Documente Academic
Documente Profesional
Documente Cultură
On this page, we are going to discuss how a Host might be zoned through switches to a
Clariion. This host has two(2) Host Bus Adapters. From the previous page, we know that the
host must have at least one connection to SP A and one connection to SP B. What we are
illustrating here is from the Host to Clariion Configuration page, Configuration Three. We
are also going to look at what is meant by Single Inititiator Zoning. Single Initiator Zoning
means that you create a zone with one HBA entry. We dont want to have a zone that would
contain an HBAs from two(2) Hosts.
HBA1 is connected to Port 0 on the switch. SP A port 0 is connected to the same switch at
Port 14. Based on the World Wide Names of HBA1 and SP A port 0, we can now create a
zone through the switch software. The zone could look as follows:
Zone HBA1 to SP A port 0
10:00:00:00:07:36:55:86
50:06:01:60:10:60:08:74
We also want to connect HBA1 to SP B. We connect SP B port 0 to Port 15 on the same
switch. That zone could look as follows:
source: http://clariionblogs.blogspot.com/2007/11/zoning.html