Documente Academic
Documente Profesional
Documente Cultură
1. SAFETY means...
: a complete understanding of your work and knowledge of every step that must be taken
2. HAZARD means... hazard is a situation in which one party gets involved in a risky event knowing that it is protected
against the risk
6. RISK ASSESSMENT means... reducing the risk by providing affective planning safe procedure
7. MSDS means...
8. SCAFFOLDING means... a temporary metal or wooden framework that is used to
support workmen and materials during the erection, repair, etc, of a building or other
construction
11.
14.
15.
When noise level is 90dB or above, what is required PPE to be
used?
Ear muffs or Ear plugs
16. When working at height of 6ft. / 1.8m. What is required PPE to be
used?
Personal Fall Arrest system/Full body Harness with double lanyard and 100%
tie off
17.When working near rock breaker, what PPE is required?
Ear plugs or Ear muffs, safety glass, dust mask, safety shoes and safety
helmet
18.Before starting a welding activity, what is the first step to provide?
Secure the Hot work Permit
19.What is the maximum wind speed limit before lifting activity
stoppage?
40kn miles per hour
6. While climbing on ladder, can you carry all your tools safely in your hand?
(F)
7. If the electrical extension cable was damaged, can you repair it by
yourself? (F)
8. When Blue Helmet is not available, Green Helmet can be used? (F)
9. If the HSE Officer is not around (absent), are you allowed to work without
PPE? (F)
10.May an HSE Officer leave the scene of an accident before their
supervisor arrives (F)
11.When an Accident occurs the first step is to call the police (F)
12.An HSE Officer may colour code electrical tools and equipment (F)
13.If anyone is hurt in an accident get in the ambulance and take them to
the hospital (F)
14.
15. An HSE Officer does not need to sign off a permit (F)
Questions
1. List 2 documents that must be completed daily?
1. STARRT Assessment, 2. Daily Site Monitoring Report
2. List 5 Roles and Responsibilities of a HSE Officer?
1. Conducting STARRT Assessment/Conducting daily Toolbox Meetings.
2. Training personnel in safety as per site requirements.
safety
induction
to
all
new
operatives
and
staff,
a. Mechanical failure
b. incremental Weather
c. Human Error
d. Inadequate Insurance Coverage
2. Four communication skills listed below, the most important is:
a. Correct grammar and appropriate use of language
b. high score on vocabulary test
c. Ability to listen efficiently and with personal understanding
d. Clever use of humour
3. Selection of Loss Prevention Methods and Equipment depends
on:
a. The skills of the personnel involved
b. Approval of Top Management
c. Availability of equipment
d. All of the above
4. Personnel selection required in assigning equipment
operation or maintenance responsibility depends on:
a. physical Fitness
b. Knowledge Fitness
c. knowledge of the responsibilities of the assignment
d. All of the above
5. in living a new wall structure at the end of a mild winter day,
consideration should be given to :
a. The weather forecast
b. Whether the temperature will decline to below freezing during the
night
c. Whether the wind will blow during the night
d. how the wall can be protected against freezing and/or wind
damage
6. Governmental safety regulations can best be met by:
a. Challenging their enforcement in court
b. Following the instructions of an inspector
a. 1:30:400
b. 1:29:300
c. 1:50:500
13. What is the most important Safety item we can have:
a. A good safety conscious client
b. Appropriate and quality PPE
c. A ratio of 1:100 of HSE Officers to workers
d. Our minds and good common sense
14. A vital part of a Safety Officer's job is to be able to :
a. Win friends and influence people
b. Communicate with everyone in the Company
c. Talk the loudest and longest at meetings
d. Talk the Company into spending lots of money of safety
15. One of the best Practical and economical ways to educate,
train and motivate is by:
a. Group Communication
b. Technical Bulletin
c. Individual Contact
d. Notice Board Poster
16. A Green Scoff tag means:
a. Unsafe to use
b. Safe to use
c. Under Inspection
d. Just a colour coding
17. A yellow Scoff tag means:
a. Scaffold under inspection
b. Safe to use
c. Unsafe to use
d. Scaffold under erection
18. Who conducts the Weekly Tool Box Talks at the worksite?
a. HSE Officer
b. Foreman In-charge
c. Construction Manager
d. All of the above
19. Who conducts the Daily STARRT (Safety Task Analysis and
Risk Reduction Talks)
a. HSE Officer
b. Construction Manager
c. Foreman In-charge
d. All of the above
20. Who is responsible for recognizing and eliminating unsafe
conditions?
a. OSHA
b. The Employer
c. The Employee
d. Everyone
21. Which of the following hazard is likely to be presented by a
diesel-driven generator?
a. Mechanical failure
b. Electrical
c. Environmental
d. All of the above
22. When permit to work is
UNSAFE, what will you do:
c. Foreman In-charge
d. None of the above
30. PPE helps reduce the:
a. Possibility of accidents
b. Amount of fatigue
c. Extent of Injury
d. Danger to others