Documente Academic
Documente Profesional
Documente Cultură
PacDriveTM
ENI-4 Server
PD_OperaMa_ENI-4_en.doc
Article number: 17130107-001
Edition: 10.2004
Impressum
IMPRINT
All rights reserved to ELAU AG, also in case of patent right
applications.
No part of this documentation and the related software and firmware
may be reproduced, rewritten, stored on a retrieval system, transmitted
or translated into any other language without the express written consent
of ELAU AG.
Any possible measure was taken to ensure that this product
documentation is complete and correct. However, since hardware and
software are continuously improved, ELAU makes no representations or
warranties with respect to the contents of this documentation.
Trademarks:
PacDrive is a registered trademark of ELAU AG.
All other trademarks mentioned in this documentation are the exclusive
property of their manufacturers.
Page 2
ELAU AG
Dillberg 12
D-97828 Marktheidenfeld
ELAU Inc.
165 E. Commerce Drive
Schaumburg, IL 60173
Phone:
Fax:
eMail: info@elau.de
Internet: http://www.elau.de
info@elau.com
http://www.elau.com
User Manual
PD_OperaMa_ENI-4_en.doc
ELAU AG
Contents
PD_OperaMa_ENI-4_en.doc
Contents
1
General
1.1
1.1.1
1.1.2
1.1.3
1.1.4
Overview .....................................................................................................................5
Supported Database Systems....................................................................................5
Communication with the ENI-4 Server .......................................................................5
ENI-4 in Combination with EPAS-4 ............................................................................5
Installation and Start ...................................................................................................6
1.2
1.2.1
1.2.2
Installation
2.1
2.1.1
2.1.2
2.2
2.2.1
2.2.2
2.2.3
2.2.4
2.3
2.3.1
2.3.2
21
Licensing
23
4.1
General .....................................................................................................................23
4.2
4.2.1
4.2.2
4.3
4.4
5.1
5.1.1
5.1.2
5.2
5.2.1
Appendix
6.1
6.1.1
6.1.2
ENI Control................................................................................................................33
Starting ENI Control..................................................................................................33
Starting ENI Admin ...................................................................................................35
6.2
ELAU AG
31
33
User Manual
Page 3
Contents
Further Literature ......................................................................................................38
6.4
6.5
Index .........................................................................................................................41
PD_OperaMa_ENI-4_en.doc
6.3
Page 4
User Manual
ELAU AG
1.1 Overview
General
This document gives an overview of the functionality of ENI-4. At the
same time, it includes an instruction for the installation and initial
configuration of the ENI-4 server with regard to the connection of an
EPAS-4 project to a database. The programs ENI Admin and ENI Control,
which are needed for the administration of the ENI-4 Server, are installed
at the same time. The tool ENI Explorer can be installed by means of the
user-defined installation.
1.1
Overview
ENI-4 is the ENgineering Interface of the EPAS-4 programming system. It
consists of a server and a client part. The ENI-4 server runs as a
separate service. Typical clients are one or several EPAS-4
programming systems and tools accessing the same sources managed
in a common data storage system. The use of ENI-4 offers some
essential advantages. For the work with EPAS-4, it permits a version
management for EPAS-4 projects, multi-user operation and access to
the project database by external programs.
1.1.1
1.1.2
1.1.3
PD_OperaMa_ENI-4_en.doc
ELAU AG recommends not to use ENI for versions older than EPAS-4
V16.
ELAU AG
User Manual
Page 5
General
1.1.4
1.2
System Requirements
1.2.1
Windows 2000
Windows XP Professional
NOTE
If you are using ENI-4 for version management, additionally observe the
system requirements of the version management software!
1.2.2
Hardware
PD_OperaMa_ENI-4_en.doc
Page 6
User Manual
ELAU AG
Installation
By all means, you should observe the following order when installing the
ENI-4 server.
Installing the Version Management Tool (see chapter 2.1)
Installing the ENI-4 Server (see chapter 2.2)
Administration and Configuration of the ENI-4 Server (see chapter 2.3)
NOTE
The following points must absolutely be observed during the installation:
2.1
To install and manage the ENI-4 Server, the user must have
administrator rights.
If you want to use the ENI-4 without Version Management Tool, you
can skip the chapter Installing the Version Management Tool.
PD_OperaMa_ENI-4_en.doc
ELAU AG
User Manual
Page 7
Installation
2.1.1
2.1.2
PD_OperaMa_ENI-4_en.doc
Page 8
User Manual
ELAU AG
PD_OperaMa_ENI-4_en.doc
ELAU AG
User Manual
Page 9
Installation
2.2
2.2.1
2.2.2
Installation
How to install the ENI-4 server:
Insert ENI-4 Server installation CD.
Select the language to be used for the installation.
Activate the option Install this application for: Anyone who uses this
computer (all users)!
Page 10
User Manual
ELAU AG
PD_OperaMa_ENI-4_en.doc
Then enter the target path to which you wish to install the ENI-4 Server.
PD_OperaMa_ENI-4_en.doc
ELAU AG
User Manual
Page 11
Installation
If there were any problems during the installation, please restart the
setup. By all means observe the order of installation.
Page 12
User Manual
ELAU AG
PD_OperaMa_ENI-4_en.doc
2.2.3
PD_OperaMa_ENI-4_en.doc
This opens the dialog window ENI Control with the category
Database, where the user can set the driver for the desired database
as described below.
ELAU AG
User Manual
Page 13
Installation
Now select the driver you need for your database. Depending on your
selection, continue the installation in the corresponding section. Make
the settings required for the chosen driver.
You can find all installed drivers in the selection box next to 'Select
Database Driver'. If the desired driver is not included in the list, click on
the first button next to the list and select the corresponding driver file on
the computer. The following driver files are currently available:
As the root folder, enter the directory you created during your
preparation.
To set the path, you can use the browse dialog, which is opened by
double-clicking on the input field.
Do not change the ENI user name. ENI should be entered here.
Enter the project path you created during your preparation. This path
must include the file *.pi!
To set the path, you can use the browse dialog, which is opened by
double-clicking on the input field.
In the field Temporary folder you can enter a folder for saving
temporary files.
Under Host, enter the name of the database computer.
Under Port, enter the port of the database computer. (Default: 7001 if no
changes were made during the installation of the database).
Under ENI user, enter a specific user account used by the ENI-4 Server
for internal tasks. This account must have been created in the user
management of the database. In the field ENI password, enter the
password for the above user account.
Location of 'srcsafe.ini':
Enter the project path you created during your preparation. The directory
with this project path must include the file "srcsafe.ini"!
To set the path, you can use the browse dialog, which is opened by
double-clicking on the input field.
Temporary folder:
The field Temporary folder has no relevance when using the version
management tool.
ENI user, ENI password:
Do not change the default settings for ENI User and ENI password,
unless you previously created a separate account for the ENI-4 in
Page 14
User Manual
ELAU AG
PD_OperaMa_ENI-4_en.doc
Root project:
If you created a root project when creating the project with VSS 6.0,
enter it in the field Root project.
PVCS
Version Manager
Projects File:
Several databases of PVCS Version Manager can be addressed via the
ENI-4. For this purpose, the databases need to be made known to the ENI4. This requires the file Projects.ini. All databases and the corresponding
archives to be addressed via the ENI-4 must be entered in this file. If a new
database is created, the file needs to be adjusted. A sample file can be
found in the ENI-4 program folder
(Default: C:\Program Files\ELAU\ENI-4 V1\Projects.ini).
It must be a plain text file with the following structure:
[Projects]
xxx=yyy
default=yyy
[Archives]
xxx=yyy\archives
default=yyy\archives
The entries [Projects] with the keyword "default" and [Archives] with the
keyword "default" are important. They must always exist. The existing
databases are entered in the [Projects] section, while the archives of the
respective databases from the [Projects] section are entered in the
[Archives] section (usually this means adding \archives to the project
name). In addition to the keyword default, you always have to enter the
database directory of the default database and the archive directory of
the matching database after the = sign. You can enter any number of
databases. Please note that the placeholder xxx represents the name of
the database in the ENI-4 and yyy always represents the folder of the
corresponding database.
Example:
PD_OperaMa_ENI-4_en.doc
[Projects]
Datenbank_01=d:\Datenbank_02
Datenbank_02=d:\Datenbank_03
default=d:\Datenbank_01
[Archives]
Datenbank_01=d:\Datenbank_02\archives
Datenbank_02=d:\Datenbank_03\archives
default=d:\Datenbank_01\archives
User Manual
Page 15
Installation
Temporary folder:
Enter the temporary folder you created when creating the new project
database PVCS VM (in this example, C:\temp).
ENI-4 user, ENI-4 password:
As soon as the option "Access control database security" is activated in
PVCS VM, you have to enter a user and password that is valid in PVCS
VM. A user eni was created during the installation of PVCS Version
Manager. For this reason, enter the user eni with password eni.
PVCS Dll Path:
Enter the path to the file vmwfdtk.dll. Example: If you installed PVCS VM
in the directory
c:\Program Files\vm, you have to enter the following path:
"c:\Program Files\pvcs\vm\common\bin\win32" (If you selected the
default path during the installation of PVCS VM, you do not need to
make any settings here).
PVCS Configuration File:
Enter the path of the configuration file (*.cfg). By default, it is located in
the subdirectory archives of the project directory you created when
creating the new project database PVCS VM (in this example,
"d:\PVCS_ENI-4_Project_Folder\archives"). This directory includes a file
with the extension *.cfg. Please select this file in the file selection box. All
other databases have to use the same configuration file. For this reason,
you should always select "Use an existing Configuration File" and "Use
an existing Access Control Database" in the tab "Advanced" when
creating new projects.
Update PVCS GUI?:
Enables an automatic update of the PVCS surface. Please note that it takes
more time to create and delete objects, rather than to deactivate the option.
NOTE
To update the PVCS GUI surface automatically, an Access Control
Database must be set. The login dialog must be activated in the menu
"Configure->General->Security->Login Sources" and it must be at the
top of the list.
When using the PVCS Version Manager, also observe the notes in
Chapter "Completing the Installation"!
Page 16
User Manual
ELAU AG
PD_OperaMa_ENI-4_en.doc
2.2.4
NOTE
If PVCS Version Manager is used as a version management tool, a
special account must be created for the service ENI-4 Server.
How to create a special account for the ENI-4 Server:
Create a separate account in the user management of the operating
system on the ENI-4 server.
(Give the account administrator rights; the password must not
change or expire).
Start->System management->User accounts
NOTE
The ENI-4 server is now fully functional for 30 days. After expiry of
those 30 days, the ENI-4 Server can only be used locally. Therefore you
should contact ELAU AG immediately after the installation in order to
obtain a permanent license for the ENI-4 Server. Please note Chapter
4.0.
PD_OperaMa_ENI-4_en.doc
ELAU AG
User Manual
Page 17
Installation
2.3
The software also includes the installation of the programs ENI Control
and ENI Admin for the administration and handling of the ENI-4. If you
opt for a user-defined installation (select Tools!) you can additionally
select the tool ENI Explorer. However, this program is not serviced and
maintained by ELAU AG. Should you have any questions on handling
ENI-4 Explorer, please check the online help.
NOTE
ENI Control and ENI Admin must be started separately, but cannot run
at the same time. After the installation, these programs can be found in
the Start menu of the ENI-4 Server. They are also available via the
menu that opens when you right-click on the ENI icon in the task bar.
2.3.1
ENI Control
With ENI Control, you can make basic server settings that cannot be
changed during operation, e.g. database connection, communication
settings etc. Moreover, the ENI-4 Server can be started and terminated
with ENI Control.
PD_OperaMa_ENI-4_en.doc
Page 18
User Manual
ELAU AG
2.3.2
ENI Admin
With ENI Admin, you can configure users, groups and access rights and
execute license management functions even during operation.
User administration can be organized with the tool ENI Admin.
NOTE
In connection with ENI Admin, please observe the following notes:
The tool ENI Admin can only be started if the ENI-4 Server is
running.
PD_OperaMa_ENI-4_en.doc
For Visual SourceSafe, for example, use Visual SourceSafe Admin for
user administration. Make sure that the right database is opened in the
version management tool.
ELAU AG
User Manual
Page 19
PD_OperaMa_ENI-4_en.doc
Installation
Page 20
User Manual
ELAU AG
PD_OperaMa_ENI-4_en.doc
Confirm with OK
Now the selected function blocks you configured in the optional dialog
Project objects are linked to the database. For these function blocks, all
typical database functions are now available in the context menu.
ELAU AG
User Manual
Page 21
PD_OperaMa_ENI-4_en.doc
Page 22
User Manual
ELAU AG
4.1 General
Licensing
4.1
General
In the installation procedure, select the driver you need for your version
management tool and/or file system. Then you can test the ENI-4 Server
for 30 days free of charge.
NOTE
The license expires automatically after 30 days. After that, you can use
the ENI-4 Server only from the local host. For this reason, it is
absolutely necessary to extend your license in good time before the 30day demo mode expires. We recommend that you contact ELAU AG as
soon as you have completed the installation.
4.2
4.2.1
PD_OperaMa_ENI-4_en.doc
ELAU AG
User Manual
Page 23
Licensing
NOTE
This dialog shows the actual licensing information. If no licensing
procedure has been executed, the value for "Max. user count:" is
"three", the value for "Expires" is "in 29 days".
Step 2
Step 3
(If the server is licensed for the first time, you need to select the module
ENI-4 Server in another window).
Desired value: New value must be identical with the ELAU order
(equivalent to the number of workplace licenses ordered).
Page 24
User Manual
ELAU AG
PD_OperaMa_ENI-4_en.doc
NOTE
NOTE
In this dialog you are now required to contact ELAU AG to give us the
Module ID, feature changes and Request Key. All data are case
sensitive!!!
PD_OperaMa_ENI-4_en.doc
Click on the button Finish to check the license key and take it over into
the system. If there is an error message, click on the button Back to
return to the dialog showing "Module ID", "feature changes" and
"Request Key". Compare the date shown there to the ELAU data.
ELAU AG
User Manual
Page 25
Licensing
After you close the dialog, the License Management box shows the
new values.
Then you need to stop and restart the ENI-4 Server. This is indicated by
a message box:
4.2.2
NOTE
This dialog shows the actual licensing information. If no licensing
procedure has been executed, the value for "Max. user count:" is
"three", the value for "Expires" is "in 29 days".
Page 26
User Manual
ELAU AG
PD_OperaMa_ENI-4_en.doc
Step 2
Step 3
(If the server is licensed for the first time, you need to select the module
ENI-4 Server in another window)
NOTE
Desired value: New value must be identical with the ELAU order
(equivalent to the number of workplace licenses ordered).
PD_OperaMa_ENI-4_en.doc
ELAU AG
User Manual
Page 27
Licensing
PD_OperaMa_ENI-4_en.doc
The button Finish closes the wizard and creates an e-mail message.
Page 28
User Manual
ELAU AG
Once you received the message with the license key from ELAU, open
the License Management dialog again.
Click on Install to upload the license key saved in the file (*.3sl).
.
Once you clicked on the file and selected it with Open, the new license
key is read in.
PD_OperaMa_ENI-4_en.doc
After you close the window, the new values are shown in the License
Management box (you may have to close the License Management
box and reopen it so that the license information matches the expected
result).
ELAU AG
User Manual
Page 29
Licensing
Then stop the ENI-4 Server and restart it. This is indicated by a message
box:
4.3
In all three cases, you need to request a new license from ELAU AG.
4.4
Page 30
User Manual
PD_OperaMa_ENI-4_en.doc
ELAU AG
5.1
5.1.1
5.1.2
5.2
5.2.1
PD_OperaMa_ENI-4_en.doc
Labeling
ELAU AG
User Manual
Page 31
PD_OperaMa_ENI-4_en.doc
Page 32
User Manual
ELAU AG
Appendix
6.1
ENI Control
6.1.1
PD_OperaMa_ENI-4_en.doc
ELAU AG
User Manual
Page 33
Appendix
NOTE
The tool is delivered without administrator password. In this case you
can simply confirm the dialog with OK without entering a password. If
desired, you can enter a password of your own; this will be used as
administrator password.
PD_OperaMa_ENI-4_en.doc
Page 34
User Manual
ELAU AG
6.1.2
When you start the tool, you have to enter an administrator password.
NOTE
PD_OperaMa_ENI-4_en.doc
ELAU AG
User Manual
Page 35
Appendix
PD_OperaMa_ENI-4_en.doc
Page 36
User Manual
ELAU AG
6.2
Contact Addresses
For Repair
Please send components to be repaired or checked, along with the error
report, to this address:
ELAU AG
Abt. Kundendienst
house address:
Postfach 1255
Dillberg 12
97821 Marktheidenfeld
97828 Marktheidenfeld
Telephone: +49 (0) 93 91 / 606 - 142
Fax:
+49 (0) 93 91 / 606 340
Service team
Should you need to talk to a member of our service team or need
service at your site, please contact:
ELAU AG
Dillberg 12
97828 Marktheidenfeld
Tel.:
+49 (0) 93 91 / 606 - 0
Fax:
+49 (0) 93 91 / 606 - 300
e-mail:
info@elau.de
Internet: www.elau.de
ELAU, Inc.
ELAU Inc.
165 E. Commerce Drive
Schaumburg, IL 60173
Phone:
+1 847 490 4270
Fax:
+1 847 490 4206
info@elau.com
http://www.elau.com
ELAU SYSTEMS ITALIA S.r.l.
Via Tosarelli 300
I-40050 Villanova di Castenaso (BO)
Tel.:
+39 051 / 7818 70
Fax:
+39 051 / 7818 69
e-mail:
info@elau.it
Internet: www.elau.it
NOTE
PD_OperaMa_ENI-4_en.doc
ELAU AG
User Manual
Page 37
Appendix
6.3
Further Literature
User Manual
ELAU AG
PD_OperaMa_ENI-4_en.doc
* = in preparation
ELAU AG
User Manual
Page 39
Appendix
6.4
Product Training
We offer a variety of training courses on our products.
Our seminar leaders, who have several years experience, will enable
you to make the best possible use of the vast possibilities of the
PacDrive system.
NOTE
PD_OperaMa_ENI-4_en.doc
Page 40
User Manual
ELAU AG
6.5 Index
6.5
Index
Administrator Password 13
C
contact addresses 37
Projects File 15
PVCS 15
PVCS Configuration File 16
PVCS Dll Path 16
ENI Admin 19
ENI Control 18
ENI password 14
ENI user 14
ENI-4 Server
repair 37
Root project 14
FAQ 31
File System Driver 14
service team 37
Source Safe 6.0 14
srcsafe.ini 14
system requirements 6
install 10
I
IMPRINT 2
Installation 7
T
Temporary folder 14, 16
L
license 23
License Management 26
Location of ss.exe 15
M
U
Update PVCS GUI 16
V
Version Management Tool 7
PD_OperaMa_ENI-4_en.doc
ELAU AG
User Manual
Page 41