Documente Academic
Documente Profesional
Documente Cultură
User manual
STM3210E-EVAL
evaluation board
Introduction
The STM3210E-EVAL evaluation board is designed as a complete development platform for
STMicroelectronic's ARM Cortex-M3 core-based STM32F103ZGT6 microcontroller with full
speed USB2.0, CAN2.0A/B compliant interface, two I2S channels, two I2C channels, five
USART channels with smartcard support, three SPI channels, two DAC channels, FSMC
interface, SDIO, internal 96 KB SRAM and 1 MB Flash, JTAG and SWD debug support.
The STM3210E-EVAL products delivered with the MB672 board versions D-03 or older are
based on the STM32F103ZET6 instead of the STM32F103ZGT6 and include 64 KB internal
SRAM and 512 KB Flash. The board number and version are on a label on the bottom side
of the board.
The full range of hardware features on the board helps you to evaluate all peripherals (USB,
motor control, CAN, MicroSD Card, smartcard, USART, NOR Flash, NAND Flash, SRAM)
and develop your own applications. Extension headers make it easy to connect a
daughterboard or wrapping board for your specific application.
Figure 1. STM3210E-EVAL evaluation board
August 2013
DocID14220 Rev 6
1/50
www.st.com
Contents
UM0488
Contents
1
2/50
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.1
Order code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.3
Demonstration software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.2
Boot option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.3
Clock source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.4
Reset source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.5
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
2.6
2.7
CAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
2.8
RS-232 connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.9
Motor control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.10
Smartcard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.11
MicroSD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.12
Temperature sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.13
Analog input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.14
IrDA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.15
USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.16
2.17
2.18
SRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2.19
NAND Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2.20
NOR Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3.1
3.2
3.3
DocID14220 Rev 6
UM0488
Contents
3.4
3.5
3.6
3.7
3.8
3.9
3.10
3.11
3.12
3.13
3.14
3.15
Schematic diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
DocID14220 Rev 6
3/50
3
List of tables
UM0488
List of tables
Table 1.
Table 2.
Table 3.
Table 4.
Table 5.
Table 6.
Table 7.
Table 8.
Table 9.
Table 10.
Table 11.
Table 12.
Table 13.
Table 14.
Table 15.
Table 16.
Table 17.
Table 18.
Table 19.
Table 20.
Table 21.
Table 22.
Table 23.
Table 24.
Table 25.
Table 26.
Table 27.
Table 28.
Table 29.
Table 30.
4/10
DocID14220 Rev 6
UM0488
List of figures
List of figures
Figure 1.
Figure 2.
Figure 3.
Figure 4.
Figure 5.
Figure 6.
Figure 7.
Figure 8.
Figure 9.
Figure 10.
Figure 11.
Figure 12.
Figure 13.
Figure 14.
Figure 15.
Figure 16.
Figure 17.
Figure 18.
Figure 19.
Figure 20.
Figure 21.
Figure 22.
Figure 23.
Figure 24.
Figure 25.
Figure 26.
Figure 27.
DocID14220 Rev 6
5/50
5
Overview
UM0488
Overview
1.1
Order code
To order the STM32F103ZGT6GT6 evaluation board, use the order code STM3210E-EVAL.
1.2
1.3
Features
64 or 128 Mbit serial Flash, 512 Kx16 SRAM, 512 Mbit or 1 Gbit NAND Flash and 128
Mbit NOR Flash
IrDA transceiver
4 color LEDs
Demonstration software
Demonstration software is preloaded in boards Flash memory for easy demonstration of the
device peripherals in stand-alone mode. For more information and to download the latest
version available, please refer to the STM3210E-EVAL demonstration software available
from www.st.com
To use the STM3210E-EVAL evaluation board, you must have the demonstration software
version 1.1 or later. If the version installed on your evaluation board is earlier than version
1.1, you must download the latest version from www.st.com.
6/50
DocID14220 Rev 6
UM0488
Audio DAC
3.3 V regulator
512 K x 16 SRAM
1 Gbit NAND
GPIO
FSMC
QST connector
STM32103Z
-&%T ,FZ+PZTUJDL
Extension connector
for GPIOs
TFT LCD
MicroSD card
Temperature sensor
USART 1
RS-232
transceiver
USART 1
DB9 connector
USART 2
RS-232
transceiver
USART 2
DB9 connector
USART 4
IrDA
transceiver
USART 1
DB9 connector
USART 3
SmartCard
interface
SmartCard
connector
CAN
CAN
transceiver
CAN
DB9 connector
ADC
3 BNC connectors
SPI1
MC
SDIO
I2C
JTAG
Debug
Potentiometer
Trace
USB
USB type B
connector
MS30067V1
DocID14220 Rev 6
7/50
49
UM0488
U1
STM32F103ZG
CN11
Extension connector
CN1
CN4
CAN
connector
CN2,3,5
CN6
QST
CN14
CN7
Trace
CN9
JTAG
CN8
U17
Color LCD
CN13
MicroSD
CN15
Audio jack
CN12
U13
CN17
RV1
Potentiometer
B1
RESET
8/50
B2
WAKEUP
CN18
Smartcard
B3
Tamper
DocID14220 Rev 6
U19
Joystick
B4
User key
UM0488
2.1
Power supply
The STM3210E-EVAL evaluation board is designed to be powered by 5V DC power supply
and to be protected by PolyZen U15 in the event of wrong power plug-in. It is possible to
configure the evaluation board to use any of following three sources for the power supply:
5V DC power adapter connected to CN17, the power jack on the board (PSU on silk
screen for power supply unit).
5V DC power with 500 mA limitation from CN14, the type-B USB connector (USB on
silkscreen).
5V DC power from both CN10 and CN11, the extension connector for daughterboard
(DTB for daughterboard on silkscreen).
The power supply is configured by setting the related jumpers JP13, JP12 and JP1 as
described in Table 1. The LED LD5 is lit when the STM3210E-EVAL evaluation board is
powered correctly.
Table 1. Power related jumpers
Jumper
Description
PSU
DTB
USB
JP13 is used to select one of the three possible power supply resources.
For power supply jack(CN17) to the STM3210E-EVAL only, JP13 is set
as shown (default setting).
JP13
JP12
JP1
PSU
DTB
USB
For power supply from power supply jack(CN17) to both STM3210EEVAL and daughterboard connected on CN10 and CN11, JP13 is set as
shown (daughterboard must not have its own power supply
connected).
PSU
DTB
USB
For power supply from USB (CN14) to STM3210E-EVAL only, JP13 is set
as shown.
PSU
DTB
USB
DocID14220 Rev 6
1 2 3
1 2 3
9/50
49
2.2
UM0488
Boot option
The STM3210E-EVAL evaluation board can boot from:
The boot option is configured by setting the switches BOOT0 and BOOT1.
Table 2. Boot related switches
Switch
Boot from
STM3210E-EVAL boots from User Flash when BOOT0 is set as
shown to the right. BOOT1 is not required in this configuration.
(Default setting)
BOOT0
BOOT1
Switch
configuration
Boot 0
0<
>1
Boot 0
Boot 1
0<
>1
Boot 0
Boot 1
0<
2.3
>1
Clock source
Two clock sources are available on the STM3210E-EVAL evaluation board for STM32F103
and RTC.
2.4
X1, 8MHz crystal with socket for STM32F103ZGT6 microcontroller, it can be removed
from socket when internal RC clock is used.
Reset source
The reset signal of the STM3210E-EVAL evaluation board is low active and the reset
sources include:
Reset button B1
Debugging tools from JTAG connector CN7 and trace connector CN9
JP19
10/50
Description
Enables reset of the STM32F103ZGT6 embedded JTAG TAP controller each time a
system reset occurs. JP19 connects the TRST signal from the JTAG connection with the
system reset signal RESET#. Default setting: not fitted
DocID14220 Rev 6
UM0488
2.5
Audio
The STM3210E-EVAL evaluation board supports stereo audio play because it provides an
audio DAC AK4343 connected to both I2S port and two channels of DAC of microcontroller
STM32F103ZGT6. Either external slave mode or PLL slave mode (reference clock BICK or
LRCK) of audio DAC can be used by setting the jumper JP18.
The I2S_MCK is multiplexed with smartcard and motor control, and can be enabled by
setting the jumper JP15. Refer to Section 2.9: Motor control for details. Audio DAC AK4343
is in power-down mode when PDN pin is pulled-down by PG11.
Table 4. Audio related jumpers
Jumper
Description
External slave mode (MCK from STM32F103ZGT6) is selected when
JP18 is set as shown (default setting).
JP18
2.6
PLL slave mode (reference clock BICK or LRCK) is selected when JP18 is
set as shown.
1 2 3
1 2 3
Serial Flash
A 64 or 128 Mbit serial Flash connected to SPI1 of STM32F103ZGT6 serial Flash chip
select is managed by IO-pin PB2. The SPI1_MISO is multiplexed with motor control, it can
be enabled by setting the jumper JP3. Refer to Section 2.9: Motor control for details.
2.7
CAN
The STM3210E-EVAL evaluation board supports CAN2.0A/B compliant CAN bus
communication based on 3.3 V CAN transceiver. High-speed mode, standby mode and
slope control mode are available and can be selected by setting JP8.
Table 5. CAN related jumpers
Jumper
Description
CAN transceiver works in standby mode when JP8 is set as shown.
JP8
1 2 3
1 2 3
DocID14220 Rev 6
11/50
49
2.8
UM0488
RS-232 connectors
Two D-type 9-pin connectors CN12 (USART1) and CN8 (USART2) are available on the
STM3210E-EVAL evaluation board.
2.9
Motor control
The STM3210E-EVAL evaluation board supports three-phase brushless motor control via a
34-pin connector CN1, which provides all required control and feedback signals to and from
the motor power driving board. Available signals on this connector include emergency stop,
motor speed, three-phase motor current, bus voltage, heatsink temperature from the motor
driving board and 6 channels of PWM control signals going to the motor driving circuit.
JP 20 selects one of the two synchronization methods for power factor correction (PFC).
The I/O pins used on the motor control connector CN1 are multiplexed with some
peripherals on the board; either the motor control connector or multiplexed peripherals can
be enabled by setting the jumpers JP3, JP4, JP11, JP15 and JP16 as described in Table 6.
Table 6. Motor control related jumpers
Jumper
JP20
JP20 allows to have a PFC synchronization signal redirected to the timer 3 input capture 1
pin, and additionally to the timer 3 external trigger input. JTAG debugging is disabled when
JP20 is fitted. Default setting: not fitted
JP2
JP2 should be kept on open when encoder signal is input from pin 31 of CN1 while it
should be kept on close when analog signal is from pin 31 of CN1 for special motor.
Default setting: not fitted
JP4
12/50
Multiplexed
peripherals
Description
1 2 3
1 2 3
USART2
JP3
SPI1
JP11
MC_PFCpwm is enabled when JP11 is open. The pin PB5 will be used as
interrupt input from temperature sensor when JP11 is closed.
Temperature
sensor
JP15
MC_UH or I2S_MCK are enabled when JP15 is open. The pin PC6 is used I2S and
as Smartcard_CMDVCC when JP15 is closed.
smartcard
JP16
DocID14220 Rev 6
Smartcard
UM0488
2.10
Smartcard
STMicroelectronics smartcard interface chip ST8024 is used on the STM3210E-EVAL board
for asynchronous 3 V and 5 V smartcards. It performs all supply protection and control
functions based on the connections with STM32F103ZGT6 listed in Table 7.
The Smartcard_CMDVCC and Smartcard_OFF are multiplexed with motor control.
They can be enabled by setting the jumpers JP15 and JP16. Refer to Section 2.9: Motor
control on page 12 for details.
Table 7. Connection between ST8024 and STM32F103ZGT6
ST8024 signals
Connect to
STM32F10X
Description
5V/3V
PB0
I/OUC
PB10
XTAL1
PB12
OFF
PC7
RSTIN
PB11
CMDVCC
PC6
2.11
Description
JP15
JP16
The OFF is connected to PC7 when JP16 is closed. It has to be kept on open
when PC7 is used by the motor control connector. Default setting: not fitted
MicroSD Card
The 128 Mbyte MicroSD Card connected to SDIO of STM32F103ZGT6 is available on the
board. MicroSD Card detection is managed by standard IO port PF11.
The MicroSD Card_D3 is multiplexed with IrDA. It can be enabled by setting the jumper
JP22, as explained in Section 2.14: IrDA on page 14.
The MicroSD Card_D0 and MicroSD Card CMD are multiplexed with the motor control
connector. They can be enabled by setting the jumpers JP17 and JP20.
DocID14220 Rev 6
13/50
49
UM0488
Table 9. MicroSD Card related jumpers
Jumper
2.12
Description
JP17
JP17 is used to enable MicroSD Card data line D0. MicroSD Card D0 is enabled
when JP17 is fitted. The JP17 should be kept on open when motor control
connector CN1 is used. Default setting: fitted
JP20
JP20 is used by the motor control connector, refer to Table 6 for details. JP20
should be kept on open for MicroSD Card operation. JTAG debugging is disabled
when JP20 is fitted.
Temperature sensor
One I2C interface temperature sensor STLM75 (55C to +125C) connected to I2C of
STM32F103ZGT6 is available on the board.
2.13
Analog input
Three BNC connectors CN2,CN3 and CN5 are connected to PC3, PC2 and PC1 of the
STM32F103ZGT6 as external analog input. The 50 ohm terminal resistor can be enabled by
closing the solder bridge JP23, JP24 and JP25 for each BNC connector. A low-pass filter
can be implemented for each BNC connector CN5, CN3 and CN2 by replacing R5 and C22,
R4 and C13, R3 and C9 with the right resistor and capacitor values, depending on the
requirements of your application.
2.14
IrDA
IrDA communication is supported by the IrDA transceiver U13 connected to USART3 of
STM32F103ZGT6. The IrDA transceiver can be enabled or disabled by JP21.
Table 10. IrDA related jumpers
Jumper
2.15
Description
JP21
JP22
USB
The STM3210E-EVAL evaluation board supports USB2.0 compliant full speed
communication via a USB type B connector (CN14). The evaluation board can be powered
by this USB connection at 5 V DC with a 500 mA current limitation. USB disconnection
simulation can be implemented by disconnecting the 1.5 K pull-up resistor from USB+ line.
The USB disconnection simulation feature is enabled by setting JP14.
14/50
DocID14220 Rev 6
UM0488
Description
The USB 1.5K pull-up resistor is always connected to USB+ line when
JP14 is set as shown.
123
JP14
2.16
123
2.17
CN9: standard 20-pin JTAG interface connector, compliant with ARM7/9 debug tools.
CN7: SAMTEC 20-pin connector FTSH-110-01-L-DV for both SWD and Trace,
compliant with ARM CoreSight debug tools.
Description
Pin connection
Description
Pin connection
CS
CS of Bank3 of
FSMC
Vss
GND
RS
FSMC_A0
Vcc
3.3V
WR/SCL
FSMC_NWE
VO
RD
FSMC_NOE
CLK
PA5
RESET
RESET#
SID
PA7
PD1
FSMC_D0
CS
PF10
PD2
FSMC_D1
+5V
PD3
FSMC_D2
GND
PD4
FSMC_D3
DocID14220 Rev 6
15/50
49
UM0488
Table 12. LCD modules (continued)
2.18
Description
Pin connection
10
PD5
FSMC_D4
11
PD6
FSMC_D5
12
PD7
FSMC_D6
13
PD8
FSMC_D7
14
PD10
FSMC_D8
15
PD11
FSMC_D9
16
PD12
FSMC_D10
17
PD13
FSMC_D11
18
PD14
FSMC_D12
19
PD15
FSMC_D13
20
PD16
FSMC_D14
21
PD17
FSMC_D15
22
BL_GND
GND
23
BL_control
3.3V
24
VDD
3.3V
25
VCI
3.3V
26
GND
GND
27
GND
GND
28
BL_VDD
3.3V
29
SDO
30
SDI
Description
Pin connection
SRAM
512Kx16 SRAM is connected to bank1 NOR/PSRAM3 of the FSMC interface and both 8-bit
and 16-bit access are allowed by BLN0 and BLN1 connected to BLE and BHE of SRAM
respectively.
2.19
NAND Flash
The 512 Mbit x8 or 1 Gbit x8 NAND Flash is connected to bank2 of the FSMC interface. The
ready/busy signal can be connected to either WAIT signal or FSMC_INT2 signal of the
STM32F103ZGT6 depending on the setting of JP7.
16/50
DocID14220 Rev 6
UM0488
JP7
2.20
Description
The ready/busy signal is connected to WAIT signal when JP7 is set as
shown (default setting)
1 2 3
1 2 3
NOR Flash
128 Mbit NOR Flash is connected to bank1 NOR/PSRAM2 of the FSMC interface. The 16bit operation mode is selected by a pull-up resistor connected to the BYTE pin of the NOR
Flash. Write protection can be enabled or disabled by jumper JP5.
Table 14. NOR Flash related jumpers
Jumper
JP5
Description
Write protection is enabled when JP5 is fitted.
Write protection is disabled when JP5 is not fitted (default setting).
Three different NOR 128-Mbit references can be present on the evaluation board depending
on component availability.
Table 15. NOR Flash reference
Reference
Manufacturer
M29W128GL70ZA6E
NUMONYX
M29W128GH70ZA6E
NUMONYX
S29GL128P90FFIR20
SPANSION
These three references are not identical in terms of ID code, speed, timing or block
protection. The demonstration firmware and the software library delivered with the board
support these three NOR Flash references. However, during the development of your
application software, you must verify which NOR reference is implemented on your board
(component referenced as U2 on silkscreen and schematic), and take its characteristics into
account.
DocID14220 Rev 6
17/50
49
Connectors
UM0488
Connectors
3.1
MS32821V1
CN1
pin #
CN1
pin #
Emergency stop
PA6
GND
PWM-UH
PC6
GND
PWM-UL
PA7
GND
PWM-VH
PC7
GND
PWM-VL
PB0
10
GND
PWM-WH
PC8
11
12
GND
PWM-WL
PB1
13
14
Phase A current
PC1
15
16
GND
Phase B current
PC2
17
18
GND
Phase C current
PC3
19
20
GND
PB12
21
22
GND
PA3 through
Dissipative brake PWM 0 ohm resister
unfitted
23
24
GND
+5V power
+5V
25
26
PFC SYNC
27
28
3.3V power
PFC PWM
PB5
29
30
GND
Encoder A
PA0
31
32
GND
Encoder B
PA1
33
34
Description
18/50
DocID14220 Rev 6
STM32F103Z
GT6 pin
PC0
PC5
PA2
Description
Bus voltage
Heatsink temperature
Encoder index
UM0488
3.2
Connectors
MS32822V1
3.3
Description
GND
GND
GND
Pin number
Description
GND
MS32823V1
3.4
Description
Pin number
NC
CANL
Description
CANH
3,5,6
GND
14 12 10
DocID14220 Rev 6
MS32860V1
19/50
49
Connectors
UM0488
Table 19. QST connector CN6
Pin number
3.5
Description
Pin number
Description
+5V
+5V
PB6
PA5
PB7
PA7
PB1
PA6
PF11
10
PB5
11
PA8
12
13
GND
14
GND
20 18 16 14 12 10
MS32816V1
20/50
Description
Pin number
Description
3.3V power
TMS/PA13
GND
TCK/PA14
GND
TDO/PB3
KEY
TDI/PA15
GND
10
RESET#
11
GND
12
TraceCLK/PE2
13
GND
14
TraceD0/PE3 or SWO/PB3
15
GND
16
TraceD1/PE4 or nTRST/PB4
17
GND
18
TraceD2/PE5
19
GND
20
TraceD3/PE6
DocID14220 Rev 6
UM0488
3.6
Connectors
MS32823V1
3.7
Description
Pin number
Description
NC
Connect to Pin 4
USART2_PA3
USART2_PA1
USART2_PA2
USART2_PA0
Connect to Pin 6
NC
GND
20 18 16 14 12 10
MS32816V1
Description
Pin number
Description
3.3V power
3.3V power
PB4
GND
PA15
GND
PA13
GND
PA14
10
GND
11
RTCK
12
GND
13
PB3
14
GND
15
RESET#
16
GND
17
DBGRQ
18
GND
19
DBGACK
20
GND
DocID14220 Rev 6
21/50
49
Connectors
3.8
UM0488
Pin #
Description
Alternative function
GND
PC7
MC/Smartcard
PC9
MicroSD Card
PA9
UASRT1_TX
PA0
MC/Wakeup/USART2_CTS
11
13
PA12
USB_DP
Remove R82.
15
PA14
Debug_TCK
17
PC10
IrDA_TX/MicroSDcard_D2
19
GND
21
PD0
FSMC_D2
23
PE2
Trace_CLK/FSMC_A23
25
PD2
MicroSDcard_CMD/MC
27
PD4
FSMC_OEN
29
PD6
FSMC_WAITN
31
PD7
FSMC_EBAR0
Remove R22.
33
PG10
FSMC_EBAR2
Remove R15.
35
PG12
FSMC_EBAR3
Remove R77.
37
PG14
Joystick_Left
Remove R102.
39
GND
22/50
DocID14220 Rev 6
UM0488
Connectors
Table 23. Daughterboard extension connector CN10 (continued)
Pin #
Description
Alternative function
41
PB4
Debug_TRST/MC
43
PB6
I2C_SCL/QST
45
PB8
CAN_RX
Remove R32.
47
PE0
FSMC_BLN0
49
D5V
51
PE4
Trace_D1/FSMC_A20
53
PE6
Trace_D3/FSMC_A22
55
PC14
OSC32_IN
57
PF0
FSMC_A0
59
GND
61
PF2
FSMC_A2
63
PF4
FSMC_A4
65
PF6
LD2
Remove R96.
67
PF8
LD4
Remove R98.
69
+3V3
PC6
Smartcard/MC/I2S_MCK
PC8
MicroSDcard_D0/MC
PA8
MCO/LCD_backlight/QST
PA10
USART1_RX
Remove R36.
10
GND
12
PA11
USB_DM
Remove R81.
14
PA13
Debug TMS
16
PA15
Debug TDI
18
PC11
IrDA_RX/MicroSDcard_D2
20
PC12
MicroSDcard_CLK
22
PD1
FSMC_D3
24
PE1
FSMC_BLN1
26
PD3
Joystick_Down
Remove R100.
DocID14220 Rev 6
23/50
49
Connectors
UM0488
Table 23. Daughterboard extension connector CN10 (continued)
Pin #
Description
Alternative function
28
PD5
FSMC_WEN
30
GND
32
PG9
FSMC_EBAR1
Remove R21.
34
PG11
36
PG13
Joystick_Right
Remove R103.
38
PG15
Joystick_Up
Remove R104.
40
PB3
Debug_TDO
42
PB5
MC/QST/Temperature sensor
44
PB7
I2C_SDA/QST
46
PB9
CAN_TX
48
3V3
50
GND
52
PE3
Trace_D0/FSMC_A19
54
PE5
Trace_D2/FSMC_A21
56
PC13
Anti-tamper button
Remove R111.
58
PC15
OSC32_OUT
60
PF1
FSMC_A1
62
PF3
FSMC_A3
64
PF5
FSMC_A5
66
PF7
LD3
Remove R97.
68
PF9
LD5
Remove R99.
70
GND
24/50
DocID14220 Rev 6
UM0488
Connectors
Table 24. Daughterboard extension connector CN11
Pin #
Description
Alternative function
GND
PG7
Joystick_Select
Remove R101.
PG5
FSMC_A15
PG3
FSMC_A13
PC13 Button
B3
11
RESET#
13
PD12
FSMC_A17
15
PD10
FSMC_D15
17
PD8
FSMC_D13
19
D5V
21
PB13
I2S_CLK
23
PB11
Smartcard_Reset
25
PE15
FSMC_D12
27
PE13
FSMC_D10
29
PE11
FSMC_D8
31
PD15
FSMC_D1
33
PE9
FSMC_D6
35
PE7
FSMC_D4
37
PG1
FSMC_A11
39
GND
41
PF14
FSMC_A8
43
PF12
FSMC_A6
45
PB2
BOOT1/SPI_NSS
47
PB1
MC/QST
49
51
PB0
Smartcard_3/5V/MC
53
PC4
Potentiometer
Remove R126.
55
PA6
MC/SPI_MISO/QST
57
PA4
Audio_RIN
Remove R67.
59
GND
DocID14220 Rev 6
25/50
49
Connectors
UM0488
Table 24. Daughterboard extension connector CN11 (continued)
Pin #
Description
Alternative function
61
PA1
MC/USART2_RTS
63
PC3
MC/BNC3
65
PC1
MC/BNC1
67
PF10
LCD_CS
69
+3V3
PG8
User button B4
Remove R106.
PG6
FSMC_INT2
PG4
FSMC_A14
PG2
FSMC_A12
10
GND
12
PD13
FSMC_A18
14
PD11
FSMC_A16
16
PD9
FSMC_A14
18
PB15
I2S_DIN
20
PB14
USB disconnect
22
PB12
Smartcard_CK/MC/I2S_CMD
24
PB10
Smartcard_IO
Remove R94.
26
PE14
FSMC_D11
28
PE12
FSMC_D9
30
GND
32
PD14
FSMC_D0
34
PE10
FSMC_D7
36
PE8
FSMC_D5
38
40
PG0
FSMC_A10
42
PF15
FSMC_A9
44
PF13
FSMC_A7
46
PF11
48
26/50
DocID14220 Rev 6
UM0488
Connectors
Table 24. Daughterboard extension connector CN11 (continued)
Pin #
Description
Alternative function
50
GND
52
PC5
MC
54
PA7
MC/SPI_MOSI/QST
56
PA5
SPI_CLK/DAC_LIN/QST
58
PA3
MC/USART2_RX
60
PA2
MC/USART2_TX
62
64
PC2
MC/BNC2
66
PC0
MC
68
70
GND
DocID14220 Rev 6
27/50
49
Connectors
3.9
UM0488
MS32823V1
3.10
Description
Pin number
Description
NC
Connect to Pin 4
USART1_PA10
Connect to Pin 8
USART1_PA9
Connect to Pin 7
Connect to Pin 6
NC
GND
28/50
Description
Pin number
Description
MicroSDcard_D2 (PC10)
MicroSDcard_CLK (PC12)
MicroSDcard_D3 (PC11)
Vss/GND
MicroSDcard_CMD (PD2)
MicroSDcard_D0 (PC8)
+3V3
MicroSDcard_D1 (PC9)
MicroSDcard_detect (PF11)
DocID14220 Rev 6
UM0488
3.11
Connectors
MS32861V1
3.12
Description
VBUS (power)
PA11
PA12
Pin number
Description
GND
5,6
Shield
3.13
3.14
GND
MS32862V1
DocID14220 Rev 6
29/50
49
Connectors
3.15
UM0488
12 3 4
17 18
56 78
MS32814V1
30/50
Description
Pin number
Description
VCC
GND
RST
NC
CLK
I/O
NC
NC
17
18
DocID14220 Rev 6
UM0488
Schematic diagrams
Schematic diagrams
This section provides the design schematics for the STM3210E-EVAL board key features, to
help you implement these features in your applications. Schematics are provided for:
DocID14220 Rev 6
31/50
49
32/50
DocID14220 Rev 6
Audio_PDN
Audio_RIN
Audio_LIN
Audio_SDA
Audio_SCK
MC O
I2S_CK
I2S_DIN
I2S_CMD
I2S_MCK
MicroSDCa rd_D0
MicroSDCa rd_D1
MicroSDCa rd_D2
MicroSDCa rd_D3
MicroSDCa rd_CMD
MicroSDCa rd_CLK
MicroSDCa rd_Detect
MicroSDC a rd_D0
MicroSDCa rd_D1
MicroSDCa rd_D2
MicroSDCa rd_D3
MicroSDCa rd_CM D
MicroSDCa rd_CLK
MicroSDCa rd_Detect
Audio_PDN
Audio_RIN
Audio_LIN
I2C_SD A
I2C_SCK
MCO
I2S_CK
I2S_DIN
I2S_CM D
I2S_MCK
FSMC_N
W AIT
FSMC_INT
2
FSMC_NBL
1
FSMC_NBL
0
FSMC_NO
E
FSMC_NW
E
FSMC_NE
2
FSMC_NCE
2
FSMC_NE
3
D[ 0..15]
A[ 0..23]
U_MCU
MCU.Sc
h Doc
SmartCard_OFF
SmartCard_CLK
SmartCard_RST
SmartCard_IO
SmartCard_3/5V
SmartCard_CMDVCC
IrDA_TX
IrDA_RX
USART
1 _TX
USART
1 _RX
USART
1 _TX
USART
1 _RX
IrDA_TX
IrDA_RX
USART
2 _RX
USART
2_CTS
USART
2_RTS
USART
2 _TX
USART
2 _RX
USART
2_CTS
USART
2_RTS
USART
2 _TX
SmartCa rd_OFF
SmartCa rd_CLK
SmartCa rd_RST
SmartCa rd_IO
SmartCa rd_3/5V
SmartCa rd_CMDVCC
U_SD&SmartCard
SD&Smart Card.SchDoc
U_Audio
Audio.SchDoc
FSMC_N
W AIT
FSMC_INT
2
FSMC_NBL
1
FSMC_NBL
0
FSMC_NO
E
FSMC_NW
E
FSMC_NE
2
FSMC_NCE
2
FSMC_NE
3
D[ 0..15]
A[ 0..23]
U_SRAM&Flas
h
SRAM&Fl
a sh.SchDoc
TRACE
_ D3
TRACE
_ D2
TRACE
_ D1
TRACE
_ D0
TRACE
_ CK
TDO/SWO
TCK/SW CLK
TMS/SW DIO
TRST
RESET
#
TDI
CAN_RX
CAN_TX
Potentiometer
TemperatureSensor_INT
SPI1_CS
SPI1_SCK
SPI1_MOSI
SPI1_MISO
LED4
LED3
LED2
LED1
USB_DM
USB_DP
USB_Disc
o nnect
LCD_b acklight
User_Button
WAKE UP
Anti_Tamper
JOY_ UP
JOY_ RI GHT
JOY_ LEFT
JOY_ DOWN
JOY_ SE L
LCD_CS
FSMC_NE 4
MC_PFCsync1
MC_PFCsync2
MC_WL
MC_VH
MC_VL
MC_UH
MC_UL
MC_WH
MC_NTC
MC_DissipativeBrake
MC_PFC
p wm
MC_EnIndex
MC_BusV
o ltage
MC_HeatsinkTemperature
MC_EnB
MC_EnA
MC_CurrentC
MC_CurrentB
MC_CurrentA
MC_EmergencySTOP
U_Power
Power.SchDoc
TRACE
_ D3
TRACE
_ D2
TRACE
_ D1
TRACE
_ D0
TRACE
_ CK
TDO/SWO
TCK/SW CLK
TMS/SW DIO
TRST
RESET
#
TDI
U_JT AG&SWD
JTAG&SWD.Sc hDoc
CAN_RX
CAN_TX
Potentiometer
Flash_CS
BNC3
Flash_SCK
BNC2
Flash_MOSI
BNC1
Flash_MIS O
LED4
LED3
LED2
LED1
USB_DM
USB_DP
USB_Disconnec t
TemperatureSensor_SCL
TemperatureSensor_SDA
TemperatureSensor_INT
U_Peripherals
Peripherals.SchDoc
D[ 0..15]
A[ 0..23]
FSMC_NE 4
FSMC_NW E
FSMC_NO E
RESET#
LCD_b acklight
User_Button
WAKE UP
Anti_Tamper
JOY_ UP
JOY_ RI GHT
JOY_ LEFT
JOY_ DOWN
JOY_ SE L
LCD_C S
LCD_CLK
LCD_DI
LCD_D O
U_LCD&Joystick
LCD&Joystick.SchDoc
MC_PFCsy nc1
MC_PFCsy nc2
MC_W L
MC_V H
MC_V L
MC_U H
MC_UL
MC_W H
MC_NTC
MC_DissipativeBrake
MC_PFCpwm
MC_EnIndex
MC_BusV
o ltage
MC_HeatsinkTemperature
MC_En B
MC_En A
MC_CurrentC
MC_CurrentB
BNC3
MC_CurrentA
BNC2
MC_EmergencySTOP BNC1
U_MotorCtrl
MotorCtrl.SchDoc
Rev: D.2(PCB.SCH
) Date:6/4/2013
STM3210E- EVAL
Number:MB6 72
Title:
STMicroelectronics
Shee t 1
of
11
Schematic diagrams
UM0488
10K
MC_PFCsync1
TRST
SPI1_CS
R43
X2
Default setting:close
C44
10pF
R39
0
RESET
#
B1
RESE
T
C94
100nF
R119
10K
+3V3
+3V3
20pF
C48
20pF
C47
MicroSDCa rd_D1
10K
R45
X1
390
R40
MicroSDCa rd_CLK
Anti_Tamper
1 BOOT0
Default setting:close
Default setting:Open
JP22
JP17
JP16
I2S_CK
USB_Disc
o nnect
I2S_DIN
I2C_SC
K
I2C_SDA
CAN_RX
CAN_TX
SmartCard_IO
SmartCard_RST
TDO/SWO
MC_WL
USART
1 _TX
USART
1 _RX
USB_DM
USB_DP
TMS/SW DIO
TCK/SW CLK
TDI
Audio_RIN
MC_BusV
o ltage
MC_CurrentA
MC_CurrentB
MC_CurrentC
Potentiometer
MC_HeatsinkTemperature
R2 do not fit
Default setting:close
JP11
TP11
MCO
Default setting:2<->3
JP3
JP4
Default setting:Open
R31
C43 2
10pF
R135
0
I2S_MCK
MC_UH
SmartCard_OFF
MC_VH
MC_WH
MicroSDCa rd_D0
IrDA_TX
MicroSDCa rd_D2
IrDA_RX
MicroSDCa rd_D3
Default setting:close
JP15
SmartCard_CLK
MC_NTC
I2S_CMD
TemperatureSensor_INT
MC_PFC
p wm
SmartCard_CMDVCC
BOOT1
+3V3
1
MC_VL
SmartCard_3/5V
LCD_b acklight
MCO
MC_UL
SPI1_MOSI
MC_EmergencySTOP
SPI1_MISO
SPI1_SCK
Audio_LIN
MC_DissipativeBrake
USART
2 _RX
USART
2 _TX
MC_EnIndex
USART
2_RTS
MC_EnB
WAKE UP
MC_EnA
USART
2_CTS
DocID14220 Rev 6
RESET
#
26
27
28
29
44
45
96
97
98
99
111
112
113
7
8
9
PC0
PC1
PC2
PC3
PC4
PC5
PC6
PC7
PC8
PC9
PC10
PC11
PC12
PC13
PC14
PC15
25
24
23
106
138
46
47
48
133
134
135
136
137
139
140
69
70
73
74
75
76
34
35
36
37
40
41
42
43
100
101
102
103
104
105
109
110
PB0
PB1
PB2
PB3
PB4
PB5
PB6
PB7
PB8
PB9
PB10
PB11
PB12
PB13
PB14
PB15
PA0
PA1
PA2
PA3
PA4
PA5
PA6
PA7
PA8
PA9
PA10
PA11
PA12
PA13
PA14
PA15
STM32F103ZET6
IC149-144-045-B5
NRST
OSC_OUT
OSC_IN
NC
BOOT 0
PC0
PC1
PC2
PC3
PC4
PC5
PC6
PC7
PC8
PC9
PC10
PC11
PC12
PC13-ANT I_TAMP
PC14-OSC3 2_IN
PC15-OSC3 2_OUT
PB0
PB1
PB2
PB3
PB4
PB5
PB6
PB7
PB8
PB9
PB10
PB11
PB12
PB13
PB14
PB15
PA0-WKU
P
PA1
PA2
PA3
PA4
PA5
PA6
PA7
PA8
PA9
PA10
PA11
PA12
PA13
PA14
PA15
U8A
PD15
PD14
PD13
PD12
PD11
PD10
PD9
PD8
PD7
PD6
PD5
PD4
PD3
PD2
PD1
PD0
PE15
PE14
PE13
PE12
PE11
PE10
PE9
PE8
PE7
PE6
PE5
PE4
PE3
PE2
PE1
PE0
PF15
PF14
PF13
PF12
PF11
PF10
PF9
PF8
PF7
PF6
PF5
PF4
PF3
PF2
PF1
PF0
PG15
PG14
PG13
PG12
PG11
PG10
PG9
PG8
PG7
PG6
PG5
PG4
PG3
PG2
PG1
PG0
86
85
82
81
80
79
78
77
123
122
119
118
117
116
115
114
68
67
66
65
64
63
60
59
58
5
4
3
2
1
142
141
55
54
53
50
49
22
21
20
19
18
15
14
13
12
11
10
132
129
128
127
126
125
124
93
92
91
90
89
88
87
57
56
PD15
PD14
PD13
PD12
PD11
PD10
PD9
PD8
PD7
PD6
PD5
PD4
PD3
PD2
PD1
PD0
PE15
PE14
PE13
PE12
PE11
PE10
PE9
PE8
PE7
PE6
PE5
PE4
PE3
PE2
PE1
PE0
PF15
PF14
PF13
PF12
PF11
PF10
PF9
PF8
PF7
PF6
PF5
PF4
PF3
PF2
PF1
PF0
PG15
PG14
PG13
PG12
PG11
PG10
PG9
PG8
PG7
PG6
PG5
PG4
PG3
PG2
PG1
PG0
D3
D2
D15
D14
D13
D1
D0
D12
D11
D10
D9
D8
D7
D6
D5
D4
A18
A17
A16
A22
A21
A20
A19
A23
A5
A4
A3
A2
A1
A0
A9
A8
A7
A6
A15
A14
A13
A12
A11
A10
A[ 0..23]
D[ 0..15]
FSMC_NCE2
FSMC_N
W AIT
FSMC_NWE
FSMC_NO E
JOY_ DOWN
MicroSDCa rd_CMD
MC_PFCsync2
FSMC_NBL
1
FSMC_NBL
0
TRACE
_ D3
TRACE
_ D2
TRACE
_ D1
TRACE
_ D0
TRACE
_ CK
MicroSDCa rd_Detect
LCD_CS
LED4
LED3
LED2
LED1
JOY_ UP
JOY_ LEFT
JOY_ RI GHT
FSMC_NE
4
Audio_PDN
FSMC_NE
3
FSMC_NE
2
User_Button
JOY_ SEL
FSMC_INT
2
A[ 0..23]
D[ 0..15]
MCU
6
+3V3
PC14
D5V
+3V3
D5V
PC13
RESET
#
JP9
R11
R14
PF2
PF4
PF6
PF8
PF0
PE4
PE6
PB4
PB6
PB8
PE0
PD0
PE2
PD2
PD4
PD6
PD7
PG10
PG12
PG14
PA12
PA14
PC10
PC7
PC9
PA9
PA0
PA1
PC3
PC1
PF10
PB0
PC4
PA6
PA4
PF14
PF12
PB2
PB1
PB13
PB11
PE15
PE13
PE11
PD15
PE9
PE7
PG1
PD12
PD10
PD8
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
Header 35X2
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
65
67
69
CN10(Left)
Header 35X2
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
65
67
69
CN11(Right)
PF1
PF3
PF5
PF7
PF9
PE3
PE5
PC13
PG9
PG11
PG13
PG15
PB3
PB5
PB7
PB9
PA11
PA13
PA15
PC11
PC12
PD1
PE1
PD3
PD5
PC6
PC8
PA8
PA10
PC2
PC0
PC5
PA7
PA5
PA3
PA2
PG0
PF15
PF13
PF11
PD14
PE10
PE8
PD13
PD11
PD9
PB15
PB14
PB12
PB10
PE14
PE12
PG8
PG6
PG4
PG2
JP10
+3V3
Header 7X2
1
2
3
4
5
6
7
8
9 10
11 12
13 14
CN6
TP1
Ground
PC15
TP2
Ground
Shee t 2
of
11
QST connector
Rev: D.2(PCB.SCH
) Date:6/4/2013
STM3210E-EVAL MCU
Number:MB6 72
Title:
+5V
PA5
PA7
PA6
PB5
STMicroelectronics
PB6
PB7
PB1
PF11
PA8
+5V
Extension connector
820
820
PG7
PG5
PG3
UM0488
Schematic diagrams
33/50
49
DocID14220 Rev 6
TemperatureSensor_SDA
TemperatureSensor_SCL
TemperatureSensor_INT
CAN_ RX
CAN_ TX
PB7
PB6
PB5
PB8
PB9
R95
C78 1M
4.7nF
R38
R46
R44
3 T2
0
0
0
100nF
C27
1
2
3
4
10K
R26
R51
4K7
1.5K
R69
6
5
4
RS
CANH
CANL
Vref
9013
T1
D
GND
VCC
R
U4
36K
R65
+3V3
SN65HVD2 30
10K 9013
R70
+3V3
R32
U5V
+3V3
I/O1
Vb us
I/O2
USBLC 6-2P6
I/O1
GND
I/O2
U11
1
2
3
8
7
6
5
JP8
0
Default setting: 1<->2
R27
R82
R81
+3V3
R66
47K
+3V3
U5V
C74
100nF
2
PB14
1
2
3
4
R9
0
8
7
6
5
C49
100nF
+3V3
CAN
Temperature sensor
STL M75M2E
SDA VDD
SCL
A0
OS/INT A1
GND
A2
U9
+3V3
R10
do not fit
R28
120
JP6
1
6
2
7
3
8
4
9
5
USB
CN4
DB9 -male CAN connector
USB_ Disconnect
USB_ DP
USB_ DM
JP14
PA12
PA11
CN2
VB334
Flash_SCK
Flash_MOSI
Flash_CS
Flash_MI SO
BNC1
BNC2
BNC3
PC1
PC2
PC3
LED4
LED3
LED2
LED1
PA5
PA7
PB2
PA6
JP25
JP24
JP23
R138
R137
R136
50
50
50
CN5
VB334
R35 0
R37 0
+3V3
PC4
Date:6/4/2013
C100
10nF
RV1
10K
+3V3
6
5
4
3
11
SPI Flash
Sheet 3 of
+3V3
Potentiometer
R126
LED
Potentiometer
M25P64-VME6G
Title:
100nF U6
7
HOLD
C
8
VCC
D
1
S
VSS
2
Q
W
C14
BNC connector
CN3
VB334
LD1
Green
1
LD2
Orange
R97
1
600
LD3
Red
R98
1
600
LD4
Blue
R99
1
600
600
R96
PF9
PF8
PF7
PF6
STMicroelectronics
5
4
3
2
1
U5V
5
4
3
2
1
CN14
USB-typeB connector
1
VCC
2
D3
D+
4
GND
0
SHEL
L
0
SHEL
L
5
4
3
2
1
34/50
1
Schematic diagrams
UM0488
DocID14220 Rev 6
USART1_RX
USART1_TX
USART2_CTS
USART2_RTS
USART2_RX
USART2_TX
PA10
PA9
PA0
PA1
PA3
PA2
C42
100nF
10K 10
R34
12
11
10
12
11
R36
C41
100nF
C39
100nF
C31
100nF
R30
R2 9
C29
100nF
C28
100nF
GND
R2in
T2out
R1in
T1out
C2+
GND
R2in
T2out
R1in
T1out
C2+
C2-
VCC
ST3 232ECTR
V-
R2out
T2in
R1out
T1in
C1-
C1+
V+
U7
C2-
VCC
ST3 232ECTR
V-
R2out
T2in
R1out
T1in
C1-
C1+
V+
U5
16
15
13
14
16
15
13
14
C37
100nF
RS232_RX1
RS232_TX1
C40
100nF
+3V3
C52
100nF
RS232_CTS2
RS232_RTS2
RS232_RX2
RS232_TX2
C30
100nF
+3V3
1
6
2
7
3
8
4
9
5
CN8
DB9 -male USART2
1
6
2
7
3
8
4
9
5
do not fit
R62
CN12
DB9 -male USART1
do not fit
R33
C68
0.1u F
47
R85
PC10
PC11
C77
4.7uF
R89
C72
0.1uF
R92
R88
10K
1
2
6
7
8
3
4
IrDA
TFDU4300
Date:6/4/2013
Sheet 4 of
11
Anode (VCC2)
Cathode
VCC1
Vlogic
GND
TxD
RxD
SD
U13
Title:
STMicroelectronics
C71
4.7uF
+3V3
IrDA_ TX
IrDA_ RX
JP21
+3V3
UM0488
Schematic diagrams
35/50
49
36/50
DocID14220 Rev 6
MCO
I2S_DIN
I2S_CMD
I2S_CK
Audio_PDN
+3V3
PG11
PB6
PB7
PB15
PB12
PB13
+3V3
10
R83
R128
R57
do not fit
PA8
R56
PC6
Audio_SCK
Audio_SDA
I2S_MCK
JP18
C79
10uF
C73
10uF
R72
10K
C59
1uF
+3V3
C16
100nF
C66
100nF
TP7
MCKO
22
21
16
15
6
8
9
10
7
25
18
17
11
13
14
VCOM
AVSS
AVDD
TEST2
TEST1
RIN1/IN1+
LI N1/IN1LIN2 /IN2+
RIN2/IN2MIN/LI N3
VCOC/RI N3
LOUT/RC P
ROUT/RCN
SPP
SPN
HPL
HPR
12
1
32
31
30
29
28
5
27
26
20
19
24
23
AK4343
HVSS
HVDD
DVSS
DVDD
I2C
CSN/CAD0
CCLK /SCL
CDTI/SDA
PDN
MUTET
MCKO
MCKI
SDTI
LRCK
BICK
U10
TP12
SPP
C53
2.2uF
C65
10uF
LIN
TP8
HPR
C54
100nF
C34
100nF
TP9
RIN
U14
KSS-15
08
TP10
HPL
TP6
+3V3
1uF
1uF
C57
C56
1
2
TP13
SPN
C58
do not fit
R73
10
C67
0.22uF
R67
R68
0
0
47uF
47uF
C80
PA4
PA5
3
1
Audio_RIN
Audio_LIN
ST-22 5-02
2 CN15
Date:6/4/2013
Title:
STMicroelectronics
C55
do not fit
R86
10
C76
0.22uF
6.8
R87
6.8
R84
C70
Sheet 5 of
11
Schematic diagrams
UM0488
User_Butto n
PG8
R106
R101
R100
R102
R103
R104
PC13
R111
0
B3
Tamper
R121
4K7
+3V3
100
R125
User Button
3
1
4
6
C92
100nF
MT00 8-A
DWON
LEFT
RIGHT
UP
Selection
COMMON
U19
Ta mper Button
100
Anti_Tamper
100nF
100nF
C96
R124
0
0
0
0
0
100nF
C95
100
C93
100nF
PG7
PD3
PG14
PG13
PG15
+3V3
100nF
C98
C97
R117
B4
USER
R122
4K7
+3V3
JOY_ SEL
JOY_ DOWN
JOY_L EFT
JOY_ RIGHT
JOY_ UP
100nF
C99
2
1
WAKEUP
PA0 R110
330
+3V3
B2
WKUP
Wake up Butt on
R123
220K
C91
do not fit
100
R120
Joys tick
R113
10K
R112
10K
R114
10K
R115
10K
R116
10K
3
4
4
3
DocID14220 Rev 6
2
LCD_CLK
LCD_DI
LCD_CS
LCD_DO
FSMC_ NOE
RESET
#
R80 0
R77 0
PA5
PA7
PF10
PA6
+3V3
+3V3
+3V3
+3V3
A0
R74
R76
do not fit do not fit
JP27
JP26
+3V3
R105
do not fit
R107 0
PA8
A[0 ..23]
LCD_b acklight
PG12
PD5
D[0..15]
+5V
R79
0
100nF
1
2
3
4
5
6
7
8
Date:6/4/2013
14
15
16
17
18
19
20
21
6
7
8
9
10
11
12
13
D8
D9
D10
D11
D12
D13
D14
D15
D0
D1
D2
D3
D4
D5
D6
D7
Sheet 6
of
Gray LCD
11
Vss
Vcc
VO
CLK
SID
CS
A
K
U18
TFT LCD
STM3210E-EVAL LCD&Joystick
Number:MB672
Title:
PD10
PD11
PD12
PD13
PD14
PD15
PD16
PD17
PD1
PD2
PD3
PD4
PD5
PD6
PD7
PD8
BL_ GND
BL_ Control
VDD
VCI
GND
GND
BL_ VDD
SDO
SDI
CS
RS
WR/SCL
RD
RESE
T
CN16
C64
22
23
24
25
26
27
28
29
30
1
2
3
4
5
STMicroelectronics
FSMC_ NE4
FSMC_ NWE
A[0 ..23]
D[0..15]
UM0488
Schematic diagrams
37/50
49
C83
100nF
+5V
C86
330nF
DocID14220 Rev 6
C82
47uF
C89
C87
R90
4K7
+3V3
1
2
3
4
100nF 5
6
7
100nF 8
9
10
11
12
13
14
5
6
7
8
CN18
C816
GND
NC
I/O
NC
VCC
RST
CLK
NC
100nF
ST8 024CDR
C90
CL KDI V1 AUX2UC
CL KDI V2 AUX1UC
5V/3V
I/OUC
PGND
XTAL2
C1+
XTAL1
Vd dp
OFF
C1GND
Vup
Vdd
PRES
RSTIN
PRES
CMDVCC
I/O
PORADJ
AUX2
Vcc
AUX1
RST
CGND
CLK
U17
18
17
1
2
3
4
28
27
26
25
24
23
22
21
20
19
18
17
16
15
100K
R118
+3V3
R71
R94
R91 R93
10K 10K
+3V3
R108
10K
R109
10K
+3V3
TP14
AUX2
TP15
AUX1
PB11
PC6
C12
100nF
PB12
PC7
PB10
PB0
Smartcard
SmartCard_RST
SmartCard_CMDVCC
+3V3
C84
47uF
SmartCard_CLK
SmartCard_OFF
SmartCard_IO
SmartCard_3/5V
MicroSDCard_D1
MicroSDCard_D0
MicroSDCard_D3
MicroSDCard_D2
MicroSDCard_CLK
MicroSDCard_CMD
R131
47K
R133
47K
MicroSDCard_Detect
PF11
CN13
PJS008-2 000
SMS064FF or SMS128FF
R130
47K
R134
47K
+3V3
R129
Date:6/4/2013
Sheet 7
of
11
MicroSD card
Title:
STMicroelectronics
PC9
PC8
PC11
PC10
PC12
PD2
R132
47K
+3V3
1
2
3
4
5
6
7
8
SW2
SW1
38/50
9
10
Schematic diagrams
UM0488
DocID14220 Rev 6
PA6
MC_PF Csync1
MC_PF Csync2
MC_CurrentC
MC_CurrentB
MC_CurrentA
MC_EmergencySTOP
PC3
PC2
PC1
PB4
PD2
R8
JP20
C51
do not fit
R3 0
C9
do not fit
R4 0
C13
do not fit
R5 0
C22
do not fit
C8
1nF
R7
3.3K
+3V3
C60
do not fit
BNC3
BNC2
BNC1
MC_PF Cpwm
MC_EnA
MC_EnB
MC_NTC
MC_Dissip ativeBrake
MC_UH
MC_UL
MC_VH
MC_VL
MC_WH
MC_WL
PB5
PA0
PA1
+5V
PB12
PA3
PC6
PA7
PC7
PB0
PC8
PB1
MC_connector
C5
do not fit
C2
10nF
JP2
C1
do not fit
C4
do not fit
EMERGENCY
STOP
MC-UH
MC_UL
MC_VH
MC_VL
MC_WH
MC_WL
CURR ENT A
CURR ENT B
CURR ENT C
NTC BYPASSR EL AY
DI SSI PATIVE BRAKE
+5V POWER
PFC SYNC
PFC PWM
Encoder A
Encoder B
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
CN1
GND
GND
GND
GND
GND
GND
BUS VOL TAGE
GND
GND
GND
GND
GND
Heatsink Temperature
3.3V Power
GND
GND
Encoder Index
+3V3
R1
R6
PC0
C3
do not fit
PA2
C6
100nF
PC5
MC_EnIndex
Date:6/4/2013
Sheet 8
Title:
MC_BusVoltage
MC_HeatsinkTemperature
C7
R63
100nF 100K
STMicroelectronics
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
of
11
UM0488
Schematic diagrams
39/50
49
40/50
DocID14220 Rev 6
D3
D2
D1
D0
CK
0
do not fit
0
do not fit
PE6
PE5
PE4
PE3
PE2
R49
R50
R60
R61
KEY
Trace connector
TRACE
_
TRACE
_
TRACE
_
TRACE
_
TRACE
_
CN7
FTSH-110 -01-L-DV
+3V3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
TMS/SWDIO
TCK/S
W CLK
TDO/SWO
TDI
TRST
RESET
#
PA13
PA14
PB3
PA15
PB4
R54
10K
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
+3V3
R64
10K
R47
R48
JTAG c onnector
CN9
JTAG
+3V3
10K
10K
R55
do not fit
R52
10K
+3V3
JP19
Date:6/4/2013
Sheet 9
Title:
STMicroelectronics
of
11
Schematic diagrams
UM0488
DocID14220 Rev 6
U5V
DC-10B
CN17
D5V
1
2
3
E5V
5
3
1
6
4
2
JP13
+5V
TP4
5V
Z1
SMAJ5 .0A-TR
300
R127
C85
100nF
LD5
red
1
1
CV
BNX0 02-01
SG CG1
CG2
CG3
SV
U16
3
TP16
Ground
4
5
6
R41
0
VREF
31
30
71
107
143
38
16
51
61
83
94
120
130
32
33
MCU power
VDD
131
121
95
84
62
52
17
39
144
108
72
Vb at
VBAT
VREF+
VDDA
STM32F10 3ZET6
VREF
VSSA
VSS_1 VDD_11
VSS_2 VDD_10
VSS_3
VDD_9
VSS_4
VDD_8
VSS_5
VDD_7
VSS_6
VDD_6
VSS_7
VDD_5
VSS_8
VDD_4
VSS_9
VDD_3
VSS_10 VDD_2
VSS_11 VDD_1
U8B
JP1
C50
10uF
VREF
TP3
+3V3
CR1220 ho lder
BT1
C46
10nF
L1
BEAD
JP12
+3V3
VDDA
R42
47
VDDA
C45
10nF
VREF
+
Jumper for choice between power connector, USB connector or daughter board
U15
ZEN056V13 0A24LS
C81
10uF
E5V
VDD
C61
220uF
Vin
2
C69
47uF
Date:6/4/2013
STM3210E-EVAL Power
Number:MB672
Title:
+3V3
C11
100nF
TP5
3V3
STMicroelectronics
C36
C17
C35
C33
C25
100nF 100nF 100nF 100nF 100nF
VDD
Vo ut
Power regulator
U12
LD1 086D2M33
C32
C23
C38
C26
C19
C18
100nF 100nF 100nF 100nF 100nF 100nF
+5V
GND
1
Sheet10 of
11
UM0488
Schematic diagrams
41/50
49
42/50
DocID14220 Rev 6
FSMC_I NT2
FSMC_ NE2
FSMC_ NWE
FSMC_ NOE
FSMC_ NWAIT
FSMC_ NBL0
FSMC_ NBL1
FSMC_ NE3
VSS
VSS
VCC
VCC
D1
E6
D6
E1
G1
F1
F2
E2
D2
C2
C1
B1
G6
F6
F5
E5
D5
C6
C5
B6
+3V3
IS61WV5 1216BLL-10MLI
CE
WE
OE
BLE
BHE
I/O15
I/O14
I/O13
I/O12
I/O11
I/O10
I/O9
I/O8
I/O7
I/O6
I/O5
I/O4
I/O3
I/O2
I/O1
I/O0
R13
10K
+3V3
100nF
100nF
C20
C63
C10
100nF
R19
10K
+3V3
D15
D14
D13
D12
D11
D10
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
A22
A21
A20
A19
A18
A17
A16
A15
A14
A13
A12
A11
A10
A9
A8
A7
A6
A5
A4
A3
A2
A1
A0
A5
B5
A4
G2
F2
F7
B4
B8
C5
D4
D5
C4
B3
E7
D7
C7
A7
B7
D6
C6
A6
B6
A3
C3
D3
B2
A2
C2
D2
E2
VCC
VCC
VCC
VSS
VSS
VSS
DQ15A-1
DQ14
DQ13
DQ12
DQ11
DQ10
DQ9
DQ8
DQ7
DQ6
DQ5
DQ4
DQ3
DQ2
DQ1
DQ0
10K
R12
+3V3
JP5
M29W1 28GH70ZA6E
M29W1 28GL7 0ZA6E
S29GL128 P90FFIR 20
W
RP
RB
G
E
BYTE
Vp p/WP
A22
A21
A20
A19
A18
A17
A16
A15
A14
A13
A12
A11
A10
A9
A8
A7
A6
A5
A4
A3
A2
A1
A0
U2
G5
F1
D8
H2
H7
E8
G7
F6
G6
F5
G4
F4
G3
F3
E6
H6
E5
H5
H4
E4
H3
E3
+3V3
C75
100nF
FSMC_ NCE2
D15
D14
D13
D12
D11
D10
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
R22
10K
R23
C62
100nF
PD7
+3V3
C15
100nF
16
17
18
8
9
A16
A17
WP
RB
VSS
VSS
VDD
VDD
19
7
13
36
12
37
+3V3
Date:6/4/2013
Sheet 11 of
Title:
do not fit
R25
R24
10K
+3V3
C21
100nF
100nF
100nF
C24
C88
11
NAND51 2W3A2CN6E
NAND51 2W3A2BN6E
CL
AL
W
R
E
I/O0
I/O1
I/O2
I/O3
I/O4
I/O5
I/O6
I/O7
U3
STMicroelectronics
JP7
29
30
31
32
41
42
43
44
D0
D1
D2
D3
D4
D5
D6
D7
R17 R18
10K 10K
+3V3
B5
G5
A2
A1
B2
A18
A17
A16
A15
A14
A13
A12
A11
A10
A9
A8
A7
A6
A5
A4
A3
A2
A1
A0
U1
R20
10K
+3V3
R16
10K
H1
D3
E4
F4
F3
G4
G3
H5
H4
H3
H2
D4
C4
C3
B4
B3
A5
A4
A3
PG6
R15
+3V3
A18
A17
A16
A15
A14
A13
A12
A11
A10
A9
A8
A7
A6
A5
A4
A3
A2
A1
A0
D[0..15]
A[0 ..23]
PG9 R21 0
PD5
PD4
PD6
PE0
PE1
PG10
D[0..15]
A[0 ..23]
Schematic diagrams
UM0488
C3
4.7uF/10V
C6
100nF
BL GND
C4
100nF
VL
L2
BEAD
BL VDD
TP5
TP4
VDD
BL VDD
RP1
10K
L1
R6
4K7
8
1
7
3
9
STPS1L40M
STL D40DPMR
STL D40DPUR
SW
Vo
Vi
NC
EN
GND
FB
PGND Rset
U1
Z1
BL GND
[N/A]
[N/A]
R15
[N/A]
R14
[N/A]
R13
[N/A]
R12
R7
4K7
R8
4K7
BL GND
4.7uH(1A)
R5
4K7
R4
[N/A]
BL _Control R1
0
C5
10nF
C2
4.7uF/10V
VL
VH
VDD
PD9
TP3
SDO
BLGND
SDI
TP2
PD0
R11
R9
4K7
4
2
6
5
RS
GND
R3
10
R10
4K7
C7
10nF
VH
VDD
A
K
#RESE
T
SDO
SDI
CS
WR_SC
L
RD
RS
Enable
DotClk
HSYNC
VSYNC
RP2
10K
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
PD17
PD16
PD15
PD14
PD13
PD12
PD11
PD10
PD9
PD8
PD7
PD6
PD5
PD4
PD3
PD2
PD1
PD0
49
48
47
44
43
42
41
37
36
35
34
33
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
PD17
PD16
PD15
PD14
PD13
PD12
PD11
PD10
PD9
PD8
PD7
PD6
PD5
PD4
PD3
PD2
PD1
PD0
FH26-51S-0.3SHW(05)
AM- 240320LDTNQW-00H (SPI)
AM- 240320LDTNQW-02H (16bit parallel)
A
K
GND
GND
GND
GND
VDD
VCI
VCI
RESE
T
SDO
SDI
CS
WR/SC
L
RD
RS
Enable
DotClk
HSYNC
VSYNC
NC
NC
NC
CN3
RP3
10K
RP4
10K
RP5
10K
52
53
40
45
50
51
30
31
32
11
46
7
5
6
10
8
1
2
3
4
9
38
39
BL GND
R2
100K
BL GND
C1
4.7uF/35V
PD16
PD14
PD12
PD10
TP1
PD8
PD6
PD4
PD2
RD
PD17
PD15
PD13
PD11
PD7
PD5
PD3
PD1
DocID14220 Rev 6
Enable
HSYNC
DotClk
VSYNC
BL VDD
VDD
SDO
SDI
9
10
11
12
13
14
15
16
BL GND
BL _Control
SDO
#RESE
T
1
2
3
4
5
6
7
8
PD10
PD11
PD12
PD13
PD14
PD15
PD16
PD17
PD1
PD2
PD3
PD4
PD5
PD6
PD7
PD8
Rev: C.1(PCB.SCH)
Date:1/21/2011
Sheet1
of 1
Title:
14
15
16
17
18
19
20
21
6
7
8
9
10
11
12
13
SPI connector
VDD
VCI
GND
GND
BL _VDD
BL _Control
BL _GND
BL _GND
CS
SCL
SDI
RS
WR
RD
SDO
RESE
T
CN1
PD10
PD11
PD12
PD13
PD14
PD15
PD16
PD17
PD1
PD2
PD3
PD4
PD5
PD6
PD7
PD8
16-bit connector
BL _GND
BL _Control
VDD
VCI
GND
GND
BL _VDD
SDO
SDI
CS
RS
WR/SC
L
RD
RESE
T
CN2
CS
WR_SC
L
SDI
22
23
24
25
26
27
28
29
30
1
2
3
4
5
STMicroelectronics
BL VDD
VDD
BL _Control
BL GND
CS
RS
WR_SC
L
RD
#RESE
T
UM0488
Schematic diagrams
43/50
49
Appendix A
UM0488
Pin #
44/50
Pin name
PE2
Trace_CLK/FSMCA23
PE3
Trace_D0/FSMCA19
PE4
Trace_D1/FSMCA20
PE5
Trace_D2/FSMCA21
PE6
Trace_D3/FSMCA22
VBAT
+3V3 or battery
PC13-ANTI_TAMP
Anti-tamper button
PC14-OSC32_IN
32K OSC
10
PF0
FSMCA0
11
PF1
FSMCA1
12
PF2
FSMCA2
13
PF3
FSMCA3
14
PF4
FSMCA4
15
PF5
FSMCA5
16
VSS_5
GND
17
VDD_5
+3V3
18
PF6
LD2
19
PF7
LD3
20
PF8
LD4
21
PF9
LD5
22
PF10
23
OSC_IN
8MHz crystal X1
24
OSC_OUT
8MHz crystal X1
25
NRST
Reset button B1
26
PC0
27
PC1
28
PC2
29
PC3
30
VSSA
GND
31
VREF-
GND
32
VREF+
+3V3
DocID14220 Rev 6
UM0488
Pin name
33
VDDA
+3V3
34
PA0-WKUP
35
PA1
36
PA2
37
PA3
38
VSS_4
GND
39
VDD_4
+3V3
40
PA4
DAC1_Audio RIN
41
PA5
42
PA6
43
PA7
44
PC4
Potentiometer
45
PC5
46
PB0
47
PB1
48
PB2
Boot1/ NSS_SPI_Flash
49
PF11
50
PF12
FSMCA6
51
VSS_6
GND
52
VDD_6
+3V3
53
PF13
FSMCA7
54
PF14
FSMCA8
55
PF15
FSMCA9
56
PG0
FSMCA10
57
PG1
FSMCA11
58
PE7
FSMCD4
59
PE8
FSMCD5
60
PE9
FSMCD6
61
VSS_7
GND
62
VDD_7
+3V3
63
PE10
FSMCD7
64
PE11
FSMCD8
65
PE12
FSMCD9
66
PE13
FSMCD10
67
PE14
FSMCD11
DocID14220 Rev 6
45/50
49
UM0488
46/50
Pin name
68
PE15
FSMCD12
69
PB10
Smart_IO
70
PB11
Smart Reset
71
VSS_1
GND
72
VDD_1
+3V3
73
PB12
74
PB13
Audio I2S_CK
75
PB14
USB Disconnect
76
PB15
Audio I2S_DIN
77
PD8
FSMCD13
78
PD9
FSMCD14
79
PD10
FSMCD15
80
PD11
FSMCA16
81
PD12
FSMCA17
82
PD13
FSMCA18
83
VSS_8
GND
84
VDD_8
+3V3
85
PD14
FSMCD0
86
PD15
FSMCD1
87
PG2
FSMCA12
88
PG3
FSMCA13
89
PG4
FSMCA14
90
PG5
FSMCA15
91
PG6
FSMC_INT2
92
PG7
JOY_Select
93
PG8
User Button B4
94
VSS_9
GND
95
VDD_9
+3V3
96
PC6
97
PC7
98
PC8
99
PC9
MicroSD Card D1
100
PA8
101
PA9
USART1 TX
102
PA10
USART1 RX
DocID14220 Rev 6
UM0488
Pin name
103
PA11
USB DM
104
PA12
USB DP
105
PA13
Debug TMS
106
NC
107
VSS_2
GND
108
VDD_2
+3V3
109
PA14
Debug TCK
110
PA15
Debug TDI
111
PC10
112
PC11
113
PC12
114
PD0
FSMCD2
115
PD1
FSMCD3
116
PD2
117
PD3
JOY_Down
118
PD4
FSMCNOE
119
PD5
FSMCNWE
120
VSS_10
GND
121
VDD_10
+3V3
122
PD6
FSMCNWAIT
123
PD7
FSMCNE1
124
PG9
FSMCNE2
125
PG10
FSMCNE3
126
PG11
127
PG12
FSMCEBAR3
128
PG13
JOY_Right
129
PG14
JOY_Left
130
VSS_11
GND
131
VDD_11
+3V3
132
PG15
JOY_Up
133
PB3
Debug TDO
134
PB4
135
PB5
136
PB6
137
PB7
DocID14220 Rev 6
47/50
49
UM0488
48/50
Pin name
138
BOOT0
BOOT0
139
PB8
CAN RX
140
PB9
CAN TX
141
PE0
FSMCBLN0
142
PE1
FSMCBLN1
143
VSS_3
GND
144
VDD_3
+3V3
DocID14220 Rev 6
UM0488
Revision history
Revision history
Table 30. Document revision history
Date
Revision
Changes
5-May-2008
Initial release.
2-Jun-2008
20-Nov-2008
21-Jan-2010
01-Jul-2010
12-Aug-2013
Replaced schematics.
DocID14220 Rev 6
49/50
49
UM0488
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (ST) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to STs terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN STS TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT AUTHORIZED FOR USE IN WEAPONS. NOR ARE ST PRODUCTS DESIGNED OR AUTHORIZED FOR USE
IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH
PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR
ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED
FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASERS SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN
WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR AUTOMOTIVE,
AUTOMOTIVE SAFETY OR MEDICAL INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS.
PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE
CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
50/50
DocID14220 Rev 6