Documente Academic
Documente Profesional
Documente Cultură
Pgina 1 de 5
Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 938H WHEEL LOADER JKM
Configuration: 938H Wheel Loader JKM00001-UP (MACHINE) POWERED BY C6.6 Engine
Troubleshooting
C6.6 Engines For Caterpillar Built Machines
Media Number -KENR5392-06
i02708022
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 28/05/2015
Pgina 2 de 5
There are no active diagnostic codes for the oil pressure sensor or for the atmospheric pressure
sensor.
Engine oil pressure is in the "LEVEL 3" area in Illustration 3 for four seconds.
Illustration 1
g01269377
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 28/05/2015
Illustration 2
Pgina 3 de 5
g01269382
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 28/05/2015
Illustration 3
Pgina 4 de 5
g01269384
System Response:
360-1
The ECM will generate a SPN 100-FMI 17 event code on the J1939 data link. This will generate a
warning on the display on the control panel while the warning is active.
The ECM will generate a E360-1 event code.
360-2
The ECM will generate a SPN 100-FMI 18 event code on the J1939 data link. This will generate a
warning on the display on the control panel while the warning is active.
The ECM will generate a E360-2 event code.
The electronic service tool will display "Engine Derate" in the first "Engine Status" box on any status
screen on the electronic service tool.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 28/05/2015
Pgina 5 de 5
360-3
The ECM will generate a SPN 100-FMI 01 event code on the J1939 data link. This will generate a
warning on the display on the control panel while the warning is active.
The ECM will generate a E360-3 event code.
360-1
Engine operation is not affected.
360-2
The ECM will derate power by 17.0 percent per second up to a maximum of 100 percent while the
derate is active.
360-3
The ECM will derate power by 17.0 percent per second up to a maximum of 100 percent while the
derate is active.
The engine will not shut down in this application.
Test Step 1.
Refer to Troubleshooting, "Low Engine Oil Pressure".
Results:
OK - STOP
Copyright 1993 - 2015 Caterpillar Inc.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 28/05/2015