Documente Academic
Documente Profesional
Documente Cultură
Applications
1 of 13
2014
Document History
Issue
Date
Changes / Comments
1.0
21-12-2013
Initial release
1.1
08-04-2014
Order Information
Part No
QK-W011
Description
QK-W011UK
WiFi Remote controller (only three relays output, no RF 433MHz module and RF
plug sockets)
WiFi Remote controller with three RF 433MHz UK type main sockets
QK-W011EU
WiFi Remote controller with three RF 433MHz Europe type main sockets
QK-W011US
WiFi Remote controller with three RF 433MHz USA type main sockets
http://www.quark-elec.com
V1.1
2 of 13
2014
Contents
1
INTRODUCTION ................................................................................................................... 3
SETUP ................................................................................................................................... 4
2.1
2.2
2.3
3
POWER UP .......................................................................................................................... 4
ACCESS QK-W011.............................................................................................................. 4
RESET................................................................................................................................. 5
APP(ANDROID VERSION) ................................................................................................... 5
3.1
3.2
3.3
HARDWARE........................................................................................................................ 10
5.1
5.2
5.3
6
CONNECTIONS ................................................................................................................... 10
RF MAIN SOCKETS ............................................................................................................. 10
ENCLOSURE ...................................................................................................................... 11
OPERATING SPECIFICATIONS ........................................................................................ 12
1 INTRODUCTION
QK-W011 series remote controller is a versatile device which can be attached to many of
electronic devices in homes, offices, plants, or wherever you need. Operators can control any
remote equipments, heater, lights, machines, or power sockets through WiFi network. QK-W011
support three relay outs and 433MHz RF transmitter. RF power sockets within 25 meters of QKW011 can be controlled by mobile operators.
http://www.quark-elec.com
V1.1
3 of 13
2014
2 SETUP
2.1
Power up
QK-G021/022 module can be powered by 12VDC. Connect a 12 volt DC power supply to
the power socket, switch on the power supply. The indicator LED will turn on once system
finish initialization. This LED indicator flashes quickly if any wireless data transmit.
2.2
Access QK-W011
After 30 seconds of powering on, customer should be able to search an AP called
WiFi168. Access WLAN of your phone and connect with the WiFi168. The default
password is 88888888.
Figure 2 Search AP
http://www.quark-elec.com
V1.1
4 of 13
2014
Figure 3 Search AP
2.3
Reset
3 APP(ANDROID VERSION)
The latest version of Android APP can be downloading with the following link:
http://www.quark-elec.com/down/class/?3.html
3.1
Once open the APP, enter 192.168.1.100 in the IP bar and 5000 in the port bar (for some old
QK-W011, this should be 1). Then click Connect, then WiFi icon should change to blue, this
indicated the connection has been successful setup.
http://www.quark-elec.com
V1.1
5 of 13
2014
http://www.quark-elec.com
V1.1
6 of 13
2014
3.2
Reset password
Operators can change the WiFi password once connected with QK-W011 module. The
password should be 7 to 17 characters long. New password will not be active until re-power
QK-W011(Unplug the power header and connect again).
http://www.quark-elec.com
V1.1
7 of 13
2014
3.3
Operators can rename the three relay outputs and three RF main sockets as meaningful names
through settings on App.
http://www.quark-elec.com
V1.1
8 of 13
2014
Once the power socket received the paring command, The LED light on the socket will
flash briefly more quickly and then flash at 1 second intervals. This RF main socket
should have been successfully paired now.
Repeat above process for each different RF main sockets.
Simply plug-in the appliance which you want to operate remotely into the socket, press the
corresponding ON button on App that is paired to the socket. The appliance will turn on.
http://www.quark-elec.com
V1.1
9 of 13
2014
5 HARDWARE
5.1
Connections
General view of the module is show as below and details of each connection are described on it.
QK-W011 use 12VDC 1.0Amp power. The outside and inner diameter of the plug is 5.5mm and
2.1mm.
COM2
COM1
NC2
NO3
COM3
COM1
NC3
NO1
COM1
COM1
COM1
NC1
NO2
Reset
12V
RF aerial
5.2
RF main sockets
Customer can select USA, European or UK type RF main sockets. Like most of the similar RF
main sockets in the market, customer should keep at least 0.2 meter distance between one RF
main socket and the other. This is due to EMC interference between these RF main sockets.
http://www.quark-elec.com
V1.1
10 of 13
2014
5.3
and
2 meters
100.0%
5 meters
100.0%
8 meters
98.1%
10 meters
96.9%
15 meters
95.2%
20 meters
92.2%
Enclosure
IP56 Insulation Class 2 plastic enclosure, 115mm*90*40 external dimension is used for QKW011.
http://www.quark-elec.com
V1.1
11 of 13
2014
6 OPERATING SPECIFICATIONS
Item
Specification
Operating Temperature
-25C to +80C
Storage Temperature
-40C to +85C
DC Supply
12.0V(+/-10%)
160mA
190mA
WLAN Standard
Operating Frequency
Receive Sensitivity
+17 dBm for 802.11b, +13 dBm for 802.11g, +12 dBm for
802.11n
WiFi Antenna
http://www.quark-elec.com
V1.1
12 of 13
2014
1W
ASK (AM)
RF Transmission Power
<10mW
RF Emission Distance
7A240VAC
90V-245V
http://www.quark-elec.com
V1.1
13 of 13
2014