Documente Academic
Documente Profesional
Documente Cultură
Airtel hacks
[COMPANY NAME] compiled by abhishek kumar
proxy 10.2.45.155
port 8080
first of all use UCWeb instead of teashark. ucweb is another gr8 option as teashark
webservers may get prob due to too many airtel users. u can get ucweb frm
http://www.ucweb.com/English/mobile_list.shtml
homepage: http://100.1.200.271:1021/mmsc
IP: 10.2.45.155
PORT: 8080
Access point: airtelfun.com
Airtel Friends!
Want to get free live cricket scores?
Send sms ckt to 8558
100% Working in Tamilnadu
Free Dwnld
Unlmtd Hollywood Image video theme etc
http://202.46.200.191/ar3/unholly/static.jsp
These were taken frm various sources. I havent checked them so dont blame me if
dosent works. Hope u like it.
a
Pls donot comment without veryfying. If u dont know hot to set proxy settings and
use web browser then sorry to say. It wont work.
For rajasthan atleast these settings are working everywhere i know, even in delhi it
works
proxy: 10.2.45.155
port: 8080
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
USERNAME : blank
PASSWORD : blank
IPADDRESS :100.1.200.99
DNSADDRESS 1 : 202.56.230.5
DNSADDRESS 2 : 202.56.240.5
IP ADDRESS : 100.1.200.99
PORT : 8080
USERNAME :
PASSWORD :
3) Connect your mobile to the PC (or Laptop) and install the driver for
your mobiles modem.
7) Pick up your mobile and try to access any site. You will get Access
Denied.(Except for Airtel Live!). IT DOES NOT MATTER.
Keep the mobile down.
12/29/07
Anonymous
After a few seconds the page will start to load and you have the
WHOLE internet at your disposal.
Quote: pls Note If u are getting any error wile dialing a dial up connection than go to
Control panel>> Phone and modem>>>select modem and click on its properties
>>advanced
cntd
and enter the following initialization commands
CODEAT+CGDCONT=1, IP,airtelfun.com,",0,0
and click on ok now connect to gprs it will be connected without any error
12/29/07
Anonymous
I doesnt matter whether u use Nokia 5300 or ne other cell phone!!
Ur fone just must be compatible to GPRS!!!!!!
Now No worriess!!
dis whole Process is given step by step!!!
12/29/07
Anonymous
SYMPTOMS:If you try to establish a Point-to-Point Protocol (PPP) dial-up connection, you may
receive the following error message:
Error 734: The PPP link control protocol was terminated.
As a result, you cannot establish a dial-up connection.
SE:This issue may occur if either of the following conditions are true: Multi-link
negotiation is turned on for the single-link connection.
-or The dial-up connection security configuration is incorrectly configured to use the
Require secured password setting.
RESOLUTION:To resolve this issue: 1. Click Start, point to Settings, and then click Network and
Dial-up Connections.
NOTE: For Windows Server 2003, click Start, point to Control Panel, and then point to
Network Connections.
2. Right-click the appropriate dial-up networking connection, and then click
Properties.
3. Click the Networking tab, and then click Settings.
4. Click to clear the Negotiate multi-link for single link connections check box (if it is
selected).
5. Click OK, and then click OK.
6. Double-click the connection, and then click Dial. If this procedure resolves the
issue and you can establish a dial-up connection, you do not have to follow the
remaining steps in this article.
If this does not resolve the issue and you cannot establish a dial-up connection, go
to step 7 to continue to troubleshoot this issue.