1.1.7
wwpLeosRapsLogicalRingWestHoldOffTime
1.3.6.1.4.1.6141.2.60.47.1.2.1.1.8
wwpLeosRapsLogicalRingWestForce
1.3.6.1.4.1.6141.2.60.47.1.2.1.1.9
wwpLeosRapsLogicalRingWestCfmService
1.3.6.1.4.1.6141.2.60.47.1.2.1.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
51-4 WWP-LEOS-RAPS-MIB
wwpLeosRapsLogicalRingEastPortId
Description and OID
Status
Access
current
read-only
Status
Access
Holdoff time.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.47.1.2.1.1.11
wwpLeosRapsLogicalRingEastHoldOffTime
1.3.6.1.4.1.6141.2.60.47.1.2.1.1.12
wwpLeosRapsLogicalRingEastForce
1.3.6.1.4.1.6141.2.60.47.1.2.1.1.13
wwpLeosRapsLogicalRingEastCfmService
1.3.6.1.4.1.6141.2.60.47.1.2.1.1.14
wwpLeosRapsLogicalRingNumberOfVirtualRings
1.3.6.1.4.1.6141.2.60.47.1.2.1.1.15
wwpLeosRapsVirtualRingTable
1.3.6.1.4.1.6141.2.60.47.1.3.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-RAPS-MIB 51-5
wwpLeosRapsVirtualRingEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.47.1.3.1.1
wwpLeosRapsVirtualRingIndex
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.1
wwpLeosRapsVirtualRingName
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.2
wwpLeosRapsVirtualRingVid
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.3
wwpLeosRapsVirtualRingLogicalRingId
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.4
wwpLeosRapsVirtualRingMel
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
51-6 WWP-LEOS-RAPS-MIB
wwpLeosRapsVirtualRingRevertive
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
This object shows the number of protection switching that has occurred for this current
virtual ring.
read-only
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.6
wwpLeosRapsVirtualRingState
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.7
wwpLeosRapsVirtualRingStatus
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.8
wwpLeosRapsVirtualRingAlarm
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.9
wwpLeosRapsVirtualRingNumOfSwitchOvers
Description and OID
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.10
wwpLeosRapsVirtualRingUptimeFromLastFailure
Description and OID
Status
Access
This object shows the up time from the last failure for this virtual ring.
current
read-only
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-RAPS-MIB 51-7
wwpLeosRapsVirtualRingTotalDownTime
Description and OID
Status
Access
This object shows the total down time for this virtual ring.
current
read-only
Status
Access
This object shows RPL ownership for the virtual ring's west link.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.12
wwpLeosRapsVirtualRingWestPortRpl
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.13
wwpLeosRapsVirtualRingWestPortState
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.14
wwpLeosRapsVirtualRingWestPortStatus
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.15
wwpLeosRapsVirtualRingWestPortNrRxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.16
wwpLeosRapsVirtualRingWestPortNrTxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.17
MIB Reference
009-3220-011 Standard Revision A
August 2013
51-8 WWP-LEOS-RAPS-MIB
wwpLeosRapsVirtualRingWestPortSfRxd
Description and OID
Status
Access
This object shows number of Signal Failures received on the west link.
current
read-only
Status
Access
This object shows number of Signal Failures transmitted on the west link.
current
read-only
Status
Access
This object shows number of Force Switch received on the west link.
current
read-only
Status
Access
This object shows number of Force Switch transmitted on the west link.
current
read-only
Status
Access
This object shows number of No Request RPL Blocked received on the west current
link.
read-only
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.18
wwpLeosRapsVirtualRingWestPortSfTxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.19
wwpLeosRapsVirtualRingWestPortFsRxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.20
wwpLeosRapsVirtualRingWestPortFsTxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.21
wwpLeosRapsVirtualRingWestPortNrRbRxd
Description and OID
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.22
wwpLeosRapsVirtualRingWestPortNrRbTxd
Description and OID
Status
Access
This object shows number of No Request RPL Blocked transmitted on the west current
link.
read-only
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.23
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-RAPS-MIB 51-9
wwpLeosRapsVirtualRingEastPortRpl
Description and OID
Status
Access
This object shows RPL ownership for the virtual ring's east link.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
This object shows number of Signal Failures received on the east link.
current
read-only
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.24
wwpLeosRapsVirtualRingEastPortState
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.25
wwpLeosRapsVirtualRingEastPortStatus
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.26
wwpLeosRapsVirtualRingEastPortNrRxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.27
wwpLeosRapsVirtualRingEastPortNrTxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.28
wwpLeosRapsVirtualRingEastPortSfRxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.29
MIB Reference
009-3220-011 Standard Revision A
August 2013
51-10 WWP-LEOS-RAPS-MIB
wwpLeosRapsVirtualRingEastPortSfTxd
Description and OID
Status
Access
This object shows number of Signal Failures transmitted on the east link.
current
read-only
Status
Access
This object shows number of Force Switch received on the east link.
current
read-only
Status
Access
This object shows number of Force Switch transmitted on the east link.
current
read-only
Status
Access
This object shows number of No Request RPL Blocked received on the east
link.
current
read-only
Status
Access
This object shows number of No Request RPL Blocked transmitted on the east current
link.
read-only
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.30
wwpLeosRapsVirtualRingEastPortFsRxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.31
wwpLeosRapsVirtualRingEastPortFsTxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.32
wwpLeosRapsVirtualRingEastPortNrRbRxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.33
wwpLeosRapsVirtualRingEastPortNrRbTxd
Description and OID
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.34
wwpLeosRapsVirtualRingType
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.35
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-RAPS-MIB 51-11
wwpLeosRapsVirtualRingSubRingPortTerm
Description and OID
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.36
wwpLeosRapsVirtualRingMemberTable
1.3.6.1.4.1.6141.2.60.47.1.4.1
wwpLeosRapsVirtualRingMemberEntry
1.3.6.1.4.1.6141.2.60.47.1.4.1.1
wwpLeosRapsVirtualRingMemberVlanId
1.3.6.1.4.1.6141.2.60.47.1.4.1.1.2
wwpLeosRapsVirtualRingMemberVsTable
1.3.6.1.4.1.6141.2.60.47.1.4.2
wwpLeosRapsVirtualRingMemberVsEntry
1.3.6.1.4.1.6141.2.60.47.1.4.2.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
51-12 WWP-LEOS-RAPS-MIB
wwpLeosRapsVirtualRingMemberVsId
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.47.1.4.2.1.1
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
wwpLeosRapsAlarm
A alarm notification is sent when a ring detects Provisioning-Mismatch,
Protection-Switch-Active or when the condition clears. Variable bindings
include: wwpLeosRapsVirtualRingName and
wwpLeosRapsVirtualRingAlarm.
Object Identifier: 1.3.6.1.4.1.6141.2.60.47.2.0.1
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
MIB Reference
009-3220-011 Standard Revision A
August 2013
52-1
WWP-LEOS-RMON-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-RMON-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosRmonFileTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.41.1.1.1
wwpLeosRmonFileEntry
1.3.6.1.4.1.6141.2.60.41.1.1.1.1
wwpLeosRmonFileIndex
1.3.6.1.4.1.6141.2.60.41.1.1.1.1.1
wwpLeosRmonFileName
1.3.6.1.4.1.6141.2.60.41.1.1.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
52-2 WWP-LEOS-RMON-MIB
wwpLeosRmonFileRemoteDir
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
The name and location on the remote server of the last file.
current
read-only
1.3.6.1.4.1.6141.2.60.41.1.1.1.1.3
wwpLeosRmonFileServer
1.3.6.1.4.1.6141.2.60.41.1.1.1.1.4
wwpLeosRmonFileInterval
1.3.6.1.4.1.6141.2.60.41.1.1.1.1.5
wwpLeosRmonFilePushLastFile
1.3.6.1.4.1.6141.2.60.41.1.1.1.1.6
wwpLeosRmonFileState
1.3.6.1.4.1.6141.2.60.41.1.1.1.1.7
wwpLeosRmonFileLastRemoteName
1.3.6.1.4.1.6141.2.60.41.1.1.1.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-RMON-MIB 52-3
wwpLeosRmonFileLastPushTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-write
Status
Access
Only 1 file is supported on LEOS 4.x devices and the 3902, 3911 and 3920.
current
read-only
Status
Access
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.41.1.1.1.1.9
wwpLeosRmonFileLastPushStatus
1.3.6.1.4.1.6141.2.60.41.1.1.1.1.10
wwpLeosRmonFileUserFilesKept
1.3.6.1.4.1.6141.2.60.41.1.1.1.1.11
wwpLeosRmonFileMaxFiles
1.3.6.1.4.1.6141.2.60.41.1.1.1.1.12
wwpLeosRmonFileXftpTransferMode
1.3.6.1.4.1.6141.2.60.41.1.1.1.1.13
wwpLeosRmonFileXftpLoginId
1.3.6.1.4.1.6141.2.60.41.1.1.1.1.14
MIB Reference
009-3220-011 Standard Revision A
August 2013
52-4 WWP-LEOS-RMON-MIB
wwpLeosRmonFileXftpPassword
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.41.1.1.1.1.15
wwpLeosRmonFileXftpSecret
1.3.6.1.4.1.6141.2.60.41.1.1.1.1.16
wwpLeosRmonHistoryTable
1.3.6.1.4.1.6141.2.60.41.1.1.2
wwpLeosRmonHistoryEntry
1.3.6.1.4.1.6141.2.60.41.1.1.2.1
wwpLeosRmonHistoryIndex
1.3.6.1.4.1.6141.2.60.41.1.1.2.1.1
wwpLeosRmonHistoryAutoConfig
1.3.6.1.4.1.6141.2.60.41.1.1.2.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-RMON-MIB 52-5
wwpLeosRmonHistoryFileLogging
Description and OID
Status
File logging setting to use when creating the next autogenerated etherHistory current
entry.
Access
read-write
1.3.6.1.4.1.6141.2.60.41.1.1.2.1.3
wwpLeosRmonHistoryInterval
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
The owner to use when creating the next autogenerated etherHistory entry.
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.41.1.1.2.1.4
wwpLeosRmonHistoryNumBuckets
1.3.6.1.4.1.6141.2.60.41.1.1.2.1.5
wwpLeosRmonHistoryOwner
1.3.6.1.4.1.6141.2.60.41.1.1.2.1.6
wwpLeosRmonHistoryStatistics
1.3.6.1.4.1.6141.2.60.41.1.1.2.1.7
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
53-1
WWP-LEOS-RSTP-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-RSTP-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosRstpMode
Description and OID
Status
This object sets the mode to rstp, domain, or mstp. If the selected mode is not current
supported by the device, an SNMP error is returned and the value of this object
remains unchanged.
Access
read-write
1.3.6.1.4.1.6141.2.60.13.1.1.1
wwpLeosRstpDomainTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.13.1.1.2
wwpLeosRstpDomainEntry
1.3.6.1.4.1.6141.2.60.13.1.1.2.1
wwpLeosRstpDomainId
1.3.6.1.4.1.6141.2.60.13.1.1.2.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
53-2 WWP-LEOS-RSTP-MIB
wwpLeosRstpDomainName
Description and OID
Status
Access
current
read-create
Status
Access
To create a row in this table, set this object to 'createAndGo'. To delete the
entry set it to delete.
current
read-create
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
Port ID for the instance. Port ID's start at 1, and may not be consecutive for
each additional port. This port Id should refer to the dot1dBasePort in the
Dot1dBasePortEntry.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.13.1.1.2.1.2
wwpLeosRstpDomainStatus
1.3.6.1.4.1.6141.2.60.13.1.1.2.1.3
wwpLeosRstpDomainMemTable
1.3.6.1.4.1.6141.2.60.13.1.1.3
wwpLeosRstpDomainMemEntry
1.3.6.1.4.1.6141.2.60.13.1.1.3.1
wwpLeosRstpDomainPortId
1.3.6.1.4.1.6141.2.60.13.1.1.3.1.1
wwpLeosRstpDomainMemStatus
Description and OID
To add a port to the domain create a row in this table, by setting this object to current
'createAndGo'. To remove the port from the domain set this object to delete.
read-create
1.3.6.1.4.1.6141.2.60.13.1.1.3.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-RSTP-MIB 53-3
wwpLeosRstpDomainAttrsForceVer
Description and OID
Status
Access
current
read-only
Status
Access
current
read-write
Status
Access
This attribute specifies the hello time for the RSTP domain.
current
read-write
Status
Access
current
read-write
Status
Access
This object specifies the max age time for the RSTP domain.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.13.1.1.4.1
wwpLeosRstpDomainAttrsForwardDelay
1.3.6.1.4.1.6141.2.60.13.1.1.4.2
wwpLeosRstpDomainAttrsHelloTime
1.3.6.1.4.1.6141.2.60.13.1.1.4.3
wwpLeosRstpDomainAttrsLoopBackBlock
1.3.6.1.4.1.6141.2.60.13.1.1.4.4
wwpLeosRstpDomainAttrsMaxAge
1.3.6.1.4.1.6141.2.60.13.1.1.4.5
wwpLeosRstpDomainAttrsPathCostDef
Description and OID
This object specifies the path cost. If set to 1 then it is 8021d, else it is 8021t. current
read-write
1.3.6.1.4.1.6141.2.60.13.1.1.4.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
53-4 WWP-LEOS-RSTP-MIB
wwpLeosRstpDomainAttrsPriority
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This attribute specifies the designated bridge priority for specified domain. This current
attribute represents the first two octets of the (8 octet long) designated bridge
ID. The writable portion of these two octets is the first 3 bits starting from the
least significant bit.
read-only
1.3.6.1.4.1.6141.2.60.13.1.1.4.7
wwpLeosRstpDomainAttrsTxHoldCount
1.3.6.1.4.1.6141.2.60.13.1.1.4.8
wwpLeosRstpDomainAttrTable
1.3.6.1.4.1.6141.2.60.13.1.1.5
wwpLeosRstpDomainAttrEntry
1.3.6.1.4.1.6141.2.60.13.1.1.5.1
wwpLeosRstpDomainAttrDesignatedBridgePri
Description and OID
1.3.6.1.4.1.6141.2.60.13.1.1.5.1.1
wwpLeosRstpDomainAttrDesignatedBridgeMac
Description and OID
Status
Access
This attribute specifies the designated bridge MAC address for specified
domain.
current
read-only
1.3.6.1.4.1.6141.2.60.13.1.1.5.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-RSTP-MIB 53-5
wwpLeosRstpDomainAttrDesignatedRootPri
Description and OID
Status
Access
This attribute specifies the designated root priority for specified domain. This current
attribute represents the first two octets of the (8 octet long) designated root
bridge ID. The writable portion of these two octets is the first 3 bits starting from
the least significant bit.
read-only
1.3.6.1.4.1.6141.2.60.13.1.1.5.1.3
wwpLeosRstpDomainAttrDesignatedRootMac
Description and OID
Status
Access
This attribute specifies the designated root mac address for specified domain. current
read-only
1.3.6.1.4.1.6141.2.60.13.1.1.5.1.4
wwpLeosRstpDomainAttrRootCost
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.13.1.1.5.1.5
wwpLeosRstpDomainAttrRootPort
1.3.6.1.4.1.6141.2.60.13.1.1.5.1.6
wwpLeosRstpDomainAttrMaxAge
1.3.6.1.4.1.6141.2.60.13.1.1.5.1.7
wwpLeosRstpDomainAttrHelloTime
1.3.6.1.4.1.6141.2.60.13.1.1.5.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
53-6 WWP-LEOS-RSTP-MIB
wwpLeosRstpDomainAttrHoldTime
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-write
Status
Access
This object defines how often the events relating to Max Age BPDUs being
sent or received are generated. It is the number of seconds that must pass
between events.
current
read-write
Status
Access
Table that contains additional information about each port. This table is an
extension of dot1dStpPortTable.
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.13.1.1.5.1.9
wwpLeosRstpDomainAttrForwardDelay
1.3.6.1.4.1.6141.2.60.13.1.1.5.1.10
wwpLeosRstpDomainAttrPriority
1.3.6.1.4.1.6141.2.60.13.1.1.5.1.11
wwpLeosRstpMaxAgeEventInterval
1.3.6.1.4.1.6141.2.60.13.1.1.6
wwpLeosRstpPortInfoTable
1.3.6.1.4.1.6141.2.60.13.1.2.1
wwpLeosRstpPortInfoEntry
1.3.6.1.4.1.6141.2.60.13.1.2.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-RSTP-MIB 53-7
wwpLeosRstpPortId
Description and OID
Status
Access
This is the port num used as index in the table. Value of this port id is same as current
dot1dStpPort.
read-only
1.3.6.1.4.1.6141.2.60.13.1.2.1.1.1
wwpLeosRstpPortDesiginatedId
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Table that contains additional local information about each port. This table is
also an extension of the dot1dStpPortTable.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This attribute enable | disable dynamic path cost for the given port. Before
setting dot1dStpPortPathCost user must set
wwpLeosRstpPortDynPathCostState to disabled.
current
read-write
1.3.6.1.4.1.6141.2.60.13.1.2.1.1.2
wwpLeosRstpPortDesiginatedPid
1.3.6.1.4.1.6141.2.60.13.1.2.1.1.3
wwpLeosRstpLocalPortInfoTable
1.3.6.1.4.1.6141.2.60.13.1.3.1
wwpLeosRstpLocalPortInfoEntry
1.3.6.1.4.1.6141.2.60.13.1.3.1.1
wwpLeosRstpPortDynPathCostState
1.3.6.1.4.1.6141.2.60.13.1.3.1.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
53-8 WWP-LEOS-RSTP-MIB
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
wwpLeosRstpPortBackupNotification
A wwpLeosRstpPortBackupNotification is sent whenever device detects self
loop i.e. same cable connected to two ports on the same device. Variable
bindings include: dot1dStpPort.
Object Identifier: 1.3.6.1.4.1.6141.2.60.13.2.0.1
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosRstpPvstBpduReceivedNotification
A wwpLeosRstpPvstBpduReceivedNotification is sent whenever PVST
BPDU is received on the port. This trap is sent out every minute. Variable
bindings include: dot1dStpPort.
Object Identifier: 1.3.6.1.4.1.6141.2.60.13.2.0.2
Status: deprecated
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosRstpSelfLoopNotification
A wwpLeosRstpSelfLoopNotification is sent whenever device detects same
cable connected to a port in a loop back. Also if loop-back blocking is enabled
on the device then RSTP will block this port (self disable). Variable bindings
include: dot1dStpPort.
Object Identifier: 1.3.6.1.4.1.6141.2.60.13.2.0.3
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosRstpPortOperEdgeNotification
A wwpLeosRstpPortOperEdgeNotification trap is sent whenever device
detects a port Rstp OperEdge change. Variable bindings include:
dot1dStpPort.
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-RSTP-MIB 53-9
wwpLeosRstpPortFlapNotification
A wwpLeosRstpPortFlapNotification trap is sent whenever device detects a
port flapping. Trap is generated under following criteria. If device detects port
flapped more than once within 1 minute timer period and it has not sent trap
within last 5 minutes then it will generate this trap. Variable bindings include:
dot1dStpPort.
Object Identifier: 1.3.6.1.4.1.6141.2.60.13.2.0.5
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosRstpBridgeRootPortLostNotification
A wwpLeosRstpBridgeRootPortLostNotification trap is sent whenever device
detects that bridge root port is lost. This trap will indicate either the link failure
or link partner RSTP disabled. Variable bindings include: dot1dStpPort.
Object Identifier: 1.3.6.1.4.1.6141.2.60.13.2.0.6
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
MIB Reference
009-3220-011 Standard Revision A
August 2013
54-1
WWP-LEOS-RSVPTE-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-RSVPTE-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosRsvpteAdminStatus
Description and OID
Status
Access
current
read-write
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.30.1.1.1
wwpLeosRsvpteOperStatus
1.3.6.1.4.1.6141.2.60.30.1.1.2
wwpLeosRsvpteRetryInterval
Description and OID
The persistent tunnel retry interval. This is the interval between the first failure current
of a persistent tunnel and the first attempt to re-establish the tunnel. This
cannot be changed while the administrative status is 'enabled' or the
opererational status is 'up'.
read-write
1.3.6.1.4.1.6141.2.60.30.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
54-2 WWP-LEOS-RSVPTE-MIB
wwpLeosRsvpteRetryInfiniteState
Description and OID
Status
Access
The persistent tunnel retry infinity. This is the state which when on triggers
RSVP-TE to try for an infinite number of times to restore the tunnels. This
object can only be set if RSVP-TE is globally disabled.
current
read-write
Status
Access
current
The maximum number of retry attempts that are made before a persistent
tunnel is deemed inoperable. Once in this state, a management agent should
set mplsTunnelAdminStatus to 'up' to attempt to reestablish the tunnel. This
field is not used when wwpLeosRsvpteRetryInfiniteState is on
read-only
1.3.6.1.4.1.6141.2.60.30.1.1.4
wwpLeosRsvpteRetryMax
Description and OID
1.3.6.1.4.1.6141.2.60.30.1.1.5
wwpLeosRsvpteRefreshInterval
Description and OID
Status
Access
This object is the RSVP-TE value, R, used to set the average interval between current
refresh path and RESV messages.
read-only
1.3.6.1.4.1.6141.2.60.30.1.1.6
wwpLeosRsvpteRefreshMultiple
Description and OID
Status
Access
This object is the RSVP-TE value, K, which is the number of unresponded Path current
or RESV refresh attempts that must be made, spaced by the refresh interval,
before the state is deemed to have timed out.
read-only
1.3.6.1.4.1.6141.2.60.30.1.1.7
wwpLeosRsvpteRfrshSlewDenom
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.30.1.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-RSVPTE-MIB 54-3
wwpLeosRsvpteRfrshSlewNumerator
Description and OID
Status
Access
current
read-only
Status
Access
The RSVP-TE value, Kb, which is the number of refresh timeout periods after current
which blockade state is deleted.
read-only
1.3.6.1.4.1.6141.2.60.30.1.1.9
wwpLeosRsvpteBlockadeMultiple
Description and OID
1.3.6.1.4.1.6141.2.60.30.1.1.10
wwpLeosRsvpteLSPSetupPriority
Description and OID
Status
Access
current
The setup priority to apply to LSPs that are not signalling this parameter. 0
represents the highest priority, 7 the lowest. The value of this object must be
numerically more or equal (therefore, of lower or equal priority) than the value
of the holding priority object.
read-only
1.3.6.1.4.1.6141.2.60.30.1.1.11
wwpLeosRsvpteLSPHoldingPriority
Description and OID
Status
Access
The holding priority to apply to LSPs that are not signalling this parameter. 0 current
represents the highest priority, 7 the lowest. The value of this object must be
numerically less or equal (therefore, higher or equal priority) than the value of
the holding priority object.
read-only
1.3.6.1.4.1.6141.2.60.30.1.1.12
wwpLeosRsvpteUseHopByHop
Description and OID
Status
Access
A flag to indicate that RSVP-TE should use the hop by hop addressing scheme current
for the PATH and PATH-TEAR messages it sends. If set, the IP addresses
used in the IP header of PATH messages forwarded by RSVP-TE set source
as the local outgoing interface IP address, and destination as the next hop
router IP address.
read-only
1.3.6.1.4.1.6141.2.60.30.1.1.13
MIB Reference
009-3220-011 Standard Revision A
August 2013
54-4 WWP-LEOS-RSVPTE-MIB
wwpLeosRsvpteRestartCapable
Description and OID
Status
Access
A flag to indicate whether the local node should advertise itself as restart
capable.
current
read-only
Status
Access
The time in milliseconds that the local node takes to restart RSVP-TE and the current
communication channel used for RSVP-TE communication. This is advertised
to neighbors in the Restart_Cap object in Hello messages. Only used if
wwpLeosRsvpteRestartCapable is set to true.
read-only
1.3.6.1.4.1.6141.2.60.30.1.1.14
wwpLeosRsvpteRestartTime
Description and OID
1.3.6.1.4.1.6141.2.60.30.1.1.15
wwpLeosRsvpteRecoveryTime
Description and OID
Status
Access
The period of time in milliseconds that the local node recommends neighbors current
to take to resynchronize RSVP-TE and MPLS forwarding information after the
re-establishment of Hello connectivity. This is advertised to neighbors in the
Restart_Cap object in Hello messages. A value of zero indicates that the node
does not support resynchronization following failure of the local node. A value
of 0xFFFFFFFF indicates an infinite recovery time. Only used if
wwpLeosRsvpteRestartCapable is set to true.
read-only
1.3.6.1.4.1.6141.2.60.30.1.1.16
wwpLeosRsvpteMinPeerRestart
Description and OID
Status
Access
The minimum period of time in milliseconds that RSVP-TE should wait for a current
restart capable neighbor to regain Hello connectivity before invoking
procedures related to communication loss. RSVP-TE waits for the maximum
of either this time or the restart_time advertised in the RESTART_CAP object
in Hello messages from the neighbor.
read-only
1.3.6.1.4.1.6141.2.60.30.1.1.17
wwpLeosRsvpteIfTable
Description and OID
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.30.1.2.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-RSVPTE-MIB 54-5
wwpLeosRsvpteIfEntry
Description and OID
Status
Access
WWP Descr.
current
not-accessible
Status
Access
Interface Name
current
read-only
Status
Access
Interface Index
current
not-accessible
Status
Access
Interface IP Address
current
read-only
Status
Access
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.30.1.2.1.1
wwpLeosRsvpteIfName
1.3.6.1.4.1.6141.2.60.30.1.2.1.1.1
wwpLeosRsvpteIfIndex
1.3.6.1.4.1.6141.2.60.30.1.2.1.1.2
wwpLeosRsvpteIfIpAddr
1.3.6.1.4.1.6141.2.60.30.1.2.1.1.3
wwpLeosRsvpteIfMtu
1.3.6.1.4.1.6141.2.60.30.1.2.1.1.4
wwpLeosRsvpteIfAdminStatus
1.3.6.1.4.1.6141.2.60.30.1.2.1.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
54-6 WWP-LEOS-RSVPTE-MIB
wwpLeosRsvpteIfOperStatus
Description and OID
Status
Access
current
read-only
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.30.1.2.1.1.6
wwpLeosRsvpteIfHelloInterval
1.3.6.1.4.1.6141.2.60.30.1.2.1.1.7
wwpLeosRsvpteIfHelloTolerance
Description and OID
RSVP-TE hello tolerance defines number of hello interval which may pass
current
without receiving a successful Hello message from a partner before the Hello
session times out.
read-write
1.3.6.1.4.1.6141.2.60.30.1.2.1.1.8
wwpLeosRsvpteIfAdvertisedLabel
Description and OID
Status
This attribute decides what kind of a Label will be advertised by RSVP-TE for current
a Label Request received on this L3 Interface
Access
read-write
1.3.6.1.4.1.6141.2.60.30.1.2.1.1.9
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
55-1
WWP-LEOS-SSH-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-SSH-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosSSHServerAdminState
Description and OID
Status
Access
This object indicates the global administrative state of the SSH server.
current
read-write
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.34.1.1.1
wwpLeosSSHServerOperState
1.3.6.1.4.1.6141.2.60.34.1.1.2
wwpLeosSSHServerAuthenticationRetries
Description and OID
This object indicates the number of retries the SSH server should allow before current
rejecting the client request.
read-write
1.3.6.1.4.1.6141.2.60.34.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
55-2 WWP-LEOS-SSH-MIB
wwpLeosSSHServerMaxClients
Description and OID
Status
Access
This object indicates the maximum number of client sessions the SSH server current
accepts at any given time. The current number of limited, admin and super
users must never exceed the value indicated by
wwpLeosSSHServerMaxClients.
read-only
1.3.6.1.4.1.6141.2.60.34.1.1.4
wwpLeosSSHServerKeyGenerateSet
Description and OID
Status
Setting this object triggers the device to generate a key. If the user optionally current
wants the public key to be TFTP'd to some address then
wwpLeosSSHServerTftpServer must be set to a valid TFTP server.
Access
read-write
1.3.6.1.4.1.6141.2.60.34.1.1.5
wwpLeosSSHServerKey
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.34.1.1.6
wwpLeosSSHServerKeyStatus
1.3.6.1.4.1.6141.2.60.34.1.1.7
wwpLeosSSHServerTftpServer
Description and OID
current
This object indicates the TFTP server where the public key is optionally
transmitted. Once this object is set, the device always uses this IP address
whenever wwpLeosSSHServerKeyGenerateSet is set to true. The user must
set this to 0 if the user does not want the device to TFTP the public key. If key
generation and TFTP server is not configured through SNMP then this object
always shows 0.0.0.0.
read-write
1.3.6.1.4.1.6141.2.60.34.1.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-SSH-MIB 55-3
wwpLeosSSHServerMaxLimitedUsers
Description and OID
Status
Access
This object indicates the maximum number of limited users SSH server
accepts at any given time.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.34.1.1.9
wwpLeosSSHServerMaxSuperUsers
Description and OID
This object indicates the maximum number of super users SSH server accepts current
at any given time.
read-write
1.3.6.1.4.1.6141.2.60.34.1.1.10
wwpLeosSSHServerMaxAdminUsers
Description and OID
Status
Access
This object indicates the maximum number of admin users SSH server
accepts at any given time.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.34.1.1.11
wwpLeosSSHServerClientTable
Description and OID
current
The (conceptual) table listing the SSH server clients configured. To create
entry in this table use SNMP multiple variable binding option.
wwpLeosSSHServerClientIpAddr must be set to some valid IP.
wwpLeosSSHServerClientStatus must be set to createAndGo. To delete entry
in this table wwpLeosSSHServerClientStatus must be set to destroy.
not-accessible
1.3.6.1.4.1.6141.2.60.34.1.2.1
wwpLeosSSHServerClientEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.34.1.2.1.1
wwpLeosSSHServerClientIndex
1.3.6.1.4.1.6141.2.60.34.1.2.1.1.1
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
55-4 WWP-LEOS-SSH-MIB
wwpLeosSSHServerClientIpAddr
Description and OID
Status
current
This object indicates the IP address of the client that is allowed to connect
using SSH. This object cannot be modified once entry is created with some IP.
Returns 0.0.0.0 when not representing IPv4 address.
Access
read-create
1.3.6.1.4.1.6141.2.60.34.1.2.1.1.2
wwpLeosSSHServerClientStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete the
entry set this to 'destroy'.
Access
read-create
1.3.6.1.4.1.6141.2.60.34.1.2.1.1.3
wwpLeosSSHServerClientInetAddrType
Description and OID
Status
current
This object indicates the IP address of the client that is allowed to connect
using SSH. This object cannot be modified once entry is created with some
IP. Used in conjunction with wwpLeosSSHServerClientInetAddr. When value
is : ipv4 : wwpLeosSSHServerClientInetAddr should be compliant with
InetAddressIPv4 ipv6 : wwpLeosSSHServerClientInetAddr should be
compliant with InetAddressIPv6.
Access
read-create
1.3.6.1.4.1.6141.2.60.34.1.2.1.1.4
wwpLeosSSHServerClientInetAddr
Description and OID
Status
current
This object indicates the IP address of the client that is allowed to connect
using SSH. This object cannot be modified once entry is created with some IP.
This OID should be used in conjunction with
wwpLeosSSHServerClientInetAddrType.
Access
read-create
1.3.6.1.4.1.6141.2.60.34.1.2.1.1.5
wwpLeosSSHServerListenerPortId
Description and OID
Status
This object indicates the port number on which SSH server is allowed to listen current
for clients.
Access
read-write
1.3.6.1.4.1.6141.2.60.34.1.3.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-SSH-MIB 55-5
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
56-1
WWP-LEOS-SW-XGRADE-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-SW-XGRADE-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosSwDownloadServerAddrType
Description and OID
Status
deprecated
Specifies the wwpLeosSwDownloadServerAddr type. It can be set to 1 for
IPV4 type addresses or can be set to 16 for host name. This MIB object is not
supported. Any operation on this MIB object will fail.
Access
read-write
1.3.6.1.4.1.6141.2.60.10.1.1.1.1
wwpLeosSwDownloadServerAddr
Description and OID
Status
The IP address of the TFTP server or the host name from which the software deprecated
package should be downloaded. Address must be a unicast address or host
name that is reachable from the agent and no firewalls/acls preventing TFTP
datagrams from being transferred. This MIB object is not supported. Any
operation on this MIB object will fail.
Access
read-write
1.3.6.1.4.1.6141.2.60.10.1.1.1.2
wwpLeosSwDownloadPackageName
Description and OID
Status
The package name (including the path, if applicable) to be retrieved from the deprecated
TFTP server. Length of package string must not exceed 128 alpha-numeric
characters, no spaces in filenames. This MIB object is not supported. Any
operation on this MIB object will fail.
Access
read-write
1.3.6.1.4.1.6141.2.60.10.1.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
56-1
WWP-LEOS-SW-XGRADE-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-SW-XGRADE-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosSwDownloadServerAddrType
Description and OID
Status
Access
read-write
1.3.6.1.4.1.6141.2.60.10.1.1.1.1
wwpLeosSwDownloadServerAddr
Description and OID
Status
The IP address of the TFTP server or the host name from which the software deprecated
package should be downloaded. Address must be a unicast address or host
name that is reachable from the agent and no firewalls/acls preventing TFTP
datagrams from being transferred. This MIB object is not supported. Any
operation on this MIB object will fail.
Access
read-write
1.3.6.1.4.1.6141.2.60.10.1.1.1.2
wwpLeosSwDownloadPackageName
Description and OID
Status
The package name (including the path, if applicable) to be retrieved from the deprecated
TFTP server. Length of package string must not exceed 128 alpha-numeric
characters, no spaces in filenames. This MIB object is not supported. Any
operation on this MIB object will fail.
Access
read-write
1.3.6.1.4.1.6141.2.60.10.1.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
56-2 WWP-LEOS-SW-XGRADE-MIB
wwpLeosSwDownLoadActivate
Description and OID
Status
Access
Activate the software download operation with a value of True(1). The object
returns to 'false' once the software download is completed. Poll
wwpLeosSwDownloadStatus for current status. Default value is False.
WwpSwDownLoadServerAddr and wwpLeosSwDownloadPackageName
must be valid prior to setting this object to True. The management station is
not able to set this object to 'true' if the package name does not follow the
correct syntax (i.e. wwp/cmd/pmf-1.0.gz). This MIB object is not supported.
Any operation on this MIB object will fail.
deprecated
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.10.1.1.1.4
wwpLeosSwDownloadNotifOnCompletion
Description and OID
read-write
1.3.6.1.4.1.6141.2.60.10.1.1.1.5
wwpLeosSwDownloadStatus
Description and OID
Status
Specifies the state of this package download request. If no package download deprecated
request is being processed, the wwpLeosSwDownloadStatus should be 'idle'.
This MIB object is not supported. Any operation on this MIB object will fail.
Access
read-only
1.3.6.1.4.1.6141.2.60.10.1.1.1.6
wwpLeosSwDownloadFailCause
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.10.1.1.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-SW-XGRADE-MIB 56-3
wwpLeosSwDownloadNotificationInfo
Description and OID
Status
Access
The string explaining the error code in detail or the additional info for the
software download completion. This MIB object is not supported. Any
operation on this MIB object will fail.
deprecated
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This object indicates the unique ID for the blade. The ID zero is reserved for
chassis and the corresponding Xgrade entry is applied to all the blades.
current
read-only
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.10.1.1.1.8
wwpLeosSwXgradeBladeTable
1.3.6.1.4.1.6141.2.60.10.1.1.2
wwpLeosSwXgradeBladeEntry
1.3.6.1.4.1.6141.2.60.10.1.1.2.1
wwpLeosSwXgradeBladeId
1.3.6.1.4.1.6141.2.60.10.1.1.2.1.1
wwpLeosSwXgradePackage
1.3.6.1.4.1.6141.2.60.10.1.1.2.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
56-4 WWP-LEOS-SW-XGRADE-MIB
wwpLeosSwXgradeOp
Description and OID
Status
Access
current
read-write
Status
Access
Specifies the wwpLeosSwXgradeTftpAddr type. It can be set to 1 for IPv4 type current
addresses or to 16 for host name.
read-write
1.3.6.1.4.1.6141.2.60.10.1.1.2.1.4
wwpLeosSwXgradeTftpAddr
Description and OID
Status
The IP address of the TFTP server or the host name from which the software current
package should be downloaded. This is optional. Address must be a unicast
address or host name that is reachable from the agent and no firewalls/acls
preventing TFTP datagrams from being transferred.
Access
read-write
1.3.6.1.4.1.6141.2.60.10.1.1.2.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-SW-XGRADE-MIB 56-5
wwpLeosSwXgradeOpActivate
Description and OID
Status
Access
Setting this object to 'true' activates the Xgrade operation for the blade.
current
read-write
Status
Access
current
read-only
Status
Access
Specifies the path for the package. If this object is set, the device prepends
the package name specified by wwpLeosSwXgradePackage object with
wwpLeosSwXgradePackagePath. To reset this object set it to 0.
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.10.1.1.2.1.6
wwpLeosSwXgradeOpStatus
1.3.6.1.4.1.6141.2.60.10.1.1.2.1.7
wwpLeosSwXgradePackagePath
1.3.6.1.4.1.6141.2.60.10.1.1.2.1.8
wwpLeosSwXgradeTransferMode
1.3.6.1.4.1.6141.2.60.10.1.1.2.1.9
wwpLeosSwXgradeLoginId
1.3.6.1.4.1.6141.2.60.10.1.1.2.1.10
wwpLeosSwXgradePassword
1.3.6.1.4.1.6141.2.60.10.1.1.2.1.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
56-6 WWP-LEOS-SW-XGRADE-MIB
wwpLeosSwXgradeSecret
Description and OID
Status
Access
current
read-write
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.10.1.1.2.1.12
wwpLeosBladePackageInfoTable
1.3.6.1.4.1.6141.2.60.10.1.1.3
wwpLeosBladePackageInfoEntry
1.3.6.1.4.1.6141.2.60.10.1.1.3.1
wwpLeosBladeInstPackageVer
1.3.6.1.4.1.6141.2.60.10.1.1.3.1.1
wwpLeosBladeRunPackageVer
1.3.6.1.4.1.6141.2.60.10.1.1.3.1.2
wwpLeosBladeDnldPackageVer
1.3.6.1.4.1.6141.2.60.10.1.1.3.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-SW-XGRADE-MIB 56-7
wwpLeosBladeInstPackageRlsStatus
Description and OID
Status
Access
current
read-only
Status
Access
This MIB object shows the MIB version currently supported by the device.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.10.1.1.3.1.4
wwpLeosSwMIBVersion
1.3.6.1.4.1.6141.2.60.10.1.1.4.1
wwpLeosSwXgradeDestPath
Description and OID
This object is used to specify the destination path where file is transferred to current
from the TFTP server. Length of destination string must not exceed 128 alphanumeric characters, no spaces in filenames.
read-write
1.3.6.1.4.1.6141.2.60.10.1.1.4.2
wwpLeosSwXgradePackagePathName
Description and OID
Status
This object is used to specify the path for the package to be retrieved from the current
TFTP server. Length of package path string must not exceed 128 alphanumeric characters, no spaces in filenames.
Access
read-write
1.3.6.1.4.1.6141.2.60.10.1.1.4.3
wwpLeosSwXgradeTftpServer
Description and OID
Status
The dotted IP address of the TFTP server or the host name from which the
current
software package should be downloaded. This is optional. The default TFTP
server is used if this object is set to an empty string. Address must be a unicast
address or host name that is reachable from the agent and no firewalls/acls
preventing TFTP datagrams from being transferred.
Access
read-write
1.3.6.1.4.1.6141.2.60.10.1.1.4.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
56-8 WWP-LEOS-SW-XGRADE-MIB
wwpLeosSwXgradeRevertTimeout
Description and OID
Status
The value in seconds implies the system will revert to previous software
current
package if the protect operation is not issued following the activate operation
completion. A value of 0 implies the system does not revert automatically and
remains in the unprotected state.
Access
read-write
1.3.6.1.4.1.6141.2.60.10.1.1.4.5
wwpLeosSwXgradeBootOrder
Description and OID
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.10.1.1.4.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-SW-XGRADE-MIB 56-9
wwpLeosSwXgradeOptype
Description and OID
Status
Access
current
read-write
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.10.1.1.30
MIB Reference
009-3220-011 Standard Revision A
August 2013
56-10 WWP-LEOS-SW-XGRADE-MIB
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
wwpLeosSwDownloadCompletion
A wwpLeosSwDownloadCompletion notification is sent at the completion of a
software download request. Variable bindings include:
wwpLeosSwDownloadPackageName, wwpLeosSwDownloadFailCause, and
wwpLeosSwDownloadNotificationInfo.
Object Identifier: 1.3.6.1.4.1.6141.2.60.10.2.0.1
Status: current
Supported Platforms: 3916, 3930, 3931, 3930, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosSwXgradeOpCompletion
A wwpLeosSwXgradeOpCompletion notification is sent at the completion of a
install/activate/Xgrade request. Variable bindings include:
wwpLeosSwXgradeBladeId.
Object Identifier: 1.3.6.1.4.1.6141.2.60.10.2.0.2
Status: current
Supported Platforms: 3916, 3930, 3931, 3930, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosSwXgradeBladePkgIncorrect
A wwpLeosSwXgradeBladePkgIncorrect notification is sent if device
recognizes that it is running incorrect software version.
Object Identifier: 1.3.6.1.4.1.6141.2.60.10.2.0.3
Status: current
Supported Platforms: 3916, 3930, 3931, 3930, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosSwXgradeCompletion
A wwpLeosTceSwXgradeCompletion notification is sent at the completion of
a wwpLeosTceSwXgradeOp (download/install/ activate/... etc). Variable
bindings include: wwpLeosSwXgradeOp and wwpLeosSwXgradeStatus.
Object Identifier: 1.3.6.1.4.1.6141.2.60.10.2.0.4
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-SW-XGRADE-MIB 56-11
Status: current
Supported Platforms: none
MIB Reference
009-3220-011 Standard Revision A
August 2013
56-12 WWP-LEOS-SW-XGRADE-MIB
MIB Reference
009-3220-011 Standard Revision A
August 2013
57-1
WWP-LEOS-SYSLOG-COLLECTOR-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-SYSLOG-COLLECTOR-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosSyslogEnable
Description and OID
Status
Access
Specifies whether the Syslog client is enabled. This is the system wide
parameter and it overwrites any collector specific managed object to enable
or disable the Syslog client.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.21.1.1.1
wwpLeosSyslogCollectorTable
Description and OID
A table containing Syslog collector information. To create entries in this table, current
use the SNMP multiple set operation. wwpLeosSyslogCollectorAddr,
wwpLeosSyslogIndex and wwpLeosSyslogCollectorStatus are required fields
that need to be set to create the entry. To delete an entry, set
wwpLeosSyslogCollectorStatus to 'destroy'.
not-accessible
1.3.6.1.4.1.6141.2.60.21.1.2.1
wwpLeosSyslogCollectorEntry
Description and OID
Status
current
Defines the information pertaining to a Syslog collector to which Syslog
messages are relayed. Entries in this table with an access level of read- create
MUST be considered non-volatile and MUST be maintained across entity
resets.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.21.1.2.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
57-4 WWP-LEOS-SYSLOG-COLLECTOR-MIB
wwpLeosSyslogCollectorStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo' and specify at
least wwpLeosSyslogIndex and wwpLeosSyslogCollectorAddr. To delete the
entry set this object to 'destroy'.
Access
read-create
1.3.6.1.4.1.6141.2.60.21.1.2.1.1.11
wwpLeosSyslogCollectorCustomPrefix
Description and OID
Status
Access
Specifies the Syslog custom prefix that is prepended to all Syslog messages
before device sends the messages to the collector.
current
read-create
Status
Access
current
read-only
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.21.1.2.1.1.12
wwpLeosSyslogCollectorResolvedInetAddrType
1.3.6.1.4.1.6141.2.60.21.1.2.1.1.13
wwpLeosSyslogCollectorResolvedInetAddress
Description and OID
1.3.6.1.4.1.6141.2.60.21.1.2.1.1.14
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-SYSLOG-COLLECTOR-MIB 57-5
wwpLeosSyslogCollectorSeverityTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This object specifies the severity of the Syslog message that this collector
should receive.
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.21.1.2.2
wwpLeosSyslogCollectorSeverityEntry
1.3.6.1.4.1.6141.2.60.21.1.2.2.1
wwpLeosSyslogCollectorSeverity
1.3.6.1.4.1.6141.2.60.21.1.2.2.1.1
wwpLeosSyslogCollectorSeverityRowStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete the
entry set this to 'destroy'.
read-create
1.3.6.1.4.1.6141.2.60.21.1.2.2.1.2
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
58-1
WWP-LEOS-SYSTEM-CONFIG-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-SYSTEM-CONFIG-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosSystemConfigDefaultGateway
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
This object specifies the bootup configuration file for the system. Setting is
object is similar to setting default load config file name. When the device
reboots, it attempts to load the file specified by
wwpLeosSystemConfigBootCfgFile.
current
read-write
1.3.6.1.4.1.6141.2.60.12.1.1.1
wwpLeosSystemConfigBootCmdFile
1.3.6.1.4.1.6141.2.60.12.1.1.2
wwpLeosSystemConfigBootCfgFile
1.3.6.1.4.1.6141.2.60.12.1.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
58-2 WWP-LEOS-SYSTEM-CONFIG-MIB
wwpLeosSystemClockDateTime
Description and OID
Status
The current system date and time of box. There are no provisions for local time current
or daylight savings. All times use the 24 hr clock and are UTC. Because device
time is UTC, only first 7 bytes of DateAndTime data are returned, as per
RFC1903.
Access
read-write
1.3.6.1.4.1.6141.2.60.12.1.1.4
wwpLeosSystemConfigSavePermFile
Description and OID
Status
Access
current
read-write
Status
Access
Setting this object resets the name of the last configuration file that was
successfully executed by the device.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.12.1.1.5
wwpLeosSystemConfigLastFileNameReset
1.3.6.1.4.1.6141.2.60.12.1.1.6
wwpLeosSystemServiceMode
Description and OID
Setting this object changes the service mode of operation. It causes the device current
to reboot. If this object is set to 'none' the device rejects the request and returns
an error. Applicable to 311v only.
read-write
1.3.6.1.4.1.6141.2.60.12.1.1.7
wwpLeosSystemConfigBackupGateway
Description and OID
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.12.1.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-SYSTEM-CONFIG-MIB 58-3
wwpLeosSystemConfigCustomerCfgFile
Description and OID
Status
This object sets the name of the default customer configuration file, which is current
the file that is copied to the default configuration file during a reset-tocustomer-default operation. Setting this object to an empty string removes the
file name from the system configuration.
Access
read-write
1.3.6.1.4.1.6141.2.60.12.1.1.9
wwpLeosSystemConfigDefaultGatewayTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.12.1.1.10
wwpLeosSystemConfigDefaultGatewayEntry
1.3.6.1.4.1.6141.2.60.12.1.1.10.1
wwpLeosSystemConfigDefaultGatewayIndex
1.3.6.1.4.1.6141.2.60.12.1.1.10.1.1
wwpLeosSystemConfigDefaultGatewayInetAddrType
1.3.6.1.4.1.6141.2.60.12.1.1.10.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
58-4 WWP-LEOS-SYSTEM-CONFIG-MIB
wwpLeosSystemConfigDefaultGatewayInetAddress
Description and OID
Status
current
Default gateway IP address. This OID must be used in conjunction with
wwpLeosSystemConfigDefaultGatewayInetAddrType. The InetAddress set
here should be compliant with RFC 4001 InetAddressType. When this OID is
set, wwpLeosSystemConfigDefaultGateway is set to 0.0.0.0.
Access
read-create
1.3.6.1.4.1.6141.2.60.12.1.1.10.1.3
wwpLeosSystemConfigDefaultGatewayInterfaceName
Description and OID
Status
Access
current
read-create
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.12.1.1.10.1.4
wwpLeosSystemConfigDefaultGatewayMetric
1.3.6.1.4.1.6141.2.60.12.1.1.10.1.5
wwpLeosSystemConfigDefaultGatewayStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, a manager must set this object to 'createAndGo'.
To delete an entry, set this object to 'destroy'.
read-create
1.3.6.1.4.1.6141.2.60.12.1.1.10.1.6
wwpLeosSystemConfigBackupGatewayTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.12.1.1.11
wwpLeosSystemConfigBackupGatewayEntry
1.3.6.1.4.1.6141.2.60.12.1.1.11.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-SYSTEM-CONFIG-MIB 58-5
wwpLeosSystemConfigBackupGatewayIndex
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.12.1.1.11.1.1
wwpLeosSystemConfigBackupGatewayInetAddrType
1.3.6.1.4.1.6141.2.60.12.1.1.11.1.2
wwpLeosSystemConfigBackupGatewayInetAddress
Description and OID
current
Backup gateway IP address. This OID must be used in conjunction with
wwpLeosSystemConfigBackupGatewayInetAddrType. The InetAddress set
here should be compliant with rfc 4001 InetAddressType. When this OID is set,
wwpLeosSystemConfigBackupGateway is set ot 0.0.0.0.
read-create
1.3.6.1.4.1.6141.2.60.12.1.1.11.1.3
wwpLeosSystemConfigBackupGatewayInterfaceName
Description and OID
Status
Access
current
read-create
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.12.1.1.11.1.4
wwpLeosSystemConfigBackupGatewayMetric
1.3.6.1.4.1.6141.2.60.12.1.1.11.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
58-6 WWP-LEOS-SYSTEM-CONFIG-MIB
wwpLeosSystemConfigBackupGatewayStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete an
entry, set this object to 'destroy'.
Access
read-create
1.3.6.1.4.1.6141.2.60.12.1.1.11.1.6
wwpLeosSystemConfigSaveFileName
Description and OID
Status
Access
read-write
1.3.6.1.4.1.6141.2.60.12.1.2.1
wwpLeosSystemConfigControl
Description and OID
Status
current
Controls configuration options on the device. The current options are: save:
to make the configuration changes made using SNMP persistent across a
reboot. mfgDefaultCfg: Set system configuration to factory defaults. Note: This
wipes out all the current configuration including password and VLAN
information. If the system does not support any of these control configuration
options, it returns an error while trying to set this object to the specific option.
A read on this object returns none(0).
Access
read-write
1.3.6.1.4.1.6141.2.60.12.1.2.2
wwpLeosSystemConfigFilepath
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.12.1.2.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-SYSTEM-CONFIG-MIB 58-7
wwpLeosSystemConfigFileTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.12.1.2.4
wwpLeosSystemConfigFileEntry
1.3.6.1.4.1.6141.2.60.12.1.2.4.1
wwpLeosSystemConfigFileIndex
1.3.6.1.4.1.6141.2.60.12.1.2.4.1.1
wwpLeosSystemConfigFileName
1.3.6.1.4.1.6141.2.60.12.1.2.4.1.2
wwpLeosSystemConfigActivateFile
Description and OID
current
Set this object to 'loadCfg to load the 'wwpLeosSystemConfigFileName'
configuration. If the operation is successful, this object performs
the CLI
equivalent to these commands and returns the status. Setting this object to
'resetToCfg' kills the load module, reloads a new load module and applies the
config file specified by wwpLeosSystemConfigFileName. Setting this object to
'none' does nothing.
read-write
1.3.6.1.4.1.6141.2.60.12.1.2.4.1.3
wwpLeosTelnetMaxBaseUserSessions
Description and OID
Status
Access
The max number of base user telnet sessions for the device.
current
read-write
1.3.6.1.4.1.6141.2.60.12.1.3.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
58-8 WWP-LEOS-SYSTEM-CONFIG-MIB
wwpLeosTelnetMaxSuperUserSessions
Description and OID
Status
Access
The max number of super user telnet sessions for the device.
current
read-write
Status
Access
The max number of admin users telnet sessions for the device.
current
read-write
Status
Access
The OID to display CPU load in last 1 minute. This value is an integer
representation of the CPU load (load average * 100).
current
read-only
Status
Access
The OID to display CPU load in last 10 minutes. This value is an integer
representation of the CPU load (load average * 100).
current
read-only
Status
Access
The OID to display CPU load in last 15 minutes. This value is an integer
representation of the CPU load (load average * 100).
current
read-only
Status
Access
The OID to display CPU load in last 5 minutes. This value is an integer
representation of the CPU load (load average * 100).
current
read-only
1.3.6.1.4.1.6141.2.60.12.1.3.2
wwpLeosTelnetMaxAdminUserSessions
1.3.6.1.4.1.6141.2.60.12.1.3.3
wwpLeosSystemCpuLoad1Min
1.3.6.1.4.1.6141.2.60.12.1.7.1
wwpLeosSystemCpuLoad10Min
1.3.6.1.4.1.6141.2.60.12.1.7.2
wwpLeosSystemCpuLoad15Min
1.3.6.1.4.1.6141.2.60.12.1.7.3
wwpLeosSystemCpuLoad5Min
1.3.6.1.4.1.6141.2.60.12.1.7.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-SYSTEM-CONFIG-MIB 58-9
wwpLeosSystemCpuLoad1MinMinimum
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.12.1.7.5
wwpLeosSystemCpuLoad1MinMaximum
1.3.6.1.4.1.6141.2.60.12.1.7.6
wwpLeosSystemCpuLoad1MinState
1.3.6.1.4.1.6141.2.60.12.1.7.7
wwpLeosSystemCpuLoad15MinMinimum
1.3.6.1.4.1.6141.2.60.12.1.7.8
wwpLeosSystemCpuLoad15MinMaximum
1.3.6.1.4.1.6141.2.60.12.1.7.9
wwpLeosSystemCpuLoad15MinState
1.3.6.1.4.1.6141.2.60.12.1.7.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
58-10 WWP-LEOS-SYSTEM-CONFIG-MIB
wwpLeosSystemCpuLoad5MinMinimum
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.12.1.7.11
wwpLeosSystemCpuLoad5MinMaximum
1.3.6.1.4.1.6141.2.60.12.1.7.12
wwpLeosSystemCpuLoad5MinState
1.3.6.1.4.1.6141.2.60.12.1.7.13
wwpLeosSystemConfigNotifTable
Description and OID
The (conceptual) table listing the configuration file line numbers. This table is current
only used when sending wwpLeosImproperCmdInConfigFile notification. No
Get, GetNext or Set is allowed in this table.
not-accessible
1.3.6.1.4.1.6141.2.60.12.1.8.1
wwpLeosSystemConfigNotifEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.12.1.8.1.1
wwpLeosSystemConfigErrLineNum
Description and OID
1.3.6.1.4.1.6141.2.60.12.1.8.1.1.1
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-SYSTEM-CONFIG-MIB 58-11
wwpLeosSystemConfigErrStr
Description and OID
Status
Access
current
The OID is wwpLeosSystemConfigErrStr trap to identify the line that failed
when the configuration was applied. No Get, GetNext or Set is allowed on this
table.
read-only
1.3.6.1.4.1.6141.2.60.12.1.8.1.1.2
wwpLeosSystemConfigErrLinesTotal
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.12.1.8.1.1.3
wwpLeosSystemMemoryUsageTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.12.1.9.1
wwpLeosSystemMemoryUsageEntry
1.3.6.1.4.1.6141.2.60.12.1.9.1.1
wwpLeosSystemMemoryUsagePoolIndex
1.3.6.1.4.1.6141.2.60.12.1.9.1.1.1
wwpLeosSystemMemoryUsageMemoryTotal
1.3.6.1.4.1.6141.2.60.12.1.9.1.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
58-12 WWP-LEOS-SYSTEM-CONFIG-MIB
wwpLeosSystemMemoryUsageMemoryLWM
Description and OID
Status
Access
Lowest free memory in the Memory Pool in bytes. Not supported in SAOS 6.x current
read-only
1.3.6.1.4.1.6141.2.60.12.1.9.1.1.3
wwpLeosSystemMemoryUsageMemoryFree
Description and OID
Status
Access
Amount of free memory in the Memory Pool in bytes. This corresponds to the current
CLI's memory never used.
read-only
1.3.6.1.4.1.6141.2.60.12.1.9.1.1.4
wwpLeosSystemMemoryUsageStatus
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.12.1.9.1.1.5
wwpLeosSystemMemoryUsageMemoryUsed
1.3.6.1.4.1.6141.2.60.12.1.9.1.1.6
wwpLeosSystemMemoryUsageMemoryAvailable
1.3.6.1.4.1.6141.2.60.12.1.9.1.1.7
wwpLeosSystemXFtpMode
1.3.6.1.4.1.6141.2.60.12.1.10.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-SYSTEM-CONFIG-MIB 58-13
wwpLeosSystemXFtpServer
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.12.1.10.2
wwpLeosSystemXFtpUserName
1.3.6.1.4.1.6141.2.60.12.1.10.3
wwpLeosSystemXFtpPasswd
1.3.6.1.4.1.6141.2.60.12.1.10.4
wwpLeosSystemXFtpNumOfRetries
1.3.6.1.4.1.6141.2.60.12.1.10.5
wwpLeosSystemXFtpRetryInterval
1.3.6.1.4.1.6141.2.60.12.1.10.6
wwpLeosSystemXFtpConnectionTimeout
1.3.6.1.4.1.6141.2.60.12.1.10.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
58-14 WWP-LEOS-SYSTEM-CONFIG-MIB
wwpLeosSystemXFtpTFtpServerTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.12.1.10.8
wwpLeosSystemXFtpTFtpServerEntry
1.3.6.1.4.1.6141.2.60.12.1.10.8.1
wwpLeosSystemXFtpTFtpServerIndex
1.3.6.1.4.1.6141.2.60.12.1.10.8.1.1
wwpLeosSystemXFtpTFtpServerHostName
1.3.6.1.4.1.6141.2.60.12.1.10.8.1.2
wwpLeosSystemXFtpTFtpServerRowStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete an
entry, set this object to 'destroy'. At the current time, there is only one, static
row in this table, with index 1.
read-create
1.3.6.1.4.1.6141.2.60.12.1.10.8.1.6
wwpLeosSystemXFtpFtpServerTable
Description and OID
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.12.1.10.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-SYSTEM-CONFIG-MIB 58-15
wwpLeosSystemXFtpFtpServerEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
Password to be used with the default FTP server. Returns an empty string
when read. Either the password or the secret may be set, but not both.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.12.1.10.9.1
wwpLeosSystemXFtpFtpServerIndex
1.3.6.1.4.1.6141.2.60.12.1.10.9.1.1
wwpLeosSystemXFtpFtpServerHostName
1.3.6.1.4.1.6141.2.60.12.1.10.9.1.2
wwpLeosSystemXFtpFtpServerUserName
1.3.6.1.4.1.6141.2.60.12.1.10.9.1.3
wwpLeosSystemXFtpFtpServerPassword
1.3.6.1.4.1.6141.2.60.12.1.10.9.1.4
wwpLeosSystemXFtpFtpServerSecret
Description and OID
current
Password secret to be used with the default FTP server. Returns an empty
string when read. Either the password or the secret may be set, but not both.
read-create
1.3.6.1.4.1.6141.2.60.12.1.10.9.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
58-16 WWP-LEOS-SYSTEM-CONFIG-MIB
wwpLeosSystemXFtpFtpServerRowStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete an
entry, set this object to 'destroy'. At the current time, there is only one, static
row in this table, with index 1.
Access
read-create
1.3.6.1.4.1.6141.2.60.12.1.10.9.1.6
wwpLeosSystemXFtpSFtpServerTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-create
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.12.1.10.10
wwpLeosSystemXFtpSFtpServerEntry
1.3.6.1.4.1.6141.2.60.12.1.10.10.1
wwpLeosSystemXFtpSFtpServerIndex
1.3.6.1.4.1.6141.2.60.12.1.10.10.1.1
wwpLeosSystemXFtpSFtpServerHostName
1.3.6.1.4.1.6141.2.60.12.1.10.10.1.2
wwpLeosSystemXFtpSFtpServerUserName
1.3.6.1.4.1.6141.2.60.12.1.10.10.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-SYSTEM-CONFIG-MIB 58-17
wwpLeosSystemXFtpSFtpServerPassword
Description and OID
Status
Access
Password to be used with the default SFTP server. Returns an empty string
when read. Either the password or the secret may be set, but not both.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.12.1.10.10.1.4
wwpLeosSystemXFtpSFtpServerSecret
Description and OID
Password secret to be used with the default SFTP server. Returns an empty current
string when read. Either the password or the secret may be set, but not both.
read-create
1.3.6.1.4.1.6141.2.60.12.1.10.10.1.5
wwpLeosSystemXFtpSFtpServerRowStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete an
entry, set this object to 'destroy'. At the current time, there is only one, static
row in this table, with index 1.
Access
read-create
1.3.6.1.4.1.6141.2.60.12.1.10.10.1.6
wwpLeosSystemCpuUtilizationLast5Seconds
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.12.1.11.1
wwpLeosSystemCpuUtilizationLast5SecondsMinimum
1.3.6.1.4.1.6141.2.60.12.1.11.2
wwpLeosSystemCpuUtilizationLast5SecondsMaximum
1.3.6.1.4.1.6141.2.60.12.1.11.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
58-18 WWP-LEOS-SYSTEM-CONFIG-MIB
wwpLeosSystemCpuUtilizationLast5SecondsState
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.12.1.11.4
wwpLeosSystemCpuUtilizationLast10Seconds
1.3.6.1.4.1.6141.2.60.12.1.11.5
wwpLeosSystemCpuUtilizationLast10SecondsMinimum
1.3.6.1.4.1.6141.2.60.12.1.11.6
wwpLeosSystemCpuUtilizationLast10SecondsMaximum
1.3.6.1.4.1.6141.2.60.12.1.11.7
wwpLeosSystemCpuUtilizationLast10SecondsState
1.3.6.1.4.1.6141.2.60.12.1.11.8
wwpLeosSystemCpuUtilizationLast60Seconds
1.3.6.1.4.1.6141.2.60.12.1.11.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-SYSTEM-CONFIG-MIB 58-19
wwpLeosSystemCpuUtilizationLast60SecondsMinimum
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.12.1.11.10
wwpLeosSystemCpuUtilizationLast60SecondsMaximum
1.3.6.1.4.1.6141.2.60.12.1.11.11
wwpLeosSystemCpuUtilizationLast60SecondsState
1.3.6.1.4.1.6141.2.60.12.1.11.12
wwpLeosSystemFileSystemUtilizationTmpfsCurrent
1.3.6.1.4.1.6141.2.60.12.1.12.1
wwpLeosSystemFileSystemUtilizationTmpfsMinimum
1.3.6.1.4.1.6141.2.60.12.1.12.2
wwpLeosSystemFileSystemUtilizationTmpfsMaximum
1.3.6.1.4.1.6141.2.60.12.1.12.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
58-20 WWP-LEOS-SYSTEM-CONFIG-MIB
wwpLeosSystemFileSystemUtilizationTmpfsState
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.12.1.12.4
wwpLeosSystemFileSystemUtilizationSysfsCurrent
1.3.6.1.4.1.6141.2.60.12.1.12.5
wwpLeosSystemFileSystemUtilizationSysfsMinimum
1.3.6.1.4.1.6141.2.60.12.1.12.6
wwpLeosSystemFileSystemUtilizationSysfsMaximum
1.3.6.1.4.1.6141.2.60.12.1.12.7
wwpLeosSystemFileSystemUtilizationSysfsState
1.3.6.1.4.1.6141.2.60.12.1.12.8
wwpLeosSystemFileSystemUtilizationXftpCurrent
1.3.6.1.4.1.6141.2.60.12.1.12.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-SYSTEM-CONFIG-MIB 58-21
wwpLeosSystemFileSystemUtilizationXftpMinimum
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.12.1.12.10
wwpLeosSystemFileSystemUtilizationXftpMaximum
1.3.6.1.4.1.6141.2.60.12.1.12.11
wwpLeosSystemFileSystemUtilizationXftpState
1.3.6.1.4.1.6141.2.60.12.1.12.12
wwpLeosSystemMemoryUtilizationUsedMemoryCurrent
1.3.6.1.4.1.6141.2.60.12.1.13.1
wwpLeosSystemMemoryUtilizationUsedMemoryMinimum
1.3.6.1.4.1.6141.2.60.12.1.13.2
wwpLeosSystemMemoryUtilizationUsedMemoryMaximum
1.3.6.1.4.1.6141.2.60.12.1.13.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
58-22 WWP-LEOS-SYSTEM-CONFIG-MIB
wwpLeosSystemMemoryUtilizationAvailableMemoryCurrent
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.12.1.13.4
wwpLeosSystemMemoryUtilizationAvailableMemoryMinimum
1.3.6.1.4.1.6141.2.60.12.1.13.5
wwpLeosSystemMemoryUtilizationAvailableMemoryMaximum
1.3.6.1.4.1.6141.2.60.12.1.13.6
wwpLeosSystemMemoryUtilizationAvailableMemoryState
1.3.6.1.4.1.6141.2.60.12.1.13.7
wwpLeosSystemGuardianAdminEnable
Description and OID
Sets the admin state for the system guardian. A reboot is required for changes current
to take effect
read-write
1.3.6.1.4.1.6141.2.60.12.1.14.1
wwpLeosSystemGuardianOperEnable
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.12.1.14.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-SYSTEM-CONFIG-MIB 58-23
wwpLeosSystemGuardianLimitNumReboots
Description and OID
Status
Access
current
read-write
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.12.1.14.3
wwpLeosSystemGuardianConsecutiveReboots
1.3.6.1.4.1.6141.2.60.12.1.14.4
wwpLeosSystemGuardianTotalReboots
1.3.6.1.4.1.6141.2.60.12.1.14.5
wwpLeosSystemSftpServerAdminState
1.3.6.1.4.1.6141.2.60.12.1.15.1
wwpLeosSystemFtpServerAdminState
1.3.6.1.4.1.6141.2.60.12.1.15.2
wwpLeosSystemTftpServerAdminState
1.3.6.1.4.1.6141.2.60.12.1.15.3
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
58-24 WWP-LEOS-SYSTEM-CONFIG-MIB
wwpLeosImproperCmdInConfigFile
A wwpLeosImproperCmdInConfigFile notif signifies that the SNMP entity,
acting in an agent role, has counted the number of improper commands that
were found in the configuration file while processing the
wwpLeosSystemConfigFileName. Variable bindings include:
wwpLeosSystemConfigFileName, wwpLeosSystemConfigErrLineNum,
andwwpLeosSystemConfigErrLinesTotal.
Object Identifier: 1.3.6.1.4.1.6141.2.60.12.2.0.1
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosSystemServiceModeChange
A wwpLeosSystemServiceModeChange notification is sent whenever
someone changes the system service mode between mpls and pbt. Variable
bindings include: wwpLeosSystemServiceMode.
Object Identifier: 1.3.6.1.4.1.6141.2.60.12.2.0.2
Status: current
Supported Platforms: none
wwpLeosSystemMemoryStatusNotification
A wwpLeosSystemMemoryStatusNotification notification is sent whenever
the system memory is below threshold limit. Variable bindings include:
wwpLeosSystemMemoryUsageMemoryTotal,
wwpLeosSystemMemoryUsageMemoryFree,
wwpLeosSystemMemoryUsageStatus, and
wwpLeosSystemMemoryUsageMemoryAvailable.
Object Identifier: 1.3.6.1.4.1.6141.2.60.12.2.0.3
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosImproperCmdInConfigLineString
A wwpLeosImproperCmdInConfigLineString notif signifies that the SNMP
entity, acting in an agent role, has detected that improper commands were
found in the configuration file while processing the
wwpLeosSystemConfigFileName. Variable bindings include
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-SYSTEM-CONFIG-MIB 58-25
wwpLeosSystemCpuUtilization5SecondStatusTrap
The wwpLeosSystemCpuUtilizationStatusTrap is sent when the 5 second
CPU utilization changes states. Variable bindings include:
wwpLeosSystemCpuUtilizationLast5Seconds and
wwpLeosSystemCpuUtilizationLast5SecondsState.
Object Identifier: 1.3.6.1.4.1.6141.2.60.12.2.0.5
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosSystemCpuUtilization10SecondStatusTrap
The wwpLeosSystemCpuUtilization10SecondStatusTrap is sent when the 10
second CPU utilization changes states. Variable bindings include:
wwpLeosSystemCpuUtilizationLast10Seconds and
wwpLeosSystemCpuUtilizationLast10SecondsState.
Object Identifier: 1.3.6.1.4.1.6141.2.60.12.2.0.6
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosSystemCpuUtilization60SecondStatusTrap
The wwpLeosSystemCpuUtilizationStatusTrap is sent when the 60 second
CPU utilization changes states. Variable bindings include:
wwpLeosSystemCpuUtilizationLast60Seconds and
wwpLeosSystemCpuUtilizationLast60SecondsState.
Object Identifier: 1.3.6.1.4.1.6141.2.60.12.2.0.7
Status: current
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
58-26 WWP-LEOS-SYSTEM-CONFIG-MIB
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosSystemCpu1MinLoadStatusTrap
The wwpLeosSystemCpuLoadStatusTrap is sent when the CPU load over
one minute changes states. Variable bindings include:
wwpLeosSystemCpuLoad1Min and wwpLeosSystemCpuLoad1MinState
Object Identifier: 1.3.6.1.4.1.6141.2.60.12.2.0.8
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosSystemCpu5MinLoadStatusTrap
The wwpLeosSystemCpuLoadStatusTrap is sent when the CPU load over five
minutes changes states. Variable bindings include:
wwpLeosSystemCpuLoad5Min and wwpLeosSystemCpuLoad5MinState.
Object Identifier: 1.3.6.1.4.1.6141.2.60.12.2.0.9
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosSystemCpu15MinLoadStatusTrap
The wwpLeosSystemCpuLoadStatusTrap is sent when the CPU load over
fifteen minutes changes states. Variable bindings include:
wwpLeosSystemCpuLoad15Min and wwpLeosSystemCpuLoad15MinState.
Object Identifier: 1.3.6.1.4.1.6141.2.60.12.2.0.10
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosSystemMemoryUtilizationStatusTrap
The wwpLeosSystemMemoryUtilizationStatusTrap is sent when the memory
utilization changes states. Variable bindings include:
wwpLeosSystemMemoryUtilizationAvailableMemoryCurrent and
wwpLeosSystemMemoryUtilizationAvailableMemoryState.
Object Identifier: 1.3.6.1.4.1.6141.2.60.12.2.0.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-SYSTEM-CONFIG-MIB 58-27
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosSystemFileSystemUtilizationTmpStatusTrap
The wwpLeosSystemFileSystemUtilizationTmpStatusTrap is sent when the
usage of '/tmp/' changes states. Variable bindings include:
wwpLeosSystemFileSystemUtilizationTmpfsCurrent and
wwpLeosSystemFileSystemUtilizationTmpfsState.
Object Identifier: 1.3.6.1.4.1.6141.2.60.12.2.0.12
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosSystemFileSystemUtilizationSysfsStatusTrap
The wwpLeosSystemFileSystemUtilizationSysfsStatusTrap is sent when the
usage of '/mnt/sysfs/' changes states. Variable bindings include:
wwpLeosSystemFileSystemUtilizationSysfsCurrent and
wwpLeosSystemFileSystemUtilizationSysfsState.
Object Identifier: 1.3.6.1.4.1.6141.2.60.12.2.0.13
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
wwpLeosSystemFileSystemUtilizationXftpStatusTrap
The wwpLeosSystemFileSystemUtilizationXftpStatusTrap is sent when the
usage of '/mnt/xftp/' changes states. Variable bindings include:
wwpLeosSystemFileSystemUtilizationXftpCurrent,
wwpLeosSystemFileSystemUtilizationXftpState.
Object Identifier: 1.3.6.1.4.1.6141.2.60.12.2.0.14
Status: current
Supported Platforms: 3916, 3930, 3931, 3932, 3940, 3960, 5140, 5142, 5150,
5160
MIB Reference
009-3220-011 Standard Revision A
August 2013
59-1
WWP-LEOS-SYSTEM-CONTROL-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-SYSTEM-CONTROL-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosSysCtrlBridgeRstpEnable
Description and OID
Status
When this object is set to 'true' the RSTP operation for the bridge is enabled. current
Setting this object to 'false' disables bridge RSTP operations.
Access
read-write
1.3.6.1.4.1.6141.2.60.25.1.1.1
wwpLeosSysCtrlLacpEnable
Description and OID
Status
Setting this object to 'true' enables aggregation globally. Setting this object to current
'false' disables aggregation globally.
Access
read-write
1.3.6.1.4.1.6141.2.60.25.1.1.2
wwpLeosSysCtrlLldpState
Description and OID
Status
Access
current
read-write
Status
Access
Setting this object sets the destination MAC address for LLDP.
current
read-write
1.3.6.1.4.1.6141.2.60.25.1.1.3
wwpLeosSysCtrlLldpDaMac
1.3.6.1.4.1.6141.2.60.25.1.2.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
59-2 WWP-LEOS-SYSTEM-CONTROL-MIB
wwpLeosSysCtrlLldpEthType
Description and OID
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.25.1.2.2
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
60-1
WWP-LEOS-TABLE-CHG-NOTIF-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-TABLE-CHG-NOTIF-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosTableTrapNotifTimer
Description and OID
Status
Setting this value sets the trap timer. The device sends the trap notification current
after every wwpLeosTableTrapNotifTimer seconds if any of the table changes.
Access
read-write
1.3.6.1.4.1.6141.2.60.9.1.1
wwpLeosListenerRefreshTimer
Description and OID
Status
current
Setting this value sets the listener refresh timer. The device sends the trap
notification 'wwpLeosTableRefreshTrap' after every
'wwpLeosListenerRefreshTimer' seconds if count value associated with
'wwpLeosListenerEntry' becomes 20 or 10 or 5. The device deletes entry from
wwpLeosListenerEntry once count = 0. Minimum value is 30 seconds and
maximum = 1000 seconds.
Access
read-write
1.3.6.1.4.1.6141.2.60.9.1.2
wwpLeosTableChgNotifTable
Description and OID
Status
Access
Table of Ems.
current
not-accessible
1.3.6.1.4.1.6141.2.60.9.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
60-2 WWP-LEOS-TABLE-CHG-NOTIF-MIB
wwpLeosTableChgNotifEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
This is the OID of the table for which the device sends a trap if anything
changed in this table.
current
read-only
Status
Access
This variables returns the counter value which keeps track of how many times current
wwpLeosTableChgNotifOid has changed. This counter is 32 bit counter and
never resets, except if device is rebooted.
read-only
1.3.6.1.4.1.6141.2.60.9.1.4.1
wwpLeosTableChgNotifIndex
1.3.6.1.4.1.6141.2.60.9.1.4.1.1
wwpLeosTableChgNotifOid
1.3.6.1.4.1.6141.2.60.9.1.4.1.2
wwpLeosTableChgNotifNumChanges
Description and OID
1.3.6.1.4.1.6141.2.60.9.1.4.1.3
wwpLeosListenerTable
Description and OID
Status
Table of EMS/NMS IP's. This table uses Multiple Set operation to create entry current
in the table.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.9.1.5
wwpLeosListenerEntry
Description and OID
Status
Entry of each EMS/NMS who is interested to receive table change notification. current
Access
not-accessible
1.3.6.1.4.1.6141.2.60.9.1.5.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TABLE-CHG-NOTIF-MIB 60-3
wwpLeosListenerIndex
Description and OID
Status
Access
current
read-only
Status
Access
current
read-create
Status
Access
current
This shows the resolved IP address of the host name specified in
wwpLeosListenerAddr. If wwpLeosListenerAddr is set to IpV4 type then
wwpLeosListenerResolvedIp is equal to wwpLeosListenerAddr. If
wwpLeosListenerAddr is set to DNS type then wwpLeosListenerResolvedIp is
equal to 0 if it is unresolved or is equal to resolved IP address.
read-only
1.3.6.1.4.1.6141.2.60.9.1.5.1.1
wwpLeosListenerAddr
1.3.6.1.4.1.6141.2.60.9.1.5.1.2
wwpLeosListenerResolvedIp
Description and OID
1.3.6.1.4.1.6141.2.60.9.1.5.1.3
wwpLeosListenerStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. Setting this object
to 'active' if it is already active results in refreshing this entry. Setting this object
to 'createAndGo' if this entry is already active results in refreshing this entry.
This table uses the Multiple Set operation to create entry in the table.
wwpLeosListenerAddr and wwpLeosListenerStatus and index are mandatory
objects that need to be set when creating an entry. When deleting an entry only
the index needs to be specified.
Access
read-create
1.3.6.1.4.1.6141.2.60.9.1.5.1.4
wwpLeosTableChgNotifIndexStr
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.9.1.7.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
60-4 WWP-LEOS-TABLE-CHG-NOTIF-MIB
wwpLeosListenerRefreshCount
Description and OID
Status
Access
This is the count value for each listener entry. when this count value becomes current
zero, the listener entry corresponding to this value is deleted. This count value
is sent in the trap.
read-only
1.3.6.1.4.1.6141.2.60.9.1.7.2
Notifications
This section provides the name, description, object identifier, and supported
platforms for notifications.
wwpLeosTableChgTrap
A notification is sent whenever the table has changed. OID of the table and
the counter associated with this table is sent in the trap. Variable bindings
include: wwpLeosTableChgNotifOid, wwpLeosTableChgNotifNumChanges,
and wwpLeosTableChgNotifIndexStr.
Object Identifier: 1.3.6.1.4.1.6141.2.60.9.2.0.1
Status: current
Supported Platforms: not supported in SAOS 6.x
wwpLeosTableRefreshTrap
A notification is sent whenever the listener table entry needs to be refreshed.
Variable bindings include: wwpLeosListenerRefreshCount.
Object Identifier: 1.3.6.1.4.1.6141.2.60.9.2.0.2
Status: current
Supported Platforms: not supported in SAOS 6.x
MIB Reference
009-3220-011 Standard Revision A
August 2013
61-1
WWP-LEOS-TACACS-CLIENT-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-TACACS-CLIENT-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosTacacsAdminState
Description and OID
Status
Setting this object administratively enables/disables the TACACS client on the current
device.
Access
read-write
1.3.6.1.4.1.6141.2.60.402.1.1.1
wwpLeosTacacsOperState
Description and OID
Status
Access
current
read-only
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.402.1.1.2
wwpLeosTacacsClientTimeout
1.3.6.1.4.1.6141.2.60.402.1.1.3
wwpLeosTacacsClientRetries
Description and OID
Indicates the number of times the TACACS server should be tried before giving deprecated
up on the server.
read-write
1.3.6.1.4.1.6141.2.60.402.1.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
61-2 WWP-LEOS-TACACS-CLIENT-MIB
wwpLeosTacacsClientPrivilegeLevelRW
Description and OID
Status
Indicates the privilege level used for mapping a range of TACACS privilege current
levels to R-W user privilege level. A privilege level returned by a server is
compared to wwpLeosTacacsClientPrivilegeLevelDiag. If the server privilege
level is less than wwpLeosTacacsClientPrivilegeLevelDiag and greater than
or equal to the wwpLeosTacacsClientPrivilegeLevelRW, the privilege level is
super-user.
Access
read-write
1.3.6.1.4.1.6141.2.60.402.1.1.5
wwpLeosTacacsClientPrivilegeLevelAdmin
Description and OID
Status
current
Indicates the privilege level used for mapping a range of TACACS privilege
levels to Admin user privilege level. A privilege level returned by a server is
compared to wwpLeosTacacsClientPrivilegeLevelRW. If the server privilege
level is less than wwpLeosTacacsClientPrivilegeLevelRW and greater than or
equal to the wwpLeosTacacsClientPrivilegeLevelAdmin, the privilege level is
Admin. Not supported on all platforms.
Access
read-write
1.3.6.1.4.1.6141.2.60.402.1.1.6
wwpLeosTacacsClientPrivilegeLevelDiag
Description and OID
Status
current
Indicates the privilege level used for mapping a range of TACACS privilege
levels to Diagnostic user privilege level. A privilege level returned by a server
is compared to this value. If server privilege level is greater than or equal to the
wwpLeosTacacsClientPrivilegeLevelDiag, the privilege level is diag.
Access
read-write
1.3.6.1.4.1.6141.2.60.402.1.1.7
wwpLeosTacacsClientAuthKey
Description and OID
Status
Access
The authentication key to be used for TACACS servers. Retrieving the value
of this object via SNMP returns an empty string for security reasons.
current
read-write
1.3.6.1.4.1.6141.2.60.402.1.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TACACS-CLIENT-MIB 61-3
wwpLeosTacacsAuthenticationAdminState
Description and OID
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.402.1.1.9
wwpLeosTacacsAuthorizationAdminState
Description and OID
read-write
1.3.6.1.4.1.6141.2.60.402.1.1.10
wwpLeosTacacsAccountingAdminState
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.402.1.1.11
wwpLeosTacacsSyslogAdminState
1.3.6.1.4.1.6141.2.60.402.1.1.12
wwpLeosTacacsClientServerTable
Description and OID
current
Lists the possible TACACS servers. While creating an entry, the following
objects must be specified: wwpLeosTacacsClientServerStatus,
wwpLeosTacacsClientServerAddr. SNMP multiple set operation must be used
to create the entry.
not-accessible
1.3.6.1.4.1.6141.2.60.402.1.1.13
wwpLeosTacacsClientServerEntry
Description and OID
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.402.1.1.13.1
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
61-4 WWP-LEOS-TACACS-CLIENT-MIB
wwpLeosTacacsClientServerIndex
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-write
Status
Access
current
When wwpLeosTacacsClientServerAddr represents: Host name : The
resolved address is either the Ipv4 address or Ipv6 address. Ipv4 address : The
resolved address is the same Ipv4 address. Ipv6 address : The resolved
address is the same Ipv6 address. When the resolved address represents:
Ipv4 address : wwpLeosTacacsClientServerResolvedAddr represents the
resolved Ipv4 address. wwpLeosTacacsClientServerResolvedInetAddr used
in conjunction with wwpLeosTacacsClientServerResolvedInetAddrType
represents the same Ipv4 address. Ipv6 address :
wwpLeosTacacsClientServerResolvedAddr represents 0.0.0.0.
wwpLeosTacacsClientServerResolvedInetAddr used in conjunction with
wwpLeosTacacsClientServerResolvedInetAddrType represents the Ipv6
address.
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.1
wwpLeosTacacsClientServerAddr
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.2
wwpLeosTacacsClientServerResolvedAddr
Description and OID
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.3
wwpLeosTacacsClientServerPriority
Description and OID
Status
Specifies the priority of TACACS servers configured on the device. This is the current
order in which the servers are accessed.
Access
read-write
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.4
wwpLeosTacacsClientServerAuthPort
Description and OID
Status
current
The destination TCP port number to which TACACS messages should be
sent. The TACACS server is not used for authentication if this port number is
0.
Access
read-write
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TACACS-CLIENT-MIB 61-5
wwpLeosTacacsClientServerAccessRequests
Description and OID
Status
Access
The number of TACACS Access-Request packets sent to this server from the current
global TACACS client. This does not include retransmissions.
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.6
wwpLeosTacacsClientServerAccessRetransmissions
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.7
wwpLeosTacacsClientServerAccessAccepts
Description and OID
Status
Access
current
read-only
Status
Access
The number of TACACS Access-Reject packets (valid or invalid) received from current
this server by the global TACACS client.
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.8
wwpLeosTacacsClientServerAccessRejects
Description and OID
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.9
wwpLeosTacacsClientServerMalformedAccessResponses
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
61-6 WWP-LEOS-TACACS-CLIENT-MIB
wwpLeosTacacsClientServerBadAuthenticators
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.11
wwpLeosTacacsClientServerPendingRequests
Description and OID
Status
deprecated
The number of TACACS Access-PendingRequest packets destined for this
server from the global TACACS client that have not yet timed out or received
a response. This variable is incremented when an Access-Request is sent and
decremented due to receipt of an Access-Accept, Access-Reject or AccessChallenge, a timeout or retransmission.
Access
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.12
wwpLeosTacacsClientServerTimeouts
Description and OID
Status
Access
current
read-only
Status
Access
The number of TACACS packets of unknown type that were received from this current
server on the authentication port by the global TACACS client.
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.13
wwpLeosTacacsClientServerUnknownTypes
Description and OID
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.14
wwpLeosTacacsClientServerBadHeaderSequence
Description and OID
Status
Access
The number of TACACS packets of that were received from this server on the current
authentication port by the global TACACS client and dropped for some other
reason by the client.
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.15
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TACACS-CLIENT-MIB 61-7
wwpLeosTacacsClientServerStatus
Description and OID
Status
To create a row in this table, set this object to createAndGo(4). While creating current
an entry, the following objects must be specified:
wwpLeosTacacsClientServerStatus, wwpLeosTacacsClientServerAddr.
SNMP multiple set operation must be used to create the entry. To disable a
TACACS server, set wwpLeosTacacsClientServerStatus object to
'notInService'.
Access
read-create
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.16
wwpLeosTacacsClientServerApplication
Description and OID
Status
Access
This object specifies how the TACACS server should be used for
authentication. Whether this TACACS server should be used for userLogin
authentication or dot1x authentication or both is decided by the value of this
object. Dot1x is not supported on all platforms.
current
read-create
Status
Access
current
read-write
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.17
wwpLeosTacacsClientServerClearStatistics
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.18
wwpLeosTacacsClientGlobalAuthorizationAccessRequests
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.19
wwpLeosTacacsClientGlobalAuthorizationAccessRetransmissions
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.20
MIB Reference
009-3220-011 Standard Revision A
August 2013
61-8 WWP-LEOS-TACACS-CLIENT-MIB
wwpLeosTacacsClientGlobalAuthorizationAccessAccepts
Description and OID
Status
Access
current
read-only
Status
Access
The number of TACACS Access-Reject packets (valid or invalid) received from current
this server.
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.21
wwpLeosTacacsClientGlobalAuthorizationAccessRejects
Description and OID
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.22
wwpLeosTacacsClientGlobalAuthorizationMalformedAccessResponses
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.23
wwpLeosTacacsClientGlobalAuthorizationBadAuthenticators
Description and OID
Status
Access
current
read-only
Status
Access
The number of authentication timeouts to this server. After a timeout the client current
may retry sending to the same server, send to a different server, or give up. A
retry to the same server is counted as a retransmit as well as a timeout. A send
to a different server is counted as a request as well as a timeout.
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.24
wwpLeosTacacsClientGlobalAuthorizationTimeouts
Description and OID
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.25
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TACACS-CLIENT-MIB 61-9
wwpLeosTacacsClientGlobalAuthorizationUnknownTypes
Description and OID
Status
Access
The number of TACACS packets of unknown type that were received from this current
server on the authentication port.
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.26
wwpLeosTacacsClientGlobalAuthorizationBadHeaderSequence
Description and OID
Status
Access
The number of TACACS packets that were received from this server on the
authentication port and dropped for some other reason.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The number of TACACS Access-Reject packets (valid or invalid) received from current
this server.
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.27
wwpLeosTacacsClientGlobalAccountingAccessRequests
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.28
wwpLeosTacacsClientGlobalAccountingAccessRetransmissions
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.29
wwpLeosTacacsClientGlobalAccountingAccessAccepts
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.30
wwpLeosTacacsClientGlobalAccountingAccessRejects
Description and OID
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.31
MIB Reference
009-3220-011 Standard Revision A
August 2013
61-10 WWP-LEOS-TACACS-CLIENT-MIB
wwpLeosTacacsClientGlobalAccountingMalformedAccessResponses
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.32
wwpLeosTacacsClientGlobalAccountingBadAuthenticators
Description and OID
Status
Access
current
read-only
Status
Access
The number of authentication timeouts to this server. After a timeout the client current
may retry sending to the same server, send to a different server, or give up. A
retry to the same server is counted as a retransmit as well as a timeout. A send
to a different server is counted as a request as well as a timeout.
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.33
wwpLeosTacacsClientGlobalAccountingTimeouts
Description and OID
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.34
wwpLeosTacacsClientGlobalAccountingUnknownTypes
Description and OID
Status
Access
The number of TACACS packets of unknown type that were received from this current
server on the authentication port.
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.35
wwpLeosTacacsClientGlobalAccountingBadHeaderSequence
Description and OID
Status
Access
The number of TACACS packets that were received from this server on the
authentication port and dropped for some other reason.
current
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.36
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TACACS-CLIENT-MIB 61-11
wwpLeosTacacsClientServerResolvedInetAddrType
Description and OID
Status
Access
current
Specifies the resolved IP address type .Used in conjunction with
wwpLeosTacacsClientServerResolvedInetAddr. When set to : ipv4 :
wwpLeosTacacsClientServerResolvedInetAddr should be compliant
with
InetAddressIPv4 ipv6 : wwpLeosTacacsClientServerResolvedInetAddr
should be compliant
with InetAddressIPv6
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.37
wwpLeosTacacsClientServerResolvedInetAddr
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.38
wwpLeosTacacsClientAuthenticationServerTable
Description and OID
Status
Lists the possible TACACS servers. While creating an entry, following objects current
must be specified: wwpLeosTacacsClientAuthenticationServerStatus,
wwpLeosTacacsClientAuthenticationServerAddr. SNMP multiple set
operation must be used to create the entry.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.402.1.1.14
wwpLeosTacacsClientAuthenticationServerEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.402.1.1.14.1
wwpLeosTacacsClientAuthenticationServerIndex
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
61-12 WWP-LEOS-TACACS-CLIENT-MIB
wwpLeosTacacsClientAuthenticationServerAddr
Description and OID
Status
Access
current
read-write
Status
Access
current
When wwpLeosTacacsClientAuthenticationServerAddr represents: Host
name : The resolved address is either the Ipv4 address or Ipv6 address. Ipv4
address : The resolved address is the same Ipv4 address. Ipv6 address : The
resolved address is the same Ipv6 address.
When the resolved address
represents: Ipv4 address :
wwpLeosTacacsClientAuthenticationServerResolvedAddr represents the
resolved Ipv4 address.
wwpLeosTacacsClientAuthenticationServerResolvedInetAddr used in
conjunction with
wwpLeosTacacsClientAuthenticationServerResolvedInetAddrType
represents the same Ipv4 address. Ipv6 address :
wwpLeosTacacsClientAuthenticationServerResolvedAddr represents 0.0.0.0.
wwpLeosTacacsClientAuthenticationServerResolvedInetAddr used in
conjunction with
wwpLeosTacacsClientAuthenticationServerResolvedInetAddrType
represents the Ipv6 address.
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.2
wwpLeosTacacsClientAuthenticationServerResolvedAddr
Description and OID
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.3
wwpLeosTacacsClientAuthenticationServerPriority
Description and OID
Status
Specifies the priority of TACACS servers configured on the device. This is the current
order in which the servers are accessed.
Access
read-write
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.4
wwpLeosTacacsClientAuthenticationServerAuthPort
Description and OID
Status
Access
read-write
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TACACS-CLIENT-MIB 61-13
wwpLeosTacacsClientAuthenticationServerAccessRequests
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.6
wwpLeosTacacsClientAuthenticationServerAccessRetransmissions
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The number of TACACS Access-Reject packets (valid or invalid) received from current
this server.
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.7
wwpLeosTacacsClientAuthenticationServerAccessAccepts
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.8
wwpLeosTacacsClientAuthenticationServerAccessRejects
Description and OID
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.9
wwpLeosTacacsClientAuthenticationServerMalformedAccessResponses
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
61-14 WWP-LEOS-TACACS-CLIENT-MIB
wwpLeosTacacsClientAuthenticationServerBadAuthenticators
Description and OID
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.11
wwpLeosTacacsClientAuthenticationServerPendingRequests
Description and OID
The number of TACACS Access-Request packets destined for this server that deprecated
have not yet timed out or received a response. This variable is incremented
when an Access-Request is sent and decremented due to receipt of an
Access-Accept, Access-Reject or Access-Challenge, a timeout or
retransmission.
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.12
wwpLeosTacacsClientAuthenticationServerTimeouts
Description and OID
Status
Access
The number of authentication timeouts to this server. After a timeout the client current
may retry to the same server, send to a different server, or give up. A retry to
the same server is counted as a retransmit as well as a timeout. A send to a
different server is counted as a Request as well as a timeout.
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.13
wwpLeosTacacsClientAuthenticationServerUnknownTypes
Description and OID
Status
Access
The number of TACACS packets of unknown type that were received from this current
server on the authentication port.
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.14
wwpLeosTacacsClientAuthenticationServerBadHeaderSequence
Description and OID
Status
Access
The number of TACACS packets that were received from this server on the
authentication port and dropped for some other reason.
current
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.15
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TACACS-CLIENT-MIB 61-15
wwpLeosTacacsClientAuthenticationServerStatus
Description and OID
Status
To create a row in this table, set this object to createAndGo(4). While creating current
an entry, the following objects must be specified:
wwpLeosTacacsClientAuthenticationServerStatus,
wwpLeosTacacsClientAuthenticationServerAddr. SNMP multiple set
operation must be used to create the entry. To disable a TACACS server, set
wwpLeosTacacsClientAuthenticationServerStatus object to 'notInService'.
Access
read-create
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.16
wwpLeosTacacsClientAuthenticationServerApplication
Description and OID
Status
Access
This object specifies how the TACACS server should be used for
authentication. Whether this TACACS server should be used for userLogin
authentication or dot1x authentication or both is decided by the value of this
object. Dot1x is not supported on all platforms.
current
read-create
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.17
wwpLeosTacacsClientAuthenticationServerClearStatistics
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.18
wwpLeosTacacsClientAuthenticationServerResolvedInetAddrType
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.19
MIB Reference
009-3220-011 Standard Revision A
August 2013
61-16 WWP-LEOS-TACACS-CLIENT-MIB
wwpLeosTacacsClientAuthenticationServerResolvedInetAddr
Description and OID
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.20
wwpLeosTacacsClientAuthorizationServerTable
Description and OID
current
Lists the possible TACACS servers. While creating an entry, the following
objects must be specified: wwpLeosTacacsClientAuthorizationServerStatus,
wwpLeosTacacsClientAuthorizationServerAddr. SNMP multiple set operation
must be used to create the entry.
not-accessible
1.3.6.1.4.1.6141.2.60.402.1.1.15
wwpLeosTacacsClientAuthorizationServerEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.402.1.1.15.1
wwpLeosTacacsClientAuthorizationServerIndex
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.1
wwpLeosTacacsClientAuthorizationServerAddr
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TACACS-CLIENT-MIB 61-17
wwpLeosTacacsClientAuthorizationServerResolvedAddr
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.3
wwpLeosTacacsClientAuthorizationServerPriority
Description and OID
Status
Specifies the priority of TACACS servers configured on the device. This is the current
order in which the servers are accessed.
Access
read-write
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.4
wwpLeosTacacsClientAuthorizationServerAuthPort
Description and OID
Status
current
The destination TCP port number to which TACACS messages should be
sent. The TACACS server is not used for authentication if this port number is
0.
Access
read-write
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.5
wwpLeosTacacsClientAuthorizationServerAccessRequests
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
61-18 WWP-LEOS-TACACS-CLIENT-MIB
wwpLeosTacacsClientAuthorizationServerAccessRetransmissions
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The number of TACACS Access-Reject packets (valid or invalid) received from current
this server.
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.7
wwpLeosTacacsClientAuthorizationServerAccessAccepts
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.8
wwpLeosTacacsClientAuthorizationServerAccessRejects
Description and OID
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.9
wwpLeosTacacsClientAuthorizationServerMalformedAccessResponses
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.10
wwpLeosTacacsClientAuthorizationServerBadAuthenticators
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TACACS-CLIENT-MIB 61-19
wwpLeosTacacsClientAuthorizationServerPendingRequests
Description and OID
Status
The number of TACACS Access-Request packets destined for this server that deprecated
have not yet timed out or received a response. This variable is incremented
when an Access-Request is sent and decremented due to receipt of an
Access-Accept, Access-Reject or Access-Challenge, a timeout or
retransmission.
Access
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.12
wwpLeosTacacsClientAuthorizationServerTimeouts
Description and OID
Status
Access
The number of authentication timeouts to this server. After a timeout the client current
may retry to the same server, send to a different server, or give up. A retry to
the same server is counted as a retransmit as well as a timeout. A send to a
different server is counted as a Request as well as a timeout.
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.13
wwpLeosTacacsClientAuthorizationServerUnknownTypes
Description and OID
Status
Access
The number of TACACS packets of unknown type that were received from this current
server on the authentication port.
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.14
wwpLeosTacacsClientAuthorizationServerBadHeaderSequence
Description and OID
Status
Access
The number of TACACS packets that were received from this server on the
authentication port and dropped for some other reason.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.15
wwpLeosTacacsClientAuthorizationServerStatus
Description and OID
To create a row in this table, set this object to createAndGo(4). While creating current
an entry, the following objects must be specified:
wwpLeosTacacsClientAuthorizationServerStatus,
wwpLeosTacacsClientAuthorizationServerAddr. SNMP multiple set operation
must be used to create the entry. To disable a TACACS server, set
wwpLeosTacacsClientAuthorizationServerStatus object to 'notInService'.
read-create
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.16
MIB Reference
009-3220-011 Standard Revision A
August 2013
61-20 WWP-LEOS-TACACS-CLIENT-MIB
wwpLeosTacacsClientAuthorizationServerApplication
Description and OID
Status
Access
This object specifies how the TACACS server should be used for
authentication. Whether this TACACS server should be used for userLogin
authentication or dot1x authentication or both is decided by the value of this
object. Dot1x is not supported on all platforms.
current
read-create
Status
Access
current
read-write
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.17
wwpLeosTacacsClientAuthorizationServerClearStatistics
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.18
wwpLeosTacacsClientAuthorizationServerResolvedInetAddrType
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.19
wwpLeosTacacsClientAuthorizationServerResolvedInetAddr
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.20
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TACACS-CLIENT-MIB 61-21
wwpLeosTacacsClientAccountingServerTable
Description and OID
Status
Lists the possible TACACS servers. While creating an entry, following objects current
must be specified: wwpLeosTacacsClientAccountingServerStatus,
wwpLeosTacacsClientAccountingServerAddr. SNMP multiple set operation
must be used to create the entry.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.402.1.1.16
wwpLeosTacacsClientAccountingServerEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.402.1.1.16.1
wwpLeosTacacsClientAccountingServerIndex
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.1
wwpLeosTacacsClientAccountingServerAddr
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
61-22 WWP-LEOS-TACACS-CLIENT-MIB
wwpLeosTacacsClientAccountingServerResolvedAddr
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.3
wwpLeosTacacsClientAccountingServerPriority
Description and OID
Status
Specifies the priority of TACACS servers configured on the device. This is the current
order in which the servers are accessed.
Access
read-write
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.4
wwpLeosTacacsClientAccountingServerAuthPort
Description and OID
Status
current
The destination TCP port number to which TACACS messages should be
sent. The TACACS server is not used for authentication if this port number is
0.
Access
read-write
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.5
wwpLeosTacacsClientAccountingServerAccessRequests
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TACACS-CLIENT-MIB 61-23
wwpLeosTacacsClientAccountingServerAccessRetransmissions
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The number of TACACS Access-Reject packets (valid or invalid) received from current
this server.
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.7
wwpLeosTacacsClientAccountingServerAccessAccepts
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.8
wwpLeosTacacsClientAccountingServerAccessRejects
Description and OID
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.9
wwpLeosTacacsClientAccountingServerMalformedAccessResponses
Description and OID
Status
Access
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.10
wwpLeosTacacsClientAccountingServerBadAuthenticators
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
61-24 WWP-LEOS-TACACS-CLIENT-MIB
wwpLeosTacacsClientAccountingServerPendingRequests
Description and OID
Status
Access
The number of TACACS Access-Request packets destined for this server that current
have not yet timed out or received a response. This variable is incremented
when an Access-Request is sent and decremented due to receipt of an
Access-Accept, Access-Reject or Access-Challenge, a timeout or
retransmission.
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.12
wwpLeosTacacsClientAccountingServerTimeouts
Description and OID
Status
Access
The number of authentication timeouts to this server. After a timeout the client current
may retry to the same server, send to a different server, or give up. A retry to
the same server is counted as a retransmit as well as a timeout. A send to a
different server is counted as a Request as well as a timeout.
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.13
wwpLeosTacacsClientAccountingServerUnknownTypes
Description and OID
Status
Access
The number of TACACS packets of unknown type that were received from this current
server on the authentication port.
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.14
wwpLeosTacacsClientAccountingServerBadHeaderSequence
Description and OID
Status
Access
The number of TACACS packets that were received from this server on the
authentication port and dropped for some other reason.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.15
wwpLeosTacacsClientAccountingServerStatus
Description and OID
To create a row in this table, set this object to createAndGo(4). While creating current
an entry, the following objects must be specified:
wwpLeosTacacsClientAccountingServerStatus,
wwpLeosTacacsClientAccountingServerAddr. SNMP multiple set operation
must be used to create the entry. To disable a TACACS server, set
wwpLeosTacacsClientAccountingServerStatus object to 'notInService'.
read-create
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.16
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TACACS-CLIENT-MIB 61-25
wwpLeosTacacsClientAccountingServerApplication
Description and OID
Status
Access
This object specifies how the TACACS server should be used for
authentication. Whether this TACACS server should be used for userLogin
authentication or dot1x authentication or both is decided by the value of this
object. Dot1x is not supported on all platforms.
current
read-create
Status
Access
current
read-write
Status
Access
current
Specifies the resolved IP address type. Used in conjunction with
wwpLeosTacacsClientAccountingServerResolvedInetAddr. When set to : ipv4
: wwpLeosTacacsClientAccountingServerResolvedInetAddr should
be
compliant with InetAddressIPv4 ipv6 :
wwpLeosTacacsClientAccountingServerResolvedInetAddr should
be
compliant with InetAddressIPv6.
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.17
wwpLeosTacacsClientAccountingServerClearStatistics
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.18
wwpLeosTacacsClientAccountingServerResolvedInetAddrType
Description and OID
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.19
wwpLeosTacacsClientAccountingServerResolvedInetAddr
Description and OID
Status
Access
current
Specifies the resolved IP address if
wwpLeosTacacsClientAccountingServerAddr is set to host name. If
wwpLeosTacacsClientAccountingServerAddr is set to IP address then
wwpLeosTacacsClientAccountingServerResolvedInetAddr contains the same
information as wwpLeosTacacsClientAccountingServerAddr. This OID is
used in conjunction with
wwpLeosTacacsClientAccountingServerResolvedInetAddrType.
read-only
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.20
wwpLeosTacacsClientAccountingSession
Description and OID
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.402.1.1.20
MIB Reference
009-3220-011 Standard Revision A
August 2013
61-26 WWP-LEOS-TACACS-CLIENT-MIB
wwpLeosTacacsClientAccountingCommand
Description and OID
Status
Access
current
read-write
Status
Access
deprecated
read-write
Status
Access
current
read-write
Status
Access
Setting this object sets the minimum length for TACACS secret key.
current
read-write
1.3.6.1.4.1.6141.2.60.402.1.1.21
wwpLeosTacacsClientGlobalServers
1.3.6.1.4.1.6141.2.60.402.1.1.22
wwpLeosTacacsClientSearchMethod
1.3.6.1.4.1.6141.2.60.402.1.1.23
wwpLeosTacacsClientKeyMinLen
1.3.6.1.4.1.6141.2.60.402.1.1.24
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
62-1
WWP-LEOS-TRAFFIC-PROFILE-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-TRAFFIC-PROFILE-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosTrafficProfileGlobalState
Description and OID
Status
Access
Setting this object to 'enabled' enables traffic profiling globally. Setting this
object to 'disabled' disables traffic profiling globally.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.27.1.1.1.1
wwpLeosTrafficProfileGlobalMeterProvisioningState
Description and OID
Setting this object to 'pir' allows meters to be provisioned in PIR. Setting this current
object to 'eir' allows meters to be provisioned in EIR.
read-write
1.3.6.1.4.1.6141.2.60.27.1.1.1.2
wwpLeosTrafficProfilePortTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.27.1.1.2
wwpLeosTrafficProfilePortEntry
1.3.6.1.4.1.6141.2.60.27.1.1.2.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
62-2 WWP-LEOS-TRAFFIC-PROFILE-MIB
wwpLeosTrafficProfilePort
Description and OID
Status
Access
This object specifies the port number and is also used as index in the table.
current
read-only
Status
Access
current
read-write
Status
Access
This object specifies operational state of the traffic profiling for a given port on current
the device.
read-only
1.3.6.1.4.1.6141.2.60.27.1.1.2.1.1
wwpLeosTrafficProfileAdminState
1.3.6.1.4.1.6141.2.60.27.1.1.2.1.2
wwpLeosTrafficProfileOperState
Description and OID
1.3.6.1.4.1.6141.2.60.27.1.1.2.1.3
wwpLeosTrafficProfileMode
Description and OID
Status
Access
This object specifies the mode of traffic profiling for a given port.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.27.1.1.2.1.4
wwpLeosTrafficProfileNonConformCascadedProfile
Description and OID
deprecated
This object specifies that the device should map non-conformance traffic
ingressing on a given port to the cascaded profile specified by
wwpLeosTrafficProfileNonConformCascadedProfile. This object becomes
effective only if the device is running in cascaded profile mode. This object sets
to drop
if used on a device that does not have cascaded-profiling.
read-write
1.3.6.1.4.1.6141.2.60.27.1.1.2.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TRAFFIC-PROFILE-MIB 62-3
wwpLeosTrafficProfileNonConformStdProfile
Description and OID
Status
Access
This object specifies that the device should map non-conformance traffic
ingressing on a given port to standard profile specified by
wwpLeosTrafficProfileNonConformStdProfile. This object becomes effective
only if the device is running in standard profile mode.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.27.1.1.2.1.6
wwpLeosTrafficProfileArpCascadedProfile
Description and OID
This object specifies that the device should map ARP frames ingressing on a deprecated
given port to cascaded profile specified by
wwpLeosTrafficProfileArpCascadedProfile. This object is set to bypass
if
used on a device that does not have cascaded-profiling.
read-write
1.3.6.1.4.1.6141.2.60.27.1.1.2.1.7
wwpLeosTrafficProfileArpStdProfile
Description and OID
Status
This object specifies that the device should map ARP frames ingressing on a current
given port to standard profile specified by wwpLeosTrafficProfileArpStdProfile.
This object becomes effective only if the device is running in standard profile
mode.
Access
read-write
1.3.6.1.4.1.6141.2.60.27.1.1.2.1.8
wwpLeosTrafficProfileMeterPool
Description and OID
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.27.1.1.2.1.9
wwpLeosTrafficProfileClassifierMode
Description and OID
This object specifies how narrow or wide traffic is classified to a port's meters. current
read-write
1.3.6.1.4.1.6141.2.60.27.1.1.2.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
62-4 WWP-LEOS-TRAFFIC-PROFILE-MIB
wwpLeosTrafficProfileCascadedTable
Description and OID
Status
Access
A table of cascaded traffic profile entries. To create an entry in this table, the
following criteria must be met: -All indexes must be specified. wwpLeosTrafficProfileCascadedCir must be specified. -If
wwpLeosTrafficProfileCascadedPir is not specified or is specified and is <
wwpLeosTrafficProfileCascadedCir then device sets
wwpLeosTrafficProfileCascadedPir to wwpLeosTrafficProfileCascadedCir wwpLeosTrafficProfileCascadedStatus must be set to 'createAndGo'.
deprecated
not-accessible
Status
Access
deprecated
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.27.1.1.3
wwpLeosTrafficProfileCascadedEntry
1.3.6.1.4.1.6141.2.60.27.1.1.3.1
wwpLeosTrafficProfileCascadedIndx
Description and OID
This object is an index in the table and it represents profile index which can be deprecated
1, 2 or 3.
read-only
1.3.6.1.4.1.6141.2.60.27.1.1.3.1.1
wwpLeosTrafficProfileCascadedCir
Description and OID
Status
Access
This object specifies the cir associated with a given cascaded traffic profile.
Units are kbps.
deprecated
read-write
Status
Access
This object specifies the pir associated with a given cascaded traffic profile.
Units are kbps.
deprecated
read-write
1.3.6.1.4.1.6141.2.60.27.1.1.3.1.2
wwpLeosTrafficProfileCascadedPir
1.3.6.1.4.1.6141.2.60.27.1.1.3.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TRAFFIC-PROFILE-MIB 62-5
wwpLeosTrafficProfileCascadedStatus
Description and OID
Status
deprecated
Setting this object to 'createAndGo' along with
wwpLeosTrafficProfileCascadedCir and wwpLeosTrafficProfileCascadedPir
results in creating a cascaded traffic profile entry. Setting this object to 'destroy'
deletes the entry from the table.
Access
read-create
1.3.6.1.4.1.6141.2.60.27.1.1.3.1.5
wwpLeosTrafficProfileStdTable
Description and OID
Status
A table of Std traffic profile entries. To create an entry in this table, the following current
criteria must be met: -All indexes must be specified. wwpLeosTrafficProfileStdCir must be specified. -If
wwpLeosTrafficProfileStdPir is not specified or is specified and is <
wwpLeosTrafficProfileStdCir then device sets wwpLeosTrafficProfileStdPir to
wwpLeosTrafficProfileStdCir. -wwpLeosTrafficProfileStdStatus must be set to
'createAndGo'.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.27.1.1.4
wwpLeosTrafficProfileStdEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
This object is used as index in the table and it represents profile index, which current
can be 1 through 64.
read-only
1.3.6.1.4.1.6141.2.60.27.1.1.4.1
wwpLeosTrafficProfileStdIndx
Description and OID
1.3.6.1.4.1.6141.2.60.27.1.1.4.1.1
wwpLeosTrafficProfileStdCir
Description and OID
Status
Access
This object specifies the cir associated with a given standard traffic profile.
current
read-write
1.3.6.1.4.1.6141.2.60.27.1.1.4.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
62-6 WWP-LEOS-TRAFFIC-PROFILE-MIB
wwpLeosTrafficProfileStdPir
Description and OID
Status
Access
This object specifies the pir associated with a given standard traffic profile.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.27.1.1.4.1.3
wwpLeosTrafficProfileStdName
Description and OID
The name associated with this profile. This must be unique per port. The name current
does not have to be set on create. However, when updating the name, it must
have some value - zero-string is not supported.
read-create
1.3.6.1.4.1.6141.2.60.27.1.1.4.1.4
wwpLeosTrafficProfileStdStatus
Description and OID
Status
current
Setting this object to 'createandgo' along with wwpLeosTrafficProfileStdCir
and or wwpLeosTrafficProfileStdPir results in creating a standard traffic profile
entry. Setting this object to 'destroy' deletes the entry from the table.
Access
read-create
1.3.6.1.4.1.6141.2.60.27.1.1.4.1.5
wwpLeosTrafficProfileStdVlan
Description and OID
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.27.1.1.4.1.6
wwpLeosTrafficProfileStdCbs
Description and OID
This object specifies the committed burst size associated with a given standard current
traffic profile.
read-write
1.3.6.1.4.1.6141.2.60.27.1.1.4.1.7
wwpLeosTrafficProfileStdEbs
Description and OID
Status
Access
This object specifies the excess burst size associated with a given standard
traffic profile.
current
read-write
1.3.6.1.4.1.6141.2.60.27.1.1.4.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TRAFFIC-PROFILE-MIB 62-7
wwpLeosTrafficProfileStdDscpRemarkPolicy
Description and OID
Status
Leave => Don't remark the frame. Fixed => Remark the DSCP of a frame with current
the fixed DSCP value for IP frames that classify to the traffic profile.
Access
read-write
1.3.6.1.4.1.6141.2.60.27.1.1.4.1.9
wwpLeosTrafficProfileStdFixedDscp
Description and OID
Status
Access
Fixed DSCP value to use for frames classifying to a traffic profile when the
dscp-remark-policy ID is 'Fixed'.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.27.1.1.4.1.10
wwpLeosTrafficProfileStdUnsetVlan
Description and OID
Setting this object to unset(1) unsets the VLAN associated with a profile. This current
object returns a value of none(0) on a get.
read-write
1.3.6.1.4.1.6141.2.60.27.1.1.4.1.11
wwpLeosTrafficProfileStdDefaultProfile
Description and OID
Status
Access
current
read-create
Status
Access
Setting this value to true causes metering to end and all traffic to drop.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.27.1.1.4.1.12
wwpLeosTrafficeProfileStdDrop
1.3.6.1.4.1.6141.2.60.27.1.1.4.1.13
wwpLeosTrafficProfileStdParentIndex
Description and OID
This object is set when creating a child traffic profile to specify the parent index. current
read-create
1.3.6.1.4.1.6141.2.60.27.1.1.4.1.14
MIB Reference
009-3220-011 Standard Revision A
August 2013
62-8 WWP-LEOS-TRAFFIC-PROFILE-MIB
wwpLeosTrafficProfileStdChildMode
Description and OID
Status
Access
When the port mode is hierarchical-vlan, the valid child-modes are dot1dPri,
ipprec, and dscp. When the port mode is hierarchical-port, the valid
childModes are dot1dPri, ipprec, dscp and vlan(4).
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.27.1.1.4.1.15
wwpLeosTrafficProfileStdStatsMonitor
Description and OID
To disable stats collection, set this object to off(2). To enable stats collection, current
set this object to on(1).
read-write
1.3.6.1.4.1.6141.2.60.27.1.1.4.1.16
wwpLeosTrafficProfileStdUntaggedState
Description and OID
Status
To enable this profile to match untagged traffic set this to on(1). To disable, set current
to off(2)
Access
read-write
1.3.6.1.4.1.6141.2.60.27.1.1.4.1.17
wwpLeosTrafficProfileStdVs
Description and OID
Status
Access
The virtual-switch name associated with this profile. The virtual-switch name
must exist before using it as a profile classifier.
current
read-create
Status
Access
This sets the profile's color remarking policy at the meter output.
current
read-write
Status
Access
This sets the profile's rcos remarking policy based on meter color.
current
read-write
1.3.6.1.4.1.6141.2.60.27.1.1.4.1.18
wwpLeosTrafficProfileStdRemarkColorPolicy
1.3.6.1.4.1.6141.2.60.27.1.1.4.1.19
wwpLeosTrafficProfileStdRemarkRcosPolicy
1.3.6.1.4.1.6141.2.60.27.1.1.4.1.20
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TRAFFIC-PROFILE-MIB 62-9
wwpLeosTrafficProfileStdYellowRemarkRcos
Description and OID
Status
Access
This sets the profile's rcos remarking policy based on meter color.
current
read-write
Status
Access
This sets the profile's rcos remarking policy based on meter color.
current
read-write
Status
Access
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.27.1.1.4.1.21
wwpLeosTrafficProfileStdGreenRemarkRcos
1.3.6.1.4.1.6141.2.60.27.1.1.4.1.22
wwpLeosTrafficProfileStdIngressColorAware
1.3.6.1.4.1.6141.2.60.27.1.1.4.1.23
wwpLeosTrafficProfileStdEir
Description and OID
current
This object specifies the eir associated with a given standard traffic profile.
Sets/Gets on this are only valid when the global meter-provisioning mode is set
to EIR. All other times it is ignored and a 0 is returned.
read-write
1.3.6.1.4.1.6141.2.60.27.1.1.4.1.24
wwpLeosTrafficProfileStdDot1dTable
Description and OID
Status
A table of Std dot1d traffic profile entries. To create an entry in the table, the current
following criteria must be met: -set wwpLeosTrafficProfileStdDot1dStatus to
'createAndGo'. -set wwpLeosTrafficProfileStdDot1dToProfile to a valid profile.
To delete entry, set wwpLeosTrafficProfileStdDot1dStatus to 'destroy'.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.27.1.1.5
wwpLeosTrafficProfileStdDot1dEntry
Description and OID
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.27.1.1.5.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
62-10 WWP-LEOS-TRAFFIC-PROFILE-MIB
wwpLeosTrafficProfileStdDot1d
Description and OID
Status
Access
This object specifies the dot1d priority for the associated standard profile entry current
in the wwpLeosTrafficProfileStdDot1dTable.
read-only
1.3.6.1.4.1.6141.2.60.27.1.1.5.1.1
wwpLeosTrafficProfileStdDot1dToProfile
Description and OID
Status
Access
read-write
1.3.6.1.4.1.6141.2.60.27.1.1.5.1.2
wwpLeosTrafficProfileStdDot1dStatus
Description and OID
Status
current
To create an entry in the table, the following criteria must be met: - set
wwpLeosTrafficProfileStdDot1dStatus to 'createAndGo'. - set
wwpLeosTrafficProfileStdDot1dToProfile to a valid profile. To delete entry, set
wwpLeosTrafficProfileStdDot1dStatus to 'destroy'.
Access
read-create
1.3.6.1.4.1.6141.2.60.27.1.1.5.1.3
wwpLeosTrafficProfileStdIpPrecTable
Description and OID
Status
Access
not-accessible
1.3.6.1.4.1.6141.2.60.27.1.1.6
wwpLeosTrafficProfileStdIpPrecEntry
Description and OID
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.27.1.1.6.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TRAFFIC-PROFILE-MIB 62-11
wwpLeosTrafficProfileStdIpPrec
Description and OID
Status
Access
This object specifies the ip precedence for the associated standard profile
entry in wwpLeosTrafficProfileStdTable.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.27.1.1.6.1.1
wwpLeosTrafficProfileStdIpPrecToProfile
Description and OID
read-write
1.3.6.1.4.1.6141.2.60.27.1.1.6.1.2
wwpLeosTrafficProfileStdIpPrecStatus
Description and OID
Status
current
To create an entry in the table, the following criteria must be met: -set
wwpLeosTrafficProfileStdIpPrecStatus to 'createAndGo'. -set
wwpLeosTrafficProfileStdIpPrecToProfile to a valid profile. To delete an entry
set wwpLeosTrafficProfileStdIpPrecStatus to 'destroy'.
Access
read-create
1.3.6.1.4.1.6141.2.60.27.1.1.6.1.3
wwpLeosTrafficProfileStdPhbTable
Description and OID
Status
A table of standard phb traffic profile entries. To create an entry in the table, current
the following criteria must be met: -set wwpLeosTrafficProfileStdPhbStatus to
'createAndGo'. -set wwpLeosTrafficProfileStdPhbToProfile to a valid profile.
To delete entry, set wwpLeosTrafficProfileStdPhbStatus to 'destroy'.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.27.1.1.7
wwpLeosTrafficProfileStdPhbEntry
Description and OID
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.27.1.1.7.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
62-12 WWP-LEOS-TRAFFIC-PROFILE-MIB
wwpLeosTrafficProfileStdPhb
Description and OID
Status
Access
This object specifies the diff-serv values for the associated standard profile
entry in wwpLeosTrafficProfileStdTable.
current
read-only
Status
Access
current
read-write
Status
Access
To create an entry in the table, the following criteria must be met: -set
wwpLeosTrafficProfileStdPhbStatus to 'createAndGo'. -set
wwpLeosTrafficProfileStdPhbToProfile to a valid profile. To delete entry, set
wwpLeosTrafficProfileStdPhbStatus to 'destroy'.
current
read-create
Status
Access
deprecated
not-accessible
Status
Access
deprecated
not-accessible
Status
Access
This object specifies the higher bytes of accepted frames of the given
cascaded profile.
deprecated
read-only
1.3.6.1.4.1.6141.2.60.27.1.1.7.1.1
wwpLeosTrafficProfileStdPhbToProfile
1.3.6.1.4.1.6141.2.60.27.1.1.7.1.2
wwpLeosTrafficProfileStdPhbStatus
1.3.6.1.4.1.6141.2.60.27.1.1.7.1.3
wwpLeosTrafficProfileCascadedStatsTable
1.3.6.1.4.1.6141.2.60.27.1.1.8
wwpLeosTrafficProfileCascadedStatsEntry
1.3.6.1.4.1.6141.2.60.27.1.1.8.1
wwpLeosTrafficProfileCascadedAcceptedBytesHi
1.3.6.1.4.1.6141.2.60.27.1.1.8.1.1
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TRAFFIC-PROFILE-MIB 62-13
wwpLeosTrafficProfileCascadedAcceptedBytesLo
Description and OID
Status
This object specifies the lower bytes of accepted frames of the given cascaded deprecated
profile.
Access
read-only
1.3.6.1.4.1.6141.2.60.27.1.1.8.1.2
wwpLeosTrafficProfileCascadedDroppedBytesHi
Description and OID
Status
This object specifies the higher bytes of dropped frames of the given cascaded deprecated
profile.
Access
read-only
1.3.6.1.4.1.6141.2.60.27.1.1.8.1.3
wwpLeosTrafficProfileCascadedDroppedBytesLo
Description and OID
Status
This object specifies the lower bytes of dropped frames of the given cascaded deprecated
profile.
Access
read-only
1.3.6.1.4.1.6141.2.60.27.1.1.8.1.4
wwpLeosTrafficProfileCascadedRemarkedBytesHi
Description and OID
Status
Access
This object specifies the higher bytes of remarked frames of the given
cascaded profile.
deprecated
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.27.1.1.8.1.5
wwpLeosTrafficProfileCascadedRemarkedBytesLo
Description and OID
This object specifies the lower bytes of remarked frames of the given cascaded deprecated
profile.
read-only
1.3.6.1.4.1.6141.2.60.27.1.1.8.1.6
wwpLeosTrafficProfileStdStatsTable
Description and OID
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.27.1.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
62-14 WWP-LEOS-TRAFFIC-PROFILE-MIB
wwpLeosTrafficProfileStdStatsEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
This object specifies the higher bytes of accepted frames of the given standard current
profile.
read-only
1.3.6.1.4.1.6141.2.60.27.1.1.9.1
wwpLeosTrafficProfileStdAcceptedBytesHi
Description and OID
1.3.6.1.4.1.6141.2.60.27.1.1.9.1.1
wwpLeosTrafficProfileStdAcceptedBytesLo
Description and OID
Status
Access
This object specifies the lower bytes of accepted frames of the given standard current
profile.
read-only
1.3.6.1.4.1.6141.2.60.27.1.1.9.1.2
wwpLeosTrafficProfileStdDroppedBytesHi
Description and OID
Status
Access
This object specifies the higher bytes of dropped frames of the given standard current
profile.
read-only
1.3.6.1.4.1.6141.2.60.27.1.1.9.1.3
wwpLeosTrafficProfileStdDroppedBytesLo
Description and OID
Status
Access
This object specifies the higher bytes of dropped frames of the given standard current
profile.
read-only
1.3.6.1.4.1.6141.2.60.27.1.1.9.1.4
wwpLeosTrafficProfileStdHCAcceptedBytes
Description and OID
Status
Access
This object specifies the bytes of accepted frame data of the given standard
profile.
current
read-only
1.3.6.1.4.1.6141.2.60.27.1.1.9.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TRAFFIC-PROFILE-MIB 62-15
wwpLeosTrafficProfileStdHCDroppedBytes
Description and OID
Status
Access
This object specifies the bytes of dropped frame data by a given standard
profile.
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.27.1.1.9.1.6
wwpLeosTrafficProfileStdHCAcceptedPackets
1.3.6.1.4.1.6141.2.60.27.1.1.9.1.7
wwpLeosTrafficProfileStdHCDroppedPackets
1.3.6.1.4.1.6141.2.60.27.1.1.9.1.8
wwpLeosTrafficProfileCascadedGlobalTable
Description and OID
A table of global attributes used by cascaded traffic profile table. To create an deprecated
entry in this table, the following criteria must be met: -All indexes must be
specified. wwpLeosTrafficProfileCascadedGlobalDot1d,wwpLeosTrafficProfileCascade
dGlobalIpPrec and wwpLeosTrafficProfileCascadedGlobalDscp may be
specified. -wwpLeosTrafficProfileCascadedGlobalName may be specified. wwpLeosTrafficProfileCascadedGlobalStatus must be set to 'createAndGo'.
not-accessible
1.3.6.1.4.1.6141.2.60.27.1.1.10
wwpLeosTrafficProfileCascadedGlobalEntry
Description and OID
Status
Access
deprecated
not-accessible
1.3.6.1.4.1.6141.2.60.27.1.1.10.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
62-16 WWP-LEOS-TRAFFIC-PROFILE-MIB
wwpLeosTrafficProfileCascadedGlobalDot1d
Description and OID
Status
This specifies the dot1d priority for a given cascaded traffic profile. If this object deprecated
returns -1 then the value was not set by user and is ignored.
Access
read-write
1.3.6.1.4.1.6141.2.60.27.1.1.10.1.1
wwpLeosTrafficProfileCascadedGlobalIpPrec
Description and OID
Status
Access
This specifies the ip precedence value for a given cascaded traffic profile. If
this object returns -1 then the value was not set by user and is ignored.
deprecated
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.27.1.1.10.1.2
wwpLeosTrafficProfileCascadedGlobalDscp
Description and OID
This specifies the DSCP value for a given cascaded traffic profile. If this object deprecated
returns -1 then the value was not set by user and is ignored.
read-write
1.3.6.1.4.1.6141.2.60.27.1.1.10.1.3
wwpLeosTrafficProfileCascadedGlobalName
Description and OID
Status
The name associated with this profile. This must be a unique name per profile. deprecated
The name does not have to be set on create. However, when updating the
name, it must have some value - zero-string is not supported.
Access
read-write
1.3.6.1.4.1.6141.2.60.27.1.1.10.1.4
wwpLeosTrafficProfileCascadedGlobalStatus
Description and OID
Status
Setting this object to 'createandgo' will result in creating an global cascaded deprecated
traffic profile entry. Setting this object to 'destroy' will delete the entry from the
table.
Access
read-create
1.3.6.1.4.1.6141.2.60.27.1.1.10.1.5
wwpLeosTrafficProfileCascadedTotalStatsTable
Description and OID
Status
Access
deprecated
not-accessible
1.3.6.1.4.1.6141.2.60.27.1.1.11
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TRAFFIC-PROFILE-MIB 62-17
wwpLeosTrafficProfileCascadedTotalStatsEntry
Description and OID
Status
Access
deprecated
not-accessible
Status
Access
This object specifies the higher bytes of accepted frames of the given
cascaded profile.
deprecated
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.27.1.1.11.1
wwpLeosTrafficProfileCascadedTotalAcceptedBytesHi
1.3.6.1.4.1.6141.2.60.27.1.1.11.1.1
wwpLeosTrafficProfileCascadedTotalAcceptedBytesLo
Description and OID
This object specifies the lower bytes of accepted frames of the given cascaded deprecated
profile.
read-only
1.3.6.1.4.1.6141.2.60.27.1.1.11.1.2
wwpLeosTrafficProfileCascadedTotalDroppedBytesHi
Description and OID
Status
This object specifies the higher bytes of dropped frames of the given cascaded deprecated
profile.
Access
read-only
1.3.6.1.4.1.6141.2.60.27.1.1.11.1.3
wwpLeosTrafficProfileCascadedTotalDroppedBytesLo
Description and OID
Status
This object specifies the lower bytes of dropped frames of the given cascaded deprecated
profile.
Access
read-only
1.3.6.1.4.1.6141.2.60.27.1.1.11.1.4
wwpLeosTrafficProfileCascadedTotalRemarkedBytesHi
Description and OID
Status
Access
This object specifies the higher bytes of remarked frames of the given
cascaded profile.
deprecated
read-only
1.3.6.1.4.1.6141.2.60.27.1.1.11.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
62-18 WWP-LEOS-TRAFFIC-PROFILE-MIB
wwpLeosTrafficProfileCascadedTotalRemarkedBytesLo
Description and OID
Status
This object specifies the lower bytes of remarked frames of the given cascaded deprecated
profile.
Access
read-only
1.3.6.1.4.1.6141.2.60.27.1.1.11.1.6
wwpLeosTrafficProfileStdTotalStatsTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This object specifies the higher bytes of accepted frames of the given standard current
profile.
read-only
1.3.6.1.4.1.6141.2.60.27.1.1.12
wwpLeosTrafficProfileStdTotalStatsEntry
1.3.6.1.4.1.6141.2.60.27.1.1.12.1
wwpLeosTrafficProfileStdTotalAcceptedBytesHi
Description and OID
1.3.6.1.4.1.6141.2.60.27.1.1.12.1.1
wwpLeosTrafficProfileStdTotalAcceptedBytesLo
Description and OID
Status
Access
This object specifies the lower bytes of accepted frames of the given standard current
profile.
read-only
1.3.6.1.4.1.6141.2.60.27.1.1.12.1.2
wwpLeosTrafficProfileStdTotalDroppedBytesHi
Description and OID
Status
Access
This object specifies the higher bytes of dropped frames of the given standard current
profile.
read-only
1.3.6.1.4.1.6141.2.60.27.1.1.12.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TRAFFIC-PROFILE-MIB 62-19
wwpLeosTrafficProfileStdTotalDroppedBytesLo
Description and OID
Status
Access
This object specifies the higher bytes of dropped frames of the given standard current
profile.
read-only
1.3.6.1.4.1.6141.2.60.27.1.1.12.1.4
wwpLeosTrafficProfileStdVlanTable
Description and OID
Status
A table of standard VLAN traffic profile entries. To create an entry in the table, current
the following criteria must be met: -set wwpLeosTrafficProfileStdVlanStatus to
'createAndGo'. -set wwpLeosTrafficProfileStdVlan to a valid profile. To delete
entry, set wwpLeosTrafficProfileStdVlanStatus to 'destroy'.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.27.1.1.14
wwpLeosTrafficProfileStdVlanEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
This object specifies the Vlan for the associated standard profile entry in
wwpLeosTrafficProfileStdTable.
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.27.1.1.14.1
wwpLeosTrafficProfileStdVlanIndex
1.3.6.1.4.1.6141.2.60.27.1.1.14.1.1
wwpLeosTrafficProfileStdVlanToProfile
Description and OID
read-create
1.3.6.1.4.1.6141.2.60.27.1.1.14.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
62-20 WWP-LEOS-TRAFFIC-PROFILE-MIB
wwpLeosTrafficProfileStdVlanStatus
Description and OID
Status
Access
To create an entry in the table, the following criteria must be met: -set
wwpLeosTrafficProfileStdVlanStatus to 'createAndGo'. -set
wwpLeosTrafficProfileStdVlanToProfile to a valid profile. To delete entry, set
wwpLeosTrafficProfileStdVlanStatus to 'destroy'.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.27.1.1.14.1.3
wwpLeosTrafficProfileStdDscpTable
Description and OID
A table of standard DSCP traffic profile entries. To create an entry in the table, current
the following criteria must be met: -set wwpLeosTrafficProfileStdDscpStatus to
'createAndGo'. -set wwpLeosTrafficProfileStdDscpToProfile to a valid profile.
To delete entry, set wwpLeosTrafficProfileStdDscpStatus to 'destroy'.
not-accessible
1.3.6.1.4.1.6141.2.60.27.1.1.15
wwpLeosTrafficProfileStdDscpEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
This object specifies the DSCP for the associated standard profile entry in
wwpLeosTrafficProfileStdTable.
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.27.1.1.15.1
wwpLeosTrafficProfileStdDscp
1.3.6.1.4.1.6141.2.60.27.1.1.15.1.1
wwpLeosTrafficProfileStdDscpToProfile
Description and OID
read-create
1.3.6.1.4.1.6141.2.60.27.1.1.15.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TRAFFIC-PROFILE-MIB 62-21
wwpLeosTrafficProfileStdDscpStatus
Description and OID
Status
current
To create an entry in the table following criteria must be met: -set
wwpLeosTrafficProfileStdDscpStatus to 'createAndGo'. -set
wwpLeosTrafficProfileStdDscpToProfile to a valid profile. To delete entry, set
wwpLeosTrafficProfileStdDscpStatus to 'destroy'.
Access
read-create
1.3.6.1.4.1.6141.2.60.27.1.1.15.1.3
wwpLeosTrafficProfileMeterPoolTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.27.1.1.16
wwpLeosTrafficProfileMeterPoolEntry
1.3.6.1.4.1.6141.2.60.27.1.1.16.1
wwpLeosTrafficProfileMeterPoolIndex
1.3.6.1.4.1.6141.2.60.27.1.1.16.1.1
wwpLeosTrafficProfileMeterPoolName
1.3.6.1.4.1.6141.2.60.27.1.1.16.1.2
wwpLeosTrafficProfileMeterPoolNumOfMeters
1.3.6.1.4.1.6141.2.60.27.1.1.16.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
62-22 WWP-LEOS-TRAFFIC-PROFILE-MIB
wwpLeosTrafficProfileMeterPoolMetersUsed
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.27.1.1.16.1.4
wwpLeosTrafficProfileMeterPoolNumOfStats
1.3.6.1.4.1.6141.2.60.27.1.1.16.1.5
wwpLeosTrafficProfileMeterPoolStatsUsed
1.3.6.1.4.1.6141.2.60.27.1.1.16.1.6
wwpLeosTrafficProfileMeterPoolNumOfClassifiers
1.3.6.1.4.1.6141.2.60.27.1.1.16.1.7
wwpLeosTrafficProfileMeterPoolClassifiersUsed
1.3.6.1.4.1.6141.2.60.27.1.1.16.1.8
wwpLeosTrafficProfileTosStampTable
1.3.6.1.4.1.6141.2.60.27.1.1.20
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TRAFFIC-PROFILE-MIB 62-23
wwpLeosTrafficProfileTosStampEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-write
Status
Access
This object specifies the value of the TOS Stamp. For IP prec, left shift the
value by 3 bits.
current
read-write
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This object specifies the state of the Ipp0 or cs0 enable/disable on a port.
current
read-write
1.3.6.1.4.1.6141.2.60.27.1.1.20.1
wwpLeosTrafficProfileTosStampState
1.3.6.1.4.1.6141.2.60.27.1.1.20.1.1
wwpLeosTrafficProfileTosStampValue
1.3.6.1.4.1.6141.2.60.27.1.1.20.1.2
wwpLeosTrafficProfileIpDscpTable
1.3.6.1.4.1.6141.2.60.27.1.1.21
wwpLeosTrafficProfileIpDscpEntry
1.3.6.1.4.1.6141.2.60.27.1.1.21.1
wwpLeosTrafficProfileIpp0Cs0State
1.3.6.1.4.1.6141.2.60.27.1.1.21.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
62-24 WWP-LEOS-TRAFFIC-PROFILE-MIB
wwpLeosTrafficProfileIpp1Cs1State
Description and OID
Status
Access
This object specifies the state of the Ipp1 or cs1 enable/disable on a port.
current
read-write
Status
Access
This object specifies the state of the Ipp2 or cs2 enable/disable on a port.
current
read-write
Status
Access
This object specifies the state of the Ipp3 or cs3 enable/disable on a port.
current
read-write
Status
Access
This object specifies the state of the Ipp4 or cs4 enable/disable on a port.
current
read-write
Status
Access
This object specifies the state of the Ipp5 or cs5 enable/disable on a port.
current
read-write
Status
Access
This object specifies the state of the Ipp6 or cs6 enable/disable on a port.
current
read-write
1.3.6.1.4.1.6141.2.60.27.1.1.21.1.2
wwpLeosTrafficProfileIpp2Cs2State
1.3.6.1.4.1.6141.2.60.27.1.1.21.1.3
wwpLeosTrafficProfileIpp3Cs3State
1.3.6.1.4.1.6141.2.60.27.1.1.21.1.4
wwpLeosTrafficProfileIpp4Cs4State
1.3.6.1.4.1.6141.2.60.27.1.1.21.1.5
wwpLeosTrafficProfileIpp5Cs5State
1.3.6.1.4.1.6141.2.60.27.1.1.21.1.6
wwpLeosTrafficProfileIpp6Cs6State
1.3.6.1.4.1.6141.2.60.27.1.1.21.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TRAFFIC-PROFILE-MIB 62-25
wwpLeosTrafficProfileIpp7Cs7State
Description and OID
Status
Access
This object specifies the state of the Ipp7 or cs7 enable/disable on a port.
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.27.1.1.21.1.8
wwpLeosTrafficProfileAf1State
1.3.6.1.4.1.6141.2.60.27.1.1.21.1.9
wwpLeosTrafficProfileAf2State
1.3.6.1.4.1.6141.2.60.27.1.1.21.1.10
wwpLeosTrafficProfileAf3State
1.3.6.1.4.1.6141.2.60.27.1.1.21.1.11
wwpLeosTrafficProfileAf4State
1.3.6.1.4.1.6141.2.60.27.1.1.21.1.12
wwpLeosTrafficProfileEfState
1.3.6.1.4.1.6141.2.60.27.1.1.21.1.13
MIB Reference
009-3220-011 Standard Revision A
August 2013
62-26 WWP-LEOS-TRAFFIC-PROFILE-MIB
wwpLeosTrafficProfileStdVlanDot1dTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
To create an entry in the table, the following criteria must be met: - set
wwpLeosTrafficProfileStdDot1dStatus to 'createAndGo'. To delete entry, set
wwpLeosTrafficProfileStdDot1dStatus to 'destroy'.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.27.1.1.40
wwpLeosTrafficProfileStdVlanDot1dEntry
1.3.6.1.4.1.6141.2.60.27.1.1.40.1
wwpLeosTrafficProfileStdVlanDot1dStatus
1.3.6.1.4.1.6141.2.60.27.1.1.40.1.1
wwpLeosTrafficProfileStdVlanIpPrecTable
Description and OID
not-accessible
1.3.6.1.4.1.6141.2.60.27.1.1.41
wwpLeosTrafficProfileStdVlanIpPrecEntry
Description and OID
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.27.1.1.41.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TRAFFIC-PROFILE-MIB 62-27
wwpLeosTrafficProfileStdVlanIpPrecStatus
Description and OID
Status
Access
To create an entry in the table, the following criteria must be met: - set
wwpLeosTrafficProfileStdVlanIpPrecStatus to 'createAndGo'.
To delete
entry, set wwpLeosTrafficProfileStdVlanIpPrecStatus to 'destroy'.
current
read-create
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
To create an entry in the table, the following criteria must be met: - set
wwpLeosTrafficProfileStdVlanDscpStatus to 'createAndGo'. To delete entry,
set wwpLeosTrafficProfileStdVlanDscpStatus to 'destroy'.
current
read-create
1.3.6.1.4.1.6141.2.60.27.1.1.41.1.1
wwpLeosTrafficProfileStdVlanDscpTable
1.3.6.1.4.1.6141.2.60.27.1.1.42
wwpLeosTrafficProfileStdVlanDscpEntry
1.3.6.1.4.1.6141.2.60.27.1.1.42.1
wwpLeosTrafficProfileStdVlanDscpStatus
1.3.6.1.4.1.6141.2.60.27.1.1.42.1.2
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
63-1
WWP-LEOS-TWAMP-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-TWAMP-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosTwampPort
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.40.1.1.1.1
wwpLeosTwampEnable
1.3.6.1.4.1.6141.2.60.40.1.1.1.2
wwpLeosTwampPortEnableTable
1.3.6.1.4.1.6141.2.60.40.1.1.1.3
wwpLeosTwampPortEnableEntry
1.3.6.1.4.1.6141.2.60.40.1.1.1.3.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
63-2 WWP-LEOS-TWAMP-MIB
wwpLeosTwampPortId
Description and OID
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.40.1.1.1.3.1.1
wwpLeosTwampPortEnableState
Description and OID
Setting this object enables or disables TWAMP messaging on the given port. current
read-write
1.3.6.1.4.1.6141.2.60.40.1.1.1.3.1.2
wwpLeosTwampClientEnable
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.40.1.1.1.4
wwpLeosTwampServerEnable
1.3.6.1.4.1.6141.2.60.40.1.1.1.5
wwpLeosTwampLightEnable
1.3.6.1.4.1.6141.2.60.40.1.1.1.6
wwpLeosTwampServerSessionsTable
1.3.6.1.4.1.6141.2.60.40.1.1.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TWAMP-MIB 63-3
wwpLeosTwampServerSessionEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.40.1.1.1.7.1
wwpLeosTwampServerSessionId
1.3.6.1.4.1.6141.2.60.40.1.1.1.7.1.1
wwpLeosTwampServerSessionState
1.3.6.1.4.1.6141.2.60.40.1.1.1.7.1.2
wwpLeosTwampServerSessionPort
1.3.6.1.4.1.6141.2.60.40.1.1.1.7.1.3
wwpLeosTwampServerSessionHost
1.3.6.1.4.1.6141.2.60.40.1.1.1.7.1.4
wwpLeosTwampServerSessionNumPkts
1.3.6.1.4.1.6141.2.60.40.1.1.1.7.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
63-4 WWP-LEOS-TWAMP-MIB
wwpLeosTwampServerSessionSeqNum
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-write
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.40.1.1.1.7.1.6
wwpLeosTwampServerSessionHwAssist
1.3.6.1.4.1.6141.2.60.40.1.1.1.7.1.7
wwpLeosTwampTimeout
1.3.6.1.4.1.6141.2.60.40.1.1.1.8
wwpLeosTwampClientSessionsTable
1.3.6.1.4.1.6141.2.60.40.1.1.1.9
wwpLeosTwampClientSessionEntry
1.3.6.1.4.1.6141.2.60.40.1.1.1.9.1
wwpLeosTwampClientSessionId
1.3.6.1.4.1.6141.2.60.40.1.1.1.9.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TWAMP-MIB 63-5
wwpLeosTwampClientSessionStatus
Description and OID
Status
Access
read-write
1.3.6.1.4.1.6141.2.60.40.1.1.1.9.1.2
wwpLeosTwampClientSessionName
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.40.1.1.1.9.1.3
wwpLeosTwampClientSessionHost
1.3.6.1.4.1.6141.2.60.40.1.1.1.9.1.4
wwpLeosTwampClientSessionState
1.3.6.1.4.1.6141.2.60.40.1.1.1.9.1.5
wwpLeosTwampClientSessionCommPort
1.3.6.1.4.1.6141.2.60.40.1.1.1.9.1.6
wwpLeosTwampClientSessionCosPolicy
1.3.6.1.4.1.6141.2.60.40.1.1.1.9.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
63-6 WWP-LEOS-TWAMP-MIB
wwpLeosTwampClientSessionDscp
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.40.1.1.1.9.1.8
wwpLeosTwampClientSessionIpPrec
1.3.6.1.4.1.6141.2.60.40.1.1.1.9.1.9
wwpLeosTwampClientSessionType
1.3.6.1.4.1.6141.2.60.40.1.1.1.9.1.10
wwpLeosTwampClientSessionPktSize
1.3.6.1.4.1.6141.2.60.40.1.1.1.9.1.11
wwpLeosTwampClientSessionRepeat
1.3.6.1.4.1.6141.2.60.40.1.1.1.9.1.12
wwpLeosTwampClientSessionSeqNum
1.3.6.1.4.1.6141.2.60.40.1.1.1.9.1.13
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TWAMP-MIB 63-7
wwpLeosTwampClientSessionNumPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-write
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.40.1.1.1.9.1.14
wwpLeosTwampClientSessionRxHw
1.3.6.1.4.1.6141.2.60.40.1.1.1.9.1.15
wwpLeosTwampClientSessionTxHw
1.3.6.1.4.1.6141.2.60.40.1.1.1.9.1.16
wwpLeosTwampClientSessionDot1dpri
1.3.6.1.4.1.6141.2.60.40.1.1.1.9.1.17
wwpLeosTwampClientSessionsStatisticsTable
1.3.6.1.4.1.6141.2.60.40.1.1.1.11
wwpLeosTwampClientSessionStatisticsEntry
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
63-8 WWP-LEOS-TWAMP-MIB
wwpLeosTwampClientSessionStatsIndex
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
The time at which this statistics record was generated - Unix epoch seconds. current
read-only
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.1
wwpLeosTwampClientStatsRecordIndex
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.2
wwpLeosTwampClientSessionStatsName
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.3
wwpLeosTwampClientSessionTimestamp
Description and OID
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.4
wwpLeosTwampClientSessionStatsPktTx
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.5
wwpLeosTwampClientSessionStatsPktRx
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TWAMP-MIB 63-9
wwpLeosTwampClientSessionStatsPktOL
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.7
wwpLeosTwampClientSessionStatsPktRL
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.8
wwpLeosTwampClientSessionStatsRTMin
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.9
wwpLeosTwampClientSessionStatsRTMax
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.10
wwpLeosTwampClientSessionStatsRTMean
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.11
wwpLeosTwampClientSessionStatsRTStdDev
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
63-10 WWP-LEOS-TWAMP-MIB
wwpLeosTwampClientSessionStatsRT95th
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.13
wwpLeosTwampClientSessionStatsRT99pt9th
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.14
wwpLeosTwampClientSessionStatsOWOMin
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.15
wwpLeosTwampClientSessionStatsOWOMax
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.16
wwpLeosTwampClientSessionStatsOWOMean
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.17
wwpLeosTwampClientSessionStatsOWOStdDev
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.18
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TWAMP-MIB 63-11
wwpLeosTwampClientSessionStatsOWO95th
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.19
wwpLeosTwampClientSessionStatsOWO99pt9th
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.20
wwpLeosTwampClientSessionStatsOWBMin
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.21
wwpLeosTwampClientSessionStatsOWBMax
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.22
wwpLeosTwampClientSessionStatsOWBMean
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.23
wwpLeosTwampClientSessionStatsOWBStdDev
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.24
MIB Reference
009-3220-011 Standard Revision A
August 2013
63-12 WWP-LEOS-TWAMP-MIB
wwpLeosTwampClientSessionStatsOWB95th
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.25
wwpLeosTwampClientSessionStatsOWB99pt9th
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.26
wwpLeosTwampClientSessionStatsTPMin
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.27
wwpLeosTwampClientSessionStatsTPMax
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.28
wwpLeosTwampClientSessionStatsTPMean
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.29
wwpLeosTwampClientSessionStatsTPStdDev
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.30
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TWAMP-MIB 63-13
wwpLeosTwampClientSessionStatsTP95th
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.31
wwpLeosTwampClientSessionStatsTP99pt9th
1.3.6.1.4.1.6141.2.60.40.1.1.1.11.1.32
wwpLeosTwampClientDscp
1.3.6.1.4.1.6141.2.60.40.1.1.1.12
wwpLeosTwampServerDscp
1.3.6.1.4.1.6141.2.60.40.1.1.1.13
wwpLeosTwampClientHwAssist
1.3.6.1.4.1.6141.2.60.40.1.1.1.14
wwpLeosTwampServerHwAssist
1.3.6.1.4.1.6141.2.60.40.1.1.1.15
MIB Reference
009-3220-011 Standard Revision A
August 2013
63-14 WWP-LEOS-TWAMP-MIB
wwpLeosTwampServerCtrlSessionsTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.40.1.1.1.16
wwpLeosTwampServerCtrlSessionEntry
1.3.6.1.4.1.6141.2.60.40.1.1.1.16.1
wwpLeosTwampServerCtrlSessionId
1.3.6.1.4.1.6141.2.60.40.1.1.1.16.1.1
wwpLeosTwampServerCtrlSessionState
1.3.6.1.4.1.6141.2.60.40.1.1.1.16.1.2
wwpLeosTwampServerCtrlSessionPort
1.3.6.1.4.1.6141.2.60.40.1.1.1.16.1.3
wwpLeosTwampServerCtrlSessionHost
1.3.6.1.4.1.6141.2.60.40.1.1.1.16.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-TWAMP-MIB 63-15
wwpLeosTwampServerCtrlSessionTestMap
Description and OID
Status
Access
current
read-only
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.40.1.1.1.16.1.5
wwpLeosTwampServerSessionDenyTable
1.3.6.1.4.1.6141.2.60.40.1.1.1.17
wwpLeosTwampServerSessionDenyEntry
1.3.6.1.4.1.6141.2.60.40.1.1.1.17.1
wwpLeosTwampServerSessionDenyIp
1.3.6.1.4.1.6141.2.60.40.1.1.1.17.1.1
wwpLeosTwampServerSessionDenyIngressPort
Description and OID
physical ingress port on which the server session with given IP address will be current
denied
read-write
1.3.6.1.4.1.6141.2.60.40.1.1.1.17.1.2
wwpLeosTwampServerSessionDenyStatsTable
Description and OID
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.40.1.1.1.18
MIB Reference
009-3220-011 Standard Revision A
August 2013
63-16 WWP-LEOS-TWAMP-MIB
wwpLeosTwampServerSessionDenyStatsEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
Number of session packets with the given IP address coming on the specified current
ingress physical port have been dropped
read-only
1.3.6.1.4.1.6141.2.60.40.1.1.1.18.1
wwpLeosTwampServerSessionDenyStatsIp
1.3.6.1.4.1.6141.2.60.40.1.1.1.18.1.1
wwpLeosTwampServerSessionDenyStatsDropPkts
Description and OID
1.3.6.1.4.1.6141.2.60.40.1.1.1.18.1.2
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
64-1
WWP-LEOS-USER-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-USER-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosUserAuthProviderTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.39.1.1.1
wwpLeosUserAuthProviderEntry
1.3.6.1.4.1.6141.2.60.39.1.1.1.1
wwpLeosUserAuthProviderPriority
1.3.6.1.4.1.6141.2.60.39.1.1.1.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
64-2 WWP-LEOS-USER-MIB
wwpLeosUserAuthProviderType
Description and OID
Status
The type/method of this user authentication provider. At least one entry must current
be a provider other than 'none' and any given provider may not be used twice.
When a provider is changed to 'none', lower priority providers have their priority
increased to close the gap.
Access
read-write
1.3.6.1.4.1.6141.2.60.39.1.1.1.1.2
wwpLeosUserAuthProviderCalled
Description and OID
Status
The number of calls to this user authentication provider. The counter is cleared current
automatically when AuthProviderType is changed or can be cleared manually.
Access
read-write
1.3.6.1.4.1.6141.2.60.39.1.1.1.1.3
wwpLeosUserAuthProviderSuccess
Description and OID
Status
Access
current
read-write
Status
Access
current
read-write
Status
Access
current
read-write
1.3.6.1.4.1.6141.2.60.39.1.1.1.1.4
wwpLeosUserAuthProviderFailure
1.3.6.1.4.1.6141.2.60.39.1.1.1.1.5
wwpLeosUserAuthProviderSkipped
1.3.6.1.4.1.6141.2.60.39.1.1.1.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-USER-MIB 64-3
wwpLeosUserAuthProviderScope
Description and OID
Status
Access
current
read-write
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.39.1.1.1.1.7
wwpLeosUserWhoTable
1.3.6.1.4.1.6141.2.60.39.1.1.2
wwpLeosUserWhoEntry
1.3.6.1.4.1.6141.2.60.39.1.1.2.1
wwpLeosUserWhoPid
1.3.6.1.4.1.6141.2.60.39.1.1.2.1.1
wwpLeosUserWhoUser
1.3.6.1.4.1.6141.2.60.39.1.1.2.1.2
wwpLeosUserWhoTerminal
1.3.6.1.4.1.6141.2.60.39.1.1.2.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
64-4 WWP-LEOS-USER-MIB
wwpLeosUserWhoIdleTime
Description and OID
Status
Access
The users idle time in minutes. This counter is reset to zero when the shell
process detects input from the user.
current
read-only
Status
Access
Status of the users shell process. To kill a users shell, set this object to
'Destroy'.
current
read-write
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.39.1.1.2.1.4
wwpLeosUserWhoStatus
1.3.6.1.4.1.6141.2.60.39.1.1.2.1.5
wwpLeosUserTable
1.3.6.1.4.1.6141.2.60.39.1.1.3
wwpLeosUserEntry
1.3.6.1.4.1.6141.2.60.39.1.1.3.1
wwpLeosUserUid
Description and OID
The numeric user ID of the user. These numbers are generated by the device current
in order to make indexing the table easy, but they are not tied to specific user
names during a reboot. When a new user is created, the user ID must be an
unused value.
not-accessible
1.3.6.1.4.1.6141.2.60.39.1.1.3.1.1
wwpLeosUserName
Description and OID
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.39.1.1.3.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-USER-MIB 64-5
wwpLeosUserPassword
Description and OID
Status
Access
The users password in encrypted form. When setting this object set
wwpLeosUserIsEncrypted at the same time in order to specify whether the
password being set needs to be encrypted by the device or whether it is
already encrypted.
current
read-create
Status
Access
current
read-create
Status
Access
When this is set to True, the user is one of the default users created in the
device at boot time.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.39.1.1.3.1.3
wwpLeosUserPrivLevel
1.3.6.1.4.1.6141.2.60.39.1.1.3.1.4
wwpLeosUserIsDefault
1.3.6.1.4.1.6141.2.60.39.1.1.3.1.5
wwpLeosUserIsEncrypted
Description and OID
This is always True on a Get since the password is always stored locally on the current
device in encrypted form. During a Set, it is False if you are sending
wwpLeosUserPassword in the clear so the device can encrypt it, or True if
wwpLeosUserPassword is already in encrypted MD5 form.
read-create
1.3.6.1.4.1.6141.2.60.39.1.1.3.1.6
wwpLeosUserIsModified
Description and OID
Status
Access
current
When this is set to True, the user is one of the default users created in the
device, but one or more properties of the user account have been altered from
the default values.
read-only
1.3.6.1.4.1.6141.2.60.39.1.1.3.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
64-6 WWP-LEOS-USER-MIB
wwpLeosUserStatus
Description and OID
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.39.1.1.3.1.8
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
65-1
WWP-LEOS-VLAN-TAG-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-VLAN-TAG-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosMaxVlans
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
The (conceptual) table listing the configuration parameters for the VLAN.
current
not-accessible
1.3.6.1.4.1.6141.2.60.5.1.1.1
wwpLeosMaxSupportedVlanTagId
1.3.6.1.4.1.6141.2.60.5.1.1.2
wwpLeosNumVlans
1.3.6.1.4.1.6141.2.60.5.1.1.3
wwpLeosVlanTable
1.3.6.1.4.1.6141.2.60.5.1.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
65-2 WWP-LEOS-VLAN-TAG-MIB
wwpLeosVlanEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.5.1.1.4.1
wwpLeosVlanId
1.3.6.1.4.1.6141.2.60.5.1.1.4.1.1
wwpLeosVlanName
1.3.6.1.4.1.6141.2.60.5.1.1.4.1.2
wwpLeosVlanStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, there should not be any port/tag associated with this VLAN.
read-write
1.3.6.1.4.1.6141.2.60.5.1.1.4.1.4
wwpLeosVlanMacLrnState
Description and OID
Status
Access
Setting this object enables or disables MAC learning for the VLAN.
current
read-write
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.5.1.1.4.1.5
wwpLeosVlanMacLrnOperState
1.3.6.1.4.1.6141.2.60.5.1.1.4.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VLAN-TAG-MIB 65-3
wwpLeosVlanTranslationVlan
Description and OID
Status
The translated VLAN for the given ingress VLAN specified by wwpLeosVlanId. current
Setting this MIB object to 0 results in unsetting the translation VLAN for given
ingress VLAN wwpLeosVlanId.
Access
read-write
1.3.6.1.4.1.6141.2.60.5.1.1.4.1.7
wwpLeosVlanEgressTpid
Description and OID
Status
Access
This object specifies the tpid used at egress for frames that egress a port on
this vlan. This is used in conjunction with port egress tpid policy described in
wwpLeosVplsVirtualCircuitEtherTypePolicy.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.5.1.1.4.1.8
wwpLeosVlanTagMemberTable
Description and OID
The (conceptual) table listing the configuration parameters for the members of current
the VLANs.
not-accessible
1.3.6.1.4.1.6141.2.60.5.1.1.5
wwpLeosVlanTagMemberEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
The VLAN Tag ID used by the port on this VLAN. If the switch is being used as current
a traditional Layer 2 device, the value of wwpLeosVlanMemberTagId should
be same as wwpLeosVlanMemberId.
read-only
1.3.6.1.4.1.6141.2.60.5.1.1.5.1
wwpLeosVlanMemberPortId
1.3.6.1.4.1.6141.2.60.5.1.1.5.1.1
wwpLeosVlanMemberTagId
Description and OID
1.3.6.1.4.1.6141.2.60.5.1.1.5.1.2
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
65-4 WWP-LEOS-VLAN-TAG-MIB
wwpLeosVlanMemberStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'.
Access
read-create
1.3.6.1.4.1.6141.2.60.5.1.1.5.1.4
wwpLeosVlanCircuitTable
Description and OID
Status
Access
deprecated
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.5.1.1.6
wwpLeosVlanCircuitEntry
Description and OID
The virtual circuit table entry indexed by virtual circuit index. To create an entry, deprecated
use the SNMP multiple set operation because wwpLeosCircuitVlanId,
wwpLeosCircuitName and wwpLeosCircuitType are mandatory while creating
an entry in the table.
not-accessible
1.3.6.1.4.1.6141.2.60.5.1.1.6.1
wwpLeosCircuitIndex
Description and OID
Status
Access
deprecated
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.5.1.1.6.1.1
wwpLeosCircuitVlanId
Description and OID
This represents the VLAN ID associated with virtual circuit index in the table. deprecated
read-write
1.3.6.1.4.1.6141.2.60.5.1.1.6.1.2
wwpLeosCircuitType
Description and OID
Status
Access
deprecated
read-write
1.3.6.1.4.1.6141.2.60.5.1.1.6.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VLAN-TAG-MIB 65-5
wwpLeosCircuitName
Description and OID
Status
Access
deprecated
read-write
Status
Access
This represents the 802.1D priority associated with the virtual circuit.
deprecated
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.5.1.1.6.1.4
wwpLeosCircuitPriority
1.3.6.1.4.1.6141.2.60.5.1.1.6.1.5
wwpLeosCircuitDataTunnelState
Description and OID
This represents the data tunnel state associated with the virtual circuit. Setting deprecated
to 'on' enables the tunnel for data frames. Setting to 'off' disables it.
read-write
1.3.6.1.4.1.6141.2.60.5.1.1.6.1.6
wwpLeosCircuitCtrlProtocolTunnelState
Description and OID
Status
Access
This represents the control frame tunnel state associated with the virtual
circuit. Setting to 'on' enables the tunnel for control frames. Setting to 'off'
disables it.
deprecated
read-write
Status
Access
This represents the number of end points associated with this entry.
deprecated
read-only
Status
Access
Setting this object to 'createAndGo' creates the entry and by default enables
control frame and data frame tunneling.
Setting this object to 'destroy'
deletes the entry from the table for the given VLAN.
deprecated
read-create
1.3.6.1.4.1.6141.2.60.5.1.1.6.1.7
wwpLeosCircuitNumEndPoints
1.3.6.1.4.1.6141.2.60.5.1.1.6.1.8
wwpLeosCircuitStatus
1.3.6.1.4.1.6141.2.60.5.1.1.6.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
65-6 WWP-LEOS-VLAN-TAG-MIB
wwpLeosVlanCircuitPortExclusiveTable
Description and OID
Status
Access
The (conceptual) table listing the layer 2 control frame tunnel status on a
VLAN.
deprecated
not-accessible
Status
Access
The layer 2 control frame protocol tunnel entry for the VLAN.
deprecated
not-accessible
Status
Access
This specifies the port that is the end point of this virtual circuit.
deprecated
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.5.1.1.7
wwpLeosVlanCircuitPortExclusiveEntry
1.3.6.1.4.1.6141.2.60.5.1.1.7.1
wwpLeosPortId
1.3.6.1.4.1.6141.2.60.5.1.1.7.1.1
wwpLeosPortExclusiveStatus
Description and OID
Setting this object to 'createAndGo' creates the entry and designates the port deprecated
as the end point of the virtual circuit. Setting this object to 'destroy' deletes the
entry from the table for the given virtual circuit.
read-create
1.3.6.1.4.1.6141.2.60.5.1.1.7.1.2
wwpLeosVlanCircuitCtrlProtocolTable
Description and OID
Status
The (conceptual) table listing the layer 2 control frame protocol status tunnel deprecated
for a given VLAN.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.5.1.1.8
wwpLeosVlanCircuitCtrlProtocolEntry
Description and OID
Status
Access
The layer 2 control frame protocol tunnel entry for the VLAN.
deprecated
not-accessible
1.3.6.1.4.1.6141.2.60.5.1.1.8.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VLAN-TAG-MIB 65-7
wwpLeosVlanl2ProtocolNum
Description and OID
Status
Access
deprecated
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.5.1.1.8.1.1
wwpLeosVlanl2Type
Description and OID
read-create
1.3.6.1.4.1.6141.2.60.5.1.1.8.1.2
wwpLeosVlanl2AllRxPkts
Description and OID
Status
Access
deprecated
read-only
Status
Access
deprecated
read-only
Status
Access
deprecated
read-only
Status
Access
deprecated
read-only
1.3.6.1.4.1.6141.2.60.5.1.1.9.1
wwpLeosVlanl2AllTunneledPkts
1.3.6.1.4.1.6141.2.60.5.1.1.9.2
wwpLeosVlanl2AllPeerPkts
1.3.6.1.4.1.6141.2.60.5.1.1.9.3
wwpLeosVlanl2AllDiscardedPkts
1.3.6.1.4.1.6141.2.60.5.1.1.9.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
65-8 WWP-LEOS-VLAN-TAG-MIB
wwpLeosVlanl2AllDecodedPkts
Description and OID
Status
Specifies the total number of packets tunneled and then restored on the VLAN. deprecated
Access
read-only
1.3.6.1.4.1.6141.2.60.5.1.1.9.5
wwpLeosVlanl2AllDecodedFailures
Description and OID
Status
Access
deprecated
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.5.1.1.9.6
wwpLeosVlanl2AllTunneledSubcriberPortPkts
Description and OID
Specifies the total number of tunneled packets received on the subscriber port deprecated
on the VLAN.
read-only
1.3.6.1.4.1.6141.2.60.5.1.1.9.7
wwpLeosVlanCircuitProtocolStatsTable
Description and OID
Status
The (conceptual) table listing the layer 2 control frame protocol statistics for a deprecated
given VLAN.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.5.1.1.10
wwpLeosVlanCircuitProtocolStatsEntry
Description and OID
Status
Access
The layer 2 control frame protocol statistics entry for the VLAN.
deprecated
not-accessible
Status
Access
deprecated
read-only
1.3.6.1.4.1.6141.2.60.5.1.1.10.1
wwpLeosVlanl2RxPkts
1.3.6.1.4.1.6141.2.60.5.1.1.10.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VLAN-TAG-MIB 65-9
wwpLeosVlanl2TunneledPkts
Description and OID
Status
Access
deprecated
read-only
Status
Access
deprecated
read-only
Status
Access
deprecated
read-only
Status
Access
deprecated
read-only
Status
Access
deprecated
read-only
Status
Access
deprecated
read-only
1.3.6.1.4.1.6141.2.60.5.1.1.10.1.2
wwpLeosVlanl2PeerPkts
1.3.6.1.4.1.6141.2.60.5.1.1.10.1.3
wwpLeosVlanl2DiscardedPkts
1.3.6.1.4.1.6141.2.60.5.1.1.10.1.4
wwpLeosVlanl2DecodedPkts
1.3.6.1.4.1.6141.2.60.5.1.1.10.1.5
wwpLeosVlanl2DecodedFailures
1.3.6.1.4.1.6141.2.60.5.1.1.10.1.6
wwpLeosVlanl2TunneledSubcriberPortPkts
1.3.6.1.4.1.6141.2.60.5.1.1.10.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
65-10 WWP-LEOS-VLAN-TAG-MIB
wwpLeosVlanStatsTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-create
Status
Access
The value of sysUpTime when this control entry was last activated. This value current
can be used by the management station to ensure that the entry has not been
deleted and recreated between polls.
read-only
1.3.6.1.4.1.6141.2.60.5.1.1.11
wwpLeosVlanStatsEntry
1.3.6.1.4.1.6141.2.60.5.1.1.11.1
wwpLeosVlanStatsVlanId
1.3.6.1.4.1.6141.2.60.5.1.1.11.1.1
wwpLeosVlanStatsCreateTime
Description and OID
1.3.6.1.4.1.6141.2.60.5.1.1.11.1.2
wwpLeosVlanStatsUniOctets
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.5.1.1.11.1.3
wwpLeosVlanStatsUniPkts
1.3.6.1.4.1.6141.2.60.5.1.1.11.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VLAN-TAG-MIB 65-11
wwpLeosVlanStatsNonUniOctets
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.5.1.1.11.1.5
wwpLeosVlanStatsNonUniPkts
1.3.6.1.4.1.6141.2.60.5.1.1.11.1.6
wwpLeosVlanStatsStatus
Description and OID
Setting this object to 'createAndGo' enables the collection of statistics on the current
specified VLAN, clears the initial statistics bucket, and adds the entry to the
table. Setting this object to 'destroy' disables the collection of statistics and
removes the entry from the table for the given VLAN.
read-write
1.3.6.1.4.1.6141.2.60.5.1.1.11.1.7
wwpLeosVlanStatsClear
Description and OID
Status
Access
Setting this object to 'True' resets the statistics of the given VLAN. A read on
this object always returns 'False'.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.5.1.1.11.1.8
wwpLeosVlanStatsPortId
Description and OID
The port ID to be associated with this VLAN statistical entry. When a portId is current
specified, VLAN statistics gatheringis restricted to the specified port. A port ID
of zero means no port restriction. Support for this object is currently not
implemented.
read-write
1.3.6.1.4.1.6141.2.60.5.1.1.11.1.9
wwpLeosVlanTotalStatsTable
Description and OID
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.5.1.1.12
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
65-12 WWP-LEOS-VLAN-TAG-MIB
wwpLeosVlanTotalStatsEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-create
Status
Access
The value of sysUpTime when this control entry was last activated. This value current
can be used by the management station to ensure that the entry has not been
deleted and recreated between polls.
read-only
1.3.6.1.4.1.6141.2.60.5.1.1.12.1
wwpLeosVlanTotalStatsVlanId
1.3.6.1.4.1.6141.2.60.5.1.1.12.1.1
wwpLeosVlanTotalStatsCreateTime
Description and OID
1.3.6.1.4.1.6141.2.60.5.1.1.12.1.2
wwpLeosVlanTotalStatsUniOctets
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.5.1.1.12.1.3
wwpLeosVlanTotalStatsUniPkts
1.3.6.1.4.1.6141.2.60.5.1.1.12.1.4
wwpLeosVlanTotalStatsNonUniOctets
1.3.6.1.4.1.6141.2.60.5.1.1.12.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VLAN-TAG-MIB 65-13
wwpLeosVlanTotalStatsNonUniPkts
Description and OID
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.5.1.1.12.1.6
wwpLeosVlanTotalStatsStatus
Description and OID
Setting this object to 'createAndGo' enables the collection of statistics on the current
specified VLAN, clears the initial statistics bucket and adds the entry to the
table. Setting this object to 'destroy' disables the collection of statistics and
removes the entry from the table for given VLAN.
read-write
1.3.6.1.4.1.6141.2.60.5.1.1.12.1.7
wwpLeosVlanTotalStatsClear
Description and OID
Status
Access
Setting this object to 'True' resets the statistics of the given VLAN. A read on
this object always returns 'False'.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.5.1.1.12.1.8
wwpLeosVlanTotalStatsPortId
Description and OID
The port ID to be associated with this VLAN statistical entry. When a portId is current
specified, the VLAN statistics gathering is restricted to the specified port. A port
ID of zero means no port restriction. Support for this object is currently not
implemented.
read-write
1.3.6.1.4.1.6141.2.60.5.1.1.12.1.9
wwpLeosVlanTranslationTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.5.1.1.13
wwpLeosVlanTranslationEntry
1.3.6.1.4.1.6141.2.60.5.1.1.13.1
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
65-14 WWP-LEOS-VLAN-TAG-MIB
wwpLeosVlanTranslationPgId
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-create
Status
Access
current
read-create
Status
Access
The (conceptual) table listing the egress port restriction parameters for the
VLAN.
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.5.1.1.13.1.1
wwpLeosVlanTranslationFrameVid
1.3.6.1.4.1.6141.2.60.5.1.1.13.1.2
wwpLeosVlanTranslationVlanId
1.3.6.1.4.1.6141.2.60.5.1.1.13.1.3
wwpLeosVlanTranslationStatus
1.3.6.1.4.1.6141.2.60.5.1.1.13.1.4
wwpLeosVlanEPRTable
1.3.6.1.4.1.6141.2.60.5.1.2.1
wwpLeosVlanEPREntry
1.3.6.1.4.1.6141.2.60.5.1.2.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VLAN-TAG-MIB 65-15
wwpLeosVlanEPRState
Description and OID
Status
Setting this object to 'enable' enables the egress port restriction on this VLAN. current
Setting this object to 'disable' disables the egress port restriction on this VLAN.
Access
read-write
1.3.6.1.4.1.6141.2.60.5.1.2.1.1.1
wwpLeosVlanEPRGrpMemTable
Description and OID
Status
Access
The (conceptual) table listing the egress port restriction group for the VLAN
members.
current
not-accessible
Status
Access
The egress port restriction group entry for the VLAN members.
current
not-accessible
Status
Access
Setting this object assigns the specified group to the given port-tag-VLAN
combination.
current
read-write
Status
Access
The (conceptual) table listing the group access for the given VLAN.
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.5.1.2.2
wwpLeosVlanEPRGrpMemEntry
1.3.6.1.4.1.6141.2.60.5.1.2.2.1
wwpLeosVlanEPRGrpName
1.3.6.1.4.1.6141.2.60.5.1.2.2.1.1
wwpLeosVlanEPRGrpAccessTable
1.3.6.1.4.1.6141.2.60.5.1.2.3
wwpLeosVlanEPRGrpAccessEntry
1.3.6.1.4.1.6141.2.60.5.1.2.3.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
65-16 WWP-LEOS-VLAN-TAG-MIB
wwpLeosVlanEPRGrpAAccess
Description and OID
Status
Access
Setting this object allows group A members for this VLAN to talk to specified
group.
current
read-write
Status
Access
Setting this object allows group B members for this VLAN to talk to specified
group.
current
read-write
1.3.6.1.4.1.6141.2.60.5.1.2.3.1.1
wwpLeosVlanEPRGrpBAccess
1.3.6.1.4.1.6141.2.60.5.1.2.3.1.2
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-1
WWP-LEOS-VPLS-MIB
1-
This chapter provides the object definitions and notifications for the WWPLEOS-VPLS-MIB module.
Object Definitions
This section provides the name, description, object identifier (OID), status,
and access for the objects.
wwpLeosVplsVirtualCircuitTable
Description and OID
Status
The (conceptual) table listing the virtual circuit table. To create an entry, the deprecated
SNMP multiple set operation must be used because the following objects need
to be set: when creating an entry in the table.
Access
not-accessible
-wwpLeosVplsVirtualCircuitIndex
-wwpLeosVplsVirtualCircuitProviderVlanId (should exist on the device)
-wwpLeosVplsVirtualCircuitType
-wwpLeosVplsVirtualCircuitStatus.
-wwpLeosVplsVirtualCircuitName.
1.3.6.1.4.1.6141.2.60.28.1.1.1
wwpLeosVplsVirtualCircuitEntry
Description and OID
Status
Access
deprecated
not-accessible
Status
Access
This represents the virtual circuit index in the table. This number should be
unique in the table.
deprecated
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.1.1
wwpLeosVplsVirtualCircuitIndex
1.3.6.1.4.1.6141.2.60.28.1.1.1.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-2 WWP-LEOS-VPLS-MIB
wwpLeosVplsVirtualCircuitProviderVlanId
Description and OID
Status
Access
This represents the provider vlan id associated with the virtual circuit for a
given wwpLeosVplsVirtualCircuitIndex.
deprecated
read-write
Status
Access
This represents the type of virtual circuit associated with the given virtual
circuit.
deprecated
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.1.1.2
wwpLeosVplsVirtualCircuitType
1.3.6.1.4.1.6141.2.60.28.1.1.1.1.3
wwpLeosVplsVirtualCircuitName
Description and OID
This represents the name of the virtual circuit associated with the given virtual deprecated
circuit.
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.1.1.4
wwpLeosVplsVirtualCircuitIngressVcLabel
Description and OID
Status
This represents the VC label to be used for given virtual circuit. This object can deprecated
only be set for virtual circuit entries that have wwpLeosCircuitType set to
'mpls'.
Access
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.1.1.5
wwpLeosVplsVirtualCircuitEgressVcLabel
Description and OID
Status
This represents the VC label to be used for given virtual circuit. This object can deprecated
only be set for virtual circuit entries that have wwpLeosCircuitType set to
'mpls'.
Access
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.1.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-3
wwpLeosVplsVirtualCircuitTunnelIndx
Description and OID
Status
Access
This represents the tunnel associated with this virtual circuit. This object can
only be set for virtual circuit entries that have wwpLeosCircuitType set to
'mpls'.
deprecated
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.1.1.7
wwpLeosVplsVirtualCircuitStatus
Description and OID
Setting this object to 'createAndGo' creates the entry and by default enables deprecated
control frame and data frame tunneling. Setting this object to 'destroy' deletes
the entry from the table for the given VLAN.
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.1.1.8
wwpLeosVplsVirtualSwitchTable
Description and OID
Status
Access
deprecated
not-accessible
Status
Access
deprecated
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.5
wwpLeosVplsVirtualSwitchEntry
This object specifies the virtual switch index that is used as a unique index in deprecated
the table.
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-4 WWP-LEOS-VPLS-MIB
wwpLeosVplsVirtualSwitchName
Description and OID
Status
This object specifies the virtual switch name. It can only be specified at the time deprecated
of creation and cannot be modified later.
Access
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.2
wwpLeosVplsVirtualSwitchPriVc
Description and OID
Status
Access
This object specifies the primary virtual circuit ID associated with this virtual
switch. To unset it set this to 0.
deprecated
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.3
wwpLeosVplsVirtualSwitchSecVc
Description and OID
This object specifies the secondary virtual circuit ID associated with this virtual deprecated
switch. To unset it set this to 0. This object is applicable if
wwpLeosVplsVirtualSwitchType is set to 'mpls'.
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.4
wwpLeosVplsVirtualSwitchActiveVc
Description and OID
Status
Access
This object specifies the virtual circuit that is currently used by this virtual
switch instance.
deprecated
read-only
Status
Access
This object specifies the ingress CoS policy for given virtual switch.
deprecated
read-write
Status
Access
This object specifies the ingress fixed CoS attributes for given virtual switch.
deprecated
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.5
wwpLeosVplsVirtualSwitchEncapCosPolicy
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.6
wwpLeosVplsVirtualSwitchEncapFixedDot1dPri
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-5
wwpLeosVplsVirtualSwitchDecapCosPolicy
Description and OID
Status
Access
This object specifies the egress CoS policy for given virtual switch.
deprecated
read-write
Status
Access
This object specifies the egress CoS attributes for given virtual switch.
deprecated
read-write
Status
Access
This object specifies the subscriber vlan Id for given virtual switch.
deprecated
read-write
Status
Access
This object enables or disables control protocol tunneling for a given virtual
switch.
deprecated
read-write
Status
Access
deprecated
read-create
Status
Access
This object can be set to 'createAndGo' to create an entry in the table. This
object can be set to 'destroy' to delete an entry in the table.
deprecated
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.8
wwpLeosVplsVirtualSwitchDecapFixedDot1dPri
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.9
wwpLeosVplsVirtualSwitchSubscriberVlan
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.10
wwpLeosVplsVirtualSwitchCtrlProtocolTunnelState
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.11
wwpLeosVplsVirtualSwitchType
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.12
wwpLeosVplsVirtualSwitchStatus
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.13
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-6 WWP-LEOS-VPLS-MIB
wwpLeosVplsVirtualSwitchMemberTable
Description and OID
Status
Access
deprecated
not-accessible
Status
Access
deprecated
not-accessible
Status
Access
deprecated
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.6
wwpLeosVplsVirtualSwitchMemberEntry
1.3.6.1.4.1.6141.2.60.28.1.1.6.1
wwpLeosVplsVirtualSwitchMemberPortId
1.3.6.1.4.1.6141.2.60.28.1.1.6.1.1
wwpLeosVplsVirtualSwitchMemberStatus
Description and OID
This object can be set to 'createandgo' to add an entry in the table. This object deprecated
can be set to 'destroy' to delete an entry in the table. Refer to description of
table entry to see how to create entries in the table.
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.6.1.2
wwpLeosVplsSwitchCtrlProtocolTable
Description and OID
Status
The (conceptual) table listing the L2 virtual switch control frame protocol status deprecated
tunnel for a given VPLS.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.28.1.1.7
wwpLeosVplsSwitchCtrlProtocolEntry
Description and OID
Status
Access
The layer 2 virtual switch control frame protocol tunnel entry for the Vpls.
deprecated
not-accessible
1.3.6.1.4.1.6141.2.60.28.1.1.7.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-7
wwpLeosVplsSwitchCtrlProtocolNum
Description and OID
Status
Access
This object represent the list of protocols the device can support.
deprecated
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.7.1.1
wwpLeosVplsSwitchCtrlType
Description and OID
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.7.1.2
wwpLeosVplsSwitchReservedVlanTable
Description and OID
Status
Access
The (conceptual) table listing the reserved Vlans used for virtual switch.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This object is used to specify the vlan ID to be reserved for virtual switch.
Reserved vlans are used when virtual switch is created.
current
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.8
wwpLeosVplsSwitchReservedVlanEntry
1.3.6.1.4.1.6141.2.60.28.1.1.8.1
wwpLeosVplsSwitchReservedVlanId
1.3.6.1.4.1.6141.2.60.28.1.1.8.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-8 WWP-LEOS-VPLS-MIB
wwpLeosVplsSwitchReservedVlanStatus
Description and OID
Status
Access
Setting this object to 'createandgo' reserves the VLAN for a virtual switch.
Setting this object to 'destroy means the VALN is no longer reserved for the
virtual switch.
current
read-create
Status
Access
This object specifies the fixed TTL value for all tunnels.
current
read-write
Status
Access
Setting this object sets the PE resolver timeout. This timeout value decides
how frequently PE resolver arps for the destination IP specified by
wwpLeosVplsEncapTunnelDestAddr.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.8.1.2
wwpLeosVplsTunnelFixedTTL
1.3.6.1.4.1.6141.2.60.28.1.1.9.1
wwpLeosVplsResolverTimeout
1.3.6.1.4.1.6141.2.60.28.1.1.9.2
wwpLeosVplsStaticLabelRangeStart
Description and OID
Setting this object sets the lowest label that can be assigned to static encap / current
decap tunnels or virtual circuits. The multiple set operation can be used to set
both wwpLeosVplsStaticLabelRangeStart and
wwpLeosVplsStaticLabelRangeEnd. wwpLeosVplsStaticLabelRangeStart
must always be less than wwpLeosVplsStaticLabelRangeEnd. The value of 0
means label range is not available. Attempting to set this object to 0 returns
COMMIT FAILED.
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.9.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-9
wwpLeosVplsStaticLabelRangeEnd
Description and OID
Status
Setting this object sets the maximum label that can be assigned to static encap current
/ decap tunnels or virtual circuits. Multiple set operation can be used to set both
wwpLeosVplsStaticLabelRangeStart and
wwpLeosVplsStaticLabelRangeEnd. wwpLeosVplsStaticLabelRangeStart
must always be less than wwpLeosVplsStaticLabelRangeEnd.The value of 0
means label range is not available. Attempting to set this object to 0 returns
COMMIT FAILED.
Access
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.9.4
wwpLeosVplsDynamicLabelRangeStart
Description and OID
Status
Setting this object sets the lowest label that can be assigned to dynamic encap current
/ decap tunnels or virtual circuits. Multiple set operation can be used to set both
wwpLeosVplsDynamicLabelRangeStart and
wwpLeosVplsDynamicLabelRangeEnd.
wwpLeosVplsDynamicLabelRangeStart must always be less than
wwpLeosVplsDynamicLabelRangeEnd.The value of 0 means label range is
not available. Attempting to set this object to 0 returns COMMIT FAILED.
Access
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.9.5
wwpLeosVplsDynamicLabelRangeEnd
Description and OID
Status
Access
Setting this object sets the maximum label that can be assigned to encap
tunnels or virtual circuits. Multiple set operation can be used to set both
wwpLeosVplsDynamicLabelRangeStart and
wwpLeosVplsDynamicLabelRangeEnd.
wwpLeosVplsDynamicLabelRangeStart must always be less than
wwpLeosVplsDynamicLabelRangeEnd. The value of 0 means label range is
not available. Attempting to set this object to 0 returns COMMIT FAILED.
current
read-write
Status
Access
Setting this object to clear resets statistics for all virtual circuits.
current
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.9.6
wwpLeosVplsVirtualCircuitStatsClear
1.3.6.1.4.1.6141.2.60.28.1.1.9.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-10 WWP-LEOS-VPLS-MIB
wwpLeosVplsVirtualSwitchEthL2CftMode
Description and OID
Status
Access
current
read-write
Status
Access
MPLS path table used to represent the explicit path for RSVP tunnels.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This object specifies the unique entry in the MPLS path table. This is the
primary index into this table identifying a particular explicit route object
current
read-only
Status
Access
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.9.8
wwpLeosVplsMplsPathTable
1.3.6.1.4.1.6141.2.60.28.1.1.10
wwpLeosVplsMplsPathEntry
1.3.6.1.4.1.6141.2.60.28.1.1.10.1
wwpLeosVplsMplsPathIndex
1.3.6.1.4.1.6141.2.60.28.1.1.10.1.1
wwpLeosVplsMplsPathName
1.3.6.1.4.1.6141.2.60.28.1.1.10.1.2
wwpLeosVplsMplsPathRowStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, set this object to 'destroy'. If the entry exists, it is displayed as
'active'.
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.10.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-11
wwpLeosVplsMplsPathMemberTable
Description and OID
Status
Access
Table specifies the list of IP addresses (Hops) to get to the destination PE.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Specifies the IP address of the hop that the tunnel should traverse.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.11
wwpLeosVplsMplsPathMemberEntry
1.3.6.1.4.1.6141.2.60.28.1.1.11.1
wwpLeosVplsMplsPathOptionIndex
1.3.6.1.4.1.6141.2.60.28.1.1.11.1.1
wwpLeosVplsMplsPathMemberIpIndex
1.3.6.1.4.1.6141.2.60.28.1.1.11.1.2
wwpLeosVplsMplsPathMemberIp
1.3.6.1.4.1.6141.2.60.28.1.1.11.1.3
wwpLeosVplsMplsPathMemberRowStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, set this object to 'destroy'. If the entry exists, it is displayed as
'active'.
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.11.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-12 WWP-LEOS-VPLS-MIB
wwpLeosVplsRsvpAttrTable
Description and OID
Status
Access
not-accessible
1.3.6.1.4.1.6141.2.60.28.1.1.12
wwpLeosVplsRsvpAttrEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
The Hold priority used by RSVP protocol when signaling for tunnels.
current
read-write
Status
Access
The setup priority used by RSVP protocol when signaling for tunnels.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.12.1
wwpLeosVplsRsvpAttrIndex
1.3.6.1.4.1.6141.2.60.28.1.1.12.1.1
wwpLeosVplsRsvpAttrHoldPri
1.3.6.1.4.1.6141.2.60.28.1.1.12.1.2
wwpLeosVplsRsvpAttrSetupPri
1.3.6.1.4.1.6141.2.60.28.1.1.12.1.3
wwpLeosVplsRsvpAttrRecordRoute
Description and OID
The object specifies if record route feature is enabled when RSVP protocol is current
used to signal tunnel LSP.
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.12.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-13
wwpLeosVplsEncapTunnelTable
Description and OID
Status
This table represents the encap tunnels for VPLS. To create STATIC encap current
tunnel, the following objects must be set: Encap and Decap Tunnel name
cannot be same but indexes, wwpLeosVplsEncapTunnelName must be
specified, wwpLeosVplsEncapTunnelEncapLabel must be specified (0,
32..1023), wwpLeosVplsEncapTunnelType must be set to static,
wwpLeosVplsEncapTunnelRowStatus must be set to createAndGo. To create
DYNAMIC encap tunnel, the following objects must be set:
wwpLeosVplsEncapTunnelName must be specified,
wwpLeosVplsEncapTunnelType must be set to dynamic,
wwpLeosVplsEncapTunnelProtType must be set to rsvp,
wwpLeosVplsEncapTunnelPathName must be specified, and this path must
exist in wwpLeosVplsMplsPathTable, wwpLeosVplsEncapTunnelRowStatus
must be set to createAndGo, wwpLeosVplsEncapTunnelFastReroute must be
set if using fast reroute, wwpLeosVplsEncapTunnelLspType must be
specified, if not specified it is assumed primary. To create DYNAMIC encap
backup tunnel, the following objects must be set:
wwpLeosVplsEncapTunnelName must be set to primary tunnel name that this
tunnel is backing up, wwpLeosVplsEncapTunnelType must be set to dynamic,
wwpLeosVplsEncapTunnelProtType must be set to rsvp,
wwpLeosVplsEncapTunnelPathName must be specified, and this path must
exist in wwpLeosVplsMplsPathTable, wwpLeosVplsEncapTunnelRowStatus
must be set to createAndGo. To create static PBT encap tunnel, the following
objects must be set: wwpLeosVplsEncapTunnelName must be specified,
wwpLeosVplsEncapTunnelType must be set to staticPbt,
wwpLeosVplsEncapTunnelBVID must be specified,
wwpLeosVplsEncapTunnelRowStatus must be set to createAndGo,
wwpLeosVplsEncapTunnelDestBridgeIndex must be set,
wwpLeosVplsEncapTunnelEgressPort must be specified.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.28.1.1.13
wwpLeosVplsEncapTunnelEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.13.1
wwpLeosVplsEncapTunnelId
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-14 WWP-LEOS-VPLS-MIB
wwpLeosVplsEncapTunnelName
Description and OID
Status
This object specfies the name assigned to this tunnel. This object can only be current
specified while creating an entry in the table and cannot be modified after the
entry has been created. Encap and Decap Tunnel name cannot be the same
but indexes can. When creating backup tunnel this name should be set to the
same name that is also used by primary tunnel.
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.2
wwpLeosVplsEncapTunnelType
Description and OID
Status
This object specifies the type of tunnel. This object can only be specified while current
creating an entry in the table and cannot be modified after the entry has been
created.
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.3
wwpLeosVplsEncapTunnelDestAddr
Description and OID
Status
This object specifies the IP address used to resolve this tunnel. This object is current
only applicable if wwpLeosVplsEncapTunnelType not equal to staticPbt.
Access
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.4
wwpLeosVplsEncapTunnelPathIndex
Description and OID
Status
This object specifies the path that this tunnel is supposed to use signal labels current
for this tunnel. This object is only used if wwpLeosVplsEncapTunnelType is set
to dynamic.
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.5
wwpLeosVplsEncapTunnelEncapCosPolicy
Description and OID
Status
This object specifies the PBT encapsulated CoS policy assigned to this tunnel. current
inheritVC and inheritVs options are deprecated and should not be used. rcosmapped option should be used in place of inheritVc
Access
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-15
wwpLeosVplsEncapTunnelEncapFixedExp
Description and OID
Status
Access
This object specifies the encap fixed EXP assigned to this tunnel.
current
read-write
Status
Access
This object specifies the TTL policy for the given tunnel.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.7
wwpLeosVplsEncapTunnelTTLPolicy
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.8
wwpLeosVplsEncapTunnelEncapLabel
Description and OID
This object specifies the encap label assigned to this tunnel. If the label is not current
yet known (signaling in process), the object should return a value of 0xFFFF.
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.9
wwpLeosVplsEncapTunnelProtType
Description and OID
Status
Setting this object at the time of entry creation specifies the type of protocol to current
be used for this tunnel. This object is only used if
wwpLeosVplsEncapTunnelType is set to dynamic. This object cannot be
modified after the entry has been created.
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.10
wwpLeosVplsEncapTunnelDestResolvedMac
Description and OID
Status
Access
This object specifies the resolved MAC address for the given destination IP
(wwpLeosVplsEncapTunnelDestIp).
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.11
wwpLeosVplsEncapTunnelOperStatus
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-16 WWP-LEOS-VPLS-MIB
wwpLeosVplsEncapTunnelAdminStatus
Description and OID
Status
Access
current
read-write
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.13
wwpLeosVplsEncapTunnelDestResolvedPort
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.14
wwpLeosVplsEncapTunnelDestResolvedVlan
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.15
wwpLeosVplsEncapTunnelRowStatus
Description and OID
Setting this object to 'createAndGo' creates the entry in the table. Setting this current
object to 'destroy' deletes the entry from the table. Refer to description of
wwpLeosVplsEncapTunnelTable for details of creating and deleting entries in
the table.
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.16
wwpLeosVplsEncapTunnelFastReroute
Description and OID
Status
This object specifies if the backup tunnel should provide link or node
current
protection. This object should only be specified if
wwpLeosVplsEncapTunnelType = dynamic and
wwpLeosVplsEncapTunnelLspType = backup. This object cannot be modified
once created.
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.17
wwpLeosVplsEncapTunnelLspType
Description and OID
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.18
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-17
wwpLeosVplsEncapTunnelPartnerTunnelId
Description and OID
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.19
wwpLeosVplsEncapTunnelBVID
Description and OID
This object specifies the provider backbone bridge vlan. This object is only
current
applicable if wwpLeosVplsEncapTunnelType is set to staticPbt otherwise this
object is ignored.
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.20
wwpLeosVplsEncapTunnelDestBridgeIndex
Description and OID
Status
This object specifies the provider backbone bridge index. This object is only current
applicable if wwpLeosVplsEncapTunnelType is set to staticPbt otherwise this
object is ignored. This object must be set to one of the values specified by
wwpLeosPbtBridgeNameMacMapIndex. If this object is set to 0, this value is
ignored.
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.21
wwpLeosVplsEncapTunnelEgressPort
Description and OID
Status
This object specifies the provider backbone bridge port. This object is only
current
applicable if wwpLeosVplsEncapTunnelType is set to staticPbt otherwise this
object is ignored.
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.22
wwpLeosVplsEncapTunnelEncapFixedPCP
Description and OID
Status
Access
This object specifies the encap fixed PCP assigned to this tunnel.
current
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.23
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-18 WWP-LEOS-VPLS-MIB
wwpLeosVplsEncapTunnelActive
Description and OID
Status
Access
This object specifes if the tunnel is active, and it is only valid if TunnelType is current
staticPbt.
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.24
wwpLeosVplsDecapTunnelTable
Description and OID
Status
Access
not-accessible
1.3.6.1.4.1.6141.2.60.28.1.1.14
wwpLeosVplsDecapTunnelEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.14.1
wwpLeosVplsDecapTunnelId
1.3.6.1.4.1.6141.2.60.28.1.1.14.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-19
wwpLeosVplsDecapTunnelName
Description and OID
Status
This object specfies the name assigned to the tunnel. This object can only be current
specified while creating an entry in the table and cannot be modified after the
entry has been created.
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.14.1.2
wwpLeosVplsDecapTunnelLabel
Description and OID
Status
This object specifies the Decap label assigned to this tunnel. If the label is not current
yet known (signaling in process), the object should return a value of 0xFFFF.
Access
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.14.1.3
wwpLeosVplsDecapTunnelType
Description and OID
Status
This object specifies if the tunnel is created because of a remote PE request current
(dynamic tunnel) or it is created by the user on the device (Decap tunnel). This
object cannot be set to dynamic.
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.14.1.4
wwpLeosVplsDecapTunnelRowStatus
Description and OID
Status
Setting this object to 'createAndGo' creates the entry in the table. Setting this current
object to 'destroy' deletes the entry from the table. Refer to description of
wwpLeosVplsDecapTunnelTable for details of creating and deleting entries in
the table.
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.14.1.5
wwpLeosVplsDecapTunnelBVID
Description and OID
Status
Access
This object specifies the provider bridge vlan ID expected in the mac in mac
frames ingressing the device from provider bridge facing side.
current
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.14.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-20 WWP-LEOS-VPLS-MIB
wwpLeosVplsDecapTunnelBridgeIndex
Description and OID
Status
This object specifies the provider bridge host index that is used to query
current
wwpLeosPbtHostNameMacMapTable to find out corresponding mac address
expected in the pbt frames ingressing the device from provider bridge facing
side.
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.14.1.7
wwpLeosVplsDecapTunnelPort
Description and OID
Status
This object specifies the incoming port on which the pbt frames are expected. current
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.14.1.8
wwpLeosVplsDecapTunnelMac
Description and OID
Status
Access
This object specifies the source mac address expected in the pbt frames
coming from provider network facing side. This mac address is derived from
wwpLeosPbtHostNameMacMapTable table using the value specified by
wwpLeosVplsDecapTunnelBridgeName.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.14.1.9
wwpLeosVplsDecapTunnelOperStatus
1.3.6.1.4.1.6141.2.60.28.1.1.14.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-21
wwpLeosVplsVirtualCircuitMplsTable
Description and OID
Status
The (conceptual) table listing the MPLS virtual circuit table. To create an entry, current
the SNMP multiple set operation must be used. The following objects must be
specified when creating an MPLS virtual circuit: MPLS and Ethernet virtual
circuit name cannot be the same but indexes can,
Access
not-accessible
Status
Access
current
not-accessible
Status
Access
This represents the virtual circuit indexed in the table. This number should be current
unique in the table.
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.15.1
wwpLeosVplsVirtualCircuitMplsIndex
Description and OID
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.1
wwpLeosVplsVirtualCircuitMplsName
Description and OID
Status
This represents the name of the virtual circuit associated with the given virtual current
circuit. Mpls and Ethernet virtual circuit name cannot be same but indexes can.
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-22 WWP-LEOS-VPLS-MIB
wwpLeosVplsVirtualCircuitMplsType
Description and OID
Status
Access
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.3
wwpLeosVplsVirtualCircuitMplsDestAddr
Description and OID
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.4
wwpLeosVplsVirtualCircuitMplsTunnelPolicy
Description and OID
Status
This object specifies that this virtual circuit should select the tunnel as fixed or current
use the first active tunnel available on the outgoing port. If this object is set to
fixed, wwpLeosVplsVirtualCircuitMplsTunnelIndx must be specified.
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.5
wwpLeosVplsVirtualCircuitMplsFixedTunnelId
Description and OID
Status
This represents the tunnel to which this virtual circuit should be mapped. This current
object is only used if wwpLeosVplsVirtualCircuitMplsTunnelPolicy is set to
fixed.
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.6
wwpLeosVplsVirtualCircuitMplsActiveTunnelId
Description and OID
Status
Access
This represents the tunnel that this virtual circuit is currently using. This object current
is equal to wwpLeosVplsVirtualCircuitMplsFixedTunnelId if
wwpLeosVplsVirtualCircuitMplsTunnelPolicy is set to fixed.
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.7
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-23
wwpLeosVplsVirtualCircuitMplsOperStatus
Description and OID
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.8
wwpLeosVplsVirtualCircuitMplsEncapLabel
Description and OID
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.9
wwpLeosVplsVirtualCircuitMplsDecapLabel
Description and OID
Status
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.10
wwpLeosVplsVirtualCircuitMplsGroupId
Description and OID
Status
Access
current
read-create
Status
Access
This specifies that this virtual circuit is primary or secondary virtual circuit. If
primary virtual circuit goes down, the secondary virtual circuit is used.
current
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.11
wwpLeosVplsVirtualCircuitMplsProtectionType
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.12
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-24 WWP-LEOS-VPLS-MIB
wwpLeosVplsVirtualCircuitMplsStatusTlv
Description and OID
Status
Specifies whether the Status TLV in LDP signaling should be advertised. This current
object is only used if wwpLeosVplsVirtualCircuitMplsType is set to dynamic.
This field cannot be modified while wwpLeosVplsVirtualCircuitMplsStatus is
active
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.13
wwpLeosVplsVirtualCircuitMplsMtu
Description and OID
Status
Setting this object sets the MTU for this VC. This MTU is advertised to the peer current
if wwpLeosVplsVirtualCircuitMplsType is set to dynamic.
Access
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.14
wwpLeosVplsVirtualCircuitMplsStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table,set this object to 'createAndGo'. To delete a row
in this table, set this object to 'destroy'. If the entry exists, it is displayed as
'active'.
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.15
wwpLeosVplsVirtualCircuitMplsStatsTable
Description and OID
Status
Access
The (conceptual) table listing the mpls virtual circuit statistics table.
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.28.1.1.16
wwpLeosVplsVirtualCircuitMplsStatsEntry
1.3.6.1.4.1.6141.2.60.28.1.1.16.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-25
wwpLeosVplsVirtualCircuitMplsTxBytesHi
Description and OID
Status
Access
This represents the total number of higher 32 bits transmitted for the given
virtual circuit.
current
read-only
Status
Access
This represents the total number of lower 32 bits transmitted for the given
virtual circuit.
current
read-only
Status
Access
This represents the total number of higher 32 bits received for the given MPLS current
virtual circuit.
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.16.1.1
wwpLeosVplsVirtualCircuitMplsTxBytesLo
1.3.6.1.4.1.6141.2.60.28.1.1.16.1.2
wwpLeosVplsVirtualCircuitMplsRxBytesHi
Description and OID
1.3.6.1.4.1.6141.2.60.28.1.1.16.1.3
wwpLeosVplsVirtualCircuitMplsRxBytesLo
Description and OID
Status
Access
This represents the total number of lower 32 bits received for the given virtual current
circuit.
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.16.1.4
wwpLeosVplsVirtualCircuitEthTable
Description and OID
Status
The (conceptual) table listing the virtual circuit table. To create an entry, the current
SNMP multiple set operation must be used because the following objects need
to be set when creating an entry in the table: MPLS and Ethernet virtual circuit
name cannot be the same but indexes can, wwpLeosVplsVirtualCircuitEthName must be specified, wwpLeosVplsVirtualCircuitEthProviderVlanId must be specified and must
exist on the device, -wwpLeosVplsVirtualCircuitEthStatus must be specified.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.28.1.1.17
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-26 WWP-LEOS-VPLS-MIB
wwpLeosVplsVirtualCircuitEthEntry
Description and OID
Status
Access
not-accessible
1.3.6.1.4.1.6141.2.60.28.1.1.17.1
wwpLeosVplsVirtualCircuitEthIndex
Description and OID
Status
Access
This represents the virtual circuit index in the table. This number should be
unique in the table.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.17.1.1
wwpLeosVplsVirtualCircuitEthName
Description and OID
This represents the name of the virtual circuit associated with the given virtual current
circuit. Mpls and Ethernet virtual circuit name cannot be the same but indexes
can.
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.17.1.2
wwpLeosVplsVirtualCircuitEthProviderVlanId
Description and OID
Status
Access
This represents the provider vlan id associated with the virtual circuit for a
given wwpLeosVplsVirtualCircuitMplsIndex.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.17.1.3
wwpLeosVplsVirtualCircuitEthRowStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, set this object to 'destroy'. If the entry exists, it is displayed as
'active'.
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.17.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-27
wwpLeosVplsVirtualCircuitEthStatsMonitor
Description and OID
Status
Access
current
read-create
Status
Access
The (conceptual) table listing the ether type to be used for each port.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This object specifies the port number used as index in the table.
current
read-write
Status
Access
This object specifies the ethertype of the outer VLAN tag for given port.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.17.1.5
wwpLeosVplsVirtualCircuitEtherTypeTable
1.3.6.1.4.1.6141.2.60.28.1.1.18
wwpLeosVplsVirtualCircuitEtherTypeEntry
1.3.6.1.4.1.6141.2.60.28.1.1.18.1
wwpLeosVplsVirtualCircuitPortId
1.3.6.1.4.1.6141.2.60.28.1.1.18.1.1
wwpLeosVplsVirtualCircuitEtherType
1.3.6.1.4.1.6141.2.60.28.1.1.18.1.2
wwpLeosVplsVirtualCircuitEtherTypePolicy
Description and OID
This object specifies the policy for the ethertype of the outer VLAN tag for the current
given port. 'All' means all frames have the type set in
wwpLeosVplsVirtualCircuitEtherType. 'encapOnly' means only Q-in-Q
encapsulated frames use that value. If wwpLeosVplsVirtualCircuitEtherType is
set to type 8100, 'ALL' is always the operational value for this item. vlanTpid
means that the port uses the TPID configured for the vlan at egress.
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.18.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-28 WWP-LEOS-VPLS-MIB
wwpLeosVplsVirtualCircuitEthStatsTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This represents the total number of higher 32 bits transmitted for the given
virtual circuit.
current
read-only
Status
Access
This represents the total number of lower 32 bits transmitted for the given
virtual circuit.
current
read-only
Status
Access
This represents the total number of higher 32 bits received for the given virtual current
circuit.
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.19
wwpLeosVplsVirtualCircuitEthStatsEntry
1.3.6.1.4.1.6141.2.60.28.1.1.19.1
wwpLeosVplsVirtualCircuitEthTxBytesHi
1.3.6.1.4.1.6141.2.60.28.1.1.19.1.1
wwpLeosVplsVirtualCircuitEthTxBytesLo
1.3.6.1.4.1.6141.2.60.28.1.1.19.1.2
wwpLeosVplsVirtualCircuitEthRxBytesHi
Description and OID
1.3.6.1.4.1.6141.2.60.28.1.1.19.1.3
wwpLeosVplsVirtualCircuitEthRxBytesLo
Description and OID
Status
Access
This represents the total number of lower 32 bits received for the given virtual current
circuit.
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.19.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-29
wwpLeosVirtualCircuitEthStatsClear
Description and OID
Status
Access
To clear the statistics for the given virtual circuit, set this object to clear(1)
current
read-write
Status
Access
current
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.19.1.5
wwpLeosVplsVirtualSwitchMplsTable
1.3.6.1.4.1.6141.2.60.28.1.1.20
wwpLeosVplsVirtualSwitchMplsEntry
Description and OID
current
This entry corresponds to a single entry in
wwpLeosVplsVirtualSwitchMplsTable table. To create an entry in the table, the
following criteria must be met: MPLS and Ethernet virtual switch name cannot
be same but indexes can,
not-accessible
Status
Access
This object specifies the virtual switch index that is used as unique index in the current
table.
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.1
wwpLeosVplsVirtualSwitchMplsName
Description and OID
Status
This object specifies the virtual switch name. It can only be specified at the time current
of creation and cannot be modified later. MPLS and Ethernet virtual switch
name cannot be the same but indexes can.
Access
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-30 WWP-LEOS-VPLS-MIB
wwpLeosVplsVirtualSwitchMplsVpnId
Description and OID
Status
Access
This object specifies the subscriber VLAN ID for given virtual switch.
current
read-write
Status
Access
This object specifies the ingress CoS policy for the given virtual switch.
current
read-write
Status
Access
This object specifies the ingress fixed CoS attributes for the given virtual
switch.
current
read-write
Status
Access
This object specifies the egress CoS policy for the given virtual switch.
current
read-write
Status
Access
This object specifies the egress CoS attributes for the given virtual switch.
current
read-write
Status
Access
This object enables or disables control protocol tunneling for a given virtual
switch.
current
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.3
wwpLeosVplsVirtualSwitchMplsEncapCosPolicy
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.4
wwpLeosVplsVirtualSwitchMplsEncapFixedDot1dPri
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.5
wwpLeosVplsVirtualSwitchMplsDecapCosPolicy
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.6
wwpLeosVplsVirtualSwitchMplsDecapFixedDot1dPri
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.7
wwpLeosVplsVirtualSwitchMplsCtrlProtocolTunnelState
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-31
wwpLeosVplsVirtualSwitchMplsDecapTTLPolicy
Description and OID
Status
Access
This object specifies the TTL policy for a given virtual switch.
current
read-write
Status
Access
current
read-create
Status
Access
This object can be set to 'createAndGo' to create an entry in the table. This
object can be set to 'destroy' to delete an entry in the table.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.9
wwpLeosVplsVirtualSwitchMplsType
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.10
wwpLeosVplsVirtualSwitchMplsRowStatus
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.11
wwpLeosVplsVirtualSwitchMplsMacLrnState
Description and OID
Setting this object sets the MAC learning state for a given MPLS virtual switch. current
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.12
wwpLeosVplsVirtualSwitchMplsTunnelMethod
Description and OID
Status
Setting this object sets the tunneling method for a given MPLS virtual switch. current
Access
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.13
wwpLeosVplsVirtualSwitchMplsCtrlProtocolDot1dPri
Description and OID
Status
This object specifies the .1d priority to use when encapsulating control frames. current
Access
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.14
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-32 WWP-LEOS-VPLS-MIB
wwpLeosVplsVirtualSwitchMplsSubscriberDot1dPolicy
Description and OID
Status
Setting this object configures the policy used to decide whether the subscriber current
frame .1d priority should be left alone, or be remarked to the computed
provider priority.
Access
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.15
wwpLeosVplsVirtualSwitchMplsCtrlProtTransFrameValidate
Description and OID
Status
Setting this object sets the transparent-mode validate for a given MPLS virtual current
switch.
Access
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.16
wwpLeosVplsVirtualSwitchMplsHonorPriority
Description and OID
Status
Setting this object selects either the C-VLAN or S-VLAN priority to use through current
the virtual switch and its associated MPLS Tunnel.
Access
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.17
wwpLeosVplsVirtualSwitchMplsMemberTable
Description and OID
Status
Access
deprecated
not-accessible
Status
Access
deprecated
not-accessible
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.21
wwpLeosVplsVirtualSwitchMplsMemberEntry
1.3.6.1.4.1.6141.2.60.28.1.1.21.1
wwpLeosVplsVirtualSwitchMplsMemberPortId
Description and OID
This object specifies the port number that is to be added as a customer facing current
port for the mpls virtual switch index wwpLeosVplsVirtualSwitchMplsIndx.
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.21.1.1
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-33
wwpLeosVplsVirtualSwitchMplsMemberVlanId
Description and OID
Status
This object specifies the subscriber VLAN attached to the MPLS virtual switch current
index wwpLeosVplsVirtualSwitchMplsIndx. This object cannot be modified one
entry is created in this table. This object can only be specified when creating
entries in this table.
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.21.1.2
wwpLeosVplsVirtualSwitchMplsMemberRowStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, set this object to 'destroy'. If the entry exists, it is displayed as
'active'.
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.21.1.3
wwpLeosVplsVirtualSwitchMplsMemberEncapCosPolicy
Description and OID
Status
Access
This object specifies the ingress CoS policy for the given member entry. By
default, 'inheritVs' (the encap CoS policy) is inherited from the parent virtualswitch settings.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.21.1.4
wwpLeosVplsVirtualSwitchMplsMemberEncapCosFixedDot1DPri
Description and OID
This object specifies the ingress fixed CoS attributes for the given member
current
entry. This attribute is only valid when the member (EncapCosPolicy) is set to
'fixed'
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.21.1.5
wwpLeosVplsVirtualSwitchMplsMemberSubscriberDot1dPolicy
Description and OID
Status
This object configures the member policy used to decide if the subscriber
current
frame's 'c-vlan' .1d priority should be left alone ('leave'), or be remarked
('provider-inherit') to the resolved provider 's-vlan' priority. This attribute is valid
when the member's SubscriberDot1Policy is 'leave' or 'provider-inherit'. If set
to 'inheritVs', the attribute is inherited from the parent virtual-switch.
Access
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.21.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-34 WWP-LEOS-VPLS-MIB
wwpLeosVplsVirtualSwitchMplsMemberStatsTable
Description and OID
Status
Access
The (conceptual) table listing the virtual switch member statistics table.
deprecated
not-accessible
Status
Access
deprecated
not-accessible
Status
Access
This represents the total number of higher 32 bits received for given MPLS
virtual switch member port.
current
read-only
Status
Access
This represents the total number of lower 32 bits received for the given virtual current
switch member port.
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.22
wwpLeosVplsVirtualSwitchMplsMemberStatsEntry
1.3.6.1.4.1.6141.2.60.28.1.1.22.1
wwpLeosVplsVirtualSwitchMplsMemberRxBytesHi
1.3.6.1.4.1.6141.2.60.28.1.1.22.1.1
wwpLeosVplsVirtualSwitchMplsMemberRxBytesLo
Description and OID
1.3.6.1.4.1.6141.2.60.28.1.1.22.1.2
wwpLeosVplsVirtualSwitchMplsMemberMeshVcTable
Description and OID
Status
This table is used to create an MPLS virtual switch mesh-vc membership entry. current
Access
not-accessible
1.3.6.1.4.1.6141.2.60.28.1.1.23
wwpLeosVplsVirtualSwitchMplsMemberMeshVcEntry
Description and OID
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.28.1.1.23.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-35
wwpLeosVplsVirtualSwitchMplsMemberMeshVcMeshVc
Description and OID
Status
Access
This object specifies the mesh virtual circuit for this mpls virtual switch.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.23.1.1
wwpLeosVplsVirtualSwitchMplsMemberMeshVcRowStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, set this object to 'destroy'. If the entry exists, it is displayed as
'active'.
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.23.1.2
wwpLeosVplsVirtualSwitchMplsMemberAcVcTable
Description and OID
Status
This table is used to create an MPLS virtual switch mesh-vc membership entry. current
Access
not-accessible
1.3.6.1.4.1.6141.2.60.28.1.1.24
wwpLeosVplsVirtualSwitchMplsMemberAcVcEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
This object specifies the attachment virtual circuit for this mpls virtual switch.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.24.1
wwpLeosVplsVirtualSwitchMplsMemberAcVcAcVc
1.3.6.1.4.1.6141.2.60.28.1.1.24.1.1
wwpLeosVplsVirtualSwitchMplsMemberAcVcRowStatus
Description and OID
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, set this object to 'destroy'. If the entry exists, it is displayed as
'active'.
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.24.1.2
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-36 WWP-LEOS-VPLS-MIB
wwpLeosVplsSwitchMplsCtrlProtocolTable
Description and OID
Status
The (conceptual) table listing the l2 virtual switch control frame protocol status current
tunnel for a given Vpls.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.28.1.1.25
wwpLeosVplsSwitchMplsCtrlProtocolEntry
Description and OID
Status
Access
The layer 2 virtual switch control frame protocol tunnel entry for the Vpls.
current
not-accessible
Status
Access
This object represent the list of protocols the device can support.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.25.1
wwpLeosVplsSwitchMplsCtrlProtocolNum
1.3.6.1.4.1.6141.2.60.28.1.1.25.1.1
wwpLeosVplsSwitchMplsCtrlType
Description and OID
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.25.1.2
wwpLeosVplsVirtualSwitchEthTable
Description and OID
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.28.1.1.26
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-37
wwpLeosVplsVirtualSwitchEthEntry
Description and OID
Status
current
This entry corresponds to a single entry in
wwpLeosVplsVirtualSwitchEthernetTable. To create an entry in the table, the
following criteria must be met:
Access
not-accessible
Status
Access
This object specifies the virtual switch index that is used as a unique index in current
the table.
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.1
wwpLeosVplsVirtualSwitchEthName
Description and OID
Status
This object specifies the virtual switch name. It can only be specified at the time current
of creation and cannot be modified later. MPLS and Ethernet virtual switch
names cannot be the same but indexes can.
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.2
wwpLeosVplsVirtualSwitchEthVc
Description and OID
Status
Access
This object specifies the primary virtual circuit ID associated with this virtual
switch. To unset it set it to 0. If this object represents PBT virtual circuit,
wwpLeosVplsVirtualSwitchEthVcType must also be set to 'pbt'.
current
read-create
Status
Access
This object specifies the ingress CoS policy for the given virtual switch.
current
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.3
wwpLeosVplsVirtualSwitchEthEncapCosPolicy
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-38 WWP-LEOS-VPLS-MIB
wwpLeosVplsVirtualSwitchEthEncapFixedDot1dPri
Description and OID
Status
Access
This object specifies the ingress fixed CoS attributes for the given virtual
switch.
current
read-write
Status
Access
This object specifies the egress CoS policy for the given virtual switch.
current
read-write
Status
Access
This object specifies the egress CoS attributes for the given virtual switch.
current
read-write
Status
Access
This object enables or disables control protocol tunneling for a given virtual
switch.
current
read-write
Status
Access
This object can be set to 'createAndGo' to create an entry in the table. This
object can be set to 'destroy' to delete an entry in the table.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.5
wwpLeosVplsVirtualSwitchEthDecapCosPolicy
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.6
wwpLeosVplsVirtualSwitchEthDecapFixedDot1dPri
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.7
wwpLeosVplsVirtualSwitchEthCtrlProtocolTunnelState
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.8
wwpLeosVplsVirtualSwitchEthRowStatus
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.9
wwpLeosVplsVirtualSwitchEthMacLrnState
Description and OID
Setting this object sets the MAC learning state for each Ethernet virtual switch. current
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-39
wwpLeosVplsVirtualSwitchEthTunnelMethod
Description and OID
Status
Setting this object sets the tunneling method for each Ethernet virtual switch. current
Access
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.11
wwpLeosVplsVirtualSwitchEthCtrlProtocolDot1dPri
Description and OID
Status
This object specifies the .1d priority to use when encapsulating control frames. current
Access
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.12
wwpLeosVplsVirtualSwitchEthSubscriberDot1dPolicy
Description and OID
Status
Setting this object configures the policy used to decide whether the subscriber current
frame .1d priority should be left alone or be remarked to the computed provider
priority.
Access
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.13
wwpLeosVplsVirtualSwitchEthCtrlProtTransFrameValidate
Description and OID
Status
Access
Setting this object sets the transparent-mode validate for a given Ethernet
virtual switch.
current
read-write
Status
Access
This object specifies the type of VC to be attached to this virtual switch. This
object must be set (using SNMP multiple set operation) to pbt type if
wwpLeosVplsVirtualSwitchEthVc specifies the pbt vc. Setting only
wwpLeosVplsVirtualSwitchEthVcType returns an error. Also setting
wwpLeosVplsVirtualSwitchEthVcType to none returns an error.
current
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.14
wwpLeosVplsVirtualSwitchEthVcType
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.15
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-40 WWP-LEOS-VPLS-MIB
wwpLeosVplsVirtualSwitchEthHonorPriority
Description and OID
Status
Access
This object specifies which VLAN priority to use on a virtual switch. Honor
either the C-VLAN or the S-VLAN priority through the virtual switch and its
associated VC or tunnel.
current
read-write
Status
Access
current
read-write
Status
Access
current
read-create
Status
Access
deprecated
not-accessible
Status
Access
deprecated
not-accessible
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.16
wwpLeosVplsVirtualSwitchEthDescription
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.17
wwpLeosVplsVirtualSwitchEthReservedVlan
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.18
wwpLeosVplsVirtualSwitchEthMemberTable
1.3.6.1.4.1.6141.2.60.28.1.1.27
wwpLeosVplsVirtualSwitchEthMemberEntry
1.3.6.1.4.1.6141.2.60.28.1.1.27.1
wwpLeosVplsVirtualSwitchEthMemberPortId
1.3.6.1.4.1.6141.2.60.28.1.1.27.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-41
wwpLeosVplsVirtualSwitchEthMemberVlan
Description and OID
Status
This object specifies the subscriber vlan attached to this Ethernet virtual switch current
index wwpLeosVplsVirtualSwitchEthIndx. This object cannot be modified once
the entry is created. This object can only be specified when the entry is created
in this table.
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.27.1.2
wwpLeosVplsVirtualSwitchEthMemberRowStatus
Description and OID
Status
Set this object to 'createandgo' to add an entry in the table. Set this object to current
'destroy' to delete an entry in the table. Refer to description of table entry to see
how to create entries in the table.
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.27.1.3
wwpLeosVplsVirtualSwitchEthMemberEncapCosPolicy
Description and OID
Status
Access
This object specifies the ingress CoS policy for the given member entry.
current
read-write
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.27.1.4
wwpLeosVplsVirtualSwitchEthMemberEncapCosFixedDot1DPri
Description and OID
This object specifies the ingress fixed CoS attributes for given member entry. current
This attribute is only valid when the EncapCosPolicy is set to 'fixed'.
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.27.1.5
wwpLeosVplsVirtualSwitchEthMemberSubscriberDot1dPolicy
Description and OID
Status
This object configures the member policy used to decide if the subscriber
current
frame's 'c-vlan' .1d priority should be left alone ('leave') or be remarked
('provider-inherit') to the resolved provider 's-vlan' priority. This attribute is valid
when the member's SubscriberDot1Policy is 'leave' or 'provider-inherit'. If set
to 'inheritVs', the attribute is inherited from the parent virtual-switch.
Access
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.27.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-42 WWP-LEOS-VPLS-MIB
wwpLeosVplsVirtualSwitchEthMemberStatsTable
Description and OID
Status
Access
The (conceptual) table listing the virtual switch member statistics table.
deprecated
not-accessible
Status
Access
deprecated
not-accessible
Status
Access
This represents the total number of higher 32 bits received for the given virtual current
switch member port.
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.28
wwpLeosVplsVirtualSwitchEthMemberStatsEntry
1.3.6.1.4.1.6141.2.60.28.1.1.28.1
wwpLeosVplsVirtualSwitchEthMemberRxBytesHi
Description and OID
1.3.6.1.4.1.6141.2.60.28.1.1.28.1.1
wwpLeosVplsVirtualSwitchEthMemberRxBytesLo
Description and OID
Status
Access
This represents the total number of lower 32 bits received for the given virtual current
switch member port.
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.28.1.2
wwpLeosVplsSwitchEthCtrlProtocolTable
Description and OID
Status
The (conceptual) table listing the l2 virtual switch control frame protocol status current
tunnel for a given Vpls.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.28.1.1.29
wwpLeosVplsSwitchEthCtrlProtocolEntry
Description and OID
Status
Access
The layer 2 virtual switch control frame protocol tunnel entry for the Vpls.
current
not-accessible
1.3.6.1.4.1.6141.2.60.28.1.1.29.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-43
wwpLeosVplsSwitchEthCtrlProtocolNum
Description and OID
Status
Access
This object represent the list of protocols the device can support.
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.29.1.1
wwpLeosVplsSwitchEthCtrlType
Description and OID
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.29.1.2
wwpLeosVplsVirtualSwitchEtypeTranslationTable
Description and OID
Status
This table controls the global Ethertype translation functions. Only two entries current
are allowed. Creating more than two entries returns an error. The control is bidirectional. Creating one entry enables translation as the packet egresses the
NNI and as it egresses the UNI port.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.28.1.1.30
wwpLeosVplsVirtualSwitchEtypeTranslationEntry
Description and OID
Status
Each entry contains the Ethertype being translated and the new Ethertype that current
is copied over the old Ethertype.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.28.1.1.30.1
wwpLeosVplsVirtualSwitchEtypeTranslationOriginalEtype
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.30.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-44 WWP-LEOS-VPLS-MIB
wwpLeosVplsVirtualSwitchEtypeTranslationMappedEtype
Description and OID
Status
Access
This object represent the Ethertype that is stamped on the frame on egress
and removed on ingress.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.30.1.2
wwpLeosVplsVirtualSwitchEtypeTranslationRowStatus
Description and OID
This object can be set to 'createandgo' to add an entry in the table. This object current
can be set to 'destroy' to delete an entry in the table. Refer to description of
table entry to see how to create entries in the table.
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.30.1.3
wwpLeosVplsTunnelPairTable
Description and OID
Status
This table allows creating tunnel pairs. Having a tunnel pair forces the device current
to accept PBB-TE encapsulated frames on a given pair of tunnels ports and
not on any port. This table is only accessible in PBT mode.
Access
not-accessible
1.3.6.1.4.1.6141.2.60.28.1.1.31
wwpLeosVplsTunnelPairEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This object represents the name of the pair and must be unique. This object
cannot be modified once the entry is created.
current
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.31.1
wwpLeosVplsTunnelPairIndx
1.3.6.1.4.1.6141.2.60.28.1.1.31.1.1
wwpLeosVplsTunnelPairName
1.3.6.1.4.1.6141.2.60.28.1.1.31.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-45
wwpLeosVplsTunnelPairEncapTunnelIndx
Description and OID
Status
Access
This object represents the encap tunnel that is part of this tunnel pair. This
tunnel index should be valid and must exist in
wwpLeosVplsEncapTunnelTable. This object cannot be modified once the
entry is created.
current
read-create
Status
Access
This object represents the decap tunnel that is part of this tunnel pair. This
tunnel index should be valid and must exist in
wwpLeosVplsDecapTunnelTable. This object cannot be modified once the
entry is created.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.31.1.3
wwpLeosVplsTunnelPairDecapTunnelIndx
1.3.6.1.4.1.6141.2.60.28.1.1.31.1.4
wwpLeosVplsTunnelPairRowStatus
Description and OID
This object can be set to 'createandgo' to add an entry in the table. This object current
can be set to 'destroy' to delete an entry in the table. Refer to description of
table entry to see how to create entries in the table.
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.31.1.5
wwpLeosVplsVirtualSwitchMplsEvplMemberTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.28.1.1.32
wwpLeosVplsVirtualSwitchMplsEvplMemberEntry
1.3.6.1.4.1.6141.2.60.28.1.1.32.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-46 WWP-LEOS-VPLS-MIB
wwpLeosVplsVirtualSwitchMplsEvplMemberPortId
Description and OID
Status
This object specifies the port number that is to be added as a customer facing current
port for the mpls virtual switch index wwpLeosVplsVirtualSwitchMplsIndx.
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.32.1.1
wwpLeosVplsVirtualSwitchMplsEvplMemberVlanId
Description and OID
Status
This object specifies the subscriber VLAN attached to the MPLS virtual switch current
index wwpLeosVplsVirtualSwitchMplsIndx. This object cannot be modified
once the entry is created in this table. This object can only be specified when
creating entries in this table.
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.32.1.2
wwpLeosVplsVirtualSwitchMplsEvplMemberRowStatus
Description and OID
Status
Used to manage the creation and deletion of the conceptual rows in this table. current
To create a row in this table, set this object to 'createAndGo'. To delete a row
in this table, set this object to 'destroy'. If the entry exists, it is displayed as
'active'.
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.32.1.3
wwpLeosVplsVirtualSwitchMplsEvplMemberEncapCosPolicy
Description and OID
Status
Access
This object specifies the ingress CoS policy for the given EVPL entry.
current
read-write
Status
Access
This object specifies the ingress fixed CoS attributes for the given member
entry. This attribute is only valid when the EncapCosPolicy is set to 'fixed'
current
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.32.1.4
wwpLeosVplsVirtualSwitchMplsEvplMemberEncapFixedDot1dPri
1.3.6.1.4.1.6141.2.60.28.1.1.32.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-47
wwpLeosVplsVirtualSwitchMplsEvplMemberSubscriberDot1dPolicy
Description and OID
Status
This object configures the member policy used to decide if the subscriber
current
frame's 'c-vlan' .1d priority should be left alone ('leave'), or be remarked
('provider-inherit') to the resolved provider 's-vlan' priority. This attribute is valid
when the member's SubscriberDot1Policy is 'leave' or 'provider-inherit'. If set
to 'inheritVs', the attribute is inherited from the parent virtual-switch
Access
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.32.1.6
wwpLeosVplsVirtualSwitchMplsEvplMemberStatsTable
Description and OID
Status
Access
The (conceptual) table listing the virtual switch member statistics table.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This represents the total number of higher 32 bits received for the given MPLS current
virtual switch member port.
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.33
wwpLeosVplsVirtualSwitchMplsEvplMemberStatsEntry
1.3.6.1.4.1.6141.2.60.28.1.1.33.1
wwpLeosVplsVirtualSwitchMplsEvplMemberRxBytesHi
Description and OID
1.3.6.1.4.1.6141.2.60.28.1.1.33.1.1
wwpLeosVplsVirtualSwitchMplsEvplMemberRxBytesLo
Description and OID
Status
Access
This represents the total number of lower 32 bits received for the given virtual current
switch member port.
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.33.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-48 WWP-LEOS-VPLS-MIB
wwpLeosVplsVirtualSwitchEthEvplMemberTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.34
wwpLeosVplsVirtualSwitchEthEvplMemberEntry
1.3.6.1.4.1.6141.2.60.28.1.1.34.1
wwpLeosVplsVirtualSwitchEthEvplMemberPortId
1.3.6.1.4.1.6141.2.60.28.1.1.34.1.1
wwpLeosVplsVirtualSwitchEthEvplMemberVlan
Description and OID
This object specifies the subscriber vlan attached to this eth virtual switch
current
index wwpLeosVplsVirtualSwitchEthIndx. This object cannot be modified once
the entry is created. This object can only be specified when the entry is created
in this table.
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.34.1.2
wwpLeosVplsVirtualSwitchEthEvplMemberRowStatus
Description and OID
Status
This object can be set to 'createandgo' to add an entry in the table. This object current
can be set to 'destroy' to delete an entry in the table. Refer to description of
table entry to see how to create entries in the table.
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.34.1.3
wwpLeosVplsVirtualSwitchEthEvplMemberEncapCosPolicy
Description and OID
Status
Access
This object specifies the ingress CoS policy for a given EVPL entry.
current
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.34.1.4
39XX/51XX Service Delivery and Aggregation Switches
SAOS 6.11 MIB Set 4.11
Copyright 2013 Ciena Corporation
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-49
wwpLeosVplsVirtualSwitchEthEvplMemberEncapFixedDot1dPri
Description and OID
Status
Access
This object specifies the ingress fixed CoS attributes for the given member
entry. This attribute is only valid when the EncapCosPolicy is set to 'fixed'.
current
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.34.1.5
wwpLeosVplsVirtualSwitchEthEvplMemberSubscriberDot1dPolicy
Description and OID
Status
This object configures the member policy used to decide if the subscriber
current
frame's 'c-vlan' .1d priority should be left alone ('leave'), or be remarked
'provider-inherit' to the resolved provider 's-vlan' priority. This attribute is valid
when the member's SubscriberDot1Policy is 'leave' or 'provider-inherit'. If set
to 'inheritVs', the attribute is inherited from the parent virtual-switch.
Access
read-write
1.3.6.1.4.1.6141.2.60.28.1.1.34.1.6
wwpLeosVplsVirtualSwitchEthEvplMemberTranslateTag
Description and OID
Status
Access
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.34.1.7
wwpLeosVplsVirtualSwitchEthEvplMemberServiceVlanTpid
Description and OID
This object specifies the service VLAN TPID. It is currently only applicable for current
VS instances associated with an MPLS enabled VS
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.34.1.8
wwpLeosVplsVirtualSwitchEthEvplMemberStatsTable
Description and OID
Status
Access
The (conceptual) table listing the virtual switch member statistics table.
current
not-accessible
1.3.6.1.4.1.6141.2.60.28.1.1.35
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-50 WWP-LEOS-VPLS-MIB
wwpLeosVplsVirtualSwitchEthEvplMemberStatsEntry
Description and OID
Status
Access
current
not-accessible
Status
Access
This represents the total number of higher 32 bits received for the given virtual current
switch member port.
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.35.1
wwpLeosVplsVirtualSwitchEthEvplMemberRxBytesHi
Description and OID
1.3.6.1.4.1.6141.2.60.28.1.1.35.1.1
wwpLeosVplsVirtualSwitchEthEvplMemberRxBytesLo
Description and OID
Status
Access
This represents the total number of lower 32 bits received for the given virtual current
switch member port.
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.35.1.2
wwpLeosVplsVirtualCircuitEthTotalStatsTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This represents the total number of higher 32 bits transmitted for the given
virtual circuit.
current
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.36
wwpLeosVplsVirtualCircuitEthTotalStatsEntry
1.3.6.1.4.1.6141.2.60.28.1.1.36.1
wwpLeosVplsVirtualCircuitEthTotalTxBytesHi
1.3.6.1.4.1.6141.2.60.28.1.1.36.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-51
wwpLeosVplsVirtualCircuitEthTotalTxBytesLo
Description and OID
Status
Access
This represents the total number of lower 32 bits transmitted for the given
virtual circuit.
current
read-only
Status
Access
This represents the total number of higher 32 bits received for the given virtual current
circuit.
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.36.1.2
wwpLeosVplsVirtualCircuitEthTotalRxBytesHi
Description and OID
1.3.6.1.4.1.6141.2.60.28.1.1.36.1.3
wwpLeosVplsVirtualCircuitEthTotalRxBytesLo
Description and OID
Status
Access
This represents the total number of lower 32 bits received for the given virtual current
circuit.
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.36.1.4
wwpLeosVplsVirtualCircuitMplsTotalStatsTable
Description and OID
Status
Access
The (conceptual) table listing the mpls virtual circuit statistics table.
current
not-accessible
Status
Access
current
not-accessible
Status
Access
This represents the total number of higher 32 bits transmitted for the given
virtual circuit.
current
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.37
wwpLeosVplsVirtualCircuitMplsTotalStatsEntry
1.3.6.1.4.1.6141.2.60.28.1.1.37.1
wwpLeosVplsVirtualCircuitMplsTotalTxBytesHi
1.3.6.1.4.1.6141.2.60.28.1.1.37.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-52 WWP-LEOS-VPLS-MIB
wwpLeosVplsVirtualCircuitMplsTotalTxBytesLo
Description and OID
Status
Access
This represents the total number of lower 32 bits transmitted for the given
virtual circuit.
current
read-only
Status
Access
This represents the total number of higher 32 bits received for the given MPLS current
virtual circuit.
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.37.1.2
wwpLeosVplsVirtualCircuitMplsTotalRxBytesHi
Description and OID
1.3.6.1.4.1.6141.2.60.28.1.1.37.1.3
wwpLeosVplsVirtualCircuitMplsTotalRxBytesLo
Description and OID
Status
Access
This represents the total number of lower 32 bits received for the given virtual current
circuit.
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.37.1.4
wwpLeosVplsVirtualSwitchEthIpInterfaceMemberTable
Description and OID
Status
Access
current
not-accessible
Status
Access
current
not-accessible
Status
Access
current
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.38
wwpLeosVplsVirtualSwitchEthIpInterfaceMemberEntry
1.3.6.1.4.1.6141.2.60.28.1.1.38.1
wwpLeosVplsVirtualSwitchEthIpIfIndex
1.3.6.1.4.1.6141.2.60.28.1.1.38.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-53
wwpLeosVplsVirtualSwitchEthIpIfName
Description and OID
Status
Access
current
read-only
Status
Access
VLAN ID to be used with this IP interface member. This is the C-VID. The
selected IP interface must have been created without any VLAN.
current
read-create
Status
Access
Setting this object to 'createAndGo' creates the entry. Setting this object to
'destroy' deletes the entry from the table.
current
read-create
Status
Access
current
not-accessible
Status
Access
Virtual Switch L2CFT protocol entry in the Virtual Switch L2CFT Protocol
Table.
current
not-accessible
Status
Access
current
not-accessible
1.3.6.1.4.1.6141.2.60.28.1.1.38.1.2
wwpLeosVplsVirtualSwitchEthIpIfVlan
1.3.6.1.4.1.6141.2.60.28.1.1.38.1.3
wwpLeosVplsVirtualSwitchEthIpIfRowStatus
1.3.6.1.4.1.6141.2.60.28.1.1.38.1.4
wwpLeosVplsVirtualSwitchEthL2CftProtocolTable
1.3.6.1.4.1.6141.2.60.28.1.1.49
wwpLeosVplsVirtualSwitchEthL2CftProtocolEntry
1.3.6.1.4.1.6141.2.60.28.1.1.49.1
wwpLeosVplsVirtualSwitchEthL2CftProtocolType
1.3.6.1.4.1.6141.2.60.28.1.1.49.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-54 WWP-LEOS-VPLS-MIB
wwpLeosVplsVirtualSwitchEthL2CftProtocolDisposition
Description and OID
Status
This object specifies the virtual switch L2 CFT protocol action. May forward or current
drop frames that match this protocol at the virtual switch + RLAN layer
Access
read-create
1.3.6.1.4.1.6141.2.60.28.1.1.49.1.2
wwpLeosVplsVirtualSwitchEthL2CftProtocolRowStatus
Description and OID
Status
Access
To create a row in this table, set this object to 'createAndGo'. To delete the
entry set this to destroy. To update this entry this object cannot be set.
current
read-create
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.49.1.64
wwpLeosVplsVirtualSwitchCFTProtoStatsTable
Description and OID
The (conceptual) table listing the l2 control frame protocol statistics for a given current
vlan.
not-accessible
1.3.6.1.4.1.6141.2.60.28.1.1.50
wwpLeosVplsVirtualSwitchCFTProtoStatsEntry
Description and OID
Status
Access
The layer 2 control frame protocol statistics entry for the vlan.
current
not-accessible
Status
Access
This object specifies the virtual switch index that is used as a unique index in current
the table.
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.50.1
wwpLeosVplsVirtualSwitchCFTProtoStatsEntryVirtualSwitchIndx
Description and OID
1.3.6.1.4.1.6141.2.60.28.1.1.50.1.1
wwpLeosVplsVirtualSwitchCFTProtol2RxPkts
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.50.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-55
wwpLeosVplsVirtualSwitchCFTProtol2TunneledPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Specifies the number of packets that came in tunneled and then restored.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.50.1.3
wwpLeosVplsVirtualSwitchCFTProtol2PeerPkts
1.3.6.1.4.1.6141.2.60.28.1.1.50.1.4
wwpLeosVplsVirtualSwitchCFTProtol2DiscardedPkts
1.3.6.1.4.1.6141.2.60.28.1.1.50.1.5
wwpLeosVplsVirtualSwitchCFTProtol2DecodedPkts
1.3.6.1.4.1.6141.2.60.28.1.1.50.1.6
wwpLeosVplsVirtualSwitchCFTProtol2DecodedFailures
1.3.6.1.4.1.6141.2.60.28.1.1.50.1.7
wwpLeosVplsVirtualSwitchCFTProtol2TunneledSubcriberPortPkts
Description and OID
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.50.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-56 WWP-LEOS-VPLS-MIB
wwpLeosVplsVirtualSwitchCFTProtol2ProtocolNum
Description and OID
Status
Access
current
read-only
Status
Access
1.3.6.1.4.1.6141.2.60.28.1.1.50.1.9
wwpLeosVplsVirtualSwitchCFTProtoTotalStatsTable
Description and OID
The (conceptual) table listing the l2 control frame protocol statistics for a given current
vlan.
not-accessible
1.3.6.1.4.1.6141.2.60.28.1.1.51
wwpLeosVplsVirtualSwitchCFTProtoTotalStatsEntry
Description and OID
Status
Access
The layer 2 control frame protocol statistics entry for the vlan.
current
not-accessible
1.3.6.1.4.1.6141.2.60.28.1.1.51.1
wwpLeosVplsVirtualSwitchCFTProtoTotalStatsEntryVirtualSwitchIndx
Description and OID
Status
Access
This object specifies the virtual switch index that is used as a unique index in current
the table.
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.51.1.1
wwpLeosVplsVirtualSwitchCFTProtoTotall2RxPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.51.1.2
wwpLeosVplsVirtualSwitchCFTProtoTotall2TunneledPkts
1.3.6.1.4.1.6141.2.60.28.1.1.51.1.3
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-LEOS-VPLS-MIB 66-57
wwpLeosVplsVirtualSwitchCFTProtoTotall2PeerPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
Status
Access
Specifies the number of packets that came in tunneled and then restored.
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.51.1.4
wwpLeosVplsVirtualSwitchCFTProtoTotall2DiscardedPkts
1.3.6.1.4.1.6141.2.60.28.1.1.51.1.5
wwpLeosVplsVirtualSwitchCFTProtoTotall2DecodedPkts
1.3.6.1.4.1.6141.2.60.28.1.1.51.1.6
wwpLeosVplsVirtualSwitchCFTProtoTotall2DecodedFailures
1.3.6.1.4.1.6141.2.60.28.1.1.51.1.7
wwpLeosVplsVirtualSwitchCFTProtoTotall2TunneledSubcriberPortPkts
Description and OID
Status
Access
current
read-only
Status
Access
current
read-only
1.3.6.1.4.1.6141.2.60.28.1.1.51.1.8
wwpLeosVplsVirtualSwitchCFTProtoTotall2ProtocolNum
1.3.6.1.4.1.6141.2.60.28.1.1.51.1.9
Notifications
This MIB module does not support any notifications.
MIB Reference
009-3220-011 Standard Revision A
August 2013
66-58 WWP-LEOS-VPLS-MIB
MIB Reference
009-3220-011 Standard Revision A
August 2013
67-1
WWP-PRODUCTS-MIB
2-
Object Identifier
wwpLe21
1.3.6.1.4.1.6141.1.1
wwpLe22
1.3.6.1.4.1.6141.1.2
wwpLe31
1.3.6.1.4.1.6141.1.3
wwpLe32
1.3.6.1.4.1.6141.1.4
wwpLe41
1.3.6.1.4.1.6141.1.5
wwpLe42
1.3.6.1.4.1.6141.1.6
wwpLe200
1.3.6.1.4.1.6141.1.7
wwpLe210
1.3.6.1.4.1.6141.1.8
wwpLe220
1.3.6.1.4.1.6141.1.9
wwpLe410
1.3.6.1.4.1.6141.1.10
wwpLe3700
1.3.6.1.4.1.6141.1.11
wwpLe4400
1.3.6.1.4.1.6141.1.12
wwpLe211
1.3.6.1.4.1.6141.1.13
wwpLe211H
1.3.6.1.4.1.6141.1.14
wwpLe216
1.3.6.1.4.1.6141.1.15
wwpLe216H
1.3.6.1.4.1.6141.1.16
wwpLe218
1.3.6.1.4.1.6141.1.17
wwpLe218H
1.3.6.1.4.1.6141.1.18
wwpLe410H
1.3.6.1.4.1.6141.1.19
MIB Reference
009-3220-011 Standard Revision A
August 2013
67-2 WWP-PRODUCTS-MIB
Name
Object Identifier
wwpLe22H
1.3.6.1.4.1.6141.1.20
wwpLe32H
1.3.6.1.4.1.6141.1.21
wwpLe36
1.3.6.1.4.1.6141.1.22
wwpLe36H
1.3.6.1.4.1.6141.1.23
wwpLe217
1.3.6.1.4.1.6141.1.24
wwpLe217H
1.3.6.1.4.1.6141.1.25
wwpLe217DC
1.3.6.1.4.1.6141.1.26
wwpLe410DC
1.3.6.1.4.1.6141.1.27
wwpLe317
1.3.6.1.4.1.6141.1.28
wwpLe317H
1.3.6.1.4.1.6141.1.29
wwpLe317DC
1.3.6.1.4.1.6141.1.30
wwpLe38
1.3.6.1.4.1.6141.1.31
wwpLe46
1.3.6.1.4.1.6141.1.32
wwpLe46Voip
1.3.6.1.4.1.6141.1.33
wwpLe42H
1.3.6.1.4.1.6141.1.34
wwpLe42HVoip
1.3.6.1.4.1.6141.1.35
wwpLe407
1.3.6.1.4.1.6141.1.36
wwpLe427
1.3.6.1.4.1.6141.1.37
wwpLe307
1.3.6.1.4.1.6141.1.38
wwpLe327
1.3.6.1.4.1.6141.1.39
wwpLe337
1.3.6.1.4.1.6141.1.40
wwpLe22P0100
1.3.6.1.4.1.6141.1.41
wwpLe46H
1.3.6.1.4.1.6141.1.42
wwpLe46HVoip
1.3.6.1.4.1.6141.1.43
wwpLe42Voip
1.3.6.1.4.1.6141.1.44
wwpLe17
1.3.6.1.4.1.6141.1.45
wwpLe17Voip
1.3.6.1.4.1.6141.1.46
wwpLe311
1.3.6.1.4.1.6141.1.47
wwpLe38Sfp
1.3.6.1.4.1.6141.1.48
MIB Reference
009-3220-011 Standard Revision A
August 2013
WWP-PRODUCTS-MIB 2-3
Name
Object Identifier
wwpLe38SfpVoip
1.3.6.1.4.1.6141.1.49
wwpLe311v
1.3.6.1.4.1.6141.1.70
wwpLe310
1.3.6.1.4.1.6141.1.71
wwpLe135
1.3.6.1.4.1.6141.1.72
wwpLe3300
1.3.6.1.4.1.6141.1.73
wwpLe3300Rev2
1.3.6.1.4.1.6141.1.74
wwpLe3300FanTray
1.3.6.1.4.1.6141.1.75
wwpLe58H
1.3.6.1.4.1.6141.1.76
cn3920
1.3.6.1.4.1.6141.1.77
cn3911
1.3.6.1.4.1.6141.1.78
cn3940
1.3.6.1.4.1.6141.1.79
cn5150
1.3.6.1.4.1.6141.1.80
cn3960
1.3.6.1.4.1.6141.1.81
cn5140
1.3.6.1.4.1.6141.1.82
cn5305
1.3.6.1.4.1.6141.1.83
cn3916
1.3.6.1.4.1.6141.1.84
cn3930
1.3.6.1.4.1.6141.1.85
cn3931
1.3.6.1.4.1.6141.1.86
cn3902
1.3.6.1.4.1.6141.1.94
cn3932
1.3.6.1.4.1.6141.1.95
cn5142
1.3.6.1.4.1.6141.1.96
cn5160
1.3.6.1.4.1.6141.1.97
MIB Reference
009-3220-011 Standard Revision A
August 2013
67-4 WWP-PRODUCTS-MIB
MIB Reference
009-3220-011 Standard Revision A
August 2013
68-1
WWP-SMI
3-
This chapter provides the object identifier names and descriptions for the
WWP-SMI module.
Name
Description
wwpProducts
wwpModules
wwpModulesLeos
wwpModulesLeosTce
MIB Reference
009-3220-011 Standard Revision A
August 2013
68-2 WWP-SMI
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-1
Statistics
4-
This chapter provides the name, OID, and module for objects used for
statistics.
Object
OID
cienaCesAclBadDscp
1.3.6.1.4.1.1271.2.1.25.1.1.5
cienaCesAclBadPort
1.3.6.1.4.1.1271.2.1.25.1.1.4
cienaCesAclBadProtocol
1.3.6.1.4.1.1271.2.1.25.1.1.9
cienaCesAclCacheHit
1.3.6.1.4.1.1271.2.1.25.1.1.2
cienaCesAclEntryBadDscp
1.3.6.1.4.1.1271.2.1.25.1.2.1.1.7
cienaCesAclEntryBadPort
1.3.6.1.4.1.1271.2.1.25.1.2.1.1.5
cienaCesAclEntryHits
1.3.6.1.4.1.1271.2.1.25.1.2.1.1.4
cienaCesAclInUseEntries
1.3.6.1.4.1.1271.2.1.25.1.1.7
cienaCesAclMaxEntries
1.3.6.1.4.1.1271.2.1.25.1.1.8
cienaCesAclNoHit
1.3.6.1.4.1.1271.2.1.25.1.1.3
cienaCesExtAclEntryBadDscp
1.3.6.1.4.1.1271.2.1.25.1.2.2.1.16
cienaCesExtAclEntryBadPort
1.3.6.1.4.1.1271.2.1.25.1.2.2.1.14
cienaCesExtAclEntryBadProtocol
1.3.6.1.4.1.1271.2.1.25.1.2.2.1.19
cienaCesExtAclEntryHits
1.3.6.1.4.1.1271.2.1.25.1.2.2.1.13
cienaCesMplsTunnelPathUseCount
1.3.6.1.4.1.1271.2.1.18.1.1.8.1.1.3
cienaCesPmAccessAllTimeBinAccessHitBytes
1.3.6.1.4.1.1271.2.3.1.2.3.4.5.1.3
cienaCesPmAccessAllTimeBinAccessHitFrames
1.3.6.1.4.1.1271.2.3.1.2.3.4.5.1.4
cienaCesPmAccessCurr24HBinAccessHitBytes
1.3.6.1.4.1.1271.2.3.1.2.3.4.3.1.6
cienaCesPmAccessCurr24HBinAccessHitFrames
1.3.6.1.4.1.1271.2.3.1.2.3.4.3.1.7
cienaCesPmAccessCurrBinAccessHitBytes
1.3.6.1.4.1.1271.2.3.1.2.3.4.2.1.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-2 Statistics
Object
OID
cienaCesPmAccessCurrBinAccessHitFrames
1.3.6.1.4.1.1271.2.3.1.2.3.4.2.1.6
cienaCesPmAccessHist24HBinAccessHitBytes
1.3.6.1.4.1.1271.2.3.1.2.3.4.4.1.4
cienaCesPmAccessHist24HBinAccessHitFrames
1.3.6.1.4.1.1271.2.3.1.2.3.4.4.1.5
cienaCesPmAccessHistoryBinAccessHitBytes
1.3.6.1.4.1.1271.2.3.1.2.3.4.1.1.7
cienaCesPmAccessHistoryBinAccessHitFrames
1.3.6.1.4.1.1271.2.3.1.2.3.4.1.1.8
cienaCesPmBasicRxAllTimeBinBasicRxAcceptedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.5.1.1
cienaCesPmBasicRxAllTimeBinBasicRxAcceptedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.5.1.2
cienaCesPmBasicRxAllTimeBinBasicRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.6.5.1.7
cienaCesPmBasicRxAllTimeBinBasicRxDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.5.1.5
cienaCesPmBasicRxAllTimeBinBasicRxDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.5.1.6
cienaCesPmBasicRxAllTimeBinBasicRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.6.5.1.8
cienaCesPmBasicRxAllTimeBinBasicRxYellowBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.5.1.3
cienaCesPmBasicRxAllTimeBinBasicRxYellowFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.5.1.4
cienaCesPmBasicRxCurr24HBinBasicRxAcceptedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.3.1.6
cienaCesPmBasicRxCurr24HBinBasicRxAcceptedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.3.1.7
cienaCesPmBasicRxCurr24HBinBasicRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.6.3.1.12
cienaCesPmBasicRxCurr24HBinBasicRxDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.3.1.10
cienaCesPmBasicRxCurr24HBinBasicRxDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.3.1.11
cienaCesPmBasicRxCurr24HBinBasicRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.6.3.1.13
cienaCesPmBasicRxCurr24HBinBasicRxYellowBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.3.1.8
cienaCesPmBasicRxCurr24HBinBasicRxYellowFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.3.1.9
cienaCesPmBasicRxCurrBinBasicRxAcceptedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.2.1.5
cienaCesPmBasicRxCurrBinBasicRxAcceptedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.2.1.6
cienaCesPmBasicRxCurrBinBasicRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.6.2.1.11
cienaCesPmBasicRxCurrBinBasicRxDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.2.1.9
cienaCesPmBasicRxCurrBinBasicRxDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.2.1.10
cienaCesPmBasicRxCurrBinBasicRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.6.2.1.12
cienaCesPmBasicRxCurrBinBasicRxYellowBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.2.1.7
cienaCesPmBasicRxCurrBinBasicRxYellowFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.2.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-3
Object
OID
cienaCesPmBasicRxHist24HBinBasicRxAcceptedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.4.1.4
cienaCesPmBasicRxHist24HBinBasicRxAcceptedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.4.1.5
cienaCesPmBasicRxHist24HBinBasicRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.6.4.1.10
cienaCesPmBasicRxHist24HBinBasicRxDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.4.1.8
cienaCesPmBasicRxHist24HBinBasicRxDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.4.1.9
cienaCesPmBasicRxHist24HBinBasicRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.6.4.1.11
cienaCesPmBasicRxHist24HBinBasicRxYellowBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.4.1.6
cienaCesPmBasicRxHist24HBinBasicRxYellowFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.4.1.7
cienaCesPmBasicRxHistoryBinBasicRxAcceptedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.7
cienaCesPmBasicRxHistoryBinBasicRxAcceptedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.8
cienaCesPmBasicRxHistoryBinBasicRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.13
cienaCesPmBasicRxHistoryBinBasicRxDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.11
cienaCesPmBasicRxHistoryBinBasicRxDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.12
cienaCesPmBasicRxHistoryBinBasicRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.14
cienaCesPmBasicRxHistoryBinBasicRxYellowBytes
1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.9
cienaCesPmBasicRxHistoryBinBasicRxYellowFrames
1.3.6.1.4.1.1271.2.3.1.2.3.6.1.1.10
cienaCesPmBasicTxRxAllTimeBinBasicRxAcceptedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.5.1.1
cienaCesPmBasicTxRxAllTimeBinBasicRxAcceptedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.5.1.2
cienaCesPmBasicTxRxAllTimeBinBasicRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.5.1.9
cienaCesPmBasicTxRxAllTimeBinBasicRxDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.5.1.5
cienaCesPmBasicTxRxAllTimeBinBasicRxDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.5.1.6
cienaCesPmBasicTxRxAllTimeBinBasicRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.5.1.10
cienaCesPmBasicTxRxAllTimeBinBasicRxYellowBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.5.1.3
cienaCesPmBasicTxRxAllTimeBinBasicRxYellowFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.5.1.4
cienaCesPmBasicTxRxAllTimeBinBasicTxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.5.1.11
cienaCesPmBasicTxRxAllTimeBinBasicTxForwardedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.5.1.7
cienaCesPmBasicTxRxAllTimeBinBasicTxForwardedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.5.1.8
cienaCesPmBasicTxRxAllTimeBinBasicTxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.5.1.12
cienaCesPmBasicTxRxCurr24HBinRxAcceptedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-4 Statistics
Object
OID
cienaCesPmBasicTxRxCurr24HBinRxAcceptedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.7
cienaCesPmBasicTxRxCurr24HBinRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.14
cienaCesPmBasicTxRxCurr24HBinRxDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.10
cienaCesPmBasicTxRxCurr24HBinRxDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.11
cienaCesPmBasicTxRxCurr24HBinRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.15
cienaCesPmBasicTxRxCurr24HBinRxYellowBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.8
cienaCesPmBasicTxRxCurr24HBinRxYellowFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.9
cienaCesPmBasicTxRxCurr24HBinTxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.16
cienaCesPmBasicTxRxCurr24HBinTxForwardedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.12
cienaCesPmBasicTxRxCurr24HBinTxForwardedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.13
cienaCesPmBasicTxRxCurr24HBinTxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.3.1.17
cienaCesPmBasicTxRxCurrBinRxAcceptedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.5
cienaCesPmBasicTxRxCurrBinRxAcceptedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.6
cienaCesPmBasicTxRxCurrBinRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.13
cienaCesPmBasicTxRxCurrBinRxDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.9
cienaCesPmBasicTxRxCurrBinRxDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.10
cienaCesPmBasicTxRxCurrBinRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.14
cienaCesPmBasicTxRxCurrBinRxYellowBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.7
cienaCesPmBasicTxRxCurrBinRxYellowFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.8
cienaCesPmBasicTxRxCurrBinTxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.15
cienaCesPmBasicTxRxCurrBinTxForwardedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.11
cienaCesPmBasicTxRxCurrBinTxForwardedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.12
cienaCesPmBasicTxRxCurrBinTxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.2.1.16
cienaCesPmBasicTxRxHist24HBinBasicRxAcceptedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.4
cienaCesPmBasicTxRxHist24HBinBasicRxAcceptedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.5
cienaCesPmBasicTxRxHist24HBinBasicRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.12
cienaCesPmBasicTxRxHist24HBinBasicRxDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.8
cienaCesPmBasicTxRxHist24HBinBasicRxDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.9
cienaCesPmBasicTxRxHist24HBinBasicRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.13
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-5
Object
OID
cienaCesPmBasicTxRxHist24HBinBasicRxYellowBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.6
cienaCesPmBasicTxRxHist24HBinBasicRxYellowFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.7
cienaCesPmBasicTxRxHist24HBinBasicTxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.14
cienaCesPmBasicTxRxHist24HBinBasicTxForwardedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.10
cienaCesPmBasicTxRxHist24HBinBasicTxForwardedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.11
cienaCesPmBasicTxRxHist24HBinBasicTxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.4.1.15
cienaCesPmBasicTxRxHistoryBinRxAcceptedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.7
cienaCesPmBasicTxRxHistoryBinRxAcceptedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.8
cienaCesPmBasicTxRxHistoryBinRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.15
cienaCesPmBasicTxRxHistoryBinRxDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.11
cienaCesPmBasicTxRxHistoryBinRxDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.12
cienaCesPmBasicTxRxHistoryBinRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.16
cienaCesPmBasicTxRxHistoryBinRxYellowBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.9
cienaCesPmBasicTxRxHistoryBinRxYellowFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.10
cienaCesPmBasicTxRxHistoryBinTxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.17
cienaCesPmBasicTxRxHistoryBinTxForwardedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.13
cienaCesPmBasicTxRxHistoryBinTxForwardedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.14
cienaCesPmBasicTxRxHistoryBinTxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.2.1.1.18
cienaCesPmEgressQueueAllTimeBinMulticastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.7.5.1.5
cienaCesPmEgressQueueAllTimeBinMulticastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.7.5.1.6
cienaCesPmEgressQueueAllTimeBinMulticastEnqueuedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.7.5.1.3
cienaCesPmEgressQueueAllTimeBinMulticastEnqueuedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.7.5.1.4
cienaCesPmEgressQueueAllTimeBinUnicastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.7.5.1.1
cienaCesPmEgressQueueAllTimeBinUnicastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.7.5.1.2
cienaCesPmEgressQueueCurr24HBinMulticastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.7.3.1.10
cienaCesPmEgressQueueCurr24HBinMulticastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.7.3.1.11
cienaCesPmEgressQueueCurr24HBinMulticastEnqueuedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.7.3.1.8
cienaCesPmEgressQueueCurr24HBinMulticastEnqueuedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.7.3.1.9
cienaCesPmEgressQueueCurr24HBinUnicastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.7.3.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-6 Statistics
Object
OID
cienaCesPmEgressQueueCurr24HBinUnicastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.7.3.1.7
cienaCesPmEgressQueueCurrBinMulticastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.7.2.1.9
cienaCesPmEgressQueueCurrBinMulticastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.7.2.1.10
cienaCesPmEgressQueueCurrBinMulticastEnqueuedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.7.2.1.7
cienaCesPmEgressQueueCurrBinMulticastEnqueuedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.7.2.1.8
cienaCesPmEgressQueueCurrBinUnicastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.7.2.1.5
cienaCesPmEgressQueueCurrBinUnicastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.7.2.1.6
cienaCesPmEgressQueueHist24HBinMulticastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.7.4.1.8
cienaCesPmEgressQueueHist24HBinMulticastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.7.4.1.9
cienaCesPmEgressQueueHist24HBinMulticastEnqueuedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.7.4.1.6
cienaCesPmEgressQueueHist24HBinMulticastEnqueuedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.7.4.1.7
cienaCesPmEgressQueueHist24HBinUnicastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.7.4.1.4
cienaCesPmEgressQueueHist24HBinUnicastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.7.4.1.5
cienaCesPmEgressQueueHistoryBinMulticastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.7.1.1.11
cienaCesPmEgressQueueHistoryBinMulticastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.7.1.1.12
cienaCesPmEgressQueueHistoryBinMulticastEnqueuedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.7.1.1.9
cienaCesPmEgressQueueHistoryBinMulticastEnqueuedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.7.1.1.10
cienaCesPmEgressQueueHistoryBinUnicastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.7.1.1.7
cienaCesPmEgressQueueHistoryBinUnicastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.7.1.1.8
cienaCesPmExtendedTxRxAllTimeBin1024To1518OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.15
cienaCesPmExtendedTxRxAllTimeBin128To255OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.12
cienaCesPmExtendedTxRxAllTimeBin256To511OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.13
cienaCesPmExtendedTxRxAllTimeBin512To1023OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.14
cienaCesPmExtendedTxRxAllTimeBin64OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.10
cienaCesPmExtendedTxRxAllTimeBin65To127OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.11
cienaCesPmExtendedTxRxAllTimeBinDropEvents
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.31
cienaCesPmExtendedTxRxAllTimeBinFragmentsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.8
cienaCesPmExtendedTxRxAllTimeBinInDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.32
cienaCesPmExtendedTxRxAllTimeBinJabbersPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-7
Object
OID
cienaCesPmExtendedTxRxAllTimeBinOversizePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.7
cienaCesPmExtendedTxRxAllTimeBinRxBcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.5
cienaCesPmExtendedTxRxAllTimeBinRxBytes
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.1
cienaCesPmExtendedTxRxAllTimeBinRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.35
cienaCesPmExtendedTxRxAllTimeBinRxCrcErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.3
cienaCesPmExtendedTxRxAllTimeBinRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.36
cienaCesPmExtendedTxRxAllTimeBinRxLOutRangePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.39
cienaCesPmExtendedTxRxAllTimeBinRxMcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.4
cienaCesPmExtendedTxRxAllTimeBinRxPausePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.34
cienaCesPmExtendedTxRxAllTimeBinRxPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.2
cienaCesPmExtendedTxRxAllTimeBinTxBcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.19
cienaCesPmExtendedTxRxAllTimeBinTxBytes
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.16
cienaCesPmExtendedTxRxAllTimeBinTxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.37
cienaCesPmExtendedTxRxAllTimeBinTxCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.30
cienaCesPmExtendedTxRxAllTimeBinTxCrcErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.24
cienaCesPmExtendedTxRxAllTimeBinTxExCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.28
cienaCesPmExtendedTxRxAllTimeBinTxExDeferPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.21
cienaCesPmExtendedTxRxAllTimeBinTxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.38
cienaCesPmExtendedTxRxAllTimeBinTxGiantPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.22
cienaCesPmExtendedTxRxAllTimeBinTxLateCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.27
cienaCesPmExtendedTxRxAllTimeBinTxLCheckErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.25
cienaCesPmExtendedTxRxAllTimeBinTxLOutRangePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.26
cienaCesPmExtendedTxRxAllTimeBinTxMcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.20
cienaCesPmExtendedTxRxAllTimeBinTxPausePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.33
cienaCesPmExtendedTxRxAllTimeBinTxPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.18
cienaCesPmExtendedTxRxAllTimeBinTxSingleCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.29
cienaCesPmExtendedTxRxAllTimeBinTxTBytes
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.17
cienaCesPmExtendedTxRxAllTimeBinTxUnderRunPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.23
cienaCesPmExtendedTxRxAllTimeBinUndersizePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.5.1.6
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-8 Statistics
Object
OID
cienaCesPmExtendedTxRxCurr24HBin1024To1518OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.20
cienaCesPmExtendedTxRxCurr24HBin128To255OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.17
cienaCesPmExtendedTxRxCurr24HBin256To511OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.18
cienaCesPmExtendedTxRxCurr24HBin512To1023OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.19
cienaCesPmExtendedTxRxCurr24HBin64OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.15
cienaCesPmExtendedTxRxCurr24HBin65To127OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.16
cienaCesPmExtendedTxRxCurr24HBinDropEvents
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.36
cienaCesPmExtendedTxRxCurr24HBinFragmentsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.13
cienaCesPmExtendedTxRxCurr24HBinInDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.37
cienaCesPmExtendedTxRxCurr24HBinJabbersPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.14
cienaCesPmExtendedTxRxCurr24HBinOversizePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.12
cienaCesPmExtendedTxRxCurr24HBinRxBcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.10
cienaCesPmExtendedTxRxCurr24HBinRxBytes
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.6
cienaCesPmExtendedTxRxCurr24HBinRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.40
cienaCesPmExtendedTxRxCurr24HBinRxCrcErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.8
cienaCesPmExtendedTxRxCurr24HBinRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.41
cienaCesPmExtendedTxRxCurr24HBinRxLOutRangePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.44
cienaCesPmExtendedTxRxCurr24HBinRxMcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.9
cienaCesPmExtendedTxRxCurr24HBinRxPausePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.39
cienaCesPmExtendedTxRxCurr24HBinRxPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.7
cienaCesPmExtendedTxRxCurr24HBinTxBcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.24
cienaCesPmExtendedTxRxCurr24HBinTxBytes
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.21
cienaCesPmExtendedTxRxCurr24HBinTxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.42
cienaCesPmExtendedTxRxCurr24HBinTxCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.35
cienaCesPmExtendedTxRxCurr24HBinTxCrcErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.29
cienaCesPmExtendedTxRxCurr24HBinTxExCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.33
cienaCesPmExtendedTxRxCurr24HBinTxExDeferPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.26
cienaCesPmExtendedTxRxCurr24HBinTxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.43
cienaCesPmExtendedTxRxCurr24HBinTxGiantPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.27
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-9
Object
OID
cienaCesPmExtendedTxRxCurr24HBinTxLateCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.32
cienaCesPmExtendedTxRxCurr24HBinTxLCheckErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.30
cienaCesPmExtendedTxRxCurr24HBinTxLOutRangePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.31
cienaCesPmExtendedTxRxCurr24HBinTxMcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.25
cienaCesPmExtendedTxRxCurr24HBinTxPausePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.38
cienaCesPmExtendedTxRxCurr24HBinTxPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.23
cienaCesPmExtendedTxRxCurr24HBinTxSingleCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.34
cienaCesPmExtendedTxRxCurr24HBinTxTBytes
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.22
cienaCesPmExtendedTxRxCurr24HBinTxUnderRunPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.28
cienaCesPmExtendedTxRxCurr24HBinUndersizePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.3.1.11
cienaCesPmExtendedTxRxCurrBin1024To1518OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.19
cienaCesPmExtendedTxRxCurrBin128To255OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.16
cienaCesPmExtendedTxRxCurrBin256To511OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.17
cienaCesPmExtendedTxRxCurrBin512To1023OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.18
cienaCesPmExtendedTxRxCurrBin64OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.14
cienaCesPmExtendedTxRxCurrBin65To127OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.15
cienaCesPmExtendedTxRxCurrBinDropEvents
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.35
cienaCesPmExtendedTxRxCurrBinFragmentsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.12
cienaCesPmExtendedTxRxCurrBinInDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.36
cienaCesPmExtendedTxRxCurrBinJabbersPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.13
cienaCesPmExtendedTxRxCurrBinOversizePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.11
cienaCesPmExtendedTxRxCurrBinRxBcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.9
cienaCesPmExtendedTxRxCurrBinRxBytes
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.5
cienaCesPmExtendedTxRxCurrBinRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.39
cienaCesPmExtendedTxRxCurrBinRxCrcErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.7
cienaCesPmExtendedTxRxCurrBinRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.40
cienaCesPmExtendedTxRxCurrBinRxLOutRangePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.43
cienaCesPmExtendedTxRxCurrBinRxMcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.8
cienaCesPmExtendedTxRxCurrBinRxPausePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.38
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-10 Statistics
Object
OID
cienaCesPmExtendedTxRxCurrBinRxPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.6
cienaCesPmExtendedTxRxCurrBinTxBcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.23
cienaCesPmExtendedTxRxCurrBinTxBytes
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.20
cienaCesPmExtendedTxRxCurrBinTxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.41
cienaCesPmExtendedTxRxCurrBinTxCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.34
cienaCesPmExtendedTxRxCurrBinTxCrcErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.28
cienaCesPmExtendedTxRxCurrBinTxExCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.32
cienaCesPmExtendedTxRxCurrBinTxExDeferPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.25
cienaCesPmExtendedTxRxCurrBinTxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.42
cienaCesPmExtendedTxRxCurrBinTxGiantPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.26
cienaCesPmExtendedTxRxCurrBinTxLateCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.31
cienaCesPmExtendedTxRxCurrBinTxLCheckErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.29
cienaCesPmExtendedTxRxCurrBinTxLOutRangePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.30
cienaCesPmExtendedTxRxCurrBinTxMcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.24
cienaCesPmExtendedTxRxCurrBinTxPausePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.37
cienaCesPmExtendedTxRxCurrBinTxPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.22
cienaCesPmExtendedTxRxCurrBinTxSingleCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.33
cienaCesPmExtendedTxRxCurrBinTxTBytes
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.21
cienaCesPmExtendedTxRxCurrBinTxUnderRunPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.27
cienaCesPmExtendedTxRxCurrBinUndersizePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.2.1.10
cienaCesPmExtendedTxRxHist24HBin1024To1518OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.18
cienaCesPmExtendedTxRxHist24HBin128To255OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.15
cienaCesPmExtendedTxRxHist24HBin256To511OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.16
cienaCesPmExtendedTxRxHist24HBin512To1023OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.17
cienaCesPmExtendedTxRxHist24HBin64OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.13
cienaCesPmExtendedTxRxHist24HBin65To127OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.14
cienaCesPmExtendedTxRxHist24HBinDropEvents
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.34
cienaCesPmExtendedTxRxHist24HBinFragmentsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.11
cienaCesPmExtendedTxRxHist24HBinInDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.35
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-11
Object
OID
cienaCesPmExtendedTxRxHist24HBinJabbersPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.12
cienaCesPmExtendedTxRxHist24HBinOversizePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.10
cienaCesPmExtendedTxRxHist24HBinRxBcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.8
cienaCesPmExtendedTxRxHist24HBinRxBytes
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.4
cienaCesPmExtendedTxRxHist24HBinRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.38
cienaCesPmExtendedTxRxHist24HBinRxCrcErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.6
cienaCesPmExtendedTxRxHist24HBinRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.39
cienaCesPmExtendedTxRxHist24HBinRxLOutRangePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.42
cienaCesPmExtendedTxRxHist24HBinRxMcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.7
cienaCesPmExtendedTxRxHist24HBinRxPausePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.37
cienaCesPmExtendedTxRxHist24HBinRxPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.5
cienaCesPmExtendedTxRxHist24HBinTxBcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.22
cienaCesPmExtendedTxRxHist24HBinTxBytes
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.19
cienaCesPmExtendedTxRxHist24HBinTxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.40
cienaCesPmExtendedTxRxHist24HBinTxCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.33
cienaCesPmExtendedTxRxHist24HBinTxCrcErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.27
cienaCesPmExtendedTxRxHist24HBinTxExCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.31
cienaCesPmExtendedTxRxHist24HBinTxExDeferPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.24
cienaCesPmExtendedTxRxHist24HBinTxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.41
cienaCesPmExtendedTxRxHist24HBinTxGiantPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.25
cienaCesPmExtendedTxRxHist24HBinTxLateCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.30
cienaCesPmExtendedTxRxHist24HBinTxLCheckErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.28
cienaCesPmExtendedTxRxHist24HBinTxLOutRangePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.29
cienaCesPmExtendedTxRxHist24HBinTxMcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.23
cienaCesPmExtendedTxRxHist24HBinTxPausePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.36
cienaCesPmExtendedTxRxHist24HBinTxPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.21
cienaCesPmExtendedTxRxHist24HBinTxSingleCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.32
cienaCesPmExtendedTxRxHist24HBinTxTBytes
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.20
cienaCesPmExtendedTxRxHist24HBinTxUnderRunPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.26
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-12 Statistics
Object
OID
cienaCesPmExtendedTxRxHist24HBinUndersizePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.4.1.9
cienaCesPmExtendedTxRxHistoryBin1024To1518OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.21
cienaCesPmExtendedTxRxHistoryBin128To255OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.18
cienaCesPmExtendedTxRxHistoryBin256To511OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.19
cienaCesPmExtendedTxRxHistoryBin512To1023OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.20
cienaCesPmExtendedTxRxHistoryBin64OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.16
cienaCesPmExtendedTxRxHistoryBin65To127OctsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.17
cienaCesPmExtendedTxRxHistoryBinDropEvents
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.37
cienaCesPmExtendedTxRxHistoryBinFragmentsPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.14
cienaCesPmExtendedTxRxHistoryBinInDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.38
cienaCesPmExtendedTxRxHistoryBinJabbersPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.15
cienaCesPmExtendedTxRxHistoryBinOversizePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.13
cienaCesPmExtendedTxRxHistoryBinRxBcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.11
cienaCesPmExtendedTxRxHistoryBinRxBytes
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.7
cienaCesPmExtendedTxRxHistoryBinRxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.41
cienaCesPmExtendedTxRxHistoryBinRxCrcErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.9
cienaCesPmExtendedTxRxHistoryBinRxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.42
cienaCesPmExtendedTxRxHistoryBinRxLOutRangePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.45
cienaCesPmExtendedTxRxHistoryBinRxMcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.10
cienaCesPmExtendedTxRxHistoryBinRxPausePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.40
cienaCesPmExtendedTxRxHistoryBinRxPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.8
cienaCesPmExtendedTxRxHistoryBinTxBcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.25
cienaCesPmExtendedTxRxHistoryBinTxBytes
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.22
cienaCesPmExtendedTxRxHistoryBinTxBytesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.43
cienaCesPmExtendedTxRxHistoryBinTxCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.36
cienaCesPmExtendedTxRxHistoryBinTxCrcErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.30
cienaCesPmExtendedTxRxHistoryBinTxExCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.34
cienaCesPmExtendedTxRxHistoryBinTxExDeferPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.27
cienaCesPmExtendedTxRxHistoryBinTxFramesPerSec
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.44
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-13
Object
OID
cienaCesPmExtendedTxRxHistoryBinTxGiantPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.28
cienaCesPmExtendedTxRxHistoryBinTxLateCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.33
cienaCesPmExtendedTxRxHistoryBinTxLCheckErrorPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.31
cienaCesPmExtendedTxRxHistoryBinTxLOutRangePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.32
cienaCesPmExtendedTxRxHistoryBinTxMcastPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.26
cienaCesPmExtendedTxRxHistoryBinTxPausePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.39
cienaCesPmExtendedTxRxHistoryBinTxPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.24
cienaCesPmExtendedTxRxHistoryBinTxSingleCollPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.35
cienaCesPmExtendedTxRxHistoryBinTxTBytes
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.23
cienaCesPmExtendedTxRxHistoryBinTxUnderRunPkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.29
cienaCesPmExtendedTxRxHistoryBinUndersizePkts
1.3.6.1.4.1.1271.2.3.1.2.3.1.1.1.12
cienaCesPmFloodContainerAllTimeBinBcastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.5.5.1.1
cienaCesPmFloodContainerAllTimeBinBcastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.5.5.1.2
cienaCesPmFloodContainerAllTimeBinL2McastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.5.5.1.3
cienaCesPmFloodContainerAllTimeBinL2McastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.5.5.1.4
cienaCesPmFloodContainerAllTimeBinUnknownUnicastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.5.5.1.5
cienaCesPmFloodContainerAllTimeBinUnknownUnicastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.5.5.1.6
cienaCesPmFloodContainerCurr24HBinBcastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.5.3.1.6
cienaCesPmFloodContainerCurr24HBinBcastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.5.3.1.7
cienaCesPmFloodContainerCurr24HBinL2McastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.5.3.1.8
cienaCesPmFloodContainerCurr24HBinL2McastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.5.3.1.9
cienaCesPmFloodContainerCurr24HBinUnknownUnicastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.5.3.1.10
cienaCesPmFloodContainerCurr24HBinUnknownUnicastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.5.3.1.11
cienaCesPmFloodContainerCurrBinBcastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.5.2.1.5
cienaCesPmFloodContainerCurrBinBcastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.5.2.1.6
cienaCesPmFloodContainerCurrBinL2McastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.5.2.1.7
cienaCesPmFloodContainerCurrBinL2McastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.5.2.1.8
cienaCesPmFloodContainerCurrBinUnknownUnicastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.5.2.1.9
cienaCesPmFloodContainerCurrBinUnknownUnicastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.5.2.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-14 Statistics
Object
OID
cienaCesPmFloodContainerHist24HBinBcastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.5.4.1.4
cienaCesPmFloodContainerHist24HBinBcastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.5.4.1.5
cienaCesPmFloodContainerHist24HBinL2McastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.5.4.1.6
cienaCesPmFloodContainerHist24HBinL2McastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.5.4.1.7
cienaCesPmFloodContainerHist24HBinUnknownUnicastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.5.4.1.8
cienaCesPmFloodContainerHist24HBinUnknownUnicastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.5.4.1.9
cienaCesPmFloodContainerHistoryBinBcastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.5.1.1.7
cienaCesPmFloodContainerHistoryBinBcastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.5.1.1.8
cienaCesPmFloodContainerHistoryBinL2McastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.5.1.1.9
cienaCesPmFloodContainerHistoryBinL2McastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.5.1.1.10
cienaCesPmFloodContainerHistoryBinUnknownUnicastDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.5.1.1.11
cienaCesPmFloodContainerHistoryBinUnknownUnicastDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.5.1.1.12
cienaCesPmIGMPAllTimeBinIgmpnumBadChecksum
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.13
cienaCesPmIGMPAllTimeBinIgmpnumHostDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.12
cienaCesPmIGMPAllTimeBinIgmpnumJoins
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.1
cienaCesPmIGMPAllTimeBinIgmpnumL2L3Mismatch
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.14
cienaCesPmIGMPAllTimeBinIgmpnumLeaves
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.2
cienaCesPmIGMPAllTimeBinIgmpnumQueries
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.3
cienaCesPmIGMPAllTimeBinIgmpnumQueryDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.4
cienaCesPmIGMPAllTimeBinIgmpnumQueryDiscardsLiNoServerLI
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.8
cienaCesPmIGMPAllTimeBinIgmpnumQueryDiscardsPortBlock
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.7
cienaCesPmIGMPAllTimeBinIgmpnumQueryDiscardsPortDown
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.6
cienaCesPmIGMPAllTimeBinIgmpnumQueryDiscardsQueryCameTooSoon
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.5
cienaCesPmIGMPAllTimeBinIgmpnumQueryDiscardsSrcIpZero
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.17
cienaCesPmIGMPAllTimeBinIgmpnumQueryTimeouts
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.9
cienaCesPmIGMPAllTimeBinIgmpnumReplyTimeouts
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.10
cienaCesPmIGMPAllTimeBinIgmpnumResourceExceed
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.16
cienaCesPmIGMPAllTimeBinIgmpnumRouterDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.11
cienaCesPmIGMPAllTimeBinIgmpnumUnknownPktType
1.3.6.1.4.1.1271.2.3.1.2.3.3.5.1.15
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-15
Object
OID
cienaCesPmIGMPCurr24HBinIgmpnumBadChecksum
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.18
cienaCesPmIGMPCurr24HBinIgmpnumHostDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.17
cienaCesPmIGMPCurr24HBinIgmpnumJoins
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.6
cienaCesPmIGMPCurr24HBinIgmpnumL2L3Mismatch
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.19
cienaCesPmIGMPCurr24HBinIgmpnumLeaves
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.7
cienaCesPmIGMPCurr24HBinIgmpnumQueries
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.8
cienaCesPmIGMPCurr24HBinIgmpnumQueryDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.9
cienaCesPmIGMPCurr24HBinIgmpnumQueryDiscardsLiNoServerLI
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.13
cienaCesPmIGMPCurr24HBinIgmpnumQueryDiscardsPortBlock
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.12
cienaCesPmIGMPCurr24HBinIgmpnumQueryDiscardsPortDown
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.11
cienaCesPmIGMPCurr24HBinIgmpnumQueryDiscardsQueryCameTooSoo
n
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.10
cienaCesPmIGMPCurr24HBinIgmpnumQueryDiscardsSrcIpZero
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.22
cienaCesPmIGMPCurr24HBinIgmpnumQueryTimeouts
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.14
cienaCesPmIGMPCurr24HBinIgmpnumReplyTimeouts
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.15
cienaCesPmIGMPCurr24HBinIgmpnumResourceExceed
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.21
cienaCesPmIGMPCurr24HBinIgmpnumRouterDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.16
cienaCesPmIGMPCurr24HBinIgmpnumUnknownPktType
1.3.6.1.4.1.1271.2.3.1.2.3.3.3.1.20
cienaCesPmIGMPCurrBinIgmpnumBadChecksum
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.17
cienaCesPmIGMPCurrBinIgmpnumHostDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.16
cienaCesPmIGMPCurrBinIgmpnumJoins
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.5
cienaCesPmIGMPCurrBinIgmpnumL2L3Mismatch
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.18
cienaCesPmIGMPCurrBinIgmpnumLeaves
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.6
cienaCesPmIGMPCurrBinIgmpnumQueries
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.7
cienaCesPmIGMPCurrBinIgmpnumQueryDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.8
cienaCesPmIGMPCurrBinIgmpnumQueryDiscardsLiNoServerLI
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.12
cienaCesPmIGMPCurrBinIgmpnumQueryDiscardsPortBlock
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.11
cienaCesPmIGMPCurrBinIgmpnumQueryDiscardsPortDown
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.10
cienaCesPmIGMPCurrBinIgmpnumQueryDiscardsQueryCameTooSoon
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-16 Statistics
Object
OID
cienaCesPmIGMPCurrBinIgmpnumQueryDiscardsSrcIpZero
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.21
cienaCesPmIGMPCurrBinIgmpnumQueryTimeouts
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.13
cienaCesPmIGMPCurrBinIgmpnumReplyTimeouts
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.14
cienaCesPmIGMPCurrBinIgmpnumResourceExceed
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.20
cienaCesPmIGMPCurrBinIgmpnumRouterDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.15
cienaCesPmIGMPCurrBinIgmpnumUnknownPktType
1.3.6.1.4.1.1271.2.3.1.2.3.3.2.1.19
cienaCesPmIGMPHist24HBinIgmpnumBadChecksum
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.17
cienaCesPmIGMPHist24HBinIgmpnumHostDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.16
cienaCesPmIGMPHist24HBinIgmpnumJoins
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.5
cienaCesPmIGMPHist24HBinIgmpnumL2L3Mismatch
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.18
cienaCesPmIGMPHist24HBinIgmpnumLeaves
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.6
cienaCesPmIGMPHist24HBinIgmpnumQueries
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.7
cienaCesPmIGMPHist24HBinIgmpnumQueryDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.8
cienaCesPmIGMPHist24HBinIgmpnumQueryDiscardsLiNoServerLI
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.12
cienaCesPmIGMPHist24HBinIgmpnumQueryDiscardsPortBlock
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.11
cienaCesPmIGMPHist24HBinIgmpnumQueryDiscardsPortDown
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.10
cienaCesPmIGMPHist24HBinIgmpnumQueryDiscardsQueryCameTooSoon 1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.9
cienaCesPmIGMPHist24HBinIgmpnumQueryDiscardsSrcIpZero
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.21
cienaCesPmIGMPHist24HBinIgmpnumQueryTimeouts
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.13
cienaCesPmIGMPHist24HBinIgmpnumReplyTimeouts
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.14
cienaCesPmIGMPHist24HBinIgmpnumResourceExceed
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.20
cienaCesPmIGMPHist24HBinIgmpnumRouterDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.15
cienaCesPmIGMPHist24HBinIgmpnumUnknownPktType
1.3.6.1.4.1.1271.2.3.1.2.3.3.4.1.19
cienaCesPmIGMPHistoryBinIgmpnumBadChecksum
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.19
cienaCesPmIGMPHistoryBinIgmpnumHostDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.18
cienaCesPmIGMPHistoryBinIgmpnumJoins
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.7
cienaCesPmIGMPHistoryBinIgmpnumL2L3Mismatch
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.20
cienaCesPmIGMPHistoryBinIgmpnumLeaves
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.8
cienaCesPmIGMPHistoryBinIgmpnumQueries
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-17
Object
OID
cienaCesPmIGMPHistoryBinIgmpnumQueryDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.10
cienaCesPmIGMPHistoryBinIgmpnumQueryDiscardsLiNoServerLI
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.14
cienaCesPmIGMPHistoryBinIgmpnumQueryDiscardsPortBlock
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.13
cienaCesPmIGMPHistoryBinIgmpnumQueryDiscardsPortDown
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.12
cienaCesPmIGMPHistoryBinIgmpnumQueryDiscardsQueryCameTooSoon
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.11
cienaCesPmIGMPHistoryBinIgmpnumQueryDiscardsSrcIpZero
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.23
cienaCesPmIGMPHistoryBinIgmpnumQueryTimeouts
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.15
cienaCesPmIGMPHistoryBinIgmpnumReplyTimeouts
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.16
cienaCesPmIGMPHistoryBinIgmpnumResourceExceed
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.22
cienaCesPmIGMPHistoryBinIgmpnumRouterDiscards
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.17
cienaCesPmIGMPHistoryBinIgmpnumUnknownPktType
1.3.6.1.4.1.1271.2.3.1.2.3.3.1.1.21
cienaCesPmQueueGroupAllTimeBinDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.8.5.1.3
cienaCesPmQueueGroupAllTimeBinDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.8.5.1.4
cienaCesPmQueueGroupAllTimeBinEnqueuedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.8.5.1.1
cienaCesPmQueueGroupAllTimeBinEnqueuedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.8.5.1.2
cienaCesPmQueueGroupCurr24HBinDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.8.3.1.8
cienaCesPmQueueGroupCurr24HBinDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.8.3.1.9
cienaCesPmQueueGroupCurr24HBinEnqueuedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.8.3.1.6
cienaCesPmQueueGroupCurr24HBinEnqueuedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.8.3.1.7
cienaCesPmQueueGroupCurrBinDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.8.2.1.7
cienaCesPmQueueGroupCurrBinDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.8.2.1.8
cienaCesPmQueueGroupCurrBinEnqueuedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.8.2.1.5
cienaCesPmQueueGroupCurrBinEnqueuedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.8.2.1.6
cienaCesPmQueueGroupHist24HBinDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.8.4.1.6
cienaCesPmQueueGroupHist24HBinDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.8.4.1.7
cienaCesPmQueueGroupHist24HBinEnqueuedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.8.4.1.4
cienaCesPmQueueGroupHist24HBinEnqueuedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.8.4.1.5
cienaCesPmQueueGroupHistoryBinDroppedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.8.1.1.10
cienaCesPmQueueGroupHistoryBinDroppedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.8.1.1.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-18 Statistics
Object
OID
cienaCesPmQueueGroupHistoryBinEnqueuedBytes
1.3.6.1.4.1.1271.2.3.1.2.3.8.1.1.8
cienaCesPmQueueGroupHistoryBinEnqueuedFrames
1.3.6.1.4.1.1271.2.3.1.2.3.8.1.1.9
cienaCesPmTdmE1PortCurr24HBinAs
1.3.6.1.4.1.1271.2.3.1.2.3.10.3.1.10
cienaCesPmTdmE1PortCurr24HBinBbe
1.3.6.1.4.1.1271.2.3.1.2.3.10.3.1.6
cienaCesPmTdmE1PortCurr24HBinEb
1.3.6.1.4.1.1271.2.3.1.2.3.10.3.1.5
cienaCesPmTdmE1PortCurr24HBinEs
1.3.6.1.4.1.1271.2.3.1.2.3.10.3.1.7
cienaCesPmTdmE1PortCurr24HBinSes
1.3.6.1.4.1.1271.2.3.1.2.3.10.3.1.8
cienaCesPmTdmE1PortCurr24HBinTt
1.3.6.1.4.1.1271.2.3.1.2.3.10.3.1.11
cienaCesPmTdmE1PortCurr24HBinUas
1.3.6.1.4.1.1271.2.3.1.2.3.10.3.1.9
cienaCesPmTdmE1PortCurrBinAs
1.3.6.1.4.1.1271.2.3.1.2.3.10.2.1.10
cienaCesPmTdmE1PortCurrBinBbe
1.3.6.1.4.1.1271.2.3.1.2.3.10.2.1.6
cienaCesPmTdmE1PortCurrBinEb
1.3.6.1.4.1.1271.2.3.1.2.3.10.2.1.5
cienaCesPmTdmE1PortCurrBinEs
1.3.6.1.4.1.1271.2.3.1.2.3.10.2.1.7
cienaCesPmTdmE1PortCurrBinSes
1.3.6.1.4.1.1271.2.3.1.2.3.10.2.1.8
cienaCesPmTdmE1PortCurrBinTt
1.3.6.1.4.1.1271.2.3.1.2.3.10.2.1.11
cienaCesPmTdmE1PortCurrBinUas
1.3.6.1.4.1.1271.2.3.1.2.3.10.2.1.9
cienaCesPmTdmE1PortHist24HBinAs
1.3.6.1.4.1.1271.2.3.1.2.3.10.4.1.11
cienaCesPmTdmE1PortHist24HBinBbe
1.3.6.1.4.1.1271.2.3.1.2.3.10.4.1.7
cienaCesPmTdmE1PortHist24HBinEb
1.3.6.1.4.1.1271.2.3.1.2.3.10.4.1.6
cienaCesPmTdmE1PortHist24HBinEs
1.3.6.1.4.1.1271.2.3.1.2.3.10.4.1.8
cienaCesPmTdmE1PortHist24HBinSes
1.3.6.1.4.1.1271.2.3.1.2.3.10.4.1.9
cienaCesPmTdmE1PortHist24HBinTt
1.3.6.1.4.1.1271.2.3.1.2.3.10.4.1.12
cienaCesPmTdmE1PortHist24HBinUas
1.3.6.1.4.1.1271.2.3.1.2.3.10.4.1.10
cienaCesPmTdmE1PortHistoryBinAs
1.3.6.1.4.1.1271.2.3.1.2.3.10.1.1.12
cienaCesPmTdmE1PortHistoryBinBbe
1.3.6.1.4.1.1271.2.3.1.2.3.10.1.1.8
cienaCesPmTdmE1PortHistoryBinEb
1.3.6.1.4.1.1271.2.3.1.2.3.10.1.1.7
cienaCesPmTdmE1PortHistoryBinEs
1.3.6.1.4.1.1271.2.3.1.2.3.10.1.1.9
cienaCesPmTdmE1PortHistoryBinSes
1.3.6.1.4.1.1271.2.3.1.2.3.10.1.1.10
cienaCesPmTdmE1PortHistoryBinTt
1.3.6.1.4.1.1271.2.3.1.2.3.10.1.1.13
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-19
Object
OID
cienaCesPmTdmE1PortHistoryBinUas
1.3.6.1.4.1.1271.2.3.1.2.3.10.1.1.11
cienaCesPmTdmE1PortStatisticsBinAs
1.3.6.1.4.1.1271.2.3.1.2.3.10.5.1.8
cienaCesPmTdmE1PortStatisticsBinBbe
1.3.6.1.4.1.1271.2.3.1.2.3.10.5.1.4
cienaCesPmTdmE1PortStatisticsBinEb
1.3.6.1.4.1.1271.2.3.1.2.3.10.5.1.3
cienaCesPmTdmE1PortStatisticsBinEs
1.3.6.1.4.1.1271.2.3.1.2.3.10.5.1.5
cienaCesPmTdmE1PortStatisticsBinSes
1.3.6.1.4.1.1271.2.3.1.2.3.10.5.1.6
cienaCesPmTdmE1PortStatisticsBinTt
1.3.6.1.4.1.1271.2.3.1.2.3.10.5.1.9
cienaCesPmTdmE1PortStatisticsBinUas
1.3.6.1.4.1.1271.2.3.1.2.3.10.5.1.7
cienaCesPmTdmE1PortTotalStatisticsBinAs
1.3.6.1.4.1.1271.2.3.1.2.3.10.6.1.7
cienaCesPmTdmE1PortTotalStatisticsBinBbe
1.3.6.1.4.1.1271.2.3.1.2.3.10.6.1.3
cienaCesPmTdmE1PortTotalStatisticsBinEb
1.3.6.1.4.1.1271.2.3.1.2.3.10.6.1.2
cienaCesPmTdmE1PortTotalStatisticsBinEs
1.3.6.1.4.1.1271.2.3.1.2.3.10.6.1.4
cienaCesPmTdmE1PortTotalStatisticsBinSes
1.3.6.1.4.1.1271.2.3.1.2.3.10.6.1.5
cienaCesPmTdmE1PortTotalStatisticsBinTt
1.3.6.1.4.1.1271.2.3.1.2.3.10.6.1.8
cienaCesPmTdmE1PortTotalStatisticsBinUas
1.3.6.1.4.1.1271.2.3.1.2.3.10.6.1.6
cienaCesPmTdmPwCurr24HBinEs
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.11
cienaCesPmTdmPwCurr24HBinLbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.15
cienaCesPmTdmPwCurr24HBinLops
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.14
cienaCesPmTdmPwCurr24HBinMalformed
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.8
cienaCesPmTdmPwCurr24HBinMbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.17
cienaCesPmTdmPwCurr24HBinMiss
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.5
cienaCesPmTdmPwCurr24HBinMissorder
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.7
cienaCesPmTdmPwCurr24HBinOverrun
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.10
cienaCesPmTdmPwCurr24HBinRbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.16
cienaCesPmTdmPwCurr24HBinReorder
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.6
cienaCesPmTdmPwCurr24HBinRxPkt
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.18
cienaCesPmTdmPwCurr24HBinSes
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.12
cienaCesPmTdmPwCurr24HBinTxPkt
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.19
cienaCesPmTdmPwCurr24HBinUas
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.13
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-20 Statistics
Object
OID
cienaCesPmTdmPwCurr24HBinUnderrun
1.3.6.1.4.1.1271.2.3.1.2.3.11.3.1.9
cienaCesPmTdmPwCurrBinEs
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.11
cienaCesPmTdmPwCurrBinLbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.15
cienaCesPmTdmPwCurrBinLops
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.14
cienaCesPmTdmPwCurrBinMalformed
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.8
cienaCesPmTdmPwCurrBinMbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.17
cienaCesPmTdmPwCurrBinMiss
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.5
cienaCesPmTdmPwCurrBinMissorder
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.7
cienaCesPmTdmPwCurrBinOverrun
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.10
cienaCesPmTdmPwCurrBinRbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.16
cienaCesPmTdmPwCurrBinReorder
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.6
cienaCesPmTdmPwCurrBinRxPkt
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.18
cienaCesPmTdmPwCurrBinSes
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.12
cienaCesPmTdmPwCurrBinTxPkt
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.19
cienaCesPmTdmPwCurrBinUas
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.13
cienaCesPmTdmPwCurrBinUnderrun
1.3.6.1.4.1.1271.2.3.1.2.3.11.2.1.9
cienaCesPmTdmPwHist24HBinEs
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.12
cienaCesPmTdmPwHist24HBinLbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.16
cienaCesPmTdmPwHist24HBinLops
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.15
cienaCesPmTdmPwHist24HBinMalformed
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.9
cienaCesPmTdmPwHist24HBinMbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.18
cienaCesPmTdmPwHist24HBinMiss
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.6
cienaCesPmTdmPwHist24HBinMissorder
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.8
cienaCesPmTdmPwHist24HBinOverrun
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.11
cienaCesPmTdmPwHist24HBinRbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.17
cienaCesPmTdmPwHist24HBinReorder
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.7
cienaCesPmTdmPwHist24HBinRxPkt
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.19
cienaCesPmTdmPwHist24HBinSes
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.13
cienaCesPmTdmPwHist24HBinTxPkt
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.20
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-21
Object
OID
cienaCesPmTdmPwHist24HBinUas
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.14
cienaCesPmTdmPwHist24HBinUnderrun
1.3.6.1.4.1.1271.2.3.1.2.3.11.4.1.10
cienaCesPmTdmPwHistoryBinEs
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.13
cienaCesPmTdmPwHistoryBinLbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.17
cienaCesPmTdmPwHistoryBinLops
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.16
cienaCesPmTdmPwHistoryBinMalformed
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.10
cienaCesPmTdmPwHistoryBinMbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.19
cienaCesPmTdmPwHistoryBinMiss
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.7
cienaCesPmTdmPwHistoryBinMissorder
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.9
cienaCesPmTdmPwHistoryBinOverrun
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.12
cienaCesPmTdmPwHistoryBinRbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.18
cienaCesPmTdmPwHistoryBinReorder
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.8
cienaCesPmTdmPwHistoryBinRxPkt
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.20
cienaCesPmTdmPwHistoryBinSes
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.14
cienaCesPmTdmPwHistoryBinTxPkt
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.21
cienaCesPmTdmPwHistoryBinUas
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.15
cienaCesPmTdmPwHistoryBinUnderrun
1.3.6.1.4.1.1271.2.3.1.2.3.11.1.1.11
cienaCesPmTdmPwStatisticsBinEs
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.9
cienaCesPmTdmPwStatisticsBinLbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.13
cienaCesPmTdmPwStatisticsBinLops
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.12
cienaCesPmTdmPwStatisticsBinMalformed
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.6
cienaCesPmTdmPwStatisticsBinMbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.15
cienaCesPmTdmPwStatisticsBinMiss
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.3
cienaCesPmTdmPwStatisticsBinMissorder
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.5
cienaCesPmTdmPwStatisticsBinOverrun
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.8
cienaCesPmTdmPwStatisticsBinRbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.14
cienaCesPmTdmPwStatisticsBinReorder
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.4
cienaCesPmTdmPwStatisticsBinRxPkt
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.16
cienaCesPmTdmPwStatisticsBinSes
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.10
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-22 Statistics
Object
OID
cienaCesPmTdmPwStatisticsBinTxPkt
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.17
cienaCesPmTdmPwStatisticsBinUas
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.11
cienaCesPmTdmPwStatisticsBinUnderrun
1.3.6.1.4.1.1271.2.3.1.2.3.11.5.1.7
cienaCesPmTdmPwTotalStatisticsBinEs
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.8
cienaCesPmTdmPwTotalStatisticsBinLbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.12
cienaCesPmTdmPwTotalStatisticsBinLops
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.11
cienaCesPmTdmPwTotalStatisticsBinMalformed
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.5
cienaCesPmTdmPwTotalStatisticsBinMbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.14
cienaCesPmTdmPwTotalStatisticsBinMiss
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.2
cienaCesPmTdmPwTotalStatisticsBinMissorder
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.4
cienaCesPmTdmPwTotalStatisticsBinOverrun
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.7
cienaCesPmTdmPwTotalStatisticsBinRbit
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.13
cienaCesPmTdmPwTotalStatisticsBinReorder
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.3
cienaCesPmTdmPwTotalStatisticsBinRxPkt
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.15
cienaCesPmTdmPwTotalStatisticsBinSes
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.9
cienaCesPmTdmPwTotalStatisticsBinTxPkt
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.16
cienaCesPmTdmPwTotalStatisticsBinUas
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.10
cienaCesPmTdmPwTotalStatisticsBinUnderrun
1.3.6.1.4.1.1271.2.3.1.2.3.11.6.1.6
cienaCesPmTdmT1PortCurr24HBinAsp
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.15
cienaCesPmTdmT1PortCurr24HBinCvl
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.5
cienaCesPmTdmT1PortCurr24HBinCvp
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.9
cienaCesPmTdmT1PortCurr24HBinEsl
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.6
cienaCesPmTdmT1PortCurr24HBinEsp
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.10
cienaCesPmTdmT1PortCurr24HBinFcp
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.14
cienaCesPmTdmT1PortCurr24HBinLossl
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.8
cienaCesPmTdmT1PortCurr24HBinSasp
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.13
cienaCesPmTdmT1PortCurr24HBinSesl
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.7
cienaCesPmTdmT1PortCurr24HBinSesp
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.11
cienaCesPmTdmT1PortCurr24HBinTtp
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.16
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-23
Object
OID
cienaCesPmTdmT1PortCurr24HBinUasp
1.3.6.1.4.1.1271.2.3.1.2.3.9.3.1.12
cienaCesPmTdmT1PortCurrBinAsp
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.15
cienaCesPmTdmT1PortCurrBinCvl
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.5
cienaCesPmTdmT1PortCurrBinCvp
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.9
cienaCesPmTdmT1PortCurrBinEsl
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.6
cienaCesPmTdmT1PortCurrBinEsp
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.10
cienaCesPmTdmT1PortCurrBinFcp
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.14
cienaCesPmTdmT1PortCurrBinLossl
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.8
cienaCesPmTdmT1PortCurrBinSasp
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.13
cienaCesPmTdmT1PortCurrBinSesl
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.7
cienaCesPmTdmT1PortCurrBinSesp
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.11
cienaCesPmTdmT1PortCurrBinTtp
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.16
cienaCesPmTdmT1PortCurrBinUasp
1.3.6.1.4.1.1271.2.3.1.2.3.9.2.1.12
cienaCesPmTdmT1PortHist24HBinAsp
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.16
cienaCesPmTdmT1PortHist24HBinCvl
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.6
cienaCesPmTdmT1PortHist24HBinCvp
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.10
cienaCesPmTdmT1PortHist24HBinEsl
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.7
cienaCesPmTdmT1PortHist24HBinEsp
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.11
cienaCesPmTdmT1PortHist24HBinFcp
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.15
cienaCesPmTdmT1PortHist24HBinLossl
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.9
cienaCesPmTdmT1PortHist24HBinSasp
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.14
cienaCesPmTdmT1PortHist24HBinSesl
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.8
cienaCesPmTdmT1PortHist24HBinSesp
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.12
cienaCesPmTdmT1PortHist24HBinTtp
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.17
cienaCesPmTdmT1PortHist24HBinUasp
1.3.6.1.4.1.1271.2.3.1.2.3.9.4.1.13
cienaCesPmTdmT1PortHistoryBinAsp
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.17
cienaCesPmTdmT1PortHistoryBinCvl
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.7
cienaCesPmTdmT1PortHistoryBinCvp
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.11
cienaCesPmTdmT1PortHistoryBinEsl
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-24 Statistics
Object
OID
cienaCesPmTdmT1PortHistoryBinEsp
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.12
cienaCesPmTdmT1PortHistoryBinFcp
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.16
cienaCesPmTdmT1PortHistoryBinLossl
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.10
cienaCesPmTdmT1PortHistoryBinSasp
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.15
cienaCesPmTdmT1PortHistoryBinSesl
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.9
cienaCesPmTdmT1PortHistoryBinSesp
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.13
cienaCesPmTdmT1PortHistoryBinTtp
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.18
cienaCesPmTdmT1PortHistoryBinUasp
1.3.6.1.4.1.1271.2.3.1.2.3.9.1.1.14
cienaCesPmTdmT1PortStatisticsBinAsp
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.13
cienaCesPmTdmT1PortStatisticsBinCvl
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.3
cienaCesPmTdmT1PortStatisticsBinCvp
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.7
cienaCesPmTdmT1PortStatisticsBinEsl
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.4
cienaCesPmTdmT1PortStatisticsBinEsp
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.8
cienaCesPmTdmT1PortStatisticsBinFcp
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.12
cienaCesPmTdmT1PortStatisticsBinLossl
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.6
cienaCesPmTdmT1PortStatisticsBinSasp
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.11
cienaCesPmTdmT1PortStatisticsBinSesl
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.5
cienaCesPmTdmT1PortStatisticsBinSesp
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.9
cienaCesPmTdmT1PortStatisticsBinTtp
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.14
cienaCesPmTdmT1PortStatisticsBinUasp
1.3.6.1.4.1.1271.2.3.1.2.3.9.5.1.10
cienaCesPmTdmT1PortTotalStatisticsBinAsp
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1.12
cienaCesPmTdmT1PortTotalStatisticsBinCvl
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1.2
cienaCesPmTdmT1PortTotalStatisticsBinCvp
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1.6
cienaCesPmTdmT1PortTotalStatisticsBinEsl
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1.3
cienaCesPmTdmT1PortTotalStatisticsBinEsp
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1.7
cienaCesPmTdmT1PortTotalStatisticsBinFcp
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1.11
cienaCesPmTdmT1PortTotalStatisticsBinLossl
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1.5
cienaCesPmTdmT1PortTotalStatisticsBinSasp
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1.10
cienaCesPmTdmT1PortTotalStatisticsBinSesl
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-25
Object
OID
cienaCesPmTdmT1PortTotalStatisticsBinSesp
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1.8
cienaCesPmTdmT1PortTotalStatisticsBinTtp
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1.13
cienaCesPmTdmT1PortTotalStatisticsBinUasp
1.3.6.1.4.1.1271.2.3.1.2.3.9.6.1.9
dot1dBasePortDelayExceededDiscards
1.3.6.1.2.1.17.1.4.1.4
dot1dBasePortMtuExceededDiscards
1.3.6.1.2.1.17.1.4.1.5
dot1dStpPortForwardTransitions
1.3.6.1.2.1.17.2.15.1.10
dot1dStpTopChanges
1.3.6.1.2.1.17.2.4
dot1dTpLearnedEntryDiscards
1.3.6.1.2.1.17.4.1
dot1dTpPortInDiscards
1.3.6.1.2.1.17.4.4.1.5
dot1dTpPortInFrames
1.3.6.1.2.1.17.4.4.1.3
dot1dTpPortOutFrames
1.3.6.1.2.1.17.4.4.1.4
wwpLeosBenchmarkFpgaStatsCrcPkts
1.3.6.1.4.1.6141.2.60.43.1.4.2
wwpLeosBenchmarkFpgaStatsDiscardPkts
1.3.6.1.4.1.6141.2.60.43.1.4.4
wwpLeosBenchmarkFpgaStatsDiscSeqNumPkts
1.3.6.1.4.1.6141.2.60.43.1.4.9
wwpLeosBenchmarkFpgaStatsDuplicatePkts
1.3.6.1.4.1.6141.2.60.43.1.4.5
wwpLeosBenchmarkFpgaStatsOOOPkts
1.3.6.1.4.1.6141.2.60.43.1.4.8
wwpLeosBenchmarkFpgaStatsOOSeqPkts
1.3.6.1.4.1.6141.2.60.43.1.4.6
wwpLeosBenchmarkFpgaStatsRxIpPkts
1.3.6.1.4.1.6141.2.60.43.1.4.10
wwpLeosBenchmarkFpgaStatsRxNonIpPkts
1.3.6.1.4.1.6141.2.60.43.1.4.12
wwpLeosBenchmarkFpgaStatsRxPkts
1.3.6.1.4.1.6141.2.60.43.1.4.1
wwpLeosBenchmarkFpgaStatsRxUdpPkts
1.3.6.1.4.1.6141.2.60.43.1.4.11
wwpLeosBenchmarkFpgaStatsRxUnrecognizedPkts
1.3.6.1.4.1.6141.2.60.43.1.4.13
wwpLeosBenchmarkFpgaStatsTxPkts
1.3.6.1.4.1.6141.2.60.43.1.4.7
wwpLeosBenchmarkFpgaStatsUdpChecksumPkts
1.3.6.1.4.1.6141.2.60.43.1.4.3
wwpLeosBenchmarkPortStatsBcastPkts
1.3.6.1.4.1.6141.2.60.43.1.5.6
wwpLeosBenchmarkPortStatsCrcErrorPkts
1.3.6.1.4.1.6141.2.60.43.1.5.3
wwpLeosBenchmarkPortStatsFragmentsPkts
1.3.6.1.4.1.6141.2.60.43.1.5.9
wwpLeosBenchmarkPortStatsJabbersPkts
1.3.6.1.4.1.6141.2.60.43.1.5.10
wwpLeosBenchmarkPortStatsMcastPkts
1.3.6.1.4.1.6141.2.60.43.1.5.5
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-26 Statistics
Object
OID
wwpLeosBenchmarkPortStatsOversizePkts
1.3.6.1.4.1.6141.2.60.43.1.5.8
wwpLeosBenchmarkPortStatsRx1024To1518Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.42
wwpLeosBenchmarkPortStatsRx128To255Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.39
wwpLeosBenchmarkPortStatsRx1519To2047Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.43
wwpLeosBenchmarkPortStatsRx2048To4095Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.44
wwpLeosBenchmarkPortStatsRx256To511Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.40
wwpLeosBenchmarkPortStatsRx4096To9216Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.45
wwpLeosBenchmarkPortStatsRx512To1023Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.41
wwpLeosBenchmarkPortStatsRx64Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.37
wwpLeosBenchmarkPortStatsRx65To127Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.38
wwpLeosBenchmarkPortStatsRxBcastPkts
1.3.6.1.4.1.6141.2.60.43.1.5.36
wwpLeosBenchmarkPortStatsRxBytes
1.3.6.1.4.1.6141.2.60.43.1.5.24
wwpLeosBenchmarkPortStatsRxCrcErrorPkts
1.3.6.1.4.1.6141.2.60.43.1.5.30
wwpLeosBenchmarkPortStatsRxDeferPkts
1.3.6.1.4.1.6141.2.60.43.1.5.27
wwpLeosBenchmarkPortStatsRxExDeferPkts
1.3.6.1.4.1.6141.2.60.43.1.5.26
wwpLeosBenchmarkPortStatsRxGiantPkts
1.3.6.1.4.1.6141.2.60.43.1.5.28
wwpLeosBenchmarkPortStatsRxLCheckErrorPkts
1.3.6.1.4.1.6141.2.60.43.1.5.31
wwpLeosBenchmarkPortStatsRxLOutRangePkts
1.3.6.1.4.1.6141.2.60.43.1.5.32
wwpLeosBenchmarkPortStatsRxMcastPkts
1.3.6.1.4.1.6141.2.60.43.1.5.35
wwpLeosBenchmarkPortStatsRxPausePkts
1.3.6.1.4.1.6141.2.60.43.1.5.33
wwpLeosBenchmarkPortStatsRxPkts
1.3.6.1.4.1.6141.2.60.43.1.5.25
wwpLeosBenchmarkPortStatsRxUcastPkts
1.3.6.1.4.1.6141.2.60.43.1.5.34
wwpLeosBenchmarkPortStatsRxUnderRunPkts
1.3.6.1.4.1.6141.2.60.43.1.5.29
wwpLeosBenchmarkPortStatsTx1024To1518Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.20
wwpLeosBenchmarkPortStatsTx128To255Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.17
wwpLeosBenchmarkPortStatsTx1519To2047Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.21
wwpLeosBenchmarkPortStatsTx2048To4095Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.22
wwpLeosBenchmarkPortStatsTx256To511Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.18
wwpLeosBenchmarkPortStatsTx4096To9216Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.23
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-27
Object
OID
wwpLeosBenchmarkPortStatsTx512To1023Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.19
wwpLeosBenchmarkPortStatsTx64OctsPkts
1.3.6.1.4.1.6141.2.60.43.1.5.15
wwpLeosBenchmarkPortStatsTx65To127Pkts
1.3.6.1.4.1.6141.2.60.43.1.5.16
wwpLeosBenchmarkPortStatsTxBytes
1.3.6.1.4.1.6141.2.60.43.1.5.1
wwpLeosBenchmarkPortStatsTxDiscardPkts
1.3.6.1.4.1.6141.2.60.43.1.5.13
wwpLeosBenchmarkPortStatsTxDropPkts
1.3.6.1.4.1.6141.2.60.43.1.5.12
wwpLeosBenchmarkPortStatsTxLOutRangePkts
1.3.6.1.4.1.6141.2.60.43.1.5.14
wwpLeosBenchmarkPortStatsTxPausePkts
1.3.6.1.4.1.6141.2.60.43.1.5.11
wwpLeosBenchmarkPortStatsTxPkts
1.3.6.1.4.1.6141.2.60.43.1.5.2
wwpLeosBenchmarkPortStatsUcastPkts
1.3.6.1.4.1.6141.2.60.43.1.5.4
wwpLeosBenchmarkPortStatsUndersizePkts
1.3.6.1.4.1.6141.2.60.43.1.5.7
wwpLeosBroadcastContainmentBytesDroppedStats
1.3.6.1.4.1.6141.2.60.8.1.10
wwpLeosBroadcastContainmentPktDroppedStats
1.3.6.1.4.1.6141.2.60.8.1.2
wwpLeosCfmCcmAvailable
1.3.6.1.4.1.6141.2.60.35.1.1.4
wwpLeosCfmExtMEPBlockOppositeFaultCurrent
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.60
wwpLeosCfmExtMEPDMMDelay
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.14
wwpLeosCfmExtMEPDMMJitter
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.15
wwpLeosCfmExtMEPDMMMaxDelay
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.64
wwpLeosCfmExtMEPDMMMaxJitter
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.66
wwpLeosCfmExtMEPDMMMinDelay
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.63
wwpLeosCfmExtMEPDMMMinJitter
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.65
wwpLeosCfmExtMEPLastStatsDMMDelay
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.10
wwpLeosCfmExtMEPLastStatsDMMJitter
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.11
wwpLeosCfmExtMEPLastStatsDMMMaxDelay
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.22
wwpLeosCfmExtMEPLastStatsDMMMaxJitter
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.24
wwpLeosCfmExtMEPLastStatsDMMMinDelay
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.21
wwpLeosCfmExtMEPLastStatsDMMMinJitter
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.23
wwpLeosCfmExtMEPLastStatsDMMPriority
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.7
wwpLeosCfmExtMEPLastStatsDMMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-28 Statistics
Object
OID
wwpLeosCfmExtMEPLastStatsDMMTxmt
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.8
wwpLeosCfmExtMEPLastStatsFrameLossBadSequence
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.20
wwpLeosCfmExtMEPLastStatsFrameLossFar
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.16
wwpLeosCfmExtMEPLastStatsFrameLossNear
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.15
wwpLeosCfmExtMEPLastStatsInOrderLBRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.5
wwpLeosCfmExtMEPLastStatsLBMCount
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.2
wwpLeosCfmExtMEPLastStatsLBMSent
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.3
wwpLeosCfmExtMEPLastStatsLBMToSend
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.4
wwpLeosCfmExtMEPLastStatsLMMPriority
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.12
wwpLeosCfmExtMEPLastStatsLMMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.14
wwpLeosCfmExtMEPLastStatsLMMTxtm
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.13
wwpLeosCfmExtMEPLastStatsLTMInitialTTL
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.19
wwpLeosCfmExtMEPLastStatsLTMPriority
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.17
wwpLeosCfmExtMEPLastStatsLTMSequenceNo
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.18
wwpLeosCfmExtMEPLastStatsOutOfOrderLBRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.6
wwpLeosCfmExtMEPLastStatsPriority
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.1
wwpLeosCfmExtMEPLMMBadSequence
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.57
wwpLeosCfmExtMEPLMMFrameLossFar
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.17
wwpLeosCfmExtMEPLMMFrameLossNear
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.16
wwpLeosCfmExtMEPLMMMissingSequence
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.59
wwpLeosCfmExtMEPNextLbmSeqNumber
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.11
wwpLeosCfmExtMEPNextLTMSeqNumber
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.12
wwpLeosCfmExtMEPSLMFrameLossFar
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.69
wwpLeosCfmExtMEPSLMFrameLossNear
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.68
wwpLeosCfmExtMEPStatsCCMInSequenceReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.9
wwpLeosCfmExtMEPStatsCCMSequenceErrorsReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.10
wwpLeosCfmExtMEPStatsCCMTxmt
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.7
wwpLeosCfmExtMEPStatsContentMismatchLBRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.19
wwpLeosCfmExtMEPStatsDMMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.29
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-29
Object
OID
wwpLeosCfmExtMEPStatsDMMTxmt
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.28
wwpLeosCfmExtMEPStatsDMReplyTimeout
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.32
wwpLeosCfmExtMEPStatsDMRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.31
wwpLeosCfmExtMEPStatsDMRTxmt
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.30
wwpLeosCfmExtMEPStatsInOrderLBRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.17
wwpLeosCfmExtMEPStatsIntervalErrorCCMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.13
wwpLeosCfmExtMEPStatsInvalidBlockedOppositeMep
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.49
wwpLeosCfmExtMEPStatsInvalidDMMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.44
wwpLeosCfmExtMEPStatsInvalidDMRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.45
wwpLeosCfmExtMEPStatsInvalidInterfaceStatusTLVReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.5
wwpLeosCfmExtMEPStatsInvalidLBMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.42
wwpLeosCfmExtMEPStatsInvalidLBRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.21
wwpLeosCfmExtMEPStatsInvalidLMMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.47
wwpLeosCfmExtMEPStatsInvalidLMRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.48
wwpLeosCfmExtMEPStatsInvalidLTRAction
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.25
wwpLeosCfmExtMEPStatsInvalidPortStatusTLVReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.4
wwpLeosCfmExtMEPStatsInvalidSenderIDTLVReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.6
wwpLeosCfmExtMEPStatsLBMTxmt
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.15
wwpLeosCfmExtMEPStatsLBRTxmt
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.16
wwpLeosCfmExtMEPStatsLMMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.34
wwpLeosCfmExtMEPStatsLMMTxmt
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.33
wwpLeosCfmExtMEPStatsLMRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.36
wwpLeosCfmExtMEPStatsLMRTimeout
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.37
wwpLeosCfmExtMEPStatsLMRTxmt
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.35
wwpLeosCfmExtMEPStatsLTMTxmt
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.22
wwpLeosCfmExtMEPStatsLTRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.27
wwpLeosCfmExtMEPStatsLTRTxmt
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.26
wwpLeosCfmExtMEPStatsMAIDXconCCMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.12
wwpLeosCfmExtMEPStatsMDLevelXconCCMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.11
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-30 Statistics
Object
OID
wwpLeosCfmExtMEPStatsMepIdErrorCCMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.38
wwpLeosCfmExtMEPStatsOutOfOrderLBRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.18
wwpLeosCfmExtMEPStatsRxInvalidCCM
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.14
wwpLeosCfmExtMEPStatsSLMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.51
wwpLeosCfmExtMEPStatsSLMTxmt
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.50
wwpLeosCfmExtMEPStatsSLRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.53
wwpLeosCfmExtMEPStatsSLRTimeout
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.54
wwpLeosCfmExtMEPStatsSLRTxmt
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.52
wwpLeosCfmExtMEPStatsTotalInvalidFramesReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.2
wwpLeosCfmExtMEPStatsTotalInvalidLTMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.24
wwpLeosCfmExtMEPStatsTotalInvalidMessageOverflowReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.3
wwpLeosCfmExtMEPStatsTotalValidFramesReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.1
wwpLeosCfmExtMEPStatsUnexpectedDMRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.46
wwpLeosCfmExtMEPStatsUnexpectedLBRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.20
wwpLeosCfmExtMEPStatsUnexpectedLTRReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.43
wwpLeosCfmExtMEPStatsValidCCMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.8
wwpLeosCfmExtMEPStatsValidLBMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.41
wwpLeosCfmExtMEPStatsValidLTMReceived
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.23
wwpLeosCfmGlobalControlModuleFrameBudget
1.3.6.1.4.1.6141.2.60.35.1.1.24.1
wwpLeosCfmGlobalFrameBudgetValue
1.3.6.1.4.1.6141.2.60.35.1.1.24.2.1.2
wwpLeosCfmInvalidLTRRelayAction
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.7
wwpLeosCfmMEPDMMDelay
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.20
wwpLeosCfmMEPDMMJitter
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.21
wwpLeosCfmMEPDMMMaxDelay
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.28
wwpLeosCfmMEPDMMMaxJitter
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.30
wwpLeosCfmMEPDMMMinDelay
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.27
wwpLeosCfmMEPDMMMinJitter
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.29
wwpLeosCfmMEPLMMFrameLossFar
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.24
wwpLeosCfmMEPLMMFrameLossNear
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.23
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-31
Object
OID
wwpLeosCfmMEPNextLbmSeqNumber
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.10
wwpLeosCfmMEPNextLTMSeqNumber
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.13
wwpLeosCfmMEPNumCCMReceived
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.67
wwpLeosCfmMEPNumCCMTxmt
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.17
wwpLeosCfmMEPNumDMMSent
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.19
wwpLeosCfmMEPNumDMRReceived
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.26
wwpLeosCfmMEPNumLbmReceived
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.62
wwpLeosCfmMEPNumLbmTxmt
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.61
wwpLeosCfmMEPNumLMMSent
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.22
wwpLeosCfmMEPNumLMRReceived
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.25
wwpLeosCfmMEPNumLoopbackRepliesReceived
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.63
wwpLeosCfmMEPNumLoopbackRepliesTxmt
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.14
wwpLeosCfmMEPNumLTMReceived
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.15
wwpLeosCfmMEPNumLTMTxmt
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.16
wwpLeosCfmMEPNumLTRepliesReceived
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.65
wwpLeosCfmMEPNumLTRepliesTxmt
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.64
wwpLeosCfmMEPNumUnexpectedLTRepliesReceived
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.66
wwpLeosCfmMEPRxValidInOrderLoopbackReply
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.11
wwpLeosCfmMEPRxValidOutOrderLoopbackReply
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.12
wwpLeosCfmMipCCMdbNumCCMRx
1.3.6.1.4.1.6141.2.60.35.1.10.1.1.6
wwpLeosCfmRemoteMEPBadSequence
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.23
wwpLeosCfmRemoteMEPDelay
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.12
wwpLeosCfmRemoteMEPFrameLossFar
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.16
wwpLeosCfmRemoteMEPFrameLossNear
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.15
wwpLeosCfmRemoteMEPJitter
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.13
wwpLeosCfmRemoteMEPMaxDelay
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.25
wwpLeosCfmRemoteMEPMaxJitter
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.27
wwpLeosCfmRemoteMEPMinDelay
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.24
wwpLeosCfmRemoteMEPMinJitter
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.26
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-32 Statistics
Object
OID
wwpLeosCfmRemoteMEPNumCCMLost
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.18
wwpLeosCfmRemoteMEPNumCCMRx
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.10
wwpLeosCfmRemoteMEPNumDMMSent
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.11
wwpLeosCfmRemoteMEPNumDMRReceived
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.19
wwpLeosCfmRemoteMEPNumLMMSent
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.14
wwpLeosCfmRemoteMEPNumLMRReceived
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.17
wwpLeosCfmRemoteMEPNumSLMSent
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.66
wwpLeosCfmRemoteMEPNumSLRReceived
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.69
wwpLeosCfmRxAdminDisableDropped
1.3.6.1.4.1.6141.2.60.35.1.1.25.12
wwpLeosCfmRxInvalidEtypeDropped
1.3.6.1.4.1.6141.2.60.35.1.1.25.23
wwpLeosCfmRxInvalidOpCodeDropped
1.3.6.1.4.1.6141.2.60.35.1.1.25.14
wwpLeosCfmRxSTPStateNotForwardingDropped
1.3.6.1.4.1.6141.2.60.35.1.1.25.15
wwpLeosCfmRxUnresolvedLTM
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.9
wwpLeosCfmServiceCfmControlModuleFrameBudget
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.77
wwpLeosCfmServiceFrameBudgetSlot
1.3.6.1.4.1.6141.2.60.35.1.16.1.1.2
wwpLeosCfmServiceInvalidInterfaceStatusTLV
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.5
wwpLeosCfmServiceInvalidMessageOverflow
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.3
wwpLeosCfmServiceInvalidPortStatusTLV
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.4
wwpLeosCfmServiceInvalidSenderIDTLV
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.6
wwpLeosCfmServiceNumActiveMEP
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.18
wwpLeosCfmServiceNumMEP
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.16
wwpLeosCfmServiceNumRemoteMEP
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.17
wwpLeosCfmServiceRxTotalInvalidFrames
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.2
wwpLeosCfmServiceRxTotalValidFrames
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.1
wwpLeosCfmServiceTotalRxCCMIntervalErrorCCM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.14
wwpLeosCfmServiceTotalRxContentMismatchLBR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.28
wwpLeosCfmServiceTotalRxDMM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.35
wwpLeosCfmServiceTotalRxDMR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.36
wwpLeosCfmServiceTotalRxInorderLBR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.26
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-33
Object
OID
wwpLeosCfmServiceTotalRxInSequenceCCM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.9
wwpLeosCfmServiceTotalRxInvalidCCM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.15
wwpLeosCfmServiceTotalRxInvalidLBM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.32
wwpLeosCfmServiceTotalRxInvalidLBR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.30
wwpLeosCfmServiceTotalRxInvalidLTR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.20
wwpLeosCfmServiceTotalRxInvalidRelayActionLTR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.21
wwpLeosCfmServiceTotalRxLMM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.39
wwpLeosCfmServiceTotalRxLMR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.40
wwpLeosCfmServiceTotalRxMAIDXconCCM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.12
wwpLeosCfmServiceTotalRxMDLevelXconCCM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.11
wwpLeosCfmServiceTotalRxMEPIDErrorCCM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.13
wwpLeosCfmServiceTotalRxNotInSequenceCCM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.10
wwpLeosCfmServiceTotalRxOutOfOrderLBR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.27
wwpLeosCfmServiceTotalRxSLM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.44
wwpLeosCfmServiceTotalRxSLR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.45
wwpLeosCfmServiceTotalRxUnexpectedLBR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.29
wwpLeosCfmServiceTotalRxUnexpectedLTR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.19
wwpLeosCfmServiceTotalRxValidCCM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.8
wwpLeosCfmServiceTotalRxValidLBM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.31
wwpLeosCfmServiceTotalRxValidLTM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.22
wwpLeosCfmServiceTotalRxValidLTR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.18
wwpLeosCfmServiceTotalTxDMM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.33
wwpLeosCfmServiceTotalTxDMR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.34
wwpLeosCfmServiceTotalTxInvalidLTM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.23
wwpLeosCfmServiceTotalTxLBM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.24
wwpLeosCfmServiceTotalTxLBR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.25
wwpLeosCfmServiceTotalTxLMM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.37
wwpLeosCfmServiceTotalTxLMR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.38
wwpLeosCfmServiceTotalTxLTM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.16
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-34 Statistics
Object
OID
wwpLeosCfmServiceTotalTxLTR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.17
wwpLeosCfmServiceTotalTxSLM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.42
wwpLeosCfmServiceTotalTxSLR
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.43
wwpLeosCfmServiceTxTotalCCM
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.7
wwpLeosCfmStatsRxTotalInValidFrames
1.3.6.1.4.1.6141.2.60.35.1.1.25.7
wwpLeosCfmStatsRxTotalNotValidatedFrames
1.3.6.1.4.1.6141.2.60.35.1.1.25.6
wwpLeosCfmStatsRxTotalValidFrames
1.3.6.1.4.1.6141.2.60.35.1.1.25.5
wwpLeosCfmStatsTotalRx
1.3.6.1.4.1.6141.2.60.35.1.1.25.2
wwpLeosCfmStatsTotalTx
1.3.6.1.4.1.6141.2.60.35.1.1.25.1
wwpLeosCfmStatsTxFloodedFrames
1.3.6.1.4.1.6141.2.60.35.1.1.25.3
wwpLeosCfmStatsTxFloodedIgnoredStpState
1.3.6.1.4.1.6141.2.60.35.1.1.25.4
wwpLeosCfmTotalCCMRxMAIDXcon
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.7
wwpLeosCfmTotalCCMRxMDLevelXcon
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.6
wwpLeosCfmTotalRxCCMErrorOnMepId
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.8
wwpLeosCfmTotalRxCCMInSequence
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.4
wwpLeosCfmTotalRxCCMIntervalError
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.9
wwpLeosCfmTotalRxCCMSequenceError
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.5
wwpLeosCfmTotalRxContentMismatchLBR
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.5
wwpLeosCfmTotalRxDMM
1.3.6.1.4.1.6141.2.60.35.1.1.25.29.3
wwpLeosCfmTotalRxDMR
1.3.6.1.4.1.6141.2.60.35.1.1.25.29.4
wwpLeosCfmTotalRxDropBlockedOppositeMep
1.3.6.1.4.1.6141.2.60.35.1.1.25.21
wwpLeosCfmTotalRxInOderLBR
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.3
wwpLeosCfmTotalRxInvalidCCM
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.10
wwpLeosCfmTotalRxInvalidInterfaceStatusTLV
1.3.6.1.4.1.6141.2.60.35.1.1.25.10
wwpLeosCfmTotalRxInvalidLBM
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.9
wwpLeosCfmTotalRxInvalidLBR
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.7
wwpLeosCfmTotalRxInvalidLTM
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.8
wwpLeosCfmTotalRxInvalidLTR
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.6
wwpLeosCfmTotalRxInvalidMessageOverflow
1.3.6.1.4.1.6141.2.60.35.1.1.25.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-35
Object
OID
wwpLeosCfmTotalRxInvalidPortStatusTLV
1.3.6.1.4.1.6141.2.60.35.1.1.25.9
wwpLeosCfmTotalRxInvalidSenderIDTLV
1.3.6.1.4.1.6141.2.60.35.1.1.25.11
wwpLeosCfmTotalRxLMM
1.3.6.1.4.1.6141.2.60.35.1.1.25.30.3
wwpLeosCfmTotalRxLMR
1.3.6.1.4.1.6141.2.60.35.1.1.25.30.4
wwpLeosCfmTotalRxOOOLBR
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.4
wwpLeosCfmTotalRxSLM
1.3.6.1.4.1.6141.2.60.35.1.1.25.31.3
wwpLeosCfmTotalRxSLR
1.3.6.1.4.1.6141.2.60.35.1.1.25.31.4
wwpLeosCfmTotalRxUnexpectedLBR
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.6
wwpLeosCfmTotalRxUnexpectedLTR
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.5
wwpLeosCfmTotalRxValidCCM
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.3
wwpLeosCfmTotalRxvalidLBM
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.8
wwpLeosCfmTotalRxValidLTM
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.3
wwpLeosCfmTotalRxValidLTR
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.4
wwpLeosCfmTotalTxCCM
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.1
wwpLeosCfmTotalTxCCMFlooded
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.2
wwpLeosCfmTotalTxDMM
1.3.6.1.4.1.6141.2.60.35.1.1.25.29.1
wwpLeosCfmTotalTxDMR
1.3.6.1.4.1.6141.2.60.35.1.1.25.29.2
wwpLeosCfmTotalTxLBM
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.1
wwpLeosCfmTotalTxLBR
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.2
wwpLeosCfmTotalTxLMM
1.3.6.1.4.1.6141.2.60.35.1.1.25.30.1
wwpLeosCfmTotalTxLMR
1.3.6.1.4.1.6141.2.60.35.1.1.25.30.2
wwpLeosCfmTotalTxLTM
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.1
wwpLeosCfmTotalTxLTR
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.2
wwpLeosCfmTotalTxSLM
1.3.6.1.4.1.6141.2.60.35.1.1.25.31.1
wwpLeosCfmTotalTxSLR
1.3.6.1.4.1.6141.2.60.35.1.1.25.31.2
wwpLeosDhcpRelayAgentL2IpSecHeaders
1.3.6.1.4.1.6141.2.60.17.1.2.6.1.1
wwpLeosDhcpRelayAgentL2NoTrustedClientPktDrop
1.3.6.1.4.1.6141.2.60.17.1.2.6.1.9
wwpLeosDhcpRelayAgentL2NoTrustedServerPktDrop
1.3.6.1.4.1.6141.2.60.17.1.2.6.1.8
wwpLeosDhcpRelayAgentL2Option82Added
1.3.6.1.4.1.6141.2.60.17.1.2.6.1.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-36 Statistics
Object
OID
wwpLeosDhcpRelayAgentL2Option82ExceedMTU
1.3.6.1.4.1.6141.2.60.17.1.2.6.1.7
wwpLeosDhcpRelayAgentL2Option82Removed
1.3.6.1.4.1.6141.2.60.17.1.2.6.1.3
wwpLeosDhcpRelayAgentL2SpoofedDhcpPkts
1.3.6.1.4.1.6141.2.60.17.1.2.6.1.6
wwpLeosDhcpRelayAgentL2UntrustedClientPortPktsRx
1.3.6.1.4.1.6141.2.60.17.1.2.6.1.4
wwpLeosDhcpRelayAgentL2UntrustedServerPortPktsRx
1.3.6.1.4.1.6141.2.60.17.1.2.6.1.5
wwpLeosDpTsQEgressPortQueueGroupQueueStatsDroppedBytes
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.3.1.4
wwpLeosDpTsQEgressPortQueueGroupQueueStatsDroppedPkts
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.3.1.5
wwpLeosDpTsQEgressPortQueueGroupQueueStatsTxBytes
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.3.1.2
wwpLeosDpTsQEgressPortQueueGroupQueueStatsTxPkts
1.3.6.1.4.1.6141.2.60.500.1.1.1.2.3.1.3
wwpLeosEtherPortStateMirrorGroupNumDstPorts
1.3.6.1.4.1.6141.2.60.2.1.1.4.1.5
wwpLeosEtherPortStateMirrorGroupNumSrcPorts
1.3.6.1.4.1.6141.2.60.2.1.1.4.1.4
wwpLeosFilterDropBytes
1.3.6.1.4.1.6141.2.60.15.1.1.6.1.1
wwpLeosFlowL2SacCurFilteredMac
1.3.6.1.4.1.6141.2.60.6.1.1.19.1.6
wwpLeosFlowL2SacCurMac
1.3.6.1.4.1.6141.2.60.6.1.1.19.1.5
wwpLeosFlowServiceStatsRxHi
1.3.6.1.4.1.6141.2.60.6.1.1.8.1.1
wwpLeosFlowServiceStatsRxLo
1.3.6.1.4.1.6141.2.60.6.1.1.8.1.2
wwpLeosFlowServiceStatsTxHi
1.3.6.1.4.1.6141.2.60.6.1.1.8.1.3
wwpLeosFlowServiceStatsTxLo
1.3.6.1.4.1.6141.2.60.6.1.1.8.1.4
wwpLeosFlowServiceTotalStatsRxHi
1.3.6.1.4.1.6141.2.60.6.1.1.34.1.1
wwpLeosFlowServiceTotalStatsRxLo
1.3.6.1.4.1.6141.2.60.6.1.1.34.1.2
wwpLeosFlowServiceTotalStatsTxHi
1.3.6.1.4.1.6141.2.60.6.1.1.34.1.3
wwpLeosFlowServiceTotalStatsTxLo
1.3.6.1.4.1.6141.2.60.6.1.1.34.1.4
wwpLeosFlowSMappingStatsRxHi
1.3.6.1.4.1.6141.2.60.6.1.1.14.1.1
wwpLeosFlowSMappingStatsRxLo
1.3.6.1.4.1.6141.2.60.6.1.1.14.1.2
wwpLeosFlowSMappingStatsTxHi
1.3.6.1.4.1.6141.2.60.6.1.1.14.1.3
wwpLeosFlowSMappingStatsTxLo
1.3.6.1.4.1.6141.2.60.6.1.1.14.1.4
wwpLeosIpAclBadDscp
1.3.6.1.4.1.6141.2.60.24.1.2.6
wwpLeosIpAclBadPort
1.3.6.1.4.1.6141.2.60.24.1.2.4
wwpLeosIpAclCacheHit
1.3.6.1.4.1.6141.2.60.24.1.2.2
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-37
Object
OID
wwpLeosIpAclEntryBadDscp
1.3.6.1.4.1.6141.2.60.24.1.3.1.1.8
wwpLeosIpAclEntryBadPort
1.3.6.1.4.1.6141.2.60.24.1.3.1.1.5
wwpLeosIpAclEntryHits
1.3.6.1.4.1.6141.2.60.24.1.3.1.1.4
wwpLeosIpAclInUseEntries
1.3.6.1.4.1.6141.2.60.24.1.2.8
wwpLeosIpAclMaxEntries
1.3.6.1.4.1.6141.2.60.24.1.2.9
wwpLeosIpAclNoHit
1.3.6.1.4.1.6141.2.60.24.1.2.3
wwpLeosMcastBadChecksum
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.11
wwpLeosMcastHostDiscards
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.10
wwpLeosMcastJoinMessages
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.3
wwpLeosMcastL2L3Mismatch
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.12
wwpLeosMcastLeaveMessages
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.4
wwpLeosMcastLingerCount
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.14
wwpLeosMcastMemberCount
1.3.6.1.4.1.6141.2.60.7.1.2.1.1.5
wwpLeosMcastQueryDiscards
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.6
wwpLeosMcastQueryMessages
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.5
wwpLeosMcastQueryTimeouts
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.7
wwpLeosMcastRouterDiscards
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.9
wwpLeosMcastStatsQuerySrcIpZeroDiscard
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.20
wwpLeosMcastTotalMembers
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.13
wwpLeosMcastUnknownPktType
1.3.6.1.4.1.6141.2.60.7.1.3.1.1.8
wwpLeosMstpPortStatsRxCfgBpdu
1.3.6.1.4.1.6141.2.60.37.1.4.2.1.4
wwpLeosMstpPortStatsRxMstBpdu
1.3.6.1.4.1.6141.2.60.37.1.4.2.1.6
wwpLeosMstpPortStatsRxRstBpdu
1.3.6.1.4.1.6141.2.60.37.1.4.2.1.5
wwpLeosMstpPortStatsRxTcnBpdu
1.3.6.1.4.1.6141.2.60.37.1.4.2.1.3
wwpLeosMstpPortStatsTxCfgBpdu
1.3.6.1.4.1.6141.2.60.37.1.4.2.1.8
wwpLeosMstpPortStatsTxMstBpdu
1.3.6.1.4.1.6141.2.60.37.1.4.2.1.10
wwpLeosMstpPortStatsTxRstBpdu
1.3.6.1.4.1.6141.2.60.37.1.4.2.1.9
wwpLeosMstpPortStatsTxTcnBpdu
1.3.6.1.4.1.6141.2.60.37.1.4.2.1.7
wwpLeosOamDuplicateEventNotificationRx
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.18
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-38 Statistics
Object
OID
wwpLeosOamDuplicateEventNotificationTx
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.17
wwpLeosOamEventLogRunningTotal
1.3.6.1.4.1.6141.2.60.400.1.2.7.1.12
wwpLeosOamEventLogValue
1.3.6.1.4.1.6141.2.60.400.1.2.7.1.11
wwpLeosOamframesLostDueToOam
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.15
wwpLeosOamInformationRx
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.2
wwpLeosOamInformationTx
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.1
wwpLeosOamLoopbackControlRx
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.6
wwpLeosOamLoopbackControlTx
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.5
wwpLeosOamOrgSpecificRx
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.12
wwpLeosOamOrgSpecificTx
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.11
wwpLeosOamUniqueEventNotificationRx
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.4
wwpLeosOamUniqueEventNotificationTx
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.3
wwpLeosOamUnsupportedCodesRx
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.14
wwpLeosOamUnsupportedCodesTx
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.13
wwpLeosOamVariableRequestRx
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.8
wwpLeosOamVariableRequestTx
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.7
wwpLeosOamVariableResponseRx
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.10
wwpLeosOamVariableResponseTx
1.3.6.1.4.1.6141.2.60.400.1.2.4.1.9
wwpLeosPbtBridgeNameMacMapUseCount
1.3.6.1.4.1.6141.2.60.38.1.1.2.1.4
wwpLeosPbtLocalBridgeNameMacMapUseCount
1.3.6.1.4.1.6141.2.60.38.1.1.6.1.4
wwpLeosPbtVirtualCircuitRxBytesHi
1.3.6.1.4.1.6141.2.60.38.1.1.5.1.3
wwpLeosPbtVirtualCircuitRxBytesLo
1.3.6.1.4.1.6141.2.60.38.1.1.5.1.4
wwpLeosPbtVirtualCircuitTxBytesHi
1.3.6.1.4.1.6141.2.60.38.1.1.5.1.1
wwpLeosPbtVirtualCircuitTxBytesLo
1.3.6.1.4.1.6141.2.60.38.1.1.5.1.2
wwpLeosPingReceivedPackets
1.3.6.1.4.1.6141.2.60.19.1.9
wwpLeosPingSentPackets
1.3.6.1.4.1.6141.2.60.19.1.8
wwpLeosPortHCStats1024To1518BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.15
wwpLeosPortHCStats128To255BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.12
wwpLeosPortHCStats1519To2047BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.35
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-39
Object
OID
wwpLeosPortHCStats2048To4095BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.36
wwpLeosPortHCStats256To511BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.13
wwpLeosPortHCStats4096To9216BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.37
wwpLeosPortHCStats512To1023BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.14
wwpLeosPortHCStats64BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.10
wwpLeosPortHCStats65To127BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.11
wwpLeosPortHCStatsFragmentPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.8
wwpLeosPortHCStatsJabberPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.9
wwpLeosPortHCStatsOversizePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.7
wwpLeosPortHCStatsRxBcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.5
wwpLeosPortHCStatsRxBytes
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.2
wwpLeosPortHCStatsRxCrcErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.4
wwpLeosPortHCStatsRxDiscardPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.51
wwpLeosPortHCStatsRxDropPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.50
wwpLeosPortHCStatsRxInErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.53
wwpLeosPortHCStatsRxLOutRangePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.52
wwpLeosPortHCStatsRxMcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.33
wwpLeosPortHCStatsRxPausePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.34
wwpLeosPortHCStatsRxPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.3
wwpLeosPortHCStatsRxUcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.48
wwpLeosPortHCStatsTx1024To1518BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.44
wwpLeosPortHCStatsTx128To255BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.41
wwpLeosPortHCStatsTx1519To2047BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.45
wwpLeosPortHCStatsTx2048To4095BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.46
wwpLeosPortHCStatsTx256To511BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.42
wwpLeosPortHCStatsTx4096To9216BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.47
wwpLeosPortHCStatsTx512To1023BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.43
wwpLeosPortHCStatsTx64BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.39
wwpLeosPortHCStatsTx65To127BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.40
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-40 Statistics
Object
OID
wwpLeosPortHCStatsTxBcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.31
wwpLeosPortHCStatsTxBytes
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.16
wwpLeosPortHCStatsTxCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.28
wwpLeosPortHCStatsTxCrcErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.22
wwpLeosPortHCStatsTxDeferPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.38
wwpLeosPortHCStatsTxExCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.26
wwpLeosPortHCStatsTxExDeferPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.19
wwpLeosPortHCStatsTxGiantPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.20
wwpLeosPortHCStatsTxLateCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.25
wwpLeosPortHCStatsTxLCheckErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.23
wwpLeosPortHCStatsTxLOutRangePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.24
wwpLeosPortHCStatsTxMcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.30
wwpLeosPortHCStatsTxPausePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.29
wwpLeosPortHCStatsTxPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.18
wwpLeosPortHCStatsTxSingleCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.27
wwpLeosPortHCStatsTxTBytes
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.17
wwpLeosPortHCStatsTxUcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.49
wwpLeosPortHCStatsTxUnderRunPkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.21
wwpLeosPortHCStatsUndersizePkts
1.3.6.1.4.1.6141.2.60.3.1.1.4.1.6
wwpLeosPortStats1024To1518BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.15
wwpLeosPortStats128To255BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.12
wwpLeosPortStats1519To2047BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.35
wwpLeosPortStats2048To4095BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.36
wwpLeosPortStats256To511BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.13
wwpLeosPortStats4096To9216BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.37
wwpLeosPortStats512To1023BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.14
wwpLeosPortStats64BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.10
wwpLeosPortStats65To127BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.11
wwpLeosPortStatsFpgaRxCrcErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.61
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-41
Object
OID
wwpLeosPortStatsFpgaRxErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.60
wwpLeosPortStatsFpgaRxIpCrcErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.62
wwpLeosPortStatsFpgaVlanPriFilterDropPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.59
wwpLeosPortStatsFragmentPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.8
wwpLeosPortStatsJabberPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.9
wwpLeosPortStatsOversizePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.7
wwpLeosPortStatsPortLinkDown
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.50
wwpLeosPortStatsPortLinkFlap
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.51
wwpLeosPortStatsPortLinkUp
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.49
wwpLeosPortStatsRxBcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.5
wwpLeosPortStatsRxBytes
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.2
wwpLeosPortStatsRxCrcErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.4
wwpLeosPortStatsRxDiscardPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.55
wwpLeosPortStatsRxDropPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.54
wwpLeosPortStatsRxFpgaBufferDropPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.57
wwpLeosPortStatsRxFpgaDropPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.48
wwpLeosPortStatsRxInErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.63
wwpLeosPortStatsRxLOutRangePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.56
wwpLeosPortStatsRxMcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.33
wwpLeosPortStatsRxPausePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.34
wwpLeosPortStatsRxPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.3
wwpLeosPortStatsRxUcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.52
wwpLeosPortStatsTx1024To1518BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.44
wwpLeosPortStatsTx128To255BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.41
wwpLeosPortStatsTx1519To2047BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.45
wwpLeosPortStatsTx2048To4095BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.46
wwpLeosPortStatsTx256To511BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.42
wwpLeosPortStatsTx4096To9216BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.47
wwpLeosPortStatsTx512To1023BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.43
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-42 Statistics
Object
OID
wwpLeosPortStatsTx64BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.39
wwpLeosPortStatsTx65To127BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.40
wwpLeosPortStatsTxBcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.31
wwpLeosPortStatsTxBytes
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.16
wwpLeosPortStatsTxCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.28
wwpLeosPortStatsTxCrcErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.22
wwpLeosPortStatsTxDeferPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.38
wwpLeosPortStatsTxExCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.26
wwpLeosPortStatsTxExDeferPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.19
wwpLeosPortStatsTxFpgaBufferDropPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.58
wwpLeosPortStatsTxGiantPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.20
wwpLeosPortStatsTxLateCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.25
wwpLeosPortStatsTxLCheckErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.23
wwpLeosPortStatsTxLOutRangePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.24
wwpLeosPortStatsTxMcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.30
wwpLeosPortStatsTxPausePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.29
wwpLeosPortStatsTxPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.18
wwpLeosPortStatsTxSingleCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.27
wwpLeosPortStatsTxTBytes
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.17
wwpLeosPortStatsTxUcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.53
wwpLeosPortStatsTxUnderRunPkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.21
wwpLeosPortStatsUndersizePkts
1.3.6.1.4.1.6141.2.60.3.1.1.2.1.6
wwpLeosPortTotalHCStats1024To1518BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.15
wwpLeosPortTotalHCStats128To255BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.12
wwpLeosPortTotalHCStats1519To2047BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.35
wwpLeosPortTotalHCStats2048To4095BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.36
wwpLeosPortTotalHCStats256To511BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.13
wwpLeosPortTotalHCStats4096To9216BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.37
wwpLeosPortTotalHCStats512To1023BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.14
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-43
Object
OID
wwpLeosPortTotalHCStats64BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.10
wwpLeosPortTotalHCStats65To127BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.11
wwpLeosPortTotalHCStatsFragmentPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.8
wwpLeosPortTotalHCStatsJabberPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.9
wwpLeosPortTotalHCStatsOversizePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.7
wwpLeosPortTotalHCStatsRxBcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.5
wwpLeosPortTotalHCStatsRxBytes
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.2
wwpLeosPortTotalHCStatsRxCrcErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.4
wwpLeosPortTotalHCStatsRxDiscardPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.51
wwpLeosPortTotalHCStatsRxDropPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.50
wwpLeosPortTotalHCStatsRxInErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.53
wwpLeosPortTotalHCStatsRxLOutRangePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.52
wwpLeosPortTotalHCStatsRxMcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.33
wwpLeosPortTotalHCStatsRxPausePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.34
wwpLeosPortTotalHCStatsRxPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.3
wwpLeosPortTotalHCStatsRxUcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.48
wwpLeosPortTotalHCStatsTx1024To1518BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.44
wwpLeosPortTotalHCStatsTx128To255BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.41
wwpLeosPortTotalHCStatsTx1519To2047BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.45
wwpLeosPortTotalHCStatsTx2048To4095BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.46
wwpLeosPortTotalHCStatsTx256To511BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.42
wwpLeosPortTotalHCStatsTx4096To9216BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.47
wwpLeosPortTotalHCStatsTx512To1023BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.43
wwpLeosPortTotalHCStatsTx64BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.39
wwpLeosPortTotalHCStatsTx65To127BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.40
wwpLeosPortTotalHCStatsTxBcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.31
wwpLeosPortTotalHCStatsTxBytes
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.16
wwpLeosPortTotalHCStatsTxCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.28
wwpLeosPortTotalHCStatsTxCrcErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.22
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-44 Statistics
Object
OID
wwpLeosPortTotalHCStatsTxDeferPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.38
wwpLeosPortTotalHCStatsTxExCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.26
wwpLeosPortTotalHCStatsTxExDeferPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.19
wwpLeosPortTotalHCStatsTxGiantPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.20
wwpLeosPortTotalHCStatsTxLateCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.25
wwpLeosPortTotalHCStatsTxLCheckErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.23
wwpLeosPortTotalHCStatsTxLOutRangePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.24
wwpLeosPortTotalHCStatsTxMcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.30
wwpLeosPortTotalHCStatsTxPausePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.29
wwpLeosPortTotalHCStatsTxPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.18
wwpLeosPortTotalHCStatsTxSingleCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.27
wwpLeosPortTotalHCStatsTxTBytes
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.17
wwpLeosPortTotalHCStatsTxUcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.49
wwpLeosPortTotalHCStatsTxUnderRunPkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.21
wwpLeosPortTotalHCStatsUndersizePkts
1.3.6.1.4.1.6141.2.60.3.1.1.5.1.6
wwpLeosPortTotalStats1024To1518BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.15
wwpLeosPortTotalStats128To255BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.12
wwpLeosPortTotalStats1519To2047BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.35
wwpLeosPortTotalStats2048To4095BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.36
wwpLeosPortTotalStats256To511BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.13
wwpLeosPortTotalStats4096To9216BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.37
wwpLeosPortTotalStats512To1023BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.14
wwpLeosPortTotalStats64BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.10
wwpLeosPortTotalStats65To127BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.11
wwpLeosPortTotalStatsFpgaRxCrcErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.61
wwpLeosPortTotalStatsFpgaRxErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.60
wwpLeosPortTotalStatsFpgaRxIpCrcErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.62
wwpLeosPortTotalStatsFpgaVlanPriFilterDropPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.59
wwpLeosPortTotalStatsFragmentPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-45
Object
OID
wwpLeosPortTotalStatsJabberPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.9
wwpLeosPortTotalStatsOversizePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.7
wwpLeosPortTotalStatsPortLinkDown
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.50
wwpLeosPortTotalStatsPortLinkFlap
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.51
wwpLeosPortTotalStatsPortLinkUp
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.49
wwpLeosPortTotalStatsRxBcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.5
wwpLeosPortTotalStatsRxBytes
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.2
wwpLeosPortTotalStatsRxCrcErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.4
wwpLeosPortTotalStatsRxDiscardPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.55
wwpLeosPortTotalStatsRxDropPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.54
wwpLeosPortTotalStatsRxFpgaBufferDropPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.57
wwpLeosPortTotalStatsRxFpgaDropPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.48
wwpLeosPortTotalStatsRxInErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.63
wwpLeosPortTotalStatsRxLOutRangePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.56
wwpLeosPortTotalStatsRxMcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.33
wwpLeosPortTotalStatsRxPausePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.34
wwpLeosPortTotalStatsRxPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.3
wwpLeosPortTotalStatsRxUcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.52
wwpLeosPortTotalStatsTx1024To1518BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.44
wwpLeosPortTotalStatsTx128To255BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.41
wwpLeosPortTotalStatsTx1519To2047BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.45
wwpLeosPortTotalStatsTx2048To4095BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.46
wwpLeosPortTotalStatsTx256To511BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.42
wwpLeosPortTotalStatsTx4096To9216BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.47
wwpLeosPortTotalStatsTx512To1023BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.43
wwpLeosPortTotalStatsTx64BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.39
wwpLeosPortTotalStatsTx65To127BytePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.40
wwpLeosPortTotalStatsTxBcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.31
wwpLeosPortTotalStatsTxBytes
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.16
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-46 Statistics
Object
OID
wwpLeosPortTotalStatsTxCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.28
wwpLeosPortTotalStatsTxCrcErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.22
wwpLeosPortTotalStatsTxDeferPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.38
wwpLeosPortTotalStatsTxExCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.26
wwpLeosPortTotalStatsTxExDeferPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.19
wwpLeosPortTotalStatsTxFpgaBufferDropPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.58
wwpLeosPortTotalStatsTxGiantPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.20
wwpLeosPortTotalStatsTxLateCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.25
wwpLeosPortTotalStatsTxLCheckErrorPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.23
wwpLeosPortTotalStatsTxLOutRangePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.24
wwpLeosPortTotalStatsTxMcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.30
wwpLeosPortTotalStatsTxPausePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.29
wwpLeosPortTotalStatsTxPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.18
wwpLeosPortTotalStatsTxSingleCollPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.27
wwpLeosPortTotalStatsTxTBytes
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.17
wwpLeosPortTotalStatsTxUcastPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.53
wwpLeosPortTotalStatsTxUnderRunPkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.21
wwpLeosPortTotalStatsUndersizePkts
1.3.6.1.4.1.6141.2.60.3.1.1.3.1.6
wwpLeosRadiusClientServerAccessAccepts
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.9
wwpLeosRadiusClientServerAccessChallenges
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.11
wwpLeosRadiusClientServerAccessRejects
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.10
wwpLeosRadiusClientServerAccessRequests
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.7
wwpLeosRadiusClientServerAccessRetransmissions
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.8
wwpLeosRadiusClientServerBadAuthenticators
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.13
wwpLeosRadiusClientServerMalformedAccessResponses
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.12
wwpLeosRadiusClientServerPacketsDropped
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.17
wwpLeosRadiusClientServerTimeouts
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.15
wwpLeosRadiusClientServerUnknownTypes
1.3.6.1.4.1.6141.2.60.20.1.1.6.1.16
wwpLeosRapsVirtualRingEastPortFsRxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.31
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-47
Object
OID
wwpLeosRapsVirtualRingEastPortFsTxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.32
wwpLeosRapsVirtualRingEastPortNrRbRxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.33
wwpLeosRapsVirtualRingEastPortNrRbTxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.34
wwpLeosRapsVirtualRingEastPortNrRxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.27
wwpLeosRapsVirtualRingEastPortNrTxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.28
wwpLeosRapsVirtualRingEastPortSfRxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.29
wwpLeosRapsVirtualRingEastPortSfTxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.30
wwpLeosRapsVirtualRingTotalDownTime
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.12
wwpLeosRapsVirtualRingUptimeFromLastFailure
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.11
wwpLeosRapsVirtualRingWestPortFsRxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.20
wwpLeosRapsVirtualRingWestPortFsTxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.21
wwpLeosRapsVirtualRingWestPortNrRbRxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.22
wwpLeosRapsVirtualRingWestPortNrRbTxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.23
wwpLeosRapsVirtualRingWestPortNrRxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.16
wwpLeosRapsVirtualRingWestPortNrTxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.17
wwpLeosRapsVirtualRingWestPortSfRxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.18
wwpLeosRapsVirtualRingWestPortSfTxd
1.3.6.1.4.1.6141.2.60.47.1.3.1.1.19
wwpLeosTableChgNotifNumChanges
1.3.6.1.4.1.6141.2.60.9.1.4.1.3
wwpLeosTacacsClientAccountingServerAccessAccepts
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.8
wwpLeosTacacsClientAccountingServerAccessRejects
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.9
wwpLeosTacacsClientAccountingServerAccessRequests
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.6
wwpLeosTacacsClientAccountingServerAccessRetransmissions
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.7
wwpLeosTacacsClientAccountingServerBadAuthenticators
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.11
wwpLeosTacacsClientAccountingServerBadHeaderSequence
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.15
wwpLeosTacacsClientAccountingServerMalformedAccessResponses
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.10
wwpLeosTacacsClientAccountingServerTimeouts
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.13
wwpLeosTacacsClientAccountingServerUnknownTypes
1.3.6.1.4.1.6141.2.60.402.1.1.16.1.14
wwpLeosTacacsClientAuthenticationServerAccessAccepts
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.8
wwpLeosTacacsClientAuthenticationServerAccessRejects
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.9
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-48 Statistics
Object
OID
wwpLeosTacacsClientAuthenticationServerAccessRequests
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.6
wwpLeosTacacsClientAuthenticationServerAccessRetransmissions
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.7
wwpLeosTacacsClientAuthenticationServerBadAuthenticators
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.11
wwpLeosTacacsClientAuthenticationServerBadHeaderSequence
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.15
wwpLeosTacacsClientAuthenticationServerMalformedAccessResponses
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.10
wwpLeosTacacsClientAuthenticationServerTimeouts
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.13
wwpLeosTacacsClientAuthenticationServerUnknownTypes
1.3.6.1.4.1.6141.2.60.402.1.1.14.1.14
wwpLeosTacacsClientAuthorizationServerAccessAccepts
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.8
wwpLeosTacacsClientAuthorizationServerAccessRejects
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.9
wwpLeosTacacsClientAuthorizationServerAccessRequests
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.6
wwpLeosTacacsClientAuthorizationServerAccessRetransmissions
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.7
wwpLeosTacacsClientAuthorizationServerBadAuthenticators
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.11
wwpLeosTacacsClientAuthorizationServerBadHeaderSequence
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.15
wwpLeosTacacsClientAuthorizationServerMalformedAccessResponses
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.10
wwpLeosTacacsClientAuthorizationServerTimeouts
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.13
wwpLeosTacacsClientAuthorizationServerUnknownTypes
1.3.6.1.4.1.6141.2.60.402.1.1.15.1.14
wwpLeosTacacsClientGlobalAccountingAccessAccepts
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.30
wwpLeosTacacsClientGlobalAccountingAccessRejects
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.31
wwpLeosTacacsClientGlobalAccountingAccessRequests
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.28
wwpLeosTacacsClientGlobalAccountingAccessRetransmissions
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.29
wwpLeosTacacsClientGlobalAccountingBadAuthenticators
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.33
wwpLeosTacacsClientGlobalAccountingBadHeaderSequence
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.36
wwpLeosTacacsClientGlobalAccountingMalformedAccessResponses
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.32
wwpLeosTacacsClientGlobalAccountingTimeouts
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.34
wwpLeosTacacsClientGlobalAccountingUnknownTypes
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.35
wwpLeosTacacsClientGlobalAuthorizationAccessAccepts
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.21
wwpLeosTacacsClientGlobalAuthorizationAccessRejects
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.22
wwpLeosTacacsClientGlobalAuthorizationAccessRequests
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.19
wwpLeosTacacsClientGlobalAuthorizationAccessRetransmissions
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.20
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-49
Object
OID
wwpLeosTacacsClientGlobalAuthorizationBadAuthenticators
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.24
wwpLeosTacacsClientGlobalAuthorizationBadHeaderSequence
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.27
wwpLeosTacacsClientGlobalAuthorizationMalformedAccessResponses
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.23
wwpLeosTacacsClientGlobalAuthorizationTimeouts
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.25
wwpLeosTacacsClientGlobalAuthorizationUnknownTypes
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.26
wwpLeosTacacsClientServerAccessAccepts
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.8
wwpLeosTacacsClientServerAccessRejects
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.9
wwpLeosTacacsClientServerAccessRequests
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.6
wwpLeosTacacsClientServerAccessRetransmissions
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.7
wwpLeosTacacsClientServerBadAuthenticators
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.11
wwpLeosTacacsClientServerBadHeaderSequence
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.15
wwpLeosTacacsClientServerMalformedAccessResponses
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.10
wwpLeosTacacsClientServerTimeouts
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.13
wwpLeosTacacsClientServerUnknownTypes
1.3.6.1.4.1.6141.2.60.402.1.1.13.1.14
wwpLeosTceCfmMEPDMMDelay
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.19
wwpLeosTceCfmMEPDMMJitter
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.20
wwpLeosTceCfmMEPLMMFrameLossFar
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.23
wwpLeosTceCfmMEPLMMFrameLossNear
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.22
wwpLeosTceCfmMEPNextLbmSeqNumber
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.9
wwpLeosTceCfmMEPNextLTMSeqNumber
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.12
wwpLeosTceCfmMEPNumCCMReceived
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.67
wwpLeosTceCfmMEPNumCCMTxmt
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.16
wwpLeosTceCfmMEPNumDMMSent
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.18
wwpLeosTceCfmMEPNumLbmReceived
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.62
wwpLeosTceCfmMEPNumLbmTxmt
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.61
wwpLeosTceCfmMEPNumLMMSent
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.21
wwpLeosTceCfmMEPNumLoopbackRepliesReceived
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.63
wwpLeosTceCfmMEPNumLoopbackRepliesTxmt
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.13
wwpLeosTceCfmMEPNumLTMRecevied
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.14
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-50 Statistics
Object
OID
wwpLeosTceCfmMEPNumLTMTxmt
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.15
wwpLeosTceCfmMEPNumLTRepliesReceived
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.65
wwpLeosTceCfmMEPNumLTRepliesTxmt
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.64
wwpLeosTceCfmMEPNumUnexpectedLTRepliesReceived
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.66
wwpLeosTceCfmMEPRxContentMismatchLoopbackReply
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.68
wwpLeosTceCfmMEPRxUnexpectedLoopbackReply
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.69
wwpLeosTceCfmMEPRxValidInOrderLoopbackReply
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.10
wwpLeosTceCfmMEPRxValidOutOrderLoopbackReply
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.11
wwpLeosTceCfmMipCCMdbNumCCMRx
1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.5
wwpLeosTrafficProfileCascadedAcceptedBytesHi
1.3.6.1.4.1.6141.2.60.27.1.1.8.1.1
wwpLeosTrafficProfileCascadedAcceptedBytesLo
1.3.6.1.4.1.6141.2.60.27.1.1.8.1.2
wwpLeosTrafficProfileCascadedDroppedBytesHi
1.3.6.1.4.1.6141.2.60.27.1.1.8.1.3
wwpLeosTrafficProfileCascadedDroppedBytesLo
1.3.6.1.4.1.6141.2.60.27.1.1.8.1.4
wwpLeosTrafficProfileCascadedRemarkedBytesHi
1.3.6.1.4.1.6141.2.60.27.1.1.8.1.5
wwpLeosTrafficProfileCascadedRemarkedBytesLo
1.3.6.1.4.1.6141.2.60.27.1.1.8.1.6
wwpLeosTrafficProfileCascadedTotalAcceptedBytesHi
1.3.6.1.4.1.6141.2.60.27.1.1.11.1.1
wwpLeosTrafficProfileCascadedTotalAcceptedBytesLo
1.3.6.1.4.1.6141.2.60.27.1.1.11.1.2
wwpLeosTrafficProfileCascadedTotalDroppedBytesHi
1.3.6.1.4.1.6141.2.60.27.1.1.11.1.3
wwpLeosTrafficProfileCascadedTotalDroppedBytesLo
1.3.6.1.4.1.6141.2.60.27.1.1.11.1.4
wwpLeosTrafficProfileCascadedTotalRemarkedBytesHi
1.3.6.1.4.1.6141.2.60.27.1.1.11.1.5
wwpLeosTrafficProfileCascadedTotalRemarkedBytesLo
1.3.6.1.4.1.6141.2.60.27.1.1.11.1.6
wwpLeosTrafficProfileStdAcceptedBytesHi
1.3.6.1.4.1.6141.2.60.27.1.1.9.1.1
wwpLeosTrafficProfileStdAcceptedBytesLo
1.3.6.1.4.1.6141.2.60.27.1.1.9.1.2
wwpLeosTrafficProfileStdDroppedBytesHi
1.3.6.1.4.1.6141.2.60.27.1.1.9.1.3
wwpLeosTrafficProfileStdDroppedBytesLo
1.3.6.1.4.1.6141.2.60.27.1.1.9.1.4
wwpLeosTrafficProfileStdHCAcceptedBytes
1.3.6.1.4.1.6141.2.60.27.1.1.9.1.5
wwpLeosTrafficProfileStdHCAcceptedPackets
1.3.6.1.4.1.6141.2.60.27.1.1.9.1.7
wwpLeosTrafficProfileStdHCDroppedBytes
1.3.6.1.4.1.6141.2.60.27.1.1.9.1.6
wwpLeosTrafficProfileStdHCDroppedPackets
1.3.6.1.4.1.6141.2.60.27.1.1.9.1.8
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-51
Object
OID
wwpLeosTrafficProfileStdTotalAcceptedBytesHi
1.3.6.1.4.1.6141.2.60.27.1.1.12.1.1
wwpLeosTrafficProfileStdTotalAcceptedBytesLo
1.3.6.1.4.1.6141.2.60.27.1.1.12.1.2
wwpLeosTrafficProfileStdTotalDroppedBytesHi
1.3.6.1.4.1.6141.2.60.27.1.1.12.1.3
wwpLeosTrafficProfileStdTotalDroppedBytesLo
1.3.6.1.4.1.6141.2.60.27.1.1.12.1.4
wwpLeosUserWhoIdleTime
1.3.6.1.4.1.6141.2.60.39.1.1.2.1.4
1.3.6.1.4.1.6141.2.60.5.1.1.9.6
wwpLeosVlanl2AllDecodedPkts
1.3.6.1.4.1.6141.2.60.5.1.1.9.5
wwpLeosVlanl2AllDiscardedPkts
1.3.6.1.4.1.6141.2.60.5.1.1.9.4
wwpLeosVlanl2AllPeerPkts
1.3.6.1.4.1.6141.2.60.5.1.1.9.3
wwpLeosVlanl2AllRxPkts
1.3.6.1.4.1.6141.2.60.5.1.1.9.1
wwpLeosVlanl2AllTunneledPkts
1.3.6.1.4.1.6141.2.60.5.1.1.9.2
wwpLeosVlanl2AllTunneledSubcriberPortPkts
1.3.6.1.4.1.6141.2.60.5.1.1.9.7
wwpLeosVlanl2DecodedFailures
1.3.6.1.4.1.6141.2.60.5.1.1.10.1.6
wwpLeosVlanl2DecodedPkts
1.3.6.1.4.1.6141.2.60.5.1.1.10.1.5
wwpLeosVlanl2DiscardedPkts
1.3.6.1.4.1.6141.2.60.5.1.1.10.1.4
wwpLeosVlanl2PeerPkts
1.3.6.1.4.1.6141.2.60.5.1.1.10.1.3
wwpLeosVlanl2RxPkts
1.3.6.1.4.1.6141.2.60.5.1.1.10.1.1
wwpLeosVlanl2TunneledPkts
1.3.6.1.4.1.6141.2.60.5.1.1.10.1.2
wwpLeosVlanl2TunneledSubcriberPortPkts
1.3.6.1.4.1.6141.2.60.5.1.1.10.1.7
wwpLeosVlanStatsNonUniOctets
1.3.6.1.4.1.6141.2.60.5.1.1.11.1.5
wwpLeosVlanStatsNonUniPkts
1.3.6.1.4.1.6141.2.60.5.1.1.11.1.6
wwpLeosVlanStatsUniOctets
1.3.6.1.4.1.6141.2.60.5.1.1.11.1.3
wwpLeosVlanStatsUniPkts
1.3.6.1.4.1.6141.2.60.5.1.1.11.1.4
wwpLeosVlanTotalStatsNonUniOctets
1.3.6.1.4.1.6141.2.60.5.1.1.12.1.5
wwpLeosVlanTotalStatsNonUniPkts
1.3.6.1.4.1.6141.2.60.5.1.1.12.1.6
wwpLeosVlanTotalStatsUniOctets
1.3.6.1.4.1.6141.2.60.5.1.1.12.1.3
wwpLeosVlanTotalStatsUniPkts
1.3.6.1.4.1.6141.2.60.5.1.1.12.1.4
wwpLeosVplsVirtualCircuitEthRxBytesHi
1.3.6.1.4.1.6141.2.60.28.1.1.19.1.3
wwpLeosVplsVirtualCircuitEthRxBytesLo
1.3.6.1.4.1.6141.2.60.28.1.1.19.1.4
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-52 Statistics
Object
OID
wwpLeosVplsVirtualCircuitEthTotalRxBytesHi
1.3.6.1.4.1.6141.2.60.28.1.1.36.1.3
wwpLeosVplsVirtualCircuitEthTotalRxBytesLo
1.3.6.1.4.1.6141.2.60.28.1.1.36.1.4
wwpLeosVplsVirtualCircuitEthTotalTxBytesHi
1.3.6.1.4.1.6141.2.60.28.1.1.36.1.1
wwpLeosVplsVirtualCircuitEthTotalTxBytesLo
1.3.6.1.4.1.6141.2.60.28.1.1.36.1.2
wwpLeosVplsVirtualCircuitEthTxBytesHi
1.3.6.1.4.1.6141.2.60.28.1.1.19.1.1
wwpLeosVplsVirtualCircuitEthTxBytesLo
1.3.6.1.4.1.6141.2.60.28.1.1.19.1.2
wwpLeosVplsVirtualCircuitMplsRxBytesHi
1.3.6.1.4.1.6141.2.60.28.1.1.16.1.3
wwpLeosVplsVirtualCircuitMplsRxBytesLo
1.3.6.1.4.1.6141.2.60.28.1.1.16.1.4
wwpLeosVplsVirtualCircuitMplsTotalRxBytesHi
1.3.6.1.4.1.6141.2.60.28.1.1.37.1.3
wwpLeosVplsVirtualCircuitMplsTotalRxBytesLo
1.3.6.1.4.1.6141.2.60.28.1.1.37.1.4
wwpLeosVplsVirtualCircuitMplsTotalTxBytesHi
1.3.6.1.4.1.6141.2.60.28.1.1.37.1.1
wwpLeosVplsVirtualCircuitMplsTotalTxBytesLo
1.3.6.1.4.1.6141.2.60.28.1.1.37.1.2
wwpLeosVplsVirtualCircuitMplsTxBytesHi
1.3.6.1.4.1.6141.2.60.28.1.1.16.1.1
wwpLeosVplsVirtualCircuitMplsTxBytesLo
1.3.6.1.4.1.6141.2.60.28.1.1.16.1.2
wwpLeosVplsVirtualSwitchCFTProtol2DecodedFailures
1.3.6.1.4.1.6141.2.60.28.1.1.50.1.7
wwpLeosVplsVirtualSwitchCFTProtol2DecodedPkts
1.3.6.1.4.1.6141.2.60.28.1.1.50.1.6
wwpLeosVplsVirtualSwitchCFTProtol2DiscardedPkts
1.3.6.1.4.1.6141.2.60.28.1.1.50.1.5
wwpLeosVplsVirtualSwitchCFTProtol2PeerPkts
1.3.6.1.4.1.6141.2.60.28.1.1.50.1.4
wwpLeosVplsVirtualSwitchCFTProtol2RxPkts
1.3.6.1.4.1.6141.2.60.28.1.1.50.1.2
wwpLeosVplsVirtualSwitchCFTProtol2TunneledPkts
1.3.6.1.4.1.6141.2.60.28.1.1.50.1.3
wwpLeosVplsVirtualSwitchCFTProtol2TunneledSubcriberPortPkts
1.3.6.1.4.1.6141.2.60.28.1.1.50.1.8
wwpLeosVplsVirtualSwitchCFTProtoTotall2DecodedFailures
1.3.6.1.4.1.6141.2.60.28.1.1.51.1.7
wwpLeosVplsVirtualSwitchCFTProtoTotall2DecodedPkts
1.3.6.1.4.1.6141.2.60.28.1.1.51.1.6
wwpLeosVplsVirtualSwitchCFTProtoTotall2DiscardedPkts
1.3.6.1.4.1.6141.2.60.28.1.1.51.1.5
wwpLeosVplsVirtualSwitchCFTProtoTotall2PeerPkts
1.3.6.1.4.1.6141.2.60.28.1.1.51.1.4
wwpLeosVplsVirtualSwitchCFTProtoTotall2RxPkts
1.3.6.1.4.1.6141.2.60.28.1.1.51.1.2
wwpLeosVplsVirtualSwitchCFTProtoTotall2TunneledPkts
1.3.6.1.4.1.6141.2.60.28.1.1.51.1.3
wwpLeosVplsVirtualSwitchCFTProtoTotall2TunneledSubcriberPortPkts
1.3.6.1.4.1.6141.2.60.28.1.1.51.1.8
wwpLeosVplsVirtualSwitchEthEvplMemberRxBytesHi
1.3.6.1.4.1.6141.2.60.28.1.1.35.1.1
MIB Reference
009-3220-011 Standard Revision A
August 2013
Statistics 69-53
Object
OID
wwpLeosVplsVirtualSwitchEthEvplMemberRxBytesLo
1.3.6.1.4.1.6141.2.60.28.1.1.35.1.2
wwpLeosVplsVirtualSwitchEthMemberRxBytesHi
1.3.6.1.4.1.6141.2.60.28.1.1.28.1.1
wwpLeosVplsVirtualSwitchEthMemberRxBytesLo
1.3.6.1.4.1.6141.2.60.28.1.1.28.1.2
wwpLeosVplsVirtualSwitchMplsEvplMemberRxBytesHi
1.3.6.1.4.1.6141.2.60.28.1.1.33.1.1
wwpLeosVplsVirtualSwitchMplsEvplMemberRxBytesLo
1.3.6.1.4.1.6141.2.60.28.1.1.33.1.2
wwpLeosVplsVirtualSwitchMplsMemberRxBytesHi
1.3.6.1.4.1.6141.2.60.28.1.1.22.1.1
wwpLeosVplsVirtualSwitchMplsMemberRxBytesLo
1.3.6.1.4.1.6141.2.60.28.1.1.22.1.2
wwpLesoCfmRxInvalidEtypeDropped
1.3.6.1.4.1.6141.2.60.35.1.1.25.13
MIB Reference
009-3220-011 Standard Revision A
August 2013
69-54 Statistics
MIB Reference
009-3220-011 Standard Revision A
August 2013