Documente Academic
Documente Profesional
Documente Cultură
Variable Area
Flow Meters
Type 335, Type 350
Short Version
Special Version
Benefits
Variable area flow meters a reliable, accurate and economical
measuring principle.
Variable area flow meters from GF Piping Systems are radially installed dismountable meters for flow measuring in
industrial piping applications. The measurement ranges, which are attuned to our customers needs, and the range of
materials available for the tubes and connection ends, mean that the flow meters can be used for a wide range of
applications and a great variety of media.
Main advantages
The flowmeters require no auxiliary power
Cost effective to measure the flow rate
Break-proof and corrosion-resistant
Accessories like sensor 4-20 mA and limit contacts
G=A+K
Guiding rod from DN50 for stabilisation of float within volume flow
Low pressure loss
Can be used for liquids and gases
Volume- and % scale as standard
Segments
Water Treatment
Chemical Process Industry
Microelectronics
Food & Beverage
Ship Building
Building technology
And many more
Features
Know your flow
All the flow meters are equipped with a double scale: a percentage scale as well as a scale for the flow volume in l/h
for water (H2 O). Special scales are on offer for m/h, GPM, in addition to special graduations for HCL, NaOH, air and can
be affixed on taper tubes without scales subsequently. Measuring accuracy falls in the accuracy class 4 according
to VDE/VDI 3513 Part 2.
Flow immediately
visible with setpoint
indicators
System details
The float measuring principle accurate flow measurement of liquids
and gases.
If a medium flows upwards at a sufficient rate of flow
through the vertically mounted taper tube, the float
is raised to the point at which a state of equilibrium
sets in between the lifting force of the medium and the
weight of the float. Since the mean rate of flow is
proportional to the quantity flowing through per unit
of time, this state of equilibrium corresponds to the
measurement of the instantaneous flow rate.
Accurate reading
Before installing
shipping.
bled.
functionality.
Accessories
at 20C.
Technical Data
The most important data at a glance.
The VDE/VDI 3513 Part 2 guideline describes the procedure for converting the scales of variable area flow meters.
It takes into account all material and flow parameters including pressure, temperature, density and viscosity.
GF Piping Systems offer you tables to accommodate changed operating conditions. You can find the tables in the
GF Piping Systems Planning Fundamentals.
Temperature range
10
20
30
40
50
60
70
80
90
100
1,6
1,9
2,2
2,5
2,9
3,1
3,4
3,7
4,0
Taper tube
Union
PVC-U
PVC-U
0 60C
PA
PVC-U
0 60C
PSU
PVC-U
0 60C
PSU
PVDF
0 90C
PVDF
PVDF
0 100C
50 500
100 - 1000
150 1500
250 2500
200 2000
300 3000
22,84
22,84
22,84
22,84
24,99
24,99
600 6000
1000 - 10000
1500 - 15000
2000 20000
3000 - 30000
8000 - 60000
24,99
24,99
28,23
45,67
45,67
47,24
Base
Acid
Chemical
Anorganica
PVC-U
PA
PSU
PVDF
PEEK
SS
phosphoric acid
H3PO4
75%
sulfuric acid
H2SO4
<90%
nitric acid
HNO3
<55%
nitric acid
HNO3
67%
hydrofluoric acid
HF
<70%
hydrochloric acid
HCl
36%
ammonia
NH4OH
25%
caustic potash
KOH
<50%
caustic soda
NaOH
<50%
ferric chloride
FeCl3
sodium hydrochloride
NaOCl
15%
sodium bisulfite
NaHSO3
<40%
hydrogen peroxide
H2O2
35%
Organica
til saturation
formic acid
HCOOH
85%
acetic acid
CH3COOH
85%
formaldehyde
H2CO
<40%
<50%
glycol
acetone
undiluted
ethanol, methanol
undiluted
aliphatic hydrocarbons
undiluted
X: recommended
O: with limitations
-: not recommended
For higher or lower concentrations than mentioned in the list or entry O, please contact gss@georgfischer.com
Table of Contents
Page
Variable Area Flow Meter Type 335
- without magnet in the materials PVC-U, PA and PSU
- with magnet in the materials PVC-U, PA and PSU
8
9
10
11
12
12
13
13
Accessories
- Limit contacts GK10 und GK11
- Sensor 4-20 mA GK15
- Special scales
14
14
17
Spare Parts
- Type 335
- Type 350
- Short version
23
27
32
Adjustment Factors 34
[l/h]
50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000
300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000
2000 - 20000
3000 - 30000
8000 - 60000
50
50
63
63
63
75
75
75
Scale range
[l/h]
50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000
300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000
2000 - 20000
3000 - 30000
8000 - 60000
32
32
40
40
50
DN
[mm]
[mm]
40
40
50
50
50
83
83
101
101
101
135
135
135
Taper tube in
Polysulfone Orings in EPDM
Code
58
58
72
72
83
Taper tube in
Polyamid O-rings
in EPDM
Code
L1
[mm]
385
385
393
393
403
403
403
417
417
417
429
429
429
[mm]
25
25
32
32
40
Taper tube in
PVC-U transp. Orings in EPDM
Code
L2
[mm]
341
341
341
341
341
341
341
341
341
341
341
341
341
[mm]
335
335
335
335
335
335
335
335
335
335
335
335
335
[inch]
1 12
1 12
2
2
2 14
2 14
2 14
2 34
2 34
2 34
3 12
3 12
3 12
[l/h]
50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000
300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000
2000 - 20000
3000 - 30000
8000 - 60000
32
32
40
40
50
50
50
63
63
63
75
75
75
Scale range
[l/h]
50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000
300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000
2000 - 20000
3000 - 30000
8000 - 60000
DN
[mm]
[mm]
40
40
50
50
50
83
83
101
101
101
135
135
135
Taper tube in
Polysulfone Orings in EPDM
Code
58
58
72
72
83
Taper tube in
Polyamid O-rings
in EPDM
Code
L1
[mm]
385
385
393
393
403
403
403
417
417
417
429
429
429
[mm]
25
25
32
32
40
Taper tube in
PVC-U transp. ORings in EPDM
Code
L2
[mm]
341
341
341
341
341
341
341
341
341
341
341
341
341
[mm]
335
335
335
335
335
335
335
335
335
335
335
335
335
[inch]
1 12
1 12
2
2
2 14
2 14
2 14
2 34
2 34
2 34
3 12
3 12
3 12
[l/h]
50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000
300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000
2000 - 20000
3000 - 30000
8000 - 60000
50
50
63
63
63
75
75
75
Scale range
[l/h]
50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000
300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000
2000 - 20000
3000 - 30000
8000 - 60000
10
32
32
40
40
50
DN
[mm]
[mm]
40
40
50
50
50
83
83
101
101
101
135
135
135
Taper tube in
Polysulfone Orings in EPDM
Code
58
58
72
72
83
Taper tube in
Polyamid O-rings
in EPDM
Code
L1
[mm]
400
400
408
408
418
418
418
432
432
432
444
444
444
[mm]
25
25
32
32
40
Taper tube in
PVC-U transp. Orings in EPDM
Code
L2
[mm]
356
356
356
356
356
356
356
356
356
356
356
356
356
[mm]
350
350
350
350
350
350
350
350
350
350
350
350
350
[inch]
1 12
1 12
2
2
2 14
2 14
2 14
2 34
2 34
2 34
3 12
3 12
3 12
[l/h]
50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000
300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000
2000 - 20000
3000 - 30000
8000 - 60000
32
32
40
40
50
50
50
63
63
63
75
75
75
Scale range
[l/h]
50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000
300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000
2000 - 20000
3000 - 30000
8000 - 60000
DN
[mm]
[mm]
40
40
50
50
50
83
83
101
101
101
135
135
135
Taper tube in
Polysulfone Orings in EPDM
Code
58
58
72
72
83
Taper tube in
Polyamid O-rings
in EPDM
Code
L1
[mm]
400
400
408
408
418
418
418
432
432
432
444
444
444
[mm]
25
25
32
32
40
Taper tube in
PVC-U transp. ORings in EPDM
Code
L2
[mm]
356
356
356
356
356
356
356
356
356
356
356
356
356
[mm]
350
350
350
350
350
350
350
350
350
350
350
350
350
[inch]
1 12
1 12
2
2
2 14
2 14
2 14
2 34
2 34
2 34
3 12
3 12
3 12
11
!"#$%&'#()"*
+,"-$%)*%./0+%1)$!"2$%3-4*'$
5)$!%(",&'*$%6'3'*$%("67'$(%./89:%3'$#)6
;"<',=
> !"#!$!%&'$(!)$*(+*,$,!)'$"!$#&-,.$/(&,."(+'$#!$.,0%,'&
?@A'
<
0B
2//3
2//3
2+4-3
56$78
56$79
56$7;
56$:8
56$:9
56$:;
56$?8
56$?9
56$?;
56$?@
9:
9:
9:
;8
;8
;8
@;
@;
@;
@;
;<7$=$;7
7$=$78
98$=$988
>$=$>8
97$=$978
;8$=$;88
97$=$978
@8$=$@88
78$=$788
988$=$9888
HIJ%JKL%LHK
HIJ%JKL%LHH
HIJ%JKL%LHM
HIJ%JKL%LHL
HIJ%JKL%LHN
HIJ%JKL%LHO
HIJ%JKL%LHP
HIJ%JKL%LHQ
HIJ%JKL%LHJ
HIJ%JKL%LHI
?@A'
RH
RM
SA
2//3
2//3
2//3
2//3
2"!A-3
9BB
9BB
9BB
;;@
;;@
;;@
;78
;78
;78
;78
9?9
9?9
9?9
9B9
9B9
9B9
;8:
;8:
;8:
;8:
$LTJ
$LTJ
$LTJ
$HTM
$HTM
$HTM
9
9
9
9
9:7
9:7
9:7
9>7
9>7
9>7
;88
;88
;88
;88
HIJ%JKH%JJK
HIJ%JKH%JJH
HIJ%JKH%JJM
HIJ%JKH%JJL
HIJ%JKH%JJN
HIJ%JKH%JJO
HIJ%JKH%JJP
HIJ%JKH%JJQ
HIJ%JKH%JJJ
HIJ%JKH%JJI
@7
@7
@7
C@
C@
C@
:8
:8
:8
:8
?-A'#%$2C'%)*
./89:%$#-*(AG
E9#)*4(%)*%F.0;
8"<'
56$78
56$79
56$7;
56$:8
56$:9
56$:;
56$?8
56$?9
56$?;
56$?@
98
98
98
97
97
97
;7
;7
;7
;7
6-,'%#-*4' ?-A'#%$2C'%)*
.",@(2,D"*'%E9
#)*4(%)*%F.0;
8"<'
!"#$%&'#()"*
+,"-$%)*%./0+%1)$!%3-4*'$
5)$!%(",&'*$%6'3'*$%("67'$(%./89:%3'$#)6
;"<',=
> !"#!$!%&'$(!)$*(+*,$,!)'$"!$#&-,.$/(&,."(+'$#!$.,0%,'&
> 5%"&(D+,1+"/"&$'E"&A-,'$',,$(AA,''#.",'$F#.$*(."(D+,$(.,($F+#E$/,&,.'
?@A'
<
0B
2//3
2//3
2+4-3
6-,'%#-*4' ?-A'#%$2C'%)*
.",@(2,D"*'%E9
#)*4(%)*%F.0;
8"<'
56$788
56$798
56$7;8
56$:88
56$:98
56$:;8
56$?88
56$?98
56$?;8
56$?@8
98
98
98
97
97
97
;7
;7
;7
;7
?@A'
1
;<7$=$;7
7$=$78
98$=$988
>$=$>8
97$=$978
;8$=$;88
97$=$978
@8$=$@88
78$=$788
988$=$9888
1
HIJ%JKH%JIK
HIJ%JKH%JIH
HIJ%JKH%JIM
HIJ%JKH%JIL
HIJ%JKH%JIN
HIJ%JKH%JIO
HIJ%JKH%JIP
HIJ%JKH%JIQ
HIJ%JKH%JIJ
HIJ%JKH%JII
HIJ%JKL%LMK
HIJ%JKL%LMH
HIJ%JKL%LMM
HIJ%JKL%LML
HIJ%JKL%LMN
HIJ%JKL%LMO
HIJ%JKL%LMP
HIJ%JKL%LMQ
HIJ%JKL%LMJ
HIJ%JKL%LMI
RH
RM
SA
2//3
2//3
2//3
2//3
2"!A-3
56$788
56$798
56$7;8
56$:88
56$:98
56$:;8
56$?88
56$?98
56$?;8
56$?@8
12
9:
9:
9:
;8
;8
;8
@;
@;
@;
@;
@7
@7
@7
C@
C@
C@
:8
:8
:8
:8
1
9BB
9BB
9BB
;;@
;;@
;;@
;78
;78
;78
;78
1
9?9
9?9
9?9
9B9
9B9
9B9
;8:
;8:
;8:
;8:
1
9:7
9:7
9:7
9>7
9>7
9>7
;88
;88
;88
;88
1
$LTJ
$LTJ
$LTJ
$HTM
$HTM
$HTM
9
9
9
9
1
?-A'#%$2C'%)*
./89:%$#-*(AG
E9#)*4(%)*%F.0;
8"<'
A'6)-,%&'#()"*%./0+9U.
+,"-$%)*%.?+F%1)$!"2$%3-4*'$
5)$!%D2()"*%(A)4"$(%V8+WXS
?@A'
<
0B
2//3
2//3
2+4-3
2G(+4/"!3
56$?8
56$?9
56$?@
56$;8
56$;9
56$@8
56$@9
56$C8
56$C9
@;
@;
@;
78
78
:@
:@
?7
?7
6-,'%#-*4'
;7
;7
;7
C8
C8
78
78
:7
:7
1
6-,'%#-*4' ?-A'#%$2C'%)*
.",@(2,D"*'%E9
#)*4(%)*%+.;
8"<'
8<@=8<B
8<C=9<@
8<:=@<7
;<7=98<8
C<8=9><8
C<C=@:<8
C<C=C8<8
><8=78<8
98<8=?;<8
?@A'
RH
RM
SA
2//3
2//3
2//3
2//3
2"!A-3
:>$=$;8C
B8$=$;B7
9@:$=$?B7
7:>$=$;;?@
B8B$=$C8B9
9888$=$>9C;
9888$=$B8B9
9>C>$=$99@:C
;;?@$=$9:@:C
1
HIJ%JKQ%MKI
HIJ%JKQ%MHK
HIJ%JKQ%MKM
HIJ%JKQ%MKL
HIJ%JKQ%MKN
HIJ%JKQ%MKO
HIJ%JKQ%MKP
HIJ%JKQ%MKQ
HIJ%JKQ%MKJ
1
56$?8
56$?9
56$?@
56$;8
56$;9
56$@8
56$@9
56$C8
56$C9
:8
:8
:8
>@
>@
98@
98@
9;;
9;;
@9>
@9>
@9>
C::
C::
C?;
C?;
CB7
CB7
;88
;88
;88
@@7
@@7
@@7
@@7
@@7
@@7
9
9
9
9$HTM
9$HTM
;
;
;$HTM
;$HTM
A'6)-,%&'#()"*%./0+
+,"-$%)*%./0+%Y#'<Z%1)$!"2$%3-4*'$
H"/,!'"#!$I$(!)$I9$#!+J$*(+")$F#.$'#AK,&$A#!!,A&"#!
H"/,!'"#!$I;$),'A."D,'$&(L,.$&%D,$+,!G&?@A'
<
0B
2//3
2//3
2+4-3
56$98
56$99
56$;8
56$;9
56$@8
56$@9
56$C8
56$C9
@;
@;
78
78
:@
:@
?7
?7
6-,'%#-*4'
;7
;7
C8
C8
78
78
:7
:7
?@A'
R%YXS9
2//3
2//3
2//3
56$98
56$99
56$;8
56$;9
56$@8
56$@9
56$C8
56$C9
78$=$788
988$=$9888
;88$=$;888
@88$=$@888
:88$=$:888
9;88$=$9;888
;888$=$;8888
@888$=$@8888
1
:8
:8
>@
>@
98@
98@
9;;
9;;
?-A'#%$2C'%)*
./0+%E9#)*4(%)*
+.;%D2()"*
("67'$
8"<'
?-A'#%$2C'%)*
./0+%E9#)*4(%)*
+.;%XS%D2()"*
(A)4"$
8"<'
HIJ%JKP%NPP
HIJ%JKP%NPQ
HIJ%JKP%NPJ
HIJ%JKP%NPI
HIJ%JKP%NQK
HIJ%JKP%NQH
9
9
HIJ%JKL%IKO
HIJ%JKL%IKP
HIJ%JKL%IKQ
HIJ%JKL%IKJ
HIJ%JKL%IKI
HIJ%JKL%IHK
HIJ%JKL%IHH
HIJ%JKL%IHM
@>7
@>7
C8@
C8@
C9?
C9?
C;B
C;B
Z RH
RM
SA
2//3
2//3
2"!A-3
CC@
CC@
C7B
C7B
C:9
C:9
C7@
C7@
@C9
@C9
@C9
@C9
@@B
@@B
@C9
@C9
@@7
@@7
@@7
@@7
@@7
@@7
@@7
@@7
9
9
9$HTM
9$HTM
;
;
;$HTM
;$HTM
13
Accessories
Limit contacts
Function elements GK 15
Top
Bottom
max. contact(GK11)
closed
open
min. contact(GK10)
open
closed
A
B
D
C
E
A:
B:
Sensor GK15
C:
Cable plug
D:
Dove tail
E:
14
Assembly instructions GK 15
Technical data
Supply voltage:
Current consumption:
<50 mA
Load resistor:
Current output:
4-20 mA (3 wire)
Safety class:
IP65
Ambient temperature:
0 C to +50 C
Connection:
Measurement accuracy:
<1%
Electrical connection
Pin1:
Pin2:
Pin3:
Dimensions
15
4-20 mA sensor
For type 335 and type 350
Type
GK 15
GK 15
GK 15
GK 15
GK 15
GK 15
GK 15
GK 15
GK 15
GK 15
GK 15
GK 15
GK 15
DN
[mm]
32
32
40
40
50
50
50
63
63
63
75
75
75
[mm]
25
25
32
32
40
40
40
50
50
50
65
65
65
Code
[l/h]
50-500
100-1000
150-1500
250-2500
200-2000
300-3000
600-6000
600-6000
1000-10000
1500-15000
Code
GK10 (min.)
GK11 (max.)
16
DN
[mm]
32
32
40
40
50
50
50
63
63
63
75
75
75
Scale range
[mm]
40
40
50
50
50
25
25
32
32
40
65
65
65
Code
[l/h]
300-3000
600-6000
600-6000
1000-10000
1500-15000
50-500
100-1000
150-1500
250-2500
200-2000
DN
[mm]
32
32
40
40
50
50
50
63
63
63
75
75
75
Scale range
[mm]
40
40
50
50
50
25
25
32
32
40
65
65
65
10-100 %
10-100 %
10-100 %
10-100 %
10-100 %
10-100 %
10-100 %
10-100 %
10-100 %
10-100 %
10-100 %
10-100 %
13.3-100 %
Code
[l/h]
50-500
100-1000
150-1500
250-2500
200-2000
300-3000
600-6000
600-6000
1000-10000
1500-15000
DN
[mm]
Scale range
[mm]
Corresponds to
water scale
[m/h]
Code
[l/h]
32
32
40
40
50
50
50
63
63
63
75
75
75
25
25
32
32
40
40
40
50
50
50
65
65
65
0.05 - 0.5
0.1 - 1
0.15 - 1.5
0.25 - 2.5
0.2 - 2.0
0.3 - 3
0.6 - 6
0.6 - 6
1 - 10
1.5 - 15
2 - 20
3 - 30
8 - 60
50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000
300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000
17
DN
[mm]
32
32
40
40
50
50
50
63
63
63
75
75
75
Scale range
[mm]
40
40
50
50
50
25
25
32
32
40
65
65
65
[gal/min]
0,183 - 1,83
0,366 - 3,66
0,55 - 5,5
0,916 - 9,16
0,733 - 7,33
50-500
100-1000
150-1500
250-2500
200-2000
1,09 - 10,9
2,19 - 21,9
2,2 - 22
3,66 - 36,6
5,49 - 54,9
Code
[l/h]
300-3000
600-6000
600-6000
1000-10000
1500-15000
7,32 - 73,2
10,98 - 109,8
29,28 - 219,6
DN
[mm]
Scale range
[mm]
Corresponds to
water scale
[gal/min]
Code
[l/h]
32
32
40
40
50
50
50
63
63
63
75
75
75
40
40
50
50
50
25
25
32
32
40
65
65
65
1.32 - 13.2
2.64 - 26.4
2.64 - 26.4
4.40 - 44.02
6.60 - 66.04
0.22 - 2.2
0.44 - 4.4
0.66 - 6.6
1.1 - 11
0.88 - 8.8
8.80 - 88
13.20 - 132
35.2 - 264
300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000
50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000
DN
[mm]
Scale range
[mm]
Corresponds to
water scale
[m/h]
Code
[l/h]
50
50
63
63
63
75
75
75
18
32
32
40
40
50
25
25
32
32
40
40
40
50
50
50
65
65
65
1.5 - 14
2.5 - 29
4 - 45
7 - 79
6 - 58
9 - 108
17 - 174
17 - 175
29 - 301
53 - 405
55 - 545
80 - 758
50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000
300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000
DN
[mm]
32
32
40
40
50
50
50
63
63
63
75
75
75
Scale range
[mm]
40
40
50
50
50
25
25
32
32
40
65
65
65
[l/h]
20 - 405
55 - 866
90 - 1340
165 - 2310
115 - 1660
190 - 3050
420 - 4900
430 - 5090
750 - 9460
1415 - 11570
Code
[l/h]
300-3000
600-6000
600-6000
1000-10000
1500-15000
1500 - 17300
2175 - 24120
-
50-500
100-1000
150-1500
250-2500
200-2000
DN
[mm]
32
32
40
40
50
50
50
63
63
63
75
75
75
Scale range
[mm]
40
40
50
50
50
25
25
32
32
40
65
65
65
[l/h]
4 - 226
15 - 600
30 - 970
70 - 1800
35 - 1240
75 - 2370
230 - 4000
240 - 4700
475 - 7340
1030 - 10330
Code
[l/h]
300-3000
600-6000
600-6000
1000-10000
1500-15000
915 - 11720
1195 - 16040
-
50-500
100-1000
150-1500
250-2500
200-2000
DN
[mm]
32
32
40
40
50
50
50
63
63
63
75
75
75
Scale range
[mm]
25
25
32
32
40
40
40
50
50
50
65
65
65
[l/h]
1 - 55
3 - 192
6 - 365
15 - 770
8 - 520
15 - 1170
50 - 2270
55 - 2300
140 - 4340
420 - 5820
245 - 7590
400 - 11120
Code
[l/h]
50-500
100-1000
150-1500
250-2500
200-2000
300-3000
600-6000
600-6000
1000-10000
1500-15000
19
Scale range
SK 50 / 500
SK 51 / 510
SK 52 / 520
SK 60 / 600
SK 61 / 610
SK 62 / 620
SK 70 / 700
SK 71 / 710
SK 72 / 720
SK 73 / 730
Code
[l/h]
2.5 - 25.0
5.0 - 50.0
10.0 - 100.0
8.0 - 80.0
15.0 - 150.0
20.0 - 200.0
15.0 - 150.0
30.0 - 300.0
50.0 - 500.0
100.0 - 1000.0
Scale range
SK 50 / 500
SK 51 / 510
SK 52 / 520
SK 60 / 600
SK 61 / 610
SK 62 / 620
SK 70 / 700
SK 71 / 710
SK 72 / 720
SK 73 / 730
Code
[gal/min]
0,01 - 0,11
0,02 - 0,22
0,04 - 0,44
0,03 - 0,35
0,06 - 0,66
0,08 - 0,88
0,06 - 0,66
0,13 - 1,32
0,22 - 2,20
0,44 - 4,40
Scale range
SK 50 / 500
SK 51 / 510
SK 52 / 520
SK 60 / 600
SK 61 / 610
SK 62 / 620
SK 70 / 700
SK 71 / 710
SK 72 / 720
SK 73 / 730
Code
[m/h]
0,5 - 0,95
0,5 - 1,9
0,8 - 3,0
0,6 - 2,8
1,4 - 5,6
1,5 - 7,0
1,0 - 6,5
1,5 - 11,0
3,0 - 18,0
6,0 - 30,0
Scale range
SK 50 / 500
SK 51 / 510
SK 52 / 520
SK 60 / 600
SK 61 / 610
SK 62 / 620
SK 70 / 700
SK 71 / 710
SK 72 / 720
SK 73 / 730
20
Code
[l/h]
2,5 - 20
5 - 40
10 - 85
8 - 70
15 - 125
20 - 170
5 - 125
30 - 260
50 - 425
100 - 850
Scale range
SK 50 / 500
SK 51 / 510
SK 52 / 520
SK 60 / 600
SK 61 / 610
SK 62 / 620
SK 70 / 700
SK 71 / 710
SK 72 / 720
SK 73 / 730
Code
[l/h]
0.2 - 5
1 - 14
3 - 35
2 - 23
3 - 55
5 - 80
3 - 55
6 - 130
10 - 250
40 - 590
Scale range
SK 60 / 600
SK 61 / 610
SK 62 / 620
SK 70 / 700
SK 71 / 710
SK 72 / 720
SK 73 / 730
[l/h]
0,2 - 3,5
0,5 - 10
0,5 - 16
0,5 - 11
1 - 33
2 - 80
10 - 220
Code
198 806 531
198 806 532
198 806 533
198 806 534
198 806 535
198 806 536
198 806 537
21
Pos.
Item
Quantity
1
2
3
4
5
6
7
8
9*
10**
Taper tube
Float
Bottom insert
Top insert
Union nut
Union end
O-Ring
Flow value indicator
Limit contact
Guiding rod
1
1
1
1
2
2
2
2
2
1
* optional
** only for DN50 (1500-15000 l/h) and DN65
(all metering ranges)
22
[l/h]
50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000
300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000
2000 - 20000
3000 - 30000
8000 - 60000
Inch DN
[mm]
50
50
63
63
63
32
32
40
40
50
75
75
75
[mm]
1 12
1 12
2
2
2
1
1
1 14
1 14
1 12
2 12
2 12
2 12
40
40
50
50
50
25
25
32
32
40
PVC-U
transparent
Code
Polyamid
Code
Polysulfon
Code
65 198335065*
65 198335066*
65 198335067*
PVC-U
transparent
Code
Polyamid
Code
Polysulfon
Code
[l/h]
50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000
300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000
2000 - 20000
3000 - 30000
8000 - 60000
Inch DN
[mm]
32
32
40
40
50
50
50
63
63
63
75
75
75
[mm]
1
1
1 14
1 14
1 12
1 12
1 12
2
2
2
2 12
2 12
2 12
25
25
32
32
40
40
40
50
50
50
65 198335265*
65 198335266*
65 198335267*
23
[l/h]
50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000
300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000
2000 - 20000
3000 - 30000
8000 - 60000
Inch DN
[mm]
32
32
40
40
50
50
50
63
63
63
75
75
75
[mm]
1
1
1 14
1 14
1 12
1 12
1 12
2
2
2
2 2
2 12
2 12
25
25
32
32
40
40
40
50
50
50
Scale range
Inch DN
50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000
300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000
2000 - 20000
3000 - 30000
8000 - 60000
[mm]
50
50
63
63
63
32
32
40
40
50
75
75
75
1 12
1 12
2
2
2
1
1
1 14
1 14
1 12
2 12
2 12
2 12
25
25
32
32
40
[l/h]
50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000
300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000
2000 - 20000
3000 - 30000
8000 - 60000
Inch DN
[mm]
32
32
40
40
50
50
50
63
63
63
75
75
75
[mm]
1
1
1 14
1 14
1 12
1 12
1 12
2
2
2
2 12
2 12
2 12
25
25
32
32
40
40
40
50
50
50
Without magnet
Code
With magnet
(bistabil)
Code
24
1500 - 15000
2000 - 20000
3000 - 30000
8000 - 80000
[mm]
63
75
75
75
Inch DN
[mm]
2
2 12
2 12
2 12
50
65
65
65
40
40
50
50
50 198 335 893
[mm]
bottom (3)
Code
[l/h]
top (4)
Code
Peek
Code
Stainless steel
Code
PVDF
Code
[l/h]
[mm]
1500 - 15000
2000 - 20000
3000 - 30000
8000 - 60000
63
75
75
75
Inch DN
[mm]
2
2 12
2 12
2 12
50
65
65
65
for PEEK
Code
for PVDF/SS
Code
[mm]
32
40
50
63
75
Inch DN
[mm]
1
1 4
1 12
2
2 12
25
32
40
50
65
Flow value
indicator
Code
O-rings (7)
d
[mm]
32
40
50
63
75
Inch DN
[mm]
1
1 4
1 12
2
2 12
25
32
40
50
65
EPDM
Code
FPM
Code
[mm]
32
40
50
63
75
Inch DN
[mm]
1
1 4
1 12
2
2 12
25
32
40
50
65
PVC-U
Code
PVC-C
Code
ABS
Code
PP-H
Code
PVDF
Code
[mm]
32
40
50
63
75
Inch DN
[mm]
1
1 14
1 12
2
2 12
25
32
40
50
65
PVC-U
Code
PVC-C
Code
ABS
Code
PP-H
Code
PVDF
Code
25
[mm]
32
40
50
63
75
Inch DN
[mm]
1
1 4
1 12
2
2 12
25
32
40
50
65
PP-H
Code
PVDF
Code
Exchange kit
Model:
Exchange kitconsisting of: guiding rod, insert guiding rod andinsert bottom
Only for DN50 (1'500 - 15'000 l/h) and DN65 (all metering ranges)
Scale range
[l/h]
1500 - 15000
2000 - 20000
3000 - 30000
8000 - 80000
[mm]
63
75
75
75
Inch DN
[mm]
2
2 12
2 12
2 12
50
65
65
65
Code
26
[l/h]
50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000
300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000
2000 - 20000
3000 - 30000
8000 - 60000
Inch DN
[mm]
50
50
63
63
63
32
32
40
40
50
75
75
75
[mm]
1 12
1 12
2
2
2
1
1
1 14
1 14
1 12
2 12
2 12
2 12
40
40
50
50
50
25
25
32
32
40
PVC-U
transparent
Code
Polyamid
Code
Polysulfon
Code
65 198350065*
65 198350066*
65 198350067*
PVC-U
transparent
Code
Polyamid
Code
Polysulfon
Code
[l/h]
50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000
300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000
2000 - 20000
3000 - 30000
8000 - 60000
Inch DN
[mm]
32
32
40
40
50
50
50
63
63
63
75
75
75
[mm]
1
1
1 14
1 14
1 12
1 12
1 12
2
2
2
2 12
2 12
2 12
25
25
32
32
40
40
40
50
50
50
65 198350265*
65 198350266*
65 198350267*
27
[l/h]
50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000
300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000
2000 - 20000
3000 - 30000
8000 - 60000
Inch DN
[mm]
32
32
40
40
50
50
50
63
63
63
75
75
75
[mm]
1
1
1 14
1 14
1 12
1 12
1 12
2
2
2
2 2
2 12
2 12
25
25
32
32
40
40
40
50
50
50
Scale range
Inch DN
50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000
300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000
2000 - 20000
3000 - 30000
8000 - 60000
[mm]
50
50
63
63
63
32
32
40
40
50
75
75
75
1 12
1 12
2
2
2
1
1
1 14
1 14
1 12
2 12
2 12
2 12
25
25
32
32
40
[l/h]
50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000
300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000
2000 - 20000
3000 - 30000
8000 - 60000
Inch DN
[mm]
32
32
40
40
50
50
50
63
63
63
75
75
75
[mm]
1
1
1 14
1 14
1 12
1 12
1 12
2
2
2
2 12
2 12
2 12
25
25
32
32
40
40
40
50
50
50
Without magnet
Code
With magnet
Code
28
1500 - 15000
2000 - 20000
3000 - 30000
8000 - 60000
[mm]
63
75
75
75
Inch DN
[mm]
2
2 2
2 12
2 12
50
65
65
65
40
40
50
50
50 198 335 893
[mm]
bottom (3)
Code
[l/h]
top (4)
Code
Peek
Code
Stainless steel
Code
PVDF
Code
[l/h]
[mm]
1500 - 15000
2000 - 20000
3000 - 30000
8000 - 60000
63
75
75
75
Inch DN
[mm]
2
2 12
2 12
2 12
50
65
65
65
for PEEK
Code
for PVDF/SS
Code
[mm]
32
40
50
63
75
Inch DN
[mm]
1
1 4
1 12
2
2 12
25
32
40
50
65
Flow value
indicator
Code
O-rings (7)
d
[mm]
32
40
50
63
75
Inch DN
[mm]
1
1 4
1 12
2
2 12
25
32
40
50
65
EPDM
Code
FPM
Code
[mm]
32
40
50
63
75
Inch DN
[mm]
1
1 4
1 12
2
2 12
25
32
40
50
65
PVC-U
Code
PVC-C
Code
ABS
Code
PP-H
Code
PVDF
Code
[mm]
32
40
50
63
75
Inch DN
[mm]
1
1 14
1 12
2
2 12
25
32
40
50
65
PVC-U
Code
PVC-C
Code
ABS
Code
PP-H
Code
PVDF
Code
29
[mm]
32
40
50
63
75
Inch DN
[mm]
1
1 4
1 12
2
2 12
25
32
40
50
65
PP-H
Code
PVDF
Code
Exchange kit
Model:
Exchange kitconsisting of: guiding rod, insert guiding rod andinsert bottom
Only for DN50 (1'500 - 15'000 l/h) and DN65 (all metering ranges)
Scale range
[l/h]
1500 - 15000
2000 - 20000
3000 - 30000
8000 - 80000
[mm]
63
75
75
75
Inch DN
[mm]
2
2 12
2 12
2 12
50
65
65
65
Code
30
Item
Quantity
1
2
3
4
5
6
7
8
Taper tube
Float
Bottom insert
Top insert
Union nut
Union end
O-Ring
Flow value indicator
1
1
1
1
2
2
2
2
SK 10/100
242
SK 11/110
242
SK 12/120
242
SK 18/180
255
SK 19/190
255
SK 20/200
255
SK 21/210
255
SK 29/290
254
SK 30/300
305
SK 31/310
305
Type
SK 40/400
312
SK 41/410
312
SK 50/500
44
SK 51/510
44
SK 52/520
44
Type
SK 60/600
83
SK 61/610
83
SK 62/620
83
SK 70/700
46
SK 71/710
46
SK 72/720
46
SK 73/730
46
31
SK 50 / 500
SK 51 / 510
SK 52 / 520
SK 60 / 600
SK 61 / 610
DN
[mm]
SK 62 / 620
SK 70 / 700
SK 71 / 710
SK 72 / 720
SK 73 / 730
16
16
16
20
20
20
32
32
32
32
Code
[mm]
10
10
10
15
15
15
25
25
25
25
SK 50 / 500
SK 51 / 510
SK 52 / 520
SK 60 / 600
SK 61 / 610
DN
[mm]
SK 62 / 620
SK 70 / 700
SK 71 / 710
SK 72 / 720
SK 73 / 730
16
16
16
20
20
20
32
32
32
32
Code
[mm]
10
10
10
15
15
15
25
25
25
25
SK 50 / 51 / 52
SK 60 / 61 / 62
SK 70 / 71 / 72 / 73
DN
[mm]
Code
[mm]
16
20
32
[mm]
16
20
32
DN
[mm]
Code
32
Type
SK 73
[mm]
32
DN
[mm]
Code
[mm]
16
20
32
DN
[mm]
Code
33
Adjustment Factors
Temperature-adjustment table for gases
10
20
30
40
50
60
70
80
Operating
1.018
1.035
1.052
1.07
1.088
1.103
1.12
1.135
temperature
10
0.983
1.018
1.035
1.051
1.068
1.084
1.1
1.116
(C)
20
0.965
0.983
1.015
1.032
1.05
1.065
1.08
1.096
30
0.948
0.966
0.983
1.015
1.031
1.047
1.062
1.08
40
0.933
0.95
0.967
0.984
1.015
1.031
1.046
1.061
50
0.92
0.936
0.953
0.968
0.984
1.015
1.03
1.045
60
0.905
0.922
0.938
0.953
0.968
0.985
1.015
1.03
70
0.892
0.907
0.924
0.94
0.955
0.97
0.985
1.014
80
0.88
0.895
0.912
0.927
0.943
0.965
0.971
0.987
Tc = calibrating temperature
To = operating temperature
Note:
Operating temperature >calibrating temperature:
Factor<1
Operating temperature<calibrating temperature:
Factor >1
operating
gasses
[kg/Nm ]
air
oxygen
nitrogen
ammonia
acetylene
chlorine
air
1.293
1.000
1.050
0.983
0.772
0.953
1.580
oxygen
1.429
0.953
1.000
0.935
0.735
0.906
1.500
nitrogen
1.251
1.017
1.069
1.000
0.786
0.968
1.604
ammonia
0.771
1.295
1.360
1.272
1.000
1.232
2.040
acetylene
1.171
1.050
1.105
1.033
0.812
1.000
1.660
chlorine
3.220
0.633
0.665
0.623
0.490
0.603
1.000
hydrogen
0.089
3.810
4.010
3.750
2.940
3.630
6.020
carbon dioxide
1.977
0.808
0.850
0.796
0.625
0.770
1.275
sulphur dioxide
2.926
0.668
0.698
0.654
0.514
0.633
1.050
coal gas
0.550
1.532
1.610
1.506
1.185
1.460
2.420
propane
2.020
0.800
0.841
0.786
0.618
0.762
1.262
34
operating
gasses
carbon
sulphur
[kg/Nm ]
hydrogen
dioxide
dioxide
coal gas
propane
air
1.293
0.262
1.238
1.495
0.652
1.250
oxygen
1.429
0.250
1.175
1.430
0.621
1.189
nitrogen
1.251
0.267
1.255
1.530
0.664
1.272
ammonia
0.771
0.340
1.600
1.946
0.845
1.620
acetylene
1.171
0.276
1.300
1.580
0.685
1.314
chlorine
3.220
0.166
0.785
0.953
0.413
0.792
hydrogen
0.089
1.000
4.715
5.725
2.480
4.760
carbon dioxide
1.977
0.212
1.000
1.216
0.528
1.010
sulphur dioxide
2.926
0.174
0.823
1.000
0.433
0.830
coal gas
0.550
0.403
1.895
2.306
1.000
1.915
propane
2.020
0.210
0.990
1.205
0.522
1.000
Use this chart to adjust the displayed values for gaseous media of your flow meter, if the specific media gravity differs
from the underlying specific gravity (1.293 kg/Nm3 (air)) at calibrating time.
Example:
Specific gravity at calibrating time is 1.293 kg/Nm
(air). The media hydrogen with its specific gravity of
0.089 kg/Nm should be measured. From the column
hydrogen, in line seven for operating gas, you get the
factor 3.81 . The values shown by the flow meter have
to be multiplied by this factor so the actual flow volume
at a specific gravity of 0.089 kg/Nm can be calculated.
3
Note:
Operating gas density>calibrating gas density:
Factor <1
Operating gas density <calibrating gas density:
Factor >1
0.5
0.6
0.7
0.8
0.9
1.1
1.2
Density of
0.5
1.105
1.2
1.29
1.38
1.464
1.545
1.63
operating
0.6
0.903
1.084
1.168
1.248
1.32
1.397
1.475
liquid
0.7
0.834
0.923
1.078
1.15
1.22
1.29
1.36
0.8
0.775
0.856
0.928
1.066
1.133
1.196
1.262
0.9
0.724
0.802
0.87
0.937
1.06
1.12
1.18
1.0
0.683
0.755
0.818
0.883
0.94
1.055
1.114
1.1
0.645
0.715
0.771
0.836
0.892
0.946
1.055
1.2
0.613
0.678
0.735
0.793
0.845
0.896
0.947
1.3
0.585
0.648
0.7
0.755
0.807
0.857
0.903
0.955
1.4
0.56
0.62
0.671
0.723
0.773
0.82
0.865
0.913
1.5
0.537
0.595
0.645
0.695
0.743
0.787
0.832
0.877
1.6
0.515
0.57
0.618
0.665
0.712
0.755
0.798
0.84
1.7
0.496
0.548
0.595
0.641
0.685
0.726
0.767
0.81
1.8
0.478
0.538
0.574
0.617
0.66
0.7
0.74
0.78
1.9
0.462
0.511
0.555
0.597
0.638
0.676
0.715
0.755
2.0
0.446
0.495
0.536
0.578
0.617
0.654
0.691
0.73
35
1.3
1.4
1.5
1.6
1.7
1.8
1.9
Density of
0.5
1.71
1.785
1.86
0.94
2.02
2.09
2.16
2.24
operating
0.6
1.545
1.615
1.68
0.754
1.82
1.89
1.95
2.02
liquid
0.7
1.425
1.49
1.55
1.615
1.68
1.745
18
1.865
0.8
1.325
1.38
1.43
1.5
1.56
1.62
1.67
1.73
0.9
1.24
1.295
1.35
1.405
1.46
1.515
1.57
1.62
1.0
1.17
1.22
1.27
1.325
1.375
1.43
1.48
1.53
1.1
1.106
1.155
1.2
1.255
1.3
1.35
1.4
1.45
1.2
1.05
1.095
1.14
1.19
1.235
1.28
1.33
1.37
1.3
1.044
1.088
1.134
1.176
1.22
1.264
1.305
1.4
0.958
1.042
1.085
1.13
1.17
1.21
1.25
1.5
0.92
0.96
1.042
1.084
1.125
1.16
1.205
1.6
0.882
0.92
0.958
1.04
1.08
1.11
1.15
1.7
0.848
0.886
0.923
0.961
1.038
1.072
1.11
1.8
0.817
0.853
0.888
0.926
0.962
1.032
1.07
1.9
0.79
0.826
0.858
0.897
0.93
0.968
1.034
2.0
0.798
0.798
0.83
0.867
0.9
0.935
0.965
Use this chart to adjust the displayed values for liquid media of your flow meter, if the specific media gravity
(1.0 kg/l (water)) differs from the underlying specific gravity at calibrating time.
Example:
Specific gravity at calibration 1.0 kg/l.The liquid media
with a specific gravity of 0.9 kg/l is to be measured.
If you have a calibrating solution of 1.0 kg/l you take
in line five the factor 1.06. The values shown by the
flow meter have to be multiplied by this factor so the
actual flow volume at a specific gravity of 0.9 can be
calculated.
Note:
New density is higher: factor<1
Newdensity is lower : factor >1
36
Notes:
Notes:
Terms of Payment
The Purchaser shall make payment in the manner agreed by the parties without any deductions
such as discounts, costs, taxes or dues.
8.2 The Purchaser may only withhold or off-set payments due against counter claims which are either
expressly acknowledged by Georg Fischer or finally awarded to the Purchaser.
In particular, payment shall still be made when unessential items are still outstanding provided
that the Products already delivered are not rendered unusable as a result.
9
9.1
Retention of Title
The Products shall remain the property of Georg Fischer until the Purchaser shall have settled all
claims, present and future, which Georg Fischer may have against him.
9.2 Should the Purchaser resell Products to which title is reserved, in the ordinary course of
business, he shall hereby be deemed to have tacitly assigned to Georg Fischer the proceeds
deriving from their sale together with all collateral rights, securities and reservations of title until
all claims held by Georg Fischer shall have been settled. Until revoked by Georg Fischer, this
assignment shall not preclude Purchasers right to collect the assigned receivables.
9.3 To the extent the value of the Products to which title is reserved together with collateral securities
exceeds Georg Fischers claims against the Purchaser by more than 20%, Georg Fischer shall
re-assign the above proceeds to Purchaser at his request.
10 Delivery
10.1 The term of delivery shall commence as soon as the contract has been entered into, all official
formalities such as import and payment permits have been obtained and all essential technical issues have been settled. The term of delivery shall be deemed duly observed when, upon its expiry,
the Products are ready for despatch.
10.2 Delivery is subject to the following conditions, i.e. the term of delivery shall be reasonably extended:
a) if Georg Fischer are not supplied in time with the information necessary for the execution of the
contract or if subsequent changes causing delays are made by the Purchaser.
b) if Georg Fischer are prevented from performing the contract by force majeure. Force majeure
shall equally be deemed to be any unforeseeable event beyond Georg Fischers control which
renders Georg Fischers performance commercially unpractical or impossible, such as delayed
or defective supplies from sub contractors labour disputes, governmental orders or regulati ons, shortages in materials or energy, serious disturbances in Georg Fischers works, such
as the total or partial destruction of plant and equipment or the breakdown of essential facili ties, serious disruptions in transport facilities, e.g. impassable roads.
Should the effect of force majeure exceed a period of six (6) months, either party may cancel the
contract forthwith.
Georg Fischer shall not be liable for any damage or loss of any kind whatsoever resulting the
refrom, any suspension or cancellation being without prejudice to Georg Fischers right to
recover all sums due in respect of consignments delivered and costs incurred to date.
c) if the Purchaser is in delay with the fulfilment of his obligations under the contract, in particular,
if he does not adhere to the agreed conditions of payment or if he has failed to timely provide the
agreed securities.
10.3 If for reasons attributable to Georg Fischer the agreed term of delivery or a reasonable extension
thereof is exceeded, Georg Fischer shall not be deemed in default until the Purchaser has granted
to Georg Fischer in writing a reasonable extension thereof of not less than one (1) month which
equally is not met.
The Purchaser shall then be entitled to the remedies provided at law, it being however understood
that, subject to limitations of Art. 16, damage claims shall be limited to max. 10% of the price of the
delayed delivery.
10.4 Part shipments shall be allowed and Georg Fischer shall be entitled to invoice for such partial
deliveries.
10.5 If the Purchaser fails to take delivery within a reasonable time of Products notified as ready for
despatch, Georg Fischer shall be entitled to store the Products at the Purchasers expense and
risk and to invoice them as delivered. If Purchaser fails to effect payment, Georg Fischer shall be
entitled to dispose of the Products.
10.6 Should Purchaser cancel an order without justification and should Georg Fischer not insist on
the performance of the contract, Georg Fischer shall be entitled to a penalty amounting to 10% of
the contract price, Georg Fischers right to prove and claim higher damages remaining reserved.
Purchaser shall be entitled to prove, that Georg Fischer has suffered no or a considerably lower
damage than the penalty forfeited.
11 Packing
If the Products are provided with additional packing over and above the standard packing, such
packing shall be charged additionally.
12 Passing of Risk
12.1 The risk in the Products shall pass to the Purchaser as soon as they have left Georg Fischers
works (EX WORKS, Incoterms 2010 ICC, or latest version), even if delivery is made carriage-paid,
under similar clauses or including installation or when carriage is organized and managed by
Georg Fischer.
12.2 If delivery is delayed for reasons beyond Georg Fischers control, the risk shall pass to the
Purchaser when he is notified that the Products are ready for despatch.
13
13.1
13.2
Limitation of Liability
The rights and remedies of the customer shall be exclusively governed by these General
Conditions of Supply and shall be in lieu of any remedies at law. All further claims for damages,
reduction of the purchase price, termination of or rescission of the contract are excluded.
In no case whatsoever shall the customer be entitled to claim damages other than compensation
for costs of remedying defects in the supplies. This in particular refers, but shall not be limited, to
loss of production, loss of use, loss of orders, loss of profit, third party recovery claims and other
direct or indirect or consequential damages.
This limitation of liability equally applies to the extent Georg Fischer is liable for acts or omissions
of its employees or third parties engaged for the performance of its obligations. It does not apply in
case unlawful intent or gross negligence on the part of Georg Fischers management and in case
of Georg Fischers statutory liability, in particular under applicable product liability laws.
17 Severability
Should any term or clause of these General Conditions in whole or in part be found to be
unenforceable or void, all other provisions shall remain in full force and effect and the
unenforceable or void provision shall be replaced by a valid provision, which comes closest
to the original intention of the unenforceable or invalid provision.
18 Place of Performance and Jurisdiction
18.1 Place of performance for the Products shall be the Georg Fischer works from which the Products
are despatched.
18.2 The contract shall be governed by Swiss law without regard to conflict of law provisions that would
require the application of another law.
18.3 Any civil action based upon any alleged breach of this contract shall be filed and prosecuted
exclusively in the courts of Schaffhausen, Switzerland.
Georg Fischer however reserves the right to file actions in any court having jurisdiction over
controversies arising out of or in connection with the present contract.
03/2011
China
Georg Fischer
Piping Systems Ltd Shanghai
Pudong, Shanghai 201319
Phone +86(0)21 58 13 33 33
china.ps@georgfischer.com
www.georgfischer.cn
Denmark/Iceland
Georg Fischer A/S
2630 Taastrup
Phone +45 (0)70 22 19 75
info.dk.ps@georgfischer.com
www.georgfischer.dk
Finland
Georg Fischer AB
01510 VANTAA
Phone +358 (0)9 586 58 25
Fax +358 (0)9 586 58 29
info.fi.ps@georgfischer.com
www.georgfischer.fi
France
Georg Fischer SAS
95932 Roissy Charles de Gaulle Cedex
Phone +33(0)1 41 84 68 84
fr.ps@georgfischer.com
www.georgfischer.fr
Germany
Georg Fischer GmbH
73095 Albershausen
Phone +49(0)7161 302-0
info.de.ps@georgfischer.com
www.georgfischer.de
India
Georg Fischer Piping Systems Ltd
400 076 Mumbai
Phone +91 224007 2001
in.ps@georgfischer.com
www.georgfischer.in
Italy
Georg Fischer S.p.A.
20063 Cernusco S/N (MI)
Phone +3902 921 861
it.ps@georgfischer.com
www.georgfischer.it
700.671.353
GFDO_6168_4b (12.12)
Georg Fischer Piping Systems Ltd.
8201 Schaffhausen/Switzerland, 2009
Printed in Germany
www.piping.georgfischer.com
Norway
Georg Fischer AS
1351 Rud
Phone +47(0)67 18 29 00
no.ps@georgfischer.com
www.georgfischer.no
Korea
Georg Fischer Piping Systems
271-3 Seohyeon-dong Bundang-gu
Seongnam-si, Gyeonggi-do
Seoul 463-824
Phone +82 31 8017 1450
Fax
+82 31 8017 1454
kor.ps@georgfischer.com
www.georgfischer.kr
Poland
Georg Fischer Sp. z o.o.
05-090 Sekocin Nowy
Phone +48(0)22 31 31 0 50
poland.ps@georgfischer.com
www.georgfischer.pl
Malaysia
George Fischer (M) Sdn. Bhd.
40460 Shah Alam, Selangor Darul Ehsan
Phone +60 (0)3 5122 5585
my.ps@georgfischer.com
www.georgfischer.my
Mexico/Northern Latin America
Georg Fischer S.A. de C.V.
Apodaca, Nuevo Leon
CP66636 Mexico
Phone +52 (81)1340 8586
Fax +52 (81)1522 8906
mx.ps@georgfischer.com
www.georgfischer.mx
Middle East
Georg Fischer
Piping Systems (Switzerland) Ltd.
Dubai, United Arab Emirates
Phone +971 4 289 49 60
gcc.ps@georgfischer.com
www.export.georgfischer.com
Netherlands
Georg Fischer N.V.
8161 PA Epe
Phone +31(0)578 678 222
nl.ps@georgfischer.com
www.georgfischer.nl
Romania
Georg Fischer
Piping Systems (Switzerland) Ltd.
020257 Bucharest - Sector 2
Phone +40(0)21 230 53 80
ro.ps@georgfischer.com
www.export.georgfischer.com
Switzerland
Georg Fischer
Rohrleitungssysteme (Schweiz) AG
8201 Schaffhausen
Phone +41(0)52 631 30 26
ch.ps@georgfischer.com
www.piping.georgfischer.ch
Taiwan
Georg Fischer Co., Ltd.
San Chung Dist., New Taipei City
Phone +886 2 8512 2822
Fax
+886 2 8512 2823
www.georgfischer.tw
United Kingdom/Ireland
George Fischer Sales Limited
Coventry, CV2 2ST
Phone +44(0)2476 535 535
uk.ps@georgfischer.com
www.georgfischer.co.uk
Russia
Georg Fischer
Piping Systems (Switzerland) Ltd.
Moscow 125047
Tel. +7 495 258 60 80
ru.ps@georgfischer.com
www.georgfischer.ru
USA/Caribbean
Georg Fischer LLC
Tustin, CA 92780-7258
Phone +1(714) 731 88 00
Toll Free 800 854 40 90
us.ps@georgfischer.com
www.gfpiping.com
Singapore
George Fischer Pte Ltd
528 872 Singapore
Phone +65(0)67 47 06 11
sgp.ps@georgfischer.com
www.georgfischer.sg
Vietnam
George Fischer Pte Ltd
136E Tran Vu, Ba Dinh District, Hanoi
Phone +84 4 3715 3290
Fax
+84 4 3715 3285
Spain/Portugal
Georg Fischer S.A.
28046 Madrid
Phone +34(0)91 781 98 90
es.ps@georgfischer.com
www.georgfischer.es
Sweden
Georg Fischer AB
117 43 Stockholm
Phone +46(0)8 506 775 00
info.se.ps@georgfischer.com
www.georgfischer.se
International
Georg Fischer
Piping Systems (Switzerland) Ltd.
8201 Schaffhausen/Switzerland
Phone +41(0)52 631 30 03
Fax +41(0)52 631 28 93
info.export@georgfischer.com
www.export.georgfischer.com