Documente Academic
Documente Profesional
Documente Cultură
surface SYSTEMS
Tubing Head
Adapter
Pack-off
Support Bushing
Upper Casing
Spool
Lower Casing
Head
Casing Hanger
Landing Base
Tubing
Hanger
Casing Hanger
T
he MBS casing hanger is a high-capacity, mandreltype hanger, which is rated to the full joint strength
of the suspended casing.
The hanger is designed with integral flutes which allow
cement returns to pass upward through the BOP stack.
Pack-off Bushing
T
he MBS pack-off bushing lands on the casing hanger
to seal the intermediate casing string(s) and support
the following casing or tubing string(s).
T
he inner seal on the bushing is a P Seal, which
is energized by plastic packing. This seal can be
re-energized, if necessary, throughout the life of the
well. The outer seal is a radially energized dovetail seal.
Inner and outer pack-off seals can be externally tested
immediately after the pack-off bushing is installed.
Tubing Hangers
T
he MBS tubing hanger lands on the pack-off bushing
and is locked in place with Type N lockdown screws.
S everal alternative tubing hangers are available,
including the coupling (HT and HT-2), tubingless (TLC),
mandrel (CXS and T) and dual (MB-CDT and MB-TLC)
versions. Control line options are available for most
applications. A comparison of these tubing hangers is
available on the MBS Tubing Hanger Comparison chart.
Auxiliary Equipment
C
amerons MBS system has a complement of
installation tools, including BOP test plugs, wear
bushings and handling tools.
MBS Pack-off
Support Bushing
MBS Fluted
Casing Hanger
MBS Emergency
Pack-off Support Bushing
IC-1 Emergency
Casing Hanger
we llhead opt i o ns
MBS Thread
MBS SlipLock
MBS CAMFORGE
surface SYSTEMS
HT Completion
HT-2 Completion
T Completion
TLC Completion
CXS Completion
si ngl e/ dual
type
body seal
neck seal
c o n t r o l l in e
HT
Single
Coupling
Elastomer
Elastomer
None
HT-2
Single
Rotatable Coupling
Elastomer
Elastomer
None
TLC
Single
Mandrel
Elastomer
Metal
None
CXS
Single
Mandrel
Elastomer
Elastomer
Optional, Non-continuous
Single
Mandrel
Elastomer
Metal
Optional, Continuous
MB-TLC
Dual
Split
Elastomer
Elastomer
None
MB-CDT
Dual
Split
Elastomer
Metal
Optional, Continuous
Surface Systems
PO Box 1212
Houston, Texas 77251-1212
USA
Tel
1.713.939.2211
5 Mondial Way
Harlington
Hayes, UB3 5AR
England, UK
Tel
44.208.990.1800
65.6861.3355
ENVIRONME
N
XCELLEN
LE
CE
TA
TH SAFETY
AL
A
HE
ND
CA
MERON
2011 Cameron | SlipLock and CAMFORGE are trademarks of Cameron. | SWP XM 01/12 AD00089