Documente Academic
Documente Profesional
Documente Cultură
Introduction
This Manual contains a short description of the changes and enhancements in the ArchiCAD 10
INT library. Below youll also find a list of new and updated library parts and the corresponding
user instructions. In addition to the new features, we have also fixed the inconsistencies reported
in the AC9 library. Please note that these corrections are not listed in this white paper.
Library
Library Format
The AC 10 object library is stored in the new library container (lcf) format, which loads
significantly faster then traditional libraries. Textures, LightWorks materials, background pictures
and list templates have been moved from the archive to a library folder so that they can be freely
unloaded or modified by users.
Compatibility
A version suffix (10) has been added to each library parts name. The objects main GUID
(Globally Unique ID) has also changed, enabling the new AC 10 library to be loaded together with
the ArchiCAD 9 library into legacy projects, without error messages. Consequently, the library
parts of old projects will not be replaced by the AC10 objects.
Each library part has been saved with a new fresh-looking preview picture
User Interface has been added to doors, windows, steel sections and many furniture
elements
The objects pen defaults were configured to match the new AC10 pen tables
New objects
The AC 10 library has 88 new elements, including concrete structures, steel sections, furniture,
landscape objects and many more. Moreover, the entire door and window library has been
renewed, which means an additional 126 new elements. Below you will find the complete list of
new library parts.
Folder Organization
We have revised the folder structure and the organization of the door and window library. The
new structure is based on the material, structure and the operation type of doors and windows.
While the new library contains fewer windows, these library parts actually result in more window
types due to the new parameters that have been added. Just one example: The AC9 library
included 22 casement window objects; in AC10, these have been fully integrated into only 9
elements, thanks to the new transom and sidelight parameters.
User interface
We have created a new, intuitive graphical user interface (UI) for all doors and windows to make
it easier and faster to set parameters. The most important features are:
The user interface contains the graphical representation of all parameters except the
Listing ones
A new "General" tab page is set as default in the custom settings dialog. This graphical
interface includes only the most commonly used parameters. In the early design stages,
most users can get by using just these parameters.
The illustrations on the user interface tab pages now show the real structure of the
window or door
Different groups of parameters are placed on separate tab pages for easier navigation.
UI pictures can now have a transparent background that shows up correctly on any
dialog background
Casing
Trim parameters have been renamed to casing. Casing structure has been corrected in 2D and
3D. The casing stops at the frame on both sides and does not extend behind the frame as one
piece. There is also an option for casing offset on both sides.
Masonry Arch
Masonry arch is a new feature of the AC 10 doors and windows. This parameter has five options:
masonry arch
masonry jack arch
masonry jack arch with keystone
masonry segmental arch
masonry segmental arch with keystone
Mitered Joint
Butt Joint
Windows
Window Size Setting
The Nominal size and the Unit size of the window are also displayed on the general UI
tab page
Tolerance is a new parameter with which you can define a gap between the wall opening
and the window unit
Two terrace doors can be found in the 1.2 Doors/Terrace Doors folder. They consist of a
terrace door combined with a window. These library parts can be placed with the Window
tool.
Tilt-Turn windows are also new in the AC 10 Library. The objects are located in the 1.3
Windows/Wood Plastic Windows/Tilt-Turn Windows folder.
Tilt-Turn Windows
Skylights
Location
O b j e c t L i b r a r y\1 . B A S I C L I B R A R Y \ 1 . 3 W i n d o w s \ D o r m e r s a n d S k yl i g h t s
List of objects
All the elements of the Dormers and Skylights folder except dormers
Features
We have added some long-missing features to the skylight objects:
There is a new parameter for lining (an interior casing to cover the roof edge around the
skylight)
The roof edge can have the following values: Vertical, Perpendicular, Horizontal and
Custom
Like doors and windows, skylights have different floor plan symbols: Projected, Projected
with overhead, Symbolic view, Outlines Only, Overhead all. Note that for skylights, these
options are available as an option of the Floor Plan symbol parameter.
All skylights have a detailed graphical user interface.
Napkin Disposal
Safety Railing 01-02-03
Seat Cover Dispenser
Soap Dispenser 01-02
Toilet Paper Disp 02-03
Towel Dispensers
Waste Receptacle
Windows
Window Size Setting
The Nominal size and the Unit size of the window are also displayed on the general UI
tab page
Tolerance is a new parameter with which you can define a gap between the wall opening
and the window unit
Two terrace doors can be found in the 1.2 Doors/Terrace Doors folder. They consist of a
terrace door combined with a window. These library parts can be placed with the Window
tool.
Tilt-Turn windows are also new in the AC 10 Library. The objects are located in the 1.3
Windows/Wood Plastic Windows/Tilt-Turn Windows folder.
Tilt-Turn Windows
Skylights
Location
O b j e c t L i b r a r y\1 . B A S I C L I B R A R Y \ 1 . 3 W i n d o w s \ D o r m e r s a n d S k yl i g h t s
List of objects
All the elements of the Dormers and Skylights folder except dormers
Features
We have added some long-missing features to the skylight objects:
There is a new parameter for lining (an interior casing to cover the roof edge around the
skylight)
The roof edge can have the following values: Vertical, Perpendicular, Horizontal and
Custom
Like doors and windows, skylights have different floor plan symbols: Projected, Projected
with overhead, Symbolic view, Outlines Only, Overhead all. Note that for skylights, these
options are available as an option of the Floor Plan symbol parameter.
All skylights have a detailed graphical user interface.
Napkin Disposal
Safety Railing 01-02-03
Seat Cover Dispenser
Soap Dispenser 01-02
Toilet Paper Disp 02-03
Towel Dispensers
Waste Receptacle
Features
Sanitary Objects
Furniture
Lockers
Location
O b j e c t L i b r a r y\1 . B A S I C L I B R A R Y \ 1 . 1 F u r n i s h i n g \ C a b i n e t s a n d S h e l ve s
List of objects
Lockers
Features
The object has an option for setting the number of lockers horizontally and vertically
The size of the locker units can be adjusted with parameters and editable hotspots
Four available door styles
Audience Seating
Location
O b j e c t L i b r a r y\1 . B A S I C L I B R A R Y \ 1 . 1 F u r n i s h i n g \ C h a i r s
List of objects
Audience Seating
Features
The object is fully editable with hotspots, so it can be used to quickly furnish large
auditoriums
There are options for staggered and even rows
The slope of the floor can be adjusted
2 leg types
Hotspot Editing
3D view
Kitchen cabinets
Location
O b j e c t L i b r a r y\1 . B A S I C L I B R A R Y \ 1 . 1 F u r n i s h i n g \ K i t c h e n C a b i n e t s
List of objects
All the elements of the Kitchen Cabinet folder
Features
Credenza
Credenza MultiDrawer
Cupboard
Wall Cabinet
Features
Beds
Location
O b j e c t L i b r a r y\1 . B A S I C L I B R A R Y \ 1 . 1 F u r n i s h i n g \ B e d s
List of objects
Bed 01
Bed 02
Bed Bunk
Bed Canopy
Bed Double 01
Bed Double 02
Features
Building Structures
Concrete Structures
Location
O b j e c t L i b r a r y\1 . B A S I C L I B R A R Y \ 1 . 4 B u i l d i n g S t r u c t u r e s \ C o n c r e t e
structures
List of objects
Beams
Precast Beam I 01-02
Precast Beam Inv Tee
Precast Beam Ledger
Precast Beam Rect 01-02
Precast Beam T
Precast Double Tee
Precast Single Tee
Columns
Precast Column
Precast Haunched Column
Foundation
Foundation
Precast Sleeve Found
Slabs
Precast Slab
Features
Precast Beams
Steel Structures
Location
O b j e c t L i b r a r y\1 . B A S I C L I B R A R Y \ 1 . 4 B u i l d i n g S t r u c t u r e s \ S t e e l S t r u c t u r e
List of objects
Frames
Double Slope
Inclined Beam
Inclined Column
Lean-to
Single Slope
Steel Joists
Parallel Chords 1-2
Top Chord Pitched-1Way 1-2
Top Chord Pitched-2Way 1-2
Steel Sections\Curved Beams
Curved Steel Beams
Par Flange Channels Curved
Univ Columns Beam Curved
Universal Beams Curved
Light Steel Beams
Lipped C Section Beam
Plain C Section Beam
Z Section Beam
Light Steel Columns
Lipped C Section Column
Plain C Section Column
Z Section Column
Features
In addition to the AC9 steel elements we have developed Curved Beams, Light Steel
Beams and Light Steel Columns
Standard steel section sizes can be selected from a parameter value list
Insertion Point of the beam is optional: Top, Center, Bottom
Different cutting plane directions can be set for both ends of the beams
Cutting planes can be adjusted with hotspots on the floor plan for horizontal beams
Floor plan symbol options:
o Axis line on/off
o Show only axis line
New Graphical User Interface
New pictures have were added to the UI tab pages to explain the direction of cutting
planes
Ramps
Location
O b j e c t L i b r a r y\1 . B A S I C L I B R A R Y \ 1 . 4 B u i l d i n g S t r u c t u r e s \ S t r u c t u r a l
Elements
List of objects
Curved Ramp 02
Straight Ramp
Features
Chimney Rect
Chimney Round
Wall Hole Symbol
Wall Niche Symbol
Features
Downspout Complex
Downspout Elbow
Downspout Offset
Downspout
Gutter Head Leader
Gutter
Features
House Model
Features
Steel Ladders
Location
O b j e c t L i b r a r y\1 . B A S I C L I B R A R Y \ 1 . 5 S p e c i a l C o n s t r u c t i o n s \ L a d d e r s
List of objects
Caged Ladder
Platform with Ladder
Ship Ladder 60
Vertical Ladder
Wall Mounted Ladder
Features
Features
The PlotMaker 9 drawing titles are implemented as parametric GDL objects in AC 10.
The objects are available from the Drawing Tool when the layout window is active.
Trees
Location
O b j e c t L i b r a r y\2 . V I S U A L I Z A T I O N \ 2 . 2 S i t e I m p r o ve m e n t s \ G a r d e n
List of objects
Tree Deciduous 01-12
Features
Street Furniture
Location
O b j e c t L i b r a r y\2 . V I S U A L I Z A T I O N \ 2 . 2 S i t e I m p r o ve m e n t s \ P a r k a n d S t r e e t
List of objects
Bollard
Post-Box 1
Post-Box 2
Trash Can 1
Trash Can 2
Trash Container
Features
Bollard: 7 styles
Bollard: Graphical User Interface
Post box 2: 3 styles
Post box 2: Options for number of rows and columns
Bollard types