Documente Academic
Documente Profesional
Documente Cultură
E Semester: VII
Mechanical Engineering
Subject Name: Automobile Engineering
A. Course Objective
To develop a solution orientedapproach by in depth knowledge of Automobile Engineering.
To address the underlying concepts, methods and application of automotive technology.
B. Teaching / Examination Scheme
Teaching Scheme
SUBJECT
CODE
NAME
Automobile
Engineerin
g
Total
Hrs
Hrs
Hrs
Hrs
Total
Credit
Evaluation Scheme
Total
Hrs
Marks
Marks
Marks
PR. /
VIVO
Marks
70
30
20
30
THEORY
IE
CIA
Marks
150
C. Detailed Syllabus
1. Vehicle Performance:
Forces acting on vehicle in motion, Transmission efficiency, Factors affecting it. Rolling resistance, Grade
resistance, and tractive force with uniform speed and with acceleration of vehicle, Traction characteristic.
Dynamic factor, weight transfer due to various resistances acting on a vehicle in motion. Stability of a vehicle
in motion around the curve.
2. Chassis Frame & Body:
Types of frames engine location. Caparison of front and rear mounting of engine. Arrangement of clutch
assembly, gearbox, propeller shaft with universal joints. Front and rear differentials, rear, front and four
wheel drives, their relative merits, types of chassis pre requirements of body, types of bodies & their
construction.
3. Transmission System:
Clutch: Constructional features of clutch used in two wheelers, three wheelers, components of each type,
their functions, force acting on them. Calculation of surface area and number of driving and driven plates.
Nature of wear and tear each components, effect of misalignment and mis adjustment of components.
Trouble shooting charts.
Gear Box: Sliding, constant mesh and synchro mesh, type gear box transfer case of four wheel drive
vehicle. Automatic gear transmission fluid coupling torque converter, over speed drive and its working.
Propeller Shaft: Universal joints, slip joint, constant velocity joint, whirling of propeller shaft, Hotchkiss &
Torque tube Drives.
Final Drive and Rear Axle: Types of front drive, differential conventional and non-slip type, pinion
adjustment. Diagnosis of faults, types of rear axle.
4. Axle, Suspension and Steering System:
Front Axle: Types, Construction, Components and their functions.
Suspension System: Principle, type of suspension system, conventional and independent front and rear
axle. Spring, rubber and air suspensions, automatic/Hydro suspension system.
Steering System: Steering Layout, types of steering gears, staring linkages, steering mechanism,
definitions, and significance of camber, caster king, pin inclination, toe in and toe out on turn. Measurement
and adjustment of various steering system layouts, steering ratio, under steering and over steering, power
assisted steering, steering geometry, wheel alignment, and diagnosis of fault.
5. Brakes:
Principles and types of various brakes, power assisted brakes, braking distance, braking efficiency wei9ght
transfer, self engineering effect and braking torque capacity. Faults, their diagnosis, adjustment and
maintenance.
6. Wheels & Tyres :
Types of wheels, types of tyres, tyre construction, constituents of tyre, tyre tread pattern, tyre pressure and
wear, tyre properties tyre size, tyre maintenance.
7. Electrical Systems :
Battery: Construction, working, methods of rating, faults, charging methods, test, generator and cranking
motor with drive purpose, construction, faults and diagnosis, voltage and current regulator, purpose, typical
circuit, layout, working principle, voltage setting.
Lamps, Lighting and other circuits: Electrical necessaries such as fuel gauge, temperature gauge, wiper,
speedometer.
8. Study of Modern Vehicle:
Construction and operational features of four wheelers available in Indian market.
9. Garages & Servicing and Trouble Shooting:
Garaging & its types, equipments for garages, tools in a service station, services carried out in garages and
service station. Necessity and types of servicing, cleaning. Engine decoking automobile overhauling, car
battery services, trouble shooting and remedy.
10. Air Pollution and Control:
Pollutants from gasoline engines, evaporation losses, crank case blow by, exhaust emission and effect of
operating variables and electronic fuel injection, gasoline engine emission control methods a such as engine
design modification, treatment of exhaust gas and fuel modification, blow by control package, evaporative
loss control device, catalytic voncertor, control of nox and total emission control package, diesel engine
emission and control. Standards for emission of pollutants from motor vehicles, National ambient air quality
standards, Euro norms, Methods of issuing PUC certificate
11. Automobile Law:
Motor vehicle act, Registration of motor vehicles, driving license, control of traffic, Insurance against third
party, claims for compensation.
12. Silencer - Mufflers types:
Baffle type, wave cancellation type, resonance type, absorber type, combined resonance and absorber type.
Their construction and capacity to damp high and low frequency waves.
D. Lesson planning
SR.NO.
1
2
3
4
5
DATE/WEEK
1ST , 2ND , 3RD
4TH ,5TH , 6TH
7TH ,8TH , 9TH
10TH ,11TH , 12TH
13TH ,14TH , 15TH
UNIT NO.
1, 2, 3
4, 5
6, 7
8, 9, 10
11, 12
%WEIGHTAGE
20
20
20
20
20
TOPIC NO.
1, 2, 3
4, 5
6, 7
8, 9, 10
11, 12
SUBJECT
CODE
NAME
Refrigeratio
n and Airconditioning
Total
Hrs
Hrs
Hrs
Hrs
Total
Credit
Evaluation Scheme
Total
Hrs
Marks
Marks
Marks
PR. /
VIVO
Marks
70
30
20
30
THEORY
IE
CIA
Marks
150
C. Detailed Syllabus
1. Refrigeration an Introduction: heat load, development of refrigeration, aircraft refrigeration,
Bell-Coleman cycle, Bootstrap air refrigeration system, types of aircycles, advantages and
disadvantages
2. Vapor Compression system: Simple system on P-h diagram, analysisof the simple cycle, factors
affecting the performance of the system, actual cycleconsidering different losses.
Compound Compression System: Need, flash tank, Compound compression withflash and inter
cooler, all evaporators working at the same temperature, evaporatorswith back pressure valves and
with multiple expansion valves without flash intercooling, analysis of two evaporators with flash inter
cooler and individual andmultiple expansion valve, estimation of power requirement and COP.
3. Absorption refrigeration system:
Characteristics of refrigerant, selection of pair, practical water -NH3 cycle, Li Br system and its
working.
4. Refrigeration system components: Compressors, condensers, expansion devises, evaporators its
types construction and working, comparison and selection,refrigeration piping accessories and
controls, thermal insulation properties andclassification, thickness of insulation.
6. Refrigerants: designation of refrigerants, Types of refrigerants, desirable properties of refrigerants,
development, classification, secondaryrefrigerants, future industrial refrigerants.
7. Psychrometry and psychrometric terms: properties of air, Daltons law of partialpressure,
humidity, temperature, enthalpy of moist air, temperature and humiditymeasuring instruments,
plotting psychrometric chart, psychrometric processes such a sensible heating, cooling, heating and
humidification cooling and dehumidification,chemical dehumidification, adiabatic saturation.
8. Human comfort: air temperature and human body, body thermoregulation, effective temperature,
comfort chart and factors governing effective temperature.
9. Load analysis: Site survey, outdoor design conditions. Indoor design conditions,classification of
loads, Flywheel effect of building material and its use in design,effect of wall construction on cooling
load, instantaneous heat gain ( IHG ) andinstantaneous cooling load (ICL) heat transmission through
sunlit and shaded glassusing tables, method of reduction of solar heat gain thorough glass, total
equivalenttemperature difference, calculations of cooling load TETD due to sunlit and shadedwalls
using tables, air infiltration and load due to outside air, ventilation, heat gainfrom occupants, electric
lights, product, electric motor and appliances, use of loadestimation sheet, Brief introduction about
recent ASHRAE Methods.
10. Duct Design and air distribution: Function, classification economic factorsinfluencing duct
layout, duct design methods, velocity reduction, equal friction andstatic regain method, use of friction
chart equivalent diameter, dynamic losses and its determination, Requirements of air distribution
system, terms in air distribution, grills, outlets, application, location
11. Air-conditioning systems: classification, system components, all air, all water, air water systems,
room air conditioners, packaged air conditioning plant, central air conditioning systems, split air
conditioning systems
12. Air conditioning system components: fans types laws, classification and selection, air cleaning
devices classification, types, construction and working, humidifiers and dehumidifiers
13. Refrigeration and air-conditioning application: food preservation, icemanufacturing, cold
stores, air-conditioning of residential, commercial buildings, Clean Room, Tunnel Ventilation, AHU,
AWU, Industrial HVAC Applications
D. Lesson planning
SR.NO.
1
2
3
4
5
DATE/WEEK
1ST , 2ND , 3RD
4TH ,5TH , 6TH
7TH ,8TH , 9TH
10TH ,11TH , 12TH
13TH ,14TH , 15TH
UNIT NO.
1, 2, 3
4, 5, 6, 7
8, 9, 10
11, 12
13
%WEIGHTAGE
20
20
20
20
20
TOPIC NO.
1, 2, 3
4, 5, 6, 7
8, 9, 10
11, 12
13
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Arora. C.P., Refrigeration and Air Conditioning, McGraw-Hill New Delhi, 1988
Manohar Prasad, "Refrigeration and Air Conditioning", Wiley Eastern Ltd., 1983
Ramesh Arora , Refrigeration and Air-conditioning, Prentice Hall of India, 2010
Roy.J Dossat, Principles of Refrigeration, Pearson Education 2009.
W.F.Stocker and J.W.Jones, Refrigeration and Air Conditioning", McGraw-Hill, 2009.
Desai P.S, Modern Refrigeration and Air-conditioning Khanna Publishers, 2004
S C Arora & S Domkundwar, Refrigeration and Air-Conditioning Dhanpat Rai Publication,
2009
Jordon and Prister, Refrigeration and Air Conditioning, Prentice Hall of India PVT Ltd.,
NewDelhi, 2009
Sapali S.N., "Refrigeration and Air Conditioning", PHI Learning Private Ltd, 2009.
Ahmadul Ameen "Refrigeration and Air Conditioning", Prentice Hall of India Pvt. Ltd. 2010
S.S Thispee Refrigeration and air-conditioning , Jaico Publications, 2009
ASHRAE Handbook (Fundamental), 2013
SUBJECT
COD
E
NAME
Computer
Integrated
Manufacturing
Total
Hr
s
Hr
s
Hr
s
Hrs
Total
Credi
t
Evaluation Scheme
Total
Hr
s
Mark
s
Mark
s
Mark
s
PR. /
VIVO
Mark
s
70
30
20
30
THEORY
IE
CIA
Mark
s
150
C. Detailed Syllabus
1. Introduction:
Rationale for CAD/CAM, Computer aided Manufacturing, The CAM hierarchy, elements of CAM-Database,
Production Management, Manufacturing control, NC/CNC, Product Design & Development, benefits,
limitations and applications
2. Numerical control in machine tools:
Types-Numerical, Direct Numerical, Computerized Numerical and Distributive Numerical, evolution of
controller, adoptive control, tool conditioning monitoring, classification of NC/CNC machine tools, velocity
control and position control, block diagrams for NC and CNC machines, factors considered for selecting
components for NC/CNC machining, factors influencing selection of NC/CNC machine tools. Construction
and working of Main parts of NC/CNC machine tools:-Speed drives, feed drives, re circulating ball screw,
linear motion guide, machine slides, spindle, bed, structure, linear and rotary transducers, chip conveyor,
automatic tool changer, tools and tool holders, CNC systems and their specifications and advanced features,
MCU types and functions, interpolators- functions, types, hardwares and softwares, NC tape, tape formats
and various types of tape readers. CNC lath, turning center, CNC milling machine and Machining centers.
NC coordinate systems, work piece zero systems, absolute and incremental programming, NC motion control
(PTP, Straight cut and Contouring), open loop and closed loop systems, Component Drawing Instruction and
its use.
Manual part programming :- Various types of programming formats, G codes, M codes and other codes,
Canned cycles, radius compensation, programming exercises for drilling, milling and turning, subroutine,
parametric subroutine.
Computer assisted programming: - Enlist languages, Automated programmed Tools (APT)-geometrical
motion, auxiliary and post processor statements, APT programs for drilling, milling and turning, tool path
generation and verification. CNC programming based on CAD/CAM
Software: - The CAD/CAM approach to part programming- machining from 3D models.
3. Computer aided production & operation management:
Basic concepts of Computer Aided Forecasting and Computer Aided Plant Layout
Material Requirement Planning Systems:- basics, input -product tree structure, Master Production
Schedule and Inventory Status File, structure, output report, working of system, benefits and limitations,
Pegging, Cycle counting, Updating and Time fence, Capacity Requirement Planning.
Scheduling:- Single machine-Branch and bound method
Flow shop-Johnson's rule, and CDS heuristic
Job shop- Priority Dispatching rules, heuristic and Indexing method
Group Technology:- Objectives, part families, similarities, design and Manufacturing attributes, two hurdles
in implementing G. T., classification methods- visual inspection, product flow analysis and coding, need and
types of structure, Opitz, MICLASS and CODE coding systems, G.T. machine cells and types, concept of
composite part, benefits and limitations.
Computer Aided Process Planning:- Variant and Generative CAPP, benefits, Machinability Data System,
Computer Generated Time Standard forward and backward planning, implementation considerations, CAPP
Systems-CAM-I CAPP, MUL TICAPP, APPAS and CADCAM, AUTOPLAN, GARI, CPPP and TIPPS.
Computer Aided Quality Control:- Computer in Q.C., Contact inspection methods, non contact inspection
such as optical and non optical methods, computer aided testing, benefits and limitations.
4. Flexible Manufacturing Systems:Introduction, objectives of an ideal FMS, applications, classification, functional components, hardware
components, FMC, pallets and fixtures, elements of an FMS- NC/CNC machines, three coordinate measuring
machines, robots, conveyors, AGVs, ASRS and computers and their functions, FMS layouts, specifications,
benefits, limitations, quantitative analysis, FMS planning and implementation issues.
5. Computer Integrated Manufacturing:Introduction, CIM concepts-IBM, Siemens, Digital Equipment Corporation, E-Spirit-CIM-OSA model,
NIST, AMRF, CIM hardware CIM software, development of CIM, specifications, CIM database and database
management system.
6. Robots:Components, classifications, various types of physical configurations, specifications, basic motions, robot
control, methods of programming the robot, economic considerations which can be used as a competitive
weapon and selection and industrial applications of robots.
7. CAD/CAM integration:Introduction, activities involved in CAD/CAM integration such as 3D modelling, analysis and optimization,
2D drafting and drawing, database management, process planning, tool design, NC programming and
inspection, case studies, brief description of commonly used software packages and their use in area of
CAD/CAM/CAE.
D. Lesson planning
SR.NO
1
2
3
4
5
DATE/WEEK
1ST , 2ND , 3RD
4TH ,5TH , 6TH
7TH ,8TH , 9TH
10TH ,11TH , 12TH
13TH ,14TH , 15TH
UNIT NO
1, 2
3
4, 5
6
7
%WEIGHTAGE
20
20
20
20
20
TOPIC NO
1, 2
3
4, 5
6
7
5. Assignment based on course content will be given to the student for each unit/topic and will
be evaluated at regular interval. It may carry an importance of ten marks in the overall
internal evaluation.
6. Surprise tests/Quizzes/Seminar/Tutorial may be conducted and having share of five marks in
the overall internal evaluation.
7. The course includes a laboratory, where students have an opportunity to build an appreciation
for the concept being taught in lectures.
8. Practical / Oral:Term work shall be carried out to fulfill the practical credits related to course
contents.
F. Students Learning Outcomes
Numerical Control & Computer Aided Manufacturing-T. K. Kundra & P.N. Rao
CAD,CAM,CIM- P. Radhakrishnan & S.Subranarayan- New Age International
CAD, CAM, CIM- Mikell P. Groover & EN. Zimmers- Prentic Hall
Computer Aided Manufacturing-Chang and Wysk
Computer Aided Manufacturing S. Vishal-S. K. Kataria & Sons-Delhi
Computer Aided Production Management-P.B. Mahapatra
Computer Numerical Control Machines- P. Radhakrishnan-New Age International
Production &Operation Management-R. Paneerselvam- Prentic Hall
SUBJECT
CODE
NAME
Total
Hrs
Hrs
Hrs
Hrs
Production
Technology
Total
Credit
Evaluation Scheme
Total
Hrs
Marks
Marks
Marks
PR. /
VIVO
Marks
70
30
20
30
THEORY
IE
CIA
Marks
150
C. Detailed Syllabus
1
Metal Cutting:
Cutting Tool Material: - Desirable properties, names and their compositions, red hot hardness
temperatures, permissible and economical cutting velocities, properties and applications.
Types of cutting tools: - Solid, brazed tipped and mechanically clamped inserts, types of inserts.
Tool geometry and Force analysis :Single point cutting tool, Drill, multiple point cutting tool and form tools, reference planes, ASA
system, Orthogonal rake system and Maximum rake system, Tool signature and influence of each
elements on machining
Theory of metal cutting:- Orthogonal and oblique cutting, mechanics of chip formation and types of
chips produced, chip thickness ratio, shear plane angle and its effect, forces, coefficient of friction,
shear strain, power in machining, Merchant circle diagram and its assumptions and use, chip breakers,
tool dynamometers, tool wears and methods of tool failure, tool life, significance of temperature and
sources of heat generation, temperature measurement, cutting fluids and their properties, economics of
machining, machinability and its evaluation.
Design of press working tools:
Cutting operation, types of die cutting operation, piercing die design, blanking die design, compound
die design, scrap strip layout for blanking, evolution of a blanking die.
Analysis of machine tools:
Working and auxiliary motions in machine tools.
Design and analysis of machine tool elements like bed, structure, slide-ways and guide ways and
spindle, selection of material, static and dynamic stiffness, and dynamic rigidity. Drives in machine
tools, stepped regulation of speed and feed, A.P. and G.P. series, layout of spindle speeds saw tooth
diagram, structure, ray diagram and calculation of gear teeth and shaft diameter.
Semi Automats and Automats:
Capstan and turret lathes, classification of automats, specifications, tooling equipments, bar stock
feeding methods, universal chucking equipments, tool layout for turret, capstan and automats, single
spindle and multi spindle automats, bar type and chucking type machines their principles of working
constructional details and tool setting, Design of cam for single spindle automat.
Transfer machines:
Introduction, product design for transfer machine selection, selection of transfer devices, classification,
function of in-line transfer machine, transfer methods in the in-line transfer machine like rotating bar,
walking beam and pawl type, and transfer machine control systems.
Modern machining Processes:
Purpose, need and classification and aspects considered in selection of a process.
Principle, construction, working, process parameters and their influence on machining, selection of
parameters and product applications of the following processes:
Ultrasonic machining, Abrasive jet machining, Water jet machining, Chemical machining, Electro
chemical machining and grinding, Electro discharge machining, Plasma arc machining, Laser beam
machining, Electron beam machining and Hot machining.
Gear and Thread manufacturing:
Gear manufacturing: - Classifications of methods, generating methods, gear hobbing, gear shaping
and gear finish process and quality of gear.
Thread manufacturing:-Thread milling, thread grinding and thread rolling, Thread rolling machines
and quality of thread.
Jigs and Fixtures:Usefulness and principles of jig-fixture design, principles of location, types of locators, types of
clamping devices, types of bushes, selection of locators, clamps and bushes, types of jig, their relative
merits, demerits and applications, materials for various elements of jig-fixture, design of milling,
turning and boring fixtures, testing of jig-fixture and economics of jig-fixture.
Tracer controlled Machine tools:Introduction, mechanical copying machine, hydraulic tracing devices, electric tracing systems and
automatic tracing.
D. Lesson planning
SR.NO
1
2
3
4
5
DATE/WEEK
1ST , 2ND , 3RD
4TH ,5TH , 6TH
7TH ,8TH , 9TH
10TH ,11TH , 12TH
13TH ,14TH , 15TH
UNIT NO
1
2, 3
4, 5
6, 7
8, 9
%WEIGHTAGE
20
20
20
20
20
TOPIC NO
1
2, 3
4, 5
6, 7
8, 9
7. The course includes a laboratory, where students have an opportunity to build an appreciation
for the concept being taught in lectures.
8. Practical / Oral:Term work shall be carried out to fulfill the practical credits related to course
contents.
SUBJECT
CODE
NAME
Total
Hrs
Hrs
Hrs
Hrs
Control
Engineering
Total
Credit
Evaluation Scheme
Total
Hrs
Marks
Marks
Marks
PR. /
VIVO
Marks
70
30
20
30
THEORY
IE
CIA
Marks
150
C. Detailed Syllabus
1
2
3
Introduction:
Types and classification of control systems, applications to engineering industries.
Basic control system:
Mathematical modeling and its importance, System differential equation of electrical, Mechanical,
Thermal, Hydraulic and Electromechanical network, analogy.
Theory of Automatic Control :
Concept of feedback referred to linear control systems in general, e.g. displacement and speed
control, process control, definition and terminology. Open loop and closed loop systems and
advantage.
Block diagrams and signal flow graph representation of physical systems. Block diagram algebra,
transfer function from block diagram. Applications of Laplace transform methods,
Basic control actions and controllers on off, proportional, derivative and integral and PID
controllers, steady state analysis. Transient response of first order and second order systems to
step, ramp and sinusoidal input, steady state errors. Rouths stability criteria and root locus methods,
improving system performance.
Hydraulic system:
Characteristic of hydraulic components control valves, source of hydraulic power, hydraulic motors,
Pistons and transmission. Elements of circuit design. Accumulation control circuits such as position
control and speed control circuit. Hydraulic control machine tools.
5
6
7
8
9
10
11
Pneumatic systems:
Pneumatic power supply, amplifiers with different controlling actions, Pneumatic valves and
cylinders. Three, four way pilot valves, Pneumatic control of machine tools.
Electrical systems:
Speed control of D.C. motors, Remote control positional servo -mechanism (including effect of
gearing between motor and load).
Control components:
Pneumatic relays, control mechanisms for liquid level, boiler feed control, pressure regulation,
throttle valve, temperature regulations and industrial process regulation.
Maintenance of hydraulic system:
Fire Foam resistance oxidation and corrosion of hydraulic pipe sealing devices, Filters regulator,
problems caused by gas in hydraulic circuit cooling of power pack
Microprocessor based digital control:
State space analysis optional and adaptive control systems Industrial logic control system programmable logic controller and its applications.
Fuzzy Logic:
Concept of fuggy logic, basic notions, linguistic variables of fuggy control comparison of design
methodology, examples and case study
Control Systems:
Mechanical engineering systems like thermal power plants, boiler, refrigeration plants, central airconditioning plants and automobiles.
D. Lesson planning
SR.NO
1
2
3
4
5
DATE/WEEK
1ST , 2ND , 3RD
4TH ,5TH , 6TH
7TH ,8TH , 9TH
10TH ,11TH , 12TH
13TH ,14TH , 15TH
UNIT NO
1,2
3,4
5, 6
7, 8, 9
10, 11
%WEIGHTAGE
20
20
20
20
20
TOPIC NO
1,2
3,4
5, 6
7, 8, 9
10, 11
Can find the applications of all the areas in day to day life.
SUBJECT
COD
E
NAME
Artificial
Intelligenc
e and
Robotics
Total
Hr
s
Hr
s
Hr
s
Hrs
Total
Credi
t
Evaluation Scheme
Total
Hr
s
Mark
s
Mark
s
Mark
s
PR. /
VIVO
Mark
s
70
30
20
THEORY
IE
CIA
Marks
120
C. Detailed Syllabus
1. Scope of AI
Games theorem, natural language processing, vision and speech processing, robotics, expert systems,
AI techniques- search knowledge, abstraction.
2. Problem solving
State space search; Production systems, search space control: depth first, breadth-first search,
heuristic search - hill climbing, best-first search, branch and bound. Problem Reduction, Constraint
Satisfaction End, Means-End Analysis
3. Knowledge Representation
Predicate Logic: unification, modus pones, resolution, dependency directed backtracking.
Rule based Systems: forward reasoning, conflict resolution, backward reasoning, use of no
backtracks.
Structured Knowledge Representation: semantic net slots, exceptions and default frames, conceptual
dependency, scripts.
4. Handling uncertainty and learning:
Non-monotonic reasoning, probabilistic reasoning, use of certainty factors, fuzzy logic, Concept of
learning, learning automation, genetic algorithm, learning by inductions, neural network.
5. Robotics:
Robot Classification, Robot Specification, notation
Direct and InverseKinematics: Co-ordinates Frames, Rotations, Homogeneous Coordinates
D. Lesson planning
SR.NO
1
2
3
4
5
DATE/WEEK
1ST , 2ND , 3RD
4TH ,5TH , 6TH
7TH ,8TH , 9TH
10TH ,11TH , 12TH
13TH ,14TH , 15TH
UNIT NO
1
2
3
4
5
%WEIGHTAGE
20
20
20
20
20
TOPIC NO
1
2
3
4
5
The student can identify different areas of Artificial Intelligence and Robotics.
Can find the applications of all the areas in industry.
A. Course Objective
To present a problem oriented in depth knowledge of Quality and Reliability Engineering.
To address the underlying concepts, methods and application of Quality and Reliability
Engineering.
B. Teaching / Examination Scheme
Teaching Scheme
SUBJECT
CODE
NAME
Total
Hrs
Hrs
Hrs
Hrs
Quality and
Reliability
Engineering
Total
Credit
Evaluation Scheme
Total
Hrs
Marks
Marks
Marks
PR. /
VIVO
Marks
70
30
20
THEORY
IE
CIA
C. Detailed Syllabus
1. Introduction:
Quality Concept, Different Definitions and Dimensions, Inspection, QualityControl, Quality
Assurance and Quality Management, Quality as WiningStrategy, Views of different Quality Gurus.
2. Total Quality Management TQM:
Introduction, Definitions and Principles of Operation, Tools and Techniques,such as, Quality Circles,
5 S Practice, Total Quality Control (TQC), TotalEmployee Involvement (TEI), Problem Solving
Process, Quality FunctionDeployment (QFD), Failure Mode and Effect analysis (FMEA), Fault Tree
Analysis (FTA), Kizen, Poka-Yoke, QC Tools, PDCA Cycle, QualityImprovement Tools, TQM
Implementation and Limitations.
3. Introduction to Design of Experiments:
Introduction, Methods, Taguchi approach, Achieving robust design, Steps inexperimental design
4. Just in Time and Quality Management:
Introduction to JIT production system, KANBAN system, JIT and QualityProduction.
5. Introduction to Total Productive Maintenance (TPM):
Introduction, Content, Methods and Advantages
6. Introduction to ISO 9000, ISO 14000 and QS 9000:
Basic Concepts, Scope, Implementation, Benefits, Implantation Barriers
7. Contemporary Trends:
Marks
120
DATE/WEEK
1ST , 2ND , 3RD
4TH ,5TH , 6TH
7TH ,8TH , 9TH
10TH ,11TH , 12TH
13TH ,14TH , 15TH
UNIT NO
1, 2
3, 4
5, 6
7, 8
9
%WEIGHTAGE
20
20
20
20
20
TOPIC NO
1, 2
3, 4
5, 6
7, 8
9
The student can identify different areas of Quality and Reliability Engineering.
Can find the applications of all the areas in industry.