Documente Academic
Documente Profesional
Documente Cultură
Page 1 of 7
Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 140H MOTOR GRADER 5HM
Configuration: 140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY
3306B Engine
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productse... 06/01/2012
140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEBP2488 - 99) -... Page 2 of 7
S/N - 6TM366-UP
S/N - 6YN1-UP
S/N - 7MM249-UP
S/N - 8JM280-UP
S/N - 8MN500-UP
S/N - 8WN350-UP
S/N - 9EJ510-UP
S/N - 9JM350-UP
S/N - 9TN400-UP
S/N - 9YR330-UP
S/N - 9ZN205-UP
S/N - BDJ1-UP
S/N - XZH1-UP
S/N - XZJ1-UP
S/N - XZK1-UP
Problem
The transmission will not shift into any gear from the NEUTRAL position.
Probable Causes
z
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productse... 06/01/2012
140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEBP2488 - 99) -... Page 3 of 7
For information on the electronic control system, refer to the Power Train Electronic control System Systems
Operation, Testing and Adjusting.
Problem
The transmission has lost a single gear.
Probable Causes
z
For information on the electronic control system, refer to the Power Train Electronic control System Systems
Operation, Testing and Adjusting.
Problem
The motor grader has lost multiple forward/reverse gear selections..
Probable Causes
z
Wiring harness
Solenoids
For information on the electronic control system, refer to the Power Train Electronic control System Systems
Operation, Testing and Adjusting.
Problem
The transmission slips.
Probable Causes
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productse... 06/01/2012
140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEBP2488 - 99) -... Page 4 of 7
Solenoid
Worn clutch
Mechanical problem
For information on the electronic control system, refer to the Power Train Electronic control System Systems
Operation, Testing and Adjusting.
Problem
The motor grader creeps when the transmission modulator control is fully depressed.
Probable Causes
z
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productse... 06/01/2012
140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEBP2488 - 99) -... Page 5 of 7
For information on the electronic control system, refer to the Power Train Electronic control System Systems
Operation, Testing and Adjusting.
Problem
When the transmission shifts a hesitation occurs.
Probable Causes
z
Modulation orifice
Speed sensors
The oil viscosity has been changed and the transmission control valve has not been recalibrated.
For information on the electronic control system, refer to the Power Train Electronic control System Systems
Operation, Testing and Adjusting.
Problem
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productse... 06/01/2012
140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEBP2488 - 99) -... Page 6 of 7
Probable Causes
z
The oil viscosity has been changed and the transmission control valve has not been recalibrated.
For information on the electronic control system, refer to the Power Train Electronic control System Systems
Operation, Testing and Adjusting.
Problem
The transmission shifts are sluggish.
Probable Causes
z
Problem
The transmission shifts at the wrong point when the autoshift control is in the ON position.
Probable Causes
z
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productse... 06/01/2012
140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine(SEBP2488 - 99) -... Page 7 of 7
The electronic control module has the wrong transmission configuration code.
For information on the electronic control system, refer to the Power Train Electronic control System Systems
Operation, Testing and Adjusting.
Problem
The transmission does not shift into all the gears when the autoshift is in the ON position.
Probable Causes
z
Transmission control
For information on the electronic control system, refer to the Power Train Electronic control System Systems
Operation, Testing and Adjusting.
Problem
The transmission shifts into the wrong gear when the autoshift is in the ON position.
Probable Causes
z
For information on the electronic control system, refer to the Power Train Electronic control System Systems
Operation, Testing and Adjusting.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productse... 06/01/2012