Documente Academic
Documente Profesional
Documente Cultură
2.1 Introduction
EN ISO 3834-2 defines comprehensive quality requirements for fusion welding in w
orkshops
and/or on site. Therefore compliance to the requirements of this part should pro
vide the best
quality level achievable for the welding fabrication activities.
2.2 Requiremen Requirements review and technical review
The Manufacturer shall review the contractual and any other requirements togethe
r with any
technical data relevant to the welding fabrication activities, in order to verif
y that the work content is
within its capability to perform, that sufficient resources are available to ach
ieve delivery schedules
and that dohe purchaser2 to provide all the necessary data.
Moreover the Manufacturer shall identify any variation between the final contrac
t and previous
quotations andcumecumentation is clear and unambiguous. All information necessar
y to carry out the
manufacturing operations shall be therefore available prior to the commencement
of the work,
otherwise it should be asked the purchaser2 to provide all the necessary data.
Moreover the Manufacturer shall identify any variation between the final contrac
t and previous
quotations and notify the purer shall review the contractual and any other requi
rements together with any
technical data relevant to the welding fabrication activities, in order to verif
y that the work content is
within its capability to perform, that sufficient resources are available to ach
ieve delivery schedules
and that documentation is clear and unambiguous. All information necessary to ca
rry out the
manufacturing operations shall be therefore available prior to the commencement
of the work,
otherwise it should be asked tntation is clear and unambiguous. All information
necessary to carry out the
manufacturing operations shall be therefore available prior to the commencement
of the work,
otherwise it should be asked the purchaser2 to provide all the necessary data.
Moreover the Manufacturer shall identify any variation between the final contrac
t and previous
quotations and notify the purer shall review the contractual and any other requi
rements together with any
technical data relevant to the welding fabrication activities, in order to verif
y that the work content is
within its capability to perform, that sufficient resources are available to ach
ieve delivery schedules
and that documentation is clear and unambiguous. All information necessary to ca
rry out the
manufacturing operations shall be therefore available prior to the commencement
of the work,
otherwise it should be asked t not Requirements review and technical review
The Manufacturer shall review the contractual and any other requirements togethe
r with any
technical data relevant to the welding fabrication activities, in order to verif
y that the work content is
within its capability to perform, that sufficient resources are available to ach
ieve delivery schedules
and that documentation is clear and unambiguous. All information necessary to ca
rry out the