Documente Academic
Documente Profesional
Documente Cultură
Baudrand, D. W. Metals Hand Book, 8th Edition. Ohio, USA: American Society for
Metals. 1978.
Bhattacharyya, A. Metal Cutting Theory and Practice. pp. 53, 120. Calcutta: New
Central Book Agency (P) Ltd. 1996.
Boothroyd, Geoffrey. Fundamentals of Metal Machining and Mahcine Tools. pp. 92104, Washington D.C., USA: Scripta Book Company. 1975.
Broberg, K. Bertram. Crack and Fracture. pp. 14-15, Cambridge, UK: Cambridge
University Press. 1999.
Caddell, Robert M. Deformation and fracture of Solids. p. 208, NJ, USA: PrenticeHall Inc. 1980.
Bibliography
Childress, F. G., Eary, S. H., and McLaughlin, J. E. Cleaning and Protecting LASL
Laser Mirrors, Y/DA-7591, p. 23, Union Carbide Corporation-Nuclear Division, Oak
Ridge Y-12 Plant, Oak Ridge, Tennessee, March 1978.
Collins, Jack A. Failure of Materials in Mechanical Design. p. 34, NY, USA: John
Wiley & Sons. 1993.
99
Bibliography
Jared, Bradley H., Thomas A. Dow. Investigation and prediction of chip geometry in
diamond turning. Precision Engineering, Vol. 24, pp. 88-96. 2000.
Kui, Liu. Ductile Cutting for Rapid Prototyping of Tungsten Carbide Tools. Ph.D
Thesis, National University of Singapore. 2002.
Mallory, Glenn O., Juan B. Hajdu. (ed). Electroless plating: fundamentals and
applications. Chapter 4, pp. 111-135, Orlando, Florida, USA: American Electroplaters
and Surface Finishers Society. 1990.
Bibliography
Oomen, J. M., Philips Research Laboratories, Eindhoven, The Netherlands. Personal
Communication, 13th August, 2003.
Saxena, Ashok. Nonlinear Fracture Mechanics for Engineers. pp. 8-11, Forida, USA:
CRC Press LLC,. 1998.
Spencer, L. F., Electroless Nickel Plating A Review, Metal Finishing, pp. 58-64,
December 1974.
Syn, C. K., J. S. Taylor, and R. R. Donaldson. Diamond tool wear vs. cutting distance
on electroless nickel mirrors. Proc. SPIE, Vol. 676, pp 128-140. 1986.
101
Bibliography
Taheri, Ray. Evaluation of Electroless Nickel-Phosphorous (EN) Coatings. Ph.D
Thesis, University of Saskatchewan, Canada. Spring, 2003.
Trent, Edward M., Paul K. Wright. Metal Cutting, 4th Edition. pp. 62-74, MA, USA:
Butterworth Heinemann. 2000.
Yan, Jiwang, Katsuo Syoji, Tsunemoto Kuriyagawa, Hirofumi Suzuki. Ductile regime
turning at large tool feed, Journal of Materials Processing Technology, 121. pp. 363372. 2002.
Yan, Jiwang, Katsuo Syoji, Junichi Tamaki. Some observations on the wear of
diamond tools in ultra-precision cutting of single-crystal silicon, Wear, 255. pp. 13801387. 2003.
http://machine-tools.netfirms.com/01_chip_formation.htm#discontinuous
26th September, 2003.
102