Documente Academic
Documente Profesional
Documente Cultură
By
SAINATH
ADVISORY COMMITTEE
DHARWAD
November 2009
(D. S. UPPAR)
CHAIRMAN
Approved by :
Chairman :
(D. S. UPPAR)
Members :
1.
(V. S. PATIL)
2.
(V. K. DESHPANDE)
3.
(RAVI HUNJE)
CONTENTS
Sl. No.
Chapter Particulars
CERTIFICATE
ACKNOWLEDGEMENT
LIST OF TABLES
LIST OF FIGURES
LIST OF PLATES
1.
INTRODUCTION
2.
REVIEW OF LITERATURE
2.1 Influence of spacing on growth, flowering, seed yield and quality
2.2 Influence of NPK on plant growth, flowering, seed yield and
quality
2.3 Influence of growth regulators on plant growth, flowering, seed
yield and quality
2.4
EXPERIMENTAL RESULTS
4.1 Effect of different spacing and fertilizer levels on seed yield and
quality in annual chrysanthemum
4.2 Effect of growth regulators on seed yield and quality in annual
chrysanthemum
5.
DISCUSSION
5.1 Effect of different spacing and fertilizer levels on seed yield and
quality in annual chrysanthemum
5.2 Influence of fertilizer
5.3
LIST OF TABLES
Table
No.
Title
1.
2.
Monthly meteorological data during crop growth period (2008-09) and the
average of 58 years (1950-2008) at Main Agricultural Research Station, UAS,
Dharwad
3.
Prices of inputs
4.
Effect of spacing and fertilizer levels on plant height (cm) at different growth
stages of annual chrysanthemum
Effect of spacing and fertilizer levels on number of branches at different growth
stages of annual chrysanthemum
Effect of spacing and fertilizer levels on number of leaves at different growth
stages of annual chrysanthemum
Effect of spacing and fertilizer levels on leaf area (cm2)/plant at different stages
of annual chrysanthemum
Effect of spacing and fertilizer levels on days to 50% flowering and number of
flowers/plant in annual chrysanthemum
5.
6.
7.
8.
9.
Effect of spacing and fertilizer levels on diameter (cm) of flower and number of
seeds/flower in annual chrysanthemum
10.
Effect of spacing and fertilizer levels on flower dry weight (g), seed yield
(g/plant) and seed yield (kg/ha) in annual chrysanthemum
11.
Effect of spacing and fertilizer levels on 1000 seed weight (g), germination (%),
seedling length (cm) in annual chrysanthemum
12.
Effect of spacing and fertilizer levels on seedling dry weight (mg), seedling
-1
vigour index and electrical conductivity of seed leachate (dSm ) in annual
chrysanthemum
13.
14.
15.
Effect of growth regulators on number of leaves /plant and leaf area (cm2) at
different growth stages of annual chrysanthemum
16.
17.
Effect of growth regulators on flower dry weight (g), seed yield (g/plant) and
seed yield (kg/ha) in annual chrysanthemum
18.
Effect of growth regulators on 1000 seed weight (g), germination (%) and
seedling length (cm) in annual chrysanthemum
19.
Effect of growth regulators on seedling dry weight (mg), seedling vigour index,
-1
and electrical conductivity of seed leachate (dSm ) in annual chrysanthemum
20.
LIST OF FIGURES
Figure
No.
Title
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
LIST OF PLATES
Plate
No.
Title
1.
2.
3.
plant
height
in annual
1. INTRODUCTION
Chrysanthemum is a member of family Asteraceae. There are about 160 species of
chrysanthemum among which the modern autumn flowering perennial (Chrysanthemum
morifolium) is most common, usually propagated through suckers (mums) followed by annual
chrysanthemums which are propagated through seeds. Annual chrysanthemum comprise of
three species viz., Chrysanthemum segtum (corn marigold), Chrysanthemum carinatum (tricoloured chrysanthemum) and Chrysanthemum coronarium (crown daisy or garland
chrysanthemum). The crown daisy or Garland chrysanthemum (C. coronarium) is a native to
Southern Europe, is a branching annual with finely cut foliage reaching a height up to a metre,
size of flowers varies from 2.5 to 4 cm and colour is usually in shades of yellow and white with
cream zone at the center (Vishnu Swarup, 1967).
It is a fast growing winter blooming annual. In North India, it is one of the cheapest
sources of floral material for worship and garland particularly in early summer months when
flowers are inadequate in supply. Apart from this, it is used in potted plants, vases, flower
decoration, preparation of bouquets and as border in the garden. Its leaves are steamed or
boiled and used as greens, especially in chinese cuisine, yellow and white chrysanthemum
flowers are boiled to make a sweet drink in some parts of Asia known as chrysanthemum tea
has many medicinal uses, bioactive terpenes such as dihydro chrysanoride and cumambrin,
contents of essential oil proven to have medicinal effect on cancer and blood pressure
reduction. It is an economically important as a natural source of insecticide, the flowers are
pulverized and an active component called pyrethrin is extracted and used in insecticidal
preparation and it is a good companion plant, protecting neighbouring plants from caterpillars.
In recent years, it has been introduced as a valuable source of feed for animals.
Chrysanthemum plants have also been shown to reduce indoor air pollution by the National
Aeronautics and Space Administration (NASA) clean air study.
Therefore, the growing popularity of annual chrysanthemum has lead to its cultivation
as a commercial crop. In Karnataka, the area under chrysanthemums during 2003-04 was
2964 hectares with an annual production of 36,294 tonnes and productivity of 10 tonnes per
hectare generating a value of 3,931 lakh rupees (Anonymous, 2004). The area under annual
chrysanthemum is increasing year after year and farmers are not getting quality seeds in
adequate quantities as very few farmers are taking up seed production. Hence, there is a
need to produce adequate quantity of quality seeds of annual chrysanthemum.
In the absence of scientific information with regard to appropriate nutrient schedule
involving nitrogen, phosphorus and potassium for a particular zone, it is difficult to reckon and
realize the objective of higher flower and seed yield in annual chrysanthemum. Further, there
is no comprehensive agronomic package for seed production to obtain higher seed yield and
quality in annual chrysanthemum. This objective can be achieved through balanced and
judicious application of plant nutrients and adopting proper spacing for plant growth
(Shivakumar, 2000). As there is no recommendation of spacing and fertilizer doses for seed
production, there is a need to standardize the optimum spacing and dose of fertilizers.
The pre flowering application of growth regulators not only improve the quality and
number of flowers produced but also increase the seed yield mainly by increasing the number
of seeds in china aster (Doddagoudar, 2000).
In the recent years the growth regulators play a major role in overcoming the factors
limiting the yield and quality for obtaining maximum benefit from seed production. It is realized
that the exogenous application of growth regulators stimulate flowering, pollination,
fertilization and seed setting to yield better quality seeds (Sunitha, 2006). Yet, the information
on the effect of growth regulators in realizing higher yield and quality in annual
chrysanthemum is very meagre.
Considering the importance of commercial flower production, the present
investigation was initiated with an objective to develop suitable agro-techniques for seed
production in annual chrysanthemum with the following objectives.
i.
To study the effect of different spacing and fertilizer levels on growth, yield and
seed quality attributes in annual chrysanthemum.
ii.
To study the effect of different growth regulators on growth, yield and seed
quality attributes in annual chrysanthemum.
iii.
2. REVIEW OF LITERATURE
Cultivation of annual chrysanthemum has received more attention only in recent
years and information available on the effect of spacing, fertilizer levels and growth regulators
on seed yield and quality in annual chrysanthemum is meagre. Hence reviews on these
aspects in annual chrysanthemum and other closely related flowers, ornamental plants and
vegetable crops have been included and presented in this chapter.
2.1
Spacing plays a role in manipulating the micro climate and hence helps in enhancing
the seed yield and quality of crop. Proper spacing improves the availability of nutrients,
aeration and light intensity (Ravindran et al., 1986) which means better crop growth and
response to the inputs and there by enhanced seed yield and quality.
2.1.1 Growth
Dongre (1984) noticed increased plant height (110.53 cm) and less number of
branches per plant (2.30) with closer spacing of 30x20 cm, while decreased plant height
(90.59 cm) and more number of branches per plant (5.02) were observed with wider spacing
of 50x20 cm in marigold.
Mokashi (1988) recorded maximum plant height (77.36 cm) with closer spacing of
30x20 cm, while minimum plant height (72.42 cm) was observed with wider spacing of 40x30
cm in gaillardia.
Vijay Kumar (1988) reported increased plant height (42.33 cm) with closer spacing of
30x10 cm, where as decreased plant height (31.59 cm) was noticed in wider spacing of 30x30
cm in china aster.
In chrysanthemum, increased plant height (51.96 cm) and less number of branches
per plant (28.96) were noticed with closer spacing of 30x20 cm, while wider spacing of 40x30
cm recorded decreased plant height (48.33 cm) and more number of branches (32.83) per
plant (Shivanna, 1994).
In marigold significant increase in plant height (62.87 cm), number of main branches
(6.05) and secondary branches (33.91) were observed with wider spacing of 30x30 cm,
whereas decreased plant height (54.71 cm), less number of main branches (5.55) and
secondary (22.15) branches were observed with closer spacing of 30x20 cm (Janakiram and
Rao., 1995).
Belgoankar et al. (1996) reported increased plant height (109.60 cm), number of
primary branches (31.62) and secondary branches (169.47) per plant with closer spacing of
45x45 cm, compared to wider spacing of 60x45 cm which recorded decreased plant height
(106.69 cm), number of primary branches (30.35) and secondary branches (166.45) per plant
in annual chrysanthemum.
Singh (1996) noticed increased plant height (36.24 cm) and more number of leaves
per plant (36.22) with wider spacing of 25 x 20 cm compared to closer spacing of 20 x 10 cm
which recorded (31.58 cm and 29.74, respectively) in tuberose.
Hugar (1997) reported that closer spacing of 30 x 10 cm recorded taller plants (34.29
cm) with less number of branches per plant (13.62), while wider spacing (30 x 30 cm) resulted
in shorter plants (32.28 cm) with more number of branches (14.92) per plant in gaillardia.
Mishra (1998) recorded taller plants (77.33 cm) with closer spacing of 30 x 20 cm,
while more plant spread (34.92 cm) was noticed with wider spacing of 40 x 30 cm in
gaillardia.
Shivakumar (2000) noticed significant increase in plant height (101.3 cm) and less
number of branches (9.9) with closer spacing of 30 x 30 cm, while shorter plants (89.7 cm)
and more number of branches (16.8) with wider spacing of 60 x 45 cm in marigold.
Karavadia and Dhaduk (2002) recorded that closer spacing of 30 x 20 cm gave taller
plants (88.58 cm) with less number of branches per plant (23.58) compared to wider spacing
of 40 x 30 cm (73.42 cm and 32.50, respectively) in annual chrysanthemum cv. Local White.
In zinnia, significant increase in plant height (52.64 cm), plant spread (34.83 cm) and number
of branches per plant (10.56) was observed with wider spacing of 40 x 30 cm, whereas
decreased plant height (47.74 cm), plant spread (31.02 cm) and number of branches per
plant (8.66) with closer spacing of 30 x 20 cm (Poonam et al., 2002).
Srivastava et al. (2002) in marigold cv. Pusa Narangi Gainda noticed increased plant
height (59.89 cm) and less number of secondary branches per plant (35.70) with closer
spacing of 40 x 40 cm, while shorter plant height (57.73 cm) and more number of secondary
branches (39.46) per plant with wider spacing of 60 x 40 cm.
Balanchandra et al. (2004) noticed increased plant height (74.60 cm) and less
number of branches per plant (14.40) with closer spacing of 30 x 30 cm, whereas wider
spacing of 45 x 45 cm recorded decreased plant height and more number of branches per
plant (70.40 cm and 19.60, respectively) in ageratum.
Karuppaiah and Krishna (2005) recorded significant increase in plant height (64.12
cm), more number of primary branches (25.40) and secondary branches (47.02) per plant
with wider spacing of 40 x 30 cm compared to closer spacing of 20 x 30 cm (59.85 cm 21.27
and 38.35, respectively) in French marigold Cv. Red Brocade.
Shah et al. (2005) reported higher plant spread (32.00 cm) with wider spacing of 30 x
35 cm compared to closer spacing of 30 x 25 cm (31.16 cm) in china aster.
Mane et al. (2006) observed tallest plants (47.36 cm) with closer spacing of 20 x 15
cm compared to wider spacing of 20 x 25 cm (44.95 cm) in tuberose cv. Single.
Anju and Pandey (2007) reported maximum number of branches per plant, number of
leaves per branch, diameter of stem and canopy of plant with wider spacing (40x30 cm), while
plant height was highest in closer spacing (20x10 cm) in African marigold.
Chaudhary et al. (2007) in zinnia concluded that plants spaced at 30x45 cm spacing
recorded increased plant height, number of branches per plant, length of the branches,
internodal length and number of nodes per plant. Similarly, Dhatt and Ramesh Kumar (2007)
noticed decreased plant height (81.64 cm), increased plant spread (80.06 cm) and number of
branches (20.01) per plant with wider spacing of 60x60 cm, compared to closer spacing of
60x30 cm which recorded more plant height, less plant spread and number of branches
(85.44 cm, 73.82 and17.47, respectively) in Coreopsis lanceolata
Ramachandrudu and Thangam (2007) recorded increased plant height (66.10 cm)
and number of leaves per plant (9.87) with closer spacing of 30x10 cm whereas decreased
plant height (56.83 cm) and number of leaves (9.73) per plant with wider spacing of 45x20 cm
in gladiolus.
Dalvi et al. (2008) noticed decreased plant height (120.21 cm), increased number of
leaves (10.34), leaf length (59.72 cm) and leaf breadth (2.66 cm) with the spacing of 30x20
cm in gladiolus, whereas wider spacing of 25x30 cm recorded 120.15 cm, 10.22, 59.25 cm
and 2.51, respectively.
Srikanth et al. (2008) recorded decreased plant height (56.45 cm), more number of
branches (7.00) and dry matter production (42.97 g) per plant with wider spacing of 60x15 cm
whereas closer spacing of 45x15 cm recorded (56.45 cm, 6.65 and 16.47 g respectively) in
lablab bean.
days) and more number of flowers per plant (62.69) with wider spacing of 30 x 40 cm. While
more flower yield (148.98 q) with closer spacing of 30 x 30 cm in French marigold.
Mane et al. (2006) observed wider spacing of 20 x 25 cm took maximum number of
days required for sprouting (11.39 days) compared to closer spacing of 20 x 15 cm (9.50
days) in tuberose Cv. Single.
Dhatt and Ramesh kumar (2007) observed early flower initiation (125.14 days) and
2
maximum yield (84.51 g/m ) with closer spacing of 60x30 cm in Coreopsis lanceolata
compared to wider spacing of 60x60 cm recorded (125.36 days and 62.71, respectively).
Whereas, Ramachandrudu and Thangam (2007) recorded delayed opening of first floret
(60.00 days), increased number of florets per spike (11.93), floret diameter (11.13 cm), spike
girth (2.83 cm), corm diameter (4.57 cm) and corm weight (30.40 g) with wider spacing of
45x20 cm in gladiolus.
Aliyu et al. (2008) recorded optimum yield of onion bulbs (30.83 t/ha) from 15 cm intra
row spacing combined with 100 kg N per ha in onion. He further reported that application of
150 kg N per ha in plants spaced at 25 cm in the row spacing and 20 cm inter row spacing
resulted in large bulbs. Whereas, Channabasavanna et al. (2008) recorded higher seed yield
(566 q/ha) with closer row spacing of 30 cm compared to wider spacing of 60 cm (515 kg/ha)
in ajowan.
Dalvi et al. (2008) recorded increased number of florets per spike (15.43), yield of
spikes per plot (54.66 kg), yield of corms per plot (55.28 kg) and decreased number of
cormels per plant (52.38) with the closer spacing of 30x30 cm in gladiolus.
Dhatt and Ramesh (2008) in Gaillardia aristata reported that the plants spaced at
60x60 cm took 123.31 days to anthesis and showed longest flowering duration (86.87 days).
He further reported that wider spacing of 60x60 cm resulted in highest seed yield (106.75
g/m2) followed by closer spacing of 60x30 cm (99.85g/m2).
Mantur and Sateesh (2008) reported significant increase in average fruit weight
(72.50 g), fruit yield (3.67 kg/ per plant) and fruit yield (7.94 kg/m2) under wider spacing of
60x60 cm in tomato, while maximum fruit yield (8.64 kg/m2) was noticed in closer spacing of
60x30 cm.
Pourhadian and Khajehpour (2008) recorded highest seed yield (3039 kg/ha) with 20
cm row distance compared to 40 cm (1930 kg/ha) which gave lowest seed yield in safflower.
Srikanth et al. (2008) reported less number of days for flower initiation (42.54), days
to 50 per cent flowering (45.10), days to pod initiation (48.01), days to crop maturity (80.15)
and increased pod yield (20.44 q/ ha) and seed yield (17.20 q/ ha) with closer spacing of
45x15 cm in lab lab bean compared to wider spacing (42.97, 45.56, 48.33, 81.35, 17.25 q/ha
and 15.02 q, respectively). The harvest index (42.14), number of pods per plant (19.06), pod
yield per plant (21.42 kg) and seed yield per plant (16.92 g) were also more in wider spacing
of 60x15 cm.
length (14.70 cm) and root length (14.10 cm) compared to plant population of 1,66,666 plants
per hectare (2.88 g, 81.00%, 75.00%, 1776.90, 42 mg, 11.80 cm and 10.00 cm, respectively)
in sunflower.
Balachandra et al. (2004) reported higher germination (65.70%) due to wider spacing
of 45 x 45 cm compared to closer spacing of 30 x 30 cm (63.70%) in ageratum.
2.2
2.2.2 Growth
Maheshwar (1977) observed increased plant height in china aster with the application
of nitrogen up to 180 kg and phosphorus 120 kg per ha. Similarly, Ramachandra (1982)
obtained maximum plant height with 120:60:60 kg NPK per ha. While, Venkatesh (1983)
recorded maximum plant height with 100:60:60 kg NPK per ha. Whereas, significantly
maximum plant height was recorded at 250:120:75 kg NPK per ha (Mantur, 1988) and at
200:100:50 kg NPK per ha by Ravindra (1998) in china aster.
In china aster, Ramachandra (1982) noticed maximum plant height (40.0 cm),
number of branches (10.5), leaf area index (0.57) and dry matter production (18.67), with
application of 120:60:60 kg NPK per ha. Similar results were also observed in eight varieties
of marigold by Nalwadi (1982) with the application of higher doses of fertilizer (225 kg N, 120
kg P2O5 and 60 kg K2O per ha).
Venkatesh (1983) observed that china aster plants receiving nitrogen, phosphorus
and potassium at the rate of 120:60:60 kg per ha recorded higher plant height (60.4 cm) and
number of branches per plant (22.4) compared to control.
Dongre (1984) in marigold indicated that, application of nitrogen and phosphorus
each at 40 g per square metre recorded higher plant height (128.8 cm) and maximum number
of branches per plant (4.05).
Jayanthi and Gowda (1988) observed significant increase in plant height (47.9 cm)
and number of branches per plant (7.30) in chrysanthemum with the application of
300:400:200 kg NPK per ha.
Mantur (1988) found that application of 240 kg N, 120 kg P2O5 and 75 kg K2O per ha
recorded maximum plant height, number of branches, dry matter production and higher leaf
area index in china aster. While, Mokashi (1988) reported that plant height and number of
branches per plant did not respond well to the application of higher doses of nitrogen (150 to
250 kg/ha) and phosphorus (80 to 120 kg/ha) in gaillardia.
In marigold, Arulmozhiyan and Pappaiah (1989) found significant increase in plant
height and number of branches per plant with the application of 120 kg N and 90 kg P2O5 per
ha. Similarly, Yassin and Pappiah (1990) stated that application of 75 kg nitrogen per ha
along with sheep manure recorded maximum plant height (72.6 cm) and more number of
branches per plant (23.7) in chrysanthemum.
Jana and Pal (1991) reported in cosmos, that among the nutrient elements nitrogen
and phosphorus deficiency showed maximum reduction in growth. Maximum growth of plants
were obtained with combined application of 20 g nitrogen, 10 g phosphorus and 10 g potash
per square metre.
In calendula, application of NPK at the rate of 100:50:25 kg per ha increased the
height of plant, number of branches and leaves per plant (Sigedar et al., 1991). Similarly, Rao
et al. (1992) noticed increase in number of lateral branches per plant with higher level of
nitrogen (200 kg/ha) in chrysanthemum.
Ramesh kumar and Kiranjeet Kaur (1996) in balsam found increased number of
secondary branches per plant and plant height with the application of nitrogen and
phosphorus respectively with 20 and 10 grams per square metre. Similarly, Baboo and
Sharma (1997) in chrysanthemum indicated that plants receiving 300:200:120 kg NPK per ha
recorded maximum plant height and more number of branches.
Hugar (1997) reported increased plant height (43.0 and 39.3 cm), leaf area index
(4.83 and 4.62) and dry matter production (29.92 and 28.12 g) with the application of 75 kg N
per ha in rabi and summer, respectively. Whereas, increase in number of branches (34.7 and
34.2) and leaves (343 and 327) was recorded at 100 kg N per ha in rabi and summer
respectively in gaillardia.
De and Dhimon (1998) reported maximum plant height (65 cm) with combined
application of 200 kg N and 400 kg K2O per ha when compared to control (33 cm) in
chrysanthemum. Similarly, in gaillardia the application of 30 g of nitrogen per square metre
recorded significantly maximum plant height of 80.8 cm over the lower doses of nitrogen
(Mishra, 1998).
Ravindra (1998) reported that all the growth parameters like plant height, number of
leaves, stem diameter etc., were influenced by nitrogen and phosphorus application, but the
effect of potassium was minimum in china aster.
Agarwal et al. (2002) obtained significantly maximum plant height (69.6 cm) and
number of branches (21.9) with application of 200 kg N per ha, compared to control (52.5 cm
and 12.8 respectively) in marigold.
Doddagoudar (2002) reported maximum plant height (47.3 cm), number of branches
(9.13) and leaves (42.7) per plant and maximum dry weight (34.25 g) with application of
240:180:80 kg NPK per ha in china aster.
Karavadia and Dhaduk (2002) observed significantly increased plant height (97.89
cm) and number of branches (34.00) per plant with the application of higher dose of nitrogen
(150 kg/ha) in annual chrysanthemum.
Kumar et al. (2003) reported that plant height (34.80 cm) and number of branches
(4.43) increased significantly with nitrogen of 300 kg per ha as compared to 26.34 cm plant
height and 3.3 branches in control without any nitrogen application. Similarly, phosphorus
increased the plant height and number of branches, wherein plants receiving higher dose of
phosphorus in china aster.
Acharya and Dashora (2004) reported that application of 200 kg per ha each of
nitrogen and phosphorus produced maximum plant height (95.92 cm), plant spread (49.31
cm) and branches (14.2) when compared to other levels of nitrogen, phosphorus and control
in African marigold. Similarly, Saud and Ramachandra (2004) reported that higher dose of
fertilizer (150:150:150 kg NPK/ha) resulted in maximum number of primary and secondary
branches in French marigold.
Gnyandev (2006) reported increased plant height (49.52 cm), number of branches
(11.66) and leaves (40.61) per plant with the application of higher dose of fertilizer
(270:180:150 kg NPK/ha) in china aster.
Ajay and Vijay (2007) recorded significant increase in number of leaves per plant
(36.71), number of branches per plant (11.24) with the application of higher dose of nitrogen
(100 kg) in calendula compared to control (27.17 and 9.54, respectively).
Gaurav and Prabhakar (2007) noticed increased number of corms per plant (1.75),
number of cormels per plant (19.66) with higher fertilizer level (50:25:25 NPK kg/ha) in
gladiolus cv. White Friendship.
Channabasavanna et al. (2008) reported in ajowan maximum seed yield per ha (477
kg) with the application of 60:30:30 kg NPK per ha in ajowan.
Srikanth et al. (2008) recorded increased plant height (58.10 cm), number of
branches (7.90), dry matter production (18.96 g) per plant with the application of higher dose
of 33:67:33 kg NPK per ha in lablab bean.
2.2.3
Venkatesh (1983) recorded significantly higher number of flowers in china aster with
the application of 100:60:60 kg NPK per ha and he could not observe any influence of
fertilizers on flower diameter, however he obtained increased dry weight of flowers only with
potash levels.
Dongre (1984) reported that application of 40 g of N and 40 g of P2O5 per square
metre gave maximum number of flowers per plant and seed yield per plant in marigold.
Jayanthi and Gowda (1988) in chrysanthemum reported that flower diameter and
flower yield were increased significantly with the application of 300:400:200 kg NPK/ha.
While, Mantur (1988) obtained higher number of flowers per plant (36.85), flower yield (83.92
g/plant), large size flowers (5.78 cm) and higher seed yield per plant (6.72 g) with the
application of 180:120:100 kg NPK per ha in china aster.
According to Anuradha et al. (1990) the number of days taken to 50 per cent
flowering was reduced with increased levels of N and P2O5 (each from 0 to 90 kg N and
P2O5/ha) in marigold.
On the contrary, Sharanabasappa (1990) reported that application of higher dose of
N and P2O5 at 150 and 100 kg per ha, respectively delayed days to first flowering by 6 days
and 50 per cent flowering by 7.37 days over the control in everlasting flower.
Jana and Pal (1991) reported that nitrogen and phosphorus treatment showed
maximum reduction in flowers and seed yield in cosmos and maximum flowers and seed yield
obtained with combined application of 20 g N, 10 g P and 10 g K per m2.
Yadav and Bose (1993) stated that application of 300:100 kg N and P2O5 per ha
significantly increased the seed yield in marigold but further increase in nitrogen (400 kg) and
phosphorus (400 kg) levels reduced the seed yield. While, in gaillardia, the application of 75
kg nitrogen per ha significantly increased the number of flowers per plant, ten flower weight
and seed yield except breadth of flower (Hugar, 1997). He further reported that the increase
in N level to 125 kg per ha did not affect the flower and seed yield as compared to 75 kg per
ha.
De and Dhimon (1998) reported in chrysanthemum that number of flowers per plant
were maximum (32) with the combination of 600 kg N and 200 kg K2O per ha followed by 400
kg N and 200 kg K2O per ha.
Ravindra (1998) reported in china aster, that the time taken for flowering increased
with the application of nitrogen. While, phosphorus reduced the time taken for flowering.
Flowering duration was increased with increased nitrogen and phosphorus application. While,
potassium had no influence on both flowering time and duration of flowering. The flower yield
was maximum with the application of 200:100:100 kg NPK per ha.
Rupinder Kaur and Ramesh Kumar (1998) noticed that the number of flowers per
plant (65.42) and seed yield per plant (0.59 g) were significantly influenced by the application
of N and P and was maximum in 30 g of N and 20 g of P2O5 per square metre in pansy.
Whereas, Yadav et al. (1998) concluded that application of 80 kg nitrogen per ha significantly
increased the diameter of head, 1000 seed weight and seed yield over 40 and 60 kg N per ha
in sunflower.
According to Shivakumar (2000), application of 315:84:84 kg NPK per ha significantly
increased the number of capitula harvested per plant (25.2), number of seeds per capitula
(216), seed yield per plant (7.88 g) and per ha (437 kg). 1000 seed weight did not differ
significantly although it was higher in higher fertilizer level (315:84:84 kg NPK/ha) in marigold.
Singh and Sangama (2000) reported in china aster, significant increase in length of
flower stalk (27.27 cm) and number of flowers per plant (35.22) with higher levels of N (300
kg/ha), but the number of days taken for 100 per cent flowering, diameter of flower and weight
of 5 flowers were not significantly influenced by graded levels of nitrogen.
Doddagoudar (2002) recorded more number of capitula per plant (24.2), higher
weight of capitula (1.77 g), larger diameter of capitula (5.10 cm), higher seed weight per
capitula (0.33 g), filled seed weight per capitula (0.26 g), filled seed percentage (78.7), 1000
seed weight (1.86 g) and harvest index (16.5) with the application of 240:180:80 kg NPK per
ha in china aster.
Significantly higher flower yield (35786.92 kg/ha) was recorded with the application of
higher nitrogen level (150 kg/ha) in annual chrysanthemum (Karavadia and Dhaduk, 2002).
While, Mohanty et al. (2002) noticed in marigold that the days required for flowering was
prolonged from 68.03 days in (control) to 71.29 days with application of nitrogen (30 g/m2).
Further, more number of flowers and highest yield of flower was obtained with 30 g N per sq.
m.
Kumar et al. (2003) reported in china aster maximum number of flowers per plant
(35.22), flower diameter (5.13 cm) and flowering duration (37.45 days) with higher dose of
nitrogen 300 kg per ha followed by 250 kg per ha and plants receiving higher dose of
phosphorus took less time to produce first flower bud (54.05 days) as compared to other
levels of fertilizer.
Maximum flower production in chrysanthemum cv. Jayanthi could be assured with the
application of 20 g N and 16 g K per plot. It may be more advantageous when
chrysanthemum plants were pinched at 20 days after transplanting (Singh and Baboo, 2003).
Singh and Baboo (2003) reported in marigold that application nitrogen 375 kg per ha
gave highest flower yield (329.7 q/ha). Such boosting effect might be due to higher
accumulation of carbohydrates in flower heads and increased flower size plants which
received higher dose of phosphorus took less time to first flower appearance (50.2 days) as
compared to control (58.2 days). The higher dose of P (210 kg/ha) also produced maximum
flower yield (317.21 q/ha) than lower levels of phosphorus and control.
Acharya and Dashora (2004) reported in African marigold that application of 200 kg of
N and P fertilizers per ha recorded increased diameter of flower, number of flowers per plant
and flower yield per plant and per ha when compared to other levels of N and P.
Gnyandev (2006) noticed more number of days to 50 per cent flowering (90.26),
increased number of flowers per plant (32.15), flower diameter (5.09 cm), number of seeds
per flower (68.73), seed yield per plant (4.75 g) and seed yield per ha (342.23 kg) with the
application of higher fertilizer level (270:180:150 kg NPK/ha) in china aster.
Ajay and Vijay (2007) noticed longer days for bud initiation (54.30), days to first bud
opening (76.00) and increased flower diameter (5.08 cm), number of flowers per plant
(93.17), flower yield (850.17 g/m2) and flower yield (85.01 q/ ha) with the application of higher
dose of nitrogen (100 kg/ha) in calendula.
Ramesh Naik et al. (2008) stated that the application of higher dose of fertilizer, 150
percent of RDF resulted in significant increase in number of capitula per plant (46.66), seed
weight per plant (55.06 g), seed yield per ha (13.70 q) and stalk yield (23.63 q/ha) in
safflower.
Singh et al. (2008) reported maximum flower bud diameter (2.91 cm), flower width
(4.73 cm), number of bulbs per plant (1.49), weight of bulbs per plant (68.73 g), bulb diameter
(5.37 cm), number of bulblets per plant (1.87) and weight of bulblets (2.50 g) with the
application of higher dose of nitrogen 250 kg per ha in Asiatic hybrid lily cv. Novecento.
Srikanth et al. (2008) recorded longer days to flower initiation (45.45), days to 50 per
cent flowering (48.36), days to pod initiation (51.00), days to crop maturity (84.75), and
increased harvest index (43.56), number of pods per plant (22.50), pod yield per plant (23.68
g), pod yield per ha (22.23 q), seed yield per plant (19.95 g) and seed yield per ha (18.50 q) in
lablab bean with the application of higher levels of fertilizer 33:67:33 kg NPK per ha.
Manjunatha et al. (2008) recorded significant increase in number of fruits per vine
(2.18), number of seeds per fruit (384), seed yield per fruit (36.40 g), seed yield per vine
(81.11 g), seed yield per plot (1603.0 g) and seed yield per ha (471 kg) with higher dose of
fertilizer 150:60:60 kg NPK per ha in pumpkin cv. Arka Chandan.
2.3
2.3.2
Growth
Spraying of GA3 at 200 ppm recorded maximum plant height (46.39 and 58.93 cm)
and more number of branches (14.13 and 13.77) compared to control (36.90 and 37.90 cm
and 6.06 and 6.80, respectively) in marigold and china aster (Lal and Mishra, 1986). Similarly,
spraying of GA3 at 200 ppm recorded maximum height and more number of branches
compared to control in chrysanthemum (Nagarjuna et al., 1988).
Syamal et al. (1990) noticed maximum height, number of leaves and number of
branches in the plants treated with GA3 at 200 ppm as compared to control in marigold and
china aster.
GA3 at 100 ppm resulted in maximum plant height (53.87 cm) and more number of
leaves per plant (6.33) compared to control (44.90 cm and 4.67, respectively) in gladiolus
(Leena Ravidas et al., 1992). Similarly, Das and Das (1992) observed significant increase in
plant height (69.30 cm) and number of leaves (26.00) compared to control (45 cm and 18,
respectively) with 200 ppm of GA3 spray in Hemerocallis aurantiaca (Day lily).
Goyal and Gupta (1996) observed increased plant height (91.63 cm) and more
number of shoots per plant (14.62) in rose with GA3 at 45 ppm spray compared to control
(60.37 cm and 10.50, respectively).
Singh and Bijimol (2001) observed an increase in plant height (35.15 cm) and more
number of leaves per plant (32.83) in tuberose with GA3 at 200 ppm compared to control
(21.87 cm and 18.91, respectively).
Maurya and Nagada (2002) noticed maximum height (104.50 cm) in the plants
treated with GA3 (100 ppm) as compared to control (95.10 cm) in gladiolus cv. Friendship.
GA3 (90 ppm) significantly increased the plant height (69.00 cm) and number of branches per
plant (6.60) compared to control (58.52 cm and 6.10, respectively) in dahlia (Khan and
Tewari, 2003).
Spraying of GA3 at 100 ppm recorded maximum plant spread (31.10 cm) and more
number of leaves (15.19) compared to control (20.00 cm and 11.23, respectively) in gerbera
(Sujatha et al., 2002). Similarly, Prabhat Kumar et al. (2003) noticed maximum height (62.00
cm) and number of branches per plant (20.27) in the plants treated with GA3 (200 ppm) as
compared to control (46.77 cm, and 16.57, respectively) in china aster cv. Kamini.
Lone et al. (2005) observed significant increase in plant height (99.42 cm) and more
number of branches per plant (14.96) with the spraying of GA3 (250 ppm) compared to control
(82.08 cm and 9.33, respectively) in chilli cv. K-2.
In gladiolus, Pranav Rana et al. (2005) revealed that GA3 100 ppm spray increased
plant height (119.88 cm) compared to control (115.68 cm). While, Chandrappa et al. (2006)
recorded maximum plant height (46.44 cm) with spraying of GA3 (750 ppm) compared to
control (45.22 cm) in anthurium cv. Royal Red.
Panwar et al. (2006) reported in tuberose that GA3 at 100 ppm resulted in more
number of leaves per plant and increased length of spike. Whereas, significant increase in
plant height (40.13 cm), number of leaves per plant (5.69), leaf length (18.11) and leaf width
(10.43 cm) in anthurium was recorded with foliar application of 500 ppm GA3. (Dhaduk et al.,
2007)
Kishan et al. (2007) recorded an increase in plant height (89.50 cm), and number of
branches per plant (8.75) in winter, (74.33 cm and 13.66) in summer with the application of
GA3 at 300 ppm in African marigold.
Significant increase in plant height at harvest (101.2 cm), number of branches per
plant (14.5) was recorded with foliar application of GA3 at 200 ppm in marigold (Sunitha,
2006). While, Umrao et al. (2007) reported maximum plant height (97.14 cm), number of
leaves per plant (10.02), leaf length (45.51 cm) and spike diameter (0.989 cm) with the
application of 30 mg per litre of GA3 in gladiolus.
Manjunath et al. (2008)
seeds per fruit (374), seed yield
per plot (1019.00 g) and seed
gibberellin compared to control
pumpkin cv. Arka Chandan.
Pawar et al. (2008) noticed significant increase in plant height (66.83 cm), plant
spread (2454.50 cm) with foliar application of 200 ppm of GA3 in gaillardia.
Sandeep et al. (2008) recorded increased plant height (22.07 cm), more number of
2
leaves per plant (30.60), number of branches per plant (14.24), leaf area (39.95 cm ) with the
application of GA3 at 200 ppm in Calendula officinalis cv. Red Orange.
Spraying of GA3 at 150 ppm recorded more number of flowers per plant (18.63) and
diameter of flower head (7.53 cm) compared to control (13.79/plant and 6.93, respectively) in
gerbera (Sujatha et al., 2002). While, Khan and Tewari (2003) recorded more number of
flowers per plant (15.80) with GA3 at 90 ppm compared to control (13.37) in dahlia.
In China aster cv. Kamini, Prabhat Kumar et al. (2003) noticed that spraying of GA3
200 ppm gave maximum number of flowers per plant (67.33), flower weight (2.86 g) and
flower yield (192.59 g) compared to GA3 at 100 ppm (65.67, 2.81 g and 184.51 g.
respectively).
Pranav Rana et al. (2005) reported that spraying of GA3 at 100 ppm significantly
increased the number of florets per spike (14.29), number of corms per plant (1.66) and corm
weight (50.80 g) compared to control (12.87, 1.45 and 49.07 g, respectively) in gladiolus.
Baskaran and Misra (2007) observed early induction of flowering in gladiolus with the
application of 500 ppm GA3 followed by 100 ppm.
Dhaduk et al. (2007) in anthurium reported increased number of flowers per plant
(3.93), stalk length (8.53 cm) and spathe length (9.09 cm) with foliar application of 500 pppm
of GA3. Whereas, Devadanam et al. (2007) observed minimum number of days required for
spike emergence (43.48) maximum spike length (87.20 cm), spike girth (2.84 cm), rachis
length (21.37), floret length (6.56 cm) and floret diameter (3.88 cm) with foliar spray of GA3 at
150 ppm in tuberose.
Kishan Swaroop et al. (2007) recorded minimum days to bud initiation (70.75 cm),
days to first flowering (91.50),increased number of flowers per plant (23.25), fresh weight of
single flower (6.92 g), yield of flowers per plant (433 g), number of seed per flower (297.50)
and 247.00) and seed yield per plant (23.50 g) in winter and (80.66 cm, 103.66, 62.66, 6.06 g,
286.66 g and 1.22 g, respectively) in summer with the application of GA3 at 300 ppm in
African marigold.
Samruban and Karuppaiah et al. (2007) noticed early days to 50 per cent flowering
(82.60) and increased number of flowers per plant (25.51) and diameter (2.24 cm) with the
application of 50 ppm GA3 in French marigold. While, Sunitha et al. (2006) recorded
significantly less number of days to 50 per cent flowering (50.3), more number of flower
(68.7), seed yield per plant (20.6 g) and seed yield per ha (531 kg) with foliar application of
GA3 at 200 ppm in marigold.
Umrao et al. (2007) reported maximum corm diameter (5.28 cm) and weight per corm
(22.69 g) with the application of 300 mg per litre of GA3. Further, he reported 400 mg per litre
gave highest number of florets per spike (14.20) and number of corms (1.20) per plant.
2.3.4 Seed quality parameters
Shivaprasad Shetty (1995) noticed increased germination percentage (90.75) and
vigour index (660) in china aster by spraying of GA3 at 200 ppm compared to GA3 at 100 ppm
(87.50% and 552, respectively).
Doddagoudar et al. (2004) recorded maximum germination percentage (93.00), shoot
length (3.77 cm) root length (1.56 cm). Seedling vigour index (496) and seedling dry weight
(18.00 mg) with spraying of GA3 at 200 ppm compared to control (87.50%, 3.15cm, 1.27 cm,
388 and 12.80 mg, respectively) in china aster.
Spraying of GA3 200 ppm to bell pepper cv. California Wonder, recorded higher
germination percentage (91.05), root length (5.55 cm), shoot length (7.50 cm) seedling dry
weight (53.50 mg) and seedling vigour index (1174) compared to control (8 1.50%, 4.27 cm,
5.75 cm, 42.85 mg and 518, respectively) (Yogananda et al., 2004).
Sunitha (2006) recorded significantly higher seed quality parameters such as 1000
seed weight (3.3 g), germination percentage (90.1), root length (6.3 cm), shoot length (5.4
cm), seedling dry weight (11.4 mg), vigour index (1059) and field emergence (77.1 %) with
foliar application of GA3 at 200 ppm in marigold.
In ridge gourd, Hilli et al. (2008) recorded increased 100 seed weight (13.88 g), seed
germination percentage (93.22) and field emergence percentage (83.95) vigour index (3026),
-1
seedling dry weight (83.55 mg) and lower electrical conductivity (0.801 dSm ) in summer
and (11.70 g, 87.37%, 84.00% 3026, 82.48 mg and 0.814, respectively) in kharif with foliar
application of 350 ppm of GA3.
Manjunatha et al. (2008) recorded increased 100 seed weight (8.72 g), seed
germination percentage (92.00) and field emergence percentage (87.40) with foliar
application of 25 ppm of gibberellin in pumpkin cv. Arka chandan.
2.4
2.4.1 Tricontanol
Tricontanol (TRIA), a 30-carbon primary alcohol, was first identified by Chibnall et al.
(1933) in lucerne as a natural component of plants, and verified this early by mass
spectroscopy. Later it was observed to increase the growth of plants following application as
side dressing. The plant growth regulating activity of TRIA extracted from alfalfa was first
discovered in 1977. TRIA is synthesized by plants and is a component of most biological
material. Exogenous application of TRIA regulates several physiological and biological
processes and is known to increase yield of crops (Stanley and Robert, 1983).
2.4.2 Growth
Pandita et al. (1991) noticed maximum plant height at harvest with two foliar sprays
of 1.25 ppm vipul (tricontanol 0.1%) in rainy season and three foliar sprays of 2.5 ppm in the
summer season in okra. While, Ray (1991) reported relative increase in growth rate, leaf area
and leaf area index with the application of tricontanol at 0.3 to 3.0 mg per litre compared to
control in capsicum.
Sharma (1995) noticed increased plant height and number of branches with foliar
spray of 2.5, 5.0, 7.5 and 10 ppm of miraculan over control in tomato.
Miniraj and Sanmugavelu (1987) in chilli recorded significantly more number of
branches (13.75), number of leaves (850.63) per plant with foliar application of 2 ppm of
tricontanol. While, Arvinda kumar et al. (2002) reported an increase in plant height and
number of branches with the foliar application of tricontanol 1ml/2l over control in mustard.
Shaikh et al. (2002) recorded increased plant height (84.26 cm), and number of
leaves per plant (42.11) with the foliar application of miraculan 2000 ppm over control (81.66
cm and 36.03, respectively) in onion cv. Nasik Red.
Dhall and Sanjeev (2004) recorded highest number of branches per plant (14.2) with
the application of 0.75 ml vipul per litre (tricontanol 0.1%) in tomato. Whereas, Karuppaiah et
al. (2007) in radish recorded increased plant height, number of branches and leaf area with
the application of 10 ppm of tricontanol.
Satao et al. (2007) reported increased plant height and number of leaves by spraying
four times (35, 50, 65 and 80 days) after sowing with 0.8 ml per litre of miraculan in okra.
Gaur et al. (1987) reported highest yield in safflower with application of miraculan at
500 ppm and 25 kg phosphorus per ha. Whereas, Parmil Singh et al. (1990) recorded
increased seed and oil yield in sunflower with the application of 2 mg per ml of tricontanol.
Significantly higher leaf yield was recorded with the application of tricontanol (2.5-10
ppm) compared to control in spinach. He further reported highest leaf yield was with 5 ppm of
tricontanol (Kadam et al., 1988).
Ray (1991) reported higher dry matter accumulation and better yields in plants
treated with 0.5 to 1.0 mg tricontanol in capsicum. While, Yadav et al. (1992) reported
increased pod yield with the application of 0.2 percent miraculan compared with that of
untreated control in pea.
Sharma (1995) reported increased number of fruits, yield of fruits and seed per ha
with the application of 2.5, 5.0, 7.5 and 10 ppm of miraculan compared to control. He further
reported that spraying at four weeks after transplanting with 75 pm was most effective in
enhancing fruit and seed yield per ha compared to 8 and 12 weeks after transplanting in
tomato.
Miniraj and Shanmugavelu (1997) in chilli recorded early days taken for first flowering
(70.9), increased number of flowers (499.1) per plant, single plant yield (80.25 g), yield per ha
(4.45 q) with foliar application of 2ppm of tricontanol.
Muralidharan et al. (2000) recorded significant number of fruits per plant (37),
individual fruit weight (41.6 g), fruit volume (32.6 cm3) and fruit firmness (1.79 mm) with the
application of vipul 0.01 % (tricontanol) 300 ml ha-1 in tomato.
Arvinda kumar et al. (2002) reported increased number of siliqua per plant, length of
siliqua, number of seeds per siliqua, 1000 seed weight and seed yield with the application of
1ml/l of tricontanol over control in mustard.
Muralidharan et al. (2002) reported higher pod yield with the application of 0.1%
miraculan and 0.05 % miraculan at 200, 250 and 300 ml per hectare over control. He further
recorded highest dry pod yield (3.22 t/ha) with 300 ml of miraculan 0.1% in chilli.
Shaikh et al. (2002) recorded minimum days to 50 per cent flowering (82.22),
increased number of umbels per plant (4.56), umbel diameter (4.28 cm), seed weight per
umbel (3.07 g), seed yield per plant (16.73 g) and seed yield per ha (12.69 q) with the
application of 2000 ppm miraculan in onion cv. Nasik Red. While, Dhall and Sanjeev (2004) in
tomato reported increased number of fruits per plant (94.67), early and total yield per plant
(0.480 and 3.2 kg) with the application of 0.75 ml vipul per litre (tricontanol 0.1%).
Sharma et al. (2005) reported tricontanol spray (1.25 ppm) at 15, 30 and 40 DAT
significantly increased number of flowers per plant (118.2), size of flowers (8.9 cm), weight of
flowers per plant (739.0 g) and flower yield per ha (36.5 q) in African marigold.
Karuppaiah et al. (2007) in his studies on growth regulators in radish reported
increased tuber length and tuber yield with the application of 10 ppm of tricontanol. Whereas,
Tripathi et al. (2007) recorded increased number of flowers per plant, percent pod setting per
plant, 1000 seed weight, seed yield per ha, harvest index and productivity with the application
of 5 ppm miraculan in chickpea over control.
Samui and Roy (2007) reported that application of tricontanol 0.05% EC and
tricontanol 0.1% EC at 0.250, 0.500 and 1.000 g a.i. per ha foliar spray significantly increased
dry matter production, tuber bulking rate, size of tubers and yield in potato.
Satao et al. (2007) reported an increase in number of flowers, number of pods and
green pod yield with the application of miraculan at 0.8 ml per litre sprayed four times (35, 50,
65 and 80 days) after sowing in okra.
2.5.1 Growth
Shanmugam and Muthuswamy (1974) reported marked suppression of plant growth
at all concentrations (500, 1000 and 2000 ppm) of CCC in chrysanthemum compared to
control.
Sen and Naik (1977) noticed marked reduction in plant height over control with foliar
spray of cycocel (1000 ppm) in both pinched and unpinched Chrysanthemum morifolium cv.
Early white.
Narayanagowda and Jayanthi (1991) reported in marigold that foliar spray of cycocel
successfully reduced the plant height at all concentrations (1000, 1500 and 2000 ppm),
increased the number of branches at pre blooming stage and post blooming stage in first and
second season, respectively.
Shreedhar (1993) in his studies on gaillardia noticed higher number of branches,
leaves and dry matter production and reduced plant height with CCC (2000 ppm) as
compared to CCC (3000 ppm).
Aswath et al. (1994) noticed decreased plant height, branch length and internodal
length with increase in concentrations of cycocel in china aster. Maximum number of
branches and leaves were recorded in CCC at 1500 ppm.
Spraying of CCC (1000 ppm) on gaillardia significantly increased the number of
branches, leaves, leaf area index and total dry matter production compared to control (Hugar,
1997).
Khandelwal et al. (2003) reported that spraying of 1000, 2000 and 3000 ppm of CCC
significantly reduced the plant height, but increased the number of branches and leaves at all
concentrations compared to control in African marigold. While, Singh (2004) reported that
CCC at 2000 ppm exhibited maximum number of leaves and secondary shoots and
significantly reduced plant height in rose.
Significant reduction in plant height, increased number of primary and secondary
branches, number of leaves per plant, leaf area and plant spread was recorded with foliar
spray of cycocel at 500 and 250 ppm in French marigold. Further, reported 500 ppm was
superior over all other treatments (Samruban and Karuppaiah, 2007).
Pawar et al. (2008) recorded reduction in plant height, increased number of branches
and plant spread with foliar application of cycocel at (750, 1000 and 1250 ppm, respectively)
in gaillardia cv. Picta Mixed.
2.5.2
Parmar and Singh (1983) in marigold noticed more flowers per plant and flower yield
with foliar spray of CCC at 500 and 750 ppm of spray respectively compared to control. While,
Narayanagouda (1985) reported in china aster that application of CCC (1000 ppm) increased
the number of days to 50 per cent flowering, number of flower per plant and flower yield
compared to control.
In china aster, maximum number of flowers per plant and yield of flowers per plant
was recorded with CCC at 2000 ppm. Whereas, minimum yield and maximum peduncle
length was recorded in control (Narayanagouda, 1985).
Aswath et al. (1994) reported that application of cycocel (1000 ppm) delayed the
flower bud appearance by 12.40 days. Higher number of flowers per plant was obtained due
to the spray of 1500 ppm cycocel followed by alar (1500 ppm) in china aster.
Narayangouda et al. (1996) reported that cycocel treated plants of Gundu Mallige
flowered early with longer duration of flowering and increase in number and flower yield
(120.59) per plant.
Hugar (1997) reported that spraying of CCC (1000 ppm) to gaillardia plants
significantly increased the days to 50 per cent flowering, number of flowers per plant, seed
yield per plant, seed recovery percentage, 1000 seed weight, but decreased capitulum
diameter compared to control.
Khandelwal et al. (2003) observed significantly increased number of flowers, number
of days to first flowering and decreased diameter of flowers with increasing concentration of
CCC (1000, 2000 and 3000 ppm) compared to control. Similarly, Singh (2004) reported in
rose that CCC (2000 ppm) recorded maximum diameter of flower, early induction of flower
bud and flowering compared to CCC (1000 ppm).
Significantly more number of flowers per plant (32.43 and 30.17 cm), increased
diameter of head (3.46 and 3.30 cm) and stalk length (8.2 and 8.28 cm) was recorded in
French marigold with foliar application of cycocel at 500 and 250 ppm (Samruban and
Karuppaiah, 2008).
Pawar et al. (2008) recorded significant increase in diameter of flower, highest
diameter and yield of flower per hectare with the application of cycocel at 750, 1000 and 1250
ppm, respectively. He further reported that 1000 ppm was significantly superior over all
treatments in gaillardia.
2.6.1 Growth
Mepiquat chloride sprayed at first bloom stage in cotton increased the photosynthesis
and there by increased the dry matter production (Walter et al., 1980). A decrease in plant
height was observed by Mc Connel et al. (1992) with foliar application of mepiquat chloride
four times in cotton.
Madalageri and Ganiger (1993) recorded reduced plant height (48.9 to 47.3cm) with
the application of mepiquat chloride at 100 to 125 ppm than untreated control (59.5cm) in
potato. Such reduction in plant height with the spraying of mepiquat chloride was also noticed
in potato (Gasti. 1994) and in true potato (Madalageri, 1996).
Rajesh (1995) observed significant increase in number of branches (18.73) and
number of leaves per plant (219.12) and decreased plant height (39.12 cm) with 500 ppm
foliar spray of mepiquat chloride compared to control (10.13, 118.03 and 4265 cm.
respectively) in calendula. Whereas, El-Shahawy (2000) reported reduced plant height, with
the application of 50 g a.i. per litre of mepiquat chloride in cotton.
Foliar spray of mepiquat chloride at 100 and 200 mg per ml during vegetative and
flowering stage improved the number of branches, leaves and leaf area index, while spray
during the podding stage did not significantly affect these parameters in groundnut
(Amandeep et al., 2004).
Rao et al. (2005) reported that the application of 50 ppm mepiquat chloride resulted in
higher flowers setting, 100 seed weight, seed yield, biomass at harvest, harvest index and
lowest number of abortive flowers in chickpea.
Significant reduction in plant height, increased number of primary and secondary
branches were recorded with the application of mepiquat chloride (300, 200 and 100 ppm) in
mustard (Parminder Kaur and Sidhu, 2007).
cent over the control, while a single spray at high concentration (200 and 250 ppm) increased
seed cotton yield by 37.39 per cent over the control.
Doddagoudar et al. (2002) in china aster recorded that spraying of 500 mepiquat
chloride resulted in higher seed yield as compared to control.
Bagewadi et al. (2003) reported highest mean number of pods per plant (38.58),
number of filled pods per plant (33.36), 100 pod weight (109.08 g), pod yield per plot (1.51/kg)
and total pod yield (2533.32 kg/ha) with the application of mepiquat chloride (2 ml/l) in
groundnut.
Neelima et al. (2005) reported significant increase in number of flowers per plant
(227.89), number of pods per plant (104.20), pod setting percentage (45.94) and number of
seeds per pod (2.270), with the foliar application of 200 mg/l of mepiquat chloride. He further
recorded higher 100 seed weight (11.491 g), seed weight per plant (26.04 g) and yield per
plot (4.375 kg) with 100 mg/l of mepiquat chloride in soybean.
Rao et al. (2005) reported higher flower setting, 100 seed weight, biomass at harvest,
seed yield and harvest index and lowest number of aborted flowers with the application of 50
ppm of mepiquat chloride in chickpea.
Significantly greater seed yield was recorded with the application of 50 and 25 g a.i.
per ha of mepiquat chloride in common vetch (Tan and Temel, 2005).
Significant increase in seed yield of pea was reported with the application of mepiquat
chloride at 25 g a.i. per ha (Elkoca and Kantar, 2006).
Mahadevmurthy and Nagarathna (2008) recorded maximum tuber yield per square
metre (4.5 kg) with foliar application of mepiquat chloride at 300 ppm sprayed at 45 and 60
days after sowing in potato.
3.1
General description
3.1.2 Soil
The experiment was conducted in black soil. The physical and chemical composition
of soil in the experimental field is presented in Table 1.
3.1.3 Climate
The data on weather parameters such as rainfall (mm), mean maximum and
o
minimum temperature ( C) and relative humidity (%) recorded at Meteorological Observatory,
Main Agricultural Research Station, University of Agricultural Sciences, Dharwad during the
experimental year (2008-09) and the mean of the last 58 years (1950-2008) are presented in
Table 2.
The mean annual rainfall for the past 58 years was 768.4 mm and the maximum
rainfall was received in the month of July (152.4 mm) followed by October (126.9 mm). The
total rainfall during 2008-09 was 844.4 mm and a maximum of 213.2 mm was received in
August. The months of December, January and February did not receive any rainfall during
o
this year. The mean maximum temperature ranged from 35.1 (May) to 26.9 C (August) during
2008. The months of April, May and June were hottest. While the mean maximum
temperature during past 58 years indicated that it was maximum in April (37.3oC) followed by
o
o
May (33.7 C). The minimum temperature ranged from 13.0 (January) to 21.0 C (June) during
2008-09. The average of last 58 years indicated that the mean minimum temperature was
maximum during June (22.4oC) and minimum during December (12.5oC). The relative
humidity ranged from 57.5 (February) to 91.8 per cent (June) during 2008-09, while it ranged
from 51.5 per cent (February) to 87.1 per cent (July) during the last 58 years. The cropping
period prevailed from July 2008 to November 2008. The rainfall was ill distributed with short
dry spells during flowering stage which affected yield to some extent.
3.2
Groundnut was grown in the experimental site during the previous season i.e. rabi
2007-2008.
Particulars
Values
I.
Physical properties
1.
6.10%
2.
13.14%
3.
28.00%
4.
62.76%
II.
Chemical properties
Available nitrogen (Alkaline permanganate method) (Subbaiah
0.0068%
0.007%
0.016%
III.
pH
7.5
IV.
0.31
Table 2: Monthly meteorological data during crop growth period (2008-09) and the average of 58 years (1950-2008) at Main Agricultural Research
Station, UAS, Dharwad
Temperature (oC)
Rainfall (mm)
Months
Mean maximum
2008-09
1950-2008
2008-09
1950-2008
2008-09
1950-2008
2008-09
1950-2008
April 2008
28.8
49.3
34.7
37.3
20.4
19.8
80.4
75.6
May
55.8
80.2
35.1
33.7
20.6
21.3
85.1
66.2
June
101.6
114.2
28.7
28.8
21.0
22.4
91.8
81.1
July
121.0
152.4
28.2
29.1
20.7
21.0
91.3
87.1
August
213.2
98.5
26.9
26.9
20.1
20.0
91.5
86.0
September
162.4
104.9
27.8
28.5
20.0
19.9
91.4
82.1
October
60.4
126.9
30.3
30.0
18.9
18.4
83.5
75.8
November
72.2
33.0
29.3
30.1
15.9
15.9
79.4
68.0
December
0.0
5.2
28.6
29.3
13.8
12.5
75.4
63.2
January 2009
0.0
0.1
29.8
29.6
13.3
14.6
66.6
63.1
February
0.0
1.1
33.2
31.2
16.8
16.3
57.5
51.5
March
29.0
2.3
35.0
32.4
19.9
19.5
73.0
56.0
Total
844.4
768.4
: 30 x 30 cm
S2
: 45 x 30 cm
S3
: 60 x 30 cm
F2
F3
S2F1
S3F1
S1F2
S2F2
S3 F 2
S1F3
S2F3
S3 F 3
S1 : 2.70 m x 2.70 m
S2 : 2.70 m x 2.55 m
S3 : 2.70 m x 2.40 m
3.4
Seed source
3.5
Cultural practices
The details of cultural operations carried out during the course of investigation
including the nursery operations are furnished below.
Nursery
Legend
: 30 x 30 cm
S2
: 45 x 30 cm
S3
: 60 x 30 cm
F2
F3
S2F1
S3F1
S1F2
S2F2
S3 F 2
S1F3
S2F3
S3 F 3
3.5.1 Nursery
Raised nursery bed of 6.0 x 1.2 m was prepared and drenched with captan (0.01%)
before sowing the seeds. After sowing carbofuran (3G) granules were sprinkled all along the
sides of the nursery bed. The nursery bed was watered twice for first 10 days and daily once
for the remaining period. Hand weeding was done 10 days after sowing. The seedlings were
ready for transplanting at 20 days after sowing.
3.5.3 Transplanting
The treatments were allotted randomly in the main experimental plot and 20 days old
seedlings were transplanted with the spacings as in experiment distributed randomly.
Transplanting was done at the rate of one seedling per hill. Light irrigation was given soon
after transplanting.
3.5.7 Harvesting
Harvesting of capitula for seed purpose was done at 100 DAT. The fully dried flowers
were harvested treatment wise and sun dried for three days. The dried flowers were threshed,
cleaned and filled seeds were separated from chaffy seeds and were used for assessing the
seed yield and seed quality parameters.
3.6
Collection of data
3.7
G1
G2
G3
G4
G5
G6
G7
G8
: 3.0 x 3.0 m
: 2.55 x 2.70 m
3.8
Cultural operations
The details of cultural operations carried out during the course of investigation
including the nursery operations are furnished as below.
3.8.3 Transplanting
Twenty days old seedlings were transplanted with 30 x 45 cm spacing. Transplanting
was done at the rate of one seedling per hill, light irrigation was given soon after
transplanting.
Legend
G0
G1
G2
G3
G4
G5
G6
G7
G8
Gibberellic acid (GA3) 200 ppm : Two hundred milligram of GA3 was dissolved in few millilitre
of alcohol and the final volume was made up to 1000 ml of distilled water.
Tricontanol (TRIA) 500 ppm: Five hundred milligram was dissolved in few millilitre of distilled
water and the final volume was made up to 1000 millilitre of distilled water.
Tricontanol (TRIA) 1000 ppm: One millilitre was dissolved in few millilitre of distilled water and
the final volume was made up to 1000 millilitre of distilled water.
Chloro-choline chloride (CCC) 1000 ppm: One millilitre of CCC was dissolved in few millilitre
of alcohol and the final volume was made up to 1000 millilitre of distilled water.
Chloro-choline chloride (CCC) 2000 ppm: Two millilitre of CCC was dissolved in few millilitre
of alcohol and the final volume was made up to 1000 mililitre of distilled water.
Mepiquat chloride (MC) 1000 ppm: One millilitre of mepiquat chloride was dissolved in few
millilitre of alcohol and the final volume was made up to 1000 mililitre of distilled water.
Mepiquat chloride (MC) 2000 ppm: Two millilitre of mepiquat chloride was dissolved in few
millilitre of alcohol and the final volume was made up to 1000 mililitre of distilled water.
3.8.9 Harvesting
The harvesting method used was similar as described under section 3.5.7.
3.9
Net income per hectare (Rs. ha-1) for both the experiments was calculated by
considering the prices of inputs that were prevailing at the time of their use were considered
for working out the cost of cultivation (Table.3). Gross return was calculated by multiplying the
-1
price of produce (seeds) with total seed yield produced per hectare. Net returns (Rs. ha )
were calculated by deducing cost of cultivation from gross returns. The cost benefit ratio was
calculated by dividing net returns by total cost of production.
Inputs
Price (Rs.)
1. Seeds
2000 per Kg
2. Urea
500 per q
480 per q
4. Murate of potash
460 per q
5. Men labour
60 per day
6. Women labour
50 per day
7. Bullock pair
8. Endosulphon
75 per g
98 per 250 ml
99 per 100 ml
4. EXPERIMENTAL RESULTS
A field experiment was conducted during kharif 2008 at Main Agricultural Research
Station, University of Agricultural Sciences, Dharwad to study the effect of spacing, fertilizer
levels and growth regulators on seed yield and quality in annual chrysanthemum. The results
obtained from the experiments are presented in this chapter.
Table 4: Effect of spacing and fertilizer levels on plant height (cm) at different growth stages of annual chrysanthemum
Plant height (cm)
30 DAT
Spacing
60 DAT
At harvest
F1
F2
F3
Mean
F1
F2
F3
Mean
F1
F2
F3
Mean
S1
40.83
41.30
43.70
41.94
79.90
82.29
82.96
81.72
91.13
92.93
93.69
92.58
S2
38.73
40.20
40.73
39.89
77.34
78.92
79.83
78.70
86.80
88.40
90.05
88.42
S3
36.77
38.20
40.00
38.12
73.33
75.34
79.13
75.94
83.17
85.08
89.33
85.86
Mean
38.78
39.90
41.28
39.99
76.86
78.85
80.64
78.78
87.03
88.80
91.02
88.95
SEm
CD at 5%
SEm
CD at 5%
SEm
CD at 5%
Spacing (S)
0.60
1.81
0.99
2.97
1.05
3.14
0.60
1.81
0.99
2.97
1.05
3.14
SxF
1.04
NS
1.71
NS
1.81
NS
S- Spacing
S1: 30 x 30 cm
S2: 30 x 45 cm
S3: 30 x 60 cm
F- Fertilizer levels
F1: 75:112.5: 75 kg NPK/ ha
F2: 100: 150: 100 kg NPK/ ha
F3: 125: 187.5: 125 kg NPK/ ha
Fig.3. Influence of different spacing and fertilizer levels on plant height at 30, 60 DAT and at harvest in annual chrysanthemum
(4.76) followed by F2 (4.41) and was less with F1 (4.02) at 30 DAT. AT 60 DAT, relatively
more number of branches (20.95) were noticed with F3 followed by F2 (19.14) and lowest with
F1 (16.97). Similarly at harvest, number of branches (23.84) were more with F3 followed by F2
(21.96) and significantly less with F1 (20.37).
The number of branches per plant did not differ significantly due to interaction effect
of spacing and fertilizer levels at all the stages of crop growth. At 30 DAT, number of
branches (5.17) were relatively more with S3F3 followed by S3F2 (5.03) and S3F1 (4.80) which
were on par with each other and lowest with S1F1 (3.03). AT 60 DAT, relatively more
branches (24.76) were noticed with S3F3 followed by S3F2 (22.65) and lowest with S1F1
(15.10). Similarly at harvest relatively more branches (26.20) were noticed with S3F3 followed
by (24.87) with S3F2 and lowest with S1F1 (17.27).
4.1.1.3 Number of leaves per plant
The results on number of leaves at 30, 60 DAT and at harvest as influenced by
spacing, fertilizer levels and their interaction effects are presented in Table 6.
As the growth advanced, the mean number of leaves per plant increased from 75.71
at 30 DAT to 641.92 at harvest.
Number of leaves differed significantly due to spacing at 30, 60 DAT and at harvest.
At 30 DAT, significantly more number of leaves (81.52) were recorded with S3 followed by S2
(75.40) and less with S1 (70.20). At 60 DAT, number of leaves were markedly more (412.44)
with S3 followed by S2 (390.63) and lowest (368.78) with S1. Similarly at harvest relatively
more number of leaves (666.25) were noticed in S3 followed by (641.55) with S2 and lowest
with S1 (617.97).
Number of leaves differed significantly due to fertilizer at 30, 60 DAT and at harvest.
At 30 DAT among the fertilizer levels, number of leaves were significantly more (78.89) with
F3 followed by F2 (75.68) and less with F1 (72.56). At 60 DAT also the number of leaves were
significantly more (404.49) with F3 followed by F2 (390.56) and less (376.79) with F1. Similarly
at harvest relatively more number of leaves (657.12) were noticed in F3 followed by F1
(641.63) and less with F1 (627.02). However F2 and F3 were statistically on par with each
other at all stages of crop growth.
The number of leaves did not differ significantly due to interaction effect between
spacing and fertilizer levels except at harvest. At 30 DAT, number of leaves (84.67) were
relatively more with S3F3 which was on par S3F2 (82.00) followed by S2F3 (79.33) and lowest
with S1F1 (67.83). AT 60 DAT, relatively more number of leaves (428.23) were noticed with
S3F3 followed by S3F2 (411.35) and lowest with S3F1 (356.71). Significantly more number of
leaves at harvest were noticed with S3F3 (681.24) followed by S3F2 (666.03) and lowest with
S1F1 (602.67).
2
Table 5: Effect of spacing and fertilizer levels on number of branches at different growth stages of annual chrysanthemum
Number of branches /plant
Spacing
30 DAT
60 DAT
At harvest
F1
F2
F3
Mean
F1
F2
F3
Mean
F1
F2
F3
Mean
S1
3.03
3.87
4.27
3.72
15.10
15.67
17.87
16.21
17.27
18.93
21.33
19.18
S2
4.23
4.33
4.83
4.47
16.14
19.10
20.23
18.49
21.03
22.07
24.00
22.37
S3
4.80
5.03
5.17
5.00
19.67
22.65
24.76
22.36
22.80
24.87
26.20
24.62
Mean
4.02
4.41
4.76
4.40
16.97
19.14
20.95
19.02
20.37
21.96
23.84
22.06
SEm
CD at 5%
SEm
CD at 5%
SEm
CD at 5%
Spacing (S)
0.10
0.30
0.35
1.06
0.38
1.14
0.10
0.30
0.35
1.06
0.38
1.14
SxF
0.18
NS
0.61
NS
0.66
NS
S- Spacing
S1: 30 x 30 cm
S2: 30 x 45 cm
S3: 30 x 60 cm
F- Fertilizer levels
F1: 75:112.5: 75 kg NPK/ ha
F2: 100: 150: 100 kg NPK/ ha
F3: 125: 187.5: 125 kg NPK/ ha
Fig.4. Influence of different spacing and fertilizer levels on number of branches at 30,60 DAT and at harvest in annual chrysanthemum
Table 6: Effect of spacing and fertilizer levels on number of leaves at different growth stages of annual chrysanthemum
Number of leaves /plant
Spacing
30 DAT
60 DAT
At harvest
F1
F2
F3
Mean
F1
F2
F3
Mean
F1
F2
F3
Mean
S1
67.83
70.10
72.67
70.20
356.71
369.59
380.03
368.78
602.67
618.31
632.93
617.97
S2
71.93
74.93
79.33
75.40
375.93
390.73
405.22
390.63
626.90
640.56
657.19
641.55
S3
77.90
82.00
84.67
81.52
397.73
411.35
428.23
412.44
651.48
666.03
681.24
666.25
Mean
72.56
75.68
78.89
75.71
376.79
390.56
404.49
390.61
627.02
641.63
657.12
641.92
For comparing
the means of
SEm
CD at 5%
SEm
CD at 5%
SEm
CD at 5%
Spacing (S)
1.25
3.75
4.99
14.95
4.38
13.14
Fertilizer levels
(F)
1.25
3.75
4.99
14.95
4.38
13.14
SxF
2.17
NS
8.64
NS
7.59
22.75
S- Spacing
S1: 30 x 30 cm
S2: 30 x 45 cm
S3: 30 x 60 cm
F- Fertilizer levels
F1: 75:112.5: 75 kg NPK/ ha
F2: 100: 150: 100 kg NPK/ ha
F3: 125: 187.5: 125 kg NPK/ ha
F3 (2324.01 cm2) followed by F2 (2175.70 cm2) and lowest with F1 (1853.13 cm2).Similarly at
2
harvest relatively more leaf area (3479.56 cm ) was noticed in F3 followed by F2 (3174.79
2
2
cm ) and lowest in F1 (2874.89 cm ).
The leaf area per plant differed significantly due to interaction effect of spacing and
fertilizer levels except at harvest stage of crop growth. At 30 DAT, significantly more leaf area
2
2
2
(432.13 cm ) with S3F3 followed by (391.43 cm ) with S3F2 and lowest with S1F1 (224.77 cm ).
AT 60 DAT, significantly more leaf area was noticed in S3F3 (2620.68 cm2) followed by
(2494.47 cm2) with S3F2 and lowest with S3F1 (1654.76 cm2). Significantly more leaf area
2
2
(3924.73 cm ) at harvest was noticed with S3F3 followed by (3705.36 cm ) with S3F2 and
2
lowest with S1F1 (2439.20 cm ).
4.1.1.5 Days to 50 per cent flowering
The data on days to 50 per cent flowering as influenced by spacing, fertilizer levels
and their interaction effects are presented in Table 8.
Days to 50 per cent flowering differed significantly due to spacing. Minimum number
of days to 50 per cent flowering was noticed with narrow spacing of S1 (58.89) followed by S2
(60.56) and maximum with wider spacing of S3 (62.45).
Significant differences were noticed on days to 50 per cent flowering due to fertilizer
levels. Significantly minimum (60.00) days were taken for 50 per cent flowering with F3
compared to F2 (60.33) days and maximum (61.56) days with F1 level of fertilizer. However F2
and F1 were statistically on par with each other.
Significant differences were noticed on days to 50 per cent flowering due to
interaction effect of spacing and fertilizer levels. Significantly minimum (58.33) days were
taken for 50 per cent flowering with S1F3 which was on par with S1F2 (58.67) days and
maximum with S3F1 (63.67).
Table 7: Effect of spacing and fertilizer levels on leaf area (cm )/plant at different stages of annual chrysanthemum
2
30 DAT
60 DAT
At harvest
F1
F2
F3
Mean
F1
F2
F3
Mean
F1
F2
F3
Mean
S1
224.77
262.25
281.16
256.06
1654.76
1807.67
2007.88
1823.44
2439.20
2661.60
3008.27
2703.02
S2
309.87
317.08
345.31
324.09
1621.68
2224.96
2343.48
2063.37
2839.06
3157.42
3505.67
3167.38
S3
363.61
391.43
432.13
395.72
2282.93
2494.47
2620.68
2466.03
3346.40
3705.36
3924.73
3658.83
Mean
299.42
323.59
352.87
325.29
1853.13
2175.70
2324.01
2117.61
2874.89
3174.79
3479.56
3176.41
SEm
CD at 5%
SEm
CD at 5%
SEm
CD at 5%
Spacing (S)
2.55
7.64
25.53
76.54
38.61
115.75
2.55
7.64
25.53
76.54
38.61
115.75
SxF
4.41
13.23
44.22
132.57
66.87
NS
S- Spacing
S1: 30 x 30 cm
S2: 30 x 45 cm
S3: 30 x 60 cm
F- Fertilizer levels
F1: 75:112.5: 75 kg NPK/ ha
F2: 100: 150: 100 kg NPK/ ha
F3: 125: 187.5: 125 kg NPK/ ha
Significant interaction effect of spacing and fertilizer levels was with respect to flower
diameter was recorded. Significantly more flower diameter (5.58cm) was recorded with S3F3
which was on par with S3F2 and S2F3 (5.54 and 5.44 cm, respectively) and less with S1F1
(4.77 cm).
4.1.2.3 Number of seeds per flower
The data on number of seeds per flower as influenced by spacing, fertilizer levels and
their interaction effects are presented in Table 9.
Number of seeds per flower differed significantly due to spacing treatment and was
significantly more with S3 (252.12) followed by S2 (245.12) and less with S1 (240.09).
Number of seeds per flower differed significantly due to fertilizer levels and was more
with F3 (249.83) was statistically on par with F2 (245.98) and less with F1 (241.52).
The number of seeds per flower did differed significantly due to interaction effect of
spacing and fertilizer levels. Significantly more number of seeds (256.97) per flower were
recorded with S1F3 followed by S3F2 (252.00) and less with S1F1 (235.33).
4.1.2.4 Flower dry weight (g)
The data on flower dry weight as influenced by spacing, fertilizer levels and their
interaction effects are presented in Table 10.
Flower dry weight differed significantly due to spacing treatment and was significantly
more with S3 (0.620 g) followed by S2 (0.550 g) and less with S1 (0.496 g).
Flower dry weight differed significantly due to fertilizer levels and was more with F3
(0.598 g) which was statistically on par with F2 (0.556 g) and less with F1 (0.511 g).
Flower dry weight did not differ significantly due to interaction effect of spacing and
fertilizer levels. Numerically more flower dry weight (0.660 g) was recorded with S1F3 followed
by S3F2 (0.630 g) and less with S1F1 (0.460 g).
4.1.2.5 Seed yield per plant (g)
The data on seed yield per plant as influenced by spacing, fertilizer levels and their
interaction effects are presented in Table 10.
Significant differences were noticed on seed yield per plant due to spacing.
Significantly more seed yield per plant (5.55 g) was recorded with S3 followed by S2 (4.48 g) and lowest with S1 (3.39 g).
The seed yield per plant found to differ significantly among the fertilizer levels and
was more with F3 (5.20 g) followed by F2 (4.33 g) and less with F1 (3.89 g).
Among the interaction significantly maximum seed yield per plant (6.07 g) was
recorded with S3F3 followed by S3F2 (5.50 g) and minimum with S1F1 (2.87 g).
4.1.2.6 Seed yield per hectare (kg)
The data on seed yield per plant as influenced by spacing, fertilizer levels and their
interaction effects are presented in Table 10 and Fig. 6.
Significant differences were noticed on seed yield per hectare due to spacing.
Significantly more seed yield per plant (377.04 kg) was recorded with S1 followed by S2
(331.85 kg) and lowest with S3 (308.15 kg).
The seed yield per plant found to differ significantly among the fertilizer levels and
was more with F3 (401.17 kg) followed by F2 (323.58 kg) and less with F1 (292.28 kg).
Among the interaction significantly maximum seed yield per plant (478.89 kg) was
recorded with S1F3 followed by S1F2 (333.33 kg) and minimum with S3F1 (281.67 kg).
Table 8: Effect of spacing and fertilizer levels on days to 50% flowering and number of flowers/plant in annual chrysanthemum
Days to 50% flowering
Number of flowers
Spacing
F1
F2
F3
Mean
F1
F2
F3
Mean
S1
59.67
58.67
58.33
58.89
66.38
67.85
72.33
68.85
S2
61.33
60.33
60.00
60.55
69.19
73.21
78.00
73.47
S3
63.67
62.00
61.67
62.45
74.31
83.83
85.28
81.14
Mean
61.56
60.33
60.00
60.63
69.96
74.96
78.54
74.49
SEm
CD at 5%
SEm
CD at 5%
Spacing (S)
0.44
1.33
0.68
2.03
0.44
1.33
0.68
2.03
SxF
0.77
2.30
1.17
3.52
S- Spacing
S1: 30 x 30 cm
S2: 30 x 45 cm
S3: 30 x 60 cm
F- Fertilizer levels
F1: 75:112.5: 75 kg NPK/ ha
F2: 100: 150: 100 kg NPK/ ha
F3: 125: 187.5: 125 kg NPK/ ha
Fig.5. Influence of different spacing and fertilizer levels on number on number of flowers in annual chysanthemum
Table 9: Effect of spacing and fertilizer levels on diameter (cm) of flower and number of seeds/flower in annual chrysanthemum
Diameter (cm) of flower
Spacing
F1
F2
F3
Mean
F1
F2
F3
Mean
S1
4.77
4.86
5.24
4.96
235.33
240.53
244.40
240.09
S2
5.16
5.34
5.44
5.31
241.83
245.40
248.13
245.12
S3
5.35
5.54
5.58
5.49
247.40
252.00
256.97
252.12
Mean
5.09
5.25
5.42
5.25
241.52
245.98
249.83
245.78
SEm
CD at 5%
SEm
CD at 5%
Spacing (S)
0.07
0.20
1.40
4.19
0.07
0.20
1.40
4.19
SxF
0.12
0.35
2.42
8.30
S- Spacing
S1: 30 x 30 cm
S2: 30 x 45 cm
S3: 30 x 60 cm
F- Fertilizer levels
F1: 75:112.5: 75 kg NPK/ ha
F2: 100: 150: 100 kg NPK/ ha
F3: 125: 187.5: 125 kg NPK/ ha
Table 10: Effect of spacing and fertilizer levels on flower dry weight (g), seed yield (g/plant) and seed yield (kg/ha) in annual chrysanthemum
Spacing
F1
F2
F3
Mean
F1
F2
F3
Mean
F1
F2
F3
Mean
S1
0.460
0.490
0.538
0.496
2.87
3.00
4.31
3.39
318.89
333.33
478.89
377.04
S2
0.503
0.549
0.597
0.550
3.73
4.48
5.23
4.48
276.30
331.85
387.41
331.85
S3
0.569
0.630
0.660
0.620
5.07
5.50
6.07
5.55
281.67
305.56
337.22
308.15
Mean
0.511
0.556
0.598
0.555
3.89
4.33
5.20
4.47
292.28
323.58
401.17
339.01
SEm
CD at 5%
SEm
CD at 5%
SEm
CD at 5%
Spacing (S)
0.01
0.03
0.07
0.19
5.67
16.99
0.01
0.03
0.07
0.19
5.67
16.99
SxF
0.02
NS
0.11
0.34
9.81
29.42
S- Spacing
S1: 30 x 30 cm
S2: 30 x 45 cm
S3: 30 x 60 cm
F- Fertilizer levels
F1: 75:112.5: 75 kg NPK/ ha
F2: 100: 150: 100 kg NPK/ ha
F3: 125: 187.5: 125 kg NPK/ ha
NS-Non significant
Fig.6. Influence of different spacing and fertilizer levels on seed yild/ha in annual chrysanthemum
Table 11: Effect of spacing and fertilizer levels on 1000 seed weight (g), germination (%), seedling length (cm) in annual chrysanthemum
1000 seed weight (g)
Spacing
Germination (%)
F1
F2
F3
Mean
S1
1.81
1.83
1.85
1.83
S2
1.84
1.90
1.95
1.90
S3
1.94
1.98
2.00
1.97
Mean
1.87
1.90
1.94
1.90
F1
F2
F3
Mean
60.33
61.33
62.33
61.33
(50.94)*
(51.53)
(52.12)
(51.53)
62.00
62.67
63.33
62.67
(51.92)
(52.32)
(52.71)
(52.32)
63.00
64.00
66.67
64.56
(52.51)
(53.11)
(54.71)
(53.45)
61.78
62.67
64.11
62.85
(51.79)
(52.32)
(53.18)
(52.43)
F1
F2
F3
Mean
8.37
8.97
9.30
8.88
9.26
9.61
9.93
9.60
9.45
10.02
10.63
10.04
9.03
9.53
9.95
9.50
SEm
CD at 5%
SEm
CD at 5%
SEm
CD at 5%
Spacing (S)
0.007
0.021
0.22
0.66
0.13
0.39
0.007
0.021
0.22
0.66
0.13
0.39
0.012
NS
0.38
NS
0.23
NS
S- Spacing
F- Fertilizer levels
NS-Non significant
S1: 30 x 30 cm
F1: 75:112.5: 75 kg NPK/ ha
S2: 30 x 45 cm
F2: 100: 150: 100 kg NPK/ ha
S3: 30 x 60 cm
F3: 125: 187.5: 125 kg NPK/ ha
NOTE: Figures in parenthesis are arcsine transformed values and figures without parenthesis indicate the original values
The maximum cost of cultivation (57168.8 Rs. ha ) was noticed in the treatment
combination of S1F3 (S1: 30 x 30 cm with F3: 125: 187.5: 125 Kg NPK/ ha) followed by
(50059.9 Rs. ha-1) with S2F3 (S2: 30 x 45 cm with F3: 125: 187.5: 125 Kg NPK/ ha). The
-1
minimum cost of cultivation (42899.15 Rs. ha ) was noticed S2F1 (S2: 30 x 45 cm with F2: 100:
-1
150: 100 Kg NPK/ ha). The maximum gross returns per ha (958520 Rs. ha ) was in the
treatment combination of S1F3 (S1: 30 x 30 cm with F3: 125: 187.5: 125 Kg NPK/ ha) followed
by S2F3 (750620 Rs. ha-1) and minimum gross returns was noticed in S2F1 (553080 Rs. ha-1).
-1
The maximum net return was noticed in S1F3 (901351.2 Rs. ha ) followed by S2F3 700560.0
-1
-1
Rs. ha ) and minimum in S2F1 (510180.9 Rs. ha ). The cost benefit ratio was maximum in
S1F3 (1:15.77) followed by S2F3 (1:13.99) and minimum in S2F1 (1:11.89). Increase in benefit
cost ratio was more in S1F3 (1:15.77) and S2F3 (1:13.99) and least in S2F1 (1:11.89).
4.2
-1
Table 12: Effect of spacing and fertilizer levels on seedling dry weight (mg), seedling vigour index and electrical conductivity of seed leachate (dSm )
in annual chrysanthemum
Spacing
F1
F2
F3
Mean
F1
F2
F3
Mean
F1
F2
F3
Mean
S1
27.67
29.00
30.00
28.89
505
550
580
545
0.973
0.943
0.882
0.933
S2
29.67
31.00
31.67
30.78
574
602
629
602
0.910
0.862
0.803
0.858
S3
31.33
32.33
34.67
32.78
595
641
709
648
0.852
0.816
0.781
0.816
Mean
29.56
30.78
32.11
30.81
558
598
639
598
0.912
0.874
0.822
0.869
SEm
CD at 5%
SEm
CD at 5%
SEm
CD at 5%
Spacing (S)
0.32
0.95
9.79
29.35
0.01
0.03
0.32
0.95
9.79
29.35
0.01
0.03
SxF
0.55
NS
16.96
NS
0.02
NS
S- Spacing
S1: 30 x 30 cm
S2: 30 x 45 cm
S3: 30 x 60 cm
F- Fertilizer levels
F1: 75:112.5: 75 kg NPK/ ha
F2: 100: 150: 100 kg NPK/ ha
F3: 125: 187.5: 125 Kg NPK /ha
NS-Non significant
At 60 DAT application of GA3 at 200 ppm recorded significantly higher plant height
(84.93 cm) which was on par with GA3 (100 ppm), tricontanol at 500 ppm and 1000 ppm
which recorded (82.77, 79.97 and 80.63 cm, respectively) and significantly more compared to
cycocel at 1000 and 2000 ppm and mepiquat chloride at 1000 and 2000 ppm which recorded
73.01, 71.94, 75.91 and 73.86 cm, respectively. The later four treatments, cycocel at 1000
and 2000 ppm and mepiquat chloride at 1000 and 2000 ppm were on par with each other and
had more reduced plant height compared to with control (77.30 cm).
Similarly at harvest GA3 at 200 ppm recorded significantly higher (97.28 cm) plant
height over control (89.70 cm), tricontanol at 500 ppm and mepiquat chloride at 1000 ppm
recorded 90.08 and 87.87 cm, respectively and were on par with GA3 100 ppm, TRIA 1000
ppm which recorded 94.00 and 92.27 cm, respectively followed by CCC 1000 and mepiquat
chloride at 2000 ppm which recorded 85.01 and 85.97 cm, respectively. The later two
treatments were on par with each other. The plants sprayed with CCC (2000 ppm) recorded
the lowest plant height (83.17 cm).
4.2.1.2 Number of branches
The data on number of branches per plant at 30, 60 days after planting (DAT) and at
harvest as influenced by growth regulators are presented in Table 14 and Fig. 8.
At 30 DAT number of branches per plant did not differ significantly, whereas at 60
DAT and at harvest significantly increased the number of branches per plant compared to
control.
At 60 DAT, foliar application of GA3 at 200 ppm recorded significantly more number of
branches (25.80) which was on par with GA3 at 100 ppm and tricontanol at 1000 ppm which
recorded 24.33 and 23.80, respectively followed by tricontanol at 500 ppm, mepiquat chloride
at 1000, 2000 ppm and CCC 1000 ppm which recorded 22.13, 21.00 and 20.13, respectively
and least with CCC 2000 ppm and control which recorded 19.07 and 17.13 respectively.
Similarly at harvest GA3 at 200 ppm recorded significantly more number of branches
(27.32) which was on par with GA3 at 100 ppm, tricontanol at 500 and 1000 ppm which
recorded 26.20, 25.53 and 24.60, respectively followed by mepiquat chloride at 1000, 2000
ppm and CCC 1000 and 2000 ppm which recorded 23.47, 22.73, 22.27 and 21.73,
respectively and least with control (19.43).
4.2.1.3 Number of leaves per plant
The data on number of leaves per plant at 30, 60 DAT and at harvest as influenced
by growth regulators are presented in Table 15.
The number of leaves per plant differed significantly at 60 DAT and at harvest, while it
was non significant at 30 DAT.
At 60 DAT all the treatments showed significant differences over control (365.00).
GA3 at 200 ppm recorded significantly more leaves per plant (445.33) which was on par with
GA3 at 100 ppm and tricontanol at 1000 ppm which recorded 436.67 and 425.33, respectively
followed by tricontanol at 500 ppm, mepiquat chloride at 1000 and 2000 ppm recorded
416.33, 406.07 and 396.33, respectively. The later three treatments, tricontanol at 500 ppm,
mepiquat chloride at 1000 and 2000 ppm were on par with each other and less 385.67 and
376.97, respectively number of leaves among the growth regulating chemicals was recorded
with CCC 1000 and 2000 ppm.
Similarly at harvest all the treatments showed significant differences over control. GA3
at 200 ppm recorded significantly more leaves (702.43) which was on par with GA3 100 ppm,
tricontanol at 500 and 1000 ppm which recorded 695.40, 676.40 and 666.33, respectively
followed by mepiquat chloride at 1000 and 2000 ppm and CCC at 1000 and 2000 ppm which
recorded 669.0, 654.67, 647.33 and 639.33, respectively and the lowest number of leaves
(620.3) was recorded in control.
Table 13: Economic analysis of annual chrysanthemum seed production as influenced by different spacing, fertilizer levels and their interactions (S x
F)
Treatments
Gross returns
(Rs./ha)
Net returns
(Rs./ha)
Cost-benefit ratio
S1F1
318.52
45515.2
637040
591524.8
1:13.00
S1F2
332.96
46562.1
665920
619357.9
1:13.30
S1F3
479.26
57168.8
958520
901351.2
1:15.77
S2F1
276.54
42899.15
553080
510180.9
1:11.89
S2F2
332.1
46927.2
664200
617272.8
1:13.15
S2F3
375.31
50059.9
750620
700560.0
1:13.99
S3F1
290.74
44356.15
581480
537123.9
1:12.11
S3F2
305.37
45416.83
610740
565323.2
1:12.45
S3F3
337.41
47739.7
674820
627080.3
1:13.14
Table 14: Effect of growth regulators on plant height (cm) and number of branches at different growth stages of annual chrysanthemum
Plant height (cm)
No of branches/plant
Treatments
30 DAT
60 DAT
At harvest
30 DAT
60 DAT
At harvest
G0-Control
40.17
77.30
89.70
4.00
17.13
19.43
G1-GA3 @ 100ppm
40.50
82.77
94.00
4.33
24.33
26.20
40.00
84.93
97.28
4.00
25.80
27.32
39.17
79.97
90.08
3.67
22.13
24.60
39.67
80.63
92.27
4.33
23.80
25.53
40.83
73.01
85.01
4.67
20.00
22.27
39.33
71.94
83.17
3.33
19.07
21.73
39.67
75.91
87.87
4.33
21.00
23.47
41.33
73.86
85.97
4.00
20.13
22.73
SEM
0.86
1.90
2.13
0.41
0.79
0.97
CD at 5%
NS
5.69
6.37
NS
2.37
2.91
NS-Non significant
Fig.7. Influence of growth regulators on plant height at 30, 60 DAT and at harvest in annual chrysanthemum
Fig.8. Influence of growth regulators on number of branches/plant at 30, 60 DAT and at harvest in annual chrysanthemum
Table 15: Effect of growth regulators on number of leaves /plant and leaf area (cm2) at different growth stages of annual chrysanthemum
leaf area (cm2)/plant
60 DAT
At harvest
30 DAT
60 DAT
At harvest
G0-Control
73.00
365.00
620.33
375.33
2256.30
3123.77
G1-GA3 @ 100ppm
77.33
436.67
695.40
365.00
3599.74
4359.40
78.90
445.33
702.43
386.67
3742.67
4497.24
76.60
416.33
666.33
377.83
3393.24
4161.63
78.33
425.33
676.40
391.67
3527.23
4286.43
75.57
385.67
647.33
373.33
3097.20
4031.93
74.67
376.97
639.33
394.50
2693.09
3562.09
75.67
406.07
669.00
383.00
3309.57
4250.23
75.07
396.33
654.67
378.33
3281.40
4190.63
SEM
2.54
9.16
10.83
12.71
45.32
54.33
CD at 5%
NS
27.47
32.46
NS
135.88
162.88
NS-Non significant
ppm (5.40 cm) was on par CCC at 1000 and 2000 ppm which recorded 5.36 and 5.32 cm,
respectively and the least with control (5.27 cm).
4.2.2.3 Number of seeds per flower
The data on number of seeds per flower as influenced by growth regulators are
presented in Table 16.
All treatments differed significantly over control. GA3 at 200 ppm recorded
significantly more number of seeds per flower (265.33) which was on par with GA3 at 100
ppm, tricontanol at 1000 and 500 ppm which recorded 261.67, 259.80 and 258.13,
respectively. The later three treatments, GA3 at 100 ppm, tricontanol at 100 and 500 ppm
were on par with each other followed by mepiquat chloride at 1000, 2000 ppm and CCC 1000
ppm which recorded 254.73, 251.67 and 247.67, respectively. CCC 2000 ppm recorded less
number of seeds (242.33) among chemical and least with control (236.00).
4.2.2.4 Flower dry weight (g)
The data on flower dry weight as influenced by growth regulators are presented in
Table 17.
Significantly higher flower dry weight (0.747 g) with GA3 at 200 ppm was recorded
and it was on par with GA3 at 100 ppm and tricontanol at 1000 ppm which recorded 0.717 and
0.678 g, respectively and significantly more compared to all other treatments. The treatments
tricontanol at 500 ppm, mepiquat chloride at 1000 and 2000 ppm which recorded 0.642, 0.625
and 0.597 g, respectively were on par with each other but they were significant over control
which recorded the lowest flower dry weight (0.527 g). The treatments CCC 1000 and 2000
ppm which recorded 0.592 and 0.559 g, respectively were on par with each other.
4.2.2.5 Seed yield per plant (g)
The data on seed yield per plant as influenced by growth regulators is presented in
Table 17.
All treatments differed significantly over control. Significantly higher seed yield per
plant (6.75 g) with GA3 at 200 ppm was recorded which was on par with GA3 at 100 ppm,
tricontanol at 1000 and 500 ppm which recorded 6.55, 6.42 and 6.17 g, respectively and
significantly more compared to all other treatments. The treatments mepiquat chloride at 1000
and 2000 ppm and CCC at 1000 ppm which recorded 6.04, 5.84 and 5.67 g, respectively
were on par with each other but significant over control which recorded the lowest seed yield
per plant (4.35 g). The treatments CCC 1000 and 2000 ppm which recorded (5.67 and 5.42 g,
respectively) were on par with each other.
4.2.2.6 Seed yield (kg/ha)
The data on seed yield per hectare as influenced by growth regulators is presented in
table 17 and Fig. 10.
All treatments differed significantly over control. Significantly higher seed yield per
plant (500.00 kg) with GA3 at 200 ppm was recorded which were on par with GA3 at 100 ppm,
tricontanol at 1000 and 500 ppm which recorded 485.19, 475.56 and 457.28 kg, respectively
and significantly more compared to all other treatments. The treatments mepiquat chloride at
1000 and 2000 ppm and CCC at 1000 ppm which recorded 447.16, 432.35 and 420.00 kg,
respectively were on par with each other but significant over control (322.5 kg) which
recorded the lowest seed yield per hectare. CCC at 2000 ppm which recorded (401.73 kg)
was on par with CCC at 1000 ppm.
Table 16: Effect of growth regulators on days to 50 % flowering, number of flower/plant, diameter of flower (cm) and number of seeds/flower in annual
chrysanthemum
Treatments
Number of flower/plant
Number of seeds/flower
G0-Control
60.33
70.81
5.27
236.00
G1-GA3 @ 100ppm
54.67
88.76
5.80
261.67
54.00
91.60
6.15
265.33
57.00
83.86
5.69
258.13
56.67
86.07
5.72
259.80
59.33
76.37
5.36
247.67
59.67
74.80
5.32
242.33
58.00
80.73
5.55
254.73
58.33
77.73
5.40
251.67
SEM
0.74
1.52
0.11
3.11
CD at 5%
2.23
4.55
0.32
9.33
Table 17: Effect of growth regulators on flower dry weight (g), seed yield (g/plant) and seed yield (kg/ha) in annual chrysanthemum
Treatment
G0-Control
0.527
4.35
322.47
G1-GA3 @ 100ppm
0.717
6.55
485.19
0.747
6.75
500.00
0.642
6.17
457.28
0.678
6.42
475.56
0.592
5.67
420.00
0.559
5.42
401.73
0.625
6.04
447.16
0.597
5.84
432.35
SEM
0.03
0.19
14.33
CD at 5%
0.09
0.58
42.96
500 ppm which recorded 2.11, 2.08 and 2.04 g, respectively followed by mepiquat chloride at
1000, 2000 ppm, CCC at 1000 and 2000 ppm which recorded (2.03, 2.00, 1.99 and 1.97 g,
respectively) and least with control (1.90 g).
4.2.3.2 Germination (%)
The data on germination percentage influenced by growth regulators are presented
in Table 18.
Significant differences were noticed among the treatments. GA3 at 200 ppm recorded
the highest germination percent (67.67 %) which was on par with GA3 at 100 ppm, tricontanol
at 2000 which recorded 66.33 and 66.00 %, respectively followed by tricontanol at 1000 ppm,
mepiquat chloride at 1000 and 2000 ppm which recorded 65.33, 65.00 and 64.67 %,
respectively. The later three treatments, tricontanol at 1000 ppm, mepiquat chloride at 1000
and 2000 ppm were on par with each other. CCC 1000 and 2000 ppm recorded less
germination 64.33 and 64.00 %, respectively among the chemicals and the least with control
(62.33).
4.2.3.3 Seedling length (cm)
The data on seedling length influenced by growth regulators are presented in Table
18.
Significant differences were noticed among the treatments. GA3 at 200 ppm recorded
the highest germination percent (10.60 cm) which was on par with GA3 at 100 ppm (10.45
cm) followed by tricontanol at 1000 ppm (10.26 cm). The later tricontanol at 1000 ppm was on
par with GA3 at 100 ppm followed tricontanol 500 ppm () 10.18 cm by mepiquat chloride at
1000 (10.17 cm) and lowest among growth regulators was recorded with mepiquat chloride at
2000 ppm, CCC at 1000 and 2000 ppm which recorded 9.80, 9.69 and 9.67 cm, respectively.
The later, mepiquat chloride at 2000 ppm, CCC at 1000 and 2000 ppm were on par with each
other and the least was recorded with control (9.67 cm).
4.2.3.4 Seedling dry weight (mg)
The data on seedling dry weight as influenced by growth regulators are presented in
Table 19.
All the treatments differed significantly over control. However GA3 at 200 ppm
recorded the highest seedling dry weight (36.67 g) which was on par with GA3 at 100 ppm
and tricontanol at 1000 ppm which recorded 35.34 and 35.33 g respectively followed by
tricontanol at 500 ppm, mepiquat chloride at 1000 which recorded 34.33 and 34.00
respectively. The later two treatments, tricontanol at 500 ppm, mepiquat chloride at 1000
were on par with each other but significant compared to mepiquat chloride at 2000 ppm and
CCC at 1000 ppm which recorded 33.34 and 33.00 g, respectively and less with CCC 2000
ppm (32.00 g) among chemicals and the least with control (31.00 g).
4.2.3.5 Vigour index
The data on vigour index as influenced by growth regulators are presented in Table
19.
All treatments differed significantly over control. GA3 at 200 ppm recorded the highest
vigour index (717) which was on par with GA3 at 100 ppm (699) followed by tricontanol at
1000 and 500 ppm which recorded 664 and 656, respectively. The later two treatments,
tricontanol at 1000 and 500 ppm were on par with each other and with mepiquat chloride at
1000 ppm and 2000 ppm 654 and 638, respectively. The treatments CCC at 1000 ppm and
2000 ppm recorded lower vigour index 636 and 626, respectively among the growth
regulators and least with control (602).
4.2.3.6 Electrical conductivity (dSm-1)
The data on electrical conductivity of seed leachate as influenced by growth
regulators are presented in Table 19.
Significant differences were noticed among the treatments. GA3 at 200 ppm recorded
-1
the lowest (0.662 dSm ) which was on par with GA3 at 100 ppm, tricontanol at 500 and 1000
Table 18: Effect of growth regulators on 1000 seed weight (g), germination (%) and seedling length (cm) in annual chrysanthemum
Treatment
Germination (%)
G0- Control
1.90
62.33 (52.12)*
9.67
2.11
66.33 (54.51)
10.45
2.14
67.67 (55.33)
10.60
2.04
65.33 (53.91)
10.18
2.08
66.00 (54.31)
10.26
1.99
64.33 (53.31)
9.69
1.97
64.00 (53.11)
9.67
2.03
65.00 (53.71)
9.80
2.00
64.67 (53.51)
10.17
SEM
0.03
0.42
0.07
CD at 5%
0.10
1.26
0.22
Table 19: Effect of growth regulators on seedling dry weight (mg), seedling vigour index, and electrical conductivity of seed leachate (dSm-1) in annual
chrysanthemum
Electrical conductivity of
seed leachate (dSm-1)
G0- Control
31.00
602
0.849
35.34
699
0.695
36.67
717
0.662
34.33
656
0.700
35.33
664
0.667
33.00
636
0.782
32.00
626
0.797
34.00
654
0.729
33.34
638
0.744
SEM
0.52
7.51
0.03
CD at 5%
1.55
22.52
0.08
Treatment
ppm which recorded 0.695, 0.667 and 0.700, dSm-1 respectively followed by mepiquat
chloride at 1000, 2000 ppm and CCC at 1000 and 2000 ppm which recorded 0.729, 0.744,
-1
0.782 and 0.797 dSm , respectively. The later two treatments,CCC at 1000 and 2000 ppm
were on par with control (0.849 dSm-1) which recorded the highest electrical conductivity.
4.2.4 Cost benefit ratio
The total cost of cultivation, gross returns, net returns, cost benefit ratio and increase
of cost benefit ratio over control due to growth regulator spray are presented in Table 20.
The economic analysis revealed that the maximum cost of cultivation with GA3 at 200
ppm (61100.0 Rs. ha-1) followed by GA3 at 100 ppm (58151.3 Rs. ha-1) and lowest with
control (44479.1 Rs. ha-1). The gross returns was maximum with GA3 at 200 ppm (1000000
Rs. ha-1) followed by GA3 at 100 ppm (970380 Rs. ha-1) and lowest with control (644940 Rs.
-1
-1
ha ). The net return was maximum with GA3 at 200 ppm (938900.0 Rs. ha ) followed by GA3
-1
-1
at 100 ppm (912228.7 Rs. ha ) and lowest with control (600460.9 Rs. ha ). The cost benefit
ratio was maximum with tricontanol at 1000 ppm (15.92) followed by tricontanol at 500 ppm
(15.76) and GA3 at 100 ppm (15.69) and lowest in control (13.50).
Table 20: Economic analysis of annual chrysanthemum seed production as influenced by different growth regulator spray
Total seed yield
(kg/ha)
Gross returns
(Rs./ha)
Net returns(Rs./ha)
Cost-benefit ratio
Control
322.47
44479.1
644940
600460.9
13.50
485.19
58151.3
970380
912228.7
15.69
500.00
61100.0
1000000
938900.0
15.37
457.28
54571.7
914560
859988.3
15.76
475.56
56215.9
951120
894904.1
15.92
420.00
51802.5
840000
788197.5
15.22
401.73
50730.5
803460
752729.5
14.84
MC @ 1000 ppm
447.16
54412.0
894320
839908
15.44
MC @2000 ppm
432.35
54231.1
864700
810468.9
14.94
Treatments
5. DISCUSSION
In seed production programme, the seed yield and quality are directly or indirectly
controlled by the environment under which crops are grown. In addition, genotype, soil,
cultural practices and their interactions also have profound influence on productivity of crops.
However, it is not possible to manipulate the environment for better crop growth, but one can
manipulate the micro climate of the field to certain extent by adopting suitable cultural
practices. Hence, an attempt has been made to increase the yield and quality of seed by the
way of manipulating cultivation practices like, spacing, fertilizer levels and growth regulator
spray to study its impact on yield and quality of seed in annual chrysanthemum. The results
obtained in the present investigation have been discussed in this chapter.
5.1
Similarly, flower dry weight increased significantly as spacing increased from S1 to S3.
The wider spacing S3 recorded maximum (0.620 g) flower dry weight compared S1 (0.496 g)
and S2 (0.550 g).
5.2
Influence of fertilizer
Application of adequate quantity of fertilizer to seed crop is most essential for better
crop growth and to obtain desired benefits in terms of higher seed yield and quality.
Generally, nitrogen enhances vegetative growth. While, phosphorous is a key nutrient
involved in various physiological processes, such as flowering and seed development.
Similarly, potassium is also involved in seed development.
5.3
plants for light and space which resulted in vertical growth of plant rather than horizontal
growth (branching). The results are in line with Belgoankar et al. (1996) in annual
chrysanthemum and Shivakumar (2000) in marigold.
The number of branches did not differ significantly however, relatively more with S3F3
at 30, 60 DAT and at harvest (5.00, 22.36 and 24.62, respectively) was recorded. The number
of leaves per plant differed significantly only at harvest. However, S3F3 recorded maximum
leaves per plant (84.67, 428.23 and 681.24). The leaf area per plant differed significantly at
30, 60 DAT and non significant at harvest. However, maximum leaf area 30, 60 DAT and at
harvest (432.13, 2620.68 and 3924.73 cm2) was recorded with the treatment S3F3. This
increase in leaf area might be due to lesser competition for light water and nutrients in wider
spacing and higher level of fertilizer which has played an important role for better vegetative
growth. Similar results were also reported by Belgoankar et al. (1996) in annual
chrysanthemum, Sodha and Dhahuk (2002) in golden rod, Rao et al. (1992) in
chrysanthemum and Jinendra (1997) in daisy. Days to 50 percent flowering differed
significantly and the treatment combination of S3F3 recorded minimum days (58.33) to 50 per
cent flowering.
Maximum flower diameter (5.58 cm) was recorded with treatment combination of
S3F3. The flower dry weight did not differed significantly, however maximum (0.660) flower dry
weight was recorded with the treatment combination of S3F3.
5.3.2 Interaction effect on seed yield and yield components
The number of flowers per plant is one of the important yield deciding component
which differed significantly by interaction of spacing and fertilizer levels. Significantly more
number of flowers in S3F3 (85.28) may be attributed to more branching of plant at which bears
more flowers. Similar results were also reported by Vijay kumar (1998) in china aster, Rao et
al. (1992) in chrysanthemum and Jitendra (1997) in daisy.
Other yield components like the number of seeds per capitulum differed significantly
and 1000 seed weight also differed due to interaction of spacing and fertilizer levels. The
number of seeds (256.97) per capitulum and 1000 seed weight (2.00 g) were higher in
treatment combination of S3F3 followed by S3F2 treatment combination.
The seed yield per plant increased linearly with the increased level of spacing from S1
to S3 in all the three fertilizer levels. Significantly more seed yield per plant (6.07 g) was
recorded in the treatment combination of S3F3. While lowest was with S1F1. The higher seed
yield was mainly due to higher number of flowers per plant, higher number of seeds per
capitulum and more 1000 seed weight. Similar observations were also reported by Hugar
(1997) in gaillardia and Shivakumar (2000) in china aster.
The seed yield per hectare was significantly differed due to interaction of spacing and
fertilizer levels. Significantly higher seed yield (478.89 kg) was recorded in the combination of
S1F3. Higher seed yield was due to optimum plant population per unit area and optimum
fertilizer levels might have resulted in better growth of the plant. Thus it indicated that S1F3 is
the best treatment combination for getting higher seed yield as compared to any other
combination. Similar results were also recorded by Hugar (1997) in gaillardia and Shivakumar
(2000) in china aster.
5.4
higher gross returns (9,58,520 Rs. ha-1) and net returns (9,01,351.2 Rs. ha-1) with cost benefit
ratio of (1:15.77). The least ratio was in S2F1 (1:11.89).
5.5
in china aster with GA3 spray; Karuppaiah et al. (2007) in radish due to tricontanol spray;
Samruban and Karuppaih, (2007) due to cycocel spray.
GA3 at 200 ppm spray recorded significantly less number of days (54.00) to 50 per
cent flowering while growth retardants took more number of days among chemicals cycocel at
2000 ppm (59.67) recorded maximum days to 50 per cent flowering followed by control
(70.81). Early flowering with GA3 spray may be due to increase in the endogenous
gibberellins levels in the plant, as gibberellins are well known for inducing early flowering in
several crop plants. The delayed flowering in the plants sprayed with growth retardants spray
may be due to reduced availability and synthesis of endogenous gibberellins. As the growth
retardants effectively reduce the availability of endogenous gibberellins by blocking their
synthesis (Dicks, 1976). Early flowering was reported by Sunita et al. (2007), Singh et al.
(1991) in African marigold with GA3 spray; The delay in flowering due to mepiquat chloride
and CCC compared to control which may be due to suppression of vegetative growth with
subsequent increase in number of flower bearing branches which perhaps need more days
for development and initiation of flowering. Similar results were noticed by Doddagoudar et al.
(2004) in china aster due to mepiquat chloride spray; Sanjeev kumar (2004) in china aster
due to cycocel spray.
In the present study, significantly higher seed yield per ha (500 kg) was recorded in
GA3 at 200 ppm as compared to control (322.47 kg). This increase in seed yield per ha could
be attributed to increase in yield attributes such as seed yield per plant, number of capitulum,
thousand seed weight and increase in growth parameters like number of branches per plant.
The above results are in conformity with the findings of Sunita et al. (2007) in marigold,
Kishan Swaroop et al. (2007) in African marigold with GA3 spray; Doddagoudar et al. (2004)
in china aster due to GA3 and mepiquat chloride spray; Hugar (1997) in gaillardia with CCC
spray.
5.6
4. The combination of 30x30 cm spacing coupled with 125: 187.5: 125 kg NPK per ha
gave higher seed yield with good quality and returns per rupee investment. Thus, it
would be economically beneficial for profitable seed production in annual
chrysanthemum.
5. In order to get higher seed yield GA3 at 200 ppm spray at 30 and 45 days after
transplanting can be taken up. Also other growth regulators GA3 at 100 ppm,
tricontanol at 1000, 500 ppm, mepiquat chloride at 1000 or 2000 ppm and cycocel at
1000 or 2000 ppm also gave higher seed yield with good quality.
6. Spraying with tricontanol at 1000 ppm, 500 ppm, GA3 at 100 ppm or 200 ppm gave
higher returns per rupee investment during annual chrysanthemum seed production.
6.1
The plant height decreased with the increase in spacing levels, while it increased with
the increase in fertilizer levels. The interaction of S1 (30x30 cm) at F3 (125: 187.5: 125 kg
NPK/ ha) recorded higher plant height.
Number of branches, number of leaves and leaf area per plant were maximum at S3
(30x60 cm) and these were also maximum at higher fertilizer level F3 (125: 187.5: 125 kg
NPK/ha). The number of branches, number of leaves and leaf area per plant were higher at
S3F3 (30x60 cm with 125: 187.5: 125 kg NPK/ ha) treatment combination.
50 per cent flowering was early in narrow spacing of S1 (30x60 cm) and also at F3
(125: 187.5: 125 kg NPK/ ha) level of fertilizer. Among the spacing and fertilizer interaction
S1F3 (30x60 cm with 125: 187.5: 125 kg NPK/ ha) recorded less number of days to 50 per
cent flowering.
The number of flowers per plant and flower diameter increased significantly. Wider
spacing of S3 (30x60 cm) recorded maximum number of flowers per plant and diameter
followed by S2 (30x45). While, fertilizer level F3 (125: 187.5: 125 kg NPK/ ha) recorded
maximum number of flowers per plant and diameter. The interaction of S3 F3 recorded higher
number of flowers per plant and diameter followed by S3F2 and S2F3.
The seed yield attributes were markedly more and seed yield per plant was
significantly more with wider spacing of S3 (30x60 cm). It was also highest at fertilizer level F3
(125: 187.5: 125 kg NPK/ ha). The treatment combination of S3F3 recorded maximum seed
attributes and seed yield per plant followed by S3F2.
The seed yield per hectare was significantly more with S1 (30x30 cm). Among the
fertilizer levels F3 (125: 187.5: 125 kg NPK/ ha) recorded higher seed yield per hectare and
the interaction of S1F3 recorded higher seed yield followed by S1F2.
The seed quality parameters like germination, seedling length, seedling vigour index,
seedling dry weight and lower electrical conductivity was recorded in wider spacing of S3
(30x60 cm). Among the fertilizer levels F3 (125: 187.5: 125 kg NPK/ ha) recorded maximum
values for the seed quality parameters with lower electrical conductivity. The treatment
combination of S3F3 recorded maximum seed quality parameters with lower electrical
conductivity followed by S3F2.
In terms of cost benefit ratio the spacing 30x30 cm spacing coupled with 125: 187.5:
125 kg NPK/ ha recorded more cost of cultivation, gross and net returns and cost benefit ratio
as compared to any other treatment.
6.2
Growth regulators
Spraying of GA3 at 200 ppm significantly increased plant height followed by GA3 at
100 ppm and tricontanol at 1000 and 500 ppm spray. On the contrary growth retardants
mepiquat chloride at 1000 and 2000 ppm and cycocel at 1000 and 2000 ppm decreased
plant height.
Spraying of GA3 at 200 ppm significantly increased the number of branches,
number of leaves and leaf area per plant followed by GA3 at 100 ppm, tricontanol at 1000
and 500 ppm. Among the growth retardants mepiquat chloride at 1000 ppm recorded more
number number of branches, number of leaves and leaf area per plant followed by mepiquat
chloride 2000 ppm, CCC 1000 and 2000 ppm compared to control.
Spraying of GA3 at 200 ppm induced early flowering followed by GA3 at 100 ppm,
tricontanol at 1000 and 500 ppm. On the contrary the growth retardants mepiquat chloride at
1000 and 2000 ppm and CCC 1000 and 2000 ppm delayed flowering compared to the
growth GA3 and tricontanol.
Spraying of GA3 at 200 ppm significantly increased the number of capitulum per
plant, capitulum diameter, number of seed per capitulum, dry weight of capitulum, 1000
seed weight and seed yield (per plant and per ha) compared to control.
Similarly tricontanol at 1000 and 500 ppm, mepiquat chloride at 1000 and 2000 ppm
and cycocel at 1000 and 2000 ppm also significantly improved the number of capitulum per
plant, capitulum diameter, dry weight of capitulum, 1000 seed weight and seed yield (per
plant and per ha) compared to control.
The seed quality parameters such as germination percentage, seedling length and
vigour index and seedling dry weight were higher with lower electrical conductivity was
recorded with GA3 at 200 ppm followed by GA3 at 100 ppm and tricontanol at 1000 ppm and
500 ppm. Among the growth retardants, mepiquat chloride at 1000 ppm recorded
significantly more germination percentage, seedling length and vigour index and seedling
dry weight with lower electrical conductivity followed by mepiquat chloride at 2000 ppm,
cycocel at 1000 and 2000 ppm.
The cost of cultivation, gross returns and net returns were higher with GA3 at 200
ppm, where as higher cost benefit ratio was recorded with tricontanol 1000 ppm followed by
tricontanol 500 ppm.
REFERENCES
Abdul Baki, A. A. and Anderson, J. D., 1973, Vigour determination in soybean by multiple
criteria. Crop Sci., 13: 630-633.
Acharya, M. M. and Dashora, L. K., 2004, Response of graded levels of nitrogen and
phosphorus on vegetative growth and flowering in African marigold. J. Orn.
Hort., 7(2): 179-183.
Acharya, M. M. and Dashora, L. K., 2004, Response of graded levels of nitrogen and
phosphorus on vegetative growth and flowering in African marigold. J. Orn.
Hort., 7(2): 179-183.
Agarwal, S., Agarwal, N., Dixit, A. and Yadav, R. N., 2002, Effect of N and K2O on African
marigold in Chattisgarh region. J. Orn. Hort., New Series, 5(10): 86.
Ajay, C. and Vijay, K., 2007, Effect of graded levels of nitrogen and VAM on growth and
flowering in calendula (Calendula officianalis Linn.). J. Orn. Hort., 10(1): 6163.
Akkannavar, B. R., 2001, Influence of nitrogen, phosphorus, spacing and growth retardants
on seed yield and quality of ageratum. M.Sc. (Agri.) Thesis, Univ. Agril. Sci.,
Dharwad, Karnataka (India).
Aliyu, U., Dikko, A. U., Magaji, M. D. and Singh, A., 2008, Nitrogen and intra-row spacing
effects on growth and yield of onion (Allium cepa L.). J. Plant Sci., 3(2): 188193.
Amandeep K., Parmar, U. and Singh, P., 2004, Efficacy of mepiquat chloride as foliar
application at three stages of groundnut (Arachis hypogaea L.) cv. M-335,
Environ. Ecol., 22(4): 783-786.
Anju, P. and Pandey, A. K., 2007, Effect of plant spacing on growth and flowering in African
marigold (Tagetes erecta L.) under Budnelkhand region. Prog. Res., 2(1/2):
70-72.
Anonymous, 1996, International Rules for Seed Testing. Seed Sci. and Technol., 24: 1-335.
Anonymous, 2004, Statistical Data on Horticultural Crops in Karnataka State, by Department
of Horticulture, Lalbagh, Bangalore.
Anuradha, K., Pampapathy, K. and Narayana, N., 1990, Effect of nitrogen and phosphorus on
flowering, yield and quality of marigold. Indian J. Hort., 47: 353-357.
Arulmozhiyan, R. and Pappaiah, C. M., 1989, Studies on the effect of nitrogen, phosphorus
and ascorbic acid on the growth and yield of marigold (Tagetus erecta L.) cv.
MDU-1. South Indian Hort., 37: 169-172.
Arvinda Kumar, B. N., Ashok S. Halepyati, Desai, B. K., Koppalkar, B. G. and Pujari, B. T.,
2002, Response of Indian mustard to foliar nutrition. Karnataka J. Agric. Sci.,
15(3): 573-574.
Aswath, S., Narayana Gowda, J. V. and Anand Murthy, G. M., 1994, Effect of growth
retardants on growth, flowering and nutrients content in china aster
[Callistephus chinensis (L.) Nees.] cv. Powder Fat Mixed. J. Orn. Hort.,
2(102): 9-13.
Baboo, R. and Sharma, K. S. K., 1997, Effect of nitrogen and potash fertilization on growth
and flowering of annual chrysanthemum (Chrysanthemum coronarium). J.
Orn. Hort., 5(1-2): 44-45.
Baboo, R. and Singh, M. K., 2003, Response of graded levels of nitrogen and phosphorus on
growth and flowering in African marigold. J. Orn. Hort., 6(4): 400-402.
Bagewadi, P. C., Ramaiah, H., Krishnappa, N., Lokesh, K., Balakrishna, P. and Prashant
Shankhinamath, 2003, Effect of nutrition and seasons on seed pod yield and
yield attributing characters in groundnut (Arachis hypogaea L.). Res. Crops,
4(3): 317-321.
Balachandra, R. A., Deshpande, V. K. and Shekhargouda, M., 2004, Effect of growth
regulators on seed yield and quality of ageratum. Karnataka J. Agric. Sci.,
17(1): 110-111.
Baskaran, V. and Misra, R. L., 2007, Effect of plant growth regulators on growth and
flowering of gladiolus. Indian J. Hort., 64(4): 479-482.
Belgoankar, D. V., Bist, M. A. and Wakde, M. B., 1996, Effect of levels of nitrogen and
phosphorus with different spacings on growth and yield of annual
chrysanthemum. J. Soils Crops, 6(2): 154-158.
Brar, Z. S., Mathauda, S. S., Parminder kaur and Navtej singh, 2002, Growth and yield of
cotton as influenced by dose and time of application of Mepiquat chloride. J.
Res. Punjab Agric. Univ., 39(4):476-478.
Chandrappa, Narayana Gowda, J. V., Chandre Gowda, M. and Mallikarjuna Gowda, A. P.,
2006, Influence of growth regulators and their combinations on growth and
flower production in anthurium cv. Royal Red. Research on Crops, 7(1): 279281.
Channabasavanna, A. S. Nagappa, and Biradar, D. P., 2008, Productivity and economic
analysis of ajowan as influenced by spacing and fertilizer levels. Karnataka J.
Agric. Sci., 21(1): 106-107.
Channakeshav, B. C., Rama Prasanna, K. P. and Ramachandrappa, B. K., 1999, Effect of
plant growth regulators and micronutrients on seed yield and yield
components in African tall fodder maize (Zea mays L.). Mysore J. Agric. Sci.,
33:111-114.
Chaudhary, V. R., Jitendra Kumar, Yeshpal Singh, Singh, R. K. and Ram Prakash, 2007,
Effect of plant spacing on growth and flowering of zinnia (Zinnia elegans L.).
Asian J. Hort., 2(1): 242-243.
Cothren, J. T., 1979, Pix-A cotton growth regulators. Arkanas Farm Res., p. 5.
Dalvi, N. V., Rangwala, A. D. and Joshi, G. D., 2008, Effect of spacing and graded levels of
fertilizers on yield attributes of gladiolus. J. Maharashtra Agric. Univ., 33(2):
167-170.
Das, S. N., and Das, B. D., 1992, Effect of growth regulators on growth and flowering of day
lily (Hemerocallis aurantiaca). South Indian Hort., 40(1): 336-339.
De, L. C. and Dhimon, K. R., 1998, Effect of N, P and K on the production of cut flowers of
chrysanthemum cv. Chandrama under Tripura condition. Prog. Hort., 30(3-4):
111-114.
Devadanam, A., Shinde, B. N., Sable, P. B. and Vedpathak, S. G., 2007, Effect of foliar
application of plant growth regulators on flowering and vase life of tuberose
(Polianthes tuberosa L.). J. Soil and Crops, 17(1): 86-88.
Devidaya and Agarwal, S. K., 1998, Performance of sunflower hybrids as influenced by
organic manure and fertilizer. J. Oilseeds Res., 15: 272-279.
Dhaduk, B. K., Sunila Kumara, Alka Singh and Desai, J. R., 2007, Response of gibberellic
acid on growth and flowering attributes in anthurium (Anthurium andreanum
Lind.). J. Orn. Hort., 10(3): 187-189.
Dhall, R. K. and Sanjeev, A., 2004, Effect of tricontanol (vipul) on yield and yield attributing
characters of tomato (Lycopersicon esculentum Mill.). Environ. Ecol., 22(1):
64-66.
Dhatt, K. K. and Ramesh kumar, 2007, Effect of planting time and spacing on plant growth,
flowering and seed yield in Coreopsis lanceolata and Coreopsis tinctoria. J.
Orn. Hort., 10(2): 105-109.
Dhatt, K. K. and Ramesh Kumar, 2008, Effect of planting time and planting density on plant
growth and seed yield of Gaillardia aristata. Environ. Ecol., 26(3A): 13141317.
Dicks, J. W., 1976, Chemical restriction of stem growth in ornamentals. Outlook on
Agriculture, 9: 69-75.
Doddagoudar, S. R., 2000, Effect of mother plant nutrition and chemical spray on seed yield
and quality of china aster (Callistephus chinensis Nees.). M.Sc. (Agri.)
Thesis, Univ. Agril. Sci., Dharwad, Karnataka (India).
Doddagoudar, S. R., Vyakaranahal, B. S. and Shekhargouda, M., 2004, Effect of mother plant
nutrition and chemical spray on seed germination and seedling vigour index
of china aster cv. Kamini. Karnataka J. Agric. Sci., 17(4): 701-704.
Doddagoudar, S. R., Vyakaranahal, B. S., Shekhargouda, M., Naliniprabhakar, A. S. and
Patil, V. S., 2002, Effect of mother plant nutrition and chemical spray on
growth and seed yield of china aster cv. Kamini. Seed Res., 30(2): 269-274.
Dongre, G. N., 1984, Standardization of horticultural practices for commercial production of
marigold (Tagetes erecta L.). M.Sc. (Agri.) Thesis, Univ. Agril. Sci.,
Bangalore, Karnataka (India).
Elkoca, E. and Kantar, F., 2006, Response of pea (Pisum sativum L.) to mepiquat chloride
under varying application doses and stages. J. Agron. Crop Sci.. 192(2): 102110.
El-Shahawy, M. I. M., 2000, Attempts to control excessive vegetative growth of cotton.
Egyptian J. Agril. Res., 78(3): 1181-1193.
Eriksen, A. B., Haugstad, M. K. and Nilsen, S., 1982, Yield of tomato and maize in response
to foliar and root applications of tricontanol. Plant Growth Regulation, 1(1):
11-14.
Gasti, V. D., 1994, Response of commercial vegetable to growth retardants. M. Sc. (Agri.)
Thesis, Univ. Agril. Sci., Dharwad, Karnataka (India).
Gaur, S. L., Bangar, A. R. and Kadam, S. K., 1987, Effect of growth regulators with different
levels of P on the yield and oil content in safflower. Current Research
Reporter, Mahatma Phule Agricultural University, 3(1): 75-76.
Gaurav, S. and Prabhakar S., 2007, Response of N, P and K on vegetative growth, flowering
and corm production in gladiolus under mango orchard. J. Orn. Hort., 10(1):
52-54.
Gnyandev, B., 2006, Effect of pinching, plant nutrition and growth retardants on seed yield,
quality and storage studies in china aster (Callistephus chinensis (L.) Nees.).
M.Sc. (Agri.) Thesis, Univ. Agril. Sci., Dharwad, Karnataka (India).
Goyal, R. K. and Gupta, A. K., 1996, Effect of growth regulators on growth and flowering of
rose cv. Super Star. Haryana J. Hort. Sci., 25(4): 183-186.
Gunasekaran, N. and Shanmugavelu, K. G., 1983, Studies on the effect of tricontanol on
tomato. Proceedings of National Seminar on the Production Technology of
Tomato and Chillies, pp. 75-85.
Hilli, J. S., Vyakaranahal, B. S. and Biradar, D. P., 2008, Influence of growth regulators and
stages of spray on seed quality of ridge gourd (Luffa acutangula L. Roxb).
Karnataka J. Agric. Sci., 21(2): 194-197.
Hugar, A. H., 1997, Influence of spacing, nitrogen and growth regulator on growth, flower
yield and seed yield in gaillardia (Gaillardia pulchella). Ph.D Thesis, Univ.
Agril. Sci., Dharwad, Karnataka (India).
Jackson, M. L., 1967, Soil Chemical Analysis. Prentice Hall of India Pvt. Ltd., New Delhi, pp.
38-82.
Jana, B. K. and Pal, A., 1991, Response of nitrogen and phosphorus on growth, flowering and
seed yield of cosmos (Cosmos sulphureus) cv. Super Sunset. Indian Agril.,
35: 113-118.
Jankiram, J. and Rao, T. M., 1995, Preliminary studies on genetic parameters as affected by
plant density in marigold. J. Orn. Hort., 3(1-2): 45-48.
Jayanthi, R. and Gowda, J. V. N., 1988, Effect of nitrogen and phosphorus on growth and
flowering of chrysanthemum, cv. Local White. Curr. Res., 17:
104-106.
Jitendra, K. K., 1997, Effect of plant density and nitrogen nutrition on growth, yield and quality
of daisy (Aster ameller L.). M.Sc. (Agri.) Thesis, Univ. Agril. Sci., Dharwad,
Karnataka (India).
John, A. G. and Paul, T. M., 1995, Influence of spacing and pinching treatments on growth
and flower production in chrysanthemum (Chrysanthemum morifolium cv.
Fruit). Prog. Hort., 27(1-2): 57-61.
John, A. Q., Mir, M. M., Bhat, Z. A. and Nelofar, 2008, Effect of planting time and density on
growth and bulb production in tulip cv. Alepdron. Indian J. Hort., 65(4): 466470.
Kadam, N. D., Patil, G. D., Chougule, B. A. and Kadam, S. S., 1988, Effects of foliar
application of Vipul on yield, soluble protein, total protein and nitrate
reductase activity in spinach. Indian j. pl. physiol., 31(1): 123-125.
Kanna Babu, N., Vyakaranahal, B. S., Shashirdhar, S. D. and Giriraj, 1993, Effect of plant
densities on seed quality in parental lines of BSH-1 hybrid and cv. Modern of
sunflower. Karnataka J. Agric. Sci., 6(1): 33-36.
Karavadia, B.N. and Dhaduk, B. K., 2002, Effect of spacing and nitrogen on annual
chrysanthemum (Chrysanthemum coronarium) cv. Local white. J. Orn. Hort.,
New Series, 5(1): 65-66.
Kareekatti, S. R., 1996, Effect of growth regulators on growth and yield of safflower
(Carthamus tinctorius L.) genotype. M. Sc. (Agri.) Thesis, Univ. Agril. Sci.,
Dharwad, Karnataka (India).
Karuppaiah, P. and Krishna, G., 2005, Response of spacing and nitrogen levels on growth,
flowering and yield characters of French marigold (Tagetes patula Linn.). J.
Orn. Hort., 8(2): 96-99.
Karuppaiah, P., Kumar, S. R. and Sandhilnathan, R., 2007, Effect of growth regulators on
and quality of pumpkin cv. Arka Chandan. Karnataka J. Agric. Sci., 21(1):
115-117.
Mantur, S. M. and Sateesh, R. Patil, 2008, Influence of spacing and pruning on yield of
tomato grown under shade house. Karnataka J. Agric. Sci., 21(1): 97-98.
Mantur, S. M., 1988, Studies on nutrition, growth regulators and soil salinity on flower and
seed production in china aster. Ph.D Thesis, Univ. Agril. Sci., Dharwad,
Karnataka (India).
Maurya, R. P. and Nagada, C. L., 2002, Effect of growth substances and flowering of
gladiolus (Gladiolus grandiflorus L.) cv. Friendship. Haryana J. Hort. Sci.,
31(3-4): 203-204.
Mc Connel, J. S., Baker, W. H., Frizell, B. S. and Yarnic, J. J., 1992, Response of cotton to
nitrogen fertilization and early multiple applications of mepiquat chloride. J.
Pl. Nut., 15: 457-468.
Mekki, B. B. and El-Kholy, M. A., 1999, Response of yield, oil and fatty acid contents in some
oil seed rape varieties to mepiquat chloride. Bulletin of the National Research
Centre Cairo, 24(3): 287-299.
Miniraj, M. and Shanmugavel, K.G., 1987, Studies on the effect of tricontanol on growth
flowering, yield, quality and nutrient uptake in chillies (Capsicum annuum L.).
South Indian Hort., 35(4): 362-366.
Mishra, H. P. 1998, Effect of nitrogen and planting density on growth and flowering of
gaillardia. J. Orn. Hort., 1(2):41-47.
Mohanty, C. R., Mishra, N. K. and Padmaja Patnaik, 2002, Effect of nitrogen and phosphorus
on flower production in marigold. J. Orn. Hort., New Series, 5(1): 67-68.
Mokashi, V. A., 1988, Effect of density and levels of nitrogen and phosphorus on growth and
flower yield of gaillardia. M.Sc. (Agri.) Thesis, Univ. Agril. Sci., Dharwad,
Karnataka (India).
Muralidharan, R., Saravanan, A. and Muthuvel, P., 2000, Influence of biostimulants on yield
and quality of tomato. Madras Agric. J., 87(10/12):625-628.
Muralidharan, R., Saravanan, A. and Muthuvel, P., 2002, Effect of plant growth regulators on
yield and quality of chilli (Capsicum annuum Linn.). South Indian Hort.,
50(1/3): 254-257.
Nagarjuna, B., Reddy, V. P., Rao, M. R. and Reddy, E. N., 1988, Effect of growth regulators
and potassium nitrate on growth, flowering and yield of chrysanthemum
(Chrysanthemum indicum L.). South Indian Hort., 36: 136-140.
Nalwadi, U. G., 1982, Nutritional studies in some varieties of marigold (Tagetes erecta L.)
Ph.D Thesis, Univ. Agril. Sci., Bangalore, Karnataka (India).
Narayanagouda, J. V. and Jayanthi, R., 1991, Effect of cycocel and maleic hydrazide on
growth and flowering of African marigold. Prog. Hort., 23(1-4):
114-118.
Narayanagouda, J. V., 1985, Investigation of horticultural practices in the production of china
aster (Callistephus chinensis Nees.). Ph.D Thesis, Univ. Agril. Sci.,
Bangalore, Karnataka (India).
Narayanagowda, J. V, Nanjegowda, V. and Chandregowda, M., 1996, Effect of cycocel and
maleic hydrazide spray on flowering and seasonal pattern of yield in Gundu
mallige (Jasminum sambau AIT). Prog. Hort., 28(1-2): 19-22.
Neelima, A., Archana Bansal and Jagmeet Kaur, 2005, Effect of mepiquat chloride and
gibberellic acid (GA3) on the yield attributes of soybean (Glycine max (L.)
Merril.). J. Punjab Agric. Univ., 42(1): 56-61.
Noggle, G. R. and Fritz, J. G., 1979, Introductory Plant Physiology. Prentice Hall of India Pvt.
Ltd., New Delhi, pp: 43-49.
Pandita, M. L., Sharma, N. K. and Arora, S. K., 1991, Effect of mixtalol and Vipul on growth,
flowering and yield of okra (Abelmoschus esculentus L. Moench.). Veg. Sci.,
18(1): 32-40.
Panwar, R. D., Sindhu, S. S., Sharma, J. R. and Saini, R. S., 2006, Effect of gibberellic acid
spray on growth, flowering, quality and yield of bulbs in tuberose. Haryana J.
Hort. Sci., 35(3/4): 253-255.
Parmar, A. S. and Singh, S. N., 1983, Effect of plant growth regulators on growth and
flowering of marigold (Tagetes erecta). South Indian Hort., 1: 53-54.
Parminder Kaur and Sidhu, M. S., 2007, Response of Ethiopian mustard (Brassica carinata A.
Br.) to mepiquat chloride and TIBA. Environ. Ecol., 25S(3A): 760-762.
Pawar, V. A., Naik, D. M. and Katkar, P. B., 2007, Effect of foliar application of growth
regulators on growth and yield of gaillardia (Gaillardia pulchella). South Indian
Hort., 53(1-6): 386-388.
Piper, C. S., 1996, Soil and Plant Analysis. Academic Press, New York, pp: 365.
Poonam, Ramesh, K. and Dubey, R. K. 2002, Effect of planting time and spacing on zinnia. J.
Orn. Hort., 5(2): 49-50.
Pourhadian, H. and Khajehpour, M. R., 2008, Effects of row spacing and planting density on
growth indices and yield of safflower, local variety of Isfahan "Koseh" in
summer planting. Journal of Science and Technology of Agriculture and
Natural Resources, 11(42(A)): 17-32.
Prabhat Kumar, Raghava, S. P. S., Mishra, R. L. and Krisna P. Singh, 2003, Effect of GA3 on
growth and yield of china aster. J. Orn. Hort, 6(2): 110-112.
Pranav Rana, Jitendra Kumar and Mukesh Kumar, 2005, Response of GA3, plant spacing
and planting depth on growth, flowering and corm production in gladiolus. J.
Orn. Hort., 8(1): 41-44.
Rajesh, T., 1995, Effect of growth regulators on growth and yield of calendula (Calendula
officinalis L.). (Agri.) Thesis, Univ. Agril. Sci., Bangalore, Karnataka (India).
Ramachandra, C., 1982, Studies on the effect of dates of planting with different levels of
nitrogen and phosphorus on growth and flower production of china aster
(Callistephus chinensis Nees.) cv. Ostrich Plume Mixed. M.Sc. (Agri) Thesis,
Univ. Agril. Sci., Bangalore, Karnataka (India).
Ramachandrudu, K. and Thangam, M., 2007, Effect of plant spacings on growth, flowering
and corm production in gladiolus. J. Orn. Hort., 10(1): 67-68.
Ramesh Kumar and Kiranjeet Kaur, 1996, Effect of nitrogen and phosphorus on plant growth,
pod number and seed yield in balsam (Impartiens balsamina L.). J. Orn.
Hort., 4(1-2): 23-26.
Ramesh Naik, Halepyati, A. S. and Pujari, B. T., 2008, Effect of organic manures and fertilizer
levels on seed yield and economics of safflower (Carthamus tinctorius L.).
Karnataka J. Agric. Sci., 21(1): 104-105.
Rao, D. V. R., Balasubramanyam, S. A., Balakrishna Reddy, K. and Suryanarayana, V., 1992,
Effect of different spacings and nitrogen levels on growth and flower yield of
chrysanthemum (Chrysanthemum indicum L.) cv. Kasturi. South Indian Hort.,
40(6): 323-328.
Rao, K. L. N., Reddy, P. J. R., Mahalakshmi, B. K. and Rao, C. L. N., 2005, Effect of plant
growth regulators and micronutrients on flower abortion, pod setting and yield
of chickpea. Annals Plant Physiol., 19(1): 14-16.
Ravindra, B. N., 1998, Effect of nitrogen, phosphorus and potassium on growth, yield and
quality of China aster (Callistephus chinensis Nees.) cv. Kamini. M.Sc. (Agri)
Thesis, Univ. Agril. Sci., Dharwad, Karnataka (India).
Ravindran, D. L. V., Rama Rao and Nagabushanum Reddy, 1986, Effect of spacing and
nitrogen levels on growth, flowering and yield of African marigold. South
Indian Hort., 34(5):320-323.
Ray, R. C., 1991, Effect of tricontanol on growth and yield of capsicum (Capsicum annuum
L.). Advan. Hort. Sci., 5(4): 153-156.
Rupinder Kaur and Ramesh Kumar, 1998, Effect of nitrogen, phosphorus and plant spacing
on seed yield on pansy (Viola tricolor L.) cv. Swiss Giant. J. Orn. Hort., New
Series, 1: 21-25.
Samruban, J. and Karuppaiah, P., 2007, Effect of plant growth regulators on growth and yield
of French marigold (Tagetes paluta L.). J. Asian Hort., 3(3):
162-165.
Samui, R. C. and Roy, A., 2007, Effect of growth regulators on growth, yield and natural
enemies of potato. J. Crop Weed, 3(1): 35-36.
Sandeep Tyagi, Tyagi, A. K., Vijai kumar and Nitin Kumar, 2008, Effect of GA and IAA on
growth, flowering and yield of calendula (Calendula officinalis L.). Prog.
Agric., 8(1): 118-120.
Satao, P. J., Pawar, P. M., Shinde, V. N., Damodhar, V. P. and Bhalerao, R. V., 2007, Effect
of bioenzymes on growth, flowering and yield of okra. Asian J. Hort., 2(1):
108-110.
Saud, B. K. and Ramachandra, 2004, Effect of fertilizer and spacing on French marigold
under southern Assam condition. Prog. Hort., 36(2): 282-285.
Sen, S. K. and Naik, T., 1977, Growth and flowering response of pinching and unpinched
chrysanthemum on growth regulator treatments. Indian J. Hort., 34: 86-90.
Shah, Y. A., Khan, F. U., Lone, R. A., Nanda, A. B. and Beigh, M. A., 2005, Effect of nitrogen
and spacing on growth and flowering in china aster. Prog. Hort., 37(2): 453455.
Shaikh, A. M., Vyakaranahal, B. S., Shekargouda, M. and Dharmatti, P.R., 2002, Influence of
bulb size and growth regulators on growth, seed yield and quality of onion cv.
Nasik Red. Seed Res., 30(2): 223-229.
Shanmugan, A. and Mutuswamy, S., 1974, Effect of CCC and TIBA on chrysanthemum.
Indian J. Hort., 31: 370-374.
Sharanabasappa, H., 1990, Studies on the effect of nitrogen and phosphorus on growth and
flower production of everlasting flower (Itelichrysum bracteatum Andi.) cv.
Tall Double Mixed. M.Sc. (Agri) Thesis, Univ. Agril. Sci., Dharwad, Karnataka
(India).
Sharma, D. P., Sharma, T. R., Agarwal, S. B. and Rawat, A., 2005, Effect of pinching and
tricontanol on growth and yield of African marigold. JNKVV Res. J., 39(1):
108-109.
Sharma, S. K., 1995, Response of tricontanol application on certain morphological characters,
fruit and seed yield and quality of tomato seed. Ann. Agric. Res., 16(1): 128130.
Shivakumar, C. M., 2000, Effect of mother plant nutrition, plant density and seed maturity on
seed yield and quality in marigold (Tagetes erecta L.) M.Sc. (Agri) Thesis,
Univ. Agril. Sci., Dharwad, Karnataka (India).
Shivanna, M., 1994, Effect of spacing, pinching and nutrition on growth and flowering of
chrysanthemum. M.Sc. (Agri) Thesis, Univ. Agril. Sci., Bangalore, Karnataka
(India).
Shivapradad Shetty, 1995, Effect of GA3 and cycocel on maturity, seed yield and quality in
china aster (Callistephus chinensis L. Nees). M.Sc. (Agri) Thesis, Univ. Agril.
Sci., Bangalore, Karnataka (India).
Shreedhar, D., 1993, Effect of growth regulators on growth and flower yield of gaillardia
(Gaillardia pulchella fouger.) cv. Khanabargi local. M.Sc. (Agri) Thesis, Univ.
Agril. Sci., Dharwad, Karnataka (India).
Sigedar, P. D., Answerwadekar, K. W. and Rodge, B. M., 1991, Effect of different levels of
NPK or growth and yield of Calendula officinalis Linn. South Indian Hort., 39:
308-311.
Singh, A. K. and Bijimol, G., 2001, Influence of growth regulating chemicals on growth,
flowering and bulb production in tuberose (Polianthes tuberosa L.). Indian
Perfum., 45(1): 31-34.
Singh, A. K., 2004, Plant growth and flower production in rose as influenced by CCC, TIBA
and SADIA spraying. Prog. Hort., 36(1): 40-43.
Singh, K. P. and Sangama, 2000, Effect of graded level of N and P on china aster cultivar
Kamini. Indian J. Hort., 57(1): 87-89.
Singh, K. P., 1996, Effect of spacing on growth and flowering in tuberose (Polianthes
tuberosa Linn) cultivar shringar. Haryana J. Hort. Sci., 53(1): 76-79.
Singh, M. K. and Baboo, R., 2003, Response of nitrogen, potassium and pinching levels on
growth and flowering in chrysanthemum. J. Orn. Hort., 6(4): 390-393.
Singh, M. K., Sanjay Kumar and Raja Ram, 2008, Effect of nitrogen and potassium on
growth, flowering and bulb production in Asiatic hybrid lily cv. Novecento. J.
Orn. Hort., 11(1): 45-48
Singh, M. P., Singh, R. P. and Singh, G. N., 1991, Effect of GA3 and ethrel on the growth and
flowering of African marigold (Tagetes erecta L.). Haryana J. Hort. Sci., 20:
81-84.
Snedecor, G. and Cochran, W. G., 1967, Statistical Methods, Oxford and IBH Publishing
Company, Bombay, pp. 135-197.
Sodha, B. P. and Dhaduk, B. K., 2002, Effect and spacing and nitrogen on solid ago (Golden
rod). J. Orn. Hort., 5(1):63-64.
Srikanth, Merwade, M. N., Channaveerswami, A.S., Shantappa Tirakannanvar, Mallapur, C.P.
and Hosmani, R. M., 2008, Effect of spacings and fertilizer levels on crop
growth and seed yield in lablab bean (Lablab purpureus L.). Karnataka J.
Agric. Sci., 21(3): 194-197.
Srivastava, S. K., Singh, H. K. and Srivastava, A. K., 2002, Effect of spacing and pinching on
growth and flowering of Pusa Narangi Gainda marigold (Tagetes erecta L.).
Indian J. Agric. Sci., 72(1): 611-612.
Stanley, R. and Robert, H., 1983, Tricontanol as a plant growth regulator. Hort Science,
18(5): 654-662.
Subbaiah, B. V. and Asija, G. L., 1956, A rapid procedure of the estimation of available
nitrogen in soils. Current Sci., 25: 252-260.
Sujatha, A. Nair, Vijai Singh and Sharma, T. V. R. S., 2002, Effect of plant growth regulators
and quality of gerbera under by island conditions. Indian J. Hort., 59(1): 100105.
Sundarajan, N., Nagaraju, S., Venkataraman, S. and Jaganath, M. H., 1972, Design and
Analysis of Field Experiment, Univ. Agril. Sci., Hebbal, Bangalore.
Sunitha, H. M., 2006, Effect of plant population, nutrition and growth regulators onplant
growth, seed yield and quality of African marigold (Tagetes erecta Linn.).
M.Sc. (Agri) Thesis, Univ. Agril. Sci., Dharwad, Karnataka (India).
Syamal, M. N., Rajput, C. B. S., Upadhyay, R. K. and Singh, J. N., 1990, Effect of GA3 and
MH on growth, flowering and seed yield of marigold and china aster. Indian J.
Hort., 47: 439-441.
Tan, M. and Temel, S., 2005, Effect of Mepiquat chloride, a growth retardant on seed yield
and yield components in common vetch (Vicia sativa). Indian J. Agric. Sci.,
75(3): 160-161.
Tripathi, D.K., Lallu, Chandra Bushan and Baghel, R. S., 2007, Effect of some growth
regulators on flower drop and yield of chickpea. J. Food Legum., 20(1): 117118.
Tripathi, P. N. and Kalra, G. S., 1981, Effect of NPK on maturity and yield of sunflower. Indian
J. of Argon., 26: 66-70.
Ujjinaiah, U. S., 1985, Effect of different levels of nitrogen and spacing on production and
quality of hybrid seeds in BSH-1 sunflower. M.Sc. (Agri) Thesis, Univ. Agril.
Sci., Bangalore, Karnataka (India).
Umrao, V. K., Vishal Sharma and Baldev Kumar, 2007, Influence of gibberellic acid spraying
on gladiolus cv. Rose Delight. Prog. Agric., 7(1/2): 187-188.
Venkatesh, A. R., 1983, Effect of different levels of NPK on growth, yield and quality of china
aster (Callistephus chinensis). M.Sc. (Agri) Thesis, Univ. Agril. Sci.,
Bangalore, Karnataka (India).
Venugopal, C. K., 1991, Studies on the effect of plant dessity and nitrogen on growth and
flower production in everlasting flower (Helichrysum bracteatum Andr.) cv.
Tall Doubled Mixed. M.Sc. (Agri) Thesis, Univ. Agril. Sci., Dharwad,
Karnataka (India).
Vijay Kumar, K. T., 1988, Studies on the effect of plant density and nitrogen on growth and
flower production of china aster. M.Sc. (Agri) Thesis, Univ. Agril. Sci.,
Dharwad, Karnataka (India).
Vishnu Swarup, 1967, Garden flowers. National Book Trust, India. New Delhi.
Walter, H., Gausman, H. W., Ritting, F. R., Namken, L. N., Escobar, D. E. and Rodriguez, R.
R., 1980, Effect of mepiquat chloride on cotton plant leaf and canopy
structure and dry weights of its components in 1980. Betuside Cotton Prod.
Res. Con. Proc., UAS, National Cotton Council of America, pp. 32-35.
Yadav, L. P. and Bose, T. K., 1993, Influence of fertilization with nitrogen and phosphorus on
seed production in marigold. Haryana J. Hort. Sci., 22: 104-107.
Yadav, N., Tiwari, O. P. and Shrivastava, G. K., 1998, Influence of nitrogen and low spacing
with different inter crops for rice follows in sunflower. J. Oilseed Res., 15:
377-378.
Yassin, G. M. and Pappiah, C. M., 1990, Effect of pinching and manuring on growth and
flowering of chrysanthemum. South Indian Hort., 38: 232-233.
Yogananda, D. K., Vyakarnahal, B. S. and Shekhargouda, M., 2004, Effect of seed
invigouration with growth regulators and micronutrients on germination and
seedling vigour of bell pepper cv. California Wonder. Karnataka J. Agric. Sci.,
17(4): 811-813.
Zheng, G., Zheng, X., Jiao, X. Timm, H. Rappaport, L., 1986, The effect of tricontanol on the
growth and yield of some crops. Acta Hort. Sinica, 13(3): 197-202.
2009
Dr. D. S. UPPAR
Major Advisor
ABSTRACT
A field experiment was conducted at Main Agricultural Research Station, University of
Agricultural Sciences, Dharwad during kharif 2008 to study the influence of spacing, fertilizer
levels and growth regulators on growth, seed yield and quality in annual chrysanthemum
(Chrysanthemum coronarium L.) The experiment consisted of three spacing (S1-30x30, S230x45, S3-30x60) and fertilizer levels (F1-75:112.5:75, F2-100:150:100, F3-125:187.5:125 NPK
kg/ha). It was laidout in Randomized Block Design (RBD) with factorial concept having three
replications. The results indicated significantly higher plant height, number of branches, leaf
area/plant, flower diameter and dry weight, number of seeds/flower and seed yield/plant at S3
with F3. The seed quality parameters like thousand seed weight, germination percentage,
seedling length, vigour index and dry weight were also higher. However, seed yield ha-1, cost
-1
of cultivation, gross and net returns ha and cost benefit ratio were higher with S1 with F3.
The other experiment consisted of nine treatments viz., control, GA3 @ 100 ppm, GA3
@ 200 ppm, Tricontanol @ 500 ppm, Tricontanol @ 1000 ppm, Cycocel @ 1000 ppm,
Cycocel @ 2000 ppm, Mepiquat chloride @ 1000 ppm and Mepiquat chloride @ 2000 ppm
and was laidout in RBD with three replications. Foliar application of GA3 @ 200 ppm spray
recorded significantly higher plant height, number of branches, leaf area/plant, flower
diameter and dry weight, number of seeds/flower, seed yield/plant and ha-1. Among seed
quality parameters, thousand seed weight, germination percentage, seedling length, vigour
index and dry weight were also higher, it also recorded higher cost of cultivation, gross and
-1
net returns ha , but the cost benefit ratio was highest in Tricontanol 1000 ppm.
Based on the results it can be concluded that the combination of 30x60 cm with
125:187.5:125 NPK kg and GA3 200 ppm is optimum for getting higher seed yield and quality
in annual chrysanthemum.