Sunteți pe pagina 1din 2

Intelligent Addressable BMS and Networking Interfaces

Single Mode Lon to Fibre Optic Adaptor

CFSFL01 - Single Mode Lon to Fibre Optic Adaptor

Overview

Benefits

The single mode Lon to fiber optic adapter


(CFSFL01) allows connection the of Cooper
system network (LonWorks) devices through
optical fiber, and to allow both point to point or
multi drop topology.

Simple to install
Easy to use
Extends Cooper panel
network
Fast response

Using only single mode fiber optic, the


(CFSFL01) adapter allows extension of the
Cooper system network LonWorks to a
maximum distance of 15km with a transmission
speed of up to 78Kbit/s or 1.25Mbit/s.
Connection is made using SC type fibre optic
connectors. In comparison with conventional
twisted pair cable, the fibre optic usage in a
LonWorks network has many advantages; it is
reliable and fast in long distance network
transmission even in difficult industrial
environments (with transients, surges or
electromagnetic interference etc.) without
requiring any additional transient protection.

Single Mode Lon to Fibre Optic Adaptor - CFSFL01

Dimensions
4mm

Technical Specification
36mm

5mm
12mm

Code

CFSFL01

Description

Single Mode Lon to Fibre Optic Adaptor

Specification

90mm

115.5mm
10mm

100mm

52mm

Operating Voltage

100mm
20mm
135mm

24V dc

Communication Protocol

LonWorks

LonWorks Connectors

Screw terminal block

LonWorks Rate

78 Kbps / 1.25 Mbps

Bit Error Rate

10e-9

Wavelength

1310nm

Fiber Type

Single mode fiber

Fibre Diameter

9/125 micron

Fibre Connector

SC type (optional ST type)

Link Distance

15km

Environmental
Operating Temperature

-30C to +70C

Humidity (Non Condensing)

20 to 90% RH

Physical
Dimensions (H x W x D)

Typical System Architecture

CFSFL01

Single-Mode
Fiber

Lon-Fiber
ADAPTOR
CFSFL01

LonWorks
NODE
Control Panel
&
Network Card

Fiber Optic Star Topology Link


LonWorks
NODE

Single-Mode Fiber

Single-Mode Fiber
CFSFL02

Terminals

SC type
connectors
TXD RXD POW

Lon-Fiber
ADAPTOR
LonWorks

Single-Mode Fiber
LonWorks

Single-Mode Fiber
LonWorks

CFSFL02

Lon-Fiber
ADAPTOR

1. Ensure that the power supply is switched off


during installation.
2. Take care when inserting the fibre optic
connector to avoid damage. Note that the
"RX" connector in the local modules port
should connect to the "TX" connector in the
far end modules port and vice versa.
3. LonA connects to Net_A of the LonWorks
Bus (network card), LonB connects Net_B.

Mechanical Layout and Connections

LonWorks

Lon-Fiber
ADAPTOR

Installation

CFSFL02

LonWorks
NODE

LonWorks
NODE

LonWorks
NODE

Control Panel
&
Network Card

Control Panel
&
Network Card

Control Panel
&
Network Card

Fiber
OUT

TX

Fiber
IN

RX

TX
RX
GND
LonA
LonB

DC24V

Control Panel
&
Network Card

Lon-Fiber
ADAPTOR

LonWorks

LonWorks
NODE

LonWorks

Fiber Optic Point to Point Link

36mm x 116 mm x 135mm

+
-

LonWorks Fiber Optical Adaptor


GND
LONA
LONB

10
9
8
7
6
5
4
3
2
1

+
Unused
Unused
Unused
Unused
Unused
GND
LONA
LONB

Network Screen Connecttion


Net_A of Network Card
Net_B of Network Card

Fiber Transmitting
Fiber Receiving
Network Screen
Net_A
Net_B

LED Indication
POW
TXD
RXD

Power On Indication
Fibre Port Transmitting Data
Fibre Port Receiving Data

on
Flashing
Flashing

Power On
Working
Working

Product Codes
Code
CFSFL01

Description
Single Mode Lon to Fibre Optic Adaptor

Descriptions represent only particulars of the goods to which they apply and do not form part of any contract. The company reserves the right to change specification without prior notification or public announcement.

Cooper Lighting and Safety Ltd, Wheatley Hall Road, Doncaster, South Yorkshire, DN2 4NB. UK.
T: +44 (0) 1302 303350 l F: +44 (0) 1302 303332 l E: techsupport@cooperfire.com l W: www.cooperfire.com

S-ar putea să vă placă și