Documente Academic
Documente Profesional
Documente Cultură
ME 741: Properties
JT
Property Collector
In the previous lectures you looked at creating two
types of collectors in HyperMesh (Radioss):
component & material collector
In this class you will learn to create the property
collector in HyperMesh (Radioss)
Property collector is needed to define the crosssectional properties of the component meshed
Similar to material collector, the property collector
needs to be assigned to the component collector
whose cross-section has been defined by the
property collector
ME 741: Properties
JT
ME 741: Properties
JT
Property Collectors
for
1D Elements
ME 741: Properties
JT
PROD
Defines the cross-sectional properties of a rod or bar
Best to use for CROD elements
ME 741: Properties
JT
PBAR
Defines the cross-sectional properties of simple beam or bar or rod
Can be used for either CROD or CBEAM elements
Element
n2
n1
y
x
Element in 3D representation
(illustration purpose only)
ME 741: Properties
JT
PBARL
Defines the properties of simple beam, bar or rod by listing the crosssectional dimensions
Can be used for both CROD and CBEAM elements
ME 741: Properties
JT
PBARL Cross-Sections
ME 741: Properties
JT
PBARL Cross-Sections
ME 741: Properties
JT
PBEAM
Defines the cross-sectional properties of beam
Used for CBEAM elements
ME 741: Properties
JT
PBEAM
The parameters (2)-(8) are defined
similar to PBAR card
The end A (or a) is the starting end of
the element OR the end represented
by node n1
Similarly, end B (or b) is the end
represented by node n2
In order to output the stresses in the
beam elements, set SO parameter to
YES
The parameter I12 = I1*I2
For this card to work setting
parameters (2)-(8) is enough
ME 741: Properties
JT
PBEAML
Defines the properties of beam by inputting the cross-sectional dimensions
Used for CBEAM element
ME 741: Properties
JT
PBEAML Cross-Sections
ME 741: Properties
JT
PBEAML Cross-Sections
ME 741: Properties
JT
PBEAML Cross-Sections
ME 741: Properties
JT
Property Collector
for
2D (Shell) Elements
ME 741: Properties
JT
PSHELL
Defines the properties of a shell element
Best used for isotropic materials, but can also be assumed for orthotropic
materials
ME 741: Properties
JT
Property Collector
for
3D (Solid) Elements
ME 741: Properties
JT
PSOLID
Defines properties of solid
elements
For any solid element, this
is the only property card
available
The only parameters
needed are (2) and (3)
ME 741: Properties
JT