Documente Academic
Documente Profesional
Documente Cultură
Contractor shall verify and be responsible for all dimensions and conditions on the job. OB+Architecture Inc. must be notified immediately in writing of any variation from the dimensions and conditions shown on these drawings. Field verify all conditions prior to laying out or fabricating associated work. Bring to the architect's attention any deviation from designed conditions and field conditions prior to ordering
materials and installing work, and cooperate with architect to modify such conditions at no additional cost to the owner, architect or architect's consultants. Shop details must be submitted to the architect's office and reviewed by the architect prior to ordering materials, fabrication and delivery to the job site, unless otherwise provided for under the specific contractual agreement between the architect and client. OB+Architecture Inc. expressly reserves its common law copyright and other
property rights in these documents. These documents are not to be reproduced, changed, or copied in any form or manner whatsoever, nor are they to be assigned to a third party without first obtaining the written permission and written consent of OB+Architecture Inc. In the event of unauthorized use of these documents by a third party, the third party shall hold OB+Architecture Inc. harmless and agrees to remunerate OB+Architecture Inc.
for such use in an amount equal to the original fee for the original documents, plus legal fees, court costs, collection fees and other costs.
sheet
date:
title:
lman:
drawn:
issued:
project
revised:
address:
number:
number:
reviewed:
sheet setup:
OB+ARCHITECTURE INC.
PE 41231
PLAZA
15 W CHURCH STREET, SUITE 201
MECHANICAL ENGINEER
REVISION / SUBMISSION
PROJECT INFORMATION
SHEET INFORMATION
CRYSTAL LAKE
w w w . o b a r c h i t e c t u r e . c o m
ORLANDO, FL 32801 PH: 407.650.3735 FX: 407. 650.3736
HVAC
NOTES
LEGENDS &
OB / RG
PS-A2.1
2950 CURRY FORD ROAD
2009 - 15
M0.1
Written dimensions on these drawings shall have precedence over scaled dimensions. Contractor shall verify and be responsible for all dimensions and conditions on the job. OB+Architecture Inc. must be notified immediately in writing of any variation from the dimensions and conditions shown on these drawings. Field verify all conditions prior to laying out or fabricating associated work. Bring to the architect's attention any deviation from designed conditions and field conditions prior to ordering
materials and installing work, and cooperate with architect to modify such conditions at no additional cost to the owner, architect or architect's consultants. Shop details must be submitted to the architect's office and reviewed by the architect prior to ordering materials, fabrication and delivery to the job site, unless otherwise provided for under the specific contractual agreement between the architect and client. OB+Architecture Inc. expressly reserves its common law copyright and other
property rights in these documents. These documents are not to be reproduced, changed, or copied in any form or manner whatsoever, nor are they to be assigned to a third party without first obtaining the written permission and written consent of OB+Architecture Inc. In the event of unauthorized use of these documents by a third party, the third party shall hold OB+Architecture Inc. harmless and agrees to remunerate OB+Architecture Inc.
for such use in an amount equal to the original fee for the original documents, plus legal fees, court costs, collection fees and other costs.
NORTH
sheet
1 SCALE: 1/4" = 1'-0"
HVAC DEMOLITION PLAN
date:
title:
lman:
drawn:
issued:
project
revised:
address:
number:
number:
reviewed:
sheet setup:
OB+ARCHITECTURE INC.
PE 41231
PLAZA
15 W CHURCH STREET, SUITE 201
MECHANICAL ENGINEER
REVISION / SUBMISSION
PROJECT INFORMATION
SHEET INFORMATION
CRYSTAL LAKE
w w w . o b a r c h i t e c t u r e . c o m
ORLANDO, FL 32801 PH: 407.650.3735 FX: 407. 650.3736
HVAC
OB / RG
DEMOLITION
PLAN
JLP
THEOS-HVAC-MD.1
PS-MD.1
2950 CURRY FORD ROAD
2009 - 15
MD.1
Written dimensions on these drawings shall have precedence over scaled dimensions. Contractor shall verify and be responsible for all dimensions and conditions on the job. OB+Architecture Inc. must be notified immediately in writing of any variation from the dimensions and conditions shown on these drawings. Field verify all conditions prior to laying out or fabricating associated work. Bring to the architect's attention any deviation from designed conditions and field conditions prior to ordering
materials and installing work, and cooperate with architect to modify such conditions at no additional cost to the owner, architect or architect's consultants. Shop details must be submitted to the architect's office and reviewed by the architect prior to ordering materials, fabrication and delivery to the job site, unless otherwise provided for under the specific contractual agreement between the architect and client. OB+Architecture Inc. expressly reserves its common law copyright and other
property rights in these documents. These documents are not to be reproduced, changed, or copied in any form or manner whatsoever, nor are they to be assigned to a third party without first obtaining the written permission and written consent of OB+Architecture Inc. In the event of unauthorized use of these documents by a third party, the third party shall hold OB+Architecture Inc. harmless and agrees to remunerate OB+Architecture Inc.
for such use in an amount equal to the original fee for the original documents, plus legal fees, court costs, collection fees and other costs.
NORTH
NORTH
sheet
2
1 SCALE: 1/4" = 1'-0"
SCALE: 1/4" = 1'-0"
HVAC PIPING PLAN
HVAC DUCT RENOVATION PLAN
date:
title:
lman:
drawn:
issued:
project
revised:
address:
number:
number:
reviewed:
sheet setup:
OB+ARCHITECTURE INC.
PE 41231
PLAZA
15 W CHURCH STREET, SUITE 201
MECHANICAL ENGINEER
REVISION / SUBMISSION
PROJECT INFORMATION
SHEET INFORMATION
CRYSTAL LAKE
w w w . o b a r c h i t e c t u r e . c o m
ORLANDO, FL 32801 PH: 407.650.3735 FX: 407. 650.3736
PLANS
OB / RG
DUCT RENOVATION
JLP
2009 - 15
M2.1
Written dimensions on these drawings shall have precedence over scaled dimensions. Contractor shall verify and be responsible for all dimensions and conditions on the job. OB+Architecture Inc. must be notified immediately in writing of any variation from the dimensions and conditions shown on these drawings. Field verify all conditions prior to laying out or fabricating associated work. Bring to the architect's attention any deviation from designed conditions and field conditions prior to ordering
materials and installing work, and cooperate with architect to modify such conditions at no additional cost to the owner, architect or architect's consultants. Shop details must be submitted to the architect's office and reviewed by the architect prior to ordering materials, fabrication and delivery to the job site, unless otherwise provided for under the specific contractual agreement between the architect and client. OB+Architecture Inc. expressly reserves its common law copyright and other
property rights in these documents. These documents are not to be reproduced, changed, or copied in any form or manner whatsoever, nor are they to be assigned to a third party without first obtaining the written permission and written consent of OB+Architecture Inc. In the event of unauthorized use of these documents by a third party, the third party shall hold OB+Architecture Inc. harmless and agrees to remunerate OB+Architecture Inc.
for such use in an amount equal to the original fee for the original documents, plus legal fees, court costs, collection fees and other costs.
sheet
date:
title:
lman:
drawn:
issued:
project
revised:
address:
number:
number:
reviewed:
sheet setup:
OB+ARCHITECTURE INC.
PE 41231
PLAZA
15 W CHURCH STREET, SUITE 201
MECHANICAL ENGINEER
REVISION / SUBMISSION
PROJECT INFORMATION
SHEET INFORMATION
CRYSTAL LAKE
w w w . o b a r c h i t e c t u r e . c o m
ORLANDO, FL 32801 PH: 407.650.3735 FX: 407. 650.3736
HVAC
SCHEDULES
DETAILS &
OB / RG
M2.2
PS-A2.1
2950 CURRY FORD ROAD
2009 - 15
Written dimensions on these drawings shall have precedence over scaled dimensions. Contractor shall verify and be responsible for all dimensions and conditions on the job. OB+Architecture Inc. must be notified immediately in writing of any variation from the dimensions and conditions shown on these drawings. Field verify all conditions prior to laying out or fabricating associated work. Bring to the architect's attention any deviation from designed conditions and field conditions prior to ordering
materials and installing work, and cooperate with architect to modify such conditions at no additional cost to the owner, architect or architect's consultants. Shop details must be submitted to the architect's office and reviewed by the architect prior to ordering materials, fabrication and delivery to the job site, unless otherwise provided for under the specific contractual agreement between the architect and client. OB+Architecture Inc. expressly reserves its common law copyright and other
property rights in these documents. These documents are not to be reproduced, changed, or copied in any form or manner whatsoever, nor are they to be assigned to a third party without first obtaining the written permission and written consent of OB+Architecture Inc. In the event of unauthorized use of these documents by a third party, the third party shall hold OB+Architecture Inc. harmless and agrees to remunerate OB+Architecture Inc.
for such use in an amount equal to the original fee for the original documents, plus legal fees, court costs, collection fees and other costs.
NORTH
1
EDGE OF CURB
P17
M M M
P15
P10
P17
P17
CAP
OF ASSEMBLY
CAP CW PIPING
THIS WEST SIDE
WHICH SUPPLIES
sheet
date:
title:
lman:
drawn:
issued:
project
revised:
address:
number:
number:
reviewed:
sheet setup:
OB+ARCHITECTURE INC.
PE 41231
PLAZA
15 W CHURCH STREET, SUITE 201
MECHANICAL ENGINEER
REVISION / SUBMISSION
PROJECT INFORMATION
SHEET INFORMATION
CRYSTAL LAKE
w w w . o b a r c h i t e c t u r e . c o m
ORLANDO, FL 32801 PH: 407.650.3735 FX: 407. 650.3736
PLUMBING
DEMOLITION
FLOOR PLAN
THEOS PL-DEMO
OB / RG
JLP
PS-A2.1
2950 CURRY FORD ROAD
2009 - 15
PD.1
Written dimensions on these drawings shall have precedence over scaled dimensions. Contractor shall verify and be responsible for all dimensions and conditions on the job. OB+Architecture Inc. must be notified immediately in writing of any variation from the dimensions and conditions shown on these drawings. Field verify all conditions prior to laying out or fabricating associated work. Bring to the architect's attention any deviation from designed conditions and field conditions prior to ordering
materials and installing work, and cooperate with architect to modify such conditions at no additional cost to the owner, architect or architect's consultants. Shop details must be submitted to the architect's office and reviewed by the architect prior to ordering materials, fabrication and delivery to the job site, unless otherwise provided for under the specific contractual agreement between the architect and client. OB+Architecture Inc. expressly reserves its common law copyright and other
property rights in these documents. These documents are not to be reproduced, changed, or copied in any form or manner whatsoever, nor are they to be assigned to a third party without first obtaining the written permission and written consent of OB+Architecture Inc. In the event of unauthorized use of these documents by a third party, the third party shall hold OB+Architecture Inc. harmless and agrees to remunerate OB+Architecture Inc.
for such use in an amount equal to the original fee for the original documents, plus legal fees, court costs, collection fees and other costs.
SCALE: NONE
ELECTRIC HOT WATER DETAIL
NORTH
1
MS-1
1.5" CAP
P2 , 1.5"
P8 , 2" V
P6 , FS-1
EDGE OF CURB
EWH-1 ABOVE
G
G
P12
P1 , 1.5"
P9
G
P6 , HD-1
4" COTG, 2-WAY
G
G
G
G
G
G
FD-2
FD-2
P9
GR GR GR GR GR
INT-1
G
4" FCO-1
R
INTERCEPTOR
GR
P5 , 4"
COUNTER
P11 , 4"
HD-1 , P6
P6 , FS-1
2" AAV
SA
N
4" WCO-1
W/ 2" AAV
P15
2" AAV
4"
SA
N
P10
P7
FD-1
P16
M M M
P14
WC-1
3
1
FD-1
WC-1
2"
4"
SIZES
1"
1"
2"
HB-1
11 4"
P15
(1.25")
RPZ-1
SA
N
SEE RISERS FOR
ADDITIONAL PIPE
P13
L-1
, 4"
2" AAV
2" AAV
2" AAV
4" WCO
L-1 WITH
4" COTG, 2-WAY
3/4" CW DOWN
sheet
date:
title:
lman:
drawn:
issued:
project
revised:
address:
number:
number:
reviewed:
sheet setup:
OB+ARCHITECTURE INC.
PE 41231
PLAZA
15 W CHURCH STREET, SUITE 201
MECHANICAL ENGINEER
REVISION / SUBMISSION
PROJECT INFORMATION
SHEET INFORMATION
CRYSTAL LAKE
w w w . o b a r c h i t e c t u r e . c o m
ORLANDO, FL 32801 PH: 407.650.3735 FX: 407. 650.3736
FLOOR PLAN
PLUMBING
OB / RG
THEOS PLUMBING
JLP
PS-A2.1
2950 CURRY FORD ROAD
2009 - 15
P2.1
PLUMBING SCHEDULE :
Written dimensions on these drawings shall have precedence over scaled dimensions. Contractor shall verify and be responsible for all dimensions and conditions on the job. OB+Architecture Inc. must be notified immediately in writing of any variation from the dimensions and conditions shown on these drawings. Field verify all conditions prior to laying out or fabricating associated work. Bring to the architect's attention any deviation from designed conditions and field conditions prior to ordering
materials and installing work, and cooperate with architect to modify such conditions at no additional cost to the owner, architect or architect's consultants. Shop details must be submitted to the architect's office and reviewed by the architect prior to ordering materials, fabrication and delivery to the job site, unless otherwise provided for under the specific contractual agreement between the architect and client. OB+Architecture Inc. expressly reserves its common law copyright and other
FD-1: 3" OUTLET FLOOR DRAIN WITH TRAP PRIMER CONNECTION, 6" SQUARE STRAINER, AND CAST IRON BODY. ZURN Z4153PNL
OR EQUAL. 3" TRAP.
FD-2: 4" OUTLET FLOOR DRAIN WITH NO TRAP PRIMER CONNECTION, 6" SQUARE STRAINER, AND CAST IRON BODY. ZURN Z4154NL
OR EQUAL. 4" TRAP.
HD-1: 2" X 4" OUTLET HUB DRAIN 1" AFF WITH 2" TRAP.
FS-1: 4" OUTLET FLOOR SINK WITH 12" X 12" X 8" HIGH SUMP, 1/2 GRATE, REMOVABLE SEDIMENT BASKET, AND ACID RESISTANT
CAST IRON BODY. ZURN Z1901 OR EQUAL. 4" TRAP.
L-1: WHITE HANDICAPPED ACCESSIBLE WALL HUNG VITREOUS CHINA LAVATORY. AMERICAN STANDARD 0355.012 OR EQUAL.
PROVIDE AMERICAN STANDARD 2385.404 CP SINGLE LEV. FAUCET, OFFSET GRID DRAIN, P TRAP, STOPS, SUPPLIES, ADA TRAP WRAP OB+ARCHITECTURE INC.
15 W CHURCH STREET, SUITE 201
WHITE INSULATION KIT, AND WALL CARRIER. 0.5" CW. 0.5" HW. 1.5" TRAP. ORLANDO, FL 32801 PH: 407.650.3735 FX: 407. 650.3736
property rights in these documents. These documents are not to be reproduced, changed, or copied in any form or manner whatsoever, nor are they to be assigned to a third party without first obtaining the written permission and written consent of OB+Architecture Inc. In the event of unauthorized use of these documents by a third party, the third party shall hold OB+Architecture Inc. harmless and agrees to remunerate OB+Architecture Inc.
P8 w w w . o b a r c h i t e c t u r e . c o m
WC-1: HANDICAPPED ACCESSIBLE WHITE FLOOR MOUNTED ELONGATED TANK TYPE PRESSURE ASSIST WATER CLOSET. AMERICAN
STANDARD CADET-PA RIGHT HEIGHT OR EQUAL. (1.6 GALLONS PER FLUSH). PROVIDE STOP AND SUPPLY. PROVIDE WHITE OPEN
FRONT SEAT EQUAL TO OLSONITE 10CC. 0.5" CW. INTEGRAL TRAP. 6 4"
MS-1: THERMOPLASTIC 24" X 24" X 10" HIGH MOP SINK EQUAL TO FIAT MSB2424. PROVIDE WITH SPEAKMAN SC-5811-RCP SERVICE
FAUCET AND WALL BRACE, AND VACUUM BREAKER. 0.5" CW. 0.5" HW. 3" TRAP.
WCO-1: WALL CLEANOUT ACCESS COVER AND PLUG. BRONZE CONSTRUCTION EQUAL TO ZURN Z1468 OR EQUAL.
COTG: CLEANOUT TO GRADE. ZURN Z14004"NL OR EQUAL WITH CAST IRON COVER AND SET IN MIN. 12" X 12" CONCRETE FOOTPRINT.
HB-1: HOSE BIBB WITH VACUUM BREAKER IN CHROME KEY OPERATED LOCKABLE WALL BOX. WOODFORD MODEL B24 OR EQUAL.
0.5" CW.
4" REVISION / SUBMISSION
P1
EWH-1: 40 GALLON ELECTRIC WATER HEATER WITH INTEGRAL HEAT TRAPS. 208 VAC, SINGLE PHASE (VERIFY VOLTAGE PRIOR TO P2
PURCHASE), DUAL 8 KW NON SIMULTANEOUS ELEMENTS. RUUD PE-40 OR EQUAL. PROVIDE APPROVED PAN, T/P RELIEF VALVE, 32 issued:
WATTS EXPANSION TANK, AND TANK DRAIN VALVE. 0.75" CW. 0.75" HW. INSTALL ON WALL PLATFORM ABOVE MOP SINK AND IN
ACCESSIBLE MANNER ACCEPTABLE TO AHJ. OPERATING WEIGHT OF WATER HEATER IS MAX. 450#. SEE ARCHITECTURAL AND revised:
STRUCTURAL PLANS FOR WALL PLATFORM DESIGN.
P16
RPZ-1: RPZ BACKFLOW PREVENTER WITH INTEGRAL QUARTER TURN BALL VALVES FOR ISOLATION BOTH SIDES. WATTS 909QT OR
WILKINS 975XL. PROVIDE WITH AIR GAP FITTING AND ROUTE FULL SIZE DRAIN PIPE TO adjacent DRYWELL. SIZE IS NOTED ON THE
PLANS. 4
INT-1: 750 GALLON PRECAST CONCRETE GREASE INTERCEPTOR WITH HIGHWAY H-30 RATED COVER AND WITH RISER RINGS AS
REQUIRED TO BRIDGE ELEVATION BETWEEN FINISHED PAVEMENT AND INTERCEPTOR. OLDECASTLE PRECAST INC. OR EQUAL. SEE 4
DETAIL ON PLANS. FD-2
33
PLUMBING KEY NOTES : 4" 1
P1: NEW 1.5" NATURAL GAS SERVICE WITH METER, REGULATOR, VALVES, ETC. BY GAS COMPANY. PIPING SIZED PER 2007 FGC
TABLE 402.4(1) WITH LESS THAN 2 PSI INLET PRESSURE, 0.3" WC PRESSURE DROP, AND WITH SPECIFIC GRAVITY OF 0.6. TABLE
ALLOWS 600 MBH (600 CFH) WITH 70 TOTAL EQUIVALENT FEET. INSTALLED CAPACITY IS 465 MBH (465 CFH) WITH 60 TOTAL PROJECT INFORMATION
EQUIVALENT FEET. NATURAL GAS UTILITY COMPANY SHALL CONNECT TO THEIR EXISTING NATURAL GAS PIPING AT WEST SIDE OF
SHOPPING CENTER (WEST OF ADJACENT TENANT) AND ALL ASSOCIATED SITE WORK SHALL BE BY NATURAL GAS UTILITY.
P2: NEW UNION, BALL VALVE AND 2 POSITION ELECTRIC SOLENOID NATURAL GAS VALVE AND INTERLOCK WITH HOOD FIRE
SUPPRESSION SYSTEM AND CONTROL PANEL.
P8: EXISTING 3" VENT IN WALL AND VTR. VERIFY EXACT LOCATION IN FIELD.
P9: SUPPORT NEW PIPING BELOW COUNTER MILLWORK AND ABOVE SLAB IN A MANNER PROTECTED FROM OBSTRUCTIONS AND CRYSTAL LAKE
EXPOSURE.
PLAZA
P10: DEMOLISH AND REMOVE EXISTING CW PIPING. REPLACE EXISTING DOMESTIC WATER METER AND SERVICE WITH NEW METER
AND 1.25" SERVICE. CUT, TRENCH, BACKFILL, AND REPAVE TO MATCH ADJACENT CONSTRUCTION AND AS REQUIRED BY AHJ.
P11: CONNECT NEW SANITARY PIPING TO EXISTING. VERIFY EXACT LOCATION IN FIELD. CUT, TRENCH, BACKFILL, AND REPAVE TO
MATCH ADJACENT CONSTRUCTION AND AS REQUIRED BY AHJ.
P13: INSTALL NEW DOMESTIC WATER PIPING CONCEALED ABOVE CEILING (AND ABOVE TOP OF COOLER).
P14: PROVIDE AND INSTALL ACCESSIBLE BALL VALVE IN RISE. LABEL VALVE "WATER".
address: 2950 CURRY FORD ROAD
P15: EXISTING METERS ASSOCIATED WITH ADJACENT TENANTS. NO SCOPE OF WORK.
SUITE 2952
P16: INSTALL INSULATED 3/4" DRAIN PIPE FROM AUX. DRAIN BELOW CHICKEN BOX AND TERMINATE ABOVE FLOOR SINK. INSULATION
SHALL BE JACKETED WITH 25/50 USDA APPROVED ZESTON JACKETING.
6 ORLANDO, FLORIDA 32803
P7
11
GENERAL PLUMBING NOTES :
11 project
number: 2009 - 15
1. ALL WORK IS ASSOCIATED WITH A RENOVATION OF AN EXISTING TENANT SPACE WITHIN A STRIP SHOPPING CENTER. VERIFY 32
EXACT LOCATIONS OF ALL EQUIPMENT TO BE PLUMBED PRIOR TO THE COMMENCEMENT OF WORK. REFER TO ARCH. AND KITCHEN
EQUIPMENT PLANS FOR LOCATIONS OF ALL SAID EQUIPMENT. PIPING IS SHOWN DIAGRAMMATICALLY. ADDITIONAL OFFSETS AND
FITTINGS WILL BE REQUIRED. REROUTE TO AVOID SPACE CONFLICTS AS REQD. COORDINATE REQUIRED WORK WITH ALL TRADES.
33 ENGINEER SEAL / SIGNATURE
2. COMPLETE AND WORKING PLUMBING SYSTEMS SHALL BE IN ACCORDANCE WITH 2007 FLORIDA BUILDING/PLUMBING/FUEL CODES FLORIDA LICENSED ENGINEER
for such use in an amount equal to the original fee for the original documents, plus legal fees, court costs, collection fees and other costs.
3. PRESSURE AND HYDROSTATICALLY TEST THE PIPING, AS APPLICABLE, TO INSURE THE ABSENCE OF LEAKS IN ACCORDANCE P11 ,4" MECHANICAL ENGINEER
WITH THE 2007 FLORIDA BUILDING/PLUMBING/FUEL CODES. DISINFECT ALL DOMESTIC WATER PIPING IN ACCORDANCE WITH THE A. PETER TANKEL, P.E.
2007 FLORIDA BUILDING/PLUMBING CODE. SOAP AND PRESSURE TEST ALL NATURAL GAS PIPING IN ACCORDANCE WITH THE 2007
702 DENTON ROAD
FLORIDA BUILDING/FUEL CODES AND NFPA 54. SUPPORT ALL PIPING IN ACCORDANCE WITH THE 2007 FLORIDA
BUILDING/PLUMBING/FUEL CODES.
25 WINTER PARK, FL 32792
PH & FX: 407 657 5585
4. NEW WASTE, GREASE, DRAIN AND VENT PIPING SHALL BE PVC DWV. TRENCHES SHALL BE BACKFILLED AND COMPACTED. NEW
CW AND HW PIPING SHALL BE S-40 CPVC WITH SOLVENT WELDED FITTINGS. NEW NATURAL GAS PIPING SHALL BE S-40 ASTM A53
PE 41231
BLACK STEEL WITH THREADED FITTINGS AND LISTED VALVES. WRAP ALL NEW HOT WATER PIPING AND ALL ICE MACHINE/ 25
FREEZER/ CONDENSATE/ COLD/ HOT DRAINAGE PIPING WITH 1" R-4 PER INCH (PER THE 2007 FLORIDA MODEL ENERGY CODE)
CELLULAR RUBBER INSULATION EQUAL TO ARMSTRONG ARMAFLEX. NOTE: NON CONDENSATE BRANCH PIPING LESS THAN 12' MAY
2"
HD-1 SHEET INFORMATION
BE INSULATED WITH 1/2" INSULATION PER SAME CODE. CONTRACTOR MAY SUBSTITUTE FIBERGLASS INSULATION WITH SAME
INSTALLED R VALUE FOR HW PIPING INSULATION. PROVIDE DIELECTRIC UNIONS AT ANY CONNECTIONS BETWEEN STEEL AND 2" title:
COPPER.
6. TENANT SHALL BE PROTECTED WITH AN APPROVED RPZ BACKFLOW PREVENTER AS SPECIFIED AND PER THE AHJ.
4" WCO PLUMBING
7. PROVIDE WATER HAMMER ARRESTORS IN ACCORDANCE WITH THE 2007 FLORIDA BUILDING/PLUMBING CODE AND THE PDI.
drawn:
RISERS
JLP
8. SECURE ALL GAS FIRED EQUIPMENT WITH CABLE RESTRAINTS IN ACCORDANCE WITH THE 2007 FLORIDA BUILDING/FUEL CODE.
reviewed:
9. ALL EQUIPMENT AND FIXTURES SHALL BE FURNISHED WITH ISOLATION VALVES/ STOPS.
OB / RG
date:
10. CONTRACTOR SHALL COORDINATE BAG IN BOX REQS. AND ALL CONDUITS WITH EQUIPMENT VENDOR IN THE FIELD AND PRIOR
TO CONSTRUCTION.
lman:
11. REFRIGERATION SCOPE OF WORK IS BY OTHERS. ALL REFRIGERATION EQUIPMENT, PIPING, SUPPORTS, CONTROLS, ETC. IS BY
PS-P3.1
OTHERS.
12. GREASE INTERCEPTOR CAPACITY: IN ACCORDANCE WITH THE 2007 FPC TABLE 1003.5.1: 44 SEATS X 10 GALLONS/ SEAT (PAPER R3 RISER #3: DOMESTIC WATER RISER R4 RISER #4: SANITARY WASTE & VENT RISER sheet setup:
sheet
THEOS PL
PRODUCTS WITH NO DISHWASHER) X 10/12 (12 HOURS) X .75 (LOADING FACTOR, OTHER HIGHWAY) = 275 GALLON GREASE SCALE: NOT TO SCALE SCALE: NOT TO SCALE number:
INTERCEPTOR REQD. A 750 GALLON GREASE INTERCEPTOR HAS BEEN SPECIFIED. SEE CIVIL/ SITE PLANS FOR ALL ASSOCIATED
WORK.
P3.1