Sunteți pe pagina 1din 2

OSHA 10/30 Hour Construction Course

Test/Answers
OSHA was established in what year? __1970_____
1. Name the OSHA Priority of Inspections.
IDLH,FAT/CAT,Complaints(formal/non formal), Repeat, Referral, High
Risk________________________________________
2. What is the 5 (a) (1) General Duty Clause of OSHA?_To assure every
working man/woman employment that is free from recognized
hazards that are likely to cause death/or serious physical Harm, and
to preserve our most precious natural resources
________________________________
3. If a Corporation or Company has a Fatality or
4. Catastrophe, how much time is required before it has to be
reported? _____8 hours_______
5. What is the Fall protection height for platforms or walkways in
construction?____6 Feet_________________
6. What is the fall protection height limitation on scaffolding in
construction?
7. What does PEL mean? Permissible Exposure Limit_____________
8. What does TWA mean?_Time Weighted Average___________
9. 10. What does TLV mean_Threshold Limit Value___________
10. What does IDLH mean?__Immediately Dangerous to Life or
Health__________
11. What is ANSI?_____American National Standards
Institute________________
12. What is DOT____Department of Transportation__________________
13. What is EPA_Environmental Protection
Agency_____________________
14. What is NEC__National Electrical Code___________________
15. What is CGA____Compressed Gas Association________________
16. What is NFPA___National Fire Protection Agency________________

17. What is ASME__American Society of Mechanical


Engineers________________
18. Does the OSHA electrical standard have a 5 (a) (1) General Duty
Clause within its standard? ___Yes___________
19. Give the definition for a Competant Person? ________________

S-ar putea să vă placă și