Documente Academic
Documente Profesional
Documente Cultură
40
Whats New?
No changes
Support of additional metering CT classes 2.4 and 4.8 following IEEE standard
Additional support of 8 IEC protection CT classes (2P/2PR 6P/6PR) within the Standard Package
Testing and assessment with burdens up to 400 VA (IEEE 57.13)
Testing and assessment with burdens below 1 VA
Additional polarity information for remanence measurements
Additional value for TPZ cores
1.1
Support of additional metering CT classes 2.4 and 4.8 following IEEE standard
The new CT Analyzer software version enables testing of the additional metering classes 2.4 and 4.8
according to the IEEE standard C57.13.
The new classes can be selected in the user interface (GUI) on the CT-Object card. Once the standard
IEEE C57.13 is selected and the CT type is defined as metering CT, the new classes can be selected from
the pre-configured menu.
These metering classes are not defined in the standard IEEE C57.13 itself but required in some cases
according to that standard.
1.2
1.3
1.4
When the new feature is enabled, it is possible to enter a burden value below 1 VA on the CT-Object card.
This is independent of the selected standard. The values below 1 VA are also added in the ratio table.
In addition, the new feature enables the assessment (100 % to 25 %) of CTs below 1 VA if for example the
value of 25 % of the rated burden is lower than 1 VA.
1.5
1.6
Americas
OMICRON electronics Corp. USA
3550 Willowbend Blvd.
Houston, TX 77054, USA
Phone: +1 713 830-4660
+1 800-OMICRON
Fax:
+1 713 830-4661
info@omicronusa.com
Asia-Pacific
OMICRON electronics Asia Limited
Suite 2006, 20/F, Tower 2
The Gateway, Harbour City
Kowloon, Hong Kong S.A.R.
Phone: +852 3767 5500
Fax: +852 3767 5400
info@asia.omicron.at
www.omicron.at www.omicronusa.com