Documente Academic
Documente Profesional
Documente Cultură
Atterberg limits: 1)
Max Plasticity Index BS 1377: Part 2
Max Linear Shrinkage BS 1377: Part 2
Grading: BS 1377: Part 2
Non-plastic
3
Grading limits - CRR
(% passing sieve) 2)
37.5
28
20
10
5
2
1.18
0.425
0.075
Particle strength and shape
Minimum TFVdry BS 812 :Part 111
Ratio dry to soaked value of
TFV BS 812 :Part 111
Maximum flakiness index BS 812: Part
105
Fine type
100
87-97
62-77
44-62
27-45
22-38
13-27
5-12
110 kN
1)
It is emphasised that the Atterberg limits shall be measured according to BS 1377: Part 2. Other laboratory test
procedures and equipment may not give comparable results and shall not be used unless proper correlation to BS has
been carried out to the satisfaction of the Engineer.
2)
The base course material on the road after final compaction shall comply with above grading limits.
UNIT
CRUSHED AGGREGATE
CUBIC METRE
CUBIC METRE
(m3)
(m3)
PAGE 3000 - 37