Documente Academic
Documente Profesional
Documente Cultură
Uses
Surface preparation
Advantages
Note :
Mixing
Density
Tensile strength
(BS 6319: Pt 7)
Compressive strength
(ASTM C109)
Shear adhesion
(to BS 5980:1980)
Bond strength
Minimum open time
Measure out 4.4 to 4.8 litres of clean water into the mixing
vessel and add the liquid component, stir thoroughly until
dispersed. With the mixing paddle in operation, add the
powder component to the mix and continue mixing for 2 to
3 minutes until a uniform, lump-free consistency is achieved.
Application
Once mixed, Nitotile LM is spread on the substrate to a
uniform thickness of 2-3mm. This is then combed
horizontally.
Place tiles firmly into adhesive bed ensuring good contact
with a twisting motion. Only apply to areas which can be
tiled in the adhesives open wet time (up to 1m2 at a time).
Joints
Properties
Nitotile LM
:
:
1650 kg/m3
1.7 N/mm2 @ 28 days
Complies to Class AA
:
:
Limitations
Precautions
:
:
20 kg bags
0.8 litre
15.4 litres/pack
Yield
Nitotile LM
During use, avoid inhalation of the dust and contact with the
skin or eyes. Wear suitable protective clothing - eye
protection, gloves and respiratory equipment (particularly in
confined spaces).
The use of barrier creams to provide additional skin protection
is also advised. In case of contact with the skin, rinse with
plenty of clean water, then cleanse thoroughly with soap and
water.
Supply
Nitotile LM powder
Nitotile LM liquid
Storage
Fire
Nitotile LM is non-flammable
Additional information
DUBAI
ABU DHABI
BAHRAIN
KUWAIT
OMAN
QATAR
Al Gurg Fosroc
Al Gurg Fosroc
YBA Kanoo
Boodai
GETCO
Tadmur
TEL : 738200
FAX : 732828
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard terms and conditions of sale, copies of which
may be obtained on request. Whilst Fosroc endeavours to ensure that the technical information on this data sheet is correct at the time of printing, it is the
customers responsibility to satisfy himself, by checking with the company that this information is still current at the time of use, that the product is suitable for
the intended application, and that the actual conditions of use are in accordance with those recommended. Because Fosroc has no control over the conditions of
use of its products, all recommendations or suggestions regarding the use of these products are made without guarantee.
www.fosrocgulf.com
UAE/0274/01/F