Documente Academic
Documente Profesional
Documente Cultură
APPLICATION:
FEATURES:
Measure the actual width of the runway beam and ensure the beam has a
similar rated capacity of the trolly.
Assemble the required number of spacer washers equally to the inside of the
trolley side plates so that the dimension between Trolley Wheel Flanges is 6mm
or less than the Runway Beam width.
Assemble the remaining washers outside the Trolley ensuring the protruding
hanger pin will not interfere with any obstacle along the runway.
Side plate and fit nuts to hanger pin make sure there must be one washer on
the inside and the outside of each trolley side plate.
Slacken off the hanger pin nuts and spread the side plates so that the wheels
can be slipped over the runway beam.
Screw nuts firmly against the washers, then suspend a light load from the
trolley to ensure that all four wheels are in contact with the runway beam.
Screw the nuts tightly against the washers then secure the lock nuts together.
For Geared Trolley when assembled at the minimum beam width will require
Hanger pin to be offset, so it will not interfere with the hand-wheel.
To test girder trolley when assembled suspend the maximum weight the
C
H
CODE
WLL
ton
BEAM SIZE
mm
MIN. RADIUS
OF CURVE
Wt.
mm
kg
mm
131005
0.5
64-140
0.8
5.5
228
196
190
108
131010
64-203
0.9
8.9
300
236
211
115
131015
76-210
1.0
10.7
318
273
236
130
131020
100-305
1.2
24.3
420
320
295
164
131025
100-305
1.3
36.3
444
366
334
177
131030
10
125-305
2.0
83.3
468
389
460
237
CODE
Wt.
ton
mm
kg
mm
DIMENSIONS
mm
131505
64-203
50N
14
287
236
211
115
131510
1.5-2
76-210
90N
16
305
273
236
130
131515
100-305
95N
24
420
320
295
164
131520
100-305
140N
36
426
366
334
177
131530
10
125-305
240N
90
450
389
460
237
Distributed By: