Sunteți pe pagina 1din 4

System 800xA Training

Reference Documentation
Document

Item number

Industrial IT 800xA - System

3BSE 038018

System Guide Functional Description


Industrial IT 800xA - System

3BDS 011222

Configuration
Industrial IT 800xA - System

3BSE 036903

Basic Operation
Industrial IT 800xA - System

3BSE 036904

Extended Operation
Industrial IT 800xA - Engineering

3BDS 100968

Engineering Workplace - Function Designer, Introduction and Basic Operation


Industrial IT 800xA - Control and I/O

3BSE 035983

OPC Server for AC 800M - Configuration


Industrial IT 800xA - Control and I/O

3BSE 035980

Basic Control Software - Introduction and Configuration


Industrial IT 800xA - Control and I/O

3BSE 035981

Extended Control Software - Binary and Analog Handling


Industrial IT 800xA - Control and I/O

3BSE 035982

Communication - Protocols and Design


Industrial IT 800xA - Control and I/O

3BSE 036351

AC 800M Controller Hardware - Hardware and Operation


Industrial IT 800xA - Control and I/O

3BSE 020923

S800 I/O - General Information and Installation


Industrial IT 800xA - Control and I/O

3BSE 020924

S800 I/O - Modules and Termination Units


Industrial IT 800xA - Control and I/O

3BSE 020926

S800 I/O - Fieldbus Communication Interface PROFIBUS-DP/DPV1

T308-01 References - RevC

Terminology
Term / Acronym

Description

ActiveX

Microsoft standard for user interface components, based on definition of software interfaces.

Afw Service

A software component that provides a certain set of functions in the system, typically for use by
various client applications.
An Afw Service is designed to run around the clock. It can normally be portioned into several
service groups, each group handling part of the scope of the service (e.g. part of the object
space). For redundancy each group can contain several service providers running on different
servers.

Alarm

An alarm is an abnormal state of a condition associated with an Aspect Object. For example, the
object FC101 may have the following conditions associated with it:
HighAlarm, HighHighAlarm, Normal, LowAlarm, and LowLowAlarm.
An alarm is active as long as the abnormal state of the corresponding condition persists. An
alarm is unacknowledged until a user has acknowledged it.

Application Server

Server that runs system applications, such as the Information Management History Services,
Production Management (Batch Management and Production Management), Asset Optimization,
Process Optimization, Simulation, and also third party and user provided applications

Aspect

A representation of a facet of a real world entity, which entity is represented as an Aspect Object.
An aspect defines a piece of information, and a set of functions to create, access, and
manipulate the information.

Aspect Framework (Afw)

Platform functionality that supports integration of aspect systems and connectivity components,
including concepts, APIs, and tools.

Aspect Object

Aspect Objects are representations of real world entities that a user interacts with, such as
valves, reactors, products, material, production orders, batch procedures, customer accounts,
etc.
Different facets of these real world entities are modeled as aspects. An Aspect Object is not an
object in a strict sense, e.g. like a COM object, but rather a container of references to
implementations of its aspects.

Aspect Server

A server that runs the central functions of the Aspect Object architecture, such as Aspect
Directory, Structure and Name Server, Cross Referencing, File Set Distribution, etc.

Audit trail

An automatic record of all operator and engineering actions, showing who made the action and
when. Actions include operator actions, such as opening a valve, starting a manufacturing
sequence, entering some data, acknowledging an alarm, etc., as well as entries, changes,
moves or deletes of electronic records, system configuration data, and security settings.
In the IndustrialIT System 800xA, the audit trail is a subset of all events, including those events
that are classified as audit events.

Authentication

The process by which the system validates the user's logon information. A user's name and
password are compared against an authorized list. If the system detects a match, access is
granted to the extent specified in the permissions list for that user.

CEX bus

Communication Expansion Bus

Client

Client is a part of a software that subscribes data from a server.

Client/Server network

A client/server network is used for communication between servers, and between workplaces
and servers.

CLS

Central Licensing system of 800xA.

Connectivity Server

A server that provides access to controllers and other sources for real-time data, historical data,
and alarm and event data. A Connectivity Server runs services related to OPC/DA, APC/AE,
OPC/HDA, and SysMsg

Control Builder M (CBM)

The programming tool for AC800M. Often referred to as Control Builder or CBM.
Control Builder M Professional is integrated into the System 800xA.

Control Module (CM)

Control Modules are programming units that support object-oriented data flow programming with
code sorting, free layout graphical programming and static parameter connections. Instances of
control modules are created from control module types.

System 800xA Training

Control network

A control network is a local area network (LAN) that is optimized for high performance and
reliable communication with predictable response times in real time. Control network devices and
servers are connected to the control network.

DNS

Domain Name System

Double authentication

The process of identifying two individuals, usually based on usernames and passwords. Double
authentication is typically used to ensure that certain critical operations are performed by an
authorized individual and approved by an additional individual, where the additional individual
has the authority to approve such operations.

Entity

A collection of Aspect Objects and aspects that a user treats as a unit with respect to various
phases of engineering.

Event

An event is a detectable occurrence, which is of significance to an Aspect Object. An event may


or may not be associated with a condition.
For example, the transitions into HighAlarm and Normal conditions are events, which are
associated with conditions. However, operator actions, system configuration changes, and
system errors are examples of events, which are not related to specific conditions.

Faceplate

An aspect that provides a graphical representation of a certain Aspect Object, with presentation
of certain properties related to the object, and mechanisms for operator interaction such as
on/off, increase/decrease, etc.

Fieldbus

A fieldbus is used to interconnect field devices, such as I/O modules, smart sensors and
actuators, variable speed drives, PLCs, or small single loop devices, and to connect these
devices to the 800xA system.

Function Designer

Engineering tool for configuration of Function Diagrams. Supports 800xA for AC 800M / Control
Builder M Professional and Fieldbus Builder PROFIBUS / HART.

Graphic display

An aspect that provides a visual presentation. It consists of static graphics representing for
example tanks, pipes, etc., and graphic elements that present dynamic information. Graphic
displays are often used to present the state of a process or a part of a process, but are useful in
any context where dynamic graphical information needs to be presented.

Graphic element

A graphic element is an aspect that is associated with an Aspect Object type, to be used in
graphic displays to present dynamic information for instances of that type. An object type may
have several different graphic element aspects to allow the user to select among different visual
presentations.

Graphics Builder

Tool for configuration of graphic aspects: Graphic displays, graphic elements, faceplate
elements, etc. It is built on Visual Basic.

HSI

Human System Interface

Industrial IT

ABB's vision for enterprise automation.

IP address

A 32-bit address assigned to each host/node connected on the network.

LANs

Local Area Network

Library
(Object type library)

A collection of Aspect object types that are kept together from a distribution and lifecycle
management point of view. A library can consist of a base library and several extension libraries.

Log over

Temporarily changing user, without first logging out the current user and without breaking the
current context.
This function is useful in cases were a certain operation requires higher authority than that held
by the current user, in which case e.g. a supervisor may temporarily assume the responsibility,
allowing his or her authority to be temporarily applied.

MMS

Manufacturing Message Specification. ISO standard for communication between controllers.

Node

A computer communicating on a network e.g. the Internet, Plant, Control or I/O network. Each
node typically has a unique node address.

OPC

OLE (Object Linking and Embedding) for Process Control, a standard interface for data, event
and history access based on COM.

OPC item

OPC items represent connections to data sources, i.e. object properties. An OPC item is
identified by a string <object path>:<property name>. Associated with each OPC item are Value,
Quality and Time Stamp.
Note that OPC items are not identical with the data sources they represent connections to
them.

T308-01 References - RevC

Operator Workplace

Provides a user interface for efficient control and supervision of processes.

Plant Explorer

A configuration of the Internet Explorer for creating the Aspect Object that you use to put
together the plant. You can also use it to browse and search the structures of the plant.

Process Portal

Collection of software that forms the basis for IndustrialIT, and provides the development and
execution environment for 800xA system compliant products.
Contains functionality for efficient control and supervision of an automated process. Key
functions are presentation of graphics, process dialogs, and presentation of alarms and trends.

Project Explorer

The part of the Control Builder M user interface used to create, modify and navigate a project. All
objects such as data types, functions and function block types can be selected and displayed in
an editor. All software and hardware can be configured in the Project Explorer.

Property
(Object property)

Aspect Objects can have properties. A property is a named data item that is related to an Aspect
Object. Properties are typically owned and managed by aspect systems

Remote I/O

Input/Output units connected to a controller via a fieldbus.

RNRP

Redundant Network Routing Protocol. An ABB protocol for redundancy handling and routing in
Control Network.

Router

A computer/device that forwards IP data among the networks to which it is connected.

Service

A software component that provides a certain set of functions in the system, typically for use by
various client applications.

Service provider

A Windows process that runs on a specified server node using the Industrial IT service account.
A service provider implements a part of a service for the 800xA system. Service providers may
be redundant and all service providers within the same service group implements the same
function.

Structure

A hierarchical tree organization of Aspect Objects that describes the dependencies between the
real objects. An Aspect object can exist in multiple structures, for example both in a Functional
structure and in a Location structure.

System

Collects all data of an engineering project. They are administered by the configuration wizard
application of the System 800xA platform. Project is a synonym for system.

System 800xA platform

A collection of software that forms the basis for an IndustrialIT system, and provides the
development and execution environment for IndustrialIT compliant applications. The System
800xA platform includes the Aspect Framework.

Tag

Any Aspect Object in the Control Structure which has a faceplate aspect attached.

Thin client

Web browser connected to the Internet (or Intranet). It does not require any ABB-related pre
loaded software. It supports ActiveX controls, but communicates with 800xA system only through
Internet technologies. Internet Explorer is used as browser.

Workplace

User interactive functions that are combined for a particular use case, e.g., Operator Workplace,
Engineering Workplace, etc. A node that runs one or several workplace applications.

S-ar putea să vă placă și