Documente Academic
Documente Profesional
Documente Cultură
Network Parameters
1 (7)
Date: 2013-11-19
Sheet: Heading
USER DESCRIPTION_x000D_Radio
Network Parameters
2 (7)
1. Introduction
1.1 Purpose
This document describes the WCDMA RAN Radio Network parameters.
1.2 Scope
This document lists and gives information about the WCDMA RAN Radio Network Parameters. It contains a general description of
the parameter, unit, value, range, default value, recommended value, syntax description and reference to BulkCM.
1.3 Structure
To assure that the correct information is delivered to the end-user of this document some of the sheets have been
been locked.
The following information is presented for each parameter:
MOC Name:
Parameter name:
Node:
Description:
Data Type
MOM Range:
Recommended Range:
Valid values:
Default value:
Recommended value
Date: 2013-11-19
Sheet: Introduction
USER DESCRIPTION_x000D_Radio
Network Parameters
3 (7)
Source for initial configuration of parameters of access type Read/Write and Restricted. The source can
be:
- RND: The parameter shall be configured according to Radio Network Design. This includes also cell
relation definitions between neighboring cells.
- CPI: Guidance how to configure the parameter can be found in a User Description, see the column "CPI
Reference"
- Recommended/Default: If there is no value in the recommended column, the default value is the
recommended configuration. Configuring the system according to Recommended/Default values will
ensure a robust initial reference configuration. Further tuning and optimization is necessary in order to
adapt to characteristics of a specific network.
- RBS Installation: The value is determined by the specific hardware configuration at the site. A typical
example is attenuation in feeder cable which is measured at the installation.
CPI Reference:
Access:
Mandatory:
Indicates whether or not this parameter is mandatory to configure at creation of the corresponding
managed object. For mandatory parameters no default value is defined.
Indicates whether or not the value of this parameter is stored persistently in the database of a node.
Persistent data will survive a node restart.
Indicates whether or not the Management system will be informed when the parameter value is changed
by the system or by a Management set operation.
The OSS-RC network manager automatically receives every notification but the RNC and RBS element
managers first have to subscribe to a notification.
Persistent
Notification
Sequence
USER DESCRIPTION_x000D_Radio
RN Optimization:
Network Parameters
4 (7)
Gives a classification (basic, intermediate or advanced) based on the importance each parameter has
during optimization activities. At this stage, it is assumed that there is no need for running consistency
checks. N/A will be found for non-optimizable parameters.
Date: 2013-11-19
Sheet: Introduction
USER DESCRIPTION_x000D_Radio
Network Parameters
5 (7)
Node
RBS DUW
Parameter Description
Data Type
The maximum number of resources that may be reserved for A-DCH in the long
baseband pool.
MOM Range
0..512
Unit: 1 CE
Takes effect: Takes effect immediately if possible. Otherwise it will take
effect gracefully (starving out resources).
Date: 2013-11-19
Sheet: 14.0
USER DESCRIPTION_x000D_Radio
Recommended Range
Valid Values
Default Value
Recommended Value
128
Network Parameters
Date: 2013-11-19
Sheet: 14.0
6 (7)
Mandatory
N
Persistent
Y
Notification
Y
USER DESCRIPTION_x000D_Radio
Sequence
N
Feature Name
HSDPA users per cell [capacity]
Network Parameters
Feature Number
FAJ 121 1011 R2
Date: 2013-11-19
Sheet: 14.0
7 (7)
Initial Tuning
N
RN Optimization
N/A