Documente Academic
Documente Profesional
Documente Cultură
HS 8030 HD
Dimensions
Basic machine with undercarriage
2480
5150
250
890
970
2110
4150
1590
110
2070
4140
5000
600
1060
3700
560
R3
9500
Operating weight
Remarks
1. The lifting capacities stated are valid for lifting operation only
(corresponding with crane classication according to F.E.M.
1.001, crane group A1).
Total weight
approx. 34.7 t
Ground pressure
Ground bearing pressure
0.69 kg/cm2
5. For max. wind speed please refer to lift chart in operators cab
or manual.
6. Working radii are measured from center of swing and under
load.
7.
Equipment
Main boom (No. 0808.xx) max. length
22 m
Fixed jib (No. 0403.xx)
upon request
Modular designed equipment for crane or clamshell operation.
HS 8030 HD
10825
3420
4300
600
5000
1060
2500
includes the basic machine (ready for operation) with boom foot
(6 m), boom head (3.5 m), hinged section (0.5 m), hook block (30 t)
and counterweight (5.9 t).
250
3410
2480
34.7 t
13825
3420
3000
10000
600
5000
1060
2500
includes the basic machine (ready for operation) with boom foot
(6 m), boom head (3.5 m), hinged section (0.5 m), 2x boom section
(3 m), hook block (30 t) and counterweight (5.9 t).
250
3410
2480
35.5 t
16825
3000
3000
10300
3420
600
5000
1060
includes the basic machine (ready for operation) with boom foot
(6 m), boom head (3.5 m), hinged section (0.5 m), 4x boom section
(3 m), hook block (30 t) and counterweight (5.9 t).
2500
250
3410
2480
36.3 t
HS 8030 HD
985
Boom section
(No. 0808.xx)
Width
Weight
3 m
930 mm
395 kg
3185
Hooks
30 t hook block 1 sheave
700
Width
Weight
250 mm
400 kg
1400
350
1000
HS 8030 HD
10 t single hook
Width
Weight
350 mm
330 kg
Technical description
HS 8030 HD
Engine
Main winches
Power rating according to ISO 9249, 180 kW (241 hp) at 2000 rpm
Engine type
Liebherr D 934 A7 SCR
Fuel tank
470 l capacity with continuous level
indicator and reserve warning
Engine complies with NRMM exhaust certication EPA/CARB Tier 4i
or 97/68 EC Stage III B.
ECO-Silent-Mode:
For work not requiring high engine power, the diesel engine can be
operated in the ECO-Silent-Mode (e.g. for inserting reinforcement
cages or for lift crane operation).
Due to the ECO-Silent-Mode which can be preselected by the operator
the engine runs with optimum fuel efciency. This lowers consumption
and reduces noise emission.
Winch options:
Line pull (nom. load)
100 kN
Rope diameter
24 mm
Rope speed
0-130 m/min
The winches are outstanding in their compact design and easy
assembly. Clutch and braking functions on the free-fall system are
provided by a compact designed, low wear and maintenance-free
multidisc brake.
The drag and hoist winches use pressure controlled, variable ow
hydraulic motors. This system features sensors that automatically
adjust oil ow to provide max. winch speed depending on load.
Option:
Tagline winch
20 kN with free fall
Crawlers
Hydraulic system
A double axial displacement pump with integrated gearbox supplies
the open loop hydraulic system, allowing all functions to be operated
simultaneously. To minimize peak pressure an automatic working
pressure cutoff is integrated. This spares pumps and saves energy.
The hydraulic oil is cleaned through electronically controlled pressure
and return lters. Possible contamination is signalled in the cabin.
The use of synthetic environmentally friendly (biodegradable) oils is
possible.
Ready made hydraulic retrot kits are available to customize
requirements e. g. powering casing oscillators, hydraulic grabs etc.
Pumps for working tools
Oil tank capacity
Working pressure
2x 239 l/min
500 l
max. 350 bar
Boom lufng
Double-acting cylinder
Max. stroke (from 0- 84)
2050 mm
Boom lufng speed from 15 to 84
23 sec.
Boom angle 0 = transport position
For boom assembly the boom foot can be lowered to -15.5.
0 1.8 km/h
459 kN
600 mm
2500 mm
Control
The core of the Liebherr hydraulic crawler cranes is the Litronic control
system.
Developed and manufactured by Liebherr, this comprehensive system
encompasses all control and monitoring functions and is designed
to withstand extreme temperature changes and the rough heavy
duty tasks common in the construction industry. Complete machine
operating data, warnings and failure indications are clearly displayed in
the required language on the high resolution monitor in the operators
cab.
Documentation of operating data (PDE) enables optimum diagnosis as
well as early detection and prevention of more serious defects.
An electro-hydraulic proportional control allows several movements to
be performed simultaneously. This ensures that all categories of loads
can be positioned with utmost precision.
Options:
s 0$%0ROCESSDATARECORDING
s '3-'023TELEMATICSMODULE
Swing
Consists of roller bearing with internal teeth for lower tooth ank
pressure, xed axial piston hydraulic motor, spring loaded and
hydraulically released multidisc holding brake, planetary gearbox and
pinion.
Swing speed from 0 3.5 rpm continuously variable.
Noise emission
Noise emissions correspond with 2000/14/EC directive on noise
emission by equipment used outdoors.
HS 8030 HD
Equipment
HS 8030 HD
Clamshell
2 x 100 kN
0130 m/min
6t
Winch options
Line speed 1st layer
2 x 100 kN
0130 m/min
Equipment
Casing oscillator
Casing oscillator
Winch options
Line speed 1st layer
Max. drilling diameter
2 x 100 kN
0130 m/min
1000 mm
HS 8030 HD
Load chart for duty cycle operation (Main boom No. 0808.xx)
5.9 t counterweight
Capacities in metric tonnes for boom lengths (10 m - 22 m) - with 100 kN winches
Boom length (m)
Radius
10
13
16
19
22
(m)
14.9
14.9
14.9
14.0
14.9
13.2
12.7
11.3
12.0
11.3
10.1
9.5
8.4
9.1
8.5
8.1
7.6
6.8
7.4
7.1
6.7
6.3
5.7
6.3
6.0
5.7
5.3
4.8
5.5
5.2
4.9
4.6
4.2
4.8
4.5
4.3
4.0
3.7
3.9
3.8
3.5
3.2
10
kN
100
Rope diameter
mm
24
kN
355
10
15.2
1) Lifting a load exceeding the line pull of one winch is only allowed
if it can be ensured that each individual winch is not overloaded.
When working with a mechanical 2-rope grab the total load
to be lifted is limited by the line pull of one winch.
Rigging and ropes are part of the load.
2) Max. capacities in metric tonnes do not exceed 75% of
tipping load. Crane standing on rm, horizontal ground.
Capacities in duty cycle operation are for reference only and are not programmed in the LMI system.
All loads and counterweight congurations are max. values and must not be exceeded.
Weight of additional equipment on boom (e.g. walkways, hose drums etc.) must be deducted to get the net capacity.
HS 8030 HD
Clamshell equipment
5.9 t counterweight
1500
alpha
K
J
Working diagram
65
60
55
50
45
40
35
30
25
C
(m)
4.4
5.2
6.0
6.6
7.3
7.9
8.4
8.9
9.3
10
J
(m)
11.0
10.6
10.2
9.6
9.1
8.4
7.7
7.0
6.2
(t)
10.5
8.6
7.5
6.6
6.0
5.6
5.2
4.9
4.6
C
(m)
5.7
6.7
7.7
8.6
9.4
10.2
10.9
11.5
13
J
(m)
13.8
13.2
12.6
11.9
11.2
10.3
9.4
8.5
(t)
7.4
6.3
5.4
4.8
4.3
3.7
2.8
2.2
counterweight 5.9 t
C
(m)
8.2
9.7
11.1
19
J
(m)
19.2
18.4
17.5
(t)
4.4
3.6
2.6
C
(m)
9.5
11.2
22
J
(m)
21.9
21.0
(t)
3.4
2.4
HS 8030 HD
Main boom
84 30
(No. 0808.xx)
5.9 t counterweight
85
26
80
25
80
75
70
24
23
60
22
70
65
84
21
22
50
20
19
60
55
18
19
17
45
40
16
50
15
16
14
13
11
35
13
12
30
40
10
10
30
25
9
8
7
20
6
5
15
4
10
3
2
5
1
0
0
22
21
70
20
65
19
18
60
17
16
55
15
14
50
45
13
12
40
11
35
10
30
25
20
15
10
0m
0 ft
Length
Boom foot
Hinged section
6.0 m
0.5 m
10
13
16
19
22
Boom section
3.0 m
Boom head
3.5 m
10
HS 8030 HD
Load chart for lift crane operation (Main boom No. 0808.xx)
5.9 t counterweight
Capacities in metric tonnes for boom lengths (10 m - 22 m) - with 100 kN winches
Boom length (m)
Radius
10
13
16
19
22
t
(m)
29.4
29.3
29.1
29.0
28.5
28.5
24.2
22.0
19.6
22.3
20.9
19.4
17.1
15.6
16.4
15.6
14.9
14.1
12.8
12.5
12.3
11.8
11.3
10.8
9.7
9.9
9.7
9.3
8.9
7.8
8.0
8.1
7.8
7.5
6.4
6.6
6.7
6.6
6.3
10
5.5
5.6
5.6
5.5
12
4.0
4.1
4.1
4.1
3.0
3.0
3.0
14
16
2.3
2.2
TLT 10579752 M99999 Vorab1
HS 8030 HD
11