Sunteți pe pagina 1din 5

Earphones and

Accessories
Single Ear Bud
Part Number: LA-161

Use with any of Listens receivers.


Economical, low cost hearing option.
6LQJOHHDUIULFWLRQW
Replaceable ear cushions available
(Specify LA-163).
The receivers antenna is built into the
headphone cord.

6SHFLFDWLRQV
Impedance

32 Ohm +/- 15%

Maximum Input

30 mW

Connector

3.5 mm mono

Cable Length

36 in. (92 cm)

Weight

4 oz. (113 g)

Dual Ear Bud


Part Number: LA-162

Use with any of Listens receivers.


'XDOHDUIULFWLRQW
Replaceable ear cushions available
(specify LA-163).
Economical cost hearing option.
The receivers antenna is built into the
headphone cord.

6SHFLFDWLRQV
Impedance

32 Ohm +/- 15%

Maximum Input

30 mW maximum

Connector

3.5 mm mono

Cable Length

36 in. (92 cm)

Weight

4 oz. (113 g)

Ear Bud Replacement Cushions


Part Number: LA-163

Package of 20.
Fits LA-161 Single Ear Bud and LA-162
Dual Ear Buds.

Listen Technologies Corporation 14912 Heritagecrest Way Bluffdale Utah 84065-4818 U.S.A.
+1.801.233.8992 +1.800.330.0891 North America +1.801.233.8995 Fax
Listen Technologies Corporation All rights reserved 102407

Earphones and Accessories Page 1

Ear Speaker
Part Number: LA-164

6SHFLFDWLRQV

Use with any of Listens receivers.


Single ear clip that doesnt mess up hair.
Easily cleaned (solid plastic speaker).
Strong volume output.
The receivers antenna is built into the
headphone cord.

Impedance

32 Ohm +/- 15%

Maximum Input

100 mW

Connector

3.5 mm mono

Cable Length

36 in. (92 cm)

Weight

4 oz. (113 g)

Stereo Headphones
Part Number: LA-165

Dual ear over-the-head style.


Traditional headset design.
(DUFXVKLRQVIROGDWIRUFRQYHQLHQWVWRUDJH
Replaceable ear cushions available
(specify LA-167).
The earphone cord works as the receivers
antenna.

(DUSKRQH6SHFLFDWLRQV
Impedance

32 Ohm +/-15%

Maximum Input

100 mW

Connector

3.5 mm stereo

Cable Length

36 in. (92 cm)

Weight

5 oz. (142 g)

Neck Loop
Part Number: LA-166

Use with any of Listens receivers.


Use with any hearing aid equipped with
a T coil.
The receivers antenna is built in to the
headphone cord.

6SHFLFDWLRQV
Impedance

12 Ohm +/-15%

Maximum Input

2 W (75mW nominal)

Connector

3.5 mm mono

Cable Length

37 in. (94 cm)

Circumference

16 in. (41 cm) from


base of loop coil

Listen Technologies Corporation 14912 Heritagecrest Way Bluffdale Utah 84065-4818 U.S.A.
+1.801.233.8992 +1.800.330.0891 North America +1.801.233.8995 Fax
Listen Technologies Corporation All rights reserved 102407

Earphones and Accessories Page 2

Replacement Cushions for Stereo Headphones (10)


Part Number: LA-167

Package of 10.
Fits LA-165 Stereo Headset.

Sanitary Covers for Stereo Headphones (10)


Part Number: LA-168

Use with Listen Stereo Headsets (LA-165)


FDA approved sanitary cover for ear
cushions.
Package of 10

Behind-the-Head Stereo Headphones


Part Number: LA-170

Dual ear output.


Behind-the-Head design allows usage
with hard hats and doesnt mess up hair.
)ROGVDWIRUFRQYHQLHQWVWRUDJH
Replaceable ear cushions available
(specify LA-167)
The earphone cord works as the
receivers antenna.

6SHFLFDWLRQV
Impedance

32 Ohm +/- 15%

Maximum Input

100 mW

Connector

3.5 mm stereo

Cable Length

36 in. (92 cm)

Weight

5 oz. (142 g)

Listen Technologies Corporation 14912 Heritagecrest Way Bluffdale Utah 84065-4818 U.S.A.
+1.801.233.8992 +1.800.330.0891 North America +1.801.233.8995 Fax
Listen Technologies Corporation All rights reserved 102407

Earphones and Accessories Page 3

Over-the-Head Microphone and w/Earphone


Part Number: LA-272

6SHFLFDWLRQV

Use with Listens LT-700 Portable


Transmitter and Listen Receivers or other
audio input.
Two 3.5 mm connectors - one for the
microphone and the other for the
earphone.
Picks up voice and transmits to receivers.
Uni-directional mic picks up audio from
only one direction.
Superior aural performance.
Ideal for unobtrusive placement and
high performance.
Directional microphone picks up audio
directly in front of the mic.
Does not pick up unwanted audio and
noise in all directions
The transmitter and receiver antenna
is built in to this microphone/headphone
cord.

Impedance

Less than 2.2K ohm

Connector

3.5 mm mono

Phantom Power

3 VDC required

Cable Length

36 in. (92 cm)

Weight

8 oz. (227 g)

Portable Receiver Consumer Camcorder Cable


Part Number: LA-265

Use with any of Listens receivers.


Used to provide direct audio feed to a
consumer camcorder or other recording
device.

6SHFLFDWLRQV
Connectors

Male 3-pin XLR and


male 3.5 mm stereo

In-line Resister Pad

40 dB

Cable Length

4 ft. (121 cm)

Portable Receiver Professional Camcorder Cable


Part Number: LA-266

Use with any of Listens receivers.


Used to provide direct audio feed to a
professional camcorder or other
recording device.

6SHFLFDWLRQV
Connectors

Male 3-pin XLR and


male 3.5 mm stereo

In-line Resister Pad

40 dB

Cable Length

4 ft. (121 cm)

Listen Technologies Corporation 14912 Heritagecrest Way Bluffdale Utah 84065-4818 U.S.A.
+1.801.233.8992 +1.800.330.0891 North America +1.801.233.8995 Fax
Listen Technologies Corporation All rights reserved 102407

Earphones and Accessories Page 4

DIS Stereo Headphones


Part Number: DH-6021

Durable reinforced cable.


90 stereo connector.
Special designed for speech
intelligibility.
Replaceable ear pads.

6SHFLFDWLRQV

Audio

Interconnections

Physical

Frequency response

35 Hz - 15 kHz

Nominal Impedance

600 Ohm

Loudspeaker maximum
power

86 dB @ 1 kHz

Load Rating

100 mW

Distortion

<1.5%

Headphone connector

One (1) 90 male 3.5


mm (0.14 in.) stereo
connector

Cable Length

62.0 in. (1.6 m)

Color

Black

Unit Weight

1.94 oz. (55 g)

Shipping Weight

1.0 lbs. (0.45 kg)

DIS Stethoscope Stereo Headphones


Part Number: DH-6023
Super light weight.
90 stereo connector.
Stethoscope style for
minimum discomfort to the
delegate.
Replaceable ear pads.

6SHFLFDWLRQV
Audio

Interconnections

Physical

Frequency Response

100 Hz - 4 kHz

Nominal Impedance

32 Ohm

Max input level

20 mVA

Headphone connector

One 91) 90 male 3.5


mm (0.14) stereo
connector

Cable Length

62.0 in. (1.6 m)

Color

Black

Unit Weight

0.63 oz. (18 g)

Shipping Weight

1.0 lbs. (0.45 kg)

DIS Clip Headphones


Part Number: DH-6025
Lightweight.
Replaceable ear pad.
90 stereo connector.

6SHFLFDWLRQV
Audio

Interconnections

Physical

Freqency Response

100 Hz - 4kHz

Nominal Impedance

32 Ohm

Max input level

10mVA

Headphone connector

One (1) 90 male 3.5


mm (0.14 in.)
connector

Cable Length

62.0 in. (1.6 m)

Color

Black

Unit Weight

0.35 oz. (10 g)

Shipping Weight

1.0 lbs. (0.45 kg)

Listen Technologies Corporation 14912 Heritagecrest Way Bluffdale Utah 84065-4818 U.S.A.
+1.801.233.8992 +1.800.330.0891 North America +1.801.233.8995 Fax
Listen Technologies Corporation All rights reserved 102407

Earphones and Accessories Page 5

S-ar putea să vă placă și