Documente Academic
Documente Profesional
Documente Cultură
BASIC PERFORMANCE
The IC-R9500 achieves amazing perfor- * At 15MHz reception, with 5kHz separation signals.
30 Noise
f loor level [dB] FM filter characteristics
10
0 0
–10
[dBm]
Dynamic range 109.2 dB Antenna input
–20
Receiver output
[dB] 170
–40
150 50 MHz
Intercept Point
130 –60
+9.8 dBm Dual DSP units
110
–80
90
70
±0.05ppm high frequency stability –100
110
+6.2 dBm – 40
90
–60
70
50 – 80
30 Noise –100
f loor level
10
0
–120
–10
[dBm]
Dynamic range 89.5dB Antenna input
OCXO unit –10 –8 –6 –4 –2 0 2 4 6 8 10
[kHz]
performance and spectrum analysis
SPECTRUM SCOPE
Multi function nor mal sp e c tr um s c op e, t he digi t al • Fixed mode ... the scope screen does not shift
spectrum scope scope’s filter width can vary from 200Hz when you change the receiving frequency.
Using a dedicated DSP unit improves the to 20kHz with a variable sweep speed. • Center mode ... the scope screen shifts as
dynamic range of the spectrum scope. The spectrum scope can also be set to the receiving frequency moves. The receiv-
The IC-R9500 has four different spec- use specific scope edges or to center ing frequency is always centered on the
trum modes such as normal/ wide and the span on the receiving frequency. scope screen.
center/fixed width. The normal spectrum The peak search function automatically • Wide band scope receives up to ±500MHz.
scope covers a range from ±2.5kHz to moves the display marker to the stron- • Sweep speed/span/ filter width setting
± 5MHz , w hile t he w ide b and spe c - gest signal on the scope screen. In addi- • Peak search function
tr um scope* observes up to ±500MHz tion to these features, the scope has 3 • Peak hold function
(±10MHz, ±25MHz, ±50MHz, ±100MHz ±250MHz levels of attenuation (10dB, 20dB, 30dB). • Attenuator
and ±500MHz selectable). When using the * While using the wide band scope function, AF output is muted. • Mini scope function
FUNCTIONS
7-inch wide color TFT LCD Two-point manual notch filter VFO-3 for the 1200MHz band, etc. You
The large 7-inch wide (800 × 480 pixels) The digital manual notch filter has a can quickly change the operating bands
a c tiv e ma trix displa y deliv er s quick depth of more than 70dB at two points with the 10-keypad. When the VFO is
response time, high resolution and has a with adjustable filter width (wide, middle, changed, the settings are automatically
wide viewing angle. The multi-function spec- narrow). This means that two strong stored in that VFO channel.
trum scope is displayed in vivid color. The beat signals can be eliminated at once
background color is selectable from black even while using the auto notch filter. A total of
or blue for your preference. In addition, the 1220 memory channels
Manual notch filter characteristics
IC-R9500 has a VGA connector allowing [dB] 10
NARROW MIDDLE WIDE
T he IC-R 9 5 0 0 ha s a t o t al o f 12 20
0
you to connect an external monitor. –10
memor y channels. Store frequencies,
–20 modes, filter width and tuning steps.
Multiple RSSI –30
Memory channels are grouped into 10
– 40
S-meter, dBµ, dBµ(emf) and dBm meter –50 memor y bank s. B y c onnec ting t o a
types are selectable in the IC-R9500. The – 60 USB keyboard, you can edit memor y
– 70
dBµ, dBµ(emf) and dBm meter have ±3dB contents directly.
– 80
of accuracy (10 to 70dBµ signal from 100kHz to – 90 • 1000ch regular memory channels
3335MHz at 25°C). –100
–800 – 600 – 400 –200 0 200 400 600 800 • 20ch scan edge channels
[Hz]
• 100 auto memory write channels
• 100 memory scan skip channels
Synchronous AM detection
S-meter The synchronous AM (S-AM) detection
pr o v ide s le s s dis t or t e d audio than
normal diode detection. This mode is
useful when fading occurs or signal level
Memory setting example
dBm meter is low. The IC-R9500 can recreate the
carrier signal exactly by using the DSP.
Digital voice recorder
In addition, upper or lower sideband
The IC-R9500 has two types of digital
demodulation for S-AM is selectable for
v oice r ecor der s. One is the r egular
dBµ (EMF) meter eliminating interference from adjacent
recorder, recording for long periods in
strong signals.
Noise blanker “WAV ” format into the built-in CF mem-
The IC-R9500 has the DSP controlled noise ory or an external USB memory. The
FSK modulator & decoder
blanker that significantly reduces pulse type sampling rate is variable from 8kHz (SQ1)
The IC-R9500 has built-in FSK demodu-
noise and improves the S/N ratio by remov- to 48kHz (SHQ). In SQ1 mode, up to 130
lator and decoder.
ing interfering noise. The noise blanker has minutes (approx.) of recorded audio can
• Twin peak filter
two channels with adjustable width and be stored into the CF memory. The other
• Water-fall indicator
depth parameters. You can use these to recorder is the shor t voice recorder,
• FSK-R mode
target the specific noise interference. • FSK tone and shift frequencies programmable
which saves the previous 15 seconds of
radio audio into RAM, allowing you to
Noise reduction 10 VFOs play back the audio instantly.
The noise reduction function separates The IC-R9500 has 10 VFO channels for
signal components from random noise tuning and storing operating frequencies,
through Digital Signal Processing (DSP) mode, filter width and other settings.
and enhanc es the signals bur ied in For example, use VFO-1 for the 7MHz
noise for improved signal readability. band, VFO-2 for the VHF marine band,
Voice recorder setting example
ations allowing efficient radio monitoring
Numerous scanning functions to search The IC-R9500 has a USB connector for • Optional CI-V inter face and RS-232C for PC
remote control
for desired stations are a vailable to connecting external USB memory or other
• Analog TV tuner (NTSC/PAL/SECAM)*2
make operation easier. The IC-R9500 USB devices. Received audio and the re-
* 1 Some functions are not available depending on
scans 40 channels per second in mem- ceiver configuration files can be imported operating mode or band.
ory scan mode. and exported to a PC. Firmware upgrades *2 Except USA version
External Speaker Jack Detector Output Jack Main Power Switch Antenna Connector 1/
External DC Output Jack (15.0V) Video Input Jack Data Input Socket HF Antenna Connector 3
ACC Socket Video Output Jack CI-V Remote Control Jack S/P DIF Output Terminal
Antenna Selector Jack Spare Jack RS-232C Connector USB Connector
Reference Frequency In/Out Terminal IF Output Jack External Display Connector HF Antenna Connector 2
Speech Output Jack DC-DC Power Socket Antenna Connector 2 HF Antenna Connector 1
Line Output Jack Fuse Holder Ethernet Connector Ground Terminal
Recorder Remote Jack AC Power Socket
SPECIFICATIONS
GENER AL RECEIVER
Frequency coverage (Unit: MHz) 0.005–3335.000000* Intermediate frequencies
* Cellular bands are blocked in the U.S.A. version. HF 58.7MHz (1st) /10.7MHz (2nd) /48kHz (3rd)
France version 0.005 – 29.999999 VHF/UHF 278.7MHz or 778.7MHz (1st) /
50.200 – 51.200000 58.7MHz (2nd) /10.7MHz (3rd) /48kHz (4th)
87.500 – 108.000000
144.000 – 146.000000 Sensitivity
430.000 – 440.000000 SSB, CW, FSK AM FM FM50k WFM
1240.000 – 1300.000000
0.100 – 1.799MHz*1 0.5µV 6.3µV – – –
Mode USB, LSB, CW, FSK, AM, FM, WFM, P25* 1.800 – 29.999MHz*1 0.2µV 2.5µV 0.5µV*3 0.71µV*3 –
* Optional UT-122 required.
30.0–2499.999MHz*2 0.32µV 3.5µV 0.5µV 0.71µV 1.4µV
Number of memory channels 1220 (1000 regular, 100 auto memory write chan- 2500–2999.999MHz*2 0.32µV 3.5µV 0.5µV 0.71µV 1.4µV
nels, 100 memory scan skip and 20 scan edges) 3000–3335.000MHz*2 1.0µV 11µV 1.6µV 2.2µV 4.5µV
Antenna connectors SO-239 (50 for HF), *1 Preamp1 ON *2 Preamp ON *3 28–29.999MHz
Phono [RCA] (500 for HF), SSB, FSK BW=2.4kHz, CW BW=0.5kHz, AM BW=6.0kHz at 10dB S/N,
FM BW=15kHz, FM50k BW=50kHz, WFM BW=180kHz at 12dB SINAD
Type-N × 2
(50 , one each for 30–1149.99999MHz, 1150 – 3335MHz)
3rd order IMD dynamic range 109dB (typ.) at 14.1MHz, 100kHz separation,
Temperature range 0˚C to +50˚C; +32˚F to +122˚F preamp OFF
Frequency stability Less than ±0.05ppm (at 25˚C)
Selectivity (Representative value)
after warm up (5 minutes)
USB, LSB, FSK (BW= 2.4kHz) More than 2.4kHz / –3dB
Temperature fluctuation Less than ±0.05ppm (0˚C to +50˚C)
Less than 3.6kHz / –60dB
Frequency resolution 1Hz
CW (BW= 500Hz) More than 500Hz / –3dB
Power supply requirement 100V/120V/230V/240V AC
Less than 700Hz / –60dB
Power consumption Stand-by Less than 100VA AM (BW= 6kHz) More than 6.0kHz / –3dB
(Representative value) Max. audio Less than 100VA
Less than 15.0kHz / –60dB
Dimensions (W×H×D) 424 × 149 × 340 mm; FM (BW= 15kHz) More than 12.0kHz / –3dB
(projections not included) 1611⁄16 × 5 7⁄8 × 13 3⁄8 in Less than 25.0kHz / –60dB
Weight 20kg; 44.1lb (approx.) WFM More than 180kHz / –6dB
Spurious and image rejection ratio
0.1 – 30.0MHz More than 70dB
Supplied accessories 30.0 – 2500MHz More than 50dB
• AC power cable • Carrying handles • Spare fuses • ACC plugs 2500 – 3000MHz More than 40dB
• RCA plugs • DC power plug • Speaker plugs
AF output power More than 2.6W with an 8 load
All stated specifications are subject to change without notice or obligation.
OPTIONS
1-1-32, Kami-minami, Hirano-ku, Osaka 547-0003, Japan Phone: +81 (06) 6793 5302 Fax: +81 (06) 6793 0013 URL: http://www.icom.co.jp/world/index.html Count on us!
2380 116th Avenue NE, 146A Harris Road, East Tamaki, Unit 9, Sea St., Herne Bay, 6F No. 68, Sec. 1 Cheng-Teh Road, Your local distributor/dealer:
Bellevue, WA 98004, U.S.A. Auckland, New Zealand Kent, CT6 8LD, U.K. Taipei, Taiwan, R.O.C.
Phone : +1 (425) 454-8155 Phone : +64 (09) 274 4062 Phone : +44 (01227) 741741 Phone : +886 (02) 2559 1899
Fax : +1 (425) 454-1509 Fax : +64 (09) 274 4708 Fax : +44 (01227) 741742 Fax : +886 (02) 2559 1874
E-mail : sales@icomamerica.com E-mail : inquiries@icom.co.nz E-mail : info@icomuk.co.uk E-mail : sales@asia-icom.com
URL : http://www.icomamerica.com URL : http://www.icom.co.nz URL : http://www.icomuk.co.uk URL : http://www.asia-icom.com
Glenwood Centre #150-6165 Highway 17, Communication Equipment Zac de la Plaine, 10C07, Long Silver Mansion, No.88, Yong Ding
Delta, B.C., V4K 5B8, Canada Himmelgeister Str. 100, 1 Rue Brindejonc des Moulinais, BP 45804, Road, Haidian District, Beijing, 100039, China
Phone : +1 (604) 952-4266 D-40225 Düsseldorf, Germany 31505 Toulouse Cedex 5, France Phone : +86 (010) 5889 5391/5392/5393
Fax : +1 (604) 952-0090 Phone : +49 (0211) 346047 Phone : +33 (5) 61 36 03 03 Fax : +86 (010) 5889 5395
E-mail : info@icomcanada.com Fax : +49 (0211) 333639 Fax : +33 (5) 61 36 03 00 E-mail : bjicom@bjicom.com
URL : http://www.icomcanada.com E-mail : info@icomeurope.com E-mail : icom@icom-france.com URL : http://www.bjicom.com
URL : http://www.icomeurope.com URL : http://www.icom-france.com
Unit 1 / 103 Garden Road, Ctra. Rubi, No. 88 "Edificio Can Castanyer" Sopot, 3 maja 54, Poland
Clayton, VIC 3168 Australia 08190, Sant Cugat del Valles, Barcelona, Spain Phone : +48 (58) 550 7135
Phone : +61 (03) 9549 7500 Phone : +34 (93) 590 26 70 Fax : +48 (58) 551 0484
Fax : +61 (03) 9549 7505 Fax : +34 (93) 589 04 46 E-mail : icompolska@icompolska.com.pl
E-mail : sales@icom.net.au E-mail : icom@icomspain.com URL : http://www.icompolska.com.pl
URL : http://www.icom.net.au URL : http://www.icomspain.com
07JY0010 © 2007 Icom Inc. Printed in Japan