Documente Academic
Documente Profesional
Documente Cultură
commit ?
Execute this command
Quit configuration mode if commit succeeds
Time at which to activate configuration changes
Check correctness of syntax; do not apply changes
Message to write to commit log
Automatically rollback if not confirmed
Synchronize commit on both Routing Engines
Pipe through a command
commit confirmed ?
Execute this command
Number of minutes until automatic rollback (1..65535)
Quit configuration mode if commit succeeds
Message to write to commit log
Synchronize commit on both Routing Engines
Pipe through a command
[edit]
shrirang.mulay@scoir4# exit
Exiting configuration mode
////////////////////////////////////////////////////////////////////////////////
//////////////////////////////
Downgraded OS of RE1 on torpr4
show c//////////////////////////////////////////////////////////////////////////
////////////////////////////////////
request routing-engine login other-routing-engine
root> show chassis hardware
Aborted! This command can only be used on the master routing engine.
file list /var/tmp
/var/tmp:
gres-tp/
idp_license_info
install/
jbundle-9.5R1.8-domestic.tgz*
jinstall-8.1-20071208.0-domestic-signed.tgz
sec-download/
vi.recover/
request system software add /var/tmp/jinstall-8.1-20071208.0
shrirang.mulay@torpr4# commit synchronize ?
Possible completions:
<[Enter]>
Execute this command
and-quit
Quit configuration mode if commit succeeds
at
Time at which to activate configuration changes
comment
Message to write to commit log
|
Pipe through a command
[edit]
shrirang.mulay@torpr4# commit synchronize comment ?
Possible completions:
<comment>
Message to write to commit log
[edit]
shrirang.mulay@torpr4# commit synchronize comment CHG441348
re0:
configuration check succeeds
re1:
commit complete
re0:
commit complete
set chassis redundancy grace full switch over
1) Request that Juniper onsite tech reseat RE1 on torpr4. Issue command show cha
ssis routing-engine to ensure the backup routing engine comes up properly. If it
does not, proceed to step 2.
2) Request that Juniper replace RE1. Issue command show chassis routing-engine t
o ensure the backup routing engine comes back up properly.
3) Copy code to RE1 as follows:
request system software add /var/tmp/jinstall-8.1-20071208.0-domestic-signed.tgz
re1 no-validate
4) Sync config to RE1:
edit exclusive
commit sync and-quit HD1942178
--------------------------------------------------------------------------------1. Log into the RE1 module
-----"request routing-engine login re1"
2. Copy the code version to the new RE0
-----"file copy re0:/var/tmp/jinstall-8.1-20071208.0-domestic-signed.tgz"
3. Load the new version
-----"request system software add /var/tmp/jbundle-8.5-20080209.0-domestic.tgz"
4. Reboot the new RE1 While Logged into RE1
-----"request system reboot"
5. Log into the RE0 module via console or request command
-----"request routing-engine login re1"
-----""show version"
6. On RE0 / master RE, check version to compare to the new RE
-----"show version"
7. Log into the RE1 module via console or request command
-----"request routing-engine login re1"
8. On RE1 check the version and ensure it matches RE0
-----"show version"
9. Exit RE0
-----"exit"
10. On RE0 copy and sync the configuration to RE1
-----"edit exclusive"
-----"commit synchronize and-quit"
///////////////////////////////////////////////////////////////////
shrirang.mulay@phlrr2> request routing-engine login other-routing-engine <<login
into BAckup RE>>
--- JUNOS 9.3R3.8 built 2009-05-12 22:35:00 UTC
shrirang.mulay@phlrr2> show system core-dumps
| file
|
shrirang.mulay@phlrr2> ...copy /var/crash/kernel.0 re0:/var/tmp/kernel.0 |
shrirang.mulay@phlrr2> exit <<Disconnected from Backup RE>>
rlogin: connection closed
shrirang.mulay@phlrr2> show system core-dumps
/var/crash/*core*: No such file or directory
-rw-r--r-- 1 admin wheel 94732288 Jul 4 02:25 /var/tmp/vmcore.0
/var/crash/kernel.*: No such file or directory
/tftpboot/corefiles/*core*: No such file or directory
total 1
shrirang.mulay@phlrr2> file list /var/tmp/ detail
ied to Master RE>>
/var/tmp/:
total 1088824
srw-rw---- 1
drwxrwxrwx 2
-rw-r--r-- 1
c.tgz
-rw-r--r-- 1
-rw-r--r-- 1
-rw-r--r-- 1
-rw-r--r-- 1
-rw-r----- 1
srwxr-xr-x 1
srwxr-xr-x 1
srwxr-xr-x 1
srwxr-xr-x 1
srwxr-xr-x 1
-rw-r--r-- 1
-rw-r--r-- 1
-rw-r--r-- 1
-rw-r--r-- 1
-rw-r--r-- 1
-rw-r--r-- 1
root operator
0 Oct 6 2009 .pccardd
root wheel
512 Jul 23 2008 install/
root wheel 90904511 Jul 23 2008 jbundle-8.2-20071208.0-domesti
root
admin
root
root
root
root
root
root
root
root
root
root
root
root
root
root
-rw-r--r--rw-r--r-drwxrwxrwT
-rw-r--r--
1
1
2
1
root
root
root
admin
wheel
wheel
wheel
wheel
0
0
512
94732288
Oct
Oct
Jul
Jul
8
8
23
4
2009
2009
2008
02:25
shm_ipc_sem_3
shm_ipc_sem_4
vi.recover/
vmcore.0
shrirang.mulay@phlrr2> exit
Connection to phlrr2 closed.
[shrirang.mulay@phlnu1 ~]$ ssh phlrr2
+==== SunGard Availability Services - unauthorized access prohibited ====+
shrirang.mulay@phlrr2's password:
--- JUNOS 9.3R3.8 built 2009-05-12 22:35:00 UTC
shrirang.mulay@phlrr2> scp ?
Possible completions:
<[Enter]>
Execute this command
<source>
Description of source file
|
Pipe through a command
shrirang.mulay@phlrr2> scp /var/tmp/vmcore.0 ?
Possible completions:
<[Enter]>
Execute this command
|
Pipe through a command
shrirang.mulay@phlrr2> scp /var/tmp/vmcore.0 shrirang.mulay@phlnu1:/var/tmp/vmco
re.0
^
syntax error.
shrirang.mulay@phlrr2>
Possible completions:
<[Enter]>
|
shrirang.mulay@phlrr2>
scp /var/tmp/vmcore.0 ?
Execute this command
Pipe through a command
exit