Documente Academic
Documente Profesional
Documente Cultură
EN
Client
001
User
OSS_RFC
Password
CPIC
But this is not which I wanted to discuss here. Here we will check the firewall connection and how to create
these RFC connections automatically.
Before we proceed, maintaining correct hostname(Use FQDN) and its correct IP that can be reached from
outside of you customer network is very important.
So double checking it is best idea.
SAP NetWeaver Administrator: OSS1 & RFC connections SAPOSS, SAPNET_RFC, SDCC_OSS
Scenario 1
In above screen of OSS1, we have SAProuter 1 and SAProuter 2 entry filled, though filling the entry for
SAProuter 1 and SAProuter 2 is not mandatory in order to work your OSS connection in SM59.... BUT from
your server firewall and SAPNet firewall connection should be allowed.
Lets move to this scenario, where both SAProuter 1 and SAProuter 2 entry is filled with your customer hosts
where saprouter is configured.
For discussion sake lets assume the server name is "C" where you are executing OSS1 tcode, and two other
servers are host A and host B as mentioned in figure.
The flow will be C -> A -> B -> SAPNet
1. Login to server C and check the port
telnet <A IP/hostname> 3299
You should get response like below
SAP NetWeaver Administrator: OSS1 & RFC connections SAPOSS, SAPNET_RFC, SDCC_OSS
Scenario 2
When we fill SAProuter 1 only not the SAProuter 2
SAP NetWeaver Administrator: OSS1 & RFC connections SAPOSS, SAPNET_RFC, SDCC_OSS
This means that in client network host A will be entry/exit point and your application servers will be
communicated with SAPNet like this
C -> A -> SAPNet
You have to check your firewall accordingly.
Note 35010 - Service connections: Composite note (overview)
If all these firewall is working fine, the delete all RFC connection related toSAPNet and recreate them as
follows (SAP Note 812386)
1. Transaction OSS1 ->Parameters -> Technical settings -> Change mode -> Save. The SAPOSS destination
can only be updated by saving.
2. Create the RFC destinations again:
Use the following path to create SAPNET_RTCC: SE38 -> RTCCTOOL -> list -> Refresh from
SAPNet
Use the following path to create SAPNET_RFC: SDCC -> Maintenance -> Refresh -> Session
overview
SDCC_OSS is created initially when you activate SDCCN. If you then want to create a new copy
of SAPOSS, use the following path:
SAP NetWeaver Administrator: OSS1 & RFC connections SAPOSS, SAPNET_RFC, SDCC_OSS
SDCCN -> Goto -> Settings -> Task specific -> RFC destinations -> Change mode -> 'Create
destination to SAPNet R/3 Frontend'
Josue Acua
Mar 3, 2015 5:41 PM
Thanks, very good!!
Jacob P George
Mar 14, 2013 12:13 PM
Excellent blog really useful....