Documente Academic
Documente Profesional
Documente Cultură
SHARING SESSION
15 June 2015
15/06/2015
CONTENT
1. BACKGROUND
15/06/2015
1. BACKGROUND
Ooredoo having 3 (three) Frequencies used for 3G network : 2987 (U900 F1), 10712 (U2100 F2),
10737 (U2100 F3).
U900 is the main coverage layer, i.e. more idle mode UEs are expected and less PS traffic is
desired => lower Cell Weight.
U2100 is become capacity layer which mainly handle higher Traffic => higher Cell Weight.
DC-HSDPA is enabled on U2100 layer only which will be preferred by DC capable UE
MIMO is Enabled on U900 Layer only which will be preferred by MIMO Capable UE.
U2100
U2100
U2100
U2100
Periodic measurements and IF-HO if
target U2100 signal good enough
U900
3
15/06/2015
U900
P CPICH of serving
cell
-8
-12
Sintersearch 3 (6
dB)
-16
Ssearch_RAT 1 (2 dB)
Qqualmin (-18 dB)
time
Intra Frequency Neighbor Measurement starts : CPCIH EcNo < Qqualmin+Sintrasearch
Inter Frequency Neighbor Measurement starts : CPCIH EcNo < Qqualmin+Sintersearch
15/06/2015
1
Selected Cell Rank :
Ranking Value
= Measured Neighbor Offset
Qhyst2
time
Treselection
Qhyst2
: 2 dB
Qhyst2 FACH : 2 dB
Qhyst2 PCH : 2 dB
5
15/06/2015
Treselection
Treselection FACH
Treselection PCH
:2s
:2s
:2s
Parameter Name
QqualMin
QrxlevMin
Qhyst1
Qhyst1FACH
Qhyst1PCH
Qhyst2
Qhyst2FACH
Qhyst2PCH
Sintrasearch
SintrasearchConn
Sintersearch
SintersearchConn
Ssearch_RAT
Ssearch_RATConn
Treselection
TreselectionFACH
TreselectionPCH
AdjsPenaltyTime
AdjsQoffset1
AdjsQoffset2
AdjsQqualMin
AdjsQrxlevMin
AdjsTempOffset1
AdjsTempOffset2
AdjiQoffset1
AdjiQoffset2
AdjiQqualMin
AdjiQrxlevMin
AdjiTempOffset1
AdjiTempOffset2
15/06/2015
Name
Minimum required quality level in the cell
Minimum required RX level in the cell
Cell reselection hysteresis 1
Cell reselection hysteresis 1 for FACH
Cell reselection hysteresis 1 for PCH
Cell reselection hysteresis 2
Cell reselection hysteresis 2 for FACH
Cell reselection hysteresis 2 for PCH
S intrasearch
S intrasearch Connected Mode
S intersearch
S intersearch Connected Mode
S search_RAT
S search_RAT Connected Mode
Cell reselection triggering time
Cell reselection triggering time for FACH
Cell reselection triggering time for PCH
Cell Re-selection Penalty Time
Cell Re-selection Quality Offset 1 (CPICH RSCP)
Cell Re-selection Quality Offset 2 (CPICH EcNo)
Cell Re-selection Minimum Quality
Cell Re-selection Minimum RX Level
Cell Re-selection Temporary Offset 1
Cell Re-selection Temporary Offset 2
Cell Re-selection Quality Offset 1 (CPICH RSCP)
Cell Re-selection Quality Offset 2 (CPICH EcNo)
Cell Re-selection Minimum Quality
Cell Re-selection Minimum RX Level
Cell Re-selection Temporary Offset 1
Cell Re-selection Temporary Offset 2
Formula for
Default
Getting Internal Value
Value (internal)
dB Internal_value = gui_value
-18
dBm internal_value = (gui_value - 1) / 2
-58
dB Internal_value = gui_value / 2
0
dB Internal_value = gui_value
0
dB Internal_value = gui_value
0
dB Internal_value = gui_value / 2
2
dB Internal_value = gui_value
2
dB Internal_value = gui_value
2
dB Internal_value = gui_value / 2
5
dB Internal_value = gui_value / 2
5
dB Internal_value = gui_value / 2
4
dB Internal_value = gui_value / 2
4
dB Internal_value = gui_value / 2
2
dB Internal_value = gui_value / 2
2
s
Internal_value = gui_value
2
s
Internal_value = gui_value * 5
10
s
Internal_value = gui_value
2
s
internal_value = gui_value / 10
0
dB Internal_value = gui_value
0
dB Internal_value = gui_value
0
dB Internal_value = gui_value
-18
dBm internal_value = (gui_value - 1) / 2
-58
0
0
dB Internal_value = gui_value
0
dB Internal_value = gui_value
0
dB Internal_value = gui_value
-18
dBm internal_value = (gui_value - 1) / 2
-58
0
0
Units
Default
Value (GUI)
-18 dB
-115 dBm
0 dB
0 dB
0 dB
1 dB
2 dB
2 dB
10 dB
10 dB
8 dB
8 dB
4 dB
4 dB
2s
2s
2s
0s
0 dB
0 dB
-18 dB
-115 dBm
3 dB (0)
2 dB (0)
0 dB
0 dB
-18 dB
-115 dBm
3 dB (0)
2 dB (0)
Current
Value
-18
-56
1
2
2
1
2
2
5
5
6 (U900) & 3 (U2100)
6 (U900) & 3 (U2100)
0
0
2
10
2
0
0
0)
-18
-58
0
0
+10 (U900) & -10 (U2100)
+10 (U900) & -10 (U2100)
-12
-51
0
0
U2100
F2 & F3
Qrxlevmin
Sintrasearch = Sintrasearchconn
Bias to U2100
F1
U2100
- 18 dB
- 18 dB
Sintersearch = Sintersearchconn
12 dB
Ssearch_RAT = Ssearch_RATConn
0 dB
6 dB
0 dB
U900 ->
U2100
-12 dB
U2100 ->
U900
-18 dB
U2100 ->
U2100
-18 dB
AdjiQoffset1
-101 dBm
-10 dB
-115 dBm
+10 dB
-115 dBm
0 dB
AdjiQoffset2
-10 dB
+10 dB
0 dB
HOPI
AdjiQqualmin
U900
U900
AdjiQrxlevmin
15/06/2015
HSDPA + R99
HSDPA + R99
HSDPA + R99
10712 (F2)
HSDPA + R99
HSDPA + R99
HSDPA + R99
2987 (F1)
HSDPA + R99
HSDPA + R99
HSDPA + R99
ADJI
Parameter
Description
15/06/2015
Range value
0 (disabled), 1 (enabled)
0 (disable)
Current Value
Enabled (1)
Inactivity triggered
w/out CM activation,
in case:
NRT/RT RAB is setup
(1st RAB)
AMR call is setup while UE with
assigned NRT RAB is in CELL_DCH or
CELL_FACH/PCH state
Mobility triggered
with CM activation in case:
new cell added (1A/1C) with other PLFIdentifier
than best AS cell
removed cell (1B/1C) has other PLFIdentifier than
best AS cell
fast mobility was detected for UE
SCC made to cell with other PLFIdentifier than in
previous cell
MBLB guard timer expired
Each type can be enabled on cell level independently on others, by corresponding source cell WCEL parameter (enabling in the target
cell not needed):
MBLBRABSetupEnabled
9
15/06/2015
MBLBInactivityEnabled
MBLBStateTransEnabled
MBLBMobilityEnabled
Parameter
Range value
WCEL_HC MBLBRABSetupEnabled
10 15/06/2015
Unit
Formula
Default setting
Disabled (0)
Enabled when UE is in
Cell_FACH/Cell_PCH
state
(1)
Disabled (0)
Disabled (0)
Disabled (0)
Current
Value
1
0
1
0
0
10737 (F3)
10712 (F2)
2987 (F1)
object
ADJI
HOPI
WCEL_SIB
WCEL_SIB
Parameter
BlindHOtargetcell
BlindHORSCPThr
RACHIntraFreqMesQuant
RACHInterFreqMesQuant
WCEL_HC
WCEL_HC
11 15/06/2015
BlindHOEcNoThrTarget
BlindHORSCPThrTarget
Range value
Unit
0 (disabled),
1 (enabled)
-155-25
EcNo (0), RSCP (1)
EcNo (0), RSCP (1)
dBm
-
-24..0
-155-25
dB
dBm
Formula
internal_value = gui_value
internal_value = gui_value * 2
internal_value = gui_value
Default setting
Current Value
0 (disable)
-92
EcNo (0)
EcNo (0)
Enabled (1)
-92
RSCP (1)
RSCP (1)
-24
-92
Description
Blind HO is triggered if there is cell has higher preference score than source cell and target cell is not in HSPA load state.
The target cell with the highest Preference Score is prioritized.
If there are several equally good target cells, selection is randomized.
Not considered
for fast moving
UEs
Preferred
Freq weight
12 15/06/2015
Freq Band
weight
Preference
Score
Not considered
for non-HSPA
UEs or other with
CS RAB in DCH
cell
RSCP
Weight
Load
Weight
= 1000 (the preferred layer for different UE capability and service combinations in used).
= 10 (HSPA Load taken into consideration in layer selection, and given weight 10 for every HSPA Load state)
Preferred
Freq weight
LaySelWeightPrefLayer
= 1000
13 15/06/2015
Freq Band
weight
LaySelWeightBand = 0
(not used)
RSCP
Weight
LaySelWeightRSCP = 0
(not Used)
Preference
Score
Load
Weight
LaySelWeightLoad = 10
LowLoadPreference
= 0 (disabled)
Parameter
Formula
Default setting
Current Value
110000
-
internal_value = gui_value
internal_value = gui_value
1000
-
1000
10712;10737;2987
PFLCSHSAMRNRT
PFLCSHSNRT
PFLCSHSStr
PFLDCHSDAMR
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
10712;10737;2987
10712;10737;2987
10712;10737;2987
10712;10737
PFLDCHSDAMRNRT
PFLDCHSDNRT
PFLDCHSDStr
PFLMIMOAMR
PFLMIMOAMRNRT
PFLMIMONRT
PFLMIMOStr
PFL64QAMAMR
PFL64QAMAMRNRT
PFL64QAMNRT
PFL64QAMStr
PFLFDPCHAMR
PFLFDPCHAMRNRT
PFLFDPCHNRT
PFLFDPCHStr
PFLHSPAAMR
PFLHSPAAMRNRT
PFLHSPANRT
PFLHSPAStr
PFLR99AMR
PFLR99AMRNRT
PFLR99NRT
PFLR99Str
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
10712;10737
10712;10737
10712;10737
2987
2987
2987
2987
10712;10737;2987
10712;10737;2987
10712;10737;2987
10712;10737;2987
10712;10737;2987
10712;10737;2987
10712;10737;2987
10712;10737;2987
10712;10737;2987
10712;10737;2987
10712;10737;2987
10712;10737;2987
10712;10737;2987
10712;10737;2987
10712;10737;2987
10712;10737;2987
PFL
PFL
LaySelWeightPrefLayer
PFLCSHSAMR
PFL
PFL
PFL
PFL
PFL
PFL
PFL
PFL
PFL
PFL
PFL
PFL
PFL
PFL
PFL
PFL
PFL
PFL
PFL
PFL
PFL
PFL
PFL
PFL
PFL
PFL
PFL
14 15/06/2015
Description
Preferred Layer for CS voice HSPA AMR
Preferred Layer for CS voice HSPA AMR and
NRT
Preferred Layer for CS voice HSPA NRT
Preferred Layer for CS voice HSPA Streaming
Preferred Layer for DC-HSDPA AMR
Preferred Layer for DC-HSDPA AMR
and NRT
Preferred Layer for DC-HSDPA NRT
Preferred Layer for DC-HSDPA Streaming
Preferred Layer for MIMO AMR
Preferred Layer for MIMO AMR and NRT
Preferred Layer for MIMO NRT
Preferred Layer for MIMO Streaming
Preferred Layer for 64QAM AMR
Preferred Layer for 64QAM AMR and NRT
Preferred Layer for 64QAM NRT
Preferred Layer for 64QAM Streaming
Preferred Layer for FDPCH AMR
Preferred Layer for FDPCH AMR and NRT
Preferred Layer for FDPCH NRT
Preferred Layer for FDPCH streaming
Preferred Layer for HSPA AMR
Preferred Layer for HSPA AMR and NRT
Preferred Layer for HSPA NRT
Preferred Layer for HSPA Streaming
Preferred Layer for R99 AMR
Preferred Layer for R99 AMR and NRT
Preferred Layer for R99 NRT
Preferred Layer for R99 streaming
Parameter
PFL
LaySelWeightBand
RNMOBI
PreferBandForLayering
PFL
LaySelWeightRSCP
PFL
BlindHORSCPThrBelow
PFL
BlindHORSCPThrAbove
PFL
LaySelWeightLoad
PFL
LaySelLowLoadPref
15 15/06/2015
Range value
Unit
Formula
Default setting
Current Value
1..10000
0..51
1..10000
-115 -25
-115 -25
1..10000
Disabled (0), Enabled (1)
dBm
dBm
-
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
internal_value = gui_value
0
0
0
-126
0
0
Disabled (0)
0
0
0
0
0
20
0
END
18 15/06/2015