Documente Academic
Documente Profesional
Documente Cultură
txt
Close RequisitePro
To resolve this issue, unregister the richtx32.ocx file, replace it with the file
attached to this technote, and register the new file.
This error is the direct result of the richtx32.ocx being corrupt or not being
properly registered.
Resolving the problem
RqDatatoreGUI.Application::LaunchProjectOpen_->RqDatastoreGUI
Cause
Symptom
Thanks to:
Rich Locus Logicwurks, LLC www.logicwurks.com
(5) Right click the "Command Prompt" banner, and select "Run as Administrator"
(4) The search will bring up a number of items, including "Command Prompt" at the
top
(3) Click the Windows 7 Start Button and in the Search area, type "command"
(1) First, you must perform this on EVERY computer that has 2010
Did the following and seems to have worked. Aperently, I had to run CMD in
Administrator Mode, even though I am a local administrator.
1 down vote
Rich32.txt
on the system for any instances of richtx32.ocx
command prompt by selecting, Start > Run..., typing cmd and clicking OK
directories to the directory which the richtx32.ocx resides (in
Windows 2000 this would be C:\WINNT\system32) and enter the following
unregister the file:
Page 2
If you still receive the error, register the RichTx32.ocx module using the following
command (from Start, Run dialog):
regsvr32.exe %systemroot%\system32\RICHTX32.OCX
Note that the VB6 run-time distribution package from Microsoft does not include the
RichTx32.ocx ActiveX Control.
To resolve the problem, download RichTx32.zip. Unzip the archive and extract the
file RichTx32.ocx to the Windows\System32 folder.
This happens if the program uses Rich TextBox ActiveX Control (RichTx32.ocx), but
does not include the ActiveX file in the setup package.
When you run an application which was created in Visual Basic 6.0, the following
error message may occur and the program terminates.
Component RICHTX32.OCX or one of its dependencies not correctly registered: a file
is missing or invalid.
The problem should now be resolved and you should be able to open RequisitePro or
the project.
regsvr32 richtx32.ocx
Once the DllRegisterServer in richtx32.ocx succeeded message appears, click OK
C:\WINNT\system32
Enter the following command at the command prompt to register the richtx32.ocx
file:
regsvr32 -u richtx32.ocx
When the DllUnregisterServer in richtx32.ocx succeeded message appears, click
OK, rename the existing richtx32.ocx through Windows Explorer and any other
instances found on the system.
Download the richtx32.ocx file attached to this technote and save it into the
following directory:
Search
Open a
Change
Microsoft
command to