Documente Academic
Documente Profesional
Documente Cultură
INSTRUCTIONS
PARTS LIST
Left front body side molding
Accessory
Application
Publications No.
2015 CR-V
VERSION 1
Issue Date
SEP 2014
RIGHT FRONT
BODY SIDE
MOLDING
RIGHT REAR
BODY SIDE
MOLDING
Front template
LEFT REAR
BODY SIDE
MOLDING
LEFT FRONT
BODY SIDE
MOLDING
Q0D2408AG
Rear template
Alcohol swabs
08P05-T0A-1000-90
1 of 5
INSTALLATION
2.
FRONT
TEMPLATE
NOTE:
If you are also installing the accessory door edge
guards, install them before you install the body side
moldings.
Be careful not to damage the vehicle body paint finish.
This kit should only be installed if the ambient air
temperature is 15C (60F) or above.
To allow the adhesive to cure, do not wash the vehicle
for 24 hours. Please advise the customer.
FRONT
LEFT FRONT TEMPLATE
DOOR
3 TABS
Fold.
3 TABS
CHARACTER
LINE
Align.
MASKING
TAPE
LEFT FRONT
DOOR
3.
LEFT FRONT
DOOR
2 of 5
ALCOHOL
SWAB
FRONT
TEMPLATE
FRONT
Q0D2314AG
FRONT
Q0D2316BG
4.
ADHESIVE BACKING
Peel back 40 to 50 mm
(1 to 2 in.), and tape it to
front surface of the left
front body side molding.
ADHESIVE
BACKING
Remove.
ADHESIVE
BACKING
Remove.
FELT-TIP
PEN
FRONT
TEMPLATE
5 mm
(0.2 in.)
MARK
MASKING
TAPE
MARK
Align.
FRONT
TEMPLATE
LEFT FRONT
BODY SIDE
MOLDING
Q0D2318AG
LEFT FRONT
DOOR
FRONT
TEMPLATE
7.
LEFT FRONT
BODY SIDE
MOLDING
FRONT
QA20901AE
Align the left front body side molding with the front
template and the mark you made on the front
template, and attach it to the left front door as shown.
FRONT
TEMPLATE
Align.
LEFT FRONT
BODY SIDE
MOLDING
LEFT FRONT
DOOR
LEFT FRONT
BODY SIDE
MOLDING
FRONT
Q0D2401BG
3 of 5
8.
ADHESIVE
BACKING
Remove.
FRONT
LEFT FRONT
BODY SIDE
MOLDING
FRONT
Q0D2404BG
9.
ALCOHOL
SWAB
LEFT REAR
DOOR
Q0D2317BG
13. Fold three tabs on the rear template, and insert them
between the left doors.
REAR
3 TABS TEMPLATE
Fold.
LEFT REAR
DOOR
3 TABS
REAR
TEMPLATE
LEFT FRONT
BODY SIDE
MOLDING
CHARACTER
LINE
Align.
FRONT
RUBBER
ROLLER
Q0D2405BG
MASKING
TAPE
FRONT
REAR
TEMPLATE
LEFT REAR
DOOR
Q0D2315BG
14. Align the rear template with the character line, and
attach it to the left rear door using strips of masking
tape.
4 of 5
17. Press the left rear body side molding firmly with the
palm of your hand and remove the adhesive backing
50 to 100 mm (2 to 4 in.) at a time.
ADHESIVE
BACKING
Remove.
ADHESIVE
BACKING
Remove.
MASKING
TAPE
LEFT REAR
BODY SIDE
MOLDING
ADHESIVE BACKING
Peel back 40 to 50 mm
(1 to 2 in.), and tape it
to front surface of the
left rear body side
molding.
FRONT
ADHESIVE BACKING
Press the left rear body
side molding firmly with
the palm of your hand
while removing the
adhesive backing.
Q0D2402AG
16. Align the edges of the left rear body side molding
with the edges of the rear template, and install the
left rear body side molding on the left rear door.
LEFT FRONT BODY
SIDE MOLDING
LEFT REAR
BODY SIDE
MOLDING
Q0D2406AG
LEFT REAR
BODY SIDE
MOLDING
Align.
Align.
REAR
TEMPLATE
Align.
FRONT
RUBBER
ROLLER
FRONT
Align.
LEFT REAR
DOOR
LEFT REAR
BODY SIDE
MOLDING
Q0D2403BG
Q0D2407AG
20. Turn the front and rear templates over, and repeat
steps 1 through 19 to install the body side moldings
on the right side of the vehicle.
5 of 5