Documente Academic
Documente Profesional
Documente Cultură
Head office: 2nd floor, Solitaire plaza, beside Image Hospital, Ameerpet, Hyderabad
www.kresttechnology.com, E-Mail: krestinfo@gmail.com , Ph: 9885112363 /
040 44433434
AIM:
The aim of the project is to design a system to check the speed of the vehicles on
highways.
PURPOSE:
The purpose of the project is to implement system to control the high speed vehicles
in highways.
BLOCK DIAGRAM:-
LCD
POWER
SUPPLY
MICRO
CONTROLLER
IR-Rx 2
IR-Rx 1
IR-TX 2
IR-TX 1
POWER SUPPLY:
Step Down
Transformer
Bridge
Rectifier
Filter
Circuit
Regulator
section
Head office: 2nd floor, Solitaire plaza, beside Image Hospital, Ameerpet, Hyderabad
www.kresttechnology.com, E-Mail: krestinfo@gmail.com , Ph: 9885112363 /
040 44433434
DESCRIPTION:
A system designed to record and report on discrete activities within a process is called
as Tracking System. In the same procedure we have developed a methodology of vehicle
speed & direction system for robotics to control and achieve accurate direction speed for
a class of non-linear systems in the presence of disturbances and parameter variations by
using wireless communication technique.
In this methodology we are using a micro controller, resulting in the state trajectory
'sliding' along path-varying slides on the surface. This idealized control law achieves
perfect direction & speed however. The method is applied to the control of a two-link
manipulator handling variable loads in a flexible manufacturing system environment.
In our project we use IR sensors to detect the presence of a vehicle. According to this
project, 2 IR sensors are placed apart with a fixed known distance. Whenever IR rays are
interrupted by a vehicle during first sensor the count up timer is started. When the other
IR sensor senses the presence of vehicle, the count up timer is stopped. As the distance
and time the IR receiver receives the IR signals is noted by microcontroller and from that
we need to calculate speed. Here speed is calculated from the well known formula of
speed which is distance/time.
In this circuit we are using LCD display for indicating the speed. It is easy to set up
and supports the required hardware. To design a vehicle that supports the newest
technology available will be more expensive than boards that are already close to
obsolete.
HARDWARE COMPONENTS:
Micro controller
Power supply
Head office: 2nd floor, Solitaire plaza, beside Image Hospital, Ameerpet, Hyderabad
www.kresttechnology.com, E-Mail: krestinfo@gmail.com , Ph: 9885112363 /
040 44433434
LCD
IR Transmitter
IF Receiver
SOFTWARE TOOLS:
Keil u-Vision
Embedded C
Express PCB
ISP
APPLICATIONS:
1. Used in Industrial applications.
2. Used in General applications.
RESULT:
With this project we can design a system to control the high speed vehicles on
highways.
Head office: 2nd floor, Solitaire plaza, beside Image Hospital, Ameerpet, Hyderabad
www.kresttechnology.com, E-Mail: krestinfo@gmail.com , Ph: 9885112363 /
040 44433434