Documente Academic
Documente Profesional
Documente Cultură
The oscillation frequency of this oscillator is fixed by the value of capacitor (C)
and resistor (Ra) and resistor (Rb).
Depending on the previous calculations, it was determined that the transmitter unit must
use Ra & Rb each = 10Kohm, and a capacitor of 1.2 nFarads, to give the 40KHz frequency
signals.
The main purpose of this signal is to generate a stable permanent 40KHz signals to feed the
transmitter of the whole project in stable way.
By controlling the values of resistors and capacitors, we can determine the frewuency of the
output signal. We made sure that the output frequency is 40KHz because the ultrasonic is driven
correctly and ultimately on this frequency to give the widest scanning of unltrasonic waves.