Documente Academic
Documente Profesional
Documente Cultură
Date
Version1
27/02/14
First release
P.Vince
12/03/14
P.Vince
26/03/2014
P.Vince
27/03/2014
P.Vince
08/04/2014
P.Vince
08/04/2014
P.Vince
14/04/2014
P.Vince
17/06/2014
P.Vince
14/07/2014
P.Vince
29/08/2014
10
P.Vince
19/09/2014
11
P.Vince
Edited by
Version of the Device Profile Document is indicated by a whole number incremented with each new release. The most recent version number should
match the Device Profile Document Version Number (item 1.1.6) in the Current Device Settings Table.
Contents
1
DEVICE PROPERTIES......................................................................................................4
1.1
Device Identification..................................................................................................5
1.2
COMMUNICATIONS.................................................................................................7
1.3
HEALTH-CHECK.....................................................................................................14
1.4
ANALOGUE POINTS..............................................................................................17
1.5
COUNTER POINTS................................................................................................21
1.6
BINARY POINTS.....................................................................................................22
1.7
LIMIT PROFILES....................................................................................................23
1.8
RATE OF CHANGE.................................................................................................24
1.9
1.10
1.11
DATA LOGGING......................................................................................................27
1.12
APPLICATION PROGRAMS...................................................................................30
1.13
CONFIGURATION..................................................................................................31
1.14
DEVICE PROPERTIES
Unless otherwise noted, multiple boxes in the second column below should be selected for each
parameter to indicate all capabilities supported or required. Parameters without checkboxes in the
second column do not have capabilities and are included so the current value may be shown in the
third column.
The items listed in the capabilities column below may be configurable to any of the options
selected, or set to a fixed value when the device was designed. Below is a list of abbreviations for
the possible ways in which the configurable parameters may be set. Since some parameters may
not be accessible by each of these methods supported, an abbreviation for the configuration
methods supported by each parameter is shown in the fourth column of the tables below.
This document may be used to show the device capabilities, the current value of each parameter,
or both. If it is used to show the current values, the third column should be filled in even if a fixed
parameter is selected in the capabilities section (NA may be entered for parameters that are Not
Applicable).
If this document is used to show the current value of each parameter, the Current Value column
applies to a single connection between a Master Station and Field Device. If the device has
multiple or backup connections to other WITS devices that you wish to show in the Device Profile
Document, see section 8.3.2 ReferenceDevice and AuxillaryInfo of DNP3 Volume 8
Interoperability or duplicate the entire Device Profile Document for each communication link to a
logical or physical WITS Device.
1.1
1.1.1
Device Identification
Device Function:
1.1.2
Vendor Name:
Capabilities
Master Station
Current Value
If configurable,
list methods
-
Field Device
ABB Limi
Page 5
17/09/14
1.1
1.1.3
Device Identification
Device Name:
Capabilities
AquaMaster3
Current Value
If configurable,
list methods
-
Page 6
17/09/14
1.1
Device Identification
Capabilities
Current Value
If configurable,
list methods
1.1.4
01.01.00
1.1.5
02.00.06
Page 7
17/09/14
1.1
1.1.6
Device Identification
Device Profile Document Version
Number:
Capabilities
Current Value
If configurable,
list methods
11
1.1
Page 8
17/09/14
1.2
1.2.1
COMMUNICATIONS
Supports outgoing connections:
Capabilities
Yes
Current Value
If configurable,
list methods
No
Yes
No
Always
Never (outgoing connections only)
Periodic
Page 9
17/09/14
1.2
COMMUNICATIONS
Capabilities
Current Value
If configurable,
list methods
1.2.5
1.2.6
1.2.7
Page 10
17/09/14
1.2
1.2.8
COMMUNICATIONS
Capabilities
classified
as
dial-up
Current Value
If configurable,
list methods
-
On Demand
Page 11
17/09/14
1.2
1.2.9
COMMUNICATIONS
Supports DNS:
Capabilities
Current Value
If configurable,
list methods
Yes
No
No
None
Fixed at
____________
Configurable, range ________ to
________
Configurable, selectable from 5, 15, 30, 60, 120,
Page 12
17/09/14
1.2
COMMUNICATIONS
Capabilities
Current Value
If configurable,
list methods
-
Yes
No
None
Page 13
17/09/14
1.2
COMMUNICATIONS
Capabilities
Current Value
If configurable,
list methods
Page 14
17/09/14
Dual
Initiating
Listening
IPv6 (UDP)
IPv6 (TCP)
IPv4 (UDP)
Network
Dial-up
Network
Dial-up
GPRS
Network
Network Protocol
Name
Direct
Port Number
On Demand
IPv4 (TCP)
Permanent
Page 15
17/09/14
1.3
1.3.1
HEALTH-CHECK
Detects supply failure:
Capabilities
Yes
No
1.3.2
Current Value
If configurable,
list methods
Yes
No
Low voltage threshold:
Fixed at
____________
Configurable, range 5.0 to 15.0V
Configurable, selectable from _____, _____,
_____
Configurable, other, describe
__________________
Hysteresis for low voltage threshold:
Fixed at 0 (enter 0 if no hysteresis)
Configurable, range 5.0 to 15.0V
Configurable, selectable from _____, _____,
_____
Configurable, other, describe
__________________
Page 16
17/09/14
1.3
1.3.3
HEALTH-CHECK
Detects I/O failure:
Capabilities
Current Value
If configurable,
list methods
Yes
Describe failures that are detected: ADC, others
No
1.3.4
Yes
Describe when attached attach
Describe when detached detach
No
1.3.5
Page 17
17/09/14
Bit
Description
Asserted
Cleared
Action
By
Action
By
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
10
FD
FD
11
FD
FD
12
FD
FD
13
Empty pipe
FD
FD
14
Mains failure
FD
FD
15
FD
FD
16
High flow
FD
FD
17
Low flow
FD
FD
18
FD
FD
FD
FD
19 29
30
Not used
ABB internal alarm 30
Page 18
17/09/14
1.4
1.4.1
ANALOGUE POINTS
Number of limits:
Capabilities
Current Value
If configurable,
list methods
-
Page 19
17/09/14
1.4
1.4.2
ANALOGUE POINTS
Limit types:
Capabilities
Limit 1:
Not
supported
Limit 2:
Not
supported
Limit 3:
Not
supported
Limit 4:
Not
supported
Limit 5:
Not
supported
Limit 6:
Not
supported
Limit 7:
Not
supported
Limit 8:
Not
supported
Limit 9:
Not
supported
Limit 10:
Not
supported
Current Value
Low
High
Configurable
Low
High
Configurable
Low High
Configurable
Low High
Configurable
Low
High
Configurable
Low
High
Configurable
Low
High
Configurable
Low
High
Configurable
Low
High
Configurable
Low
High
Configurable
If configurable,
list methods
-
Page 20
17/09/14
1.4
1.4.3
ANALOGUE POINTS
Capabilities
Current Value
Not supported
Hysteresis:
If configurable,
list methods
1.4.4
Not supported
Persistence:
1.4.5
Not supported
1.4.6
Not supported
1.4.7
1.4.8
30000
Yes
No
Page 21
17/09/14
1.4
1.4.9
ANALOGUE POINTS
Capabilities
Current Value
Yes
If configurable,
list methods
No
Integer
Unsigned integer
Single precision floating point
1.5
1.5.1
Capabilities
COUNTER POINTS
Number of limits:
Current Value
If configurable,
list methods
Yes
No
Page 22
17/09/14
1.6
1.6.1
1.6.2
1.6.3
BINARY POINTS
Supports overriding binary input
points:
Supports overriding double-bit binary
input points:
Capabilities
Yes
Yes
Yes
1.6.4
Persistence:
Not supported
1.6.5
No
No
If configurable,
list methods
No
Current Value
Page 23
17/09/14
1.7
1.7.1
LIMIT PROFILES
Supports limit profiles:
Capabilities
Yes
Current Value
If configurable,
list methods
No
1.7.2
Page 24
17/09/14
1.8
1.8.1
1.8.2
1.8.3
1.8.4
RATE OF CHANGE
Supports rate of change on analogue
points:
Supports rate of change on counter
points:
Supports no change detection on
analogue points:
Supports no change detection on
counter points:
Capabilities
Yes
Current Value
If configurable,
list methods
No
Yes
No
Yes
No
Yes
No
Page 25
17/09/14
1.9
1.9.1
1.9.2
1.9.3
Capabilities
Yes
Yes
Yes
Current Value
If configurable,
list methods
No
No
No
1.9.4
1.9.5
Yes
No
Yes
No
1.9.6
Yes
No
Page 26
17/09/14
Capabilities
Yes
Current Value
If configurable,
list methods
No
Yes
No
Yes
No
Page 27
17/09/14
Capabilities
Yes
Current Value
If configurable,
list methods
No
Time logs
Event logs
Yes
No
Page 28
17/09/14
Capabilities
Current Value
Yes
If configurable,
list methods
No
Filling threshold:
Fixed at 100%
Configurable, range ______ % to ______%
Configurable, selectable from ___%, ___%, ___%
Configurable, other, describe
__________________
No longer filling threshold:
Fixed at 100%
Configurable, range______% to ______%
Configurable, selectable from ___%, ___%, ___%
Configurable, other, describe
__________________
Fixed at 0
Configurable, range _______to ______
minutes
Configurable, selectable from _____, _____,
_____
Configurable, other: 1 to 60 minutes in 1 minute
steps for fast scan-rate of 60 seconds, otherwise
Page 29
17/09/14
Capabilities
Current Value
Fixed at 0
If configurable,
list methods
-
Page 30
17/09/14
Capabilities
Yes
Current Value
If configurable,
list methods
No
Yes
No
Yes
No
Yes
No
Page 31
17/09/14
1.13 CONFIGURATION
1.13.1 Supports configuration download:
Capabilities
Current Value
Yes
If configurable,
list methods
No
Yes
No
Yes
File name
No
4096
Yes
No
Cold Restart
Warm Restart
Page 32
17/09/14
Capabilities
Yes
Yes
Current Value
If configurable,
list methods
No
No
Page 33
17/09/14